From b5fe523bbc2a09069040ca70123246b251cd7daf Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 12 Jan 2020 23:36:13 +0800 Subject: [PATCH] sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai Reviewed-by: Jagan Teki --- arch/arm/dts/Makefile | 9 +- .../dts/sun50i-h5-bananapi-m2-plus-v1.2.dts | 11 ++ .../sun50i-h5-emlid-neutis-n5-devboard.dts | 137 ++----------- arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi | 95 +-------- .../arm/dts/sun50i-h5-libretech-all-h3-cc.dts | 10 +- .../arm/dts/sun50i-h5-libretech-all-h3-it.dts | 11 ++ .../arm/dts/sun50i-h5-libretech-all-h5-cc.dts | 61 ++++++ arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 53 +---- arch/arm/dts/sun50i-h5-nanopi-neo2.dts | 45 +---- arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 47 +---- arch/arm/dts/sun50i-h5-orangepi-prime.dts | 52 +---- arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 11 +- .../arm/dts/sun50i-h5-orangepi-zero-plus2.dts | 46 +---- arch/arm/dts/sun50i-h5.dtsi | 186 +++++++++++++----- .../dts/sun8i-h2-plus-bananapi-m2-zero.dts | 40 +++- arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 2 - arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 22 ++- .../dts/sun8i-h3-bananapi-m2-plus-v1.2.dts | 13 ++ arch/arm/dts/sun8i-h3-beelink-x2.dts | 11 +- .../sun8i-h3-emlid-neutis-n5h3-devboard.dts | 72 +++++++ arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi | 11 ++ arch/arm/dts/sun8i-h3-mapleboard-mp130.dts | 152 ++++++++++++++ arch/arm/dts/sun8i-h3-nanopi-duo2.dts | 173 ++++++++++++++++ arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts | 28 ++- arch/arm/dts/sun8i-h3-nanopi-m1.dts | 2 +- arch/arm/dts/sun8i-h3-nanopi-neo-air.dts | 2 +- arch/arm/dts/sun8i-h3-nanopi.dtsi | 25 +-- arch/arm/dts/sun8i-h3-orangepi-2.dts | 34 +--- arch/arm/dts/sun8i-h3-orangepi-lite.dts | 27 +-- arch/arm/dts/sun8i-h3-orangepi-one.dts | 28 +-- arch/arm/dts/sun8i-h3-orangepi-pc.dts | 27 +-- arch/arm/dts/sun8i-h3-orangepi-plus.dts | 23 ++- arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts | 2 +- arch/arm/dts/sun8i-h3-rervision-dvk.dts | 114 +++++++++++ arch/arm/dts/sun8i-h3.dtsi | 86 +++++++- arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 30 +++ arch/arm/dts/sunxi-bananapi-m2-plus.dtsi | 7 +- arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi | 170 ++++++++++++++++ arch/arm/dts/sunxi-h3-h5.dtsi | 137 ++++++++----- arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi | 65 +++++- arch/arm/dts/sunxi-libretech-all-h3-it.dtsi | 180 +++++++++++++++++ include/dt-bindings/clock/sun8i-h3-ccu.h | 11 +- include/dt-bindings/reset/sun8i-h3-ccu.h | 5 +- 43 files changed, 1550 insertions(+), 723 deletions(-) create mode 100644 arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts create mode 100644 arch/arm/dts/sun50i-h5-libretech-all-h3-it.dts create mode 100644 arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts create mode 100644 arch/arm/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts create mode 100644 arch/arm/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts create mode 100644 arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi create mode 100644 arch/arm/dts/sun8i-h3-mapleboard-mp130.dts create mode 100644 arch/arm/dts/sun8i-h3-nanopi-duo2.dts create mode 100644 arch/arm/dts/sun8i-h3-rervision-dvk.dts create mode 100644 arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi create mode 100644 arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi create mode 100644 arch/arm/dts/sunxi-libretech-all-h3-it.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 04a8cccda5..5075038c6a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -515,8 +515,12 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-bananapi-m2-plus-v1.2.dtb \ sun8i-h3-beelink-x2.dtb \ + sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ + sun8i-h3-mapleboard-mp130.dtb \ + sun8i-h3-nanopi-duo2.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ @@ -528,7 +532,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ - sun8i-h3-orangepi-zero-plus2.dtb + sun8i-h3-orangepi-zero-plus2.dtb \ + sun8i-h3-rervision-dvk.dtb dtb-$(CONFIG_MACH_SUN8I_R40) += \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-v40-bananapi-m2-berry.dtb @@ -538,6 +543,8 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ sun50i-h5-bananapi-m2-plus.dtb \ sun50i-h5-emlid-neutis-n5-devboard.dtb \ sun50i-h5-libretech-all-h3-cc.dtb \ + sun50i-h5-libretech-all-h3-it.dtb \ + sun50i-h5-libretech-all-h5-cc.dtb \ sun50i-h5-nanopi-neo2.dtb \ sun50i-h5-nanopi-neo-plus2.dtb \ sun50i-h5-orangepi-zero-plus.dtb \ diff --git a/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts new file mode 100644 index 0000000000..2e2b14c0ae --- /dev/null +++ b/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Chen-Yu Tsai + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include + +/ { + model = "Banana Pi BPI-M2-Plus v1.2 H5"; + compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts index 493947c9b1..076a0b9831 100644 --- a/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -1,43 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (C) 2018 Aleksandr Aleksandrov + /* - * Copyright (C) 2018 Aleksandr Aleksandrov - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * DTS for Emlid Neutis N5 Dev board. */ /dts-v1/; @@ -46,17 +11,9 @@ / { model = "Emlid Neutis N5 Developer board"; - compatible = "emlid,emlid-neutis-n5-devboard", - "emlid,emlid-neutis-n5", - "allwinner,sun50i-h5"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; + compatible = "emlid,neutis-n5-devboard", + "emlid,neutis-n5", + "allwinner,sun50i-h5"; connector { compatible = "hdmi-connector"; @@ -69,19 +26,8 @@ }; }; - reg_usb0_vbus: usb0-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ - status = "okay"; - }; - vdd_cpux: gpio-regulator { compatible = "regulator-gpio"; - pinctrl-names = "default"; regulator-name = "vdd-cpux"; regulator-type = "voltage"; regulator-boot-on; @@ -91,54 +37,15 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; -&codec { - allwinner,audio-routing = - "Line Out", "LINEOUT", - "LINEIN", "Line In", - "MIC1", "Mic", - "MIC2", "Mic", - "Mic", "MBIAS"; - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; +&cpu0 { + cpu-supply = <&vdd_cpux>; }; -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { +&codec { status = "okay"; }; @@ -159,26 +66,6 @@ }; }; -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - usb0_vbus-supply = <®_usb0_vbus>; +&i2c1 { status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi index 8e1e37db27..6db4855843 100644 --- a/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi @@ -1,96 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (C) 2018 Aleksandr Aleksandrov + /* - * Copyright (C) 2018 Aleksandr Aleksandrov - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * DTSI for Emlid Neutis N5 SoM. */ /dts-v1/; #include "sun50i-h5.dtsi" - -#include - -/ { - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ - post-power-on-delay-ms = <200>; - }; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&r_pio>; - interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ - interrupt-names = "host-wake"; - }; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; -}; +#include diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts index a35f77de22..a91806618e 100644 --- a/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts +++ b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts @@ -1,8 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 BayLibre, SAS - * Author: Neil Armstrong - */ +// Copyright (C) 2018 BayLibre, SAS +// Author: Neil Armstrong /dts-v1/; #include "sun50i-h5.dtsi" @@ -12,3 +10,7 @@ model = "Libre Computer Board ALL-H3-CC H5"; compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; }; + +&mmc2 { + mmc-ddr-3_3v; +}; diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h3-it.dts b/arch/arm/dts/sun50i-h5-libretech-all-h3-it.dts new file mode 100644 index 0000000000..f6756d1bb0 --- /dev/null +++ b/arch/arm/dts/sun50i-h5-libretech-all-h3-it.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 Chen-Yu Tsai + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include + +/ { + model = "Libre Computer Board ALL-H3-IT H5"; + compatible = "libretech,all-h3-it-h5", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts new file mode 100644 index 0000000000..df1b9263ad --- /dev/null +++ b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Chen-Yu Tsai + +#include "sun50i-h5-libretech-all-h3-cc.dts" + +/ { + model = "Libre Computer Board ALL-H5-CC H5"; + compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5"; + + aliases { + spi0 = &spi0; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_vcc5v0>; + }; +}; + +&codec { + /* No line out; only onboard microphone */ + allwinner,audio-routing = + "MIC1", "Mic", + "Mic", "MBIAS"; +}; + +/* This board has external PHY */ +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + /delete-property/ allwinner,leds-active-low; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts index 506e25ba02..4f9ba53ffa 100644 --- a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts @@ -1,45 +1,6 @@ -/* - * Copyright (C) 2017 Antony Antony - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Antony Antony +// Copyright (C) 2016 ARM Ltd. /dts-v1/; #include "sun50i-h5.dtsi" @@ -78,7 +39,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -96,7 +56,6 @@ vdd_cpux: gpio-regulator { compatible = "regulator-gpio"; - pinctrl-names = "default"; regulator-name = "vdd-cpux"; regulator-type = "voltage"; regulator-boot-on; @@ -106,13 +65,11 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ post-power-on-delay-ms = <200>; }; @@ -191,7 +148,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts index cc268a6978..b059e20813 100644 --- a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2017 Icenowy Zheng - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Icenowy Zheng /dts-v1/; #include "sun50i-h5.dtsi" @@ -142,7 +103,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts index 3e0d5a9c09..70b5f09984 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. /dts-v1/; #include "sun50i-h5.dtsi" @@ -180,7 +141,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -221,7 +182,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts index b75ca4d7d0..cb44bfa598 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-prime.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts @@ -1,47 +1,7 @@ -/* - * Copyright (C) 2017 Icenowy Zheng - * - * Based on sun50i-h5-orangepi-pc2.dts, which is: - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Icenowy Zheng +// Based on sun50i-h5-orangepi-pc2.dts, which is: +// Copyright (C) 2016 ARM Ltd. /dts-v1/; #include "sun50i-h5.dtsi" @@ -187,7 +147,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -224,7 +184,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts index 1238de25a9..ef5ca64442 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts @@ -1,9 +1,6 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * Copyright (C) 2018 Hauke Mehrtens - * - * SPDX-License-Identifier: (GPL-2.0+ OR X11) - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. +// Copyright (C) 2018 Hauke Mehrtens /dts-v1/; #include "sun50i-h5.dtsi" @@ -127,7 +124,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts index 53c8c11620..c95a685413 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2017 Jagan Teki - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki /dts-v1/; @@ -78,7 +39,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ post-power-on-delay-ms = <200>; }; @@ -134,7 +94,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h5.dtsi b/arch/arm/dts/sun50i-h5.dtsi index 4e4738cab0..3a1c8b2efd 100644 --- a/arch/arm/dts/sun50i-h5.dtsi +++ b/arch/arm/dts/sun50i-h5.dtsi @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. #include @@ -48,34 +9,44 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; }; - cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; }; - cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; }; - cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; }; }; + pmu { + compatible = "arm,cortex-a53-pmu", + "arm,armv8-pmuv3"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -92,6 +63,117 @@ ; }; + + soc { + syscon: system-control@1c00000 { + compatible = "allwinner,sun50i-h5-system-control"; + reg = <0x01c00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c1: sram@18000 { + compatible = "mmio-sram"; + reg = <0x00018000 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00018000 0x1c000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun50i-h5-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x1c000>; + }; + }; + }; + + video-codec@1c0e000 { + compatible = "allwinner,sun50i-h5-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = ; + allwinner,sram = <&ve_sram 1>; + }; + + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-h5-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + + mali: gpu@1e80000 { + compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; + reg = <0x01e80000 0x30000>; + /* + * While the datasheet lists an interrupt for the + * PMU, the actual silicon does not have the PMU + * block. Reads all return zero, and writes are + * ignored. + */ + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun50i-h5-ths"; + reg = <0x01c25000 0x400>; + interrupts = ; + resets = <&ccu RST_BUS_THS>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu_thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + }; }; &ccu { @@ -129,3 +211,11 @@ ; compatible = "allwinner,sun50i-h5-pinctrl"; }; + +&rtc { + compatible = "allwinner,sun50i-h5-rtc"; +}; + +&sid { + compatible = "allwinner,sun50i-h5-sid"; +}; diff --git a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 7d01f93226..d277d04303 100644 --- a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -28,7 +28,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pwr_led { label = "bananapi-m2-zero:red:pwr"; @@ -39,7 +38,6 @@ gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; sw4 { label = "power"; @@ -48,13 +46,34 @@ }; }; + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + + gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ + enable-active-high; + gpios-states = <0x1>; + states = <1100000 0>, <1300000 1>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci0 { status = "okay"; }; @@ -94,14 +113,27 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; + }; &usb_otg { diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts index c652ac3b71..3356f4210d 100644 --- a/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts @@ -68,7 +68,6 @@ }; }; -/* &spi0 { status = "okay"; @@ -76,7 +75,6 @@ compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; }; }; -*/ &ohci1 { /* diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts index 0bc031fe4c..f19ed981da 100644 --- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts @@ -89,6 +89,22 @@ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; }; + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + enable-active-high; + gpios-states = <1>; + states = <1100000 0>, <1300000 1>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; @@ -96,6 +112,10 @@ }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci0 { status = "okay"; }; @@ -157,7 +177,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts new file mode 100644 index 0000000000..fc4a8c3d08 --- /dev/null +++ b/arch/arm/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-bananapi-m2-plus-v1.2.dtsi" + +/ { + model = "Banana Pi BPI-M2-Plus v1.2 H3"; + compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3"; +}; diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts b/arch/arm/dts/sun8i-h3-beelink-x2.dts index 25540b7694..45a24441ff 100644 --- a/arch/arm/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts @@ -90,6 +90,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; sound_spdif { @@ -141,8 +143,9 @@ }; &ir { + linux,rc-map-name = "rc-tanix-tx3mini"; pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -155,6 +158,8 @@ &mmc1 { vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; @@ -193,13 +198,13 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts new file mode 100644 index 0000000000..02fbe00cde --- /dev/null +++ b/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * DTS for Emlid Neutis N5 Dev board. + * + * Copyright (C) 2019 Georgii Staroselskii + */ + +/dts-v1/; + +#include "sun8i-h3-emlid-neutis-n5h3.dtsi" + +/ { + model = "Emlid Neutis N5H3 Developer board"; + compatible = "emlid,neutis-n5h3-devboard", + "emlid,neutis-n5h3", + "allwinner,sun8i-h3"; + + vdd_cpux: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0>, <1300000 0x1>; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + +}; + +&cpu0 { + cpu-supply = <&vdd_cpux>; +}; + +&codec { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c1 { + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi new file mode 100644 index 0000000000..3f5c63e582 --- /dev/null +++ b/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * DTSI for Emlid Neutis N5 SoM. + * + * Copyright (C) 2019 Georgii Staroselskii + */ + +/dts-v1/; + +#include "sun8i-h3.dtsi" +#include diff --git a/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts new file mode 100644 index 0000000000..ff0a7a952e --- /dev/null +++ b/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang + * Copyright (C) 2018 Jonathan McDowell + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "MapleBoard MP130"; + compatible = "mapleboard,mp130", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "mp130:orange:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "mp130:orange:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ + }; + + user { + label = "user"; + linux,code = ; + gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "LINEIN", "Line In"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_rx_pin>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts new file mode 100644 index 0000000000..6b149271ef --- /dev/null +++ b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Karl Palsson + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "FriendlyARM NanoPi Duo2"; + compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "nanopi:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status { + label = "nanopi:green:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + + k1 { + label = "k1"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ + }; + }; + + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50>; /* 4ms */ + + enable-active-high; + enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0>, <1300000 1>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vdd_sys: vdd-sys { + compatible = "regulator-fixed"; + regulator-name = "vdd-sys"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; + +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts index 65cba10508..4ba533b034 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts @@ -64,9 +64,23 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci1 { @@ -94,9 +108,19 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/dts/sun8i-h3-nanopi-m1.dts index 9412668bb8..69243dcb30 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-m1.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-m1.dts @@ -93,7 +93,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts index 6246d3eff3..07867a0d56 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts @@ -105,7 +105,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-nanopi.dtsi b/arch/arm/dts/sun8i-h3-nanopi.dtsi index f110ee3822..4df29a6531 100644 --- a/arch/arm/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/dts/sun8i-h3-nanopi.dtsi @@ -59,8 +59,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_npi>, <&leds_r_npi>; status { label = "nanopi:blue:status"; @@ -78,8 +76,6 @@ r_gpio_keys { compatible = "gpio-keys"; input-name = "k1"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_npi>; k1 { label = "k1"; @@ -104,28 +100,9 @@ status = "okay"; }; -&pio { - leds_npi: led_pins { - pins = "PA10"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_npi: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_npi: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index f1fc6bdca8..597c425d08 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -75,8 +75,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; status_led { label = "orangepi:red:status"; @@ -92,8 +90,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw2 { label = "sw2"; @@ -110,8 +106,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_orangepi>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ }; }; @@ -152,7 +146,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -179,30 +173,6 @@ }; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3", "PL4"; - function = "gpio_in"; - }; - - wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin { - pins = "PL7"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -210,7 +180,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/dts/sun8i-h3-orangepi-lite.dts index 476ae8e387..6f9c97add5 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-lite.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -91,8 +89,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -126,7 +122,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -160,28 +156,9 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-one.dts b/arch/arm/dts/sun8i-h3-orangepi-one.dts index 245fd658de..4759ba3f29 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-one.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -90,8 +88,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -113,8 +109,7 @@ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ enable-active-high; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; @@ -166,25 +161,6 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ status = "okay"; @@ -192,7 +168,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts index 4624033412..5aff8ecc66 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -90,8 +88,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -152,7 +148,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -179,13 +175,6 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - &r_i2c { status = "okay"; @@ -210,18 +199,6 @@ }; }; -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ status = "okay"; @@ -229,7 +206,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts index b403e5d787..97f497854e 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -63,8 +63,6 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_pin_a>; regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -74,6 +72,10 @@ }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci3 { status = "okay"; }; @@ -112,10 +114,19 @@ bias-pull-up; }; -&pio { - usb3_vbus_pin_a: usb3_vbus_pin { - pins = "PG11"; - function = "gpio_out"; +&r_i2c { + status = "okay"; + + reg_vdd_cpux: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + silergy,fixed-microvolt = <1200000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <200>; + regulator-boot-on; + regulator-always-on; }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts index f2f7b7a925..b8f46e2802 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -134,6 +134,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-rervision-dvk.dts b/arch/arm/dts/sun8i-h3-rervision-dvk.dts new file mode 100644 index 0000000000..4738f3a9ef --- /dev/null +++ b/arch/arm/dts/sun8i-h3-rervision-dvk.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Bootlin + * Author: Paul Kocialkowski + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "RerVision H3-DVK"; + compatible = "rervision,h3-dvk", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi index f0096074a4..20217e2ca4 100644 --- a/arch/arm/dts/sun8i-h3.dtsi +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -47,19 +47,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000 1040000 1300000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@816000000 { + opp-816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000 1100000 1300000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1008000000 { + opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000 1200000 1300000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -80,7 +80,7 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; @@ -90,7 +90,7 @@ #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; @@ -100,7 +100,7 @@ #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; @@ -111,6 +111,15 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = , @@ -120,9 +129,22 @@ }; soc { - system-control@1c00000 { + deinterlace: deinterlace@1400000 { + compatible = "allwinner,sun8i-h3-deinterlace"; + reg = <0x01400000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + <&ccu CLK_DRAM_DEINTERLACE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = ; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + + syscon: system-control@1c00000 { compatible = "allwinner,sun8i-h3-system-control"; - reg = <0x01c00000 0x30>; + reg = <0x01c00000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -142,6 +164,26 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun8i-h3-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = ; + allwinner,sram = <&ve_sram 1>; + }; + + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-h3-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; @@ -166,6 +208,26 @@ assigned-clocks = <&ccu CLK_GPU>; assigned-clock-rates = <384000000>; }; + + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>; + interrupts = ; + resets = <&ccu RST_BUS_THS>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <0>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; }; }; @@ -216,3 +278,11 @@ &pio { compatible = "allwinner,sun8i-h3-pinctrl"; }; + +&rtc { + compatible = "allwinner,sun8i-h3-rtc"; +}; + +&sid { + compatible = "allwinner,sun8i-h3-sid"; +}; diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi new file mode 100644 index 0000000000..22466afd38 --- /dev/null +++ b/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai + */ + +#include "sunxi-bananapi-m2-plus.dtsi" + +/ { + /* + * Bananapi M2+ v1.2 uses a GPIO line to change the effective + * resistance on the CPU regulator's feedback pin. + */ + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ + gpios-states = <0x1>; + states = <1100000 0>, <1300000 1>; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi index 3bed375b9c..39263e74fb 100644 --- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi @@ -69,7 +69,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pwr_led { label = "bananapi-m2-plus:red:pwr"; @@ -80,7 +79,6 @@ gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; sw4 { label = "power"; @@ -101,7 +99,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc 1>; clock-names = "ext_clock"; @@ -153,7 +150,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -210,7 +207,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi new file mode 100644 index 0000000000..fc67e30fe2 --- /dev/null +++ b/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * DTSI for Emlid Neutis SoMs. + * + * Copyright (C) 2019 Georgii Staroselskii + */ + +#include "sunxi-common-regulators.dtsi" + +#include + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ + post-power-on-delay-ms = <200>; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpux>; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + status = "okay"; +}; + + +&de { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ + device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "Mic", + "MIC2", "Mic", + "Mic", "MBIAS"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/dts/sunxi-h3-h5.dtsi b/arch/arm/dts/sunxi-h3-h5.dtsi index fc6131315c..5e9c3060aa 100644 --- a/arch/arm/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/dts/sunxi-h3-h5.dtsi @@ -86,6 +86,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -93,15 +94,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - iosc: internal-osc-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <16000000>; - clock-accuracy = <300000000>; - clock-output-names = "iosc"; + clock-accuracy = <50000>; + clock-output-names = "ext_osc32k"; }; }; @@ -115,15 +109,16 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + dma-ranges; ranges; display_clocks: clock@1000000 { /* compatible is in per SoC .dtsi file */ reg = <0x01000000 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -152,12 +147,6 @@ }; }; - syscon: syscon@1c00000 { - compatible = "allwinner,sun8i-h3-system-controller", - "syscon"; - reg = <0x01c00000 0x1000>; - }; - dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; @@ -239,6 +228,17 @@ #size-cells = <0>; }; + sid: eeprom@1c14000 { + /* compatible is in per SoC .dtsi file */ + reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 4>; + }; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x400>; @@ -249,6 +249,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -375,7 +376,7 @@ ccu: clock@1c20000 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -386,14 +387,21 @@ reg = <0x01c20800 0x400>; interrupts = , ; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; - emac_rgmii_pins: emac0 { + csi_pins: csi-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", + "PE11"; + function = "csi"; + }; + + emac_rgmii_pins: emac-rgmii-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", "PD12", "PD13", "PD15", "PD16", "PD17"; @@ -401,22 +409,22 @@ drive-strength = <40>; }; - i2c0_pins: i2c0 { + i2c0_pins: i2c0-pins { pins = "PA11", "PA12"; function = "i2c0"; }; - i2c1_pins: i2c1 { + i2c1_pins: i2c1-pins { pins = "PA18", "PA19"; function = "i2c1"; }; - i2c2_pins: i2c2 { + i2c2_pins: i2c2-pins { pins = "PE12", "PE13"; function = "i2c2"; }; - mmc0_pins: mmc0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -424,7 +432,7 @@ bias-pull-up; }; - mmc1_pins: mmc1 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -432,7 +440,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -442,54 +450,59 @@ bias-pull-up; }; - spdif_tx_pins_a: spdif { + spdif_tx_pin: spdif-tx-pin { pins = "PA17"; function = "spdif"; }; - spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; - spi1_pins: spi1 { + spi1_pins: spi1-pins { pins = "PA15", "PA16", "PA14", "PA13"; function = "spi1"; }; - uart0_pins_a: uart0 { + uart0_pa_pins: uart0-pa-pins { pins = "PA4", "PA5"; function = "uart0"; }; - uart1_pins: uart1 { + uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; }; - uart1_rts_cts_pins: uart1_rts_cts { + uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; - uart2_pins: uart2 { + uart2_pins: uart2-pins { pins = "PA0", "PA1"; function = "uart2"; }; - uart3_pins: uart3 { + uart2_rts_cts_pins: uart2-rts-cts-pins { + pins = "PA2", "PA3"; + function = "uart2"; + }; + + uart3_pins: uart3-pins { pins = "PA13", "PA14"; function = "uart3"; }; - uart3_rts_cts_pins: uart3_rts_cts { + uart3_rts_cts_pins: uart3-rts-cts-pins { pins = "PA15", "PA16"; function = "uart3"; }; }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = , ; @@ -543,6 +556,14 @@ }; }; + mbus: dram-controller@1c62000 { + compatible = "allwinner,sun8i-h3-mbus"; + reg = <0x01c62000 0x1000>; + clocks = <&ccu CLK_MBUS>; + dma-ranges = <0x00000000 0x40000000 0xc0000000>; + #interconnect-cells = <1>; + }; + spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; @@ -579,6 +600,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; + clocks = <&osc24M>; }; spdif: spdif@1c21000 { @@ -744,6 +766,20 @@ interrupts = ; }; + csi: camera@1cb0000 { + compatible = "allwinner,sun8i-h3-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_pins>; + status = "disabled"; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun8i-h3-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"; @@ -756,7 +792,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; status = "disabled"; ports { @@ -781,7 +817,7 @@ compatible = "allwinner,sun8i-h3-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu 6>; + <&ccu CLK_PLL_VIDEO>; clock-names = "bus", "mod", "pll-0"; resets = <&ccu RST_BUS_HDMI0>; reset-names = "phy"; @@ -789,17 +825,20 @@ }; rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + /* compatible is in per SoC .dtsi file */ + reg = <0x01f00000 0x400>; interrupts = , ; + clock-output-names = "osc32k", "osc32k-out", "iosc"; + clocks = <&osc32k>; + #clock-cells = <1>; }; r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>, - <&ccu 9>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; @@ -811,12 +850,12 @@ }; ir: ir@1f02000 { - compatible = "allwinner,sun5i-a13-ir"; + compatible = "allwinner,sun6i-a31-ir"; clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; resets = <&r_ccu RST_APB0_IR>; interrupts = ; - reg = <0x01f02000 0x40>; + reg = <0x01f02000 0x400>; status = "disabled"; }; @@ -837,19 +876,19 @@ compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; - clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; - ir_pins_a: ir { + r_ir_rx_pin: r-ir-rx-pin { pins = "PL11"; function = "s_cir_rx"; }; - r_i2c_pins: r-i2c { + r_i2c_pins: r-i2c-pins { pins = "PL0", "PL1"; function = "s_i2c"; }; diff --git a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi index 14c8ec16d4..19b3b23cfa 100644 --- a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi @@ -16,6 +16,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -44,8 +55,8 @@ reg_vcc1v2: vcc1v2 { compatible = "regulator-fixed"; regulator-name = "vcc1v2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; vin-supply = <®_vcc5v0>; @@ -95,8 +106,8 @@ reg_vdd_cpux: vdd-cpux { compatible = "regulator-fixed"; regulator-name = "vdd-cpux"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; vin-supply = <®_vcc5v0>; @@ -105,6 +116,26 @@ }; }; +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -124,17 +155,26 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; &mmc0 { vmmc-supply = <®_vcc_io>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; @@ -147,6 +187,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -161,7 +205,12 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi new file mode 100644 index 0000000000..204fba3614 --- /dev/null +++ b/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 Chen-Yu Tsai + +#include +#include + +/ { + aliases { + serial0 = &uart0; + spi0 = &spi0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_led { + label = "librecomputer:blue:status"; + gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + }; + + /* This represents the board's 5V input */ + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + enable-active-high; + }; + + reg_vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc-io"; + /* This is simply a MOSFET switch */ + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc3v3>; + gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ + }; + + reg_vcc_usbwifi: vcc-usbwifi { + compatible = "regulator-fixed"; + regulator-name = "vcc-usbwifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v0>; + gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */ + enable-active-high; + }; + + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu1 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu2 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu3 { + cpu-supply = <®_vdd_cpux>; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc_io>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&pio { + vcc-pa-supply = <®_vcc_io>; + vcc-pc-supply = <®_vcc_io>; + vcc-pd-supply = <®_vcc_io>; + vcc-pe-supply = <®_vcc_io>; + vcc-pf-supply = <®_vcc_io>; + vcc-pg-supply = <®_vcc_io>; +}; + +&r_pio { + vcc-pl-supply = <®_vcc3v3>; +}; + +&spi0 { + status = "okay"; + + spiflash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc_usbwifi>; + status = "okay"; +}; diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h index efb7ba2bd5..30d2d15373 100644 --- a/include/dt-bindings/clock/sun8i-h3-ccu.h +++ b/include/dt-bindings/clock/sun8i-h3-ccu.h @@ -43,6 +43,10 @@ #ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_ #define _DT_BINDINGS_CLK_SUN8I_H3_H_ +#define CLK_PLL_VIDEO 6 + +#define CLK_PLL_PERIPH0 9 + #define CLK_CPUX 14 #define CLK_BUS_CE 20 @@ -91,7 +95,7 @@ #define CLK_BUS_UART1 63 #define CLK_BUS_UART2 64 #define CLK_BUS_UART3 65 -#define CLK_BUS_SCR 66 +#define CLK_BUS_SCR0 66 #define CLK_BUS_EPHY 67 #define CLK_BUS_DBG 68 @@ -139,7 +143,10 @@ #define CLK_AVS 110 #define CLK_HDMI 111 #define CLK_HDMI_DDC 112 - +#define CLK_MBUS 113 #define CLK_GPU 114 +/* New clocks imported in H5 */ +#define CLK_BUS_SCR1 115 + #endif /* _DT_BINDINGS_CLK_SUN8I_H3_H_ */ diff --git a/include/dt-bindings/reset/sun8i-h3-ccu.h b/include/dt-bindings/reset/sun8i-h3-ccu.h index 6b7af80c26..484c2a2291 100644 --- a/include/dt-bindings/reset/sun8i-h3-ccu.h +++ b/include/dt-bindings/reset/sun8i-h3-ccu.h @@ -98,6 +98,9 @@ #define RST_BUS_UART1 50 #define RST_BUS_UART2 51 #define RST_BUS_UART3 52 -#define RST_BUS_SCR 53 +#define RST_BUS_SCR0 53 + +/* New resets imported in H5 */ +#define RST_BUS_SCR1 54 #endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */ -- 2.25.1