From b12d752a63e94e1072f9434edbae8cdc1ad8860e Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 8 Dec 2009 12:46:25 +0000 Subject: [PATCH] ar71xx: preliminary support for the TL-WR1043ND Adds board support for the TP-Link TL-WR1043ND Based on the Atheros AP81 platform. Presently the RTL8366RB switch support is missing due to no driver. The ethernet works with 5 ports@1Gbit but is missing vlan support. Hope Ive done this right, First time submiting a patch. Signed-off-by: Andrew Tarabaras SVN-Revision: 18696 --- target/linux/ar71xx/config-2.6.30 | 1 + target/linux/ar71xx/config-2.6.31 | 1 + .../ar71xx/files/arch/mips/ar71xx/Kconfig | 4 + .../ar71xx/files/arch/mips/ar71xx/Makefile | 1 + .../files/arch/mips/ar71xx/mach-tl-wr1043nd.c | 136 ++++++++++++++++++ .../ar71xx/files/arch/mips/ar71xx/prom.c | 3 + .../mips/include/asm/mach-ar71xx/ar71xx.h | 1 + target/linux/ar71xx/image/Makefile | 5 + target/linux/ar71xx/profiles/tp-link.mk | 11 ++ tools/firmware-utils/src/mktplinkfw.c | 9 ++ 10 files changed, 172 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c diff --git a/target/linux/ar71xx/config-2.6.30 b/target/linux/ar71xx/config-2.6.30 index 3cedfdc460..914c2655a0 100644 --- a/target/linux/ar71xx/config-2.6.30 +++ b/target/linux/ar71xx/config-2.6.30 @@ -14,6 +14,7 @@ CONFIG_AR71XX_MACH_PB42=y CONFIG_AR71XX_MACH_PB44=y CONFIG_AR71XX_MACH_RB_4XX=y CONFIG_AR71XX_MACH_TEW_632BRP=y +CONFIG_AR71XX_MACH_TL_WR1043ND=y CONFIG_AR71XX_MACH_TL_WR741ND=y CONFIG_AR71XX_MACH_TL_WR941ND=y CONFIG_AR71XX_MACH_UBNT=y diff --git a/target/linux/ar71xx/config-2.6.31 b/target/linux/ar71xx/config-2.6.31 index 0615a50f43..fa9f5dd8a1 100644 --- a/target/linux/ar71xx/config-2.6.31 +++ b/target/linux/ar71xx/config-2.6.31 @@ -17,6 +17,7 @@ CONFIG_AR71XX_MACH_RB_4XX=y CONFIG_AR71XX_MACH_TEW_632BRP=y CONFIG_AR71XX_MACH_TL_WR741ND=y CONFIG_AR71XX_MACH_TL_WR941ND=y +CONFIG_AR71XX_MACH_TL_WR1043ND=y CONFIG_AR71XX_MACH_UBNT=y CONFIG_AR71XX_MACH_WNDR3700=y CONFIG_AR71XX_MACH_WNR2000=y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index c68115bf5f..c06038cada 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -71,6 +71,10 @@ config AR71XX_MACH_TL_WR941ND bool "TP-LINK TL-WR941ND support" default y +config AR71XX_MACH_TL_WR1043ND + bool "TP-LINK TL-WR1043ND support" + default y + config AR71XX_MACH_TEW_632BRP bool "TRENDnet TEW-632BRP support" default y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile index 8e37c05906..a7871a22a1 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_AR71XX_MACH_RB_4XX) += mach-rb-4xx.o obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o +obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c new file mode 100644 index 0000000000..e67282e6da --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c @@ -0,0 +1,136 @@ +/* + * TP-LINK TL-WR1043ND board support + * + * Copyright (C) 2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include "devices.h" + +#define TL_WR1043ND_GPIO_LED_SYSTEM 2 +#define TL_WR1043ND_GPIO_LED_QSS 5 + +#define TL_WR1043ND_GPIO_BTN_RESET 3 +#define TL_WR1043ND_GPIO_BTN_QSS 7 + +#define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition tl_wr1043nd_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "kernel", + .offset = 0x020000, + .size = 0x140000, + } , { + .name = "rootfs", + .offset = 0x160000, + .size = 0x690000, + } , { + .name = "art", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "firmware", + .offset = 0x020000, + .size = 0x7d0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data tl_wr1043nd_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = tl_wr1043nd_partitions, + .nr_parts = ARRAY_SIZE(tl_wr1043nd_partitions), +#endif +}; + +static struct spi_board_info tl_wr1043nd_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .platform_data = &tl_wr1043nd_flash_data, + } +}; + +static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { + { + .name = "tl-wr1043nd:green:system", + .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tl-wr1043nd:red:qss", + .gpio = TL_WR1043ND_GPIO_LED_QSS, + .active_low = 1, + } +}; + +static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .threshold = 5, + .gpio = TL_WR1043ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = BTN_1, + .threshold = 5, + .gpio = TL_WR1043ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_wr1043nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + + ar71xx_set_mac_base(mac); + + ar71xx_add_device_mdio(0x0); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = 0x0; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + + ar71xx_add_device_usb(); + + ar71xx_add_device_spi(NULL, tl_wr1043nd_spi_info, + ARRAY_SIZE(tl_wr1043nd_spi_info)); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), + tl_wr1043nd_leds_gpio); + + ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr1043nd_gpio_buttons), + tl_wr1043nd_gpio_buttons); + ar91xx_add_device_wmac(); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TP-LINK TL-WR1043ND", tl_wr1043nd_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c index cc0d5aeb00..b0a51cfb57 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c @@ -70,6 +70,9 @@ static struct board_rec boards[] __initdata = { }, { .name = "TL-WR941ND", .mach_type = AR71XX_MACH_TL_WR941ND, + }, { + .name = "TL-WR1043ND", + .mach_type = AR71XX_MACH_TL_WR1043ND, }, { .name = "UBNT-RS", .mach_type = AR71XX_MACH_UBNT_RS, diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h index 7f61c14403..575d1819cf 100644 --- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h +++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h @@ -139,6 +139,7 @@ enum ar71xx_mach_type { AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ + AR71XX_MACH_TL_WR1043ND,/* TP-LINK TL-WR1041ND */ AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */ AR71XX_MACH_UBNT_RS, /* Ubiquiti RouterStation */ diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index da2f8fd506..6a04bf24f8 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -474,6 +474,10 @@ define Image/Build/Profile/TLWR941NDV2 $(call Image/Build/Template/TPLINK/$(1),tl-wr941ndv2,board=TL-WR941ND,TL-WR941NDv2) endef +define Image/Build/Profile/TLWR1043NDV1 + $(call Image/Build/Template/TPLINK/$(1),tl-wr1043ndv1,board=TL-WR1043ND,TL-WR1043NDv1) +endef + define Image/Build/Profile/WNDR3700 $(call Image/Build/Template/WNDR3700/$(1),wndr3700,board=WNDR3700) endef @@ -503,6 +507,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/TLWR841NDV3,$(1)) $(call Image/Build/Profile/TLWR841NDV5,$(1)) $(call Image/Build/Profile/TLWR941NDV2,$(1)) + $(call Image/Build/Profile/TLWR1043NDV1,$(1)) $(call Image/Build/Profile/UBNT,$(1)) $(call Image/Build/Profile/WP543,$(1)) $(call Image/Build/Profile/WNDR3700,$(1)) diff --git a/target/linux/ar71xx/profiles/tp-link.mk b/target/linux/ar71xx/profiles/tp-link.mk index ab5ed54ca5..d62ab8a7c6 100644 --- a/target/linux/ar71xx/profiles/tp-link.mk +++ b/target/linux/ar71xx/profiles/tp-link.mk @@ -47,3 +47,14 @@ define Profile/TLWR941NDV2/Description endef $(eval $(call Profile,TLWR941NDV2)) + +define Profile/TLWR1043NDV1 + NAME:=TP-LINK TL-WR1043ND v1 + PACKAGES:=kmod-ath9k hostapd-mini +endef + +define Profile/TLWR1043NDV1/Description + Package set optimized for the TP-LINK TL-WR1043ND v1. +endef + +$(eval $(call Profile,TLWR1043NDV1)) diff --git a/tools/firmware-utils/src/mktplinkfw.c b/tools/firmware-utils/src/mktplinkfw.c index cb6a59bea3..08f345e7f5 100644 --- a/tools/firmware-utils/src/mktplinkfw.c +++ b/tools/firmware-utils/src/mktplinkfw.c @@ -37,6 +37,7 @@ #define HWID_TL_WR841ND_V3 0x08410003 #define HWID_TL_WR841ND_V5 0x08410005 #define HWID_TL_WR941ND_V2 0x09410002 +#define HWID_TL_WR1043ND_V1 0x10430001 #define MD5SUM_LEN 16 @@ -136,6 +137,14 @@ static struct board_info boards[] = { .kernel_la = 0x80060000, .kernel_ep = 0x80060000, .rootfs_ofs = 0x140000, + }, { + .id = "TL-WR1043NDv1", + .hw_id = HWID_TL_WR1043ND_V1, + .hw_rev = 1, + .fw_max_len = 0x7c0000, + .kernel_la = 0x80060000, + .kernel_ep = 0x80060000, + .rootfs_ofs = 0x140000, }, { /* terminating entry */ } -- 2.25.1