From b055e67f96d69dc0d273588cafa1cab95d1cabea Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 6 Nov 2019 16:21:15 +0200 Subject: [PATCH] phy: ti-pipe3: Use TRM recommended settings for SATA DPLL The AM572x Technical Reference Manual, SPRUHZ6H, Revised November 2016 [1], shows recommended settings for the SATA DPLL in Table 26-8. DPLL CLKDCOLDO Recommended Settings. Use those settings in the driver. The TRM does not show a value for 20MHz SYS_CLK so we use something close to the 26MHz setting. [1] - http://www.ti.com/lit/ug/spruhz6h/spruhz6h.pdf Signed-off-by: Roger Quadros --- drivers/phy/ti-pipe3-phy.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/phy/ti-pipe3-phy.c b/drivers/phy/ti-pipe3-phy.c index e7e78e3c56..f3b071399c 100644 --- a/drivers/phy/ti-pipe3-phy.c +++ b/drivers/phy/ti-pipe3-phy.c @@ -346,13 +346,13 @@ static int pipe3_phy_probe(struct udevice *dev) } static struct pipe3_dpll_map dpll_map_sata[] = { - {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ - {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ - {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ - {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ - {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ - {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ - { }, /* Terminator */ + {12000000, {625, 4, 4, 6, 0} }, /* 12 MHz */ + {16800000, {625, 6, 4, 7, 0} }, /* 16.8 MHz */ + {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ + {20000000, {750, 9, 4, 6, 0} }, /* 20 MHz */ + {26000000, {750, 12, 4, 6, 0} }, /* 26 MHz */ + {38400000, {625, 15, 4, 6, 0} }, /* 38.4 MHz */ + { }, /* Terminator */ }; static struct pipe3_dpll_map dpll_map_usb[] = { -- 2.25.1