From acc2372db020b9415142e93a1c30f57c1d3aa5c2 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 15 Dec 2014 23:26:14 +0900 Subject: [PATCH] mpc8xx: remove lwmon board support This board is still a non-generic board. Signed-off-by: Masahiro Yamada Cc: Wolfgang Denk --- arch/powerpc/cpu/mpc8xx/Kconfig | 4 - arch/powerpc/cpu/mpc8xx/cpu.c | 46 +- arch/powerpc/cpu/mpc8xx/cpu_init.c | 1 - arch/powerpc/cpu/mpc8xx/i2c.c | 7 - arch/powerpc/cpu/mpc8xx/scc.c | 4 - arch/powerpc/cpu/mpc8xx/serial.c | 16 - arch/powerpc/include/asm/global_data.h | 2 +- board/lwmon/Kconfig | 9 - board/lwmon/MAINTAINERS | 6 - board/lwmon/Makefile | 8 - board/lwmon/README.keybd | 126 --- board/lwmon/flash.c | 632 -------------- board/lwmon/lwmon.c | 1071 ------------------------ board/lwmon/pcmcia.c | 234 ------ board/lwmon/u-boot.lds.debug | 122 --- configs/lwmon_defconfig | 3 - doc/README.scrapyard | 1 + drivers/pcmcia/mpc8xx_pcmcia.c | 6 - drivers/video/mpc8xx_lcd.c | 11 - examples/standalone/test_burst.c | 19 - include/common.h | 4 - include/commproc.h | 26 - include/configs/lwmon.h | 587 ------------- include/pcmcia.h | 2 - 24 files changed, 3 insertions(+), 2944 deletions(-) delete mode 100644 board/lwmon/Kconfig delete mode 100644 board/lwmon/MAINTAINERS delete mode 100644 board/lwmon/Makefile delete mode 100644 board/lwmon/README.keybd delete mode 100644 board/lwmon/flash.c delete mode 100644 board/lwmon/lwmon.c delete mode 100644 board/lwmon/pcmcia.c delete mode 100644 board/lwmon/u-boot.lds.debug delete mode 100644 configs/lwmon_defconfig delete mode 100644 include/configs/lwmon.h diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index b510e1f502..4d47d05d2d 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -22,9 +22,6 @@ config TARGET_IVML24 config TARGET_IVMS8 bool "Support IVMS8" -config TARGET_LWMON - bool "Support lwmon" - config TARGET_TQM823L bool "Support TQM823L" @@ -67,7 +64,6 @@ source "board/cogent/Kconfig" source "board/esteem192e/Kconfig" source "board/ip860/Kconfig" source "board/ivm/Kconfig" -source "board/lwmon/Kconfig" source "board/tqc/tqm8xx/Kconfig" endmenu diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c index 99676643b7..105be9ccc7 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu.c +++ b/arch/powerpc/cpu/mpc8xx/cpu.c @@ -457,8 +457,6 @@ void upmconfig (uint upm, uint * table, uint size) /* ------------------------------------------------------------------------- */ -#ifndef CONFIG_LWMON - int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong msr, addr; @@ -493,32 +491,6 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } -#else /* CONFIG_LWMON */ - -/* - * On the LWMON board, the MCLR reset input of the PIC's on the board - * uses a 47K/1n RC combination which has a 47us time constant. The - * low signal on the HRESET pin of the CPU is only 512 clocks = 8 us - * and thus too short to reset the external hardware. So we use the - * watchdog to reset the board. - */ -int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - /* prevent triggering the watchdog */ - disable_interrupts (); - - /* make sure the watchdog is running */ - reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR); - - /* wait for watchdog reset */ - while (1) {}; - - /* NOTREACHED */ - return 1; -} - -#endif /* CONFIG_LWMON */ - /* ------------------------------------------------------------------------- */ /* @@ -580,31 +552,15 @@ void watchdog_reset (void) } #endif /* CONFIG_WATCHDOG */ -#if defined(CONFIG_WATCHDOG) || defined(CONFIG_LWMON) +#if defined(CONFIG_WATCHDOG) void reset_8xx_watchdog (volatile immap_t * immr) { -# if defined(CONFIG_LWMON) - /* - * The LWMON board uses a MAX6301 Watchdog - * with the trigger pin connected to port PA.7 - * - * (The old board version used a MAX706TESA Watchdog, which - * had to be handled exactly the same.) - */ -# define WATCHDOG_BIT 0x0100 - immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */ - immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */ - immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */ - - immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */ -# else /* * All other boards use the MPC8xx Internal Watchdog */ immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */ immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */ -# endif /* CONFIG_LWMON */ } #endif /* CONFIG_WATCHDOG */ diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index 9350fdd74a..d41fa8888b 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -128,7 +128,6 @@ void cpu_init_f (volatile immap_t * immr) #if defined(CONFIG_IP860) || \ defined(CONFIG_IVML24) || \ defined(CONFIG_IVMS8) || \ - defined(CONFIG_LWMON) || \ defined(CONFIG_RMU) memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM; diff --git a/arch/powerpc/cpu/mpc8xx/i2c.c b/arch/powerpc/cpu/mpc8xx/i2c.c index 2f8b1393f2..6146de3875 100644 --- a/arch/powerpc/cpu/mpc8xx/i2c.c +++ b/arch/powerpc/cpu/mpc8xx/i2c.c @@ -17,9 +17,6 @@ #include #include -#ifdef CONFIG_LWMON -#include -#endif DECLARE_GLOBAL_DATA_PTR; @@ -591,10 +588,6 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) uchar xaddr[4]; int rc; -#ifdef CONFIG_LWMON - WATCHDOG_RESET(); -#endif - xaddr[0] = (addr >> 24) & 0xFF; xaddr[1] = (addr >> 16) & 0xFF; xaddr[2] = (addr >> 8) & 0xFF; diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c index 610fd788bb..251966b4a0 100644 --- a/arch/powerpc/cpu/mpc8xx/scc.c +++ b/arch/powerpc/cpu/mpc8xx/scc.c @@ -193,10 +193,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; -#if defined(CONFIG_LWMON) - reset_phy(); -#endif - pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[PROFF_ENET]); rxIdx = 0; diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c index b1625fba16..bb16b17937 100644 --- a/arch/powerpc/cpu/mpc8xx/serial.c +++ b/arch/powerpc/cpu/mpc8xx/serial.c @@ -405,22 +405,6 @@ static int scc_init (void) sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]); up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC]; -#if defined(CONFIG_LWMON) && defined(CONFIG_8xx_CONS_SCC2) - { /* Disable Ethernet, enable Serial */ - uchar c; - - c = pic_read (0x61); - c &= ~0x40; /* enable COM3 */ - c |= 0x80; /* disable Ethernet */ - pic_write (0x61, c); - - /* enable RTS2 */ - cp->cp_pbpar |= 0x2000; - cp->cp_pbdat |= 0x2000; - cp->cp_pbdir |= 0x2000; - } -#endif /* CONFIG_LWMON */ - /* Disable transmitter/receiver. */ sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 8e59e8ba74..4430477f9a 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -109,7 +109,7 @@ struct arch_global_data { #if defined(CONFIG_WD_MAX_RATE) unsigned long long wdt_last; /* trace watch-dog triggering rate */ #endif -#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5) +#if defined(CONFIG_LWMON5) unsigned long kbd_status; #endif }; diff --git a/board/lwmon/Kconfig b/board/lwmon/Kconfig deleted file mode 100644 index e98c794767..0000000000 --- a/board/lwmon/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_LWMON - -config SYS_BOARD - default "lwmon" - -config SYS_CONFIG_NAME - default "lwmon" - -endif diff --git a/board/lwmon/MAINTAINERS b/board/lwmon/MAINTAINERS deleted file mode 100644 index 763ce229f2..0000000000 --- a/board/lwmon/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -LWMON BOARD -M: Wolfgang Denk -S: Maintained -F: board/lwmon/ -F: include/configs/lwmon.h -F: configs/lwmon_defconfig diff --git a/board/lwmon/Makefile b/board/lwmon/Makefile deleted file mode 100644 index 599a61378e..0000000000 --- a/board/lwmon/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = lwmon.o flash.o pcmcia.o diff --git a/board/lwmon/README.keybd b/board/lwmon/README.keybd deleted file mode 100644 index 5e5144e569..0000000000 --- a/board/lwmon/README.keybd +++ /dev/null @@ -1,126 +0,0 @@ - -Tastaturabfrage: - -Die Implementierung / Decodierung beruht auf den Angaben aus dem Do- -kument "PIC LWE-Tastatur" in der Fassung vom 9. 3. 2001, insbesonde- -re Tabelle 3 im Kapitel 4.3 Tastencodes. In U-Boot werden die vom -Keyboard-Controller gelesenen Daten hexadezimal codiert in der auto- -matisch angelegten Environment-Variablen "keybd" übergeben. Ist kei- -ne Taste gedrückt worden, steht dort: - - keybd=000000000000000000 - -Der decodierte Tastencode ("keybd") kann mit den "bootargs" an den -Linux-Kernel übergeben und dort z. B. in einem Device-Treiber oder -einer Applikation ausgewertet werden. - - -Sonderfunktionen beim Booten: - -Es lassen sich eine oder mehrere (beliebig viele) Tasten oder Tasten- -kombinationen definieren, die Sonderfunktionen auslösen, wenn diese -Tasten beim Booten (Reset) gedrückt sind. - -Wird eine eingestellte Taste bzw. Tastenkombination erkannt, so wird -in U-Boot noch vor dem Start des "Countdown" und somit vor jedem an- -deren Kommando der Inhalt einer dieser Taste bzw. Tastenkombination -zugeordneten Environment-Variablen ausführen. - - -Die Environment-Variable "magic_keys" wird als Liste von Zeichen ver- -standen, die als Suffix an den Namen "key_magic" angefügt werden und -so die Namen der Environment-Variablen definieren, mit denen die -Tasten (-kombinationen) festgelegt werden: - -Ist "magic_keys" NICHT definiert, so wird nur die in der Environment- -Variablen "key_magic" codierte Tasten (-kombination) geprüft, und -ggf. der Inhalt der Environment-Variablen "key_cmd" ausgeführt (ge- -nauer: der Inhalt von "key_cmd" wird der Variablen "preboot" zugewie- -sen, die ausgeführt wird, unmittelbar bevor die interaktive Kommando- -interpretation beginnt). - -Enthält "magic_keys" z. B. die Zeichenkette "0123CB*", so werden -nacheinander folgende Aktionen ausgeführt: - - prüfe Tastencode ggf. führe aus Kommando - in Variable in Variable - ----------------------------------- - key_magic0 ==> key_cmd0 - key_magic1 ==> key_cmd1 - key_magic2 ==> key_cmd2 - key_magic3 ==> key_cmd3 - key_magicC ==> key_cmdC - key_magicB ==> key_cmdB - key_magicA ==> key_cmdA - key_magic* ==> key_cmd* - -Hinweis: sobald ein aktivierter Tastencode erkannt wurde, wird die -Bearbeitung abgebrochen; es wird daher höchstens eines der definier- -ten Kommandos ausgeführt, wobei die Priorität durch die Suchreihen- -folge festgelegt wird, also durch die Reihenfolge der Zeichen in der -Varuiablen "magic_keys". - - -Die Codierung der Tasten, die beim Booten gedrückt werden müssen, um -eine Funktion auszulösen, erfolgt nach der Tastaturtabelle. - -Die Definitionen - - => setenv key_magic0 3a+3b - => setenv key_cmd0 setenv bootdelay 30 - -bedeuten dementsprechend, daß die Tasten mit den Codes 0x3A (Taste -"F1") und 0x3B (Taste "F2") gleichzeitig gedrückt werden müssen. Sie -können dort eine beliebige Tastenkombination eintragen (jeweils 2 -Zeichen für die Hex-Codes der Tasten, und '+' als Trennzeichen). - -Wird die eingestellte Tastenkombination erkannt, so wird in U-Boot -noch vor dem Start des "Countdown" und somit vor jedem anderen Kom- -mando das angebene Kommando ausgeführt und somit ein langes Boot- -Delay eingetragen. - -Praktisch könnten Sie also in U-Boot "bootdelay" auf 0 setzen und -somit stets ohne jede User-Interaktion automatisch booten, außer, -wenn die beiden Tasten "F1" und "F2" beim Booten gedrückt werden: -dann würde ein Boot-Delay von 30 Sekunden eingefügt. - - -Hinweis: dem Zeichen '#' kommt innerhalb von "magic_keys" eine beson- -dere Bedeutung zu: die dadurch definierte Key-Sequenz schaltet den -Monitor in den "Debug-Modus" - das bedeutet zunächst, daß alle weite- -ren Meldungen von U-Boot über das LCD-Display ausgegeben werden; -außerdem kann man durch das mit dieser Tastenkombination verknüpfte -Kommando z. B. die Linux-Bootmeldungen ebenfalls auf das LCD-Display -legen, so daß der Boot-Vorgang direkt und ohne weitere Hilfsmittel -analysiert werden kann. - -Beispiel: - -In U-Boot werden folgende Environment-Variablen gesetzt und abgespei- -chert: - -(1) => setenv magic_keys 01234#X -(2) => setenv key_cmd# setenv addfb setenv bootargs \\${bootargs} console=tty0 console=ttyS1,\\${baudrate} -(3) => setenv nfsargs setenv bootargs root=/dev/nfs rw nfsroot=\${serverip}:\${rootpath} -(4) => setenv addip setenv bootargs \${bootargs} ip=\${ipaddr}:\${serverip}:\${gatewayip}:\${netmask}:\${hostname}::off panic=1 -(5) => setenv addfb setenv bootargs \${bootargs} console=ttyS1,\${baudrate} -(6) => setenv bootcmd bootp\;run nfsargs\;run addip\;run addfb\;bootm - -Hierbei wird die Linux Commandline (in der Variablen "bootargs") im -Boot-Kommando "bootcmd" (6) schrittweise zusammengesetzt: zunächst -werden die für Root-Filesystem über NFS erforderlichen Optionen ge- -setzt ("run nfsargs", vgl. (3)), dann die Netzwerkkonfiguration an- -gefügt ("run addip", vgl. (4)), und schließlich die Systemconsole -definiert ("run addfb"). - -Dabei wird im Normalfall die Definition (5) verwendt; wurde aller- -dings beim Reset die entsprechende Taste gedrückt gehalten, so wird -diese Definition bei der Ausführung des in (2) definierten Kommandos -überschrieben, so daß Linux die Bootmeldungen auch über das Frame- -buffer-Device (=LCD-Display) ausgibt. - -Beachten Sie die Verdoppelung der '\'-Escapes in der Definition von -"key_cmd#" - diese ist erforderlich, weil der String _zweimal_ inter- -pretiert wird: das erste Mal bei der Eingabe von "key_cmd#", das -zweite Mal, wenn der String (als Inhalt von "preboot") ausgeführt -wird. diff --git a/board/lwmon/flash.c b/board/lwmon/flash.c deleted file mode 100644 index cb60c418a1..0000000000 --- a/board/lwmon/flash.c +++ /dev/null @@ -1,632 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* #define DEBUG */ - -#include -#include - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/*---------------------------------------------------------------------*/ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_data (flash_info_t *info, ulong dest, ulong data); -#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE -static int write_data_buf (flash_info_t * info, ulong dest, uchar * cp, int len); -#endif -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - int i; - - /* Init: no FLASHes known */ - for (i=0; i size_b0) { - printf ("## ERROR: " - "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20, - size_b0, size_b0<<20 - ); - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } - - debug ("## Before remap: " - "BR0: 0x%08x OR0: 0x%08x " - "BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0, - memctl->memc_br1, memctl->memc_or1); - - /* Remap FLASH according to real size */ - memctl->memc_or0 = (-size_b0 & 0xFFFF8000) | CONFIG_SYS_OR_TIMING_FLASH | - OR_CSNT_SAM | OR_ACS_DIV1; - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_V; - - debug ("## BR0: 0x%08x OR0: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0); - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size_b0; - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif - - if (size_b1) { - memctl->memc_or1 = (-size_b1 & 0xFFFF8000) | CONFIG_SYS_OR_TIMING_FLASH | - OR_CSNT_SAM | OR_ACS_DIV1; - memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) | - BR_PS_32 | BR_V; - - debug ("## BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br1, memctl->memc_or1); - - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0), - &flash_info[1]); - - flash_info[1].size = size_b1; - - flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[1]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[1]); -#endif - } else { - memctl->memc_br1 = 0; /* invalidate bank */ - memctl->memc_or1 = 0; /* invalidate bank */ - - debug ("## DISABLE BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br1, memctl->memc_or1); - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - flash_info[1].size = 0; - } - - debug ("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); - - return (size_b0 + size_b1); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base; - base += 0x00020000 * 2; /* 128k * 2 chips per bank */ - } - return; - - default: - printf ("Don't know sector ofsets for flash type 0x%lx\n", - info->flash_id); - return; - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("Fujitsu "); break; - case FLASH_MAN_SST: printf ("SST "); break; - case FLASH_MAN_STM: printf ("STM "); break; - case FLASH_MAN_INTEL: printf ("Intel "); break; - case FLASH_MAN_MT: printf ("MT "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F320J3A: printf ("28F320J3A (32Mbit = 128K x 32)\n"); - break; - case FLASH_28F640J3A: printf ("28F640J3A (64Mbit = 128K x 64)\n"); - break; - case FLASH_28F128J3A: printf ("28F128J3A (128Mbit = 128K x 128)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - if (info->size >= (1 << 20)) { - i = 20; - } else { - i = 10; - } - printf (" Size: %ld %cB in %d Sectors\n", - info->size >> i, - (i == 20) ? 'M' : 'k', - info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - ulong value; - - /* Read Manufacturer ID */ - addr[0] = 0x00900090; - value = addr[0]; - - debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value); - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - case INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value); - - switch (value) { - case INTEL_ID_28F320J3A: - info->flash_id += FLASH_28F320J3A; - info->sector_count = 32; - info->size = 0x00400000 * 2; - break; /* => 8 MB */ - - case INTEL_ID_28F640J3A: - info->flash_id += FLASH_28F640J3A; - info->sector_count = 64; - info->size = 0x00800000 * 2; - break; /* => 16 MB */ - - case INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x01000000 * 2; - break; /* => 32 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - addr[0] = 0x00FF00FF; /* restore read mode */ - return (0); /* => no or unknown flash */ - - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong start, now, last; - - debug ("flash_erase: first: %d last: %d\n", s_first, s_last); - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) { - printf ("Can erase only Intel flash types - aborted\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - last = start; - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *)(info->start[sect]); - unsigned long status; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *addr = 0x00600060; /* clear lock bit setup */ - *addr = 0x00D000D0; /* clear lock bit confirm */ - - udelay (1000); - /* This takes awfully long - up to 50 ms and more */ - while (((status = *addr) & 0x00800080) != 0x00800080) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = 0x00FF00FF; /* reset to read mode */ - return 1; - } - - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - udelay (1000); /* to trigger the watchdog */ - } - - *addr = 0x00500050; /* clear status register */ - *addr = 0x00200020; /* erase setup */ - *addr = 0x00D000D0; /* erase confirm */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - while (((status = *addr) & 0x00800080) != 0x00800080) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = 0x00B000B0; /* suspend erase */ - *addr = 0x00FF00FF; /* reset to read mode */ - return 1; - } - - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - udelay (1000); /* to trigger the watchdog */ - } - - *addr = 0x00FF00FF; /* reset to read mode */ - } - } - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -#define FLASH_WIDTH 4 /* flash bus width in bytes */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } - - wp = (addr & ~(FLASH_WIDTH-1)); /* get lower FLASH_WIDTH aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i= FLASH_WIDTH) { - i = CONFIG_SYS_FLASH_BUFFER_SIZE > cnt ? - (cnt & ~(FLASH_WIDTH - 1)) : CONFIG_SYS_FLASH_BUFFER_SIZE; - if((rc = write_data_buf(info, wp, src,i)) != 0) - return rc; - wp += i; - src += i; - cnt -=i; - } -#else - while (cnt >= FLASH_WIDTH) { - data = 0; - for (i=0; i0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i tout) { - printf("Flash %s timeout at address %p\n", prompt, addr); - *addr = 0x00FF00FF; /* restore read mode */ - return (1); - } - } - return 0; -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)dest; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *addr = 0x00400040; /* write setup */ - *addr = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - if (flash_status_check(addr, CONFIG_SYS_FLASH_WRITE_TOUT, "write") != 0) { - return (1); - } - - *addr = 0x00FF00FF; /* restore read mode */ - - return (0); -} - -#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE -/*----------------------------------------------------------------------- - * Write a buffer to Flash, returns: - * 0 - OK - * 1 - write timeout - */ -static int write_data_buf(flash_info_t * info, ulong dest, uchar * cp, int len) -{ - vu_long *addr = (vu_long *)dest; - int sector; - int cnt; - int retcode; - vu_long * src = (vu_long *)cp; - vu_long * dst = (vu_long *)dest; - - /* find sector */ - for(sector = info->sector_count - 1; sector >= 0; sector--) { - if(dest >= info->start[sector]) - break; - } - - *addr = 0x00500050; /* clear status */ - *addr = 0x00e800e8; /* write buffer */ - - if((retcode = flash_status_check(addr, CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT, - "write to buffer")) == 0) { - cnt = len / FLASH_WIDTH; - *addr = (cnt-1) | ((cnt-1) << 16); - while(cnt-- > 0) { - *dst++ = *src++; - } - *addr = 0x00d000d0; /* write buffer confirm */ - retcode = flash_status_check(addr, CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT, - "buffer write"); - } - *addr = 0x00FF00FF; /* restore read mode */ - *addr = 0x00500050; /* clear status */ - return retcode; -} -#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */ - -/*----------------------------------------------------------------------- - */ diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c deleted file mode 100644 index 225b1ef258..0000000000 --- a/board/lwmon/lwmon.c +++ /dev/null @@ -1,1071 +0,0 @@ -/*********************************************************************** - * -M* Modul: lwmon.c -M* -M* Content: LWMON specific U-Boot commands. - * - * (C) Copyright 2001, 2002 - * DENX Software Engineering - * Wolfgang Denk, wd@denx.de - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - ***********************************************************************/ - -/*---------------------------- Headerfiles ----------------------------*/ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include /* for strdup */ - -DECLARE_GLOBAL_DATA_PTR; - -/*------------------------ Local prototypes ---------------------------*/ -static long int dram_size (long int, long int *, long int); -static void kbd_init (void); -static int compare_magic (uchar *kbd_data, uchar *str); - - -/*--------------------- Local macros and constants --------------------*/ -#define _NOT_USED_ 0xFFFFFFFF - -#ifdef CONFIG_MODEM_SUPPORT -static int key_pressed(void); -extern void disable_putc(void); -#endif /* CONFIG_MODEM_SUPPORT */ - -/* - * 66 MHz SDRAM access using UPM A - */ -const uint sdram_table[] = -{ -#if defined(CONFIG_SYS_MEMORY_75) || defined(CONFIG_SYS_MEMORY_8E) - /* - * Single Read. (Offset 0 in UPM RAM) - */ - 0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00, - 0x1FF5FC47, /* last */ - /* - * SDRAM Initialization (offset 5 in UPM RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */ - /* - * Burst Read. (Offset 8 in UPM RAM) - */ - 0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00, - 0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPM RAM) - */ - 0x1F2DFC04, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPM RAM) - */ - 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00, - 0xF0AFFC00, 0xE1BAFC04, 0x01FF5FC47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPM RAM) - */ - 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC84, 0xFFFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPM RAM) - */ - 0x7FFFFC07, /* last */ - 0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF, -#endif -#ifdef CONFIG_SYS_MEMORY_7E - /* - * Single Read. (Offset 0 in UPM RAM) - */ - 0x0E2DBC04, 0x11AF7C04, 0xEFBAFC00, 0x1FF5FC47, /* last */ - _NOT_USED_, - /* - * SDRAM Initialization (offset 5 in UPM RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */ - /* - * Burst Read. (Offset 8 in UPM RAM) - */ - 0x0E2DBC04, 0x10AF7C04, 0xF0AFFC00, 0xF0AFFC00, - 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPM RAM) - */ - 0x0E29BC04, 0x01B27C04, 0x1FF5FC47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPM RAM) - */ - 0x0E29BC04, 0x10A77C00, 0xF0AFFC00, 0xF0AFFC00, - 0xE1BAFC04, 0x1FF5FC47, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPM RAM) - */ - 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC84, 0xFFFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPM RAM) - */ - 0x7FFFFC07, /* last */ - 0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF, -#endif -}; - -/* - * Check Board Identity: - * - */ - -/*********************************************************************** -F* Function: int checkboard (void) P*A*Z* - * -P* Parameters: none -P* -P* Returnvalue: int - 0 is always returned - * -Z* Intention: This function is the checkboard() method implementation -Z* for the lwmon board. Only a standard message is printed. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -int checkboard (void) -{ - puts ("Board: LICCON Konsole LCD3\n"); - return (0); -} - -/*********************************************************************** -F* Function: phys_size_t initdram (int board_type) P*A*Z* - * -P* Parameters: int board_type -P* - Usually type of the board - ignored here. -P* -P* Returnvalue: long int -P* - Size of initialized memory - * -Z* Intention: This function is the initdram() method implementation -Z* for the lwmon board. -Z* The memory controller is initialized to access the -Z* DRAM. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -phys_size_t initdram (int board_type) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - long int size_b0; - long int size8, size9; - int i; - - /* - * Configure UPMA for SDRAM - */ - upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - /* burst length=4, burst type=sequential, CAS latency=2 */ - memctl->memc_mar = CONFIG_SYS_MAR; - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - - /* initialize memory address register */ - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */ - - /* mode initialization (offset 5) */ - udelay (200); /* 0x80006105 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05); - - /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */ - udelay (1); /* 0x80006130 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); - udelay (1); /* 0x80006130 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); - - udelay (1); /* 0x80006106 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06); - - memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */ - - udelay (200); - - /* Need at least 10 DRAM accesses to stabilize */ - for (i = 0; i < 10; ++i) { - volatile unsigned long *addr = - (volatile unsigned long *) SDRAM_BASE3_PRELIM; - unsigned long val; - - val = *(addr + i); - *(addr + i) = val; - } - - /* - * Check Bank 0 Memory Size for re-configuration - * - * try 8 column mode - */ - size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); - - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); - - if (size8 < size9) { /* leave configuration at 9 columns */ - size_b0 = size9; - memctl->memc_mamr = CONFIG_SYS_MAMR_9COL | MAMR_PTAE; - udelay (500); - } else { /* back to 8 columns */ - size_b0 = size8; - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE; - udelay (500); - } - - /* - * Final mapping: - */ - - memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | - OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING; - memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - udelay (1000); - - return (size_b0); -} - -/*********************************************************************** -F* Function: static long int dram_size (long int mamr_value, -F* long int *base, -F* long int maxsize) P*A*Z* - * -P* Parameters: long int mamr_value -P* - Value for MAMR for the test -P* long int *base -P* - Base address for the test -P* long int maxsize -P* - Maximum size to test for -P* -P* Returnvalue: long int -P* - Size of probed memory - * -Z* Intention: Check memory range for valid RAM. A simple memory test -Z* determines the actually available RAM size between -Z* addresses `base' and `base + maxsize'. Some (not all) -Z* hardware errors are detected: -Z* - short between address lines -Z* - short between data lines - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} - -/* ------------------------------------------------------------------------- */ - -#ifndef PB_ENET_TENA -# define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ -#endif - -/*********************************************************************** -F* Function: int board_early_init_f (void) P*A*Z* - * -P* Parameters: none -P* -P* Returnvalue: int -P* - 0 is always returned. - * -Z* Intention: This function is the board_early_init_f() method implementation -Z* for the lwmon board. -Z* Disable Ethernet TENA on Port B. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -int board_early_init_f (void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - /* Disable Ethernet TENA on Port B - * Necessary because of pull up in COM3 port. - * - * This is just a preliminary fix, intended to turn off TENA - * as soon as possible to avoid noise on the network. Once - * I2C is running we will make sure the interface is - * correctly initialized. - */ - immr->im_cpm.cp_pbpar &= ~PB_ENET_TENA; - immr->im_cpm.cp_pbodr &= ~PB_ENET_TENA; - immr->im_cpm.cp_pbdat &= ~PB_ENET_TENA; /* set to 0 = disabled */ - immr->im_cpm.cp_pbdir |= PB_ENET_TENA; - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -/*********************************************************************** -F* Function: void reset_phy (void) P*A*Z* - * -P* Parameters: none -P* -P* Returnvalue: none - * -Z* Intention: Reset the PHY. In the lwmon case we do this by the -Z* signaling the PIC I/O expander. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -void reset_phy (void) -{ - uchar c; - -#ifdef DEBUG - printf ("### Switch on Ethernet for SCC2 ###\n"); -#endif - c = pic_read (0x61); -#ifdef DEBUG - printf ("Old PIC read: reg_61 = 0x%02x\n", c); -#endif - c |= 0x40; /* disable COM3 */ - c &= ~0x80; /* enable Ethernet */ - pic_write (0x61, c); -#ifdef DEBUG - c = pic_read (0x61); - printf ("New PIC read: reg_61 = 0x%02x\n", c); -#endif - udelay (1000); -} - - -/*------------------------- Keyboard controller -----------------------*/ -/* command codes */ -#define KEYBD_CMD_READ_KEYS 0x01 -#define KEYBD_CMD_READ_VERSION 0x02 -#define KEYBD_CMD_READ_STATUS 0x03 -#define KEYBD_CMD_RESET_ERRORS 0x10 - -/* status codes */ -#define KEYBD_STATUS_MASK 0x3F -#define KEYBD_STATUS_H_RESET 0x20 -#define KEYBD_STATUS_BROWNOUT 0x10 -#define KEYBD_STATUS_WD_RESET 0x08 -#define KEYBD_STATUS_OVERLOAD 0x04 -#define KEYBD_STATUS_ILLEGAL_WR 0x02 -#define KEYBD_STATUS_ILLEGAL_RD 0x01 - -/* Number of bytes returned from Keyboard Controller */ -#define KEYBD_VERSIONLEN 2 /* version information */ -#define KEYBD_DATALEN 9 /* normal key scan data */ - -/* maximum number of "magic" key codes that can be assigned */ - -static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR; - -static uchar *key_match (uchar *); - -#define KEYBD_SET_DEBUGMODE '#' /* Magic key to enable debug output */ - -/*********************************************************************** -F* Function: int board_postclk_init (void) P*A*Z* - * -P* Parameters: none -P* -P* Returnvalue: int -P* - 0 is always returned. - * -Z* Intention: This function is the board_postclk_init() method implementation -Z* for the lwmon board. - * - ***********************************************************************/ -int board_postclk_init (void) -{ - kbd_init(); - -#ifdef CONFIG_MODEM_SUPPORT - if (key_pressed()) { - disable_putc(); /* modem doesn't understand banner etc */ - gd->do_mdm_init = 1; - } -#endif - - return (0); -} - -struct serial_device * default_serial_console (void) -{ - return gd->do_mdm_init ? &serial_scc_device : &serial_smc_device; -} - -static void kbd_init (void) -{ - uchar kbd_data[KEYBD_DATALEN]; - uchar tmp_data[KEYBD_DATALEN]; - uchar val, errcd; - int i; - - i2c_set_bus_num(0); - - gd->arch.kbd_status = 0; - - /* Forced by PIC. Delays <= 175us loose */ - udelay(1000); - - /* Read initial keyboard error code */ - val = KEYBD_CMD_READ_STATUS; - i2c_write (kbd_addr, 0, 0, &val, 1); - i2c_read (kbd_addr, 0, 0, &errcd, 1); - /* clear unused bits */ - errcd &= KEYBD_STATUS_MASK; - /* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */ - errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT); - if (errcd) { - gd->arch.kbd_status |= errcd << 8; - } - /* Reset error code and verify */ - val = KEYBD_CMD_RESET_ERRORS; - i2c_write (kbd_addr, 0, 0, &val, 1); - udelay(1000); /* delay NEEDED by keyboard PIC !!! */ - - val = KEYBD_CMD_READ_STATUS; - i2c_write (kbd_addr, 0, 0, &val, 1); - i2c_read (kbd_addr, 0, 0, &val, 1); - - val &= KEYBD_STATUS_MASK; /* clear unused bits */ - if (val) { /* permanent error, report it */ - gd->arch.kbd_status |= val; - return; - } - - /* - * Read current keyboard state. - * - * After the error reset it may take some time before the - * keyboard PIC picks up a valid keyboard scan - the total - * scan time is approx. 1.6 ms (information by Martin Rajek, - * 28 Sep 2002). We read a couple of times for the keyboard - * to stabilize, using a big enough delay. - * 10 times should be enough. If the data is still changing, - * we use what we get :-( - */ - - memset (tmp_data, 0xFF, KEYBD_DATALEN); /* impossible value */ - for (i=0; i<10; ++i) { - val = KEYBD_CMD_READ_KEYS; - i2c_write (kbd_addr, 0, 0, &val, 1); - i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); - - if (memcmp(kbd_data, tmp_data, KEYBD_DATALEN) == 0) { - /* consistent state, done */ - break; - } - /* remeber last state, delay, and retry */ - memcpy (tmp_data, kbd_data, KEYBD_DATALEN); - udelay (5000); - } -} - -/*********************************************************************** -F* Function: int misc_init_r (void) P*A*Z* - * -P* Parameters: none -P* -P* Returnvalue: int -P* - 0 is always returned, even in the case of a keyboard -P* error. - * -Z* Intention: This function is the misc_init_r() method implementation -Z* for the lwmon board. -Z* The keyboard controller is initialized and the result -Z* of a read copied to the environment variable "keybd". -Z* If KEYBD_SET_DEBUGMODE is defined, a check is made for -Z* this key, and if found display to the LCD will be enabled. -Z* The keys in "keybd" are checked against the magic -Z* keycommands defined in the environment. -Z* See also key_match(). - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -int misc_init_r (void) -{ - uchar kbd_data[KEYBD_DATALEN]; - char keybd_env[2 * KEYBD_DATALEN + 1]; - uchar kbd_init_status = gd->arch.kbd_status >> 8; - uchar kbd_status = gd->arch.kbd_status; - uchar val; - char *str; - int i; - - if (kbd_init_status) { - printf ("KEYBD: Error %02X\n", kbd_init_status); - } - if (kbd_status) { /* permanent error, report it */ - printf ("*** Keyboard error code %02X ***\n", kbd_status); - sprintf (keybd_env, "%02X", kbd_status); - setenv ("keybd", keybd_env); - return 0; - } - - /* - * Now we know that we have a working keyboard, so disable - * all output to the LCD except when a key press is detected. - */ - - if ((console_assign (stdout, "serial") < 0) || - (console_assign (stderr, "serial") < 0)) { - printf ("Can't assign serial port as output device\n"); - } - - /* Read Version */ - val = KEYBD_CMD_READ_VERSION; - i2c_write (kbd_addr, 0, 0, &val, 1); - i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_VERSIONLEN); - printf ("KEYBD: Version %d.%d\n", kbd_data[0], kbd_data[1]); - - /* Read current keyboard state */ - val = KEYBD_CMD_READ_KEYS; - i2c_write (kbd_addr, 0, 0, &val, 1); - i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); - - for (i = 0; i < KEYBD_DATALEN; ++i) { - sprintf (keybd_env + i + i, "%02X", kbd_data[i]); - } - setenv ("keybd", keybd_env); - - str = strdup ((char *)key_match (kbd_data)); /* decode keys */ -#ifdef KEYBD_SET_DEBUGMODE - if (kbd_data[0] == KEYBD_SET_DEBUGMODE) { /* set debug mode */ - if ((console_assign (stdout, "lcd") < 0) || - (console_assign (stderr, "lcd") < 0)) { - printf ("Can't assign LCD display as output device\n"); - } - } -#endif /* KEYBD_SET_DEBUGMODE */ -#ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */ - setenv ("preboot", str); /* set or delete definition */ -#endif /* CONFIG_PREBOOT */ - if (str != NULL) { - free (str); - } - return (0); -} - -#ifdef CONFIG_PREBOOT - -static uchar kbd_magic_prefix[] = "key_magic"; -static uchar kbd_command_prefix[] = "key_cmd"; - -static int compare_magic (uchar *kbd_data, uchar *str) -{ - uchar compare[KEYBD_DATALEN-1]; - char *nxt; - int i; - - /* Don't include modifier byte */ - memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); - - for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) { - uchar c; - int k; - - c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16); - - if (str == (uchar *)nxt) { /* invalid character */ - break; - } - - /* - * Check if this key matches the input. - * Set matches to zero, so they match only once - * and we can find duplicates or extra keys - */ - for (k = 0; k < sizeof(compare); ++k) { - if (compare[k] == '\0') /* only non-zero entries */ - continue; - if (c == compare[k]) { /* found matching key */ - compare[k] = '\0'; - break; - } - } - if (k == sizeof(compare)) { - return -1; /* unmatched key */ - } - } - - /* - * A full match leaves no keys in the `compare' array, - */ - for (i = 0; i < sizeof(compare); ++i) { - if (compare[i]) - { - return -1; - } - } - - return 0; -} - -/*********************************************************************** -F* Function: static uchar *key_match (uchar *kbd_data) P*A*Z* - * -P* Parameters: uchar *kbd_data -P* - The keys to match against our magic definitions -P* -P* Returnvalue: uchar * -P* - != NULL: Pointer to the corresponding command(s) -P* NULL: No magic is about to happen - * -Z* Intention: Check if pressed key(s) match magic sequence, -Z* and return the command string associated with that key(s). -Z* -Z* If no key press was decoded, NULL is returned. -Z* -Z* Note: the first character of the argument will be -Z* overwritten with the "magic charcter code" of the -Z* decoded key(s), or '\0'. -Z* -Z* Note: the string points to static environment data -Z* and must be saved before you call any function that -Z* modifies the environment. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -static uchar *key_match (uchar *kbd_data) -{ - char magic[sizeof (kbd_magic_prefix) + 1]; - uchar *suffix; - char *kbd_magic_keys; - - /* - * The following string defines the characters that can pe appended - * to "key_magic" to form the names of environment variables that - * hold "magic" key codes, i. e. such key codes that can cause - * pre-boot actions. If the string is empty (""), then only - * "key_magic" is checked (old behaviour); the string "125" causes - * checks for "key_magic1", "key_magic2" and "key_magic5", etc. - */ - if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) - kbd_magic_keys = ""; - - /* loop over all magic keys; - * use '\0' suffix in case of empty string - */ - for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) { - sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); -#if 0 - printf ("### Check magic \"%s\"\n", magic); -#endif - if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) { - char cmd_name[sizeof (kbd_command_prefix) + 1]; - char *cmd; - - sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); - - cmd = getenv (cmd_name); -#if 0 - printf ("### Set PREBOOT to $(%s): \"%s\"\n", - cmd_name, cmd ? cmd : "<>"); -#endif - *kbd_data = *suffix; - return ((uchar *)cmd); - } - } -#if 0 - printf ("### Delete PREBOOT\n"); -#endif - *kbd_data = '\0'; - return (NULL); -} -#endif /* CONFIG_PREBOOT */ - -#ifdef CONFIG_LCD_INFO -#include -#include -#include - -void lcd_show_board_info(void) -{ - char temp[32]; - - lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME); - lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n"); - lcd_printf (" Wolfgang DENK, wd@denx.de\n"); -#ifdef CONFIG_LCD_INFO_BELOW_LOGO - lcd_printf ("MPC823 CPU at %s MHz\n", - strmhz(temp, gd->cpu_clk)); - lcd_printf (" %ld MB RAM, %ld MB Flash\n", - gd->ram_size >> 20, - gd->bd->bi_flashsize >> 20 ); -#else - /* leave one blank line */ - lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n", - strmhz(temp, gd->cpu_clk), - gd->ram_size >> 20, - gd->bd->bi_flashsize >> 20 ); -#endif /* CONFIG_LCD_INFO_BELOW_LOGO */ -} -#endif /* CONFIG_LCD_INFO */ - -/*---------------Board Special Commands: PIC read/write ---------------*/ - -#if defined(CONFIG_CMD_BSP) -/*********************************************************************** -F* Function: int do_pic (cmd_tbl_t *cmdtp, int flag, -F* int argc, char * const argv[]) P*A*Z* - * -P* Parameters: cmd_tbl_t *cmdtp -P* - Pointer to our command table entry -P* int flag -P* - If the CMD_FLAG_REPEAT bit is set, then this call is -P* a repetition -P* int argc -P* - Argument count -P* char * const argv[] -P* - Array of the actual arguments -P* -P* Returnvalue: int -P* - 0 The command was handled successfully -P* 1 An error occurred - * -Z* Intention: Implement the "pic [read|write]" commands. -Z* The read subcommand takes one argument, the register, -Z* whereas the write command takes two, the register and -Z* the new value. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - uchar reg, val; - - switch (argc) { - case 3: /* PIC read reg */ - if (strcmp (argv[1], "read") != 0) - break; - - reg = simple_strtoul (argv[2], NULL, 16); - - printf ("PIC read: reg %02x: %02x\n\n", reg, pic_read (reg)); - - return 0; - case 4: /* PIC write reg val */ - if (strcmp (argv[1], "write") != 0) - break; - - reg = simple_strtoul (argv[2], NULL, 16); - val = simple_strtoul (argv[3], NULL, 16); - - printf ("PIC write: reg %02x val 0x%02x: %02x => ", - reg, val, pic_read (reg)); - pic_write (reg, val); - printf ("%02x\n\n", pic_read (reg)); - return 0; - default: - break; - } - return cmd_usage(cmdtp); -} -U_BOOT_CMD( - pic, 4, 1, do_pic, - "read and write PIC registers", - "read reg - read PIC register `reg'\n" - "pic write reg val - write value `val' to PIC register `reg'" -); - -/*********************************************************************** -F* Function: int do_kbd (cmd_tbl_t *cmdtp, int flag, -F* int argc, char * const argv[]) P*A*Z* - * -P* Parameters: cmd_tbl_t *cmdtp -P* - Pointer to our command table entry -P* int flag -P* - If the CMD_FLAG_REPEAT bit is set, then this call is -P* a repetition -P* int argc -P* - Argument count -P* char * const argv[] -P* - Array of the actual arguments -P* -P* Returnvalue: int -P* - 0 is always returned. - * -Z* Intention: Implement the "kbd" command. -Z* The keyboard status is read. The result is printed on -Z* the console and written into the "keybd" environment -Z* variable. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - uchar kbd_data[KEYBD_DATALEN]; - char keybd_env[2 * KEYBD_DATALEN + 1]; - uchar val; - int i; - -#if 0 /* Done in kbd_init */ - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif - - /* Read keys */ - val = KEYBD_CMD_READ_KEYS; - i2c_write (kbd_addr, 0, 0, &val, 1); - i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); - - puts ("Keys:"); - for (i = 0; i < KEYBD_DATALEN; ++i) { - sprintf (keybd_env + i + i, "%02X", kbd_data[i]); - printf (" %02x", kbd_data[i]); - } - putc ('\n'); - setenv ("keybd", keybd_env); - return 0; -} - -U_BOOT_CMD( - kbd, 1, 1, do_kbd, - "read keyboard status", - "" -); - -/* Read and set LSB switch */ -#define CONFIG_SYS_PC_TXD1_ENA 0x0008 /* PC.12 */ - -/*********************************************************************** -F* Function: int do_lsb (cmd_tbl_t *cmdtp, int flag, -F* int argc, char * const argv[]) P*A*Z* - * -P* Parameters: cmd_tbl_t *cmdtp -P* - Pointer to our command table entry -P* int flag -P* - If the CMD_FLAG_REPEAT bit is set, then this call is -P* a repetition -P* int argc -P* - Argument count -P* char * const argv[] -P* - Array of the actual arguments -P* -P* Returnvalue: int -P* - 0 The command was handled successfully -P* 1 An error occurred - * -Z* Intention: Implement the "lsb [on|off]" commands. -Z* The lsb is switched according to the first parameter by -Z* by signaling the PIC I/O expander. -Z* Called with no arguments, the current setting is -Z* printed. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - uchar val; - immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - switch (argc) { - case 1: /* lsb - print setting */ - val = pic_read (0x60); - printf ("LSB is o%s\n", (val & 0x20) ? "n" : "ff"); - return 0; - case 2: /* lsb on or lsb off - set switch */ - val = pic_read (0x60); - - if (strcmp (argv[1], "on") == 0) { - val |= 0x20; - immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA); - immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_TXD1_ENA; - immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA; - } else if (strcmp (argv[1], "off") == 0) { - val &= ~0x20; - immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA); - immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_TXD1_ENA); - immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA; - } else { - break; - } - pic_write (0x60, val); - return 0; - default: - break; - } - return cmd_usage(cmdtp); -} - -U_BOOT_CMD( - lsb, 2, 1, do_lsb, - "check and set LSB switch", - "on - switch LSB on\n" - "lsb off - switch LSB off\n" - "lsb - print current setting" -); - -#endif - -/*----------------------------- Utilities -----------------------------*/ -/*********************************************************************** -F* Function: uchar pic_read (uchar reg) P*A*Z* - * -P* Parameters: uchar reg -P* - Register to read -P* -P* Returnvalue: uchar -P* - Value read from register - * -Z* Intention: Read a register from the PIC I/O expander. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -uchar pic_read (uchar reg) -{ - return (i2c_reg_read (CONFIG_SYS_I2C_PICIO_ADDR, reg)); -} - -/*********************************************************************** -F* Function: void pic_write (uchar reg, uchar val) P*A*Z* - * -P* Parameters: uchar reg -P* - Register to read -P* uchar val -P* - Value to write -P* -P* Returnvalue: none - * -Z* Intention: Write to a register on the PIC I/O expander. - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -void pic_write (uchar reg, uchar val) -{ - i2c_reg_write (CONFIG_SYS_I2C_PICIO_ADDR, reg, val); -} - -/*---------------------- Board Control Functions ----------------------*/ -/*********************************************************************** -F* Function: void board_poweroff (void) P*A*Z* - * -P* Parameters: none -P* -P* Returnvalue: none - * -Z* Intention: Turn off the battery power and loop endless, so this -Z* should better be the last function you call... - * -D* Design: wd@denx.de -C* Coding: wd@denx.de -V* Verification: dzu@denx.de - ***********************************************************************/ -void board_poweroff (void) -{ - /* Turn battery off */ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13)); - - while (1); -} - -#ifdef CONFIG_MODEM_SUPPORT -static int key_pressed(void) -{ - uchar kbd_data[KEYBD_DATALEN]; - uchar val; - - /* Read keys */ - val = KEYBD_CMD_READ_KEYS; - i2c_write (kbd_addr, 0, 0, &val, 1); - i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); - - return (compare_magic(kbd_data, (uchar *)CONFIG_MODEM_KEY_MAGIC) == 0); -} -#endif /* CONFIG_MODEM_SUPPORT */ - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - uchar kbd_data[KEYBD_DATALEN]; - uchar val; - - /* Read keys */ - val = KEYBD_CMD_READ_KEYS; - i2c_write (kbd_addr, 0, 0, &val, 1); - i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); - - return (compare_magic(kbd_data, (uchar *)CONFIG_POST_KEY_MAGIC) == 0); -} -#endif diff --git a/board/lwmon/pcmcia.c b/board/lwmon/pcmcia.c deleted file mode 100644 index b9894cf011..0000000000 --- a/board/lwmon/pcmcia.c +++ /dev/null @@ -1,234 +0,0 @@ -#include -#include -#include -#include - -#undef CONFIG_PCMCIA - -#if defined(CONFIG_CMD_PCMCIA) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define CONFIG_PCMCIA -#endif - -#ifdef CONFIG_PCMCIA - -#define PCMCIA_BOARD_MSG "LWMON" - -/* #define's for MAX1604 Power Switch */ -#define MAX1604_OP_SUS 0x80 -#define MAX1604_VCCBON 0x40 -#define MAX1604_VCC_35 0x20 -#define MAX1604_VCCBHIZ 0x10 -#define MAX1604_VPPBON 0x08 -#define MAX1604_VPPBPBPGM 0x04 -#define MAX1604_VPPBHIZ 0x02 -/* reserved 0x01 */ - -int pcmcia_hardware_enable(int slot) -{ - volatile pcmconf8xx_t *pcmp; - volatile sysconf8xx_t *sysp; - uint reg, mask; - uchar val; - - - debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); - - /* Switch on PCMCIA port in PIC register 0x60 */ - reg = pic_read (0x60); - debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg); - reg &= ~0x10; - /* reg |= 0x08; Vpp not needed */ - pic_write (0x60, reg); -#ifdef DEBUG - reg = pic_read (0x60); - printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg); -#endif - udelay(10000); - - sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf)); - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - - /* - * Configure SIUMCR to enable PCMCIA port B - * (VFLS[0:1] are not used for debugging, we connect FRZ# instead) - */ - sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */ - - /* clear interrupt state, and disable interrupts */ - pcmp->pcmc_pscr = PCMCIA_MASK(_slot_); - pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_); - - /* - * Disable interrupts, DMA, and PCMCIA buffers - * (isolate the interface) and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - /* - * Make sure there is a card in the slot, then configure the interface. - */ - udelay(10000); - debug ("[%d] %s: PIPR(%p)=0x%x\n", - __LINE__,__FUNCTION__, - &(pcmp->pcmc_pipr),pcmp->pcmc_pipr); - if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) { - printf (" No Card found\n"); - return (1); - } - - /* - * Power On. - */ - mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot); - reg = pcmp->pcmc_pipr; - debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", - reg, - (reg&PCMCIA_VS1(slot))?"n":"ff", - (reg&PCMCIA_VS2(slot))?"n":"ff"); - if ((reg & mask) == mask) { - val = 0; /* VCCB3/5 = 0 ==> use Vx = 5.0 V */ - puts (" 5.0V card found: "); - } else { - val = MAX1604_VCC_35; /* VCCB3/5 = 1 ==> use Vy = 3.3 V */ - puts (" 3.3V card found: "); - } - - /* switch VCC on */ - val |= MAX1604_OP_SUS | MAX1604_VCCBON; - i2c_set_bus_num(0); - i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1); - - udelay(500000); - - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - - udelay(250000); /* some cards need >150 ms to come up :-( */ - - debug ("# hardware_enable done\n"); - - return (0); -} - - -#if defined(CONFIG_CMD_PCMCIA) -int pcmcia_hardware_disable(int slot) -{ - volatile immap_t *immap; - volatile pcmconf8xx_t *pcmp; - u_long reg; - uchar val; - - debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); - - immap = (immap_t *)CONFIG_SYS_IMMR; - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - - /* remove all power, put output in high impedance state */ - val = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ; - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1); - - /* Configure PCMCIA General Control Register */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - - /* Switch off PCMCIA port in PIC register 0x60 */ - reg = pic_read (0x60); - debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg); - reg |= 0x10; - reg &= ~0x08; - pic_write (0x60, reg); -#ifdef DEBUG - reg = pic_read (0x60); - printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg); -#endif - udelay(10000); - - return (0); -} -#endif - - -int pcmcia_voltage_set(int slot, int vcc, int vpp) -{ - volatile pcmconf8xx_t *pcmp; - u_long reg; - uchar val; - - debug ("voltage_set: " - PCMCIA_BOARD_MSG - " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n", - 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10); - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - /* - * Disable PCMCIA buffers (isolate the interface) - * and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - /* - * Turn off all power (switch to high impedance) - */ - debug ("PCMCIA power OFF\n"); - val = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ; - i2c_set_bus_num(0); - i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1); - - val = 0; - switch(vcc) { - case 0: break; - case 33: val = MAX1604_VCC_35; break; - case 50: break; - default: goto done; - } - - /* Checking supported voltages */ - - debug ("PIPR: 0x%x --> %s\n", - pcmp->pcmc_pipr, - (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V"); - - i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1); - if (val) { - debug ("PCMCIA powered at %sV\n", - (val & MAX1604_VCC_35) ? "3.3" : "5.0"); - } else { - debug ("PCMCIA powered down\n"); - } - -done: - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n", - slot+'A'); - return (0); -} - -#endif /* CONFIG_PCMCIA */ diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug deleted file mode 100644 index 75a1337170..0000000000 --- a/board/lwmon/u-boot.lds.debug +++ /dev/null @@ -1,122 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - arch/powerpc/lib/extable.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/configs/lwmon_defconfig b/configs/lwmon_defconfig deleted file mode 100644 index 128ff5face..0000000000 --- a/configs/lwmon_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_LWMON=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 6b391dfdae..1f5ff8fce1 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +lwmon powerpc mpc8xx - - Wolfgang Denk NETVIA powerpc mpc8xx - - Pantelis Antoniou R360MPI powerpc mpc8xx - - Wolfgang Denk RRvision powerpc mpc8xx - - Wolfgang Denk diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c index ea88494180..1b41e39158 100644 --- a/drivers/pcmcia/mpc8xx_pcmcia.c +++ b/drivers/pcmcia/mpc8xx_pcmcia.c @@ -58,15 +58,9 @@ static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] = /* -------------------------------------------------------------------- */ -#if defined(CONFIG_LWMON) -#define CONFIG_SYS_PCMCIA_TIMING ( PCMCIA_SHT(9) \ - | PCMCIA_SST(3) \ - | PCMCIA_SL(12)) -#else #define CONFIG_SYS_PCMCIA_TIMING ( PCMCIA_SHT(2) \ | PCMCIA_SST(4) \ | PCMCIA_SL(9)) -#endif /* -------------------------------------------------------------------- */ diff --git a/drivers/video/mpc8xx_lcd.c b/drivers/video/mpc8xx_lcd.c index 336788f702..50eed89d09 100644 --- a/drivers/video/mpc8xx_lcd.c +++ b/drivers/video/mpc8xx_lcd.c @@ -412,17 +412,6 @@ void lcd_enable (void) /* Enable the LCD panel */ immr->im_siu_conf.sc_sdcr |= (1 << (31 - 25)); /* LAM = 1 */ lcdp->lcd_lccr |= LCCR_PON; - -#if defined(CONFIG_LWMON) - { uchar c = pic_read (0x60); -#if defined(CONFIG_LCD) && defined(CONFIG_LWMON) && (CONFIG_POST & CONFIG_SYS_POST_SYSMON) - /* Enable LCD later in sysmon test, only if temperature is OK */ -#else - c |= 0x07; /* Power on CCFL, Enable CCFL, Chip Enable LCD */ -#endif - pic_write (0x60, c); - } -#endif /* CONFIG_LWMON */ } /************************************************************************/ diff --git a/examples/standalone/test_burst.c b/examples/standalone/test_burst.c index 4a16ffb22d..f2fdbf19dc 100644 --- a/examples/standalone/test_burst.c +++ b/examples/standalone/test_burst.c @@ -31,25 +31,6 @@ */ #define TEST_FLASH_ADDR 0x40100000 -/* Define GPIO ports to signal start of burst transfers and errors */ -#ifdef CONFIG_LWMON -/* Use PD.8 to signal start of burst transfers */ -#define GPIO1_DAT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) -#define GPIO1_BIT 0x0080 -/* Configure PD.8 as general purpose output */ -#define GPIO1_INIT \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar &= ~GPIO1_BIT; \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir |= GPIO1_BIT; -/* Use PD.9 to signal error */ -#define GPIO2_DAT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) -#define GPIO2_BIT 0x0040 -/* Configure PD.9 as general purpose output */ -#define GPIO2_INIT \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar &= ~GPIO2_BIT; \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir |= GPIO2_BIT; -#endif /* CONFIG_LWMON */ - - static void test_prepare (void); static int test_burst_start (unsigned long size, unsigned long pattern); static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached); diff --git a/include/common.h b/include/common.h index 80c348660d..29350e4556 100644 --- a/include/common.h +++ b/include/common.h @@ -415,10 +415,6 @@ int eeprom_probe (unsigned dev_addr, unsigned offset); #endif int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); -#ifdef CONFIG_LWMON -extern uchar pic_read (uchar reg); -extern void pic_write (uchar reg, uchar val); -#endif /* * Set this up regardless of board diff --git a/include/commproc.h b/include/commproc.h index 8de0d15b00..509d6e419a 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -543,32 +543,6 @@ typedef struct scc_enet { #endif /* CONFIG_IVMS8, CONFIG_IVML24 */ -/*** LWMON **********************************************************/ - -#if defined(CONFIG_LWMON) -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC2 use. - */ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0800) /* PA 4 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ - -#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK4) to - * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00003E00) -#endif /* CONFIG_LWMON */ - /*** KM8XX *********************************************************/ /* The KM8XX Service Module uses SCC3 for Ethernet */ diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h deleted file mode 100644 index f204587336..0000000000 --- a/include/configs/lwmon.h +++ /dev/null @@ -1,587 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* External logbuffer support */ -#define CONFIG_LOGBUFFER - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC823 1 /* This is a MPC823E CPU */ -#define CONFIG_LWMON 1 /* ...on a LWMON board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -/* Default Ethernet MAC address */ -#define CONFIG_ETHADDR 00:11:B0:00:00:00 - -/* The default Ethernet MAC address can be overwritten just once */ -#ifdef CONFIG_ETHADDR -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 -#endif - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */ -#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init() */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ - -#define CONFIG_LCD 1 /* use LCD controller ... */ -#define CONFIG_MPC8XX_LCD -#define CONFIG_HLD1045 1 /* ... with a HLD1045 display */ - -#define CONFIG_LCD_LOGO 1 /* print our logo on the LCD */ -#define CONFIG_LCD_INFO 1 /* ... and some board info */ -#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/ - -#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ -#define CONFIG_8xx_CONS_SCC2 1 /* Console is on SCC2 */ - -#define CONFIG_BAUDRATE 115200 /* with watchdog >= 38400 needed */ - -#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -/* pre-boot commands */ -#define CONFIG_PREBOOT "setenv bootdelay 15" - -#undef CONFIG_BOOTARGS - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ - CONFIG_SYS_POST_WATCHDOG | \ - CONFIG_SYS_POST_RTC | \ - CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_CPU | \ - CONFIG_SYS_POST_UART | \ - CONFIG_SYS_POST_ETHER | \ - CONFIG_SYS_POST_I2C | \ - CONFIG_SYS_POST_SPI | \ - CONFIG_SYS_POST_USB | \ - CONFIG_SYS_POST_SPR | \ - CONFIG_SYS_POST_SYSMON) - -/* - * Keyboard commands: - * # = 0x28 = ENTER : enable bootmessages on LCD - * 2 = 0x3A+0x3C = F1 + F3 : enable update mode - * 3 = 0x3C+0x3F = F3 + F6 : enable test mode - */ - -#define CONFIG_BOOTCOMMAND "source 40040000;saveenv" - -/* "gatewayip=10.8.211.250\0" \ */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40280000\0" \ - "netmask=255.255.192.0\0" \ - "serverip=10.8.2.101\0" \ - "ipaddr=10.8.57.0\0" \ - "magic_keys=#23\0" \ - "key_magic#=28\0" \ - "key_cmd#=setenv addfb setenv 'bootargs $bootargs console=tty0'\0" \ - "key_magic2=3A+3C\0" \ - "key_cmd2=echo *** Entering Update Mode ***;" \ - "if fatload ide 0:3 10000 update.scr;" \ - "then source 10000;" \ - "else echo *** UPDATE FAILED ***;" \ - "fi\0" \ - "key_magic3=3C+3F\0" \ - "key_cmd3=echo *** Entering Test Mode ***;" \ - "setenv add_misc 'setenv bootargs $bootargs testmode'\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addfb=setenv bootargs $bootargs console=ttyS1,$baudrate\0" \ - "addip=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ - "panic=1\0" \ - "add_wdt=setenv bootargs $bootargs $wdt_args\0" \ - "add_misc=setenv bootargs $bootargs runmode\0" \ - "flash_nfs=run nfsargs addip add_wdt addfb add_misc;" \ - "bootm $kernel_addr\0" \ - "flash_self=run ramargs addip add_wdt addfb add_misc;" \ - "bootm $kernel_addr $ramdisk_addr\0" \ - "net_nfs=tftp 100000 /tftpboot/uImage.lwmon;" \ - "run nfsargs addip add_wdt addfb;bootm\0" \ - "rootpath=/opt/eldk/ppc_8xx\0" \ - "load=tftp 100000 /tftpboot/u-boot.bin\0" \ - "update=protect off 1:0;era 1:0;cp.b 100000 40000000 $filesize\0" \ - "wdt_args=wdt_8xx=off\0" \ - "verify=no" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#define CONFIG_WATCHDOG 1 /* watchdog enabled */ -#define CONFIG_SYS_WATCHDOG_FREQ (CONFIG_SYS_HZ / 20) - -#undef CONFIG_STATUS_LED /* Status LED disabled */ - -/* enable I2C and select the hardware/software driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */ -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -/* - * Software (bit-bang) I2C driver configuration - */ -#define PB_SCL 0x00000020 /* PB 26 */ -#define PB_SDA 0x00000010 /* PB 27 */ - -#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) -#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) -#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) -#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) -#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ - else immr->im_cpm.cp_pbdat &= ~PB_SDA -#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL -#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ - - -#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BMP -#define CONFIG_CMD_BSP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - -#ifdef CONFIG_POST -#define CONFIG_CMD_DIAG -#endif - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ - -/* - * When the watchdog is enabled, output must be fast enough in Linux. - */ -#ifdef CONFIG_WATCHDOG -#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 57600, 115200 } -#endif - -/*----------------------------------------------------------------------*/ -#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */ -#undef CONFIG_MODEM_SUPPORT_DEBUG - -#define CONFIG_MODEM_KEY_MAGIC "3C+3D" /* press F3 + F4 keys to enable modem */ -#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ -#if 0 -#define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ -#define CONFIG_AUTOBOOT_PROMPT \ - "\nEnter password - autoboot in %d sec...\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ -#endif -/*----------------------------------------------------------------------*/ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) || defined(CONFIG_CMD_IDE) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT 2048 /* Timeout for Flash Buffer Write (in ms) */ -/* Buffer size. - We have two flash devices connected in parallel. - Each device incorporates a Write Buffer of 32 bytes. - */ -#define CONFIG_SYS_FLASH_BUFFER_SIZE (2*32) - -/* Put environment in flash which is much faster to boot than using the EEPROM */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x40040000 /* Address of Environment Sector */ -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment */ -#define CONFIG_ENV_SECT_SIZE 0x40000 /* we have BIG sectors only :-( */ - -/*----------------------------------------------------------------------- - * I2C/EEPROM Configuration - */ - -#define CONFIG_SYS_I2C_AUDIO_ADDR 0x28 /* Audio volume control */ -#define CONFIG_SYS_I2C_SYSMON_ADDR 0x2E /* LM87 System Monitor */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */ -#define CONFIG_SYS_I2C_POWER_A_ADDR 0x52 /* PCMCIA/USB power switch, channel A */ -#define CONFIG_SYS_I2C_POWER_B_ADDR 0x53 /* PCMCIA/USB power switch, channel B */ -#define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ -#define CONFIG_SYS_I2C_PICIO_ADDR 0x57 /* PIC IO Expander */ - -#undef CONFIG_USE_FRAM /* Use FRAM instead of EEPROM */ - -#ifdef CONFIG_USE_FRAM /* use FRAM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x55 /* FRAM FM24CL64 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#else /* use EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 /* EEPROM AT24C164 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */ -#endif /* CONFIG_USE_FRAM */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 - -/* List of I2C addresses to be verified by POST */ -#ifdef CONFIG_USE_FRAM -#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ - CONFIG_SYS_I2C_SYSMON_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_POWER_A_ADDR, \ - CONFIG_SYS_I2C_POWER_B_ADDR, \ - CONFIG_SYS_I2C_KEYBD_ADDR, \ - CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR, \ - } -#else /* Use EEPROM - which show up on 8 consequtive addresses */ -#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ - CONFIG_SYS_I2C_SYSMON_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_POWER_A_ADDR, \ - CONFIG_SYS_I2C_POWER_B_ADDR, \ - CONFIG_SYS_I2C_KEYBD_ADDR, \ - CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR+0, \ - CONFIG_SYS_I2C_EEPROM_ADDR+1, \ - CONFIG_SYS_I2C_EEPROM_ADDR+2, \ - CONFIG_SYS_I2C_EEPROM_ADDR+3, \ - CONFIG_SYS_I2C_EEPROM_ADDR+4, \ - CONFIG_SYS_I2C_EEPROM_ADDR+5, \ - CONFIG_SYS_I2C_EEPROM_ADDR+6, \ - CONFIG_SYS_I2C_EEPROM_ADDR+7, \ - } -#endif /* CONFIG_USE_FRAM */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if 0 && defined(CONFIG_WATCHDOG) /* LWMON uses external MAX706TESA WD */ -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -/* EARB, DBGC and DBPC are initialised by the HCW */ -/* => 0x000000C0 */ -#define CONFIG_SYS_SIUMCR (SIUMCR_GB5E) -/*#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit, set PLL multiplication factor ! - */ -/* 0x00405000 */ -#define CONFIG_SYS_PLPRCR_MF 4 /* (4+1) * 13.2 = 66 MHz Clock */ -#define CONFIG_SYS_PLPRCR \ - ( (CONFIG_SYS_PLPRCR_MF << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \ - /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ - PLPRCR_CSR /*| PLPRCR_LOLRE|PLPRCR_FIOPD*/ \ - ) - -#define CONFIG_8xx_GCLK_FREQ ((CONFIG_SYS_PLPRCR_MF+1)*13200000) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -/* 0x01800000 */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | /*SCCR_TBS|*/ \ - SCCR_RTDIV | SCCR_RTSEL | \ - /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ - SCCR_EBDF00 | SCCR_DFSYNC00 | \ - SCCR_DFBRG00 | SCCR_DFNL000 | \ - SCCR_DFNH000 | SCCR_DFLCD100 | \ - SCCR_DFALCD01) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/* 0x00C3 => 0x0003 */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration Register 19-4 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0x0000 - -/*----------------------------------------------------------------------- - * RMDS - RISC Microcode Development Support Control Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RMDS 0 - -/*----------------------------------------------------------------------- - * - * Interrupt Levels - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_CPM_INTERRUPT 13 /* SIU_LEVEL6 */ - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0x50000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0x54000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0x58000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0x5C000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -#define CONFIG_SUPPORT_VFAT /* enable VFAT support */ - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - second Flash bank optional - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x41000000 /* FLASH bank #1 */ - -/* used to re-map FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0xFF000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFF000000 /* OR addr mask */ - -/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 8, EHTR = 0 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_8_CLK) - -#define CONFIG_SYS_OR0_REMAP ( CONFIG_SYS_REMAP_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ - CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \ - CONFIG_SYS_OR_TIMING_FLASH) -/* 16 bit, bank valid */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V ) - -#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V ) - -/* - * BR3/OR3: SDRAM - * - * Multiplexed addresses, GPL5 output to GPL5_A (don't care) - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF0000000 /* map 256 MB (>SDRAM_MAX_SIZE!) */ -#define SDRAM_TIMING OR_SCY_0_CLK /* SDRAM-Timing */ - -#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB SDRAM */ - -#define CONFIG_SYS_OR3_PRELIM (SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING ) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * BR5/OR5: Touch Panel - * - * AM=0xFFC00 ATM=0 CSNT/SAM=0 ACS/G5LA/G5LS=3 BIH=1 SCY=0 SETA=0 TRLX=0 EHTR=0 - */ -#define TOUCHPNL_BASE 0x20000000 -#define TOUCHPNL_OR_AM 0xFFFF8000 -#define TOUCHPNL_TIMING OR_SCY_0_CLK - -#define CONFIG_SYS_OR5_PRELIM (TOUCHPNL_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ - TOUCHPNL_TIMING ) -#define CONFIG_SYS_BR5_PRELIM ((TOUCHPNL_BASE & BR_BA_MSK) | BR_PS_32 | BR_V ) - -#define CONFIG_SYS_MEMORY_75 -#undef CONFIG_SYS_MEMORY_7E -#undef CONFIG_SYS_MEMORY_8E - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MPTPR 0x200 - -/* - * MAMR settings for SDRAM - */ - -#define CONFIG_SYS_MAMR_8COL 0x80802114 -#define CONFIG_SYS_MAMR_9COL 0x80904114 - -/* - * MAR setting for SDRAM - */ -#define CONFIG_SYS_MAR 0x00000088 - -#endif /* __CONFIG_H */ diff --git a/include/pcmcia.h b/include/pcmcia.h index 7e495bc79a..54ab2ac617 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -25,8 +25,6 @@ # define CONFIG_PCMCIA_SLOT_B /* The TQM8xxL use SLOT_B */ #elif defined(CONFIG_IVMS8) || defined(CONFIG_IVML24) /* The IVM* use SLOT_A */ # define CONFIG_PCMCIA_SLOT_A -#elif defined(CONFIG_LWMON) /* The LWMON use SLOT_B */ -# define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_ATC) /* The ATC use SLOT_A */ # define CONFIG_PCMCIA_SLOT_A #else -- 2.25.1