From aaa4ba930ca3bbc98f33651b175480ba86aa4dd2 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 17 Nov 2017 14:57:12 +0800 Subject: [PATCH] board: atmel: add sama5d2_ptc_ek board Add the SAMA5D2 PTC EK board and remove the SAMA5D2 PTC ENGI board which was a prototype. Signed-off-by: Ludovic Desroches Signed-off-by: Wenyou Yang --- arch/arm/dts/Makefile | 3 + arch/arm/dts/at91-sama5d2_ptc_ek.dts | 215 +++++++++++++ arch/arm/dts/sama5d2.dtsi | 18 ++ arch/arm/mach-at91/Kconfig | 7 +- board/atmel/sama5d2_ptc/MAINTAINERS | 7 - board/atmel/sama5d2_ptc/Makefile | 8 - board/atmel/sama5d2_ptc/sama5d2_ptc.c | 285 ------------------ .../{sama5d2_ptc => sama5d2_ptc_ek}/Kconfig | 6 +- board/atmel/sama5d2_ptc_ek/MAINTAINERS | 8 + board/atmel/sama5d2_ptc_ek/Makefile | 8 + board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c | 130 ++++++++ configs/sama5d2_ptc_ek_mmc_defconfig | 60 ++++ configs/sama5d2_ptc_ek_nandflash_defconfig | 60 ++++ configs/sama5d2_ptc_nandflash_defconfig | 33 -- configs/sama5d2_ptc_spiflash_defconfig | 34 --- include/configs/sama5d2_ptc.h | 114 ------- include/configs/sama5d2_ptc_ek.h | 46 +++ 17 files changed, 554 insertions(+), 488 deletions(-) create mode 100644 arch/arm/dts/at91-sama5d2_ptc_ek.dts delete mode 100644 board/atmel/sama5d2_ptc/MAINTAINERS delete mode 100644 board/atmel/sama5d2_ptc/Makefile delete mode 100644 board/atmel/sama5d2_ptc/sama5d2_ptc.c rename board/atmel/{sama5d2_ptc => sama5d2_ptc_ek}/Kconfig (60%) create mode 100644 board/atmel/sama5d2_ptc_ek/MAINTAINERS create mode 100644 board/atmel/sama5d2_ptc_ek/Makefile create mode 100644 board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c create mode 100644 configs/sama5d2_ptc_ek_mmc_defconfig create mode 100644 configs/sama5d2_ptc_ek_nandflash_defconfig delete mode 100644 configs/sama5d2_ptc_nandflash_defconfig delete mode 100644 configs/sama5d2_ptc_spiflash_defconfig delete mode 100644 include/configs/sama5d2_ptc.h create mode 100644 include/configs/sama5d2_ptc_ek.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0d055e3abb..9db56f2d9d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -427,6 +427,9 @@ dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \ logicpd-torpedo-37xx-devkit.dtb \ logicpd-som-lv-37xx-devkit.dtb +dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \ + at91-sama5d2_ptc_ek.dtb + dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \ at91-sama5d2_xplained.dtb diff --git a/arch/arm/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/dts/at91-sama5d2_ptc_ek.dts new file mode 100644 index 0000000000..ab5ab21895 --- /dev/null +++ b/arch/arm/dts/at91-sama5d2_ptc_ek.dts @@ -0,0 +1,215 @@ +/* + * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board + * + * Copyright (C) 2017 Microchip Technology Inc, + * Ludovic Desroches + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" + +/ { + model = "Atmel SAMA5D2 PTC EK"; + compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5"; + + chosen { + u-boot,dm-pre-reloc; + stdout-path = &uart0; + }; + + ahb { + usb0: gadget@00300000 { + atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00400000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioA PIN_PB12 GPIO_ACTIVE_HIGH + 0 + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; + }; + + usb2: ehci@00500000 { + status = "okay"; + }; + + sdmmc0: sdio-host@a0000000 { + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>; + status = "okay"; + u-boot,dm-pre-reloc; + }; + + sdmmc1: sdio-host@b0000000 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>; + status = "disabled"; /* conflicts with nand and qspi0*/ + u-boot,dm-pre-reloc; + }; + + apb { + macb0: ethernet@f8008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; + phy-mode = "rmii"; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + }; + }; + + uart0: serial@f801c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; + status = "okay"; + u-boot,dm-pre-reloc; + }; + + i2c1: i2c@fc028000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "okay"; + + i2c_eeprom: i2c_eeprom@50 { + compatible = "atmel,24mac402"; + reg = <0x50>; + }; + }; + + pioA: gpio@fc038000 { + pinctrl { + pinctrl_i2c1_default: i2c1_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = ; + bias-disable; + }; + + pinctrl_macb0_rmii: macb0_rmii { + pinmux = , + , + , + , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default { + pinmux = , + , + , + , + , + , + , + , + ; + bias-pull-up; + u-boot,dm-pre-reloc; + }; + + pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default { + pinmux = , + , + , + ; + bias-disable; + u-boot,dm-pre-reloc; + }; + + pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default { + pinmux = , + , + , + , + ; + bias-pull-up; + u-boot,dm-pre-reloc; + }; + + pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default { + pinmux = , + ; + bias-disable; + u-boot,dm-pre-reloc; + }; + + pinctrl_uart0_default: uart0_default { + pinmux = , + ; + bias-disable; + u-boot,dm-pre-reloc; + }; + + pinctrl_usb_default: usb_default { + pinmux = ; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = ; + bias-disable; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi index 7520446dc1..6645a55364 100644 --- a/arch/arm/dts/sama5d2.dtsi +++ b/arch/arm/dts/sama5d2.dtsi @@ -302,6 +302,7 @@ #clock-cells = <0>; reg = <24>; atmel,clk-output-range = <0 83000000>; + u-boot,dm-pre-reloc; }; uart1_clk: uart1_clk@25 { @@ -315,6 +316,7 @@ #clock-cells = <0>; reg = <26>; atmel,clk-output-range = <0 83000000>; + u-boot,dm-pre-reloc; }; uart3_clk: uart3_clk@27 { @@ -635,6 +637,14 @@ status = "disabled"; }; + uart0: serial@f801c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf801c000 0x100>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + uart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; @@ -643,6 +653,14 @@ status = "disabled"; }; + uart2: serial@f8024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8024000 0x100>; + clocks = <&uart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + i2c0: i2c@f8028000 { compatible = "atmel,sama5d2-i2c"; reg = <0xf8028000 0x100>; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 7e85b69679..9ec3ab33d9 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -143,10 +143,9 @@ config TARGET_AT91SAM9X5EK select BOARD_EARLY_INIT_F select BOARD_LATE_INIT -config TARGET_SAMA5D2_PTC - bool "SAMA5D2 PTC board" +config TARGET_SAMA5D2_PTC_EK + bool "SAMA5D2 PTC EK board" select SAMA5D2 - select SUPPORT_SPL select BOARD_EARLY_INIT_F config TARGET_SAMA5D2_XPLAINED @@ -251,7 +250,7 @@ source "board/atmel/at91sam9m10g45ek/Kconfig" source "board/atmel/at91sam9n12ek/Kconfig" source "board/atmel/at91sam9rlek/Kconfig" source "board/atmel/at91sam9x5ek/Kconfig" -source "board/atmel/sama5d2_ptc/Kconfig" +source "board/atmel/sama5d2_ptc_ek/Kconfig" source "board/atmel/sama5d2_xplained/Kconfig" source "board/atmel/sama5d27_som1_ek/Kconfig" source "board/atmel/sama5d3_xplained/Kconfig" diff --git a/board/atmel/sama5d2_ptc/MAINTAINERS b/board/atmel/sama5d2_ptc/MAINTAINERS deleted file mode 100644 index 7ab03d6eaf..0000000000 --- a/board/atmel/sama5d2_ptc/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -SAMA5D2 PTC Engineering BOARD -M: Wenyou Yang -S: Maintained -F: board/atmel/sama5d2_ptc/ -F: include/configs/sama5d2_ptc.h -F: configs/sama5d2_ptc_spiflash_defconfig -F: configs/sama5d2_ptc_nandflash_defconfig diff --git a/board/atmel/sama5d2_ptc/Makefile b/board/atmel/sama5d2_ptc/Makefile deleted file mode 100644 index 1fe0392da0..0000000000 --- a/board/atmel/sama5d2_ptc/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright (C) 2016 Atmel -# Wenyou Yang -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += sama5d2_ptc.o diff --git a/board/atmel/sama5d2_ptc/sama5d2_ptc.c b/board/atmel/sama5d2_ptc/sama5d2_ptc.c deleted file mode 100644 index c441e69ee4..0000000000 --- a/board/atmel/sama5d2_ptc/sama5d2_ptc.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * Copyright (C) 2016 Atmel - * Wenyou.Yang - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs == 0; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 0); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1); -} - -static void board_spi0_hw_init(void) -{ - atmel_pio4_set_a_periph(AT91_PIO_PORTA, 14, 0); - atmel_pio4_set_a_periph(AT91_PIO_PORTA, 15, 0); - atmel_pio4_set_a_periph(AT91_PIO_PORTA, 16, 0); - - atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1); - - at91_periph_clk_enable(ATMEL_ID_SPI0); -} - -static void board_nand_hw_init(void) -{ - struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; - - at91_periph_clk_enable(ATMEL_ID_HSMC); - - writel(AT91_SFR_EBICFG_DRIVE0_HIGH | - AT91_SFR_EBICFG_PULL0_NONE | - AT91_SFR_EBICFG_DRIVE1_HIGH | - AT91_SFR_EBICFG_PULL1_NONE, &sfr->ebicfg); - - /* Configure SMC CS3 for NAND */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1), - &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) | - AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) | - AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3) | - AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(3), - &smc->cs[3].mode); - - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 0, 0); /* D0 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 1, 0); /* D1 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 2, 0); /* D2 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 3, 0); /* D3 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 4, 0); /* D4 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 5, 0); /* D5 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 6, 0); /* D6 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 7, 0); /* D7 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 12, 0); /* RE */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 8, 0); /* WE */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 9, 1); /* NCS */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 21, 1); /* RDY */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 10, 1); /* ALE */ - atmel_pio4_set_f_periph(AT91_PIO_PORTA, 11, 1); /* CLE */ -} - -static void board_usb_hw_init(void) -{ - atmel_pio4_set_pio_output(AT91_PIO_PORTA, 28, 1); -} - -static void board_gmac_hw_init(void) -{ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 14, 0); /* GTXCK */ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 15, 0); /* GTXEN */ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 16, 0); /* GRXDV */ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 17, 0); /* GRXER */ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 18, 0); /* GRX0 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 19, 0); /* GRX1 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 20, 0); /* GTX0 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 21, 0); /* GTX1 */ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 22, 0); /* GMDC */ - atmel_pio4_set_f_periph(AT91_PIO_PORTB, 23, 0); /* GMDIO */ - - at91_periph_clk_enable(ATMEL_ID_GMAC); -} - -static void board_uart0_hw_init(void) -{ - atmel_pio4_set_c_periph(AT91_PIO_PORTB, 26, 1); /* URXD0 */ - atmel_pio4_set_c_periph(AT91_PIO_PORTB, 27, 0); /* UTXD0 */ - - at91_periph_clk_enable(CONFIG_USART_ID); -} - -int board_early_init_f(void) -{ - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_periph_clk_enable(ATMEL_ID_PIOB); - at91_periph_clk_enable(ATMEL_ID_PIOC); - at91_periph_clk_enable(ATMEL_ID_PIOD); - - board_uart0_hw_init(); - - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - -#ifdef CONFIG_ATMEL_SPI - board_spi0_hw_init(); -#endif -#ifdef CONFIG_NAND_ATMEL - board_nand_hw_init(); -#endif -#ifdef CONFIG_MACB - board_gmac_hw_init(); -#endif -#ifdef CONFIG_CMD_USB - board_usb_hw_init(); -#endif -#ifdef CONFIG_USB_GADGET_ATMEL_USBA - at91_udp_hw_init(); -#endif - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; - -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00); - if (rc) - printf("GMAC register failed\n"); -#endif - -#ifdef CONFIG_USB_GADGET_ATMEL_USBA - usba_udc_probe(&pdata); -#ifdef CONFIG_USB_ETH_RNDIS - usb_eth_initialize(bis); -#endif -#endif - - return rc; -} - -/* SPL */ -#ifdef CONFIG_SPL_BUILD -void spl_board_init(void) -{ -#ifdef CONFIG_SPI_BOOT - board_spi0_hw_init(); -#endif - -#ifdef CONFIG_NAND_BOOT - board_nand_hw_init(); -#endif -} - -static void ddrc_conf(struct atmel_mpddrc_config *ddrc) -{ - ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR3_SDRAM); - - ddrc->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | - ATMEL_MPDDRC_CR_NR_ROW_14 | - ATMEL_MPDDRC_CR_CAS_DDR_CAS5 | - ATMEL_MPDDRC_CR_DIC_DS | - ATMEL_MPDDRC_CR_DIS_DLL | - ATMEL_MPDDRC_CR_NB_8BANKS | - ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | - ATMEL_MPDDRC_CR_UNAL_SUPPORTED); - - ddrc->rtr = 0x511; - - ddrc->tpr0 = ((6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET) | - (3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET) | - (4 << ATMEL_MPDDRC_TPR0_TWR_OFFSET) | - (9 << ATMEL_MPDDRC_TPR0_TRC_OFFSET) | - (3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET) | - (4 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET) | - (4 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET) | - (4 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET)); - - ddrc->tpr1 = ((27 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET) | - (29 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET) | - (0 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET) | - (3 << ATMEL_MPDDRC_TPR1_TXP_OFFSET)); - - ddrc->tpr2 = ((0 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET) | - (0 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET) | - (0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET) | - (4 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET) | - (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET)); -} - -void mem_init(void) -{ - struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC; - struct atmel_mpddrc_config ddrc_config; - u32 reg; - - ddrc_conf(&ddrc_config); - - at91_periph_clk_enable(ATMEL_ID_MPDDRC); - at91_system_clk_enable(AT91_PMC_DDR); - - reg = readl(&mpddrc->io_calibr); - reg &= ~ATMEL_MPDDRC_IO_CALIBR_RDIV; - reg |= ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55; - reg &= ~ATMEL_MPDDRC_IO_CALIBR_TZQIO; - reg |= ATMEL_MPDDRC_IO_CALIBR_TZQIO_(100); - writel(reg, &mpddrc->io_calibr); - - writel(ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_TWO_CYCLE, - &mpddrc->rd_data_path); - - ddr3_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddrc_config); - - writel(0x3, &mpddrc->cal_mr4); - writel(64, &mpddrc->tim_cal); -} - -void at91_pmc_init(void) -{ - at91_plla_init(AT91_PMC_PLLAR_29 | - AT91_PMC_PLLXR_PLLCOUNT(0x3f) | - AT91_PMC_PLLXR_MUL(82) | - AT91_PMC_PLLXR_DIV(1)); - - at91_pllicpr_init(0); - - at91_mck_init(AT91_PMC_MCKR_H32MXDIV | - AT91_PMC_MCKR_PLLADIV_2 | - AT91_PMC_MCKR_MDIV_3 | - AT91_PMC_MCKR_CSS_PLLA); -} -#endif diff --git a/board/atmel/sama5d2_ptc/Kconfig b/board/atmel/sama5d2_ptc_ek/Kconfig similarity index 60% rename from board/atmel/sama5d2_ptc/Kconfig rename to board/atmel/sama5d2_ptc_ek/Kconfig index d2661c689a..8b202d6ccf 100644 --- a/board/atmel/sama5d2_ptc/Kconfig +++ b/board/atmel/sama5d2_ptc_ek/Kconfig @@ -1,7 +1,7 @@ -if TARGET_SAMA5D2_PTC +if TARGET_SAMA5D2_PTC_EK config SYS_BOARD - default "sama5d2_ptc" + default "sama5d2_ptc_ek" config SYS_VENDOR default "atmel" @@ -10,6 +10,6 @@ config SYS_SOC default "at91" config SYS_CONFIG_NAME - default "sama5d2_ptc" + default "sama5d2_ptc_ek" endif diff --git a/board/atmel/sama5d2_ptc_ek/MAINTAINERS b/board/atmel/sama5d2_ptc_ek/MAINTAINERS new file mode 100644 index 0000000000..3c7b7f51c6 --- /dev/null +++ b/board/atmel/sama5d2_ptc_ek/MAINTAINERS @@ -0,0 +1,8 @@ +SAMA5D2 PTC EK BOARD +M: Wenyou Yang +M: Ludovic Desroches +S: Maintained +F: board/atmel/sama5d2_ptc_ek/ +F: include/configs/sama5d2_ptc_ek.h +F: configs/sama5d2_ptc_ek_mmc_defconfig +F: configs/sama5d2_ptc_ek_nandflash_defconfig diff --git a/board/atmel/sama5d2_ptc_ek/Makefile b/board/atmel/sama5d2_ptc_ek/Makefile new file mode 100644 index 0000000000..9fe4b410a1 --- /dev/null +++ b/board/atmel/sama5d2_ptc_ek/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2017 Microchip Corporation +# Wenyou Yang +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += sama5d2_ptc_ek.o diff --git a/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c b/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c new file mode 100644 index 0000000000..4c2e20977e --- /dev/null +++ b/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2017 Microchip Corporation + * Wenyou Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_NAND_ATMEL +static void board_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + + at91_periph_clk_enable(ATMEL_ID_HSMC); + + /* Configure SMC CS3 for NAND */ + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) | + AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) | + AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3) | + AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(3), + &smc->cs[3].mode); + + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 22, 0); /* D0 */ + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 23, 0); /* D1 */ + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 24, 0); /* D2 */ + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 25, 0); /* D3 */ + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 26, 0); /* D4 */ + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 27, 0); /* D5 */ + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 28, 0); /* D6 */ + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 29, 0); /* D7 */ + atmel_pio4_set_b_periph(AT91_PIO_PORTB, 2, 0); /* RE */ + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 30, 0); /* WE */ + atmel_pio4_set_b_periph(AT91_PIO_PORTA, 31, 1); /* NCS */ + atmel_pio4_set_b_periph(AT91_PIO_PORTC, 8, 1); /* RDY */ + atmel_pio4_set_b_periph(AT91_PIO_PORTB, 0, 1); /* ALE */ + atmel_pio4_set_b_periph(AT91_PIO_PORTB, 1, 1); /* CLE */ +} +#endif + +static void board_usb_hw_init(void) +{ + atmel_pio4_set_pio_output(AT91_PIO_PORTB, 12, 1); +} + +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +static void board_uart0_hw_init(void) +{ + atmel_pio4_set_c_periph(AT91_PIO_PORTB, 26, 1); /* URXD0 */ + atmel_pio4_set_c_periph(AT91_PIO_PORTB, 27, 0); /* UTXD0 */ + + at91_periph_clk_enable(ATMEL_ID_UART0); +} + +void board_debug_uart_init(void) +{ + board_uart0_hw_init(); +} +#endif + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#endif + return 0; +} +#endif + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_NAND_ATMEL + board_nand_hw_init(); +#endif +#ifdef CONFIG_CMD_USB + board_usb_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +#define AT24MAC_MAC_OFFSET 0xfa + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_I2C_EEPROM + at91_set_ethaddr(AT24MAC_MAC_OFFSET); +#endif + return 0; +} +#endif diff --git a/configs/sama5d2_ptc_ek_mmc_defconfig b/configs/sama5d2_ptc_ek_mmc_defconfig new file mode 100644 index 0000000000..03dc69b3d8 --- /dev/null +++ b/configs/sama5d2_ptc_ek_mmc_defconfig @@ -0,0 +1,60 @@ +CONFIG_ARM=y +CONFIG_ARCH_AT91=y +CONFIG_TARGET_SAMA5D2_PTC_EK=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_ptc_ek" +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC" +CONFIG_SD_BOOT=y +CONFIG_BOOTDELAY=3 +CONFIG_CONSOLE_MUX=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_AT91_GENERIC_CLK=y +CONFIG_DM_GPIO=y +CONFIG_ATMEL_PIO4=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_AT91=y +CONFIG_I2C_EEPROM=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ATMEL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91PIO4=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xf801c000 +CONFIG_DEBUG_UART_CLOCK=82000000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_TIMER=y +CONFIG_ATMEL_PIT_TIMER=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/configs/sama5d2_ptc_ek_nandflash_defconfig b/configs/sama5d2_ptc_ek_nandflash_defconfig new file mode 100644 index 0000000000..8340f818d6 --- /dev/null +++ b/configs/sama5d2_ptc_ek_nandflash_defconfig @@ -0,0 +1,60 @@ +CONFIG_ARM=y +CONFIG_ARCH_AT91=y +CONFIG_TARGET_SAMA5D2_PTC_EK=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_ptc_ek" +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y +CONFIG_BOOTDELAY=3 +CONFIG_CONSOLE_MUX=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_AT91_GENERIC_CLK=y +CONFIG_DM_GPIO=y +CONFIG_ATMEL_PIO4=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_AT91=y +CONFIG_I2C_EEPROM=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ATMEL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91PIO4=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xf801c000 +CONFIG_DEBUG_UART_CLOCK=82000000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_TIMER=y +CONFIG_ATMEL_PIT_TIMER=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/configs/sama5d2_ptc_nandflash_defconfig b/configs/sama5d2_ptc_nandflash_defconfig deleted file mode 100644 index cfbdbb0025..0000000000 --- a/configs/sama5d2_ptc_nandflash_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_SAMA5D2_PTC=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_NAND_BOOT=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,57600 earlyprintk mtdparts=atmel_nand:6M(bootstrap)ro, 6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=2 root=ubi0:rootfs" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_SPL=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_NAND=y -CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_NAND=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Atmel SAMA5D2_PTC" -CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_USB_ETHER=y diff --git a/configs/sama5d2_ptc_spiflash_defconfig b/configs/sama5d2_ptc_spiflash_defconfig deleted file mode 100644 index 25ee07740e..0000000000 --- a/configs/sama5d2_ptc_spiflash_defconfig +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_SAMA5D2_PTC=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SPI_BOOT=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,57600 earlyprintk mtdparts=atmel_nand:6M(bootstrap)ro, 6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=2 root=ubi0:rootfs" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_SPL=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_NAND=y -CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Atmel SAMA5D2_PTC" -CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_USB_ETHER=y diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h deleted file mode 100644 index c52dcd4e8f..0000000000 --- a/include/configs/sama5d2_ptc.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Configuration settings for the SAMA5D2 PTC Engineering board. - * - * Copyright (C) 2016 Atmel - * Wenyou Yang - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "at91-sama5_common.h" - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE 0xf801c000 -#define CONFIG_USART_ID 24 - -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE 0x20000000 - -#define CONFIG_SYS_TIMER_COUNTER 0xf804803c - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x210000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#undef CONFIG_AT91_GPIO -#define CONFIG_ATMEL_PIO4 - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 - -/* SerialFlash */ -#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH_ATMEL -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x80000000 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ONFI_DETECTION -/* PMECC & PMERRLOC */ -#define CONFIG_ATMEL_NAND_HWECC -#define CONFIG_ATMEL_NAND_HW_PMECC -#endif - -/* USB device */ - -/* Ethernet Hardware */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_MACB_SEARCH_PHY - -#ifdef CONFIG_NAND_BOOT -#undef CONFIG_ENV_OFFSET -#undef CONFIG_ENV_OFFSET_REDUND -#undef CONFIG_BOOTCOMMAND -/* u-boot env in nand flash */ -#define CONFIG_ENV_OFFSET 0x200000 -#define CONFIG_ENV_OFFSET_REDUND 0x400000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0xb80000 0x80000;" \ - "nand read 0x22000000 0x600000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" -#endif - -/* SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x200000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 - -#define CONFIG_SYS_MONITOR_LEN (512 << 10) - -#ifdef CONFIG_SPI_BOOT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 - -#elif CONFIG_NAND_BOOT -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_BASE -#endif -#define CONFIG_PMECC_CAP 8 -#define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_OOBSIZE 224 -#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 -#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER - -#endif diff --git a/include/configs/sama5d2_ptc_ek.h b/include/configs/sama5d2_ptc_ek.h new file mode 100644 index 0000000000..d99eaee18f --- /dev/null +++ b/include/configs/sama5d2_ptc_ek.h @@ -0,0 +1,46 @@ +/* + * Configuration file for the SAMA5D2 PTC EK Board. + * + * Copyright (C) 2017 Microchip Technology Inc. + * Wenyou Yang + * Ludovic Desroches + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "at91-sama5_common.h" + +#undef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ + +#define CONFIG_MISC_INIT_R + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x20000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +/* NAND Flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE BIT(21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE BIT(22) +#define CONFIG_SYS_NAND_ONFI_DETECTION +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#endif + +#endif /* __CONFIG_H */ -- 2.25.1