From a8b5031108a22f41234cc3b0c7e4e4e6f6e77cb8 Mon Sep 17 00:00:00 2001 From: Simon Goldschmidt Date: Tue, 16 Jul 2019 21:29:32 +0200 Subject: [PATCH] spl: kconfig: separate sysreset and firmware drivers from misc This adds separate kconfig options for drivers/sysreset and drivers/firmware. Up to now, CONFIG_SPL_DRIVERS_MISC_SUPPORT added drivers/misc to SPL build but also added drivers/firmware and drivers/sysreset at the same time. Since that is confusing, this patch uses CONFIG_SPL_SYSRESET for drivers/sysreset and adds CONFIG_SPL_FIRMWARE for drivers/firmware (and accordingly for the TPL options). CONFIG_SPL_DRIVERS_MISC_SUPPORT stays for including drivers/misc into the SPL build (and accordingly for TPL) since there are boards using non-DM (non UCLASS_MISC) files from drivers/misc. Such boards don't have CONFIG_SPL_MISC enabled, so cannot use this to include drivers/misc into the SPL build. Signed-off-by: Simon Goldschmidt --- configs/evb-rk3036_defconfig | 1 + configs/kylin-rk3036_defconfig | 1 + configs/sandbox_spl_defconfig | 1 + drivers/Makefile | 6 +++--- drivers/firmware/Kconfig | 7 ++++++- drivers/sysreset/Kconfig | 1 + 6 files changed, 13 insertions(+), 4 deletions(-) diff --git a/configs/evb-rk3036_defconfig b/configs/evb-rk3036_defconfig index 5e6bb54551..0eb7384340 100644 --- a/configs/evb-rk3036_defconfig +++ b/configs/evb-rk3036_defconfig @@ -47,6 +47,7 @@ CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_PINCTRL=y # CONFIG_SPL_DM_SERIAL is not set +# CONFIG_SPL_SYSRESET is not set CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYSRESET=y CONFIG_USB=y diff --git a/configs/kylin-rk3036_defconfig b/configs/kylin-rk3036_defconfig index 921af0d476..a76ae9d326 100644 --- a/configs/kylin-rk3036_defconfig +++ b/configs/kylin-rk3036_defconfig @@ -49,6 +49,7 @@ CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_PINCTRL=y CONFIG_DM_REGULATOR_FIXED=y # CONFIG_SPL_DM_SERIAL is not set +# CONFIG_SPL_SYSRESET is not set CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYSRESET=y CONFIG_USB=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 27034cfaa9..5b7dae9be6 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_FIRMWARE=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_BOOTSTAGE_STASH_ADDR=0x0 diff --git a/drivers/Makefile b/drivers/Makefile index 603aa98590..41933605ce 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -4,7 +4,9 @@ obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/ obj-$(CONFIG_$(SPL_TPL_)DM) += core/ obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/ obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/ -obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ +obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ +obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/ +obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/ obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/ obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/ obj-$(CONFIG_$(SPL_TPL_)LED) += led/ @@ -81,7 +83,6 @@ obj-y += cache/ obj-$(CONFIG_CPU) += cpu/ obj-y += crypto/ obj-$(CONFIG_FASTBOOT) += fastboot/ -obj-y += firmware/ obj-$(CONFIG_FPGA) += fpga/ obj-y += misc/ obj-$(CONFIG_MMC) += mmc/ @@ -96,7 +97,6 @@ obj-y += rtc/ obj-y += scsi/ obj-y += sound/ obj-y += spmi/ -obj-y += sysreset/ obj-y += video/ obj-y += watchdog/ obj-$(CONFIG_QE) += qe/ diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 7d8f161b26..873bc8c796 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -1,9 +1,13 @@ config FIRMWARE bool "Enable Firmware driver support" +config SPL_FIRMWARE + bool "Enable Firmware driver support in SPL" + depends on FIRMWARE + config SPL_ARM_PSCI_FW bool - select FIRMWARE + select SPL_FIRMWARE config ARM_PSCI_FW bool @@ -13,6 +17,7 @@ config TI_SCI_PROTOCOL tristate "TI System Control Interface (TISCI) Message Protocol" depends on K3_SEC_PROXY select FIRMWARE + select SPL_FIRMWARE if SPL help TI System Control Interface (TISCI) Message Protocol is used to manage compute systems such as ARM, DSP etc with the system controller in diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig index 024404d51d..90c41ab44d 100644 --- a/drivers/sysreset/Kconfig +++ b/drivers/sysreset/Kconfig @@ -50,6 +50,7 @@ config SYSRESET_MICROBLAZE config SYSRESET_PSCI bool "Enable support for PSCI System Reset" depends on ARM_PSCI_FW + select SPL_ARM_PSCI_FW if SPL help Enable PSCI SYSTEM_RESET function call. To use this, PSCI firmware must be running on your system. -- 2.25.1