From a7bcace28a7c966f14e2049d8a1027c9f0097593 Mon Sep 17 00:00:00 2001 From: Angelo Durgehello Date: Fri, 15 Nov 2019 23:54:18 +0100 Subject: [PATCH] drivers: mcffec: conversion to dm Full conversion to dm for all boards, legacy code removed. Signed-off-by: Angelo Durgehello --- doc/device-tree-bindings/net/fsl,mcf-fec.txt | 22 + drivers/net/mcffec.c | 587 +++++++++---------- 2 files changed, 315 insertions(+), 294 deletions(-) create mode 100644 doc/device-tree-bindings/net/fsl,mcf-fec.txt diff --git a/doc/device-tree-bindings/net/fsl,mcf-fec.txt b/doc/device-tree-bindings/net/fsl,mcf-fec.txt new file mode 100644 index 0000000000..39bbaa52f3 --- /dev/null +++ b/doc/device-tree-bindings/net/fsl,mcf-fec.txt @@ -0,0 +1,22 @@ +* Freescale ColdFire FEC ethernet controller + +Required properties: +- compatible: should be "fsl,mcf-fec" +- reg: address and length of the register set for the device. + +Optional properties: +- mii-base: index of FEC reg area, 0 for FEC0, 1 for FEC1 +- max-speed: max speedm Mbits/sec +- phy-addr: phy address +- timeout-loop: integer value for driver loops time out + + +Example: + +fec0: ethernet@fc030000 { + compatible = "fsl,mcf-fec"; + reg = <0xfc030000 0x400>; + mii-base = <0>; + phy-addr = <0>; + timeout-loop = <5000>; +}; diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 9a3a8455a1..4ec24362d0 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -5,17 +5,17 @@ * * (C) Copyright 2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * Conversion to DM + * (C) 2019 Angelo Dureghello */ #include #include #include - #include #include -#include #include - #include #include #include @@ -27,64 +27,68 @@ #define DBUF_LENGTH 1520 #define TX_BUF_CNT 2 #define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 #define PKT_MAXBLR_SIZE 1520 #define LAST_PKTBUFSRX PKTBUFSRX - 1 #define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY) #define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST) -struct fec_info_s fec_info[] = { -#ifdef CONFIG_SYS_FEC0_IOBASE - { - 0, /* index */ - CONFIG_SYS_FEC0_IOBASE, /* io base */ - CONFIG_SYS_FEC0_PINMUX, /* gpio pin muxing */ - CONFIG_SYS_FEC0_MIIBASE, /* mii base */ - -1, /* phy_addr */ - 0, /* duplex and speed */ - 0, /* phy name */ - 0, /* phyname init */ - 0, /* RX BD */ - 0, /* TX BD */ - 0, /* rx Index */ - 0, /* tx Index */ - 0, /* tx buffer */ - 0, /* initialized flag */ - (struct fec_info_s *)-1, - }, -#endif -#ifdef CONFIG_SYS_FEC1_IOBASE - { - 1, /* index */ - CONFIG_SYS_FEC1_IOBASE, /* io base */ - CONFIG_SYS_FEC1_PINMUX, /* gpio pin muxing */ - CONFIG_SYS_FEC1_MIIBASE, /* mii base */ - -1, /* phy_addr */ - 0, /* duplex and speed */ - 0, /* phy name */ - 0, /* phy name init */ +DECLARE_GLOBAL_DATA_PTR; + +static void init_eth_info(struct fec_info_s *info) +{ #ifdef CONFIG_SYS_FEC_BUF_USE_SRAM - (cbd_t *)DBUF_LENGTH, /* RX BD */ + static u32 tmp; + + if (info->index == 0) + tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000; + else + info->rxbd = (cbd_t *)DBUF_LENGTH; + + /* setup Receive and Transmit buffer descriptor */ + info->rxbd = (cbd_t *)((u32)info->rxbd + tmp); + tmp = (u32)info->rxbd; + info->txbd = + (cbd_t *)((u32)info->txbd + tmp + + (PKTBUFSRX * sizeof(cbd_t))); + tmp = (u32)info->txbd; + info->txbuf = + (char *)((u32)info->txbuf + tmp + + (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); + tmp = (u32)info->txbuf; #else - 0, /* RX BD */ + info->rxbd = + (cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE, + (PKTBUFSRX * sizeof(cbd_t))); + info->txbd = + (cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE, + (TX_BUF_CNT * sizeof(cbd_t))); + info->txbuf = + (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH); #endif - 0, /* TX BD */ - 0, /* rx Index */ - 0, /* tx Index */ - 0, /* tx buffer */ - 0, /* initialized flag */ - (struct fec_info_s *)-1, - } + +#ifdef ET_DEBUG + printf("rxbd %x txbd %x\n", (int)info->rxbd, (int)info->txbd); #endif -}; + info->phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32); +} + +static void fec_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *)(info->iobase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) + udelay(1); -int fec_recv(struct eth_device *dev); -int fec_init(struct eth_device *dev, bd_t * bd); -void fec_halt(struct eth_device *dev); -void fec_reset(struct eth_device *dev); + if (i == FEC_RESET_DELAY) + printf("FEC_RESET_DELAY timeout\n"); +} -void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd) +static void set_fec_duplex_speed(volatile fec_t *fecp, int dup_spd) { + bd_t *bd = gd->bd; + if ((dup_spd >> 16) == FULL) { /* Set maximum frame length */ fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE | @@ -116,138 +120,11 @@ void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd) } } -static int fec_send(struct eth_device *dev, void *packet, int length) -{ - struct fec_info_s *info = dev->priv; - volatile fec_t *fecp = (fec_t *) (info->iobase); - int j, rc; - u16 phyStatus; - - miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus); - - /* section 16.9.23.3 - * Wait for ready - */ - j = 0; - while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && - (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("TX not ready\n"); - } - - info->txbd[info->txIdx].cbd_bufaddr = (uint) packet; - info->txbd[info->txIdx].cbd_datlen = length; - info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST; - - /* Activate transmit Buffer Descriptor polling */ - fecp->tdar = 0x01000000; /* Descriptor polling active */ - -#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM - /* - * FEC unable to initial transmit data packet. - * A nop will ensure the descriptor polling active completed. - * CF Internal RAM has shorter cycle access than DRAM. If use - * DRAM as Buffer descriptor and data, a nop is a must. - * Affect only V2 and V3. - */ - __asm__ ("nop"); - -#endif - -#ifdef CONFIG_SYS_UNIFY_CACHE - icache_invalid(); -#endif - - j = 0; - while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && - (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("TX timeout\n"); - } - -#ifdef ET_DEBUG - printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", - __FILE__, __LINE__, __FUNCTION__, j, - info->txbd[info->txIdx].cbd_sc, - (info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2); -#endif - - /* return only status bits */ - rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS); - info->txIdx = (info->txIdx + 1) % TX_BUF_CNT; - - return rc; -} - -int fec_recv(struct eth_device *dev) -{ - struct fec_info_s *info = dev->priv; - volatile fec_t *fecp = (fec_t *) (info->iobase); - int length; - - for (;;) { -#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM -#endif -#ifdef CONFIG_SYS_UNIFY_CACHE - icache_invalid(); -#endif - /* section 16.9.23.2 */ - if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - length = info->rxbd[info->rxIdx].cbd_datlen; - - if (info->rxbd[info->rxIdx].cbd_sc & 0x003f) { - printf("%s[%d] err: %x\n", - __FUNCTION__, __LINE__, - info->rxbd[info->rxIdx].cbd_sc); -#ifdef ET_DEBUG - printf("%s[%d] err: %x\n", - __FUNCTION__, __LINE__, - info->rxbd[info->rxIdx].cbd_sc); -#endif - } else { - - length -= 4; - /* Pass the packet up to the protocol layers. */ - net_process_received_packet(net_rx_packets[info->rxIdx], - length); - - fecp->eir |= FEC_EIR_RXF; - } - - /* Give the buffer back to the FEC. */ - info->rxbd[info->rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if (info->rxIdx == LAST_PKTBUFSRX) { - info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E; - info->rxIdx = 0; - } else { - info->rxbd[info->rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - info->rxIdx++; - } - - /* Try to fill Buffer Descriptors */ - fecp->rdar = 0x01000000; /* Descriptor polling active */ - } - - return length; -} - #ifdef ET_DEBUG -void dbgFecRegs(struct eth_device *dev) +static void dbg_fec_regs(struct udevice *dev) { struct fec_info_s *info = dev->priv; - volatile fec_t *fecp = (fec_t *) (info->iobase); + volatile fec_t *fecp = (fec_t *)(info->iobase); printf("=====\n"); printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir); @@ -394,28 +271,27 @@ void dbgFecRegs(struct eth_device *dev) } #endif -int fec_init(struct eth_device *dev, bd_t * bd) +int mcffec_init(struct udevice *dev) { struct fec_info_s *info = dev->priv; volatile fec_t *fecp = (fec_t *) (info->iobase); - int i; + int rval, i; uchar ea[6]; - fecpin_setclear(dev, 1); - - fec_reset(dev); + fecpin_setclear(info, 1); + fec_reset(info); #if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \ defined (CONFIG_SYS_DISCOVER_PHY) mii_init(); - setFecDuplexSpeed(fecp, bd, info->dup_spd); + set_fec_duplex_speed(fecp, info->dup_spd); #else #ifndef CONFIG_SYS_DISCOVER_PHY - setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED); -#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */ -#endif /* CONFIG_CMD_MII || CONFIG_MII */ + set_fec_duplex_speed(fecp, (FECDUPLEX << 16) | FECSPEED); +#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */ +#endif /* CONFIG_CMD_MII || CONFIG_MII */ /* We use strictly polling mode only */ fecp->eimr = 0; @@ -424,34 +300,20 @@ int fec_init(struct eth_device *dev, bd_t * bd) fecp->eir = 0xffffffff; /* Set station address */ - if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) { -#ifdef CONFIG_SYS_FEC1_IOBASE - volatile fec_t *fecp1 = (fec_t *) (CONFIG_SYS_FEC1_IOBASE); - eth_env_get_enetaddr("eth1addr", ea); - fecp1->palr = - (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp1->paur = (ea[4] << 24) | (ea[5] << 16); -#endif - eth_env_get_enetaddr("ethaddr", ea); - fecp->palr = - (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp->paur = (ea[4] << 24) | (ea[5] << 16); - } else { -#ifdef CONFIG_SYS_FEC0_IOBASE - volatile fec_t *fecp0 = (fec_t *) (CONFIG_SYS_FEC0_IOBASE); - eth_env_get_enetaddr("ethaddr", ea); - fecp0->palr = - (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp0->paur = (ea[4] << 24) | (ea[5] << 16); -#endif -#ifdef CONFIG_SYS_FEC1_IOBASE - eth_env_get_enetaddr("eth1addr", ea); - fecp->palr = - (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp->paur = (ea[4] << 24) | (ea[5] << 16); -#endif + if (info->index == 0) + rval = eth_env_get_enetaddr("ethaddr", ea); + else + rval = eth_env_get_enetaddr("eth1addr", ea); + + if (!rval) { + puts("Please set a valid MAC address\n"); + return -EINVAL; } + fecp->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); + /* Clear unicast address hash table */ fecp->iaur = 0; fecp->ialr = 0; @@ -466,8 +328,8 @@ int fec_init(struct eth_device *dev, bd_t * bd) /* * Setup Buffers and Buffer Descriptors */ - info->rxIdx = 0; - info->txIdx = 0; + info->rx_idx = 0; + info->tx_idx = 0; /* * Setup Receiver Buffer Descriptors (13.14.24.18) @@ -500,119 +362,256 @@ int fec_init(struct eth_device *dev, bd_t * bd) /* Now enable the transmit and receive processing */ fecp->ecr |= FEC_ECR_ETHER_EN; - /* And last, try to fill Rx Buffer Descriptors */ - fecp->rdar = 0x01000000; /* Descriptor polling active */ + /* And last, try to fill Rx Buffer Descriptors + * Descriptor polling active + */ + fecp->rdar = 0x01000000; - return 1; + return 0; } -void fec_reset(struct eth_device *dev) +static int mcffec_send(struct udevice *dev, void *packet, int length) { struct fec_info_s *info = dev->priv; - volatile fec_t *fecp = (fec_t *) (info->iobase); - int i; + volatile fec_t *fecp = (fec_t *)info->iobase; + int j, rc; + u16 phy_status; - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phy_status); + + /* section 16.9.23.3 + * Wait for ready + */ + j = 0; + while ((info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_READY) && + (j < info->to_loop)) { udelay(1); + j++; } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); + if (j >= info->to_loop) + printf("TX not ready\n"); + + info->txbd[info->tx_idx].cbd_bufaddr = (uint)packet; + info->txbd[info->tx_idx].cbd_datlen = length; + info->txbd[info->tx_idx].cbd_sc |= BD_ENET_TX_RDY_LST; + + /* Activate transmit Buffer Descriptor polling */ + fecp->tdar = 0x01000000; /* Descriptor polling active */ + +#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM + /* + * FEC unable to initial transmit data packet. + * A nop will ensure the descriptor polling active completed. + * CF Internal RAM has shorter cycle access than DRAM. If use + * DRAM as Buffer descriptor and data, a nop is a must. + * Affect only V2 and V3. + */ + __asm__ ("nop"); +#endif + +#ifdef CONFIG_SYS_UNIFY_CACHE + icache_invalid(); +#endif + + j = 0; + while ((info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_READY) && + (j < info->to_loop)) { + udelay(1); + j++; + } + if (j >= info->to_loop) + printf("TX timeout\n"); + +#ifdef ET_DEBUG + printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", + __FILE__, __LINE__, __func__, j, + info->txbd[info->tx_idx].cbd_sc, + (info->txbd[info->tx_idx].cbd_sc & 0x003C) >> 2); +#endif + + /* return only status bits */ + rc = (info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_STATS); + info->tx_idx = (info->tx_idx + 1) % TX_BUF_CNT; + + return rc; +} + +static int mcffec_recv(struct udevice *dev, int flags, uchar **packetp) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *)info->iobase; + int length = -1; + + for (;;) { +#ifdef CONFIG_SYS_UNIFY_CACHE + icache_invalid(); +#endif + /* If nothing received - leave for() loop */ + if (info->rxbd[info->rx_idx].cbd_sc & BD_ENET_RX_EMPTY) + break; + + length = info->rxbd[info->rx_idx].cbd_datlen; + + if (info->rxbd[info->rx_idx].cbd_sc & 0x003f) { + printf("%s[%d] err: %x\n", + __func__, __LINE__, + info->rxbd[info->rx_idx].cbd_sc); + } else { + length -= 4; + + /* + * Pass the buffer ptr up to the protocol layers. + */ + *packetp = net_rx_packets[info->rx_idx]; + + fecp->eir |= FEC_EIR_RXF; + } + + /* Give the buffer back to the FEC. */ + info->rxbd[info->rx_idx].cbd_datlen = 0; + + /* wrap around buffer index when necessary */ + if (info->rx_idx == LAST_PKTBUFSRX) { + info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E; + info->rx_idx = 0; + } else { + info->rxbd[info->rx_idx].cbd_sc = BD_ENET_RX_EMPTY; + info->rx_idx++; + } + + /* Try to fill Buffer Descriptors + * Descriptor polling active + */ + fecp->rdar = 0x01000000; } + + return length; } -void fec_halt(struct eth_device *dev) +static void mcffec_halt(struct udevice *dev) { struct fec_info_s *info = dev->priv; - fec_reset(dev); + fec_reset(info); + fecpin_setclear(info, 0); - fecpin_setclear(dev, 0); + info->rx_idx = 0; + info->tx_idx = 0; - info->rxIdx = info->txIdx = 0; memset(info->rxbd, 0, PKTBUFSRX * sizeof(cbd_t)); memset(info->txbd, 0, TX_BUF_CNT * sizeof(cbd_t)); memset(info->txbuf, 0, DBUF_LENGTH); } -int mcffec_initialize(bd_t * bis) +static const struct eth_ops mcffec_ops = { + .start = mcffec_init, + .send = mcffec_send, + .recv = mcffec_recv, + .stop = mcffec_halt, +}; + +/* + * Boot sequence, called just after mcffec_ofdata_to_platdata, + * as DM way, it replaces old mcffec_initialize. + */ +static int mcffec_probe(struct udevice *dev) { - struct eth_device *dev; - int i; -#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM - u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000; -#endif + struct eth_pdata *pdata = dev_get_platdata(dev); + struct fec_info_s *info = dev->priv; + int node = dev_of_offset(dev); + int retval, fec_idx; + const u32 *val; - for (i = 0; i < ARRAY_SIZE(fec_info); i++) { + info->index = dev->seq; + info->iobase = pdata->iobase; + info->phy_addr = -1; - dev = - (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE, - sizeof *dev); - if (dev == NULL) - hang(); + val = fdt_getprop(gd->fdt_blob, node, "mii-base", NULL); + if (val) { + u32 fec_iobase; - memset(dev, 0, sizeof(*dev)); + fec_idx = fdt32_to_cpu(*val); + if (fec_idx == info->index) { + fec_iobase = info->iobase; + } else { + printf("mii base != base address, fec_idx %d\n", + fec_idx); + retval = fec_get_base_addr(fec_idx, &fec_iobase); + if (retval) + return retval; + } + info->miibase = fec_iobase; + } - sprintf(dev->name, "FEC%d", fec_info[i].index); + val = fdt_getprop(gd->fdt_blob, node, "phy-addr", NULL); + if (val) + info->phy_addr = fdt32_to_cpu(*val); - dev->priv = &fec_info[i]; - dev->init = fec_init; - dev->halt = fec_halt; - dev->send = fec_send; - dev->recv = fec_recv; + val = fdt_getprop(gd->fdt_blob, node, "timeout-loop", NULL); + if (val) + info->to_loop = fdt32_to_cpu(*val); - /* setup Receive and Transmit buffer descriptor */ -#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM - fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp); - tmp = (u32)fec_info[i].rxbd; - fec_info[i].txbd = - (cbd_t *)((u32)fec_info[i].txbd + tmp + - (PKTBUFSRX * sizeof(cbd_t))); - tmp = (u32)fec_info[i].txbd; - fec_info[i].txbuf = - (char *)((u32)fec_info[i].txbuf + tmp + - (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); - tmp = (u32)fec_info[i].txbuf; -#else - fec_info[i].rxbd = - (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE, - (PKTBUFSRX * sizeof(cbd_t))); - fec_info[i].txbd = - (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE, - (TX_BUF_CNT * sizeof(cbd_t))); - fec_info[i].txbuf = - (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH); -#endif + init_eth_info(info); -#ifdef ET_DEBUG - printf("rxbd %x txbd %x\n", - (int)fec_info[i].rxbd, (int)fec_info[i].txbd); +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) + info->bus = mdio_alloc(); + if (!info->bus) + return -ENOMEM; + strcpy(info->bus->name, dev->name); + info->bus->read = mcffec_miiphy_read; + info->bus->write = mcffec_miiphy_write; + + retval = mdio_register(info->bus); + if (retval < 0) + return retval; #endif - fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32); + return 0; +} - eth_register(dev); +static int mcffec_remove(struct udevice *dev) +{ + struct fec_info_s *priv = dev_get_priv(dev); -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - int retval; - struct mii_dev *mdiodev = mdio_alloc(); - if (!mdiodev) - return -ENOMEM; - strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN); - mdiodev->read = mcffec_miiphy_read; - mdiodev->write = mcffec_miiphy_write; - - retval = mdio_register(mdiodev); - if (retval < 0) - return retval; -#endif - if (i > 0) - fec_info[i - 1].next = &fec_info[i]; - } - fec_info[i - 1].next = &fec_info[0]; + mdio_unregister(priv->bus); + mdio_free(priv->bus); + + return 0; +} + +/* + * Boot sequence, called 1st + */ +static int mcffec_ofdata_to_platdata(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + const u32 *val; - /* default speed */ - bis->bi_ethspeed = 10; + pdata->iobase = (phys_addr_t)devfdt_get_addr(dev); + /* Default to 10Mbit/s */ + pdata->max_speed = 10; + + val = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), + "max-speed", NULL); + if (val) + pdata->max_speed = fdt32_to_cpu(*val); return 0; } + +static const struct udevice_id mcffec_ids[] = { + { .compatible = "fsl,mcf-fec" }, + { } +}; + +U_BOOT_DRIVER(mcffec) = { + .name = "mcffec", + .id = UCLASS_ETH, + .of_match = mcffec_ids, + .ofdata_to_platdata = mcffec_ofdata_to_platdata, + .probe = mcffec_probe, + .remove = mcffec_remove, + .ops = &mcffec_ops, + .priv_auto_alloc_size = sizeof(struct fec_info_s), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; -- 2.25.1