From a719a62c696ad48d775f24b68e5f446a29e1f908 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Thu, 18 Jul 2019 00:34:20 -0700 Subject: [PATCH] doc: board: Convert README.sifive-fu540 to reST Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng --- doc/README.sifive-fu540 | 273 ------------------------------- doc/board/index.rst | 1 + doc/board/sifive/fu540.rst | 320 +++++++++++++++++++++++++++++++++++++ 3 files changed, 321 insertions(+), 273 deletions(-) delete mode 100644 doc/README.sifive-fu540 create mode 100644 doc/board/sifive/fu540.rst diff --git a/doc/README.sifive-fu540 b/doc/README.sifive-fu540 deleted file mode 100644 index 944ba1c8a0..0000000000 --- a/doc/README.sifive-fu540 +++ /dev/null @@ -1,273 +0,0 @@ -FU540-C000 RISC-V SoC -===================== -The FU540-C000 is the world’s first 4+1 64-bit RISC‑V SoC from SiFive. - -The HiFive Unleashed development platform is based on FU540-C000 and capable -of running Linux. - -Mainline support -================ -The support for following drivers are already enabled: -1. SiFive UART Driver. -2. SiFive PRCI Driver for clock. -3. Cadence MACB ethernet driver for networking support. - -TODO: -1. U-Boot expects the serial console device entry to be present under /chosen - DT node. Example: - chosen { - stdout-path = "/soc/serial@10010000:115200"; - }; - - Without a serial console U-Boot will panic. - -Building -======== -1. Add the RISC-V toolchain to your PATH. -2. Setup ARCH & cross compilation enviornment variable. - a. export ARCH=riscv - b. export CROSS_COMPILE= -3. make sifive_fu540_defconfig -4. make - -Flashing -======== -The current U-Boot port is supported in S-mode only and loaded directly -into DRAM. - -A prior stage (M-mode) firmware/bootloader (e.g OpenSBI) is required to -boot the u-boot.bin in S-mode and provide M-mode runtime services. - -Currently, the u-boot.bin is used as a payload of the OpenSBI FW_PAYLOAD -firmware. We need to compile OpenSBI with below command: -make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH= FW_PAYLOAD_FDT_PATH= -(Note: Prefer hifive-unleashed-a00.dtb from Linux-5.3 or higher) -(Note: Linux-5.2 is also fine but it does not have ethernet DT node) - -More detailed description of steps required to build FW_PAYLOAD firmware -is beyond the scope of this document. Please refer OpenSBI documenation. -(Note: OpenSBI git repo is at https://github.com/riscv/opensbi.git) - -Once the prior stage firmware/bootloader binary is generated, it should be -copied to the first partition of the sdcard. - -sudo dd if= of=/dev/disk2s1 bs=1024 - -Booting -======= -Once you plugin the sdcard and power up, you should see the U-Boot prompt. - -Sample boot log from HiFive Unleashed board -=========================================== -U-Boot 2019.07-rc4-00013-g1837f893b0 (Jun 20 2019 - 11:08:48 +0530) - -CPU: rv64imafdc -Model: SiFive HiFive Unleashed A00 -DRAM: 8 GiB -In: serial@10010000 -Out: serial@10010000 -Err: serial@10010000 -Net: eth0: ethernet@10090000 -Hit any key to stop autoboot: 0 -=> version -U-Boot 2019.07-rc4-00013-g1837f893b0 (Jun 20 2019 - 11:08:48 +0530) - -riscv64-linux-gcc.br_real (Buildroot 2018.11-rc2-00003-ga0787e9) 8.2.0 -GNU ld (GNU Binutils) 2.31.1 -=> -=============================================================================== - -Now you can configure your networking, tftp server and use tftp boot method to -load uImage. - -========================================================================== -=> setenv ipaddr 10.206.5.241 -=> setenv netmask 255.255.252.0 -=> setenv serverip 10.206.4.143 -=> setenv gateway 10.206.4.1 -=> tftpboot ${kernel_addr_r} /sifive/fu540/uImage -ethernet@10090000: PHY present at 0 -ethernet@10090000: Starting autonegotiation... -ethernet@10090000: Autonegotiation complete -ethernet@10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00) -Using ethernet@10090000 device -TFTP from server 10.206.4.143; our IP address is 10.206.5.241 -Filename '/sifive/fu540/uImage'. -Load address: 0x80600000 -Loading: ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ######################################## - 1.5 MiB/s -done -Bytes transferred = 9162364 (8bce7c hex) -=> tftpboot ${ramdisk_addr_r} /sifive/fu540/uRamdisk -ethernet@10090000: PHY present at 0 -ethernet@10090000: Starting autonegotiation... -ethernet@10090000: Autonegotiation complete -ethernet@10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00) -Using ethernet@10090000 device -TFTP from server 10.206.4.143; our IP address is 10.206.5.241 -Filename '/sifive/fu540/uRamdisk'. -Load address: 0x82500000 -Loading: ################################################################# - ################################################################# - ################################## - 448.2 KiB/s -done -Bytes transferred = 2398272 (249840 hex) -=> setenv bootargs "root=/dev/ram rw console=ttySIF0 earlycon=sbi" -=> bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdtcontroladdr} -## Booting kernel from Legacy Image at 80600000 ... - Image Name: Linux - Image Type: RISC-V Linux Kernel Image (uncompressed) - Data Size: 9162300 Bytes = 8.7 MiB - Load Address: 80200000 - Entry Point: 80200000 - Verifying Checksum ... OK -## Loading init Ramdisk from Legacy Image at 82500000 ... - Image Name: Linux RootFS - Image Type: RISC-V Linux RAMDisk Image (uncompressed) - Data Size: 2398208 Bytes = 2.3 MiB - Load Address: 00000000 - Entry Point: 00000000 - Verifying Checksum ... OK -## Flattened Device Tree blob at ff795730 - Booting using the fdt blob at 0xff795730 - Loading Kernel Image ... OK - Using Device Tree in place at 00000000ff795730, end 00000000ff799dac - -Starting kernel ... - -[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 -[ 0.000000] Linux version 5.2.0-rc1-00003-gb9543e66e700 (anup@anup-lab-machine) (gcc version 8.2.0 (Buildroot 2018.11-rc2-00003-ga0787e9)) #1 SMP Thu Jun 20 11:41:26 IST 2019 -[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '') -[ 0.000000] printk: bootconsole [sbi0] enabled -[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (2398208 bytes) -[ 0.000000] Zone ranges: -[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000ffffffff] -[ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] -[ 0.000000] Movable zone start for each node -[ 0.000000] Early memory node ranges -[ 0.000000] node 0: [mem 0x0000000080200000-0x000000027fffffff] -[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff] -[ 0.000000] software IO TLB: mapped [mem 0xfb795000-0xff795000] (64MB) -[ 0.000000] CPU with hartid=0 is not available -[ 0.000000] CPU with hartid=0 is not available -[ 0.000000] elf_hwcap is 0x112d -[ 0.000000] percpu: Embedded 17 pages/cpu s29592 r8192 d31848 u69632 -[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2067975 -[ 0.000000] Kernel command line: root=/dev/ram rw console=ttySIF0 earlycon=sbi -[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) -[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) -[ 0.000000] Sorting __ex_table... -[ 0.000000] Memory: 8182056K/8386560K available (5753K kernel code, 357K rwdata, 1804K rodata, 204K init, 808K bss, 204504K reserved, 0K cma-reserved) -[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 -[ 0.000000] rcu: Hierarchical RCU implementation. -[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. -[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. -[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 -[ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 -[ 0.000000] plic: mapped 53 interrupts with 4 handlers for 9 contexts. -[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [2] -[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns -[ 0.000007] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns -[ 0.008553] Console: colour dummy device 80x25 -[ 0.012990] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000) -[ 0.023103] pid_max: default: 32768 minimum: 301 -[ 0.028269] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) -[ 0.035068] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) -[ 0.042770] *** VALIDATE proc *** -[ 0.045610] *** VALIDATE cgroup1 *** -[ 0.049157] *** VALIDATE cgroup2 *** -[ 0.053743] rcu: Hierarchical SRCU implementation. -[ 0.058297] smp: Bringing up secondary CPUs ... -[ 0.064134] smp: Brought up 1 node, 4 CPUs -[ 0.069114] devtmpfs: initialized -[ 0.073281] random: get_random_u32 called from bucket_table_alloc.isra.10+0x4e/0x160 with crng_init=0 -[ 0.082157] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns -[ 0.091634] futex hash table entries: 1024 (order: 4, 65536 bytes) -[ 0.098480] NET: Registered protocol family 16 -[ 0.114101] vgaarb: loaded -[ 0.116397] SCSI subsystem initialized -[ 0.120358] usbcore: registered new interface driver usbfs -[ 0.125541] usbcore: registered new interface driver hub -[ 0.130936] usbcore: registered new device driver usb -[ 0.136618] clocksource: Switched to clocksource riscv_clocksource -[ 0.148108] NET: Registered protocol family 2 -[ 0.152358] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) -[ 0.159928] TCP established hash table entries: 65536 (order: 7, 524288 bytes) -[ 0.169027] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) -[ 0.178360] TCP: Hash tables configured (established 65536 bind 65536) -[ 0.184653] UDP hash table entries: 4096 (order: 5, 131072 bytes) -[ 0.190819] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) -[ 0.197618] NET: Registered protocol family 1 -[ 0.201892] RPC: Registered named UNIX socket transport module. -[ 0.207395] RPC: Registered udp transport module. -[ 0.212159] RPC: Registered tcp transport module. -[ 0.216940] RPC: Registered tcp NFSv4.1 backchannel transport module. -[ 0.223445] PCI: CLS 0 bytes, default 64 -[ 0.227726] Unpacking initramfs... -[ 0.260556] Freeing initrd memory: 2336K -[ 0.264652] workingset: timestamp_bits=62 max_order=21 bucket_order=0 -[ 0.278452] NFS: Registering the id_resolver key type -[ 0.282841] Key type id_resolver registered -[ 0.287067] Key type id_legacy registered -[ 0.291155] nfs4filelayout_init: NFSv4 File Layout Driver Registering... -[ 0.298299] NET: Registered protocol family 38 -[ 0.302470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) -[ 0.309906] io scheduler mq-deadline registered -[ 0.314501] io scheduler kyber registered -[ 0.354134] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled -[ 0.360725] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 4, base_baud = 0) is a SiFive UART v0 -[ 0.369191] printk: console [ttySIF0] enabled -[ 0.369191] printk: console [ttySIF0] enabled -[ 0.377938] printk: bootconsole [sbi0] disabled -[ 0.377938] printk: bootconsole [sbi0] disabled -[ 0.387298] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 1, base_baud = 0) is a SiFive UART v0 -[ 0.396411] [drm] radeon kernel modesetting enabled. -[ 0.409818] loop: module loaded -[ 0.412606] libphy: Fixed MDIO Bus: probed -[ 0.416870] macb 10090000.ethernet: Registered clk switch 'sifive-gemgxl-mgmt' -[ 0.423570] macb: GEM doesn't support hardware ptp. -[ 0.428469] libphy: MACB_mii_bus: probed -[ 1.053009] Microsemi VSC8541 SyncE 10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL) -[ 1.067548] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 7 (70:b3:d5:92:f2:f3) -[ 1.077330] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k -[ 1.083069] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. -[ 1.089061] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver -[ 1.095485] ehci-pci: EHCI PCI platform driver -[ 1.099947] ehci-platform: EHCI generic platform driver -[ 1.105196] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver -[ 1.111286] ohci-pci: OHCI PCI platform driver -[ 1.115742] ohci-platform: OHCI generic platform driver -[ 1.121142] usbcore: registered new interface driver uas -[ 1.126269] usbcore: registered new interface driver usb-storage -[ 1.132331] mousedev: PS/2 mouse device common for all mice -[ 1.137978] usbcore: registered new interface driver usbhid -[ 1.143325] usbhid: USB HID core driver -[ 1.148022] NET: Registered protocol family 10 -[ 1.152609] Segment Routing with IPv6 -[ 1.155571] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver -[ 1.161927] NET: Registered protocol family 17 -[ 1.165907] Key type dns_resolver registered -[ 1.171694] Freeing unused kernel memory: 204K -[ 1.175375] This architecture does not have kernel memory protection. -[ 1.181792] Run /init as init process - _ _ - | ||_| - | | _ ____ _ _ _ _ - | || | _ \| | | |\ \/ / - | || | | | | |_| |/ \ - |_||_|_| |_|\____|\_/\_/ - - Busybox Rootfs - -Please press Enter to activate this console. -/ # diff --git a/doc/board/index.rst b/doc/board/index.rst index 1cf0bc6194..f9aa5c987f 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -11,3 +11,4 @@ Board-specific doc emulation/index google/index intel/index + sifive/index diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst new file mode 100644 index 0000000000..594f1fed9d --- /dev/null +++ b/doc/board/sifive/fu540.rst @@ -0,0 +1,320 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +HiFive Unleashed +================ + +FU540-C000 RISC-V SoC +--------------------- +The FU540-C000 is the world’s first 4+1 64-bit RISC-V SoC from SiFive. + +The HiFive Unleashed development platform is based on FU540-C000 and capable +of running Linux. + +Mainline support +---------------- +The support for following drivers are already enabled: + +1. SiFive UART Driver. +2. SiFive PRCI Driver for clock. +3. Cadence MACB ethernet driver for networking support. + +TODO: + +1. U-Boot expects the serial console device entry to be present under /chosen + DT node. Without a serial console U-Boot will panic. Example: + +.. code-block:: none + + chosen { + stdout-path = "/soc/serial@10010000:115200"; + }; + +Building +-------- + +1. Add the RISC-V toolchain to your PATH. +2. Setup ARCH & cross compilation enviornment variable: + +.. code-block:: none + + export ARCH=riscv + export CROSS_COMPILE= + +3. make sifive_fu540_defconfig +4. make + +Flashing +-------- + +The current U-Boot port is supported in S-mode only and loaded from DRAM. + +A prior stage (M-mode) firmware/bootloader (e.g OpenSBI or BBL) is required to +load the u-boot.bin into memory and provide runtime services. The u-boot.bin +can be given as a payload to the prior stage (M-mode) firmware/bootloader. + +The description of steps required to build the firmware is beyond the scope of +this document. Please refer OpenSBI or BBL documenation. +(Note: OpenSBI git repo is at https://github.com/riscv/opensbi.git) +(Note: BBL git repo is at https://github.com/riscv/riscv-pk.git) + +Once the prior stage firmware/bootloader binary is generated, it should be +copied to the first partition of the sdcard. + +.. code-block:: none + + sudo dd if= of=/dev/disk2s1 bs=1024 + +Booting +------- +Once you plugin the sdcard and power up, you should see the U-Boot prompt. + +Sample boot log from HiFive Unleashed board +------------------------------------------- + +.. code-block:: none + + U-Boot 2019.01-00019-gc7953536-dirty (Jan 22 2019 - 11:05:40 -0800) + + CPU: rv64imafdc + Model: sifive,hifive-unleashed-a00 + DRAM: 8 GiB + In: serial@10010000 + Out: serial@10010000 + Err: serial@10010000 + Net: + Warning: ethernet@10090000 (eth0) using random MAC address - b6:75:4d:48:50:94 + eth0: ethernet@10090000 + Hit any key to stop autoboot: 0 + => version + U-Boot 2019.01-00019-gc7953536-dirty (Jan 22 2019 - 11:05:40 -0800) + + riscv64-linux-gcc.br_real (Buildroot 2018.11-rc2-00003-ga0787e9) 8.2.0 + GNU ld (GNU Binutils) 2.31.1 + +Now you can configure your networking, tftp server and use tftp boot method to +load uImage. + +.. code-block:: none + + => setenv ethaddr 70:B3:D5:92:F0:C2 + => setenv ipaddr 10.196.157.189 + => setenv serverip 10.11.143.218 + => setenv gatewayip 10.196.156.1 + => setenv netmask 255.255.252.0 + => bdinfo + boot_params = 0x0000000000000000 + DRAM bank = 0x0000000000000000 + -> start = 0x0000000080000000 + -> size = 0x0000000200000000 + relocaddr = 0x00000000fff90000 + reloc off = 0x000000007fd90000 + ethaddr = 70:B3:D5:92:F0:C2 + IP addr = 10.196.157.189 + baudrate = 115200 bps + => tftpboot uImage + ethernet@10090000: PHY present at 0 + ethernet@10090000: Starting autonegotiation... + ethernet@10090000: Autonegotiation complete + ethernet@10090000: link up, 1000Mbps full-duplex (lpa: 0x3800) + Using ethernet@10090000 device + TFTP from server 10.11.143.218; our IP address is 10.196.157.189; sending through gateway 10.196.156.1 + Filename 'uImage'. + Load address: 0x80200000 + Loading: ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ########################################################## + 2.5 MiB/s + done + Bytes transferred = 14939132 (e3f3fc hex) + => bootm 0x80200000 - 0x82200000 + ## Booting kernel from Legacy Image at 80200000 ... + Image Name: Linux + Image Type: RISC-V Linux Kernel Image (uncompressed) + Data Size: 14939068 Bytes = 14.2 MiB + Load Address: 80200000 + Entry Point: 80200000 + Verifying Checksum ... OK + ## Flattened Device Tree blob at 82200000 + Booting using the fdt blob at 0x82200000 + Loading Kernel Image ... OK + Using Device Tree in place at 0000000082200000, end 0000000082205c69 + + Starting kernel ... + + [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 + [ 0.000000] Linux version 5.0.0-rc1-00020-g4b51f736 (atish@jedi-01) (gcc version 7.2.0 (GCC)) #262 SMP Mon Jan 21 17:39:27 PST 2019 + [ 0.000000] initrd not found or empty - disabling initrd + [ 0.000000] Zone ranges: + [ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000ffffffff] + [ 0.000000] Normal [mem 0x0000000100000000-0x000027ffffffffff] + [ 0.000000] Movable zone start for each node + [ 0.000000] Early memory node ranges + [ 0.000000] node 0: [mem 0x0000000080200000-0x000000027fffffff] + [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff] + [ 0.000000] software IO TLB: mapped [mem 0xfbfff000-0xfffff000] (64MB) + [ 0.000000] CPU with hartid=0 has a non-okay status of "masked" + [ 0.000000] CPU with hartid=0 has a non-okay status of "masked" + [ 0.000000] elf_hwcap is 0x112d + [ 0.000000] percpu: Embedded 15 pages/cpu @(____ptrval____) s29720 r0 d31720 u61440 + [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2067975 + [ 0.000000] Kernel command line: earlyprintk + [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) + [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) + [ 0.000000] Sorting __ex_table... + [ 0.000000] Memory: 8178760K/8386560K available (3309K kernel code, 248K rwdata, 872K rodata, 9381K init, 763K bss, 207800K reserved, 0K cma-reserved) + [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 + [ 0.000000] rcu: Hierarchical RCU implementation. + [ 0.000000] rcu: RCU event tracing is enabled. + [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. + [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. + [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 + [ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 + [ 0.000000] plic: mapped 53 interrupts to 4 (out of 9) handlers. + [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1] + [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns + [ 0.000008] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns + [ 0.000221] Console: colour dummy device 80x25 + [ 0.000902] printk: console [tty0] enabled + [ 0.000963] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) + [ 0.001034] pid_max: default: 32768 minimum: 301 + [ 0.001541] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) + [ 0.001912] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) + [ 0.003542] rcu: Hierarchical SRCU implementation. + [ 0.004347] smp: Bringing up secondary CPUs ... + [ 1.040259] CPU1: failed to come online + [ 2.080483] CPU2: failed to come online + [ 3.120699] CPU3: failed to come online + [ 3.120765] smp: Brought up 1 node, 1 CPU + [ 3.121923] devtmpfs: initialized + [ 3.124649] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns + [ 3.124727] futex hash table entries: 1024 (order: 4, 65536 bytes) + [ 3.125346] random: get_random_u32 called from bucket_table_alloc+0x72/0x172 with crng_init=0 + [ 3.125578] NET: Registered protocol family 16 + [ 3.126400] sifive-u54-prci 10000000.prci: Registered U54 core clocks + [ 3.126649] sifive-gemgxl-mgmt 100a0000.cadence-gemgxl-mgmt: Registered clock switch 'cadence-gemgxl-mgmt' + [ 3.135572] vgaarb: loaded + [ 3.135858] SCSI subsystem initialized + [ 3.136193] usbcore: registered new interface driver usbfs + [ 3.136266] usbcore: registered new interface driver hub + [ 3.136348] usbcore: registered new device driver usb + [ 3.136446] pps_core: LinuxPPS API ver. 1 registered + [ 3.136484] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti + [ 3.136575] PTP clock support registered + [ 3.137256] clocksource: Switched to clocksource riscv_clocksource + [ 3.142711] NET: Registered protocol family 2 + [ 3.143322] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) + [ 3.143634] TCP established hash table entries: 65536 (order: 7, 524288 bytes) + [ 3.145799] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) + [ 3.149121] TCP: Hash tables configured (established 65536 bind 65536) + [ 3.149591] UDP hash table entries: 4096 (order: 5, 131072 bytes) + [ 3.150094] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) + [ 3.150781] NET: Registered protocol family 1 + [ 3.230693] workingset: timestamp_bits=62 max_order=21 bucket_order=0 + [ 3.241224] io scheduler mq-deadline registered + [ 3.241269] io scheduler kyber registered + [ 3.242143] sifive_gpio 10060000.gpio: SiFive GPIO chip registered 16 GPIOs + [ 3.242357] pwm-sifivem 10020000.pwm: Unable to find controller clock + [ 3.242439] pwm-sifivem 10021000.pwm: Unable to find controller clock + [ 3.243228] xilinx-pcie 2000000000.pci: PCIe Link is DOWN + [ 3.243289] xilinx-pcie 2000000000.pci: host bridge /soc/pci@2000000000 ranges: + [ 3.243360] xilinx-pcie 2000000000.pci: No bus range found for /soc/pci@2000000000, using [bus 00-ff] + [ 3.243447] xilinx-pcie 2000000000.pci: MEM 0x40000000..0x5fffffff -> 0x40000000 + [ 3.243591] xilinx-pcie 2000000000.pci: PCI host bridge to bus 0000:00 + [ 3.243636] pci_bus 0000:00: root bus resource [bus 00-ff] + [ 3.243676] pci_bus 0000:00: root bus resource [mem 0x40000000-0x5fffffff] + [ 3.276547] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled + [ 3.277689] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 39, base_baud = 0) is a SiFive UART v0 + [ 3.786963] printk: console [ttySIF0] enabled + [ 3.791504] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 40, base_baud = 0) is a SiFive UART v0 + [ 3.801251] sifive_spi 10040000.spi: mapped; irq=41, cs=1 + [ 3.806362] m25p80 spi0.0: unrecognized JEDEC id bytes: 9d, 70, 19 + [ 3.812084] m25p80: probe of spi0.0 failed with error -2 + [ 3.817453] sifive_spi 10041000.spi: mapped; irq=42, cs=4 + [ 3.823027] sifive_spi 10050000.spi: mapped; irq=43, cs=1 + [ 3.828604] libphy: Fixed MDIO Bus: probed + [ 3.832623] macb: GEM doesn't support hardware ptp. + [ 3.837196] libphy: MACB_mii_bus: probed + [ 4.041156] Microsemi VSC8541 SyncE 10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL) + [ 4.055779] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 12 (70:b3:d5:92:f0:c2) + [ 4.065780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver + [ 4.072033] ehci-pci: EHCI PCI platform driver + [ 4.076521] usbcore: registered new interface driver usb-storage + [ 4.082843] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) + [ 4.127465] mmc_spi spi2.0: SD/MMC host mmc0, no DMA, no WP, no poweroff + [ 4.133645] usbcore: registered new interface driver usbhid + [ 4.138980] usbhid: USB HID core driver + [ 4.143017] NET: Registered protocol family 17 + [ 4.147885] pwm-sifivem 10020000.pwm: SiFive PWM chip registered 4 PWMs + [ 4.153945] pwm-sifivem 10021000.pwm: SiFive PWM chip registered 4 PWMs + [ 4.186407] Freeing unused kernel memory: 9380K + [ 4.190224] This architecture does not have kernel memory protection. + [ 4.196609] Run /init as init process + Starting logging: OK + Starting mdev... + [ 4.303785] mmc0: host does not support reading read-only switch, assuming write-enable + [ 4.311109] mmc0: new SDHC card on SPI + [ 4.317103] mmcblk0: mmc0:0000 SS08G 7.40 GiB + [ 4.386471] mmcblk0: p1 p2 + sort: /sys/devices/platform/Fixed: No such file or directory + modprobe: can't change directory to '/lib/modules': No such file or directory + Initializing random[ 4.759075] random: dd: uninitialized urandom read (512 bytes read) + number generator... done. + Starting network... + udhcpc (v1.24.2) started + Sending discover... + Sending discover... + [ 7.927510] macb 10090000.ethernet eth0: link up (1000/Full) + Sending discover... + Sending select for 10.196.157.190... + Lease of 10.196.157.190 obtained, lease time 499743 + deleting routers + adding dns 10.86.1.1 + adding dns 10.86.2.1 + /etc/init.d/S50dropbear + Starting dropbear sshd: [ 12.772393] random: dropbear: uninitialized urandom read (32 bytes read) + OK + + Welcome to Buildroot + buildroot login: -- 2.25.1