From a3b5684fc1d4f3aabdf68dcf6c577f6dd24d2b2d Mon Sep 17 00:00:00 2001 From: Andy Polyakov Date: Mon, 6 Feb 2017 08:58:34 +0100 Subject: [PATCH] perlasm/x86_64-xlate.pl: recognize DWARF CFI directives. CFI directives annotate instructions that are significant for stack unwinding procedure. In addition to directives recognized by GNU assembler this module implements three synthetic ones: - .cfi_push annotates push instructions in prologue and translates to .cfi_adjust_cfa_offset (if needed) and .cfi_offset; - .cfi_pop annotates pop instructions in epilogue and translates to .cfi_adjust_cfs_offset (if needed) and .cfi_restore; - .cfi_cfa_expression encodes DW_CFA_def_cfa_expression and passes it to .cfi_escape as byte vector; CFA expression syntax is made up mix of DWARF operator suffixes [subset of] and references to registers with optional bias. Following example describes offloaded original stack pointer at specific offset from current stack pointer: .cfi_cfa_expression %rsp+40,deref,+8 Final +8 has everything to do with the fact that CFA, Canonical Frame Address, is reference to top of caller's stack, and on x86_64 call to subroutine pushes 8-byte return address. Triggered by request from Adam Langley. Reviewed-by: Rich Salz --- crypto/perlasm/x86_64-xlate.pl | 237 +++++++++++++++++++++++++++++++++ 1 file changed, 237 insertions(+) diff --git a/crypto/perlasm/x86_64-xlate.pl b/crypto/perlasm/x86_64-xlate.pl index afbe5e141f..09d293a446 100755 --- a/crypto/perlasm/x86_64-xlate.pl +++ b/crypto/perlasm/x86_64-xlate.pl @@ -465,6 +465,240 @@ my %globals; } } } +{ package cfi_directive; + # CFI directives annotate instructions that are significant for + # stack unwinding procedure compliant with DWARF specification, + # see http://dwarfstd.org/. Besides naturally expected for this + # script platform-specific filtering function, this module adds + # three auxiliary synthetic directives not recognized by [GNU] + # assembler: + # + # - .cfi_push to annotate push instructions in prologue, which + # translates to .cfi_adjust_cfa_offset (if needed) and + # .cfi_offset; + # - .cfi_pop to annotate pop instructions in epilogue, which + # translates to .cfi_adjust_cfa_offset (if needed) and + # .cfi_restore; + # - [and most notably] .cfi_cfa_expression which encodes + # DW_CFA_def_cfa_expression and passes it to .cfi_escape as + # byte vector; + # + # CFA expressions were introduced in DWARF specification version + # 3 and describe how to deduce CFA, Canonical Frame Address. This + # becomes handy if your stack frame is variable and you can't + # spare register for [previous] frame pointer. Suggested directive + # syntax is made-up mix of DWARF operator suffixes [subset of] + # and references to registers with optional bias. Following example + # describes offloaded *original* stack pointer at specific offset + # from *current* stack pointer: + # + # .cfi_cfa_expression %rsp+40,deref,+8 + # + # Final +8 has everything to do with the fact that CFA is defined + # as reference to top of caller's stack, and on x86_64 call to + # subroutine pushes 8-byte return address. In other words original + # stack pointer upon entry to a subroutine is 8 bytes off from CFA. + + # Below constants are taken from "DWARF Expressions" section of the + # DWARF specification, section is numbered 7.7 in versions 3 and 4. + my %DW_OP_simple = ( # no-arg operators, mapped directly + deref => 0x06, dup => 0x12, + drop => 0x13, over => 0x14, + pick => 0x15, swap => 0x16, + rot => 0x17, xderef => 0x18, + + abs => 0x19, and => 0x1a, + div => 0x1b, minus => 0x1c, + mod => 0x1d, mul => 0x1e, + neg => 0x1f, not => 0x20, + or => 0x21, plus => 0x22, + shl => 0x24, shr => 0x25, + shra => 0x26, xor => 0x27, + ); + + my %DW_OP_complex = ( # used in specific subroutines + constu => 0x10, # uleb128 + consts => 0x11, # sleb128 + plus_uconst => 0x23, # uleb128 + lit0 => 0x30, # add 0-31 to opcode + reg0 => 0x50, # add 0-31 to opcode + breg0 => 0x70, # add 0-31 to opcole, sleb128 + regx => 0x90, # uleb28 + fbreg => 0x91, # sleb128 + bregx => 0x92, # uleb128, sleb128 + piece => 0x93, # uleb128 + ); + + # Following constants are defined in x86_64 ABI supplement, for + # example avaiable at https://www.uclibc.org/docs/psABI-x86_64.pdf, + # see section 3.7 "Stack Unwind Algorithm". + my %DW_reg_idx = ( + "%rax"=>0, "%rdx"=>1, "%rcx"=>2, "%rbx"=>3, + "%rsi"=>4, "%rdi"=>5, "%rbp"=>6, "%rsp"=>7, + "%r8" =>8, "%r9" =>9, "%r10"=>10, "%r11"=>11, + "%r12"=>12, "%r13"=>13, "%r14"=>14, "%r15"=>15 + ); + + my ($cfa_reg, $cfa_rsp); + + # [us]leb128 format is variable-length integer representation base + # 2^128, with most significant bit of each byte being 0 denoting + # *last* most significat digit. See "Variable Length Data" in the + # DWARF specification, numbered 7.6 at least in versions 3 and 4. + sub sleb128 { + use integer; # get right shift extend sign + + my $val = shift; + my $sign = ($val < 0) ? -1 : 0; + my @ret = (); + + while(1) { + push @ret, $val&0x7f; + + # see if remaining bits are same and equal to most + # significant bit of the current digit, if so, it's + # last digit... + last if (($val>>6) == $sign); + + @ret[-1] |= 0x80; + $val >>= 7; + } + + return @ret; + } + sub uleb128 { + my $val = shift; + my @ret = (); + + while(1) { + push @ret, $val&0x7f; + + # see if it's last significant digit... + last if (($val >>= 7) == 0); + + @ret[-1] |= 0x80; + } + + return @ret; + } + sub const { + my $val = shift; + + if ($val >= 0 && $val < 32) { + return ($DW_OP_complex{lit0}+$val); + } + return ($DW_OP_complex{consts}, sleb128($val)); + } + sub reg { + my $val = shift; + + return if ($val !~ m/^(%r\w+)(?:([\+\-])((?:0x)?[0-9a-f]+))?/); + + my $reg = $DW_reg_idx{$1}; + my $off = eval ("0 $2 $3"); + + return (($DW_OP_complex{breg0} + $reg), sleb128($off)); + # Yes, we use DW_OP_bregX+0 to push register value and not + # DW_OP_regX, because latter would require even DW_OP_piece, + # which would be a waste under the circumstances. If you have + # to use DWP_OP_reg, use "regx:N"... + } + sub cfa_expression { + my $line = shift; + my @ret; + + foreach my $token (split(/,\s*/,$line)) { + if ($token =~ /^%r/) { + push @ret,reg($token); + } elsif ($token =~ /(\w+):(\-?(?:0x)?[0-9a-f]+)(U?)/i) { + my $i = 1*eval($2); + push @ret,$DW_OP_complex{$1}, ($3 ? uleb128($i) : sleb128($i)); + } elsif (my $i = 1*eval($token) or $token eq "0") { + if ($token =~ /^\+/) { + push @ret,$DW_OP_complex{plus_uconst},uleb128($i); + } else { + push @ret,const($i); + } + } else { + push @ret,$DW_OP_simple{$token}; + } + } + + # Finally we return DW_CFA_def_cfa_expression, 15, followed by + # length of the expression and of course the expression itself. + return (15,scalar(@ret),@ret); + } + sub re { + my ($class, $line) = @_; + my $self = {}; + my $ret; + + if ($$line =~ s/^\s*\.cfi_(\w+)\s+//) { + bless $self,$class; + $ret = $self; + undef $self->{value}; + my $dir = $1; + + SWITCH: for ($dir) { + # What is $cfa_rsp? Effectively it's difference between %rsp + # value and current CFA, Canonical Frame Address, which is + # why it starts with -8. Recall that CFA is top of caller's + # stack... + /startproc/ && do { ($cfa_reg, $cfa_rsp) = ("%rsp", -8); last; }; + /endproc/ && do { ($cfa_reg, $cfa_rsp) = ("%rsp", 0); last; }; + /def_cfa_register/ + && do { $cfa_reg = $$line; last; }; + /def_cfa_offset/ + && do { $cfa_rsp = -1*eval($$line) if ($cfa_reg eq "%rsp"); + last; + }; + /adjust_cfa_offset/ + && do { $cfa_rsp -= 1*eval($$line) if ($cfa_reg eq "%rsp"); + last; + }; + /def_cfa/ && do { if ($$line =~ /(%r\w+)\s*,\s*(\.+)/) { + $cfa_reg = $1; + $cfa_rsp = -1*eval($2) if ($cfa_reg eq "%rsp"); + } + last; + }; + /push/ && do { $dir = undef; + $cfa_rsp -= 8; + if ($cfa_reg eq "%rsp") { + $self->{value} = ".cfi_adjust_cfa_offset\t8\n"; + } + $self->{value} .= ".cfi_offset\t$$line,$cfa_rsp"; + last; + }; + /pop/ && do { $dir = undef; + $cfa_rsp += 8; + if ($cfa_reg eq "%rsp") { + $self->{value} = ".cfi_adjust_cfa_offset\t-8\n"; + } + $self->{value} .= ".cfi_restore\t$$line"; + last; + }; + /cfa_expression/ + && do { $dir = undef; + $self->{value} = ".cfi_escape\t" . + join(",", map(sprintf("0x%02x", $_), + cfa_expression($$line))); + last; + }; + } + + $self->{value} = ".cfi_$dir\t$$line" if ($dir); + + $$line = ""; + } + + return $ret; + } + sub out { + my $self = shift; + return ($elf ? $self->{value} : undef); + } +} { package directive; # pick up directives, which start with . sub re { my ($class, $line) = @_; @@ -472,6 +706,9 @@ my %globals; my $ret; my $dir; + # chain-call to cfi_directive + $ret = cfi_directive->re($line) and return $ret; + if ($$line =~ /^\s*(\.\w+)/) { bless $self,$class; $dir = $1; -- 2.25.1