From a293db210333afc98d807cf1008e417fda7ff102 Mon Sep 17 00:00:00 2001 From: Chen Minqiang Date: Wed, 6 Mar 2019 19:04:26 +0800 Subject: [PATCH] ramips: hc5xxx: use switch trigger for leds netdev on eth0.2 can't show link status of wan port because eth0 is connected to builtin switch and is always link up. Use swconfig trigger instead. Signed-off-by: Chen Minqiang [redo commit message] Signed-off-by: Chuanhong Guo --- target/linux/ramips/base-files/etc/board.d/01_leds | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index d5ea201279..e54300dafb 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -204,7 +204,7 @@ hauppauge,broadway) set_wifi_led "$boardname:red:wps_active" ;; hiwifi,hc5661) - ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01" set_wifi_led "$boardname:blue:wlan2g" ;; hiwifi,hc5661a|\ @@ -212,9 +212,13 @@ hiwifi,hc5761a|\ xzwifi,creativebox-v1) ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10" ;; -hiwifi,hc5761|\ +hiwifi,hc5761) + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01" + ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0" + ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1" + ;; hiwifi,hc5861) - ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20" ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0" ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1" ;; -- 2.25.1