From a1702746dfd985f69c1c32ae9618f066443e43a9 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 14 Dec 2018 16:28:30 -0600 Subject: [PATCH] ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy Signed-off-by: Adam Ford [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini --- arch/arm/mach-omap2/omap3/Kconfig | 5 +++++ arch/arm/mach-omap2/omap3/clock.c | 10 +++++----- include/configs/omap3_igep00x0.h | 4 ---- 3 files changed, 10 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index e0d02fb4e5..0286b0daa3 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -3,18 +3,23 @@ if OMAP34XX # We only enable the clocks for the GPIO banks that a given board requies. config OMAP3_GPIO_2 bool + default y if CMD_GPIO config OMAP3_GPIO_3 bool + default y if CMD_GPIO config OMAP3_GPIO_4 bool + default y if CMD_GPIO config OMAP3_GPIO_5 bool + default y if CMD_GPIO config OMAP3_GPIO_6 bool + default y if CMD_GPIO choice prompt "OMAP3 board select" diff --git a/arch/arm/mach-omap2/omap3/clock.c b/arch/arm/mach-omap2/omap3/clock.c index 9a03bfa9d3..cb9e91ebc3 100644 --- a/arch/arm/mach-omap2/omap3/clock.c +++ b/arch/arm/mach-omap2/omap3/clock.c @@ -750,23 +750,23 @@ void per_clocks_enable(void) setbits_le32(&prcm_base->iclken_per, 0x00000800); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_2) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_2) setbits_le32(&prcm_base->fclken_per, 0x00002000); setbits_le32(&prcm_base->iclken_per, 0x00002000); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_3) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_3) setbits_le32(&prcm_base->fclken_per, 0x00004000); setbits_le32(&prcm_base->iclken_per, 0x00004000); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_4) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_4) setbits_le32(&prcm_base->fclken_per, 0x00008000); setbits_le32(&prcm_base->iclken_per, 0x00008000); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_5) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_5) setbits_le32(&prcm_base->fclken_per, 0x00010000); setbits_le32(&prcm_base->iclken_per, 0x00010000); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_6) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_6) setbits_le32(&prcm_base->fclken_per, 0x00020000); setbits_le32(&prcm_base->iclken_per, 0x00020000); #endif diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index b9d6569752..775374cf28 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -20,10 +20,6 @@ #define CONFIG_REVISION_TAG 1 -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO bank 2 */ -#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO bank 4 */ - /* TPS65950 */ #define PBIASLITEVMODE1 (1 << 8) -- 2.25.1