From a0dd99d51efa55fe023e19c97ead92683725eb11 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 14 Jan 2008 10:05:05 +0100 Subject: [PATCH] ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit Now that bit 29 is the USB PHY reset bit, update the Kilauea port to remove the USB PHY reset after powerup. The CPLD will keep the USB PHY in reset (active low) until the bit is set to 1 in board_early_init_f(). Signed-off-by: Stefan Roese --- board/amcc/kilauea/kilauea.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c index 2ee896abd9..37ef06ef2a 100644 --- a/board/amcc/kilauea/kilauea.c +++ b/board/amcc/kilauea/kilauea.c @@ -192,13 +192,6 @@ int board_early_init_f (void) */ mtsdr(SDR0_SRST, 0); - /* - * Configure FPGA register with PCIe reset - */ - out_be32((void *)CFG_FPGA_BASE, 0xff570cc0); /* assert PCIe reset */ - mdelay(50); - out_be32((void *)CFG_FPGA_BASE, 0xff570cc3); /* deassert PCIe reset */ - /* Configure 405EX for NAND usage */ val = SDR0_CUST0_MUX_NDFC_SEL | SDR0_CUST0_NDFC_ENABLE | @@ -214,6 +207,13 @@ int board_early_init_f (void) val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ; mtsdr(SDR0_PFC1, val); + /* + * Configure FPGA register with PCIe reset + */ + out_be32((void *)CFG_FPGA_BASE, 0xff570cc4); /* assert PCIe reset */ + mdelay(50); + out_be32((void *)CFG_FPGA_BASE, 0xff570cc7); /* deassert PCIe reset */ + return 0; } -- 2.25.1