From a0183b2f75a772366336671a818707df3dc04e79 Mon Sep 17 00:00:00 2001 From: Iordan Iordanov Date: Sat, 9 Mar 2013 22:52:53 +0000 Subject: [PATCH] - added beep.gsm - now escaping special characters in pbx-asterisk - changed location of voicemail temp stuff and log file - changed pbx-send-voicemail to use base64 instead of uuencode - added many missing dependencies - now allowing ip addresses as well as hostnames for external host - constrained # seconds to ring to positive integers - specifying externrefresh in sip.conf template - fixed voicemail (sending recordings, recording new greeting, instructions) - Implemented callback --- .../luasrc/model/cbi/pbx-voicemail.lua | 15 +- .../root/etc/pbx-voicemail/pbx-move-greeting | 6 + .../root/etc/pbx-voicemail/pbx-send-voicemail | 10 +- .../luasrc/model/cbi/pbx-advanced.lua | 16 +- .../luci-pbx/luasrc/model/cbi/pbx-calls.lua | 85 +++++++++- .../luci-pbx/root/etc/init.d/pbx-asterisk | 152 +++++++++++++++++- .../root/etc/pbx-asterisk/delayedcallback | 18 +++ .../etc/pbx-asterisk/extensions.conf.TEMPLATE | 1 + .../extensions_callback-check.conf.TEMPLATE | 1 + ...nsions_callback-check_footer.conf.TEMPLATE | 2 + ...nsions_callback-check_header.conf.TEMPLATE | 3 + .../extensions_callback_gtalk.conf.TEMPLATE | 4 + .../extensions_callback_header.conf.TEMPLATE | 1 + .../extensions_callback_sip.conf.TEMPLATE | 4 + .../extensions_default.conf.TEMPLATE | 2 + .../extensions_disa-nopin.conf.TEMPLATE | 5 + ...sions_incoming_context_gtalk.conf.TEMPLATE | 2 + ...ensions_incoming_context_sip.conf.TEMPLATE | 2 + ...extensions_voicemail_enabled.conf.TEMPLATE | 28 +++- .../root/etc/pbx-asterisk/sip.conf.TEMPLATE | 2 + .../pbx-asterisk/sounds/auth-incorrect.gsm | Bin 0 -> 7458 bytes .../root/etc/pbx-asterisk/sounds/beep.gsm | Bin 0 -> 726 bytes .../etc/pbx-asterisk/sounds/vm-goodbye.gsm | Bin 0 -> 1683 bytes contrib/package/luci/Makefile | 10 +- 24 files changed, 326 insertions(+), 43 deletions(-) create mode 100755 applications/luci-pbx-voicemail/root/etc/pbx-voicemail/pbx-move-greeting create mode 100755 applications/luci-pbx/root/etc/pbx-asterisk/delayedcallback create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check.conf.TEMPLATE create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check_footer.conf.TEMPLATE create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check_header.conf.TEMPLATE create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_gtalk.conf.TEMPLATE create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_header.conf.TEMPLATE create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_sip.conf.TEMPLATE create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/extensions_disa-nopin.conf.TEMPLATE create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/sounds/auth-incorrect.gsm create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/sounds/beep.gsm create mode 100644 applications/luci-pbx/root/etc/pbx-asterisk/sounds/vm-goodbye.gsm diff --git a/applications/luci-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua b/applications/luci-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua index 62320609a..9ff2ed97f 100644 --- a/applications/luci-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua +++ b/applications/luci-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua @@ -64,20 +64,23 @@ savepath = s:option(Value, "global_save_path", translate("Local Storage Director option only if you know what you are doing.")) savepath.optional = true -if nixio.fs.access("/etc/pbx-voicemail/greeting.WAV") then +if nixio.fs.access("/etc/pbx-voicemail/recordings/greeting.gsm") then m1 = s:option(DummyValue, "_m1") m1:depends("enabled", "yes") m1.default = "NOTE: Found a voicemail greeting. To check or change your voicemail greeting, dial *789 \ - and the system will play your current message. You have 5 seconds to hangup, otherwise a \ - new recording will begin and your old message will be overwritten. Hang up or press # to \ - stop recording. When you press #, the system will play back the new recording." + and the system will play back your current greeting. After that, a long beep will sound and \ + you can press * in order to record a new message. Hang up to avoid recording a message. \ + If you press *, a second long beep will sound, and you can record a new greeting. \ + Hang up or press # to stop recording. When # is pressed the system will play back the \ + new greeting." else m1 = s:option(DummyValue, "_m1") m1:depends("enabled", "yes") m1.default = "WARNING: Could not find voicemail greeting. Callers will hear only a beep before \ - recording starts. To record a greeting, dial *789 and record a greeting after the beep. \ + recording starts. To record a greeting, dial *789, and press * after the long beep. \ + If you press *, a second long beep will sound, and you can record a new greeting. \ Hang up or press # to stop recording. When # is pressed the system will play back the \ - recording." + new greeting." end diff --git a/applications/luci-pbx-voicemail/root/etc/pbx-voicemail/pbx-move-greeting b/applications/luci-pbx-voicemail/root/etc/pbx-voicemail/pbx-move-greeting new file mode 100755 index 000000000..21fe69414 --- /dev/null +++ b/applications/luci-pbx-voicemail/root/etc/pbx-voicemail/pbx-move-greeting @@ -0,0 +1,6 @@ +#!/bin/sh + +if [ -f "/tmp/voicemail/greeting.gsm" ] +then + mv /tmp/voicemail/greeting.gsm /etc/pbx-voicemail/recordings/ +fi diff --git a/applications/luci-pbx-voicemail/root/etc/pbx-voicemail/pbx-send-voicemail b/applications/luci-pbx-voicemail/root/etc/pbx-voicemail/pbx-send-voicemail index adfded231..ba639d01a 100755 --- a/applications/luci-pbx-voicemail/root/etc/pbx-voicemail/pbx-send-voicemail +++ b/applications/luci-pbx-voicemail/root/etc/pbx-voicemail/pbx-send-voicemail @@ -19,10 +19,10 @@ # # # Thanks to http://www.zedwood.com for providing an excellent example of how to -# properly assemble an email message with a uuencoded attachment. +# properly assemble an email message with a base64 encoded attachment. # -LOGFILE=/tmp/last_sent_voicemail.log +LOGFILE=/tmp/voicemail/last_sent_voicemail.log # Redirect standard error and standard output to a log file. rm -f "$LOGFILE" @@ -58,8 +58,8 @@ REPLY="do-not-reply@pbx" SUBJECT="Voicemail from $CALLERID, $DATE, $TIME" MSGBODY="$CALLERID has left voicemail for you on $DATE at $TIME." MIMETYPE="audio/wav" -TMP1="/tmp/tmpemail1.$$"; -TMP2="/tmp/tmpemail2.$$"; +TMP1="/tmp/voicemail/tmpemail1.$$"; +TMP2="/tmp/voicemail/tmpemail2.$$"; BOUNDARY="`date +%s | md5sum | awk '{print $1}'`" FILENAME="voicemail-$DATE-$TIME.WAV" @@ -97,7 +97,7 @@ append_to_file $TMP2 "" # Cat everything together and pass to msmtprc to send out. ( cat $TMP1 - cat "$ATTACHMENT" | uuencode --base64 /dev/stdout | sed -e '1,1d' -e '$d' + cat "$ATTACHMENT" | base64 cat $TMP2 ) | msmtp -t -C /etc/pbx-msmtprc # Clean up email temp files. diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua index 4f1034019..5d4f135c5 100644 --- a/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua +++ b/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua @@ -250,6 +250,7 @@ s:tab("qos", translate("QoS Settings"), ringtime = s:taboption("general", Value, "ringtime", translate("Number of Seconds to Ring"), translate("Set the number of seconds to ring users upon incoming calls before hanging up \ or going to voicemail, if the voicemail is installed and enabled.")) +ringtime.datatype = "port" ringtime.default = 30 ua = s:taboption("general", Value, "useragent", translate("User Agent String"), @@ -259,17 +260,18 @@ ua = s:taboption("general", Value, "useragent", translate("User Agent String"), ua.default = appname h = s:taboption("remote_usage", Value, "externhost", translate("Domain/IP Address/Dynamic Domain"), - translate("You can enter your domain name, external IP address, or dynamic domain name here \ - Please keep in mind that if your IP address is dynamic and it changes your configuration \ - will become invalid. Hence, it's recommended to set up Dynamic DNS in this case.")) -h.datatype = "hostname" + translate("You can enter your domain name, external IP address, or dynamic domain name here. \ + The best thing to input is a static IP address. If your IP address is dynamic and it changes, \ + your configuration will become invalid. Hence, it's recommended to set up Dynamic DNS in this case. \ + and enter your Dynamic DNS hostname here. You can configure Dynamic DNS with the luci-app-ddns package.")) +h.datatype = "host" p = s:taboption("remote_usage", Value, "bindport", translate("External SIP Port"), translate("Pick a random port number between 6500 and 9500 for the service to listen on. \ Do not pick the standard 5060, because it is often subject to brute-force attacks. \ - When finished, (1) click \"Save and Apply\", and (2) click the \"Restart VoIP Service\" \ - button above. Finally, (3) look in the \"SIP Device/Softphone Accounts\" section for \ - updated Server and Port settings for your SIP Devices/Softphones.")) + When finished, (1) click \"Save and Apply\", and (2) look in the \ + \"SIP Device/Softphone Accounts\" section for updated Server and Port settings \ + for your SIP Devices/Softphones.")) p.datatype = "port" p = s:taboption("remote_usage", Value, "rtpstart", translate("RTP Port Range Start"), diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua index d4f21cdcc..ca373d63a 100644 --- a/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua +++ b/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua @@ -150,7 +150,7 @@ for k,v in pairs(validoutaccounts) do patterns = s:option(DynamicList, k, v) -- If the saved field is empty, we return a string - -- telling the user that this account would dial any exten. + -- telling the user that this provider would dial any exten. function patterns.cfgvalue(self, section) value = self.map:get(section, self.option) @@ -200,8 +200,8 @@ s.anonymous = true for k,v in pairs(validinaccounts) do users = s:option(DynamicList, k, v) - -- If the saved field is empty, we return a string - -- telling the user that this account would dial any exten. + -- If the saved field is empty, we return a string telling the user that + -- this provider would ring all users configured for incoming calls. function users.cfgvalue(self, section) value = self.map:get(section, self.option) @@ -253,8 +253,8 @@ s.anonymous = true for k,v in pairs(validoutusers) do providers = s:option(DynamicList, k, k) - -- If the saved field is empty, we return a string - -- telling the user that this account would dial any exten. + -- If the saved field is empty, we return a string telling the user + -- that this user uses all providers enavled for outgoing calls. function providers.cfgvalue(self, section) value = self.map:get(section, self.option) @@ -289,11 +289,64 @@ end ---------------------------------------------------------------------------------------------------- s = m:section(TypedSection, "callthrough_numbers", translate("Call-through Numbers"), translate("Designate numbers that are allowed to call through this system and which user's \ - privileges it will have.")) + privileges they will have.")) +s.anonymous = true +s.addremove = true + +num = s:option(DynamicList, "callthrough_number_list", translate("Call-through Numbers"), + translate("Specify numbers individually here. Press enter to add more numbers. \ + You will have to experiment with what country and area codes you need to add \ + to the number.")) +num.datatype = "uinteger" + +p = s:option(ListValue, "enabled", translate("Enabled")) +p:value("yes", translate("Yes")) +p:value("no", translate("No")) +p.default = "yes" + +user = s:option(Value, "defaultuser", translate("User Name"), + translate("The number(s) specified above will be able to dial out with this user's providers. \ + Invalid usernames, including users not enabled for outgoing calls, are dropped silently. \ + Please verify that the entry was accepted.")) +function user.write(self, section, value) + trimuser = luci.util.trim(value) + if allvalidusers[trimuser] == true then + Value.write(self, section, trimuser) + end +end + +pwd = s:option(Value, "pin", translate("PIN"), + translate("Your PIN disappears when saved for your protection. It will be changed \ + only when you enter a value different from the saved one. Leaving the PIN \ + empty is possible, but please beware of the security implications.")) +pwd.password = true +pwd.rmempty = false + +-- We skip reading off the saved value and return nothing. +function pwd.cfgvalue(self, section) + return "" +end + +-- We check the entered value against the saved one, and only write if the entered value is +-- something other than the empty string, and it differes from the saved value. +function pwd.write(self, section, value) + local orig_pwd = m:get(section, self.option) + if value and #value > 0 and orig_pwd ~= value then + Value.write(self, section, value) + end +end + +---------------------------------------------------------------------------------------------------- +s = m:section(TypedSection, "callback_numbers", translate("Call-back Numbers"), + translate("Designate numbers to whom the system will hang up and call back, which provider will \ + be used to call them, and which user's privileges will be granted to them.")) s.anonymous = true s.addremove = true -num = s:option(DynamicList, "callthrough_number_list", translate("Call-through Numbers")) +num = s:option(DynamicList, "callback_number_list", translate("Call-back Numbers"), + translate("Specify numbers individually here. Press enter to add more numbers. \ + You will have to experiment with what country and area codes you need to add \ + to the number.")) num.datatype = "uinteger" p = s:option(ListValue, "enabled", translate("Enabled")) @@ -301,6 +354,13 @@ p:value("yes", translate("Yes")) p:value("no", translate("No")) p.default = "yes" +delay = s:option(Value, "callback_hangup_delay", translate("Hang-up Delay"), + translate("How long to wait before hanging up. If the provider you use to dial automatically forwards \ + to voicemail, you can set this value to a delay that will allow you to hang up before your call gets \ + forwarded and you get billed for it.")) +delay.datatype = "uinteger" +delay.default = 0 + user = s:option(Value, "defaultuser", translate("User Name"), translate("The number(s) specified above will be able to dial out with this user's providers. \ Invalid usernames, including users not enabled for outgoing calls, are dropped silently. \ @@ -333,6 +393,17 @@ function pwd.write(self, section, value) end end +provider = s:option(Value, "callback_provider", translate("Call-back Provider"), + translate("Enter a VoIP provider to use for call-back in the format username@some.host.name, as listed in \ + \"Outgoing Calls\" above. It's easiest to copy and paste the providers from above. Invalid entries, including \ + providers not enabled for outgoing calls, will be rejected silently.")) +function provider.write(self, section, value) + cooked = string.gsub(luci.util.trim(value), "%W", "_") + if validoutaccounts[cooked] ~= nil then + Value.write(self, section, value) + end +end + ---------------------------------------------------------------------------------------------------- s = m:section(NamedSection, "blacklisting", "call_routing", translate("Blacklisted Numbers"), translate("Enter phone numbers that you want to decline calls from automatically. \ diff --git a/applications/luci-pbx/root/etc/init.d/pbx-asterisk b/applications/luci-pbx/root/etc/init.d/pbx-asterisk index 99663a971..e05ae11cd 100755 --- a/applications/luci-pbx/root/etc/init.d/pbx-asterisk +++ b/applications/luci-pbx/root/etc/init.d/pbx-asterisk @@ -54,6 +54,14 @@ TMPL_EXTCTHRUCHECK=$TEMPLATEDIR/extensions_disa-check.conf.TEMPLATE TMPL_EXTCTHRUCHECKFTR=$TEMPLATEDIR/extensions_disa-check_footer.conf.TEMPLATE TMPL_EXTCTHRUHDR=$TEMPLATEDIR/extensions_disa_header.conf.TEMPLATE TMPL_EXTCTHRU=$TEMPLATEDIR/extensions_disa.conf.TEMPLATE +TMPL_EXTCTHRUNOPIN=$TEMPLATEDIR/extensions_disa-nopin.conf.TEMPLATE + +TMPL_EXTCBACKCHECKHDR=$TEMPLATEDIR/extensions_callback-check_header.conf.TEMPLATE +TMPL_EXTCBACKCHECK=$TEMPLATEDIR/extensions_callback-check.conf.TEMPLATE +TMPL_EXTCBACKCHECKFTR=$TEMPLATEDIR/extensions_callback-check_footer.conf.TEMPLATE +TMPL_EXTCBACKHDR=$TEMPLATEDIR/extensions_callback_header.conf.TEMPLATE +TMPL_EXTCBACKSIP=$TEMPLATEDIR/extensions_callback_sip.conf.TEMPLATE +TMPL_EXTCBACKGTALK=$TEMPLATEDIR/extensions_callback_gtalk.conf.TEMPLATE TMPL_EXTENSIONS=$TEMPLATEDIR/extensions.conf.TEMPLATE @@ -114,6 +122,18 @@ localusers_can_dial="" # which will be used to dial out by default (whose outgoing contexts will # be included in users' contexts by default. outbound_providers="" +sip_outbound_providers="" +gtalk_outbound_providers="" + +# Function which escapes non-alpha-numeric characters in a string +escape_non_alpha() { + echo $@ | sed 's/\([^a-zA-Z0-9]\)/\\\1/g' +} + +# Function which replaces non-alpha-numeric characters with an underscore +sub_underscore_for_non_alpha() { + echo $@ | sed 's/[^a-zA-Z0-9]/_/g' +} # Copies the template files which we don't edit. copy_unedited_templates_over() @@ -149,6 +169,7 @@ pbx_create_extensions_config() rm -f $WORKDIR/outextgtalk.TMP mv $WORKDIR/blacklist.TMP $WORKDIR/extensions_blacklist.conf mv $WORKDIR/userext.TMP $WORKDIR/extensions_user.conf + cp $TMPL_EXTCTHRUHDR $WORKDIR/extensions_callthrough.conf cat $WORKDIR/callthrough.TMP >> $WORKDIR/extensions_callthrough.conf 2>/dev/null rm -f $WORKDIR/callthrough.TMP @@ -156,6 +177,15 @@ pbx_create_extensions_config() cat $WORKDIR/callthroughcheck.TMP >> $WORKDIR/extensions_callthrough.conf 2>/dev/null rm -f $WORKDIR/callthroughcheck.TMP cat $TMPL_EXTCTHRUCHECKFTR >> $WORKDIR/extensions_callthrough.conf 2>/dev/null + + cp $TMPL_EXTCBACKHDR $WORKDIR/extensions_callback.conf + cat $WORKDIR/callback.TMP >> $WORKDIR/extensions_callback.conf 2>/dev/null + rm -f $WORKDIR/callback.TMP + cat $TMPL_EXTCBACKCHECKHDR >> $WORKDIR/extensions_callback.conf 2>/dev/null + cat $WORKDIR/callbackcheck.TMP >> $WORKDIR/extensions_callback.conf 2>/dev/null + rm -f $WORKDIR/callbackcheck.TMP + cat $TMPL_EXTCBACKCHECKFTR >> $WORKDIR/extensions_callback.conf 2>/dev/null + rm -f $WORKDIR/outext-*.TMP rm -f $WORKDIR/localext.TMP sed "s/|LOCALUSERS|/$localusers_to_ring/g" $TMPL_EXTDEFAULT \ @@ -246,13 +276,17 @@ pbx_add_user() { local fullname local defaultuser + local rawdefaultuser local secret local ring local can_call config_get fullname $1 fullname - config_get defaultuser $1 defaultuser + fullname=`escape_non_alpha $fullname` + config_get rawdefaultuser $1 defaultuser + defaultuser=`escape_non_alpha $rawdefaultuser` config_get secret $1 secret + secret=`escape_non_alpha $secret` config_get ring $1 ring config_get can_call $1 can_call @@ -263,7 +297,7 @@ pbx_add_user() if [ "$can_call" = "yes" ] ; then # Add user to list of all users that are allowed to make calls. - localusers_can_dial="$localusers_can_dial $defaultuser" + localusers_can_dial="$localusers_can_dial $rawdefaultuser" sed -i "s/|CONTEXTNAME|/$defaultuser/g" $WORKDIR/sip_user.tmp else sed -i "s/|CONTEXTNAME|/$HANGUPCNTXT/g" $WORKDIR/sip_user.tmp @@ -307,13 +341,18 @@ pbx_add_jabber() local statusmessage config_get username $1 username + username=`escape_non_alpha $username` config_get secret $1 secret + secret=`escape_non_alpha $secret` + #TODO: Is this really necessary here? Numprefix is retrieved below. config_get numprefix $1 numprefix config_get register $1 register config_get make_outgoing_calls $1 make_outgoing_calls config_get name $1 name config_get status $1 status + status=`escape_non_alpha $status` config_get statusmessage $1 statusmessage + statusmessage=`escape_non_alpha $statusmessage` [ -z "$username" -o -z "$secret" ] && return @@ -338,7 +377,7 @@ pbx_add_jabber() # messes entered by users. set $users_to_ring users_to_ring="SIP\/$1" && shift - for u in $@ ; do users_to_ring=$users_to_ring\\\&SIP\\\/$u ; done + for u in $@ ; do u=`escape_non_alpha $u` ; users_to_ring=$users_to_ring\\\&SIP\\\/$u ; done fi # Now, we add this account to the gtalk incoming context. @@ -361,6 +400,7 @@ pbx_add_jabber() [ -z "$numprefix" ] && numprefix="X" for p in $numprefix ; do + p=`escape_non_alpha $p` sed "s/|NUMPREFIX|/$p/g" $TMPL_EXTOUTGTALK |\ sed "s/|NAME|/$name/g" >> $WORKDIR/outext-$name.TMP done @@ -371,6 +411,13 @@ pbx_add_jabber() else outbound_providers="$outbound_providers $name" fi + + # Add this provider to the list of enabled gtalk outbound providers. + if [ -z "$gtalk_outbound_providers" ] ; then + gtalk_outbound_providers="$name" + else + gtalk_outbound_providers="$gtalk_outbound_providers $name" + fi fi rm -f $WORKDIR/jabber.tmp @@ -394,11 +441,16 @@ pbx_add_peer() local outboundproxy config_get defaultuser $1 defaultuser + defaultuser=`escape_non_alpha $defaultuser` config_get secret $1 secret + secret=`escape_non_alpha $secret` config_get host $1 host + host=`escape_non_alpha $host` config_get port $1 port config_get outbountproxy $1 outboundproxy + outbountproxy=`escape_non_alpha $outbountproxy` config_get fromdomain $1 fromdomain + fromdomain=`escape_non_alpha $fromdomain` config_get register $1 register config_get numprefix $1 numprefix config_get make_outgoing_calls $1 make_outgoing_calls @@ -453,6 +505,7 @@ pbx_add_peer() # If no prefixes are specified, then we use "X" which matches any prefix. [ -z "$numprefix" ] && numprefix="X" for p in $numprefix ; do + p=`escape_non_alpha $p` sed "s/|NUMPREFIX|/$p/g" $TMPL_EXTOUTSIP |\ sed "s/|NAME|/$name/g" >> $WORKDIR/outext-$name.TMP done @@ -463,6 +516,13 @@ pbx_add_peer() else outbound_providers="$outbound_providers $name" fi + + # Add this provider to the list of enabled sip outbound providers. + if [ -z "$sip_outbound_providers" ] ; then + sip_outbound_providers="$name" + else + sip_outbound_providers="$sip_outbound_providers $name" + fi fi rm -f $WORKDIR/sip_peer.tmp @@ -477,6 +537,7 @@ pbx_create_user_contexts() local providers for u in $localusers_can_dial ; do + u=`escape_non_alpha $u` sed "s/|DEFAULTUSER|/$u/g" $TMPL_EXTUSERCNTXTHDR >> $WORKDIR/userext.TMP cat $WORKDIR/localext.TMP >> $WORKDIR/userext.TMP providers="`uci -q get ${MODULENAME}-calls.providers_user_can_use.$u`" @@ -504,6 +565,7 @@ pbx_add_blacklist() # to the context for a check against the list anyway. cp $TMPL_EXTBLKLISTHDR $WORKDIR/blacklist.TMP for n in $blacklist1 $blacklist2 ; do + n=`escape_non_alpha $n` sed "s/|BLACKLISTITEM|/$n/g" $TMPL_EXTBLKLIST >> $WORKDIR/blacklist.TMP done cat $TMPL_EXTBLKLISTFTR >> $WORKDIR/blacklist.TMP @@ -517,10 +579,13 @@ pbx_add_callthrough() local defaultuser local pin local enabled + local F config_get callthrough_number_list $1 callthrough_number_list config_get defaultuser $1 defaultuser + defaultuser=`escape_non_alpha $defaultuser` config_get pin $1 pin + pin=`escape_non_alpha $pin` config_get enabled $1 enabled [ "$enabled" = "no" ] && return @@ -529,12 +594,66 @@ pbx_add_callthrough() for callthrough_number in $callthrough_number_list ; do sed "s/|NUMBER|/$callthrough_number/g" $TMPL_EXTCTHRUCHECK >> $WORKDIR/callthroughcheck.TMP - sed "s/|NUMBER|/$callthrough_number/g" $TMPL_EXTCTHRU |\ - sed "s/|DEFAULTUSER|/$defaultuser/" |\ - sed "s/|PIN|/$pin/" >> $WORKDIR/callthrough.TMP + if [ -n "$pin" ] ; then F=$TMPL_EXTCTHRU ; else F=$TMPL_EXTCTHRUNOPIN ; fi + sed "s/|NUMBER|/$callthrough_number/g" $F |\ + sed "s/|DEFAULTUSER|/$defaultuser/" |\ + sed "s/|PIN|/$pin/" >> $WORKDIR/callthrough.TMP done } + +# Creates the callback context which allows specified numbers to get +# a callback into the PBX and dial out as the configured user. +pbx_add_callback() +{ + local callback_number_list + local defaultuser + local pin + local enabled + local callback_provider + local callback_hangup_delay + local FB + local FT + + config_get callback_number_list $1 callback_number_list + config_get defaultuser $1 defaultuser + defaultuser=`escape_non_alpha $defaultuser` + config_get pin $1 pin + pin=`escape_non_alpha $pin` + config_get enabled $1 enabled + config_get callback_provider $1 callback_provider + callback_provider=`sub_underscore_for_non_alpha $callback_provider` + config_get callback_hangup_delay $1 callback_hangup_delay + + [ "$enabled" = "no" ] && return + [ "$defaultuser" = "" ] && return + + # If the provider is a SIP provider, set the file to use to $TMPL_EXTCBACKSIP + # otherwise, set it to $TMPL_EXTCBACKGTALK + if echo $sip_outbound_providers | grep -q $callback_provider 2>/dev/null + then + FB=$TMPL_EXTCBACKSIP + else + FB=$TMPL_EXTCBACKGTALK + fi + + for callback_number in $callback_number_list ; do + sed "s/|NUMBER|/$callback_number/g" $TMPL_EXTCBACKCHECK >> $WORKDIR/callbackcheck.TMP + + sed "s/|NUMBER|/$callback_number/g" $FB |\ + sed "s/|CALLBACKPROVIDER|/$callback_provider/" |\ + sed "s/|CALLBACKHUPDELAY|/$callback_hangup_delay/" >> $WORKDIR/callback.TMP + + # Perhaps a bit confusingly, we create "callthrough" configuration for callback + # numbers, because we use the same DISA construct as for callthrough. + if [ -n "$pin" ] ; then FT=$TMPL_EXTCTHRU ; else FT=$TMPL_EXTCTHRUNOPIN ; fi + sed "s/|NUMBER|/$callback_number/g" $FT |\ + sed "s/|DEFAULTUSER|/$defaultuser/" |\ + sed "s/|PIN|/$pin/" >> $WORKDIR/callthrough.TMP + done +} + + # Creates sip.conf from its template. pbx_cook_sip_template() { @@ -543,6 +662,7 @@ pbx_cook_sip_template() local bindport config_get useragent advanced useragent + useragent=`escape_non_alpha $useragent` config_get externhost advanced externhost config_get bindport advanced bindport @@ -628,7 +748,9 @@ pbx_configure_voicemail() config_get smtp_server voicemail_smtp smtp_server config_get smtp_port voicemail_smtp smtp_port config_get smtp_user voicemail_smtp smtp_user + smtp_user=`escape_non_alpha $smtp_user` config_get smtp_password voicemail_smtp smtp_password + smtp_password=`escape_non_alpha $smtp_password` sed "s/|AUTH|/$smtp_auth/" $TMPL_MSMTPDEFAULT |\ sed "s/|TLS|/$smtp_tls/" > $WORKDIR/pbx-msmtprc @@ -644,12 +766,25 @@ pbx_configure_voicemail() cat $TMPL_MSMTPACCTDFLT >> $WORKDIR/pbx-msmtprc [ ! -f /etc/pbx-msmtprc ] && cp $WORKDIR/pbx-msmtprc /etc/pbx-msmtprc - diff -q $WORKDIR/pbx-msmtprc /etc/pbx-msmtprc 1>/dev/null \ + cmp -s $WORKDIR/pbx-msmtprc /etc/pbx-msmtprc 1>/dev/null \ || mv $WORKDIR/pbx-msmtprc /etc/pbx-msmtprc chmod 600 /etc/pbx-msmtprc + chown nobody /etc/pbx-msmtprc # Copy over the extensions file which has voicemail enabled. cp $TMPL_EXTVMENABLED $WORKDIR/extensions_voicemail.conf + + # Create the voicemail directory in /tmp + mkdir -p /tmp/voicemail + chown nobody /tmp/voicemail + + # Create the recordings directory + mkdir -p /etc/pbx-voicemail/recordings + chown nobody /etc/pbx-voicemail/recordings + + # Working around a bug in OpenWRT 12.09-rc1 + # TODO: REMOVE AS SOON AS POSSIBLE + chmod ugo+w /tmp } @@ -670,12 +805,13 @@ start() { config_load ${MODULENAME}-voip config_foreach pbx_add_peer voip_provider - # Create the user contexts, and phone blacklist. + # Create the user contexts, callthroug/back, and phone blacklist. config_unset config_load ${MODULENAME}-calls pbx_create_user_contexts pbx_add_blacklist config_foreach pbx_add_callthrough callthrough_numbers + config_foreach pbx_add_callback callback_numbers # Prepare sip.conf using settings from the "advanced" section. config_unset diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/delayedcallback b/applications/luci-pbx/root/etc/pbx-asterisk/delayedcallback new file mode 100755 index 000000000..903efe9ad --- /dev/null +++ b/applications/luci-pbx/root/etc/pbx-asterisk/delayedcallback @@ -0,0 +1,18 @@ +#!/bin/sh + +# Check if there are more than one instance of this command +# with the same command line running at the same time for some +# reason, then quit. We are checking for the same +# commandline in order to permit two different callback +# attempts simultaneously. + +if ! grep -q "$@" /dev/shm/delayedcallback.[0-9]* 2>/dev/null +then + echo "$@" > /dev/shm/delayedcallback.$$ + sleep 25 + asterisk -r -x "$1 $2 \"$3\" $4 $5 $6" + rm /dev/shm/delayedcallback.$$ +# echo "`date` $@": >> /dev/shm/delayedcallback.log +#else +# echo "`date` ERROR: There appears to be a callback attempt in progress to: $@" >> /dev/shm/delayedcallback.err +fi diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions.conf.TEMPLATE index 534945cc1..c8966edd8 100644 --- a/applications/luci-pbx/root/etc/pbx-asterisk/extensions.conf.TEMPLATE +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions.conf.TEMPLATE @@ -21,4 +21,5 @@ exten => _[!-~].,1,Dial(SIP/${EXTEN},60,r) #include extensions_incoming_gtalk.conf #include extensions_blacklist.conf #include extensions_callthrough.conf +#include extensions_callback.conf #include extensions_user.conf diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check.conf.TEMPLATE new file mode 100644 index 000000000..06b1a4b6b --- /dev/null +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check.conf.TEMPLATE @@ -0,0 +1 @@ +exten => s,n,Gotoif($[ "${CALLERID(NUM)}" =~ ".*|NUMBER|" ]?context-user-callback,|NUMBER|,1) diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check_footer.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check_footer.conf.TEMPLATE new file mode 100644 index 000000000..282fe9e8f --- /dev/null +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check_footer.conf.TEMPLATE @@ -0,0 +1,2 @@ +exten => s,n,Goto(${SOURCECONTEXT},${SOURCEEXTEN},donecallback) + diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check_header.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check_header.conf.TEMPLATE new file mode 100644 index 000000000..be289c4d3 --- /dev/null +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback-check_header.conf.TEMPLATE @@ -0,0 +1,3 @@ + +[callback-check-call-context] +exten => s,1,Noop() diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_gtalk.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_gtalk.conf.TEMPLATE new file mode 100644 index 000000000..43eec788f --- /dev/null +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_gtalk.conf.TEMPLATE @@ -0,0 +1,4 @@ +exten => |NUMBER|,1,System(/etc/pbx-asterisk/delayedcallback "channel originate Gtalk/gtalk-|CALLBACKPROVIDER|/|NUMBER|@voice.google.com extension |NUMBER|@disa-call-context" &) +exten => |NUMBER|,n,Wait(|CALLBACKHUPDELAY|) +exten => |NUMBER|,n,Hangup() + diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_header.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_header.conf.TEMPLATE new file mode 100644 index 000000000..0b8fb4c23 --- /dev/null +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_header.conf.TEMPLATE @@ -0,0 +1 @@ +[context-user-callback] diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_sip.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_sip.conf.TEMPLATE new file mode 100644 index 000000000..300e9fa0e --- /dev/null +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_callback_sip.conf.TEMPLATE @@ -0,0 +1,4 @@ +exten => |NUMBER|,1,System(/etc/pbx-asterisk/delayedcallback "channel originate SIP/|NUMBER|@peer-|CALLBACKPROVIDER| extension |NUMBER|@disa-call-context" &) +exten => |NUMBER|,n,Wait(|CALLBACKHUPDELAY|) +exten => |NUMBER|,n,Hangup() + diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_default.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_default.conf.TEMPLATE index 8d37ddccb..35836e290 100644 --- a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_default.conf.TEMPLATE +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_default.conf.TEMPLATE @@ -4,6 +4,8 @@ exten => s,n,Set(SOURCECONTEXT=default-incoming-call-context) exten => s,n,Set(SOURCEEXTEN=s) exten => s,n,Goto(blacklist-call-context,s,1) exten => s,n(doneblacklist),NoOp() +exten => s,n,Goto(callback-check-call-context,s,1) +exten => s,n(donecallback),NoOp() exten => s,n,Goto(disa-check-call-context,s,1) exten => s,n(donedisacheck),Dial(|LOCALUSERS|,${RINGTIME},r) exten => s,n,Goto(context-voicemail,s,1) diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_disa-nopin.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_disa-nopin.conf.TEMPLATE new file mode 100644 index 000000000..74e48de8c --- /dev/null +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_disa-nopin.conf.TEMPLATE @@ -0,0 +1,5 @@ +exten => |NUMBER|,1,Noop() +exten => |NUMBER|,n,Set(TIMEOUT(digit)=15) +exten => |NUMBER|,n,Set(TIMEOUT(response)=40) +exten => |NUMBER|,n,DISA(no-password,context-user-|DEFAULTUSER|) + diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_incoming_context_gtalk.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_incoming_context_gtalk.conf.TEMPLATE index f0ca37209..3f9cf4c7d 100644 --- a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_incoming_context_gtalk.conf.TEMPLATE +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_incoming_context_gtalk.conf.TEMPLATE @@ -7,6 +7,8 @@ same => n,Set(SOURCECONTEXT=context-incoming-gtalk) same => n,Set(SOURCEEXTEN=|USERNAME|) same => n,Goto(blacklist-call-context,s,1) same => n(doneblacklist),NoOp() +same => n,Goto(callback-check-call-context,s,1) +same => n(donecallback),NoOp() same => n,Goto(disa-check-call-context,s,1) same => n(donedisacheck),Dial(|LOCALUSERS|,${RINGTIME},D(:w11111111)) same => n,Goto(context-voicemail,s,1) diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_incoming_context_sip.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_incoming_context_sip.conf.TEMPLATE index 195600754..b2c3716bf 100644 --- a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_incoming_context_sip.conf.TEMPLATE +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_incoming_context_sip.conf.TEMPLATE @@ -5,6 +5,8 @@ exten => s,n,Set(SOURCECONTEXT=context-incoming-|NAME|) exten => s,n,Set(SOURCEEXTEN=s) exten => s,n,Goto(blacklist-call-context,s,1) exten => s,n(doneblacklist),NoOp() +exten => s,n,Goto(callback-check-call-context,s,1) +exten => s,n(donecallback),NoOp() exten => s,n,Goto(disa-check-call-context,s,1) exten => s,n(donedisacheck),Dial(|LOCALUSERS|,${RINGTIME},r) exten => s,n,Goto(context-voicemail,s,1) diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_voicemail_enabled.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_voicemail_enabled.conf.TEMPLATE index e4b34b5b0..4edd9cb42 100644 --- a/applications/luci-pbx/root/etc/pbx-asterisk/extensions_voicemail_enabled.conf.TEMPLATE +++ b/applications/luci-pbx/root/etc/pbx-asterisk/extensions_voicemail_enabled.conf.TEMPLATE @@ -1,15 +1,27 @@ [context-voicemail-record-greeting] -exten => *789,1,Wait(2) -exten => *789,n,Playback(/etc/pbx-voicemail/greeting) -exten => *789,n,Wait(5) -exten => *789,n,Record(/etc/pbx-voicemail/greeting:WAV,20,90,k) -exten => *789,n,Wait(2) -exten => *789,n,Playback(/etc/pbx-voicemail/greeting) +exten => *789,1,Wait(1) +exten => *789,n,Playback(/etc/pbx-voicemail/recordings/greeting) +exten => *789,n,Wait(1) +exten => *789,n,Playback(beep) +exten => *789,n,Playback(beep) +exten => *789,n,WaitExten(30) + +exten => t,1,Playback(vm-goodbye) +exten => t,n,Wait(2) +exten => t,n,Hangup() + +exten => *,1,Playback(beep) +exten => *,n,Playback(beep) +exten => *,n,Record(/tmp/voicemail/greeting:gsm,20,120,k) +exten => *,n,Wait(1) +exten => *,n,Playback(/tmp/voicemail/greeting) + +exten => h,1,System(/etc/pbx-voicemail/pbx-move-greeting &) [context-voicemail] exten => s,1,Wait(2) -exten => s,2,Playback(/etc/pbx-voicemail/greeting) +exten => s,2,Playback(/etc/pbx-voicemail/recordings/greeting) exten => s,3,Wait(2) -exten => s,n,Record(/tmp/voicemail%d:WAV,20,180,k) +exten => s,n,Record(/tmp/voicemail/voicemail%d:WAV,20,180,k) exten => h,1,System(/etc/pbx-voicemail/pbx-send-voicemail '${RECORDED_FILE}.WAV' '${CALLERID(all)}' &) diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/sip.conf.TEMPLATE b/applications/luci-pbx/root/etc/pbx-asterisk/sip.conf.TEMPLATE index 6069554e0..8f3b112ff 100644 --- a/applications/luci-pbx/root/etc/pbx-asterisk/sip.conf.TEMPLATE +++ b/applications/luci-pbx/root/etc/pbx-asterisk/sip.conf.TEMPLATE @@ -1,4 +1,5 @@ [general] +transport=udp context=default-incoming-call-context allowoverlap=yes allowtransfer=yes @@ -28,6 +29,7 @@ directmedia=no sipdebug=no bindport=|BINDPORT| externhost=|EXTERNHOST| +externrefresh=60 #include sip_registrations.conf diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/sounds/auth-incorrect.gsm b/applications/luci-pbx/root/etc/pbx-asterisk/sounds/auth-incorrect.gsm new file mode 100644 index 0000000000000000000000000000000000000000..12fec25d56cf39e92b04ae899eed85d34d994931 GIT binary patch literal 7458 zcmXwdc~sH~)OJ(0Z&PYbf|CjE+SH`Dw2Y-9V4Aoqk|Jt?g1NR>O}Ui|mZ&YFserg3 zmK%z;xS)b-!jDZzO~75VWtyp(-tX)E% z9QpP4j&6HM3Wt8Na#BoQ#%5Lm8(%AaxiSP(CVCx|eWI1(aR9J>i>^)H_2s|omExfS z*zYY)MBtd}IzRiCydiJDZa~vAdb{FZ-=ycjSWHs>o9uy_FpH^HQ*FF^hCDv@NnYWe zTq{gjZvOa-Tk6c>$v5REi3gVC%@;iA?gykxp>r;8o`3v+Za+E1i5|K<^vQ;$IStPY`3-+0}sQtJ8_Zm*WQ~as*%A^H{DFa(2JNws@ zz0I?d6+eZN?cTr1@YQ5O?SV@Q*AF$dQ zK)s)$ZYm<{icjoOZUq?zNUY=Ro>W;2l!U)QlDT=`C}nL0(i}itos^jV{<^NX4~R)3 z9wKepLvXrmHmTix^8UWsDWMSR)udTty6Qe0|5+Ll8Zfe+wL>Ej40ST%N*|vFb!tvM zva%O0F$Bg=G+&u%nshj>4>?Jo-B9rXh_6t0L5-ZELs-f5t-F)sH_I(E4-{9XZz@ZP z;4d(+U`t`9bhesv*{A7g`oGTA%O(n&R*~PIu6BCO4c;{-VTW-JOWrK_ur|f6w+^OG zxEdl)c=<#bDj*!Vzu}aRK%sNZ(K=CkukZMB+)}OkuMLo$06um~S2Y*^8L>SopTXO8 z?bAc~R(oAa$Fw(dNG}KRT5Mjn5Ab1F?;^n7GwDtqIqipQXB&1A5v)a1Qg}%RNYqe_ z()v}OQNv8Y92eyIK-h71b>~UPlRkdc@cEiU#$wCNyCILg#@z)( zPSMAx=b;0Q4nR~CwG+z}?`SOkled|-4`tqqwYUIAyMw#32S*!gB@#1Nu~Qhr7rJT> z!o}3+KB|G>)W2|iQjP&;t|4x3-b-R^d{wwDU+9HA5H7ub_o%yZ50nS~VoK{Vh0Qkp zLzBc9Vq$Tc0aZeqSla*dtef~KZnk}2iT`sPy^~)@fJg~?5uaZVNM}E^K*RWqW0<-l zVf3Zk+>fWjG(+VaX05blS6D+>=2dK}ergy$JyOaI4T~IGtwTayo3h>$=kQXd9*xoC zI=KIzKHdx~i~4}WdgJz&L2YaFP^9ob0UsrU?wVFk_H}-#xV{xvT^B++*A>)1pqE^% zCJa0?g1y)!Rf8|R70xRI1s%&_F{ZMIozyN<&s(46PF=b56yCj%AUUO3x zwX?>uV@{spYCGL!l3Yt2P=WOLR-!Hy8 zcOnGWmeyRQ$sh8{+Br^%0__Gm7yPz=eSLyf~;19NR5GeVnr+l_HcZ;)vw zbr4C+DH+)Bf$$`WrF=XzIJ*cdr&+t9KghKUBS-rw19K9hD>bRy{Mn`yyTj$ke|#xi z4Go!0%j#HJw6O#II1j)w)cAz9UwGGMef`N!1V9oxJh2#Hdbx|9Z0}em+l$3Eakv|E z_3Z`)XOuMP7FzM^(FLKsUg1Bqr6HKAAXOycdq2whkrOX&UlbY zK&Kxpe%#0wb3Apee3>X3`7#mRs|6(_kE5BEvsC;0XboSL8|omnJbk|ieRo*T%S(=~ zu`l*&1kkku?7~Ks@4aYsf!9`=Jw|D9FlnjJCV}IAJ0~na|uQ6mdaNEM<$&0NVDIuzn-!5>g6MoBRw{Zu>%8c7< z9h6xgXc$sEi0G!4)ZJXmY&*|Yk+`zXx}I|>Tnu&r2Z}d+7dCe?cr>6!QkSxp`LYhC zIWSp;JMSPa_#1@J-uaMva_`uAmM+y+4J?-|_C+D56a=|=cpK*7jE;7c;Hsrwp1c&( zj>+km2NtU7n~1g9$U%edgsD+xX;BBShHw#z;Eve@i& zMzs?|j9{_L9YQA%Zbwp)v(oAF>WoUkaVVk=I}Vqd5<5rU%%NYrfr(Wn0JzA5A;J1F zewp34(eUiy3kw@BX^%VT&7HL}_&)h5vS$bNd4pDLoMnhyGZI!ITY&{zmuz zZwtBASG#Lh;6kXJ+ke2bi;Y-tLV~W2-cwN#K&eh_&~F~w_{$gAM!Xc+3Mx>~8*&qZ zdkfHzks^up|tN7u-8%7-Z%f!|-#_qk>M0Eb_)ZWsA+sD*F!4-Bed1C}# zFS6GZO0u$k;G6@#ccxslp~i~Pb#lPD4MeL!Nj0&={5LbLb5yR9T6vI&7%m-h_TV-` z-%T2suO>QZB-*q#xyA^gL<&K3w*w=5Ji#}d%|Z)DAtT*Tt;kd(q30z8$90=7CCo#5 zH`wC~hty@2_9lt$J5z5vTKhPNB}dXYil;_MC>gG7c80GMN+omQj`${)D!bCdfErLH ziO5|QE`&R%r~}GIX9sP88#wzmd?klx)jNY=lI^V|VSTHIGL2xX93J@g275yeSEDhq zkEPUsOP$?8g+h?z9i#c@bR!2%&jDm<5vWB*KknHFx5fhT?tqI_}GXujt~+LDw(E{e-3emX@5L>8Y2e{6$ud; znQ96Jsv8>|ls~x34!79I$0~nd;Hn~w5b8vC$lMP^RC~w+=O2UM8X1<|R9XCkMd2Xy z-UdfdAy?DwjL=YckVGTck1nPBeg3|Yr$$aHG7@sp*>5@35p-u<2u?o!Cq6+RPiY6_ zV3*0KWQ+BcZ(RPsV#Nv1{cUfo*}r8KtDmmQmXI~NfMI3@WNvIwO=8g=FQnx(xmHXK zr4@2ujZcWJWrg-m;-}@bkRtx6$P%-=N|O(|`Km9nZ3oIIgX=OljGnjv1#mab!1vwT ze(iiyBolO|-mLd46zq;X8X0pxR-x+y`zljI<41FLto{OX`RnfXDlqzgD(|BF%0BiE zWo>PK`8_>IuGYOY+P`yeip@Yt2C=oVE>+oQ$&SS`%l<@2U&Jxh62<9f=WkjPwFC<_ z&m^Ai0fe=i1!WR=ao5b{DoUFM2o5}<+oZEwH~s3xB)HtL(A`hdmpX7&7F_2dzHgTo z3WNlvg-k;e8jg>Y$7xuDxdTd)$pSOsl~|$^h*^DND5k}KG9YY9q1~3o(TvZPTr>|H zJ@@kbZ;z{=^zmrqzzk8<(=X!TJ_mUXY8VgQ4fR5)2m6YF#+v8&s8lF= zjuVI$2NvNTkH?Dl^cz1Rq*w*vA!n?ghggdt*cQDg$N=d;`xb)B-iV~*Dq?TbWCm9v z?cJ5^v+c9o^rX*QO(vq)MG>;XryNDsGhUvPhc6PcpQ~R;_h>WaE3s6a_1;v&-*{X3(mhi)FiN>Qsk8|(G+EJE18gyi9fciQ!G}=vmYphmKRP^y@ zK(}R`!U7~v@ zwrQo1cjWGcFKRNZK~n3VaDEtNT~&MEDrdVEpc$aT6U>{z79Bx;lP?Wz6T%2`!hb&Ytb~wwNaEL7J%8KqTq5Ne% zXi^mS#PRH1*SXe`>}7d{&Tk{as9_U=xm;L%llVXoHe4N~BJ?li&}HU>0T1P~JJ}(l z{RsL8eo-E?y=`J6kT-|K`ygT_vaUT&ZB@ycy3Z7ptwdJ>uTiZ1^=v&S{QeF*5UMQCNWA)?{vH=Yyzv3Py2>wlJkfqQ(N_F$-2O%iOI#BFOrH#+OKnII=P8Zj zCWZWdisx6*gQAK&lmrX?>v+yl3FfAQO8OidT{3!9F7q*677kB9&lw&VJc? z@AG6y$e@LtVl^lzYd9u}3bU42N4+Z&Zu^y9%LdUtMyW^>I9K2&{G>*3!#S$N21xx8FQ|mbT{d^GeF4$vLLO zoDFY9TvxU)(vRL7igNqcFC#!jLcH|Na3~}9KJyoFnWXxEMXT)KWPf)9Flp!(`Vy*` z(qF+q)B=U@c^}q2>ebq}V&V-+m%sZx@e@bg8rH|sSq<3|RE^ zPzP$=7t(o_!T78*!AQL(Hv#0UI|Q?(R(+vgPeMF3zSPE?NG4g=V>OpYbGoQlq(DV> zoes&Wm6x#OlDgA-6S4FQUdM;Zv3z?8@`VaJ+ZLs3vlp8Vwi=@8O3e*@o3R9#iu6Ur zV;=1bvAZ0i<-bKnRAMzf22_MrYOa4U4cm8wI>-0y>g|}ZdLigi^ZX1u#a(=9Uh`qB zq#9b$7S`L$?BnfwQ+tk`i2;Rey<+SG#lLh-(cbQOEYU)B8(zD;QiE(8!gV(1bP8j~ z@Y0=@m|If3nZfqWq=}e(PSwSp>F*?c1MY_9gS7oEBRIG=Pu}~cduX}HK2FMt&DBZm zMH(1Ei!p2=^dTC5F)w_jNeH_#CwK6CwSAQhRd4e>gx`a<{+9!<`^znev=k@I9 zs8k}$Y3$c7hiJ#({zF#Bn1wuR)tvW4O@le&|s;kKpMk^h7{ z)kJ3tA~J&K5-nb)_CF`F`y2BP6}8%ZSh1{W}*3^wzY6?pD1GnTg~13dy6TnCQQG2w)e4H7lO3HS^{I zN$yd#_)C&WZ<0BTzUClK5bRMlxsZ$oN*4}A6|70I>%Vz1O$f*C*Un%&V$?%c;MoyDW(+f`XlTEt&G zwBo2}SM*vZ@JJ`Wd18S1Bx>+_4(t1Hq`eNNC0%^Q&ZKxa%1q61U4G0M5?@53$Bk9c zVoBLVI`R>rrc|7IYE>MYZuy{4991=I7hXOHi9c5nN^(i9!}Dop5R>B6NaI5(S{G$b z$Ni>-A58v$r15KvUvy}A+K!IG;a>sUNb>NV^PL*9`_^H^w!W0M|0pP?hIAhVV#6gwtWm3$EjrR!5Oan>|1q5%i!!)%! zVPg72DcpJ0mW_oRX^v>I_3#jO>lD+=9>g9}6I|wH8@XiE@n3-wH(^6N5`3fbRUcVl zBRAUZXKYgR!g&!)=}=E~J1RSbAlYK#R_ttdYiN{RYiQLp-c#uNNc+Pwwm(?)tji@u z;U^(x>e5IjV9Ih>nU4tecCj5?alvPH4F&iP`N!^iktAW4fyx5+BA7`vI|El7V*-h# zf%Q&-mJo2D;NrArS(Jpx#7F{d+N=t>FQ1WItSGJD{FZC=Dg59-!8i5+k6jYWOfx=b zXm3EYyHy}crJINZbF3Wuh=CCHPDBmINd>U-rbpN)?juS&hz%d0H%FK>@E`3FFYIX4 zB0eE6gaG(7wYs@_pqf(p0>kbC=fb`PH+0f+1T}tw&6NC3zF3>d_6Xb-ems#?>O0?% zU-WR^m#;NW$eZ;=eWsJSOTfE)8J}U{r9uU?&}+SxE!>kjTtiM!`YmTRG8zBR-dJQ& zJoiBU6IHi#nZrGzqYgoq(9a&HlN@b)ZcEi(tP7&Lxagk-dX7p8Y(ssGES3~we%{^f zjKs;1_3j!Xc?FQOX&yxxN7^Cz?7uKBa8=VrEv6m`rXIcP`}6jiO;`_^nt0bBJQlIP z2(j2pYvLaQg3B#>+8`*G2sbW`y2MFN?V?$m#6EF#W-CJX<;Q9BESi5L12uzFbTMOU#nBu1k&Q{u3f--Z}Np z=4_2u@@p&9E})fBL_5q>4J>9xZ=&tCoThMO>Y_Xxx~w18CZ#n8d??LET~WXDm+pb30zG@)|0^F zTwaC6b%4my0MGnLxfR+;ZGu!#vE^z#sYCrf+6_dK1y#AiD|1?W0CJ+`z7Kr{9dp%4 zw9aQd{NZX?-H4_OW)u1^ z0MqQDQgqKF*TqW*(a{#WNIbKuOK{*vIXa?mcT8KnIE-OxK(F2+=QyaCnZ7YpQzDab zGrYj)gs%=+?d3`rS!EfHp>_U%Qf-yqy*O+tlu>2eqkoOBS*IuYV~;UK)+M;&ssf6j7Im*SK-dgj8NxARwX8r@6Ud=)L-t>Xjy`-lNywYfXx#jLZ?ZN|ExJzq)m!pt z>m2=7v~|SbN!@D*n4$vpu!w;$^QmJy@l3`bq(}#xnS1G&v;H`7Ue&z8P!i-nSLD5T z^=&DfO5fHGxz#$k9%E-U#iiB3BULT_n*dDe;v~AyAQFEe!Pm3~%ogsfa?1lJ$@8n2 zgODq%C`oYOqPSwSy~nsfS+Ut%oWvEQUHkQJA%H3=qh}iTC=zTTVAedp((H1e$rVtdsS1#X zEtWO?^z~ZQl5fj7!Am=2M7zu2p$~Ei&bYWJNk|vV|I|iw&vvGJ#Xbw@^NxA4{PFRsSX)g?NkU2*Z>5xL6!>m8hsB z_Lx>>IXcOHIefHO)`P1z{d+&@hzEVzwqAMm(Tu1qjR0=lu~0t9jLzW0RHv);Z}n)Hc87M#f;N*exn~E-*L760&b|M6 zttRHr)MNHK(r?U+tWcsyqz4TZ%3GCrP#+oo!R>)ybcaS$Dfslb4)fr)S=^)cW#Eb5 z+sU;Jwh<3(NRt~vmUDz5w<{fusazU)CO};{Z1BTGeLK5e85HRygk1mOXh{ZCwMLF6 z1&HO5+wRZ=q&4t1muxw;0j8!5LT_z=mr>n8>)nBngmx&)*+E5iget1L>K?B+yMq&v TQ11;$C>059_}}38f7$;B(8DRC literal 0 HcmV?d00001 diff --git a/applications/luci-pbx/root/etc/pbx-asterisk/sounds/beep.gsm b/applications/luci-pbx/root/etc/pbx-asterisk/sounds/beep.gsm new file mode 100644 index 0000000000000000000000000000000000000000..d38eda9cc55c8de7b488dbd7993b545210be692f GIT binary patch literal 726 zcmXBQdrT4m9Ki9;=GJEGkIcDg8i$&pvgQl{tu}nSmMJ3w0!ssDs5t@IbhULhHDcN5 zAwJ5ubC)8avqCuaAJmDVfr)ciq@DswJ{rxow*JYT|9|%VJzR88U2k!MjojJF7fj^r zC*|(+K#{DK$*YbmNqm)yaTTLTMBqUpUjfZIBp&Snpdh}o zWA65`Fc=V4*|~QFxITN>pjNRsdxIFJpG;+ zAwTjW1fAy+FFqxVGzJ9-N7RTDT!9SPyuf!izpRII`7X zzAJ+6(=OQ~T?{V;k-=KAvQ^WAOE0F{(!6lE>~-u1VN=EpbjC*jjHQ*l?9LTJ)pOH% zwFg|PiS7`Aw|!4|RAL7?Xjv4YvobhvqS;N|1p2B3VS;&lag?2XfdCk&LO54=LhJtC zJ#HEdd`?LZEB9J?^h)oa!vYXu!crM>(s)9kT&ruMlN)I|2VAkz@_Us4x(P~05bKfy z_6W_=7ae4hUPenCuqUR4dkB14Ot7B$T>zyV4=79DhU9EBzorWDiSc~S&%*+em?ScU zJ8-e$nz#|Mj_E$x)XuUz#Uo3Q0FNP4bquO=f?GBEsUaa0n#m2V!$4*Ab#^TQ%-|_x zgl2cLBxj{lsF`ew)0jzeuyPx97ZI;^vM}BOP=B*g{RvJgfHxeG#N?&`NhFQ7+~fdA+il4t*PDtR8p;4R+j2=8 zfB-h+l1Cf7AV(x^w&d<$M;vlVBiSUfnPH>=Hso?h+-@K^6}07%@D zM>|mPXOhF|^%Su%Q(%l1P-S;T3*S z#T!_`Lamlo+*Kf!nyr0=(DAe#8Cs!6iqW~DwIR6Lezh#<;i%wF$n08x`3gx~+tD=B zpqX6&xma$z)3TsnWCF^|uE1I24QCsypl4leRFu%NyWv^5pjjolBUfVp5_X-#v20){ zTUKoxu)ye=ZMNjlZMAh#Y`{%jO;qK!z+!c>yA#^LM_$Y<+^*nE(PrCQ*YT#(f(ym&u&S6@18Z9C$fdI*t0y)1+jPVDSVYF6K0^s4*hDA&0w1pZc97S=96kEX+V`C zE>lNqAnbH)GTUl_SlpLJBi6vDT}In>(J8CqDQ>{FnQBW5+<`e{hD9OZpw{w^TN~h@ zwp5YG-O#PYCK~F%=TmL9T;#w-6;;P#+|S z)a<-t3|mXT8j41;w@jCMim4l03#8$`Mw++hX7&oo#nkbPs#IMoy6KHx<6R0TBB~cV zw@5~!ZPP`!h5fo{(Pq^1d}f+kNbcKF)l;=;E7FHJ;j<~$*KR1=vr4#|>a`u!G*xO; zvF0{o9_pf3=f#zXMI)^$H(gQcktamd?KrM28`w`0|ERiaa+Nv~UN z#~Y()KICb~BBKd6+=;l`p{KE>im2Pwv0Y*lQRI43Zb)8H#ZOtSQSr%eQqgP0_+g~`tS8F!gXV)9m zW^L`mS;g5icZ^%LNFAH5IpJSuLgaNbcU{FsC3U3c)n9Gy0$T_jAu3lPn4}ehUesBK?gOaeYT{}p zXR4yFWMwxKQvvstYNVV~Vae2sG@#YkMzTwzV%M>)x=>KU_v&^gn581^D07(7p&|(M zRy2mxm`1V;?!rl(k|r*iq4-+LMs?_+OdF3T`<&q8nrkSc(wv3jTjU{WGHo{$+Cb?d zN=0JUz{?zr=NgEBKTN45Wz!*y-RgRvRPkL4CRm_Y%rMC=Sl~3%vb$7T&=d{ynsgIl19|BfHx#|M4MPZS!1o%qts=rq?%BG dHzaW>BTxWIB$7!aPyk6Jl1U^`07)d0NhDIuL#_Y- literal 0 HcmV?d00001 diff --git a/contrib/package/luci/Makefile b/contrib/package/luci/Makefile index 353e69e96..63b1196bf 100644 --- a/contrib/package/luci/Makefile +++ b/contrib/package/luci/Makefile @@ -448,10 +448,16 @@ $(eval $(call application,pbx,LuCI PBX Administration,\ +PACKAGE_luci-app-pbx:asterisk18-codec-a-mu \ +PACKAGE_luci-app-pbx:asterisk18-codec-alaw \ +PACKAGE_luci-app-pbx:asterisk18-func-cut \ - +PACKAGE_luci-app-pbx:asterisk18-res-clioriginate)) + +PACKAGE_luci-app-pbx:asterisk18-res-clioriginate \ + +PACKAGE_luci-app-pbx:asterisk18-func-channel \ + +PACKAGE_luci-app-pbx:asterisk18-chan-local \ + +PACKAGE_luci-app-pbx:asterisk18-app-record \ + +PACKAGE_luci-app-pbx:asterisk18-app-senddtmf \ + +PACKAGE_luci-app-pbx:asterisk18-res-crypto)) $(eval $(call application,pbx-voicemail,LuCI PBX Administration Voicemail Support,\ - luci-app-pbx +PACKAGE_luci-app-pbx-voicemail:msmtp)) + luci-app-pbx +PACKAGE_luci-app-pbx-voicemail:msmtp \ + +PACKAGE_luci-app-pbx-voicemail:coreutils-base64)) $(eval $(call application,ltqtapi,Lantiq voip)) -- 2.25.1