From 9ddaf1d51602a531d463f9047958b9de233123ca Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Thu, 18 Jul 2019 15:51:25 +0300 Subject: [PATCH] arc: emsdp: Add initialization of PSRAM If the "Page Mode" is not enabled on the device, read operations from PSRAM may result in incorrect data. Signed-off-by: Alexey Brodkin --- board/synopsys/emsdp/emsdp.c | 37 ++++++++++++++++++++++++++++++++++++ configs/emsdp_defconfig | 1 + 2 files changed, 38 insertions(+) diff --git a/board/synopsys/emsdp/emsdp.c b/board/synopsys/emsdp/emsdp.c index c0770b58c1..7a3fd5b7f2 100644 --- a/board/synopsys/emsdp/emsdp.c +++ b/board/synopsys/emsdp/emsdp.c @@ -48,6 +48,43 @@ int mach_cpu_init(void) return 0; } +int board_early_init_r(void) +{ +#define EMSDP_PSRAM_BASE 0xf2001000 +#define PSRAM_FLASH_CONFIG_REG_0 (void *)(EMSDP_PSRAM_BASE + 0x10) +#define PSRAM_FLASH_CONFIG_REG_1 (void *)(EMSDP_PSRAM_BASE + 0x14) +#define CRE_ENABLE BIT(31) +#define CRE_DRIVE_CMD BIT(6) + +#define PSRAM_RCR_DPD BIT(1) +#define PSRAM_RCR_PAGE_MODE BIT(7) + +/* + * PSRAM_FLASH_CONFIG_REG_x[30:15] to the address lines[16:1] of flash, + * thus "<< 1". + */ +#define PSRAM_RCR_SETUP ((PSRAM_RCR_DPD | PSRAM_RCR_PAGE_MODE) << 1) + + // Switch PSRAM controller to command mode + writel(CRE_ENABLE | CRE_DRIVE_CMD, PSRAM_FLASH_CONFIG_REG_0); + // Program Refresh Configuration Register (RCR) for BANK0 + writew(0, (void *)(0x10000000 + PSRAM_RCR_SETUP)); + // Switch PSRAM controller back to memory mode + writel(0, PSRAM_FLASH_CONFIG_REG_0); + + + // Switch PSRAM controller to command mode + writel(CRE_ENABLE | CRE_DRIVE_CMD, PSRAM_FLASH_CONFIG_REG_1); + // Program Refresh Configuration Register (RCR) for BANK1 + writew(0, (void *)(0x10800000 + PSRAM_RCR_SETUP)); + // Switch PSRAM controller back to memory mode + writel(0, PSRAM_FLASH_CONFIG_REG_1); + + printf("PSRAM initialized.\n"); + + return 0; +} + int board_mmc_init(bd_t *bis) { struct dwmci_host *host = NULL; diff --git a/configs/emsdp_defconfig b/configs/emsdp_defconfig index 64281d0529..5e55e3e2b2 100644 --- a/configs/emsdp_defconfig +++ b/configs/emsdp_defconfig @@ -7,6 +7,7 @@ CONFIG_ENV_SIZE=0x1000 CONFIG_SYS_CLK_FREQ=40000000 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_VERSION_VARIABLE=y +CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="emsdp# " # CONFIG_CMD_BOOTD is not set -- 2.25.1