From 9ae0d550741db45e933dc73e7135d1861e3a9b62 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 18 Nov 2011 12:48:06 +0000 Subject: [PATCH] OMAP3 SPL: Rework memory initalization and devkit8000 support This changes to making the board be responsible for providing the memory initialization timings in SPL and converts the devkit8000 to this framework. In SPL we try and initialize both CS0 and CS1. Cc: Frederik Kriewitz Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/omap3/sdrc.c | 28 +++++++++++---------- arch/arm/include/asm/arch-omap3/mem.h | 26 ------------------- arch/arm/include/asm/arch-omap3/sys_proto.h | 2 ++ board/timll/devkit8000/devkit8000.c | 21 ++++++++++++++++ include/configs/devkit8000.h | 5 ---- 5 files changed, 38 insertions(+), 44 deletions(-) diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 2756024caf..a27b4b124e 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -148,6 +148,18 @@ void do_sdrc_init(u32 cs, u32 early) sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; + /* + * When called in the early context this may be SPL and we will + * need to set all of the timings. This ends up being board + * specific so we call a helper function to take care of this + * for us. Otherwise, to be safe, we need to copy the settings + * from the first bank to the second. We will setup CS0, + * then set cs_cfg to the appropriate value then try and + * setup CS1. + */ +#ifdef CONFIG_SPL_BUILD + get_board_mem_timings(&mcfg, &ctrla, &ctrlb, &rfr_ctrl, &mr); +#endif if (early) { /* reset sdrc controller */ writel(SOFTRESET, &sdrc_base->sysconfig); @@ -164,22 +176,12 @@ void do_sdrc_init(u32 cs, u32 early) writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); sdelay(0x20000); -/* As long as V_MCFG and V_RFR_CTRL is not defined for all OMAP3 boards we need - * to prevent this to be build in non-SPL build */ #ifdef CONFIG_SPL_BUILD - /* - * If we use a SPL there is no x-loader nor config header so - * we have to do the job ourselfs - */ - - mcfg = V_MCFG; - ctrla = V_ACTIMA_165; - ctrlb = V_ACTIMB_165; - rfr_ctrl = V_RFR_CTRL; - mr = V_MR; - write_sdrc_timings(CS0, sdrc_actim_base0, mcfg, ctrla, ctrlb, rfr_ctrl, mr); + make_cs1_contiguous(); + write_sdrc_timings(CS0, sdrc_actim_base1, mcfg, ctrla, ctrlb, + rfr_ctrl, mr); #endif } diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 4f996d9eb3..09f5872389 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -212,32 +212,6 @@ enum { ACTIM_CTRLB(NUMONYX_TWTR_165, NUMONYX_TCKE_165, \ NUMONYX_TXP_165, NUMONYX_XSR_165) -#ifdef CONFIG_OMAP3_INFINEON_DDR -#define V_ACTIMA_165 INFINEON_V_ACTIMA_165 -#define V_ACTIMB_165 INFINEON_V_ACTIMB_165 -#endif - -#ifdef CONFIG_OMAP3_MICRON_DDR -#define V_ACTIMA_165 MICRON_V_ACTIMA_165 -#define V_ACTIMB_165 MICRON_V_ACTIMB_165 -#define V_MCFG MICRON_V_MCFG_165(PHYS_SDRAM_1_SIZE) -#define V_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_165MHz -#define V_MR MICRON_V_MR_165 -#endif - -#ifdef CONFIG_OMAP3_NUMONYX_DDR -#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165 -#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165 -#endif - -#if !defined(V_ACTIMA_165) || !defined(V_ACTIMB_165) -#error "Please choose the right DDR type in config header" -#endif - -#if defined(CONFIG_SPL_BUILD) && (!defined(V_MCFG) || !defined(V_RFR_CTRL)) -#error "Please choose the right DDR type in config header" -#endif - /* * GPMC settings - * Definitions is as per the following format diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 9e644103ee..80e167b0c9 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -38,6 +38,8 @@ void per_clocks_enable(void); void memif_init(void); void sdrc_init(void); void do_sdrc_init(u32, u32); +void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, + u32 *mr); void emif4_init(void); void gpmc_init(void); void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index fee0dff33c..b06aab6176 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -138,3 +138,24 @@ int board_eth_init(bd_t *bis) return dm9000_initialize(bis); } #endif + +/* + * Routine: get_board_mem_timings + * Description: If we use SPL then there is no x-loader nor config header + * so we have to setup the DDR timings ourself on the first bank. This + * provides the timing values back to the function that configures + * the memory. We have either one or two banks of 128MB DDR. + */ +void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, + u32 *mr) +{ + /* General SDRC config */ + *mcfg = MICRON_V_MCFG_165(128 << 20); + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + + /* AC timings */ + *ctrla = MICRON_V_ACTIMA_165; + *ctrlb = MICRON_V_ACTIMB_165; + + *mr = MICRON_V_MR_165; +} diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 3ea4532500..4b58dc3bcb 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -67,10 +67,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) /* Hardware drivers */ - -/* DDR - I use Micron DDR */ -#define CONFIG_OMAP3_MICRON_DDR 1 - /* DM9000 */ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_DRIVER_DM9000 1 @@ -279,7 +275,6 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* at least 128 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* NAND and environment organization */ -- 2.25.1