From 9a23c49662b3c7b95f2b49401c546bd728af2f8c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 10 Dec 2015 14:18:15 +0100 Subject: [PATCH] net: emaclite: Convert MDIO to use register offset Use u-boot coding style how to setup and access MDIO bus. Signed-off-by: Michal Simek Acked-by: Joe Hershberger --- drivers/net/xilinx_emaclite.c | 92 +++++++++++++++++++++-------------- 1 file changed, 56 insertions(+), 36 deletions(-) diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c index f5e4c029ed..9d413a0bbf 100644 --- a/drivers/net/xilinx_emaclite.c +++ b/drivers/net/xilinx_emaclite.c @@ -50,12 +50,6 @@ /* Recv interrupt enable bit */ #define XEL_RSR_RECV_IE_MASK 0x00000008UL -/* MDIO */ -#define XEL_MDIOADDR_OFFSET 0x07E4 /* MDIO Address Register */ -#define XEL_MDIOWR_OFFSET 0x07E8 /* MDIO Write Data Register */ -#define XEL_MDIORD_OFFSET 0x07EC /* MDIO Read Data Register */ -#define XEL_MDIOCTRL_OFFSET 0x07F0 /* MDIO Control Register */ - /* MDIO Address Register Bit Masks */ #define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */ #define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */ @@ -72,12 +66,36 @@ #define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */ #define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */ +struct emaclite_regs { + u32 tx_ping; /* 0x0 - TX Ping buffer */ + u32 reserved1[504]; + u32 mdioaddr; /* 0x7e4 - MDIO Address Register */ + u32 mdiowr; /* 0x7e8 - MDIO Write Data Register */ + u32 mdiord;/* 0x7ec - MDIO Read Data Register */ + u32 mdioctrl; /* 0x7f0 - MDIO Control Register */ + u32 tx_ping_tplr; /* 0x7f4 - Tx packet length */ + u32 global_interrupt; /* 0x7f8 - Global interrupt enable */ + u32 tx_ping_tsr; /* 0x7fc - Tx status */ + u32 tx_pong; /* 0x800 - TX Pong buffer */ + u32 reserved2[508]; + u32 tx_pong_tplr; /* 0xff4 - Tx packet length */ + u32 reserved3; /* 0xff8 */ + u32 tx_pong_tsr; /* 0xffc - Tx status */ + u32 rx_ping; /* 0x1000 - Receive Buffer */ + u32 reserved4[510]; + u32 rx_ping_rsr; /* 0x17fc - Rx status */ + u32 rx_pong; /* 0x1800 - Receive Buffer */ + u32 reserved5[510]; + u32 rx_pong_rsr; /* 0x1ffc - Rx status */ +}; + struct xemaclite { u32 nexttxbuffertouse; /* Next TX buffer to write to */ u32 nextrxbuffertouse; /* Next RX buffer to read from */ u32 txpp; /* TX ping pong buffer */ u32 rxpp; /* RX ping pong buffer */ int phyaddr; + struct emaclite_regs *regs; struct phy_device *phydev; struct mii_dev *bus; }; @@ -169,38 +187,39 @@ static int wait_for_bit(const char *func, u32 *reg, const u32 mask, return -ETIMEDOUT; } -static int mdio_wait(struct eth_device *dev) +static int mdio_wait(struct emaclite_regs *regs) { - return wait_for_bit(__func__, - (u32 *)(dev->iobase + XEL_MDIOCTRL_OFFSET), + return wait_for_bit(__func__, ®s->mdioctrl, XEL_MDIOCTRL_MDIOSTS_MASK, false, 2000); } -static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum, +static u32 phyread(struct xemaclite *emaclite, u32 phyaddress, u32 registernum, u16 *data) { - if (mdio_wait(dev)) + struct emaclite_regs *regs = emaclite->regs; + + if (mdio_wait(regs)) return 1; - u32 ctrl_reg = in_be32(dev->iobase + XEL_MDIOCTRL_OFFSET); - out_be32(dev->iobase + XEL_MDIOADDR_OFFSET, - XEL_MDIOADDR_OP_MASK | + u32 ctrl_reg = in_be32(®s->mdioctrl); + out_be32(®s->mdioaddr, XEL_MDIOADDR_OP_MASK | ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum)); - out_be32(dev->iobase + XEL_MDIOCTRL_OFFSET, - ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); + out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); - if (mdio_wait(dev)) + if (mdio_wait(regs)) return 1; /* Read data */ - *data = in_be32(dev->iobase + XEL_MDIORD_OFFSET); + *data = in_be32(®s->mdiord); return 0; } -static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum, +static u32 phywrite(struct xemaclite *emaclite, u32 phyaddress, u32 registernum, u16 data) { - if (mdio_wait(dev)) + struct emaclite_regs *regs = emaclite->regs; + + if (mdio_wait(regs)) return 1; /* @@ -209,15 +228,13 @@ static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum, * Data register. Finally, set the Status bit in the MDIO Control * register to start a MDIO write transaction. */ - u32 ctrl_reg = in_be32(dev->iobase + XEL_MDIOCTRL_OFFSET); - out_be32(dev->iobase + XEL_MDIOADDR_OFFSET, - ~XEL_MDIOADDR_OP_MASK & + u32 ctrl_reg = in_be32(®s->mdioctrl); + out_be32(®s->mdioaddr, ~XEL_MDIOADDR_OP_MASK & ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum)); - out_be32(dev->iobase + XEL_MDIOWR_OFFSET, data); - out_be32(dev->iobase + XEL_MDIOCTRL_OFFSET, - ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); + out_be32(®s->mdiowr, data); + out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); - if (mdio_wait(dev)) + if (mdio_wait(regs)) return 1; return 0; @@ -254,7 +271,7 @@ static int setup_phy(struct eth_device *dev) SUPPORTED_100baseT_Full; if (emaclite->phyaddr != -1) { - phyread(dev, emaclite->phyaddr, PHY_DETECT_REG, &phyreg); + phyread(emaclite, emaclite->phyaddr, PHY_DETECT_REG, &phyreg); if ((phyreg != 0xFFFF) && ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { /* Found a valid PHY address */ @@ -270,7 +287,7 @@ static int setup_phy(struct eth_device *dev) if (emaclite->phyaddr == -1) { /* detect the PHY address */ for (i = 31; i >= 0; i--) { - phyread(dev, i, PHY_DETECT_REG, &phyreg); + phyread(emaclite, i, PHY_DETECT_REG, &phyreg); if ((phyreg != 0xFFFF) && ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { /* Found a valid PHY address */ @@ -310,6 +327,8 @@ static int setup_phy(struct eth_device *dev) static int emaclite_init(struct eth_device *dev, bd_t *bis) { struct xemaclite *emaclite = dev->priv; + struct emaclite_regs *regs = emaclite->regs; + debug("EmacLite Initialization Started\n"); /* @@ -352,9 +371,8 @@ static int emaclite_init(struct eth_device *dev, bd_t *bis) XEL_RSR_RECV_IE_MASK); #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB) - out_be32(dev->iobase + XEL_MDIOCTRL_OFFSET, XEL_MDIOCTRL_MDIOEN_MASK); - if (in_be32(dev->iobase + XEL_MDIOCTRL_OFFSET) & - XEL_MDIOCTRL_MDIOEN_MASK) + out_be32(®s->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK); + if (in_be32(®s->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK) if (!setup_phy(dev)) return -1; #endif @@ -536,7 +554,7 @@ static int emaclite_miiphy_read(const char *devname, uchar addr, u32 ret; struct eth_device *dev = eth_get_dev(); - ret = phyread(dev, addr, reg, val); + ret = phyread(dev->priv, addr, reg, val); debug("emaclite: Read MII 0x%x, 0x%x, 0x%x\n", addr, reg, *val); return ret; } @@ -547,7 +565,7 @@ static int emaclite_miiphy_write(const char *devname, uchar addr, struct eth_device *dev = eth_get_dev(); debug("emaclite: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, val); - return phywrite(dev, addr, reg, val); + return phywrite(dev->priv, addr, reg, val); } #endif @@ -556,6 +574,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, { struct eth_device *dev; struct xemaclite *emaclite; + struct emaclite_regs *regs; dev = calloc(1, sizeof(*dev)); if (dev == NULL) @@ -574,6 +593,8 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, sprintf(dev->name, "Xelite.%lx", base_addr); + emaclite->regs = (struct emaclite_regs *)base_addr; + regs = emaclite->regs; dev->iobase = base_addr; dev->init = emaclite_init; dev->halt = emaclite_halt; @@ -592,8 +613,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, miiphy_register(dev->name, emaclite_miiphy_read, emaclite_miiphy_write); emaclite->bus = miiphy_get_dev_by_name(dev->name); - out_be32(dev->iobase + XEL_MDIOCTRL_OFFSET, - XEL_MDIOCTRL_MDIOEN_MASK); + out_be32(®s->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK); #endif return 1; -- 2.25.1