From 99f6f2c0b8cbeb0c6ba464e080ab039984444f1f Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Sat, 11 Aug 2018 17:32:48 +0200 Subject: [PATCH] ar71xx: Add support for TP-Link CPE210 v3 Looks identical to the v2. This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Tested-by: Adrian Schmutzler Signed-off-by: Robert Marko [Rebased, adjusted for separate tplink-safeloader entry, dynamic partitioning] Signed-off-by: Adrian Schmutzler --- .../linux/ar71xx/base-files/etc/board.d/01_leds | 4 +++- .../ar71xx/base-files/etc/board.d/02_network | 1 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 4 ++++ .../ar71xx/base-files/lib/upgrade/platform.sh | 3 ++- .../ar71xx/files/arch/mips/ath79/mach-cpe510.c | 3 +++ .../ar71xx/files/arch/mips/ath79/machtypes.h | 1 + target/linux/ar71xx/image/generic-tp-link.mk | 15 +++++++++++++++ 7 files changed, 29 insertions(+), 2 deletions(-) diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index edca185c62..79f452d8cf 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -252,6 +252,7 @@ cf-e530n) ;; cpe210|\ cpe210-v2|\ +cpe210-v3|\ cpe510|\ wbs210|\ wbs510) @@ -262,7 +263,8 @@ wbs510) ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13" case "$board" in - cpe210-v2) + cpe210-v2|\ + cpe210-v3) ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0" ;; *) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index b6d77ee60f..a7b97bb3dd 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -74,6 +74,7 @@ ar71xx_setup_interfaces() cf-e380ac-v1|\ cf-e380ac-v2|\ cpe210-v2|\ + cpe210-v3|\ dr342|\ eap120|\ eap300v2|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 9a123b60e1..56a4fab80c 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -586,6 +586,10 @@ ar71xx_board_detect() { name="cpe210-v2" tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)" ;; + *"CPE210 v3") + name="cpe210-v3" + tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)" + ;; *"CPE505N") name="cpe505n" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index e9227aaa7b..7fc3d4e3b3 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -590,7 +590,8 @@ platform_check_image() { tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_get_model_string)" '' && return 0 return 1 ;; - cpe210-v2) + cpe210-v2|\ + cpe210-v3) tplink_pharos_check_image "$1" "01000000" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0 return 1 ;; diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c index ceb1769ddd..16efbc8802 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c @@ -236,6 +236,9 @@ MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220", MIPS_MACHINE(ATH79_MACH_CPE210_V2, "CPE210V2", "TP-LINK CPE210 v2", cpe210_v2_setup); +MIPS_MACHINE(ATH79_MACH_CPE210_V3, "CPE210V3", "TP-LINK CPE210 v3", + cpe210_v2_setup); + MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520", cpe510_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 974b69fda6..fb832390c1 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -76,6 +76,7 @@ enum ath79_mach_type { ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */ ATH79_MACH_CPE210, /* TP-LINK CPE210 v1 */ ATH79_MACH_CPE210_V2, /* TP-LINK CPE210 v2 */ + ATH79_MACH_CPE210_V3, /* TP-LINK CPE210 v3 */ ATH79_MACH_CPE505N, /* P&W CPE505N */ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ ATH79_MACH_CPE830, /* YunCore CPE830 */ diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk index 7df1025eec..c38108775c 100644 --- a/target/linux/ar71xx/image/generic-tp-link.mk +++ b/target/linux/ar71xx/image/generic-tp-link.mk @@ -200,6 +200,21 @@ define Device/cpe210-v2 endef TARGET_DEVICES += cpe210-v2 +define Device/cpe210-v3 + $(Device/tplink-safeloader) + DEVICE_TITLE := TP-LINK CPE210 v3 + BOARDNAME := CPE210V3 + TPLINK_BOARD_ID := CPE210V3 + TPLINK_HWID := 0x0 + TPLINK_HWREV := 0 + MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,7680k(firmware),192k(config)ro,64k(ART)ro + IMAGE_SIZE := 7680k + KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O + KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header + DEVICE_PACKAGES := rssileds +endef +TARGET_DEVICES += cpe210-v3 + define Device/wbs210-v1 $(Device/cpe510-520-v1) DEVICE_TITLE := TP-LINK WBS210 v1 -- 2.25.1