From 9986bc3e40e899bea372a99a2bca4071bdf2e24b Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 12 Aug 2007 21:34:50 +0200 Subject: [PATCH] Update CHANGELOG --- CHANGELOG | 1038 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1038 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index 996aedd812..1228908a5a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,756 @@ +commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a +Author: Wolfgang Denk +Date: Sun Aug 12 21:34:34 2007 +0200 + + Minor alignment of output, 2nd try. + Also update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit 6b309f22a724fad8418e811751a0741b893419cf +Author: Wolfgang Denk +Date: Sun Aug 12 20:35:49 2007 +0200 + + Minor alignment of output + + Signed-off-by: Wolfgang Denk + +commit 6f6d7b9c8559e241e8d232621542b8b59699b07b +Author: Wolfgang Denk +Date: Sun Aug 12 18:28:18 2007 +0200 + + Cleanup output on ADS5121 board + + Signed-off-by: Wolfgang Denk + +commit a4d2636f2a859245ed3a401f26189da2dfda4ceb +Author: Wolfgang Denk +Date: Sun Aug 12 15:11:38 2007 +0200 + + Adapt board configuration and fix kernel crash on MCC200 board. + + The update procedure was modified to turn off the USB subsystem + before exit for MCC200 and TRAB. This is necessary as otherwise the + USB controller continues to write periodically to system memory! + + MCC200-specific notes: + - the patch disables the magic key check for MCC200 + - the patch contains the configuration changes made + for the new revision of the board. + + Signed-off-by: Sergei Poselenov + Signed-off-by: Wolfgang Denk + +commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf +Author: Wolfgang Denk +Date: Sun Aug 12 14:47:54 2007 +0200 + + Adjust default configuration of ADS5121 board. + + Signed-off-by: Wolfgang Denk + +commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9 +Author: Wolfgang Denk +Date: Sun Aug 12 14:27:39 2007 +0200 + + Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues. + + Signed-off-by: Wolfgang Denk + +commit 5fe6be6208dda852c3564e384bd78d75784dea3e +Author: Gerald Van Baren +Date: Tue Aug 7 21:14:22 2007 -0400 + + Improve error print messages. + + Signed-off-by: Gerald Van Baren + +commit 99dffca3b7590a16a00bc475c860b67b2a3f1462 +Author: Kim Phillips +Date: Tue Jul 17 13:57:04 2007 -0500 + + fdt: allow for builds that don't want env and bd_t nodes + + protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the + area. + + Signed-off-by: Kim Phillips + +commit 91148bf7aeba142d6f348805db7625db7da64d6f +Author: Kim Phillips +Date: Tue Jul 17 13:56:53 2007 -0500 + + fdt: do board setup based on fdt address specified on bootm line + + The last fdt patch to bootm did board setup based on the address + specified by a prior fdt address command invocation. The bootm + code, as its call to fdt_chosen does, should use the fdt specified + by the user on the bootm command. Note this restores full + functionality for the 8360's existing default boot environment + values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr' + before booting a kernel). + + Signed-off-by: Kim Phillips + +commit e125a2ffc209dd34794e326c7175658253beadf3 +Author: Gerald Van Baren +Date: Tue Jul 10 20:40:39 2007 -0400 + + Call ft_board_setup() from the bootm command. + + In the patch titled "Create new fdt boardsetup command..." I removed the + call to ft_board_setup() from the routine fdt_chosen(), but I forgot + to add a direct call back into cmd_bootm.c + + This fixes the oversight by adding the direct call to the bootm command. + + Signed-off-by: Gerald Van Baren + +commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845 +Author: Gerald Van Baren +Date: Mon Jun 25 23:25:28 2007 -0400 + + Create new fdt boardsetup command, fix bug parsing [] form of set values. + + Previously ft_board_setup() was called by fdt_chosen() which was not + really correctly structured. This splits ft_board_setup() out by creating + a new fdt boardsetup command. + + Fix a bug when parsing fdt set command values which have the square + bracket form [00 11 22 33] - the length was updated incorrectly in when + parsing that form. + + Signed-off-by: Gerald Van Baren + +commit 6f35ded9e85493595e0eb66a82b502a95326d049 +Author: Gerald Van Baren +Date: Mon Jun 25 20:55:58 2007 -0400 + + Tighten up the error messages. + + Signed-off-by: Gerald Van Baren + +commit c45874b05aae897a6c29d1a97d4bb708fca2756c +Author: Gerald Van Baren +Date: Mon Jun 25 19:52:23 2007 -0400 + + Asthetic improvements: error messages and line lengths. + + Tighten up the error messages, split overlength lines. + + Signed-off-by: Gerald Van Baren + +commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1 +Author: Gerald Van Baren +Date: Fri May 25 22:08:57 2007 -0400 + + Fix fdt_chosen() to call ft_board_setup(), clean up long lines. + + The fdt_chosen() function was adding/seting some properties ad-hoc + improperly and duplicated (poorly) what was done in ft_board_setup() + + Clean up long lines (setting properties, printing errors). + + Signed-off-by: Gerald Van Baren + +commit 06e19a07701c968f15d72c083b5872a1a11c7b01 +Author: Gerald Van Baren +Date: Mon May 21 23:27:16 2007 -0400 + + For fdt_find_node_by_path(), handle the root path properly. + + Also removes the special case root path detection in cmd_fdt.c since it + is no longer necessary. + + Signed-off-by: Gerald Van Baren + +commit 9675ee7208ab965d13ea8d8262d77ac4160ef549 +Author: Gerald Van Baren +Date: Thu May 17 23:54:36 2007 -0400 + + Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT + + Signed-off-by: Wolfgang Grandegger + Acked-by: Gerald Van Baren + +commit 1a861169bc3758f9de3aead62b058736c6891246 +Author: Gerald Van Baren +Date: Wed Jun 6 22:47:58 2007 -0400 + + Replace fdt_node_offset() with fdt_find_node_by_path(). + + The new name matches more closely the kernel's name, which is also + a much better description. + + Signed-off-by: Wolfgang Grandegger + Acked-by: Gerald Van Baren + +commit addd8ce83078c25f0eca5f23adbdfc64ca50a243 +Author: Gerald Van Baren +Date: Wed May 16 22:39:59 2007 -0400 + + Fix cmd_fdt line lengths, refactor code. + + Break lines that were greater than 80 characters in length. + Move the fdt print and property parsing code to separate static functions + to reduce coding clutter in the fdt_cmd handling body. + + Signed-off-by: Gerald Van Baren + +commit 25114033ab21788810c48ba4df103b649da1223b +Author: Gerald Van Baren +Date: Sat May 12 09:47:25 2007 -0400 + + FDT command improvements. + + Fix "fdt set" so that it will create a non-existing property. + Add "fdt mknode" to create nodes. + + Signed-off-by: Gerald Van Baren + +commit 38eb508e8e811e2e57628f445de3a24a23c7d804 +Author: Gerald Van Baren +Date: Sat May 12 09:45:46 2007 -0400 + + Reorganize and fix problems (returns) in the bootm command. + + Do *NOT* return after the "point of no return" has been passed. + If something goes wrong, the board must be reset after that point. + Move the "Transferring control to Linux" debug message back to where it + belongs: just before transferring control to linux. + + Signed-off-by: Gerald Van Baren + +commit 89c8757d8f213c47709bdc4efe0695263a6080a6 +Author: Gerald Van Baren +Date: Tue May 8 21:27:35 2007 -0400 + + Fix bugs in the CONFIG_OF_LIBFDT + + Stupid coding mistakes (identified by Timur Tabi, thanks). + + Signed-off-by: Gerald Van Baren + +commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec +Author: Gerald Van Baren +Date: Wed Apr 25 22:47:15 2007 -0400 + + Improve fdt move length handling. + + Make the length parameter optional: if not specified, do the move using + the current size unchanged. + + Signed-off-by: Gerald Van Baren + +commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d +Author: Gerald Van Baren +Date: Wed Apr 25 22:23:36 2007 -0400 + + Minor code clean up. + + Declare the variable fdt properly as extern. + Call the "set_fn" function pointer the "short way" without the full + dereferencing syntax. + + Signed-off-by: Gerald Van Baren + +commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6 +Author: Gerald Van Baren +Date: Wed Apr 25 21:24:27 2007 -0400 + + Improve error messages, more informative. + + Print more than the raw libfdt error message strings. This is especially + useful for cluing in the user when the bootm command aborts due to + blob problems. + + Signed-off-by: Gerald Van Baren + +commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4 +Author: Gerald Van Baren +Date: Fri Apr 20 22:46:53 2007 -0400 + + libfdt: Conditionally compile based on CONFIG_OF_LIBFDT + + This is the way u-boot reduces configured-out code. At Wolfgang + Grandegger and Wolfgang Denk's request, make libfdt conform. + + Signed-off-by: Gerald Van Baren + +commit 923efd286411ed052d9e074f59f8986d6081061c +Author: Bruce Adler +Date: Fri Aug 10 14:54:47 2007 -0700 + + add image size and descriptors for Spartan 3E FPGA chips + + Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1) + + Signed-off by: Bruce Adler + +commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70 +Author: Kim Phillips +Date: Fri Aug 10 15:34:48 2007 -0500 + + make MAKEALL more immune to merge conflicts + + ..by placing board entries one per line, as suggested by jdl. + + Signed-off-by: Kim Phillips + +commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f +Author: Kim Phillips +Date: Fri Aug 10 13:28:25 2007 -0500 + + README: Remove outdated cpu type, board type, and NAME_config lists + + Signed-off-by: Kim Phillips + +commit 49bb59912d21aacb507eb81fd21fb7af650c706c +Author: Dave Liu +Date: Fri Aug 10 15:48:59 2007 +0800 + + mpc83xx: Suppress the warning 'burstlen' + + suppress the warning 'burstlen' of spd_sdram. + + Signed-off-by: Dave Liu + +commit c2c0ab4aff86622b837a48a0e560351f9afafb95 +Author: Stefan Roese +Date: Fri Aug 10 20:34:58 2007 +0200 + + Conding style cleanup + + Signed-off-by: Stefan Roese + +commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e +Author: Sergey Kubushyn +Date: Fri Aug 10 20:26:18 2007 +0200 + + [ARM] TI DaVinci support, hopefully final + + Add support for the following DaVinci boards: + - DV_EVM + - SCHMOOGIE + - SONATA + + Changes: + + - Split into separate board directories + - Removed changes to MTD_DEBUG (or whatever it's called) + - New CONFIG_CMD party line followed + - Some cosmetic fixes, cleanup etc. + - Patches against the latest U-Boot tree as of now. + - Fixed CONFIG_CMD_NET in net files. + - Fixed CONFIG_CMD_EEPROM for schmoogie. + - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and + DV_EVM. Can't check if it works on SONATA, don't have a board any more, + but it at least compiles. + + Here is an excerpt from session log on SCHMOOGIE... + + U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) + + DRAM: 128 MB + NAND: 128 MiB + In: serial + Out: serial + Err: serial + ARM Clock : 297MHz + DDR Clock : 162MHz + ETH PHY : DP83848 @ 0x01 + U-Boot > iprobe + Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F + U-Boot > ping 192.168.253.10 + host 192.168.253.10 is alive + U-Boot > + + Signed-off-by: Sergey Kubushyn + Acked-by: Dirk Behme + Acked-by: Zach Sadecki + Acked-by: Stefan Roese + +commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f +Author: Dirk Behme +Date: Thu Aug 2 17:42:08 2007 +0200 + + Make use of generic 64bit division in nand_util.c + + Use generic 64bit division in nand_util.c. This makes nand_util.c + independent of any toolchain 64bit division. + + Signed-off-by: Dirk Behme + +commit f7c086e94e8ce9aad7268af97f73aa6884686f27 +Author: Dirk Behme +Date: Thu Aug 2 17:41:14 2007 +0200 + + Move 64bit division from avr32 to generic lib + + Move the 64bit division from lib_avr32 to lib_generic. With this, all + boards can do_div/__div64_32 if needed, not only avr one. Code is put + to lib_generic, so no larger memory footprint if not used. No code + modifications. Thanks for proposal by HÃ¥vard Skinnemoen. + + Signed-off-by: Dirk Behme + +commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f +Author: Kim Phillips +Date: Mon Aug 6 18:18:34 2007 -0500 + + mpc83xx: fix ITX[GP] O=builddir builds + + make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop. + + Both the ITX and ITX-GP fail when you use "make O= ..." or + "BUILD_DIR= ./MAKEALL ..." + + Signed-off-by: Kim Phillips + +commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3 +Author: Dave Liu +Date: Wed Aug 1 15:00:59 2007 +0800 + + mpc83xx: Correct the README for DDR ECC + + Update the README for DDR ECC, change the name + to README.mpc83xx.ddrecc. + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 +Author: Dave Liu +Date: Wed Aug 1 15:00:15 2007 +0800 + + mpc83xx: Consolidate the ECC support of 83xx + + Remove the duplicated source code of ecc command on the .c, + for reused, move these code to cpu/mpc83xx directory. + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit 036575c544cf1b69654d8fb334bda69c6ff3da36 +Author: Dave Liu +Date: Sat Aug 4 13:37:39 2007 +0800 + + mpc83xx: Correct the burst length for DDR2 with 32 bits + + The burst length should be 4 for DDR2 with 32 bits bus + + Signed-off-by: Dave Liu + +commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed +Author: Kim Phillips +Date: Wed Jul 25 19:25:33 2007 -0500 + + mpc83xx: add support for the MPC8323E RDB + + MPC8323E based board with 64MB fixed SDRAM, 16MB flash, + five 10/100 ethernet ports connected via an ICPlus IP175C + switch, one PCI slot, and serial. Features not supported + in this patch are SD card interface, 2 USB ports, and the + two phone ports. + + Signed-off-by: Michael Barkowski + Signed-off-by: Kim Phillips + +commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359 +Author: Kim Phillips +Date: Wed Jul 25 19:25:28 2007 -0500 + + mpc83xx: fixup generic pci for libfdt + + add libfdt support to the generic 83xx pci code + + Signed-off-by: Kim Phillips + +commit f57ac7a7b37109245b69db80839ebee26179966a +Author: Kim Phillips +Date: Wed Jul 25 19:25:22 2007 -0500 + + mpc83xx: fix 8360 and cpu functions to update fdt being passed + + ..and not the global fdt. Rename local fdt vars to blob so as not to + be confused with the global var with the same three-letter name. + + Signed-off-by: Kim Phillips + +commit 8be404459a6b7395415a57bb35e8377e3b2b5acb +Author: Jerry Van Baren +Date: Wed Jul 4 21:34:24 2007 -0400 + + mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled + + Several node strings were not correct (trailing slashes and properties + in the strings) + Added setting of the timebase-frequency. + Improved error messages and use debug() instead of printf(). + + Signed-off-by: Gerald Van Baren + Signed-off-by: Kim Phillips + +commit 26d02c9bbac1751c5e19294f000100b48d43a920 +Author: Jerry Van Baren +Date: Wed Jul 4 21:27:30 2007 -0400 + + mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path(). + + The new name matches more closely the kernel's name, which is also + a much better description. + + These are the mpc83xx changes made necessary by the function name change. + + Signed-off-by: Wolfgang Grandegger + Acked-by: Gerald Van Baren + Signed-off-by: Kim Phillips + +commit 9be39a67c9f8fef7107f5df09d673005f04d0963 +Author: Dave Liu +Date: Mon Jun 25 10:41:56 2007 +0800 + + mpc83xx: Add support for the display of reset status + + 83xx processor family has many reset sources, such as + power on reset, software hard reset, software soft reset, + JTAG, bus monitor, software watchdog, check stop reset, + external hard reset, external software reset. + sometimes, to figure out the fault of system, we need to + know the cause of reset early before the prompt of + u-boot present. + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d +Author: Dave Liu +Date: Mon Jun 25 10:41:04 2007 +0800 + + mpc83xx: Fix the align bug of SDMA buffer + + According to the latest user manual, the SDMA temporary + buffer base address must be 4KB aligned. + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476 +Author: Dave Liu +Date: Mon Jun 25 13:21:12 2007 +0800 + + mpc83xx: Revise the MPC8360EMDS readme doc + + When the rev2.x silicon mount on the MPC8360EMDS baord, + and if you are using the u-boot version after the commit + 3fc0bd159103b536e1c54c6f4457a09b3aba66ca. + to make the ethernet interface usable, we have to setup + the jumpers correctly. + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c +Author: Timur Tabi +Date: Tue Jul 3 13:46:32 2007 -0500 + + FSL I2C driver programs the two I2C busses differently + + The i2c_init() function in fsl_i2c.c programs the two I2C busses differently. + The second I2C bus has its slave address programmed incorrectly and is + missing a 5-us delay. + + Signed-off-by: Timur Tabi + Signed-off-by: Kim Phillips + +commit df33f6b4d6d63693dd9200808b242de1b86cb8e8 +Author: Timur Tabi +Date: Tue Jul 3 13:04:34 2007 -0500 + + Update SCCR programming in cpu_init_f() to support all 83xx processors + + Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the + bitfields for all 83xx processors. The code to update some bitfields was + compiled only on some processors. Now, the bitfields are programmed as long + as the corresponding CFG_SCCR option is defined in the board header file. + This means that the board header file should not define any CFG_SCCR macros + for bitfields that don't exist on that processor, otherwise the SCCR will be + programmed incorrectly. + + Signed-off-by: Timur Tabi + Signed-off-by: Kim Phillips + +commit 9546266999f0b9b51372636614211b88d90f0f25 +Author: Martin Krause +Date: Fri Jun 22 13:04:22 2007 +0200 + + TQM834x: cleanup configuraton + + Remove irritating #undef DEBUG + + Signed-off-by: Martin Krause + Signed-off-by: Kim Phillips + +commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc +Author: david.saada +Date: Mon Jun 18 09:09:53 2007 -0700 + + MPC83xx: Fix makefile to generate config.h file in the build directory + + MPC83xx: Fix the Makefile config sections to generate the include/config.h + file in the build directory instead of the source directory. + + Signed-off-by: David Saada + Signed-off-by: Kim Phillips + +commit 1ded0242e437259366792d52b7e9d1e1931d8fa5 +Author: Lee Nipper +Date: Thu Jun 14 20:07:33 2007 -0500 + + mpc83xx: Add support for 8360 silicon revision 2.1 + + This change adds 8360 silicon revision 2.1 support to u-boot. + + Signed-off-by: Lee Nipper + Signed-off-by: Kim Phillips + +commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4 +Author: Kumar Gala +Date: Wed Aug 8 04:14:28 2007 -0500 + + Treat ppc64 host as ppc + + Signed-off-by: Kumar Gala + +commit 0dc4279b08ff82472bec2e2c90858602459febe8 +Author: Jason Jin +Date: Wed Aug 8 09:01:46 2007 +0800 + + Minor fix for bios emulator makefile + + Add $(obj) to LIB avoiding objects be built in the source dir + + Signed-off-by: Jason Jin + +commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6 +Author: Jason Jin +Date: Wed Aug 8 08:33:11 2007 +0800 + + Add CONFIG_BIOSEMU define to guard all the bios emulator code + + Signed-off-by: Jason Jin + + This patch fix the compile issue on the board that did not enable the bios emulator + +commit ed8106433522f2ea8933e9808346860d061d7731 +Author: Zach Sadecki +Date: Tue Jul 31 12:27:25 2007 -0500 + + tsec: fix multiple PHY support + + The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx" + broke multiple PHY support in tsec.c. This fixes it. + + Signed-off-by: Zach Sadecki + Signed-off-by: Kim Phillips + +commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede +Author: Joe Hamman +Date: Thu Aug 9 09:08:18 2007 -0500 + + tsec: Allow Ten Bit Interface address to be configurable + + Allow the address of the Ten Bit Interface (TBI) to be changed in the + event of a conflict with another device. + + Signed-off by: Joe Hamman + +commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c +Author: Jason Jin +Date: Tue Aug 7 16:17:06 2007 +0800 + + Add CONFIG_BIOSEMU define to guard all the bios emulator code + + This patch fix the compile issue on the board that did not enable the bios emulator + +commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053 +Author: Wolfgang Denk +Date: Tue Aug 7 16:02:13 2007 +0200 + + Fix missing brace error in fs/fat/fat.c + [pointed out by Roderik Wildenburg] + + Signed-off-by: Wolfgang Denk + +commit 6c33c78557ca6f8da68c01ce33e278695197d3f4 +Author: Wolfgang Denk +Date: Mon Aug 6 23:21:05 2007 +0200 + + Fixed typo in README (pointed out by Martin Jost). + + Signed-off-by: Wolfgang Denk + +commit 9c7e4b06214db61bb21f1bcbe57c97519669baae +Author: Wolfgang Denk +Date: Mon Aug 6 02:17:36 2007 +0200 + + Coding style cleanup. Update CHANGELOG. + + Signed-off-by: Wolfgang Denk + +commit 221838cc7eb178370ff62aa05920a582e12ac322 +Author: Jason Jin +Date: Tue Jul 10 09:03:22 2007 +0800 + + Remove the bios emulator from MAI board. + + The bios emulator in the MAI board can not pass compile + and have a lot of crap in it. remove it and will have a + clean and small bios emulator in the drivers directory + which can be uesed for every board. + + Signed-off-by: Jason Jin + +commit 5618332409bb96f4448d1712899369fc80c0b489 +Author: Jason Jin +Date: Fri Jul 13 12:14:59 2007 +0800 + + Fix some compile issues for MAI board. + + Signed-off-by: Jason Jin + +commit 0f460a1ee148b648ee242c3157650287d4296260 +Author: Jason Jin +Date: Fri Jul 13 12:14:58 2007 +0800 + + Configurations for ATI video card BIOS emulator + + This patch add definition of the BIOS emulator and the ATI framebuffer + driver for MPC8641HPCN board. + + Signed-off-by: Jason Jin + Signed-off-by: Zhang Wei + +commit ece92f85053b8df613edcf05b26a416cbc3d629c +Author: Jason Jin +Date: Fri Jul 6 08:34:56 2007 +0800 + + This is a BIOS emulator, porting from SciTech for u-boot, mainly for + ATI video card BIOS. and can be used for x86 code emulation by some + modifications. + + Signed-off-by: Jason Jin + +commit 5072188acabde3178fac7f5a597150e6e74fd40c +Author: Jason Jin +Date: Fri Jul 6 08:33:33 2007 +0800 + + This is a framebuffer driver for ATI video card, can work for PCI9200, + X300, X700, X800 ATI video cards. + + Signed-off-by: Zhang Wei + Signed-off-by: Jason Jin + commit 5728be389e65fd47f34b33c2596271eb4db751ae Author: Wolfgang Denk Date: Mon Aug 6 01:01:49 2007 +0200 @@ -42,6 +795,28 @@ Date: Thu Aug 2 14:09:49 2007 -0500 Signed-off-by: Zhang Wei Signed-off-by: Jon Loeliger +commit 86b116b1b1e165ca4840daefed36d2e3b8460173 +Author: Bartlomiej Sieka +Date: Fri Aug 3 12:08:16 2007 +0200 + + cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family. + + Add the ability for modules from the Schindler cm5200 family to use a + single U-Boot image: + - rename cm1_qp1 to cm5200 + - add run-time module detection + - parametrize SDRAM configuration according to the module we are running on + + Few minor, board-specific fixes included in this patch: + - better MAC address handling + - updated default environment ('update' command uses +{filesize} now) + - improved error messages in the auto-update code + - allow booting U-Boot from RAM (CFG_RAMBOOT) + + Signed-off-by: Grzegorz Bernacki + Signed-off-by: Piotr Kruszynski + Signed-off-by: Bartlomiej Sieka + commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779 Author: Andy Fleming Date: Fri Aug 3 04:05:25 2007 -0500 @@ -2027,6 +2802,14 @@ Date: Wed May 23 18:47:48 2007 +0200 Signed-off-by: Detlev Zundel +commit 9b7464a2c88614e1061f509c48930a3d240d1a35 +Author: Jason Jin +Date: Mon Jun 11 15:14:24 2007 +0200 + + USB: This patch fix readl in ohci swap reg access. + + Signed-off-by: Jason Jin + commit 8f8416fada9faf94b9a92f21fe6000643cb521d5 Author: Bartlomiej Sieka Date: Fri Jun 8 14:52:22 2007 +0200 @@ -2062,6 +2845,30 @@ Date: Wed Jun 6 16:26:56 2007 +0200 Signed-off-by: Wolfgang Denk +commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243 +Author: Markus Klotzbuecher +Date: Wed Jun 6 11:49:44 2007 +0200 + + TRAB, USB: update trab board configuration for use of generic ohci driver + +commit dace45acd1c1357daa9322099d07c9a9e08b0024 +Author: Markus Klotzbuecher +Date: Wed Jun 6 11:49:43 2007 +0200 + + USB: ohci fixes and cleanup for ppc4xx and yosemite board. + +commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df +Author: Markus Klotzbuecher +Date: Wed Jun 6 11:49:43 2007 +0200 + + USB: ohci fixes and cleanup for mpc5xxx and IceCube board config + +commit fc43be478f2aa37ce38acd85355038866e4162af +Author: Markus Klotzbuecher +Date: Wed Jun 6 11:49:35 2007 +0200 + + USB/OHCI: endianness cleanup in the generic ohci driver + commit c440bfe6d6d92d66478a7e84402b31f48413617b Author: Stefan Roese Date: Wed Jun 6 11:42:13 2007 +0200 @@ -2082,6 +2889,73 @@ Date: Wed Jun 6 11:42:13 2007 +0200 Signed-off-by: Stefan Roese +commit 18135125f909948b85d1d6881ab4ac0efb4a1c58 +Author: Rodolfo Giometti +Date: Wed Jun 6 10:08:14 2007 +0200 + + Files include/linux/byteorder/{big,little}_endian.h define + __BIG_ENDIAN and __LITTLE_ENDIAN. + + Signed-off-by: Rodolfo Giometti + +commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82 +Author: Zhang Wei +Date: Wed Jun 6 10:08:14 2007 +0200 + + Add USB PCI-OHCI, USB keyboard and event poll support to the + MPC8641HPCN board config file. + + Signed-off-by: Zhang Wei + +commit 4dae14ce8fbdf380017dc54f172218e7d2acc889 +Author: Zhang Wei +Date: Wed Jun 6 10:08:14 2007 +0200 + + USB PCI-OHCI, interrupt pipe and usb event poll support + + This patch added USB PCI-OHCI chips support, interrupt pipe support + and usb event poll support. For supporting the USB interrupt pipe, the + globe urb_priv is moved to purb in ed struct. Now, we can process + several urbs at one time. The interrupt pipe support codes are ported + from Linux kernel 2.4. + + Signed-off-by: Zhang Wei + +commit fdcfaa1b02268b2899e374b35adf936c911a47eb +Author: Zhang Wei +Date: Wed Jun 6 10:08:13 2007 +0200 + + USB event poll support + + This patch adds USB event poll support, which could be used in usbkbd + and other usb devices driver when the asynchronous interrupt + processing is supported. + + Signed-off-by: Zhang Wei +Date: Wed Jun 6 10:08:12 2007 +0200 + + ISP116x: delay for crappy USB keys + + Using some (very) slow USB keys cause the USB host controller buffers + are not ready to be read by the CPU so we need an extra delay before + reading the USB storage data. + + Signed-off-by: Rodolfo Giometti + +commit 09444143670c9c2243cb7aba9f70b3713d33bed1 +Author: Markus Klotzbuecher +Date: Wed Jun 6 10:08:12 2007 +0200 + + Change duplicate usb_cpu_init_fail to usb_board_init_fail + + Thanks to Liew Tsi Chung for pointing + this out. + + Signed-off-by: Markus Klotzbuecher + commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e Author: Ed Swarthout Date: Tue Jun 5 12:30:52 2007 -0500 @@ -2113,6 +2987,35 @@ Date: Mon Jun 4 08:36:05 2007 +0200 Signed-off-by: Benoit Monin Signed-off-by: Stefan Roese +commit 5b1313fb2758ffce8b624457f777d8cc6709608d +Author: Nikita V. Youshchenko +Date: Wed May 23 12:45:19 2007 +0400 + + fix compilation problem for mpc8349itx CFG_RAMBOOT + + Current include/configs/MPC8349ITX.h does contain some support for building + image that will be started from memory (without putting in into flash). + It could be triggered by building with TEXT_BASE set to a low value. + + However, this support is incomplete: using of low TEXT_BASE causes + defining configuration macros in inconsistent way, which later leads + to compilation errors. In particular. flash support is being disabled, + but then flash structures get referenced. + + This patch fixes this, making it possible to build with low TEXT_BASE. + + Signed-Off-By: Nikita Youshchenko + + Signed-off-by: Kim Phillips + +commit 8a364f0970de49949d635e60accf463c6443ef8c +Author: Nikita V. Youshchenko +Date: Wed May 23 12:45:25 2007 +0400 + + add missing 'console' var to default mpc8349itx config + + Signed-off-by: Kim Phillips + commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7 Author: Stefan Roese Date: Fri Jun 1 16:18:17 2007 +0200 @@ -2800,6 +3703,12 @@ Date: Mon May 7 17:11:09 2007 +0200 new: add writing to msr register +commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2 +Author: Markus Klotzbuecher +Date: Mon May 7 16:43:56 2007 +0200 + + Fix an ancient CHANGELOG conflict + commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562 Author: Timur Tabi Date: Sat May 5 08:12:30 2007 +0200 @@ -3496,6 +4405,17 @@ Date: Mon Apr 23 13:54:24 2007 +0200 Signed-off-by: Mike Frysinger +commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459 +Author: Rodolfo Giometti +Date: Mon Apr 23 13:10:52 2007 +0200 + + USB: (Another) delay for crappy USB keys. + + Some USB keys are slow in giving back an answer when the Root HUB + enables power lines. + + Signed-off-by: Rodolfo Giometti + commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 Author: Stefan Roese Date: Mon Apr 23 12:00:22 2007 +0200 @@ -4161,6 +5081,22 @@ Date: Wed Apr 4 01:49:15 2007 +0200 Minor cleanup. +commit 822af351ad2babc7d99033361a5fcacd30f6bc78 +Author: Rodolfo Giometti +Date: Tue Apr 3 14:27:18 2007 +0200 + + Support for the Philips ISP116x HCD (Host Controller Driver) + + Signed-off-by: Rodolfo Giometti + +commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8 +Author: Markus Klotzbuecher +Date: Tue Apr 3 14:27:08 2007 +0200 + + USB: cleanup monahans usb support. Remove dead code. + + Signed-off-by: Markus Klotzbuecher + commit a65c5768e5537530bd1780af3d3fddc3113a163c Author: Stefan Roese Date: Mon Apr 2 10:09:30 2007 +0200 @@ -4330,6 +5266,23 @@ Date: Tue Mar 27 00:32:16 2007 +0200 PATCH: Resolve GPL license problem +commit ae00bb4b2944dc64a485ed72a19754b11af7c223 +Author: Rodolfo Giometti +Date: Mon Mar 26 12:03:36 2007 +0200 + + PXA: pxa27x USB OHCI support + + Signed-off-by: Rodolfo Giometti + +commit ae79f60677c208326535647dcbd5c3ec40dbcb0b +Author: Markus Klotzbuecher +Date: Mon Mar 26 11:21:05 2007 +0200 + + USB: remove the S3C24X0_merge #define, which was introduced while + merging OHCI drivers. + + Signed-off-by: Markus Klotzbuecher + commit 1798049522f594013aea29457d46794298c6ae15 Author: Michal Simek Date: Mon Mar 26 01:39:07 2007 +0200 @@ -6455,6 +7408,34 @@ Date: Mon Nov 27 14:12:17 2006 +0100 Signed-off-by: Stefan Roese +commit 58b485776698c3d71ec5a215e392123b4c15afa3 +Author: Markus Klotzbuecher +Date: Mon Nov 27 11:51:21 2006 +0100 + + Add a small README with information on the generic ohci driver. + +commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f +Author: Markus Klotzbuecher +Date: Mon Nov 27 11:46:46 2006 +0100 + + Fix some endianness issues related to the generic ohci driver + +commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418 +Author: Markus Klotzbuecher +Date: Mon Nov 27 11:44:58 2006 +0100 + + Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able + to choose between the old and the generic OHCI drivers. + +commit 53e336e9ffc51035bdc4e5867631b3378761b4df +Author: Markus Klotzbuecher +Date: Mon Nov 27 11:43:09 2006 +0100 + + Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver + and adapted board configs TQM5200 and yosemite accordingly. This commit + also makes the maximum number of root hub ports configurable + (CFG_USB_OHCI_MAX_ROOT_PORTS). + commit 78d620ebb5871d252270dedfad60c6568993b780 Author: Wolfgang Denk Date: Thu Nov 23 22:58:58 2006 +0100 @@ -8212,6 +9193,12 @@ Date: Tue Jun 27 18:11:54 2006 +0800 Signed-off-by: Jason Jin +commit 99d70e3a47affb9bae041a2caece7cd516e213b3 +Author: Wolfgang Denk +Date: Mon Jun 26 11:06:00 2006 +0200 + + More code cleanup + commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba Author: Jon Loeliger Date: Thu Jun 22 08:51:46 2006 -0500 @@ -8236,6 +9223,28 @@ Date: Thu Jun 15 21:33:37 2006 -0500 Signed-off-by: Jon Loeliger +commit 386eda022473394ad8f36b86f2bdc9b4cb816291 +Author: Wolfgang Denk +Date: Wed Jun 14 18:14:56 2006 +0200 + + Code cleanup + +commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70 +Author: Wolfgang Denk +Date: Wed Jun 14 17:45:53 2006 +0200 + + Various USB related patches + - Add support for mpc8xx USB device. + - Add support for Common Device Class - Abstract Control Model USB console. + - Add support for flow control in USB slave devices. + - Add support for switching between gserial and cdc_acm using environment. + - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h + - Update usbcore slightly to ease host enumeration. + - Fix non-portable endian problems in usbdcore and usbdcore_ep0. + - Add AdderUSB_config as a defconfig to enable usage of the USB console + by default with the Adder87x U-Boot port. + Patches by Bryan O'Donoghue , 29 May 2006 + commit 8ecc971618f56029ad99d3516f8b297a6ed58971 Author: Jon Loeliger Date: Wed Jun 7 10:53:55 2006 -0500 @@ -8314,6 +9323,12 @@ Date: Tue May 30 17:47:00 2006 -0500 Signed-off-by: Jon Loeliger +commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9 +Author: Markus Klotzbuecher +Date: Tue May 30 16:56:14 2006 +0200 + + Support generic OHCI support for the s3c24x0 cpu. + commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8 Author: Haiying Wang Date: Tue May 30 09:10:32 2006 -0500 @@ -8363,6 +9378,29 @@ Date: Fri May 26 10:01:16 2006 -0500 Signed-off-by: Jon Loeliger +commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc +Author: Markus Klotzbuecher +Date: Tue May 23 13:38:35 2006 +0200 + + Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some + fixes to the latter. + +commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9 +Author: Markus Klotzbuecher +Date: Tue May 23 10:33:11 2006 +0200 + + More cleanup for the delta board and the generic usb_ohci driver. Added + CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific + initialization and cleanup hooks respectively. + +commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10 +Author: Markus Klotzbuecher +Date: Mon May 22 16:33:54 2006 +0200 + + This patch adds USB storage support for the delta board. This is the first + board to make use of a generic OHCI driver, that calls hooks for board + dependant initialization. + commit 14e37081ff3cac7ebe6e93836523429853b6b292 Author: Jon Loeliger Date: Fri May 19 13:28:39 2006 -0500 -- 2.25.1