From 98e69567022eb2138dd99554b3a2e80522a1b153 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Sat, 4 Dec 2010 08:34:04 +0100 Subject: [PATCH] mpc52xx: add support for tqm52xx based board charon - serial console in PSC1 - 128MiB DRAM - 32MiB Flash - FEC Ethernet - 2 I2C busses - FPGA on CS3 - IDE - VGA SMI501 Signed-off-by: Heiko Schocher Signed-off-by: Wolfgang Denk --- MAINTAINERS | 1 + board/tqc/tqm5200/tqm5200.c | 170 +++++++++++++++++++++++++++++++++++- boards.cfg | 1 + include/configs/TQM5200.h | 26 ++++-- include/configs/charon.h | 80 +++++++++++++++++ 5 files changed, 268 insertions(+), 10 deletions(-) create mode 100644 include/configs/charon.h diff --git a/MAINTAINERS b/MAINTAINERS index 986e0dc614..fc6bae9049 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -414,6 +414,7 @@ Georg Schardt Heiko Schocher + charon MPC5200 ids8247 MPC8247 jupiter MPC5200 kmeter1 MPC8360 diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c index 263a2af9b4..7cbcd433ea 100644 --- a/board/tqc/tqm5200/tqm5200.c +++ b/board/tqc/tqm5200/tqm5200.c @@ -54,6 +54,47 @@ DECLARE_GLOBAL_DATA_PTR; void ps2mult_early_init(void); #endif +#if defined(CONFIG_VIDEO) +/* + * EDID block has been generated using Phoenix EDID Designer 1.3. + * This tool creates a text file containing: + * + * EDID BYTES: + * + * 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F + * ------------------------------------------------ + * 00 | 00 FF FF FF FF FF FF 00 04 21 00 00 00 00 00 00 + * 10 | 01 00 01 03 00 00 00 00 00 00 00 00 00 00 00 00 + * 20 | 00 00 00 21 00 00 01 01 01 01 01 01 01 01 01 01 + * 30 | 01 01 01 01 01 01 64 00 00 00 00 00 00 00 00 00 + * 40 | 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 + * 50 | 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 + * 60 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 + * 70 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 17 + * + * Then this data has been manually converted to the char + * array below. + */ +static unsigned char edid_buf[128] = { + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, + 0x04, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x01, 0x03, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x64, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x17, +}; +#endif + #ifndef CONFIG_SYS_RAMBOOT static void sdram_start (int hi_addr) { @@ -251,6 +292,8 @@ int checkboard (void) # define CARRIER_NAME "CAM5200" #elif defined(CONFIG_FO300) # define CARRIER_NAME "FO300" +#elif defined(CONFIG_CHARON) +# define CARRIER_NAME "CHARON" #else # error "UNKNOWN" #endif @@ -429,6 +472,111 @@ int board_early_init_f (void) } #endif /* CONFIG_FO300 */ +#if defined(CONFIG_CHARON) +#include +#include + +/* The TFP410 registers */ +#define TFP410_REG_VEN_ID_L 0x00 +#define TFP410_REG_VEN_ID_H 0x01 +#define TFP410_REG_DEV_ID_L 0x02 +#define TFP410_REG_DEV_ID_H 0x03 +#define TFP410_REG_REV_ID 0x04 + +#define TFP410_REG_CTL_1_MODE 0x08 +#define TFP410_REG_CTL_2_MODE 0x09 +#define TFP410_REG_CTL_3_MODE 0x0A + +#define TFP410_REG_CFG 0x0B + +#define TFP410_REG_DE_DLY 0x32 +#define TFP410_REG_DE_CTL 0x33 +#define TFP410_REG_DE_TOP 0x34 +#define TFP410_REG_DE_CNT_L 0x36 +#define TFP410_REG_DE_CNT_H 0x37 +#define TFP410_REG_DE_LIN_L 0x38 +#define TFP410_REG_DE_LIN_H 0x39 + +#define TFP410_REG_H_RES_L 0x3A +#define TFP410_REG_H_RES_H 0x3B +#define TFP410_REG_V_RES_L 0x3C +#define TFP410_REG_V_RES_H 0x3D + +static int tfp410_read_reg(int reg, uchar *buf) +{ + if (i2c_read(CONFIG_SYS_TFP410_ADDR, reg, 1, buf, 1) != 0) { + puts ("Error reading the chip.\n"); + return 1; + } + return 0; +} + +static int tfp410_write_reg(int reg, uchar buf) +{ + if (i2c_write(CONFIG_SYS_TFP410_ADDR, reg, 1, &buf, 1) != 0) { + puts ("Error writing the chip.\n"); + return 1; + } + return 0; +} + +typedef struct _tfp410_config { + int reg; + uchar val; +}TFP410_CONFIG; + +static TFP410_CONFIG tfp410_configtbl[] = { + {TFP410_REG_CTL_1_MODE, 0x37}, + {TFP410_REG_CTL_2_MODE, 0x20}, + {TFP410_REG_CTL_3_MODE, 0x80}, + {TFP410_REG_DE_DLY, 0x90}, + {TFP410_REG_DE_CTL, 0x00}, + {TFP410_REG_DE_TOP, 0x23}, + {TFP410_REG_DE_CNT_H, 0x02}, + {TFP410_REG_DE_CNT_L, 0x80}, + {TFP410_REG_DE_LIN_H, 0x01}, + {TFP410_REG_DE_LIN_L, 0xe0}, + {-1, 0}, +}; + +static int charon_last_stage_init(void) +{ + volatile struct mpc5xxx_lpb *lpb = + (struct mpc5xxx_lpb *) MPC5XXX_LPB; + int oldbus = i2c_get_bus_num(); + uchar buf; + int i = 0; + + i2c_set_bus_num(CONFIG_SYS_TFP410_BUS); + + /* check version */ + if (tfp410_read_reg(TFP410_REG_DEV_ID_H, &buf) != 0) + return -1; + if (!(buf & 0x04)) + return -1; + if (tfp410_read_reg(TFP410_REG_DEV_ID_L, &buf) != 0) + return -1; + if (!(buf & 0x10)) + return -1; + /* OK, now init the chip */ + while (tfp410_configtbl[i].reg != -1) { + int ret; + + ret = tfp410_write_reg(tfp410_configtbl[i].reg, + tfp410_configtbl[i].val); + if (ret != 0) + return -1; + i++; + } + printf("TFP410 initialized.\n"); + i2c_set_bus_num(oldbus); + + /* set deadcycle for cs3 to 0 */ + setbits_be32(&lpb->cs_deadcycle, 0xffffcfff); + return 0; +} +#endif + int last_stage_init (void) { /* @@ -530,6 +678,9 @@ int last_stage_init (void) #endif #endif /* !CONFIG_TQM5200S */ +#if defined(CONFIG_CHARON) + charon_last_stage_init(); +#endif return 0; } @@ -625,8 +776,12 @@ void video_get_info_str (int line_number, char *info) { if (line_number == 1) { strcpy (info, " Board: TQM5200 (TQ-Components GmbH)"); -#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || defined(CONFIG_FO300) +#if defined (CONFIG_CHARON) || defined (CONFIG_FO300) || \ + defined(CONFIG_STK52XX) || defined(CONFIG_TB5200) } else if (line_number == 2) { +#if defined (CONFIG_CHARON) + strcpy (info, " on a CHARON carrier board"); +#endif #if defined (CONFIG_STK52XX) strcpy (info, " on a STK52xx carrier board"); #endif @@ -726,9 +881,22 @@ int board_get_height (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); +#if defined(CONFIG_VIDEO) + fdt_add_edid(blob, "smi,sm501", edid_buf); +#endif } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#if defined(CONFIG_RESET_PHY_R) +#include + +void reset_phy(void) +{ + /* init Micrel KSZ8993 PHY */ + miiphy_write("FEC", CONFIG_PHY_ADDR, 0x01, 0x09); +} +#endif + int board_eth_init(bd_t *bis) { cpu_eth_init(bis); /* Built in FEC comes first */ diff --git a/boards.cfg b/boards.cfg index 6da9959a0b..6258eb2322 100644 --- a/boards.cfg +++ b/boards.cfg @@ -294,6 +294,7 @@ pcm030_LOWBOOT powerpc mpc5xxx pcm030 phytec aev powerpc mpc5xxx tqm5200 tqc cam5200 powerpc mpc5xxx tqm5200 tqc - TQM5200:CAM5200,TQM5200S,TQM5200_B cam5200_niosflash powerpc mpc5xxx tqm5200 tqc - TQM5200:CAM5200,TQM5200S,TQM5200_B,CAM5200_NIOSFLASH +charon powerpc mpc5xxx tqm5200 tqc - charon fo300 powerpc mpc5xxx tqm5200 tqc - TQM5200:FO300 MiniFAP powerpc mpc5xxx tqm5200 tqc - TQM5200:MINIFAP TB5200 powerpc mpc5xxx tqm5200 tqc diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index c2f6b8a7b3..e822a5939c 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -49,7 +49,8 @@ #endif /* On a Cameron or on a FO300 board or ... */ -#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) +#if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \ + && !defined(CONFIG_FO300) #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ #endif @@ -79,7 +80,7 @@ /* switch is open */ #endif /* CONFIG_FO300 */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ #define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ @@ -92,7 +93,7 @@ * 0x40000000 - 0x4fffffff - PCI Memory * 0x50000000 - 0x50ffffff - PCI IO Space */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ @@ -140,7 +141,8 @@ #define CONFIG_ISO_PARTITION /* USB */ -#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ + defined(CONFIG_STK52XX) #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_OHCI_BE_CONTROLLER #define CONFIG_USB_STORAGE @@ -204,13 +206,15 @@ #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #endif -#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ + defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) #define CONFIG_CMD_IDE #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 #endif -#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ + defined(CONFIG_STK52XX) #define CONFIG_CFG_USB #define CONFIG_CFG_FAT #endif @@ -291,7 +295,9 @@ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ "console=${console},${baudrate}\0" \ - "flash_self_old=sete console ttyS0; run ramargs addip addcons;" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "flash_self_old=sete console ttyS0; " \ + "run ramargs addip addcons addmtd; " \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ @@ -303,7 +309,7 @@ "sete console ttyS0; run nfsargs addip addcons;bootm\0" \ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addcons; " \ + "run nfsargs addip addcons addmtd; " \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ CUSTOM_ENV_SETTINGS \ "load=tftp 200000 ${u-boot}\0" \ @@ -420,7 +426,7 @@ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define MTDIDS_DEFAULT "nor0=TQM5200-0" -#ifdef CONFIG_STK52XX +#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) # if defined(CONFIG_TQM5200_B) # if defined(CONFIG_SYS_LOWBOOT) # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \ @@ -566,6 +572,7 @@ * use PSC1: Bits 29-31 (mask: 0x00000007): * 100 -> UART (on all boards). */ +#if !defined(CONFIG_SYS_GPS_PORT_CONFIG) #if defined (CONFIG_MINIFAP) # define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004 #elif defined (CONFIG_STK52XX) @@ -585,6 +592,7 @@ #else /* TMQ5200 Inbetriebnahme-Board */ # define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004 #endif +#endif /* * RTC configuration diff --git a/include/configs/charon.h b/include/configs/charon.h new file mode 100644 index 0000000000..80a273c7e1 --- /dev/null +++ b/include/configs/charon.h @@ -0,0 +1,80 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2006 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_CHARON_H +#define __CONFIG_CHARON_H + +#define CONFIG_CHARON +#define CONFIG_HOSTNAME charon + +#define CONFIG_SYS_GPS_PORT_CONFIG 0x81550414 + +/* include common defines/options for TQM52xx boards */ +#include "TQM5200.h" + +/* defines special on charon board */ +#undef CONFIG_RTC_MPC5200 +#undef CONFIG_CMD_DATE + +#undef CUSTOM_ENV_SETTINGS +#define CUSTOM_ENV_SETTINGS \ + "bootfile=/tftpboot/charon/uImage\0" \ + "fdt_file=/tftpboot/charon/charon.dtb\0" \ + "u-boot=/tftpboot/charon/u-boot.bin\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" + + +/* additional features on charon board */ +#define CONFIG_RESET_PHY_R + +/* + * I2C configuration + */ +#define CONFIG_I2C_MULTI_BUS + +#define CONFIG_SYS_TFP410_ADDR 0x38 +#define CONFIG_SYS_TFP410_BUS 0 + +/* + * FPGA configuration + */ +#define CONFIG_SYS_CS3_START 0xE8000000 +#define CONFIG_SYS_CS3_SIZE 0x80000 /* 512 KByte */ + +/* + * CS3 Config Register Init: + * CS3 Enabled + * AddrBus: 8bits + * DataBus: 4bytes + * Multiplexed: Yes + * MuxBank: 00 + */ +#define CONFIG_SYS_CS3_CFG 0x00009310 + +#endif /* __CONFIG_CHARON_H */ -- 2.25.1