From 988546cd136aab66493ab5564601b25164fb6ecb Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 29 Feb 2020 16:36:21 +0100 Subject: [PATCH] ipq40xx: Remove kernel 4.14 support This target was switched to kernel 4.19 more than 6 months ago in commit f342ffd300da ("treewide: kernel: bump some targets to 4.19") and now with kernel 5.4 support being added it gets harder to support kernel 4.14 in addition to kernel 4.19 and 5.4. Signed-off-by: Hauke Mehrtens --- target/linux/ipq40xx/config-4.14 | 485 -- .../arch/arm/boot/dts/qcom-ipq4018-a42.dts | 215 - .../arm/boot/dts/qcom-ipq4018-ap120c-ac.dts | 344 -- .../arm/boot/dts/qcom-ipq4018-ea6350v3.dts | 273 - .../arm/boot/dts/qcom-ipq4018-eap1300.dts | 231 - .../arm/boot/dts/qcom-ipq4018-ens620ext.dts | 261 - .../arm/boot/dts/qcom-ipq4018-ex6100v2.dts | 33 - .../arm/boot/dts/qcom-ipq4018-ex6150v2.dts | 33 - .../arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi | 307 -- .../boot/dts/qcom-ipq4018-fritzbox-4040.dts | 289 -- .../arm/boot/dts/qcom-ipq4018-jalapeno.dts | 266 - .../arm/boot/dts/qcom-ipq4018-nbg6617.dts | 335 -- .../arm/boot/dts/qcom-ipq4018-rt-ac58u.dts | 304 -- .../arm/boot/dts/qcom-ipq4018-wre6606.dts | 261 - .../arch/arm/boot/dts/qcom-ipq4019-a62.dts | 239 - .../boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 21 - .../arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 177 - .../arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts | 80 - .../arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts | 115 - .../arm/boot/dts/qcom-ipq4019-e2600ac.dtsi | 262 - .../arch/arm/boot/dts/qcom-ipq4019-ea8300.dts | 399 -- .../boot/dts/qcom-ipq4019-fritzbox-7530.dts | 299 -- .../dts/qcom-ipq4019-fritzrepeater-1200.dts | 262 - .../dts/qcom-ipq4019-fritzrepeater-3000.dts | 260 - .../arm/boot/dts/qcom-ipq4019-map-ac2200.dts | 306 -- .../arch/arm/boot/dts/qcom-ipq4028-wpj428.dts | 268 - .../arm/boot/dts/qcom-ipq4029-gl-b1300.dts | 278 - .../arch/arm/boot/dts/qcom-ipq4029-mr33.dts | 394 -- ...ndard-large-page-OOB-layout-when-usi.patch | 47 - ...ual-return-values-for-the-erase-hook.patch | 48 - ...am-Process-multiple-pending-descript.patch | 409 -- ...d-command-elements-in-BAM-transactio.patch | 89 - ...pport-for-command-descriptor-formati.patch | 201 - ...-several-helpers-to-do-common-NAND-o.patch | 1586 ------ ...rivers-to-explicitly-send-READ-PROG-.patch | 94 - .../070-qcom-spm-fix-probe-order.patch | 26 - ...use-v2-of-the-kpss-bringup-mechanism.patch | 109 - ...-cpu-operating-points-for-cpufreq-su.patch | 89 - ...074-ARM-qcom-Add-IPQ4019-SoC-support.patch | 36 - ...qcom-ipq4019-usb-add-binding-documen.patch | 38 - ...4019-usb-add-driver-for-QCOM-IPQ4019.patch | 233 - ...com-ipq4019-add-USB-devicetree-nodes.patch | 123 - ...s-ipq4019-Add-a-few-peripheral-nodes.patch | 278 - .../079-ARM-dts-ipq4019-fix-PCI-range.patch | 23 - ...msm-fix-gpio-hog-related-boot-issues.patch | 71 - .../081-clk-fix-apss-cpu-overclocking.patch | 115 - ...019-Add-TZ-and-SMEM-reserved-regions.patch | 88 - ...nd-add-Winbond-manufacturer-and-chip.patch | 38 - ...ts-ipq4019-Add-a-default-chosen-node.patch | 45 - ...5-mtd-nand-add-macronix-mx35lf1ge4ab.patch | 13 - ...-qcom-ipq4019-enlarge-PCIe-BAR-range.patch | 42 - ...RM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch | 32 - ...rights-and-update-to-SPDX-identifier.patch | 36 - ...inor-code-reorganization-for-use_dma.patch | 76 - ...redundant-variables-for-BAM-SG-count.patch | 174 - ...-EOT-and-FLUSH-tags-at-the-end-of-tr.patch | 126 - ...transfer-length-for-BAM-RX-EOT-FLUSH.patch | 33 - ...rror-handling-for-i2c-error-in-BAM-m.patch | 90 - ...complete-transfer-length-to-choose-D.patch | 54 - ...ompletion-timeout-according-to-trans.patch | 61 - ...er-overflow-for-multiple-msg-of-maxi.patch | 311 -- ...end-NACK-for-last-read-sub-transfers.patch | 43 - ...zation-of-driver-code-to-remove-poll.patch | 579 --- ...zation-of-driver-code-to-remove-poll.patch | 1154 ----- ...90-ipq40xx-fix-high-resolution-timer.patch | 29 - ...add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch | 31 - ...or-enable-4B-opcodes-for-mx25l25635f.patch | 62 - .../700-net-add-qualcomm-mdio-and-phy.patch | 2685 ---------- .../701-dts-ipq4019-add-mdio-node.patch | 52 - ...702-dts-ipq4019-add-PHY-switch-nodes.patch | 46 - ...4019-needs-rfs-vlan_tag-callbacks-in.patch | 53 - ...706-ar40xx-abort-probe-on-missig-phy.patch | 23 - ...add-qualcomm-essedma-ethernet-driver.patch | 4578 ----------------- ...ts-ipq4019-add-ethernet-essedma-node.patch | 92 - .../patches-4.14/712-mr33-essedma.patch | 340 -- .../713-essedma-alloc-skb-ip-align.patch | 21 - ...ssedma-add-fix-for-memory-allocation.patch | 197 - .../850-soc-add-qualcomm-syscon.patch | 177 - .../900-dts-ipq4019-ap-dk01.1.patch | 157 - .../901-arm-boot-add-dts-files.patch | 44 - .../997-device_tree_cmdline.patch | 12 - 81 files changed, 22206 deletions(-) delete mode 100644 target/linux/ipq40xx/config-4.14 delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts delete mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts delete mode 100644 target/linux/ipq40xx/patches-4.14/030-mtd-nand-Use-standard-large-page-OOB-layout-when-usi.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/031-mtd-nand-use-usual-return-values-for-the-erase-hook.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/050-0002-mtd-nand-qcom-add-command-elements-in-BAM-transactio.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/050-0003-mtd-nand-qcom-support-for-command-descriptor-formati.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/050-0004-mtd-nand-provide-several-helpers-to-do-common-NAND-o.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/050-0005-mtd-nand-force-drivers-to-explicitly-send-READ-PROG-.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/085-mtd-nand-add-macronix-mx35lf1ge4ab.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/086-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/087-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0001-i2c-qup-fix-copyrights-and-update-to-SPDX-identifier.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0003-i2c-qup-minor-code-reorganization-for-use_dma.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0004-i2c-qup-remove-redundant-variables-for-BAM-SG-count.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0005-i2c-qup-schedule-EOT-and-FLUSH-tags-at-the-end-of-tr.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0006-i2c-qup-fix-the-transfer-length-for-BAM-RX-EOT-FLUSH.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0007-i2c-qup-proper-error-handling-for-i2c-error-in-BAM-m.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0008-i2c-qup-use-the-complete-transfer-length-to-choose-D.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0009-i2c-qup-change-completion-timeout-according-to-trans.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0010-i2c-qup-fix-buffer-overflow-for-multiple-msg-of-maxi.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0011-i2c-qup-send-NACK-for-last-read-sub-transfers.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/088-0013-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/090-ipq40xx-fix-high-resolution-timer.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/181-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/700-net-add-qualcomm-mdio-and-phy.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/706-ar40xx-abort-probe-on-missig-phy.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/710-net-add-qualcomm-essedma-ethernet-driver.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/712-mr33-essedma.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/713-essedma-alloc-skb-ip-align.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/714-essedma-add-fix-for-memory-allocation.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/850-soc-add-qualcomm-syscon.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch delete mode 100644 target/linux/ipq40xx/patches-4.14/997-device_tree_cmdline.patch diff --git a/target/linux/ipq40xx/config-4.14 b/target/linux/ipq40xx/config-4.14 deleted file mode 100644 index c72e693206..0000000000 --- a/target/linux/ipq40xx/config-4.14 +++ /dev/null @@ -1,485 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APQ_GCC_8084 is not set -# CONFIG_APQ_MMCC_8084 is not set -CONFIG_AR40XX_PHY=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_IPQ40XX=y -# CONFIG_ARCH_MDM9615 is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_ARCH_MSM8960 is not set -# CONFIG_ARCH_MSM8974 is not set -# CONFIG_ARCH_MSM8X60 is not set -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_QCOM=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_CPUIDLE=y -CONFIG_ARM_CPU_SUSPEND=y -# CONFIG_ARM_CPU_TOPOLOGY is not set -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_SMMU is not set -# CONFIG_ARM_SP805_WATCHDOG is not set -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_AT803X_PHY=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_QCOM=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_QCE=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CRYPTO_XTS=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_UART_8250 is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_DT_IDLE_STATES=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EEPROM_AT24=y -CONFIG_ESSEDMA=y -CONFIG_EXTCON=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_WATCHDOG=y -# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set -# CONFIG_GRO_CELLS is not set -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_HAVE_ARM_SMCCC=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HWSPINLOCK=y -CONFIG_HWSPINLOCK_QCOM=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MSM=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_QUP=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -CONFIG_IPQ_GCC_4019=y -# CONFIG_IPQ_GCC_806X is not set -# CONFIG_IPQ_GCC_8074 is not set -# CONFIG_IPQ_LCC_806X is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_LEDS_LP5523=y -CONFIG_LEDS_LP5562=y -CONFIG_LEDS_LP55XX_COMMON=y -CONFIG_LIBFDT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_GPIO=y -CONFIG_MDIO_IPQ40XX=y -# CONFIG_MDM_GCC_9615 is not set -# CONFIG_MDM_LCC_9615 is not set -# CONFIG_MFD_QCOM_RPM is not set -# CONFIG_MFD_SPMI_PMIC is not set -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MSM_GCC_8660 is not set -# CONFIG_MSM_GCC_8916 is not set -# CONFIG_MSM_GCC_8960 is not set -# CONFIG_MSM_GCC_8974 is not set -# CONFIG_MSM_GCC_8994 is not set -# CONFIG_MSM_GCC_8996 is not set -# CONFIG_MSM_LCC_8960 is not set -# CONFIG_MSM_MMCC_8960 is not set -# CONFIG_MSM_MMCC_8974 is not set -# CONFIG_MSM_MMCC_8996 is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_QCOM=y -CONFIG_MTD_SPINAND_MT29F=y -CONFIG_MTD_SPINAND_ONDIEECC=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_QCA8K=y -CONFIG_NET_DSA_TAG_QCA=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NO_BOOTMEM=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OPTEE=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCIE_QCOM=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_PHY_QCOM_APQ8064_SATA is not set -CONFIG_PHY_QCOM_IPQ4019_USB=y -# CONFIG_PHY_QCOM_IPQ806X_SATA is not set -# CONFIG_PHY_QCOM_QMP is not set -# CONFIG_PHY_QCOM_QUSB2 is not set -# CONFIG_PHY_QCOM_UFS is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_APQ8084 is not set -CONFIG_PINCTRL_IPQ4019=y -# CONFIG_PINCTRL_IPQ8064 is not set -# CONFIG_PINCTRL_IPQ8074 is not set -# CONFIG_PINCTRL_MDM9615 is not set -CONFIG_PINCTRL_MSM=y -# CONFIG_PINCTRL_MSM8660 is not set -# CONFIG_PINCTRL_MSM8916 is not set -# CONFIG_PINCTRL_MSM8960 is not set -# CONFIG_PINCTRL_MSM8994 is not set -# CONFIG_PINCTRL_MSM8996 is not set -# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set -# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_MSM=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PRINTK_TIME=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_QCOM_BAM_DMA=y -# CONFIG_QCOM_EBI2 is not set -# CONFIG_QCOM_GSBI is not set -# CONFIG_QCOM_IOMMU is not set -CONFIG_QCOM_PM=y -CONFIG_QCOM_QFPROM=y -CONFIG_QCOM_SCM=y -CONFIG_QCOM_SCM_32=y -CONFIG_QCOM_SMEM=y -# CONFIG_QCOM_SMP2P is not set -# CONFIG_QCOM_SMSM is not set -CONFIG_QCOM_TCSR=y -# CONFIG_QCOM_TSENS is not set -CONFIG_QCOM_WDT=y -# CONFIG_QRTR is not set -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_QCOM_SPMI is not set -CONFIG_REGULATOR_VCTRL=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -# CONFIG_RPMSG_QCOM_SMD is not set -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_SCHED_INFO is not set -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_FSL=y -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_QUP=y -CONFIG_SPMI=y -CONFIG_SPMI_MSM_PMIC_ARB=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TEE=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB=y -CONFIG_USB_COMMON=y -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_QCOM_8X16_PHY is not set -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VDSO=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts deleted file mode 100644 index 288b38879f..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ /dev/null @@ -1,215 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "OpenMesh A42"; - compatible = "openmesh,a42", "qcom,ipq4019"; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - red { - label = "a42:red:status"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - - power: green { - label = "a42:green:status"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "a42:blue:status"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - /* hw_margin_ms is actually 300s but driver limits it to 60s */ - hw_margin_ms = <60000>; - always-running; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - /* partitions are passed via bootloader */ - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts deleted file mode 100644 index a27bdcd88b..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ /dev/null @@ -1,344 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ALFA Network AP120C-AC"; - compatible = "alfa-network,ap120c-ac", "qcom,ipq4019"; - - aliases { - led-boot = &status; - led-failsafe = &status; - led-running = &status; - led-upgrade = &status; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - status: status { - label = "ap120c-ac:blue:status"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - wan { - label = "ap120c-ac:amber:wan"; - gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "ap120c-ac:green:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "ap120c-ac:red:wlan5g"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - }; - - soc { - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - phys = <&usb3_hs_phy>; - phy-names = "usb2-phy"; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qca8075: ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - #gpio-cells = <2>; - gpio-controller; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c3 { - status = "okay"; - - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - tpm@29 { - compatible = "atmel,at97sc3204t"; - reg = <0x29>; - }; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 4 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - }; - - partition@f0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition@180000 { - label = "priv_data1"; - reg = <0x00180000 0x00010000>; - read-only; - }; - - partition@190000 { - label = "priv_data2"; - reg = <0x00190000 0x00010000>; - read-only; - }; - }; - }; - - nand@1 { - compatible = "spinand,mt29f"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs1"; - reg = <0x00000000 0x04000000>; - }; - - partition@4000000 { - label = "rootfs2"; - reg = <0x04000000 0x04000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial0_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,forced_duplex = <1>; - qcom,forced_speed = <1000>; - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - vlan_tag = <1 0x10>; -}; - -&gmac1 { - qcom,forced_duplex = <1>; - qcom,forced_speed = <1000>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - vlan_tag = <2 0x20>; -}; - -&tlmm { - i2c0_pins: i2c0_pinmux { - mux_i2c { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - drive-strength = <16>; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_mdio { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_mdc { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial0_pins: serial0_pinmux { - mux_uart { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi0_pins: spi0_pinmux { - mux_spi { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio4"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts deleted file mode 100644 index f27aa68d2a..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts +++ /dev/null @@ -1,273 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Linksys EA6350v3"; - compatible = "linksys,ea6350v3", "qcom,ipq4019"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: status { - label = "EA6350v3:green:status"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea6350v3"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea6350v3"; -}; - - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - MBIB@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - QSEE@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - CDT@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - APPSBLENV@d0000 { - label = "APPSBLENV"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - APPSBL@e0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000e0000 0x00080000>; - read-only; - }; - ART@160000 { - label = "ART"; - reg = <0x00160000 0x00010000>; - read-only; - }; - u_env@170000 { - label = "u_env"; - reg = <0x00170000 0x00020000>; - }; - s_env@190000 { - label = "s_env"; - reg = <0x00190000 0x00020000>; - }; - devinfo@1b0000 { - label = "devinfo"; - reg = <0x001b0000 0x00010000>; - }; - /* 0x001c0000 - 0x00200000 unused */ - }; - }; - - flash@1 { - status = "okay"; - compatible = "spinand,mt29f", "w25n01gv"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - kernel@0 { - label = "kernel"; - reg = <0x00000000 0x02800000>; - }; - rootfs@300000 { - label = "rootfs"; - reg = <0x00300000 0x02500000>; - }; - alt_kernel@2800000 { - label = "alt_kernel"; - reg = <0x02800000 0x02800000>; - }; - alt_rootfs@2b00000 { - label = "alt_rootfs"; - reg = <0x02b00000 0x02500000>; - }; - sysdiag@5000000 { - label = "sysdiag"; - reg = <0x05000000 0x00100000>; - }; - syscfg@5100000 { - label = "syscfg"; - reg = <0x05100000 0x02F00000>; - }; - /* 0x00000000 - 0x08000000: 128 MiB */ - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts deleted file mode 100644 index 68598ea8df..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts +++ /dev/null @@ -1,231 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EnGenius EAP1300"; - compatible = "engenius,eap1300", "qcom,ipq4019"; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - power: orange { - label = "eap1300:orange:power"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "eap1300:blue:lan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - - mesh { - label = "eap1300:blue:mesh"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "eap1300:blue:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "eap1300:yellow:wlan5g"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00090000>; - read-only; - }; - partition7@180000 { - label = "0:ART"; - reg = <0x00180000 0x00010000>; - read-only; - }; - partition8@190000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x190000 0x1dc0000>; - }; - partition9@1f50000 { - label = "u-boot-env"; - reg = <0x01f50000 0x00010000>; - }; - partition10@1f60000 { - label = "userconfig"; - reg = <0x01f60000 0x000a0000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - vlan_tag = <2 0x20>; -}; - -&gmac1 { - vlan_tag = <1 0x10>; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts deleted file mode 100644 index 34ca133728..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts +++ /dev/null @@ -1,261 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EnGenius ENS620EXT"; - compatible = "engenius,ens620ext"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - /* - * Disable the broken restart as a workaround for the buggy - * 3.0.0/3.0.1 U-boots that ship with the device. - * Note: The watchdog is now used to restart this device. - */ - restart@4ab000 { - status = "disabled"; - }; - }; - - buttons { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - label = "ens620ext:amber:power"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "ens620ext:green:lan1"; - gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "ens620ext:green:lan2"; - gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - }; - - wlan2G { - label = "ens620ext:green:wlan2G"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan5G { - label = "ens620ext:green:wlan5G"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00090000>; - read-only; - }; - partition@180000 { - label = "ART"; - reg = <0x00180000 0x00010000>; - read-only; - }; - partition@190000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00190000 0x14d0000>; - }; - partition@1660000 { - label = "failsafe"; - reg = <0x01660000 0x008f0000>; - read-only; - }; - partition@1f50000 { - label = "u-boot-env"; - reg = <0x01f50000 0x00010000>; - read-only; - }; - partition@1f60000 { - label = "userconfig"; - reg = <0x01f60000 0x000a0000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts deleted file mode 100644 index a0abe41517..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4018-ex61x0v2.dtsi" -#include -#include - -/ { - model = "Netgear EX6100v2"; - compatible = "netgear,ex6100v2", "qcom,ipq4019"; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; -}; - -&wifi1 { - qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts deleted file mode 100644 index e0b5c38b33..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4018-ex61x0v2.dtsi" -#include -#include - -/ { - model = "Netgear EX6150v2"; - compatible = "netgear,ex6150v2", "qcom,ipq4019"; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; -}; - -&wifi1 { - qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi deleted file mode 100644 index 636e42e8b1..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi +++ /dev/null @@ -1,307 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Netgear EX61X0v2"; - compatible = "netgear,ex61x0v2", "qcom,ipq4019"; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - aliases { - led-boot = &power_amber; - led-failsafe = &power_amber; - led-running = &power_green; - led-upgrade = &power_amber; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - gpio-sck = <&tlmm 5 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&tlmm 4 GPIO_ACTIVE_HIGH>; - num-chipselects = <0>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <1>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_amber: power_amber { - label = "ex61x0v2:amber:power"; - gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; - }; - - power_green: power_green { - label = "ex61x0v2:green:power"; - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - }; - - right { - label = "ex61x0v2:blue:right"; - gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; - }; - - left { - label = "ex61x0v2:blue:left"; - gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; - }; - - client_green { - label = "ex61x0v2:green:client"; - gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; - }; - - client_red { - label = "ex61x0v2:red:client"; - gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; - }; - - router_green { - label = "ex61x0v2:green:router"; - gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; - }; - - router_red { - label = "ex61x0v2:red:router"; - gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "ex61x0v2:green:wps"; - gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l12805d@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition8@180000 { - label = "config"; - reg = <0x00180000 0x00010000>; - read-only; - }; - - partition9@190000 { - label = "pot"; - reg = <0x00190000 0x00010000>; - read-only; - }; - - partition10@1a0000 { - label = "dnidata"; - reg = <0x001a0000 0x00010000>; - read-only; - }; - - partition11@1b0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x001b0000 0x00e10000>; - }; - - partition12@fc0000 { - label = "language"; - reg = <0x00fc0000 0x00040000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts deleted file mode 100644 index 9576e14f25..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts +++ /dev/null @@ -1,289 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Box 4040"; - compatible = "avm,fritzbox-4040", "qcom,ipq4019"; - - aliases { - led-boot = &power; - led-failsafe = &flash; - led-running = &power; - led-upgrade = &flash; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qca8075: ess-switch@c000000 { - status = "okay"; - - #gpio-cells = <2>; - gpio-controller; - - enable-usb-power { - gpio-hog; - line-name = "enable USB3 power"; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-high; - }; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - switch-leds { - compatible = "gpio-leds"; - - wlan { - label = "fritz4040:green:wlan"; - gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>; - }; - - panic: info_red { - label = "fritz4040:red:info"; - gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - wan { - label = "fritz4040:green:wan"; - gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "fritz4040:green:power"; - gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>; - }; - - lan { - label = "fritz4040:green:lan"; - gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>; - }; - - flash: info_amber { - label = "fritz4040:amber:info"; - gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - spi-max-frequency = <24000000>; - status = "okay"; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBLENV"; /* uboot env - empty */ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "urlader"; /* APPSBL */ - reg = <0x000f0000 0x0002dc000>; - read-only; - }; - partition7@11dc00 { - /* make a backup of this partition! */ - label = "urlader_config"; - reg = <0x0011dc00 0x00002400>; - read-only; - }; - partition8@120000 { - label = "tffs1"; - reg = <0x00120000 0x00080000>; - read-only; - }; - partition9@1a0000 { - label = "tffs2"; - reg = <0x001a0000 0x00080000>; - read-only; - }; - partition10@220000 { - label = "uboot"; - reg = <0x00220000 0x00080000>; - read-only; - }; - partition11@2A0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x002a0000 0x01c60000>; - }; - partition12@1f00000 { - label = "jffs2"; - reg = <0x01f00000 0x00100000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts deleted file mode 100644 index fd7c66c953..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts +++ /dev/null @@ -1,266 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, Robert Marko - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "8devices Jalapeno"; - compatible = "8dev,jalapeno", "qcom,ipq4019"; - - soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x10>; /* lan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - pinmux_1 { - pins = "gpio53"; - function = "mdio"; - }; - pinmux_2 { - pins = "gpio52"; - function = "mdc"; - }; - pinconf { - pins = "gpio52", "gpio53"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - status = "okay"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition5@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition5@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - }; - }; - - mt29f@1 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - compatible = "spinand,mt29f", "w25n01gv"; - reg = <1>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; - qcom,phy_mdio_addr = <3>; - vlan_tag = <1 0x10>; -}; - -&gmac1 { - qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; - qcom,phy_mdio_addr = <4>; - vlan_tag = <2 0x20>; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "8devices-Jalapeno"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "8devices-Jalapeno"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts deleted file mode 100644 index 8df3796dae..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts +++ /dev/null @@ -1,335 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include -#include - -/ { - model = "ZyXEL NBG6617"; - compatible = "zyxel,nbg6617", "qcom,ipq4019"; - - chosen { - /* - * the vendor u-boot adds root and mtdparts cmdline parameters - * which we don't want... but we have to overwrite them or else - * the kernel will take them at face value. - */ - bootargs-append = " mtdparts= root=31:13"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,code = ; - linux,input-type = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - power: power { - label = "nbg6617:green:power"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - usb { - label = "nbg6617:green:usb"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - wlan2G { - label = "nbg6617:green:wlan2G"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - wlan5G { - label = "nbg6617:green:wlan5G"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "nbg6617:green:wps"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-low; - }; - }; - led_pins: led_pinmux { - mux { - pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58"; - drive-strength = <0x8>; - bias-disable; - output-low; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l25635f@0 { - compatible = "mx25l25635f", "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - spi-max-frequency = <24000000>; - status = "okay"; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBL"; /* u-boot */ - reg = <0x000e0000 0x00080000>; - /* U-Boot Standalone App "zloader" is located at 0x64000 */ - read-only; - }; - partition6@160000 { - label = "APPSBLENV"; /* u-boot env */ - reg = <0x00160000 0x00010000>; - }; - partition7@170000 { - /* make a backup of this partition! */ - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition8@180000 { - label = "kernel"; - reg = <0x00180000 0x00400000>; - }; - partition9@580000 { - label = "dualflag"; - reg = <0x00580000 0x00010000>; - read-only; - }; - partition10@590000 { - label = "header"; - reg = <0x00590000 0x00010000>; - }; - partition11@5a0000 { - label = "romd"; - reg = <0x005a0000 0x00100000>; - read-only; - }; - partition12@6a0000 { - label = "not_root_data"; - /* - * for some strange reason, someone at ZyXEL - * had the "great" idea to put the rootfs_data - * in front of rootfs... Don't do that! - * As a result this one, full MebiByte remains - * unused. - */ - reg = <0x006a0000 0x00100000>; - }; - partition13@7a0000 { - label = "rootfs"; - reg = <0x007a0000 0x01860000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts deleted file mode 100644 index 56725f94c5..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts +++ /dev/null @@ -1,304 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ASUS RT-AC58U"; - compatible = "asus,rt-ac58u", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x8000000>; - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs-append = " ubi.mtd=UBI_DEV"; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - wifi@a000000 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; - }; - - wifi@a800000 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: status { - label = "rt-ac58u:blue:status"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "rt-ac58u:blue:wan"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan2G { - label = "rt-ac58u:blue:wlan2G"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5G { - label = "rt-ac58u:blue:wlan5G"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - usb { - label = "rt-ac58u:blue:usb"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - lan { - label = "rt-ac58u:blue:lan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <0>; - /* - * U-boot looks for "n25q128a11" node, - * if we don't have it, it will spit out the following warning: - * "ipq: fdt fixup unable to find compatible node". - */ - compatible = "jedec,spi-nor"; - reg = <0>; - linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; - spi-max-frequency = <30000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition5@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition5@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - /* 0x00180000 - 0x00200000 unused */ - }; - }; - - flash@1 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "spinand,mt29f"; - reg = <1>; - spi-max-frequency = <30000000>; - - /* - * U-boot looks for "spinand,mt29f" node, - * if we don't have it, it will spit out the following warning: - * "ipq: fdt fixup unable to find compatible node". - */ - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts deleted file mode 100644 index 81612bc50b..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts +++ /dev/null @@ -1,261 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ZyXEL WRE6606"; - compatible = "zyxel,wre6606", "qcom,ipq4019"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs-append = " mtdparts="; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - leds { - compatible = "gpio-leds"; - - wps { - label = "wre6606:green:wps"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "wre6606:green:wlan5g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "wre6606:green:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_red { - label = "wre6606:red:wlan5g"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_red { - label = "wre6606:red:wlan2g"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "wre6606:green:wlan2g"; - gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l12805d@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition8@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x00ce0000>; - }; - - partition9@e60000 { - label = "manufacture"; - reg = <0x00e60000 0x00050000>; - read-only; - }; - - partition10@eb0000 { - label = "storage"; - reg = <0x00eb0000 0x00150000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts deleted file mode 100644 index 487b081c44..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ /dev/null @@ -1,239 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017-2018, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "OpenMesh A62"; - compatible = "openmesh,a62", "qcom,ipq4019"; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - red { - label = "a62:red:status"; - gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - - power: green { - label = "a62:green:status"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "a62:blue:status"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - /* hw_margin_ms is actually 300s but driver limits it to 60s */ - hw_margin_ms = <60000>; - always-running; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - enable-usb-power { - gpio-hog; - gpios = <58 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "enable USB2 power"; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - /* partitions are passed via bootloader */ - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "OM-A62"; - ieee80211-freq-limit = <5170000 5350000>; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A62"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A62"; - ieee80211-freq-limit = <5470000 5875000>; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts deleted file mode 100644 index 47202d28fe..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019-ap.dk04.1.dtsi" - -/ { - model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi deleted file mode 100644 index 157037f558..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ /dev/null @@ -1,177 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include - -/ { - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; - compatible = "qcom,ipq4019"; - - soc { - pinctrl@1000000 { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio10", "gpio11"; - }; - pinconf { - pins = "gpio10", "gpio11"; - drive-strength = <16>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "okay"; - }; - - spi0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - mx25l25635e@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - compatible = "mx25l25635e"; - spi-max-frequency = <24000000>; - }; - }; - - i2c0: i2c@78b7000 { /* BLSP1 QUP2 */ - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb3_ss_phy: ssphy@9a000 { - status = "okay"; - }; - - usb3_hs_phy: hsphy@a6000 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "okay"; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - cryptobam: dma@8e04000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qpic_bam: dma@7984000 { - status = "okay"; - }; - - nand: qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts deleted file mode 100644 index 8db5588492..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts +++ /dev/null @@ -1,80 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang - * - */ - -#include "qcom-ipq4019-e2600ac.dtsi" -#include -#include - -/ { - model = "Qxwlan E2600AC c1"; - compatible = "qxwlan,e2600ac-c1", "qcom,ipq4019"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - partition@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts deleted file mode 100644 index d88de61379..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts +++ /dev/null @@ -1,115 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang - * - */ - -#include "qcom-ipq4019-e2600ac.dtsi" -#include -#include - -/ { - model = "Qxwlan E2600AC c2"; - compatible = "qxwlan,e2600ac-c2", "qcom,ipq4019"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x04000000>; - }; - }; - }; -}; - -&tlmm { - nand_pins: nand-pins { - - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi deleted file mode 100644 index 527df7ec70..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi +++ /dev/null @@ -1,262 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - - model = "Qxwlan E2600AC"; - compatible = "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256MB */ - }; - - soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - i2c@78b7000 { /* BLSP1 QUP2 */ - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - - led1 { - label = "e2600ac:green:wlan0"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - led2 { - label = "e2600ac:green:wlan1"; - gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; - }; - - led3 { - label = "e2600ac:green:usb"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - led4 { - label = "e2600ac:green:ctrl1"; - gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; - }; - - led5 { - label = "e2600ac:green:ctrl2"; - gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - }; - - led6 { - label = "e2600ac:green:ctrl3"; - gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - i2c_0_pins: i2c-0-pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts deleted file mode 100644 index cfc3037fb2..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts +++ /dev/null @@ -1,399 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/* - * Device Tree Source for Linksys EA8300 (Dallas) - * - * Copyright (C) 2019 Jeff Kletsky - * - */ - -/dts-v1/; - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Linksys EA8300 (Dallas)"; - compatible = "linksys,ea8300", "qcom,ipq4019"; - - - aliases { - led-boot = &led_wps_amber; - led-failsafe = &led_wps; - led-running = &led_linksys; - led-upgrade = &led_world; - serial0 = &blsp1_uart1; - }; - - - leds { - compatible = "gpio-leds"; - - // Retain node names from running OEM on EA8300 - - // Front panel LEDs, top to bottom - - led_plug: diag { - label = "ea8300:amber:plug"; - gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; - }; - - led_world: internet { - label = "ea8300:amber:world"; - gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; - }; - - led_wps: wps { - label = "ea8300:white:wps"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - - led_wps_amber: wps_amber { - label = "ea8300:amber:wps"; - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_linksys: pwr { - label = "ea8300:white:linksys"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - // On back panel, above USB socket - - led_usb: usb { - label = "ea8300:green:usb"; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - trigger-sources = <&usb3_port1>, <&usb3_port2>, - <&usb2_port1>; - linux,default-trigger = "usbport"; - }; - }; - - - keys { - compatible = "gpio-keys"; - - button@0 { - label = "reset"; - linux,code = ; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - button@1 { - label = "wps"; - linux,code = ; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - }; - - - // - // OEM U-Boot provides either - // init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \ - // root=ubi0:ubifs rootwait rw - // or the same with ubi.mtd=13,2048 - // - - chosen { - bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro"; - }; - - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - status = "okay"; - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - -}; - -&cryptobam { - status = "okay"; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@100000 { - label = "mibib"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "qsee"; - reg = <0x200000 0x100000>; - read-only; - }; - - partition@300000 { - label = "cdt"; - reg = <0x300000 0x80000>; - read-only; - }; - - partition@380000 { - label = "appsblenv"; - reg = <0x380000 0x80000>; - read-only; - }; - - partition@400000 { - label = "ART"; - reg = <0x400000 0x80000>; - read-only; - }; - - partition@480000 { - label = "appsbl"; - reg = <0x480000 0x200000>; - read-only; - }; - - partition@680000 { - label = "u_env"; - reg = <0x680000 0x80000>; - // writable -- U-Boot environment - }; - - partition@700000 { - label = "s_env"; - reg = <0x700000 0x40000>; - // writable -- Boot counter records - }; - - partition@740000 { - label = "devinfo"; - reg = <0x740000 0x40000>; - read-only; - }; - - partition@780000 { - label = "kernel"; - reg = <0x780000 0x5800000>; - }; - - partition@a80000 { - label = "rootfs"; - reg = <0xa80000 0x5500000>; - }; - - partition@5f80000 { - label = "alt_kernel"; - reg = <0x5f80000 0x5800000>; - }; - - partition@6280000 { - label = "alt_rootfs"; - reg = <0x6280000 0x5500000>; - }; - - partition@b780000 { - label = "sysdiag"; - reg = <0xb780000 0x100000>; - read-only; - }; - - partition@b880000 { - label = "syscfg"; - reg = <0xb880000 0x4680000>; - read-only; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - serial_0_pins: serial0-pinmux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - // gpio61 controls led_usb - - pulldowns { - pins = "gpio55", "gpio56", "gpio57", - "gpio60", "gpio62", "gpio63", - "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5330000>; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; - -&wifi2 { - status = "okay"; - ieee80211-freq-limit = <5490000 5835000>; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts deleted file mode 100644 index ce117b451a..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts +++ /dev/null @@ -1,299 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Box 7530"; - compatible = "avm,fritzbox-7530"; - - aliases { - led-boot = &power_green; - led-failsafe = &info_red; - led-running = &power_green; - led-upgrade = &info_green; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - dect { - label = "dect"; - gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - info_red: info_red { - label = "fritzbox-7530:red:info"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - info_green: info { - label = "fritzbox-7530:green:info"; - gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "fritzbox-7530:green:wlan"; - gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; - }; - - fon { - label = "fritzbox-7530:green:fon"; - gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - }; - - power_green: power { - label = "fritzbox-7530:green:power"; - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "fritzbox-7530:green:wps"; - gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - usb-power { - line-name = "enable USB3 power"; - gpios = <49 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x000000 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x080000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - dsl@1,0 { - compatible = "intel,vrx518"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts deleted file mode 100644 index 9fe1629f19..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts +++ /dev/null @@ -1,262 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Repeater 1200"; - compatible = "avm,fritzrepeater-1200"; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_red; - }; - - soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - phy-mode = "rgmii-rxid"; - qcom,num_gmac = <1>; - qcom,single-phy; - }; - }; - - key { - compatible = "gpio-keys"; - - wps { - label = "WPS button"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_red: power_red { - label = "fritzwlan-1200:red:power"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - power_green: power_green { - label = "fritzwlan-1200:green:power"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - power_yellow { - label = "fritzwlan-1200:yellow:power"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - phy-reset { - line-name = "PHY-reset"; - gpios = <19 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; - - phy-reset-2 { - line-name = "PHY-reset-2"; - gpios = <47 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <0>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts deleted file mode 100644 index 07a140095a..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts +++ /dev/null @@ -1,260 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Repeater 3000"; - compatible = "avm,fritzrepeater-3000"; - - aliases { - led-boot = &power_led; - led-failsafe = &power_led; - led-running = &power_led; - led-upgrade = &power_led; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - key { - compatible = "gpio-keys"; - - connect { - label = "Connect"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - connect_red { - label = "fritzwlan-3000:red:connect"; - gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - }; - - connect_green { - label = "fritzwlan-3000:green:connect"; - gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - }; - - connect_blue { - label = "fritzwlan-3000:blue:connect"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - power_led: power { - label = "fritzwlan-3000:green:power"; - gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x000000 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x080000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5350000>; - /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - /* QCA9984 */ - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - ieee80211-freq-limit = <5470000 5875000>; - /* Uses the reference BDF */ - }; - }; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts deleted file mode 100644 index 780252f94c..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts +++ /dev/null @@ -1,306 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/dts-v1/; - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ASUS Lyra MAP-AC2200"; - compatible = "asus,map-ac2200"; - - aliases { - led-boot = &led_blue0; - led-failsafe = &led_red0; - led-running = &led_blue0; - led-upgrade = &led_red0; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - reset { - label = "reset"; - gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "CDT"; - reg = <0x200000 0x80000>; - read-only; - }; - - partition@280000 { - label = "APPSBL"; - reg = <0x280000 0x140000>; - read-only; - }; - - partition@3c0000 { - label = "APPSBLENV"; - reg = <0x3c0000 0x40000>; - read-only; - }; - - partition@400000 { - label = "ubi"; - reg = <0x400000 0x7c00000>; - }; - }; - }; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; - ieee80211-freq-limit = <5470000 5875000>; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; - ieee80211-freq-limit = <5170000 5350000>; - }; - }; -}; - -&usb2_hs_phy { - /* Bluetooth module attached via USB */ - status = "okay"; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@32 { - /* 9-channel RGB LED controller */ - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = [01]; - - led_blue0: blue0 { - chan-name = "blue0"; - label = "map-ac2200:blue:chan0"; - led-cur = [fa]; - max-cur = [ff]; - }; - - blue1 { - chan-name = "blue1"; - label = "map-ac2200:blue:chan1"; - led-cur = [fa]; - max-cur = [ff]; - }; - - blue2 { - chan-name = "blue2"; - label = "map-ac2200:blue:chan2"; - led-cur = [fa]; - max-cur = [ff]; - }; - - led_green0: green0 { - chan-name = "green0"; - label = "map-ac2200:green:chan0"; - led-cur = [fa]; - max-cur = [ff]; - }; - - green1 { - chan-name = "green1"; - label = "map-ac2200:green:chan1"; - led-cur = [fa]; - max-cur = [ff]; - }; - - green2 { - chan-name = "green2"; - label = "map-ac2200:green:chan2"; - led-cur = [fa]; - max-cur = [ff]; - }; - - led_red0: red0 { - chan-name = "red0"; - label = "map-ac2200:red:chan0"; - led-cur = [fa]; - max-cur = [ff]; - }; - - red1 { - chan-name = "red1"; - label = "map-ac2200:red:chan1"; - led-cur = [fa]; - max-cur = [ff]; - }; - - red2 { - chan-name = "red2"; - label = "map-ac2200:red:chan2"; - led-cur = [fa]; - max-cur = [ff]; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts deleted file mode 100644 index 661bbfd368..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts +++ /dev/null @@ -1,268 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Christian Mehlis - * Copyright (c) 2017-2018, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Compex WPJ428"; - compatible = "compex,wpj428", "qcom,ipq4019"; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &status; - led-failsafe = &status; - led-upgrade = &status; - }; - - leds { - compatible = "gpio-leds"; - - status: rss4 { - label = "wpj428:green:rss4"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - rss3 { - label = "wpj428:green:rss3"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - }; - - beeper: beeper { - compatible = "gpio-beeper"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition5@f0000 { - label = "0:APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition5@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition6@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x01e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts deleted file mode 100644 index 81a290ec9e..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts +++ /dev/null @@ -1,278 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "GL.iNet GL-B1300"; - compatible = "glinet,gl-b1300", "qcom,ipq4019"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x18>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - label = "gl-b1300:green:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - mesh { - label = "gl-b1300:green:mesh"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan { - label = "gl-b1300:green:wlan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l25635f@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - MIBIB@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - QSEE@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - CDT@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - DDRPARAMS@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - APPSBLENV@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - APPSBL@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - ART@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - - firmware@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "GL-B1300"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "GL-B1300"; -}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts deleted file mode 100644 index fcc6410b81..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ /dev/null @@ -1,394 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for Meraki MR33 (Stinkbug) - * - * Copyright (C) 2017 Chris Blake - * Copyright (C) 2017 Christian Lamparter - * - * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Meraki MR33 Access Point"; - compatible = "meraki,mr33", "qcom,ipq4019"; - - aliases { - led-boot = &status_green; - led-failsafe = &status_red; - led-running = &status_green; - led-upgrade = &power_orange; - }; - - /* Do we really need this defined? */ - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - /delete-node/ ethernet-phy@0; - /delete-node/ ethernet-phy@2; - /delete-node/ ethernet-phy@3; - /delete-node/ ethernet-phy@4; - }; - - /* It is a 56-bit counter that supplies the count to the ARM arch - timers and without upstream driver */ - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - bluetooth { - compatible = "ti,cc2650"; - enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - qcom,single-phy; - qcom,num_gmac = <1>; - phy-mode = "rgmii-rxid"; - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_orange: power { - label = "mr33:orange:power"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - panic-indicator; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <1>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; - -&blsp1_i2c3{ - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - at24@50 { - compatible = "atmel,24c64"; - pagesize = <32>; - reg = <0x50>; - read-only; /* This holds our MAC & Meraki board-data */ - }; -}; - -&blsp1_i2c4{ - pinctrl-0 = <&i2c_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@30 { - compatible = "ti,lp5562"; - reg = <0x30>; - clock-mode = /bits/8 <2>; - enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; - - /* RGB led */ - status_red: chan0 { - chan-name = "mr33:red:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - status_green: chan1 { - chan-name = "mr33:green:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan2 { - chan-name = "mr33:blue:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan3 { - chan-name = "mr33:white:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x000000000000 0x000000100000>; - read-only; - }; - partition@1 { - label = "mibib"; - reg = <0x000000100000 0x000000100000>; - read-only; - }; - partition@2 { - label = "bootconfig"; - reg = <0x000000200000 0x000000100000>; - read-only; - }; - partition@3 { - label = "qsee"; - reg = <0x000000300000 0x000000100000>; - read-only; - }; - partition@4 { - label = "qsee_alt"; - reg = <0x000000400000 0x000000100000>; - read-only; - }; - partition@5 { - label = "cdt"; - reg = <0x000000500000 0x000000080000>; - read-only; - }; - partition@6 { - label = "cdt_alt"; - reg = <0x000000580000 0x000000080000>; - read-only; - }; - partition@7 { - label = "ddrparams"; - reg = <0x000000600000 0x000000080000>; - read-only; - }; - partition@8 { - label = "u-boot"; - reg = <0x000000700000 0x000000200000>; - read-only; - }; - partition@9 { - label = "u-boot-backup"; - reg = <0x000000900000 0x000000200000>; - read-only; - }; - partition@10 { - label = "ART"; - reg = <0x000000b00000 0x000000080000>; - read-only; - }; - partition@11 { - label = "ubi"; - reg = <0x000000c00000 0x000007000000>; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - /* - * GPIO43 should be 0/1 whenever the unit is - * powered through PoE or AC-Adapter. - * That said, playing with this seems to - * reset the AP. - */ - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - /* We use the i2c-0 pins for serial_1 */ - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - }; - pinconf { - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; - }; - - i2c_1_pins: i2c_1_pinmux { - pinmux { - function = "blsp_i2c1"; - pins = "gpio34", "gpio35"; - }; - pinconf { - pins = "gpio34", "gpio35"; - drive-strength = <16>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - /* - * There are 18 pins. 15 pins are common between LCD and NAND. - * The QPIC controller arbitrates between LCD and NAND. Of the - * remaining 4, 2 are for NAND and 2 are for LCD exclusively. - * - * The meraki source hints that the bluetooth module claims - * pin 52 as well. But sadly, there's no data whenever this - * is a NAND or LCD exclusive pin or not. - */ - - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; -}; diff --git a/target/linux/ipq40xx/patches-4.14/030-mtd-nand-Use-standard-large-page-OOB-layout-when-usi.patch b/target/linux/ipq40xx/patches-4.14/030-mtd-nand-Use-standard-large-page-OOB-layout-when-usi.patch deleted file mode 100644 index 67dee70927..0000000000 --- a/target/linux/ipq40xx/patches-4.14/030-mtd-nand-Use-standard-large-page-OOB-layout-when-usi.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 882fd1577cbe7812ae3a48988180c5f0fda475ca Mon Sep 17 00:00:00 2001 -From: Miquel Raynal -Date: Sat, 26 Aug 2017 17:19:15 +0200 -Subject: [PATCH] mtd: nand: Use standard large page OOB layout when using - NAND_ECC_NONE - -Use the core's large page OOB layout functions when not reserving any -space for ECC bytes in the OOB layout. Fix ->nand_ooblayout_ecc_lp() -to return -ERANGE instead of a zero length in this case. - -Signed-off-by: Miquel Raynal -Signed-off-by: Boris Brezillon ---- - drivers/mtd/nand/nand_base.c | 15 ++++++++++++++- - 1 file changed, 14 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -115,7 +115,7 @@ static int nand_ooblayout_ecc_lp(struct - struct nand_chip *chip = mtd_to_nand(mtd); - struct nand_ecc_ctrl *ecc = &chip->ecc; - -- if (section) -+ if (section || !ecc->total) - return -ERANGE; - - oobregion->length = ecc->total; -@@ -4712,6 +4712,19 @@ int nand_scan_tail(struct mtd_info *mtd) - mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops); - break; - default: -+ /* -+ * Expose the whole OOB area to users if ECC_NONE -+ * is passed. We could do that for all kind of -+ * ->oobsize, but we must keep the old large/small -+ * page with ECC layout when ->oobsize <= 128 for -+ * compatibility reasons. -+ */ -+ if (ecc->mode == NAND_ECC_NONE) { -+ mtd_set_ooblayout(mtd, -+ &nand_ooblayout_lp_ops); -+ break; -+ } -+ - WARN(1, "No oob scheme defined for oobsize %d\n", - mtd->oobsize); - ret = -EINVAL; diff --git a/target/linux/ipq40xx/patches-4.14/031-mtd-nand-use-usual-return-values-for-the-erase-hook.patch b/target/linux/ipq40xx/patches-4.14/031-mtd-nand-use-usual-return-values-for-the-erase-hook.patch deleted file mode 100644 index 962baeb2b5..0000000000 --- a/target/linux/ipq40xx/patches-4.14/031-mtd-nand-use-usual-return-values-for-the-erase-hook.patch +++ /dev/null @@ -1,48 +0,0 @@ -From eb94555e9e97c9983461214046b4d72c4ab4ba70 Mon Sep 17 00:00:00 2001 -From: Miquel Raynal -Date: Thu, 30 Nov 2017 18:01:28 +0100 -Subject: [PATCH] mtd: nand: use usual return values for the ->erase() hook - -Avoid using specific defined values for checking returned status of the -->erase() hook. Instead, use usual negative error values on failure, -zero otherwise. - -Signed-off-by: Miquel Raynal -Acked-by: Masahiro Yamada -Signed-off-by: Boris Brezillon ---- - drivers/mtd/nand/denali.c | 2 +- - drivers/mtd/nand/docg4.c | 7 ++++++- - drivers/mtd/nand/nand_base.c | 10 ++++++++-- - 3 files changed, 15 insertions(+), 4 deletions(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -2994,11 +2994,17 @@ out: - static int single_erase(struct mtd_info *mtd, int page) - { - struct nand_chip *chip = mtd_to_nand(mtd); -+ int status; -+ - /* Send commands to erase a block */ - chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); - chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); - -- return chip->waitfunc(mtd, chip); -+ status = chip->waitfunc(mtd, chip); -+ if (status < 0) -+ return status; -+ -+ return status & NAND_STATUS_FAIL ? -EIO : 0; - } - - /** -@@ -3082,7 +3088,7 @@ int nand_erase_nand(struct mtd_info *mtd - status = chip->erase(mtd, page & chip->pagemask); - - /* See if block erase succeeded */ -- if (status & NAND_STATUS_FAIL) { -+ if (status) { - pr_debug("%s: failed erase, page 0x%08x\n", - __func__, page); - instr->state = MTD_ERASE_FAILED; diff --git a/target/linux/ipq40xx/patches-4.14/040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch b/target/linux/ipq40xx/patches-4.14/040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch deleted file mode 100644 index b685998356..0000000000 --- a/target/linux/ipq40xx/patches-4.14/040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch +++ /dev/null @@ -1,409 +0,0 @@ -From 6b4faeac05bc0b91616b921191cb054d1376f3b4 Mon Sep 17 00:00:00 2001 -From: Sricharan R -Date: Mon, 28 Aug 2017 20:30:24 +0530 -Subject: [PATCH] dmaengine: qcom-bam: Process multiple pending descriptors - -The bam dmaengine has a circular FIFO to which we -add hw descriptors that describes the transaction. -The FIFO has space for about 4096 hw descriptors. - -Currently we add one descriptor and wait for it to -complete with interrupt and then add the next pending -descriptor. In this way, the FIFO is underutilized -since only one descriptor is processed at a time, although -there is space in FIFO for the BAM to process more. - -Instead keep adding descriptors to FIFO till its full, -that allows BAM to continue to work on the next descriptor -immediately after signalling completion interrupt for the -previous descriptor. - -Also when the client has not set the DMA_PREP_INTERRUPT for -a descriptor, then do not configure BAM to trigger a interrupt -upon completion of that descriptor. This way we get a interrupt -only for the descriptor for which DMA_PREP_INTERRUPT was -requested and there signal completion of all the previous completed -descriptors. So we still do callbacks for all requested descriptors, -but just that the number of interrupts are reduced. - -CURRENT: - - ------ ------- --------------- - |DES 0| |DESC 1| |DESC 2 + INT | - ------ ------- --------------- - | | | - | | | -INTERRUPT: (INT) (INT) (INT) -CALLBACK: (CB) (CB) (CB) - - MTD_SPEEDTEST READ PAGE: 3560 KiB/s - MTD_SPEEDTEST WRITE PAGE: 2664 KiB/s - IOZONE READ: 2456 KB/s - IOZONE WRITE: 1230 KB/s - - bam dma interrupts (after tests): 96508 - -CHANGE: - - ------ ------- ------------- - |DES 0| |DESC 1 |DESC 2 + INT | - ------ ------- -------------- - | - | - (INT) - (CB for 0, 1, 2) - - MTD_SPEEDTEST READ PAGE: 3860 KiB/s - MTD_SPEEDTEST WRITE PAGE: 2837 KiB/s - IOZONE READ: 2677 KB/s - IOZONE WRITE: 1308 KB/s - - bam dma interrupts (after tests): 58806 - -Signed-off-by: Sricharan R -Reviewed-by: Andy Gross -Tested-by: Abhishek Sahu -Signed-off-by: Vinod Koul ---- - drivers/dma/qcom/bam_dma.c | 169 +++++++++++++++++++++++++++++---------------- - 1 file changed, 109 insertions(+), 60 deletions(-) - ---- a/drivers/dma/qcom/bam_dma.c -+++ b/drivers/dma/qcom/bam_dma.c -@@ -46,6 +46,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -78,6 +79,8 @@ struct bam_async_desc { - - struct bam_desc_hw *curr_desc; - -+ /* list node for the desc in the bam_chan list of descriptors */ -+ struct list_head desc_node; - enum dma_transfer_direction dir; - size_t length; - struct bam_desc_hw desc[0]; -@@ -347,6 +350,8 @@ static const struct reg_offset_data bam_ - #define BAM_DESC_FIFO_SIZE SZ_32K - #define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1) - #define BAM_FIFO_SIZE (SZ_32K - 8) -+#define IS_BUSY(chan) (CIRC_SPACE(bchan->tail, bchan->head,\ -+ MAX_DESCRIPTORS + 1) == 0) - - struct bam_chan { - struct virt_dma_chan vc; -@@ -356,8 +361,6 @@ struct bam_chan { - /* configuration from device tree */ - u32 id; - -- struct bam_async_desc *curr_txd; /* current running dma */ -- - /* runtime configuration */ - struct dma_slave_config slave; - -@@ -372,6 +375,8 @@ struct bam_chan { - unsigned int initialized; /* is the channel hw initialized? */ - unsigned int paused; /* is the channel paused? */ - unsigned int reconfigure; /* new slave config? */ -+ /* list of descriptors currently processed */ -+ struct list_head desc_list; - - struct list_head node; - }; -@@ -540,7 +545,7 @@ static void bam_free_chan(struct dma_cha - - vchan_free_chan_resources(to_virt_chan(chan)); - -- if (bchan->curr_txd) { -+ if (!list_empty(&bchan->desc_list)) { - dev_err(bchan->bdev->dev, "Cannot free busy channel\n"); - goto err; - } -@@ -633,8 +638,6 @@ static struct dma_async_tx_descriptor *b - - if (flags & DMA_PREP_INTERRUPT) - async_desc->flags |= DESC_FLAG_EOT; -- else -- async_desc->flags |= DESC_FLAG_INT; - - async_desc->num_desc = num_alloc; - async_desc->curr_desc = async_desc->desc; -@@ -685,28 +688,16 @@ err_out: - static int bam_dma_terminate_all(struct dma_chan *chan) - { - struct bam_chan *bchan = to_bam_chan(chan); -+ struct bam_async_desc *async_desc, *tmp; - unsigned long flag; - LIST_HEAD(head); - - /* remove all transactions, including active transaction */ - spin_lock_irqsave(&bchan->vc.lock, flag); -- /* -- * If we have transactions queued, then some might be committed to the -- * hardware in the desc fifo. The only way to reset the desc fifo is -- * to do a hardware reset (either by pipe or the entire block). -- * bam_chan_init_hw() will trigger a pipe reset, and also reinit the -- * pipe. If the pipe is left disabled (default state after pipe reset) -- * and is accessed by a connected hardware engine, a fatal error in -- * the BAM will occur. There is a small window where this could happen -- * with bam_chan_init_hw(), but it is assumed that the caller has -- * stopped activity on any attached hardware engine. Make sure to do -- * this first so that the BAM hardware doesn't cause memory corruption -- * by accessing freed resources. -- */ -- if (bchan->curr_txd) { -- bam_chan_init_hw(bchan, bchan->curr_txd->dir); -- list_add(&bchan->curr_txd->vd.node, &bchan->vc.desc_issued); -- bchan->curr_txd = NULL; -+ list_for_each_entry_safe(async_desc, tmp, -+ &bchan->desc_list, desc_node) { -+ list_add(&async_desc->vd.node, &bchan->vc.desc_issued); -+ list_del(&async_desc->desc_node); - } - - vchan_get_all_descriptors(&bchan->vc, &head); -@@ -778,9 +769,9 @@ static int bam_resume(struct dma_chan *c - */ - static u32 process_channel_irqs(struct bam_device *bdev) - { -- u32 i, srcs, pipe_stts; -+ u32 i, srcs, pipe_stts, offset, avail; - unsigned long flags; -- struct bam_async_desc *async_desc; -+ struct bam_async_desc *async_desc, *tmp; - - srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE)); - -@@ -800,27 +791,40 @@ static u32 process_channel_irqs(struct b - writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR)); - - spin_lock_irqsave(&bchan->vc.lock, flags); -- async_desc = bchan->curr_txd; - -- if (async_desc) { -- async_desc->num_desc -= async_desc->xfer_len; -- async_desc->curr_desc += async_desc->xfer_len; -- bchan->curr_txd = NULL; -+ offset = readl_relaxed(bam_addr(bdev, i, BAM_P_SW_OFSTS)) & -+ P_SW_OFSTS_MASK; -+ offset /= sizeof(struct bam_desc_hw); -+ -+ /* Number of bytes available to read */ -+ avail = CIRC_CNT(offset, bchan->head, MAX_DESCRIPTORS + 1); -+ -+ list_for_each_entry_safe(async_desc, tmp, -+ &bchan->desc_list, desc_node) { -+ /* Not enough data to read */ -+ if (avail < async_desc->xfer_len) -+ break; - - /* manage FIFO */ - bchan->head += async_desc->xfer_len; - bchan->head %= MAX_DESCRIPTORS; - -+ async_desc->num_desc -= async_desc->xfer_len; -+ async_desc->curr_desc += async_desc->xfer_len; -+ avail -= async_desc->xfer_len; -+ - /* -- * if complete, process cookie. Otherwise -+ * if complete, process cookie. Otherwise - * push back to front of desc_issued so that - * it gets restarted by the tasklet - */ -- if (!async_desc->num_desc) -+ if (!async_desc->num_desc) { - vchan_cookie_complete(&async_desc->vd); -- else -+ } else { - list_add(&async_desc->vd.node, -- &bchan->vc.desc_issued); -+ &bchan->vc.desc_issued); -+ } -+ list_del(&async_desc->desc_node); - } - - spin_unlock_irqrestore(&bchan->vc.lock, flags); -@@ -882,6 +886,7 @@ static enum dma_status bam_tx_status(str - struct dma_tx_state *txstate) - { - struct bam_chan *bchan = to_bam_chan(chan); -+ struct bam_async_desc *async_desc; - struct virt_dma_desc *vd; - int ret; - size_t residue = 0; -@@ -897,11 +902,17 @@ static enum dma_status bam_tx_status(str - - spin_lock_irqsave(&bchan->vc.lock, flags); - vd = vchan_find_desc(&bchan->vc, cookie); -- if (vd) -+ if (vd) { - residue = container_of(vd, struct bam_async_desc, vd)->length; -- else if (bchan->curr_txd && bchan->curr_txd->vd.tx.cookie == cookie) -- for (i = 0; i < bchan->curr_txd->num_desc; i++) -- residue += bchan->curr_txd->curr_desc[i].size; -+ } else { -+ list_for_each_entry(async_desc, &bchan->desc_list, desc_node) { -+ if (async_desc->vd.tx.cookie != cookie) -+ continue; -+ -+ for (i = 0; i < async_desc->num_desc; i++) -+ residue += async_desc->curr_desc[i].size; -+ } -+ } - - spin_unlock_irqrestore(&bchan->vc.lock, flags); - -@@ -942,63 +953,86 @@ static void bam_start_dma(struct bam_cha - { - struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc); - struct bam_device *bdev = bchan->bdev; -- struct bam_async_desc *async_desc; -+ struct bam_async_desc *async_desc = NULL; - struct bam_desc_hw *desc; - struct bam_desc_hw *fifo = PTR_ALIGN(bchan->fifo_virt, - sizeof(struct bam_desc_hw)); - int ret; -+ unsigned int avail; -+ struct dmaengine_desc_callback cb; - - lockdep_assert_held(&bchan->vc.lock); - - if (!vd) - return; - -- list_del(&vd->node); -- -- async_desc = container_of(vd, struct bam_async_desc, vd); -- bchan->curr_txd = async_desc; -- - ret = pm_runtime_get_sync(bdev->dev); - if (ret < 0) - return; - -- /* on first use, initialize the channel hardware */ -- if (!bchan->initialized) -- bam_chan_init_hw(bchan, async_desc->dir); -- -- /* apply new slave config changes, if necessary */ -- if (bchan->reconfigure) -- bam_apply_new_config(bchan, async_desc->dir); -+ while (vd && !IS_BUSY(bchan)) { -+ list_del(&vd->node); - -- desc = bchan->curr_txd->curr_desc; -+ async_desc = container_of(vd, struct bam_async_desc, vd); - -- if (async_desc->num_desc > MAX_DESCRIPTORS) -- async_desc->xfer_len = MAX_DESCRIPTORS; -- else -- async_desc->xfer_len = async_desc->num_desc; -+ /* on first use, initialize the channel hardware */ -+ if (!bchan->initialized) -+ bam_chan_init_hw(bchan, async_desc->dir); - -- /* set any special flags on the last descriptor */ -- if (async_desc->num_desc == async_desc->xfer_len) -- desc[async_desc->xfer_len - 1].flags |= -- cpu_to_le16(async_desc->flags); -- else -- desc[async_desc->xfer_len - 1].flags |= -- cpu_to_le16(DESC_FLAG_INT); -+ /* apply new slave config changes, if necessary */ -+ if (bchan->reconfigure) -+ bam_apply_new_config(bchan, async_desc->dir); -+ -+ desc = async_desc->curr_desc; -+ avail = CIRC_SPACE(bchan->tail, bchan->head, -+ MAX_DESCRIPTORS + 1); -+ -+ if (async_desc->num_desc > avail) -+ async_desc->xfer_len = avail; -+ else -+ async_desc->xfer_len = async_desc->num_desc; - -- if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) { -- u32 partial = MAX_DESCRIPTORS - bchan->tail; -+ /* set any special flags on the last descriptor */ -+ if (async_desc->num_desc == async_desc->xfer_len) -+ desc[async_desc->xfer_len - 1].flags |= -+ cpu_to_le16(async_desc->flags); - -- memcpy(&fifo[bchan->tail], desc, -- partial * sizeof(struct bam_desc_hw)); -- memcpy(fifo, &desc[partial], (async_desc->xfer_len - partial) * -+ vd = vchan_next_desc(&bchan->vc); -+ -+ dmaengine_desc_get_callback(&async_desc->vd.tx, &cb); -+ -+ /* -+ * An interrupt is generated at this desc, if -+ * - FIFO is FULL. -+ * - No more descriptors to add. -+ * - If a callback completion was requested for this DESC, -+ * In this case, BAM will deliver the completion callback -+ * for this desc and continue processing the next desc. -+ */ -+ if (((avail <= async_desc->xfer_len) || !vd || -+ dmaengine_desc_callback_valid(&cb)) && -+ !(async_desc->flags & DESC_FLAG_EOT)) -+ desc[async_desc->xfer_len - 1].flags |= -+ cpu_to_le16(DESC_FLAG_INT); -+ -+ if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) { -+ u32 partial = MAX_DESCRIPTORS - bchan->tail; -+ -+ memcpy(&fifo[bchan->tail], desc, -+ partial * sizeof(struct bam_desc_hw)); -+ memcpy(fifo, &desc[partial], -+ (async_desc->xfer_len - partial) * - sizeof(struct bam_desc_hw)); -- } else { -- memcpy(&fifo[bchan->tail], desc, -- async_desc->xfer_len * sizeof(struct bam_desc_hw)); -- } -+ } else { -+ memcpy(&fifo[bchan->tail], desc, -+ async_desc->xfer_len * -+ sizeof(struct bam_desc_hw)); -+ } - -- bchan->tail += async_desc->xfer_len; -- bchan->tail %= MAX_DESCRIPTORS; -+ bchan->tail += async_desc->xfer_len; -+ bchan->tail %= MAX_DESCRIPTORS; -+ list_add_tail(&async_desc->desc_node, &bchan->desc_list); -+ } - - /* ensure descriptor writes and dma start not reordered */ - wmb(); -@@ -1027,7 +1061,7 @@ static void dma_tasklet(unsigned long da - bchan = &bdev->channels[i]; - spin_lock_irqsave(&bchan->vc.lock, flags); - -- if (!list_empty(&bchan->vc.desc_issued) && !bchan->curr_txd) -+ if (!list_empty(&bchan->vc.desc_issued) && !IS_BUSY(bchan)) - bam_start_dma(bchan); - spin_unlock_irqrestore(&bchan->vc.lock, flags); - } -@@ -1048,7 +1082,7 @@ static void bam_issue_pending(struct dma - spin_lock_irqsave(&bchan->vc.lock, flags); - - /* if work pending and idle, start a transaction */ -- if (vchan_issue_pending(&bchan->vc) && !bchan->curr_txd) -+ if (vchan_issue_pending(&bchan->vc) && !IS_BUSY(bchan)) - bam_start_dma(bchan); - - spin_unlock_irqrestore(&bchan->vc.lock, flags); -@@ -1152,6 +1186,7 @@ static void bam_channel_init(struct bam_ - - vchan_init(&bchan->vc, &bdev->common); - bchan->vc.desc_free = bam_dma_free_desc; -+ INIT_LIST_HEAD(&bchan->desc_list); - } - - static const struct of_device_id bam_of_match[] = { diff --git a/target/linux/ipq40xx/patches-4.14/050-0002-mtd-nand-qcom-add-command-elements-in-BAM-transactio.patch b/target/linux/ipq40xx/patches-4.14/050-0002-mtd-nand-qcom-add-command-elements-in-BAM-transactio.patch deleted file mode 100644 index 1a32cc3767..0000000000 --- a/target/linux/ipq40xx/patches-4.14/050-0002-mtd-nand-qcom-add-command-elements-in-BAM-transactio.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 8c4cdce8b1ab044a2ee1d86d5a086f67e32b3c10 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 25 Sep 2017 13:21:25 +0530 -Subject: [PATCH 2/7] mtd: nand: qcom: add command elements in BAM transaction - -All the QPIC register read/write through BAM DMA requires -command descriptor which contains the array of command elements. - -Reviewed-by: Archit Taneja -Signed-off-by: Abhishek Sahu -Signed-off-by: Boris Brezillon ---- - drivers/mtd/nand/qcom_nandc.c | 19 ++++++++++++++++++- - 1 file changed, 18 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/qcom_nandc.c -+++ b/drivers/mtd/nand/qcom_nandc.c -@@ -22,6 +22,7 @@ - #include - #include - #include -+#include - - /* NANDc reg offsets */ - #define NAND_FLASH_CMD 0x00 -@@ -199,6 +200,7 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_ - */ - #define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg)) - -+#define QPIC_PER_CW_CMD_ELEMENTS 32 - #define QPIC_PER_CW_CMD_SGL 32 - #define QPIC_PER_CW_DATA_SGL 8 - -@@ -221,8 +223,13 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_ - /* - * This data type corresponds to the BAM transaction which will be used for all - * NAND transfers. -+ * @bam_ce - the array of BAM command elements - * @cmd_sgl - sgl for NAND BAM command pipe - * @data_sgl - sgl for NAND BAM consumer/producer pipe -+ * @bam_ce_pos - the index in bam_ce which is available for next sgl -+ * @bam_ce_start - the index in bam_ce which marks the start position ce -+ * for current sgl. It will be used for size calculation -+ * for current sgl - * @cmd_sgl_pos - current index in command sgl. - * @cmd_sgl_start - start index in command sgl. - * @tx_sgl_pos - current index in data sgl for tx. -@@ -231,8 +238,11 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_ - * @rx_sgl_start - start index in data sgl for rx. - */ - struct bam_transaction { -+ struct bam_cmd_element *bam_ce; - struct scatterlist *cmd_sgl; - struct scatterlist *data_sgl; -+ u32 bam_ce_pos; -+ u32 bam_ce_start; - u32 cmd_sgl_pos; - u32 cmd_sgl_start; - u32 tx_sgl_pos; -@@ -462,7 +472,8 @@ alloc_bam_transaction(struct qcom_nand_c - - bam_txn_size = - sizeof(*bam_txn) + num_cw * -- ((sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) + -+ ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) + -+ (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) + - (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL)); - - bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL); -@@ -472,6 +483,10 @@ alloc_bam_transaction(struct qcom_nand_c - bam_txn = bam_txn_buf; - bam_txn_buf += sizeof(*bam_txn); - -+ bam_txn->bam_ce = bam_txn_buf; -+ bam_txn_buf += -+ sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw; -+ - bam_txn->cmd_sgl = bam_txn_buf; - bam_txn_buf += - sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw; -@@ -489,6 +504,8 @@ static void clear_bam_transaction(struct - if (!nandc->props->is_bam) - return; - -+ bam_txn->bam_ce_pos = 0; -+ bam_txn->bam_ce_start = 0; - bam_txn->cmd_sgl_pos = 0; - bam_txn->cmd_sgl_start = 0; - bam_txn->tx_sgl_pos = 0; diff --git a/target/linux/ipq40xx/patches-4.14/050-0003-mtd-nand-qcom-support-for-command-descriptor-formati.patch b/target/linux/ipq40xx/patches-4.14/050-0003-mtd-nand-qcom-support-for-command-descriptor-formati.patch deleted file mode 100644 index 62bac3762a..0000000000 --- a/target/linux/ipq40xx/patches-4.14/050-0003-mtd-nand-qcom-support-for-command-descriptor-formati.patch +++ /dev/null @@ -1,201 +0,0 @@ -From 8d6b6d7e135e9bbfc923d34a45cb0e72695e63ed Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 25 Sep 2017 13:21:26 +0530 -Subject: [PATCH 3/7] mtd: nand: qcom: support for command descriptor formation - -1. Add the function for command descriptor preparation which will - be used only by BAM DMA and it will form the DMA descriptors - containing command elements -2. DMA_PREP_CMD flag should be used for forming command DMA - descriptors - -Reviewed-by: Archit Taneja -Signed-off-by: Abhishek Sahu -Signed-off-by: Boris Brezillon ---- - drivers/mtd/nand/qcom_nandc.c | 108 +++++++++++++++++++++++++++++++++++------- - 1 file changed, 92 insertions(+), 16 deletions(-) - ---- a/drivers/mtd/nand/qcom_nandc.c -+++ b/drivers/mtd/nand/qcom_nandc.c -@@ -200,6 +200,14 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_ - */ - #define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg)) - -+/* Returns the NAND register physical address */ -+#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset)) -+ -+/* Returns the dma address for reg read buffer */ -+#define reg_buf_dma_addr(chip, vaddr) \ -+ ((chip)->reg_read_dma + \ -+ ((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf)) -+ - #define QPIC_PER_CW_CMD_ELEMENTS 32 - #define QPIC_PER_CW_CMD_SGL 32 - #define QPIC_PER_CW_DATA_SGL 8 -@@ -317,7 +325,8 @@ struct nandc_regs { - * controller - * @dev: parent device - * @base: MMIO base -- * @base_dma: physical base address of controller registers -+ * @base_phys: physical base address of controller registers -+ * @base_dma: dma base address of controller registers - * @core_clk: controller clock - * @aon_clk: another controller clock - * -@@ -350,6 +359,7 @@ struct qcom_nand_controller { - struct device *dev; - - void __iomem *base; -+ phys_addr_t base_phys; - dma_addr_t base_dma; - - struct clk *core_clk; -@@ -751,6 +761,66 @@ static int prepare_bam_async_desc(struct - } - - /* -+ * Prepares the command descriptor for BAM DMA which will be used for NAND -+ * register reads and writes. The command descriptor requires the command -+ * to be formed in command element type so this function uses the command -+ * element from bam transaction ce array and fills the same with required -+ * data. A single SGL can contain multiple command elements so -+ * NAND_BAM_NEXT_SGL will be used for starting the separate SGL -+ * after the current command element. -+ */ -+static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read, -+ int reg_off, const void *vaddr, -+ int size, unsigned int flags) -+{ -+ int bam_ce_size; -+ int i, ret; -+ struct bam_cmd_element *bam_ce_buffer; -+ struct bam_transaction *bam_txn = nandc->bam_txn; -+ -+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos]; -+ -+ /* fill the command desc */ -+ for (i = 0; i < size; i++) { -+ if (read) -+ bam_prep_ce(&bam_ce_buffer[i], -+ nandc_reg_phys(nandc, reg_off + 4 * i), -+ BAM_READ_COMMAND, -+ reg_buf_dma_addr(nandc, -+ (__le32 *)vaddr + i)); -+ else -+ bam_prep_ce_le32(&bam_ce_buffer[i], -+ nandc_reg_phys(nandc, reg_off + 4 * i), -+ BAM_WRITE_COMMAND, -+ *((__le32 *)vaddr + i)); -+ } -+ -+ bam_txn->bam_ce_pos += size; -+ -+ /* use the separate sgl after this command */ -+ if (flags & NAND_BAM_NEXT_SGL) { -+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start]; -+ bam_ce_size = (bam_txn->bam_ce_pos - -+ bam_txn->bam_ce_start) * -+ sizeof(struct bam_cmd_element); -+ sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos], -+ bam_ce_buffer, bam_ce_size); -+ bam_txn->cmd_sgl_pos++; -+ bam_txn->bam_ce_start = bam_txn->bam_ce_pos; -+ -+ if (flags & NAND_BAM_NWD) { -+ ret = prepare_bam_async_desc(nandc, nandc->cmd_chan, -+ DMA_PREP_FENCE | -+ DMA_PREP_CMD); -+ if (ret) -+ return ret; -+ } -+ } -+ -+ return 0; -+} -+ -+/* - * Prepares the data descriptor for BAM DMA which will be used for NAND - * data reads and writes. - */ -@@ -868,19 +938,22 @@ static int read_reg_dma(struct qcom_nand - { - bool flow_control = false; - void *vaddr; -- int size; - -- if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) -- flow_control = true; -+ vaddr = nandc->reg_read_buf + nandc->reg_read_pos; -+ nandc->reg_read_pos += num_regs; - - if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1) - first = dev_cmd_reg_addr(nandc, first); - -- size = num_regs * sizeof(u32); -- vaddr = nandc->reg_read_buf + nandc->reg_read_pos; -- nandc->reg_read_pos += num_regs; -+ if (nandc->props->is_bam) -+ return prep_bam_dma_desc_cmd(nandc, true, first, vaddr, -+ num_regs, flags); -+ -+ if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) -+ flow_control = true; - -- return prep_adm_dma_desc(nandc, true, first, vaddr, size, flow_control); -+ return prep_adm_dma_desc(nandc, true, first, vaddr, -+ num_regs * sizeof(u32), flow_control); - } - - /* -@@ -897,13 +970,9 @@ static int write_reg_dma(struct qcom_nan - bool flow_control = false; - struct nandc_regs *regs = nandc->regs; - void *vaddr; -- int size; - - vaddr = offset_to_nandc_reg(regs, first); - -- if (first == NAND_FLASH_CMD) -- flow_control = true; -- - if (first == NAND_ERASED_CW_DETECT_CFG) { - if (flags & NAND_ERASED_CW_SET) - vaddr = ®s->erased_cw_detect_cfg_set; -@@ -920,10 +989,15 @@ static int write_reg_dma(struct qcom_nan - if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD) - first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD); - -- size = num_regs * sizeof(u32); -+ if (nandc->props->is_bam) -+ return prep_bam_dma_desc_cmd(nandc, false, first, vaddr, -+ num_regs, flags); -+ -+ if (first == NAND_FLASH_CMD) -+ flow_control = true; - -- return prep_adm_dma_desc(nandc, false, first, vaddr, size, -- flow_control); -+ return prep_adm_dma_desc(nandc, false, first, vaddr, -+ num_regs * sizeof(u32), flow_control); - } - - /* -@@ -1187,7 +1261,8 @@ static int submit_descs(struct qcom_nand - } - - if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) { -- r = prepare_bam_async_desc(nandc, nandc->cmd_chan, 0); -+ r = prepare_bam_async_desc(nandc, nandc->cmd_chan, -+ DMA_PREP_CMD); - if (r) - return r; - } -@@ -2725,6 +2800,7 @@ static int qcom_nandc_probe(struct platf - if (IS_ERR(nandc->base)) - return PTR_ERR(nandc->base); - -+ nandc->base_phys = res->start; - nandc->base_dma = phys_to_dma(dev, (phys_addr_t)res->start); - - nandc->core_clk = devm_clk_get(dev, "core"); diff --git a/target/linux/ipq40xx/patches-4.14/050-0004-mtd-nand-provide-several-helpers-to-do-common-NAND-o.patch b/target/linux/ipq40xx/patches-4.14/050-0004-mtd-nand-provide-several-helpers-to-do-common-NAND-o.patch deleted file mode 100644 index 03dcb07554..0000000000 --- a/target/linux/ipq40xx/patches-4.14/050-0004-mtd-nand-provide-several-helpers-to-do-common-NAND-o.patch +++ /dev/null @@ -1,1586 +0,0 @@ -commit 97d90da8a886949f09bb4754843fb0b504956ad2 -Author: Boris Brezillon -Date: Thu Nov 30 18:01:29 2017 +0100 - - mtd: nand: provide several helpers to do common NAND operations - - This is part of the process of removing direct calls to ->cmdfunc() - outside of the core in order to introduce a better interface to execute - NAND operations. - - Here we provide several helpers and make use of them to remove all - direct calls to ->cmdfunc(). This way, we can easily modify those - helpers to make use of the new ->exec_op() interface when available. - - Signed-off-by: Boris Brezillon - [miquel.raynal@free-electrons.com: rebased and fixed some conflicts] - Signed-off-by: Miquel Raynal - Acked-by: Masahiro Yamada - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -561,14 +561,19 @@ static int nand_block_markbad_lowlevel(s - static int nand_check_wp(struct mtd_info *mtd) - { - struct nand_chip *chip = mtd_to_nand(mtd); -+ u8 status; -+ int ret; - - /* Broken xD cards report WP despite being writable */ - if (chip->options & NAND_BROKEN_XD) - return 0; - - /* Check the WP bit */ -- chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -- return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; -+ ret = nand_status_op(chip, &status); -+ if (ret) -+ return ret; -+ -+ return status & NAND_STATUS_WP ? 0 : 1; - } - - /** -@@ -667,10 +672,17 @@ EXPORT_SYMBOL_GPL(nand_wait_ready); - static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo) - { - register struct nand_chip *chip = mtd_to_nand(mtd); -+ int ret; - - timeo = jiffies + msecs_to_jiffies(timeo); - do { -- if ((chip->read_byte(mtd) & NAND_STATUS_READY)) -+ u8 status; -+ -+ ret = nand_read_data_op(chip, &status, sizeof(status), true); -+ if (ret) -+ return; -+ -+ if (status & NAND_STATUS_READY) - break; - touch_softlockup_watchdog(); - } while (time_before(jiffies, timeo)); -@@ -1021,7 +1033,15 @@ static void panic_nand_wait(struct mtd_i - if (chip->dev_ready(mtd)) - break; - } else { -- if (chip->read_byte(mtd) & NAND_STATUS_READY) -+ int ret; -+ u8 status; -+ -+ ret = nand_read_data_op(chip, &status, sizeof(status), -+ true); -+ if (ret) -+ return; -+ -+ if (status & NAND_STATUS_READY) - break; - } - mdelay(1); -@@ -1038,8 +1058,9 @@ static void panic_nand_wait(struct mtd_i - static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) - { - -- int status; - unsigned long timeo = 400; -+ u8 status; -+ int ret; - - /* - * Apply this short delay always to ensure that we do wait tWB in any -@@ -1047,7 +1068,9 @@ static int nand_wait(struct mtd_info *mt - */ - ndelay(100); - -- chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -+ ret = nand_status_op(chip, NULL); -+ if (ret) -+ return ret; - - if (in_interrupt() || oops_in_progress) - panic_nand_wait(mtd, chip, timeo); -@@ -1058,14 +1081,22 @@ static int nand_wait(struct mtd_info *mt - if (chip->dev_ready(mtd)) - break; - } else { -- if (chip->read_byte(mtd) & NAND_STATUS_READY) -+ ret = nand_read_data_op(chip, &status, -+ sizeof(status), true); -+ if (ret) -+ return ret; -+ -+ if (status & NAND_STATUS_READY) - break; - } - cond_resched(); - } while (time_before(jiffies, timeo)); - } - -- status = (int)chip->read_byte(mtd); -+ ret = nand_read_data_op(chip, &status, sizeof(status), true); -+ if (ret) -+ return ret; -+ - /* This can happen if in case of timeout or buggy dev_ready */ - WARN_ON(!(status & NAND_STATUS_READY)); - return status; -@@ -1220,6 +1251,516 @@ static void nand_release_data_interface( - } - - /** -+ * nand_read_page_op - Do a READ PAGE operation -+ * @chip: The NAND chip -+ * @page: page to read -+ * @offset_in_page: offset within the page -+ * @buf: buffer used to store the data -+ * @len: length of the buffer -+ * -+ * This function issues a READ PAGE operation. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_read_page_op(struct nand_chip *chip, unsigned int page, -+ unsigned int offset_in_page, void *buf, unsigned int len) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ if (len && !buf) -+ return -EINVAL; -+ -+ if (offset_in_page + len > mtd->writesize + mtd->oobsize) -+ return -EINVAL; -+ -+ chip->cmdfunc(mtd, NAND_CMD_READ0, offset_in_page, page); -+ if (len) -+ chip->read_buf(mtd, buf, len); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_read_page_op); -+ -+/** -+ * nand_read_param_page_op - Do a READ PARAMETER PAGE operation -+ * @chip: The NAND chip -+ * @page: parameter page to read -+ * @buf: buffer used to store the data -+ * @len: length of the buffer -+ * -+ * This function issues a READ PARAMETER PAGE operation. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+static int nand_read_param_page_op(struct nand_chip *chip, u8 page, void *buf, -+ unsigned int len) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ unsigned int i; -+ u8 *p = buf; -+ -+ if (len && !buf) -+ return -EINVAL; -+ -+ chip->cmdfunc(mtd, NAND_CMD_PARAM, page, -1); -+ for (i = 0; i < len; i++) -+ p[i] = chip->read_byte(mtd); -+ -+ return 0; -+} -+ -+/** -+ * nand_change_read_column_op - Do a CHANGE READ COLUMN operation -+ * @chip: The NAND chip -+ * @offset_in_page: offset within the page -+ * @buf: buffer used to store the data -+ * @len: length of the buffer -+ * @force_8bit: force 8-bit bus access -+ * -+ * This function issues a CHANGE READ COLUMN operation. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_change_read_column_op(struct nand_chip *chip, -+ unsigned int offset_in_page, void *buf, -+ unsigned int len, bool force_8bit) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ if (len && !buf) -+ return -EINVAL; -+ -+ if (offset_in_page + len > mtd->writesize + mtd->oobsize) -+ return -EINVAL; -+ -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset_in_page, -1); -+ if (len) -+ chip->read_buf(mtd, buf, len); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_change_read_column_op); -+ -+/** -+ * nand_read_oob_op - Do a READ OOB operation -+ * @chip: The NAND chip -+ * @page: page to read -+ * @offset_in_oob: offset within the OOB area -+ * @buf: buffer used to store the data -+ * @len: length of the buffer -+ * -+ * This function issues a READ OOB operation. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_read_oob_op(struct nand_chip *chip, unsigned int page, -+ unsigned int offset_in_oob, void *buf, unsigned int len) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ if (len && !buf) -+ return -EINVAL; -+ -+ if (offset_in_oob + len > mtd->oobsize) -+ return -EINVAL; -+ -+ chip->cmdfunc(mtd, NAND_CMD_READOOB, offset_in_oob, page); -+ if (len) -+ chip->read_buf(mtd, buf, len); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_read_oob_op); -+ -+/** -+ * nand_prog_page_begin_op - starts a PROG PAGE operation -+ * @chip: The NAND chip -+ * @page: page to write -+ * @offset_in_page: offset within the page -+ * @buf: buffer containing the data to write to the page -+ * @len: length of the buffer -+ * -+ * This function issues the first half of a PROG PAGE operation. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_prog_page_begin_op(struct nand_chip *chip, unsigned int page, -+ unsigned int offset_in_page, const void *buf, -+ unsigned int len) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ if (len && !buf) -+ return -EINVAL; -+ -+ if (offset_in_page + len > mtd->writesize + mtd->oobsize) -+ return -EINVAL; -+ -+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, offset_in_page, page); -+ -+ if (buf) -+ chip->write_buf(mtd, buf, len); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_prog_page_begin_op); -+ -+/** -+ * nand_prog_page_end_op - ends a PROG PAGE operation -+ * @chip: The NAND chip -+ * -+ * This function issues the second half of a PROG PAGE operation. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_prog_page_end_op(struct nand_chip *chip) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ int status; -+ -+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); -+ -+ status = chip->waitfunc(mtd, chip); -+ if (status & NAND_STATUS_FAIL) -+ return -EIO; -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_prog_page_end_op); -+ -+/** -+ * nand_prog_page_op - Do a full PROG PAGE operation -+ * @chip: The NAND chip -+ * @page: page to write -+ * @offset_in_page: offset within the page -+ * @buf: buffer containing the data to write to the page -+ * @len: length of the buffer -+ * -+ * This function issues a full PROG PAGE operation. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_prog_page_op(struct nand_chip *chip, unsigned int page, -+ unsigned int offset_in_page, const void *buf, -+ unsigned int len) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ int status; -+ -+ if (!len || !buf) -+ return -EINVAL; -+ -+ if (offset_in_page + len > mtd->writesize + mtd->oobsize) -+ return -EINVAL; -+ -+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, offset_in_page, page); -+ chip->write_buf(mtd, buf, len); -+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); -+ -+ status = chip->waitfunc(mtd, chip); -+ if (status & NAND_STATUS_FAIL) -+ return -EIO; -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_prog_page_op); -+ -+/** -+ * nand_change_write_column_op - Do a CHANGE WRITE COLUMN operation -+ * @chip: The NAND chip -+ * @offset_in_page: offset within the page -+ * @buf: buffer containing the data to send to the NAND -+ * @len: length of the buffer -+ * @force_8bit: force 8-bit bus access -+ * -+ * This function issues a CHANGE WRITE COLUMN operation. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_change_write_column_op(struct nand_chip *chip, -+ unsigned int offset_in_page, -+ const void *buf, unsigned int len, -+ bool force_8bit) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ if (len && !buf) -+ return -EINVAL; -+ -+ if (offset_in_page + len > mtd->writesize + mtd->oobsize) -+ return -EINVAL; -+ -+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset_in_page, -1); -+ if (len) -+ chip->write_buf(mtd, buf, len); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_change_write_column_op); -+ -+/** -+ * nand_readid_op - Do a READID operation -+ * @chip: The NAND chip -+ * @addr: address cycle to pass after the READID command -+ * @buf: buffer used to store the ID -+ * @len: length of the buffer -+ * -+ * This function sends a READID command and reads back the ID returned by the -+ * NAND. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_readid_op(struct nand_chip *chip, u8 addr, void *buf, -+ unsigned int len) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ unsigned int i; -+ u8 *id = buf; -+ -+ if (len && !buf) -+ return -EINVAL; -+ -+ chip->cmdfunc(mtd, NAND_CMD_READID, addr, -1); -+ -+ for (i = 0; i < len; i++) -+ id[i] = chip->read_byte(mtd); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_readid_op); -+ -+/** -+ * nand_status_op - Do a STATUS operation -+ * @chip: The NAND chip -+ * @status: out variable to store the NAND status -+ * -+ * This function sends a STATUS command and reads back the status returned by -+ * the NAND. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_status_op(struct nand_chip *chip, u8 *status) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -+ if (status) -+ *status = chip->read_byte(mtd); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_status_op); -+ -+/** -+ * nand_exit_status_op - Exit a STATUS operation -+ * @chip: The NAND chip -+ * -+ * This function sends a READ0 command to cancel the effect of the STATUS -+ * command to avoid reading only the status until a new read command is sent. -+ * -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_exit_status_op(struct nand_chip *chip) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ chip->cmdfunc(mtd, NAND_CMD_READ0, -1, -1); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_exit_status_op); -+ -+/** -+ * nand_erase_op - Do an erase operation -+ * @chip: The NAND chip -+ * @eraseblock: block to erase -+ * -+ * This function sends an ERASE command and waits for the NAND to be ready -+ * before returning. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_erase_op(struct nand_chip *chip, unsigned int eraseblock) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ unsigned int page = eraseblock << -+ (chip->phys_erase_shift - chip->page_shift); -+ int status; -+ -+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); -+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); -+ -+ status = chip->waitfunc(mtd, chip); -+ if (status < 0) -+ return status; -+ -+ if (status & NAND_STATUS_FAIL) -+ return -EIO; -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_erase_op); -+ -+/** -+ * nand_set_features_op - Do a SET FEATURES operation -+ * @chip: The NAND chip -+ * @feature: feature id -+ * @data: 4 bytes of data -+ * -+ * This function sends a SET FEATURES command and waits for the NAND to be -+ * ready before returning. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+static int nand_set_features_op(struct nand_chip *chip, u8 feature, -+ const void *data) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ const u8 *params = data; -+ int i, status; -+ -+ chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, feature, -1); -+ for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) -+ chip->write_byte(mtd, params[i]); -+ -+ status = chip->waitfunc(mtd, chip); -+ if (status & NAND_STATUS_FAIL) -+ return -EIO; -+ -+ return 0; -+} -+ -+/** -+ * nand_get_features_op - Do a GET FEATURES operation -+ * @chip: The NAND chip -+ * @feature: feature id -+ * @data: 4 bytes of data -+ * -+ * This function sends a GET FEATURES command and waits for the NAND to be -+ * ready before returning. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+static int nand_get_features_op(struct nand_chip *chip, u8 feature, -+ void *data) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ u8 *params = data; -+ int i; -+ -+ chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, feature, -1); -+ for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) -+ params[i] = chip->read_byte(mtd); -+ -+ return 0; -+} -+ -+/** -+ * nand_reset_op - Do a reset operation -+ * @chip: The NAND chip -+ * -+ * This function sends a RESET command and waits for the NAND to be ready -+ * before returning. -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_reset_op(struct nand_chip *chip) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_reset_op); -+ -+/** -+ * nand_read_data_op - Read data from the NAND -+ * @chip: The NAND chip -+ * @buf: buffer used to store the data -+ * @len: length of the buffer -+ * @force_8bit: force 8-bit bus access -+ * -+ * This function does a raw data read on the bus. Usually used after launching -+ * another NAND operation like nand_read_page_op(). -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len, -+ bool force_8bit) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ if (!len || !buf) -+ return -EINVAL; -+ -+ if (force_8bit) { -+ u8 *p = buf; -+ unsigned int i; -+ -+ for (i = 0; i < len; i++) -+ p[i] = chip->read_byte(mtd); -+ } else { -+ chip->read_buf(mtd, buf, len); -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_read_data_op); -+ -+/** -+ * nand_write_data_op - Write data from the NAND -+ * @chip: The NAND chip -+ * @buf: buffer containing the data to send on the bus -+ * @len: length of the buffer -+ * @force_8bit: force 8-bit bus access -+ * -+ * This function does a raw data write on the bus. Usually used after launching -+ * another NAND operation like nand_write_page_begin_op(). -+ * This function does not select/unselect the CS line. -+ * -+ * Returns 0 on success, a negative error code otherwise. -+ */ -+int nand_write_data_op(struct nand_chip *chip, const void *buf, -+ unsigned int len, bool force_8bit) -+{ -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ -+ if (!len || !buf) -+ return -EINVAL; -+ -+ if (force_8bit) { -+ const u8 *p = buf; -+ unsigned int i; -+ -+ for (i = 0; i < len; i++) -+ chip->write_byte(mtd, p[i]); -+ } else { -+ chip->write_buf(mtd, buf, len); -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(nand_write_data_op); -+ -+/** - * nand_reset - Reset and initialize a NAND device - * @chip: The NAND chip - * @chipnr: Internal die id -@@ -1240,8 +1781,10 @@ int nand_reset(struct nand_chip *chip, i - * interface settings, hence this weird ->select_chip() dance. - */ - chip->select_chip(mtd, chipnr); -- chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); -+ ret = nand_reset_op(chip); - chip->select_chip(mtd, -1); -+ if (ret) -+ return ret; - - chip->select_chip(mtd, chipnr); - ret = nand_setup_data_interface(chip, chipnr); -@@ -1397,9 +1940,19 @@ EXPORT_SYMBOL(nand_check_erased_ecc_chun - int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) - { -- chip->read_buf(mtd, buf, mtd->writesize); -- if (oob_required) -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ int ret; -+ -+ ret = nand_read_data_op(chip, buf, mtd->writesize, false); -+ if (ret) -+ return ret; -+ -+ if (oob_required) { -+ ret = nand_read_data_op(chip, chip->oob_poi, mtd->oobsize, -+ false); -+ if (ret) -+ return ret; -+ } -+ - return 0; - } - EXPORT_SYMBOL(nand_read_page_raw); -@@ -1421,29 +1974,46 @@ static int nand_read_page_raw_syndrome(s - int eccsize = chip->ecc.size; - int eccbytes = chip->ecc.bytes; - uint8_t *oob = chip->oob_poi; -- int steps, size; -+ int steps, size, ret; - - for (steps = chip->ecc.steps; steps > 0; steps--) { -- chip->read_buf(mtd, buf, eccsize); -+ ret = nand_read_data_op(chip, buf, eccsize, false); -+ if (ret) -+ return ret; -+ - buf += eccsize; - - if (chip->ecc.prepad) { -- chip->read_buf(mtd, oob, chip->ecc.prepad); -+ ret = nand_read_data_op(chip, oob, chip->ecc.prepad, -+ false); -+ if (ret) -+ return ret; -+ - oob += chip->ecc.prepad; - } - -- chip->read_buf(mtd, oob, eccbytes); -+ ret = nand_read_data_op(chip, oob, eccbytes, false); -+ if (ret) -+ return ret; -+ - oob += eccbytes; - - if (chip->ecc.postpad) { -- chip->read_buf(mtd, oob, chip->ecc.postpad); -+ ret = nand_read_data_op(chip, oob, chip->ecc.postpad, -+ false); -+ if (ret) -+ return ret; -+ - oob += chip->ecc.postpad; - } - } - - size = mtd->oobsize - (oob - chip->oob_poi); -- if (size) -- chip->read_buf(mtd, oob, size); -+ if (size) { -+ ret = nand_read_data_op(chip, oob, size, false); -+ if (ret) -+ return ret; -+ } - - return 0; - } -@@ -1532,7 +2102,9 @@ static int nand_read_subpage(struct mtd_ - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); - - p = bufpoi + data_col_addr; -- chip->read_buf(mtd, p, datafrag_len); -+ ret = nand_read_data_op(chip, p, datafrag_len, false); -+ if (ret) -+ return ret; - - /* Calculate ECC */ - for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) -@@ -1550,8 +2122,11 @@ static int nand_read_subpage(struct mtd_ - gaps = 1; - - if (gaps) { -- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ ret = nand_change_read_column_op(chip, mtd->writesize, -+ chip->oob_poi, mtd->oobsize, -+ false); -+ if (ret) -+ return ret; - } else { - /* - * Send the command to read the particular ECC bytes take care -@@ -1565,9 +2140,12 @@ static int nand_read_subpage(struct mtd_ - (busw - 1)) - aligned_len++; - -- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, -- mtd->writesize + aligned_pos, -1); -- chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); -+ ret = nand_change_read_column_op(chip, -+ mtd->writesize + aligned_pos, -+ &chip->oob_poi[aligned_pos], -+ aligned_len, false); -+ if (ret) -+ return ret; - } - - ret = mtd_ooblayout_get_eccbytes(mtd, chip->buffers->ecccode, -@@ -1624,10 +2202,17 @@ static int nand_read_page_hwecc(struct m - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - chip->ecc.hwctl(mtd, NAND_ECC_READ); -- chip->read_buf(mtd, p, eccsize); -+ -+ ret = nand_read_data_op(chip, p, eccsize, false); -+ if (ret) -+ return ret; -+ - chip->ecc.calculate(mtd, p, &ecc_calc[i]); - } -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ -+ ret = nand_read_data_op(chip, chip->oob_poi, mtd->oobsize, false); -+ if (ret) -+ return ret; - - ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, - chip->ecc.total); -@@ -1686,9 +2271,13 @@ static int nand_read_page_hwecc_oob_firs - unsigned int max_bitflips = 0; - - /* Read the OOB area first */ -- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); -+ ret = nand_read_oob_op(chip, page, 0, chip->oob_poi, mtd->oobsize); -+ if (ret) -+ return ret; -+ -+ ret = nand_read_page_op(chip, page, 0, NULL, 0); -+ if (ret) -+ return ret; - - ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, - chip->ecc.total); -@@ -1699,7 +2288,11 @@ static int nand_read_page_hwecc_oob_firs - int stat; - - chip->ecc.hwctl(mtd, NAND_ECC_READ); -- chip->read_buf(mtd, p, eccsize); -+ -+ ret = nand_read_data_op(chip, p, eccsize, false); -+ if (ret) -+ return ret; -+ - chip->ecc.calculate(mtd, p, &ecc_calc[i]); - - stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); -@@ -1736,7 +2329,7 @@ static int nand_read_page_hwecc_oob_firs - static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) - { -- int i, eccsize = chip->ecc.size; -+ int ret, i, eccsize = chip->ecc.size; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - int eccpadbytes = eccbytes + chip->ecc.prepad + chip->ecc.postpad; -@@ -1748,21 +2341,36 @@ static int nand_read_page_syndrome(struc - int stat; - - chip->ecc.hwctl(mtd, NAND_ECC_READ); -- chip->read_buf(mtd, p, eccsize); -+ -+ ret = nand_read_data_op(chip, p, eccsize, false); -+ if (ret) -+ return ret; - - if (chip->ecc.prepad) { -- chip->read_buf(mtd, oob, chip->ecc.prepad); -+ ret = nand_read_data_op(chip, oob, chip->ecc.prepad, -+ false); -+ if (ret) -+ return ret; -+ - oob += chip->ecc.prepad; - } - - chip->ecc.hwctl(mtd, NAND_ECC_READSYN); -- chip->read_buf(mtd, oob, eccbytes); -+ -+ ret = nand_read_data_op(chip, oob, eccbytes, false); -+ if (ret) -+ return ret; -+ - stat = chip->ecc.correct(mtd, p, oob, NULL); - - oob += eccbytes; - - if (chip->ecc.postpad) { -- chip->read_buf(mtd, oob, chip->ecc.postpad); -+ ret = nand_read_data_op(chip, oob, chip->ecc.postpad, -+ false); -+ if (ret) -+ return ret; -+ - oob += chip->ecc.postpad; - } - -@@ -1786,8 +2394,11 @@ static int nand_read_page_syndrome(struc - - /* Calculate remaining oob bytes */ - i = mtd->oobsize - (oob - chip->oob_poi); -- if (i) -- chip->read_buf(mtd, oob, i); -+ if (i) { -+ ret = nand_read_data_op(chip, oob, i, false); -+ if (ret) -+ return ret; -+ } - - return max_bitflips; - } -@@ -1908,8 +2519,11 @@ static int nand_do_read_ops(struct mtd_i - __func__, buf); - - read_retry: -- if (nand_standard_page_accessors(&chip->ecc)) -- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); -+ if (nand_standard_page_accessors(&chip->ecc)) { -+ ret = nand_read_page_op(chip, page, 0, NULL, 0); -+ if (ret) -+ break; -+ } - - /* - * Now read the page into the buffer. Absent an error, -@@ -2068,9 +2682,7 @@ static int nand_read(struct mtd_info *mt - */ - int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page) - { -- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -- return 0; -+ return nand_read_oob_op(chip, page, 0, chip->oob_poi, mtd->oobsize); - } - EXPORT_SYMBOL(nand_read_oob_std); - -@@ -2088,25 +2700,43 @@ int nand_read_oob_syndrome(struct mtd_in - int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; - int eccsize = chip->ecc.size; - uint8_t *bufpoi = chip->oob_poi; -- int i, toread, sndrnd = 0, pos; -+ int i, toread, sndrnd = 0, pos, ret; -+ -+ ret = nand_read_page_op(chip, page, chip->ecc.size, NULL, 0); -+ if (ret) -+ return ret; - -- chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page); - for (i = 0; i < chip->ecc.steps; i++) { - if (sndrnd) { -+ int ret; -+ - pos = eccsize + i * (eccsize + chunk); - if (mtd->writesize > 512) -- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, pos, -1); -+ ret = nand_change_read_column_op(chip, pos, -+ NULL, 0, -+ false); - else -- chip->cmdfunc(mtd, NAND_CMD_READ0, pos, page); -+ ret = nand_read_page_op(chip, page, pos, NULL, -+ 0); -+ -+ if (ret) -+ return ret; - } else - sndrnd = 1; - toread = min_t(int, length, chunk); -- chip->read_buf(mtd, bufpoi, toread); -+ -+ ret = nand_read_data_op(chip, bufpoi, toread, false); -+ if (ret) -+ return ret; -+ - bufpoi += toread; - length -= toread; - } -- if (length > 0) -- chip->read_buf(mtd, bufpoi, length); -+ if (length > 0) { -+ ret = nand_read_data_op(chip, bufpoi, length, false); -+ if (ret) -+ return ret; -+ } - - return 0; - } -@@ -2120,18 +2750,8 @@ EXPORT_SYMBOL(nand_read_oob_syndrome); - */ - int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page) - { -- int status = 0; -- const uint8_t *buf = chip->oob_poi; -- int length = mtd->oobsize; -- -- chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); -- chip->write_buf(mtd, buf, length); -- /* Send command to program the OOB data */ -- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); -- -- status = chip->waitfunc(mtd, chip); -- -- return status & NAND_STATUS_FAIL ? -EIO : 0; -+ return nand_prog_page_op(chip, page, mtd->writesize, chip->oob_poi, -+ mtd->oobsize); - } - EXPORT_SYMBOL(nand_write_oob_std); - -@@ -2147,7 +2767,7 @@ int nand_write_oob_syndrome(struct mtd_i - { - int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; - int eccsize = chip->ecc.size, length = mtd->oobsize; -- int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps; -+ int ret, i, len, pos, sndcmd = 0, steps = chip->ecc.steps; - const uint8_t *bufpoi = chip->oob_poi; - - /* -@@ -2161,7 +2781,10 @@ int nand_write_oob_syndrome(struct mtd_i - } else - pos = eccsize; - -- chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page); -+ ret = nand_prog_page_begin_op(chip, page, pos, NULL, 0); -+ if (ret) -+ return ret; -+ - for (i = 0; i < steps; i++) { - if (sndcmd) { - if (mtd->writesize <= 512) { -@@ -2170,28 +2793,40 @@ int nand_write_oob_syndrome(struct mtd_i - len = eccsize; - while (len > 0) { - int num = min_t(int, len, 4); -- chip->write_buf(mtd, (uint8_t *)&fill, -- num); -+ -+ ret = nand_write_data_op(chip, &fill, -+ num, false); -+ if (ret) -+ return ret; -+ - len -= num; - } - } else { - pos = eccsize + i * (eccsize + chunk); -- chip->cmdfunc(mtd, NAND_CMD_RNDIN, pos, -1); -+ ret = nand_change_write_column_op(chip, pos, -+ NULL, 0, -+ false); -+ if (ret) -+ return ret; - } - } else - sndcmd = 1; - len = min_t(int, length, chunk); -- chip->write_buf(mtd, bufpoi, len); -+ -+ ret = nand_write_data_op(chip, bufpoi, len, false); -+ if (ret) -+ return ret; -+ - bufpoi += len; - length -= len; - } -- if (length > 0) -- chip->write_buf(mtd, bufpoi, length); -- -- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); -- status = chip->waitfunc(mtd, chip); -+ if (length > 0) { -+ ret = nand_write_data_op(chip, bufpoi, length, false); -+ if (ret) -+ return ret; -+ } - -- return status & NAND_STATUS_FAIL ? -EIO : 0; -+ return nand_prog_page_end_op(chip); - } - EXPORT_SYMBOL(nand_write_oob_syndrome); - -@@ -2346,9 +2981,18 @@ static int nand_read_oob(struct mtd_info - int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required, int page) - { -- chip->write_buf(mtd, buf, mtd->writesize); -- if (oob_required) -- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -+ int ret; -+ -+ ret = nand_write_data_op(chip, buf, mtd->writesize, false); -+ if (ret) -+ return ret; -+ -+ if (oob_required) { -+ ret = nand_write_data_op(chip, chip->oob_poi, mtd->oobsize, -+ false); -+ if (ret) -+ return ret; -+ } - - return 0; - } -@@ -2372,29 +3016,46 @@ static int nand_write_page_raw_syndrome( - int eccsize = chip->ecc.size; - int eccbytes = chip->ecc.bytes; - uint8_t *oob = chip->oob_poi; -- int steps, size; -+ int steps, size, ret; - - for (steps = chip->ecc.steps; steps > 0; steps--) { -- chip->write_buf(mtd, buf, eccsize); -+ ret = nand_write_data_op(chip, buf, eccsize, false); -+ if (ret) -+ return ret; -+ - buf += eccsize; - - if (chip->ecc.prepad) { -- chip->write_buf(mtd, oob, chip->ecc.prepad); -+ ret = nand_write_data_op(chip, oob, chip->ecc.prepad, -+ false); -+ if (ret) -+ return ret; -+ - oob += chip->ecc.prepad; - } - -- chip->write_buf(mtd, oob, eccbytes); -+ ret = nand_write_data_op(chip, oob, eccbytes, false); -+ if (ret) -+ return ret; -+ - oob += eccbytes; - - if (chip->ecc.postpad) { -- chip->write_buf(mtd, oob, chip->ecc.postpad); -+ ret = nand_write_data_op(chip, oob, chip->ecc.postpad, -+ false); -+ if (ret) -+ return ret; -+ - oob += chip->ecc.postpad; - } - } - - size = mtd->oobsize - (oob - chip->oob_poi); -- if (size) -- chip->write_buf(mtd, oob, size); -+ if (size) { -+ ret = nand_write_data_op(chip, oob, size, false); -+ if (ret) -+ return ret; -+ } - - return 0; - } -@@ -2448,7 +3109,11 @@ static int nand_write_page_hwecc(struct - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - chip->ecc.hwctl(mtd, NAND_ECC_WRITE); -- chip->write_buf(mtd, p, eccsize); -+ -+ ret = nand_write_data_op(chip, p, eccsize, false); -+ if (ret) -+ return ret; -+ - chip->ecc.calculate(mtd, p, &ecc_calc[i]); - } - -@@ -2457,7 +3122,9 @@ static int nand_write_page_hwecc(struct - if (ret) - return ret; - -- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -+ ret = nand_write_data_op(chip, chip->oob_poi, mtd->oobsize, false); -+ if (ret) -+ return ret; - - return 0; - } -@@ -2493,7 +3160,9 @@ static int nand_write_subpage_hwecc(stru - chip->ecc.hwctl(mtd, NAND_ECC_WRITE); - - /* write data (untouched subpages already masked by 0xFF) */ -- chip->write_buf(mtd, buf, ecc_size); -+ ret = nand_write_data_op(chip, buf, ecc_size, false); -+ if (ret) -+ return ret; - - /* mask ECC of un-touched subpages by padding 0xFF */ - if ((step < start_step) || (step > end_step)) -@@ -2520,7 +3189,9 @@ static int nand_write_subpage_hwecc(stru - return ret; - - /* write OOB buffer to NAND device */ -- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -+ ret = nand_write_data_op(chip, chip->oob_poi, mtd->oobsize, false); -+ if (ret) -+ return ret; - - return 0; - } -@@ -2547,31 +3218,49 @@ static int nand_write_page_syndrome(stru - int eccsteps = chip->ecc.steps; - const uint8_t *p = buf; - uint8_t *oob = chip->oob_poi; -+ int ret; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { -- - chip->ecc.hwctl(mtd, NAND_ECC_WRITE); -- chip->write_buf(mtd, p, eccsize); -+ -+ ret = nand_write_data_op(chip, p, eccsize, false); -+ if (ret) -+ return ret; - - if (chip->ecc.prepad) { -- chip->write_buf(mtd, oob, chip->ecc.prepad); -+ ret = nand_write_data_op(chip, oob, chip->ecc.prepad, -+ false); -+ if (ret) -+ return ret; -+ - oob += chip->ecc.prepad; - } - - chip->ecc.calculate(mtd, p, oob); -- chip->write_buf(mtd, oob, eccbytes); -+ -+ ret = nand_write_data_op(chip, oob, eccbytes, false); -+ if (ret) -+ return ret; -+ - oob += eccbytes; - - if (chip->ecc.postpad) { -- chip->write_buf(mtd, oob, chip->ecc.postpad); -+ ret = nand_write_data_op(chip, oob, chip->ecc.postpad, -+ false); -+ if (ret) -+ return ret; -+ - oob += chip->ecc.postpad; - } - } - - /* Calculate remaining oob bytes */ - i = mtd->oobsize - (oob - chip->oob_poi); -- if (i) -- chip->write_buf(mtd, oob, i); -+ if (i) { -+ ret = nand_write_data_op(chip, oob, i, false); -+ if (ret) -+ return ret; -+ } - - return 0; - } -@@ -2599,8 +3288,11 @@ static int nand_write_page(struct mtd_in - else - subpage = 0; - -- if (nand_standard_page_accessors(&chip->ecc)) -- chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); -+ if (nand_standard_page_accessors(&chip->ecc)) { -+ status = nand_prog_page_begin_op(chip, page, 0, NULL, 0); -+ if (status) -+ return status; -+ } - - if (unlikely(raw)) - status = chip->ecc.write_page_raw(mtd, chip, buf, -@@ -2615,13 +3307,8 @@ static int nand_write_page(struct mtd_in - if (status < 0) - return status; - -- if (nand_standard_page_accessors(&chip->ecc)) { -- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); -- -- status = chip->waitfunc(mtd, chip); -- if (status & NAND_STATUS_FAIL) -- return -EIO; -- } -+ if (nand_standard_page_accessors(&chip->ecc)) -+ return nand_prog_page_end_op(chip); - - return 0; - } -@@ -2994,17 +3681,12 @@ out: - static int single_erase(struct mtd_info *mtd, int page) - { - struct nand_chip *chip = mtd_to_nand(mtd); -- int status; -+ unsigned int eraseblock; - - /* Send commands to erase a block */ -- chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); -- chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); -- -- status = chip->waitfunc(mtd, chip); -- if (status < 0) -- return status; -+ eraseblock = page >> (chip->phys_erase_shift - chip->page_shift); - -- return status & NAND_STATUS_FAIL ? -EIO : 0; -+ return nand_erase_op(chip, eraseblock); - } - - /** -@@ -3231,22 +3913,12 @@ static int nand_max_bad_blocks(struct mt - static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip, - int addr, uint8_t *subfeature_param) - { -- int status; -- int i; -- - if (!chip->onfi_version || - !(le16_to_cpu(chip->onfi_params.opt_cmd) - & ONFI_OPT_CMD_SET_GET_FEATURES)) - return -EINVAL; - -- chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1); -- for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) -- chip->write_byte(mtd, subfeature_param[i]); -- -- status = chip->waitfunc(mtd, chip); -- if (status & NAND_STATUS_FAIL) -- return -EIO; -- return 0; -+ return nand_set_features_op(chip, addr, subfeature_param); - } - - /** -@@ -3259,17 +3931,12 @@ static int nand_onfi_set_features(struct - static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip, - int addr, uint8_t *subfeature_param) - { -- int i; -- - if (!chip->onfi_version || - !(le16_to_cpu(chip->onfi_params.opt_cmd) - & ONFI_OPT_CMD_SET_GET_FEATURES)) - return -EINVAL; - -- chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1); -- for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) -- *subfeature_param++ = chip->read_byte(mtd); -- return 0; -+ return nand_get_features_op(chip, addr, subfeature_param); - } - - /** -@@ -3412,12 +4079,11 @@ static u16 onfi_crc16(u16 crc, u8 const - static int nand_flash_detect_ext_param_page(struct nand_chip *chip, - struct nand_onfi_params *p) - { -- struct mtd_info *mtd = nand_to_mtd(chip); - struct onfi_ext_param_page *ep; - struct onfi_ext_section *s; - struct onfi_ext_ecc_info *ecc; - uint8_t *cursor; -- int ret = -EINVAL; -+ int ret; - int len; - int i; - -@@ -3427,14 +4093,18 @@ static int nand_flash_detect_ext_param_p - return -ENOMEM; - - /* Send our own NAND_CMD_PARAM. */ -- chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); -+ ret = nand_read_param_page_op(chip, 0, NULL, 0); -+ if (ret) -+ goto ext_out; - - /* Use the Change Read Column command to skip the ONFI param pages. */ -- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, -- sizeof(*p) * p->num_of_param_pages , -1); -+ ret = nand_change_read_column_op(chip, -+ sizeof(*p) * p->num_of_param_pages, -+ ep, len, true); -+ if (ret) -+ goto ext_out; - -- /* Read out the Extended Parameter Page. */ -- chip->read_buf(mtd, (uint8_t *)ep, len); -+ ret = -EINVAL; - if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2) - != le16_to_cpu(ep->crc))) { - pr_debug("fail in the CRC.\n"); -@@ -3487,19 +4157,23 @@ static int nand_flash_detect_onfi(struct - { - struct mtd_info *mtd = nand_to_mtd(chip); - struct nand_onfi_params *p = &chip->onfi_params; -- int i, j; -- int val; -+ char id[4]; -+ int i, ret, val; - - /* Try ONFI for unknown chip or LP */ -- chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1); -- if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' || -- chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I') -+ ret = nand_readid_op(chip, 0x20, id, sizeof(id)); -+ if (ret || strncmp(id, "ONFI", 4)) -+ return 0; -+ -+ ret = nand_read_param_page_op(chip, 0, NULL, 0); -+ if (ret) - return 0; - -- chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); - for (i = 0; i < 3; i++) { -- for (j = 0; j < sizeof(*p); j++) -- ((uint8_t *)p)[j] = chip->read_byte(mtd); -+ ret = nand_read_data_op(chip, p, sizeof(*p), true); -+ if (ret) -+ return 0; -+ - if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) == - le16_to_cpu(p->crc)) { - break; -@@ -3590,20 +4264,22 @@ static int nand_flash_detect_jedec(struc - struct mtd_info *mtd = nand_to_mtd(chip); - struct nand_jedec_params *p = &chip->jedec_params; - struct jedec_ecc_info *ecc; -- int val; -- int i, j; -+ char id[5]; -+ int i, val, ret; - - /* Try JEDEC for unknown chip or LP */ -- chip->cmdfunc(mtd, NAND_CMD_READID, 0x40, -1); -- if (chip->read_byte(mtd) != 'J' || chip->read_byte(mtd) != 'E' || -- chip->read_byte(mtd) != 'D' || chip->read_byte(mtd) != 'E' || -- chip->read_byte(mtd) != 'C') -+ ret = nand_readid_op(chip, 0x40, id, sizeof(id)); -+ if (ret || strncmp(id, "JEDEC", sizeof(id))) -+ return 0; -+ -+ ret = nand_read_param_page_op(chip, 0x40, NULL, 0); -+ if (ret) - return 0; - -- chip->cmdfunc(mtd, NAND_CMD_PARAM, 0x40, -1); - for (i = 0; i < 3; i++) { -- for (j = 0; j < sizeof(*p); j++) -- ((uint8_t *)p)[j] = chip->read_byte(mtd); -+ ret = nand_read_data_op(chip, p, sizeof(*p), true); -+ if (ret) -+ return 0; - - if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 510) == - le16_to_cpu(p->crc)) -@@ -3882,8 +4558,7 @@ static int nand_detect(struct nand_chip - { - const struct nand_manufacturer *manufacturer; - struct mtd_info *mtd = nand_to_mtd(chip); -- int busw; -- int i; -+ int busw, ret; - u8 *id_data = chip->id.data; - u8 maf_id, dev_id; - -@@ -3891,17 +4566,21 @@ static int nand_detect(struct nand_chip - * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) - * after power-up. - */ -- nand_reset(chip, 0); -+ ret = nand_reset(chip, 0); -+ if (ret) -+ return ret; - - /* Select the device */ - chip->select_chip(mtd, 0); - - /* Send the command for reading device ID */ -- chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); -+ ret = nand_readid_op(chip, 0, id_data, 2); -+ if (ret) -+ return ret; - - /* Read manufacturer and device IDs */ -- maf_id = chip->read_byte(mtd); -- dev_id = chip->read_byte(mtd); -+ maf_id = id_data[0]; -+ dev_id = id_data[1]; - - /* - * Try again to make sure, as some systems the bus-hold or other -@@ -3910,11 +4589,10 @@ static int nand_detect(struct nand_chip - * not match, ignore the device completely. - */ - -- chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); -- - /* Read entire ID string */ -- for (i = 0; i < ARRAY_SIZE(chip->id.data); i++) -- id_data[i] = chip->read_byte(mtd); -+ ret = nand_readid_op(chip, 0, id_data, sizeof(chip->id.data)); -+ if (ret) -+ return ret; - - if (id_data[0] != maf_id || id_data[1] != dev_id) { - pr_info("second ID read did not match %02x,%02x against %02x,%02x\n", -@@ -4238,15 +4916,16 @@ int nand_scan_ident(struct mtd_info *mtd - - /* Check for a chip array */ - for (i = 1; i < maxchips; i++) { -+ u8 id[2]; -+ - /* See comment in nand_get_flash_type for reset */ - nand_reset(chip, i); - - chip->select_chip(mtd, i); - /* Send the command for reading device ID */ -- chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); -+ nand_readid_op(chip, 0, id, sizeof(id)); - /* Read manufacturer and device IDs */ -- if (nand_maf_id != chip->read_byte(mtd) || -- nand_dev_id != chip->read_byte(mtd)) { -+ if (nand_maf_id != id[0] || nand_dev_id != id[1]) { - chip->select_chip(mtd, -1); - break; - } ---- a/drivers/mtd/nand/qcom_nandc.c -+++ b/drivers/mtd/nand/qcom_nandc.c -@@ -1990,7 +1990,7 @@ static int qcom_nandc_write_oob(struct m - struct nand_ecc_ctrl *ecc = &chip->ecc; - u8 *oob = chip->oob_poi; - int data_size, oob_size; -- int ret, status = 0; -+ int ret; - - host->use_ecc = true; - -@@ -2027,11 +2027,7 @@ static int qcom_nandc_write_oob(struct m - return -EIO; - } - -- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); -- -- status = chip->waitfunc(mtd, chip); -- -- return status & NAND_STATUS_FAIL ? -EIO : 0; -+ return nand_prog_page_end_op(chip); - } - - static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs) -@@ -2081,7 +2077,7 @@ static int qcom_nandc_block_markbad(stru - struct qcom_nand_host *host = to_qcom_nand_host(chip); - struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - struct nand_ecc_ctrl *ecc = &chip->ecc; -- int page, ret, status = 0; -+ int page, ret; - - clear_read_regs(nandc); - clear_bam_transaction(nandc); -@@ -2114,11 +2110,7 @@ static int qcom_nandc_block_markbad(stru - return -EIO; - } - -- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); -- -- status = chip->waitfunc(mtd, chip); -- -- return status & NAND_STATUS_FAIL ? -EIO : 0; -+ return nand_prog_page_end_op(chip); - } - - /* ---- a/include/linux/mtd/rawnand.h -+++ b/include/linux/mtd/rawnand.h -@@ -1313,6 +1313,35 @@ int nand_write_page_raw(struct mtd_info - /* Reset and initialize a NAND device */ - int nand_reset(struct nand_chip *chip, int chipnr); - -+/* NAND operation helpers */ -+int nand_reset_op(struct nand_chip *chip); -+int nand_readid_op(struct nand_chip *chip, u8 addr, void *buf, -+ unsigned int len); -+int nand_status_op(struct nand_chip *chip, u8 *status); -+int nand_exit_status_op(struct nand_chip *chip); -+int nand_erase_op(struct nand_chip *chip, unsigned int eraseblock); -+int nand_read_page_op(struct nand_chip *chip, unsigned int page, -+ unsigned int offset_in_page, void *buf, unsigned int len); -+int nand_change_read_column_op(struct nand_chip *chip, -+ unsigned int offset_in_page, void *buf, -+ unsigned int len, bool force_8bit); -+int nand_read_oob_op(struct nand_chip *chip, unsigned int page, -+ unsigned int offset_in_page, void *buf, unsigned int len); -+int nand_prog_page_begin_op(struct nand_chip *chip, unsigned int page, -+ unsigned int offset_in_page, const void *buf, -+ unsigned int len); -+int nand_prog_page_end_op(struct nand_chip *chip); -+int nand_prog_page_op(struct nand_chip *chip, unsigned int page, -+ unsigned int offset_in_page, const void *buf, -+ unsigned int len); -+int nand_change_write_column_op(struct nand_chip *chip, -+ unsigned int offset_in_page, const void *buf, -+ unsigned int len, bool force_8bit); -+int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len, -+ bool force_8bit); -+int nand_write_data_op(struct nand_chip *chip, const void *buf, -+ unsigned int len, bool force_8bit); -+ - /* Free resources held by the NAND device */ - void nand_cleanup(struct nand_chip *chip); - diff --git a/target/linux/ipq40xx/patches-4.14/050-0005-mtd-nand-force-drivers-to-explicitly-send-READ-PROG-.patch b/target/linux/ipq40xx/patches-4.14/050-0005-mtd-nand-force-drivers-to-explicitly-send-READ-PROG-.patch deleted file mode 100644 index e7e2e798a1..0000000000 --- a/target/linux/ipq40xx/patches-4.14/050-0005-mtd-nand-force-drivers-to-explicitly-send-READ-PROG-.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 25f815f66a141436df8a4c45e5d2765272aea2ac Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Thu, 30 Nov 2017 18:01:30 +0100 -Subject: [PATCH 5/7] mtd: nand: force drivers to explicitly send READ/PROG - commands - -The core currently send the READ0 and SEQIN+PAGEPROG commands in -nand_do_read/write_ops(). This is inconsistent with -->read/write_oob[_raw]() hooks behavior which are expected to send -these commands. - -There's already a flag (NAND_ECC_CUSTOM_PAGE_ACCESS) to inform the core -that a specific controller wants to send the READ/SEQIN+PAGEPROG -commands on its own, but it's an opt-in flag, and existing drivers are -unlikely to be updated to pass it. - -Moreover, some controllers cannot dissociate the READ/PAGEPROG commands -from the associated data transfer and ECC engine activation, and -developers have to hack things in their ->cmdfunc() implementation to -handle such complex cases, or have to accept the perf penalty of sending -twice the same command. -To address this problem we are planning on adding a new interface which -is passed all information about a NAND operation (including the amount -of data to transfer) and replacing all calls to ->cmdfunc() to calls to -this new ->exec_op() hook. But, in order to do that, we need to have all -->cmdfunc() calls placed near their associated ->read/write_buf/byte() -calls. - -Modify the core and relevant drivers to make NAND_ECC_CUSTOM_PAGE_ACCESS -the default case, and remove this flag. - -Signed-off-by: Boris Brezillon -[miquel.raynal@free-electrons.com: tested, fixed and rebased on nand/next] -Signed-off-by: Miquel Raynal -Acked-by: Masahiro Yamada ---- - drivers/mtd/nand/qcom_nandc.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/drivers/mtd/nand/qcom_nandc.c -+++ b/drivers/mtd/nand/qcom_nandc.c -@@ -1725,6 +1725,7 @@ static int qcom_nandc_read_page(struct m - u8 *data_buf, *oob_buf = NULL; - int ret; - -+ nand_read_page_op(chip, page, 0, NULL, 0); - data_buf = buf; - oob_buf = oob_required ? chip->oob_poi : NULL; - -@@ -1750,6 +1751,7 @@ static int qcom_nandc_read_page_raw(stru - int i, ret; - int read_loc; - -+ nand_read_page_op(chip, page, 0, NULL, 0); - data_buf = buf; - oob_buf = chip->oob_poi; - -@@ -1850,6 +1852,8 @@ static int qcom_nandc_write_page(struct - u8 *data_buf, *oob_buf; - int i, ret; - -+ nand_prog_page_begin_op(chip, page, 0, NULL, 0); -+ - clear_read_regs(nandc); - clear_bam_transaction(nandc); - -@@ -1902,6 +1906,9 @@ static int qcom_nandc_write_page(struct - - free_descs(nandc); - -+ if (!ret) -+ ret = nand_prog_page_end_op(chip); -+ - return ret; - } - -@@ -1916,6 +1923,7 @@ static int qcom_nandc_write_page_raw(str - u8 *data_buf, *oob_buf; - int i, ret; - -+ nand_prog_page_begin_op(chip, page, 0, NULL, 0); - clear_read_regs(nandc); - clear_bam_transaction(nandc); - -@@ -1970,6 +1978,9 @@ static int qcom_nandc_write_page_raw(str - - free_descs(nandc); - -+ if (!ret) -+ ret = nand_prog_page_end_op(chip); -+ - return ret; - } - diff --git a/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch b/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch deleted file mode 100644 index ea8dedb5a4..0000000000 --- a/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 341844c7e06afccd64261719fa388339a589b0a4 Mon Sep 17 00:00:00 2001 -From: Felix Fietkau -Date: Sun, 22 Jul 2018 12:53:04 +0200 -Subject: [PATCH] soc: qcom: spm: add SCM probe dependency - -Check for SCM availability before attempting to use SPM. SPM probe will -fail otherwise. - -Signed-off-by: Felix Fietkau -Signed-off-by: John Crispin ---- - drivers/soc/qcom/spm.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/soc/qcom/spm.c -+++ b/drivers/soc/qcom/spm.c -@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru - cpumask_t mask; - bool use_scm_power_down = false; - -+ if (!qcom_scm_is_available()) -+ return -EPROBE_DEFER; -+ - for (i = 0; ; i++) { - state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); - if (!state_node) diff --git a/target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch b/target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch deleted file mode 100644 index d0d08af286..0000000000 --- a/target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch +++ /dev/null @@ -1,109 +0,0 @@ -From 364123029d8d547336323fbd3d659ecd0bba913f Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Mon, 23 Jul 2018 08:41:02 +0200 -Subject: [PATCH 5/8] qcom: ipq4019: use v2 of the kpss bringup mechanism - -v1 was the incorrect choice here and sometimes the board -would not come up properly. - -Signed-off-by: Matthew McClintock -Signed-off-by: Christian Lamparter -Signed-off-by: John Crispin ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++-------- - 1 file changed, 17 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -34,7 +34,8 @@ - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc0>; - qcom,saw = <&saw0>; - reg = <0x0>; -@@ -53,7 +54,8 @@ - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc1>; - qcom,saw = <&saw1>; - reg = <0x1>; -@@ -64,7 +66,8 @@ - cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc2>; - qcom,saw = <&saw2>; - reg = <0x2>; -@@ -75,13 +78,20 @@ - cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc3>; - qcom,saw = <&saw3>; - reg = <0x3>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; - }; -+ -+ L2: l2-cache { -+ compatible = "cache"; -+ cache-level = <2>; -+ qcom,saw = <&saw_l2>; -+ }; - }; - - pmu { -@@ -213,22 +223,22 @@ - }; - - acc0: clock-controller@b088000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; - }; - - acc1: clock-controller@b098000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; - }; - - acc2: clock-controller@b0a8000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; - }; - - acc3: clock-controller@b0b8000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; - }; - -@@ -256,6 +266,12 @@ - regulator; - }; - -+ saw_l2: regulator@b012000 { -+ compatible = "qcom,saw2"; -+ reg = <0xb012000 0x1000>; -+ regulator; -+ }; -+ - serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; diff --git a/target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch b/target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch deleted file mode 100644 index 06749ea733..0000000000 --- a/target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 544af73985cd14b450bb8e8a6c22b89a555ac729 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Mon, 23 Jul 2018 09:10:35 +0200 -Subject: [PATCH 6/8] qcom: ipq4019: add cpu operating points for cpufreq - support - -This adds some operating points for cpu frequeny scaling - -Signed-off-by: Matthew McClintock -Signed-off-by: John Crispin ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 34 ++++++++++++++++++++++++++-------- - 1 file changed, 30 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -41,14 +41,7 @@ - reg = <0x0>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -- operating-points = < -- /* kHz uV (fixed) */ -- 48000 1100000 -- 200000 1100000 -- 500000 1100000 -- 666000 1100000 -- >; -- clock-latency = <256000>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@1 { -@@ -61,6 +54,7 @@ - reg = <0x1>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@2 { -@@ -73,6 +67,7 @@ - reg = <0x2>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@3 { -@@ -85,6 +80,7 @@ - reg = <0x3>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - L2: l2-cache { -@@ -94,6 +90,32 @@ - }; - }; - -+ cpu0_opp_table: opp_table0 { -+ compatible = "operating-points-v2"; -+ opp-shared; -+ -+ opp-48000000 { -+ opp-hz = /bits/ 64 <48000000>; -+ clock-latency-ns = <256000>; -+ opp-microvolt = <1100000>; -+ }; -+ opp-200000000 { -+ opp-hz = /bits/ 64 <200000000>; -+ clock-latency-ns = <256000>; -+ opp-microvolt = <1100000>; -+ }; -+ opp-500000000 { -+ opp-hz = /bits/ 64 <500000000>; -+ clock-latency-ns = <256000>; -+ opp-microvolt = <1100000>; -+ }; -+ opp-716000000 { -+ opp-hz = /bits/ 64 <716000000>; -+ clock-latency-ns = <256000>; -+ opp-microvolt = <1100000>; -+ }; -+ }; -+ - pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = -Date: Sun, 22 Jul 2018 12:07:57 +0200 -Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support - -Add support for the Qualcomm Atheros IPQ4019 SoC. - -Signed-off-by: Christian Lamparter -Signed-off-by: John Crispin ---- - arch/arm/Makefile | 1 + - arch/arm/mach-qcom/Kconfig | 5 +++++ - 2 files changed, 6 insertions(+) - ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -152,6 +152,7 @@ endif - textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 - textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 - textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 -+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 - - # Machine directory name. This list is sorted alphanumerically - # by CONFIG_* macro name. ---- a/arch/arm/mach-qcom/Kconfig -+++ b/arch/arm/mach-qcom/Kconfig -@@ -27,4 +27,9 @@ config ARCH_MDM9615 - bool "Enable support for MDM9615" - select CLKSRC_QCOM - -+config ARCH_IPQ40XX -+ bool "Enable support for IPQ40XX" -+ select CLKSRC_QCOM -+ select HAVE_ARM_ARCH_TIMER -+ - endif diff --git a/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch b/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch deleted file mode 100644 index e7407bcbab..0000000000 --- a/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 24 Jul 2018 15:09:36 +0200 -Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document - -This patch adds the binding documentation for the HS/SS USB PHY found -inside Qualcom Dakota SoCs. - -Signed-off-by: John Crispin ---- - .../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt -@@ -0,0 +1,21 @@ -+Qualcom Dakota HS/SS USB PHY -+ -+Required properties: -+ - compatible: "qcom,usb-ss-ipq4019-phy", -+ "qcom,usb-hs-ipq4019-phy" -+ - reg: offset and length of the registers -+ - #phy-cells: should be 0 -+ - resets: the reset controllers as listed below -+ - reset-names: the names of the reset controllers -+ "por_rst" - the POR reset line for SS and HS phys -+ "srif_rst" - the SRIF reset line for HS phys -+Example: -+ -+hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, -+ <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+}; diff --git a/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch b/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch deleted file mode 100644 index f93c80f52e..0000000000 --- a/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch +++ /dev/null @@ -1,233 +0,0 @@ -From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 24 Jul 2018 14:45:49 +0200 -Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019 - -Add a driver to setup the USB phy on Qualcom Dakota SoCs. -The driver sets up HS and SS phys. In case of HS some magic values need to -be written to magic offsets. These were taken from the SDK driver. - -Signed-off-by: John Crispin ---- - drivers/phy/qualcomm/Kconfig | 7 ++ - drivers/phy/qualcomm/Makefile | 1 + - drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++ - 3 files changed, 196 insertions(+) - create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c - ---- a/drivers/phy/qualcomm/Kconfig -+++ b/drivers/phy/qualcomm/Kconfig -@@ -8,6 +8,13 @@ config PHY_QCOM_APQ8064_SATA - depends on OF - select GENERIC_PHY - -+config PHY_QCOM_IPQ4019_USB -+ tristate "Qualcomm IPQ4019 USB PHY module" -+ depends on OF && ARCH_QCOM -+ select GENERIC_PHY -+ help -+ Support for the USB PHY on QCOM IPQ4019/Dakota chipsets. -+ - config PHY_QCOM_IPQ806X_SATA - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" - depends on ARCH_QCOM ---- /dev/null -+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c -@@ -0,0 +1,188 @@ -+/* -+ * Copyright (C) 2018 John Crispin -+ * -+ * Based on code from -+ * Allwinner Technology Co., Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * Magic registers copied from the SDK driver code -+ */ -+#define PHY_CTRL0_ADDR 0x000 -+#define PHY_CTRL1_ADDR 0x004 -+#define PHY_CTRL2_ADDR 0x008 -+#define PHY_CTRL3_ADDR 0x00C -+#define PHY_CTRL4_ADDR 0x010 -+#define PHY_MISC_ADDR 0x024 -+#define PHY_IPG_ADDR 0x030 -+ -+#define PHY_CTRL0_VAL 0xA4600015 -+#define PHY_CTRL1_VAL 0x09500000 -+#define PHY_CTRL2_VAL 0x00058180 -+#define PHY_CTRL3_VAL 0x6DB6DCD6 -+#define PHY_CTRL4_VAL 0x836DB6DB -+#define PHY_MISC_VAL 0x3803FB0C -+#define PHY_IPG_VAL 0x47323232 -+ -+struct ipq4019_usb_phy { -+ struct device *dev; -+ struct phy *phy; -+ void __iomem *base; -+ struct reset_control *por_rst; -+ struct reset_control *srif_rst; -+}; -+ -+static int ipq4019_ss_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_ss_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_ss_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_ss_phy_ops = { -+ .power_on = ipq4019_ss_phy_power_on, -+ .power_off = ipq4019_ss_phy_power_off, -+}; -+ -+static int ipq4019_hs_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ reset_control_assert(phy->srif_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_hs_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_hs_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->srif_rst); -+ msleep(10); -+ -+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR); -+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR); -+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR); -+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR); -+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR); -+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR); -+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR); -+ msleep(10); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_hs_phy_ops = { -+ .power_on = ipq4019_hs_phy_power_on, -+ .power_off = ipq4019_hs_phy_power_off, -+}; -+ -+static const struct of_device_id ipq4019_usb_phy_of_match[] = { -+ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops}, -+ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops}, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match); -+ -+static int ipq4019_usb_phy_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct resource *res; -+ struct phy_provider *phy_provider; -+ struct ipq4019_usb_phy *phy; -+ const struct of_device_id *match; -+ -+ match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev); -+ if (!match) -+ return -ENODEV; -+ -+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); -+ if (!phy) -+ return -ENOMEM; -+ -+ phy->dev = &pdev->dev; -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ phy->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(phy->base)) { -+ dev_err(dev, "failed to remap register memory\n"); -+ return PTR_ERR(phy->base); -+ } -+ -+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); -+ if (IS_ERR(phy->por_rst)) { -+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER) -+ dev_err(dev, "POR reset is missing\n"); -+ return PTR_ERR(phy->por_rst); -+ } -+ -+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst"); -+ if (IS_ERR(phy->srif_rst)) -+ return PTR_ERR(phy->srif_rst); -+ -+ phy->phy = devm_phy_create(dev, NULL, match->data); -+ if (IS_ERR(phy->phy)) { -+ dev_err(dev, "failed to create PHY\n"); -+ return PTR_ERR(phy->phy); -+ } -+ phy_set_drvdata(phy->phy, phy); -+ -+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); -+ -+ return PTR_ERR_OR_ZERO(phy_provider); -+} -+ -+static struct platform_driver ipq4019_usb_phy_driver = { -+ .probe = ipq4019_usb_phy_probe, -+ .driver = { -+ .of_match_table = ipq4019_usb_phy_of_match, -+ .name = "ipq4019-usb-phy", -+ } -+}; -+module_platform_driver(ipq4019_usb_phy_driver); -+ -+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver"); -+MODULE_AUTHOR("John Crispin "); -+MODULE_LICENSE("GPL v2"); ---- a/drivers/phy/qualcomm/Makefile -+++ b/drivers/phy/qualcomm/Makefile -@@ -1,5 +1,6 @@ - # SPDX-License-Identifier: GPL-2.0 - obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o -+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o - obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o - obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o - obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o diff --git a/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch deleted file mode 100644 index be413188a7..0000000000 --- a/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch +++ /dev/null @@ -1,123 +0,0 @@ -From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 24 Jul 2018 14:47:55 +0200 -Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes - -This patch makes USB work on the Dakota EVB. - -Signed-off-by: John Crispin ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++ - arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++ - 2 files changed, 94 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -101,5 +101,25 @@ - wifi@a800000 { - status = "ok"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ status = "ok"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ status = "ok"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ status = "ok"; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ status = "ok"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ status = "ok"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -414,5 +414,79 @@ - "legacy"; - status = "disabled"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ compatible = "qcom,usb-ss-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0x9a000 0x800>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_UNIPHY_PHY_ARES>; -+ reset-names = "por_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa6000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3@8af8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x8af8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB3_MASTER_CLK>, -+ <&gcc GCC_USB3_SLEEP_CLK>, -+ <&gcc GCC_USB3_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@8a00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x8a00000 0xf8000>; -+ interrupts = ; -+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ }; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb2@60f8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x60f8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB2_MASTER_CLK>, -+ <&gcc GCC_USB2_SLEEP_CLK>, -+ <&gcc GCC_USB2_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@6000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x6000000 0xf8000>; -+ interrupts = ; -+ phys = <&usb2_hs_phy>; -+ phy-names = "usb2-phy"; -+ dr_mode = "host"; -+ }; -+ }; - }; - }; diff --git a/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch b/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch deleted file mode 100644 index b1e0e352ad..0000000000 --- a/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch +++ /dev/null @@ -1,278 +0,0 @@ -From 187519403273f0599c848d20eca9acce8b1807a5 Mon Sep 17 00:00:00 2001 -From: Sricharan R -Date: Fri, 25 May 2018 11:41:12 +0530 -Subject: [PATCH] ARM: dts: ipq4019: Add a few peripheral nodes - -Now with the driver updates for some peripherals being there, -add i2c, spi, pcie, bam, qpic-nand, scm nodes to enhance the available -peripheral support. - -Reviewed-by: Abhishek Sahu -Signed-off-by: Sricharan R -Signed-off-by: Andy Gross ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 2 +- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 156 ++++++++++++++++++++++++-- - 2 files changed, 146 insertions(+), 12 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -61,7 +61,7 @@ - status = "ok"; - }; - -- spi_0: spi@78b5000 { -+ spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "ok"; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -24,8 +24,10 @@ - interrupt-parent = <&intc>; - - aliases { -- spi0 = &spi_0; -- i2c0 = &i2c_0; -+ spi0 = &blsp1_spi1; -+ spi1 = &blsp1_spi2; -+ i2c0 = &blsp1_i2c3; -+ i2c1 = &blsp1_i2c4; - }; - - cpus { -@@ -136,6 +138,12 @@ - }; - }; - -+ firmware { -+ scm { -+ compatible = "qcom,scm-ipq4019"; -+ }; -+ }; -+ - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, -@@ -181,13 +189,13 @@ - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; -- interrupts = <0 208 0>; -+ interrupts = ; - }; - - blsp_dma: dma@7884000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07884000 0x23000>; -- interrupts = ; -+ interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; -@@ -195,7 +203,7 @@ - status = "disabled"; - }; - -- spi_0: spi@78b5000 { -+ blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */ - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x78b5000 0x600>; - interrupts = ; -@@ -204,10 +212,26 @@ - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; -+ dmas = <&blsp_dma 5>, <&blsp_dma 4>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; -+ -+ blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */ -+ compatible = "qcom,spi-qup-v2.2.1"; -+ reg = <0x78b6000 0x600>; -+ interrupts = ; -+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, -+ <&gcc GCC_BLSP1_AHB_CLK>; -+ clock-names = "core", "iface"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ dmas = <&blsp_dma 7>, <&blsp_dma 6>; -+ dma-names = "rx", "tx"; - status = "disabled"; - }; - -- i2c_0: i2c@78b7000 { -+ blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */ - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b7000 0x600>; - interrupts = ; -@@ -216,14 +240,29 @@ - clock-names = "iface", "core"; - #address-cells = <1>; - #size-cells = <0>; -+ dmas = <&blsp_dma 9>, <&blsp_dma 8>; -+ dma-names = "rx", "tx"; - status = "disabled"; - }; - -+ blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */ -+ compatible = "qcom,i2c-qup-v2.2.1"; -+ reg = <0x78b8000 0x600>; -+ interrupts = ; -+ clocks = <&gcc GCC_BLSP1_AHB_CLK>, -+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; -+ clock-names = "iface", "core"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ dmas = <&blsp_dma 11>, <&blsp_dma 10>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; - - cryptobam: dma@8e04000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x08e04000 0x20000>; -- interrupts = ; -+ interrupts = ; - clocks = <&gcc GCC_CRYPTO_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; -@@ -297,7 +336,7 @@ - serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; -- interrupts = <0 107 0>; -+ interrupts = ; - status = "disabled"; - clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; -@@ -309,7 +348,7 @@ - serial@78b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78b0000 0x200>; -- interrupts = <0 108 0>; -+ interrupts = ; - status = "disabled"; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; -@@ -331,6 +370,101 @@ - reg = <0x4ab000 0x4>; - }; - -+ pcie0: pci@40000000 { -+ compatible = "qcom,pcie-ipq4019", "snps,dw-pcie"; -+ reg = <0x40000000 0xf1d -+ 0x40000f20 0xa8 -+ 0x80000 0x2000 -+ 0x40100000 0x1000>; -+ reg-names = "dbi", "elbi", "parf", "config"; -+ device_type = "pci"; -+ linux,pci-domain = <0>; -+ bus-range = <0x00 0xff>; -+ num-lanes = <1>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 -+ 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; -+ -+ interrupts = ; -+ interrupt-names = "msi"; -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0 0 0 0x7>; -+ interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -+ <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ -+ <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ -+ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ -+ clocks = <&gcc GCC_PCIE_AHB_CLK>, -+ <&gcc GCC_PCIE_AXI_M_CLK>, -+ <&gcc GCC_PCIE_AXI_S_CLK>; -+ clock-names = "aux", -+ "master_bus", -+ "slave_bus"; -+ -+ resets = <&gcc PCIE_AXI_M_ARES>, -+ <&gcc PCIE_AXI_S_ARES>, -+ <&gcc PCIE_PIPE_ARES>, -+ <&gcc PCIE_AXI_M_VMIDMT_ARES>, -+ <&gcc PCIE_AXI_S_XPU_ARES>, -+ <&gcc PCIE_PARF_XPU_ARES>, -+ <&gcc PCIE_PHY_ARES>, -+ <&gcc PCIE_AXI_M_STICKY_ARES>, -+ <&gcc PCIE_PIPE_STICKY_ARES>, -+ <&gcc PCIE_PWR_ARES>, -+ <&gcc PCIE_AHB_ARES>, -+ <&gcc PCIE_PHY_AHB_ARES>; -+ reset-names = "axi_m", -+ "axi_s", -+ "pipe", -+ "axi_m_vmid", -+ "axi_s_xpu", -+ "parf", -+ "phy", -+ "axi_m_sticky", -+ "pipe_sticky", -+ "pwr", -+ "ahb", -+ "phy_ahb"; -+ -+ status = "disabled"; -+ }; -+ -+ qpic_bam: dma@7984000 { -+ compatible = "qcom,bam-v1.7.0"; -+ reg = <0x7984000 0x1a000>; -+ interrupts = ; -+ clocks = <&gcc GCC_QPIC_CLK>; -+ clock-names = "bam_clk"; -+ #dma-cells = <1>; -+ qcom,ee = <0>; -+ status = "disabled"; -+ }; -+ -+ nand: qpic-nand@79b0000 { -+ compatible = "qcom,ipq4019-nand"; -+ reg = <0x79b0000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&gcc GCC_QPIC_CLK>, -+ <&gcc GCC_QPIC_AHB_CLK>; -+ clock-names = "core", "aon"; -+ -+ dmas = <&qpic_bam 0>, -+ <&qpic_bam 1>, -+ <&qpic_bam 2>; -+ dma-names = "tx", "rx", "cmd"; -+ status = "disabled"; -+ -+ nand@0 { -+ reg = <0>; -+ -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-bus-width = <8>; -+ }; -+ }; -+ - wifi0: wifi@a000000 { - compatible = "qcom,ipq4019-wifi"; - reg = <0xa000000 0x200000>; -@@ -364,7 +498,7 @@ - , - , - , -- ; -+ ; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7", - "msi8", "msi9", "msi10", "msi11", -@@ -406,7 +540,7 @@ - , - , - , -- ; -+ ; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7", - "msi8", "msi9", "msi10", "msi11", diff --git a/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch b/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch deleted file mode 100644 index 42ce65034b..0000000000 --- a/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 561a7e69d2811f236266ff9222a1e683ebf8b9e0 Mon Sep 17 00:00:00 2001 -From: Mathias Kresin -Date: Thu, 1 Mar 2018 20:50:29 +0100 -Subject: [PATCH] ARM: dts: ipq4019: fix PCI range - -The PCI range is invalid and PCI attached devices doen't work. - -Signed-off-by: Mathias Kresin ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -385,7 +385,7 @@ - #size-cells = <2>; - - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 -- 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; -+ 0x82000000 0 0x40300000 0x40300000 0 0x400000>; - - interrupts = ; - interrupt-names = "msi"; diff --git a/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch b/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch deleted file mode 100644 index 0efb38b244..0000000000 --- a/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch +++ /dev/null @@ -1,71 +0,0 @@ -From: Christian Lamparter -Date: Thu, 12 Apr 2018 21:01:38 +0200 -Subject: [PATCH] pinctrl: msm: fix gpio-hog related boot issues - -Sven Eckelmann reported an issue with the current IPQ4019 pinctrl. -Setting up any gpio-hog in the device-tree for his device would -"kill the bootup completely": - -| [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe -| [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe -| [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517 -| [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register -| [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip -| [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe -| [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri - -This was also verified on a RT-AC58U (IPQ4018) which would -no longer boot, if a gpio-hog was specified. (Tried forcing -the USB LED PIN (GPIO0) to high.). - -The problem is that Pinctrl+GPIO registration is currently -peformed in the following order in pinctrl-msm.c: - 1. pinctrl_register() - 2. gpiochip_add() - 3. gpiochip_add_pin_range() - -The actual error code -517 == -EPROBE_DEFER is coming from -pinctrl_get_device_gpio_range(), which is called through: - gpiochip_add - of_gpiochip_add - of_gpiochip_scan_gpios - gpiod_hog - gpiochip_request_own_desc - __gpiod_request - chip->request - gpiochip_generic_request - pinctrl_gpio_request - pinctrl_get_device_gpio_range - -pinctrl_get_device_gpio_range() is unable to find any valid -pin ranges, since nothing has been added to the pinctrldev_list yet. -so the range can't be found, and the operation fails with -EPROBE_DEFER. - -This patch fixes the issue by adding the "gpio-ranges" property to -the pinctrl device node of all upstream Qcom SoC. The pin ranges are -then added by the gpio core. - -In order to remain compatible with older, existing DTs (and ACPI) -a check for the "gpio-ranges" property has been added to -msm_gpio_init(). This prevents the driver of adding the same entry -to the pinctrldev_list twice. - -Reported-by: Sven Eckelmann -Signed-off-by: Christian Lamparter - -Origin: other, https://patchwork.kernel.org/patch/10339127/ ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + - drivers/pinctrl/qcom/pinctrl-msm.c | 23 ++++++++++++++++++----- - 14 files changed, 32 insertions(+), 6 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -186,6 +186,7 @@ - compatible = "qcom,ipq4019-pinctrl"; - reg = <0x01000000 0x300000>; - gpio-controller; -+ gpio-ranges = <&tlmm 0 0 100>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; diff --git a/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch deleted file mode 100644 index d71fbbbda2..0000000000 --- a/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch +++ /dev/null @@ -1,115 +0,0 @@ -From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 11 Mar 2018 14:41:31 +0100 -Subject: [PATCH 2/2] clk: fix apss cpu overclocking - -There's an interaction issue between the clk changes:" -clk: qcom: ipq4019: Add the apss cpu pll divider clock node -clk: qcom: ipq4019: remove fixed clocks and add pll clocks -" and the cpufreq-dt. - -cpufreq-dt is now spamming the kernel-log with the following: - -[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP -for freq 761142857 (-34) - -This only happens on certain devices like the Compex WPJ428 -and AVM FritzBox!4040. However, other devices like the Asus -RT-AC58U and Meraki MR33 work just fine. - -The issue stem from the fact that all higher CPU-Clocks -are achieved by switching the clock-parent to the P_DDRPLLAPSS -(ddrpllapss). Which is set by Qualcomm's proprietary bootcode -as part of the DDR calibration. - -For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked -at round 533 MHz (ddrpllsdcc = 190285714 Hz). - -whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is -clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). - -This patch attempts to fix the issue by modifying -clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() -to use a new qcom_find_freq_close() function, which returns the closest -matching frequency, instead of the next higher. This way, the SoC in -the FB4040 (with its max clock speed of 710.4 MHz) will no longer -try to overclock to 761 MHz. - -Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") -Signed-off-by: Christian Lamparter -Signed-off-by: John Crispin ---- - drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- - 1 file changed, 31 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fe - .reg = 0x2f020, - }; - -+ -+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, -+ unsigned long rate) -+{ -+ const struct freq_tbl *last = NULL; -+ -+ for ( ; f->freq; f++) { -+ if (rate == f->freq) -+ return f; -+ -+ if (f->freq > rate) { -+ if (!last || -+ (f->freq - rate) < (rate - last->freq)) -+ return f; -+ else -+ return last; -+ } -+ last = f; -+ } -+ -+ return last; -+} -+ - /* - * Round rate function for APSS CPU PLL Clock divider. - * It looks up the frequency table and returns the next higher frequency -@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struc - struct clk_hw *p_hw; - const struct freq_tbl *f; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct c - u32 mask; - int ret; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1315,6 +1338,7 @@ static unsigned long - clk_cpu_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) - { -+ const struct freq_tbl *f; - struct clk_fepll *pll = to_clk_fepll(hw); - u32 cdiv, pre_div; - u64 rate; -@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h - rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; - do_div(rate, pre_div); - -- return rate; -+ f = qcom_find_freq_close(pll->freq_tbl, rate); -+ if (!f) -+ return rate; -+ -+ return f->freq; - }; - - static const struct clk_ops clk_regmap_cpu_div_ops = { diff --git a/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch b/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch deleted file mode 100644 index 6a595d5ef6..0000000000 --- a/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch +++ /dev/null @@ -1,88 +0,0 @@ -From fc566294610fa49e9d8c31c4ecc9c82f49b11f59 Mon Sep 17 00:00:00 2001 -From: Sven Eckelmann -Date: Wed, 18 Apr 2018 09:10:44 +0200 -Subject: [PATCH] ARM: dts: ipq4019: Add TZ and SMEM reserved regions - -The QSEE (trustzone) is started on IPQ4019 before Linux is started. -According to QCA, it is placed in in the the memory region -0x87e80000-0x88000000 and must not be accessed directly. There is an -additional memory region 0x87e00000-0x87E80000 smem which which can be used -for communication with the TZ. The driver for the latter is not yet ready -but it is still not allowed to use this memory region like any other -memory region. - -Not reserving this memory region either leads to kernel crashes, kernel -hangs (often during the boot) or bus errors for userspace programs. The -latter happens when a program is using a memory region which is mapped to -these physical memory regions. - - [ 571.758058] Unhandled fault: imprecise external abort (0xc06) at 0x01715ff8 - [ 571.758099] pgd = cebec000 - [ 571.763826] [01715ff8] *pgd=8e7fa835, *pte=87e7f75f, *ppte=87e7fc7f - Bus error - -Signed-off-by: Sven Eckelmann - -Forwarded: https://patchwork.kernel.org/patch/10347459/ ---- -Cc: Sricharan Ramabadhran -Cc: Senthilkumar N L - -There are additional memory regions which have to be initialized first by -Linux. So they are currently not used. We were told by QCA that the -features QSDK uses them for are: - -* crash dump feature - - a couple of regions used when 'qca,scm_restart_reason' dt node has the - value 'dload_status' not set to 1 - + apps_bl <0x87000000 0x400000> - + sbl <0x87400000 0x100000> - + cnss_debug <0x87400000 0x100000> - + cpu_context_dump <0x87b00000 0x080000> - - required driver not available in Linux - - safe to remove -* QSEE app execution - - region tz_apps <0x87b80000 0x280000> - - required driver not available in Linux - - safe to remove -* communication with TZ/QSEE - - region smem <0x87b80000 0x280000> - - driver changes not yet upstreamed - - must not be removed because any access can crash kernel/program -* trustzone (QSEE) private memory - - region tz <0x87e80000 0x180000> - - must not be removed because any access can crash kernel/program - -The problem with the missing regions was reported in 2016 [1]. So maybe -this change qualifies for a stable@vger.kernel.org submission. - -[1] https://www.spinics.net/lists/linux-arm-msm/msg21536.html ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -23,6 +23,22 @@ - compatible = "qcom,ipq4019"; - interrupt-parent = <&intc>; - -+ reserved-memory { -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ ranges; -+ -+ smem_region: smem@87e00000 { -+ reg = <0x87e00000 0x080000>; -+ no-map; -+ }; -+ -+ tz@87e80000 { -+ reg = <0x87e80000 0x180000>; -+ no-map; -+ }; -+ }; -+ - aliases { - spi0 = &blsp1_spi1; - spi1 = &blsp1_spi2; diff --git a/target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch b/target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch deleted file mode 100644 index 295bc163b3..0000000000 --- a/target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Mon, 14 Nov 2016 23:49:22 +0100 -Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip - -This patch adds the W25N01GV NAND to the table of -known devices. Without this patch the device gets detected: - -nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa -nand: Unknown NAND 256MiB 1,8V 8-bit -nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16 - -Whereas the u-boot identifies it as: -spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21 -SF: Detected W25N01GV with page size 2 KiB, total 128 MiB - -Due to the page size discrepancy, it's impossible to attach -ubi volumes on the device. - -Signed-off-by: Christian Lamparter ---- - drivers/mtd/nand/nand_ids.c | 4 ++++ - include/linux/mtd/nand.h | 1 + - 2 files changed, 5 insertions(+) - ---- a/drivers/mtd/nand/nand_ids.c -+++ b/drivers/mtd/nand/nand_ids.c -@@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] = - { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, - SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, - NAND_ECC_INFO(40, SZ_1K), 4 }, -+ {"W25N01GV 1G 3.3V 8-bit", -+ { .id = {0xef, 0xaa} }, -+ SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE, -+ 2, 64, NAND_ECC_INFO(1, SZ_512) }, - - LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), - LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), diff --git a/target/linux/ipq40xx/patches-4.14/084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch b/target/linux/ipq40xx/patches-4.14/084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch deleted file mode 100644 index 5d9023e60c..0000000000 --- a/target/linux/ipq40xx/patches-4.14/084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch +++ /dev/null @@ -1,45 +0,0 @@ -From c696a020193e7f96ead97b6b19a2bcd929b299d3 Mon Sep 17 00:00:00 2001 -From: Sricharan R -Date: Fri, 25 May 2018 11:41:11 +0530 -Subject: [PATCH] ARM: dts: ipq4019: Add a default chosen node - -Add a 'chosen' node to select the serial console. -This is needed when bootloaders do not pass the -'console=' bootargs. - -Acked-by: Bjorn Andersson -Signed-off-by: Sricharan R -Signed-off-by: Andy Gross ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 8 ++++++++ - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- - 2 files changed, 9 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -20,6 +20,14 @@ - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; - compatible = "qcom,ipq4019"; - -+ aliases { -+ serial0 = &blsp1_uart1; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ - soc { - rng@22000 { - status = "ok"; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -350,7 +350,7 @@ - regulator; - }; - -- serial@78af000 { -+ blsp1_uart1: serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; - interrupts = ; diff --git a/target/linux/ipq40xx/patches-4.14/085-mtd-nand-add-macronix-mx35lf1ge4ab.patch b/target/linux/ipq40xx/patches-4.14/085-mtd-nand-add-macronix-mx35lf1ge4ab.patch deleted file mode 100644 index 56316aa517..0000000000 --- a/target/linux/ipq40xx/patches-4.14/085-mtd-nand-add-macronix-mx35lf1ge4ab.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/mtd/nand/nand_ids.c -+++ b/drivers/mtd/nand/nand_ids.c -@@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] = - { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, - SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, - NAND_ECC_INFO(40, SZ_1K), 4 }, -+ {"MX35LF1GE4AB 1G 3.3V 8-bit", -+ { .id = {0xc2, 0x12} }, -+ SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE, -+ 2, 64, NAND_ECC_INFO(4, SZ_512) }, - {"W25N01GV 1G 3.3V 8-bit", - { .id = {0xef, 0xaa} }, - SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE, diff --git a/target/linux/ipq40xx/patches-4.14/086-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch b/target/linux/ipq40xx/patches-4.14/086-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch deleted file mode 100644 index acea3fb90c..0000000000 --- a/target/linux/ipq40xx/patches-4.14/086-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch +++ /dev/null @@ -1,42 +0,0 @@ -From: Christian Lamparter -Date: Mon, 25 Feb 2019 20:14:19 +0100 -Subject: [PATCH] ARM: dts: qcom: ipq4019: enlarge PCIe BAR range - -David Bauer reported that the VDSL modem (attached via PCIe) -on his AVM Fritz!Box 7530 was complaining about not having -enough space in the BAR. A closer inspection of the old -qcom-ipq40xx.dtsi pulled from the GL-iNet repository listed: - -| qcom,pcie@80000 { -| compatible = "qcom,msm_pcie"; -| reg = <0x80000 0x2000>, -| <0x99000 0x800>, -| <0x40000000 0xf1d>, -| <0x40000f20 0xa8>, -| <0x40100000 0x1000>, -| <0x40200000 0x100000>, -| <0x40300000 0xd00000>; -| reg-names = "parf", "phy", "dm_core", "elbi", -| "conf", "io", "bars"; - -Matching the reg-names with the listed reg leads to -<0xd00000> as the size for the "bars". - -BugLink: https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg45212.html -Reported-by: David Bauer -Signed-off-by: Christian Lamparter ---- - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -401,8 +401,8 @@ - #address-cells = <3>; - #size-cells = <2>; - -- ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 -- 0x82000000 0 0x40300000 0x40300000 0 0x400000>; -+ ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, -+ <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; - - interrupts = ; - interrupt-names = "msi"; diff --git a/target/linux/ipq40xx/patches-4.14/087-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch b/target/linux/ipq40xx/patches-4.14/087-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch deleted file mode 100644 index 7864ef7fdf..0000000000 --- a/target/linux/ipq40xx/patches-4.14/087-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch +++ /dev/null @@ -1,32 +0,0 @@ -From: Niklas Cassel -Subject: [PATCH] ARM: dts: qcom: ipq4019: Fix MSI IRQ type -Date: Thu, 24 Jan 2019 14:00:47 +0100 - -The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level -triggered interrupt. - -The msi_ctrl_int will be high for as long as any MSI status bit is set, -thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the -IRQ handler to keep getting called, as long as any MSI status bit is set. - -A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has -configured this IRQ incorrectly. - -Not having the correct IRQ type defined will cause us to lose interrupts, -which in turn causes timeouts in the PCIe endpoint drivers. - -Signed-off-by: Niklas Cassel -Reviewed-by: Bjorn Andersson ---- - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -404,7 +404,7 @@ - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, - <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; - -- interrupts = ; -+ interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; diff --git a/target/linux/ipq40xx/patches-4.14/088-0001-i2c-qup-fix-copyrights-and-update-to-SPDX-identifier.patch b/target/linux/ipq40xx/patches-4.14/088-0001-i2c-qup-fix-copyrights-and-update-to-SPDX-identifier.patch deleted file mode 100644 index b2b317245f..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0001-i2c-qup-fix-copyrights-and-update-to-SPDX-identifier.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 0668bc44a42672626666e4f66aa1f2c22528e8a5 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:44:50 +0530 -Subject: [PATCH 01/13] i2c: qup: fix copyrights and update to SPDX identifier - -The file has been updated from 2016 to 2018 so fixed the -copyright years. - -Signed-off-by: Abhishek Sahu -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 13 ++----------- - 1 file changed, 2 insertions(+), 11 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -1,17 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0 - /* -- * Copyright (c) 2009-2013, The Linux Foundation. All rights reserved. -+ * Copyright (c) 2009-2013, 2016-2018, The Linux Foundation. All rights reserved. - * Copyright (c) 2014, Sony Mobile Communications AB. - * -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 and -- * only version 2 as published by the Free Software Foundation. -- * -- * This program is distributed in the hope that it will be useful, -- * but WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- * GNU General Public License for more details. -- * - */ - - #include diff --git a/target/linux/ipq40xx/patches-4.14/088-0003-i2c-qup-minor-code-reorganization-for-use_dma.patch b/target/linux/ipq40xx/patches-4.14/088-0003-i2c-qup-minor-code-reorganization-for-use_dma.patch deleted file mode 100644 index a6cbfcf2b0..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0003-i2c-qup-minor-code-reorganization-for-use_dma.patch +++ /dev/null @@ -1,76 +0,0 @@ -From eb422b539c1f39faf576826b54be93e84d9cb32a Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:44:52 +0530 -Subject: [PATCH 03/13] i2c: qup: minor code reorganization for use_dma - -1. Assigns use_dma in qup_dev structure itself which will - help in subsequent patches to determine the mode in IRQ handler. -2. Does minor code reorganization for loops to reduce the - unnecessary comparison and assignment. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Austin Christ -Reviewed-by: Andy Gross -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 19 +++++++++++-------- - 1 file changed, 11 insertions(+), 8 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -181,6 +181,8 @@ struct qup_i2c_dev { - - /* dma parameters */ - bool is_dma; -+ /* To check if the current transfer is using DMA */ -+ bool use_dma; - struct dma_pool *dpool; - struct qup_i2c_tag start_tag; - struct qup_i2c_bam brx; -@@ -1288,7 +1290,7 @@ static int qup_i2c_xfer_v2(struct i2c_ad - int num) - { - struct qup_i2c_dev *qup = i2c_get_adapdata(adap); -- int ret, len, idx = 0, use_dma = 0; -+ int ret, len, idx = 0; - - qup->bus_err = 0; - qup->qup_err = 0; -@@ -1317,13 +1319,12 @@ static int qup_i2c_xfer_v2(struct i2c_ad - len = (msgs[idx].len > qup->out_fifo_sz) || - (msgs[idx].len > qup->in_fifo_sz); - -- if ((!is_vmalloc_addr(msgs[idx].buf)) && len) { -- use_dma = 1; -- } else { -- use_dma = 0; -+ if (is_vmalloc_addr(msgs[idx].buf) || !len) - break; -- } - } -+ -+ if (idx == num) -+ qup->use_dma = true; - } - - idx = 0; -@@ -1347,15 +1348,17 @@ static int qup_i2c_xfer_v2(struct i2c_ad - - reinit_completion(&qup->xfer); - -- if (use_dma) { -+ if (qup->use_dma) { - ret = qup_i2c_bam_xfer(adap, &msgs[idx], num); -+ qup->use_dma = false; -+ break; - } else { - if (msgs[idx].flags & I2C_M_RD) - ret = qup_i2c_read_one_v2(qup, &msgs[idx]); - else - ret = qup_i2c_write_one_v2(qup, &msgs[idx]); - } -- } while ((idx++ < (num - 1)) && !use_dma && !ret); -+ } while ((idx++ < (num - 1)) && !ret); - - if (!ret) - ret = qup_i2c_change_state(qup, QUP_RESET_STATE); diff --git a/target/linux/ipq40xx/patches-4.14/088-0004-i2c-qup-remove-redundant-variables-for-BAM-SG-count.patch b/target/linux/ipq40xx/patches-4.14/088-0004-i2c-qup-remove-redundant-variables-for-BAM-SG-count.patch deleted file mode 100644 index e18af41789..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0004-i2c-qup-remove-redundant-variables-for-BAM-SG-count.patch +++ /dev/null @@ -1,174 +0,0 @@ -From 6d5f37f166bb07b04b4d42e9d1f5427b7931cd3c Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:44:53 +0530 -Subject: [PATCH 04/13] i2c: qup: remove redundant variables for BAM SG count - -The rx_nents and tx_nents are redundant. rx_buf and tx_buf can -be used for total number of SG entries. Since rx_buf and tx_buf -give the impression that it is buffer instead of count so rename -it to tx_cnt and rx_cnt for giving it more meaningful variable -name. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Austin Christ -Reviewed-by: Andy Gross -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 42 ++++++++++++++++-------------------- - 1 file changed, 18 insertions(+), 24 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -683,8 +683,8 @@ static int qup_i2c_bam_do_xfer(struct qu - struct dma_async_tx_descriptor *txd, *rxd = NULL; - int ret = 0, idx = 0, limit = QUP_READ_LIMIT; - dma_cookie_t cookie_rx, cookie_tx; -- u32 rx_nents = 0, tx_nents = 0, len, blocks, rem; -- u32 i, tlen, tx_len, tx_buf = 0, rx_buf = 0, off = 0; -+ u32 len, blocks, rem; -+ u32 i, tlen, tx_len, tx_cnt = 0, rx_cnt = 0, off = 0; - u8 *tags; - - while (idx < num) { -@@ -698,9 +698,6 @@ static int qup_i2c_bam_do_xfer(struct qu - rem = msg->len - (blocks - 1) * limit; - - if (msg->flags & I2C_M_RD) { -- rx_nents += (blocks * 2) + 1; -- tx_nents += 1; -- - while (qup->blk.pos < blocks) { - tlen = (i == (blocks - 1)) ? rem : limit; - tags = &qup->start_tag.start[off + len]; -@@ -708,14 +705,14 @@ static int qup_i2c_bam_do_xfer(struct qu - qup->blk.data_len -= tlen; - - /* scratch buf to read the start and len tags */ -- ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], -+ ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++], - &qup->brx.tag.start[0], - 2, qup, DMA_FROM_DEVICE); - - if (ret) - return ret; - -- ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], -+ ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++], - &msg->buf[limit * i], - tlen, qup, - DMA_FROM_DEVICE); -@@ -725,7 +722,7 @@ static int qup_i2c_bam_do_xfer(struct qu - i++; - qup->blk.pos = i; - } -- ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], -+ ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], - &qup->start_tag.start[off], - len, qup, DMA_TO_DEVICE); - if (ret) -@@ -733,28 +730,26 @@ static int qup_i2c_bam_do_xfer(struct qu - - off += len; - /* scratch buf to read the BAM EOT and FLUSH tags */ -- ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], -+ ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++], - &qup->brx.tag.start[0], - 2, qup, DMA_FROM_DEVICE); - if (ret) - return ret; - } else { -- tx_nents += (blocks * 2); -- - while (qup->blk.pos < blocks) { - tlen = (i == (blocks - 1)) ? rem : limit; - tags = &qup->start_tag.start[off + tx_len]; - len = qup_i2c_set_tags(tags, qup, msg, 1); - qup->blk.data_len -= tlen; - -- ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], -+ ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], - tags, len, - qup, DMA_TO_DEVICE); - if (ret) - return ret; - - tx_len += len; -- ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], -+ ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], - &msg->buf[limit * i], - tlen, qup, DMA_TO_DEVICE); - if (ret) -@@ -766,26 +761,25 @@ static int qup_i2c_bam_do_xfer(struct qu - - if (idx == (num - 1)) { - len = 1; -- if (rx_nents) { -+ if (rx_cnt) { - qup->btx.tag.start[0] = - QUP_BAM_INPUT_EOT; - len++; - } - qup->btx.tag.start[len - 1] = - QUP_BAM_FLUSH_STOP; -- ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], -+ ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], - &qup->btx.tag.start[0], - len, qup, DMA_TO_DEVICE); - if (ret) - return ret; -- tx_nents += 1; - } - } - idx++; - msg++; - } - -- txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_nents, -+ txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_cnt, - DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_PREP_FENCE); - if (!txd) { -@@ -794,7 +788,7 @@ static int qup_i2c_bam_do_xfer(struct qu - goto desc_err; - } - -- if (!rx_nents) { -+ if (!rx_cnt) { - txd->callback = qup_i2c_bam_cb; - txd->callback_param = qup; - } -@@ -807,9 +801,9 @@ static int qup_i2c_bam_do_xfer(struct qu - - dma_async_issue_pending(qup->btx.dma); - -- if (rx_nents) { -+ if (rx_cnt) { - rxd = dmaengine_prep_slave_sg(qup->brx.dma, qup->brx.sg, -- rx_nents, DMA_DEV_TO_MEM, -+ rx_cnt, DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT); - if (!rxd) { - dev_err(qup->dev, "failed to get rx desc\n"); -@@ -844,7 +838,7 @@ static int qup_i2c_bam_do_xfer(struct qu - goto desc_err; - } - -- if (rx_nents) -+ if (rx_cnt) - writel(QUP_BAM_INPUT_EOT, - qup->base + QUP_OUT_FIFO_BASE); - -@@ -862,10 +856,10 @@ static int qup_i2c_bam_do_xfer(struct qu - } - - desc_err: -- dma_unmap_sg(qup->dev, qup->btx.sg, tx_nents, DMA_TO_DEVICE); -+ dma_unmap_sg(qup->dev, qup->btx.sg, tx_cnt, DMA_TO_DEVICE); - -- if (rx_nents) -- dma_unmap_sg(qup->dev, qup->brx.sg, rx_nents, -+ if (rx_cnt) -+ dma_unmap_sg(qup->dev, qup->brx.sg, rx_cnt, - DMA_FROM_DEVICE); - - return ret; diff --git a/target/linux/ipq40xx/patches-4.14/088-0005-i2c-qup-schedule-EOT-and-FLUSH-tags-at-the-end-of-tr.patch b/target/linux/ipq40xx/patches-4.14/088-0005-i2c-qup-schedule-EOT-and-FLUSH-tags-at-the-end-of-tr.patch deleted file mode 100644 index cbede84cfe..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0005-i2c-qup-schedule-EOT-and-FLUSH-tags-at-the-end-of-tr.patch +++ /dev/null @@ -1,126 +0,0 @@ -From c5adc0fa63a930e3313c74bb7c1d4d158130eb41 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:44:54 +0530 -Subject: [PATCH 05/13] i2c: qup: schedule EOT and FLUSH tags at the end of - transfer - -The role of FLUSH and EOT tag is to flush already scheduled -descriptors in BAM HW in case of error. EOT is required only -when descriptors are scheduled in RX FIFO. If all the messages -are WRITE, then only FLUSH tag will be used. - -A single BAM transfer can have multiple read and write messages. -The EOT and FLUSH tags should be scheduled at the end of BAM HW -descriptors. Since the READ and WRITE can be present in any order -so for some of the cases, these tags are not being written -correctly. - -Following is one of the example - - READ, READ, READ, READ - -Currently EOT and FLUSH tags are being written after each READ. -If QUP gets NACK for first READ itself, then flush will be -triggered. It will look for first FLUSH tag in TX FIFO and will -stop there so only descriptors for first READ descriptors be -flushed. All the scheduled descriptors should be cleared to -generate BAM DMA completion. - -Now this patch is scheduling FLUSH and EOT only once after all the -descriptors. So, flush will clear all the scheduled descriptors and -BAM will generate the completion interrupt. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Sricharan R -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 39 ++++++++++++++++++++++-------------- - 1 file changed, 24 insertions(+), 15 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -551,7 +551,7 @@ static int qup_i2c_set_tags_smb(u16 addr - } - - static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup, -- struct i2c_msg *msg, int is_dma) -+ struct i2c_msg *msg) - { - u16 addr = i2c_8bit_addr_from_msg(msg); - int len = 0; -@@ -592,11 +592,6 @@ static int qup_i2c_set_tags(u8 *tags, st - else - tags[len++] = data_len; - -- if ((msg->flags & I2C_M_RD) && last && is_dma) { -- tags[len++] = QUP_BAM_INPUT_EOT; -- tags[len++] = QUP_BAM_FLUSH_STOP; -- } -- - return len; - } - -@@ -605,7 +600,7 @@ static int qup_i2c_issue_xfer_v2(struct - int data_len = 0, tag_len, index; - int ret; - -- tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg, 0); -+ tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg); - index = msg->len - qup->blk.data_len; - - /* only tags are written for read */ -@@ -701,7 +696,7 @@ static int qup_i2c_bam_do_xfer(struct qu - while (qup->blk.pos < blocks) { - tlen = (i == (blocks - 1)) ? rem : limit; - tags = &qup->start_tag.start[off + len]; -- len += qup_i2c_set_tags(tags, qup, msg, 1); -+ len += qup_i2c_set_tags(tags, qup, msg); - qup->blk.data_len -= tlen; - - /* scratch buf to read the start and len tags */ -@@ -729,17 +724,11 @@ static int qup_i2c_bam_do_xfer(struct qu - return ret; - - off += len; -- /* scratch buf to read the BAM EOT and FLUSH tags */ -- ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++], -- &qup->brx.tag.start[0], -- 2, qup, DMA_FROM_DEVICE); -- if (ret) -- return ret; - } else { - while (qup->blk.pos < blocks) { - tlen = (i == (blocks - 1)) ? rem : limit; - tags = &qup->start_tag.start[off + tx_len]; -- len = qup_i2c_set_tags(tags, qup, msg, 1); -+ len = qup_i2c_set_tags(tags, qup, msg); - qup->blk.data_len -= tlen; - - ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], -@@ -779,6 +768,26 @@ static int qup_i2c_bam_do_xfer(struct qu - msg++; - } - -+ /* schedule the EOT and FLUSH I2C tags */ -+ len = 1; -+ if (rx_cnt) { -+ qup->btx.tag.start[0] = QUP_BAM_INPUT_EOT; -+ len++; -+ -+ /* scratch buf to read the BAM EOT and FLUSH tags */ -+ ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++], -+ &qup->brx.tag.start[0], -+ 2, qup, DMA_FROM_DEVICE); -+ if (ret) -+ return ret; -+ } -+ -+ qup->btx.tag.start[len - 1] = QUP_BAM_FLUSH_STOP; -+ ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], &qup->btx.tag.start[0], -+ len, qup, DMA_TO_DEVICE); -+ if (ret) -+ return ret; -+ - txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_cnt, - DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_PREP_FENCE); diff --git a/target/linux/ipq40xx/patches-4.14/088-0006-i2c-qup-fix-the-transfer-length-for-BAM-RX-EOT-FLUSH.patch b/target/linux/ipq40xx/patches-4.14/088-0006-i2c-qup-fix-the-transfer-length-for-BAM-RX-EOT-FLUSH.patch deleted file mode 100644 index 6eb2d6a7b1..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0006-i2c-qup-fix-the-transfer-length-for-BAM-RX-EOT-FLUSH.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 7e6c35fe602df6821b3e7db5b1ba656162750fda Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:44:55 +0530 -Subject: [PATCH 06/13] i2c: qup: fix the transfer length for BAM RX EOT FLUSH - tags - -In case of FLUSH operation, BAM copies INPUT EOT FLUSH (0x94) -instead of normal EOT (0x93) tag in input data stream when an -input EOT tag is received during flush operation. So only one tag -will be written instead of 2 separate tags. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Andy Gross -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -774,10 +774,10 @@ static int qup_i2c_bam_do_xfer(struct qu - qup->btx.tag.start[0] = QUP_BAM_INPUT_EOT; - len++; - -- /* scratch buf to read the BAM EOT and FLUSH tags */ -+ /* scratch buf to read the BAM EOT FLUSH tags */ - ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++], - &qup->brx.tag.start[0], -- 2, qup, DMA_FROM_DEVICE); -+ 1, qup, DMA_FROM_DEVICE); - if (ret) - return ret; - } diff --git a/target/linux/ipq40xx/patches-4.14/088-0007-i2c-qup-proper-error-handling-for-i2c-error-in-BAM-m.patch b/target/linux/ipq40xx/patches-4.14/088-0007-i2c-qup-proper-error-handling-for-i2c-error-in-BAM-m.patch deleted file mode 100644 index a86f144caf..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0007-i2c-qup-proper-error-handling-for-i2c-error-in-BAM-m.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 3f450d3eea14799b14192231840c1753a660f150 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:44:56 +0530 -Subject: [PATCH 07/13] i2c: qup: proper error handling for i2c error in BAM - mode - -Currently the i2c error handling in BAM mode is not working -properly in stress condition. - -1. After an error, the FIFO are being written with FLUSH and - EOT tags which should not be required since already these tags - have been written in BAM descriptor itself. - -2. QUP state is being moved to RESET in IRQ handler in case - of error. When QUP HW encounters an error in BAM mode then it - moves the QUP STATE to PAUSE state. In this case, I2C_FLUSH - command needs to be executed while moving to RUN_STATE by writing - to the QUP_STATE register with the I2C_FLUSH bit set to 1. - -3. In Error case, sometimes, QUP generates more than one - interrupt which will trigger the complete again. After an error, - the flush operation will be scheduled after doing - reinit_completion which should be triggered by BAM IRQ callback. - If the second QUP IRQ comes during this time then it will call - the complete and the transfer function will assume the all the - BAM HW descriptors have been completed. - -4. The release DMA is being called after each error which - will free the DMA tx and rx channels. The error like NACK is very - common in I2C transfer and every time this will be overhead. Now, - since the error handling is proper so this release channel can be - completely avoided. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Sricharan R -Reviewed-by: Austin Christ -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 25 ++++++++++++++++--------- - 1 file changed, 16 insertions(+), 9 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -219,9 +219,24 @@ static irqreturn_t qup_i2c_interrupt(int - if (bus_err) - writel(bus_err, qup->base + QUP_I2C_STATUS); - -+ /* -+ * Check for BAM mode and returns if already error has come for current -+ * transfer. In Error case, sometimes, QUP generates more than one -+ * interrupt. -+ */ -+ if (qup->use_dma && (qup->qup_err || qup->bus_err)) -+ return IRQ_HANDLED; -+ - /* Reset the QUP State in case of error */ - if (qup_err || bus_err) { -- writel(QUP_RESET_STATE, qup->base + QUP_STATE); -+ /* -+ * Don’t reset the QUP state in case of BAM mode. The BAM -+ * flush operation needs to be scheduled in transfer function -+ * which will clear the remaining schedule descriptors in BAM -+ * HW FIFO and generates the BAM interrupt. -+ */ -+ if (!qup->use_dma) -+ writel(QUP_RESET_STATE, qup->base + QUP_STATE); - goto done; - } - -@@ -847,20 +862,12 @@ static int qup_i2c_bam_do_xfer(struct qu - goto desc_err; - } - -- if (rx_cnt) -- writel(QUP_BAM_INPUT_EOT, -- qup->base + QUP_OUT_FIFO_BASE); -- -- writel(QUP_BAM_FLUSH_STOP, qup->base + QUP_OUT_FIFO_BASE); -- - qup_i2c_flush(qup); - - /* wait for remaining interrupts to occur */ - if (!wait_for_completion_timeout(&qup->xfer, HZ)) - dev_err(qup->dev, "flush timed out\n"); - -- qup_i2c_rel_dma(qup); -- - ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO; - } - diff --git a/target/linux/ipq40xx/patches-4.14/088-0008-i2c-qup-use-the-complete-transfer-length-to-choose-D.patch b/target/linux/ipq40xx/patches-4.14/088-0008-i2c-qup-use-the-complete-transfer-length-to-choose-D.patch deleted file mode 100644 index 3d68695588..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0008-i2c-qup-use-the-complete-transfer-length-to-choose-D.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 08f15963bc751bc818294c0f75a9aaca299c4052 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:44:57 +0530 -Subject: [PATCH 08/13] i2c: qup: use the complete transfer length to choose - DMA mode - -Currently each message length in complete transfer is being -checked for determining DMA mode and if any of the message length -is less than FIFO length then non DMA mode is being used which -will increase overhead. DMA can be used for any length and it -should be determined with complete transfer length. Now, this -patch selects DMA mode if the total length is greater than FIFO -length. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Austin Christ -Reviewed-by: Andy Gross -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 13 +++++++------ - 1 file changed, 7 insertions(+), 6 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -1300,7 +1300,8 @@ static int qup_i2c_xfer_v2(struct i2c_ad - int num) - { - struct qup_i2c_dev *qup = i2c_get_adapdata(adap); -- int ret, len, idx = 0; -+ int ret, idx = 0; -+ unsigned int total_len = 0; - - qup->bus_err = 0; - qup->qup_err = 0; -@@ -1326,14 +1327,14 @@ static int qup_i2c_xfer_v2(struct i2c_ad - goto out; - } - -- len = (msgs[idx].len > qup->out_fifo_sz) || -- (msgs[idx].len > qup->in_fifo_sz); -- -- if (is_vmalloc_addr(msgs[idx].buf) || !len) -+ if (is_vmalloc_addr(msgs[idx].buf)) - break; -+ -+ total_len += msgs[idx].len; - } - -- if (idx == num) -+ if (idx == num && (total_len > qup->out_fifo_sz || -+ total_len > qup->in_fifo_sz)) - qup->use_dma = true; - } - diff --git a/target/linux/ipq40xx/patches-4.14/088-0009-i2c-qup-change-completion-timeout-according-to-trans.patch b/target/linux/ipq40xx/patches-4.14/088-0009-i2c-qup-change-completion-timeout-according-to-trans.patch deleted file mode 100644 index c95d20ec97..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0009-i2c-qup-change-completion-timeout-according-to-trans.patch +++ /dev/null @@ -1,61 +0,0 @@ -From ecb6e1e5f4352055a5761b945a833a925d51bf8d Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:44:58 +0530 -Subject: [PATCH 09/13] i2c: qup: change completion timeout according to - transfer length - -Currently the completion timeout is being taken according to -maximum transfer length which is too high if SCL is operating in -high frequency. This patch calculates timeout on the basis of -one-byte transfer time and uses the same for completion timeout. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Andy Gross -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 13 ++++++++++--- - 1 file changed, 10 insertions(+), 3 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -121,8 +121,12 @@ - #define MX_TX_RX_LEN SZ_64K - #define MX_BLOCKS (MX_TX_RX_LEN / QUP_READ_LIMIT) - --/* Max timeout in ms for 32k bytes */ --#define TOUT_MAX 300 -+/* -+ * Minimum transfer timeout for i2c transfers in seconds. It will be added on -+ * the top of maximum transfer time calculated from i2c bus speed to compensate -+ * the overheads. -+ */ -+#define TOUT_MIN 2 - - /* Default values. Use these if FW query fails */ - #define DEFAULT_CLK_FREQ 100000 -@@ -163,6 +167,7 @@ struct qup_i2c_dev { - int in_blk_sz; - - unsigned long one_byte_t; -+ unsigned long xfer_timeout; - struct qup_i2c_block blk; - - struct i2c_msg *msg; -@@ -849,7 +854,7 @@ static int qup_i2c_bam_do_xfer(struct qu - dma_async_issue_pending(qup->brx.dma); - } - -- if (!wait_for_completion_timeout(&qup->xfer, TOUT_MAX * HZ)) { -+ if (!wait_for_completion_timeout(&qup->xfer, qup->xfer_timeout)) { - dev_err(qup->dev, "normal trans timed out\n"); - ret = -ETIMEDOUT; - } -@@ -1605,6 +1610,8 @@ nodma: - */ - one_bit_t = (USEC_PER_SEC / clk_freq) + 1; - qup->one_byte_t = one_bit_t * 9; -+ qup->xfer_timeout = TOUT_MIN * HZ + -+ usecs_to_jiffies(MX_TX_RX_LEN * qup->one_byte_t); - - dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n", - qup->in_blk_sz, qup->in_fifo_sz, diff --git a/target/linux/ipq40xx/patches-4.14/088-0010-i2c-qup-fix-buffer-overflow-for-multiple-msg-of-maxi.patch b/target/linux/ipq40xx/patches-4.14/088-0010-i2c-qup-fix-buffer-overflow-for-multiple-msg-of-maxi.patch deleted file mode 100644 index e5d1edfb72..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0010-i2c-qup-fix-buffer-overflow-for-multiple-msg-of-maxi.patch +++ /dev/null @@ -1,311 +0,0 @@ -From 6f2f0f6465acbd59391c43352ff0df77df1f01db Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:44:59 +0530 -Subject: [PATCH 10/13] i2c: qup: fix buffer overflow for multiple msg of - maximum xfer len -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The BAM mode requires buffer for start tag data and tx, rx SG -list. Currently, this is being taken for maximum transfer length -(65K). But an I2C transfer can have multiple messages and each -message can be of this maximum length so the buffer overflow will -happen in this case. Since increasing buffer length won’t be -feasible since an I2C transfer can contain any number of messages -so this patch does following changes to make i2c transfers working -for multiple messages case. - -1. Calculate the required buffers for 2 maximum length messages - (65K * 2). -2. Split the descriptor formation and descriptor scheduling. - The idea is to fit as many messages in one DMA transfers for 65K - threshold value (max_xfer_sg_len). Whenever the sg_cnt is - crossing this, then schedule the BAM transfer and subsequent - transfer will again start from zero. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Andy Gross -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 194 ++++++++++++++++++++--------------- - 1 file changed, 110 insertions(+), 84 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -118,8 +118,12 @@ - #define ONE_BYTE 0x1 - #define QUP_I2C_MX_CONFIG_DURING_RUN BIT(31) - -+/* Maximum transfer length for single DMA descriptor */ - #define MX_TX_RX_LEN SZ_64K - #define MX_BLOCKS (MX_TX_RX_LEN / QUP_READ_LIMIT) -+/* Maximum transfer length for all DMA descriptors */ -+#define MX_DMA_TX_RX_LEN (2 * MX_TX_RX_LEN) -+#define MX_DMA_BLOCKS (MX_DMA_TX_RX_LEN / QUP_READ_LIMIT) - - /* - * Minimum transfer timeout for i2c transfers in seconds. It will be added on -@@ -150,6 +154,7 @@ struct qup_i2c_bam { - struct qup_i2c_tag tag; - struct dma_chan *dma; - struct scatterlist *sg; -+ unsigned int sg_cnt; - }; - - struct qup_i2c_dev { -@@ -188,6 +193,8 @@ struct qup_i2c_dev { - bool is_dma; - /* To check if the current transfer is using DMA */ - bool use_dma; -+ unsigned int max_xfer_sg_len; -+ unsigned int tag_buf_pos; - struct dma_pool *dpool; - struct qup_i2c_tag start_tag; - struct qup_i2c_bam brx; -@@ -692,102 +699,87 @@ static int qup_i2c_req_dma(struct qup_i2 - return 0; - } - --static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, -- int num) -+static int qup_i2c_bam_make_desc(struct qup_i2c_dev *qup, struct i2c_msg *msg) - { -- struct dma_async_tx_descriptor *txd, *rxd = NULL; -- int ret = 0, idx = 0, limit = QUP_READ_LIMIT; -- dma_cookie_t cookie_rx, cookie_tx; -- u32 len, blocks, rem; -- u32 i, tlen, tx_len, tx_cnt = 0, rx_cnt = 0, off = 0; -+ int ret = 0, limit = QUP_READ_LIMIT; -+ u32 len = 0, blocks, rem; -+ u32 i = 0, tlen, tx_len = 0; - u8 *tags; - -- while (idx < num) { -- tx_len = 0, len = 0, i = 0; -- -- qup->is_last = (idx == (num - 1)); -+ qup_i2c_set_blk_data(qup, msg); - -- qup_i2c_set_blk_data(qup, msg); -+ blocks = qup->blk.count; -+ rem = msg->len - (blocks - 1) * limit; - -- blocks = qup->blk.count; -- rem = msg->len - (blocks - 1) * limit; -+ if (msg->flags & I2C_M_RD) { -+ while (qup->blk.pos < blocks) { -+ tlen = (i == (blocks - 1)) ? rem : limit; -+ tags = &qup->start_tag.start[qup->tag_buf_pos + len]; -+ len += qup_i2c_set_tags(tags, qup, msg); -+ qup->blk.data_len -= tlen; -+ -+ /* scratch buf to read the start and len tags */ -+ ret = qup_sg_set_buf(&qup->brx.sg[qup->brx.sg_cnt++], -+ &qup->brx.tag.start[0], -+ 2, qup, DMA_FROM_DEVICE); - -- if (msg->flags & I2C_M_RD) { -- while (qup->blk.pos < blocks) { -- tlen = (i == (blocks - 1)) ? rem : limit; -- tags = &qup->start_tag.start[off + len]; -- len += qup_i2c_set_tags(tags, qup, msg); -- qup->blk.data_len -= tlen; -- -- /* scratch buf to read the start and len tags */ -- ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++], -- &qup->brx.tag.start[0], -- 2, qup, DMA_FROM_DEVICE); -- -- if (ret) -- return ret; -- -- ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++], -- &msg->buf[limit * i], -- tlen, qup, -- DMA_FROM_DEVICE); -- if (ret) -- return ret; -+ if (ret) -+ return ret; - -- i++; -- qup->blk.pos = i; -- } -- ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], -- &qup->start_tag.start[off], -- len, qup, DMA_TO_DEVICE); -+ ret = qup_sg_set_buf(&qup->brx.sg[qup->brx.sg_cnt++], -+ &msg->buf[limit * i], -+ tlen, qup, -+ DMA_FROM_DEVICE); - if (ret) - return ret; - -- off += len; -- } else { -- while (qup->blk.pos < blocks) { -- tlen = (i == (blocks - 1)) ? rem : limit; -- tags = &qup->start_tag.start[off + tx_len]; -- len = qup_i2c_set_tags(tags, qup, msg); -- qup->blk.data_len -= tlen; -- -- ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], -- tags, len, -- qup, DMA_TO_DEVICE); -- if (ret) -- return ret; -- -- tx_len += len; -- ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], -- &msg->buf[limit * i], -- tlen, qup, DMA_TO_DEVICE); -- if (ret) -- return ret; -- i++; -- qup->blk.pos = i; -- } -- off += tx_len; -+ i++; -+ qup->blk.pos = i; -+ } -+ ret = qup_sg_set_buf(&qup->btx.sg[qup->btx.sg_cnt++], -+ &qup->start_tag.start[qup->tag_buf_pos], -+ len, qup, DMA_TO_DEVICE); -+ if (ret) -+ return ret; - -- if (idx == (num - 1)) { -- len = 1; -- if (rx_cnt) { -- qup->btx.tag.start[0] = -- QUP_BAM_INPUT_EOT; -- len++; -- } -- qup->btx.tag.start[len - 1] = -- QUP_BAM_FLUSH_STOP; -- ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], -- &qup->btx.tag.start[0], -- len, qup, DMA_TO_DEVICE); -- if (ret) -- return ret; -- } -+ qup->tag_buf_pos += len; -+ } else { -+ while (qup->blk.pos < blocks) { -+ tlen = (i == (blocks - 1)) ? rem : limit; -+ tags = &qup->start_tag.start[qup->tag_buf_pos + tx_len]; -+ len = qup_i2c_set_tags(tags, qup, msg); -+ qup->blk.data_len -= tlen; -+ -+ ret = qup_sg_set_buf(&qup->btx.sg[qup->btx.sg_cnt++], -+ tags, len, -+ qup, DMA_TO_DEVICE); -+ if (ret) -+ return ret; -+ -+ tx_len += len; -+ ret = qup_sg_set_buf(&qup->btx.sg[qup->btx.sg_cnt++], -+ &msg->buf[limit * i], -+ tlen, qup, DMA_TO_DEVICE); -+ if (ret) -+ return ret; -+ i++; -+ qup->blk.pos = i; - } -- idx++; -- msg++; -+ -+ qup->tag_buf_pos += tx_len; - } - -+ return 0; -+} -+ -+static int qup_i2c_bam_schedule_desc(struct qup_i2c_dev *qup) -+{ -+ struct dma_async_tx_descriptor *txd, *rxd = NULL; -+ int ret = 0; -+ dma_cookie_t cookie_rx, cookie_tx; -+ u32 len = 0; -+ u32 tx_cnt = qup->btx.sg_cnt, rx_cnt = qup->brx.sg_cnt; -+ - /* schedule the EOT and FLUSH I2C tags */ - len = 1; - if (rx_cnt) { -@@ -886,11 +878,19 @@ desc_err: - return ret; - } - -+static void qup_i2c_bam_clear_tag_buffers(struct qup_i2c_dev *qup) -+{ -+ qup->btx.sg_cnt = 0; -+ qup->brx.sg_cnt = 0; -+ qup->tag_buf_pos = 0; -+} -+ - static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, - int num) - { - struct qup_i2c_dev *qup = i2c_get_adapdata(adap); - int ret = 0; -+ int idx = 0; - - enable_irq(qup->irq); - ret = qup_i2c_req_dma(qup); -@@ -913,9 +913,34 @@ static int qup_i2c_bam_xfer(struct i2c_a - goto out; - - writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); -+ qup_i2c_bam_clear_tag_buffers(qup); -+ -+ for (idx = 0; idx < num; idx++) { -+ qup->msg = msg + idx; -+ qup->is_last = idx == (num - 1); -+ -+ ret = qup_i2c_bam_make_desc(qup, qup->msg); -+ if (ret) -+ break; -+ -+ /* -+ * Make DMA descriptor and schedule the BAM transfer if its -+ * already crossed the maximum length. Since the memory for all -+ * tags buffers have been taken for 2 maximum possible -+ * transfers length so it will never cross the buffer actual -+ * length. -+ */ -+ if (qup->btx.sg_cnt > qup->max_xfer_sg_len || -+ qup->brx.sg_cnt > qup->max_xfer_sg_len || -+ qup->is_last) { -+ ret = qup_i2c_bam_schedule_desc(qup); -+ if (ret) -+ break; -+ -+ qup_i2c_bam_clear_tag_buffers(qup); -+ } -+ } - -- qup->msg = msg; -- ret = qup_i2c_bam_do_xfer(qup, qup->msg, num); - out: - disable_irq(qup->irq); - -@@ -1468,7 +1493,8 @@ static int qup_i2c_probe(struct platform - else if (ret != 0) - goto nodma; - -- blocks = (MX_BLOCKS << 1) + 1; -+ qup->max_xfer_sg_len = (MX_BLOCKS << 1); -+ blocks = (MX_DMA_BLOCKS << 1) + 1; - qup->btx.sg = devm_kzalloc(&pdev->dev, - sizeof(*qup->btx.sg) * blocks, - GFP_KERNEL); -@@ -1611,7 +1637,7 @@ nodma: - one_bit_t = (USEC_PER_SEC / clk_freq) + 1; - qup->one_byte_t = one_bit_t * 9; - qup->xfer_timeout = TOUT_MIN * HZ + -- usecs_to_jiffies(MX_TX_RX_LEN * qup->one_byte_t); -+ usecs_to_jiffies(MX_DMA_TX_RX_LEN * qup->one_byte_t); - - dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n", - qup->in_blk_sz, qup->in_fifo_sz, diff --git a/target/linux/ipq40xx/patches-4.14/088-0011-i2c-qup-send-NACK-for-last-read-sub-transfers.patch b/target/linux/ipq40xx/patches-4.14/088-0011-i2c-qup-send-NACK-for-last-read-sub-transfers.patch deleted file mode 100644 index 82973829f1..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0011-i2c-qup-send-NACK-for-last-read-sub-transfers.patch +++ /dev/null @@ -1,43 +0,0 @@ -From f7714b4e451bdcb7918b9aad14af22684ceac638 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:45:00 +0530 -Subject: [PATCH 11/13] i2c: qup: send NACK for last read sub transfers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -According to I2c specification, “If a master-receiver sends a -repeated START condition, it sends a not-acknowledge (A) just -before the repeated START condition”. QUP v2 supports sending -of NACK without stop with QUP_TAG_V2_DATARD_NACK so added the -same. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Austin Christ -Reviewed-by: Andy Gross -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -104,6 +104,7 @@ - #define QUP_TAG_V2_DATAWR 0x82 - #define QUP_TAG_V2_DATAWR_STOP 0x83 - #define QUP_TAG_V2_DATARD 0x85 -+#define QUP_TAG_V2_DATARD_NACK 0x86 - #define QUP_TAG_V2_DATARD_STOP 0x87 - - /* Status, Error flags */ -@@ -606,7 +607,9 @@ static int qup_i2c_set_tags(u8 *tags, st - tags[len++] = QUP_TAG_V2_DATAWR_STOP; - } else { - if (msg->flags & I2C_M_RD) -- tags[len++] = QUP_TAG_V2_DATARD; -+ tags[len++] = qup->blk.pos == (qup->blk.count - 1) ? -+ QUP_TAG_V2_DATARD_NACK : -+ QUP_TAG_V2_DATARD; - else - tags[len++] = QUP_TAG_V2_DATAWR; - } diff --git a/target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch b/target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch deleted file mode 100644 index 1690415265..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch +++ /dev/null @@ -1,579 +0,0 @@ -From fbfab1ab065879370541caf0e514987368eb41b2 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:45:01 +0530 -Subject: [PATCH 12/13] i2c: qup: reorganization of driver code to remove - polling for qup v1 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Following are the major issues in current driver code - -1. The current driver simply assumes the transfer completion - whenever its gets any non-error interrupts and then simply do the - polling of available/free bytes in FIFO. -2. The block mode is not working properly since no handling in - being done for OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ. - -Because of above, i2c v1 transfers of size greater than 32 are failing -with following error message - - i2c_qup 78b6000.i2c: timeout for fifo out full - -To make block mode working properly and move to use the interrupts -instead of polling, major code reorganization is required. Following -are the major changes done in this patch - -1. Remove the polling of TX FIFO free space and RX FIFO available - bytes and move to interrupts completely. QUP has QUP_MX_OUTPUT_DONE, - QUP_MX_INPUT_DONE, OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ - interrupts to handle FIFO’s properly so check all these interrupts. -2. During write, For FIFO mode, TX FIFO can be directly written - without checking for FIFO space. For block mode, the QUP will generate - OUT_BLOCK_WRITE_REQ interrupt whenever it has block size of available - space. -3. During read, both TX and RX FIFO will be used. TX will be used - for writing tags and RX will be used for receiving the data. In QUP, - TX and RX can operate in separate mode so configure modes accordingly. -4. For read FIFO mode, wait for QUP_MX_INPUT_DONE interrupt which - will be generated after all the bytes have been copied in RX FIFO. For - read Block mode, QUP will generate IN_BLOCK_READ_REQ interrupts - whenever it has block size of available data. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Sricharan R -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 366 +++++++++++++++++++++-------------- - 1 file changed, 223 insertions(+), 143 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -64,8 +64,11 @@ - #define QUP_IN_SVC_FLAG BIT(9) - #define QUP_MX_OUTPUT_DONE BIT(10) - #define QUP_MX_INPUT_DONE BIT(11) -+#define OUT_BLOCK_WRITE_REQ BIT(12) -+#define IN_BLOCK_READ_REQ BIT(13) - - /* I2C mini core related values */ -+#define QUP_NO_INPUT BIT(7) - #define QUP_CLOCK_AUTO_GATE BIT(13) - #define I2C_MINI_CORE (2 << 8) - #define I2C_N_VAL 15 -@@ -137,13 +140,36 @@ - #define DEFAULT_CLK_FREQ 100000 - #define DEFAULT_SRC_CLK 20000000 - -+/* -+ * count: no of blocks -+ * pos: current block number -+ * tx_tag_len: tx tag length for current block -+ * rx_tag_len: rx tag length for current block -+ * data_len: remaining data length for current message -+ * total_tx_len: total tx length including tag bytes for current QUP transfer -+ * total_rx_len: total rx length including tag bytes for current QUP transfer -+ * tx_fifo_free: number of free bytes in current QUP block write. -+ * fifo_available: number of available bytes in RX FIFO for current -+ * QUP block read -+ * rx_bytes_read: if all the bytes have been read from rx FIFO. -+ * is_tx_blk_mode: whether tx uses block or FIFO mode in case of non BAM xfer. -+ * is_rx_blk_mode: whether rx uses block or FIFO mode in case of non BAM xfer. -+ * tags: contains tx tag bytes for current QUP transfer -+ */ - struct qup_i2c_block { -- int count; -- int pos; -- int tx_tag_len; -- int rx_tag_len; -- int data_len; -- u8 tags[6]; -+ int count; -+ int pos; -+ int tx_tag_len; -+ int rx_tag_len; -+ int data_len; -+ int total_tx_len; -+ int total_rx_len; -+ int tx_fifo_free; -+ int fifo_available; -+ bool rx_bytes_read; -+ bool is_tx_blk_mode; -+ bool is_rx_blk_mode; -+ u8 tags[6]; - }; - - struct qup_i2c_tag { -@@ -186,6 +212,7 @@ struct qup_i2c_dev { - - /* To check if this is the last msg */ - bool is_last; -+ bool is_qup_v1; - - /* To configure when bus is in run state */ - int config_run; -@@ -202,11 +229,18 @@ struct qup_i2c_dev { - struct qup_i2c_bam btx; - - struct completion xfer; -+ /* function to write data in tx fifo */ -+ void (*write_tx_fifo)(struct qup_i2c_dev *qup); -+ /* function to read data from rx fifo */ -+ void (*read_rx_fifo)(struct qup_i2c_dev *qup); -+ /* function to write tags in tx fifo for i2c read transfer */ -+ void (*write_rx_tags)(struct qup_i2c_dev *qup); - }; - - static irqreturn_t qup_i2c_interrupt(int irq, void *dev) - { - struct qup_i2c_dev *qup = dev; -+ struct qup_i2c_block *blk = &qup->blk; - u32 bus_err; - u32 qup_err; - u32 opflags; -@@ -253,12 +287,48 @@ static irqreturn_t qup_i2c_interrupt(int - goto done; - } - -- if (opflags & QUP_IN_SVC_FLAG) -- writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL); -+ if (!qup->is_qup_v1) -+ goto done; - -- if (opflags & QUP_OUT_SVC_FLAG) -+ if (opflags & QUP_OUT_SVC_FLAG) { - writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL); - -+ if (opflags & OUT_BLOCK_WRITE_REQ) { -+ blk->tx_fifo_free += qup->out_blk_sz; -+ if (qup->msg->flags & I2C_M_RD) -+ qup->write_rx_tags(qup); -+ else -+ qup->write_tx_fifo(qup); -+ } -+ } -+ -+ if (opflags & QUP_IN_SVC_FLAG) { -+ writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL); -+ -+ if (!blk->is_rx_blk_mode) { -+ blk->fifo_available += qup->in_fifo_sz; -+ qup->read_rx_fifo(qup); -+ } else if (opflags & IN_BLOCK_READ_REQ) { -+ blk->fifo_available += qup->in_blk_sz; -+ qup->read_rx_fifo(qup); -+ } -+ } -+ -+ if (qup->msg->flags & I2C_M_RD) { -+ if (!blk->rx_bytes_read) -+ return IRQ_HANDLED; -+ } else { -+ /* -+ * Ideally, QUP_MAX_OUTPUT_DONE_FLAG should be checked -+ * for FIFO mode also. But, QUP_MAX_OUTPUT_DONE_FLAG lags -+ * behind QUP_OUTPUT_SERVICE_FLAG sometimes. The only reason -+ * of interrupt for write message in FIFO mode is -+ * QUP_MAX_OUTPUT_DONE_FLAG condition. -+ */ -+ if (blk->is_tx_blk_mode && !(opflags & QUP_MX_OUTPUT_DONE)) -+ return IRQ_HANDLED; -+ } -+ - done: - qup->qup_err = qup_err; - qup->bus_err = bus_err; -@@ -324,6 +394,28 @@ static int qup_i2c_change_state(struct q - return 0; - } - -+/* Check if I2C bus returns to IDLE state */ -+static int qup_i2c_bus_active(struct qup_i2c_dev *qup, int len) -+{ -+ unsigned long timeout; -+ u32 status; -+ int ret = 0; -+ -+ timeout = jiffies + len * 4; -+ for (;;) { -+ status = readl(qup->base + QUP_I2C_STATUS); -+ if (!(status & I2C_STATUS_BUS_ACTIVE)) -+ break; -+ -+ if (time_after(jiffies, timeout)) -+ ret = -ETIMEDOUT; -+ -+ usleep_range(len, len * 2); -+ } -+ -+ return ret; -+} -+ - /** - * qup_i2c_wait_ready - wait for a give number of bytes in tx/rx path - * @qup: The qup_i2c_dev device -@@ -394,23 +486,6 @@ static void qup_i2c_set_write_mode_v2(st - } - } - --static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg) --{ -- /* Number of entries to shift out, including the start */ -- int total = msg->len + 1; -- -- if (total < qup->out_fifo_sz) { -- /* FIFO mode */ -- writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); -- writel(total, qup->base + QUP_MX_WRITE_CNT); -- } else { -- /* BLOCK mode (transfer data on chunks) */ -- writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN, -- qup->base + QUP_IO_MODE); -- writel(total, qup->base + QUP_MX_OUTPUT_CNT); -- } --} -- - static int check_for_fifo_space(struct qup_i2c_dev *qup) - { - int ret; -@@ -443,28 +518,25 @@ out: - return ret; - } - --static int qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg) -+static void qup_i2c_write_tx_fifo_v1(struct qup_i2c_dev *qup) - { -+ struct qup_i2c_block *blk = &qup->blk; -+ struct i2c_msg *msg = qup->msg; - u32 addr = msg->addr << 1; - u32 qup_tag; - int idx; - u32 val; -- int ret = 0; - - if (qup->pos == 0) { - val = QUP_TAG_START | addr; - idx = 1; -+ blk->tx_fifo_free--; - } else { - val = 0; - idx = 0; - } - -- while (qup->pos < msg->len) { -- /* Check that there's space in the FIFO for our pair */ -- ret = check_for_fifo_space(qup); -- if (ret) -- return ret; -- -+ while (blk->tx_fifo_free && qup->pos < msg->len) { - if (qup->pos == msg->len - 1) - qup_tag = QUP_TAG_STOP; - else -@@ -481,11 +553,8 @@ static int qup_i2c_issue_write(struct qu - - qup->pos++; - idx++; -+ blk->tx_fifo_free--; - } -- -- ret = qup_i2c_change_state(qup, QUP_RUN_STATE); -- -- return ret; - } - - static void qup_i2c_set_blk_data(struct qup_i2c_dev *qup, -@@ -1006,64 +1075,6 @@ err: - return ret; - } - --static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) --{ -- int ret; -- -- qup->msg = msg; -- qup->pos = 0; -- -- enable_irq(qup->irq); -- -- qup_i2c_set_write_mode(qup, msg); -- -- ret = qup_i2c_change_state(qup, QUP_RUN_STATE); -- if (ret) -- goto err; -- -- writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); -- -- do { -- ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); -- if (ret) -- goto err; -- -- ret = qup_i2c_issue_write(qup, msg); -- if (ret) -- goto err; -- -- ret = qup_i2c_change_state(qup, QUP_RUN_STATE); -- if (ret) -- goto err; -- -- ret = qup_i2c_wait_for_complete(qup, msg); -- if (ret) -- goto err; -- } while (qup->pos < msg->len); -- -- /* Wait for the outstanding data in the fifo to drain */ -- ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE); --err: -- disable_irq(qup->irq); -- qup->msg = NULL; -- -- return ret; --} -- --static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len) --{ -- if (len < qup->in_fifo_sz) { -- /* FIFO mode */ -- writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); -- writel(len, qup->base + QUP_MX_READ_CNT); -- } else { -- /* BLOCK mode (transfer data on chunks) */ -- writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN, -- qup->base + QUP_IO_MODE); -- writel(len, qup->base + QUP_MX_INPUT_CNT); -- } --} -- - static void qup_i2c_set_read_mode_v2(struct qup_i2c_dev *qup, int len) - { - int tx_len = qup->blk.tx_tag_len; -@@ -1086,44 +1097,27 @@ static void qup_i2c_set_read_mode_v2(str - } - } - --static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg) --{ -- u32 addr, len, val; -- -- addr = i2c_8bit_addr_from_msg(msg); -- -- /* 0 is used to specify a length 256 (QUP_READ_LIMIT) */ -- len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len; -- -- val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr; -- writel(val, qup->base + QUP_OUT_FIFO_BASE); --} -- -- --static int qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg) -+static void qup_i2c_read_rx_fifo_v1(struct qup_i2c_dev *qup) - { -+ struct qup_i2c_block *blk = &qup->blk; -+ struct i2c_msg *msg = qup->msg; - u32 val = 0; -- int idx; -- int ret = 0; -+ int idx = 0; - -- for (idx = 0; qup->pos < msg->len; idx++) { -+ while (blk->fifo_available && qup->pos < msg->len) { - if ((idx & 1) == 0) { -- /* Check that FIFO have data */ -- ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY, -- SET_BIT, 4 * ONE_BYTE); -- if (ret) -- return ret; -- - /* Reading 2 words at time */ - val = readl(qup->base + QUP_IN_FIFO_BASE); -- - msg->buf[qup->pos++] = val & 0xFF; - } else { - msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT; - } -+ idx++; -+ blk->fifo_available--; - } - -- return ret; -+ if (qup->pos == msg->len) -+ blk->rx_bytes_read = true; - } - - static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup, -@@ -1224,49 +1218,130 @@ err: - return ret; - } - --static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) -+static void qup_i2c_write_rx_tags_v1(struct qup_i2c_dev *qup) - { -- int ret; -+ struct i2c_msg *msg = qup->msg; -+ u32 addr, len, val; - -- qup->msg = msg; -- qup->pos = 0; -+ addr = i2c_8bit_addr_from_msg(msg); - -- enable_irq(qup->irq); -- qup_i2c_set_read_mode(qup, msg->len); -+ /* 0 is used to specify a length 256 (QUP_READ_LIMIT) */ -+ len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len; -+ -+ val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr; -+ writel(val, qup->base + QUP_OUT_FIFO_BASE); -+} -+ -+static void qup_i2c_conf_v1(struct qup_i2c_dev *qup) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ u32 qup_config = I2C_MINI_CORE | I2C_N_VAL; -+ u32 io_mode = QUP_REPACK_EN; -+ -+ blk->is_tx_blk_mode = -+ blk->total_tx_len > qup->out_fifo_sz ? true : false; -+ blk->is_rx_blk_mode = -+ blk->total_rx_len > qup->in_fifo_sz ? true : false; -+ -+ if (blk->is_tx_blk_mode) { -+ io_mode |= QUP_OUTPUT_BLK_MODE; -+ writel(0, qup->base + QUP_MX_WRITE_CNT); -+ writel(blk->total_tx_len, qup->base + QUP_MX_OUTPUT_CNT); -+ } else { -+ writel(0, qup->base + QUP_MX_OUTPUT_CNT); -+ writel(blk->total_tx_len, qup->base + QUP_MX_WRITE_CNT); -+ } -+ -+ if (blk->total_rx_len) { -+ if (blk->is_rx_blk_mode) { -+ io_mode |= QUP_INPUT_BLK_MODE; -+ writel(0, qup->base + QUP_MX_READ_CNT); -+ writel(blk->total_rx_len, qup->base + QUP_MX_INPUT_CNT); -+ } else { -+ writel(0, qup->base + QUP_MX_INPUT_CNT); -+ writel(blk->total_rx_len, qup->base + QUP_MX_READ_CNT); -+ } -+ } else { -+ qup_config |= QUP_NO_INPUT; -+ } -+ -+ writel(qup_config, qup->base + QUP_CONFIG); -+ writel(io_mode, qup->base + QUP_IO_MODE); -+} - -+static void qup_i2c_clear_blk_v1(struct qup_i2c_block *blk) -+{ -+ blk->tx_fifo_free = 0; -+ blk->fifo_available = 0; -+ blk->rx_bytes_read = false; -+} -+ -+static int qup_i2c_conf_xfer_v1(struct qup_i2c_dev *qup, bool is_rx) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ int ret; -+ -+ qup_i2c_clear_blk_v1(blk); -+ qup_i2c_conf_v1(qup); - ret = qup_i2c_change_state(qup, QUP_RUN_STATE); - if (ret) -- goto err; -+ return ret; - - writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); - - ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); - if (ret) -- goto err; -+ return ret; -+ -+ reinit_completion(&qup->xfer); -+ enable_irq(qup->irq); -+ if (!blk->is_tx_blk_mode) { -+ blk->tx_fifo_free = qup->out_fifo_sz; - -- qup_i2c_issue_read(qup, msg); -+ if (is_rx) -+ qup_i2c_write_rx_tags_v1(qup); -+ else -+ qup_i2c_write_tx_fifo_v1(qup); -+ } - - ret = qup_i2c_change_state(qup, QUP_RUN_STATE); - if (ret) - goto err; - -- do { -- ret = qup_i2c_wait_for_complete(qup, msg); -- if (ret) -- goto err; -+ ret = qup_i2c_wait_for_complete(qup, qup->msg); -+ if (ret) -+ goto err; - -- ret = qup_i2c_read_fifo(qup, msg); -- if (ret) -- goto err; -- } while (qup->pos < msg->len); -+ ret = qup_i2c_bus_active(qup, ONE_BYTE); - - err: - disable_irq(qup->irq); -- qup->msg = NULL; -- - return ret; - } - -+static int qup_i2c_write_one(struct qup_i2c_dev *qup) -+{ -+ struct i2c_msg *msg = qup->msg; -+ struct qup_i2c_block *blk = &qup->blk; -+ -+ qup->pos = 0; -+ blk->total_tx_len = msg->len + 1; -+ blk->total_rx_len = 0; -+ -+ return qup_i2c_conf_xfer_v1(qup, false); -+} -+ -+static int qup_i2c_read_one(struct qup_i2c_dev *qup) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ -+ qup->pos = 0; -+ blk->total_tx_len = 2; -+ blk->total_rx_len = qup->msg->len; -+ -+ return qup_i2c_conf_xfer_v1(qup, true); -+} -+ - static int qup_i2c_xfer(struct i2c_adapter *adap, - struct i2c_msg msgs[], - int num) -@@ -1305,10 +1380,11 @@ static int qup_i2c_xfer(struct i2c_adapt - goto out; - } - -+ qup->msg = &msgs[idx]; - if (msgs[idx].flags & I2C_M_RD) -- ret = qup_i2c_read_one(qup, &msgs[idx]); -+ ret = qup_i2c_read_one(qup); - else -- ret = qup_i2c_write_one(qup, &msgs[idx]); -+ ret = qup_i2c_write_one(qup); - - if (ret) - break; -@@ -1487,6 +1563,10 @@ static int qup_i2c_probe(struct platform - if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) { - qup->adap.algo = &qup_i2c_algo; - qup->adap.quirks = &qup_i2c_quirks; -+ qup->is_qup_v1 = true; -+ qup->write_tx_fifo = qup_i2c_write_tx_fifo_v1; -+ qup->read_rx_fifo = qup_i2c_read_rx_fifo_v1; -+ qup->write_rx_tags = qup_i2c_write_rx_tags_v1; - } else { - qup->adap.algo = &qup_i2c_algo_v2; - ret = qup_i2c_req_dma(qup); diff --git a/target/linux/ipq40xx/patches-4.14/088-0013-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch b/target/linux/ipq40xx/patches-4.14/088-0013-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch deleted file mode 100644 index 6d32882117..0000000000 --- a/target/linux/ipq40xx/patches-4.14/088-0013-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch +++ /dev/null @@ -1,1154 +0,0 @@ -From 7545c7dba169c4c29ba5f6ab8706267a84c0febe Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 12 Mar 2018 18:45:02 +0530 -Subject: [PATCH 13/13] i2c: qup: reorganization of driver code to remove - polling for qup v2 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Following are the major issues in current driver code - -1. The current driver simply assumes the transfer completion - whenever its gets any non-error interrupts and then simply do the - polling of available/free bytes in FIFO. -2. The block mode is not working properly since no handling in - being done for OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_READ. -3. An i2c transfer can contain multiple message and QUP v2 - supports reconfiguration during run in which the mode should be same - for all the sub transfer. Currently the mode is being programmed - before every sub transfer which is functionally wrong. If one message - is less than FIFO length and other message is greater than FIFO - length, then transfers will fail. - -Because of above, i2c v2 transfers of size greater than 64 are failing -with following error message - - i2c_qup 78b6000.i2c: timeout for fifo out full - -To make block mode working properly and move to use the interrupts -instead of polling, major code reorganization is required. Following -are the major changes done in this patch - -1. Remove the polling of TX FIFO free space and RX FIFO available - bytes and move to interrupts completely. QUP has QUP_MX_OUTPUT_DONE, - QUP_MX_INPUT_DONE, OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ - interrupts to handle FIFO’s properly so check all these interrupts. -2. Determine the mode for transfer before starting by checking - all the tx/rx data length in each message. The complete message can be - transferred either in DMA mode or Programmed IO by FIFO/Block mode. - in DMA mode, both tx and rx uses same mode but in PIO mode, the TX and - RX can be in different mode. -3. During write, For FIFO mode, TX FIFO can be directly written - without checking for FIFO space. For block mode, the QUP will generate - OUT_BLOCK_WRITE_REQ interrupt whenever it has block size of available - space. -4. During read, both TX and RX FIFO will be used. TX will be used - for writing tags and RX will be used for receiving the data. In QUP, - TX and RX can operate in separate mode so configure modes accordingly. -5. For read FIFO mode, wait for QUP_MX_INPUT_DONE interrupt which - will be generated after all the bytes have been copied in RX FIFO. For - read Block mode, QUP will generate IN_BLOCK_READ_REQ interrupts - whenever it has block size of available data. -6. Split the transfer in chunk of one QUP block size(256 bytes) - and schedule each block separately. QUP v2 supports reconfiguration - during run in which QUP can transfer multiple blocks without issuing a - stop events. -7. Port the SMBus block read support for new code changes. - -Signed-off-by: Abhishek Sahu -Reviewed-by: Sricharan R -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-qup.c | 900 ++++++++++++++++++++--------------- - 1 file changed, 515 insertions(+), 385 deletions(-) - ---- a/drivers/i2c/busses/i2c-qup.c -+++ b/drivers/i2c/busses/i2c-qup.c -@@ -141,17 +141,40 @@ - #define DEFAULT_SRC_CLK 20000000 - - /* -+ * Max tags length (start, stop and maximum 2 bytes address) for each QUP -+ * data transfer -+ */ -+#define QUP_MAX_TAGS_LEN 4 -+/* Max data length for each DATARD tags */ -+#define RECV_MAX_DATA_LEN 254 -+/* TAG length for DATA READ in RX FIFO */ -+#define READ_RX_TAGS_LEN 2 -+ -+/* - * count: no of blocks - * pos: current block number - * tx_tag_len: tx tag length for current block - * rx_tag_len: rx tag length for current block - * data_len: remaining data length for current message -+ * cur_blk_len: data length for current block - * total_tx_len: total tx length including tag bytes for current QUP transfer - * total_rx_len: total rx length including tag bytes for current QUP transfer -+ * tx_fifo_data_pos: current byte number in TX FIFO word - * tx_fifo_free: number of free bytes in current QUP block write. -+ * rx_fifo_data_pos: current byte number in RX FIFO word - * fifo_available: number of available bytes in RX FIFO for current - * QUP block read -+ * tx_fifo_data: QUP TX FIFO write works on word basis (4 bytes). New byte write -+ * to TX FIFO will be appended in this data and will be written to -+ * TX FIFO when all the 4 bytes are available. -+ * rx_fifo_data: QUP RX FIFO read works on word basis (4 bytes). This will -+ * contains the 4 bytes of RX data. -+ * cur_data: pointer to tell cur data position for current message -+ * cur_tx_tags: pointer to tell cur position in tags -+ * tx_tags_sent: all tx tag bytes have been written in FIFO word -+ * send_last_word: for tx FIFO, last word send is pending in current block - * rx_bytes_read: if all the bytes have been read from rx FIFO. -+ * rx_tags_fetched: all the rx tag bytes have been fetched from rx fifo word - * is_tx_blk_mode: whether tx uses block or FIFO mode in case of non BAM xfer. - * is_rx_blk_mode: whether rx uses block or FIFO mode in case of non BAM xfer. - * tags: contains tx tag bytes for current QUP transfer -@@ -162,10 +185,20 @@ struct qup_i2c_block { - int tx_tag_len; - int rx_tag_len; - int data_len; -+ int cur_blk_len; - int total_tx_len; - int total_rx_len; -+ int tx_fifo_data_pos; - int tx_fifo_free; -+ int rx_fifo_data_pos; - int fifo_available; -+ u32 tx_fifo_data; -+ u32 rx_fifo_data; -+ u8 *cur_data; -+ u8 *cur_tx_tags; -+ bool tx_tags_sent; -+ bool send_last_word; -+ bool rx_tags_fetched; - bool rx_bytes_read; - bool is_tx_blk_mode; - bool is_rx_blk_mode; -@@ -198,6 +231,7 @@ struct qup_i2c_dev { - int out_blk_sz; - int in_blk_sz; - -+ int blk_xfer_limit; - unsigned long one_byte_t; - unsigned long xfer_timeout; - struct qup_i2c_block blk; -@@ -212,10 +246,10 @@ struct qup_i2c_dev { - - /* To check if this is the last msg */ - bool is_last; -- bool is_qup_v1; -+ bool is_smbus_read; - - /* To configure when bus is in run state */ -- int config_run; -+ u32 config_run; - - /* dma parameters */ - bool is_dma; -@@ -223,6 +257,8 @@ struct qup_i2c_dev { - bool use_dma; - unsigned int max_xfer_sg_len; - unsigned int tag_buf_pos; -+ /* The threshold length above which block mode will be used */ -+ unsigned int blk_mode_threshold; - struct dma_pool *dpool; - struct qup_i2c_tag start_tag; - struct qup_i2c_bam brx; -@@ -287,9 +323,6 @@ static irqreturn_t qup_i2c_interrupt(int - goto done; - } - -- if (!qup->is_qup_v1) -- goto done; -- - if (opflags & QUP_OUT_SVC_FLAG) { - writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL); - -@@ -416,108 +449,6 @@ static int qup_i2c_bus_active(struct qup - return ret; - } - --/** -- * qup_i2c_wait_ready - wait for a give number of bytes in tx/rx path -- * @qup: The qup_i2c_dev device -- * @op: The bit/event to wait on -- * @val: value of the bit to wait on, 0 or 1 -- * @len: The length the bytes to be transferred -- */ --static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val, -- int len) --{ -- unsigned long timeout; -- u32 opflags; -- u32 status; -- u32 shift = __ffs(op); -- int ret = 0; -- -- len *= qup->one_byte_t; -- /* timeout after a wait of twice the max time */ -- timeout = jiffies + len * 4; -- -- for (;;) { -- opflags = readl(qup->base + QUP_OPERATIONAL); -- status = readl(qup->base + QUP_I2C_STATUS); -- -- if (((opflags & op) >> shift) == val) { -- if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) { -- if (!(status & I2C_STATUS_BUS_ACTIVE)) { -- ret = 0; -- goto done; -- } -- } else { -- ret = 0; -- goto done; -- } -- } -- -- if (time_after(jiffies, timeout)) { -- ret = -ETIMEDOUT; -- goto done; -- } -- usleep_range(len, len * 2); -- } -- --done: -- if (qup->bus_err || qup->qup_err) -- ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO; -- -- return ret; --} -- --static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup, -- struct i2c_msg *msg) --{ -- /* Number of entries to shift out, including the tags */ -- int total = msg->len + qup->blk.tx_tag_len; -- -- total |= qup->config_run; -- -- if (total < qup->out_fifo_sz) { -- /* FIFO mode */ -- writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); -- writel(total, qup->base + QUP_MX_WRITE_CNT); -- } else { -- /* BLOCK mode (transfer data on chunks) */ -- writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN, -- qup->base + QUP_IO_MODE); -- writel(total, qup->base + QUP_MX_OUTPUT_CNT); -- } --} -- --static int check_for_fifo_space(struct qup_i2c_dev *qup) --{ -- int ret; -- -- ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); -- if (ret) -- goto out; -- -- ret = qup_i2c_wait_ready(qup, QUP_OUT_FULL, -- RESET_BIT, 4 * ONE_BYTE); -- if (ret) { -- /* Fifo is full. Drain out the fifo */ -- ret = qup_i2c_change_state(qup, QUP_RUN_STATE); -- if (ret) -- goto out; -- -- ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, -- RESET_BIT, 256 * ONE_BYTE); -- if (ret) { -- dev_err(qup->dev, "timeout for fifo out full"); -- goto out; -- } -- -- ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); -- if (ret) -- goto out; -- } -- --out: -- return ret; --} -- - static void qup_i2c_write_tx_fifo_v1(struct qup_i2c_dev *qup) - { - struct qup_i2c_block *blk = &qup->blk; -@@ -560,60 +491,17 @@ static void qup_i2c_write_tx_fifo_v1(str - static void qup_i2c_set_blk_data(struct qup_i2c_dev *qup, - struct i2c_msg *msg) - { -- memset(&qup->blk, 0, sizeof(qup->blk)); -- -+ qup->blk.pos = 0; - qup->blk.data_len = msg->len; -- qup->blk.count = (msg->len + QUP_READ_LIMIT - 1) / QUP_READ_LIMIT; -- -- /* 4 bytes for first block and 2 writes for rest */ -- qup->blk.tx_tag_len = 4 + (qup->blk.count - 1) * 2; -- -- /* There are 2 tag bytes that are read in to fifo for every block */ -- if (msg->flags & I2C_M_RD) -- qup->blk.rx_tag_len = qup->blk.count * 2; --} -- --static int qup_i2c_send_data(struct qup_i2c_dev *qup, int tlen, u8 *tbuf, -- int dlen, u8 *dbuf) --{ -- u32 val = 0, idx = 0, pos = 0, i = 0, t; -- int len = tlen + dlen; -- u8 *buf = tbuf; -- int ret = 0; -- -- while (len > 0) { -- ret = check_for_fifo_space(qup); -- if (ret) -- return ret; -- -- t = (len >= 4) ? 4 : len; -- -- while (idx < t) { -- if (!i && (pos >= tlen)) { -- buf = dbuf; -- pos = 0; -- i = 1; -- } -- val |= buf[pos++] << (idx++ * 8); -- } -- -- writel(val, qup->base + QUP_OUT_FIFO_BASE); -- idx = 0; -- val = 0; -- len -= 4; -- } -- -- ret = qup_i2c_change_state(qup, QUP_RUN_STATE); -- -- return ret; -+ qup->blk.count = DIV_ROUND_UP(msg->len, qup->blk_xfer_limit); - } - - static int qup_i2c_get_data_len(struct qup_i2c_dev *qup) - { - int data_len; - -- if (qup->blk.data_len > QUP_READ_LIMIT) -- data_len = QUP_READ_LIMIT; -+ if (qup->blk.data_len > qup->blk_xfer_limit) -+ data_len = qup->blk_xfer_limit; - else - data_len = qup->blk.data_len; - -@@ -630,9 +518,9 @@ static int qup_i2c_set_tags_smb(u16 addr - { - int len = 0; - -- if (msg->len > 1) { -+ if (qup->is_smbus_read) { - tags[len++] = QUP_TAG_V2_DATARD_STOP; -- tags[len++] = qup_i2c_get_data_len(qup) - 1; -+ tags[len++] = qup_i2c_get_data_len(qup); - } else { - tags[len++] = QUP_TAG_V2_START; - tags[len++] = addr & 0xff; -@@ -694,24 +582,6 @@ static int qup_i2c_set_tags(u8 *tags, st - return len; - } - --static int qup_i2c_issue_xfer_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg) --{ -- int data_len = 0, tag_len, index; -- int ret; -- -- tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg); -- index = msg->len - qup->blk.data_len; -- -- /* only tags are written for read */ -- if (!(msg->flags & I2C_M_RD)) -- data_len = qup_i2c_get_data_len(qup); -- -- ret = qup_i2c_send_data(qup, tag_len, qup->blk.tags, -- data_len, &msg->buf[index]); -- qup->blk.data_len -= data_len; -- -- return ret; --} - - static void qup_i2c_bam_cb(void *data) - { -@@ -778,6 +648,7 @@ static int qup_i2c_bam_make_desc(struct - u32 i = 0, tlen, tx_len = 0; - u8 *tags; - -+ qup->blk_xfer_limit = QUP_READ_LIMIT; - qup_i2c_set_blk_data(qup, msg); - - blocks = qup->blk.count; -@@ -1026,7 +897,7 @@ static int qup_i2c_wait_for_complete(str - unsigned long left; - int ret = 0; - -- left = wait_for_completion_timeout(&qup->xfer, HZ); -+ left = wait_for_completion_timeout(&qup->xfer, qup->xfer_timeout); - if (!left) { - writel(1, qup->base + QUP_SW_RESET); - ret = -ETIMEDOUT; -@@ -1038,65 +909,6 @@ static int qup_i2c_wait_for_complete(str - return ret; - } - --static int qup_i2c_write_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg) --{ -- int ret = 0; -- -- qup->msg = msg; -- qup->pos = 0; -- enable_irq(qup->irq); -- qup_i2c_set_blk_data(qup, msg); -- qup_i2c_set_write_mode_v2(qup, msg); -- -- ret = qup_i2c_change_state(qup, QUP_RUN_STATE); -- if (ret) -- goto err; -- -- writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); -- -- do { -- ret = qup_i2c_issue_xfer_v2(qup, msg); -- if (ret) -- goto err; -- -- ret = qup_i2c_wait_for_complete(qup, msg); -- if (ret) -- goto err; -- -- qup->blk.pos++; -- } while (qup->blk.pos < qup->blk.count); -- -- ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE); -- --err: -- disable_irq(qup->irq); -- qup->msg = NULL; -- -- return ret; --} -- --static void qup_i2c_set_read_mode_v2(struct qup_i2c_dev *qup, int len) --{ -- int tx_len = qup->blk.tx_tag_len; -- -- len += qup->blk.rx_tag_len; -- len |= qup->config_run; -- tx_len |= qup->config_run; -- -- if (len < qup->in_fifo_sz) { -- /* FIFO mode */ -- writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); -- writel(tx_len, qup->base + QUP_MX_WRITE_CNT); -- writel(len, qup->base + QUP_MX_READ_CNT); -- } else { -- /* BLOCK mode (transfer data on chunks) */ -- writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN, -- qup->base + QUP_IO_MODE); -- writel(tx_len, qup->base + QUP_MX_OUTPUT_CNT); -- writel(len, qup->base + QUP_MX_INPUT_CNT); -- } --} -- - static void qup_i2c_read_rx_fifo_v1(struct qup_i2c_dev *qup) - { - struct qup_i2c_block *blk = &qup->blk; -@@ -1120,104 +932,6 @@ static void qup_i2c_read_rx_fifo_v1(stru - blk->rx_bytes_read = true; - } - --static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup, -- struct i2c_msg *msg) --{ -- u32 val; -- int idx, pos = 0, ret = 0, total, msg_offset = 0; -- -- /* -- * If the message length is already read in -- * the first byte of the buffer, account for -- * that by setting the offset -- */ -- if (qup_i2c_check_msg_len(msg) && (msg->len > 1)) -- msg_offset = 1; -- total = qup_i2c_get_data_len(qup); -- total -= msg_offset; -- -- /* 2 extra bytes for read tags */ -- while (pos < (total + 2)) { -- /* Check that FIFO have data */ -- ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY, -- SET_BIT, 4 * ONE_BYTE); -- if (ret) { -- dev_err(qup->dev, "timeout for fifo not empty"); -- return ret; -- } -- val = readl(qup->base + QUP_IN_FIFO_BASE); -- -- for (idx = 0; idx < 4; idx++, val >>= 8, pos++) { -- /* first 2 bytes are tag bytes */ -- if (pos < 2) -- continue; -- -- if (pos >= (total + 2)) -- goto out; -- msg->buf[qup->pos + msg_offset] = val & 0xff; -- qup->pos++; -- } -- } -- --out: -- qup->blk.data_len -= total; -- -- return ret; --} -- --static int qup_i2c_read_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg) --{ -- int ret = 0; -- -- qup->msg = msg; -- qup->pos = 0; -- enable_irq(qup->irq); -- qup_i2c_set_blk_data(qup, msg); -- qup_i2c_set_read_mode_v2(qup, msg->len); -- -- ret = qup_i2c_change_state(qup, QUP_RUN_STATE); -- if (ret) -- goto err; -- -- writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); -- -- do { -- ret = qup_i2c_issue_xfer_v2(qup, msg); -- if (ret) -- goto err; -- -- ret = qup_i2c_wait_for_complete(qup, msg); -- if (ret) -- goto err; -- -- ret = qup_i2c_read_fifo_v2(qup, msg); -- if (ret) -- goto err; -- -- qup->blk.pos++; -- -- /* Handle SMBus block read length */ -- if (qup_i2c_check_msg_len(msg) && (msg->len == 1)) { -- if (msg->buf[0] > I2C_SMBUS_BLOCK_MAX) { -- ret = -EPROTO; -- goto err; -- } -- msg->len += msg->buf[0]; -- qup->pos = 0; -- qup_i2c_set_blk_data(qup, msg); -- /* set tag length for block read */ -- qup->blk.tx_tag_len = 2; -- qup_i2c_set_read_mode_v2(qup, msg->buf[0]); -- } -- } while (qup->blk.pos < qup->blk.count); -- --err: -- disable_irq(qup->irq); -- qup->msg = NULL; -- -- return ret; --} -- - static void qup_i2c_write_rx_tags_v1(struct qup_i2c_dev *qup) - { - struct i2c_msg *msg = qup->msg; -@@ -1404,13 +1118,434 @@ out: - return ret; - } - -+/* -+ * Configure registers related with reconfiguration during run and call it -+ * before each i2c sub transfer. -+ */ -+static void qup_i2c_conf_count_v2(struct qup_i2c_dev *qup) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ u32 qup_config = I2C_MINI_CORE | I2C_N_VAL_V2; -+ -+ if (blk->is_tx_blk_mode) -+ writel(qup->config_run | blk->total_tx_len, -+ qup->base + QUP_MX_OUTPUT_CNT); -+ else -+ writel(qup->config_run | blk->total_tx_len, -+ qup->base + QUP_MX_WRITE_CNT); -+ -+ if (blk->total_rx_len) { -+ if (blk->is_rx_blk_mode) -+ writel(qup->config_run | blk->total_rx_len, -+ qup->base + QUP_MX_INPUT_CNT); -+ else -+ writel(qup->config_run | blk->total_rx_len, -+ qup->base + QUP_MX_READ_CNT); -+ } else { -+ qup_config |= QUP_NO_INPUT; -+ } -+ -+ writel(qup_config, qup->base + QUP_CONFIG); -+} -+ -+/* -+ * Configure registers related with transfer mode (FIFO/Block) -+ * before starting of i2c transfer. It will be called only once in -+ * QUP RESET state. -+ */ -+static void qup_i2c_conf_mode_v2(struct qup_i2c_dev *qup) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ u32 io_mode = QUP_REPACK_EN; -+ -+ if (blk->is_tx_blk_mode) { -+ io_mode |= QUP_OUTPUT_BLK_MODE; -+ writel(0, qup->base + QUP_MX_WRITE_CNT); -+ } else { -+ writel(0, qup->base + QUP_MX_OUTPUT_CNT); -+ } -+ -+ if (blk->is_rx_blk_mode) { -+ io_mode |= QUP_INPUT_BLK_MODE; -+ writel(0, qup->base + QUP_MX_READ_CNT); -+ } else { -+ writel(0, qup->base + QUP_MX_INPUT_CNT); -+ } -+ -+ writel(io_mode, qup->base + QUP_IO_MODE); -+} -+ -+/* Clear required variables before starting of any QUP v2 sub transfer. */ -+static void qup_i2c_clear_blk_v2(struct qup_i2c_block *blk) -+{ -+ blk->send_last_word = false; -+ blk->tx_tags_sent = false; -+ blk->tx_fifo_data = 0; -+ blk->tx_fifo_data_pos = 0; -+ blk->tx_fifo_free = 0; -+ -+ blk->rx_tags_fetched = false; -+ blk->rx_bytes_read = false; -+ blk->rx_fifo_data = 0; -+ blk->rx_fifo_data_pos = 0; -+ blk->fifo_available = 0; -+} -+ -+/* Receive data from RX FIFO for read message in QUP v2 i2c transfer. */ -+static void qup_i2c_recv_data(struct qup_i2c_dev *qup) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ int j; -+ -+ for (j = blk->rx_fifo_data_pos; -+ blk->cur_blk_len && blk->fifo_available; -+ blk->cur_blk_len--, blk->fifo_available--) { -+ if (j == 0) -+ blk->rx_fifo_data = readl(qup->base + QUP_IN_FIFO_BASE); -+ -+ *(blk->cur_data++) = blk->rx_fifo_data; -+ blk->rx_fifo_data >>= 8; -+ -+ if (j == 3) -+ j = 0; -+ else -+ j++; -+ } -+ -+ blk->rx_fifo_data_pos = j; -+} -+ -+/* Receive tags for read message in QUP v2 i2c transfer. */ -+static void qup_i2c_recv_tags(struct qup_i2c_dev *qup) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ -+ blk->rx_fifo_data = readl(qup->base + QUP_IN_FIFO_BASE); -+ blk->rx_fifo_data >>= blk->rx_tag_len * 8; -+ blk->rx_fifo_data_pos = blk->rx_tag_len; -+ blk->fifo_available -= blk->rx_tag_len; -+} -+ -+/* -+ * Read the data and tags from RX FIFO. Since in read case, the tags will be -+ * preceded by received data bytes so -+ * 1. Check if rx_tags_fetched is false i.e. the start of QUP block so receive -+ * all tag bytes and discard that. -+ * 2. Read the data from RX FIFO. When all the data bytes have been read then -+ * set rx_bytes_read to true. -+ */ -+static void qup_i2c_read_rx_fifo_v2(struct qup_i2c_dev *qup) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ -+ if (!blk->rx_tags_fetched) { -+ qup_i2c_recv_tags(qup); -+ blk->rx_tags_fetched = true; -+ } -+ -+ qup_i2c_recv_data(qup); -+ if (!blk->cur_blk_len) -+ blk->rx_bytes_read = true; -+} -+ -+/* -+ * Write bytes in TX FIFO for write message in QUP v2 i2c transfer. QUP TX FIFO -+ * write works on word basis (4 bytes). Append new data byte write for TX FIFO -+ * in tx_fifo_data and write to TX FIFO when all the 4 bytes are present. -+ */ -+static void -+qup_i2c_write_blk_data(struct qup_i2c_dev *qup, u8 **data, unsigned int *len) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ unsigned int j; -+ -+ for (j = blk->tx_fifo_data_pos; *len && blk->tx_fifo_free; -+ (*len)--, blk->tx_fifo_free--) { -+ blk->tx_fifo_data |= *(*data)++ << (j * 8); -+ if (j == 3) { -+ writel(blk->tx_fifo_data, -+ qup->base + QUP_OUT_FIFO_BASE); -+ blk->tx_fifo_data = 0x0; -+ j = 0; -+ } else { -+ j++; -+ } -+ } -+ -+ blk->tx_fifo_data_pos = j; -+} -+ -+/* Transfer tags for read message in QUP v2 i2c transfer. */ -+static void qup_i2c_write_rx_tags_v2(struct qup_i2c_dev *qup) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ -+ qup_i2c_write_blk_data(qup, &blk->cur_tx_tags, &blk->tx_tag_len); -+ if (blk->tx_fifo_data_pos) -+ writel(blk->tx_fifo_data, qup->base + QUP_OUT_FIFO_BASE); -+} -+ -+/* -+ * Write the data and tags in TX FIFO. Since in write case, both tags and data -+ * need to be written and QUP write tags can have maximum 256 data length, so -+ * -+ * 1. Check if tx_tags_sent is false i.e. the start of QUP block so write the -+ * tags to TX FIFO and set tx_tags_sent to true. -+ * 2. Check if send_last_word is true. It will be set when last few data bytes -+ * (less than 4 bytes) are reamining to be written in FIFO because of no FIFO -+ * space. All this data bytes are available in tx_fifo_data so write this -+ * in FIFO. -+ * 3. Write the data to TX FIFO and check for cur_blk_len. If it is non zero -+ * then more data is pending otherwise following 3 cases can be possible -+ * a. if tx_fifo_data_pos is zero i.e. all the data bytes in this block -+ * have been written in TX FIFO so nothing else is required. -+ * b. tx_fifo_free is non zero i.e tx FIFO is free so copy the remaining data -+ * from tx_fifo_data to tx FIFO. Since, qup_i2c_write_blk_data do write -+ * in 4 bytes and FIFO space is in multiple of 4 bytes so tx_fifo_free -+ * will be always greater than or equal to 4 bytes. -+ * c. tx_fifo_free is zero. In this case, last few bytes (less than 4 -+ * bytes) are copied to tx_fifo_data but couldn't be sent because of -+ * FIFO full so make send_last_word true. -+ */ -+static void qup_i2c_write_tx_fifo_v2(struct qup_i2c_dev *qup) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ -+ if (!blk->tx_tags_sent) { -+ qup_i2c_write_blk_data(qup, &blk->cur_tx_tags, -+ &blk->tx_tag_len); -+ blk->tx_tags_sent = true; -+ } -+ -+ if (blk->send_last_word) -+ goto send_last_word; -+ -+ qup_i2c_write_blk_data(qup, &blk->cur_data, &blk->cur_blk_len); -+ if (!blk->cur_blk_len) { -+ if (!blk->tx_fifo_data_pos) -+ return; -+ -+ if (blk->tx_fifo_free) -+ goto send_last_word; -+ -+ blk->send_last_word = true; -+ } -+ -+ return; -+ -+send_last_word: -+ writel(blk->tx_fifo_data, qup->base + QUP_OUT_FIFO_BASE); -+} -+ -+/* -+ * Main transfer function which read or write i2c data. -+ * The QUP v2 supports reconfiguration during run in which multiple i2c sub -+ * transfers can be scheduled. -+ */ -+static int -+qup_i2c_conf_xfer_v2(struct qup_i2c_dev *qup, bool is_rx, bool is_first, -+ bool change_pause_state) -+{ -+ struct qup_i2c_block *blk = &qup->blk; -+ struct i2c_msg *msg = qup->msg; -+ int ret; -+ -+ /* -+ * Check if its SMBus Block read for which the top level read will be -+ * done into 2 QUP reads. One with message length 1 while other one is -+ * with actual length. -+ */ -+ if (qup_i2c_check_msg_len(msg)) { -+ if (qup->is_smbus_read) { -+ /* -+ * If the message length is already read in -+ * the first byte of the buffer, account for -+ * that by setting the offset -+ */ -+ blk->cur_data += 1; -+ is_first = false; -+ } else { -+ change_pause_state = false; -+ } -+ } -+ -+ qup->config_run = is_first ? 0 : QUP_I2C_MX_CONFIG_DURING_RUN; -+ -+ qup_i2c_clear_blk_v2(blk); -+ qup_i2c_conf_count_v2(qup); -+ -+ /* If it is first sub transfer, then configure i2c bus clocks */ -+ if (is_first) { -+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE); -+ if (ret) -+ return ret; -+ -+ writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); -+ -+ ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); -+ if (ret) -+ return ret; -+ } -+ -+ reinit_completion(&qup->xfer); -+ enable_irq(qup->irq); -+ /* -+ * In FIFO mode, tx FIFO can be written directly while in block mode the -+ * it will be written after getting OUT_BLOCK_WRITE_REQ interrupt -+ */ -+ if (!blk->is_tx_blk_mode) { -+ blk->tx_fifo_free = qup->out_fifo_sz; -+ -+ if (is_rx) -+ qup_i2c_write_rx_tags_v2(qup); -+ else -+ qup_i2c_write_tx_fifo_v2(qup); -+ } -+ -+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE); -+ if (ret) -+ goto err; -+ -+ ret = qup_i2c_wait_for_complete(qup, msg); -+ if (ret) -+ goto err; -+ -+ /* Move to pause state for all the transfers, except last one */ -+ if (change_pause_state) { -+ ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); -+ if (ret) -+ goto err; -+ } -+ -+err: -+ disable_irq(qup->irq); -+ return ret; -+} -+ -+/* -+ * Transfer one read/write message in i2c transfer. It splits the message into -+ * multiple of blk_xfer_limit data length blocks and schedule each -+ * QUP block individually. -+ */ -+static int qup_i2c_xfer_v2_msg(struct qup_i2c_dev *qup, int msg_id, bool is_rx) -+{ -+ int ret = 0; -+ unsigned int data_len, i; -+ struct i2c_msg *msg = qup->msg; -+ struct qup_i2c_block *blk = &qup->blk; -+ u8 *msg_buf = msg->buf; -+ -+ qup->blk_xfer_limit = is_rx ? RECV_MAX_DATA_LEN : QUP_READ_LIMIT; -+ qup_i2c_set_blk_data(qup, msg); -+ -+ for (i = 0; i < blk->count; i++) { -+ data_len = qup_i2c_get_data_len(qup); -+ blk->pos = i; -+ blk->cur_tx_tags = blk->tags; -+ blk->cur_blk_len = data_len; -+ blk->tx_tag_len = -+ qup_i2c_set_tags(blk->cur_tx_tags, qup, qup->msg); -+ -+ blk->cur_data = msg_buf; -+ -+ if (is_rx) { -+ blk->total_tx_len = blk->tx_tag_len; -+ blk->rx_tag_len = 2; -+ blk->total_rx_len = blk->rx_tag_len + data_len; -+ } else { -+ blk->total_tx_len = blk->tx_tag_len + data_len; -+ blk->total_rx_len = 0; -+ } -+ -+ ret = qup_i2c_conf_xfer_v2(qup, is_rx, !msg_id && !i, -+ !qup->is_last || i < blk->count - 1); -+ if (ret) -+ return ret; -+ -+ /* Handle SMBus block read length */ -+ if (qup_i2c_check_msg_len(msg) && msg->len == 1 && -+ !qup->is_smbus_read) { -+ if (msg->buf[0] > I2C_SMBUS_BLOCK_MAX) -+ return -EPROTO; -+ -+ msg->len = msg->buf[0]; -+ qup->is_smbus_read = true; -+ ret = qup_i2c_xfer_v2_msg(qup, msg_id, true); -+ qup->is_smbus_read = false; -+ if (ret) -+ return ret; -+ -+ msg->len += 1; -+ } -+ -+ msg_buf += data_len; -+ blk->data_len -= qup->blk_xfer_limit; -+ } -+ -+ return ret; -+} -+ -+/* -+ * QUP v2 supports 3 modes -+ * Programmed IO using FIFO mode : Less than FIFO size -+ * Programmed IO using Block mode : Greater than FIFO size -+ * DMA using BAM : Appropriate for any transaction size but the address should -+ * be DMA applicable -+ * -+ * This function determines the mode which will be used for this transfer. An -+ * i2c transfer contains multiple message. Following are the rules to determine -+ * the mode used. -+ * 1. Determine complete length, maximum tx and rx length for complete transfer. -+ * 2. If complete transfer length is greater than fifo size then use the DMA -+ * mode. -+ * 3. In FIFO or block mode, tx and rx can operate in different mode so check -+ * for maximum tx and rx length to determine mode. -+ */ -+static int -+qup_i2c_determine_mode_v2(struct qup_i2c_dev *qup, -+ struct i2c_msg msgs[], int num) -+{ -+ int idx; -+ bool no_dma = false; -+ unsigned int max_tx_len = 0, max_rx_len = 0, total_len = 0; -+ -+ /* All i2c_msgs should be transferred using either dma or cpu */ -+ for (idx = 0; idx < num; idx++) { -+ if (msgs[idx].len == 0) -+ return -EINVAL; -+ -+ if (msgs[idx].flags & I2C_M_RD) -+ max_rx_len = max_t(unsigned int, max_rx_len, -+ msgs[idx].len); -+ else -+ max_tx_len = max_t(unsigned int, max_tx_len, -+ msgs[idx].len); -+ -+ if (is_vmalloc_addr(msgs[idx].buf)) -+ no_dma = true; -+ -+ total_len += msgs[idx].len; -+ } -+ -+ if (!no_dma && qup->is_dma && -+ (total_len > qup->out_fifo_sz || total_len > qup->in_fifo_sz)) { -+ qup->use_dma = true; -+ } else { -+ qup->blk.is_tx_blk_mode = max_tx_len > qup->out_fifo_sz - -+ QUP_MAX_TAGS_LEN ? true : false; -+ qup->blk.is_rx_blk_mode = max_rx_len > qup->in_fifo_sz - -+ READ_RX_TAGS_LEN ? true : false; -+ } -+ -+ return 0; -+} -+ - static int qup_i2c_xfer_v2(struct i2c_adapter *adap, - struct i2c_msg msgs[], - int num) - { - struct qup_i2c_dev *qup = i2c_get_adapdata(adap); - int ret, idx = 0; -- unsigned int total_len = 0; - - qup->bus_err = 0; - qup->qup_err = 0; -@@ -1419,6 +1554,10 @@ static int qup_i2c_xfer_v2(struct i2c_ad - if (ret < 0) - goto out; - -+ ret = qup_i2c_determine_mode_v2(qup, msgs, num); -+ if (ret) -+ goto out; -+ - writel(1, qup->base + QUP_SW_RESET); - ret = qup_i2c_poll_state(qup, QUP_RESET_STATE); - if (ret) -@@ -1428,60 +1567,35 @@ static int qup_i2c_xfer_v2(struct i2c_ad - writel(I2C_MINI_CORE | I2C_N_VAL_V2, qup->base + QUP_CONFIG); - writel(QUP_V2_TAGS_EN, qup->base + QUP_I2C_MASTER_GEN); - -- if ((qup->is_dma)) { -- /* All i2c_msgs should be transferred using either dma or cpu */ -- for (idx = 0; idx < num; idx++) { -- if (msgs[idx].len == 0) { -- ret = -EINVAL; -- goto out; -- } -- -- if (is_vmalloc_addr(msgs[idx].buf)) -- break; -- -- total_len += msgs[idx].len; -- } -- -- if (idx == num && (total_len > qup->out_fifo_sz || -- total_len > qup->in_fifo_sz)) -- qup->use_dma = true; -+ if (qup_i2c_poll_state_i2c_master(qup)) { -+ ret = -EIO; -+ goto out; - } - -- idx = 0; -+ if (qup->use_dma) { -+ reinit_completion(&qup->xfer); -+ ret = qup_i2c_bam_xfer(adap, &msgs[0], num); -+ qup->use_dma = false; -+ } else { -+ qup_i2c_conf_mode_v2(qup); - -- do { -- if (msgs[idx].len == 0) { -- ret = -EINVAL; -- goto out; -- } -+ for (idx = 0; idx < num; idx++) { -+ qup->msg = &msgs[idx]; -+ qup->is_last = idx == (num - 1); - -- if (qup_i2c_poll_state_i2c_master(qup)) { -- ret = -EIO; -- goto out; -+ ret = qup_i2c_xfer_v2_msg(qup, idx, -+ !!(msgs[idx].flags & I2C_M_RD)); -+ if (ret) -+ break; - } -+ qup->msg = NULL; -+ } - -- qup->is_last = (idx == (num - 1)); -- if (idx) -- qup->config_run = QUP_I2C_MX_CONFIG_DURING_RUN; -- else -- qup->config_run = 0; -- -- reinit_completion(&qup->xfer); -- -- if (qup->use_dma) { -- ret = qup_i2c_bam_xfer(adap, &msgs[idx], num); -- qup->use_dma = false; -- break; -- } else { -- if (msgs[idx].flags & I2C_M_RD) -- ret = qup_i2c_read_one_v2(qup, &msgs[idx]); -- else -- ret = qup_i2c_write_one_v2(qup, &msgs[idx]); -- } -- } while ((idx++ < (num - 1)) && !ret); -+ if (!ret) -+ ret = qup_i2c_bus_active(qup, ONE_BYTE); - - if (!ret) -- ret = qup_i2c_change_state(qup, QUP_RESET_STATE); -+ qup_i2c_change_state(qup, QUP_RESET_STATE); - - if (ret == 0) - ret = num; -@@ -1545,6 +1659,7 @@ static int qup_i2c_probe(struct platform - u32 src_clk_freq = DEFAULT_SRC_CLK; - u32 clk_freq = DEFAULT_CLK_FREQ; - int blocks; -+ bool is_qup_v1; - - qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL); - if (!qup) -@@ -1563,12 +1678,10 @@ static int qup_i2c_probe(struct platform - if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) { - qup->adap.algo = &qup_i2c_algo; - qup->adap.quirks = &qup_i2c_quirks; -- qup->is_qup_v1 = true; -- qup->write_tx_fifo = qup_i2c_write_tx_fifo_v1; -- qup->read_rx_fifo = qup_i2c_read_rx_fifo_v1; -- qup->write_rx_tags = qup_i2c_write_rx_tags_v1; -+ is_qup_v1 = true; - } else { - qup->adap.algo = &qup_i2c_algo_v2; -+ is_qup_v1 = false; - ret = qup_i2c_req_dma(qup); - - if (ret == -EPROBE_DEFER) -@@ -1694,14 +1807,31 @@ nodma: - ret = -EIO; - goto fail; - } -- qup->out_blk_sz = blk_sizes[size] / 2; -+ qup->out_blk_sz = blk_sizes[size]; - - size = QUP_INPUT_BLOCK_SIZE(io_mode); - if (size >= ARRAY_SIZE(blk_sizes)) { - ret = -EIO; - goto fail; - } -- qup->in_blk_sz = blk_sizes[size] / 2; -+ qup->in_blk_sz = blk_sizes[size]; -+ -+ if (is_qup_v1) { -+ /* -+ * in QUP v1, QUP_CONFIG uses N as 15 i.e 16 bits constitutes a -+ * single transfer but the block size is in bytes so divide the -+ * in_blk_sz and out_blk_sz by 2 -+ */ -+ qup->in_blk_sz /= 2; -+ qup->out_blk_sz /= 2; -+ qup->write_tx_fifo = qup_i2c_write_tx_fifo_v1; -+ qup->read_rx_fifo = qup_i2c_read_rx_fifo_v1; -+ qup->write_rx_tags = qup_i2c_write_rx_tags_v1; -+ } else { -+ qup->write_tx_fifo = qup_i2c_write_tx_fifo_v2; -+ qup->read_rx_fifo = qup_i2c_read_rx_fifo_v2; -+ qup->write_rx_tags = qup_i2c_write_rx_tags_v2; -+ } - - size = QUP_OUTPUT_FIFO_SIZE(io_mode); - qup->out_fifo_sz = qup->out_blk_sz * (2 << size); diff --git a/target/linux/ipq40xx/patches-4.14/090-ipq40xx-fix-high-resolution-timer.patch b/target/linux/ipq40xx/patches-4.14/090-ipq40xx-fix-high-resolution-timer.patch deleted file mode 100644 index 796844d67f..0000000000 --- a/target/linux/ipq40xx/patches-4.14/090-ipq40xx-fix-high-resolution-timer.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 09f145f417a5d64d6b8d4476699dfb0eccc6c784 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Tue, 7 May 2019 10:14:05 +0300 -Subject: [PATCH] ipq40xx: fix high resolution timer - -Cherry-picked from CAF QSDK repo. -Original commit message: -The kernel is failing in switching the timer for high resolution -mode and clock source operates in 10ms resolution. The always-on -property needs to be given for timer device tree node to make -clock source working in 1ns resolution. - -Change-Id: I7c00b3c74d97c2a30ac9f05e18b511a0550fd459 -Signed-off-by: Abhishek Sahu -Signed-off-by: Pavel Kubelun ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -167,6 +167,7 @@ - <1 4 0xf08>, - <1 1 0xf08>; - clock-frequency = <48000000>; -+ always-on; - }; - - soc { diff --git a/target/linux/ipq40xx/patches-4.14/181-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch b/target/linux/ipq40xx/patches-4.14/181-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch deleted file mode 100644 index 58b0ebf5e7..0000000000 --- a/target/linux/ipq40xx/patches-4.14/181-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Eneas U de Queiroz -Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag - -Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by -the qce driver, since they are all hardware accelerated, accessible -through a kernel driver only, and not available directly to userspace. - -Signed-off-by: Eneas U de Queiroz - ---- a/drivers/crypto/qce/ablkcipher.c -+++ b/drivers/crypto/qce/ablkcipher.c -@@ -373,7 +373,7 @@ static int qce_ablkcipher_register_one(c - - alg->cra_priority = 300; - alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK; -+ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; - alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); - alg->cra_alignmask = 0; - alg->cra_type = &crypto_ablkcipher_type; ---- a/drivers/crypto/qce/sha.c -+++ b/drivers/crypto/qce/sha.c -@@ -526,7 +526,7 @@ static int qce_ahash_register_one(const - base = &alg->halg.base; - base->cra_blocksize = def->blocksize; - base->cra_priority = 300; -- base->cra_flags = CRYPTO_ALG_ASYNC; -+ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY; - base->cra_ctxsize = sizeof(struct qce_sha_ctx); - base->cra_alignmask = 0; - base->cra_module = THIS_MODULE; diff --git a/target/linux/ipq40xx/patches-4.14/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch b/target/linux/ipq40xx/patches-4.14/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch deleted file mode 100644 index 3b219f46b2..0000000000 --- a/target/linux/ipq40xx/patches-4.14/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch +++ /dev/null @@ -1,62 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1037,6 +1037,7 @@ static const struct flash_info spi_nor_i - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, -+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, - { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, - { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, -@@ -1209,11 +1210,12 @@ static const struct flash_info spi_nor_i - { }, - }; - --static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) -+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor, -+ const char *name) - { - int tmp; - u8 id[SPI_NOR_MAX_ID_LEN]; -- const struct flash_info *info; -+ const struct flash_info *info, *first_match = NULL; - - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); - if (tmp < 0) { -@@ -1224,10 +1226,16 @@ static const struct flash_info *spi_nor_ - for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { - info = &spi_nor_ids[tmp]; - if (info->id_len) { -- if (!memcmp(info->id, id, info->id_len)) -- return &spi_nor_ids[tmp]; -+ if (!memcmp(info->id, id, info->id_len)) { -+ if (!name || !strcmp(name, info->name)) -+ return info; -+ if (!first_match) -+ first_match = info; -+ } - } - } -+ if (first_match) -+ return first_match; - dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n", - id[0], id[1], id[2]); - return ERR_PTR(-ENODEV); -@@ -2687,7 +2695,7 @@ int spi_nor_scan(struct spi_nor *nor, co - info = spi_nor_match_id(name); - /* Try to auto-detect if chip name wasn't specified or not found */ - if (!info) -- info = spi_nor_read_id(nor); -+ info = spi_nor_read_id(nor, NULL); - if (IS_ERR_OR_NULL(info)) - return -ENOENT; - -@@ -2698,7 +2706,7 @@ int spi_nor_scan(struct spi_nor *nor, co - if (name && info->id_len) { - const struct flash_info *jinfo; - -- jinfo = spi_nor_read_id(nor); -+ jinfo = spi_nor_read_id(nor, name); - if (IS_ERR(jinfo)) { - return PTR_ERR(jinfo); - } else if (jinfo != info) { diff --git a/target/linux/ipq40xx/patches-4.14/700-net-add-qualcomm-mdio-and-phy.patch b/target/linux/ipq40xx/patches-4.14/700-net-add-qualcomm-mdio-and-phy.patch deleted file mode 100644 index 33184ff527..0000000000 --- a/target/linux/ipq40xx/patches-4.14/700-net-add-qualcomm-mdio-and-phy.patch +++ /dev/null @@ -1,2685 +0,0 @@ -From 5a71a2005a2e1e6bbe36f00386c495ad6626beb2 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 19 Jan 2017 01:59:43 +0100 -Subject: [PATCH 30/38] NET: add qualcomm mdio and PHY - ---- - drivers/net/phy/Kconfig | 14 ++++++++++++++ - drivers/net/phy/Makefile | 2 ++ - 2 files changed, 16 insertions(+) - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -481,6 +481,20 @@ config XILINX_GMII2RGMII - the Reduced Gigabit Media Independent Interface(RGMII) between - Ethernet physical media devices and the Gigabit Ethernet controller. - -+config MDIO_IPQ40XX -+ tristate "Qualcomm Atheros ipq40xx MDIO interface" -+ depends on HAS_IOMEM && OF -+ ---help--- -+ This driver supports the MDIO interface found in Qualcomm -+ Atheros ipq40xx Soc chip. -+ -+config AR40XX_PHY -+ tristate "Driver for Qualcomm Atheros IPQ40XX switches" -+ depends on HAS_IOMEM && OF -+ select SWCONFIG -+ ---help--- -+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches. -+ - endif # PHYLIB - - config MICREL_KS8995MA ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -48,6 +48,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o - obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o - obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o -+obj-$(CONFIG_MDIO_IPQ40XX) += mdio-ipq40xx.o - obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o - obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o - obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o -@@ -60,6 +61,7 @@ obj-y += $(sfp-obj-y) $(sfp-obj-m) - - obj-$(CONFIG_AMD_PHY) += amd.o - obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o -+obj-$(CONFIG_AR40XX_PHY) += ar40xx.o - obj-$(CONFIG_AT803X_PHY) += at803x.o - obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o - obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o ---- /dev/null -+++ b/drivers/net/phy/ar40xx.c -@@ -0,0 +1,2090 @@ -+/* -+ * Copyright (c) 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "ar40xx.h" -+ -+static struct ar40xx_priv *ar40xx_priv; -+ -+#define MIB_DESC(_s , _o, _n) \ -+ { \ -+ .size = (_s), \ -+ .offset = (_o), \ -+ .name = (_n), \ -+ } -+ -+static const struct ar40xx_mib_desc ar40xx_mibs[] = { -+ MIB_DESC(1, AR40XX_STATS_RXBROAD, "RxBroad"), -+ MIB_DESC(1, AR40XX_STATS_RXPAUSE, "RxPause"), -+ MIB_DESC(1, AR40XX_STATS_RXMULTI, "RxMulti"), -+ MIB_DESC(1, AR40XX_STATS_RXFCSERR, "RxFcsErr"), -+ MIB_DESC(1, AR40XX_STATS_RXALIGNERR, "RxAlignErr"), -+ MIB_DESC(1, AR40XX_STATS_RXRUNT, "RxRunt"), -+ MIB_DESC(1, AR40XX_STATS_RXFRAGMENT, "RxFragment"), -+ MIB_DESC(1, AR40XX_STATS_RX64BYTE, "Rx64Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX128BYTE, "Rx128Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX256BYTE, "Rx256Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX512BYTE, "Rx512Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX1024BYTE, "Rx1024Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX1518BYTE, "Rx1518Byte"), -+ MIB_DESC(1, AR40XX_STATS_RXMAXBYTE, "RxMaxByte"), -+ MIB_DESC(1, AR40XX_STATS_RXTOOLONG, "RxTooLong"), -+ MIB_DESC(2, AR40XX_STATS_RXGOODBYTE, "RxGoodByte"), -+ MIB_DESC(2, AR40XX_STATS_RXBADBYTE, "RxBadByte"), -+ MIB_DESC(1, AR40XX_STATS_RXOVERFLOW, "RxOverFlow"), -+ MIB_DESC(1, AR40XX_STATS_FILTERED, "Filtered"), -+ MIB_DESC(1, AR40XX_STATS_TXBROAD, "TxBroad"), -+ MIB_DESC(1, AR40XX_STATS_TXPAUSE, "TxPause"), -+ MIB_DESC(1, AR40XX_STATS_TXMULTI, "TxMulti"), -+ MIB_DESC(1, AR40XX_STATS_TXUNDERRUN, "TxUnderRun"), -+ MIB_DESC(1, AR40XX_STATS_TX64BYTE, "Tx64Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX128BYTE, "Tx128Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX256BYTE, "Tx256Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX512BYTE, "Tx512Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX1024BYTE, "Tx1024Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX1518BYTE, "Tx1518Byte"), -+ MIB_DESC(1, AR40XX_STATS_TXMAXBYTE, "TxMaxByte"), -+ MIB_DESC(1, AR40XX_STATS_TXOVERSIZE, "TxOverSize"), -+ MIB_DESC(2, AR40XX_STATS_TXBYTE, "TxByte"), -+ MIB_DESC(1, AR40XX_STATS_TXCOLLISION, "TxCollision"), -+ MIB_DESC(1, AR40XX_STATS_TXABORTCOL, "TxAbortCol"), -+ MIB_DESC(1, AR40XX_STATS_TXMULTICOL, "TxMultiCol"), -+ MIB_DESC(1, AR40XX_STATS_TXSINGLECOL, "TxSingleCol"), -+ MIB_DESC(1, AR40XX_STATS_TXEXCDEFER, "TxExcDefer"), -+ MIB_DESC(1, AR40XX_STATS_TXDEFER, "TxDefer"), -+ MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"), -+}; -+ -+static u32 -+ar40xx_read(struct ar40xx_priv *priv, int reg) -+{ -+ return readl(priv->hw_addr + reg); -+} -+ -+static u32 -+ar40xx_psgmii_read(struct ar40xx_priv *priv, int reg) -+{ -+ return readl(priv->psgmii_hw_addr + reg); -+} -+ -+static void -+ar40xx_write(struct ar40xx_priv *priv, int reg, u32 val) -+{ -+ writel(val, priv->hw_addr + reg); -+} -+ -+static u32 -+ar40xx_rmw(struct ar40xx_priv *priv, int reg, u32 mask, u32 val) -+{ -+ u32 ret; -+ -+ ret = ar40xx_read(priv, reg); -+ ret &= ~mask; -+ ret |= val; -+ ar40xx_write(priv, reg, ret); -+ return ret; -+} -+ -+static void -+ar40xx_psgmii_write(struct ar40xx_priv *priv, int reg, u32 val) -+{ -+ writel(val, priv->psgmii_hw_addr + reg); -+} -+ -+static void -+ar40xx_phy_dbg_write(struct ar40xx_priv *priv, int phy_addr, -+ u16 dbg_addr, u16 dbg_data) -+{ -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr); -+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA, dbg_data); -+ mutex_unlock(&bus->mdio_lock); -+} -+ -+static void -+ar40xx_phy_dbg_read(struct ar40xx_priv *priv, int phy_addr, -+ u16 dbg_addr, u16 *dbg_data) -+{ -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr); -+ *dbg_data = bus->read(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA); -+ mutex_unlock(&bus->mdio_lock); -+} -+ -+static void -+ar40xx_phy_mmd_write(struct ar40xx_priv *priv, u32 phy_id, -+ u16 mmd_num, u16 reg_id, u16 reg_val) -+{ -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, mmd_num); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_DATA, reg_id); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, -+ 0x4000 | mmd_num); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_DATA, reg_val); -+ mutex_unlock(&bus->mdio_lock); -+} -+ -+static u16 -+ar40xx_phy_mmd_read(struct ar40xx_priv *priv, u32 phy_id, -+ u16 mmd_num, u16 reg_id) -+{ -+ u16 value; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, mmd_num); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_DATA, reg_id); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, -+ 0x4000 | mmd_num); -+ value = bus->read(bus, phy_id, AR40XX_MII_ATH_MMD_DATA); -+ mutex_unlock(&bus->mdio_lock); -+ return value; -+} -+ -+/* Start of swconfig support */ -+ -+static void -+ar40xx_phy_poll_reset(struct ar40xx_priv *priv) -+{ -+ u32 i, in_reset, retries = 500; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ /* Assume RESET was recently issued to some or all of the phys */ -+ in_reset = GENMASK(AR40XX_NUM_PHYS - 1, 0); -+ -+ while (retries--) { -+ /* 1ms should be plenty of time. -+ * 802.3 spec allows for a max wait time of 500ms -+ */ -+ usleep_range(1000, 2000); -+ -+ for (i = 0; i < AR40XX_NUM_PHYS; i++) { -+ int val; -+ -+ /* skip devices which have completed reset */ -+ if (!(in_reset & BIT(i))) -+ continue; -+ -+ val = mdiobus_read(bus, i, MII_BMCR); -+ if (val < 0) -+ continue; -+ -+ /* mark when phy is no longer in reset state */ -+ if (!(val & BMCR_RESET)) -+ in_reset &= ~BIT(i); -+ } -+ -+ if (!in_reset) -+ return; -+ } -+ -+ dev_warn(&bus->dev, "Failed to reset all phys! (in_reset: 0x%x)\n", -+ in_reset); -+} -+ -+static void -+ar40xx_phy_init(struct ar40xx_priv *priv) -+{ -+ int i; -+ struct mii_bus *bus; -+ u16 val; -+ -+ bus = priv->mii_bus; -+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { -+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val); -+ val &= ~AR40XX_PHY_MANU_CTRL_EN; -+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val); -+ mdiobus_write(bus, i, -+ MII_ADVERTISE, ADVERTISE_ALL | -+ ADVERTISE_PAUSE_CAP | -+ ADVERTISE_PAUSE_ASYM); -+ mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL); -+ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); -+ } -+ -+ ar40xx_phy_poll_reset(priv); -+} -+ -+static void -+ar40xx_port_phy_linkdown(struct ar40xx_priv *priv) -+{ -+ struct mii_bus *bus; -+ int i; -+ u16 val; -+ -+ bus = priv->mii_bus; -+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { -+ mdiobus_write(bus, i, MII_CTRL1000, 0); -+ mdiobus_write(bus, i, MII_ADVERTISE, 0); -+ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); -+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val); -+ val |= AR40XX_PHY_MANU_CTRL_EN; -+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val); -+ /* disable transmit */ -+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_2, &val); -+ val &= 0xf00f; -+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_2, val); -+ } -+} -+ -+static void -+ar40xx_set_mirror_regs(struct ar40xx_priv *priv) -+{ -+ int port; -+ -+ /* reset all mirror registers */ -+ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0, -+ AR40XX_FWD_CTRL0_MIRROR_PORT, -+ (0xF << AR40XX_FWD_CTRL0_MIRROR_PORT_S)); -+ for (port = 0; port < AR40XX_NUM_PORTS; port++) { -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(port), -+ AR40XX_PORT_LOOKUP_ING_MIRROR_EN, 0); -+ -+ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(port), -+ AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN, 0); -+ } -+ -+ /* now enable mirroring if necessary */ -+ if (priv->source_port >= AR40XX_NUM_PORTS || -+ priv->monitor_port >= AR40XX_NUM_PORTS || -+ priv->source_port == priv->monitor_port) { -+ return; -+ } -+ -+ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0, -+ AR40XX_FWD_CTRL0_MIRROR_PORT, -+ (priv->monitor_port << AR40XX_FWD_CTRL0_MIRROR_PORT_S)); -+ -+ if (priv->mirror_rx) -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(priv->source_port), 0, -+ AR40XX_PORT_LOOKUP_ING_MIRROR_EN); -+ -+ if (priv->mirror_tx) -+ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(priv->source_port), -+ 0, AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN); -+} -+ -+static int -+ar40xx_sw_get_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u8 ports = priv->vlan_table[val->port_vlan]; -+ int i; -+ -+ val->len = 0; -+ for (i = 0; i < dev->ports; i++) { -+ struct switch_port *p; -+ -+ if (!(ports & BIT(i))) -+ continue; -+ -+ p = &val->value.ports[val->len++]; -+ p->id = i; -+ if ((priv->vlan_tagged & BIT(i)) || -+ (priv->pvid[i] != val->port_vlan)) -+ p->flags = BIT(SWITCH_PORT_FLAG_TAGGED); -+ else -+ p->flags = 0; -+ } -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u8 *vt = &priv->vlan_table[val->port_vlan]; -+ int i; -+ -+ *vt = 0; -+ for (i = 0; i < val->len; i++) { -+ struct switch_port *p = &val->value.ports[i]; -+ -+ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) { -+ if (val->port_vlan == priv->pvid[p->id]) -+ priv->vlan_tagged |= BIT(p->id); -+ } else { -+ priv->vlan_tagged &= ~BIT(p->id); -+ priv->pvid[p->id] = val->port_vlan; -+ } -+ -+ *vt |= BIT(p->id); -+ } -+ return 0; -+} -+ -+static int -+ar40xx_reg_wait(struct ar40xx_priv *priv, u32 reg, u32 mask, u32 val, -+ unsigned timeout) -+{ -+ int i; -+ -+ for (i = 0; i < timeout; i++) { -+ u32 t; -+ -+ t = ar40xx_read(priv, reg); -+ if ((t & mask) == val) -+ return 0; -+ -+ usleep_range(1000, 2000); -+ } -+ -+ return -ETIMEDOUT; -+} -+ -+static int -+ar40xx_mib_op(struct ar40xx_priv *priv, u32 op) -+{ -+ int ret; -+ -+ lockdep_assert_held(&priv->mib_lock); -+ -+ /* Capture the hardware statistics for all ports */ -+ ar40xx_rmw(priv, AR40XX_REG_MIB_FUNC, -+ AR40XX_MIB_FUNC, (op << AR40XX_MIB_FUNC_S)); -+ -+ /* Wait for the capturing to complete. */ -+ ret = ar40xx_reg_wait(priv, AR40XX_REG_MIB_FUNC, -+ AR40XX_MIB_BUSY, 0, 10); -+ -+ return ret; -+} -+ -+static void -+ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush) -+{ -+ unsigned int base; -+ u64 *mib_stats; -+ int i; -+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ -+ WARN_ON(port >= priv->dev.ports); -+ -+ lockdep_assert_held(&priv->mib_lock); -+ -+ base = AR40XX_REG_PORT_STATS_START + -+ AR40XX_REG_PORT_STATS_LEN * port; -+ -+ mib_stats = &priv->mib_stats[port * num_mibs]; -+ if (flush) { -+ u32 len; -+ -+ len = num_mibs * sizeof(*mib_stats); -+ memset(mib_stats, 0, len); -+ return; -+ } -+ for (i = 0; i < num_mibs; i++) { -+ const struct ar40xx_mib_desc *mib; -+ u64 t; -+ -+ mib = &ar40xx_mibs[i]; -+ t = ar40xx_read(priv, base + mib->offset); -+ if (mib->size == 2) { -+ u64 hi; -+ -+ hi = ar40xx_read(priv, base + mib->offset + 4); -+ t |= hi << 32; -+ } -+ -+ mib_stats[i] += t; -+ } -+} -+ -+static int -+ar40xx_mib_capture(struct ar40xx_priv *priv) -+{ -+ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_CAPTURE); -+} -+ -+static int -+ar40xx_mib_flush(struct ar40xx_priv *priv) -+{ -+ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_FLUSH); -+} -+ -+static int -+ar40xx_sw_set_reset_mibs(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ unsigned int len; -+ int ret; -+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ -+ mutex_lock(&priv->mib_lock); -+ -+ len = priv->dev.ports * num_mibs * sizeof(*priv->mib_stats); -+ memset(priv->mib_stats, 0, len); -+ ret = ar40xx_mib_flush(priv); -+ -+ mutex_unlock(&priv->mib_lock); -+ return ret; -+} -+ -+static int -+ar40xx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ priv->vlan = !!val->value.i; -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ val->value.i = priv->vlan; -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_rx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->mirror_rx = !!val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_rx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->mirror_rx; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_tx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->mirror_tx = !!val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_tx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->mirror_tx; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_monitor_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->monitor_port = val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_monitor_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->monitor_port; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_source_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->source_port = val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_source_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->source_port; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_linkdown(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ if (val->value.i == 1) -+ ar40xx_port_phy_linkdown(priv); -+ else -+ ar40xx_phy_init(priv); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_port_reset_mib(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ int port; -+ int ret; -+ -+ port = val->port_vlan; -+ if (port >= dev->ports) -+ return -EINVAL; -+ -+ mutex_lock(&priv->mib_lock); -+ ret = ar40xx_mib_capture(priv); -+ if (ret) -+ goto unlock; -+ -+ ar40xx_mib_fetch_port_stat(priv, port, true); -+ -+unlock: -+ mutex_unlock(&priv->mib_lock); -+ return ret; -+} -+ -+static int -+ar40xx_sw_get_port_mib(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u64 *mib_stats; -+ int port; -+ int ret; -+ char *buf = priv->buf; -+ int i, len = 0; -+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ -+ port = val->port_vlan; -+ if (port >= dev->ports) -+ return -EINVAL; -+ -+ mutex_lock(&priv->mib_lock); -+ ret = ar40xx_mib_capture(priv); -+ if (ret) -+ goto unlock; -+ -+ ar40xx_mib_fetch_port_stat(priv, port, false); -+ -+ len += snprintf(buf + len, sizeof(priv->buf) - len, -+ "Port %d MIB counters\n", -+ port); -+ -+ mib_stats = &priv->mib_stats[port * num_mibs]; -+ for (i = 0; i < num_mibs; i++) -+ len += snprintf(buf + len, sizeof(priv->buf) - len, -+ "%-12s: %llu\n", -+ ar40xx_mibs[i].name, -+ mib_stats[i]); -+ -+ val->value.s = buf; -+ val->len = len; -+ -+unlock: -+ mutex_unlock(&priv->mib_lock); -+ return ret; -+} -+ -+static int -+ar40xx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ priv->vlan_id[val->port_vlan] = val->value.i; -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ val->value.i = priv->vlan_id[val->port_vlan]; -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ *vlan = priv->pvid[port]; -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_pvid(struct switch_dev *dev, int port, int vlan) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ /* make sure no invalid PVIDs get set */ -+ if (vlan >= dev->vlans) -+ return -EINVAL; -+ -+ priv->pvid[port] = vlan; -+ return 0; -+} -+ -+static void -+ar40xx_read_port_link(struct ar40xx_priv *priv, int port, -+ struct switch_port_link *link) -+{ -+ u32 status; -+ u32 speed; -+ -+ memset(link, 0, sizeof(*link)); -+ -+ status = ar40xx_read(priv, AR40XX_REG_PORT_STATUS(port)); -+ -+ link->aneg = !!(status & AR40XX_PORT_AUTO_LINK_EN); -+ if (link->aneg || (port != AR40XX_PORT_CPU)) -+ link->link = !!(status & AR40XX_PORT_STATUS_LINK_UP); -+ else -+ link->link = true; -+ -+ if (!link->link) -+ return; -+ -+ link->duplex = !!(status & AR40XX_PORT_DUPLEX); -+ link->tx_flow = !!(status & AR40XX_PORT_STATUS_TXFLOW); -+ link->rx_flow = !!(status & AR40XX_PORT_STATUS_RXFLOW); -+ -+ speed = (status & AR40XX_PORT_SPEED) >> -+ AR40XX_PORT_STATUS_SPEED_S; -+ -+ switch (speed) { -+ case AR40XX_PORT_SPEED_10M: -+ link->speed = SWITCH_PORT_SPEED_10; -+ break; -+ case AR40XX_PORT_SPEED_100M: -+ link->speed = SWITCH_PORT_SPEED_100; -+ break; -+ case AR40XX_PORT_SPEED_1000M: -+ link->speed = SWITCH_PORT_SPEED_1000; -+ break; -+ default: -+ link->speed = SWITCH_PORT_SPEED_UNKNOWN; -+ break; -+ } -+} -+ -+static int -+ar40xx_sw_get_port_link(struct switch_dev *dev, int port, -+ struct switch_port_link *link) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ ar40xx_read_port_link(priv, port, link); -+ return 0; -+} -+ -+static const struct switch_attr ar40xx_sw_attr_globals[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_vlan", -+ .description = "Enable VLAN mode", -+ .set = ar40xx_sw_set_vlan, -+ .get = ar40xx_sw_get_vlan, -+ .max = 1 -+ }, -+ { -+ .type = SWITCH_TYPE_NOVAL, -+ .name = "reset_mibs", -+ .description = "Reset all MIB counters", -+ .set = ar40xx_sw_set_reset_mibs, -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_mirror_rx", -+ .description = "Enable mirroring of RX packets", -+ .set = ar40xx_sw_set_mirror_rx_enable, -+ .get = ar40xx_sw_get_mirror_rx_enable, -+ .max = 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_mirror_tx", -+ .description = "Enable mirroring of TX packets", -+ .set = ar40xx_sw_set_mirror_tx_enable, -+ .get = ar40xx_sw_get_mirror_tx_enable, -+ .max = 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "mirror_monitor_port", -+ .description = "Mirror monitor port", -+ .set = ar40xx_sw_set_mirror_monitor_port, -+ .get = ar40xx_sw_get_mirror_monitor_port, -+ .max = AR40XX_NUM_PORTS - 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "mirror_source_port", -+ .description = "Mirror source port", -+ .set = ar40xx_sw_set_mirror_source_port, -+ .get = ar40xx_sw_get_mirror_source_port, -+ .max = AR40XX_NUM_PORTS - 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "linkdown", -+ .description = "Link down all the PHYs", -+ .set = ar40xx_sw_set_linkdown, -+ .max = 1 -+ }, -+}; -+ -+static const struct switch_attr ar40xx_sw_attr_port[] = { -+ { -+ .type = SWITCH_TYPE_NOVAL, -+ .name = "reset_mib", -+ .description = "Reset single port MIB counters", -+ .set = ar40xx_sw_set_port_reset_mib, -+ }, -+ { -+ .type = SWITCH_TYPE_STRING, -+ .name = "mib", -+ .description = "Get port's MIB counters", -+ .set = NULL, -+ .get = ar40xx_sw_get_port_mib, -+ }, -+}; -+ -+const struct switch_attr ar40xx_sw_attr_vlan[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "vid", -+ .description = "VLAN ID (0-4094)", -+ .set = ar40xx_sw_set_vid, -+ .get = ar40xx_sw_get_vid, -+ .max = 4094, -+ }, -+}; -+ -+/* End of swconfig support */ -+ -+static int -+ar40xx_wait_bit(struct ar40xx_priv *priv, int reg, u32 mask, u32 val) -+{ -+ int timeout = 20; -+ u32 t; -+ -+ while (1) { -+ t = ar40xx_read(priv, reg); -+ if ((t & mask) == val) -+ return 0; -+ -+ if (timeout-- <= 0) -+ break; -+ -+ usleep_range(10, 20); -+ } -+ -+ pr_err("ar40xx: timeout for reg %08x: %08x & %08x != %08x\n", -+ (unsigned int)reg, t, mask, val); -+ return -ETIMEDOUT; -+} -+ -+static int -+ar40xx_atu_flush(struct ar40xx_priv *priv) -+{ -+ int ret; -+ -+ ret = ar40xx_wait_bit(priv, AR40XX_REG_ATU_FUNC, -+ AR40XX_ATU_FUNC_BUSY, 0); -+ if (!ret) -+ ar40xx_write(priv, AR40XX_REG_ATU_FUNC, -+ AR40XX_ATU_FUNC_OP_FLUSH | -+ AR40XX_ATU_FUNC_BUSY); -+ -+ return ret; -+} -+ -+static void -+ar40xx_ess_reset(struct ar40xx_priv *priv) -+{ -+ reset_control_assert(priv->ess_rst); -+ mdelay(10); -+ reset_control_deassert(priv->ess_rst); -+ /* Waiting for all inner tables init done. -+ * It cost 5~10ms. -+ */ -+ mdelay(10); -+ -+ pr_info("ESS reset ok!\n"); -+} -+ -+/* Start of psgmii self test */ -+ -+static void -+ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv) -+{ -+ u32 n; -+ struct mii_bus *bus = priv->mii_bus; -+ /* reset phy psgmii */ -+ /* fix phy psgmii RX 20bit */ -+ mdiobus_write(bus, 5, 0x0, 0x005b); -+ /* reset phy psgmii */ -+ mdiobus_write(bus, 5, 0x0, 0x001b); -+ /* release reset phy psgmii */ -+ mdiobus_write(bus, 5, 0x0, 0x005b); -+ -+ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) { -+ u16 status; -+ -+ status = ar40xx_phy_mmd_read(priv, 5, 1, 0x28); -+ if (status & BIT(0)) -+ break; -+ /* Polling interval to check PSGMII PLL in malibu is ready -+ * the worst time is 8.67ms -+ * for 25MHz reference clock -+ * [512+(128+2048)*49]*80ns+100us -+ */ -+ mdelay(2); -+ } -+ -+ /*check malibu psgmii calibration done end..*/ -+ -+ /*freeze phy psgmii RX CDR*/ -+ mdiobus_write(bus, 5, 0x1a, 0x2230); -+ -+ ar40xx_ess_reset(priv); -+ -+ /*check psgmii calibration done start*/ -+ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) { -+ u32 status; -+ -+ status = ar40xx_psgmii_read(priv, 0xa0); -+ if (status & BIT(0)) -+ break; -+ /* Polling interval to check PSGMII PLL in ESS is ready */ -+ mdelay(2); -+ } -+ -+ /* check dakota psgmii calibration done end..*/ -+ -+ /* relesae phy psgmii RX CDR */ -+ mdiobus_write(bus, 5, 0x1a, 0x3230); -+ /* release phy psgmii RX 20bit */ -+ mdiobus_write(bus, 5, 0x0, 0x005f); -+} -+ -+static void -+ar40xx_psgmii_single_phy_testing(struct ar40xx_priv *priv, int phy) -+{ -+ int j; -+ u32 tx_ok, tx_error; -+ u32 rx_ok, rx_error; -+ u32 tx_ok_high16; -+ u32 rx_ok_high16; -+ u32 tx_all_ok, rx_all_ok; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mdiobus_write(bus, phy, 0x0, 0x9000); -+ mdiobus_write(bus, phy, 0x0, 0x4140); -+ -+ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) { -+ u16 status; -+ -+ status = mdiobus_read(bus, phy, 0x11); -+ if (status & AR40XX_PHY_SPEC_STATUS_LINK) -+ break; -+ /* the polling interval to check if the PHY link up or not -+ * maxwait_timer: 750 ms +/-10 ms -+ * minwait_timer : 1 us +/- 0.1us -+ * time resides in minwait_timer ~ maxwait_timer -+ * see IEEE 802.3 section 40.4.5.2 -+ */ -+ mdelay(8); -+ } -+ -+ /* enable check */ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0000); -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0003); -+ -+ /* start traffic */ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8020, 0xa000); -+ /* wait for all traffic end -+ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms -+ */ -+ mdelay(50); -+ -+ /* check counter */ -+ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e); -+ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d); -+ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f); -+ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b); -+ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a); -+ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c); -+ tx_all_ok = tx_ok + (tx_ok_high16 << 16); -+ rx_all_ok = rx_ok + (rx_ok_high16 << 16); -+ if (tx_all_ok == 0x1000 && tx_error == 0) { -+ /* success */ -+ priv->phy_t_status &= (~BIT(phy)); -+ } else { -+ pr_info("PHY %d single test PSGMII issue happen!\n", phy); -+ priv->phy_t_status |= BIT(phy); -+ } -+ -+ mdiobus_write(bus, phy, 0x0, 0x1840); -+} -+ -+static void -+ar40xx_psgmii_all_phy_testing(struct ar40xx_priv *priv) -+{ -+ int phy, j; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mdiobus_write(bus, 0x1f, 0x0, 0x9000); -+ mdiobus_write(bus, 0x1f, 0x0, 0x4140); -+ -+ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) { -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ u16 status; -+ -+ status = mdiobus_read(bus, phy, 0x11); -+ if (!(status & BIT(10))) -+ break; -+ } -+ -+ if (phy >= (AR40XX_NUM_PORTS - 1)) -+ break; -+ /* The polling interva to check if the PHY link up or not */ -+ mdelay(8); -+ } -+ /* enable check */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0000); -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0003); -+ -+ /* start traffic */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0xa000); -+ /* wait for all traffic end -+ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms -+ */ -+ mdelay(50); -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ u32 tx_ok, tx_error; -+ u32 rx_ok, rx_error; -+ u32 tx_ok_high16; -+ u32 rx_ok_high16; -+ u32 tx_all_ok, rx_all_ok; -+ -+ /* check counter */ -+ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e); -+ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d); -+ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f); -+ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b); -+ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a); -+ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c); -+ tx_all_ok = tx_ok + (tx_ok_high16<<16); -+ rx_all_ok = rx_ok + (rx_ok_high16<<16); -+ if (tx_all_ok == 0x1000 && tx_error == 0) { -+ /* success */ -+ priv->phy_t_status &= ~BIT(phy + 8); -+ } else { -+ pr_info("PHY%d test see issue!\n", phy); -+ priv->phy_t_status |= BIT(phy + 8); -+ } -+ } -+ -+ pr_debug("PHY all test 0x%x \r\n", priv->phy_t_status); -+} -+ -+void -+ar40xx_psgmii_self_test(struct ar40xx_priv *priv) -+{ -+ u32 i, phy; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ ar40xx_malibu_psgmii_ess_reset(priv); -+ -+ /* switch to access MII reg for copper */ -+ mdiobus_write(bus, 4, 0x1f, 0x8500); -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ /*enable phy mdio broadcast write*/ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x801f); -+ } -+ /* force no link by power down */ -+ mdiobus_write(bus, 0x1f, 0x0, 0x1840); -+ /*packet number*/ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x1000); -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8062, 0x05e0); -+ -+ /*fix mdi status */ -+ mdiobus_write(bus, 0x1f, 0x10, 0x6800); -+ for (i = 0; i < AR40XX_PSGMII_CALB_NUM; i++) { -+ priv->phy_t_status = 0; -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1), -+ AR40XX_PORT_LOOKUP_LOOPBACK, -+ AR40XX_PORT_LOOKUP_LOOPBACK); -+ } -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) -+ ar40xx_psgmii_single_phy_testing(priv, phy); -+ -+ ar40xx_psgmii_all_phy_testing(priv); -+ -+ if (priv->phy_t_status) -+ ar40xx_malibu_psgmii_ess_reset(priv); -+ else -+ break; -+ } -+ -+ if (i >= AR40XX_PSGMII_CALB_NUM) -+ pr_info("PSGMII cannot recover\n"); -+ else -+ pr_debug("PSGMII recovered after %d times reset\n", i); -+ -+ /* configuration recover */ -+ /* packet number */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x0); -+ /* disable check */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0); -+ /* disable traffic */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0x0); -+} -+ -+void -+ar40xx_psgmii_self_test_clean(struct ar40xx_priv *priv) -+{ -+ int phy; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ /* disable phy internal loopback */ -+ mdiobus_write(bus, 0x1f, 0x10, 0x6860); -+ mdiobus_write(bus, 0x1f, 0x0, 0x9040); -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ /* disable mac loop back */ -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1), -+ AR40XX_PORT_LOOKUP_LOOPBACK, 0); -+ /* disable phy mdio broadcast write */ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x001f); -+ } -+ -+ /* clear fdb entry */ -+ ar40xx_atu_flush(priv); -+} -+ -+/* End of psgmii self test */ -+ -+static void -+ar40xx_mac_mode_init(struct ar40xx_priv *priv, u32 mode) -+{ -+ if (mode == PORT_WRAPPER_PSGMII) { -+ ar40xx_psgmii_write(priv, AR40XX_PSGMII_MODE_CONTROL, 0x2200); -+ ar40xx_psgmii_write(priv, AR40XX_PSGMIIPHY_TX_CONTROL, 0x8380); -+ } -+} -+ -+static -+int ar40xx_cpuport_setup(struct ar40xx_priv *priv) -+{ -+ u32 t; -+ -+ t = AR40XX_PORT_STATUS_TXFLOW | -+ AR40XX_PORT_STATUS_RXFLOW | -+ AR40XX_PORT_TXHALF_FLOW | -+ AR40XX_PORT_DUPLEX | -+ AR40XX_PORT_SPEED_1000M; -+ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t); -+ usleep_range(10, 20); -+ -+ t |= AR40XX_PORT_TX_EN | -+ AR40XX_PORT_RX_EN; -+ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t); -+ -+ return 0; -+} -+ -+static void -+ar40xx_init_port(struct ar40xx_priv *priv, int port) -+{ -+ u32 t; -+ -+ ar40xx_rmw(priv, AR40XX_REG_PORT_STATUS(port), -+ AR40XX_PORT_AUTO_LINK_EN, 0); -+ -+ ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0); -+ -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0); -+ -+ t = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH << AR40XX_PORT_VLAN1_OUT_MODE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t); -+ -+ t = AR40XX_PORT_LOOKUP_LEARN; -+ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t); -+} -+ -+void -+ar40xx_init_globals(struct ar40xx_priv *priv) -+{ -+ u32 t; -+ -+ /* enable CPU port and disable mirror port */ -+ t = AR40XX_FWD_CTRL0_CPU_PORT_EN | -+ AR40XX_FWD_CTRL0_MIRROR_PORT; -+ ar40xx_write(priv, AR40XX_REG_FWD_CTRL0, t); -+ -+ /* forward multicast and broadcast frames to CPU */ -+ t = (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_UC_FLOOD_S) | -+ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_MC_FLOOD_S) | -+ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_BC_FLOOD_S); -+ ar40xx_write(priv, AR40XX_REG_FWD_CTRL1, t); -+ -+ /* enable jumbo frames */ -+ ar40xx_rmw(priv, AR40XX_REG_MAX_FRAME_SIZE, -+ AR40XX_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2); -+ -+ /* Enable MIB counters */ -+ ar40xx_rmw(priv, AR40XX_REG_MODULE_EN, 0, -+ AR40XX_MODULE_EN_MIB); -+ -+ /* Disable AZ */ -+ ar40xx_write(priv, AR40XX_REG_EEE_CTRL, 0); -+ -+ /* set flowctrl thershold for cpu port */ -+ t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) | -+ AR40XX_PORT0_FC_THRESH_OFF_DFLT; -+ ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t); -+} -+ -+static void -+ar40xx_malibu_init(struct ar40xx_priv *priv) -+{ -+ int i; -+ struct mii_bus *bus; -+ u16 val; -+ -+ bus = priv->mii_bus; -+ -+ /* war to enable AZ transmitting ability */ -+ ar40xx_phy_mmd_write(priv, AR40XX_PSGMII_ID, 1, -+ AR40XX_MALIBU_PSGMII_MODE_CTRL, -+ AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL); -+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { -+ /* change malibu control_dac */ -+ val = ar40xx_phy_mmd_read(priv, i, 7, -+ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL); -+ val &= ~AR40XX_MALIBU_DAC_CTRL_MASK; -+ val |= AR40XX_MALIBU_DAC_CTRL_VALUE; -+ ar40xx_phy_mmd_write(priv, i, 7, -+ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL, val); -+ if (i == AR40XX_MALIBU_PHY_LAST_ADDR) { -+ /* to avoid goes into hibernation */ -+ val = ar40xx_phy_mmd_read(priv, i, 3, -+ AR40XX_MALIBU_PHY_RLP_CTRL); -+ val &= (~(1<<1)); -+ ar40xx_phy_mmd_write(priv, i, 3, -+ AR40XX_MALIBU_PHY_RLP_CTRL, val); -+ } -+ } -+ -+ /* adjust psgmii serdes tx amp */ -+ mdiobus_write(bus, AR40XX_PSGMII_ID, AR40XX_PSGMII_TX_DRIVER_1_CTRL, -+ AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP); -+} -+ -+static int -+ar40xx_hw_init(struct ar40xx_priv *priv) -+{ -+ u32 i; -+ -+ ar40xx_ess_reset(priv); -+ -+ if (priv->mii_bus) -+ ar40xx_malibu_init(priv); -+ else -+ return -1; -+ -+ ar40xx_psgmii_self_test(priv); -+ ar40xx_psgmii_self_test_clean(priv); -+ -+ ar40xx_mac_mode_init(priv, priv->mac_mode); -+ -+ for (i = 0; i < priv->dev.ports; i++) -+ ar40xx_init_port(priv, i); -+ -+ ar40xx_init_globals(priv); -+ -+ return 0; -+} -+ -+/* Start of qm error WAR */ -+ -+static -+int ar40xx_force_1g_full(struct ar40xx_priv *priv, u32 port_id) -+{ -+ u32 reg; -+ -+ if (port_id < 0 || port_id > 6) -+ return -1; -+ -+ reg = AR40XX_REG_PORT_STATUS(port_id); -+ return ar40xx_rmw(priv, reg, AR40XX_PORT_SPEED, -+ (AR40XX_PORT_SPEED_1000M | AR40XX_PORT_DUPLEX)); -+} -+ -+static -+int ar40xx_get_qm_status(struct ar40xx_priv *priv, -+ u32 port_id, u32 *qm_buffer_err) -+{ -+ u32 reg; -+ u32 qm_val; -+ -+ if (port_id < 1 || port_id > 5) { -+ *qm_buffer_err = 0; -+ return -1; -+ } -+ -+ if (port_id < 4) { -+ reg = AR40XX_REG_QM_PORT0_3_QNUM; -+ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg); -+ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE); -+ /* every 8 bits for each port */ -+ *qm_buffer_err = (qm_val >> (port_id * 8)) & 0xFF; -+ } else { -+ reg = AR40XX_REG_QM_PORT4_6_QNUM; -+ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg); -+ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE); -+ /* every 8 bits for each port */ -+ *qm_buffer_err = (qm_val >> ((port_id-4) * 8)) & 0xFF; -+ } -+ -+ return 0; -+} -+ -+static void -+ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv) -+{ -+ static int task_count; -+ u32 i; -+ u32 reg, value; -+ u32 link, speed, duplex; -+ u32 qm_buffer_err; -+ u16 port_phy_status[AR40XX_NUM_PORTS]; -+ static u32 qm_err_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0}; -+ static u32 link_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0}; -+ struct mii_bus *bus = NULL; -+ -+ if (!priv || !priv->mii_bus) -+ return; -+ -+ bus = priv->mii_bus; -+ -+ ++task_count; -+ -+ for (i = 1; i < AR40XX_NUM_PORTS; ++i) { -+ port_phy_status[i] = -+ mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS); -+ speed = link = duplex = port_phy_status[i]; -+ speed &= AR40XX_PHY_SPEC_STATUS_SPEED; -+ speed >>= 14; -+ link &= AR40XX_PHY_SPEC_STATUS_LINK; -+ link >>= 10; -+ duplex &= AR40XX_PHY_SPEC_STATUS_DUPLEX; -+ duplex >>= 13; -+ -+ if (link != priv->ar40xx_port_old_link[i]) { -+ ++link_cnt[i]; -+ /* Up --> Down */ -+ if ((priv->ar40xx_port_old_link[i] == -+ AR40XX_PORT_LINK_UP) && -+ (link == AR40XX_PORT_LINK_DOWN)) { -+ /* LINK_EN disable(MAC force mode)*/ -+ reg = AR40XX_REG_PORT_STATUS(i); -+ ar40xx_rmw(priv, reg, -+ AR40XX_PORT_AUTO_LINK_EN, 0); -+ -+ /* Check queue buffer */ -+ qm_err_cnt[i] = 0; -+ ar40xx_get_qm_status(priv, i, &qm_buffer_err); -+ if (qm_buffer_err) { -+ priv->ar40xx_port_qm_buf[i] = -+ AR40XX_QM_NOT_EMPTY; -+ } else { -+ u16 phy_val = 0; -+ -+ priv->ar40xx_port_qm_buf[i] = -+ AR40XX_QM_EMPTY; -+ ar40xx_force_1g_full(priv, i); -+ /* Ref:QCA8337 Datasheet,Clearing -+ * MENU_CTRL_EN prevents phy to -+ * stuck in 100BT mode when -+ * bringing up the link -+ */ -+ ar40xx_phy_dbg_read(priv, i-1, -+ AR40XX_PHY_DEBUG_0, -+ &phy_val); -+ phy_val &= (~AR40XX_PHY_MANU_CTRL_EN); -+ ar40xx_phy_dbg_write(priv, i-1, -+ AR40XX_PHY_DEBUG_0, -+ phy_val); -+ } -+ priv->ar40xx_port_old_link[i] = link; -+ } else if ((priv->ar40xx_port_old_link[i] == -+ AR40XX_PORT_LINK_DOWN) && -+ (link == AR40XX_PORT_LINK_UP)) { -+ /* Down --> Up */ -+ if (priv->port_link_up[i] < 1) { -+ ++priv->port_link_up[i]; -+ } else { -+ /* Change port status */ -+ reg = AR40XX_REG_PORT_STATUS(i); -+ value = ar40xx_read(priv, reg); -+ priv->port_link_up[i] = 0; -+ -+ value &= ~(AR40XX_PORT_DUPLEX | -+ AR40XX_PORT_SPEED); -+ value |= speed | (duplex ? BIT(6) : 0); -+ ar40xx_write(priv, reg, value); -+ /* clock switch need such time -+ * to avoid glitch -+ */ -+ usleep_range(100, 200); -+ -+ value |= AR40XX_PORT_AUTO_LINK_EN; -+ ar40xx_write(priv, reg, value); -+ /* HW need such time to make sure link -+ * stable before enable MAC -+ */ -+ usleep_range(100, 200); -+ -+ if (speed == AR40XX_PORT_SPEED_100M) { -+ u16 phy_val = 0; -+ /* Enable @100M, if down to 10M -+ * clock will change smoothly -+ */ -+ ar40xx_phy_dbg_read(priv, i-1, -+ 0, -+ &phy_val); -+ phy_val |= -+ AR40XX_PHY_MANU_CTRL_EN; -+ ar40xx_phy_dbg_write(priv, i-1, -+ 0, -+ phy_val); -+ } -+ priv->ar40xx_port_old_link[i] = link; -+ } -+ } -+ } -+ -+ if (priv->ar40xx_port_qm_buf[i] == AR40XX_QM_NOT_EMPTY) { -+ /* Check QM */ -+ ar40xx_get_qm_status(priv, i, &qm_buffer_err); -+ if (qm_buffer_err) { -+ ++qm_err_cnt[i]; -+ } else { -+ priv->ar40xx_port_qm_buf[i] = -+ AR40XX_QM_EMPTY; -+ qm_err_cnt[i] = 0; -+ ar40xx_force_1g_full(priv, i); -+ } -+ } -+ } -+} -+ -+static void -+ar40xx_qm_err_check_work_task(struct work_struct *work) -+{ -+ struct ar40xx_priv *priv = container_of(work, struct ar40xx_priv, -+ qm_dwork.work); -+ -+ mutex_lock(&priv->qm_lock); -+ -+ ar40xx_sw_mac_polling_task(priv); -+ -+ mutex_unlock(&priv->qm_lock); -+ -+ schedule_delayed_work(&priv->qm_dwork, -+ msecs_to_jiffies(AR40XX_QM_WORK_DELAY)); -+} -+ -+static int -+ar40xx_qm_err_check_work_start(struct ar40xx_priv *priv) -+{ -+ mutex_init(&priv->qm_lock); -+ -+ INIT_DELAYED_WORK(&priv->qm_dwork, ar40xx_qm_err_check_work_task); -+ -+ schedule_delayed_work(&priv->qm_dwork, -+ msecs_to_jiffies(AR40XX_QM_WORK_DELAY)); -+ -+ return 0; -+} -+ -+/* End of qm error WAR */ -+ -+static int -+ar40xx_vlan_init(struct ar40xx_priv *priv) -+{ -+ int port; -+ unsigned long bmp; -+ -+ /* By default Enable VLAN */ -+ priv->vlan = 1; -+ priv->vlan_table[AR40XX_LAN_VLAN] = priv->cpu_bmp | priv->lan_bmp; -+ priv->vlan_table[AR40XX_WAN_VLAN] = priv->cpu_bmp | priv->wan_bmp; -+ priv->vlan_tagged = priv->cpu_bmp; -+ bmp = priv->lan_bmp; -+ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS) -+ priv->pvid[port] = AR40XX_LAN_VLAN; -+ -+ bmp = priv->wan_bmp; -+ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS) -+ priv->pvid[port] = AR40XX_WAN_VLAN; -+ -+ return 0; -+} -+ -+static void -+ar40xx_mib_work_func(struct work_struct *work) -+{ -+ struct ar40xx_priv *priv; -+ int err; -+ -+ priv = container_of(work, struct ar40xx_priv, mib_work.work); -+ -+ mutex_lock(&priv->mib_lock); -+ -+ err = ar40xx_mib_capture(priv); -+ if (err) -+ goto next_port; -+ -+ ar40xx_mib_fetch_port_stat(priv, priv->mib_next_port, false); -+ -+next_port: -+ priv->mib_next_port++; -+ if (priv->mib_next_port >= priv->dev.ports) -+ priv->mib_next_port = 0; -+ -+ mutex_unlock(&priv->mib_lock); -+ -+ schedule_delayed_work(&priv->mib_work, -+ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY)); -+} -+ -+static void -+ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members) -+{ -+ u32 t; -+ u32 egress, ingress; -+ u32 pvid = priv->vlan_id[priv->pvid[port]]; -+ -+ if (priv->vlan) { -+ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD; -+ ingress = AR40XX_IN_SECURE; -+ } else { -+ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH; -+ ingress = AR40XX_IN_PORT_ONLY; -+ } -+ -+ t = pvid << AR40XX_PORT_VLAN0_DEF_SVID_S; -+ t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t); -+ -+ t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP; -+ t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t); -+ -+ t = members; -+ t |= AR40XX_PORT_LOOKUP_LEARN; -+ t |= ingress << AR40XX_PORT_LOOKUP_IN_MODE_S; -+ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t); -+} -+ -+static void -+ar40xx_vtu_op(struct ar40xx_priv *priv, u32 op, u32 val) -+{ -+ if (ar40xx_wait_bit(priv, AR40XX_REG_VTU_FUNC1, -+ AR40XX_VTU_FUNC1_BUSY, 0)) -+ return; -+ -+ if ((op & AR40XX_VTU_FUNC1_OP) == AR40XX_VTU_FUNC1_OP_LOAD) -+ ar40xx_write(priv, AR40XX_REG_VTU_FUNC0, val); -+ -+ op |= AR40XX_VTU_FUNC1_BUSY; -+ ar40xx_write(priv, AR40XX_REG_VTU_FUNC1, op); -+} -+ -+static void -+ar40xx_vtu_load_vlan(struct ar40xx_priv *priv, u32 vid, u32 port_mask) -+{ -+ u32 op; -+ u32 val; -+ int i; -+ -+ op = AR40XX_VTU_FUNC1_OP_LOAD | (vid << AR40XX_VTU_FUNC1_VID_S); -+ val = AR40XX_VTU_FUNC0_VALID | AR40XX_VTU_FUNC0_IVL; -+ for (i = 0; i < AR40XX_NUM_PORTS; i++) { -+ u32 mode; -+ -+ if ((port_mask & BIT(i)) == 0) -+ mode = AR40XX_VTU_FUNC0_EG_MODE_NOT; -+ else if (priv->vlan == 0) -+ mode = AR40XX_VTU_FUNC0_EG_MODE_KEEP; -+ else if ((priv->vlan_tagged & BIT(i)) || -+ (priv->vlan_id[priv->pvid[i]] != vid)) -+ mode = AR40XX_VTU_FUNC0_EG_MODE_TAG; -+ else -+ mode = AR40XX_VTU_FUNC0_EG_MODE_UNTAG; -+ -+ val |= mode << AR40XX_VTU_FUNC0_EG_MODE_S(i); -+ } -+ ar40xx_vtu_op(priv, op, val); -+} -+ -+static void -+ar40xx_vtu_flush(struct ar40xx_priv *priv) -+{ -+ ar40xx_vtu_op(priv, AR40XX_VTU_FUNC1_OP_FLUSH, 0); -+} -+ -+static int -+ar40xx_sw_hw_apply(struct switch_dev *dev) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u8 portmask[AR40XX_NUM_PORTS]; -+ int i, j; -+ -+ mutex_lock(&priv->reg_mutex); -+ /* flush all vlan entries */ -+ ar40xx_vtu_flush(priv); -+ -+ memset(portmask, 0, sizeof(portmask)); -+ if (priv->vlan) { -+ for (j = 0; j < AR40XX_MAX_VLANS; j++) { -+ u8 vp = priv->vlan_table[j]; -+ -+ if (!vp) -+ continue; -+ -+ for (i = 0; i < dev->ports; i++) { -+ u8 mask = BIT(i); -+ -+ if (vp & mask) -+ portmask[i] |= vp & ~mask; -+ } -+ -+ ar40xx_vtu_load_vlan(priv, priv->vlan_id[j], -+ priv->vlan_table[j]); -+ } -+ } else { -+ /* 8021q vlan disabled */ -+ for (i = 0; i < dev->ports; i++) { -+ if (i == AR40XX_PORT_CPU) -+ continue; -+ -+ portmask[i] = BIT(AR40XX_PORT_CPU); -+ portmask[AR40XX_PORT_CPU] |= BIT(i); -+ } -+ } -+ -+ /* update the port destination mask registers and tag settings */ -+ for (i = 0; i < dev->ports; i++) -+ ar40xx_setup_port(priv, i, portmask[i]); -+ -+ ar40xx_set_mirror_regs(priv); -+ -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_reset_switch(struct switch_dev *dev) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ int i, rv; -+ -+ mutex_lock(&priv->reg_mutex); -+ memset(&priv->vlan, 0, sizeof(struct ar40xx_priv) - -+ offsetof(struct ar40xx_priv, vlan)); -+ -+ for (i = 0; i < AR40XX_MAX_VLANS; i++) -+ priv->vlan_id[i] = i; -+ -+ ar40xx_vlan_init(priv); -+ -+ priv->mirror_rx = false; -+ priv->mirror_tx = false; -+ priv->source_port = 0; -+ priv->monitor_port = 0; -+ -+ mutex_unlock(&priv->reg_mutex); -+ -+ rv = ar40xx_sw_hw_apply(dev); -+ return rv; -+} -+ -+static int -+ar40xx_start(struct ar40xx_priv *priv) -+{ -+ int ret; -+ -+ ret = ar40xx_hw_init(priv); -+ if (ret) -+ return ret; -+ -+ ret = ar40xx_sw_reset_switch(&priv->dev); -+ if (ret) -+ return ret; -+ -+ /* at last, setup cpu port */ -+ ret = ar40xx_cpuport_setup(priv); -+ if (ret) -+ return ret; -+ -+ schedule_delayed_work(&priv->mib_work, -+ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY)); -+ -+ ar40xx_qm_err_check_work_start(priv); -+ -+ return 0; -+} -+ -+static const struct switch_dev_ops ar40xx_sw_ops = { -+ .attr_global = { -+ .attr = ar40xx_sw_attr_globals, -+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_globals), -+ }, -+ .attr_port = { -+ .attr = ar40xx_sw_attr_port, -+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_port), -+ }, -+ .attr_vlan = { -+ .attr = ar40xx_sw_attr_vlan, -+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_vlan), -+ }, -+ .get_port_pvid = ar40xx_sw_get_pvid, -+ .set_port_pvid = ar40xx_sw_set_pvid, -+ .get_vlan_ports = ar40xx_sw_get_ports, -+ .set_vlan_ports = ar40xx_sw_set_ports, -+ .apply_config = ar40xx_sw_hw_apply, -+ .reset_switch = ar40xx_sw_reset_switch, -+ .get_port_link = ar40xx_sw_get_port_link, -+}; -+ -+/* Start of phy driver support */ -+ -+static const u32 ar40xx_phy_ids[] = { -+ 0x004dd0b1, -+ 0x004dd0b2, /* AR40xx */ -+}; -+ -+static bool -+ar40xx_phy_match(u32 phy_id) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(ar40xx_phy_ids); i++) -+ if (phy_id == ar40xx_phy_ids[i]) -+ return true; -+ -+ return false; -+} -+ -+static bool -+is_ar40xx_phy(struct mii_bus *bus) -+{ -+ unsigned i; -+ -+ for (i = 0; i < 4; i++) { -+ u32 phy_id; -+ -+ phy_id = mdiobus_read(bus, i, MII_PHYSID1) << 16; -+ phy_id |= mdiobus_read(bus, i, MII_PHYSID2); -+ if (!ar40xx_phy_match(phy_id)) -+ return false; -+ } -+ -+ return true; -+} -+ -+static int -+ar40xx_phy_probe(struct phy_device *phydev) -+{ -+ if (!is_ar40xx_phy(phydev->mdio.bus)) -+ return -ENODEV; -+ -+ ar40xx_priv->mii_bus = phydev->mdio.bus; -+ phydev->priv = ar40xx_priv; -+ if (phydev->mdio.addr == 0) -+ ar40xx_priv->phy = phydev; -+ -+ phydev->supported |= SUPPORTED_1000baseT_Full; -+ phydev->advertising |= ADVERTISED_1000baseT_Full; -+ return 0; -+} -+ -+static void -+ar40xx_phy_remove(struct phy_device *phydev) -+{ -+ ar40xx_priv->mii_bus = NULL; -+ phydev->priv = NULL; -+} -+ -+static int -+ar40xx_phy_config_init(struct phy_device *phydev) -+{ -+ return 0; -+} -+ -+static int -+ar40xx_phy_read_status(struct phy_device *phydev) -+{ -+ if (phydev->mdio.addr != 0) -+ return genphy_read_status(phydev); -+ -+ return 0; -+} -+ -+static int -+ar40xx_phy_config_aneg(struct phy_device *phydev) -+{ -+ if (phydev->mdio.addr == 0) -+ return 0; -+ -+ return genphy_config_aneg(phydev); -+} -+ -+static struct phy_driver ar40xx_phy_driver = { -+ .phy_id = 0x004d0000, -+ .name = "QCA Malibu", -+ .phy_id_mask = 0xffff0000, -+ .features = PHY_BASIC_FEATURES, -+ .probe = ar40xx_phy_probe, -+ .remove = ar40xx_phy_remove, -+ .config_init = ar40xx_phy_config_init, -+ .config_aneg = ar40xx_phy_config_aneg, -+ .read_status = ar40xx_phy_read_status, -+}; -+ -+static uint16_t ar40xx_gpio_get_phy(unsigned int offset) -+{ -+ return offset / 4; -+} -+ -+static uint16_t ar40xx_gpio_get_reg(unsigned int offset) -+{ -+ return 0x8074 + offset % 4; -+} -+ -+static void ar40xx_gpio_set(struct gpio_chip *gc, unsigned int offset, -+ int value) -+{ -+ struct ar40xx_priv *priv = gpiochip_get_data(gc); -+ -+ ar40xx_phy_mmd_write(priv, ar40xx_gpio_get_phy(offset), 0x7, -+ ar40xx_gpio_get_reg(offset), -+ value ? 0xA000 : 0x8000); -+} -+ -+static int ar40xx_gpio_get(struct gpio_chip *gc, unsigned offset) -+{ -+ struct ar40xx_priv *priv = gpiochip_get_data(gc); -+ -+ return ar40xx_phy_mmd_read(priv, ar40xx_gpio_get_phy(offset), 0x7, -+ ar40xx_gpio_get_reg(offset)) == 0xA000; -+} -+ -+static int ar40xx_gpio_get_dir(struct gpio_chip *gc, unsigned offset) -+{ -+ return 0; /* only out direction */ -+} -+ -+static int ar40xx_gpio_dir_out(struct gpio_chip *gc, unsigned offset, -+ int value) -+{ -+ /* -+ * the direction out value is used to set the initial value. -+ * support of this function is required by leds-gpio.c -+ */ -+ ar40xx_gpio_set(gc, offset, value); -+ return 0; -+} -+ -+static void ar40xx_register_gpio(struct device *pdev, -+ struct ar40xx_priv *priv, -+ struct device_node *switch_node) -+{ -+ struct gpio_chip *gc; -+ int err; -+ -+ gc = devm_kzalloc(pdev, sizeof(*gc), GFP_KERNEL); -+ if (!gc) -+ return; -+ -+ gc->label = "ar40xx_gpio", -+ gc->base = -1, -+ gc->ngpio = 5 /* mmd 0 - 4 */ * 4 /* 0x8074 - 0x8077 */, -+ gc->parent = pdev; -+ gc->owner = THIS_MODULE; -+ -+ gc->get_direction = ar40xx_gpio_get_dir; -+ gc->direction_output = ar40xx_gpio_dir_out; -+ gc->get = ar40xx_gpio_get; -+ gc->set = ar40xx_gpio_set; -+ gc->can_sleep = true; -+ gc->label = priv->dev.name; -+ gc->of_node = switch_node; -+ -+ err = devm_gpiochip_add_data(pdev, gc, priv); -+ if (err != 0) -+ dev_err(pdev, "Failed to register gpio %d.\n", err); -+} -+ -+/* End of phy driver support */ -+ -+/* Platform driver probe function */ -+ -+static int ar40xx_probe(struct platform_device *pdev) -+{ -+ struct device_node *switch_node; -+ struct device_node *psgmii_node; -+ const __be32 *mac_mode; -+ struct clk *ess_clk; -+ struct switch_dev *swdev; -+ struct ar40xx_priv *priv; -+ u32 len; -+ u32 num_mibs; -+ struct resource psgmii_base = {0}; -+ struct resource switch_base = {0}; -+ int ret; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, priv); -+ ar40xx_priv = priv; -+ -+ switch_node = of_node_get(pdev->dev.of_node); -+ if (of_address_to_resource(switch_node, 0, &switch_base) != 0) -+ return -EIO; -+ -+ priv->hw_addr = devm_ioremap_resource(&pdev->dev, &switch_base); -+ if (IS_ERR(priv->hw_addr)) { -+ dev_err(&pdev->dev, "Failed to ioremap switch_base!\n"); -+ return PTR_ERR(priv->hw_addr); -+ } -+ -+ /*psgmii dts get*/ -+ psgmii_node = of_find_node_by_name(NULL, "ess-psgmii"); -+ if (!psgmii_node) { -+ dev_err(&pdev->dev, "Failed to find ess-psgmii node!\n"); -+ return -EINVAL; -+ } -+ -+ if (of_address_to_resource(psgmii_node, 0, &psgmii_base) != 0) -+ return -EIO; -+ -+ priv->psgmii_hw_addr = devm_ioremap_resource(&pdev->dev, &psgmii_base); -+ if (IS_ERR(priv->psgmii_hw_addr)) { -+ dev_err(&pdev->dev, "psgmii ioremap fail!\n"); -+ return PTR_ERR(priv->psgmii_hw_addr); -+ } -+ -+ mac_mode = of_get_property(switch_node, "switch_mac_mode", &len); -+ if (!mac_mode) { -+ dev_err(&pdev->dev, "Failed to read switch_mac_mode\n"); -+ return -EINVAL; -+ } -+ priv->mac_mode = be32_to_cpup(mac_mode); -+ -+ ess_clk = of_clk_get_by_name(switch_node, "ess_clk"); -+ if (ess_clk) -+ clk_prepare_enable(ess_clk); -+ -+ priv->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst"); -+ if (IS_ERR(priv->ess_rst)) { -+ dev_err(&pdev->dev, "Failed to get ess_rst control!\n"); -+ return PTR_ERR(priv->ess_rst); -+ } -+ -+ if (of_property_read_u32(switch_node, "switch_cpu_bmp", -+ &priv->cpu_bmp) || -+ of_property_read_u32(switch_node, "switch_lan_bmp", -+ &priv->lan_bmp) || -+ of_property_read_u32(switch_node, "switch_wan_bmp", -+ &priv->wan_bmp)) { -+ dev_err(&pdev->dev, "Failed to read port properties\n"); -+ return -EIO; -+ } -+ -+ ret = phy_driver_register(&ar40xx_phy_driver, THIS_MODULE); -+ if (ret) { -+ dev_err(&pdev->dev, "Failed to register ar40xx phy driver!\n"); -+ return -EIO; -+ } -+ -+ mutex_init(&priv->reg_mutex); -+ mutex_init(&priv->mib_lock); -+ INIT_DELAYED_WORK(&priv->mib_work, ar40xx_mib_work_func); -+ -+ /* register switch */ -+ swdev = &priv->dev; -+ -+ swdev->alias = dev_name(&priv->mii_bus->dev); -+ -+ swdev->cpu_port = AR40XX_PORT_CPU; -+ swdev->name = "QCA AR40xx"; -+ swdev->vlans = AR40XX_MAX_VLANS; -+ swdev->ports = AR40XX_NUM_PORTS; -+ swdev->ops = &ar40xx_sw_ops; -+ ret = register_switch(swdev, NULL); -+ if (ret) -+ goto err_unregister_phy; -+ -+ num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ len = priv->dev.ports * num_mibs * -+ sizeof(*priv->mib_stats); -+ priv->mib_stats = devm_kzalloc(&pdev->dev, len, GFP_KERNEL); -+ if (!priv->mib_stats) { -+ ret = -ENOMEM; -+ goto err_unregister_switch; -+ } -+ -+ ar40xx_start(priv); -+ -+ if (of_property_read_bool(switch_node, "gpio-controller")) -+ ar40xx_register_gpio(&pdev->dev, ar40xx_priv, switch_node); -+ -+ return 0; -+ -+err_unregister_switch: -+ unregister_switch(&priv->dev); -+err_unregister_phy: -+ phy_driver_unregister(&ar40xx_phy_driver); -+ platform_set_drvdata(pdev, NULL); -+ return ret; -+} -+ -+static int ar40xx_remove(struct platform_device *pdev) -+{ -+ struct ar40xx_priv *priv = platform_get_drvdata(pdev); -+ -+ cancel_delayed_work_sync(&priv->qm_dwork); -+ cancel_delayed_work_sync(&priv->mib_work); -+ -+ unregister_switch(&priv->dev); -+ -+ phy_driver_unregister(&ar40xx_phy_driver); -+ -+ return 0; -+} -+ -+static const struct of_device_id ar40xx_of_mtable[] = { -+ {.compatible = "qcom,ess-switch" }, -+ {} -+}; -+ -+struct platform_driver ar40xx_drv = { -+ .probe = ar40xx_probe, -+ .remove = ar40xx_remove, -+ .driver = { -+ .name = "ar40xx", -+ .of_match_table = ar40xx_of_mtable, -+ }, -+}; -+ -+module_platform_driver(ar40xx_drv); -+ -+MODULE_DESCRIPTION("IPQ40XX ESS driver"); -+MODULE_LICENSE("Dual BSD/GPL"); ---- /dev/null -+++ b/drivers/net/phy/ar40xx.h -@@ -0,0 +1,337 @@ -+/* -+ * Copyright (c) 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+ #ifndef __AR40XX_H -+#define __AR40XX_H -+ -+#define AR40XX_MAX_VLANS 128 -+#define AR40XX_NUM_PORTS 6 -+#define AR40XX_NUM_PHYS 5 -+ -+#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s) -+ -+struct ar40xx_priv { -+ struct switch_dev dev; -+ -+ u8 __iomem *hw_addr; -+ u8 __iomem *psgmii_hw_addr; -+ u32 mac_mode; -+ struct reset_control *ess_rst; -+ u32 cpu_bmp; -+ u32 lan_bmp; -+ u32 wan_bmp; -+ -+ struct mii_bus *mii_bus; -+ struct phy_device *phy; -+ -+ /* mutex for qm task */ -+ struct mutex qm_lock; -+ struct delayed_work qm_dwork; -+ u32 port_link_up[AR40XX_NUM_PORTS]; -+ u32 ar40xx_port_old_link[AR40XX_NUM_PORTS]; -+ u32 ar40xx_port_qm_buf[AR40XX_NUM_PORTS]; -+ -+ u32 phy_t_status; -+ -+ /* mutex for switch reg access */ -+ struct mutex reg_mutex; -+ -+ /* mutex for mib task */ -+ struct mutex mib_lock; -+ struct delayed_work mib_work; -+ int mib_next_port; -+ u64 *mib_stats; -+ -+ char buf[2048]; -+ -+ /* all fields below will be cleared on reset */ -+ bool vlan; -+ u16 vlan_id[AR40XX_MAX_VLANS]; -+ u8 vlan_table[AR40XX_MAX_VLANS]; -+ u8 vlan_tagged; -+ u16 pvid[AR40XX_NUM_PORTS]; -+ -+ /* mirror */ -+ bool mirror_rx; -+ bool mirror_tx; -+ int source_port; -+ int monitor_port; -+}; -+ -+#define AR40XX_PORT_LINK_UP 1 -+#define AR40XX_PORT_LINK_DOWN 0 -+#define AR40XX_QM_NOT_EMPTY 1 -+#define AR40XX_QM_EMPTY 0 -+ -+#define AR40XX_LAN_VLAN 1 -+#define AR40XX_WAN_VLAN 2 -+ -+enum ar40xx_port_wrapper_cfg { -+ PORT_WRAPPER_PSGMII = 0, -+}; -+ -+struct ar40xx_mib_desc { -+ u32 size; -+ u32 offset; -+ const char *name; -+}; -+ -+#define AR40XX_PORT_CPU 0 -+ -+#define AR40XX_PSGMII_MODE_CONTROL 0x1b4 -+#define AR40XX_PSGMII_ATHR_CSCO_MODE_25M BIT(0) -+ -+#define AR40XX_PSGMIIPHY_TX_CONTROL 0x288 -+ -+#define AR40XX_MII_ATH_MMD_ADDR 0x0d -+#define AR40XX_MII_ATH_MMD_DATA 0x0e -+#define AR40XX_MII_ATH_DBG_ADDR 0x1d -+#define AR40XX_MII_ATH_DBG_DATA 0x1e -+ -+#define AR40XX_STATS_RXBROAD 0x00 -+#define AR40XX_STATS_RXPAUSE 0x04 -+#define AR40XX_STATS_RXMULTI 0x08 -+#define AR40XX_STATS_RXFCSERR 0x0c -+#define AR40XX_STATS_RXALIGNERR 0x10 -+#define AR40XX_STATS_RXRUNT 0x14 -+#define AR40XX_STATS_RXFRAGMENT 0x18 -+#define AR40XX_STATS_RX64BYTE 0x1c -+#define AR40XX_STATS_RX128BYTE 0x20 -+#define AR40XX_STATS_RX256BYTE 0x24 -+#define AR40XX_STATS_RX512BYTE 0x28 -+#define AR40XX_STATS_RX1024BYTE 0x2c -+#define AR40XX_STATS_RX1518BYTE 0x30 -+#define AR40XX_STATS_RXMAXBYTE 0x34 -+#define AR40XX_STATS_RXTOOLONG 0x38 -+#define AR40XX_STATS_RXGOODBYTE 0x3c -+#define AR40XX_STATS_RXBADBYTE 0x44 -+#define AR40XX_STATS_RXOVERFLOW 0x4c -+#define AR40XX_STATS_FILTERED 0x50 -+#define AR40XX_STATS_TXBROAD 0x54 -+#define AR40XX_STATS_TXPAUSE 0x58 -+#define AR40XX_STATS_TXMULTI 0x5c -+#define AR40XX_STATS_TXUNDERRUN 0x60 -+#define AR40XX_STATS_TX64BYTE 0x64 -+#define AR40XX_STATS_TX128BYTE 0x68 -+#define AR40XX_STATS_TX256BYTE 0x6c -+#define AR40XX_STATS_TX512BYTE 0x70 -+#define AR40XX_STATS_TX1024BYTE 0x74 -+#define AR40XX_STATS_TX1518BYTE 0x78 -+#define AR40XX_STATS_TXMAXBYTE 0x7c -+#define AR40XX_STATS_TXOVERSIZE 0x80 -+#define AR40XX_STATS_TXBYTE 0x84 -+#define AR40XX_STATS_TXCOLLISION 0x8c -+#define AR40XX_STATS_TXABORTCOL 0x90 -+#define AR40XX_STATS_TXMULTICOL 0x94 -+#define AR40XX_STATS_TXSINGLECOL 0x98 -+#define AR40XX_STATS_TXEXCDEFER 0x9c -+#define AR40XX_STATS_TXDEFER 0xa0 -+#define AR40XX_STATS_TXLATECOL 0xa4 -+ -+#define AR40XX_REG_MODULE_EN 0x030 -+#define AR40XX_MODULE_EN_MIB BIT(0) -+ -+#define AR40XX_REG_MIB_FUNC 0x034 -+#define AR40XX_MIB_BUSY BIT(17) -+#define AR40XX_MIB_CPU_KEEP BIT(20) -+#define AR40XX_MIB_FUNC BITS(24, 3) -+#define AR40XX_MIB_FUNC_S 24 -+#define AR40XX_MIB_FUNC_NO_OP 0x0 -+#define AR40XX_MIB_FUNC_FLUSH 0x1 -+ -+#define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4) -+#define AR40XX_PORT_SPEED BITS(0, 2) -+#define AR40XX_PORT_STATUS_SPEED_S 0 -+#define AR40XX_PORT_TX_EN BIT(2) -+#define AR40XX_PORT_RX_EN BIT(3) -+#define AR40XX_PORT_STATUS_TXFLOW BIT(4) -+#define AR40XX_PORT_STATUS_RXFLOW BIT(5) -+#define AR40XX_PORT_DUPLEX BIT(6) -+#define AR40XX_PORT_TXHALF_FLOW BIT(7) -+#define AR40XX_PORT_STATUS_LINK_UP BIT(8) -+#define AR40XX_PORT_AUTO_LINK_EN BIT(9) -+#define AR40XX_PORT_STATUS_FLOW_CONTROL BIT(12) -+ -+#define AR40XX_REG_MAX_FRAME_SIZE 0x078 -+#define AR40XX_MAX_FRAME_SIZE_MTU BITS(0, 14) -+ -+#define AR40XX_REG_PORT_HEADER(_i) (0x09c + (_i) * 4) -+ -+#define AR40XX_REG_EEE_CTRL 0x100 -+#define AR40XX_EEE_CTRL_DISABLE_PHY(_i) BIT(4 + (_i) * 2) -+ -+#define AR40XX_REG_PORT_VLAN0(_i) (0x420 + (_i) * 0x8) -+#define AR40XX_PORT_VLAN0_DEF_SVID BITS(0, 12) -+#define AR40XX_PORT_VLAN0_DEF_SVID_S 0 -+#define AR40XX_PORT_VLAN0_DEF_CVID BITS(16, 12) -+#define AR40XX_PORT_VLAN0_DEF_CVID_S 16 -+ -+#define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8) -+#define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6) -+#define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2) -+#define AR40XX_PORT_VLAN1_OUT_MODE_S 12 -+#define AR40XX_PORT_VLAN1_OUT_MODE_UNMOD 0 -+#define AR40XX_PORT_VLAN1_OUT_MODE_UNTAG 1 -+#define AR40XX_PORT_VLAN1_OUT_MODE_TAG 2 -+#define AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH 3 -+ -+#define AR40XX_REG_VTU_FUNC0 0x0610 -+#define AR40XX_VTU_FUNC0_EG_MODE BITS(4, 14) -+#define AR40XX_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2) -+#define AR40XX_VTU_FUNC0_EG_MODE_KEEP 0 -+#define AR40XX_VTU_FUNC0_EG_MODE_UNTAG 1 -+#define AR40XX_VTU_FUNC0_EG_MODE_TAG 2 -+#define AR40XX_VTU_FUNC0_EG_MODE_NOT 3 -+#define AR40XX_VTU_FUNC0_IVL BIT(19) -+#define AR40XX_VTU_FUNC0_VALID BIT(20) -+ -+#define AR40XX_REG_VTU_FUNC1 0x0614 -+#define AR40XX_VTU_FUNC1_OP BITS(0, 3) -+#define AR40XX_VTU_FUNC1_OP_NOOP 0 -+#define AR40XX_VTU_FUNC1_OP_FLUSH 1 -+#define AR40XX_VTU_FUNC1_OP_LOAD 2 -+#define AR40XX_VTU_FUNC1_OP_PURGE 3 -+#define AR40XX_VTU_FUNC1_OP_REMOVE_PORT 4 -+#define AR40XX_VTU_FUNC1_OP_GET_NEXT 5 -+#define AR40XX7_VTU_FUNC1_OP_GET_ONE 6 -+#define AR40XX_VTU_FUNC1_FULL BIT(4) -+#define AR40XX_VTU_FUNC1_PORT BIT(8, 4) -+#define AR40XX_VTU_FUNC1_PORT_S 8 -+#define AR40XX_VTU_FUNC1_VID BIT(16, 12) -+#define AR40XX_VTU_FUNC1_VID_S 16 -+#define AR40XX_VTU_FUNC1_BUSY BIT(31) -+ -+#define AR40XX_REG_FWD_CTRL0 0x620 -+#define AR40XX_FWD_CTRL0_CPU_PORT_EN BIT(10) -+#define AR40XX_FWD_CTRL0_MIRROR_PORT BITS(4, 4) -+#define AR40XX_FWD_CTRL0_MIRROR_PORT_S 4 -+ -+#define AR40XX_REG_FWD_CTRL1 0x624 -+#define AR40XX_FWD_CTRL1_UC_FLOOD BITS(0, 7) -+#define AR40XX_FWD_CTRL1_UC_FLOOD_S 0 -+#define AR40XX_FWD_CTRL1_MC_FLOOD BITS(8, 7) -+#define AR40XX_FWD_CTRL1_MC_FLOOD_S 8 -+#define AR40XX_FWD_CTRL1_BC_FLOOD BITS(16, 7) -+#define AR40XX_FWD_CTRL1_BC_FLOOD_S 16 -+#define AR40XX_FWD_CTRL1_IGMP BITS(24, 7) -+#define AR40XX_FWD_CTRL1_IGMP_S 24 -+ -+#define AR40XX_REG_PORT_LOOKUP(_i) (0x660 + (_i) * 0xc) -+#define AR40XX_PORT_LOOKUP_MEMBER BITS(0, 7) -+#define AR40XX_PORT_LOOKUP_IN_MODE BITS(8, 2) -+#define AR40XX_PORT_LOOKUP_IN_MODE_S 8 -+#define AR40XX_PORT_LOOKUP_STATE BITS(16, 3) -+#define AR40XX_PORT_LOOKUP_STATE_S 16 -+#define AR40XX_PORT_LOOKUP_LEARN BIT(20) -+#define AR40XX_PORT_LOOKUP_LOOPBACK BIT(21) -+#define AR40XX_PORT_LOOKUP_ING_MIRROR_EN BIT(25) -+ -+#define AR40XX_REG_ATU_FUNC 0x60c -+#define AR40XX_ATU_FUNC_OP BITS(0, 4) -+#define AR40XX_ATU_FUNC_OP_NOOP 0x0 -+#define AR40XX_ATU_FUNC_OP_FLUSH 0x1 -+#define AR40XX_ATU_FUNC_OP_LOAD 0x2 -+#define AR40XX_ATU_FUNC_OP_PURGE 0x3 -+#define AR40XX_ATU_FUNC_OP_FLUSH_LOCKED 0x4 -+#define AR40XX_ATU_FUNC_OP_FLUSH_UNICAST 0x5 -+#define AR40XX_ATU_FUNC_OP_GET_NEXT 0x6 -+#define AR40XX_ATU_FUNC_OP_SEARCH_MAC 0x7 -+#define AR40XX_ATU_FUNC_OP_CHANGE_TRUNK 0x8 -+#define AR40XX_ATU_FUNC_BUSY BIT(31) -+ -+#define AR40XX_REG_QM_DEBUG_ADDR 0x820 -+#define AR40XX_REG_QM_DEBUG_VALUE 0x824 -+#define AR40XX_REG_QM_PORT0_3_QNUM 0x1d -+#define AR40XX_REG_QM_PORT4_6_QNUM 0x1e -+ -+#define AR40XX_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8) -+#define AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16) -+ -+#define AR40XX_REG_PORT_FLOWCTRL_THRESH(_i) (0x9b0 + (_i) * 0x4) -+#define AR40XX_PORT0_FC_THRESH_ON_DFLT 0x60 -+#define AR40XX_PORT0_FC_THRESH_OFF_DFLT 0x90 -+ -+#define AR40XX_PHY_DEBUG_0 0 -+#define AR40XX_PHY_MANU_CTRL_EN BIT(12) -+ -+#define AR40XX_PHY_DEBUG_2 2 -+ -+#define AR40XX_PHY_SPEC_STATUS 0x11 -+#define AR40XX_PHY_SPEC_STATUS_LINK BIT(10) -+#define AR40XX_PHY_SPEC_STATUS_DUPLEX BIT(13) -+#define AR40XX_PHY_SPEC_STATUS_SPEED BITS(14, 2) -+ -+/* port forwarding state */ -+enum { -+ AR40XX_PORT_STATE_DISABLED = 0, -+ AR40XX_PORT_STATE_BLOCK = 1, -+ AR40XX_PORT_STATE_LISTEN = 2, -+ AR40XX_PORT_STATE_LEARN = 3, -+ AR40XX_PORT_STATE_FORWARD = 4 -+}; -+ -+/* ingress 802.1q mode */ -+enum { -+ AR40XX_IN_PORT_ONLY = 0, -+ AR40XX_IN_PORT_FALLBACK = 1, -+ AR40XX_IN_VLAN_ONLY = 2, -+ AR40XX_IN_SECURE = 3 -+}; -+ -+/* egress 802.1q mode */ -+enum { -+ AR40XX_OUT_KEEP = 0, -+ AR40XX_OUT_STRIP_VLAN = 1, -+ AR40XX_OUT_ADD_VLAN = 2 -+}; -+ -+/* port speed */ -+enum { -+ AR40XX_PORT_SPEED_10M = 0, -+ AR40XX_PORT_SPEED_100M = 1, -+ AR40XX_PORT_SPEED_1000M = 2, -+ AR40XX_PORT_SPEED_ERR = 3, -+}; -+ -+#define AR40XX_MIB_WORK_DELAY 2000 /* msecs */ -+ -+#define AR40XX_QM_WORK_DELAY 100 -+ -+#define AR40XX_MIB_FUNC_CAPTURE 0x3 -+ -+#define AR40XX_REG_PORT_STATS_START 0x1000 -+#define AR40XX_REG_PORT_STATS_LEN 0x100 -+ -+#define AR40XX_PORTS_ALL 0x3f -+ -+#define AR40XX_PSGMII_ID 5 -+#define AR40XX_PSGMII_CALB_NUM 100 -+#define AR40XX_MALIBU_PSGMII_MODE_CTRL 0x6d -+#define AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL 0x220c -+#define AR40XX_MALIBU_PHY_MMD7_DAC_CTRL 0x801a -+#define AR40XX_MALIBU_DAC_CTRL_MASK 0x380 -+#define AR40XX_MALIBU_DAC_CTRL_VALUE 0x280 -+#define AR40XX_MALIBU_PHY_RLP_CTRL 0x805a -+#define AR40XX_PSGMII_TX_DRIVER_1_CTRL 0xb -+#define AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP 0x8a -+#define AR40XX_MALIBU_PHY_LAST_ADDR 4 -+ -+static inline struct ar40xx_priv * -+swdev_to_ar40xx(struct switch_dev *swdev) -+{ -+ return container_of(swdev, struct ar40xx_priv, dev); -+} -+ -+#endif ---- /dev/null -+++ b/drivers/net/phy/mdio-ipq40xx.c -@@ -0,0 +1,198 @@ -+/* -+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MDIO_CTRL_0_REG 0x40 -+#define MDIO_CTRL_1_REG 0x44 -+#define MDIO_CTRL_2_REG 0x48 -+#define MDIO_CTRL_3_REG 0x4c -+#define MDIO_CTRL_4_REG 0x50 -+#define MDIO_CTRL_4_ACCESS_BUSY BIT(16) -+#define MDIO_CTRL_4_ACCESS_START BIT(8) -+#define MDIO_CTRL_4_ACCESS_CODE_READ 0 -+#define MDIO_CTRL_4_ACCESS_CODE_WRITE 1 -+#define CTRL_0_REG_DEFAULT_VALUE 0x150FF -+ -+#define IPQ40XX_MDIO_RETRY 1000 -+#define IPQ40XX_MDIO_DELAY 10 -+ -+struct ipq40xx_mdio_data { -+ struct mii_bus *mii_bus; -+ void __iomem *membase; -+ struct device *dev; -+}; -+ -+static int ipq40xx_mdio_wait_busy(struct ipq40xx_mdio_data *am) -+{ -+ int i; -+ -+ for (i = 0; i < IPQ40XX_MDIO_RETRY; i++) { -+ unsigned int busy; -+ -+ busy = readl(am->membase + MDIO_CTRL_4_REG) & -+ MDIO_CTRL_4_ACCESS_BUSY; -+ if (!busy) -+ return 0; -+ -+ /* BUSY might take to be cleard by 15~20 times of loop */ -+ udelay(IPQ40XX_MDIO_DELAY); -+ } -+ -+ dev_err(am->dev, "%s: MDIO operation timed out\n", am->mii_bus->name); -+ -+ return -ETIMEDOUT; -+} -+ -+static int ipq40xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum) -+{ -+ struct ipq40xx_mdio_data *am = bus->priv; -+ int value = 0; -+ unsigned int cmd = 0; -+ -+ lockdep_assert_held(&bus->mdio_lock); -+ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ /* issue the phy address and reg */ -+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG); -+ -+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_READ; -+ -+ /* issue read command */ -+ writel(cmd, am->membase + MDIO_CTRL_4_REG); -+ -+ /* Wait read complete */ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ /* Read data */ -+ value = readl(am->membase + MDIO_CTRL_3_REG); -+ -+ return value; -+} -+ -+static int ipq40xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum, -+ u16 value) -+{ -+ struct ipq40xx_mdio_data *am = bus->priv; -+ unsigned int cmd = 0; -+ -+ lockdep_assert_held(&bus->mdio_lock); -+ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ /* issue the phy address and reg */ -+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG); -+ -+ /* issue write data */ -+ writel(value, am->membase + MDIO_CTRL_2_REG); -+ -+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_WRITE; -+ /* issue write command */ -+ writel(cmd, am->membase + MDIO_CTRL_4_REG); -+ -+ /* Wait write complete */ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ return 0; -+} -+ -+static int ipq40xx_mdio_probe(struct platform_device *pdev) -+{ -+ struct ipq40xx_mdio_data *am; -+ struct resource *res; -+ int i; -+ -+ am = devm_kzalloc(&pdev->dev, sizeof(*am), GFP_KERNEL); -+ if (!am) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "no iomem resource found\n"); -+ return -ENXIO; -+ } -+ -+ am->membase = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(am->membase)) { -+ dev_err(&pdev->dev, "unable to ioremap registers\n"); -+ return PTR_ERR(am->membase); -+ } -+ -+ am->mii_bus = devm_mdiobus_alloc(&pdev->dev); -+ if (!am->mii_bus) -+ return -ENOMEM; -+ -+ writel(CTRL_0_REG_DEFAULT_VALUE, am->membase + MDIO_CTRL_0_REG); -+ -+ am->mii_bus->name = "ipq40xx_mdio"; -+ am->mii_bus->read = ipq40xx_mdio_read; -+ am->mii_bus->write = ipq40xx_mdio_write; -+ am->mii_bus->priv = am; -+ am->mii_bus->parent = &pdev->dev; -+ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev)); -+ -+ am->dev = &pdev->dev; -+ platform_set_drvdata(pdev, am); -+ -+ /* edma_axi_probe() use "am" drvdata. -+ * ipq40xx_mdio_probe() must be called first. -+ */ -+ return of_mdiobus_register(am->mii_bus, pdev->dev.of_node); -+} -+ -+static int ipq40xx_mdio_remove(struct platform_device *pdev) -+{ -+ struct ipq40xx_mdio_data *am = platform_get_drvdata(pdev); -+ -+ mdiobus_unregister(am->mii_bus); -+ return 0; -+} -+ -+static const struct of_device_id ipq40xx_mdio_dt_ids[] = { -+ { .compatible = "qcom,ipq4019-mdio" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, ipq40xx_mdio_dt_ids); -+ -+static struct platform_driver ipq40xx_mdio_driver = { -+ .probe = ipq40xx_mdio_probe, -+ .remove = ipq40xx_mdio_remove, -+ .driver = { -+ .name = "ipq40xx-mdio", -+ .of_match_table = ipq40xx_mdio_dt_ids, -+ }, -+}; -+ -+module_platform_driver(ipq40xx_mdio_driver); -+ -+#define DRV_VERSION "1.0" -+ -+MODULE_DESCRIPTION("IPQ40XX MDIO interface driver"); -+MODULE_AUTHOR("Qualcomm Atheros"); -+MODULE_VERSION(DRV_VERSION); -+MODULE_LICENSE("Dual BSD/GPL"); diff --git a/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch deleted file mode 100644 index b7e241058c..0000000000 --- a/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 01:10:33 +0100 -Subject: [PATCH] dts: ipq4019: add mdio node for ethernet - -This patch adds the mdio device-tree node. -This is where the switch is connected to, so it's needed -for the ethernet interfaces. - -Note: The driver isn't anywhere close to be upstream, -so the info might change. ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -567,6 +567,34 @@ - status = "disabled"; - }; - -+ mdio@90000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "qcom,ipq4019-mdio"; -+ reg = <0x90000 0x64>; -+ status = "disabled"; -+ -+ ethernet-phy@0 { -+ reg = <0>; -+ }; -+ -+ ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ ethernet-phy@2 { -+ reg = <2>; -+ }; -+ -+ ethernet-phy@3 { -+ reg = <3>; -+ }; -+ -+ ethernet-phy@4 { -+ reg = <4>; -+ }; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch deleted file mode 100644 index cc56a60ea3..0000000000 --- a/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 02:20:54 +0100 -Subject: [PATCH] dts: ipq4019: add PHY/switch nodes - -This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii" -nodes which are needed for the ar40xx.c driver to initialize the -switch. - -Signed-off-by: Christian Lamparter ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -595,6 +595,29 @@ - }; - }; - -+ ess-switch@c000000 { -+ compatible = "qcom,ess-switch"; -+ reg = <0xc000000 0x80000>; -+ switch_access_mode = "local bus"; -+ resets = <&gcc ESS_RESET>; -+ reset-names = "ess_rst"; -+ clocks = <&gcc GCC_ESS_CLK>; -+ clock-names = "ess_clk"; -+ switch_cpu_bmp = <0x1>; -+ switch_lan_bmp = <0x1e>; -+ switch_wan_bmp = <0x20>; -+ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */ -+ switch_initvlas = <0x7c 0x54>; -+ status = "disabled"; -+ }; -+ -+ ess-psgmii@98000 { -+ compatible = "qcom,ess-psgmii"; -+ reg = <0x98000 0x800>; -+ psgmii_access_mode = "local bus"; -+ status = "disabled"; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-4.14/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq40xx/patches-4.14/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch deleted file mode 100644 index 2ef42212ed..0000000000 --- a/target/linux/ipq40xx/patches-4.14/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001 -From: Rakesh Nair -Date: Wed, 20 Jul 2016 15:02:01 +0530 -Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in - netdev_ops - -Add callback support to get default vlan tag and register -receive flow steering filter. - -Used by IPQ4019 ess-edma driver. - -BUG=chrome-os-partner:33096 -TEST=none - -Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75 -Signed-off-by: Rakesh Nair -Reviewed-on: https://chromium-review.googlesource.com/362203 -Commit-Ready: Grant Grundler -Tested-by: Grant Grundler -Reviewed-by: Grant Grundler ---- - include/linux/netdevice.h | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -713,6 +713,16 @@ struct xps_map { - #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \ - - sizeof(struct xps_map)) / sizeof(u16)) - -+#ifdef CONFIG_RFS_ACCEL -+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev, -+ __be32 src, -+ __be32 dst, -+ __be16 sport, -+ __be16 dport, -+ u8 proto, -+ u16 rxq_index, -+ u32 action); -+#endif - /* - * This structure holds all XPS maps for device. Maps are indexed by CPU. - */ -@@ -1258,6 +1268,9 @@ struct net_device_ops { - const struct sk_buff *skb, - u16 rxq_index, - u32 flow_id); -+ int (*ndo_register_rfs_filter)(struct net_device *dev, -+ set_rfs_filter_callback_t set_filter); -+ int (*ndo_get_default_vlan_tag)(struct net_device *net); - #endif - int (*ndo_add_slave)(struct net_device *dev, - struct net_device *slave_dev); diff --git a/target/linux/ipq40xx/patches-4.14/706-ar40xx-abort-probe-on-missig-phy.patch b/target/linux/ipq40xx/patches-4.14/706-ar40xx-abort-probe-on-missig-phy.patch deleted file mode 100644 index 19474bff0d..0000000000 --- a/target/linux/ipq40xx/patches-4.14/706-ar40xx-abort-probe-on-missig-phy.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/ar40xx.c -+++ b/drivers/net/phy/ar40xx.c -@@ -2021,6 +2021,12 @@ static int ar40xx_probe(struct platform_ - /* register switch */ - swdev = &priv->dev; - -+ if (priv->mii_bus == NULL) { -+ dev_err(&pdev->dev, "Probe failed - Missing PHYs!\n"); -+ ret = -ENODEV; -+ goto err_missing_phy; -+ } -+ - swdev->alias = dev_name(&priv->mii_bus->dev); - - swdev->cpu_port = AR40XX_PORT_CPU; -@@ -2052,6 +2058,7 @@ err_unregister_switch: - unregister_switch(&priv->dev); - err_unregister_phy: - phy_driver_unregister(&ar40xx_phy_driver); -+err_missing_phy: - platform_set_drvdata(pdev, NULL); - return ret; - } diff --git a/target/linux/ipq40xx/patches-4.14/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq40xx/patches-4.14/710-net-add-qualcomm-essedma-ethernet-driver.patch deleted file mode 100644 index 1e47f2fe90..0000000000 --- a/target/linux/ipq40xx/patches-4.14/710-net-add-qualcomm-essedma-ethernet-driver.patch +++ /dev/null @@ -1,4578 +0,0 @@ -From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 19 Jan 2017 02:01:31 +0100 -Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver - -Signed-off-by: Christian Lamparter ---- - drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++ - drivers/net/ethernet/qualcomm/Makefile | 1 + - 2 files changed, 10 insertions(+) - ---- a/drivers/net/ethernet/qualcomm/Kconfig -+++ b/drivers/net/ethernet/qualcomm/Kconfig -@@ -61,4 +61,13 @@ config QCOM_EMAC - - source "drivers/net/ethernet/qualcomm/rmnet/Kconfig" - -+config ESSEDMA -+ tristate "Qualcomm Atheros ESS Edma support" -+ ---help--- -+ This driver supports ethernet edma adapter. -+ Say Y to build this driver. -+ -+ To compile this driver as a module, choose M here. The module -+ will be called essedma.ko. -+ - endif # NET_VENDOR_QUALCOMM ---- a/drivers/net/ethernet/qualcomm/Makefile -+++ b/drivers/net/ethernet/qualcomm/Makefile -@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o - qcauart-objs := qca_uart.o - - obj-y += emac/ -+obj-$(CONFIG_ESSEDMA) += essedma/ - - obj-$(CONFIG_RMNET) += rmnet/ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/Makefile -@@ -0,0 +1,9 @@ -+# -+## Makefile for the Qualcomm Atheros ethernet edma driver -+# -+ -+ -+obj-$(CONFIG_ESSEDMA) += essedma.o -+ -+essedma-objs := edma_axi.o edma.o edma_ethtool.o -+ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c -@@ -0,0 +1,2143 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include "ess_edma.h" -+#include "edma.h" -+ -+extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED]; -+bool edma_stp_rstp; -+u16 edma_ath_eth_type; -+ -+/* edma_skb_priority_offset() -+ * get edma skb priority -+ */ -+static unsigned int edma_skb_priority_offset(struct sk_buff *skb) -+{ -+ return (skb->priority >> 2) & 1; -+} -+ -+/* edma_alloc_tx_ring() -+ * Allocate Tx descriptors ring -+ */ -+static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_tx_desc_ring *etdr) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ /* Initialize ring */ -+ etdr->size = sizeof(struct edma_sw_desc) * etdr->count; -+ etdr->sw_next_to_fill = 0; -+ etdr->sw_next_to_clean = 0; -+ -+ /* Allocate SW descriptors */ -+ etdr->sw_desc = vzalloc(etdr->size); -+ if (!etdr->sw_desc) { -+ dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr); -+ return -ENOMEM; -+ } -+ -+ /* Allocate HW descriptors */ -+ etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma, -+ GFP_KERNEL); -+ if (!etdr->hw_desc) { -+ dev_err(&pdev->dev, "descriptor allocation for tx ring failed"); -+ vfree(etdr->sw_desc); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+/* edma_free_tx_ring() -+ * Free tx rings allocated by edma_alloc_tx_rings -+ */ -+static void edma_free_tx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_tx_desc_ring *etdr) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ if (likely(etdr->dma)) -+ dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc, -+ etdr->dma); -+ -+ vfree(etdr->sw_desc); -+ etdr->sw_desc = NULL; -+} -+ -+/* edma_alloc_rx_ring() -+ * allocate rx descriptor ring -+ */ -+static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_rfd_desc_ring *erxd) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ erxd->size = sizeof(struct edma_sw_desc) * erxd->count; -+ erxd->sw_next_to_fill = 0; -+ erxd->sw_next_to_clean = 0; -+ -+ /* Allocate SW descriptors */ -+ erxd->sw_desc = vzalloc(erxd->size); -+ if (!erxd->sw_desc) -+ return -ENOMEM; -+ -+ /* Alloc HW descriptors */ -+ erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma, -+ GFP_KERNEL); -+ if (!erxd->hw_desc) { -+ vfree(erxd->sw_desc); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+/* edma_free_rx_ring() -+ * Free rx ring allocated by alloc_rx_ring -+ */ -+static void edma_free_rx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_rfd_desc_ring *rxdr) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ if (likely(rxdr->dma)) -+ dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc, -+ rxdr->dma); -+ -+ vfree(rxdr->sw_desc); -+ rxdr->sw_desc = NULL; -+} -+ -+/* edma_configure_tx() -+ * Configure transmission control data -+ */ -+static void edma_configure_tx(struct edma_common_info *edma_cinfo) -+{ -+ u32 txq_ctrl_data; -+ -+ txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT); -+ txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN; -+ txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT); -+ edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data); -+} -+ -+ -+/* edma_configure_rx() -+ * configure reception control data -+ */ -+static void edma_configure_rx(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ u32 rss_type, rx_desc1, rxq_ctrl_data; -+ -+ /* Set RSS type */ -+ rss_type = hw->rss_type; -+ edma_write_reg(EDMA_REG_RSS_TYPE, rss_type); -+ -+ /* Set RFD burst number */ -+ rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT); -+ -+ /* Set RFD prefetch threshold */ -+ rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT); -+ -+ /* Set RFD in host ring low threshold to generte interrupt */ -+ rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT); -+ edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1); -+ -+ /* Set Rx FIFO threshold to start to DMA data to host */ -+ rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE; -+ -+ /* Set RX remove vlan bit */ -+ rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN; -+ -+ edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data); -+} -+ -+/* edma_alloc_rx_buf() -+ * does skb allocation for the received packets. -+ */ -+static int edma_alloc_rx_buf(struct edma_common_info -+ *edma_cinfo, -+ struct edma_rfd_desc_ring *erdr, -+ int cleaned_count, int queue_id) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_rx_free_desc *rx_desc; -+ struct edma_sw_desc *sw_desc; -+ struct sk_buff *skb; -+ unsigned int i; -+ u16 prod_idx, length; -+ u32 reg_data; -+ -+ if (cleaned_count > erdr->count) { -+ dev_err(&pdev->dev, "Incorrect cleaned_count %d", -+ cleaned_count); -+ return -1; -+ } -+ -+ i = erdr->sw_next_to_fill; -+ -+ while (cleaned_count) { -+ sw_desc = &erdr->sw_desc[i]; -+ length = edma_cinfo->rx_head_buffer_len; -+ -+ if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) { -+ skb = sw_desc->skb; -+ } else { -+ /* alloc skb */ -+ skb = netdev_alloc_skb(edma_netdev[0], length); -+ if (!skb) { -+ /* Better luck next round */ -+ break; -+ } -+ } -+ -+ if (edma_cinfo->page_mode) { -+ struct page *pg = alloc_page(GFP_ATOMIC); -+ -+ if (!pg) { -+ dev_kfree_skb_any(skb); -+ break; -+ } -+ -+ sw_desc->dma = dma_map_page(&pdev->dev, pg, 0, -+ edma_cinfo->rx_page_buffer_len, -+ DMA_FROM_DEVICE); -+ if (dma_mapping_error(&pdev->dev, -+ sw_desc->dma)) { -+ __free_page(pg); -+ dev_kfree_skb_any(skb); -+ break; -+ } -+ -+ skb_fill_page_desc(skb, 0, pg, 0, -+ edma_cinfo->rx_page_buffer_len); -+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG; -+ sw_desc->length = edma_cinfo->rx_page_buffer_len; -+ } else { -+ sw_desc->dma = dma_map_single(&pdev->dev, skb->data, -+ length, DMA_FROM_DEVICE); -+ if (dma_mapping_error(&pdev->dev, -+ sw_desc->dma)) { -+ dev_kfree_skb_any(skb); -+ break; -+ } -+ -+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD; -+ sw_desc->length = length; -+ } -+ -+ /* Update the buffer info */ -+ sw_desc->skb = skb; -+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]); -+ rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma); -+ if (++i == erdr->count) -+ i = 0; -+ cleaned_count--; -+ } -+ -+ erdr->sw_next_to_fill = i; -+ -+ if (i == 0) -+ prod_idx = erdr->count - 1; -+ else -+ prod_idx = i - 1; -+ -+ /* Update the producer index */ -+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), ®_data); -+ reg_data &= ~EDMA_RFD_PROD_IDX_BITS; -+ reg_data |= prod_idx; -+ edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data); -+ return cleaned_count; -+} -+ -+/* edma_init_desc() -+ * update descriptor ring size, buffer and producer/consumer index -+ */ -+static void edma_init_desc(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_rfd_desc_ring *rfd_ring; -+ struct edma_tx_desc_ring *etdr; -+ int i = 0, j = 0; -+ u32 data = 0; -+ u16 hw_cons_idx = 0; -+ -+ /* Set the base address of every TPD ring. */ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ etdr = edma_cinfo->tpd_ring[i]; -+ -+ /* Update descriptor ring base address */ -+ edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma); -+ edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data); -+ -+ /* Calculate hardware consumer index */ -+ hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff; -+ etdr->sw_next_to_fill = hw_cons_idx; -+ etdr->sw_next_to_clean = hw_cons_idx; -+ data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT); -+ data |= hw_cons_idx; -+ -+ /* update producer index */ -+ edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data); -+ -+ /* update SW consumer index register */ -+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx); -+ -+ /* Set TPD ring size */ -+ edma_write_reg(EDMA_REG_TPD_RING_SIZE, -+ edma_cinfo->tx_ring_count & -+ EDMA_TPD_RING_SIZE_MASK); -+ } -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ rfd_ring = edma_cinfo->rfd_ring[j]; -+ /* Update Receive Free descriptor ring base address */ -+ edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j), -+ (u32)(rfd_ring->dma)); -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ data = edma_cinfo->rx_head_buffer_len; -+ if (edma_cinfo->page_mode) -+ data = edma_cinfo->rx_page_buffer_len; -+ -+ data &= EDMA_RX_BUF_SIZE_MASK; -+ data <<= EDMA_RX_BUF_SIZE_SHIFT; -+ -+ /* Update RFD ring size and RX buffer size */ -+ data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK) -+ << EDMA_RFD_RING_SIZE_SHIFT; -+ -+ edma_write_reg(EDMA_REG_RX_DESC0, data); -+ -+ /* Disable TX FIFO low watermark and high watermark */ -+ edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0); -+ -+ /* Load all of base address above */ -+ edma_read_reg(EDMA_REG_TX_SRAM_PART, &data); -+ data |= 1 << EDMA_LOAD_PTR_SHIFT; -+ edma_write_reg(EDMA_REG_TX_SRAM_PART, data); -+} -+ -+/* edma_receive_checksum -+ * Api to check checksum on receive packets -+ */ -+static void edma_receive_checksum(struct edma_rx_return_desc *rd, -+ struct sk_buff *skb) -+{ -+ skb_checksum_none_assert(skb); -+ -+ /* check the RRD IP/L4 checksum bit to see if -+ * its set, which in turn indicates checksum -+ * failure. -+ */ -+ if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK) -+ return; -+ -+ skb->ip_summed = CHECKSUM_UNNECESSARY; -+} -+ -+/* edma_clean_rfd() -+ * clean up rx resourcers on error -+ */ -+static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index) -+{ -+ struct edma_rx_free_desc *rx_desc; -+ struct edma_sw_desc *sw_desc; -+ -+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]); -+ sw_desc = &erdr->sw_desc[index]; -+ if (sw_desc->skb) { -+ dev_kfree_skb_any(sw_desc->skb); -+ sw_desc->skb = NULL; -+ } -+ -+ memset(rx_desc, 0, sizeof(struct edma_rx_free_desc)); -+} -+ -+/* edma_rx_complete_fraglist() -+ * Complete Rx processing for fraglist skbs -+ */ -+static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd) -+{ -+ int i; -+ u32 priority; -+ u16 port_type; -+ u8 mac_addr[EDMA_ETH_HDR_LEN]; -+ -+ port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT) -+ & EDMA_RRD_PORT_TYPE_MASK; -+ /* if port type is 0x4, then only proceed with -+ * other stp/rstp calculation -+ */ -+ if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) { -+ u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00}; -+ -+ /* calculate the frame priority */ -+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT) -+ & EDMA_RRD_PRIORITY_MASK; -+ -+ for (i = 0; i < EDMA_ETH_HDR_LEN; i++) -+ mac_addr[i] = skb->data[i]; -+ -+ /* Check if destination mac addr is bpdu addr */ -+ if (!memcmp(mac_addr, bpdu_mac, 6)) { -+ /* destination mac address is BPDU -+ * destination mac address, then add -+ * atheros header to the packet. -+ */ -+ u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) | -+ (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) | -+ (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id; -+ skb_push(skb, 4); -+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN); -+ *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type); -+ *(uint16_t *)&skb->data[14] = htons(athr_hdr); -+ } -+ } -+} -+ -+/* -+ * edma_rx_complete_fraglist() -+ * Complete Rx processing for fraglist skbs -+ */ -+static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean, -+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_hw *hw = &edma_cinfo->hw; -+ struct sk_buff *skb_temp; -+ struct edma_sw_desc *sw_desc; -+ int i; -+ u16 size_remaining; -+ -+ skb->data_len = 0; -+ skb->tail += (hw->rx_head_buff_size - 16); -+ skb->len = skb->truesize = length; -+ size_remaining = length - (hw->rx_head_buff_size - 16); -+ -+ /* clean-up all related sw_descs */ -+ for (i = 1; i < num_rfds; i++) { -+ struct sk_buff *skb_prev; -+ sw_desc = &erdr->sw_desc[sw_next_to_clean]; -+ skb_temp = sw_desc->skb; -+ -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ -+ if (size_remaining < hw->rx_head_buff_size) -+ skb_put(skb_temp, size_remaining); -+ else -+ skb_put(skb_temp, hw->rx_head_buff_size); -+ -+ /* -+ * If we are processing the first rfd, we link -+ * skb->frag_list to the skb corresponding to the -+ * first RFD -+ */ -+ if (i == 1) -+ skb_shinfo(skb)->frag_list = skb_temp; -+ else -+ skb_prev->next = skb_temp; -+ skb_prev = skb_temp; -+ skb_temp->next = NULL; -+ -+ skb->data_len += skb_temp->len; -+ size_remaining -= skb_temp->len; -+ -+ /* Increment SW index */ -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ (*cleaned_count)++; -+ } -+ -+ return sw_next_to_clean; -+} -+ -+/* edma_rx_complete_paged() -+ * Complete Rx processing for paged skbs -+ */ -+static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean, -+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct sk_buff *skb_temp; -+ struct edma_sw_desc *sw_desc; -+ int i; -+ u16 size_remaining; -+ -+ skb_frag_t *frag = &skb_shinfo(skb)->frags[0]; -+ -+ /* Setup skbuff fields */ -+ skb->len = length; -+ -+ if (likely(num_rfds <= 1)) { -+ skb->data_len = length; -+ skb->truesize += edma_cinfo->rx_page_buffer_len; -+ skb_fill_page_desc(skb, 0, skb_frag_page(frag), -+ 16, length); -+ } else { -+ frag->size -= 16; -+ skb->data_len = frag->size; -+ skb->truesize += edma_cinfo->rx_page_buffer_len; -+ size_remaining = length - frag->size; -+ -+ skb_fill_page_desc(skb, 0, skb_frag_page(frag), -+ 16, frag->size); -+ -+ /* clean-up all related sw_descs */ -+ for (i = 1; i < num_rfds; i++) { -+ sw_desc = &erdr->sw_desc[sw_next_to_clean]; -+ skb_temp = sw_desc->skb; -+ frag = &skb_shinfo(skb_temp)->frags[0]; -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ -+ if (size_remaining < edma_cinfo->rx_page_buffer_len) -+ frag->size = size_remaining; -+ -+ skb_fill_page_desc(skb, i, skb_frag_page(frag), -+ 0, frag->size); -+ -+ skb_shinfo(skb_temp)->nr_frags = 0; -+ dev_kfree_skb_any(skb_temp); -+ -+ skb->data_len += frag->size; -+ skb->truesize += edma_cinfo->rx_page_buffer_len; -+ size_remaining -= frag->size; -+ -+ /* Increment SW index */ -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ (*cleaned_count)++; -+ } -+ } -+ -+ return sw_next_to_clean; -+} -+ -+/* -+ * edma_rx_complete() -+ * Main api called from the poll function to process rx packets. -+ */ -+static void edma_rx_complete(struct edma_common_info *edma_cinfo, -+ int *work_done, int work_to_do, int queue_id, -+ struct napi_struct *napi) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id]; -+ struct net_device *netdev; -+ struct edma_adapter *adapter; -+ struct edma_sw_desc *sw_desc; -+ struct sk_buff *skb; -+ struct edma_rx_return_desc *rd; -+ u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1, -+ sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0; -+ u32 data = 0; -+ u8 *vaddr; -+ int port_id, i, drop_count = 0; -+ u32 priority; -+ u16 count = erdr->count, rfd_avail; -+ u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3}; -+ -+ sw_next_to_clean = erdr->sw_next_to_clean; -+ -+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); -+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) & -+ EDMA_RFD_CONS_IDX_MASK; -+ -+ do { -+ while (sw_next_to_clean != hw_next_to_clean) { -+ if (!work_to_do) -+ break; -+ -+ sw_desc = &erdr->sw_desc[sw_next_to_clean]; -+ skb = sw_desc->skb; -+ -+ /* Unmap the allocated buffer */ -+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ else -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ -+ /* Get RRD */ -+ if (edma_cinfo->page_mode) { -+ vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0])); -+ memcpy((uint8_t *)&rrd[0], vaddr, 16); -+ rd = (struct edma_rx_return_desc *)rrd; -+ kunmap_atomic(vaddr); -+ } else { -+ rd = (struct edma_rx_return_desc *)skb->data; -+ } -+ -+ /* Check if RRD is valid */ -+ if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) { -+ edma_clean_rfd(erdr, sw_next_to_clean); -+ sw_next_to_clean = (sw_next_to_clean + 1) & -+ (erdr->count - 1); -+ cleaned_count++; -+ continue; -+ } -+ -+ /* Get the number of RFDs from RRD */ -+ num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK; -+ -+ /* Get Rx port ID from switch */ -+ port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK; -+ if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) { -+ dev_err(&pdev->dev, "Invalid RRD source port bit set"); -+ for (i = 0; i < num_rfds; i++) { -+ edma_clean_rfd(erdr, sw_next_to_clean); -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ cleaned_count++; -+ } -+ continue; -+ } -+ -+ /* check if we have a sink for the data we receive. -+ * If the interface isn't setup, we have to drop the -+ * incoming data for now. -+ */ -+ netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id]; -+ if (!netdev) { -+ edma_clean_rfd(erdr, sw_next_to_clean); -+ sw_next_to_clean = (sw_next_to_clean + 1) & -+ (erdr->count - 1); -+ cleaned_count++; -+ continue; -+ } -+ adapter = netdev_priv(netdev); -+ -+ /* This code is added to handle a usecase where high -+ * priority stream and a low priority stream are -+ * received simultaneously on DUT. The problem occurs -+ * if one of the Rx rings is full and the corresponding -+ * core is busy with other stuff. This causes ESS CPU -+ * port to backpressure all incoming traffic including -+ * high priority one. We monitor free descriptor count -+ * on each CPU and whenever it reaches threshold (< 80), -+ * we drop all low priority traffic and let only high -+ * priotiy traffic pass through. We can hence avoid -+ * ESS CPU port to send backpressure on high priroity -+ * stream. -+ */ -+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT) -+ & EDMA_RRD_PRIORITY_MASK; -+ if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) { -+ rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1); -+ if (rfd_avail < EDMA_RFD_AVAIL_THR) { -+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE; -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ adapter->stats.rx_dropped++; -+ cleaned_count++; -+ drop_count++; -+ if (drop_count == 3) { -+ work_to_do--; -+ (*work_done)++; -+ drop_count = 0; -+ } -+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ /* If buffer clean count reaches 16, we replenish HW buffers. */ -+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), -+ sw_next_to_clean); -+ cleaned_count = ret_count; -+ } -+ continue; -+ } -+ } -+ -+ work_to_do--; -+ (*work_done)++; -+ -+ /* Increment SW index */ -+ sw_next_to_clean = (sw_next_to_clean + 1) & -+ (erdr->count - 1); -+ -+ cleaned_count++; -+ -+ /* Get the packet size and allocate buffer */ -+ length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK; -+ -+ if (edma_cinfo->page_mode) { -+ /* paged skb */ -+ sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo); -+ if (!pskb_may_pull(skb, ETH_HLEN)) { -+ dev_kfree_skb_any(skb); -+ continue; -+ } -+ } else { -+ /* single or fraglist skb */ -+ -+ /* Addition of 16 bytes is required, as in the packet -+ * first 16 bytes are rrd descriptors, so actual data -+ * starts from an offset of 16. -+ */ -+ skb_reserve(skb, 16); -+ if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) { -+ skb_put(skb, length); -+ } else { -+ sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo); -+ } -+ } -+ -+ if (edma_stp_rstp) { -+ edma_rx_complete_stp_rstp(skb, port_id, rd); -+ } -+ -+ skb->protocol = eth_type_trans(skb, netdev); -+ -+ /* Record Rx queue for RFS/RPS and fill flow hash from HW */ -+ skb_record_rx_queue(skb, queue_to_rxid[queue_id]); -+ if (netdev->features & NETIF_F_RXHASH) { -+ hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT); -+ if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END)) -+ skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4); -+ } -+ -+#ifdef CONFIG_NF_FLOW_COOKIE -+ skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK; -+#endif -+ edma_receive_checksum(rd, skb); -+ -+ /* Process VLAN HW acceleration indication provided by HW */ -+ if (unlikely(adapter->default_vlan_tag != rd->rrd4)) { -+ vlan = rd->rrd4; -+ if (likely(rd->rrd7 & EDMA_RRD_CVLAN)) -+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan); -+ else if (rd->rrd1 & EDMA_RRD_SVLAN) -+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan); -+ } -+ -+ /* Update rx statistics */ -+ adapter->stats.rx_packets++; -+ adapter->stats.rx_bytes += length; -+ -+ /* Check if we reached refill threshold */ -+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), -+ sw_next_to_clean); -+ cleaned_count = ret_count; -+ } -+ -+ /* At this point skb should go to stack */ -+ napi_gro_receive(napi, skb); -+ } -+ -+ /* Check if we still have NAPI budget */ -+ if (!work_to_do) -+ break; -+ -+ /* Read index once again since we still have NAPI budget */ -+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); -+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) & -+ EDMA_RFD_CONS_IDX_MASK; -+ } while (hw_next_to_clean != sw_next_to_clean); -+ -+ erdr->sw_next_to_clean = sw_next_to_clean; -+ -+ /* Refill here in case refill threshold wasn't reached */ -+ if (likely(cleaned_count)) { -+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -+ if (ret_count) -+ dev_dbg(&pdev->dev, "Not all buffers was reallocated"); -+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), -+ erdr->sw_next_to_clean); -+ } -+} -+ -+/* edma_delete_rfs_filter() -+ * Remove RFS filter from switch -+ */ -+static int edma_delete_rfs_filter(struct edma_adapter *adapter, -+ struct edma_rfs_filter_node *filter_node) -+{ -+ int res = -1; -+ -+ struct flow_keys *keys = &filter_node->keys; -+ -+ if (likely(adapter->set_rfs_rule)) -+ res = (*adapter->set_rfs_rule)(adapter->netdev, -+ flow_get_u32_src(keys), flow_get_u32_dst(keys), -+ keys->ports.src, keys->ports.dst, -+ keys->basic.ip_proto, filter_node->rq_id, 0); -+ -+ return res; -+} -+ -+/* edma_add_rfs_filter() -+ * Add RFS filter to switch -+ */ -+static int edma_add_rfs_filter(struct edma_adapter *adapter, -+ struct flow_keys *keys, u16 rq, -+ struct edma_rfs_filter_node *filter_node) -+{ -+ int res = -1; -+ -+ struct flow_keys *dest_keys = &filter_node->keys; -+ -+ memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys)); -+/* -+ dest_keys->control = keys->control; -+ dest_keys->basic = keys->basic; -+ dest_keys->addrs = keys->addrs; -+ dest_keys->ports = keys->ports; -+ dest_keys.ip_proto = keys->ip_proto; -+*/ -+ /* Call callback registered by ESS driver */ -+ if (likely(adapter->set_rfs_rule)) -+ res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys), -+ flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst, -+ keys->basic.ip_proto, rq, 1); -+ -+ return res; -+} -+ -+/* edma_rfs_key_search() -+ * Look for existing RFS entry -+ */ -+static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h, -+ struct flow_keys *key) -+{ -+ struct edma_rfs_filter_node *p; -+ -+ hlist_for_each_entry(p, h, node) -+ if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) && -+ flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) && -+ p->keys.ports.src == key->ports.src && -+ p->keys.ports.dst == key->ports.dst && -+ p->keys.basic.ip_proto == key->basic.ip_proto) -+ return p; -+ return NULL; -+} -+ -+/* edma_initialise_rfs_flow_table() -+ * Initialise EDMA RFS flow table -+ */ -+static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter) -+{ -+ int i; -+ -+ spin_lock_init(&adapter->rfs.rfs_ftab_lock); -+ -+ /* Initialize EDMA flow hash table */ -+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) -+ INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]); -+ -+ adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES; -+ adapter->rfs.filter_available = adapter->rfs.max_num_filter; -+ adapter->rfs.hashtoclean = 0; -+ -+ /* Add timer to get periodic RFS updates from OS */ -+ init_timer(&adapter->rfs.expire_rfs); -+ adapter->rfs.expire_rfs.function = edma_flow_may_expire; -+ adapter->rfs.expire_rfs.data = (unsigned long)adapter; -+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4); -+} -+ -+/* edma_free_rfs_flow_table() -+ * Free EDMA RFS flow table -+ */ -+static void edma_free_rfs_flow_table(struct edma_adapter *adapter) -+{ -+ int i; -+ -+ /* Remove sync timer */ -+ del_timer_sync(&adapter->rfs.expire_rfs); -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ -+ /* Free EDMA RFS table entries */ -+ adapter->rfs.filter_available = 0; -+ -+ /* Clean-up EDMA flow hash table */ -+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) { -+ struct hlist_head *hhead; -+ struct hlist_node *tmp; -+ struct edma_rfs_filter_node *filter_node; -+ int res; -+ -+ hhead = &adapter->rfs.hlist_head[i]; -+ hlist_for_each_entry_safe(filter_node, tmp, hhead, node) { -+ res = edma_delete_rfs_filter(adapter, filter_node); -+ if (res < 0) -+ dev_warn(&adapter->netdev->dev, -+ "EDMA going down but RFS entry %d not allowed to be flushed by Switch", -+ filter_node->flow_id); -+ hlist_del(&filter_node->node); -+ kfree(filter_node); -+ } -+ } -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+} -+ -+/* edma_tx_unmap_and_free() -+ * clean TX buffer -+ */ -+static inline void edma_tx_unmap_and_free(struct platform_device *pdev, -+ struct edma_sw_desc *sw_desc) -+{ -+ struct sk_buff *skb = sw_desc->skb; -+ -+ if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) || -+ (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST))) -+ /* unmap_single for skb head area */ -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_TO_DEVICE); -+ else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG) -+ /* unmap page for paged fragments */ -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_TO_DEVICE); -+ -+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST)) -+ dev_kfree_skb_any(skb); -+ -+ sw_desc->flags = 0; -+} -+ -+/* edma_tx_complete() -+ * Used to clean tx queues and update hardware and consumer index -+ */ -+static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ struct edma_sw_desc *sw_desc; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i; -+ -+ u16 sw_next_to_clean = etdr->sw_next_to_clean; -+ u16 hw_next_to_clean; -+ u32 data = 0; -+ -+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data); -+ hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK; -+ -+ /* clean the buffer here */ -+ while (sw_next_to_clean != hw_next_to_clean) { -+ sw_desc = &etdr->sw_desc[sw_next_to_clean]; -+ edma_tx_unmap_and_free(pdev, sw_desc); -+ sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1); -+ } -+ -+ etdr->sw_next_to_clean = sw_next_to_clean; -+ -+ /* update the TPD consumer index register */ -+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean); -+ -+ /* Wake the queue if queue is stopped and netdev link is up */ -+ for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) { -+ if (netif_tx_queue_stopped(etdr->nq[i])) { -+ if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i])) -+ netif_tx_wake_queue(etdr->nq[i]); -+ } -+ } -+} -+ -+/* edma_get_tx_buffer() -+ * Get sw_desc corresponding to the TPD -+ */ -+static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo, -+ struct edma_tx_desc *tpd, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc]; -+} -+ -+/* edma_get_next_tpd() -+ * Return a TPD descriptor for transfer -+ */ -+static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo, -+ int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ u16 sw_next_to_fill = etdr->sw_next_to_fill; -+ struct edma_tx_desc *tpd_desc = -+ (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]); -+ -+ etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1); -+ -+ return tpd_desc; -+} -+ -+/* edma_tpd_available() -+ * Check number of free TPDs -+ */ -+static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo, -+ int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ -+ u16 sw_next_to_fill; -+ u16 sw_next_to_clean; -+ u16 count = 0; -+ -+ sw_next_to_clean = etdr->sw_next_to_clean; -+ sw_next_to_fill = etdr->sw_next_to_fill; -+ -+ if (likely(sw_next_to_clean <= sw_next_to_fill)) -+ count = etdr->count; -+ -+ return count + sw_next_to_clean - sw_next_to_fill - 1; -+} -+ -+/* edma_tx_queue_get() -+ * Get the starting number of the queue -+ */ -+static inline int edma_tx_queue_get(struct edma_adapter *adapter, -+ struct sk_buff *skb, int txq_id) -+{ -+ /* skb->priority is used as an index to skb priority table -+ * and based on packet priority, correspong queue is assigned. -+ */ -+ return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb); -+} -+ -+/* edma_tx_update_hw_idx() -+ * update the producer index for the ring transmitted -+ */ -+static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo, -+ struct sk_buff *skb, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ u32 tpd_idx_data; -+ -+ /* Read and update the producer index */ -+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data); -+ tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS; -+ tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK) -+ << EDMA_TPD_PROD_IDX_SHIFT; -+ -+ edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data); -+} -+ -+/* edma_rollback_tx() -+ * Function to retrieve tx resources in case of error -+ */ -+static void edma_rollback_tx(struct edma_adapter *adapter, -+ struct edma_tx_desc *start_tpd, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id]; -+ struct edma_sw_desc *sw_desc; -+ struct edma_tx_desc *tpd = NULL; -+ u16 start_index, index; -+ -+ start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc); -+ -+ index = start_index; -+ while (index != etdr->sw_next_to_fill) { -+ tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]); -+ sw_desc = &etdr->sw_desc[index]; -+ edma_tx_unmap_and_free(adapter->pdev, sw_desc); -+ memset(tpd, 0, sizeof(struct edma_tx_desc)); -+ if (++index == etdr->count) -+ index = 0; -+ } -+ etdr->sw_next_to_fill = start_index; -+} -+ -+/* edma_tx_map_and_fill() -+ * gets called from edma_xmit_frame -+ * -+ * This is where the dma of the buffer to be transmitted -+ * gets mapped -+ */ -+static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo, -+ struct edma_adapter *adapter, struct sk_buff *skb, int queue_id, -+ unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap, -+ bool packet_is_rstp, int nr_frags) -+{ -+ struct edma_sw_desc *sw_desc = NULL; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_tx_desc *tpd = NULL, *start_tpd = NULL; -+ struct sk_buff *iter_skb; -+ int i = 0; -+ u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0; -+ u16 buf_len, lso_desc_len = 0; -+ -+ /* It should either be a nr_frags skb or fraglist skb but not both */ -+ BUG_ON(nr_frags && skb_has_frag_list(skb)); -+ -+ if (skb_is_gso(skb)) { -+ /* TODO: What additional checks need to be performed here */ -+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) { -+ lso_word1 |= EDMA_TPD_IPV4_EN; -+ ip_hdr(skb)->check = 0; -+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr, -+ ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); -+ } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) { -+ lso_word1 |= EDMA_TPD_LSO_V2_EN; -+ ipv6_hdr(skb)->payload_len = 0; -+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, -+ &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); -+ } else -+ return -EINVAL; -+ -+ lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) | -+ (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT); -+ } else if (flags_transmit & EDMA_HW_CHECKSUM) { -+ u8 css, cso; -+ cso = skb_checksum_start_offset(skb); -+ css = cso + skb->csum_offset; -+ -+ word1 |= (EDMA_TPD_CUSTOM_CSUM_EN); -+ word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT; -+ word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT); -+ } -+ -+ if (skb->protocol == htons(ETH_P_PPP_SES)) -+ word1 |= EDMA_TPD_PPPOE_EN; -+ -+ if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) { -+ switch(skb->vlan_proto) { -+ case htons(ETH_P_8021Q): -+ word3 |= (1 << EDMA_TX_INS_CVLAN); -+ word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT; -+ break; -+ case htons(ETH_P_8021AD): -+ word1 |= (1 << EDMA_TX_INS_SVLAN); -+ svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT; -+ break; -+ default: -+ dev_err(&pdev->dev, "no ctag or stag present\n"); -+ goto vlan_tag_error; -+ } -+ } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) { -+ word3 |= (1 << EDMA_TX_INS_CVLAN); -+ word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT; -+ } -+ -+ if (packet_is_rstp) { -+ word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT; -+ word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT; -+ } else { -+ word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT; -+ } -+ -+ buf_len = skb_headlen(skb); -+ -+ if (lso_word1) { -+ if (lso_word1 & EDMA_TPD_LSO_V2_EN) { -+ -+ /* IPv6 LSOv2 descriptor */ -+ start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE; -+ -+ /* LSOv2 descriptor overrides addr field to pass length */ -+ tpd->addr = cpu_to_le16(skb->len); -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ } -+ -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ if (!start_tpd) -+ start_tpd = tpd; -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ -+ /* The last buffer info contain the skb address, -+ * so skb will be freed after unmap -+ */ -+ sw_desc->length = lso_desc_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; -+ -+ sw_desc->dma = dma_map_single(&adapter->pdev->dev, -+ skb->data, buf_len, DMA_TO_DEVICE); -+ if (dma_mapping_error(&pdev->dev, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ -+ /* The last buffer info contain the skb address, -+ * so it will be freed after unmap -+ */ -+ sw_desc->length = lso_desc_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; -+ -+ buf_len = 0; -+ } -+ -+ if (likely(buf_len)) { -+ -+ /* TODO Do not dequeue descriptor if there is a potential error */ -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ -+ if (!start_tpd) -+ start_tpd = tpd; -+ -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ -+ /* The last buffer info contain the skb address, -+ * so it will be free after unmap -+ */ -+ sw_desc->length = buf_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; -+ sw_desc->dma = dma_map_single(&adapter->pdev->dev, -+ skb->data, buf_len, DMA_TO_DEVICE); -+ if (dma_mapping_error(&pdev->dev, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ } -+ -+ /* Walk through all paged fragments */ -+ while (nr_frags--) { -+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; -+ buf_len = skb_frag_size(frag); -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ sw_desc->length = buf_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG; -+ -+ sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(NULL, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ i++; -+ } -+ -+ /* Walk through all fraglist skbs */ -+ skb_walk_frags(skb, iter_skb) { -+ buf_len = iter_skb->len; -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ sw_desc->length = buf_len; -+ sw_desc->dma = dma_map_single(&adapter->pdev->dev, -+ iter_skb->data, buf_len, DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(NULL, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST; -+ } -+ -+ if (tpd) -+ tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT; -+ -+ sw_desc->skb = skb; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST; -+ -+ return 0; -+ -+dma_error: -+ edma_rollback_tx(adapter, start_tpd, queue_id); -+ dev_err(&pdev->dev, "TX DMA map failed\n"); -+vlan_tag_error: -+ return -ENOMEM; -+} -+ -+/* edma_check_link() -+ * check Link status -+ */ -+static int edma_check_link(struct edma_adapter *adapter) -+{ -+ struct phy_device *phydev = adapter->phydev; -+ -+ if (!(adapter->poll_required)) -+ return __EDMA_LINKUP; -+ -+ if (phydev->link) -+ return __EDMA_LINKUP; -+ -+ return __EDMA_LINKDOWN; -+} -+ -+/* edma_adjust_link() -+ * check for edma link status -+ */ -+void edma_adjust_link(struct net_device *netdev) -+{ -+ int status; -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct phy_device *phydev = adapter->phydev; -+ -+ if (!test_bit(__EDMA_UP, &adapter->state_flags)) -+ return; -+ -+ status = edma_check_link(adapter); -+ -+ if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) { -+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed); -+ adapter->link_state = __EDMA_LINKUP; -+ netif_carrier_on(netdev); -+ if (netif_running(netdev)) -+ netif_tx_wake_all_queues(netdev); -+ } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) { -+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is down\n", netdev->name); -+ adapter->link_state = __EDMA_LINKDOWN; -+ netif_carrier_off(netdev); -+ netif_tx_stop_all_queues(netdev); -+ } -+} -+ -+/* edma_get_stats() -+ * Statistics api used to retreive the tx/rx statistics -+ */ -+struct net_device_stats *edma_get_stats(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ return &adapter->stats; -+} -+ -+/* edma_xmit() -+ * Main api to be called by the core for packet transmission -+ */ -+netdev_tx_t edma_xmit(struct sk_buff *skb, -+ struct net_device *net_dev) -+{ -+ struct edma_adapter *adapter = netdev_priv(net_dev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ struct edma_tx_desc_ring *etdr; -+ u16 from_cpu, dp_bitmap, txq_id; -+ int ret, nr_frags = 0, num_tpds_needed = 1, queue_id; -+ unsigned int flags_transmit = 0; -+ bool packet_is_rstp = false; -+ struct netdev_queue *nq = NULL; -+ -+ if (skb_shinfo(skb)->nr_frags) { -+ nr_frags = skb_shinfo(skb)->nr_frags; -+ num_tpds_needed += nr_frags; -+ } else if (skb_has_frag_list(skb)) { -+ struct sk_buff *iter_skb; -+ -+ skb_walk_frags(skb, iter_skb) -+ num_tpds_needed++; -+ } -+ -+ if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) { -+ dev_err(&net_dev->dev, -+ "skb received with fragments %d which is more than %lu", -+ num_tpds_needed, EDMA_MAX_SKB_FRAGS); -+ dev_kfree_skb_any(skb); -+ adapter->stats.tx_errors++; -+ return NETDEV_TX_OK; -+ } -+ -+ if (edma_stp_rstp) { -+ u16 ath_hdr, ath_eth_type; -+ u8 mac_addr[EDMA_ETH_HDR_LEN]; -+ ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]); -+ if (ath_eth_type == edma_ath_eth_type) { -+ packet_is_rstp = true; -+ ath_hdr = htons(*(uint16_t *)&skb->data[14]); -+ dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK; -+ from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT; -+ memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN); -+ -+ skb_pull(skb, 4); -+ -+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN); -+ } -+ } -+ -+ /* this will be one of the 4 TX queues exposed to linux kernel */ -+ txq_id = skb_get_queue_mapping(skb); -+ queue_id = edma_tx_queue_get(adapter, skb, txq_id); -+ etdr = edma_cinfo->tpd_ring[queue_id]; -+ nq = netdev_get_tx_queue(net_dev, txq_id); -+ -+ local_bh_disable(); -+ /* Tx is not handled in bottom half context. Hence, we need to protect -+ * Tx from tasks and bottom half -+ */ -+ -+ if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) { -+ /* not enough descriptor, just stop queue */ -+ netif_tx_stop_queue(nq); -+ local_bh_enable(); -+ dev_dbg(&net_dev->dev, "Not enough descriptors available"); -+ edma_cinfo->edma_ethstats.tx_desc_error++; -+ return NETDEV_TX_BUSY; -+ } -+ -+ /* Check and mark VLAN tag offload */ -+ if (skb_vlan_tag_present(skb)) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG; -+ else if (adapter->default_vlan_tag) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG; -+ -+ /* Check and mark checksum offload */ -+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) -+ flags_transmit |= EDMA_HW_CHECKSUM; -+ -+ /* Map and fill descriptor for Tx */ -+ ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id, -+ flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags); -+ if (ret) { -+ dev_kfree_skb_any(skb); -+ adapter->stats.tx_errors++; -+ goto netdev_okay; -+ } -+ -+ /* Update SW producer index */ -+ edma_tx_update_hw_idx(edma_cinfo, skb, queue_id); -+ -+ /* update tx statistics */ -+ adapter->stats.tx_packets++; -+ adapter->stats.tx_bytes += skb->len; -+ -+netdev_okay: -+ local_bh_enable(); -+ return NETDEV_TX_OK; -+} -+ -+/* -+ * edma_flow_may_expire() -+ * Timer function called periodically to delete the node -+ */ -+void edma_flow_may_expire(unsigned long data) -+{ -+ struct edma_adapter *adapter = (struct edma_adapter *)data; -+ int j; -+ -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) { -+ struct hlist_head *hhead; -+ struct hlist_node *tmp; -+ struct edma_rfs_filter_node *n; -+ bool res; -+ -+ hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++]; -+ hlist_for_each_entry_safe(n, tmp, hhead, node) { -+ res = rps_may_expire_flow(adapter->netdev, n->rq_id, -+ n->flow_id, n->filter_id); -+ if (res) { -+ int ret; -+ ret = edma_delete_rfs_filter(adapter, n); -+ if (ret < 0) -+ dev_dbg(&adapter->netdev->dev, -+ "RFS entry %d not allowed to be flushed by Switch", -+ n->flow_id); -+ else { -+ hlist_del(&n->node); -+ kfree(n); -+ adapter->rfs.filter_available++; -+ } -+ } -+ } -+ } -+ -+ adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1); -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4); -+} -+ -+/* edma_rx_flow_steer() -+ * Called by core to to steer the flow to CPU -+ */ -+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, -+ u16 rxq, u32 flow_id) -+{ -+ struct flow_keys keys; -+ struct edma_rfs_filter_node *filter_node; -+ struct edma_adapter *adapter = netdev_priv(dev); -+ u16 hash_tblid; -+ int res; -+ -+ if (skb->protocol == htons(ETH_P_IPV6)) { -+ dev_err(&adapter->pdev->dev, "IPv6 not supported\n"); -+ res = -EINVAL; -+ goto no_protocol_err; -+ } -+ -+ /* Dissect flow parameters -+ * We only support IPv4 + TCP/UDP -+ */ -+ res = skb_flow_dissect_flow_keys(skb, &keys, 0); -+ if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) { -+ res = -EPROTONOSUPPORT; -+ goto no_protocol_err; -+ } -+ -+ /* Check if table entry exists */ -+ hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK; -+ -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys); -+ -+ if (filter_node) { -+ if (rxq == filter_node->rq_id) { -+ res = -EEXIST; -+ goto out; -+ } else { -+ res = edma_delete_rfs_filter(adapter, filter_node); -+ if (res < 0) -+ dev_warn(&adapter->netdev->dev, -+ "Cannot steer flow %d to different queue", -+ filter_node->flow_id); -+ else { -+ adapter->rfs.filter_available++; -+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node); -+ if (res < 0) { -+ dev_warn(&adapter->netdev->dev, -+ "Cannot steer flow %d to different queue", -+ filter_node->flow_id); -+ } else { -+ adapter->rfs.filter_available--; -+ filter_node->rq_id = rxq; -+ filter_node->filter_id = res; -+ } -+ } -+ } -+ } else { -+ if (adapter->rfs.filter_available == 0) { -+ res = -EBUSY; -+ goto out; -+ } -+ -+ filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC); -+ if (!filter_node) { -+ res = -ENOMEM; -+ goto out; -+ } -+ -+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node); -+ if (res < 0) { -+ kfree(filter_node); -+ goto out; -+ } -+ -+ adapter->rfs.filter_available--; -+ filter_node->rq_id = rxq; -+ filter_node->filter_id = res; -+ filter_node->flow_id = flow_id; -+ filter_node->keys = keys; -+ INIT_HLIST_NODE(&filter_node->node); -+ hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]); -+ } -+ -+out: -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+no_protocol_err: -+ return res; -+} -+ -+/* edma_register_rfs_filter() -+ * Add RFS filter callback -+ */ -+int edma_register_rfs_filter(struct net_device *netdev, -+ set_rfs_filter_callback_t set_filter) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ -+ if (adapter->set_rfs_rule) { -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+ return -1; -+ } -+ -+ adapter->set_rfs_rule = set_filter; -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+ -+ return 0; -+} -+ -+/* edma_alloc_tx_rings() -+ * Allocate rx rings -+ */ -+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, err = 0; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]); -+ if (err) { -+ dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i); -+ return err; -+ } -+ } -+ -+ return 0; -+} -+ -+/* edma_free_tx_rings() -+ * Free tx rings -+ */ -+void edma_free_tx_rings(struct edma_common_info *edma_cinfo) -+{ -+ int i; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) -+ edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]); -+} -+ -+/* edma_free_tx_resources() -+ * Free buffers associated with tx rings -+ */ -+void edma_free_tx_resources(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_tx_desc_ring *etdr; -+ struct edma_sw_desc *sw_desc; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, j; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ etdr = edma_cinfo->tpd_ring[i]; -+ for (j = 0; j < EDMA_TX_RING_SIZE; j++) { -+ sw_desc = &etdr->sw_desc[j]; -+ if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD | -+ EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST)) -+ edma_tx_unmap_and_free(pdev, sw_desc); -+ } -+ } -+} -+ -+/* edma_alloc_rx_rings() -+ * Allocate rx rings -+ */ -+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, j, err = 0; -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]); -+ if (err) { -+ dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i); -+ return err; -+ } -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ return 0; -+} -+ -+/* edma_free_rx_rings() -+ * free rx rings -+ */ -+void edma_free_rx_rings(struct edma_common_info *edma_cinfo) -+{ -+ int i, j; -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]); -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+} -+ -+/* edma_free_queues() -+ * Free the queues allocaated -+ */ -+void edma_free_queues(struct edma_common_info *edma_cinfo) -+{ -+ int i , j; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ if (edma_cinfo->tpd_ring[i]) -+ kfree(edma_cinfo->tpd_ring[i]); -+ edma_cinfo->tpd_ring[i] = NULL; -+ } -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ if (edma_cinfo->rfd_ring[j]) -+ kfree(edma_cinfo->rfd_ring[j]); -+ edma_cinfo->rfd_ring[j] = NULL; -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ edma_cinfo->num_rx_queues = 0; -+ edma_cinfo->num_tx_queues = 0; -+ -+ return; -+} -+ -+/* edma_free_rx_resources() -+ * Free buffers associated with tx rings -+ */ -+void edma_free_rx_resources(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_rfd_desc_ring *erdr; -+ struct edma_sw_desc *sw_desc; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, j, k; -+ -+ for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) { -+ erdr = edma_cinfo->rfd_ring[k]; -+ for (j = 0; j < EDMA_RX_RING_SIZE; j++) { -+ sw_desc = &erdr->sw_desc[j]; -+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) { -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ edma_clean_rfd(erdr, j); -+ } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) { -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ edma_clean_rfd(erdr, j); -+ } -+ } -+ k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ -+ } -+} -+ -+/* edma_alloc_queues_tx() -+ * Allocate memory for all rings -+ */ -+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo) -+{ -+ int i; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ struct edma_tx_desc_ring *etdr; -+ etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL); -+ if (!etdr) -+ goto err; -+ etdr->count = edma_cinfo->tx_ring_count; -+ edma_cinfo->tpd_ring[i] = etdr; -+ } -+ -+ return 0; -+err: -+ edma_free_queues(edma_cinfo); -+ return -1; -+} -+ -+/* edma_alloc_queues_rx() -+ * Allocate memory for all rings -+ */ -+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo) -+{ -+ int i, j; -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ struct edma_rfd_desc_ring *rfd_ring; -+ rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring), -+ GFP_KERNEL); -+ if (!rfd_ring) -+ goto err; -+ rfd_ring->count = edma_cinfo->rx_ring_count; -+ edma_cinfo->rfd_ring[j] = rfd_ring; -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ return 0; -+err: -+ edma_free_queues(edma_cinfo); -+ return -1; -+} -+ -+/* edma_clear_irq_status() -+ * Clear interrupt status -+ */ -+void edma_clear_irq_status() -+{ -+ edma_write_reg(EDMA_REG_RX_ISR, 0xff); -+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); -+ edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff); -+ edma_write_reg(EDMA_REG_WOL_ISR, 0x1); -+}; -+ -+/* edma_configure() -+ * Configure skb, edma interrupts and control register. -+ */ -+int edma_configure(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ u32 intr_modrt_data; -+ u32 intr_ctrl_data = 0; -+ int i, j, ret_count; -+ -+ edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data); -+ intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT); -+ intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT; -+ edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data); -+ -+ edma_clear_irq_status(); -+ -+ /* Clear any WOL status */ -+ edma_write_reg(EDMA_REG_WOL_CTRL, 0); -+ intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT); -+ intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT); -+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data); -+ edma_configure_tx(edma_cinfo); -+ edma_configure_rx(edma_cinfo); -+ -+ /* Allocate the RX buffer */ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j]; -+ ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j); -+ if (ret_count) { -+ dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n"); -+ } -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ /* Configure descriptor Ring */ -+ edma_init_desc(edma_cinfo); -+ return 0; -+} -+ -+/* edma_irq_enable() -+ * Enable default interrupt generation settings -+ */ -+void edma_irq_enable(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ int i, j; -+ -+ edma_write_reg(EDMA_REG_RX_ISR, 0xff); -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask); -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask); -+} -+ -+/* edma_irq_disable() -+ * Disable Interrupt -+ */ -+void edma_irq_disable(struct edma_common_info *edma_cinfo) -+{ -+ int i; -+ -+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0); -+ -+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0); -+ edma_write_reg(EDMA_REG_MISC_IMR, 0); -+ edma_write_reg(EDMA_REG_WOL_IMR, 0); -+} -+ -+/* edma_free_irqs() -+ * Free All IRQs -+ */ -+void edma_free_irqs(struct edma_adapter *adapter) -+{ -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ int i, j; -+ int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2); -+ -+ for (i = 0; i < CONFIG_NR_CPUS; i++) { -+ for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++) -+ free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]); -+ -+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++) -+ free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]); -+ } -+} -+ -+/* edma_enable_rx_ctrl() -+ * Enable RX queue control -+ */ -+void edma_enable_rx_ctrl(struct edma_hw *hw) -+{ -+ u32 data; -+ -+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data); -+ data |= EDMA_RXQ_CTRL_EN; -+ edma_write_reg(EDMA_REG_RXQ_CTRL, data); -+} -+ -+ -+/* edma_enable_tx_ctrl() -+ * Enable TX queue control -+ */ -+void edma_enable_tx_ctrl(struct edma_hw *hw) -+{ -+ u32 data; -+ -+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data); -+ data |= EDMA_TXQ_CTRL_TXQ_EN; -+ edma_write_reg(EDMA_REG_TXQ_CTRL, data); -+} -+ -+/* edma_stop_rx_tx() -+ * Disable RX/TQ Queue control -+ */ -+void edma_stop_rx_tx(struct edma_hw *hw) -+{ -+ u32 data; -+ -+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data); -+ data &= ~EDMA_RXQ_CTRL_EN; -+ edma_write_reg(EDMA_REG_RXQ_CTRL, data); -+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data); -+ data &= ~EDMA_TXQ_CTRL_TXQ_EN; -+ edma_write_reg(EDMA_REG_TXQ_CTRL, data); -+} -+ -+/* edma_reset() -+ * Reset the EDMA -+ */ -+int edma_reset(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ -+ edma_irq_disable(edma_cinfo); -+ -+ edma_clear_irq_status(); -+ -+ edma_stop_rx_tx(hw); -+ -+ return 0; -+} -+ -+/* edma_fill_netdev() -+ * Fill netdev for each etdr -+ */ -+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id, -+ int dev, int txq_id) -+{ -+ struct edma_tx_desc_ring *etdr; -+ int i = 0; -+ -+ etdr = edma_cinfo->tpd_ring[queue_id]; -+ -+ while (etdr->netdev[i]) -+ i++; -+ -+ if (i >= EDMA_MAX_NETDEV_PER_QUEUE) -+ return -1; -+ -+ /* Populate the netdev associated with the tpd ring */ -+ etdr->netdev[i] = edma_netdev[dev]; -+ etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id); -+ -+ return 0; -+} -+ -+/* edma_set_mac() -+ * Change the Ethernet Address of the NIC -+ */ -+int edma_set_mac_addr(struct net_device *netdev, void *p) -+{ -+ struct sockaddr *addr = p; -+ -+ if (!is_valid_ether_addr(addr->sa_data)) -+ return -EINVAL; -+ -+ if (netif_running(netdev)) -+ return -EBUSY; -+ -+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); -+ return 0; -+} -+ -+/* edma_set_stp_rstp() -+ * set stp/rstp -+ */ -+void edma_set_stp_rstp(bool rstp) -+{ -+ edma_stp_rstp = rstp; -+} -+ -+/* edma_assign_ath_hdr_type() -+ * assign atheros header eth type -+ */ -+void edma_assign_ath_hdr_type(int eth_type) -+{ -+ edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK; -+} -+ -+/* edma_get_default_vlan_tag() -+ * Used by other modules to get the default vlan tag -+ */ -+int edma_get_default_vlan_tag(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ if (adapter->default_vlan_tag) -+ return adapter->default_vlan_tag; -+ -+ return 0; -+} -+ -+/* edma_open() -+ * gets called when netdevice is up, start the queue. -+ */ -+int edma_open(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct platform_device *pdev = adapter->edma_cinfo->pdev; -+ -+ netif_tx_start_all_queues(netdev); -+ edma_initialise_rfs_flow_table(adapter); -+ set_bit(__EDMA_UP, &adapter->state_flags); -+ -+ /* if Link polling is enabled, in our case enabled for WAN, then -+ * do a phy start, else always set link as UP -+ */ -+ if (adapter->poll_required) { -+ if (!IS_ERR(adapter->phydev)) { -+ phy_start(adapter->phydev); -+ phy_start_aneg(adapter->phydev); -+ adapter->link_state = __EDMA_LINKDOWN; -+ } else { -+ dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n"); -+ } -+ } else { -+ adapter->link_state = __EDMA_LINKUP; -+ netif_carrier_on(netdev); -+ } -+ -+ return 0; -+} -+ -+ -+/* edma_close() -+ * gets called when netdevice is down, stops the queue. -+ */ -+int edma_close(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ edma_free_rfs_flow_table(adapter); -+ netif_carrier_off(netdev); -+ netif_tx_stop_all_queues(netdev); -+ -+ if (adapter->poll_required) { -+ if (!IS_ERR(adapter->phydev)) -+ phy_stop(adapter->phydev); -+ } -+ -+ adapter->link_state = __EDMA_LINKDOWN; -+ -+ /* Set GMAC state to UP before link state is checked -+ */ -+ clear_bit(__EDMA_UP, &adapter->state_flags); -+ -+ return 0; -+} -+ -+/* edma_poll -+ * polling function that gets called when the napi gets scheduled. -+ * -+ * Main sequence of task performed in this api -+ * is clear irq status -> clear_tx_irq -> clean_rx_irq-> -+ * enable interrupts. -+ */ -+int edma_poll(struct napi_struct *napi, int budget) -+{ -+ struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi, -+ struct edma_per_cpu_queues_info, napi); -+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo; -+ u32 reg_data; -+ u32 shadow_rx_status, shadow_tx_status; -+ int queue_id; -+ int i, work_done = 0; -+ -+ /* Store the Rx/Tx status by ANDing it with -+ * appropriate CPU RX?TX mask -+ */ -+ edma_read_reg(EDMA_REG_RX_ISR, ®_data); -+ edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask; -+ shadow_rx_status = edma_percpu_info->rx_status; -+ edma_read_reg(EDMA_REG_TX_ISR, ®_data); -+ edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask; -+ shadow_tx_status = edma_percpu_info->tx_status; -+ -+ /* Every core will have a start, which will be computed -+ * in probe and stored in edma_percpu_info->tx_start variable. -+ * We will shift the status bit by tx_start to obtain -+ * status bits for the core on which the current processing -+ * is happening. Since, there are 4 tx queues per core, -+ * we will run the loop till we get the correct queue to clear. -+ */ -+ while (edma_percpu_info->tx_status) { -+ queue_id = ffs(edma_percpu_info->tx_status) - 1; -+ edma_tx_complete(edma_cinfo, queue_id); -+ edma_percpu_info->tx_status &= ~(1 << queue_id); -+ } -+ -+ /* Every core will have a start, which will be computed -+ * in probe and stored in edma_percpu_info->tx_start variable. -+ * We will shift the status bit by tx_start to obtain -+ * status bits for the core on which the current processing -+ * is happening. Since, there are 4 tx queues per core, we -+ * will run the loop till we get the correct queue to clear. -+ */ -+ while (edma_percpu_info->rx_status) { -+ queue_id = ffs(edma_percpu_info->rx_status) - 1; -+ edma_rx_complete(edma_cinfo, &work_done, -+ budget, queue_id, napi); -+ -+ if (likely(work_done < budget)) -+ edma_percpu_info->rx_status &= ~(1 << queue_id); -+ else -+ break; -+ } -+ -+ /* Clear the status register, to avoid the interrupts to -+ * reoccur.This clearing of interrupt status register is -+ * done here as writing to status register only takes place -+ * once the producer/consumer index has been updated to -+ * reflect that the packet transmission/reception went fine. -+ */ -+ edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status); -+ edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status); -+ -+ /* If budget not fully consumed, exit the polling mode */ -+ if (likely(work_done < budget)) { -+ napi_complete(napi); -+ -+ /* re-enable the interrupts */ -+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++) -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1); -+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1); -+ } -+ -+ return work_done; -+} -+ -+/* edma interrupt() -+ * interrupt handler -+ */ -+irqreturn_t edma_interrupt(int irq, void *dev) -+{ -+ struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev; -+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo; -+ int i; -+ -+ /* Unmask the TX/RX interrupt register */ -+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++) -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0); -+ -+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0); -+ -+ napi_schedule(&edma_percpu_info->napi); -+ -+ return IRQ_HANDLED; -+} ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h -@@ -0,0 +1,446 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#ifndef _EDMA_H_ -+#define _EDMA_H_ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "ess_edma.h" -+ -+#define EDMA_CPU_CORES_SUPPORTED 4 -+#define EDMA_MAX_PORTID_SUPPORTED 5 -+#define EDMA_MAX_VLAN_SUPPORTED EDMA_MAX_PORTID_SUPPORTED -+#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1) -+#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f /* 0001_1111 = 0x1f */ -+#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */ -+ -+#define EDMA_MAX_RECEIVE_QUEUE 8 -+#define EDMA_MAX_TRANSMIT_QUEUE 16 -+ -+/* WAN/LAN adapter number */ -+#define EDMA_WAN 0 -+#define EDMA_LAN 1 -+ -+/* VLAN tag */ -+#define EDMA_LAN_DEFAULT_VLAN 1 -+#define EDMA_WAN_DEFAULT_VLAN 2 -+ -+#define EDMA_DEFAULT_GROUP1_VLAN 1 -+#define EDMA_DEFAULT_GROUP2_VLAN 2 -+#define EDMA_DEFAULT_GROUP3_VLAN 3 -+#define EDMA_DEFAULT_GROUP4_VLAN 4 -+#define EDMA_DEFAULT_GROUP5_VLAN 5 -+ -+/* Queues exposed to linux kernel */ -+#define EDMA_NETDEV_TX_QUEUE 4 -+#define EDMA_NETDEV_RX_QUEUE 4 -+ -+/* Number of queues per core */ -+#define EDMA_NUM_TXQ_PER_CORE 4 -+#define EDMA_NUM_RXQ_PER_CORE 2 -+ -+#define EDMA_TPD_EOP_SHIFT 31 -+ -+#define EDMA_PORT_ID_SHIFT 12 -+#define EDMA_PORT_ID_MASK 0x7 -+ -+/* tpd word 3 bit 18-28 */ -+#define EDMA_TPD_PORT_BITMAP_SHIFT 18 -+ -+#define EDMA_TPD_FROM_CPU_SHIFT 25 -+ -+#define EDMA_FROM_CPU_MASK 0x80 -+#define EDMA_SKB_PRIORITY_MASK 0x38 -+ -+/* TX/RX descriptor ring count */ -+/* should be a power of 2 */ -+#define EDMA_RX_RING_SIZE 128 -+#define EDMA_TX_RING_SIZE 128 -+ -+/* Flags used in paged/non paged mode */ -+#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256 -+#define EDMA_RX_HEAD_BUFF_SIZE 1540 -+ -+/* MAX frame size supported by switch */ -+#define EDMA_MAX_JUMBO_FRAME_SIZE 9216 -+ -+/* Configurations */ -+#define EDMA_INTR_CLEAR_TYPE 0 -+#define EDMA_INTR_SW_IDX_W_TYPE 0 -+#define EDMA_FIFO_THRESH_TYPE 0 -+#define EDMA_RSS_TYPE 0 -+#define EDMA_RX_IMT 0x0020 -+#define EDMA_TX_IMT 0x0050 -+#define EDMA_TPD_BURST 5 -+#define EDMA_TXF_BURST 0x100 -+#define EDMA_RFD_BURST 8 -+#define EDMA_RFD_THR 16 -+#define EDMA_RFD_LTHR 0 -+ -+/* RX/TX per CPU based mask/shift */ -+#define EDMA_TX_PER_CPU_MASK 0xF -+#define EDMA_RX_PER_CPU_MASK 0x3 -+#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2 -+#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1 -+#define EDMA_TX_CPU_START_SHIFT 0x2 -+#define EDMA_RX_CPU_START_SHIFT 0x1 -+ -+/* FLags used in transmit direction */ -+#define EDMA_HW_CHECKSUM 0x00000001 -+#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002 -+#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004 -+ -+#define EDMA_SW_DESC_FLAG_LAST 0x1 -+#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2 -+#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4 -+#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8 -+#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10 -+#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20 -+ -+ -+#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1) -+ -+/* Ethtool specific list of EDMA supported features */ -+#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \ -+ | SUPPORTED_10baseT_Full \ -+ | SUPPORTED_100baseT_Half \ -+ | SUPPORTED_100baseT_Full \ -+ | SUPPORTED_1000baseT_Full) -+ -+/* Recevie side atheros Header */ -+#define EDMA_RX_ATH_HDR_VERSION 0x2 -+#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14 -+#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11 -+#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6 -+#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4 -+ -+/* Transmit side atheros Header */ -+#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F -+#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80 -+#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7 -+ -+#define EDMA_TXQ_START_CORE0 8 -+#define EDMA_TXQ_START_CORE1 12 -+#define EDMA_TXQ_START_CORE2 0 -+#define EDMA_TXQ_START_CORE3 4 -+ -+#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00 -+#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000 -+#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F -+#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0 -+ -+#define EDMA_ETH_HDR_LEN 12 -+#define EDMA_ETH_TYPE_MASK 0xFFFF -+ -+#define EDMA_RX_BUFFER_WRITE 16 -+#define EDMA_RFD_AVAIL_THR 80 -+ -+#define EDMA_GMAC_NO_MDIO_PHY PHY_MAX_ADDR -+ -+extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst, -+ __be16 sport, __be16 dport, -+ uint8_t proto, u16 loadbalance, bool action); -+struct edma_ethtool_statistics { -+ u32 tx_q0_pkt; -+ u32 tx_q1_pkt; -+ u32 tx_q2_pkt; -+ u32 tx_q3_pkt; -+ u32 tx_q4_pkt; -+ u32 tx_q5_pkt; -+ u32 tx_q6_pkt; -+ u32 tx_q7_pkt; -+ u32 tx_q8_pkt; -+ u32 tx_q9_pkt; -+ u32 tx_q10_pkt; -+ u32 tx_q11_pkt; -+ u32 tx_q12_pkt; -+ u32 tx_q13_pkt; -+ u32 tx_q14_pkt; -+ u32 tx_q15_pkt; -+ u32 tx_q0_byte; -+ u32 tx_q1_byte; -+ u32 tx_q2_byte; -+ u32 tx_q3_byte; -+ u32 tx_q4_byte; -+ u32 tx_q5_byte; -+ u32 tx_q6_byte; -+ u32 tx_q7_byte; -+ u32 tx_q8_byte; -+ u32 tx_q9_byte; -+ u32 tx_q10_byte; -+ u32 tx_q11_byte; -+ u32 tx_q12_byte; -+ u32 tx_q13_byte; -+ u32 tx_q14_byte; -+ u32 tx_q15_byte; -+ u32 rx_q0_pkt; -+ u32 rx_q1_pkt; -+ u32 rx_q2_pkt; -+ u32 rx_q3_pkt; -+ u32 rx_q4_pkt; -+ u32 rx_q5_pkt; -+ u32 rx_q6_pkt; -+ u32 rx_q7_pkt; -+ u32 rx_q0_byte; -+ u32 rx_q1_byte; -+ u32 rx_q2_byte; -+ u32 rx_q3_byte; -+ u32 rx_q4_byte; -+ u32 rx_q5_byte; -+ u32 rx_q6_byte; -+ u32 rx_q7_byte; -+ u32 tx_desc_error; -+}; -+ -+struct edma_mdio_data { -+ struct mii_bus *mii_bus; -+ void __iomem *membase; -+ int phy_irq[PHY_MAX_ADDR]; -+}; -+ -+/* EDMA LINK state */ -+enum edma_link_state { -+ __EDMA_LINKUP, /* Indicate link is UP */ -+ __EDMA_LINKDOWN /* Indicate link is down */ -+}; -+ -+/* EDMA GMAC state */ -+enum edma_gmac_state { -+ __EDMA_UP /* use to indicate GMAC is up */ -+}; -+ -+/* edma transmit descriptor */ -+struct edma_tx_desc { -+ __le16 len; /* full packet including CRC */ -+ __le16 svlan_tag; /* vlan tag */ -+ __le32 word1; /* byte 4-7 */ -+ __le32 addr; /* address of buffer */ -+ __le32 word3; /* byte 12 */ -+}; -+ -+/* edma receive return descriptor */ -+struct edma_rx_return_desc { -+ u16 rrd0; -+ u16 rrd1; -+ u16 rrd2; -+ u16 rrd3; -+ u16 rrd4; -+ u16 rrd5; -+ u16 rrd6; -+ u16 rrd7; -+}; -+ -+/* RFD descriptor */ -+struct edma_rx_free_desc { -+ __le32 buffer_addr; /* buffer address */ -+}; -+ -+/* edma hw specific data */ -+struct edma_hw { -+ u32 __iomem *hw_addr; /* inner register address */ -+ struct edma_adapter *adapter; /* netdevice adapter */ -+ u32 rx_intr_mask; /*rx interrupt mask */ -+ u32 tx_intr_mask; /* tx interrupt nask */ -+ u32 misc_intr_mask; /* misc interrupt mask */ -+ u32 wol_intr_mask; /* wake on lan interrupt mask */ -+ bool intr_clear_type; /* interrupt clear */ -+ bool intr_sw_idx_w; /* interrupt software index */ -+ u32 rx_head_buff_size; /* Rx buffer size */ -+ u8 rss_type; /* rss protocol type */ -+}; -+ -+/* edma_sw_desc stores software descriptor -+ * SW descriptor has 1:1 map with HW descriptor -+ */ -+struct edma_sw_desc { -+ struct sk_buff *skb; -+ dma_addr_t dma; /* dma address */ -+ u16 length; /* Tx/Rx buffer length */ -+ u32 flags; -+}; -+ -+/* per core related information */ -+struct edma_per_cpu_queues_info { -+ struct napi_struct napi; /* napi associated with the core */ -+ u32 tx_mask; /* tx interrupt mask */ -+ u32 rx_mask; /* rx interrupt mask */ -+ u32 tx_status; /* tx interrupt status */ -+ u32 rx_status; /* rx interrupt status */ -+ u32 tx_start; /* tx queue start */ -+ u32 rx_start; /* rx queue start */ -+ struct edma_common_info *edma_cinfo; /* edma common info */ -+}; -+ -+/* edma specific common info */ -+struct edma_common_info { -+ struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */ -+ struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */ -+ struct platform_device *pdev; /* device structure */ -+ struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED]; -+ struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX]; -+ struct ctl_table_header *edma_ctl_table_hdr; -+ int num_gmac; -+ struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */ -+ int num_rx_queues; /* number of rx queue */ -+ u32 num_tx_queues; /* number of tx queue */ -+ u32 tx_irq[16]; /* number of tx irq */ -+ u32 rx_irq[8]; /* number of rx irq */ -+ u32 from_cpu; /* from CPU TPD field */ -+ u32 num_rxq_per_core; /* Rx queues per core */ -+ u32 num_txq_per_core; /* Tx queues per core */ -+ u16 tx_ring_count; /* Tx ring count */ -+ u16 rx_ring_count; /* Rx ring*/ -+ u16 rx_head_buffer_len; /* rx buffer length */ -+ u16 rx_page_buffer_len; /* rx buffer length */ -+ u32 page_mode; /* Jumbo frame supported flag */ -+ u32 fraglist_mode; /* fraglist supported flag */ -+ struct edma_hw hw; /* edma hw specific structure */ -+ struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */ -+ spinlock_t stats_lock; /* protect edma stats area for updation */ -+}; -+ -+/* transimit packet descriptor (tpd) ring */ -+struct edma_tx_desc_ring { -+ struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */ -+ struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE]; -+ /* Array of netdevs associated with the tpd ring */ -+ void *hw_desc; /* descriptor ring virtual address */ -+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */ -+ int netdev_bmp; /* Bitmap for per-ring netdevs */ -+ u32 size; /* descriptor ring length in bytes */ -+ u16 count; /* number of descriptors in the ring */ -+ dma_addr_t dma; /* descriptor ring physical address */ -+ u16 sw_next_to_fill; /* next Tx descriptor to fill */ -+ u16 sw_next_to_clean; /* next Tx descriptor to clean */ -+}; -+ -+/* receive free descriptor (rfd) ring */ -+struct edma_rfd_desc_ring { -+ void *hw_desc; /* descriptor ring virtual address */ -+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */ -+ u16 size; /* bytes allocated to sw_desc */ -+ u16 count; /* number of descriptors in the ring */ -+ dma_addr_t dma; /* descriptor ring physical address */ -+ u16 sw_next_to_fill; /* next descriptor to fill */ -+ u16 sw_next_to_clean; /* next descriptor to clean */ -+}; -+ -+/* edma_rfs_flter_node - rfs filter node in hash table */ -+struct edma_rfs_filter_node { -+ struct flow_keys keys; -+ u32 flow_id; /* flow_id of filter provided by kernel */ -+ u16 filter_id; /* filter id of filter returned by adaptor */ -+ u16 rq_id; /* desired rq index */ -+ struct hlist_node node; /* edma rfs list node */ -+}; -+ -+/* edma_rfs_flow_tbl - rfs flow table */ -+struct edma_rfs_flow_table { -+ u16 max_num_filter; /* Maximum number of filters edma supports */ -+ u16 hashtoclean; /* hash table index to clean next */ -+ int filter_available; /* Number of free filters available */ -+ struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES]; -+ spinlock_t rfs_ftab_lock; -+ struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */ -+}; -+ -+/* EDMA net device structure */ -+struct edma_adapter { -+ struct net_device *netdev; /* netdevice */ -+ struct platform_device *pdev; /* platform device */ -+ struct edma_common_info *edma_cinfo; /* edma common info */ -+ struct phy_device *phydev; /* Phy device */ -+ struct edma_rfs_flow_table rfs; /* edma rfs flow table */ -+ struct net_device_stats stats; /* netdev statistics */ -+ set_rfs_filter_callback_t set_rfs_rule; -+ u32 flags;/* status flags */ -+ unsigned long state_flags; /* GMAC up/down flags */ -+ u32 forced_speed; /* link force speed */ -+ u32 forced_duplex; /* link force duplex */ -+ u32 link_state; /* phy link state */ -+ u32 phy_mdio_addr; /* PHY device address on MII interface */ -+ u32 poll_required; /* check if link polling is required */ -+ u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */ -+ u32 default_vlan_tag; /* vlan tag */ -+ u32 dp_bitmap; -+ uint8_t phy_id[MII_BUS_ID_SIZE + 3]; -+}; -+ -+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo); -+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo); -+int edma_open(struct net_device *netdev); -+int edma_close(struct net_device *netdev); -+void edma_free_tx_resources(struct edma_common_info *edma_c_info); -+void edma_free_rx_resources(struct edma_common_info *edma_c_info); -+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo); -+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo); -+void edma_free_tx_rings(struct edma_common_info *edma_cinfo); -+void edma_free_rx_rings(struct edma_common_info *edma_cinfo); -+void edma_free_queues(struct edma_common_info *edma_cinfo); -+void edma_irq_disable(struct edma_common_info *edma_cinfo); -+int edma_reset(struct edma_common_info *edma_cinfo); -+int edma_poll(struct napi_struct *napi, int budget); -+netdev_tx_t edma_xmit(struct sk_buff *skb, -+ struct net_device *netdev); -+int edma_configure(struct edma_common_info *edma_cinfo); -+void edma_irq_enable(struct edma_common_info *edma_cinfo); -+void edma_enable_tx_ctrl(struct edma_hw *hw); -+void edma_enable_rx_ctrl(struct edma_hw *hw); -+void edma_stop_rx_tx(struct edma_hw *hw); -+void edma_free_irqs(struct edma_adapter *adapter); -+irqreturn_t edma_interrupt(int irq, void *dev); -+void edma_write_reg(u16 reg_addr, u32 reg_value); -+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value); -+struct net_device_stats *edma_get_stats(struct net_device *netdev); -+int edma_set_mac_addr(struct net_device *netdev, void *p); -+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, -+ u16 rxq, u32 flow_id); -+int edma_register_rfs_filter(struct net_device *netdev, -+ set_rfs_filter_callback_t set_filter); -+void edma_flow_may_expire(unsigned long data); -+void edma_set_ethtool_ops(struct net_device *netdev); -+void edma_set_stp_rstp(bool tag); -+void edma_assign_ath_hdr_type(int tag); -+int edma_get_default_vlan_tag(struct net_device *netdev); -+void edma_adjust_link(struct net_device *netdev); -+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id); -+void edma_read_append_stats(struct edma_common_info *edma_cinfo); -+void edma_change_tx_coalesce(int usecs); -+void edma_change_rx_coalesce(int usecs); -+void edma_get_tx_rx_coalesce(u32 *reg_val); -+void edma_clear_irq_status(void); -+#endif /* _EDMA_H_ */ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c -@@ -0,0 +1,1220 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include "edma.h" -+#include "ess_edma.h" -+ -+/* Weight round robin and virtual QID mask */ -+#define EDMA_WRR_VID_SCTL_MASK 0xffff -+ -+/* Weight round robin and virtual QID shift */ -+#define EDMA_WRR_VID_SCTL_SHIFT 16 -+ -+char edma_axi_driver_name[] = "ess_edma"; -+static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | -+ NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; -+ -+static u32 edma_hw_addr; -+ -+struct timer_list edma_stats_timer; -+ -+char edma_tx_irq[16][64]; -+char edma_rx_irq[8][64]; -+struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED]; -+static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1, -+ EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3}; -+static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1, -+ EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3}; -+ -+static u32 edma_default_ltag __read_mostly = EDMA_LAN_DEFAULT_VLAN; -+static u32 edma_default_wtag __read_mostly = EDMA_WAN_DEFAULT_VLAN; -+static u32 edma_default_group1_vtag __read_mostly = EDMA_DEFAULT_GROUP1_VLAN; -+static u32 edma_default_group2_vtag __read_mostly = EDMA_DEFAULT_GROUP2_VLAN; -+static u32 edma_default_group3_vtag __read_mostly = EDMA_DEFAULT_GROUP3_VLAN; -+static u32 edma_default_group4_vtag __read_mostly = EDMA_DEFAULT_GROUP4_VLAN; -+static u32 edma_default_group5_vtag __read_mostly = EDMA_DEFAULT_GROUP5_VLAN; -+static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE; -+static u32 edma_rss_idt_idx; -+ -+static int edma_weight_assigned_to_q __read_mostly; -+static int edma_queue_to_virtual_q __read_mostly; -+static bool edma_enable_rstp __read_mostly; -+static int edma_athr_hdr_eth_type __read_mostly; -+ -+static int page_mode; -+module_param(page_mode, int, 0); -+MODULE_PARM_DESC(page_mode, "enable page mode"); -+ -+static int overwrite_mode; -+module_param(overwrite_mode, int, 0); -+MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting"); -+ -+static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE; -+module_param(jumbo_mru, int, 0); -+MODULE_PARM_DESC(jumbo_mru, "enable fraglist support"); -+ -+static int num_rxq = 4; -+module_param(num_rxq, int, 0); -+MODULE_PARM_DESC(num_rxq, "change the number of rx queues"); -+ -+void edma_write_reg(u16 reg_addr, u32 reg_value) -+{ -+ writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr))); -+} -+ -+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value) -+{ -+ *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr)); -+} -+ -+/* edma_change_tx_coalesce() -+ * change tx interrupt moderation timer -+ */ -+void edma_change_tx_coalesce(int usecs) -+{ -+ u32 reg_value; -+ -+ /* Here, we right shift the value from the user by 1, this is -+ * done because IMT resolution timer is 2usecs. 1 count -+ * of this register corresponds to 2 usecs. -+ */ -+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value); -+ reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16)); -+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value); -+} -+ -+/* edma_change_rx_coalesce() -+ * change rx interrupt moderation timer -+ */ -+void edma_change_rx_coalesce(int usecs) -+{ -+ u32 reg_value; -+ -+ /* Here, we right shift the value from the user by 1, this is -+ * done because IMT resolution timer is 2usecs. 1 count -+ * of this register corresponds to 2 usecs. -+ */ -+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value); -+ reg_value = ((reg_value & 0xffff0000) | (usecs >> 1)); -+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value); -+} -+ -+/* edma_get_tx_rx_coalesce() -+ * Get tx/rx interrupt moderation value -+ */ -+void edma_get_tx_rx_coalesce(u32 *reg_val) -+{ -+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val); -+} -+ -+void edma_read_append_stats(struct edma_common_info *edma_cinfo) -+{ -+ uint32_t *p; -+ int i; -+ u32 stat; -+ -+ spin_lock_bh(&edma_cinfo->stats_lock); -+ p = (uint32_t *)&(edma_cinfo->edma_ethstats); -+ -+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ spin_unlock_bh(&edma_cinfo->stats_lock); -+} -+ -+static void edma_statistics_timer(unsigned long data) -+{ -+ struct edma_common_info *edma_cinfo = (struct edma_common_info *)data; -+ -+ edma_read_append_stats(edma_cinfo); -+ -+ mod_timer(&edma_stats_timer, jiffies + 1*HZ); -+} -+ -+static int edma_enable_stp_rstp(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) -+ edma_set_stp_rstp(edma_enable_rstp); -+ -+ return ret; -+} -+ -+static int edma_ath_hdr_eth_type(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) -+ edma_assign_ath_hdr_type(edma_athr_hdr_eth_type); -+ -+ return ret; -+} -+ -+static int edma_change_default_lan_vlan(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ int ret; -+ -+ if (!edma_netdev[1]) { -+ pr_err("Netdevice for default_lan does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[1]); -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_ltag; -+ -+ return ret; -+} -+ -+static int edma_change_default_wan_vlan(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ int ret; -+ -+ if (!edma_netdev[0]) { -+ pr_err("Netdevice for default_wan does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[0]); -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_wtag; -+ -+ return ret; -+} -+ -+static int edma_change_group1_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[0]) { -+ pr_err("Netdevice for Group 1 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[0]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group1_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group2_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[1]) { -+ pr_err("Netdevice for Group 2 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[1]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group2_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group3_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[2]) { -+ pr_err("Netdevice for Group 3 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[2]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group3_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group4_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[3]) { -+ pr_err("Netdevice for Group 4 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[3]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group4_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group5_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[4]) { -+ pr_err("Netdevice for Group 5 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[4]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group5_vtag; -+ -+ return ret; -+} -+ -+static int edma_set_rss_idt_value(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write && !ret) -+ edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx), -+ edma_rss_idt_val); -+ return ret; -+} -+ -+static int edma_set_rss_idt_idx(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ u32 old_value = edma_rss_idt_idx; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (!write || ret) -+ return ret; -+ -+ if (edma_rss_idt_idx >= EDMA_NUM_IDT) { -+ pr_err("Invalid RSS indirection table index %d\n", -+ edma_rss_idt_idx); -+ edma_rss_idt_idx = old_value; -+ return -EINVAL; -+ } -+ return ret; -+} -+ -+static int edma_weight_assigned_to_queues(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret, queue_id, weight; -+ u32 reg_data, data, reg_addr; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) { -+ queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK; -+ if (queue_id < 0 || queue_id > 15) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT; -+ if (weight < 0 || weight > 0xF) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ data = weight << EDMA_WRR_SHIFT(queue_id); -+ -+ reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3); -+ edma_read_reg(reg_addr, ®_data); -+ reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id)); -+ edma_write_reg(reg_addr, data | reg_data); -+ } -+ -+ return ret; -+} -+ -+static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret, queue_id, virtual_qid; -+ u32 reg_data, data, reg_addr; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) { -+ queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK; -+ if (queue_id < 0 || queue_id > 15) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ virtual_qid = edma_queue_to_virtual_q >> -+ EDMA_WRR_VID_SCTL_SHIFT; -+ if (virtual_qid < 0 || virtual_qid > 8) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id); -+ -+ reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3); -+ edma_read_reg(reg_addr, ®_data); -+ reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id)); -+ edma_write_reg(reg_addr, data | reg_data); -+ } -+ -+ return ret; -+} -+ -+static struct ctl_table edma_table[] = { -+ { -+ .procname = "default_lan_tag", -+ .data = &edma_default_ltag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_default_lan_vlan -+ }, -+ { -+ .procname = "default_wan_tag", -+ .data = &edma_default_wtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_default_wan_vlan -+ }, -+ { -+ .procname = "weight_assigned_to_queues", -+ .data = &edma_weight_assigned_to_q, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_weight_assigned_to_queues -+ }, -+ { -+ .procname = "queue_to_virtual_queue_map", -+ .data = &edma_queue_to_virtual_q, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_queue_to_virtual_queue_map -+ }, -+ { -+ .procname = "enable_stp_rstp", -+ .data = &edma_enable_rstp, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_enable_stp_rstp -+ }, -+ { -+ .procname = "athr_hdr_eth_type", -+ .data = &edma_athr_hdr_eth_type, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_ath_hdr_eth_type -+ }, -+ { -+ .procname = "default_group1_vlan_tag", -+ .data = &edma_default_group1_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group1_vtag -+ }, -+ { -+ .procname = "default_group2_vlan_tag", -+ .data = &edma_default_group2_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group2_vtag -+ }, -+ { -+ .procname = "default_group3_vlan_tag", -+ .data = &edma_default_group3_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group3_vtag -+ }, -+ { -+ .procname = "default_group4_vlan_tag", -+ .data = &edma_default_group4_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group4_vtag -+ }, -+ { -+ .procname = "default_group5_vlan_tag", -+ .data = &edma_default_group5_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group5_vtag -+ }, -+ { -+ .procname = "edma_rss_idt_value", -+ .data = &edma_rss_idt_val, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_set_rss_idt_value -+ }, -+ { -+ .procname = "edma_rss_idt_idx", -+ .data = &edma_rss_idt_idx, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_set_rss_idt_idx -+ }, -+ {} -+}; -+ -+/* edma_axi_netdev_ops -+ * Describe the operations supported by registered netdevices -+ * -+ * static const struct net_device_ops edma_axi_netdev_ops = { -+ * .ndo_open = edma_open, -+ * .ndo_stop = edma_close, -+ * .ndo_start_xmit = edma_xmit_frame, -+ * .ndo_set_mac_address = edma_set_mac_addr, -+ * } -+ */ -+static const struct net_device_ops edma_axi_netdev_ops = { -+ .ndo_open = edma_open, -+ .ndo_stop = edma_close, -+ .ndo_start_xmit = edma_xmit, -+ .ndo_set_mac_address = edma_set_mac_addr, -+#ifdef CONFIG_RFS_ACCEL -+ .ndo_rx_flow_steer = edma_rx_flow_steer, -+ .ndo_register_rfs_filter = edma_register_rfs_filter, -+ .ndo_get_default_vlan_tag = edma_get_default_vlan_tag, -+#endif -+ .ndo_get_stats = edma_get_stats, -+}; -+ -+/* edma_axi_probe() -+ * Initialise an adapter identified by a platform_device structure. -+ * -+ * The OS initialization, configuring of the adapter private structure, -+ * and a hardware reset occur in the probe. -+ */ -+static int edma_axi_probe(struct platform_device *pdev) -+{ -+ struct edma_common_info *edma_cinfo; -+ struct edma_hw *hw; -+ struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED]; -+ struct resource *res; -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *pnp; -+ struct device_node *mdio_node = NULL; -+ struct platform_device *mdio_plat = NULL; -+ struct mii_bus *miibus = NULL; -+ struct edma_mdio_data *mdio_data = NULL; -+ int i, j, k, err = 0; -+ int portid_bmp; -+ int idx = 0, idx_mac = 0; -+ -+ if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) { -+ dev_err(&pdev->dev, "Invalid CPU Cores\n"); -+ return -EINVAL; -+ } -+ -+ if ((num_rxq != 4) && (num_rxq != 8)) { -+ dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n"); -+ return -EINVAL; -+ } -+ edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL); -+ if (!edma_cinfo) { -+ err = -ENOMEM; -+ goto err_alloc; -+ } -+ -+ edma_cinfo->pdev = pdev; -+ -+ of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac); -+ if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) { -+ pr_err("Invalid DTSI Entry for qcom,num_gmac\n"); -+ err = -EINVAL; -+ goto err_cinfo; -+ } -+ -+ /* Initialize the netdev array before allocation -+ * to avoid double free -+ */ -+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) -+ edma_netdev[i] = NULL; -+ -+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) { -+ edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter), -+ EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE); -+ -+ if (!edma_netdev[i]) { -+ dev_err(&pdev->dev, -+ "net device alloc fails for index=%d\n", i); -+ err = -ENODEV; -+ goto err_ioremap; -+ } -+ -+ SET_NETDEV_DEV(edma_netdev[i], &pdev->dev); -+ platform_set_drvdata(pdev, edma_netdev[i]); -+ edma_cinfo->netdev[i] = edma_netdev[i]; -+ } -+ -+ /* Fill ring details */ -+ edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE; -+ edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4); -+ edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE; -+ -+ /* Update num rx queues based on module parameter */ -+ edma_cinfo->num_rx_queues = num_rxq; -+ edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2); -+ -+ edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE; -+ -+ hw = &edma_cinfo->hw; -+ -+ /* Fill HW defaults */ -+ hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK; -+ hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK; -+ -+ of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode); -+ of_property_read_u32(np, "qcom,rx_head_buf_size", -+ &hw->rx_head_buff_size); -+ -+ if (overwrite_mode) { -+ dev_info(&pdev->dev, "page mode overwritten"); -+ edma_cinfo->page_mode = page_mode; -+ } -+ -+ if (jumbo_mru) -+ edma_cinfo->fraglist_mode = 1; -+ -+ if (edma_cinfo->page_mode) -+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO; -+ else if (edma_cinfo->fraglist_mode) -+ hw->rx_head_buff_size = jumbo_mru; -+ else if (!hw->rx_head_buff_size) -+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE; -+ -+ hw->misc_intr_mask = 0; -+ hw->wol_intr_mask = 0; -+ -+ hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE; -+ hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE; -+ -+ /* configure RSS type to the different protocol that can be -+ * supported -+ */ -+ hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP | -+ EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP | -+ EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(edma_cinfo->hw.hw_addr)) { -+ err = PTR_ERR(edma_cinfo->hw.hw_addr); -+ goto err_ioremap; -+ } -+ -+ edma_hw_addr = (u32)edma_cinfo->hw.hw_addr; -+ -+ /* Parse tx queue interrupt number from device tree */ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) -+ edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i); -+ -+ /* Parse rx queue interrupt number from device tree -+ * Here we are setting j to point to the point where we -+ * left tx interrupt parsing(i.e 16) and run run the loop -+ * from 0 to 7 to parse rx interrupt number. -+ */ -+ for (i = 0, j = edma_cinfo->num_tx_queues, k = 0; -+ i < edma_cinfo->num_rx_queues; i++) { -+ edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j); -+ k += ((num_rxq == 4) ? 2 : 1); -+ j += ((num_rxq == 4) ? 2 : 1); -+ } -+ -+ edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size; -+ edma_cinfo->rx_page_buffer_len = PAGE_SIZE; -+ -+ err = edma_alloc_queues_tx(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of TX queue failed\n"); -+ goto err_tx_qinit; -+ } -+ -+ err = edma_alloc_queues_rx(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of RX queue failed\n"); -+ goto err_rx_qinit; -+ } -+ -+ err = edma_alloc_tx_rings(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of TX resources failed\n"); -+ goto err_tx_rinit; -+ } -+ -+ err = edma_alloc_rx_rings(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of RX resources failed\n"); -+ goto err_rx_rinit; -+ } -+ -+ /* Initialize netdev and netdev bitmap for transmit descriptor rings */ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[i]; -+ int j; -+ -+ etdr->netdev_bmp = 0; -+ for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) { -+ etdr->netdev[j] = NULL; -+ etdr->nq[j] = NULL; -+ } -+ } -+ -+ if (of_property_read_bool(np, "qcom,mdio_supported")) { -+ mdio_node = of_find_compatible_node(NULL, NULL, -+ "qcom,ipq4019-mdio"); -+ if (!mdio_node) { -+ dev_err(&pdev->dev, "cannot find mdio node by phandle"); -+ err = -EIO; -+ goto err_mdiobus_init_fail; -+ } -+ -+ mdio_plat = of_find_device_by_node(mdio_node); -+ if (!mdio_plat) { -+ dev_err(&pdev->dev, -+ "cannot find platform device from mdio node"); -+ of_node_put(mdio_node); -+ err = -EIO; -+ goto err_mdiobus_init_fail; -+ } -+ -+ mdio_data = dev_get_drvdata(&mdio_plat->dev); -+ if (!mdio_data) { -+ dev_err(&pdev->dev, -+ "cannot get mii bus reference from device data"); -+ of_node_put(mdio_node); -+ err = -EIO; -+ goto err_mdiobus_init_fail; -+ } -+ -+ miibus = mdio_data->mii_bus; -+ } -+ -+ for_each_available_child_of_node(np, pnp) { -+ const char *mac_addr; -+ -+ /* this check is needed if parent and daughter dts have -+ * different number of gmac nodes -+ */ -+ if (idx_mac == edma_cinfo->num_gmac) { -+ of_node_put(np); -+ break; -+ } -+ -+ mac_addr = of_get_mac_address(pnp); -+ if (mac_addr) -+ memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN); -+ -+ idx_mac++; -+ } -+ -+ /* Populate the adapter structure register the netdevice */ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ int k, m; -+ -+ adapter[i] = netdev_priv(edma_netdev[i]); -+ adapter[i]->netdev = edma_netdev[i]; -+ adapter[i]->pdev = pdev; -+ for (j = 0; j < CONFIG_NR_CPUS; j++) { -+ m = i % 2; -+ adapter[i]->tx_start_offset[j] = -+ ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1)); -+ /* Share the queues with available net-devices. -+ * For instance , with 5 net-devices -+ * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13 -+ * and eth1/eth3 will get the remaining. -+ */ -+ for (k = adapter[i]->tx_start_offset[j]; k < -+ (adapter[i]->tx_start_offset[j] + 2); k++) { -+ if (edma_fill_netdev(edma_cinfo, k, i, j)) { -+ pr_err("Netdev overflow Error\n"); -+ goto err_register; -+ } -+ } -+ } -+ -+ adapter[i]->edma_cinfo = edma_cinfo; -+ edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops; -+ edma_netdev[i]->max_mtu = 9000; -+ edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM -+ | NETIF_F_HW_VLAN_CTAG_TX -+ | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG | -+ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO; -+ edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM | -+ NETIF_F_HW_VLAN_CTAG_RX -+ | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | -+ NETIF_F_GRO; -+ edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG | -+ NETIF_F_TSO | NETIF_F_TSO6 | -+ NETIF_F_GRO; -+ edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG | -+ NETIF_F_TSO | NETIF_F_TSO6 | -+ NETIF_F_GRO; -+ -+#ifdef CONFIG_RFS_ACCEL -+ edma_netdev[i]->features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+ edma_netdev[i]->hw_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+ edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+ edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+#endif -+ edma_set_ethtool_ops(edma_netdev[i]); -+ -+ /* This just fill in some default MAC address -+ */ -+ if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) { -+ random_ether_addr(edma_netdev[i]->dev_addr); -+ pr_info("EDMA using MAC@ - using"); -+ pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n", -+ *(edma_netdev[i]->dev_addr), -+ *(edma_netdev[i]->dev_addr + 1), -+ *(edma_netdev[i]->dev_addr + 2), -+ *(edma_netdev[i]->dev_addr + 3), -+ *(edma_netdev[i]->dev_addr + 4), -+ *(edma_netdev[i]->dev_addr + 5)); -+ } -+ -+ err = register_netdev(edma_netdev[i]); -+ if (err) -+ goto err_register; -+ -+ /* carrier off reporting is important to -+ * ethtool even BEFORE open -+ */ -+ netif_carrier_off(edma_netdev[i]); -+ -+ /* Allocate reverse irq cpu mapping structure for -+ * receive queues -+ */ -+#ifdef CONFIG_RFS_ACCEL -+ edma_netdev[i]->rx_cpu_rmap = -+ alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE); -+ if (!edma_netdev[i]->rx_cpu_rmap) { -+ err = -ENOMEM; -+ goto err_rmap_alloc_fail; -+ } -+#endif -+ } -+ -+ for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++) -+ edma_cinfo->portid_netdev_lookup_tbl[i] = NULL; -+ -+ for_each_available_child_of_node(np, pnp) { -+ const uint32_t *vlan_tag = NULL; -+ int len; -+ -+ /* this check is needed if parent and daughter dts have -+ * different number of gmac nodes -+ */ -+ if (idx == edma_cinfo->num_gmac) -+ break; -+ -+ /* Populate port-id to netdev lookup table */ -+ vlan_tag = of_get_property(pnp, "vlan_tag", &len); -+ if (!vlan_tag) { -+ pr_err("Vlan tag parsing Failed.\n"); -+ goto err_rmap_alloc_fail; -+ } -+ -+ adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1); -+ vlan_tag++; -+ portid_bmp = of_read_number(vlan_tag, 1); -+ adapter[idx]->dp_bitmap = portid_bmp; -+ -+ portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */ -+ while (portid_bmp) { -+ int port_bit = ffs(portid_bmp); -+ -+ if (port_bit > EDMA_MAX_PORTID_SUPPORTED) -+ goto err_rmap_alloc_fail; -+ edma_cinfo->portid_netdev_lookup_tbl[port_bit] = -+ edma_netdev[idx]; -+ portid_bmp &= ~(1 << (port_bit - 1)); -+ } -+ -+ if (!of_property_read_u32(pnp, "qcom,poll_required", -+ &adapter[idx]->poll_required)) { -+ if (adapter[idx]->poll_required) { -+ of_property_read_u32(pnp, "qcom,phy_mdio_addr", -+ &adapter[idx]->phy_mdio_addr); -+ of_property_read_u32(pnp, "qcom,forced_speed", -+ &adapter[idx]->forced_speed); -+ of_property_read_u32(pnp, "qcom,forced_duplex", -+ &adapter[idx]->forced_duplex); -+ -+ /* create a phyid using MDIO bus id -+ * and MDIO bus address -+ */ -+ snprintf(adapter[idx]->phy_id, -+ MII_BUS_ID_SIZE + 3, PHY_ID_FMT, -+ miibus->id, -+ adapter[idx]->phy_mdio_addr); -+ } -+ } else { -+ adapter[idx]->poll_required = 0; -+ adapter[idx]->forced_speed = SPEED_1000; -+ adapter[idx]->forced_duplex = DUPLEX_FULL; -+ } -+ -+ idx++; -+ } -+ -+ edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net, -+ "net/edma", -+ edma_table); -+ if (!edma_cinfo->edma_ctl_table_hdr) { -+ dev_err(&pdev->dev, "edma sysctl table hdr not registered\n"); -+ goto err_unregister_sysctl_tbl; -+ } -+ -+ /* Disable all 16 Tx and 8 rx irqs */ -+ edma_irq_disable(edma_cinfo); -+ -+ err = edma_reset(edma_cinfo); -+ if (err) { -+ err = -EIO; -+ goto err_reset; -+ } -+ -+ /* populate per_core_info, do a napi_Add, request 16 TX irqs, -+ * 8 RX irqs, do a napi enable -+ */ -+ for (i = 0; i < CONFIG_NR_CPUS; i++) { -+ u8 rx_start; -+ -+ edma_cinfo->edma_percpu_info[i].napi.state = 0; -+ -+ netif_napi_add(edma_netdev[0], -+ &edma_cinfo->edma_percpu_info[i].napi, -+ edma_poll, 64); -+ napi_enable(&edma_cinfo->edma_percpu_info[i].napi); -+ edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i]; -+ edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK -+ << (i << EDMA_RX_PER_CPU_MASK_SHIFT); -+ edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i]; -+ edma_cinfo->edma_percpu_info[i].rx_start = -+ i << EDMA_RX_CPU_START_SHIFT; -+ rx_start = i << EDMA_RX_CPU_START_SHIFT; -+ edma_cinfo->edma_percpu_info[i].tx_status = 0; -+ edma_cinfo->edma_percpu_info[i].rx_status = 0; -+ edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo; -+ -+ /* Request irq per core */ -+ for (j = edma_cinfo->edma_percpu_info[i].tx_start; -+ j < tx_start[i] + 4; j++) { -+ sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j); -+ err = request_irq(edma_cinfo->tx_irq[j], -+ edma_interrupt, -+ 0, -+ &edma_tx_irq[j][0], -+ &edma_cinfo->edma_percpu_info[i]); -+ if (err) -+ goto err_reset; -+ } -+ -+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; -+ j < (rx_start + -+ ((edma_cinfo->num_rx_queues == 4) ? 1 : 2)); -+ j++) { -+ sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j); -+ err = request_irq(edma_cinfo->rx_irq[j], -+ edma_interrupt, -+ 0, -+ &edma_rx_irq[j][0], -+ &edma_cinfo->edma_percpu_info[i]); -+ if (err) -+ goto err_reset; -+ } -+ -+#ifdef CONFIG_RFS_ACCEL -+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; -+ j < rx_start + 2; j += 2) { -+ err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap, -+ edma_cinfo->rx_irq[j]); -+ if (err) -+ goto err_rmap_add_fail; -+ } -+#endif -+ } -+ -+ /* Used to clear interrupt status, allocate rx buffer, -+ * configure edma descriptors registers -+ */ -+ err = edma_configure(edma_cinfo); -+ if (err) { -+ err = -EIO; -+ goto err_configure; -+ } -+ -+ /* Configure RSS indirection table. -+ * 128 hash will be configured in the following -+ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively -+ * and so on -+ */ -+ for (i = 0; i < EDMA_NUM_IDT; i++) -+ edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE); -+ -+ /* Configure load balance mapping table. -+ * 4 table entry will be configured according to the -+ * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4} -+ * respectively. -+ */ -+ edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE); -+ -+ /* Configure Virtual queue for Tx rings -+ * User can also change this value runtime through -+ * a sysctl -+ */ -+ edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE); -+ edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE); -+ -+ /* Configure Max AXI Burst write size to 128 bytes*/ -+ edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE, -+ EDMA_AXIW_MAXWRSIZE_VALUE); -+ -+ /* Enable All 16 tx and 8 rx irq mask */ -+ edma_irq_enable(edma_cinfo); -+ edma_enable_tx_ctrl(&edma_cinfo->hw); -+ edma_enable_rx_ctrl(&edma_cinfo->hw); -+ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ if (adapter[i]->poll_required) { -+ adapter[i]->phydev = -+ phy_connect(edma_netdev[i], -+ (const char *)adapter[i]->phy_id, -+ &edma_adjust_link, -+ PHY_INTERFACE_MODE_SGMII); -+ if (IS_ERR(adapter[i]->phydev)) { -+ dev_dbg(&pdev->dev, "PHY attach FAIL"); -+ err = -EIO; -+ goto edma_phy_attach_fail; -+ } else { -+ adapter[i]->phydev->advertising |= -+ ADVERTISED_Pause | -+ ADVERTISED_Asym_Pause; -+ adapter[i]->phydev->supported |= -+ SUPPORTED_Pause | -+ SUPPORTED_Asym_Pause; -+ } -+ } else { -+ adapter[i]->phydev = NULL; -+ } -+ } -+ -+ spin_lock_init(&edma_cinfo->stats_lock); -+ -+ init_timer(&edma_stats_timer); -+ edma_stats_timer.expires = jiffies + 1*HZ; -+ edma_stats_timer.data = (unsigned long)edma_cinfo; -+ edma_stats_timer.function = edma_statistics_timer; /* timer handler */ -+ add_timer(&edma_stats_timer); -+ -+ return 0; -+ -+edma_phy_attach_fail: -+ miibus = NULL; -+err_configure: -+#ifdef CONFIG_RFS_ACCEL -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap); -+ adapter[i]->netdev->rx_cpu_rmap = NULL; -+ } -+#endif -+err_rmap_add_fail: -+ edma_free_irqs(adapter[0]); -+ for (i = 0; i < CONFIG_NR_CPUS; i++) -+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi); -+err_reset: -+err_unregister_sysctl_tbl: -+err_rmap_alloc_fail: -+ for (i = 0; i < edma_cinfo->num_gmac; i++) -+ unregister_netdev(edma_netdev[i]); -+err_register: -+err_mdiobus_init_fail: -+ edma_free_rx_rings(edma_cinfo); -+err_rx_rinit: -+ edma_free_tx_rings(edma_cinfo); -+err_tx_rinit: -+ edma_free_queues(edma_cinfo); -+err_rx_qinit: -+err_tx_qinit: -+ iounmap(edma_cinfo->hw.hw_addr); -+err_ioremap: -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ if (edma_netdev[i]) -+ free_netdev(edma_netdev[i]); -+ } -+err_cinfo: -+ kfree(edma_cinfo); -+err_alloc: -+ return err; -+} -+ -+/* edma_axi_remove() -+ * Device Removal Routine -+ * -+ * edma_axi_remove is called by the platform subsystem to alert the driver -+ * that it should release a platform device. -+ */ -+static int edma_axi_remove(struct platform_device *pdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(edma_netdev[0]); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ struct edma_hw *hw = &edma_cinfo->hw; -+ int i; -+ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) -+ unregister_netdev(edma_netdev[i]); -+ -+ edma_stop_rx_tx(hw); -+ for (i = 0; i < CONFIG_NR_CPUS; i++) -+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi); -+ -+ edma_irq_disable(edma_cinfo); -+ edma_write_reg(EDMA_REG_RX_ISR, 0xff); -+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); -+#ifdef CONFIG_RFS_ACCEL -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap); -+ edma_netdev[i]->rx_cpu_rmap = NULL; -+ } -+#endif -+ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ struct edma_adapter *adapter = netdev_priv(edma_netdev[i]); -+ -+ if (adapter->phydev) -+ phy_disconnect(adapter->phydev); -+ } -+ -+ del_timer_sync(&edma_stats_timer); -+ edma_free_irqs(adapter); -+ unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr); -+ edma_free_tx_resources(edma_cinfo); -+ edma_free_rx_resources(edma_cinfo); -+ edma_free_tx_rings(edma_cinfo); -+ edma_free_rx_rings(edma_cinfo); -+ edma_free_queues(edma_cinfo); -+ for (i = 0; i < edma_cinfo->num_gmac; i++) -+ free_netdev(edma_netdev[i]); -+ -+ kfree(edma_cinfo); -+ -+ return 0; -+} -+ -+static const struct of_device_id edma_of_mtable[] = { -+ {.compatible = "qcom,ess-edma" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, edma_of_mtable); -+ -+static struct platform_driver edma_axi_driver = { -+ .driver = { -+ .name = edma_axi_driver_name, -+ .of_match_table = edma_of_mtable, -+ }, -+ .probe = edma_axi_probe, -+ .remove = edma_axi_remove, -+}; -+ -+module_platform_driver(edma_axi_driver); -+ -+MODULE_AUTHOR("Qualcomm Atheros Inc"); -+MODULE_DESCRIPTION("QCA ESS EDMA driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c -@@ -0,0 +1,374 @@ -+/* -+ * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include "edma.h" -+ -+struct edma_ethtool_stats { -+ uint8_t stat_string[ETH_GSTRING_LEN]; -+ uint32_t stat_offset; -+}; -+ -+#define EDMA_STAT(m) offsetof(struct edma_ethtool_statistics, m) -+#define DRVINFO_LEN 32 -+ -+/* Array of strings describing statistics -+ */ -+static const struct edma_ethtool_stats edma_gstrings_stats[] = { -+ {"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)}, -+ {"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)}, -+ {"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)}, -+ {"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)}, -+ {"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)}, -+ {"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)}, -+ {"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)}, -+ {"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)}, -+ {"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)}, -+ {"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)}, -+ {"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)}, -+ {"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)}, -+ {"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)}, -+ {"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)}, -+ {"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)}, -+ {"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)}, -+ {"tx_q0_byte", EDMA_STAT(tx_q0_byte)}, -+ {"tx_q1_byte", EDMA_STAT(tx_q1_byte)}, -+ {"tx_q2_byte", EDMA_STAT(tx_q2_byte)}, -+ {"tx_q3_byte", EDMA_STAT(tx_q3_byte)}, -+ {"tx_q4_byte", EDMA_STAT(tx_q4_byte)}, -+ {"tx_q5_byte", EDMA_STAT(tx_q5_byte)}, -+ {"tx_q6_byte", EDMA_STAT(tx_q6_byte)}, -+ {"tx_q7_byte", EDMA_STAT(tx_q7_byte)}, -+ {"tx_q8_byte", EDMA_STAT(tx_q8_byte)}, -+ {"tx_q9_byte", EDMA_STAT(tx_q9_byte)}, -+ {"tx_q10_byte", EDMA_STAT(tx_q10_byte)}, -+ {"tx_q11_byte", EDMA_STAT(tx_q11_byte)}, -+ {"tx_q12_byte", EDMA_STAT(tx_q12_byte)}, -+ {"tx_q13_byte", EDMA_STAT(tx_q13_byte)}, -+ {"tx_q14_byte", EDMA_STAT(tx_q14_byte)}, -+ {"tx_q15_byte", EDMA_STAT(tx_q15_byte)}, -+ {"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)}, -+ {"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)}, -+ {"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)}, -+ {"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)}, -+ {"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)}, -+ {"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)}, -+ {"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)}, -+ {"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)}, -+ {"rx_q0_byte", EDMA_STAT(rx_q0_byte)}, -+ {"rx_q1_byte", EDMA_STAT(rx_q1_byte)}, -+ {"rx_q2_byte", EDMA_STAT(rx_q2_byte)}, -+ {"rx_q3_byte", EDMA_STAT(rx_q3_byte)}, -+ {"rx_q4_byte", EDMA_STAT(rx_q4_byte)}, -+ {"rx_q5_byte", EDMA_STAT(rx_q5_byte)}, -+ {"rx_q6_byte", EDMA_STAT(rx_q6_byte)}, -+ {"rx_q7_byte", EDMA_STAT(rx_q7_byte)}, -+ {"tx_desc_error", EDMA_STAT(tx_desc_error)}, -+}; -+ -+#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats) -+ -+/* edma_get_strset_count() -+ * Get strset count -+ */ -+static int edma_get_strset_count(struct net_device *netdev, -+ int sset) -+{ -+ switch (sset) { -+ case ETH_SS_STATS: -+ return EDMA_STATS_LEN; -+ default: -+ netdev_dbg(netdev, "%s: Invalid string set", __func__); -+ return -EOPNOTSUPP; -+ } -+} -+ -+ -+/* edma_get_strings() -+ * get stats string -+ */ -+static void edma_get_strings(struct net_device *netdev, uint32_t stringset, -+ uint8_t *data) -+{ -+ uint8_t *p = data; -+ uint32_t i; -+ -+ switch (stringset) { -+ case ETH_SS_STATS: -+ for (i = 0; i < EDMA_STATS_LEN; i++) { -+ memcpy(p, edma_gstrings_stats[i].stat_string, -+ min((size_t)ETH_GSTRING_LEN, -+ strlen(edma_gstrings_stats[i].stat_string) -+ + 1)); -+ p += ETH_GSTRING_LEN; -+ } -+ break; -+ } -+} -+ -+/* edma_get_ethtool_stats() -+ * Get ethtool statistics -+ */ -+static void edma_get_ethtool_stats(struct net_device *netdev, -+ struct ethtool_stats *stats, uint64_t *data) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ int i; -+ uint8_t *p = NULL; -+ -+ edma_read_append_stats(edma_cinfo); -+ -+ for(i = 0; i < EDMA_STATS_LEN; i++) { -+ p = (uint8_t *)&(edma_cinfo->edma_ethstats) + -+ edma_gstrings_stats[i].stat_offset; -+ data[i] = *(uint32_t *)p; -+ } -+} -+ -+/* edma_get_drvinfo() -+ * get edma driver info -+ */ -+static void edma_get_drvinfo(struct net_device *dev, -+ struct ethtool_drvinfo *info) -+{ -+ strlcpy(info->driver, "ess_edma", DRVINFO_LEN); -+ strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN); -+} -+ -+/* edma_nway_reset() -+ * Reset the phy, if available. -+ */ -+static int edma_nway_reset(struct net_device *netdev) -+{ -+ return -EINVAL; -+} -+ -+/* edma_get_wol() -+ * get wake on lan info -+ */ -+static void edma_get_wol(struct net_device *netdev, -+ struct ethtool_wolinfo *wol) -+{ -+ wol->supported = 0; -+ wol->wolopts = 0; -+} -+ -+/* edma_get_msglevel() -+ * get message level. -+ */ -+static uint32_t edma_get_msglevel(struct net_device *netdev) -+{ -+ return 0; -+} -+ -+/* edma_get_settings() -+ * Get edma settings -+ */ -+static int edma_get_settings(struct net_device *netdev, -+ struct ethtool_cmd *ecmd) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ if (adapter->poll_required) { -+ struct phy_device *phydev = NULL; -+ uint16_t phyreg; -+ -+ if ((adapter->forced_speed != SPEED_UNKNOWN) -+ && !(adapter->poll_required)) -+ return -EPERM; -+ -+ phydev = adapter->phydev; -+ -+ ecmd->advertising = phydev->advertising; -+ ecmd->autoneg = phydev->autoneg; -+ -+ if (adapter->link_state == __EDMA_LINKDOWN) { -+ ecmd->speed = SPEED_UNKNOWN; -+ ecmd->duplex = DUPLEX_UNKNOWN; -+ } else { -+ ecmd->speed = phydev->speed; -+ ecmd->duplex = phydev->duplex; -+ } -+ -+ ecmd->phy_address = adapter->phy_mdio_addr; -+ -+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA); -+ if (phyreg & LPA_10HALF) -+ ecmd->lp_advertising |= ADVERTISED_10baseT_Half; -+ -+ if (phyreg & LPA_10FULL) -+ ecmd->lp_advertising |= ADVERTISED_10baseT_Full; -+ -+ if (phyreg & LPA_100HALF) -+ ecmd->lp_advertising |= ADVERTISED_100baseT_Half; -+ -+ if (phyreg & LPA_100FULL) -+ ecmd->lp_advertising |= ADVERTISED_100baseT_Full; -+ -+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000); -+ if (phyreg & LPA_1000HALF) -+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Half; -+ -+ if (phyreg & LPA_1000FULL) -+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Full; -+ } else { -+ /* If the speed/duplex for this GMAC is forced and we -+ * are not polling for link state changes, return the -+ * values as specified by platform. This will be true -+ * for GMACs connected to switch, and interfaces that -+ * do not use a PHY. -+ */ -+ if (!(adapter->poll_required)) { -+ if (adapter->forced_speed != SPEED_UNKNOWN) { -+ /* set speed and duplex */ -+ ethtool_cmd_speed_set(ecmd, SPEED_1000); -+ ecmd->duplex = DUPLEX_FULL; -+ -+ /* Populate capabilities advertised by self */ -+ ecmd->advertising = 0; -+ ecmd->autoneg = 0; -+ ecmd->port = PORT_TP; -+ ecmd->transceiver = XCVR_EXTERNAL; -+ } else { -+ /* non link polled and non -+ * forced speed/duplex interface -+ */ -+ return -EIO; -+ } -+ } -+ } -+ -+ return 0; -+} -+ -+/* edma_set_settings() -+ * Set EDMA settings -+ */ -+static int edma_set_settings(struct net_device *netdev, -+ struct ethtool_cmd *ecmd) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct phy_device *phydev = NULL; -+ -+ if ((adapter->forced_speed != SPEED_UNKNOWN) && -+ !adapter->poll_required) -+ return -EPERM; -+ -+ phydev = adapter->phydev; -+ phydev->advertising = ecmd->advertising; -+ phydev->autoneg = ecmd->autoneg; -+ phydev->speed = ethtool_cmd_speed(ecmd); -+ phydev->duplex = ecmd->duplex; -+ -+ genphy_config_aneg(phydev); -+ -+ return 0; -+} -+ -+/* edma_get_coalesce -+ * get interrupt mitigation -+ */ -+static int edma_get_coalesce(struct net_device *netdev, -+ struct ethtool_coalesce *ec) -+{ -+ u32 reg_val; -+ -+ edma_get_tx_rx_coalesce(®_val); -+ -+ /* We read the Interrupt Moderation Timer(IMT) register value, -+ * use lower 16 bit for rx and higher 16 bit for Tx. We do a -+ * left shift by 1, because IMT resolution timer is 2usecs. -+ * Hence the value given by the register is multiplied by 2 to -+ * get the actual time in usecs. -+ */ -+ ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1); -+ ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1); -+ -+ return 0; -+} -+ -+/* edma_set_coalesce -+ * set interrupt mitigation -+ */ -+static int edma_set_coalesce(struct net_device *netdev, -+ struct ethtool_coalesce *ec) -+{ -+ if (ec->tx_coalesce_usecs) -+ edma_change_tx_coalesce(ec->tx_coalesce_usecs); -+ if (ec->rx_coalesce_usecs) -+ edma_change_rx_coalesce(ec->rx_coalesce_usecs); -+ -+ return 0; -+} -+ -+/* edma_set_priv_flags() -+ * Set EDMA private flags -+ */ -+static int edma_set_priv_flags(struct net_device *netdev, u32 flags) -+{ -+ return 0; -+} -+ -+/* edma_get_priv_flags() -+ * get edma driver flags -+ */ -+static u32 edma_get_priv_flags(struct net_device *netdev) -+{ -+ return 0; -+} -+ -+/* edma_get_ringparam() -+ * get ring size -+ */ -+static void edma_get_ringparam(struct net_device *netdev, -+ struct ethtool_ringparam *ring) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ -+ ring->tx_max_pending = edma_cinfo->tx_ring_count; -+ ring->rx_max_pending = edma_cinfo->rx_ring_count; -+} -+ -+/* Ethtool operations -+ */ -+static const struct ethtool_ops edma_ethtool_ops = { -+ .get_drvinfo = &edma_get_drvinfo, -+ .get_link = ðtool_op_get_link, -+ .get_msglevel = &edma_get_msglevel, -+ .nway_reset = &edma_nway_reset, -+ .get_wol = &edma_get_wol, -+ .get_settings = &edma_get_settings, -+ .set_settings = &edma_set_settings, -+ .get_strings = &edma_get_strings, -+ .get_sset_count = &edma_get_strset_count, -+ .get_ethtool_stats = &edma_get_ethtool_stats, -+ .get_coalesce = &edma_get_coalesce, -+ .set_coalesce = &edma_set_coalesce, -+ .get_priv_flags = edma_get_priv_flags, -+ .set_priv_flags = edma_set_priv_flags, -+ .get_ringparam = edma_get_ringparam, -+}; -+ -+/* edma_set_ethtool_ops -+ * Set ethtool operations -+ */ -+void edma_set_ethtool_ops(struct net_device *netdev) -+{ -+ netdev->ethtool_ops = &edma_ethtool_ops; -+} ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h -@@ -0,0 +1,332 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#ifndef _ESS_EDMA_H_ -+#define _ESS_EDMA_H_ -+ -+#include -+ -+struct edma_adapter; -+struct edma_hw; -+ -+/* register definition */ -+#define EDMA_REG_MAS_CTRL 0x0 -+#define EDMA_REG_TIMEOUT_CTRL 0x004 -+#define EDMA_REG_DBG0 0x008 -+#define EDMA_REG_DBG1 0x00C -+#define EDMA_REG_SW_CTRL0 0x100 -+#define EDMA_REG_SW_CTRL1 0x104 -+ -+/* Interrupt Status Register */ -+#define EDMA_REG_RX_ISR 0x200 -+#define EDMA_REG_TX_ISR 0x208 -+#define EDMA_REG_MISC_ISR 0x210 -+#define EDMA_REG_WOL_ISR 0x218 -+ -+#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x) -+ -+#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100 -+#define EDMA_MISC_ISR_AXIR_ERR 0x00000200 -+#define EDMA_MISC_ISR_TXF_DEAD 0x00000400 -+#define EDMA_MISC_ISR_AXIW_ERR 0x00000800 -+#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000 -+ -+#define EDMA_WOL_ISR 0x00000001 -+ -+/* Interrupt Mask Register */ -+#define EDMA_REG_MISC_IMR 0x214 -+#define EDMA_REG_WOL_IMR 0x218 -+ -+#define EDMA_RX_IMR_NORMAL_MASK 0x1 -+#define EDMA_TX_IMR_NORMAL_MASK 0x1 -+#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF -+#define EDMA_WOL_IMR_NORMAL_MASK 0x1 -+ -+/* Edma receive consumer index */ -+#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */ -+/* Edma transmit consumer index */ -+#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */ -+ -+/* IRQ Moderator Initial Timer Register */ -+#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280 -+#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF -+#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0 -+#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16 -+ -+/* Interrupt Control Register */ -+#define EDMA_REG_INTR_CTRL 0x284 -+#define EDMA_INTR_CLR_TYP_SHIFT 0 -+#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1 -+#define EDMA_INTR_CLEAR_TYPE_W1 0 -+#define EDMA_INTR_CLEAR_TYPE_R 1 -+ -+/* RX Interrupt Mask Register */ -+#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */ -+ -+/* TX Interrupt mask register */ -+#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */ -+ -+/* Load Ptr Register -+ * Software sets this bit after the initialization of the head and tail -+ */ -+#define EDMA_REG_TX_SRAM_PART 0x400 -+#define EDMA_LOAD_PTR_SHIFT 16 -+ -+/* TXQ Control Register */ -+#define EDMA_REG_TXQ_CTRL 0x404 -+#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10 -+#define EDMA_TXQ_CTRL_TXQ_EN 0x20 -+#define EDMA_TXQ_CTRL_ENH_MODE 0x40 -+#define EDMA_TXQ_CTRL_LS_8023_EN 0x80 -+#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100 -+#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200 -+#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF -+#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF -+#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0 -+#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16 -+ -+#define EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */ -+#define EDMA_TXF_WATER_MARK_MASK 0x0FFF -+#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0 -+#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16 -+#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000 -+ -+/* WRR Control Register */ -+#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c -+#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410 -+#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414 -+#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418 -+ -+/* Weight round robin(WRR), it takes queue as input, and computes -+ * starting bits where we need to write the weight for a particular -+ * queue -+ */ -+#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20) -+ -+/* Tx Descriptor Control Register */ -+#define EDMA_REG_TPD_RING_SIZE 0x41C -+#define EDMA_TPD_RING_SIZE_SHIFT 0 -+#define EDMA_TPD_RING_SIZE_MASK 0xFFFF -+ -+/* Transmit descriptor base address */ -+#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */ -+ -+/* TPD Index Register */ -+#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */ -+ -+#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF -+#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000 -+#define EDMA_TPD_PROD_IDX_MASK 0xFFFF -+#define EDMA_TPD_CONS_IDX_MASK 0xFFFF -+#define EDMA_TPD_PROD_IDX_SHIFT 0 -+#define EDMA_TPD_CONS_IDX_SHIFT 16 -+ -+/* TX Virtual Queue Mapping Control Register */ -+#define EDMA_REG_VQ_CTRL0 0x4A0 -+#define EDMA_REG_VQ_CTRL1 0x4A4 -+ -+/* Virtual QID shift, it takes queue as input, and computes -+ * Virtual QID position in virtual qid control register -+ */ -+#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24) -+ -+/* Virtual Queue Default Value */ -+#define EDMA_VQ_REG_VALUE 0x240240 -+ -+/* Tx side Port Interface Control Register */ -+#define EDMA_REG_PORT_CTRL 0x4A8 -+#define EDMA_PAD_EN_SHIFT 15 -+ -+/* Tx side VLAN Configuration Register */ -+#define EDMA_REG_VLAN_CFG 0x4AC -+ -+#define EDMA_TX_CVLAN 16 -+#define EDMA_TX_INS_CVLAN 17 -+#define EDMA_TX_CVLAN_TAG_SHIFT 0 -+ -+#define EDMA_TX_SVLAN 14 -+#define EDMA_TX_INS_SVLAN 15 -+#define EDMA_TX_SVLAN_TAG_SHIFT 16 -+ -+/* Tx Queue Packet Statistic Register */ -+#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */ -+ -+#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF -+ -+/* Tx Queue Byte Statistic Register */ -+#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */ -+ -+/* Load Balance Based Ring Offset Register */ -+#define EDMA_REG_LB_RING 0x800 -+#define EDMA_LB_RING_ENTRY_MASK 0xff -+#define EDMA_LB_RING_ID_MASK 0x7 -+#define EDMA_LB_RING_PROFILE_ID_MASK 0x3 -+#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8 -+#define EDMA_LB_RING_ID_OFFSET 0 -+#define EDMA_LB_RING_PROFILE_ID_OFFSET 3 -+#define EDMA_LB_REG_VALUE 0x6040200 -+ -+/* Load Balance Priority Mapping Register */ -+#define EDMA_REG_LB_PRI_START 0x804 -+#define EDMA_REG_LB_PRI_END 0x810 -+#define EDMA_LB_PRI_REG_INC 4 -+#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4 -+#define EDMA_LB_PRI_ENTRY_MASK 0xf -+ -+/* RSS Priority Mapping Register */ -+#define EDMA_REG_RSS_PRI 0x820 -+#define EDMA_RSS_PRI_ENTRY_MASK 0xf -+#define EDMA_RSS_RING_ID_MASK 0x7 -+#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4 -+ -+/* RSS Indirection Register */ -+#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */ -+#define EDMA_NUM_IDT 16 -+#define EDMA_RSS_IDT_VALUE 0x64206420 -+ -+/* Default RSS Ring Register */ -+#define EDMA_REG_DEF_RSS 0x890 -+#define EDMA_DEF_RSS_MASK 0x7 -+ -+/* RSS Hash Function Type Register */ -+#define EDMA_REG_RSS_TYPE 0x894 -+#define EDMA_RSS_TYPE_NONE 0x01 -+#define EDMA_RSS_TYPE_IPV4TCP 0x02 -+#define EDMA_RSS_TYPE_IPV6_TCP 0x04 -+#define EDMA_RSS_TYPE_IPV4_UDP 0x08 -+#define EDMA_RSS_TYPE_IPV6UDP 0x10 -+#define EDMA_RSS_TYPE_IPV4 0x20 -+#define EDMA_RSS_TYPE_IPV6 0x40 -+#define EDMA_RSS_HASH_MODE_MASK 0x7f -+ -+#define EDMA_REG_RSS_HASH_VALUE 0x8C0 -+ -+#define EDMA_REG_RSS_TYPE_RESULT 0x8C4 -+ -+#define EDMA_HASH_TYPE_START 0 -+#define EDMA_HASH_TYPE_END 5 -+#define EDMA_HASH_TYPE_SHIFT 12 -+ -+#define EDMA_RFS_FLOW_ENTRIES 1024 -+#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1) -+#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128 -+ -+/* RFD Base Address Register */ -+#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */ -+ -+/* RFD Index Register */ -+#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2)) -+ -+#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF -+#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000 -+#define EDMA_RFD_PROD_IDX_MASK 0xFFF -+#define EDMA_RFD_CONS_IDX_MASK 0xFFF -+#define EDMA_RFD_PROD_IDX_SHIFT 0 -+#define EDMA_RFD_CONS_IDX_SHIFT 16 -+ -+/* Rx Descriptor Control Register */ -+#define EDMA_REG_RX_DESC0 0xA10 -+#define EDMA_RFD_RING_SIZE_MASK 0xFFF -+#define EDMA_RX_BUF_SIZE_MASK 0xFFFF -+#define EDMA_RFD_RING_SIZE_SHIFT 0 -+#define EDMA_RX_BUF_SIZE_SHIFT 16 -+ -+#define EDMA_REG_RX_DESC1 0xA14 -+#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F -+#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F -+#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF -+#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0 -+#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8 -+#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16 -+ -+/* RXQ Control Register */ -+#define EDMA_REG_RXQ_CTRL 0xA18 -+#define EDMA_FIFO_THRESH_TYPE_SHIF 0 -+#define EDMA_FIFO_THRESH_128_BYTE 0x0 -+#define EDMA_FIFO_THRESH_64_BYTE 0x1 -+#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002 -+#define EDMA_RXQ_CTRL_EN 0x0000FF00 -+ -+/* AXI Burst Size Config */ -+#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C -+#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0 -+ -+/* Rx Statistics Register */ -+#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */ -+#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */ -+ -+/* WoL Pattern Length Register */ -+#define EDMA_REG_WOL_PATTERN_LEN0 0xC00 -+#define EDMA_WOL_PT_LEN_MASK 0xFF -+#define EDMA_WOL_PT0_LEN_SHIFT 0 -+#define EDMA_WOL_PT1_LEN_SHIFT 8 -+#define EDMA_WOL_PT2_LEN_SHIFT 16 -+#define EDMA_WOL_PT3_LEN_SHIFT 24 -+ -+#define EDMA_REG_WOL_PATTERN_LEN1 0xC04 -+#define EDMA_WOL_PT4_LEN_SHIFT 0 -+#define EDMA_WOL_PT5_LEN_SHIFT 8 -+#define EDMA_WOL_PT6_LEN_SHIFT 16 -+ -+/* WoL Control Register */ -+#define EDMA_REG_WOL_CTRL 0xC08 -+#define EDMA_WOL_WK_EN 0x00000001 -+#define EDMA_WOL_MG_EN 0x00000002 -+#define EDMA_WOL_PT0_EN 0x00000004 -+#define EDMA_WOL_PT1_EN 0x00000008 -+#define EDMA_WOL_PT2_EN 0x00000010 -+#define EDMA_WOL_PT3_EN 0x00000020 -+#define EDMA_WOL_PT4_EN 0x00000040 -+#define EDMA_WOL_PT5_EN 0x00000080 -+#define EDMA_WOL_PT6_EN 0x00000100 -+ -+/* MAC Control Register */ -+#define EDMA_REG_MAC_CTRL0 0xC20 -+#define EDMA_REG_MAC_CTRL1 0xC24 -+ -+/* WoL Pattern Register */ -+#define EDMA_REG_WOL_PATTERN_START 0x5000 -+#define EDMA_PATTERN_PART_REG_OFFSET 0x40 -+ -+ -+/* TX descriptor fields */ -+#define EDMA_TPD_HDR_SHIFT 0 -+#define EDMA_TPD_PPPOE_EN 0x00000100 -+#define EDMA_TPD_IP_CSUM_EN 0x00000200 -+#define EDMA_TPD_TCP_CSUM_EN 0x0000400 -+#define EDMA_TPD_UDP_CSUM_EN 0x00000800 -+#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00 -+#define EDMA_TPD_LSO_EN 0x00001000 -+#define EDMA_TPD_LSO_V2_EN 0x00002000 -+#define EDMA_TPD_IPV4_EN 0x00010000 -+#define EDMA_TPD_MSS_MASK 0x1FFF -+#define EDMA_TPD_MSS_SHIFT 18 -+#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18 -+ -+/* RRD descriptor fields */ -+#define EDMA_RRD_NUM_RFD_MASK 0x000F -+#define EDMA_RRD_SVLAN 0x8000 -+#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF; -+ -+#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF -+#define EDMA_RRD_CSUM_FAIL_MASK 0xC000 -+#define EDMA_RRD_CVLAN 0x0001 -+#define EDMA_RRD_DESC_VALID 0x8000 -+ -+#define EDMA_RRD_PRIORITY_SHIFT 4 -+#define EDMA_RRD_PRIORITY_MASK 0x7 -+#define EDMA_RRD_PORT_TYPE_SHIFT 7 -+#define EDMA_RRD_PORT_TYPE_MASK 0x1F -+#endif /* _ESS_EDMA_H_ */ diff --git a/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch deleted file mode 100644 index 80b16a8211..0000000000 --- a/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch +++ /dev/null @@ -1,92 +0,0 @@ -From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 01:01:10 +0100 -Subject: [PATCH] dts: ipq4019: add ethernet essedma node - -This patch adds the device-tree node for the ethernet -interfaces. - -Note: The driver isn't anywhere close to be upstream, -so the info might change. - -Signed-off-by: Christian Lamparter ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 60 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -44,6 +44,8 @@ - spi1 = &blsp1_spi2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp1_i2c4; -+ ethernet0 = &gmac0; -+ ethernet1 = &gmac1; - }; - - cpus { -@@ -618,6 +620,64 @@ - status = "disabled"; - }; - -+ edma@c080000 { -+ compatible = "qcom,ess-edma"; -+ reg = <0xc080000 0x8000>; -+ qcom,page-mode = <0>; -+ qcom,rx_head_buf_size = <1540>; -+ qcom,mdio_supported; -+ qcom,poll_required = <1>; -+ qcom,num_gmac = <2>; -+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING -+ 0 66 IRQ_TYPE_EDGE_RISING -+ 0 67 IRQ_TYPE_EDGE_RISING -+ 0 68 IRQ_TYPE_EDGE_RISING -+ 0 69 IRQ_TYPE_EDGE_RISING -+ 0 70 IRQ_TYPE_EDGE_RISING -+ 0 71 IRQ_TYPE_EDGE_RISING -+ 0 72 IRQ_TYPE_EDGE_RISING -+ 0 73 IRQ_TYPE_EDGE_RISING -+ 0 74 IRQ_TYPE_EDGE_RISING -+ 0 75 IRQ_TYPE_EDGE_RISING -+ 0 76 IRQ_TYPE_EDGE_RISING -+ 0 77 IRQ_TYPE_EDGE_RISING -+ 0 78 IRQ_TYPE_EDGE_RISING -+ 0 79 IRQ_TYPE_EDGE_RISING -+ 0 80 IRQ_TYPE_EDGE_RISING -+ 0 240 IRQ_TYPE_EDGE_RISING -+ 0 241 IRQ_TYPE_EDGE_RISING -+ 0 242 IRQ_TYPE_EDGE_RISING -+ 0 243 IRQ_TYPE_EDGE_RISING -+ 0 244 IRQ_TYPE_EDGE_RISING -+ 0 245 IRQ_TYPE_EDGE_RISING -+ 0 246 IRQ_TYPE_EDGE_RISING -+ 0 247 IRQ_TYPE_EDGE_RISING -+ 0 248 IRQ_TYPE_EDGE_RISING -+ 0 249 IRQ_TYPE_EDGE_RISING -+ 0 250 IRQ_TYPE_EDGE_RISING -+ 0 251 IRQ_TYPE_EDGE_RISING -+ 0 252 IRQ_TYPE_EDGE_RISING -+ 0 253 IRQ_TYPE_EDGE_RISING -+ 0 254 IRQ_TYPE_EDGE_RISING -+ 0 255 IRQ_TYPE_EDGE_RISING>; -+ -+ status = "disabled"; -+ -+ gmac0: gmac0 { -+ local-mac-address = [00 00 00 00 00 00]; -+ vlan_tag = <1 0x1f>; -+ }; -+ -+ gmac1: gmac1 { -+ local-mac-address = [00 00 00 00 00 00]; -+ qcom,phy_mdio_addr = <4>; -+ qcom,poll_required = <1>; -+ qcom,forced_speed = <1000>; -+ qcom,forced_duplex = <1>; -+ vlan_tag = <2 0x20>; -+ }; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-4.14/712-mr33-essedma.patch b/target/linux/ipq40xx/patches-4.14/712-mr33-essedma.patch deleted file mode 100644 index 6be30070d6..0000000000 --- a/target/linux/ipq40xx/patches-4.14/712-mr33-essedma.patch +++ /dev/null @@ -1,340 +0,0 @@ ---- a/drivers/net/ethernet/qualcomm/essedma/edma_axi.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c -@@ -17,6 +17,11 @@ - #include - #include - #include -+#include -+#include -+#include -+#include -+#include - #include "edma.h" - #include "ess_edma.h" - -@@ -83,7 +88,103 @@ void edma_read_reg(u16 reg_addr, volatil - *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr)); - } - --/* edma_change_tx_coalesce() -+static void ess_write_reg(struct edma_common_info *edma, u16 reg_addr, u32 reg_value) -+{ -+ writel(reg_value, ((void __iomem *) -+ ((unsigned long)edma->ess_hw_addr + reg_addr))); -+} -+ -+static void ess_read_reg(struct edma_common_info *edma, u16 reg_addr, -+ volatile u32 *reg_value) -+{ -+ *reg_value = readl((void __iomem *) -+ ((unsigned long)edma->ess_hw_addr + reg_addr)); -+} -+ -+static int ess_reset(struct edma_common_info *edma) -+{ -+ struct device_node *switch_node = NULL; -+ struct reset_control *ess_rst; -+ u32 regval; -+ -+ switch_node = of_find_node_by_name(NULL, "ess-switch"); -+ if (!switch_node) { -+ pr_err("switch-node not found\n"); -+ return -EINVAL; -+ } -+ -+ ess_rst = of_reset_control_get(switch_node, "ess_rst"); -+ of_node_put(switch_node); -+ -+ if (IS_ERR(ess_rst)) { -+ pr_err("failed to find ess_rst!\n"); -+ return -ENOENT; -+ } -+ -+ reset_control_assert(ess_rst); -+ msleep(10); -+ reset_control_deassert(ess_rst); -+ msleep(100); -+ reset_control_put(ess_rst); -+ -+ /* Enable only port 5 <--> port 0 -+ * bits 0:6 bitmap of ports it can fwd to */ -+#define SET_PORT_BMP(r,v) \ -+ ess_read_reg(edma, r, ®val); \ -+ ess_write_reg(edma, r, ((regval & ~0x3F) | v)); -+ -+ SET_PORT_BMP(ESS_PORT0_LOOKUP_CTRL,0x20); -+ SET_PORT_BMP(ESS_PORT1_LOOKUP_CTRL,0x00); -+ SET_PORT_BMP(ESS_PORT2_LOOKUP_CTRL,0x00); -+ SET_PORT_BMP(ESS_PORT3_LOOKUP_CTRL,0x00); -+ SET_PORT_BMP(ESS_PORT4_LOOKUP_CTRL,0x00); -+ SET_PORT_BMP(ESS_PORT5_LOOKUP_CTRL,0x01); -+ ess_write_reg(edma, ESS_RGMII_CTRL, 0x400); -+ ess_write_reg(edma, ESS_PORT0_STATUS, ESS_PORT_1G_FDX); -+ ess_write_reg(edma, ESS_PORT5_STATUS, ESS_PORT_1G_FDX); -+ ess_write_reg(edma, ESS_PORT0_HEADER_CTRL, 0); -+#undef SET_PORT_BMP -+ -+ /* forward multicast and broadcast frames to CPU */ -+ ess_write_reg(edma, ESS_FWD_CTRL1, -+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_UC_FLOOD_S) | -+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_MC_FLOOD_S) | -+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_BC_FLOOD_S)); -+ -+ return 0; -+} -+ -+void ess_set_port_status_speed(struct edma_common_info *edma, -+ struct phy_device *phydev, uint8_t port_id) -+{ -+ uint16_t reg_off = ESS_PORT0_STATUS + (4 * port_id); -+ uint32_t reg_val = 0; -+ -+ ess_read_reg(edma, reg_off, ®_val); -+ -+ /* reset the speed bits [0:1] */ -+ reg_val &= ~ESS_PORT_STATUS_SPEED_INV; -+ -+ /* set the new speed */ -+ switch(phydev->speed) { -+ case SPEED_1000: reg_val |= ESS_PORT_STATUS_SPEED_1000; break; -+ case SPEED_100: reg_val |= ESS_PORT_STATUS_SPEED_100; break; -+ case SPEED_10: reg_val |= ESS_PORT_STATUS_SPEED_10; break; -+ default: reg_val |= ESS_PORT_STATUS_SPEED_INV; break; -+ } -+ -+ /* check full/half duplex */ -+ if (phydev->duplex) { -+ reg_val |= ESS_PORT_STATUS_DUPLEX_MODE; -+ } else { -+ reg_val &= ~ESS_PORT_STATUS_DUPLEX_MODE; -+ } -+ -+ ess_write_reg(edma, reg_off, reg_val); -+} -+ -+/* -+ * edma_change_tx_coalesce() - * change tx interrupt moderation timer - */ - void edma_change_tx_coalesce(int usecs) -@@ -551,6 +652,31 @@ static struct ctl_table edma_table[] = { - {} - }; - -+static int ess_parse(struct edma_common_info *edma) -+{ -+ struct device_node *switch_node; -+ int ret = -EINVAL; -+ -+ switch_node = of_find_node_by_name(NULL, "ess-switch"); -+ if (!switch_node) { -+ pr_err("cannot find ess-switch node\n"); -+ goto out; -+ } -+ -+ edma->ess_hw_addr = of_io_request_and_map(switch_node, -+ 0, KBUILD_MODNAME); -+ if (!edma->ess_hw_addr) { -+ pr_err("%s ioremap fail.", __func__); -+ goto out; -+ } -+ -+ edma->ess_clk = of_clk_get_by_name(switch_node, "ess_clk"); -+ ret = clk_prepare_enable(edma->ess_clk); -+out: -+ of_node_put(switch_node); -+ return ret; -+} -+ - /* edma_axi_netdev_ops - * Describe the operations supported by registered netdevices - * -@@ -786,6 +912,17 @@ static int edma_axi_probe(struct platfor - miibus = mdio_data->mii_bus; - } - -+ if (of_property_read_bool(np, "qcom,single-phy") && -+ edma_cinfo->num_gmac == 1) { -+ err = ess_parse(edma_cinfo); -+ if (!err) -+ err = ess_reset(edma_cinfo); -+ if (err) -+ goto err_single_phy_init; -+ else -+ edma_cinfo->is_single_phy = true; -+ } -+ - for_each_available_child_of_node(np, pnp) { - const char *mac_addr; - -@@ -1074,11 +1211,15 @@ static int edma_axi_probe(struct platfor - - for (i = 0; i < edma_cinfo->num_gmac; i++) { - if (adapter[i]->poll_required) { -+ int phy_mode = of_get_phy_mode(np); -+ -+ if (phy_mode < 0) -+ phy_mode = PHY_INTERFACE_MODE_SGMII; - adapter[i]->phydev = - phy_connect(edma_netdev[i], - (const char *)adapter[i]->phy_id, - &edma_adjust_link, -- PHY_INTERFACE_MODE_SGMII); -+ phy_mode); - if (IS_ERR(adapter[i]->phydev)) { - dev_dbg(&pdev->dev, "PHY attach FAIL"); - err = -EIO; -@@ -1125,6 +1266,9 @@ err_rmap_alloc_fail: - for (i = 0; i < edma_cinfo->num_gmac; i++) - unregister_netdev(edma_netdev[i]); - err_register: -+err_single_phy_init: -+ iounmap(edma_cinfo->ess_hw_addr); -+ clk_disable_unprepare(edma_cinfo->ess_clk); - err_mdiobus_init_fail: - edma_free_rx_rings(edma_cinfo); - err_rx_rinit: -@@ -1185,6 +1329,8 @@ static int edma_axi_remove(struct platfo - del_timer_sync(&edma_stats_timer); - edma_free_irqs(adapter); - unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr); -+ iounmap(edma_cinfo->ess_hw_addr); -+ clk_disable_unprepare(edma_cinfo->ess_clk); - edma_free_tx_resources(edma_cinfo); - edma_free_rx_resources(edma_cinfo); - edma_free_tx_rings(edma_cinfo); ---- a/drivers/net/ethernet/qualcomm/essedma/edma.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c -@@ -161,8 +161,10 @@ static void edma_configure_rx(struct edm - /* Set Rx FIFO threshold to start to DMA data to host */ - rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE; - -- /* Set RX remove vlan bit */ -- rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN; -+ if (!edma_cinfo->is_single_phy) { -+ /* Set RX remove vlan bit */ -+ rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN; -+ } - - edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data); - } -@@ -1295,6 +1297,10 @@ void edma_adjust_link(struct net_device - if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) { - dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed); - adapter->link_state = __EDMA_LINKUP; -+ if (adapter->edma_cinfo->is_single_phy) { -+ ess_set_port_status_speed(adapter->edma_cinfo, phydev, -+ ffs(adapter->dp_bitmap) - 1); -+ } - netif_carrier_on(netdev); - if (netif_running(netdev)) - netif_tx_wake_all_queues(netdev); -@@ -1388,10 +1394,12 @@ netdev_tx_t edma_xmit(struct sk_buff *sk - } - - /* Check and mark VLAN tag offload */ -- if (skb_vlan_tag_present(skb)) -- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG; -- else if (adapter->default_vlan_tag) -- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG; -+ if (!adapter->edma_cinfo->is_single_phy) { -+ if (unlikely(skb_vlan_tag_present(skb))) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG; -+ else if (adapter->default_vlan_tag) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG; -+ } - - /* Check and mark checksum offload */ - if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) ---- a/drivers/net/ethernet/qualcomm/essedma/edma.h -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h -@@ -31,6 +31,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -331,6 +332,10 @@ struct edma_common_info { - struct edma_hw hw; /* edma hw specific structure */ - struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */ - spinlock_t stats_lock; /* protect edma stats area for updation */ -+ -+ bool is_single_phy; -+ void __iomem *ess_hw_addr; -+ struct clk *ess_clk; - }; - - /* transimit packet descriptor (tpd) ring */ -@@ -443,4 +448,6 @@ void edma_change_tx_coalesce(int usecs); - void edma_change_rx_coalesce(int usecs); - void edma_get_tx_rx_coalesce(u32 *reg_val); - void edma_clear_irq_status(void); -+void ess_set_port_status_speed(struct edma_common_info *edma_cinfo, -+ struct phy_device *phydev, uint8_t port_id); - #endif /* _EDMA_H_ */ ---- a/drivers/net/ethernet/qualcomm/essedma/ess_edma.h -+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h -@@ -329,4 +329,61 @@ struct edma_hw; - #define EDMA_RRD_PRIORITY_MASK 0x7 - #define EDMA_RRD_PORT_TYPE_SHIFT 7 - #define EDMA_RRD_PORT_TYPE_MASK 0x1F -+ -+#define ESS_RGMII_CTRL 0x0004 -+ -+/* Port status registers */ -+#define ESS_PORT0_STATUS 0x007C -+#define ESS_PORT1_STATUS 0x0080 -+#define ESS_PORT2_STATUS 0x0084 -+#define ESS_PORT3_STATUS 0x0088 -+#define ESS_PORT4_STATUS 0x008C -+#define ESS_PORT5_STATUS 0x0090 -+ -+#define ESS_PORT_STATUS_HDX_FLOW_CTL 0x80 -+#define ESS_PORT_STATUS_DUPLEX_MODE 0x40 -+#define ESS_PORT_STATUS_RX_FLOW_EN 0x20 -+#define ESS_PORT_STATUS_TX_FLOW_EN 0x10 -+#define ESS_PORT_STATUS_RX_MAC_EN 0x08 -+#define ESS_PORT_STATUS_TX_MAC_EN 0x04 -+#define ESS_PORT_STATUS_SPEED_INV 0x03 -+#define ESS_PORT_STATUS_SPEED_1000 0x02 -+#define ESS_PORT_STATUS_SPEED_100 0x01 -+#define ESS_PORT_STATUS_SPEED_10 0x00 -+ -+#define ESS_PORT_1G_FDX (ESS_PORT_STATUS_DUPLEX_MODE | ESS_PORT_STATUS_RX_FLOW_EN | \ -+ ESS_PORT_STATUS_TX_FLOW_EN | ESS_PORT_STATUS_RX_MAC_EN | \ -+ ESS_PORT_STATUS_TX_MAC_EN | ESS_PORT_STATUS_SPEED_1000) -+ -+#define PHY_STATUS_REG 0x11 -+#define PHY_STATUS_SPEED 0xC000 -+#define PHY_STATUS_SPEED_SHIFT 14 -+#define PHY_STATUS_DUPLEX 0x2000 -+#define PHY_STATUS_DUPLEX_SHIFT 13 -+#define PHY_STATUS_SPEED_DUPLEX_RESOLVED 0x0800 -+#define PHY_STATUS_CARRIER 0x0400 -+#define PHY_STATUS_CARRIER_SHIFT 10 -+ -+/* Port lookup control registers */ -+#define ESS_PORT0_LOOKUP_CTRL 0x0660 -+#define ESS_PORT1_LOOKUP_CTRL 0x066C -+#define ESS_PORT2_LOOKUP_CTRL 0x0678 -+#define ESS_PORT3_LOOKUP_CTRL 0x0684 -+#define ESS_PORT4_LOOKUP_CTRL 0x0690 -+#define ESS_PORT5_LOOKUP_CTRL 0x069C -+ -+#define ESS_PORT0_HEADER_CTRL 0x009C -+ -+#define ESS_PORTS_ALL 0x3f -+ -+#define ESS_FWD_CTRL1 0x0624 -+#define ESS_FWD_CTRL1_UC_FLOOD BITS(0, 7) -+#define ESS_FWD_CTRL1_UC_FLOOD_S 0 -+#define ESS_FWD_CTRL1_MC_FLOOD BITS(8, 7) -+#define ESS_FWD_CTRL1_MC_FLOOD_S 8 -+#define ESS_FWD_CTRL1_BC_FLOOD BITS(16, 7) -+#define ESS_FWD_CTRL1_BC_FLOOD_S 16 -+#define ESS_FWD_CTRL1_IGMP BITS(24, 7) -+#define ESS_FWD_CTRL1_IGMP_S 24 -+ - #endif /* _ESS_EDMA_H_ */ diff --git a/target/linux/ipq40xx/patches-4.14/713-essedma-alloc-skb-ip-align.patch b/target/linux/ipq40xx/patches-4.14/713-essedma-alloc-skb-ip-align.patch deleted file mode 100644 index 8c70fceb01..0000000000 --- a/target/linux/ipq40xx/patches-4.14/713-essedma-alloc-skb-ip-align.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 17681f0bb474d0d227f07369144149d1555d8bce Mon Sep 17 00:00:00 2001 -From: Chen Minqiang -Date: Sun, 17 Jun 2018 04:14:13 +0800 -Subject: [PATCH] essedma: alloc skb ip align - -Signed-off-by: Chen Minqiang ---- - drivers/net/ethernet/qualcomm/essedma/edma.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/qualcomm/essedma/edma.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c -@@ -201,7 +201,7 @@ static int edma_alloc_rx_buf(struct edma - skb = sw_desc->skb; - } else { - /* alloc skb */ -- skb = netdev_alloc_skb(edma_netdev[0], length); -+ skb = netdev_alloc_skb_ip_align(edma_netdev[0], length); - if (!skb) { - /* Better luck next round */ - break; diff --git a/target/linux/ipq40xx/patches-4.14/714-essedma-add-fix-for-memory-allocation.patch b/target/linux/ipq40xx/patches-4.14/714-essedma-add-fix-for-memory-allocation.patch deleted file mode 100644 index 5b9fcf780c..0000000000 --- a/target/linux/ipq40xx/patches-4.14/714-essedma-add-fix-for-memory-allocation.patch +++ /dev/null @@ -1,197 +0,0 @@ -From 72c050acbc425ef99313d5c2e4c866e25567e569 Mon Sep 17 00:00:00 2001 -From: Rakesh Nair -Date: Thu, 8 Jun 2017 14:29:20 +0530 -Subject: [PATCH] CHROMIUM: net: qualcomm: Add fix for memory allocation issues - -Added ethtool counters for memory allocation failures accounting. -Added support to track number of allocation failures that could -not be fulfilled in the current iteration in the rx descriptor -field and use the info to allocate in the subsequent iteration. - -Change-Id: Ie4fd3b6cf25304e5db2c9247a498791e7e9bb4aa -Signed-off-by: Rakesh Nair -Signed-off-by: Kan Yan -Reviewed-on: https://chromium-review.googlesource.com/535419 -Reviewed-by: Grant Grundler ---- - drivers/net/ethernet/qualcomm/essedma/edma.c | 54 ++++++++++++++----- - drivers/net/ethernet/qualcomm/essedma/edma.h | 2 + - .../ethernet/qualcomm/essedma/edma_ethtool.c | 1 + - 3 files changed, 43 insertions(+), 14 deletions(-) - ---- a/drivers/net/ethernet/qualcomm/essedma/edma.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c -@@ -103,6 +103,9 @@ static int edma_alloc_rx_ring(struct edm - return -ENOMEM; - } - -+ /* Initialize pending_fill */ -+ erxd->pending_fill = 0; -+ - return 0; - } - -@@ -185,11 +188,8 @@ static int edma_alloc_rx_buf(struct edma - u16 prod_idx, length; - u32 reg_data; - -- if (cleaned_count > erdr->count) { -- dev_err(&pdev->dev, "Incorrect cleaned_count %d", -- cleaned_count); -- return -1; -- } -+ if (cleaned_count > erdr->count) -+ cleaned_count = erdr->count - 1; - - i = erdr->sw_next_to_fill; - -@@ -199,6 +199,9 @@ static int edma_alloc_rx_buf(struct edma - - if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) { - skb = sw_desc->skb; -+ -+ /* Clear REUSE Flag */ -+ sw_desc->flags &= ~EDMA_SW_DESC_FLAG_SKB_REUSE; - } else { - /* alloc skb */ - skb = netdev_alloc_skb_ip_align(edma_netdev[0], length); -@@ -264,6 +267,13 @@ static int edma_alloc_rx_buf(struct edma - reg_data &= ~EDMA_RFD_PROD_IDX_BITS; - reg_data |= prod_idx; - edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data); -+ -+ /* If we couldn't allocate all the buffers -+ * we increment the alloc failure counters -+ */ -+ if (cleaned_count) -+ edma_cinfo->edma_ethstats.rx_alloc_fail_ctr++; -+ - return cleaned_count; - } - -@@ -534,7 +544,7 @@ static int edma_rx_complete_paged(struct - * edma_rx_complete() - * Main api called from the poll function to process rx packets. - */ --static void edma_rx_complete(struct edma_common_info *edma_cinfo, -+static u16 edma_rx_complete(struct edma_common_info *edma_cinfo, - int *work_done, int work_to_do, int queue_id, - struct napi_struct *napi) - { -@@ -554,6 +564,7 @@ static void edma_rx_complete(struct edma - u16 count = erdr->count, rfd_avail; - u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3}; - -+ cleaned_count = erdr->pending_fill; - sw_next_to_clean = erdr->sw_next_to_clean; - - edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); -@@ -652,12 +663,13 @@ static void edma_rx_complete(struct edma - (*work_done)++; - drop_count = 0; - } -- if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ if (cleaned_count >= EDMA_RX_BUFFER_WRITE) { - /* If buffer clean count reaches 16, we replenish HW buffers. */ - ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); - edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), - sw_next_to_clean); - cleaned_count = ret_count; -+ erdr->pending_fill = ret_count; - } - continue; - } -@@ -730,11 +742,12 @@ static void edma_rx_complete(struct edma - adapter->stats.rx_bytes += length; - - /* Check if we reached refill threshold */ -- if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ if (cleaned_count >= EDMA_RX_BUFFER_WRITE) { - ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); - edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), - sw_next_to_clean); - cleaned_count = ret_count; -+ erdr->pending_fill = ret_count; - } - - /* At this point skb should go to stack */ -@@ -756,11 +769,17 @@ static void edma_rx_complete(struct edma - /* Refill here in case refill threshold wasn't reached */ - if (likely(cleaned_count)) { - ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -- if (ret_count) -- dev_dbg(&pdev->dev, "Not all buffers was reallocated"); -+ erdr->pending_fill = ret_count; -+ if (ret_count) { -+ if (net_ratelimit()) -+ dev_dbg(&pdev->dev, "Not all buffers was reallocated"); -+ } -+ - edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), - erdr->sw_next_to_clean); - } -+ -+ return erdr->pending_fill; - } - - /* edma_delete_rfs_filter() -@@ -2064,6 +2083,7 @@ int edma_poll(struct napi_struct *napi, - u32 shadow_rx_status, shadow_tx_status; - int queue_id; - int i, work_done = 0; -+ u16 rx_pending_fill; - - /* Store the Rx/Tx status by ANDing it with - * appropriate CPU RX?TX mask -@@ -2097,13 +2117,19 @@ int edma_poll(struct napi_struct *napi, - */ - while (edma_percpu_info->rx_status) { - queue_id = ffs(edma_percpu_info->rx_status) - 1; -- edma_rx_complete(edma_cinfo, &work_done, -- budget, queue_id, napi); -+ rx_pending_fill = edma_rx_complete(edma_cinfo, &work_done, -+ budget, queue_id, napi); - -- if (likely(work_done < budget)) -+ if (likely(work_done < budget)) { -+ if (rx_pending_fill) { -+ /* reschedule poll() to refill rx buffer deficit */ -+ work_done = budget; -+ break; -+ } - edma_percpu_info->rx_status &= ~(1 << queue_id); -- else -+ } else { - break; -+ } - } - - /* Clear the status register, to avoid the interrupts to ---- a/drivers/net/ethernet/qualcomm/essedma/edma.h -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h -@@ -225,6 +225,7 @@ struct edma_ethtool_statistics { - u32 rx_q6_byte; - u32 rx_q7_byte; - u32 tx_desc_error; -+ u32 rx_alloc_fail_ctr; - }; - - struct edma_mdio_data { -@@ -362,6 +363,7 @@ struct edma_rfd_desc_ring { - dma_addr_t dma; /* descriptor ring physical address */ - u16 sw_next_to_fill; /* next descriptor to fill */ - u16 sw_next_to_clean; /* next descriptor to clean */ -+ u16 pending_fill; /* fill pending from previous iteration */ - }; - - /* edma_rfs_flter_node - rfs filter node in hash table */ ---- a/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c -@@ -78,6 +78,7 @@ static const struct edma_ethtool_stats e - {"rx_q6_byte", EDMA_STAT(rx_q6_byte)}, - {"rx_q7_byte", EDMA_STAT(rx_q7_byte)}, - {"tx_desc_error", EDMA_STAT(tx_desc_error)}, -+ {"rx_alloc_fail_ctr", EDMA_STAT(rx_alloc_fail_ctr)}, - }; - - #define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats) diff --git a/target/linux/ipq40xx/patches-4.14/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq40xx/patches-4.14/850-soc-add-qualcomm-syscon.patch deleted file mode 100644 index 59e277c349..0000000000 --- a/target/linux/ipq40xx/patches-4.14/850-soc-add-qualcomm-syscon.patch +++ /dev/null @@ -1,177 +0,0 @@ -From: Christian Lamparter -Subject: SoC: add qualcomm syscon ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st - obj-$(CONFIG_QCOM_SMP2P) += smp2p.o - obj-$(CONFIG_QCOM_SMSM) += smsm.o - obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o -+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o ---- a/drivers/soc/qcom/Kconfig -+++ b/drivers/soc/qcom/Kconfig -@@ -78,6 +78,13 @@ config QCOM_SMSM - Say yes here to support the Qualcomm Shared Memory State Machine. - The state machine is represented by bits in shared memory. - -+config QCOM_TCSR -+ tristate "QCOM Top Control and Status Registers" -+ depends on ARCH_QCOM -+ help -+ Say y here to enable TCSR support. The TCSR provides control -+ functions for various peripherals. -+ - config QCOM_WCNSS_CTRL - tristate "Qualcomm WCNSS control driver" - depends on ARCH_QCOM ---- /dev/null -+++ b/drivers/soc/qcom/qcom_tcsr.c -@@ -0,0 +1,98 @@ -+/* -+ * Copyright (c) 2014, The Linux foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License rev 2 and -+ * only rev 2 as published by the free Software foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TCSR_USB_PORT_SEL 0xb0 -+#define TCSR_USB_HSPHY_CONFIG 0xC -+ -+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0 -+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf -+ -+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0 -+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4 -+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4 -+ -+static int tcsr_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ const struct device_node *node = pdev->dev.of_node; -+ void __iomem *base; -+ u32 val; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { -+ dev_err(&pdev->dev, "setting usb port select = %d\n", val); -+ writel(val, base + TCSR_USB_PORT_SEL); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) { -+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val); -+ writel(val, base + TCSR_USB_HSPHY_CONFIG); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) { -+ u32 tmp = 0; -+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val); -+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK); -+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK); -+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) { -+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val); -+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET); -+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) { -+ dev_info(&pdev->dev, -+ "setting wifi_noc_memtype_m0_m2 = %x\n", val); -+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id tcsr_dt_match[] = { -+ { .compatible = "qcom,tcsr", }, -+ { }, -+}; -+ -+MODULE_DEVICE_TABLE(of, tcsr_dt_match); -+ -+static struct platform_driver tcsr_driver = { -+ .driver = { -+ .name = "tcsr", -+ .owner = THIS_MODULE, -+ .of_match_table = tcsr_dt_match, -+ }, -+ .probe = tcsr_probe, -+}; -+ -+module_platform_driver(tcsr_driver); -+ -+MODULE_AUTHOR("Andy Gross "); -+MODULE_DESCRIPTION("QCOM TCSR driver"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/include/dt-bindings/soc/qcom,tcsr.h -@@ -0,0 +1,48 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#ifndef __DT_BINDINGS_QCOM_TCSR_H -+#define __DT_BINDINGS_QCOM_TCSR_H -+ -+#define TCSR_USB_SELECT_USB3_P0 0x1 -+#define TCSR_USB_SELECT_USB3_P1 0x2 -+#define TCSR_USB_SELECT_USB3_DUAL 0x3 -+ -+/* IPQ40xx HS PHY Mode Select */ -+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7 -+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7 -+ -+/* IPQ40xx ess interface mode select */ -+#define TCSR_ESS_PSGMII 0 -+#define TCSR_ESS_PSGMII_RGMII5 1 -+#define TCSR_ESS_PSGMII_RMII0 2 -+#define TCSR_ESS_PSGMII_RMII1 4 -+#define TCSR_ESS_PSGMII_RMII0_RMII1 6 -+#define TCSR_ESS_PSGMII_RGMII4 9 -+ -+/* -+ * IPQ40xx WiFi Global Config -+ * Bit 30:AXID_EN -+ * Enable AXI master bus Axid translating to confirm all txn submitted by order -+ * Bit 24: Use locally generated socslv_wxi_bvalid -+ * 1: use locally generate socslv_wxi_bvalid for performance. -+ * 0: use SNOC socslv_wxi_bvalid. -+ */ -+#define TCSR_WIFI_GLB_CFG 0x41000000 -+ -+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */ -+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222 -+ -+/* TCSR A/B REG */ -+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 -+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 -+ -+#endif diff --git a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch deleted file mode 100644 index 349f67c665..0000000000 --- a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch +++ /dev/null @@ -1,157 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -15,6 +15,7 @@ - */ - - #include "qcom-ipq4019.dtsi" -+#include - - / { - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; -@@ -29,6 +30,32 @@ - }; - - soc { -+ tcsr@194b000 { -+ /* select hostmode */ -+ compatible = "qcom,tcsr"; -+ reg = <0x194b000 0x100>; -+ qcom,usb-hsphy-mode-select = ; -+ status = "ok"; -+ }; -+ -+ ess_tcsr@1953000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1953000 0x1000>; -+ qcom,ess-interface-select = ; -+ }; -+ -+ tcsr@1949000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1949000 0x100>; -+ qcom,wifi_glb_cfg = ; -+ }; -+ -+ tcsr@1957000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1957000 0x100>; -+ qcom,wifi_noc_memtype_m0_m2 = ; -+ }; -+ - rng@22000 { - status = "ok"; - }; -@@ -74,14 +101,6 @@ - pinctrl-names = "default"; - status = "ok"; - cs-gpios = <&tlmm 54 0>; -- -- mx25l25635e@0 { -- #address-cells = <1>; -- #size-cells = <1>; -- reg = <0>; -- compatible = "mx25l25635e"; -- spi-max-frequency = <24000000>; -- }; - }; - - serial@78af000 { -@@ -110,6 +129,22 @@ - status = "ok"; - }; - -+ mdio@90000 { -+ status = "okay"; -+ }; -+ -+ ess-switch@c000000 { -+ status = "okay"; -+ }; -+ -+ ess-psgmii@98000 { -+ status = "okay"; -+ }; -+ -+ edma@c080000 { -+ status = "okay"; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - status = "ok"; - }; ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -@@ -18,5 +18,73 @@ - - / { - model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; -+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019"; - -+ memory { -+ device_type = "memory"; -+ reg = <0x80000000 0x10000000>; -+ }; -+}; -+ -+&blsp1_spi1 { -+ mx25l25635f@0 { -+ compatible = "mx25l25635f", "jedec,spi-nor"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0>; -+ spi-max-frequency = <24000000>; -+ -+ SBL1@0 { -+ label = "SBL1"; -+ reg = <0x0 0x40000>; -+ read-only; -+ }; -+ MIBIB@40000 { -+ label = "MIBIB"; -+ reg = <0x40000 0x20000>; -+ read-only; -+ }; -+ QSEE@60000 { -+ label = "QSEE"; -+ reg = <0x60000 0x60000>; -+ read-only; -+ }; -+ CDT@c0000 { -+ label = "CDT"; -+ reg = <0xc0000 0x10000>; -+ read-only; -+ }; -+ DDRPARAMS@d0000 { -+ label = "DDRPARAMS"; -+ reg = <0xd0000 0x10000>; -+ read-only; -+ }; -+ APPSBLENV@e0000 { -+ label = "APPSBLENV"; -+ reg = <0xe0000 0x10000>; -+ read-only; -+ }; -+ APPSBL@f0000 { -+ label = "APPSBL"; -+ reg = <0xf0000 0x80000>; -+ read-only; -+ }; -+ ART@170000 { -+ label = "ART"; -+ reg = <0x170000 0x10000>; -+ read-only; -+ }; -+ kernel@180000 { -+ label = "kernel"; -+ reg = <0x180000 0x400000>; -+ }; -+ rootfs@580000 { -+ label = "rootfs"; -+ reg = <0x580000 0x1600000>; -+ }; -+ firmware@180000 { -+ label = "firmware"; -+ reg = <0x180000 0x1a00000>; -+ }; -+ }; - }; diff --git a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch deleted file mode 100644 index 6c1ed49cde..0000000000 --- a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 9 Mar 2017 11:03:18 +0100 -Subject: [PATCH 69/69] arm: boot: add dts files - -Signed-off-by: John Crispin ---- - arch/arm/boot/dts/Makefile | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -697,7 +697,31 @@ dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8074-dragonboard.dtb \ - qcom-apq8084-ifc6540.dtb \ - qcom-apq8084-mtp.dtb \ -+ qcom-ipq4018-a42.dtb \ -+ qcom-ipq4018-ap120c-ac.dtb \ -+ qcom-ipq4018-ea6350v3.dtb \ -+ qcom-ipq4018-eap1300.dtb \ -+ qcom-ipq4018-ens620ext.dtb \ -+ qcom-ipq4018-ex6100v2.dtb \ -+ qcom-ipq4018-ex6150v2.dtb \ -+ qcom-ipq4018-fritzbox-4040.dtb \ -+ qcom-ipq4018-jalapeno.dtb \ -+ qcom-ipq4018-nbg6617.dtb \ -+ qcom-ipq4018-rt-ac58u.dtb \ -+ qcom-ipq4018-wre6606.dtb \ - qcom-ipq4019-ap.dk01.1-c1.dtb \ -+ qcom-ipq4019-a62.dtb \ -+ qcom-ipq4019-ap.dk04.1-c1.dtb \ -+ qcom-ipq4019-fritzbox-7530.dtb \ -+ qcom-ipq4019-fritzrepeater-1200.dtb \ -+ qcom-ipq4019-fritzrepeater-3000.dtb \ -+ qcom-ipq4019-ea8300.dtb \ -+ qcom-ipq4019-map-ac2200.dtb \ -+ qcom-ipq4019-e2600ac-c1.dtb \ -+ qcom-ipq4019-e2600ac-c2.dtb \ -+ qcom-ipq4028-wpj428.dtb \ -+ qcom-ipq4029-gl-b1300.dtb \ -+ qcom-ipq4029-mr33.dtb \ - qcom-ipq8064-ap148.dtb \ - qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ diff --git a/target/linux/ipq40xx/patches-4.14/997-device_tree_cmdline.patch b/target/linux/ipq40xx/patches-4.14/997-device_tree_cmdline.patch deleted file mode 100644 index 8b5e64a2d4..0000000000 --- a/target/linux/ipq40xx/patches-4.14/997-device_tree_cmdline.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/of/fdt.c -+++ b/drivers/of/fdt.c -@@ -1130,6 +1130,9 @@ int __init early_init_dt_scan_chosen(uns - p = of_get_flat_dt_prop(node, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); -+ p = of_get_flat_dt_prop(node, "bootargs-append", &l); -+ if (p != NULL && l > 0) -+ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE)); - - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else -- 2.25.1