From 97cb092763714459b9fa569fbe976cb341c4c4c5 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Fri, 11 Mar 2016 22:07:30 -0700 Subject: [PATCH] x86: broadwell: Add video support Add a video driver for Intel's broadwell integrated graphics controller. This uses a binary blob for most init, with the driver just performing a few basic tasks. This driver supports VESA as the mode-setting mechanism. Since most boards don't support driver model yet with VESA, a special case is added to the Kconfig for broadwell. Eventually all boards will use driver model and this can be removed. Signed-off-by: Simon Glass Acked-by: Bin Meng --- drivers/video/Kconfig | 14 +- drivers/video/Makefile | 2 + drivers/video/broadwell_igd.c | 797 ++++++++++++++++++++++++++++++++++ drivers/video/i915_reg.h | 362 +++++++++++++++ 4 files changed, 1174 insertions(+), 1 deletion(-) create mode 100644 drivers/video/broadwell_igd.c create mode 100644 drivers/video/i915_reg.h diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index ff4179fcd8..8361a717e7 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -112,7 +112,7 @@ config VIDEO_VESA config FRAMEBUFFER_SET_VESA_MODE bool "Set framebuffer graphics resolution" - depends on VIDEO_VESA + depends on VIDEO_VESA || VIDEO_BROADWELL_IGD help Set VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console) @@ -362,6 +362,18 @@ config DISPLAY The devices provide a simple interface to start up the display, read display information and enable it. +config VIDEO_BROADWELL_IGD + bool "Enable Intel Broadwell integrated graphics device" + depends on X86 + help + This enabled support for integrated graphics on Intel broadwell + devices. Initialisation is mostly performed by a VGA boot ROM, with + some setup handled by U-Boot itself. The graphics adaptor works as + a VESA device and supports LCD panels, eDP and LVDS outputs. + Configuration of most aspects of device operation is performed using + a special tool which configures the VGA ROM, but the graphics + resolution can be selected in U-Boot. + config VIDEO_ROCKCHIP bool "Enable Rockchip video support" depends on DM_VIDEO diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 9b635fc403..2fd0891e5d 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -19,6 +19,8 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/ endif +obj-$(CONFIG_VIDEO_BROADWELL_IGD) += broadwell_igd.o + obj-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o diff --git a/drivers/video/broadwell_igd.c b/drivers/video/broadwell_igd.c new file mode 100644 index 0000000000..ce4f296d0a --- /dev/null +++ b/drivers/video/broadwell_igd.c @@ -0,0 +1,797 @@ +/* + * From coreboot src/soc/intel/broadwell/igd.c + * + * Copyright (C) 2016 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "i915_reg.h" + +struct broadwell_igd_priv { + GraphicDevice ctfb; + u8 *regs; +}; + +struct broadwell_igd_plat { + u32 dp_hotplug[3]; + + int port_select; + int power_up_delay; + int power_backlight_on_delay; + int power_down_delay; + int power_backlight_off_delay; + int power_cycle_delay; + int cpu_backlight; + int pch_backlight; + int cdclk; + int pre_graphics_delay; +}; + +#define GT_RETRY 1000 +#define GT_CDCLK_337 0 +#define GT_CDCLK_450 1 +#define GT_CDCLK_540 2 +#define GT_CDCLK_675 3 + +u32 board_map_oprom_vendev(u32 vendev) +{ + return SA_IGD_OPROM_VENDEV; +} + +static int poll32(u8 *addr, uint mask, uint value) +{ + ulong start; + + start = get_timer(0); + debug("%s: addr %p = %x\n", __func__, addr, readl(addr)); + while ((readl(addr) & mask) != value) { + if (get_timer(start) > GT_RETRY) { + debug("poll32: timeout: %x\n", readl(addr)); + return -ETIMEDOUT; + } + } + + return 0; +} + +static int haswell_early_init(struct udevice *dev) +{ + struct broadwell_igd_priv *priv = dev_get_priv(dev); + u8 *regs = priv->regs; + int ret; + + /* Enable Force Wake */ + writel(0x00000020, regs + 0xa180); + writel(0x00010001, regs + 0xa188); + ret = poll32(regs + 0x130044, 1, 1); + if (ret) + goto err; + + /* Enable Counters */ + setbits_le32(regs + 0xa248, 0x00000016); + + /* GFXPAUSE settings */ + writel(0x00070020, regs + 0xa000); + + /* ECO Settings */ + clrsetbits_le32(regs + 0xa180, ~0xff3fffff, 0x15000000); + + /* Enable DOP Clock Gating */ + writel(0x000003fd, regs + 0x9424); + + /* Enable Unit Level Clock Gating */ + writel(0x00000080, regs + 0x9400); + writel(0x40401000, regs + 0x9404); + writel(0x00000000, regs + 0x9408); + writel(0x02000001, regs + 0x940c); + + /* + * RC6 Settings + */ + + /* Wake Rate Limits */ + setbits_le32(regs + 0xa090, 0x00000000); + setbits_le32(regs + 0xa098, 0x03e80000); + setbits_le32(regs + 0xa09c, 0x00280000); + setbits_le32(regs + 0xa0a8, 0x0001e848); + setbits_le32(regs + 0xa0ac, 0x00000019); + + /* Render/Video/Blitter Idle Max Count */ + writel(0x0000000a, regs + 0x02054); + writel(0x0000000a, regs + 0x12054); + writel(0x0000000a, regs + 0x22054); + writel(0x0000000a, regs + 0x1a054); + + /* RC Sleep / RCx Thresholds */ + setbits_le32(regs + 0xa0b0, 0x00000000); + setbits_le32(regs + 0xa0b4, 0x000003e8); + setbits_le32(regs + 0xa0b8, 0x0000c350); + + /* RP Settings */ + setbits_le32(regs + 0xa010, 0x000f4240); + setbits_le32(regs + 0xa014, 0x12060000); + setbits_le32(regs + 0xa02c, 0x0000e808); + setbits_le32(regs + 0xa030, 0x0003bd08); + setbits_le32(regs + 0xa068, 0x000101d0); + setbits_le32(regs + 0xa06c, 0x00055730); + setbits_le32(regs + 0xa070, 0x0000000a); + + /* RP Control */ + writel(0x00000b92, regs + 0xa024); + + /* HW RC6 Control */ + writel(0x88040000, regs + 0xa090); + + /* Video Frequency Request */ + writel(0x08000000, regs + 0xa00c); + + /* Set RC6 VIDs */ + ret = poll32(regs + 0x138124, (1 << 31), 0); + if (ret) + goto err; + writel(0, regs + 0x138128); + writel(0x80000004, regs + 0x138124); + ret = poll32(regs + 0x138124, (1 << 31), 0); + if (ret) + goto err; + + /* Enable PM Interrupts */ + writel(0x03000076, regs + 0x4402c); + + /* Enable RC6 in idle */ + writel(0x00040000, regs + 0xa094); + + return 0; +err: + debug("%s: ret=%d\n", __func__, ret); + return ret; +}; + +static int haswell_late_init(struct udevice *dev) +{ + struct broadwell_igd_priv *priv = dev_get_priv(dev); + u8 *regs = priv->regs; + int ret; + + /* Lock settings */ + setbits_le32(regs + 0x0a248, (1 << 31)); + setbits_le32(regs + 0x0a004, (1 << 4)); + setbits_le32(regs + 0x0a080, (1 << 2)); + setbits_le32(regs + 0x0a180, (1 << 31)); + + /* Disable Force Wake */ + writel(0x00010000, regs + 0xa188); + ret = poll32(regs + 0x130044, 1, 0); + if (ret) + goto err; + writel(0x00000001, regs + 0xa188); + + /* Enable power well for DP and Audio */ + setbits_le32(regs + 0x45400, (1 << 31)); + ret = poll32(regs + 0x45400, 1 << 30, 1 << 30); + if (ret) + goto err; + + return 0; +err: + debug("%s: ret=%d\n", __func__, ret); + return ret; +}; + +static int broadwell_early_init(struct udevice *dev) +{ + struct broadwell_igd_priv *priv = dev_get_priv(dev); + u8 *regs = priv->regs; + int ret; + + /* Enable Force Wake */ + writel(0x00010001, regs + 0xa188); + ret = poll32(regs + 0x130044, 1, 1); + if (ret) + goto err; + + /* Enable push bus metric control and shift */ + writel(0x00000004, regs + 0xa248); + writel(0x000000ff, regs + 0xa250); + writel(0x00000010, regs + 0xa25c); + + /* GFXPAUSE settings (set based on stepping) */ + + /* ECO Settings */ + writel(0x45200000, regs + 0xa180); + + /* Enable DOP Clock Gating */ + writel(0x000000fd, regs + 0x9424); + + /* Enable Unit Level Clock Gating */ + writel(0x00000000, regs + 0x9400); + writel(0x40401000, regs + 0x9404); + writel(0x00000000, regs + 0x9408); + writel(0x02000001, regs + 0x940c); + writel(0x0000000a, regs + 0x1a054); + + /* Video Frequency Request */ + writel(0x08000000, regs + 0xa00c); + + writel(0x00000009, regs + 0x138158); + writel(0x0000000d, regs + 0x13815c); + + /* + * RC6 Settings + */ + + /* Wake Rate Limits */ + clrsetbits_le32(regs + 0x0a090, ~0, 0); + setbits_le32(regs + 0x0a098, 0x03e80000); + setbits_le32(regs + 0x0a09c, 0x00280000); + setbits_le32(regs + 0x0a0a8, 0x0001e848); + setbits_le32(regs + 0x0a0ac, 0x00000019); + + /* Render/Video/Blitter Idle Max Count */ + writel(0x0000000a, regs + 0x02054); + writel(0x0000000a, regs + 0x12054); + writel(0x0000000a, regs + 0x22054); + + /* RC Sleep / RCx Thresholds */ + setbits_le32(regs + 0x0a0b0, 0x00000000); + setbits_le32(regs + 0x0a0b8, 0x00000271); + + /* RP Settings */ + setbits_le32(regs + 0x0a010, 0x000f4240); + setbits_le32(regs + 0x0a014, 0x12060000); + setbits_le32(regs + 0x0a02c, 0x0000e808); + setbits_le32(regs + 0x0a030, 0x0003bd08); + setbits_le32(regs + 0x0a068, 0x000101d0); + setbits_le32(regs + 0x0a06c, 0x00055730); + setbits_le32(regs + 0x0a070, 0x0000000a); + setbits_le32(regs + 0x0a168, 0x00000006); + + /* RP Control */ + writel(0x00000b92, regs + 0xa024); + + /* HW RC6 Control */ + writel(0x90040000, regs + 0xa090); + + /* Set RC6 VIDs */ + ret = poll32(regs + 0x138124, (1 << 31), 0); + if (ret) + goto err; + writel(0, regs + 0x138128); + writel(0x80000004, regs + 0x138124); + ret = poll32(regs + 0x138124, (1 << 31), 0); + if (ret) + goto err; + + /* Enable PM Interrupts */ + writel(0x03000076, regs + 0x4402c); + + /* Enable RC6 in idle */ + writel(0x00040000, regs + 0xa094); + + return 0; +err: + debug("%s: ret=%d\n", __func__, ret); + return ret; +} + +static int broadwell_late_init(struct udevice *dev) +{ + struct broadwell_igd_priv *priv = dev_get_priv(dev); + u8 *regs = priv->regs; + int ret; + + /* Lock settings */ + setbits_le32(regs + 0x0a248, 1 << 31); + setbits_le32(regs + 0x0a000, 1 << 18); + setbits_le32(regs + 0x0a180, 1 << 31); + + /* Disable Force Wake */ + writel(0x00010000, regs + 0xa188); + ret = poll32(regs + 0x130044, 1, 0); + if (ret) + goto err; + + /* Enable power well for DP and Audio */ + setbits_le32(regs + 0x45400, 1 << 31); + ret = poll32(regs + 0x45400, 1 << 30, 1 << 30); + if (ret) + goto err; + + return 0; +err: + debug("%s: ret=%d\n", __func__, ret); + return ret; +}; + + +static unsigned long gtt_read(struct broadwell_igd_priv *priv, + unsigned long reg) +{ + u32 val; + + val = readl(priv->regs + reg); + return val; +} + +static void gtt_write(struct broadwell_igd_priv *priv, unsigned long reg, + unsigned long data) +{ + writel(data, priv->regs + reg); +} + +static inline void gtt_clrsetbits(struct broadwell_igd_priv *priv, u32 reg, + u32 bic, u32 or) +{ + clrsetbits_le32(priv->regs + reg, bic, or); +} + +static int gtt_poll(struct broadwell_igd_priv *priv, u32 reg, u32 mask, + u32 value) +{ + unsigned try = GT_RETRY; + u32 data; + + while (try--) { + data = gtt_read(priv, reg); + if ((data & mask) == value) + return 0; + udelay(10); + } + + debug("GT init timeout\n"); + return -ETIMEDOUT; +} + +static void igd_setup_panel(struct udevice *dev) +{ + struct broadwell_igd_plat *plat = dev_get_platdata(dev); + struct broadwell_igd_priv *priv = dev_get_priv(dev); + u32 reg32; + + /* Setup Digital Port Hotplug */ + reg32 = (plat->dp_hotplug[0] & 0x7) << 2; + reg32 |= (plat->dp_hotplug[1] & 0x7) << 10; + reg32 |= (plat->dp_hotplug[2] & 0x7) << 18; + gtt_write(priv, PCH_PORT_HOTPLUG, reg32); + + /* Setup Panel Power On Delays */ + reg32 = (plat->port_select & 0x3) << 30; + reg32 |= (plat->power_up_delay & 0x1fff) << 16; + reg32 |= (plat->power_backlight_on_delay & 0x1fff); + gtt_write(priv, PCH_PP_ON_DELAYS, reg32); + + /* Setup Panel Power Off Delays */ + reg32 = (plat->power_down_delay & 0x1fff) << 16; + reg32 |= (plat->power_backlight_off_delay & 0x1fff); + gtt_write(priv, PCH_PP_OFF_DELAYS, reg32); + + /* Setup Panel Power Cycle Delay */ + if (plat->power_cycle_delay) { + reg32 = gtt_read(priv, PCH_PP_DIVISOR); + reg32 &= ~0xff; + reg32 |= plat->power_cycle_delay & 0xff; + gtt_write(priv, PCH_PP_DIVISOR, reg32); + } + + /* Enable Backlight if needed */ + if (plat->cpu_backlight) { + gtt_write(priv, BLC_PWM_CPU_CTL2, BLC_PWM2_ENABLE); + gtt_write(priv, BLC_PWM_CPU_CTL, plat->cpu_backlight); + } + if (plat->pch_backlight) { + gtt_write(priv, BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE); + gtt_write(priv, BLC_PWM_PCH_CTL2, plat->pch_backlight); + } +} + +static int igd_cdclk_init_haswell(struct udevice *dev) +{ + struct broadwell_igd_plat *plat = dev_get_platdata(dev); + struct broadwell_igd_priv *priv = dev_get_priv(dev); + int cdclk = plat->cdclk; + u16 devid; + int gpu_is_ulx = 0; + u32 dpdiv, lpcll; + int ret; + + dm_pci_read_config16(dev, PCI_DEVICE_ID, &devid); + + /* Check for ULX GT1 or GT2 */ + if (devid == 0x0a0e || devid == 0x0a1e) + gpu_is_ulx = 1; + + /* 675MHz is not supported on haswell */ + if (cdclk == GT_CDCLK_675) + cdclk = GT_CDCLK_337; + + /* If CD clock is fixed or ULT then set to 450MHz */ + if ((gtt_read(priv, 0x42014) & 0x1000000) || cpu_is_ult()) + cdclk = GT_CDCLK_450; + + /* 540MHz is not supported on ULX */ + if (gpu_is_ulx && cdclk == GT_CDCLK_540) + cdclk = GT_CDCLK_337; + + /* 337.5MHz is not supported on non-ULT/ULX */ + if (!gpu_is_ulx && !cpu_is_ult() && cdclk == GT_CDCLK_337) + cdclk = GT_CDCLK_450; + + /* Set variables based on CD Clock setting */ + switch (cdclk) { + case GT_CDCLK_337: + dpdiv = 169; + lpcll = (1 << 26); + break; + case GT_CDCLK_450: + dpdiv = 225; + lpcll = 0; + break; + case GT_CDCLK_540: + dpdiv = 270; + lpcll = (1 << 26); + break; + default: + ret = -EDOM; + goto err; + } + + /* Set LPCLL_CTL CD Clock Frequency Select */ + gtt_clrsetbits(priv, 0x130040, ~0xf3ffffff, lpcll); + + /* ULX: Inform power controller of selected frequency */ + if (gpu_is_ulx) { + if (cdclk == GT_CDCLK_450) + gtt_write(priv, 0x138128, 0x00000000); /* 450MHz */ + else + gtt_write(priv, 0x138128, 0x00000001); /* 337.5MHz */ + gtt_write(priv, 0x13812c, 0x00000000); + gtt_write(priv, 0x138124, 0x80000017); + } + + /* Set CPU DP AUX 2X bit clock dividers */ + gtt_clrsetbits(priv, 0x64010, ~0xfffff800, dpdiv); + gtt_clrsetbits(priv, 0x64810, ~0xfffff800, dpdiv); + + return 0; +err: + debug("%s: ret=%d\n", __func__, ret); + return ret; +} + +static int igd_cdclk_init_broadwell(struct udevice *dev) +{ + struct broadwell_igd_plat *plat = dev_get_platdata(dev); + struct broadwell_igd_priv *priv = dev_get_priv(dev); + int cdclk = plat->cdclk; + u32 dpdiv, lpcll, pwctl, cdset; + int ret; + + /* Inform power controller of upcoming frequency change */ + gtt_write(priv, 0x138128, 0); + gtt_write(priv, 0x13812c, 0); + gtt_write(priv, 0x138124, 0x80000018); + + /* Poll GT driver mailbox for run/busy clear */ + if (gtt_poll(priv, 0x138124, 1 << 31, 0 << 31)) + cdclk = GT_CDCLK_450; + + if (gtt_read(priv, 0x42014) & 0x1000000) { + /* If CD clock is fixed then set to 450MHz */ + cdclk = GT_CDCLK_450; + } else { + /* Program CD clock to highest supported freq */ + if (cpu_is_ult()) + cdclk = GT_CDCLK_540; + else + cdclk = GT_CDCLK_675; + } + + /* CD clock frequency 675MHz not supported on ULT */ + if (cpu_is_ult() && cdclk == GT_CDCLK_675) + cdclk = GT_CDCLK_540; + + /* Set variables based on CD Clock setting */ + switch (cdclk) { + case GT_CDCLK_337: + cdset = 337; + lpcll = (1 << 27); + pwctl = 2; + dpdiv = 169; + break; + case GT_CDCLK_450: + cdset = 449; + lpcll = 0; + pwctl = 0; + dpdiv = 225; + break; + case GT_CDCLK_540: + cdset = 539; + lpcll = (1 << 26); + pwctl = 1; + dpdiv = 270; + break; + case GT_CDCLK_675: + cdset = 674; + lpcll = (1 << 26) | (1 << 27); + pwctl = 3; + dpdiv = 338; + break; + default: + ret = -EDOM; + goto err; + } + debug("%s: frequency = %d\n", __func__, cdclk); + + /* Set LPCLL_CTL CD Clock Frequency Select */ + gtt_clrsetbits(priv, 0x130040, ~0xf3ffffff, lpcll); + + /* Inform power controller of selected frequency */ + gtt_write(priv, 0x138128, pwctl); + gtt_write(priv, 0x13812c, 0); + gtt_write(priv, 0x138124, 0x80000017); + + /* Program CD Clock Frequency */ + gtt_clrsetbits(priv, 0x46200, ~0xfffffc00, cdset); + + /* Set CPU DP AUX 2X bit clock dividers */ + gtt_clrsetbits(priv, 0x64010, ~0xfffff800, dpdiv); + gtt_clrsetbits(priv, 0x64810, ~0xfffff800, dpdiv); + + return 0; +err: + debug("%s: ret=%d\n", __func__, ret); + return ret; +} + +u8 systemagent_revision(struct udevice *bus) +{ + ulong val; + + pci_bus_read_config(bus, PCI_BDF(0, 0, 0), PCI_REVISION_ID, &val, + PCI_SIZE_32); + + return val; +} + +static int igd_pre_init(struct udevice *dev, bool is_broadwell) +{ + struct broadwell_igd_plat *plat = dev_get_platdata(dev); + struct broadwell_igd_priv *priv = dev_get_priv(dev); + u32 rp1_gfx_freq; + int ret; + + mdelay(plat->pre_graphics_delay); + + /* Early init steps */ + if (is_broadwell) { + ret = broadwell_early_init(dev); + if (ret) + goto err; + + /* Set GFXPAUSE based on stepping */ + if (cpu_get_stepping() <= (CPUID_BROADWELL_E0 & 0xf) && + systemagent_revision(pci_get_controller(dev)) <= 9) { + gtt_write(priv, 0xa000, 0x300ff); + } else { + gtt_write(priv, 0xa000, 0x30020); + } + } else { + ret = haswell_early_init(dev); + if (ret) + goto err; + } + + /* Set RP1 graphics frequency */ + rp1_gfx_freq = (readl(MCHBAR_REG(0x5998)) >> 8) & 0xff; + gtt_write(priv, 0xa008, rp1_gfx_freq << 24); + + /* Post VBIOS panel setup */ + igd_setup_panel(dev); + + return 0; +err: + debug("%s: ret=%d\n", __func__, ret); + return ret; +} + +static int igd_post_init(struct udevice *dev, bool is_broadwell) +{ + int ret; + + /* Late init steps */ + if (is_broadwell) { + ret = igd_cdclk_init_broadwell(dev); + if (ret) + return ret; + ret = broadwell_late_init(dev); + if (ret) + return ret; + } else { + igd_cdclk_init_haswell(dev); + ret = haswell_late_init(dev); + if (ret) + return ret; + } + + return 0; +} + +static int broadwell_igd_int15_handler(void) +{ + int res = 0; + + debug("%s: INT15 function %04x!\n", __func__, M.x86.R_AX); + + switch (M.x86.R_AX) { + case 0x5f35: + /* + * Boot Display Device Hook: + * bit 0 = CRT + * bit 1 = TV (eDP) + * bit 2 = EFP + * bit 3 = LFP + * bit 4 = CRT2 + * bit 5 = TV2 (eDP) + * bit 6 = EFP2 + * bit 7 = LFP2 + */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x0000; /* Use video bios default */ + res = 1; + break; + default: + debug("Unknown INT15 function %04x!\n", M.x86.R_AX); + break; + } + + return res; +} + +static int broadwell_igd_probe(struct udevice *dev) +{ + struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); + struct video_priv *uc_priv = dev_get_uclass_priv(dev); + struct broadwell_igd_priv *priv = dev_get_priv(dev); + bool is_broadwell; + GraphicDevice *gdev = &priv->ctfb; + int bits_per_pixel; + int ret; + + if (!ll_boot_init()) { + /* + * If we are running from EFI or coreboot, this driver can't + * work. + */ + printf("Not available (previous bootloader prevents it)\n"); + return -EPERM; + } + is_broadwell = cpu_get_family_model() == BROADWELL_FAMILY_ULT; + bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display"); + debug("%s: is_broadwell=%d\n", __func__, is_broadwell); + ret = igd_pre_init(dev, is_broadwell); + if (!ret) { + ret = dm_pci_run_vga_bios(dev, broadwell_igd_int15_handler, + PCI_ROM_USE_NATIVE | + PCI_ROM_ALLOW_FALLBACK); + if (ret) { + printf("failed to run video BIOS: %d\n", ret); + ret = -EIO; + } + } + if (!ret) + ret = igd_post_init(dev, is_broadwell); + bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD); + if (ret) + return ret; + + if (vbe_get_video_info(gdev)) { + printf("No video mode configured\n"); + return -ENXIO; + } + + /* Use write-through for the graphics memory, 256MB */ + ret = mtrr_add_request(MTRR_TYPE_WRTHROUGH, gdev->pciBase, 256 << 20); + if (!ret) + ret = mtrr_commit(true); + if (ret && ret != -ENOSYS) { + printf("Failed to add MTRR: Display will be slow (err %d)\n", + ret); + } + + bits_per_pixel = gdev->gdfBytesPP * 8; + sprintf(gdev->modeIdent, "%dx%dx%d", gdev->winSizeX, gdev->winSizeY, + bits_per_pixel); + printf("%s\n", gdev->modeIdent); + uc_priv->xsize = gdev->winSizeX; + uc_priv->ysize = gdev->winSizeY; + uc_priv->bpix = ilog2(bits_per_pixel); + plat->base = gdev->pciBase; + plat->size = gdev->memSize; + debug("fb=%x, size %x, display size=%d %d %d\n", gdev->pciBase, + gdev->memSize, uc_priv->xsize, uc_priv->ysize, uc_priv->bpix); + + return 0; +} + +static int broadwell_igd_ofdata_to_platdata(struct udevice *dev) +{ + struct broadwell_igd_plat *plat = dev_get_platdata(dev); + struct broadwell_igd_priv *priv = dev_get_priv(dev); + int node = dev->of_offset; + const void *blob = gd->fdt_blob; + + if (fdtdec_get_int_array(blob, node, "intel,dp-hotplug", + plat->dp_hotplug, + ARRAY_SIZE(plat->dp_hotplug))) + return -EINVAL; + plat->port_select = fdtdec_get_int(blob, node, "intel,port-select", 0); + plat->power_cycle_delay = fdtdec_get_int(blob, node, + "intel,power-cycle-delay", 0); + plat->power_up_delay = fdtdec_get_int(blob, node, + "intel,power-up-delay", 0); + plat->power_down_delay = fdtdec_get_int(blob, node, + "intel,power-down-delay", 0); + plat->power_backlight_on_delay = fdtdec_get_int(blob, node, + "intel,power-backlight-on-delay", 0); + plat->power_backlight_off_delay = fdtdec_get_int(blob, node, + "intel,power-backlight-off-delay", 0); + plat->cpu_backlight = fdtdec_get_int(blob, node, + "intel,cpu-backlight", 0); + plat->pch_backlight = fdtdec_get_int(blob, node, + "intel,pch-backlight", 0); + plat->pre_graphics_delay = fdtdec_get_int(blob, node, + "intel,pre-graphics-delay", 0); + priv->regs = (u8 *)dm_pci_read_bar32(dev, 0); + debug("%s: regs at %p\n", __func__, priv->regs); + debug("dp_hotplug %d %d %d\n", plat->dp_hotplug[0], plat->dp_hotplug[1], + plat->dp_hotplug[2]); + debug("port_select = %d\n", plat->port_select); + debug("power_up_delay = %d\n", plat->power_up_delay); + debug("power_backlight_on_delay = %d\n", + plat->power_backlight_on_delay); + debug("power_down_delay = %d\n", plat->power_down_delay); + debug("power_backlight_off_delay = %d\n", + plat->power_backlight_off_delay); + debug("power_cycle_delay = %d\n", plat->power_cycle_delay); + debug("cpu_backlight = %x\n", plat->cpu_backlight); + debug("pch_backlight = %x\n", plat->pch_backlight); + debug("cdclk = %d\n", plat->cdclk); + debug("pre_graphics_delay = %d\n", plat->pre_graphics_delay); + + return 0; +} + +static const struct video_ops broadwell_igd_ops = { +}; + +static const struct udevice_id broadwell_igd_ids[] = { + { .compatible = "intel,broadwell-igd" }, + { } +}; + +U_BOOT_DRIVER(broadwell_igd) = { + .name = "broadwell_igd", + .id = UCLASS_VIDEO, + .of_match = broadwell_igd_ids, + .ops = &broadwell_igd_ops, + .ofdata_to_platdata = broadwell_igd_ofdata_to_platdata, + .probe = broadwell_igd_probe, + .priv_auto_alloc_size = sizeof(struct broadwell_igd_priv), + .platdata_auto_alloc_size = sizeof(struct broadwell_igd_plat), +}; diff --git a/drivers/video/i915_reg.h b/drivers/video/i915_reg.h new file mode 100644 index 0000000000..f540b15d6c --- /dev/null +++ b/drivers/video/i915_reg.h @@ -0,0 +1,362 @@ +/* + * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. + * All Rights Reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef _I915_REG_H_ +#define _I915_REG_H_ + +/* Hotplug control (945+ only) */ +#define PORT_HOTPLUG_EN 0x61110 +#define HDMIB_HOTPLUG_INT_EN (1 << 29) +#define DPB_HOTPLUG_INT_EN (1 << 29) +#define HDMIC_HOTPLUG_INT_EN (1 << 28) +#define DPC_HOTPLUG_INT_EN (1 << 28) +#define HDMID_HOTPLUG_INT_EN (1 << 27) +#define DPD_HOTPLUG_INT_EN (1 << 27) +#define SDVOB_HOTPLUG_INT_EN (1 << 26) +#define SDVOC_HOTPLUG_INT_EN (1 << 25) +#define TV_HOTPLUG_INT_EN (1 << 18) +#define CRT_HOTPLUG_INT_EN (1 << 9) +#define CRT_HOTPLUG_FORCE_DETECT (1 << 3) +#define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8) +/* must use period 64 on GM45 according to docs */ +#define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8) +#define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7) +#define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5) +#define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4) +#define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4) +#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2) +#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) + +/* Backlight control */ +#define BLC_PWM_CTL2 0x61250 /* 965+ only */ +#define BLM_PWM_ENABLE (1 << 31) +#define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ +#define BLM_PIPE_SELECT (1 << 29) +#define BLM_PIPE_SELECT_IVB (3 << 29) +#define BLM_PIPE_A (0 << 29) +#define BLM_PIPE_B (1 << 29) +#define BLM_PIPE_C (2 << 29) /* ivb + */ +#define BLM_PIPE(pipe) ((pipe) << 29) +#define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ +#define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) +#define BLM_PHASE_IN_ENABLE (1 << 25) +#define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24) +#define BLM_PHASE_IN_TIME_BASE_SHIFT (16) +#define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16) +#define BLM_PHASE_IN_COUNT_SHIFT (8) +#define BLM_PHASE_IN_COUNT_MASK (0xff << 8) +#define BLM_PHASE_IN_INCR_SHIFT (0) +#define BLM_PHASE_IN_INCR_MASK (0xff << 0) +#define BLC_PWM_CTL 0x61254 +/* + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) /* gen2 only */ +/* + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) +#define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) +#define BLM_POLARITY_PNV (1 << 0) /* pnv only */ + +#define BLC_HIST_CTL 0x61260 + +/* + * New registers for PCH-split platforms. Safe where new bits show up, the + * register layout machtes with gen4 BLC_PWM_CTL[12] + */ +#define BLC_PWM_CPU_CTL2 0x48250 +#define BLC_PWM2_ENABLE (1<<31) +#define BLC_PWM_CPU_CTL 0x48254 + +#define BLM_HIST_CTL 0x48260 +#define ENH_HIST_ENABLE (1<<31) +#define ENH_MODIF_TBL_ENABLE (1<<30) +#define ENH_PIPE_A_SELECT (0<<29) +#define ENH_PIPE_B_SELECT (1<<29) +#define ENH_PIPE(pipe) _PIPE(pipe, ENH_PIPE_A_SELECT, ENH_PIPE_B_SELECT) +#define HIST_MODE_YUV (0<<24) +#define HIST_MODE_HSV (1<<24) +#define ENH_MODE_DIRECT (0<<13) +#define ENH_MODE_ADDITIVE (1<<13) +#define ENH_MODE_MULTIPLICATIVE (2<<13) +#define BIN_REGISTER_SET (1<<11) +#define ENH_NUM_BINS 32 + +#define BLM_HIST_ENH 0x48264 + +#define BLM_HIST_GUARD_BAND 0x48268 +#define BLM_HIST_INTR_ENABLE (1<<31) +#define BLM_HIST_EVENT_STATUS (1<<30) +#define BLM_HIST_INTR_DELAY_MASK (0xFF<<22) +#define BLM_HIST_INTR_DELAY_SHIFT 22 + +/* + * PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is + * like the normal CTL from gen4 and earlier. Hooray for confusing naming. + */ +#define BLC_PWM_PCH_CTL1 0xc8250 +#define BLM_PCH_PWM_ENABLE (1 << 31) +#define BLM_PCH_OVERRIDE_ENABLE (1 << 30) +#define BLM_PCH_POLARITY (1 << 29) +#define BLC_PWM_PCH_CTL2 0xc8254 + +/* digital port hotplug */ +#define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */ +#define PORTD_HOTPLUG_ENABLE (1 << 20) +#define PORTD_PULSE_DURATION_2ms (0) +#define PORTD_PULSE_DURATION_4_5ms (1 << 18) +#define PORTD_PULSE_DURATION_6ms (2 << 18) +#define PORTD_PULSE_DURATION_100ms (3 << 18) +#define PORTD_PULSE_DURATION_MASK (3 << 18) +#define PORTD_HOTPLUG_NO_DETECT (0) +#define PORTD_HOTPLUG_SHORT_DETECT (1 << 16) +#define PORTD_HOTPLUG_LONG_DETECT (1 << 17) +#define PORTC_HOTPLUG_ENABLE (1 << 12) +#define PORTC_PULSE_DURATION_2ms (0) +#define PORTC_PULSE_DURATION_4_5ms (1 << 10) +#define PORTC_PULSE_DURATION_6ms (2 << 10) +#define PORTC_PULSE_DURATION_100ms (3 << 10) +#define PORTC_PULSE_DURATION_MASK (3 << 10) +#define PORTC_HOTPLUG_NO_DETECT (0) +#define PORTC_HOTPLUG_SHORT_DETECT (1 << 8) +#define PORTC_HOTPLUG_LONG_DETECT (1 << 9) +#define PORTB_HOTPLUG_ENABLE (1 << 4) +#define PORTB_PULSE_DURATION_2ms (0) +#define PORTB_PULSE_DURATION_4_5ms (1 << 2) +#define PORTB_PULSE_DURATION_6ms (2 << 2) +#define PORTB_PULSE_DURATION_100ms (3 << 2) +#define PORTB_PULSE_DURATION_MASK (3 << 2) +#define PORTB_HOTPLUG_NO_DETECT (0) +#define PORTB_HOTPLUG_SHORT_DETECT (1 << 0) +#define PORTB_HOTPLUG_LONG_DETECT (1 << 1) + +#define PCH_GPIOA 0xc5010 +#define PCH_GPIOB 0xc5014 +#define PCH_GPIOC 0xc5018 +#define PCH_GPIOD 0xc501c +#define PCH_GPIOE 0xc5020 +#define PCH_GPIOF 0xc5024 + +#define PCH_GMBUS0 0xc5100 +#define PCH_GMBUS1 0xc5104 +#define PCH_GMBUS2 0xc5108 +#define PCH_GMBUS3 0xc510c +#define PCH_GMBUS4 0xc5110 +#define PCH_GMBUS5 0xc5120 + +#define _PCH_DPLL_A 0xc6014 +#define _PCH_DPLL_B 0xc6018 +#define _PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B) + +#define _PCH_FPA0 0xc6040 +#define FP_CB_TUNE (0x3<<22) +#define _PCH_FPA1 0xc6044 +#define _PCH_FPB0 0xc6048 +#define _PCH_FPB1 0xc604c +#define _PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0) +#define _PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1) + +#define PCH_DPLL_TEST 0xc606c + +#define PCH_DREF_CONTROL 0xC6200 +#define DREF_CONTROL_MASK 0x7fc3 +#define DREF_CPU_SOURCE_OUTPUT_DISABLE (0<<13) +#define DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD (2<<13) +#define DREF_CPU_SOURCE_OUTPUT_NONSPREAD (3<<13) +#define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13) +#define DREF_SSC_SOURCE_DISABLE (0<<11) +#define DREF_SSC_SOURCE_ENABLE (2<<11) +#define DREF_SSC_SOURCE_MASK (3<<11) +#define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) +#define DREF_NONSPREAD_CK505_ENABLE (1<<9) +#define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) +#define DREF_NONSPREAD_SOURCE_MASK (3<<9) +#define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) +#define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) +#define DREF_SUPERSPREAD_SOURCE_MASK (3<<7) +#define DREF_SSC4_DOWNSPREAD (0<<6) +#define DREF_SSC4_CENTERSPREAD (1<<6) +#define DREF_SSC1_DISABLE (0<<1) +#define DREF_SSC1_ENABLE (1<<1) +#define DREF_SSC4_DISABLE (0) +#define DREF_SSC4_ENABLE (1) + +#define PCH_RAWCLK_FREQ 0xc6204 +#define FDL_TP1_TIMER_SHIFT 12 +#define FDL_TP1_TIMER_MASK (3<<12) +#define FDL_TP2_TIMER_SHIFT 10 +#define FDL_TP2_TIMER_MASK (3<<10) +#define RAWCLK_FREQ_MASK 0x3ff + +#define PCH_DPLL_TMR_CFG 0xc6208 + +#define PCH_SSC4_PARMS 0xc6210 +#define PCH_SSC4_AUX_PARMS 0xc6214 + +#define PCH_DPLL_SEL 0xc7000 +#define TRANSA_DPLL_ENABLE (1<<3) +#define TRANSA_DPLLB_SEL (1<<0) +#define TRANSA_DPLLA_SEL 0 +#define TRANSB_DPLL_ENABLE (1<<7) +#define TRANSB_DPLLB_SEL (1<<4) +#define TRANSB_DPLLA_SEL (0) +#define TRANSC_DPLL_ENABLE (1<<11) +#define TRANSC_DPLLB_SEL (1<<8) +#define TRANSC_DPLLA_SEL (0) + +/* transcoder */ + +#define _TRANS_HTOTAL_A 0xe0000 +#define TRANS_HTOTAL_SHIFT 16 +#define TRANS_HACTIVE_SHIFT 0 +#define _TRANS_HBLANK_A 0xe0004 +#define TRANS_HBLANK_END_SHIFT 16 +#define TRANS_HBLANK_START_SHIFT 0 +#define _TRANS_HSYNC_A 0xe0008 +#define TRANS_HSYNC_END_SHIFT 16 +#define TRANS_HSYNC_START_SHIFT 0 +#define _TRANS_VTOTAL_A 0xe000c +#define TRANS_VTOTAL_SHIFT 16 +#define TRANS_VACTIVE_SHIFT 0 +#define _TRANS_VBLANK_A 0xe0010 +#define TRANS_VBLANK_END_SHIFT 16 +#define TRANS_VBLANK_START_SHIFT 0 +#define _TRANS_VSYNC_A 0xe0014 +#define TRANS_VSYNC_END_SHIFT 16 +#define TRANS_VSYNC_START_SHIFT 0 +#define _TRANS_VSYNCSHIFT_A 0xe0028 + +#define _TRANSA_DATA_M1 0xe0030 +#define _TRANSA_DATA_N1 0xe0034 +#define _TRANSA_DATA_M2 0xe0038 +#define _TRANSA_DATA_N2 0xe003c +#define _TRANSA_DP_LINK_M1 0xe0040 +#define _TRANSA_DP_LINK_N1 0xe0044 +#define _TRANSA_DP_LINK_M2 0xe0048 +#define _TRANSA_DP_LINK_N2 0xe004c + +/* Per-transcoder DIP controls */ + +#define _VIDEO_DIP_CTL_A 0xe0200 +#define _VIDEO_DIP_DATA_A 0xe0208 +#define _VIDEO_DIP_GCP_A 0xe0210 + +#define _VIDEO_DIP_CTL_B 0xe1200 +#define _VIDEO_DIP_DATA_B 0xe1208 +#define _VIDEO_DIP_GCP_B 0xe1210 + +#define TVIDEO_DIP_CTL(pipe) _PIPE(pipe, _VIDEO_DIP_CTL_A, _VIDEO_DIP_CTL_B) +#define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B) +#define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B) + +#define VLV_VIDEO_DIP_CTL_A 0x60200 +#define VLV_VIDEO_DIP_DATA_A 0x60208 +#define VLV_VIDEO_DIP_GDCP_PAYLOAD_A 0x60210 + +#define VLV_VIDEO_DIP_CTL_B 0x61170 +#define VLV_VIDEO_DIP_DATA_B 0x61174 +#define VLV_VIDEO_DIP_GDCP_PAYLOAD_B 0x61178 + +#define VLV_TVIDEO_DIP_CTL(pipe) \ + _PIPE(pipe, VLV_VIDEO_DIP_CTL_A, VLV_VIDEO_DIP_CTL_B) +#define VLV_TVIDEO_DIP_DATA(pipe) \ + _PIPE(pipe, VLV_VIDEO_DIP_DATA_A, VLV_VIDEO_DIP_DATA_B) +#define VLV_TVIDEO_DIP_GCP(pipe) \ + _PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B) + +/* vlv has 2 sets of panel control regs. */ +#define PIPEA_PP_STATUS 0x61200 +#define PIPEA_PP_CONTROL 0x61204 +#define PIPEA_PP_ON_DELAYS 0x61208 +#define PIPEA_PP_OFF_DELAYS 0x6120c +#define PIPEA_PP_DIVISOR 0x61210 + +#define PIPEB_PP_STATUS 0x61300 +#define PIPEB_PP_CONTROL 0x61304 +#define PIPEB_PP_ON_DELAYS 0x61308 +#define PIPEB_PP_OFF_DELAYS 0x6130c +#define PIPEB_PP_DIVISOR 0x61310 + +#define PCH_PP_STATUS 0xc7200 +#define PCH_PP_CONTROL 0xc7204 +#define PANEL_UNLOCK_REGS (0xabcd << 16) +#define PANEL_UNLOCK_MASK (0xffff << 16) +#define EDP_FORCE_VDD (1 << 3) +#define EDP_BLC_ENABLE (1 << 2) +#define PANEL_POWER_RESET (1 << 1) +#define PANEL_POWER_OFF (0 << 0) +#define PANEL_POWER_ON (1 << 0) +#define PCH_PP_ON_DELAYS 0xc7208 +#define PANEL_PORT_SELECT_MASK (3 << 30) +#define PANEL_PORT_SELECT_LVDS (0 << 30) +#define PANEL_PORT_SELECT_DPA (1 << 30) +#define EDP_PANEL (1 << 30) +#define PANEL_PORT_SELECT_DPC (2 << 30) +#define PANEL_PORT_SELECT_DPD (3 << 30) +#define PANEL_POWER_UP_DELAY_MASK (0x1fff0000) +#define PANEL_POWER_UP_DELAY_SHIFT 16 +#define PANEL_LIGHT_ON_DELAY_MASK (0x1fff) +#define PANEL_LIGHT_ON_DELAY_SHIFT 0 + +#define PCH_PP_OFF_DELAYS 0xc720c +#define PANEL_POWER_PORT_SELECT_MASK (0x3 << 30) +#define PANEL_POWER_PORT_LVDS (0 << 30) +#define PANEL_POWER_PORT_DP_A (1 << 30) +#define PANEL_POWER_PORT_DP_C (2 << 30) +#define PANEL_POWER_PORT_DP_D (3 << 30) +#define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000) +#define PANEL_POWER_DOWN_DELAY_SHIFT 16 +#define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff) +#define PANEL_LIGHT_OFF_DELAY_SHIFT 0 + +#define PCH_PP_DIVISOR 0xc7210 +#define PP_REFERENCE_DIVIDER_MASK (0xffffff00) +#define PP_REFERENCE_DIVIDER_SHIFT 8 +#define PANEL_POWER_CYCLE_DELAY_MASK (0x1f) +#define PANEL_POWER_CYCLE_DELAY_SHIFT 0 + +#define PCH_DP_B 0xe4100 +#define PCH_DPB_AUX_CH_CTL 0xe4110 +#define PCH_DPB_AUX_CH_DATA1 0xe4114 +#define PCH_DPB_AUX_CH_DATA2 0xe4118 +#define PCH_DPB_AUX_CH_DATA3 0xe411c +#define PCH_DPB_AUX_CH_DATA4 0xe4120 +#define PCH_DPB_AUX_CH_DATA5 0xe4124 + +#define PCH_DP_C 0xe4200 +#define PCH_DPC_AUX_CH_CTL 0xe4210 +#define PCH_DPC_AUX_CH_DATA1 0xe4214 +#define PCH_DPC_AUX_CH_DATA2 0xe4218 +#define PCH_DPC_AUX_CH_DATA3 0xe421c +#define PCH_DPC_AUX_CH_DATA4 0xe4220 +#define PCH_DPC_AUX_CH_DATA5 0xe4224 + +#define PCH_DP_D 0xe4300 +#define PCH_DPD_AUX_CH_CTL 0xe4310 +#define PCH_DPD_AUX_CH_DATA1 0xe4314 +#define PCH_DPD_AUX_CH_DATA2 0xe4318 +#define PCH_DPD_AUX_CH_DATA3 0xe431c +#define PCH_DPD_AUX_CH_DATA4 0xe4320 +#define PCH_DPD_AUX_CH_DATA5 0xe4324 + +#endif /* _I915_REG_H_ */ -- 2.25.1