From 9628afa7f5cd6d752adc7bb77ea14fd639a66d03 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 11 Sep 2015 20:17:48 +0900 Subject: [PATCH] ARM: uniphier: remove ifdef CONFIG_{SOC} conditionals from sg-regs.h To achieve the complete run-time configuration by device trees, ifdef conditionals in header files are not preferable. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/include/mach/sg-regs.h | 40 ++++++--------- .../mach-uniphier/ph1-ld4/lowlevel_debug.S | 4 +- arch/arm/mach-uniphier/ph1-ld4/pinctrl.c | 46 ++++++++--------- .../mach-uniphier/ph1-pro4/lowlevel_debug.S | 4 +- arch/arm/mach-uniphier/ph1-pro4/pinctrl.c | 50 +++++++++---------- .../mach-uniphier/ph1-sld3/early_pinctrl.c | 12 ++--- .../mach-uniphier/ph1-sld3/lowlevel_debug.S | 4 +- arch/arm/mach-uniphier/ph1-sld3/pinctrl.c | 16 +++--- arch/arm/mach-uniphier/ph1-sld3/sbc_init.c | 2 +- .../mach-uniphier/ph1-sld8/lowlevel_debug.S | 4 +- arch/arm/mach-uniphier/ph1-sld8/pinctrl.c | 46 ++++++++--------- 11 files changed, 109 insertions(+), 119 deletions(-) diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index 43a6c35339..c886e1c655 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -53,24 +53,6 @@ /* Pin Control */ #define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000) -#if defined(CONFIG_MACH_PH1_PRO4) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8) -#elif defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \ - defined(CONFIG_MACH_PH1_SLD8) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4) -#endif - -#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_PRO4) -#define SG_PINSELBITS 4 -#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) -#define SG_PINSELBITS 8 -#endif - -#define SG_PINSEL_ADDR(n) (SG_PINCTRL((n) * (SG_PINSELBITS) / 32)) -#define SG_PINSEL_MASK(n) (~(((1 << (SG_PINSELBITS)) - 1) << \ - ((n) * (SG_PINSELBITS) % 32))) -#define SG_PINSEL_MODE(n, mode) ((mode) << ((n) * (SG_PINSELBITS) % 32)) - /* Only for PH1-Pro4 */ #define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700) @@ -98,11 +80,11 @@ #ifdef __ASSEMBLY__ - .macro set_pinsel, n, value, ra, rd - ldr \ra, =SG_PINSEL_ADDR(\n) + .macro sg_set_pinsel, pin, muxval, mux_bits, reg_stride, ra, rd + ldr \ra, =(SG_PINCTRL_BASE + \pin * \mux_bits / 32 * \reg_stride) ldr \rd, [\ra] - and \rd, \rd, #SG_PINSEL_MASK(\n) - orr \rd, \rd, #SG_PINSEL_MODE(\n, \value) + and \rd, \rd, #~(((1 << \mux_bits) - 1) << (\pin * \mux_bits % 32)) + orr \rd, \rd, #(\muxval << (\pin * \mux_bits % 32)) str \rd, [\ra] .endm @@ -111,10 +93,18 @@ #include #include -static inline void sg_set_pinsel(int n, int value) +static inline void sg_set_pinsel(unsigned pin, unsigned muxval, + unsigned mux_bits, unsigned reg_stride) { - writel((readl(SG_PINSEL_ADDR(n)) & SG_PINSEL_MASK(n)) - | SG_PINSEL_MODE(n, value), SG_PINSEL_ADDR(n)); + unsigned shift = pin * mux_bits % 32; + unsigned reg = SG_PINCTRL_BASE + pin * mux_bits / 32 * reg_stride; + u32 mask = (1U << mux_bits) - 1; + u32 tmp; + + tmp = readl(reg); + tmp &= ~(mask << shift); + tmp |= (mask & muxval) << shift; + writel(tmp, reg); } #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S index 7928c5c87c..fd393dcfb3 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S @@ -17,8 +17,8 @@ ENTRY(setup_lowlevel_debug) init_debug_uart r0, r1, r2 /* UART Port 0 */ - set_pinsel 85, 1, r0, r1 - set_pinsel 88, 1, r0, r1 + sg_set_pinsel 85, 1, 8, 4, r0, r1 + sg_set_pinsel 88, 1, 8, 4, r0, r1 ldr r0, =SG_IECTRL ldr r1, [r0] diff --git a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c index 20cc7b30c4..293a6ab423 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c @@ -14,32 +14,32 @@ void pin_init(void) /* Comment format: PAD Name -> Function Name */ #ifdef CONFIG_NAND_DENALI - sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */ - sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */ - sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */ - sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */ - sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */ - sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */ - sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */ - sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */ - sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */ - sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */ - sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */ - sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */ - sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */ - sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */ + sg_set_pinsel(158, 0, 8, 4); /* XNFRE -> XNFRE_GB */ + sg_set_pinsel(159, 0, 8, 4); /* XNFWE -> XNFWE_GB */ + sg_set_pinsel(160, 0, 8, 4); /* XFALE -> NFALE_GB */ + sg_set_pinsel(161, 0, 8, 4); /* XFCLE -> NFCLE_GB */ + sg_set_pinsel(162, 0, 8, 4); /* XNFWP -> XFNWP_GB */ + sg_set_pinsel(163, 0, 8, 4); /* XNFCE0 -> XNFCE0_GB */ + sg_set_pinsel(164, 0, 8, 4); /* NANDRYBY0 -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* MMCCLK -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* MMCCMD -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* MMCDAT0 -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* MMCDAT1 -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* MMCDAT2 -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* MMCDAT3 -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* MMCDAT4 -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* MMCDAT5 -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* MMCDAT6 -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* MMCDAT7 -> NFD7_GB */ #endif #ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */ - /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */ + sg_set_pinsel(53, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(54, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(55, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(56, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */ + /* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */ #endif tmp = readl(SG_IECTRL); diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S index fcaf6d12d8..19bef2a157 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S @@ -23,8 +23,8 @@ ENTRY(setup_lowlevel_debug) init_debug_uart r0, r1, r2 /* UART Port 0 */ - set_pinsel 127, 0, r0, r1 - set_pinsel 128, 0, r0, r1 + sg_set_pinsel 127, 0, 4, 8, r0, r1 + sg_set_pinsel 128, 0, 4, 8, r0, r1 ldr r0, =SG_LOADPINCTRL mov r1, #1 diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c index 2a5a296f88..bfaff4fea9 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c @@ -12,37 +12,37 @@ void pin_init(void) /* Comment format: PAD Name -> Function Name */ #ifdef CONFIG_NAND_DENALI - sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ - sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ - sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ - sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ - sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ - sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ - sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ - sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ - sg_set_pinsel(48, 0); /* NFALE -> NFALE */ - sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ - sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ - sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ - sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ - sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ - sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ - /* sg_set_pinsel(131, 1); */ /* RXD2 -> NRYBY1 */ - /* sg_set_pinsel(132, 1); */ /* TXD2 -> XNFCE1 */ + sg_set_pinsel(40, 0, 4, 8); /* NFD0 -> NFD0 */ + sg_set_pinsel(41, 0, 4, 8); /* NFD1 -> NFD1 */ + sg_set_pinsel(42, 0, 4, 8); /* NFD2 -> NFD2 */ + sg_set_pinsel(43, 0, 4, 8); /* NFD3 -> NFD3 */ + sg_set_pinsel(44, 0, 4, 8); /* NFD4 -> NFD4 */ + sg_set_pinsel(45, 0, 4, 8); /* NFD5 -> NFD5 */ + sg_set_pinsel(46, 0, 4, 8); /* NFD6 -> NFD6 */ + sg_set_pinsel(47, 0, 4, 8); /* NFD7 -> NFD7 */ + sg_set_pinsel(48, 0, 4, 8); /* NFALE -> NFALE */ + sg_set_pinsel(49, 0, 4, 8); /* NFCLE -> NFCLE */ + sg_set_pinsel(50, 0, 4, 8); /* XNFRE -> XNFRE */ + sg_set_pinsel(51, 0, 4, 8); /* XNFWE -> XNFWE */ + sg_set_pinsel(52, 0, 4, 8); /* XNFWP -> XNFWP */ + sg_set_pinsel(53, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(54, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ + /* sg_set_pinsel(131, 1, 4, 8); */ /* RXD2 -> NRYBY1 */ + /* sg_set_pinsel(132, 1, 4, 8); */ /* TXD2 -> XNFCE1 */ #endif #ifdef CONFIG_USB_XHCI_UNIPHIER - sg_set_pinsel(180, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(181, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(182, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(183, 0); /* USB1OD -> USB1OD */ + sg_set_pinsel(180, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(181, 0, 4, 8); /* USB0OD -> USB0OD */ + sg_set_pinsel(182, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(183, 0, 4, 8); /* USB1OD -> USB1OD */ #endif #ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ - sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ - sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ - sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ + sg_set_pinsel(184, 0, 4, 8); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(185, 0, 4, 8); /* USB2OD -> USB2OD */ + sg_set_pinsel(187, 0, 4, 8); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(188, 0, 4, 8); /* USB3OD -> USB3OD */ #endif writel(1, SG_LOADPINCTRL); diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c index f113e658d8..f6ceef5f1c 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c @@ -11,13 +11,13 @@ void early_pin_init(void) /* Comment format: PAD Name -> Function Name */ #ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(63, 0); /* RXD0 */ - sg_set_pinsel(64, 1); /* TXD0 */ + sg_set_pinsel(63, 0, 4, 4); /* RXD0 */ + sg_set_pinsel(64, 1, 4, 4); /* TXD0 */ - sg_set_pinsel(65, 0); /* RXD1 */ - sg_set_pinsel(66, 1); /* TXD1 */ + sg_set_pinsel(65, 0, 4, 4); /* RXD1 */ + sg_set_pinsel(66, 1, 4, 4); /* TXD1 */ - sg_set_pinsel(96, 2); /* RXD2 */ - sg_set_pinsel(102, 2); /* TXD2 */ + sg_set_pinsel(96, 2, 4, 4); /* RXD2 */ + sg_set_pinsel(102, 2, 4, 4); /* TXD2 */ #endif } diff --git a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S index 41f67b7a8f..ee2eae6bf7 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S @@ -26,8 +26,8 @@ ENTRY(setup_lowlevel_debug) init_debug_uart r0, r1, r2 - set_pinsel 63, 0, r0, r1 - set_pinsel 64, 1, r0, r1 + sg_set_pinsel 63, 0, 4, 4, r0, r1 + sg_set_pinsel 64, 1, 4, 4, r0, r1 mov pc, lr ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c index 5ecbe4cca3..dea938ed2f 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c @@ -9,16 +9,16 @@ void pin_init(void) { #ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(13, 0); /* USB0OC */ - sg_set_pinsel(14, 1); /* USB0VBUS */ + sg_set_pinsel(13, 0, 4, 4); /* USB0OC */ + sg_set_pinsel(14, 1, 4, 4); /* USB0VBUS */ - sg_set_pinsel(15, 0); /* USB1OC */ - sg_set_pinsel(16, 1); /* USB1VBUS */ + sg_set_pinsel(15, 0, 4, 4); /* USB1OC */ + sg_set_pinsel(16, 1, 4, 4); /* USB1VBUS */ - sg_set_pinsel(17, 0); /* USB2OC */ - sg_set_pinsel(18, 1); /* USB2VBUS */ + sg_set_pinsel(17, 0, 4, 4); /* USB2OC */ + sg_set_pinsel(18, 1, 4, 4); /* USB2VBUS */ - sg_set_pinsel(19, 0); /* USB3OC */ - sg_set_pinsel(20, 1); /* USB3VBUS */ + sg_set_pinsel(19, 0, 4, 4); /* USB3OC */ + sg_set_pinsel(20, 1, 4, 4); /* USB3VBUS */ #endif } diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c index bafab4b0e6..3e62121ba9 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c +++ b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c @@ -41,5 +41,5 @@ void sbc_init(void) writel(0x0200be01, SBBASE1); } - sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ + sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */ } diff --git a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S index 73f0f63eba..3ada4c9948 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S @@ -17,8 +17,8 @@ ENTRY(setup_lowlevel_debug) init_debug_uart r0, r1, r2 /* UART Port 0 */ - set_pinsel 70, 3, r0, r1 - set_pinsel 71, 3, r0, r1 + sg_set_pinsel 70, 3, 8, 4, r0, r1 + sg_set_pinsel 71, 3, 8, 4, r0, r1 ldr r0, =SG_IECTRL ldr r1, [r0] diff --git a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c index 98da1f9fe9..1b64414553 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c @@ -12,31 +12,31 @@ void pin_init(void) /* Comment format: PAD Name -> Function Name */ #ifdef CONFIG_NAND_DENALI - sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */ - sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */ - sg_set_pinsel(17, 0); /* XFALE_GB -> NFALE_GB */ - sg_set_pinsel(18, 0); /* XFCLE_GB -> NFCLE_GB */ - sg_set_pinsel(19, 0); /* XNFWP_GB -> XFNWP_GB */ - sg_set_pinsel(20, 0); /* XNFCE0_GB -> XNFCE0_GB */ - sg_set_pinsel(21, 0); /* NANDRYBY0_GB -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* XFNCE1_GB -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* NANDRYBY1_GB -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* NFD0_GB -> NFD0_GB */ - sg_set_pinsel(25, 0); /* NFD1_GB -> NFD1_GB */ - sg_set_pinsel(26, 0); /* NFD2_GB -> NFD2_GB */ - sg_set_pinsel(27, 0); /* NFD3_GB -> NFD3_GB */ - sg_set_pinsel(28, 0); /* NFD4_GB -> NFD4_GB */ - sg_set_pinsel(29, 0); /* NFD5_GB -> NFD5_GB */ - sg_set_pinsel(30, 0); /* NFD6_GB -> NFD6_GB */ - sg_set_pinsel(31, 0); /* NFD7_GB -> NFD7_GB */ + sg_set_pinsel(15, 0, 8, 4); /* XNFRE_GB -> XNFRE_GB */ + sg_set_pinsel(16, 0, 8, 4); /* XNFWE_GB -> XNFWE_GB */ + sg_set_pinsel(17, 0, 8, 4); /* XFALE_GB -> NFALE_GB */ + sg_set_pinsel(18, 0, 8, 4); /* XFCLE_GB -> NFCLE_GB */ + sg_set_pinsel(19, 0, 8, 4); /* XNFWP_GB -> XFNWP_GB */ + sg_set_pinsel(20, 0, 8, 4); /* XNFCE0_GB -> XNFCE0_GB */ + sg_set_pinsel(21, 0, 8, 4); /* NANDRYBY0_GB -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* XFNCE1_GB -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* NANDRYBY1_GB -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* NFD0_GB -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* NFD1_GB -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* NFD2_GB -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* NFD3_GB -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* NFD4_GB -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* NFD5_GB -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* NFD6_GB -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* NFD7_GB -> NFD7_GB */ #endif #ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(41, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(42, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(43, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(44, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(114, 1); */ /* TXD1 -> USB2VBUS (shared with UART) */ - /* sg_set_pinsel(115, 1); */ /* RXD1 -> USB2OD */ + sg_set_pinsel(41, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(42, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(43, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(44, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ + /* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */ #endif } -- 2.25.1