From 9601e6a0e2d0dd1b08ffc7d0ea4ef135dee1e0cf Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Sun, 26 Nov 2017 01:42:50 +0900 Subject: [PATCH] ramips: add missing reset button for Nexx WT1520 This commit adds missing the GPIO key used as reset button. Nexx WT1520 has a GPIO key for factory reset, but it's not defined in WT1520.dtsi and cannot use it. Drop the UART (full) from the device tree source file, it was never used for this board. Adjust the kernel bootargs accordingly. Signed-off-by: INAGAKI Hiroshi [add note about dropped UART (full) to the commit message] Signed-off-by: Mathias Kresin --- target/linux/ramips/dts/WT1520.dtsi | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/target/linux/ramips/dts/WT1520.dtsi b/target/linux/ramips/dts/WT1520.dtsi index 4c889d1d1d..0586c22684 100644 --- a/target/linux/ramips/dts/WT1520.dtsi +++ b/target/linux/ramips/dts/WT1520.dtsi @@ -1,5 +1,8 @@ #include "rt5350.dtsi" +#include +#include + / { compatible = "NEXXWT1520", "ralink,rt5350-soc"; @@ -8,21 +11,24 @@ reg = <0x0 0x2000000>; }; - chosen { - bootargs = "console=ttyS1,57600"; - }; -}; + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; -&uart { - pinctrl-names = "default"; - pinctrl-0 = <&uartf_pins>; - status = "okay"; + reset { + label = "reset"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; }; &pinctrl { state_default: pinctrl0 { gpio { - ralink,group = "jtag"; + ralink,group = "jtag", "uartf"; ralink,function = "gpio"; }; }; -- 2.25.1