From 95b4f112f5197e90906ea701bd8ca5b2cbf46b29 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 23 Mar 2015 23:00:25 -0600 Subject: [PATCH] ARM: rpi: fix RPi1 board rev detection for warranty bit Apparently the firmware's board rev response includes both the board revision and some other data even on the RPi1. In particular, the "warranty bit" is bit 24. We need to mask that out when looking up the board ID. Signed-off-by: Stephen Warren --- board/raspberrypi/rpi/rpi.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 50a699bb9e..a105953541 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -278,10 +278,17 @@ static void get_board_rev(void) * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282 * (a few posts down) + * + * For the RPi 1, bit 24 is the "warranty bit", so we mask off just the + * lower byte to use as the board rev: + * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=98367&start=250 + * http://www.raspberrypi.org/forums/viewtopic.php?f=31&t=20594 */ rpi_board_rev = msg->get_board_rev.body.resp.rev; if (rpi_board_rev & 0x800000) rpi_board_rev = (rpi_board_rev >> 4) & 0xff; + else + rpi_board_rev &= 0xff; if (rpi_board_rev >= ARRAY_SIZE(models)) { printf("RPI: Board rev %u outside known range\n", rpi_board_rev); -- 2.25.1