From 95a2ddaea5575492a780cc7bad4335120542d697 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 24 Mar 2016 22:15:19 -0600 Subject: [PATCH] ARM: bcm2835: expand Kconfig target descriptions This adds an explanation of which Raspberry Pi models each target option supports. Signed-off-by: Stephen Warren Reviewed-by: Tom Rini --- arch/arm/mach-bcm283x/Kconfig | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig index dc6770437e..1f3031d812 100644 --- a/arch/arm/mach-bcm283x/Kconfig +++ b/arch/arm/mach-bcm283x/Kconfig @@ -14,12 +14,38 @@ choice optional config TARGET_RPI - bool "Raspberry Pi" + bool "Raspberry Pi (all BCM2835 variants)" + help + Support for all ARM1176-/BCM2835-based Raspberry Pi variants, such as + the A, A+, B, B+, Compute Module, and Zero. This option cannot + support BCM2836/BCM2837-based Raspberry Pis such as the RPi 2 and + RPi 3 due to different peripheral address maps. + + This option creates a build targetting the ARM1176 ISA. select BCM2835 select CPU_ARM1176 config TARGET_RPI_2 bool "Raspberry Pi 2" + help + Support for all BCM2836-based Raspberry Pi variants, such as + the RPi 2 model B. + + This option also supports BCM2837-based variants such as the RPi 3 + Model B, when run in 32-bit mode, provided you have configured the + VideoCore firmware to select the PL011 UART for the console by: + a) config.txt should contain dtoverlay=pi3-miniuart-bt. + b) You should run the following to tell the VC FW to process DT when + booting, and copy u-boot.bin.img (rather than u-boot.bin) to the SD + card as the kernel image: + + path/to/kernel/scripts/mkknlimg --dtok u-boot.bin u-boot.bin.img + + This works as of firmware.git commit 046effa13ebc "firmware: + arm_loader: emmc clock depends on core clock See: + https://github.com/raspberrypi/firmware/issues/572". + + This option creates a build targetting the ARMv7/AArch32 ISA. select ARMV7_LPAE select BCM2836 select CPU_V7 -- 2.25.1