From 947163b9d28db96923f91301d2289ec195a3f61f Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Wed, 4 Dec 2019 23:11:34 +0100 Subject: [PATCH] kernel: sfp: re-attempt probing for phy Add patches retrying to probe the PHY to restore support for PHYs taking longer to initialize without breaking modules without PHYs. Patches taken from http://git.armlinux.org.uk/cgit/linux-arm.git/log/?h=phy Signed-off-by: Jonas Gorski --- ...finition-for-the-fault-recovery-atte.patch | 55 ++++++++ .../757-net-sfp-rename-sm_retries.patch | 60 ++++++++ ...net-sfp-error-handling-for-phy-probe.patch | 97 +++++++++++++ ...9-net-sfp-re-attempt-probing-for-phy.patch | 132 ++++++++++++++++++ 4 files changed, 344 insertions(+) create mode 100644 target/linux/generic/pending-4.19/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch create mode 100644 target/linux/generic/pending-4.19/757-net-sfp-rename-sm_retries.patch create mode 100644 target/linux/generic/pending-4.19/758-net-sfp-error-handling-for-phy-probe.patch create mode 100644 target/linux/generic/pending-4.19/759-net-sfp-re-attempt-probing-for-phy.patch diff --git a/target/linux/generic/pending-4.19/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch b/target/linux/generic/pending-4.19/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch new file mode 100644 index 0000000000..0e5005ed19 --- /dev/null +++ b/target/linux/generic/pending-4.19/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch @@ -0,0 +1,55 @@ +From 4d6bfb6fbb00af38402db4d1ce464e22def9fd9e Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Thu, 28 Nov 2019 14:24:40 +0000 +Subject: [PATCH 1/4] net: sfp: use a definition for the fault recovery + attempts + +Signed-off-by: Russell King +--- + drivers/net/phy/sfp.c | 14 +++++++++++--- + 1 file changed, 11 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -160,6 +160,14 @@ static const enum gpiod_flags gpio_flags + #define T_RESET_US 10 + #define T_FAULT_RECOVER msecs_to_jiffies(1000) + ++/* N_FAULT_INIT is the number of recovery attempts at module initialisation ++ * time. If the TX_FAULT signal is not deasserted after this number of ++ * attempts at clearing it, we decide that the module is faulty. ++ * N_FAULT is the same but after the module has initialised. ++ */ ++#define N_FAULT_INIT 5 ++#define N_FAULT 5 ++ + /* SFP module presence detection is poor: the three MOD DEF signals are + * the same length on the PCB, which means it's possible for MOD DEF 0 to + * connect before the I2C bus on MOD DEF 1/2. +@@ -1803,7 +1811,7 @@ static void sfp_sm_main(struct sfp *sfp, + sfp_module_tx_enable(sfp); + + /* Initialise the fault clearance retries */ +- sfp->sm_retries = 5; ++ sfp->sm_retries = N_FAULT_INIT; + + /* We need to check the TX_FAULT state, which is not defined + * while TX_DISABLE is asserted. The earliest we want to do +@@ -1842,7 +1850,7 @@ static void sfp_sm_main(struct sfp *sfp, + * there is a fault. + */ + sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT, +- sfp->sm_retries == 5); ++ sfp->sm_retries == N_FAULT_INIT); + } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { + init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT + * clear. Probe for the PHY and check the LOS state. +@@ -1855,7 +1863,7 @@ static void sfp_sm_main(struct sfp *sfp, + sfp_sm_link_check_los(sfp); + + /* Reset the fault retry count */ +- sfp->sm_retries = 5; ++ sfp->sm_retries = N_FAULT; + } + break; + diff --git a/target/linux/generic/pending-4.19/757-net-sfp-rename-sm_retries.patch b/target/linux/generic/pending-4.19/757-net-sfp-rename-sm_retries.patch new file mode 100644 index 0000000000..b347d2c90a --- /dev/null +++ b/target/linux/generic/pending-4.19/757-net-sfp-rename-sm_retries.patch @@ -0,0 +1,60 @@ +From bfa3cbb01c7ea34d7369c9bd2ec1b2dc67082b04 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Mon, 2 Dec 2019 18:06:44 +0000 +Subject: [PATCH 2/4] net: sfp: rename sm_retries + +Rename sm_retries as sm_fault_retries, as this is what this member is +tracking. + +Signed-off-by: Russell King +--- + drivers/net/phy/sfp.c | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -222,7 +222,7 @@ struct sfp { + unsigned char sm_mod_tries; + unsigned char sm_dev_state; + unsigned short sm_state; +- unsigned int sm_retries; ++ unsigned char sm_fault_retries; + + struct sfp_eeprom_id id; + unsigned int module_power_mW; +@@ -1414,7 +1414,7 @@ static bool sfp_los_event_inactive(struc + + static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn) + { +- if (sfp->sm_retries && !--sfp->sm_retries) { ++ if (sfp->sm_fault_retries && !--sfp->sm_fault_retries) { + dev_err(sfp->dev, + "module persistently indicates fault, disabling\n"); + sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0); +@@ -1811,7 +1811,7 @@ static void sfp_sm_main(struct sfp *sfp, + sfp_module_tx_enable(sfp); + + /* Initialise the fault clearance retries */ +- sfp->sm_retries = N_FAULT_INIT; ++ sfp->sm_fault_retries = N_FAULT_INIT; + + /* We need to check the TX_FAULT state, which is not defined + * while TX_DISABLE is asserted. The earliest we want to do +@@ -1850,7 +1850,7 @@ static void sfp_sm_main(struct sfp *sfp, + * there is a fault. + */ + sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT, +- sfp->sm_retries == N_FAULT_INIT); ++ sfp->sm_fault_retries == N_FAULT_INIT); + } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { + init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT + * clear. Probe for the PHY and check the LOS state. +@@ -1863,7 +1863,7 @@ static void sfp_sm_main(struct sfp *sfp, + sfp_sm_link_check_los(sfp); + + /* Reset the fault retry count */ +- sfp->sm_retries = N_FAULT; ++ sfp->sm_fault_retries = N_FAULT; + } + break; + diff --git a/target/linux/generic/pending-4.19/758-net-sfp-error-handling-for-phy-probe.patch b/target/linux/generic/pending-4.19/758-net-sfp-error-handling-for-phy-probe.patch new file mode 100644 index 0000000000..00896dfa26 --- /dev/null +++ b/target/linux/generic/pending-4.19/758-net-sfp-error-handling-for-phy-probe.patch @@ -0,0 +1,97 @@ +From 1fba543dc8edf4a43bff3276306648bb27c1e207 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Fri, 29 Nov 2019 00:30:08 +0000 +Subject: [PATCH 3/4] net: sfp: error handling for phy probe + +Signed-off-by: Russell King +--- + drivers/net/phy/sfp.c | 26 +++++++++++++++++--------- + 1 file changed, 17 insertions(+), 9 deletions(-) + +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -1334,7 +1334,7 @@ static void sfp_sm_phy_detach(struct sfp + sfp->mod_phy = NULL; + } + +-static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45) ++static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45) + { + struct phy_device *phy; + int err; +@@ -1342,18 +1342,18 @@ static void sfp_sm_probe_phy(struct sfp + phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45); + if (phy == ERR_PTR(-ENODEV)) { + dev_info(sfp->dev, "no PHY detected\n"); +- return; ++ return 0; + } + if (IS_ERR(phy)) { + dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy)); +- return; ++ return PTR_ERR(phy); + } + + err = phy_device_register(phy); + if (err) { + phy_device_free(phy); + dev_err(sfp->dev, "phy_device_register failed: %d\n", err); +- return; ++ return err; + } + + err = sfp_add_phy(sfp->sfp_bus, phy); +@@ -1361,10 +1361,12 @@ static void sfp_sm_probe_phy(struct sfp + phy_device_remove(phy); + phy_device_free(phy); + dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err); +- return; ++ return err; + } + + sfp->mod_phy = phy; ++ ++ return 0; + } + + static void sfp_sm_link_up(struct sfp *sfp) +@@ -1437,21 +1439,24 @@ static void sfp_sm_fault(struct sfp *sfp + * Clause 45 copper SFP+ modules (10G) appear to switch their interface + * mode according to the negotiated line speed. + */ +-static void sfp_sm_probe_for_phy(struct sfp *sfp) ++static int sfp_sm_probe_for_phy(struct sfp *sfp) + { ++ int err = 0; ++ + switch (sfp->id.base.extended_cc) { + case SFF8024_ECC_10GBASE_T_SFI: + case SFF8024_ECC_10GBASE_T_SR: + case SFF8024_ECC_5GBASE_T: + case SFF8024_ECC_2_5GBASE_T: +- sfp_sm_probe_phy(sfp, true); ++ err = sfp_sm_probe_phy(sfp, true); + break; + + default: + if (sfp->id.base.e1000_base_t) +- sfp_sm_probe_phy(sfp, false); ++ err = sfp_sm_probe_phy(sfp, false); + break; + } ++ return err; + } + + static int sfp_module_parse_power(struct sfp *sfp) +@@ -1855,7 +1860,10 @@ static void sfp_sm_main(struct sfp *sfp, + init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT + * clear. Probe for the PHY and check the LOS state. + */ +- sfp_sm_probe_for_phy(sfp); ++ if (sfp_sm_probe_for_phy(sfp)) { ++ sfp_sm_next(sfp, SFP_S_FAIL, 0); ++ break; ++ } + if (sfp_module_start(sfp->sfp_bus)) { + sfp_sm_next(sfp, SFP_S_FAIL, 0); + break; diff --git a/target/linux/generic/pending-4.19/759-net-sfp-re-attempt-probing-for-phy.patch b/target/linux/generic/pending-4.19/759-net-sfp-re-attempt-probing-for-phy.patch new file mode 100644 index 0000000000..526c7962cc --- /dev/null +++ b/target/linux/generic/pending-4.19/759-net-sfp-re-attempt-probing-for-phy.patch @@ -0,0 +1,132 @@ +From 6c4efe83a0acf6f06c89ae17b885fa5739eb5be7 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Mon, 2 Dec 2019 18:20:22 +0000 +Subject: [PATCH 4/4] net: sfp: re-attempt probing for phy + +Some 1000BASE-T PHY modules take a while for the PHY to wake up. +Retry the probe a number of times before deciding that the module has +no PHY. + +Tested with: + Sourcephotonics SPGBTXCNFC - PHY takes less than 50ms to respond. + Champion One 1000SFPT - PHY takes about 200ms to respond. + Mikrotik S-RJ01 - no PHY + +Signed-off-by: Russell King +--- + drivers/net/phy/sfp.c | 59 ++++++++++++++++++++++++++++++++++++--------------- + 1 file changed, 42 insertions(+), 17 deletions(-) + +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -60,6 +60,7 @@ enum { + SFP_S_FAIL, + SFP_S_WAIT, + SFP_S_INIT, ++ SFP_S_INIT_PHY, + SFP_S_INIT_TX_FAULT, + SFP_S_WAIT_LOS, + SFP_S_LINK_UP, +@@ -124,6 +125,7 @@ static const char * const sm_state_strin + [SFP_S_FAIL] = "fail", + [SFP_S_WAIT] = "wait", + [SFP_S_INIT] = "init", ++ [SFP_S_INIT_PHY] = "init_phy", + [SFP_S_INIT_TX_FAULT] = "init_tx_fault", + [SFP_S_WAIT_LOS] = "wait_los", + [SFP_S_LINK_UP] = "link_up", +@@ -168,6 +170,12 @@ static const enum gpiod_flags gpio_flags + #define N_FAULT_INIT 5 + #define N_FAULT 5 + ++/* T_PHY_RETRY is the time interval between attempts to probe the PHY. ++ * R_PHY_RETRY is the number of attempts. ++ */ ++#define T_PHY_RETRY msecs_to_jiffies(50) ++#define R_PHY_RETRY 12 ++ + /* SFP module presence detection is poor: the three MOD DEF signals are + * the same length on the PCB, which means it's possible for MOD DEF 0 to + * connect before the I2C bus on MOD DEF 1/2. +@@ -223,6 +231,7 @@ struct sfp { + unsigned char sm_dev_state; + unsigned short sm_state; + unsigned char sm_fault_retries; ++ unsigned char sm_phy_retries; + + struct sfp_eeprom_id id; + unsigned int module_power_mW; +@@ -1340,10 +1349,8 @@ static int sfp_sm_probe_phy(struct sfp * + int err; + + phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45); +- if (phy == ERR_PTR(-ENODEV)) { +- dev_info(sfp->dev, "no PHY detected\n"); +- return 0; +- } ++ if (phy == ERR_PTR(-ENODEV)) ++ return PTR_ERR(phy); + if (IS_ERR(phy)) { + dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy)); + return PTR_ERR(phy); +@@ -1785,6 +1792,7 @@ static void sfp_sm_module(struct sfp *sf + static void sfp_sm_main(struct sfp *sfp, unsigned int event) + { + unsigned long timeout; ++ int ret; + + /* Some events are global */ + if (sfp->sm_state != SFP_S_DOWN && +@@ -1857,22 +1865,39 @@ static void sfp_sm_main(struct sfp *sfp, + sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT, + sfp->sm_fault_retries == N_FAULT_INIT); + } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { +- init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT +- * clear. Probe for the PHY and check the LOS state. +- */ +- if (sfp_sm_probe_for_phy(sfp)) { +- sfp_sm_next(sfp, SFP_S_FAIL, 0); +- break; +- } +- if (sfp_module_start(sfp->sfp_bus)) { +- sfp_sm_next(sfp, SFP_S_FAIL, 0); ++ init_done: ++ sfp->sm_phy_retries = R_PHY_RETRY; ++ goto phy_probe; ++ } ++ break; ++ ++ case SFP_S_INIT_PHY: ++ if (event != SFP_E_TIMEOUT) ++ break; ++ phy_probe: ++ /* TX_FAULT deasserted or we timed out with TX_FAULT ++ * clear. Probe for the PHY and check the LOS state. ++ */ ++ ret = sfp_sm_probe_for_phy(sfp); ++ if (ret == -ENODEV) { ++ if (--sfp->sm_phy_retries) { ++ sfp_sm_next(sfp, SFP_S_INIT_PHY, T_PHY_RETRY); + break; ++ } else { ++ dev_info(sfp->dev, "no PHY detected\n"); + } +- sfp_sm_link_check_los(sfp); +- +- /* Reset the fault retry count */ +- sfp->sm_fault_retries = N_FAULT; ++ } else if (ret) { ++ sfp_sm_next(sfp, SFP_S_FAIL, 0); ++ break; + } ++ if (sfp_module_start(sfp->sfp_bus)) { ++ sfp_sm_next(sfp, SFP_S_FAIL, 0); ++ break; ++ } ++ sfp_sm_link_check_los(sfp); ++ ++ /* Reset the fault retry count */ ++ sfp->sm_fault_retries = N_FAULT; + break; + + case SFP_S_INIT_TX_FAULT: -- 2.25.1