From 93d3f098ebba94dd5b4cc9cd93504012650eba49 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 16 Jul 2009 12:06:48 +0000 Subject: [PATCH] Cleanup glamo platform_data. SVN-Revision: 16863 --- .../files-2.6.30/include/linux/glamofb.h | 23 ++----- .../arch/arm/mach-s3c2442/mach-gta02.c | 60 ++++++++---------- .../drivers/mfd/glamo/glamo-core.c | 61 +++++++----------- .../drivers/mfd/glamo/glamo-core.h | 17 +---- .../files-2.6.30/drivers/mfd/glamo/glamo-fb.c | 62 ++++++++---------- .../drivers/mfd/glamo/glamo-lcm-spi.c | 3 +- .../drivers/mfd/glamo/glamo-mci.c | 63 +++++++++---------- .../drivers/mfd/glamo/glamo-mci.h | 2 +- .../drivers/mfd/glamo/glamo-spi-gpio.c | 45 +++++++------ .../files-2.6.30/include/linux/mfd/glamo.h | 49 +++++++++++++++ .../files-2.6.30/include/linux/spi/glamo.h | 22 +++---- 11 files changed, 193 insertions(+), 214 deletions(-) create mode 100644 target/linux/s3c24xx/files-2.6.30/include/linux/mfd/glamo.h diff --git a/target/linux/generic-2.6/files-2.6.30/include/linux/glamofb.h b/target/linux/generic-2.6/files-2.6.30/include/linux/glamofb.h index 8110fa1462..5f9fab5a48 100644 --- a/target/linux/generic-2.6/files-2.6.30/include/linux/glamofb.h +++ b/target/linux/generic-2.6/files-2.6.30/include/linux/glamofb.h @@ -2,30 +2,19 @@ #define _LINUX_GLAMOFB_H #include -#include #ifdef __KERNEL__ -#include - struct glamo_core; +struct glamofb_handle; -struct glamofb_platform_data { - int width, height; - - int num_modes; - struct fb_videomode *modes; - - struct glamo_spigpio_info *spigpio_info; - struct glamo_core *glamo; +struct glamo_fb_platform_data { + int width, height; - /* glamo mmc platform specific info */ - int (*glamo_can_set_mci_power)(void); + int num_modes; + struct fb_videomode *modes; - /* glamo-mci asking if it should use the slow clock to card */ - int (*glamo_mci_use_slow)(void); - int (*glamo_irq_is_wired)(void); - void (*glamo_external_reset)(int); + struct glamo_core *core; }; int glamofb_cmd_mode(struct glamofb_handle *gfb, int on); diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c index 3bd404b798..b46180212d 100644 --- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c +++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include @@ -97,6 +96,8 @@ #include #include +#include +#include #include #include @@ -1108,14 +1109,6 @@ const struct jbt6k74_platform_data jbt6k74_pdata = { .probe_completed = gta02_jbt6k74_probe_completed, }; -static struct glamo_spigpio_info glamo_spigpio_cfg = { - .pin_clk = GLAMO_GPIO10_OUTPUT, - .pin_mosi = GLAMO_GPIO11_OUTPUT, - .pin_cs = GLAMO_GPIO12_OUTPUT, - .pin_miso = 0, - .bus_num = 2, -}; - /*----------- SPI: Accelerometers attached to SPI of s3c244x ----------------- */ void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume) @@ -1359,19 +1352,6 @@ static int glamo_irq_is_wired(void) return -ENODEV; } -static int gta02_glamo_can_set_mmc_power(void) -{ - switch (S3C_SYSTEM_REV_ATAG) { - case GTA02v3_SYSTEM_REV: - case GTA02v4_SYSTEM_REV: - case GTA02v5_SYSTEM_REV: - case GTA02v6_SYSTEM_REV: - return 1; - } - - return 0; -} - /* Smedia Glamo 3362 */ /* @@ -1417,21 +1397,35 @@ static struct fb_videomode gta02_glamo_modes[] = { } }; - -static struct glamofb_platform_data gta02_glamo_pdata = { - .width = 43, - .height = 58, +static struct glamo_fb_platform_data gta02_glamo_fb_pdata = { + .width = 43, + .height = 58, .num_modes = ARRAY_SIZE(gta02_glamo_modes), .modes = gta02_glamo_modes, +}; + +static struct glamo_spigpio_platform_data gta02_glamo_spigpio_pdata = { + .pin_clk = GLAMO_GPIO10_OUTPUT, + .pin_mosi = GLAMO_GPIO11_OUTPUT, + .pin_cs = GLAMO_GPIO12_OUTPUT, + .pin_miso = 0, + .bus_num = 2, +}; - .spigpio_info = &glamo_spigpio_cfg, +static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = { + .glamo_mmc_use_slow = gta02_glamo_mci_use_slow, +}; + +static struct glamo_platform_data gta02_glamo_pdata = { + .fb_data = >a02_glamo_fb_pdata, + .spigpio_data = >a02_glamo_spigpio_pdata, + .mmc_data = >a02_glamo_mmc_pdata, + + .osci_clock_rate = 32768, - /* glamo MMC function platform data */ - .glamo_can_set_mci_power = gta02_glamo_can_set_mmc_power, - .glamo_mci_use_slow = gta02_glamo_mci_use_slow, .glamo_irq_is_wired = glamo_irq_is_wired, - .glamo_external_reset = gta02_glamo_external_reset + .glamo_external_reset = gta02_glamo_external_reset, }; static struct resource gta02_glamo_resources[] = { @@ -1643,7 +1637,7 @@ static void __init gta02_machine_init(void) s3c24xx_udc_set_platdata(>a02_udc_cfg); s3c_i2c0_set_platdata(NULL); set_s3c2410ts_info(>a02_ts_cfg); - + mangle_glamo_res_by_system_rev(); i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); @@ -1683,7 +1677,7 @@ static void __init gta02_machine_init(void) platform_device_register(>a02_hdq_device); #endif #ifdef CONFIG_LEDS_GTA02_VIBRATOR - gta02_vibrator_dev.dev.parent = &s3c24xx_pwm_device.dev; + gta02_vibrator_dev.dev.parent = &s3c24xx_pwm_device.dev; platform_device_register(>a02_vibrator_dev); #endif } diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c index 45d9b794ed..1a6adcdeae 100644 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c +++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c @@ -25,25 +25,22 @@ #include #include #include -#include -#include #include #include #include #include #include #include -#include #include #include #include -#include -#include -#include #include +#include +#include +#include +#include +#include -#include -#include #include #ifdef CONFIG_PM @@ -81,7 +78,7 @@ struct reg_range { }; struct reg_range reg_range[] = { { 0x0000, 0x76, "General", 1 }, - { 0x0200, 0x16, "Host Bus", 1 }, + { 0x0200, 0x18, "Host Bus", 1 }, { 0x0300, 0x38, "Memory", 1 }, /* { 0x0400, 0x100, "Sensor", 0 }, */ /* { 0x0500, 0x300, "ISP", 0 }, */ @@ -180,14 +177,6 @@ static struct resource glamo_mmc_resources[] = { }, }; -static struct glamo_mci_pdata glamo_mci_def_pdata = { - .gpio_detect = 0, - .glamo_can_set_mci_power = NULL, /* filled in from MFD platform data */ - .glamo_irq_is_wired = NULL, /* filled in from MFD platform data */ - .mci_suspending = NULL, /* filled in from MFD platform data */ - .mci_all_dependencies_resumed = NULL, /* filled in from MFD platform data */ -}; - enum glamo_cells { GLAMO_CELL_FB, GLAMO_CELL_MMC, @@ -620,8 +609,7 @@ static int glamo_pll_rate(struct glamo_core *glamo, { u_int16_t reg; unsigned int div = 512; - /* FIXME: move osci into platform_data */ - unsigned int osci = 32768; + unsigned int osci = glamo->pdata->osci_clock_rate; if (osci == 32768) div = 1; @@ -887,7 +875,7 @@ static void glamo_power(struct glamo_core *glamo, { int n; unsigned long flags; - + spin_lock_irqsave(&glamo->lock, flags); dev_info(&glamo->pdev->dev, "***** glamo_power -> %d\n", new_state); @@ -1188,28 +1176,21 @@ static int __init glamo_probe(struct platform_device *pdev) glamo_pll_rate(glamo, GLAMO_PLL1), glamo_pll_rate(glamo, GLAMO_PLL2)); - glamo->pdata->glamo = glamo; - - /* bring MCI specific stuff over from our MFD platform data */ - glamo_mci_def_pdata.glamo_can_set_mci_power = - glamo->pdata->glamo_can_set_mci_power; - glamo_mci_def_pdata.glamo_mci_use_slow = - glamo->pdata->glamo_mci_use_slow; - glamo_mci_def_pdata.glamo_irq_is_wired = - glamo->pdata->glamo_irq_is_wired; - glamo_mci_def_pdata.pglamo = glamo; - /* register siblings */ - glamo_cells[GLAMO_CELL_MMC].platform_data = &glamo_mci_def_pdata; - glamo_cells[GLAMO_CELL_MMC].data_size = sizeof(glamo_mci_def_pdata); - - glamo_cells[GLAMO_CELL_FB].platform_data = glamo->pdata; - glamo_cells[GLAMO_CELL_FB].data_size = sizeof(struct glamofb_platform_data); - - glamo->pdata->spigpio_info->glamo = glamo; - glamo_cells[GLAMO_CELL_SPI_GPIO].platform_data = glamo->pdata->spigpio_info; + glamo->pdata->mmc_data->core = glamo; + glamo_cells[GLAMO_CELL_MMC].platform_data = glamo->pdata->mmc_data; + glamo_cells[GLAMO_CELL_MMC].data_size = + sizeof(struct glamo_mmc_platform_data); + + glamo->pdata->fb_data->core = glamo; + glamo_cells[GLAMO_CELL_FB].platform_data = glamo->pdata->fb_data; + glamo_cells[GLAMO_CELL_FB].data_size = sizeof(struct glamo_fb_platform_data); + + glamo->pdata->spigpio_data->core = glamo; + glamo_cells[GLAMO_CELL_SPI_GPIO].platform_data = + glamo->pdata->spigpio_data; glamo_cells[GLAMO_CELL_SPI_GPIO].data_size = - sizeof(struct glamo_spigpio_info); + sizeof(struct glamo_spigpio_platform_data); mfd_add_devices(&pdev->dev, pdev->id, glamo_cells, ARRAY_SIZE(glamo_cells), diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.h b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.h index c0340a62ad..4675371025 100644 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.h +++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.h @@ -2,7 +2,7 @@ #define __GLAMO_CORE_H #include -#include +#include /* for the time being, we put the on-screen framebuffer into the lowest * VRAM space. This should make the code easily compatible with the various @@ -24,7 +24,7 @@ struct glamo_core { struct resource *mem_core; void __iomem *base; struct platform_device *pdev; - struct glamofb_platform_data *pdata; + struct glamo_platform_data *pdata; u_int16_t type; u_int16_t revision; spinlock_t lock; @@ -41,19 +41,6 @@ struct glamo_script { int glamo_run_script(struct glamo_core *glamo, struct glamo_script *script, int len, int may_sleep); -struct glamo_mci_pdata { - struct glamo_core * pglamo; - unsigned int gpio_detect; - unsigned int gpio_wprotect; - int (*glamo_can_set_mci_power)(void); - /* glamo-mci asking if it should use the slow clock to card */ - int (*glamo_mci_use_slow)(void); - int (*glamo_irq_is_wired)(void); - void (*mci_suspending)(struct platform_device *dev); - int (*mci_all_dependencies_resumed)(struct platform_device *dev); - -}; - int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine); int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine); void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine); diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-fb.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-fb.c index 90a6541e64..07a5251747 100644 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-fb.c +++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-fb.c @@ -22,23 +22,15 @@ #include #include -#include #include #include -#include #include #include #include -#include -#include -#include -#include -#include #include -#include #include #include -#include +#include #include @@ -69,7 +61,7 @@ struct glamofb_handle { struct resource *reg; struct resource *fb_res; char __iomem *base; - struct glamofb_platform_data *mach_info; + struct glamo_fb_platform_data *mach_info; char __iomem *cursor_addr; int cursor_on; u_int32_t pseudo_pal[16]; @@ -80,7 +72,7 @@ struct glamofb_handle { }; static void glamo_output_enable(struct glamofb_handle *gfb) { - struct glamo_core *gcore = gfb->mach_info->glamo; + struct glamo_core *gcore = gfb->mach_info->core; if (gfb->output_enabled) return; @@ -97,7 +89,7 @@ static void glamo_output_enable(struct glamofb_handle *gfb) { } static void glamo_output_disable(struct glamofb_handle *gfb) { - struct glamo_core *gcore = gfb->mach_info->glamo; + struct glamo_core *gcore = gfb->mach_info->core; if (!gfb->output_enabled) return; @@ -166,8 +158,8 @@ static int glamofb_run_script(struct glamofb_handle *glamo, { int i; - if (glamo->mach_info->glamo->suspending) { - dev_err(&glamo->mach_info->glamo->pdev->dev, + if (glamo->mach_info->core->suspending) { + dev_err(&glamo->mach_info->core->pdev->dev, "IGNORING glamofb_run_script while " "suspended\n"); return -EBUSY; @@ -192,8 +184,8 @@ static int glamofb_check_var(struct fb_var_screeninfo *var, { struct glamofb_handle *glamo = info->par; - if (glamo->mach_info->glamo->suspending) { - dev_err(&glamo->mach_info->glamo->pdev->dev, + if (glamo->mach_info->core->suspending) { + dev_err(&glamo->mach_info->core->pdev->dev, "IGNORING glamofb_check_var while " "suspended\n"); return -EBUSY; @@ -280,8 +272,8 @@ static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation) { int glamo_rot; - if (glamo->mach_info->glamo->suspending) { - dev_err(&glamo->mach_info->glamo->pdev->dev, + if (glamo->mach_info->core->suspending) { + dev_err(&glamo->mach_info->core->pdev->dev, "IGNORING rotate_lcd while " "suspended\n"); return; @@ -316,7 +308,7 @@ static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation) static void glamofb_program_mode(struct glamofb_handle* gfb) { int sync, bp, disp, fp, total; unsigned long flags; - struct glamo_core *gcore = gfb->mach_info->glamo; + struct glamo_core *gcore = gfb->mach_info->core; struct fb_var_screeninfo *var = &gfb->fb->var; dev_dbg(&gcore->pdev->dev, @@ -402,7 +394,7 @@ static int glamofb_pan_display(struct fb_var_screeninfo *var, static struct fb_videomode *glamofb_find_mode(struct fb_info *info, struct fb_var_screeninfo *var) { struct glamofb_handle *glamo = info->par; - struct glamofb_platform_data *mach_info = glamo->mach_info; + struct glamo_fb_platform_data *mach_info = glamo->mach_info; struct fb_videomode *mode; int i; @@ -421,8 +413,8 @@ static int glamofb_set_par(struct fb_info *info) struct fb_var_screeninfo *var = &info->var; struct fb_videomode *mode; - if (glamo->mach_info->glamo->suspending) { - dev_err(&glamo->mach_info->glamo->pdev->dev, + if (glamo->mach_info->core->suspending) { + dev_err(&glamo->mach_info->core->pdev->dev, "IGNORING glamofb_set_par while " "suspended\n"); return -EBUSY; @@ -501,8 +493,8 @@ static int glamofb_setcolreg(unsigned regno, struct glamofb_handle *glamo = info->par; unsigned int val; - if (glamo->mach_info->glamo->suspending) { - dev_err(&glamo->mach_info->glamo->pdev->dev, + if (glamo->mach_info->core->suspending) { + dev_err(&glamo->mach_info->core->pdev->dev, "IGNORING glamofb_set_par while " "suspended\n"); return -EBUSY; @@ -533,7 +525,7 @@ static int glamofb_setcolreg(unsigned regno, static int glamofb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) { struct glamofb_handle *gfb = (struct glamofb_handle*)info->par; - struct glamo_core *gcore = gfb->mach_info->glamo; + struct glamo_core *gcore = gfb->mach_info->core; int retval = -ENOTTY; switch (cmd) { @@ -695,8 +687,8 @@ int glamofb_cmd_mode(struct glamofb_handle *gfb, int on) { int timeout = 2000000; - if (gfb->mach_info->glamo->suspending) { - dev_err(&gfb->mach_info->glamo->pdev->dev, + if (gfb->mach_info->core->suspending) { + dev_err(&gfb->mach_info->core->pdev->dev, "IGNORING glamofb_cmd_mode while " "suspended\n"); return -EBUSY; @@ -759,8 +751,8 @@ int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val) { int timeout = 200000; - if (gfb->mach_info->glamo->suspending) { - dev_err(&gfb->mach_info->glamo->pdev->dev, + if (gfb->mach_info->core->suspending) { + dev_err(&gfb->mach_info->core->pdev->dev, "IGNORING glamofb_cmd_write while " "suspended\n"); return -EBUSY; @@ -815,7 +807,7 @@ static int __init glamofb_probe(struct platform_device *pdev) int rc = -EIO; struct fb_info *fbinfo; struct glamofb_handle *glamofb; - struct glamofb_platform_data *mach_info = pdev->dev.platform_data; + struct glamo_fb_platform_data *mach_info = pdev->dev.platform_data; printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 " "Openmoko, Inc.\n"); @@ -909,8 +901,8 @@ static int __init glamofb_probe(struct platform_device *pdev) fbinfo->var.accel_flags = 0; fbinfo->var.vmode = FB_VMODE_NONINTERLACED; - glamo_engine_enable(mach_info->glamo, GLAMO_ENGINE_LCD); - glamo_engine_reset(mach_info->glamo, GLAMO_ENGINE_LCD); + glamo_engine_enable(mach_info->core, GLAMO_ENGINE_LCD); + glamo_engine_reset(mach_info->core, GLAMO_ENGINE_LCD); glamofb->output_enabled = 1; glamofb->mode_set = 1; @@ -979,13 +971,13 @@ static int glamofb_suspend(struct platform_device *pdev, pm_message_t state) static int glamofb_resume(struct platform_device *pdev) { struct glamofb_handle *gfb = platform_get_drvdata(pdev); - struct glamofb_platform_data *mach_info = pdev->dev.platform_data; + struct glamo_fb_platform_data *mach_info = pdev->dev.platform_data; /* OK let's allow framebuffer ops again */ /* gfb->fb->screen_base = ioremap(gfb->fb_res->start, resource_size(gfb->fb_res)); */ - glamo_engine_enable(mach_info->glamo, GLAMO_ENGINE_LCD); - glamo_engine_reset(mach_info->glamo, GLAMO_ENGINE_LCD); + glamo_engine_enable(mach_info->core, GLAMO_ENGINE_LCD); + glamo_engine_reset(mach_info->core, GLAMO_ENGINE_LCD); printk(KERN_ERR"spin_lock_init\n"); spin_lock_init(&gfb->lock_cmd); diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c index a7129fe798..45d12fce6e 100644 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c +++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c @@ -15,7 +15,7 @@ */ #define DEBUG - +#if 0 #include #include #include @@ -238,3 +238,4 @@ module_exit(glamo_spi_exit); MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver"); MODULE_AUTHOR("Harald Welte ") MODULE_LICENSE("GPL"); +#endif diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c index 0d7a2aa22f..e66a14becb 100644 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c +++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c @@ -11,8 +11,6 @@ */ #include -#include -#include #include #include #include @@ -23,10 +21,9 @@ #include #include #include - -#include -#include -#include +#include +#include +#include #include "glamo-mci.h" #include "glamo-core.h" @@ -189,19 +186,19 @@ static void glamo_mci_fix_card_div(struct glamo_mci_host *host, int div) { unsigned long flags; - spin_lock_irqsave(&host->pdata->pglamo->lock, flags); + spin_lock_irqsave(&host->pdata->core->lock, flags); if (div < 0) { /* stop clock - remove clock from divider input */ - writew(readw(host->pdata->pglamo->base + + writew(readw(host->pdata->core->base + GLAMO_REG_CLOCK_GEN5_1) & (~GLAMO_CLOCK_GEN51_EN_DIV_TCLK), - host->pdata->pglamo->base + GLAMO_REG_CLOCK_GEN5_1); + host->pdata->core->base + GLAMO_REG_CLOCK_GEN5_1); } else { if (host->force_slow_during_powerup) div = host->clk_rate / sd_post_power_clock; - else if (host->pdata->glamo_mci_use_slow && - host->pdata->glamo_mci_use_slow()) + else if (host->pdata->glamo_mmc_use_slow && + host->pdata->glamo_mmc_use_slow()) div = div * sd_slow_ratio; if (div > 255) @@ -212,15 +209,15 @@ static void glamo_mci_fix_card_div(struct glamo_mci_host *host, int div) * register shared with SCLK divisor -- no chance of race because * we don't use sensor interface */ - writew((readw(host->pdata->pglamo->base + + writew((readw(host->pdata->core->base + GLAMO_REG_CLOCK_GEN8) & 0xff00) | div, - host->pdata->pglamo->base + GLAMO_REG_CLOCK_GEN8); + host->pdata->core->base + GLAMO_REG_CLOCK_GEN8); /* enable clock to divider input */ - writew(readw(host->pdata->pglamo->base + + writew(readw(host->pdata->core->base + GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK, - host->pdata->pglamo->base + GLAMO_REG_CLOCK_GEN5_1); + host->pdata->core->base + GLAMO_REG_CLOCK_GEN5_1); } - spin_unlock_irqrestore(&host->pdata->pglamo->lock, flags); + spin_unlock_irqrestore(&host->pdata->core->lock, flags); mdelay(5); } @@ -534,7 +531,7 @@ static void glamo_mci_send_request(struct mmc_host *mmc) struct mmc_command *cmd = mrq->cmd; int timeout = 1000000; - host->request_counter++; + host->request_counter++; /* this guy has data to read/write? */ if (cmd->data) { if(glamo_mci_prepare_pio(host, cmd->data)) { @@ -573,13 +570,13 @@ static void glamo_mci_send_request(struct mmc_host *mmc) * I'm afraid we have to spin on the IRQ status bit and "be * our own INT# line" */ - if (!host->pdata->pglamo->irq_works) { + if (!host->pdata->core->irq_works) { /* * we have faith we will get an "interrupt"... * but something insane like suspend problems can mean * we spin here forever, so we timeout after a LONG time */ - while ((!(readw(host->pdata->pglamo->base + + while ((!(readw(host->pdata->core->base + GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) && (timeout--)); @@ -590,7 +587,7 @@ static void glamo_mci_send_request(struct mmc_host *mmc) goto bail; } /* ack this interrupt source */ - writew(GLAMO_IRQ_MMC, host->pdata->pglamo->base + + writew(GLAMO_IRQ_MMC, host->pdata->core->base + GLAMO_REG_IRQ_CLEAR); /* yay we are an interrupt controller! -- call the ISR @@ -598,7 +595,7 @@ static void glamo_mci_send_request(struct mmc_host *mmc) */ glamo_mci_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host); } - return; + return; done: host->mrq = NULL; mmc_request_done(host->mmc, cmd->mrq); @@ -631,7 +628,7 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* Set power */ switch(ios->power_mode) { case MMC_POWER_UP: - mmc_regulator_set_ocr(host->regulator, ios->vdd); + mmc_regulator_set_ocr(host->regulator, ios->vdd); host->vdd_current = ios->vdd; break; case MMC_POWER_ON: @@ -642,11 +639,11 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->force_slow_during_powerup = 1; if (host->vdd_current != ios->vdd) { - mmc_regulator_set_ocr(host->regulator, ios->vdd); + mmc_regulator_set_ocr(host->regulator, ios->vdd); host->vdd_current = ios->vdd; } if (host->power_mode_current == MMC_POWER_OFF) { - glamo_engine_enable(host->pdata->pglamo, + glamo_engine_enable(host->pdata->core, GLAMO_ENGINE_MMC); powering = 1; } @@ -659,7 +656,7 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* never want clocking with dead card */ glamo_mci_fix_card_div(host, -1); - glamo_engine_disable(host->pdata->pglamo, + glamo_engine_disable(host->pdata->core, GLAMO_ENGINE_MMC); mmc_regulator_set_ocr(host->regulator, 0); @@ -801,7 +798,7 @@ static int glamo_mci_probe(struct platform_device *pdev) ret = request_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), glamo_mci_irq, IRQF_SHARED, pdev->name, host); - if (ret) { + if (ret) { dev_err(&pdev->dev, "failed to register irq.\n"); goto probe_iounmap_data; } @@ -829,8 +826,8 @@ static int glamo_mci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); - glamo_engine_enable(host->pdata->pglamo, GLAMO_ENGINE_MMC); - glamo_engine_reset(host->pdata->pglamo, GLAMO_ENGINE_MMC); + glamo_engine_enable(host->pdata->core, GLAMO_ENGINE_MMC); + glamo_engine_reset(host->pdata->core, GLAMO_ENGINE_MMC); if ((ret = mmc_add_host(mmc))) { dev_err(&pdev->dev, "failed to add mmc host.\n"); @@ -853,7 +850,7 @@ static int glamo_mci_probe(struct platform_device *pdev) probe_freeirq: free_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host); probe_iounmap_data: - iounmap(host->data_base); + iounmap(host->data_base); probe_free_mem_region_data: release_mem_region(host->data_mem->start, resource_size(host->data_mem)); probe_iounmap_mmio: @@ -861,7 +858,7 @@ probe_iounmap_mmio: probe_free_mem_region_mmio: release_mem_region(host->mmio_mem->start, resource_size(host->mmio_mem)); probe_regulator_put: - regulator_put(host->regulator); + regulator_put(host->regulator); probe_free_host: mmc_free_host(mmc); probe_out: @@ -885,7 +882,7 @@ static int glamo_mci_remove(struct platform_device *pdev) mmc_free_host(mmc); - glamo_engine_disable(host->pdata->pglamo, GLAMO_ENGINE_MMC); + glamo_engine_disable(host->pdata->core, GLAMO_ENGINE_MMC); return 0; } @@ -929,8 +926,8 @@ int glamo_mci_resume(struct platform_device *dev) sd_idleclk = 1; - glamo_engine_enable(host->pdata->pglamo, GLAMO_ENGINE_MMC); - glamo_engine_reset(host->pdata->pglamo, GLAMO_ENGINE_MMC); + glamo_engine_enable(host->pdata->core, GLAMO_ENGINE_MMC); + glamo_engine_reset(host->pdata->core, GLAMO_ENGINE_MMC); host->suspending--; diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h index ae29dd8820..52c3fe3342 100644 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h +++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h @@ -14,7 +14,7 @@ struct glamo_mci_host { struct platform_device *pdev; - struct glamo_mci_pdata *pdata; + struct glamo_mmc_platform_data *pdata; struct mmc_host *mmc; struct resource *mmio_mem; struct resource *data_mem; diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c index b92e48a17b..de632c5a55 100644 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c +++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include @@ -38,8 +37,7 @@ struct glamo_spigpio { struct spi_bitbang bitbang; struct spi_master *master; - struct glamo_spigpio_info *info; - struct glamo_core *glamo; + struct glamo_spigpio_platform_data *info; }; static inline struct glamo_spigpio *to_sg(struct spi_device *spi) @@ -50,20 +48,20 @@ static inline struct glamo_spigpio *to_sg(struct spi_device *spi) static inline void setsck(struct spi_device *dev, int on) { struct glamo_spigpio *sg = to_sg(dev); - glamo_gpio_setpin(sg->glamo, sg->info->pin_clk, on ? 1 : 0); + glamo_gpio_setpin(sg->info->core, sg->info->pin_clk, on ? 1 : 0); } static inline void setmosi(struct spi_device *dev, int on) { struct glamo_spigpio *sg = to_sg(dev); - glamo_gpio_setpin(sg->glamo, sg->info->pin_mosi, on ? 1 : 0); + glamo_gpio_setpin(sg->info->core, sg->info->pin_mosi, on ? 1 : 0); } static inline u32 getmiso(struct spi_device *dev) { struct glamo_spigpio *sg = to_sg(dev); if (sg->info->pin_miso) - return glamo_gpio_getpin(sg->glamo, sg->info->pin_miso) ? 1 : 0; + return glamo_gpio_getpin(sg->info->core, sg->info->pin_miso) ? 1 : 0; else return 0; } @@ -123,7 +121,7 @@ static void glamo_spigpio_chipsel(struct spi_device *spi, int value) dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n", value, spi, gs, gs->info, gs->info->glamo); #endif - glamo_gpio_setpin(gs->glamo, gs->info->pin_cs, value ? 0 : 1); + glamo_gpio_setpin(gs->info->core, gs->info->pin_cs, value ? 0 : 1); } @@ -153,7 +151,6 @@ static int glamo_spigpio_probe(struct platform_device *pdev) master->bus_num = 2; /* FIXME: use dynamic number */ sp->master = spi_master_get(master); - sp->glamo = sp->info->glamo; sp->bitbang.master = sp->master; sp->bitbang.chipselect = glamo_spigpio_chipsel; @@ -163,20 +160,20 @@ static int glamo_spigpio_probe(struct platform_device *pdev) sp->bitbang.txrx_word[SPI_MODE_3] = glamo_spigpio_txrx_mode3; /* set state of spi pins */ - glamo_gpio_setpin(sp->glamo, sp->info->pin_clk, 0); - glamo_gpio_setpin(sp->glamo, sp->info->pin_mosi, 0); - glamo_gpio_setpin(sp->glamo, sp->info->pin_cs, 1); + glamo_gpio_setpin(sp->info->core, sp->info->pin_clk, 0); + glamo_gpio_setpin(sp->info->core, sp->info->pin_mosi, 0); + glamo_gpio_setpin(sp->info->core, sp->info->pin_cs, 1); - glamo_gpio_cfgpin(sp->glamo, sp->info->pin_clk); - glamo_gpio_cfgpin(sp->glamo, sp->info->pin_mosi); - glamo_gpio_cfgpin(sp->glamo, sp->info->pin_cs); + glamo_gpio_cfgpin(sp->info->core, sp->info->pin_clk); + glamo_gpio_cfgpin(sp->info->core, sp->info->pin_mosi); + glamo_gpio_cfgpin(sp->info->core, sp->info->pin_cs); if (sp->info->pin_miso) - glamo_gpio_cfgpin(sp->glamo, sp->info->pin_miso); + glamo_gpio_cfgpin(sp->info->core, sp->info->pin_miso); /* bring the LCM panel out of reset if it isn't already */ - glamo_gpio_setpin(sp->glamo, GLAMO_GPIO4, 1); - glamo_gpio_cfgpin(sp->glamo, GLAMO_GPIO4_OUTPUT); + glamo_gpio_setpin(sp->info->core, GLAMO_GPIO4, 1); + glamo_gpio_cfgpin(sp->info->core, GLAMO_GPIO4_OUTPUT); msleep(90); #if 0 @@ -233,15 +230,15 @@ static int glamo_spigpio_resume(struct platform_device *pdev) return 0; /* set state of spi pins */ - glamo_gpio_setpin(sp->glamo, sp->info->pin_clk, 0); - glamo_gpio_setpin(sp->glamo, sp->info->pin_mosi, 0); - glamo_gpio_setpin(sp->glamo, sp->info->pin_cs, 1); + glamo_gpio_setpin(sp->info->core, sp->info->pin_clk, 0); + glamo_gpio_setpin(sp->info->core, sp->info->pin_mosi, 0); + glamo_gpio_setpin(sp->info->core, sp->info->pin_cs, 1); - glamo_gpio_cfgpin(sp->glamo, sp->info->pin_clk); - glamo_gpio_cfgpin(sp->glamo, sp->info->pin_mosi); - glamo_gpio_cfgpin(sp->glamo, sp->info->pin_cs); + glamo_gpio_cfgpin(sp->info->core, sp->info->pin_clk); + glamo_gpio_cfgpin(sp->info->core, sp->info->pin_mosi); + glamo_gpio_cfgpin(sp->info->core, sp->info->pin_cs); if (sp->info->pin_miso) - glamo_gpio_cfgpin(sp->glamo, sp->info->pin_miso); + glamo_gpio_cfgpin(sp->info->core, sp->info->pin_miso); return 0; } diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/mfd/glamo.h b/target/linux/s3c24xx/files-2.6.30/include/linux/mfd/glamo.h new file mode 100644 index 0000000000..47d9fd257e --- /dev/null +++ b/target/linux/s3c24xx/files-2.6.30/include/linux/mfd/glamo.h @@ -0,0 +1,49 @@ +#ifndef __GLAMO_MFD_H +#define __GLAMO_MFD_H + +struct glamo_core; +struct glamo_spigpio_platform_data; +struct glamo_fb_platform_data; + +struct glamo_mmc_platform_data { + int (*glamo_mmc_use_slow)(void); + + struct glamo_core *core; +}; + +struct glamo_platform_data { + struct glamo_fb_platform_data *fb_data; + struct glamo_spigpio_platform_data *spigpio_data; + struct glamo_mmc_platform_data *mmc_data; + + unsigned int osci_clock_rate; + + int (*glamo_irq_is_wired)(void); + void (*glamo_external_reset)(int); +}; + +enum glamo_engine { + GLAMO_ENGINE_CAPTURE = 0, + GLAMO_ENGINE_ISP = 1, + GLAMO_ENGINE_JPEG = 2, + GLAMO_ENGINE_MPEG_ENC = 3, + GLAMO_ENGINE_MPEG_DEC = 4, + GLAMO_ENGINE_LCD = 5, + GLAMO_ENGINE_CMDQ = 6, + GLAMO_ENGINE_2D = 7, + GLAMO_ENGINE_3D = 8, + GLAMO_ENGINE_MMC = 9, + GLAMO_ENGINE_MICROP0 = 10, + GLAMO_ENGINE_RISC = 11, + GLAMO_ENGINE_MICROP1_MPEG_ENC = 12, + GLAMO_ENGINE_MICROP1_MPEG_DEC = 13, +#if 0 + GLAMO_ENGINE_H264_DEC = 14, + GLAMO_ENGINE_RISC1 = 15, + GLAMO_ENGINE_SPI = 16, +#endif + __NUM_GLAMO_ENGINES +}; + + +#endif diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h b/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h index 05b8cd7573..cef9bcb67c 100644 --- a/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h +++ b/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h @@ -3,24 +3,16 @@ #include -struct spi_board_info; -struct glamofb_handle; struct glamo_core; -struct glamo_spi_info { - unsigned long board_size; - struct spi_board_info *board_info; - struct glamofb_handle *glamofb_handle; -}; - -struct glamo_spigpio_info { - unsigned int pin_clk; - unsigned int pin_mosi; - unsigned int pin_miso; - unsigned int pin_cs; - int bus_num; +struct glamo_spigpio_platform_data { + unsigned int pin_clk; + unsigned int pin_mosi; + unsigned int pin_miso; + unsigned int pin_cs; + int bus_num; - struct glamo_core *glamo; + struct glamo_core *core; }; -- 2.25.1