From 93a83872c707891bad22f7776d79a650c870601f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 3 Sep 2009 10:09:04 -0500 Subject: [PATCH] ppc/85xx: Clean up p1_p2_rdb PCI setup General code cleanup to use in/out IO accessors as well as making the code that prints out info sane between board and generic fsl pci code. Signed-off-by: Kumar Gala --- board/freescale/p1_p2_rdb/pci.c | 42 +++++++++++++++++---------------- drivers/pci/fsl_pci_init.c | 2 +- 2 files changed, 23 insertions(+), 21 deletions(-) diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c index a3617d5703..4c08f9efa0 100644 --- a/board/freescale/p1_p2_rdb/pci.c +++ b/board/freescale/p1_p2_rdb/pci.c @@ -41,60 +41,62 @@ static struct pci_controller pcie2_hose; void pci_init_board(void) { - struct fsl_pci_info pci_info[2]; volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint devdisr = in_be32(&gur->devdisr); - uint io_sel = (in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16; - int num = 0; + struct fsl_pci_info pci_info[2]; + u32 devdisr, pordevsr, io_sel, host_agent; int first_free_busno = 0; + int num = 0; int pcie_ep, pcie_configured; + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16; + debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", devdisr, io_sel, host_agent); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) printf (" eTSEC2 is in sgmii mode.\n"); + puts("\n"); #ifdef CONFIG_PCIE2 - SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent); pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - puts ("\n PCIE2 connected to Slot 1 as "); - printf ("%s (base address %lx)", - pcie_ep ? "End Point": "Root Complex", pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num], + SET_STD_PCIE_INFO(pci_info[num], 2); + printf(" PCIE2 connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); - num++; } else { printf (" PCIE2: disabled\n"); } + puts("\n"); #else - set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ #endif #ifdef CONFIG_PCIE1 - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - puts ("\n PCIE1 connected to Slot 2 as "); - printf ("%s (base address %lx)", + SET_STD_PCIE_INFO(pci_info[num], 1); + printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num], + first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); - num++; } else { printf (" PCIE1: disabled\n"); } + puts("\n"); #else - set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ #endif } diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 885542c1e9..87944bfad5 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -450,7 +450,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - printf("\n PCIE%x on bus %02x - %02x\n", pci_info->pci_num, + printf(" PCIE%x on bus %02x - %02x\n", pci_info->pci_num, hose->first_busno, hose->last_busno); return(hose->last_busno + 1); -- 2.25.1