From 93899a1329f66ffa7550a75b8af3bb40e6a3c67a Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 3 Apr 2013 10:00:21 +0000 Subject: [PATCH] add profile for tenda w150m board http://patchwork.openwrt.org/patch/3371/ Signed-off-by: Chi Zhang SVN-Revision: 36176 --- target/linux/ramips/base-files/etc/diag.sh | 2 +- .../etc/hotplug.d/firmware/10-rt2x00-eeprom | 1 + .../base-files/etc/uci-defaults/02_network | 2 + .../base-files/lib/preinit/06_set_iface_mac | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/W150M.dts | 98 +++++++++++++++++++ target/linux/ramips/image/Makefile | 3 + 8 files changed, 110 insertions(+), 1 deletion(-) create mode 100644 target/linux/ramips/dts/W150M.dts diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index dbde1f7775..866003c28c 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -9,7 +9,7 @@ get_status_led() { 3g-6200n) status_led="edimax:green:power" ;; - 3g300m) + 3g300m | w150m) status_led="tenda:blue:ap" ;; argus-atp52b) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 6dd36d7403..b6490b5b58 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -85,6 +85,7 @@ case "$FIRMWARE" in v11st-fe | \ v22rw-2x2 | \ w306r-v20 | \ + w150m | \ w502u | \ wcr-150gn | \ whr-g300n | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index d2400870c6..98aefbdf32 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -38,6 +38,7 @@ ramips_setup_interfaces() case $board in 3g300m | \ + w150m | \ all0256n | \ all5002 | \ broadway) @@ -156,6 +157,7 @@ ramips_setup_macs() ;; 3g-6200n | \ 3g300m | \ + w150m | \ air3gii | \ argus-atp52b | \ bc2 | \ diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 985d1bc8f7..7824e2b252 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -12,6 +12,7 @@ preinit_set_mac_address() { 3g-6200n |\ 3g-6200nl |\ 3g300m | \ + w150m | \ mzk-w300nh2 |\ wl-330n |\ wl-330n3g) diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 4948e5b5cc..c89dd469a7 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -180,6 +180,9 @@ ramips_board_detect() { *"Tenda W306R V2.0") name="w306r-v20" ;; + *"Tenda W150M") + name="w150m" + ;; *"TEW-691GR") name="tew-691gr" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index e2a55feabb..34d2c54c84 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -17,6 +17,7 @@ platform_check_image() { 3g-6200n | \ 3g-6200nl | \ 3g300m | \ + w150m | \ air3gii | \ all0239-3g | \ all0256n | \ diff --git a/target/linux/ramips/dts/W150M.dts b/target/linux/ramips/dts/W150M.dts new file mode 100644 index 0000000000..1652fcd6da --- /dev/null +++ b/target/linux/ramips/dts/W150M.dts @@ -0,0 +1,98 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "3G300M", "ralink,rt3050-soc"; + model = "Tenda 3G300M"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3grouter { + label = "tenda:blue:3grouter"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "tenda:blue:ap"; + gpios = <&gpio0 12 1>; + }; + wisprouter { + label = "tenda:blue:wisprouter"; + gpios = <&gpio0 9 1>; + }; + wirelessrouter { + label = "tenda:blue:wirelessrouter"; + gpios = <&gpio0 13 1>; + }; + 3g { + label = "tenda:blue:3g"; + gpios = <&gpio0 7 1>; + }; + wpsreset { + label = "tenda:blue:wpsreset"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 10 1>; + linux,code = <0x100>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 9909d50d33..0002eb4974 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -340,6 +340,8 @@ Image/Build/Profile/SL-R7205=$(call BuildFirmware/Default4M/$(1),$(1),sl-r7205,S Image/Build/Profile/V22RW-2X2=$(call BuildFirmware/Default4M/$(1),$(1),v22rw-2x2,V22RW-2X2) +Image/Build/Profile/W150M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w150m,W150M,$(ralink_default_fw_size_4M),W150M Kernel Image,factory) + Image/Build/Profile/W306R_V20=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w306r-v20,W306R_V20,$(ralink_default_fw_size_4M),linkn Kernel Image,factory) Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U) @@ -440,6 +442,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/SL-R7205,$(1)) $(call Image/Build/Profile/UR-326N4G,$(1)) $(call Image/Build/Profile/V22RW-2X2,$(1)) + $(call Image/Build/Profile/W150M,$(1)) $(call Image/Build/Profile/W306R_V20,$(1)) $(call Image/Build/Profile/W502U,$(1)) $(call Image/Build/Profile/WCR150GN,$(1)) -- 2.25.1