From 8e1665102f699ec5605cc2bc8a0ff2aba2defb39 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Fri, 27 Jul 2018 16:37:05 +0200 Subject: [PATCH] stm32mp1: add gpio led support This patch add the 4 LED available on the ED1 board and activated gpio led driver. Reviewed-by: Simon Glass Signed-off-by: Patrick Delaunay --- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 24 ++++++++++++++++++++++++ configs/stm32mp15_basic_defconfig | 2 ++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 39a0ebce90..4898483e1d 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -13,6 +13,30 @@ mmc1 = &sdmmc2; i2c3 = &i2c4; }; + + led { + compatible = "gpio-leds"; + + red { + label = "stm32mp:red:status"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + green { + label = "stm32mp:green:user"; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + orange { + label = "stm32mp:orange:status"; + gpios = <&gpioh 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + blue { + label = "stm32mp:blue:user"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + }; + }; }; &uart4_pins_a { diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index ad21bdbab4..5b7fa5b3a2 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -31,6 +31,8 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_STM32_ADC=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y +CONFIG_LED=y +CONFIG_LED_GPIO=y CONFIG_DM_MMC=y CONFIG_STM32_SDMMC2=y # CONFIG_PINCTRL_FULL is not set -- 2.25.1