From 8db9eff6c51ad874d6dadfee70c23302c08bd9c4 Mon Sep 17 00:00:00 2001 From: Zach Sadecki Date: Mon, 9 Jan 2012 10:22:54 +0000 Subject: [PATCH] mx28: fix clearing of IRQs in power init There are 2 locations in the power init code for the mx28 where IRQs are not being cleared because incorrect methods to clear those bits were being used. This was causing my board to get stuck waiting for POWER_CTRL_VDD5V_DROOP_IRQ to clear. Using the correct method to clear the IRQs fixes it. Signed-off-by: Zach Sadecki Cc: Wolfgang Denk Cc: Stefano Babic Acked-by: Marek Vasut --- arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c index a4dc2a31b7..380b120dc9 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c @@ -240,8 +240,8 @@ void mx28_enable_4p2_dcdc_input(int xfer) clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO); while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) - clrbits_le32(&power_regs->hw_power_ctrl, - POWER_CTRL_VBUS_VALID_IRQ); + writel(POWER_CTRL_VBUS_VALID_IRQ, + &power_regs->hw_power_ctrl_clr); if (prev_5v_brnout) { writel(POWER_5VCTRL_PWDN_5VBRNOUT, @@ -256,8 +256,8 @@ void mx28_enable_4p2_dcdc_input(int xfer) } while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ) - clrbits_le32(&power_regs->hw_power_ctrl, - POWER_CTRL_VDD5V_DROOP_IRQ); + writel(POWER_CTRL_VDD5V_DROOP_IRQ, + &power_regs->hw_power_ctrl_clr); if (prev_5v_droop) clrbits_le32(&power_regs->hw_power_ctrl, -- 2.25.1