From 89e69fd4a96bcab2469d3d084ba335c6b925771a Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 19 Aug 2014 17:54:28 +0200 Subject: [PATCH] arm: vf610: lpuart: disable FIFO on initializaton UART does not use the UART FIFO, but we should also not rely that the UART FIFO is diabled by default. For instance, when loading U-Boot using the boot ROMs serial downloader protocol over UART, FIFO is enabled at U-Boot start time. This patch disables the RX and TX FIFO, sets back their thresholds and flushes them. Signed-off-by: Stefan Agner --- drivers/serial/serial_lpuart.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c index 96173ca440..0a5e15919f 100644 --- a/drivers/serial/serial_lpuart.c +++ b/drivers/serial/serial_lpuart.c @@ -17,6 +17,10 @@ #define US1_OR (1 << 3) #define UC2_TE (1 << 3) #define UC2_RE (1 << 2) +#define CFIFO_TXFLUSH (1 << 7) +#define CFIFO_RXFLUSH (1 << 6) +#define SFIFO_RXOF (1 << 2) +#define SFIFO_RXUF (1 << 0) DECLARE_GLOBAL_DATA_PTR; @@ -85,6 +89,12 @@ static int lpuart_serial_init(void) __raw_writeb(0, &base->umodem); __raw_writeb(0, &base->uc1); + /* Disable FIFO and flush buffer */ + __raw_writeb(0x0, &base->upfifo); + __raw_writeb(0x0, &base->utwfifo); + __raw_writeb(0x1, &base->urwfifo); + __raw_writeb(CFIFO_TXFLUSH | CFIFO_RXFLUSH, &base->ucfifo); + /* provide data bits, parity, stop bit, etc */ serial_setbrg(); -- 2.25.1