From 8973d816588a8479eeb0e3a9f1e730922d3efc07 Mon Sep 17 00:00:00 2001 From: Loic Devulder Date: Tue, 27 Nov 2018 17:41:18 +0100 Subject: [PATCH] ARM: meson: Add regmap support for clock driver This patch modifies the meson clock driver to use syscon/regmap like the Linux kernel does, as it is needed if we want to share the same DTS files. DTS files are synchronized from Linux 4.19. Signed-off-by: Loic Devulder Acked-by: Neil Armstrong --- arch/arm/dts/meson-gx.dtsi | 31 ++++++++-- arch/arm/dts/meson-gxbb-nanopi-k2.dts | 48 +++++++++++++++ arch/arm/dts/meson-gxbb.dtsi | 14 +++-- arch/arm/dts/meson-gxl-mali.dtsi | 2 +- arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 5 +- arch/arm/dts/meson-gxl-s905x-p212.dtsi | 8 +-- arch/arm/dts/meson-gxl.dtsi | 26 ++++---- arch/arm/dts/meson-gxm-khadas-vim2.dts | 24 ++++++++ drivers/clk/clk_meson.c | 59 ++++++++++--------- 9 files changed, 151 insertions(+), 66 deletions(-) diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi index 3c31e21cbe..f1e5cdbade 100644 --- a/arch/arm/dts/meson-gx.dtsi +++ b/arch/arm/dts/meson-gx.dtsi @@ -35,10 +35,16 @@ no-map; }; + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved_alt: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable; - size = <0x0 0xbc00000>; + size = <0x0 0x10000000>; alignment = <0x0 0x400000>; linux,cma-default; }; @@ -338,7 +344,7 @@ ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; pwrc_vpu: power-controller-vpu { @@ -417,6 +423,19 @@ }; }; + dmcbus: bus@c8838000 { + compatible = "simple-bus"; + reg = <0x0 0xc8838000 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x0 0x48 0x0 0x14>; + }; + }; + hiubus: bus@c883c000 { compatible = "simple-bus"; reg = <0x0 0xc883c000 0x0 0x2000>; @@ -425,7 +444,7 @@ ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; sysctrl: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; reg = <0 0 0 0x400>; }; @@ -457,21 +476,21 @@ sd_emmc_a: mmc@70000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x70000 0x0 0x2000>; + reg = <0x0 0x70000 0x0 0x800>; interrupts = ; status = "disabled"; }; sd_emmc_b: mmc@72000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x72000 0x0 0x2000>; + reg = <0x0 0x72000 0x0 0x800>; interrupts = ; status = "disabled"; }; sd_emmc_c: mmc@74000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x74000 0x0 0x2000>; + reg = <0x0 0x74000 0x0 0x800>; interrupts = ; status = "disabled"; }; diff --git a/arch/arm/dts/meson-gxbb-nanopi-k2.dts b/arch/arm/dts/meson-gxbb-nanopi-k2.dts index 7d5709c37e..cbe99bd4e0 100644 --- a/arch/arm/dts/meson-gxbb-nanopi-k2.dts +++ b/arch/arm/dts/meson-gxbb-nanopi-k2.dts @@ -106,6 +106,42 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + /* CVBS is available on CON1 pin 36, disabled by default */ + cvbs-connector { + compatible = "composite-video-connector"; + status = "disabled"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; ðmac { @@ -137,6 +173,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi index 562c26a0ba..1ade7e4868 100644 --- a/arch/arm/dts/meson-gxbb.dtsi +++ b/arch/arm/dts/meson-gxbb.dtsi @@ -307,11 +307,10 @@ clock-names = "isfr", "iahb", "venci"; }; -&hiubus { - clkc: clock-controller@0 { +&sysctrl { + clkc: clock-controller { compatible = "amlogic,gxbb-clkc"; #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; }; }; @@ -391,7 +390,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", @@ -716,6 +715,7 @@ <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; }; &sd_emmc_b { @@ -723,6 +723,7 @@ <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; }; &sd_emmc_c { @@ -730,6 +731,7 @@ <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; }; &spicc { @@ -749,12 +751,12 @@ }; &uart_AO { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; &uart_AO_B { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; diff --git a/arch/arm/dts/meson-gxl-mali.dtsi b/arch/arm/dts/meson-gxl-mali.dtsi index eb327664a4..6aaafff674 100644 --- a/arch/arm/dts/meson-gxl-mali.dtsi +++ b/arch/arm/dts/meson-gxl-mali.dtsi @@ -6,7 +6,7 @@ &apb { mali: gpu@c0000 { - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; reg = <0x0 0xc0000 0x0 0x40000>; interrupts = , , diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts index 3e3eb31748..90a56af967 100644 --- a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts @@ -13,7 +13,7 @@ / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Libre Technology CC"; + model = "Libre Computer Board AML-S905X-CC"; aliases { serial0 = &uart_AO; @@ -234,9 +234,6 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi index 3bd405079b..a1b31013ab 100644 --- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi +++ b/arch/arm/dts/meson-gxl-s905x-p212.dtsi @@ -191,8 +191,8 @@ }; &usb2_phy0 { - /* - * HDMI_5V is also used as supply for the USB VBUS. - */ - phy-supply = <&hdmi_5v>; + /* + * HDMI_5V is also used as supply for the USB VBUS. + */ + phy-supply = <&hdmi_5v>; }; diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi index dba365ed4b..8f0bb3c44b 100644 --- a/arch/arm/dts/meson-gxl.dtsi +++ b/arch/arm/dts/meson-gxl.dtsi @@ -13,14 +13,6 @@ / { compatible = "amlogic,meson-gxl"; - reserved-memory { - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved_alt: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - }; - soc { usb0: usb@c9000000 { status = "disabled"; @@ -267,11 +259,10 @@ clock-names = "isfr", "iahb", "venci"; }; -&hiubus { - clkc: clock-controller@0 { - compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc"; +&sysctrl { + clkc: clock-controller { + compatible = "amlogic,gxl-clkc"; #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; }; }; @@ -346,7 +337,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", @@ -725,13 +716,15 @@ <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; }; &sd_emmc_c { @@ -739,6 +732,7 @@ <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; }; &spicc { @@ -758,12 +752,12 @@ }; &uart_AO { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; &uart_AO_B { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; diff --git a/arch/arm/dts/meson-gxm-khadas-vim2.dts b/arch/arm/dts/meson-gxm-khadas-vim2.dts index 0868da476e..313f88f875 100644 --- a/arch/arm/dts/meson-gxm-khadas-vim2.dts +++ b/arch/arm/dts/meson-gxm-khadas-vim2.dts @@ -209,10 +209,34 @@ #cooling-cells = <2>; }; +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; + &cpu4 { #cooling-cells = <2>; }; +&cpu5 { + #cooling-cells = <2>; +}; + +&cpu6 { + #cooling-cells = <2>; +}; + +&cpu7 { + #cooling-cells = <2>; +}; + ðmac { pinctrl-0 = <ð_pins>; pinctrl-names = "default"; diff --git a/drivers/clk/clk_meson.c b/drivers/clk/clk_meson.c index 0df8b91d42..2cb53fb92d 100644 --- a/drivers/clk/clk_meson.c +++ b/drivers/clk/clk_meson.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include #include #include "clk_meson.h" @@ -65,7 +67,7 @@ #define XTAL_RATE 24000000 struct meson_clk { - void __iomem *addr; + struct regmap *map; }; static ulong meson_div_get_rate(struct clk *clk, unsigned long id); @@ -217,8 +219,8 @@ static int meson_set_gate_by_id(struct clk *clk, unsigned long id, bool on) debug("%s: really %sabling %ld\n", __func__, on ? "en" : "dis", id); - clrsetbits_le32(priv->addr + gate->reg, - BIT(gate->bit), on ? BIT(gate->bit) : 0); + regmap_update_bits(priv->map, gate->reg, + BIT(gate->bit), on ? BIT(gate->bit) : 0); /* Propagate to next gate(s) */ switch (id) { @@ -269,7 +271,7 @@ static ulong meson_div_get_rate(struct clk *clk, unsigned long id) unsigned int rate, parent_rate; struct parm *parm; int parent; - u32 reg; + uint reg; switch (id) { case CLKID_VPU_0_DIV: @@ -292,7 +294,7 @@ static ulong meson_div_get_rate(struct clk *clk, unsigned long id) return -ENOENT; } - reg = readl(priv->addr + parm->reg_off); + regmap_read(priv->map, parm->reg_off, ®); reg = PARM_GET(parm->width, parm->shift, reg); debug("%s: div of %ld is %d\n", __func__, id, reg + 1); @@ -318,7 +320,6 @@ static ulong meson_div_set_rate(struct clk *clk, unsigned long id, ulong rate, unsigned long parent_rate; struct parm *parm; int parent; - u32 reg; int ret; if (current_rate == rate) @@ -383,9 +384,8 @@ static ulong meson_div_set_rate(struct clk *clk, unsigned long id, ulong rate, debug("%s: setting div of %ld to %d\n", __func__, id, new_div); - reg = readl(priv->addr + parm->reg_off); - writel(PARM_SET(parm->width, parm->shift, reg, new_div - 1), - priv->addr + parm->reg_off); + regmap_update_bits(priv->map, parm->reg_off, SETPMASK(parm->width, parm->shift), + (new_div - 1) << parm->shift); debug("%s: new rate of %ld is %ld\n", __func__, id, meson_div_get_rate(clk, id)); @@ -446,7 +446,7 @@ static ulong meson_mux_get_parent(struct clk *clk, unsigned long id) struct meson_clk *priv = dev_get_priv(clk->dev); struct parm *parm; int *parents; - u32 reg; + uint reg; switch (id) { case CLKID_VPU: @@ -477,7 +477,7 @@ static ulong meson_mux_get_parent(struct clk *clk, unsigned long id) return -ENOENT; } - reg = readl(priv->addr + parm->reg_off); + regmap_read(priv->map, parm->reg_off, ®); reg = PARM_GET(parm->width, parm->shift, reg); debug("%s: parent of %ld is %d (%d)\n", @@ -494,7 +494,6 @@ static ulong meson_mux_set_parent(struct clk *clk, unsigned long id, unsigned int new_index = -EINVAL; struct parm *parm; int *parents; - u32 reg; int i; if (IS_ERR_VALUE(cur_parent)) @@ -546,9 +545,8 @@ static ulong meson_mux_set_parent(struct clk *clk, unsigned long id, debug("%s: new index of %ld is %d\n", __func__, id, new_index); - reg = readl(priv->addr + parm->reg_off); - writel(PARM_SET(parm->width, parm->shift, reg, new_index), - priv->addr + parm->reg_off); + regmap_update_bits(priv->map, parm->reg_off, SETPMASK(parm->width, parm->shift), + new_index << parm->shift); debug("%s: new parent of %ld is %ld\n", __func__, id, meson_mux_get_parent(clk, id)); @@ -570,7 +568,7 @@ static unsigned long meson_clk81_get_rate(struct clk *clk) { struct meson_clk *priv = dev_get_priv(clk->dev); unsigned long parent_rate; - u32 reg; + uint reg; int parents[] = { -1, -1, @@ -583,7 +581,7 @@ static unsigned long meson_clk81_get_rate(struct clk *clk) }; /* mux */ - reg = readl(priv->addr + HHI_MPEG_CLK_CNTL); + regmap_read(priv->map, HHI_MPEG_CLK_CNTL, ®); reg = (reg >> 12) & 7; switch (reg) { @@ -597,7 +595,7 @@ static unsigned long meson_clk81_get_rate(struct clk *clk) } /* divider */ - reg = readl(priv->addr + HHI_MPEG_CLK_CNTL); + regmap_read(priv->map, HHI_MPEG_CLK_CNTL, ®); reg = reg & ((1 << 7) - 1); /* clk81 divider is zero based */ @@ -641,8 +639,9 @@ static ulong meson_mpll_get_rate(struct clk *clk, unsigned long id) { struct meson_clk *priv = dev_get_priv(clk->dev); struct parm *psdm, *pn2; - unsigned long reg, sdm, n2; + unsigned long sdm, n2; unsigned long parent_rate; + uint reg; switch (id) { case CLKID_MPLL0: @@ -665,10 +664,10 @@ static ulong meson_mpll_get_rate(struct clk *clk, unsigned long id) if (IS_ERR_VALUE(parent_rate)) return parent_rate; - reg = readl(priv->addr + psdm->reg_off); + regmap_read(priv->map, psdm->reg_off, ®); sdm = PARM_GET(psdm->width, psdm->shift, reg); - reg = readl(priv->addr + pn2->reg_off); + regmap_read(priv->map, pn2->reg_off, ®); n2 = PARM_GET(pn2->width, pn2->shift, reg); return mpll_rate_from_params(parent_rate, sdm, n2); @@ -692,7 +691,7 @@ static ulong meson_pll_get_rate(struct clk *clk, unsigned long id) struct parm *pm, *pn, *pod; unsigned long parent_rate_mhz = XTAL_RATE / 1000000; u16 n, m, od; - u32 reg; + uint reg; switch (id) { case CLKID_FIXED_PLL: @@ -709,13 +708,13 @@ static ulong meson_pll_get_rate(struct clk *clk, unsigned long id) return -ENOENT; } - reg = readl(priv->addr + pn->reg_off); + regmap_read(priv->map, pn->reg_off, ®); n = PARM_GET(pn->width, pn->shift, reg); - reg = readl(priv->addr + pm->reg_off); + regmap_read(priv->map, pm->reg_off, ®); m = PARM_GET(pm->width, pm->shift, reg); - reg = readl(priv->addr + pod->reg_off); + regmap_read(priv->map, pod->reg_off, ®); od = PARM_GET(pod->width, pod->shift, reg); return ((parent_rate_mhz * m / n) >> od) * 1000000; @@ -876,8 +875,8 @@ static ulong meson_clk_set_rate(struct clk *clk, ulong rate) if (IS_ERR_VALUE(ret)) return ret; - printf("clock %lu has new rate %lu\n", clk->id, - meson_clk_get_rate_by_id(clk, clk->id)); + debug("clock %lu has new rate %lu\n", clk->id, + meson_clk_get_rate_by_id(clk, clk->id)); return 0; } @@ -886,9 +885,11 @@ static int meson_clk_probe(struct udevice *dev) { struct meson_clk *priv = dev_get_priv(dev); - priv->addr = dev_read_addr_ptr(dev); + priv->map = syscon_node_to_regmap(dev_get_parent(dev)->node); + if (IS_ERR(priv->map)) + return PTR_ERR(priv->map); - debug("meson-clk: probed at addr %p\n", priv->addr); + debug("meson-clk: probed\n"); return 0; } -- 2.25.1