From 894c3ad27fa940beb7fdc07d01dcfe81c03d0481 Mon Sep 17 00:00:00 2001 From: Thomas Fitzsimmons Date: Fri, 8 Jun 2018 17:59:45 -0400 Subject: [PATCH] board: arm: Add support for Broadcom BCM7445 Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons Cc: Stefan Roese Cc: Tom Rini Cc: Florian Fainelli --- MAINTAINERS | 10 + arch/arm/Kconfig | 12 + arch/arm/Makefile | 1 + arch/arm/mach-bcmstb/Kconfig | 36 ++ arch/arm/mach-bcmstb/Makefile | 8 + arch/arm/mach-bcmstb/include/mach/gpio.h | 11 + arch/arm/mach-bcmstb/include/mach/hardware.h | 11 + .../mach-bcmstb/include/mach/prior_stage.h | 30 ++ arch/arm/mach-bcmstb/include/mach/sdhci.h | 15 + arch/arm/mach-bcmstb/include/mach/timer.h | 13 + arch/arm/mach-bcmstb/lowlevel_init.S | 21 + board/broadcom/bcmstb/MAINTAINERS | 7 + board/broadcom/bcmstb/Makefile | 8 + board/broadcom/bcmstb/bcmstb.c | 194 ++++++++ configs/bcm7445_defconfig | 27 ++ doc/README.bcm7xxx | 150 ++++++ drivers/mmc/Kconfig | 11 + drivers/mmc/Makefile | 1 + drivers/mmc/bcmstb_sdhci.c | 67 +++ drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/bcmstb_spi.c | 439 ++++++++++++++++++ drivers/spi/spi-uclass.c | 2 +- dts/Kconfig | 7 + include/configs/bcm7445.h | 26 ++ include/configs/bcmstb.h | 183 ++++++++ include/fdtdec.h | 4 + lib/fdtdec.c | 4 + 28 files changed, 1305 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-bcmstb/Kconfig create mode 100644 arch/arm/mach-bcmstb/Makefile create mode 100644 arch/arm/mach-bcmstb/include/mach/gpio.h create mode 100644 arch/arm/mach-bcmstb/include/mach/hardware.h create mode 100644 arch/arm/mach-bcmstb/include/mach/prior_stage.h create mode 100644 arch/arm/mach-bcmstb/include/mach/sdhci.h create mode 100644 arch/arm/mach-bcmstb/include/mach/timer.h create mode 100644 arch/arm/mach-bcmstb/lowlevel_init.S create mode 100644 board/broadcom/bcmstb/MAINTAINERS create mode 100644 board/broadcom/bcmstb/Makefile create mode 100644 board/broadcom/bcmstb/bcmstb.c create mode 100644 configs/bcm7445_defconfig create mode 100644 doc/README.bcm7xxx create mode 100644 drivers/mmc/bcmstb_sdhci.c create mode 100644 drivers/spi/bcmstb_spi.c create mode 100644 include/configs/bcm7445.h create mode 100644 include/configs/bcmstb.h diff --git a/MAINTAINERS b/MAINTAINERS index d582e56222..570bc6d1a5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -107,6 +107,16 @@ F: drivers/video/bcm2835.c F: include/dm/platform_data/serial_bcm283x_mu.h F: drivers/pinctrl/broadcom/ +ARM BROADCOM BCMSTB +M: Thomas Fitzsimmons +S: Maintained +F: arch/arm/mach-bcmstb/ +F: board/broadcom/bcmstb/ +F: configs/bcm7445_defconfig +F: doc/README.bcm7xxx +F: drivers/mmc/bcmstb_sdhci.c +F: drivers/spi/bcmstb_spi.c + ARM FREESCALE IMX M: Stefano Babic M: Fabio Estevam diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 82140efb99..4fbb424037 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -542,6 +542,16 @@ config TARGET_VEXPRESS_CA15_TC2 select CPU_V7_HAS_VIRT select PL011_SERIAL +config ARCH_BCMSTB + bool "Broadcom BCM7XXX family" + select CPU_V7A + select DM + select OF_CONTROL + select OF_PRIOR_STAGE + help + This enables support for Broadcom ARM-based set-top box + chipsets, including the 7445 family of chips. + config TARGET_VEXPRESS_CA5X2 bool "Support vexpress_ca5x2" select CPU_V7A @@ -1326,6 +1336,8 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm283x/Kconfig" +source "arch/arm/mach-bcmstb/Kconfig" + source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-exynos/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f15b2287df..cac58bdc4d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -54,6 +54,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y) machine-$(CONFIG_ARCH_ASPEED) += aspeed machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_BCM283X) += bcm283x +machine-$(CONFIG_ARCH_BCMSTB) += bcmstb machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_HIGHBANK) += highbank diff --git a/arch/arm/mach-bcmstb/Kconfig b/arch/arm/mach-bcmstb/Kconfig new file mode 100644 index 0000000000..6c7952ffe5 --- /dev/null +++ b/arch/arm/mach-bcmstb/Kconfig @@ -0,0 +1,36 @@ +if ARCH_BCMSTB + +config TARGET_BCM7445 + bool "Broadcom 7445 TSBL" + depends on ARCH_BCMSTB + help + Support for the Broadcom 7445 SoC. This port assumes BOLT + is acting as the second stage bootloader, and U-Boot is + acting as the third stage bootloader (TSBL), loaded by BOLT. + This port may work on other BCM7xxx boards with + configuration changes. + +config SYS_CPU + default "armv7" + +config SYS_BOARD + default "bcmstb" + +config SYS_VENDOR + default "broadcom" + +config SYS_SOC + default "bcmstb" + +config SYS_CONFIG_NAME + default "bcm7445" + +config SYS_FDT_SAVE_ADDRESS + hex "Address to which the prior stage provided DTB will be copied" + default 0x1f00000 + +config BCMSTB_SDHCI_INDEX + int "Index of preferred BCMSTB SDHCI alias in DTB" + default 1 + +endif diff --git a/arch/arm/mach-bcmstb/Makefile b/arch/arm/mach-bcmstb/Makefile new file mode 100644 index 0000000000..71e5727e41 --- /dev/null +++ b/arch/arm/mach-bcmstb/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2018 Cisco Systems, Inc. +# +# Author: Thomas Fitzsimmons +# + +obj-y := lowlevel_init.o diff --git a/arch/arm/mach-bcmstb/include/mach/gpio.h b/arch/arm/mach-bcmstb/include/mach/gpio.h new file mode 100644 index 0000000000..bffecf9bde --- /dev/null +++ b/arch/arm/mach-bcmstb/include/mach/gpio.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + */ + +#ifndef _BCMSTB_GPIO_H +#define _BCMSTB_GPIO_H + +#endif /* _BCMSTB_GPIO_H */ diff --git a/arch/arm/mach-bcmstb/include/mach/hardware.h b/arch/arm/mach-bcmstb/include/mach/hardware.h new file mode 100644 index 0000000000..76f799d024 --- /dev/null +++ b/arch/arm/mach-bcmstb/include/mach/hardware.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + */ + +#ifndef _BCMSTB_HARDWARE_H +#define _BCMSTB_HARDWARE_H + +#endif /* _BCMSTB_HARDWARE_H */ diff --git a/arch/arm/mach-bcmstb/include/mach/prior_stage.h b/arch/arm/mach-bcmstb/include/mach/prior_stage.h new file mode 100644 index 0000000000..6c36c6810a --- /dev/null +++ b/arch/arm/mach-bcmstb/include/mach/prior_stage.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + */ + +#ifndef _BCMSTB_PRIOR_STAGE_H +#define _BCMSTB_PRIOR_STAGE_H + +#ifndef __ASSEMBLY__ + +#include + +struct bcmstb_boot_parameters { + u32 r0; + u32 r1; + u32 r2; + u32 r3; + u32 sp; + u32 lr; +}; + +extern struct bcmstb_boot_parameters bcmstb_boot_parameters; + +extern phys_addr_t prior_stage_fdt_address; + +#endif /* __ASSEMBLY__ */ + +#endif /* _BCMSTB_PRIOR_STAGE_H */ diff --git a/arch/arm/mach-bcmstb/include/mach/sdhci.h b/arch/arm/mach-bcmstb/include/mach/sdhci.h new file mode 100644 index 0000000000..243783d682 --- /dev/null +++ b/arch/arm/mach-bcmstb/include/mach/sdhci.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + */ + +#ifndef _BCMSTB_SDHCI_H +#define _BCMSTB_SDHCI_H + +#include + +int bcmstb_sdhci_init(phys_addr_t regbase); + +#endif /* _BCMSTB_SDHCI_H */ diff --git a/arch/arm/mach-bcmstb/include/mach/timer.h b/arch/arm/mach-bcmstb/include/mach/timer.h new file mode 100644 index 0000000000..d05b4d64fe --- /dev/null +++ b/arch/arm/mach-bcmstb/include/mach/timer.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + */ + +#ifndef _BCMSTB_TIMER_H +#define _BCMSTB_TIMER_H + +unsigned long timer_read_counter(void); + +#endif /* _BCMSTB_TIMER_H */ diff --git a/arch/arm/mach-bcmstb/lowlevel_init.S b/arch/arm/mach-bcmstb/lowlevel_init.S new file mode 100644 index 0000000000..aa81f70248 --- /dev/null +++ b/arch/arm/mach-bcmstb/lowlevel_init.S @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + */ + +#include + +ENTRY(save_boot_params) + ldr r6, =bcmstb_boot_parameters + str r0, [r6, #0] + str r1, [r6, #4] + str r2, [r6, #8] + str r3, [r6, #12] + str sp, [r6, #16] + str lr, [r6, #20] + ldr r6, =prior_stage_fdt_address + str r2, [r6] + b save_boot_params_ret +ENDPROC(save_boot_params) diff --git a/board/broadcom/bcmstb/MAINTAINERS b/board/broadcom/bcmstb/MAINTAINERS new file mode 100644 index 0000000000..5851cb9978 --- /dev/null +++ b/board/broadcom/bcmstb/MAINTAINERS @@ -0,0 +1,7 @@ +BCM7445 BOARD +M: Thomas Fitzsimmons +S: Maintained +F: board/broadcom/bcmstb/ +F: include/configs/bcmstb.h +F: include/configs/bcm7445.h +F: configs/bcm7445_defconfig diff --git a/board/broadcom/bcmstb/Makefile b/board/broadcom/bcmstb/Makefile new file mode 100644 index 0000000000..9609887760 --- /dev/null +++ b/board/broadcom/bcmstb/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2018 Cisco Systems, Inc. +# +# Author: Thomas Fitzsimmons +# + +obj-y := bcmstb.o diff --git a/board/broadcom/bcmstb/bcmstb.c b/board/broadcom/bcmstb/bcmstb.c new file mode 100644 index 0000000000..25cd354998 --- /dev/null +++ b/board/broadcom/bcmstb/bcmstb.c @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define BCMSTB_DATA_SECTION __attribute__((section(".data"))) + +struct bcmstb_boot_parameters bcmstb_boot_parameters BCMSTB_DATA_SECTION; + +phys_addr_t prior_stage_fdt_address BCMSTB_DATA_SECTION; + +union reg_value_union { + const char *data; + const phys_addr_t *address; +}; + +int board_init(void) +{ + return 0; +} + +u32 get_board_rev(void) +{ + return 0; +} + +void reset_cpu(ulong ignored) +{ +} + +int print_cpuinfo(void) +{ + return 0; +} + +int dram_init(void) +{ + if (fdtdec_setup_memory_size() != 0) + return -EINVAL; + + return 0; +} + +int dram_init_banksize(void) +{ + fdtdec_setup_memory_banksize(); + + /* + * On this SoC, U-Boot is running as an ELF file. Change the + * relocation address to CONFIG_SYS_TEXT_BASE, so that in + * setup_reloc, gd->reloc_off works out to 0, effectively + * disabling relocation. Otherwise U-Boot hangs in the setup + * instructions just before relocate_code in + * arch/arm/lib/crt0.S. + */ + gd->relocaddr = CONFIG_SYS_TEXT_BASE; + + return 0; +} + +void enable_caches(void) +{ + /* + * This port assumes that the prior stage bootloader has + * enabled I-cache and D-cache already. Implementing this + * function silences the warning in the default function. + */ +} + +static const phys_addr_t bcmstb_sdhci_address(u32 alias_index) +{ + int node = 0; + int ret = 0; + char sdhci[16] = { 0 }; + const void *fdt = gd->fdt_blob; + const char *path = NULL; + struct fdt_resource resource = { 0 }; + + if (!fdt) { + printf("%s: Invalid gd->fdt_blob\n", __func__); + return 0; + } + + node = fdt_path_offset(fdt, "/aliases"); + if (node < 0) { + printf("%s: Failed to find /aliases node\n", __func__); + return 0; + } + + sprintf(sdhci, "sdhci%d", alias_index); + path = fdt_getprop(fdt, node, sdhci, NULL); + if (!path) { + printf("%s: Failed to find alias for %s\n", __func__, sdhci); + return 0; + } + + node = fdt_path_offset(fdt, path); + if (node < 0) { + printf("%s: Failed to resolve BCMSTB SDHCI alias\n", __func__); + return 0; + } + + ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", + "host", &resource); + if (ret) { + printf("%s: Failed to read BCMSTB SDHCI host resource\n", + __func__); + return 0; + } + + return resource.start; +} + +int board_mmc_init(bd_t *bis) +{ + phys_addr_t sdhci_base_address = 0; + + sdhci_base_address = bcmstb_sdhci_address(CONFIG_BCMSTB_SDHCI_INDEX); + + if (!sdhci_base_address) { + sdhci_base_address = BCMSTB_SDHCI_BASE; + printf("%s: Assuming BCMSTB SDHCI address: 0x%p\n", + __func__, (void *)sdhci_base_address); + } + + debug("BCMSTB SDHCI base address: 0x%p\n", (void *)sdhci_base_address); + + bcmstb_sdhci_init(sdhci_base_address); + + return 0; +} + +int timer_init(void) +{ + gd->arch.timer_rate_hz = readl(BCMSTB_TIMER_FREQUENCY); + + return 0; +} + +ulong get_tbclk(void) +{ + return gd->arch.timer_rate_hz; +} + +uint64_t get_ticks(void) +{ + gd->timebase_h = readl(BCMSTB_TIMER_HIGH); + gd->timebase_l = readl(BCMSTB_TIMER_LOW); + + return ((uint64_t)gd->timebase_h << 32) | gd->timebase_l; +} + +int board_late_init(void) +{ + debug("Arguments from prior stage bootloader:\n"); + debug("General Purpose Register 0: 0x%x\n", bcmstb_boot_parameters.r0); + debug("General Purpose Register 1: 0x%x\n", bcmstb_boot_parameters.r1); + debug("General Purpose Register 2: 0x%x\n", bcmstb_boot_parameters.r2); + debug("General Purpose Register 3: 0x%x\n", bcmstb_boot_parameters.r3); + debug("Stack Pointer Register: 0x%x\n", bcmstb_boot_parameters.sp); + debug("Link Register: 0x%x\n", bcmstb_boot_parameters.lr); + debug("Assuming timer frequency register at: 0x%p\n", + (void *)BCMSTB_TIMER_FREQUENCY); + debug("Read timer frequency (in Hz): %ld\n", gd->arch.timer_rate_hz); + debug("Prior stage provided DTB at: 0x%p\n", + (void *)prior_stage_fdt_address); + + /* + * Set fdtcontroladdr in the environment so that scripts can + * refer to it, for example, to reuse it for fdtaddr. + */ + env_set_hex("fdtcontroladdr", prior_stage_fdt_address); + + /* + * Do not set machid to the machine identifier value provided + * by the prior stage bootloader (bcmstb_boot_parameters.r1) + * because we're using a device tree to boot Linux. + */ + + return 0; +} diff --git a/configs/bcm7445_defconfig b/configs/bcm7445_defconfig new file mode 100644 index 0000000000..46dea17563 --- /dev/null +++ b/configs/bcm7445_defconfig @@ -0,0 +1,27 @@ +CONFIG_ARM=y +CONFIG_ARCH_BCMSTB=y +CONFIG_TARGET_BCM7445=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_OF_CONTROL=y +CONFIG_OF_PRIOR_STAGE=y +CONFIG_DM=y +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI=y +CONFIG_SPI_FLASH=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_BCMSTB_SPI=y +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_RSA=y +CONFIG_BLK=n +CONFIG_SDHCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_BCMSTB=y +CONFIG_CONS_INDEX=3 +CONFIG_BOOTDELAY=1 +CONFIG_SYS_PROMPT="U-Boot>" +CONFIG_HUSH_PARSER=y +CONFIG_SYS_TEXT_BASE=0x80100000 +CONFIG_SYS_NS16550_COM3=0xf040ab00 +CONFIG_EFI_LOADER=n diff --git a/doc/README.bcm7xxx b/doc/README.bcm7xxx new file mode 100644 index 0000000000..9b5eae4741 --- /dev/null +++ b/doc/README.bcm7xxx @@ -0,0 +1,150 @@ +Summary +======= + +This document describes how to use U-Boot on the Broadcom 7445 SoC, as +a third stage bootloader loaded by Broadcom's BOLT bootloader. + +BOLT loads U-Boot as a generic ELF binary. Some U-Boot features such +as networking are not yet available but other important features are, +including: + + - ext4 file system traversal + + - support for loading FIT images + + - advanced scripting + + - support for FIT-provided DTBs instead of relying on the + BOLT-provided DTB + +A customized version of this port has been used in production. The +same approach may work on other BCM7xxx boards, with some +configuration adjustments and memory layout experimentation. + +Build +===== + +make bcm7445_defconfig +make +${CROSS_COMPILE}strip u-boot + +Run +=== + +Flash the u-boot binary into board storage, then invoke it from BOLT. +For example: + +BOLT> boot -bsu -elf flash0.u-boot1 + +This port assumes that I-cache and D-cache are already enabled when +U-Boot is entered. + +Flattened Image Tree Support +============================ + +What follows is an example FIT image source file. Build it with: + +mkimage -f image.its image.itb + +Booting the resulting image.itb was tested on BOLT v1.20, with the +following kernels: + +https://github.com/Broadcom/stblinux-3.14 +https://github.com/Broadcom/stblinux-4.1 +https://github.com/Broadcom/stblinux-4.9 + +and with a generic ARMv7 root file system. + +image.its: +/dts-v1/; +/ { + description = "BCM7445 FIT"; + images { + kernel@1 { + description = "Linux kernel"; + /* + * This kernel image output format can be + * generated with: + * + * make vmlinux + * ${CROSS_COMPILE}objcopy -O binary -S vmlinux vmlinux.bin + * gzip -9 vmlinux.bin + * + * For stblinux-3.14, the specific Broadcom + * board type should be configured in the + * kernel, for example CONFIG_BCM7445D0=y. + */ + data = /incbin/(""); + type = "kernel"; + arch = "arm"; + os = "linux"; + compression = "gzip"; + load = <0x8000>; + entry = <0x8000>; + hash@1 { + algo = "sha256"; + }; + }; + ramdisk@1 { + description = "Initramfs root file system"; + data = /incbin/(""); + type = "ramdisk"; + arch = "arm"; + os = "linux"; + compression = "gzip"; + /* + * Set the environment variable initrd_high to + * 0xffffffff, and set "load" and "entry" here + * to 0x0 to keep initramfs in-place and to + * accommodate stblinux bmem/CMA reservations. + */ + load = <0x0>; + entry = <0x0>; + hash@1 { + algo = "sha256"; + }; + }; + fdt@1 { + description = "Device tree dumped from BOLT"; + /* + * This DTB should be similar to the + * BOLT-generated device tree, after BOLT has + * done its runtime modifications to it. For + * example, it can be dumped from within + * U-Boot (at ${fdtcontroladdr}), after BOLT + * has loaded U-Boot. The result can be added + * to the Linux source tree as a .dts file. + * + * To support modifications to the device tree + * in-place in U-Boot, add to Linux's + * arch/arm/boot/dts/Makefile: + * + * DTC_FLAGS ?= -p 4096 + * + * This will leave some padding in the DTB and + * thus reserve room for node additions. + * + * Also, set the environment variable fdt_high + * to 0xffffffff to keep the DTB in-place and + * to accommodate stblinux bmem/CMA + * reservations. + */ + data = /incbin/(".dtb"); + type = "flat_dt"; + arch = "arm"; + compression = "none"; + hash@1 { + algo = "sha256"; + }; + }; + }; + configurations { + default = "conf@bcm7445"; + conf@bcm7445 { + description = "BCM7445 configuration"; + kernel = "kernel@1"; + ramdisk = "ramdisk@1"; + fdt = "fdt@1"; + }; + }; +}; diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 693b3ceaf0..377b1c4b3b 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -379,6 +379,17 @@ config MMC_SDHCI_BCM2835 If unsure, say N. +config MMC_SDHCI_BCMSTB + tristate "SDHCI support for the BCMSTB SD/MMC Controller" + depends on MMC_SDHCI + help + This selects the Broadcom set-top box SD/MMC controller. + + If you have a BCMSTB platform with SD or MMC devices, + say Y here. + + If unsure, say N. + config MMC_SDHCI_CADENCE bool "SDHCI support for the Cadence SD/SDIO/eMMC controller" depends on BLK && DM_MMC diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 3a9805dad9..f6191862d6 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_STM32_SDMMC2) += stm32_sdmmc2.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_ATMEL) += atmel_sdhci.o obj-$(CONFIG_MMC_SDHCI_BCM2835) += bcm2835_sdhci.o +obj-$(CONFIG_MMC_SDHCI_BCMSTB) += bcmstb_sdhci.o obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o obj-$(CONFIG_MMC_SDHCI_KONA) += kona_sdhci.o obj-$(CONFIG_MMC_SDHCI_MSM) += msm_sdhci.o diff --git a/drivers/mmc/bcmstb_sdhci.c b/drivers/mmc/bcmstb_sdhci.c new file mode 100644 index 0000000000..443ae8d481 --- /dev/null +++ b/drivers/mmc/bcmstb_sdhci.c @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + */ + +#include +#include +#include +#include + +/* + * The BCMSTB SDHCI has a quirk in that its actual maximum frequency + * capability is 100 MHz. The divisor that is eventually written to + * SDHCI_CLOCK_CONTROL is calculated based on what the MMC device + * reports, and relative to this maximum frequency. + * + * This define used to be set to 52000000 (52 MHz), the desired + * maximum frequency, but that would result in the communication + * actually running at 100 MHz (seemingly without issue), which is + * out-of-spec. + * + * Now, by setting this to 0 (auto-detect), 100 MHz will be read from + * the capabilities register, and the resulting divisor will be + * doubled, meaning that the clock control register will be set to the + * in-spec 52 MHz value. + */ +#define BCMSTB_SDHCI_MAXIMUM_CLOCK_FREQUENCY 0 +/* + * When the minimum clock frequency is set to 0 (auto-detect), U-Boot + * sets it to 100 MHz divided by SDHCI_MAX_DIV_SPEC_300, or 48,875 Hz, + * which results in the controller timing out when trying to + * communicate with the MMC device. Hard-code this value to 400000 + * (400 kHz) to prevent this. + */ +#define BCMSTB_SDHCI_MINIMUM_CLOCK_FREQUENCY 400000 + +static char *BCMSTB_SDHCI_NAME = "bcmstb-sdhci"; + +/* + * This driver has only been tested with eMMC devices; SD devices may + * not work. + */ +int bcmstb_sdhci_init(phys_addr_t regbase) +{ + struct sdhci_host *host = NULL; + + host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); + if (!host) { + printf("%s: Failed to allocate memory\n", __func__); + return 1; + } + memset(host, 0, sizeof(*host)); + + host->name = BCMSTB_SDHCI_NAME; + host->ioaddr = (void *)regbase; + host->quirks = 0; + + host->cfg.part_type = PART_TYPE_DOS; + + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + + return add_sdhci(host, + BCMSTB_SDHCI_MAXIMUM_CLOCK_FREQUENCY, + BCMSTB_SDHCI_MINIMUM_CLOCK_FREQUENCY); +} diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 3532c2ad46..f5960a7c95 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -66,6 +66,13 @@ config BCM63XX_SPI access the SPI NOR flash on platforms embedding these Broadcom SPI cores. +config BCMSTB_SPI + bool "BCMSTB SPI driver" + help + Enable the Broadcom set-top box SPI driver. This driver can + be used to access the SPI flash on platforms embedding this + Broadcom SPI core. + config CADENCE_QSPI bool "Cadence QSPI driver" help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 5a2c00eafa..e73b0cd7d5 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_ATH79_SPI) += ath79_spi.o obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o obj-$(CONFIG_BCM63XX_HSSPI) += bcm63xx_hsspi.o obj-$(CONFIG_BCM63XX_SPI) += bcm63xx_spi.o +obj-$(CONFIG_BCMSTB_SPI) += bcmstb_spi.o obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o obj-$(CONFIG_CF_SPI) += cf_spi.o obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o diff --git a/drivers/spi/bcmstb_spi.c b/drivers/spi/bcmstb_spi.c new file mode 100644 index 0000000000..fb1dc46b70 --- /dev/null +++ b/drivers/spi/bcmstb_spi.c @@ -0,0 +1,439 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define SPBR_MIN 8 +#define BITS_PER_WORD 8 + +#define NUM_TXRAM 32 +#define NUM_RXRAM 32 +#define NUM_CDRAM 16 + +/* hif_mspi register structure. */ +struct bcmstb_hif_mspi_regs { + u32 spcr0_lsb; /* 0x000 */ + u32 spcr0_msb; /* 0x004 */ + u32 spcr1_lsb; /* 0x008 */ + u32 spcr1_msb; /* 0x00c */ + u32 newqp; /* 0x010 */ + u32 endqp; /* 0x014 */ + u32 spcr2; /* 0x018 */ + u32 reserved0; /* 0x01c */ + u32 mspi_status; /* 0x020 */ + u32 cptqp; /* 0x024 */ + u32 spcr3; /* 0x028 */ + u32 revision; /* 0x02c */ + u32 reserved1[4]; /* 0x030 */ + u32 txram[NUM_TXRAM]; /* 0x040 */ + u32 rxram[NUM_RXRAM]; /* 0x0c0 */ + u32 cdram[NUM_CDRAM]; /* 0x140 */ + u32 write_lock; /* 0x180 */ +}; + +/* hif_mspi masks. */ +#define HIF_MSPI_SPCR2_CONT_AFTER_CMD_MASK 0x00000080 +#define HIF_MSPI_SPCR2_SPE_MASK 0x00000040 +#define HIF_MSPI_SPCR2_SPIFIE_MASK 0x00000020 +#define HIF_MSPI_WRITE_LOCK_WRITE_LOCK_MASK 0x00000001 + +/* bspi offsets. */ +#define BSPI_MAST_N_BOOT_CTRL 0x008 + +/* bspi_raf is not used in this driver. */ + +/* hif_spi_intr2 offsets and masks. */ +#define HIF_SPI_INTR2_CPU_CLEAR 0x08 +#define HIF_SPI_INTR2_CPU_MASK_SET 0x10 +#define HIF_SPI_INTR2_CPU_MASK_CLEAR 0x14 +#define HIF_SPI_INTR2_CPU_SET_MSPI_DONE_MASK 0x00000020 + +/* SPI transfer timeout in milliseconds. */ +#define HIF_MSPI_WAIT 10 + +enum bcmstb_base_type { + HIF_MSPI, + BSPI, + HIF_SPI_INTR2, + CS_REG, + BASE_LAST, +}; + +struct bcmstb_spi_platdata { + void *base[4]; +}; + +struct bcmstb_spi_priv { + struct bcmstb_hif_mspi_regs *regs; + void *bspi; + void *hif_spi_intr2; + void *cs_reg; + int default_cs; + int curr_cs; + uint tx_slot; + uint rx_slot; + u8 saved_cmd[NUM_CDRAM]; + uint saved_cmd_len; + void *saved_din_addr; +}; + +static int bcmstb_spi_ofdata_to_platdata(struct udevice *bus) +{ + struct bcmstb_spi_platdata *plat = dev_get_platdata(bus); + const void *fdt = gd->fdt_blob; + int node = dev_of_offset(bus); + int ret = 0; + int i = 0; + struct fdt_resource resource = { 0 }; + char *names[BASE_LAST] = { "hif_mspi", "bspi", "hif_spi_intr2", + "cs_reg" }; + const phys_addr_t defaults[BASE_LAST] = { BCMSTB_HIF_MSPI_BASE, + BCMSTB_BSPI_BASE, + BCMSTB_HIF_SPI_INTR2, + BCMSTB_CS_REG }; + + for (i = 0; i < BASE_LAST; i++) { + plat->base[i] = (void *)defaults[i]; + + ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", + names[i], &resource); + if (ret) { + printf("%s: Assuming BCMSTB SPI %s address 0x0x%p\n", + __func__, names[i], (void *)defaults[i]); + } else { + plat->base[i] = (void *)resource.start; + debug("BCMSTB SPI %s address: 0x0x%p\n", + names[i], (void *)plat->base[i]); + } + } + + return 0; +} + +static void bcmstb_spi_hw_set_parms(struct bcmstb_spi_priv *priv) +{ + writel(SPBR_MIN, &priv->regs->spcr0_lsb); + writel(BITS_PER_WORD << 2 | SPI_MODE_3, &priv->regs->spcr0_msb); +} + +static void bcmstb_spi_enable_interrupt(void *base, u32 mask) +{ + void *reg = base + HIF_SPI_INTR2_CPU_MASK_CLEAR; + + writel(readl(reg) | mask, reg); + readl(reg); +} + +static void bcmstb_spi_disable_interrupt(void *base, u32 mask) +{ + void *reg = base + HIF_SPI_INTR2_CPU_MASK_SET; + + writel(readl(reg) | mask, reg); + readl(reg); +} + +static void bcmstb_spi_clear_interrupt(void *base, u32 mask) +{ + void *reg = base + HIF_SPI_INTR2_CPU_CLEAR; + + writel(readl(reg) | mask, reg); + readl(reg); +} + +static int bcmstb_spi_probe(struct udevice *bus) +{ + struct bcmstb_spi_platdata *plat = dev_get_platdata(bus); + struct bcmstb_spi_priv *priv = dev_get_priv(bus); + + priv->regs = plat->base[HIF_MSPI]; + priv->bspi = plat->base[BSPI]; + priv->hif_spi_intr2 = plat->base[HIF_SPI_INTR2]; + priv->cs_reg = plat->base[CS_REG]; + priv->default_cs = 0; + priv->curr_cs = -1; + priv->tx_slot = 0; + priv->rx_slot = 0; + memset(priv->saved_cmd, 0, NUM_CDRAM); + priv->saved_cmd_len = 0; + priv->saved_din_addr = NULL; + + debug("spi_xfer: tx regs: 0x%p\n", &priv->regs->txram[0]); + debug("spi_xfer: rx regs: 0x%p\n", &priv->regs->rxram[0]); + + /* Disable BSPI. */ + writel(1, priv->bspi + BSPI_MAST_N_BOOT_CTRL); + readl(priv->bspi + BSPI_MAST_N_BOOT_CTRL); + + /* Set up interrupts. */ + bcmstb_spi_disable_interrupt(priv->hif_spi_intr2, 0xffffffff); + bcmstb_spi_clear_interrupt(priv->hif_spi_intr2, 0xffffffff); + bcmstb_spi_enable_interrupt(priv->hif_spi_intr2, + HIF_SPI_INTR2_CPU_SET_MSPI_DONE_MASK); + + /* Set up control registers. */ + writel(0, &priv->regs->spcr1_lsb); + writel(0, &priv->regs->spcr1_msb); + writel(0, &priv->regs->newqp); + writel(0, &priv->regs->endqp); + writel(HIF_MSPI_SPCR2_SPIFIE_MASK, &priv->regs->spcr2); + writel(0, &priv->regs->spcr3); + + bcmstb_spi_hw_set_parms(priv); + + return 0; +} + +static void bcmstb_spi_submit(struct bcmstb_spi_priv *priv, bool done) +{ + debug("WR NEWQP: %d\n", 0); + writel(0, &priv->regs->newqp); + + debug("WR ENDQP: %d\n", priv->tx_slot - 1); + writel(priv->tx_slot - 1, &priv->regs->endqp); + + if (done) { + debug("WR CDRAM[%d]: %02x\n", priv->tx_slot - 1, + readl(&priv->regs->cdram[priv->tx_slot - 1]) & ~0x80); + writel(readl(&priv->regs->cdram[priv->tx_slot - 1]) & ~0x80, + &priv->regs->cdram[priv->tx_slot - 1]); + } + + /* Force chip select first time. */ + if (priv->curr_cs != priv->default_cs) { + debug("spi_xfer: switching chip select to %d\n", + priv->default_cs); + writel((readl(priv->cs_reg) & ~0xff) | (1 << priv->default_cs), + priv->cs_reg); + readl(priv->cs_reg); + udelay(10); + priv->curr_cs = priv->default_cs; + } + + debug("WR WRITE_LOCK: %02x\n", 1); + writel((readl(&priv->regs->write_lock) & + ~HIF_MSPI_WRITE_LOCK_WRITE_LOCK_MASK) | 1, + &priv->regs->write_lock); + readl(&priv->regs->write_lock); + + debug("WR SPCR2: %02x\n", + HIF_MSPI_SPCR2_SPIFIE_MASK | + HIF_MSPI_SPCR2_SPE_MASK | + HIF_MSPI_SPCR2_CONT_AFTER_CMD_MASK); + writel(HIF_MSPI_SPCR2_SPIFIE_MASK | + HIF_MSPI_SPCR2_SPE_MASK | + HIF_MSPI_SPCR2_CONT_AFTER_CMD_MASK, + &priv->regs->spcr2); +} + +static int bcmstb_spi_wait(struct bcmstb_spi_priv *priv) +{ + u32 start_time = get_timer(0); + u32 status = readl(&priv->regs->mspi_status); + + while (!(status & 1)) { + if (get_timer(start_time) > HIF_MSPI_WAIT) + return -ETIMEDOUT; + status = readl(&priv->regs->mspi_status); + } + + writel(readl(&priv->regs->mspi_status) & ~1, &priv->regs->mspi_status); + bcmstb_spi_clear_interrupt(priv->hif_spi_intr2, + HIF_SPI_INTR2_CPU_SET_MSPI_DONE_MASK); + + return 0; +} + +static int bcmstb_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + uint len = bitlen / 8; + uint tx_len = len; + uint rx_len = len; + const u8 *out_bytes = (u8 *)dout; + u8 *in_bytes = (u8 *)din; + struct udevice *bus = dev_get_parent(dev); + struct bcmstb_spi_priv *priv = dev_get_priv(bus); + struct bcmstb_hif_mspi_regs *regs = priv->regs; + + debug("spi_xfer: %d, t: 0x%p, r: 0x%p, f: %lx\n", + len, dout, din, flags); + debug("spi_xfer: chip select: %x\n", readl(priv->cs_reg) & 0xff); + debug("spi_xfer: tx addr: 0x%p\n", ®s->txram[0]); + debug("spi_xfer: rx addr: 0x%p\n", ®s->rxram[0]); + debug("spi_xfer: cd addr: 0x%p\n", ®s->cdram[0]); + + if (flags & SPI_XFER_END) { + debug("spi_xfer: clearing saved din address: 0x%p\n", + priv->saved_din_addr); + priv->saved_din_addr = NULL; + priv->saved_cmd_len = 0; + memset(priv->saved_cmd, 0, NUM_CDRAM); + } + + if (bitlen == 0) + return 0; + + if (bitlen % 8) { + printf("%s: Non-byte-aligned transfer\n", __func__); + return -EOPNOTSUPP; + } + + if (flags & ~(SPI_XFER_BEGIN | SPI_XFER_END)) { + printf("%s: Unsupported flags: %lx\n", __func__, flags); + return -EOPNOTSUPP; + } + + if (flags & SPI_XFER_BEGIN) { + priv->tx_slot = 0; + priv->rx_slot = 0; + + if (out_bytes && len > NUM_CDRAM) { + printf("%s: Unable to save transfer\n", __func__); + return -EOPNOTSUPP; + } + + if (out_bytes && !(flags & SPI_XFER_END)) { + /* + * This is the start of a transmit operation + * that will need repeating if the calling + * code polls for the result. Save it for + * subsequent transmission. + */ + debug("spi_xfer: saving command: %x, %d\n", + out_bytes[0], len); + priv->saved_cmd_len = len; + memcpy(priv->saved_cmd, out_bytes, priv->saved_cmd_len); + } + } + + if (!(flags & (SPI_XFER_BEGIN | SPI_XFER_END))) { + if (priv->saved_din_addr == din) { + /* + * The caller is polling for status. Repeat + * the last transmission. + */ + int ret = 0; + + debug("spi_xfer: Making recursive call\n"); + ret = bcmstb_spi_xfer(dev, priv->saved_cmd_len * 8, + priv->saved_cmd, NULL, + SPI_XFER_BEGIN); + if (ret) { + printf("%s: Recursive call failed\n", __func__); + return ret; + } + } else { + debug("spi_xfer: saving din address: 0x%p\n", din); + priv->saved_din_addr = din; + } + } + + while (rx_len > 0) { + priv->rx_slot = priv->tx_slot; + + while (priv->tx_slot < NUM_CDRAM && tx_len > 0) { + bcmstb_spi_hw_set_parms(priv); + debug("WR TXRAM[%d]: %02x\n", priv->tx_slot, + out_bytes ? out_bytes[len - tx_len] : 0xff); + writel(out_bytes ? out_bytes[len - tx_len] : 0xff, + ®s->txram[priv->tx_slot << 1]); + debug("WR CDRAM[%d]: %02x\n", priv->tx_slot, 0x8e); + writel(0x8e, ®s->cdram[priv->tx_slot]); + priv->tx_slot++; + tx_len--; + if (!in_bytes) + rx_len--; + } + + debug("spi_xfer: early return clauses: %d, %d, %d\n", + len <= NUM_CDRAM, + !in_bytes, + (flags & (SPI_XFER_BEGIN | + SPI_XFER_END)) == SPI_XFER_BEGIN); + if (len <= NUM_CDRAM && + !in_bytes && + (flags & (SPI_XFER_BEGIN | SPI_XFER_END)) == SPI_XFER_BEGIN) + return 0; + + bcmstb_spi_submit(priv, tx_len == 0); + + if (bcmstb_spi_wait(priv) == -ETIMEDOUT) { + printf("%s: Timed out\n", __func__); + return -ETIMEDOUT; + } + + priv->tx_slot %= NUM_CDRAM; + + if (in_bytes) { + while (priv->rx_slot < NUM_CDRAM && rx_len > 0) { + in_bytes[len - rx_len] = + readl(®s->rxram[(priv->rx_slot << 1) + + 1]) + & 0xff; + debug("RD RXRAM[%d]: %02x\n", + priv->rx_slot, in_bytes[len - rx_len]); + priv->rx_slot++; + rx_len--; + } + } + } + + if (flags & SPI_XFER_END) { + debug("WR WRITE_LOCK: %02x\n", 0); + writel((readl(&priv->regs->write_lock) & + ~HIF_MSPI_WRITE_LOCK_WRITE_LOCK_MASK) | 0, + &priv->regs->write_lock); + readl(&priv->regs->write_lock); + } + + return 0; +} + +static int bcmstb_spi_set_speed(struct udevice *dev, uint speed) +{ + return 0; +} + +static int bcmstb_spi_set_mode(struct udevice *dev, uint mode) +{ + return 0; +} + +static const struct dm_spi_ops bcmstb_spi_ops = { + .xfer = bcmstb_spi_xfer, + .set_speed = bcmstb_spi_set_speed, + .set_mode = bcmstb_spi_set_mode, +}; + +static const struct udevice_id bcmstb_spi_id[] = { + { .compatible = "brcm,spi-brcmstb" }, + { } +}; + +U_BOOT_DRIVER(bcmstb_spi) = { + .name = "bcmstb_spi", + .id = UCLASS_SPI, + .of_match = bcmstb_spi_id, + .ops = &bcmstb_spi_ops, + .ofdata_to_platdata = bcmstb_spi_ofdata_to_platdata, + .probe = bcmstb_spi_probe, + .platdata_auto_alloc_size = sizeof(struct bcmstb_spi_platdata), + .priv_auto_alloc_size = sizeof(struct bcmstb_spi_priv), +}; diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c index d2d091f5ea..c517d066f6 100644 --- a/drivers/spi/spi-uclass.c +++ b/drivers/spi/spi-uclass.c @@ -273,7 +273,7 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode, bool created = false; int ret; -#if CONFIG_IS_ENABLED(OF_PLATDATA) +#if CONFIG_IS_ENABLED(OF_PLATDATA) || CONFIG_IS_ENABLED(OF_PRIOR_STAGE) ret = uclass_first_device_err(UCLASS_SPI, &bus); #else ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus); diff --git a/dts/Kconfig b/dts/Kconfig index 0cef225ba9..a1a92f2bbd 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -101,6 +101,13 @@ config OF_HOSTFILE This is only useful for Sandbox. Use the -d flag to U-Boot to specify the file to read. +config OF_PRIOR_STAGE + bool "Prior stage bootloader DTB for DT control" + help + If this option is enabled, the device tree used for DT + control will be read from a device tree binary, at a memory + location passed to U-Boot by the prior stage bootloader. + endchoice config DEFAULT_DEVICE_TREE diff --git a/include/configs/bcm7445.h b/include/configs/bcm7445.h new file mode 100644 index 0000000000..f7200357eb --- /dev/null +++ b/include/configs/bcm7445.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + * + * Configuration settings for the Broadcom BCM7445 SoC family. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "bcmstb.h" + +#define CONFIG_SYS_NS16550_COM3 0xf040ab00 + +#define BCMSTB_SDHCI_BASE 0xf03e0200 +#define BCMSTB_TIMER_LOW 0xf0412008 +#define BCMSTB_TIMER_HIGH 0xf041200c +#define BCMSTB_TIMER_FREQUENCY 0xf0412020 +#define BCMSTB_HIF_MSPI_BASE 0xf03e3400 +#define BCMSTB_BSPI_BASE 0xf03e3200 +#define BCMSTB_HIF_SPI_INTR2 0xf03e1a00 +#define BCMSTB_CS_REG 0xf03e0920 + +#endif /* __CONFIG_H */ diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h new file mode 100644 index 0000000000..8c6178042e --- /dev/null +++ b/include/configs/bcmstb.h @@ -0,0 +1,183 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2018 Cisco Systems, Inc. + * + * Author: Thomas Fitzsimmons + * + * Configuration settings for the Broadcom BCMSTB SoC family. + */ + +#ifndef __BCMSTB_H +#define __BCMSTB_H + +#include "version.h" +#include +#include + +/* + * Generic board configuration. + */ +#define CONFIG_SYS_GENERIC_BOARD + +/* + * CPU configuration. + */ +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* + * Memory configuration. + * + * The prior stage BOLT bootloader sets up memory for us. + * + * An example boot memory layout after loading everything is: + * + * 0x0000 8000 vmlinux.bin.gz + * : [~31 MiB uncompressed max] + * 0x01ef f000 FIT containing signed public key + * : [~2 KiB in size] + * 0x01f0 0000 DTB copied from prior-stage-provided region + * : [~1 MiB max] + * 0x0200 0000 FIT containing ramdisk and device tree + * : initramfs.cpio.gz + * : [~208 MiB uncompressed max, to CMA/bmem low address] + * : [~80 MiB compressed max, to PSB low address] + * : device tree binary + * : [~60 KiB] + * 0x0700 0000 Prior stage bootloader (PSB) + * : + * 0x0761 7000 Prior-stage-provided device tree binary (DTB) + * : [~40 KiB in size] + * 0x0f00 0000 Contiguous memory allocator (CMA/bmem) low address + * : + * 0x8010 0000 U-Boot code at ELF load address + * : [~500 KiB in size, stripped] + * 0xc000 0000 Top of RAM + * + * Setting gd->relocaddr to CONFIG_SYS_TEXT_BASE in dram_init_banksize + * prevents U-Boot from relocating itself when it is run as an ELF + * program by the prior stage bootloader. + * + * We want to keep the ramdisk and FDT in the FIT image in-place, to + * accommodate stblinux's bmem and CMA regions. To accomplish this, + * we set initrd_high and fdt_high to 0xffffffff, and the load and + * entry addresses of the FIT ramdisk entry to 0x0. + * + * Overwriting the prior stage bootloader causes memory instability, + * so the compressed initramfs needs to fit between the load address + * and the PSB low address. In BOLT's default configuration this + * limits the compressed size of the initramfs to approximately 80 + * MiB. However, BOLT can be configured to allow loading larger + * initramfs images, in which case this limitation is eliminated. + */ +#define CONFIG_NR_DRAM_BANKS 3 + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x80200000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_MALLOC_LEN ((10 * 1024) << 10) /* 10 MiB */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 + +/* + * CONFIG_SYS_LOAD_ADDR - 1 MiB. + */ +#define CONFIG_SYS_FDT_SAVE_ADDRESS 0x1f00000 +#define CONFIG_SYS_CBSIZE 512 +#define CONFIG_SYS_MAXARGS 32 + +/* + * Large kernel image bootm configuration. + */ +#define CONFIG_SYS_BOOTM_LEN SZ_64M + +/* + * NS16550 configuration. + */ +#define V_NS16550_CLK 81000000 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * Serial console configuration. + */ +#define CONFIG_SERIAL3 3 + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ + 115200} + +/* + * Informational display configuration. + */ +#define CONFIG_REVISION_TAG + +/* + * Command configuration. + */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF_TEST +#define CONFIG_CMD_MMC + +/* + * Flash configuration. + */ +#define CONFIG_ST_SMI +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_MACRONIX + +/* + * Filesystem configuration. + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT4 +#define CONFIG_FS_EXT4 +#define CONFIG_CMD_FS_GENERIC + +/* + * Environment configuration. + */ +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT + +#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +#define CONFIG_ENV_OFFSET 0x1e0000 +#define CONFIG_ENV_SIZE (64 << 10) /* 64 KiB */ +#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_OVERWRITE + +/* + * Save the prior stage provided DTB. + */ +#define CONFIG_PREBOOT \ + "fdt addr ${fdtcontroladdr};" \ + "fdt move ${fdtcontroladdr} ${fdtsaveaddr};" \ + "fdt addr ${fdtsaveaddr};" +/* + * Enable in-place RFS with this initrd_high setting. + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdtsaveaddr=" __stringify(CONFIG_SYS_FDT_SAVE_ADDRESS) "\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_high=0xffffffff\0" + +/* + * Set fdtaddr to prior stage-provided DTB in board_late_init, when + * writeable environment is available. + */ +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_DM_SPI 1 + +#endif /* __BCMSTB_H */ diff --git a/include/fdtdec.h b/include/fdtdec.h index 332105504b..58d5b721aa 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -49,6 +49,10 @@ struct bd_info; #define SPL_BUILD 0 #endif +#if CONFIG_IS_ENABLED(OF_PRIOR_STAGE) +extern phys_addr_t prior_stage_fdt_address; +#endif + /* * Information about a resource. start is the first address of the resource * and end is the last address (inclusive). The length of the resource will diff --git a/lib/fdtdec.c b/lib/fdtdec.c index fc92082b0b..1b0c430945 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1324,8 +1324,12 @@ int fdtdec_setup(void) # endif # ifndef CONFIG_SPL_BUILD /* Allow the early environment to override the fdt address */ +# if CONFIG_IS_ENABLED(OF_PRIOR_STAGE) + gd->fdt_blob = (void *)prior_stage_fdt_address; +# else gd->fdt_blob = (void *)env_get_ulong("fdtcontroladdr", 16, (uintptr_t)gd->fdt_blob); +# endif # endif # if CONFIG_IS_ENABLED(MULTI_DTB_FIT) -- 2.25.1