From 888afe7c698d94af6543d8be86d341cf99c998d8 Mon Sep 17 00:00:00 2001 From: Alex Lewontin Date: Fri, 21 Feb 2020 15:58:12 -0500 Subject: [PATCH] ramips: move Netgear R6120 LED trigger to DTS This moves the trigger for the Netgear R6120's wlan2g_green LED from base-files/etc/board.d/01_leds to the device-tree file. This has been applied to R6120 based on findings for the very similar Netgear R6080. Signed-off-by: Alex Lewontin [merge case in 01_leds, slightly adjust commit message/title] Signed-off-by: Adrian Schmutzler --- target/linux/ramips/dts/mt7628an_netgear_r6120.dts | 1 + target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 8 ++------ 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/target/linux/ramips/dts/mt7628an_netgear_r6120.dts b/target/linux/ramips/dts/mt7628an_netgear_r6120.dts index f4fe73a526..191538100c 100644 --- a/target/linux/ramips/dts/mt7628an_netgear_r6120.dts +++ b/target/linux/ramips/dts/mt7628an_netgear_r6120.dts @@ -43,6 +43,7 @@ wlan2g_green { label = "r6120:green:wlan2g"; gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; wlan2g_orange { diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 685895452a..0837f9d003 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -22,7 +22,8 @@ alfa-network,awusfree1) ;; asus,rt-n10p-v3|\ asus,rt-n11p-b1|\ -asus,rt-n12-vp-b1) +asus,rt-n12-vp-b1|\ +netgear,r6120) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0xf" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" ;; @@ -46,11 +47,6 @@ hiwifi,hc5761a) mediatek,linkit-smart-7688) ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt" ;; -netgear,r6120) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" - ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt" - ;; rakwireless,rak633) set_wifi_led "$boardname:blue:wifi" ;; -- 2.25.1