From 880c59e5add3681bd4dca14d2fd20152bee7ad14 Mon Sep 17 00:00:00 2001 From: Graeme Russ Date: Sat, 24 Apr 2010 00:05:58 +1000 Subject: [PATCH] eNET: Implement eNET Watchdog Signed-off-by: Graeme Russ --- board/eNET/eNET.c | 45 ++++++++++++++++++++++++++++++++++++++++++ board/eNET/hardware.h | 1 + include/configs/eNET.h | 10 +--------- 3 files changed, 47 insertions(+), 9 deletions(-) diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c index ad71f7e5dc..7f0e2577f1 100644 --- a/board/eNET/eNET.c +++ b/board/eNET/eNET.c @@ -45,6 +45,9 @@ DECLARE_GLOBAL_DATA_PTR; unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN; +static void enet_timer_isr(void); +static void enet_toggle_run_led(void); + void init_sc520_enet (void) { /* Set CPU Speed to 100MHz */ @@ -160,6 +163,10 @@ int last_stage_init(void) major = minor = 0; + outb(0x00, LED_LATCH_ADDRESS); + + register_timer_isr (enet_timer_isr); + printf("Serck Controls eNET\n"); return 0; @@ -218,3 +225,41 @@ void setup_pcat_compatibility() writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap); writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap); } + +void enet_timer_isr(void) +{ + static long enet_ticks = 0; + + enet_ticks++; + + /* Toggle Watchdog every 100ms */ + if ((enet_ticks % 100) == 0) + hw_watchdog_reset(); + + /* Toggle Run LED every 500ms */ + if ((enet_ticks % 500) == 0) + enet_toggle_run_led(); +} + +void hw_watchdog_reset(void) +{ + /* Watchdog Reset must be atomic */ + long flag = disable_interrupts(); + + if (sc520_mmcr->piodata15_0 & WATCHDOG_PIO_BIT) + sc520_mmcr->pioclr15_0 = WATCHDOG_PIO_BIT; + else + sc520_mmcr->pioset15_0 = WATCHDOG_PIO_BIT; + + if (flag) + enable_interrupts(); +} + +void enet_toggle_run_led(void) +{ + unsigned char leds_state= inb(LED_LATCH_ADDRESS); + if (leds_state & LED_RUN_BITMASK) + outb(leds_state &~ LED_RUN_BITMASK, LED_LATCH_ADDRESS); + else + outb(leds_state | LED_RUN_BITMASK, LED_LATCH_ADDRESS); +} diff --git a/board/eNET/hardware.h b/board/eNET/hardware.h index 42474a62fa..dec2cd8040 100644 --- a/board/eNET/hardware.h +++ b/board/eNET/hardware.h @@ -31,5 +31,6 @@ #define LED_RX_BITMASK 0x08 #define LED_TX_BITMASK 0x10 #define LED_ERR_BITMASK 0x20 +#define WATCHDOG_PIO_BIT 0x8000 #endif /* HARDWARE_H_ */ diff --git a/include/configs/eNET.h b/include/configs/eNET.h index 61897949dd..361fe61b04 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -53,7 +53,7 @@ * bottom (processor) board MUST be removed! */ #undef CONFIG_WATCHDOG -#undef CONFIG_HW_WATCHDOG +#define CONFIG_HW_WATCHDOG /*----------------------------------------------------------------------- * Serial Configuration @@ -233,14 +233,6 @@ #define CONFIG_NET_MULTI #define CONFIG_RTL8139 -/*----------------------------------------------------------------------- - * Hardware watchdog configuration - */ -#define CONFIG_SYS_WATCHDOG_PIO_BIT 0x8000 -#define CONFIG_SYS_WATCHDIG_PIO_DATA SC520_PIODATA15_0 -#define CONFIG_SYS_WATCHDIG_PIO_CLR SC520_PIOCLR15_0 -#define CONFIG_SYS_WATCHDIG_PIO_SET SC520_PIOSET15_0 - /*----------------------------------------------------------------------- * FPGA configuration */ -- 2.25.1