From 853ce2ee9c53b97694804e60450c15d40df9b502 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 8 Jan 2014 20:11:02 +0900 Subject: [PATCH] board: delete unused header files Signed-off-by: Masahiro Yamada Acked-by: Stefan Roese Acked-by: Matthias Fuchs --- board/cogent/kbm.h | 79 ------------ board/cray/L1/L1.h | 28 ----- board/esd/common/s1d13806_640_480_8bpp.h | 120 ------------------ board/etin/debris/speed.h | 38 ------ board/genietv/genietv.h | 25 ---- board/hidden_dragon/speed.h | 38 ------ board/inka4x0/hyb25d512160bf-5.h | 16 --- board/prodrive/p3mx/ppc_error_no.h | 148 ----------------------- board/sandpoint/speed.h | 38 ------ 9 files changed, 530 deletions(-) delete mode 100644 board/cogent/kbm.h delete mode 100644 board/cray/L1/L1.h delete mode 100644 board/esd/common/s1d13806_640_480_8bpp.h delete mode 100644 board/etin/debris/speed.h delete mode 100644 board/genietv/genietv.h delete mode 100644 board/hidden_dragon/speed.h delete mode 100644 board/inka4x0/hyb25d512160bf-5.h delete mode 100644 board/prodrive/p3mx/ppc_error_no.h delete mode 100644 board/sandpoint/speed.h diff --git a/board/cogent/kbm.h b/board/cogent/kbm.h deleted file mode 100644 index 7eb419c1d6..0000000000 --- a/board/cogent/kbm.h +++ /dev/null @@ -1,79 +0,0 @@ -/* keyboard/mouse not implemented yet */ - -extern int cma_kbm_not_implemented; - -/**************** DEFINES for H8542B Keyboard/Mouse Controller ***************/ - -/* - * note the auxillary port is used to control the mouse - */ - -/* 8542B Commands (Sent to the Command Port) */ -#define HT8542_CMD_SET_BYTE 0x60 /* Set the command byte */ -#define HT8542_CMD_GET_BYTE 0x20 /* Get the command byte */ -#define HT8542_CMD_KBD_OBUFF 0xD2 /* Write to HT8542 Kbd Output Buffer */ -#define HT8542_CMD_AUX_OBUFF 0xD3 /* Write to HT8542 Mse Output Buffer */ -#define HT8542_CMD_AUX_WRITE 0xD4 /* Write to Mouse Port */ -#define HT8542_CMD_AUX_OFF 0xA7 /* Disable Mouse Port */ -#define HT8542_CMD_AUX_ON 0xA8 /* Re-Enable Mouse Port */ -#define HT8542_CMD_AUX_TEST 0xA9 /* Test for the presence of a Mouse */ -#define HT8542_CMD_DIAG 0xAA /* Start Diagnostics */ -#define HT8542_CMD_KBD_TEST 0xAB /* Test for presence of a keyboard */ -#define HT8542_CMD_KBD_OFF 0xAD /* Disable Kbd Port (use KBD_DAT_ON) */ -#define HT8542_CMD_KBD_ON 0xAE /* Enable Kbd Port (use KBD_DAT_OFF) */ - -/* HT8542B cmd byte set by KBD_CMD_SET_BYTE and retrieved by KBD_CMD_GET_BYTE */ -#define HT8542_CMD_BYTE_TRANS 0x40 -#define HT8542_CMD_BYTE_AUX_OFF 0x20 /* 1 = mse port disabled, 0 = enabled */ -#define HT8542_CMD_BYTE_KBD_OFF 0x10 /* 1 = kbd port disabled, 0 = enabled */ -#define HT8542_CMD_BYTE_OVER 0x08 /* 1 = override keyboard lock */ -#define HT8542_CMD_BYTE_RES 0x04 /* reserved */ -#define HT8542_CMD_BYTE_AUX_INT 0x02 /* 1 = enable mouse interrupt */ -#define HT8542_CMD_BYTE_KBD_INT 0x01 /* 1 = enable keyboard interrupt */ - -/* Keyboard Commands (Sent to the Data Port) */ -#define KBD_CMD_LED 0xED /* Set Keyboard LEDS with next byte */ -#define KBD_CMD_ECHO 0xEE /* Echo - we get 0xFA, 0xEE back */ -#define KBD_CMD_MODE 0xF0 /* set scan code mode with next byte */ -#define KBD_CMD_ID 0xF2 /* get keyboard/mouse ID */ -#define KBD_CMD_RPT 0xF3 /* Set Repeat Rate and Delay 2nd Byte */ -#define KBD_CMD_ON 0xF4 /* Enable keyboard */ -#define KBD_CMD_OFF 0xF5 /* Disables Scanning, Resets to Def */ -#define KBD_CMD_DEF 0xF6 /* Reverts kbd to default settings */ -#define KBD_CMD_RST 0xFF /* Reset - should get 0xFA, 0xAA back */ - -/* Set LED second bit defines */ -#define KBD_CMD_LED_SCROLL 0x01 /* Set SCROLL LOCK LED on */ -#define KBD_CMD_LED_NUM 0x02 /* Set NUM LOCK LED on */ -#define KBD_CMD_LED_CAPS 0x04 /* Set CAPS LOCK LED on */ - -/* Set Mode second byte defines */ -#define KBD_CMD_MODE_STAT 0x00 /* get current scan code mode */ -#define KBD_CMD_MODE_SCAN1 0x01 /* set mode to scan code 1 */ -#define KBD_CMD_MODE_SCAN2 0x02 /* set mode to scan code 2 */ -#define KBD_CMD_MODE_SCAN3 0x03 /* set mode to scan code 3 */ - -/* Keyboard/Mouse ID Codes */ -#define KBD_CMD_ID_1ST 0xAB /* 1st byte is 0xAB, 2nd is actual ID */ -#define KBD_CMD_ID_KBD 0x83 /* Keyboard */ -#define KBD_CMD_ID_MOUSE 0x00 /* Mouse */ - -/* Keyboard Data Return Defines */ -#define KBD_STAT_OVER 0x00 /* Buffer Overrun */ -#define KBD_STAT_DIAG_OK 0x55 /* Internal Self Test OK */ -#define KBD_STAT_RST_OK 0xAA /* Reset Complete */ -#define KBD_STAT_ECHO 0xEE /* Echo Command Return */ -#define KBD_STAT_BRK 0xF0 /* Prefix for Break Key Code */ -#define KBD_STAT_ACK 0xFA /* Received after all commands */ -#define KBD_STAT_DIAG_FAIL 0xFD /* Internal Self Test Failed */ -#define KBD_STAT_RESEND 0xFE /* Resend Last Command */ - -/* HT8542B Status Register Bit Defines */ -#define HT8542_STAT_OBF 0x01 /* 1 = output buffer is full */ -#define HT8542_STAT_IBF 0x02 /* 1 = input buffer is full */ -#define HT8542_STAT_SYS 0x04 /* system flag - unused */ -#define HT8542_STAT_CMD 0x08 /* 1 = cmd in input buffer, 0 = data */ -#define HT8542_STAT_INH 0x10 /* 1 = Inhibit - unused */ -#define HT8542_STAT_TX 0x20 /* 1 = Transmit Timeout has occured */ -#define HT8542_STAT_RX 0x40 /* 1 = Receive Timeout has occured */ -#define HT8542_STAT_PERR 0x80 /* 1 = Parity Error from Keyboard */ diff --git a/board/cray/L1/L1.h b/board/cray/L1/L1.h deleted file mode 100644 index 42c34dd910..0000000000 --- a/board/cray/L1/L1.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/**************************************************************************** - * FLASH Memory Map as used by CRAY L1, 4MB AMD29F032B flash chip - * - * Start Address Length - * +++++++++++++++++++++++++ 0xFFC0_0000 Start of Flash ----------------- - * | Failsafe Linux Image | (1M) - * +=======================+ 0xFFD0_0000 - * | (Reserved FlashFiles) | (1M) - * +=======================+ 0xFFE0_0000 - * | Failsafe RootFS | (1M) - * +=======================+ 0xFFF0_0000 - * | | - * | U N U S E D | - * | | - * +-----------------------+ 0xFFFD_0000 U-Boot image header (64 bytes) - * | environment settings | (64k) - * +-----------------------+ 0xFFFE_0000 U-Boot image header (64 bytes) - * | U-Boot | 0xFFFE_0040 _start of U-Boot - * | | 0xFFFE_FFFC reset vector - branch to _start - * +++++++++++++++++++++++++ 0xFFFF_FFFF End of Flash ----------------- - *****************************************************************************/ diff --git a/board/esd/common/s1d13806_640_480_8bpp.h b/board/esd/common/s1d13806_640_480_8bpp.h deleted file mode 100644 index ddc0289b2e..0000000000 --- a/board/esd/common/s1d13806_640_480_8bpp.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright (c) 2000,2001 Epson Research and Development, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * File generated by S1D13806CFG.EXE - * Panel: (active) 640x480 59Hz TFT Single 18-bit (PCLK=CLKI2=25.000MHz) - * Memory: Embedded SDRAM (MCLK=CLKI=49.152MHz) (BUSCLK=33.333MHz) - */ - -static S1D_REGS regs_13806_640_320_16bpp[] = -{ - {0x0001,0x00}, /* Miscellaneous Register */ - {0x01FC,0x00}, /* Display Mode Register */ - {0x0004,0x18}, /* General IO Pins Configuration Register 0 */ - {0x0005,0x00}, /* General IO Pins Configuration Register 1 */ - {0x0008,0x18}, /* General IO Pins Control Register 0 */ - {0x0009,0x00}, /* General IO Pins Control Register 1 */ - {0x0010,0x00}, /* Memory Clock Configuration Register */ - {0x0014,0x02}, /* LCD Pixel Clock Configuration Register */ - {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */ - {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ - {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ - {0x0021,0x03}, /* DRAM Refresh Rate Register */ - {0x002A,0x00}, /* DRAM Timings Control Register 0 */ - {0x002B,0x01}, /* DRAM Timings Control Register 1 */ - {0x0020,0x80}, /* Memory Configuration Register */ - {0x0030,0x25}, /* Panel Type Register */ - {0x0031,0x00}, /* MOD Rate Register */ - {0x0032,0x4F}, /* LCD Horizontal Display Width Register */ - {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */ - {0x0035,0x00}, /* TFT FPLINE Start Position Register */ - {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ - {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */ - {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */ - {0x003A,0x24}, /* LCD Vertical Non-Display Period Register */ - {0x003B,0x00}, /* TFT FPFRAME Start Position Register */ - {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ - {0x0040,0x03}, /* LCD Display Mode Register (8bpp) */ - {0x0041,0x00}, /* LCD Miscellaneous Register */ - {0x0042,0x00}, /* LCD Display Start Address Register 0 */ - {0x0043,0x00}, /* LCD Display Start Address Register 1 */ - {0x0044,0x00}, /* LCD Display Start Address Register 2 */ - {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */ - {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */ - {0x0048,0x00}, /* LCD Pixel Panning Register */ - {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ - {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ - {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ - {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ - {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ - {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ - {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ - {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ - {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ - {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ - {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ - {0x005B,0x10}, /* TV Output Control Register */ - {0x0060,0x05}, /* CRT/TV Display Mode Register */ - {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ - {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ - {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ - {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */ - {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */ - {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ - {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ - {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ - {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ - {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */ - {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ - {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ - {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ - {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ - {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ - {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ - {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ - {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ - {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ - {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ - {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ - {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ - {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */ - {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ - {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ - {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ - {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ - {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ - {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ - {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ - {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ - {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ - {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ - {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ - {0x0100,0x00}, /* BitBlt Control Register 0 */ - {0x0101,0x00}, /* BitBlt Control Register 1 */ - {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ - {0x0103,0x00}, /* BitBlt Operation Register */ - {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ - {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ - {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ - {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ - {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ - {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ - {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ - {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ - {0x0110,0x00}, /* BitBlt Width Register 0 */ - {0x0111,0x00}, /* BitBlt Width Register 1 */ - {0x0112,0x00}, /* BitBlt Height Register 0 */ - {0x0113,0x00}, /* BitBlt Height Register 1 */ - {0x0114,0x00}, /* BitBlt Background Color Register 0 */ - {0x0115,0x00}, /* BitBlt Background Color Register 1 */ - {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ - {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ - {0x01E0,0x00}, /* Look-Up Table Mode Register */ - {0x01E2,0x00}, /* Look-Up Table Address Register */ - {0x01F0,0x10}, /* Power Save Configuration Register */ - {0x01F1,0x00}, /* Power Save Status Register */ - {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ - {0x01FC,0x01}, /* Display Mode Register */ -}; diff --git a/board/etin/debris/speed.h b/board/etin/debris/speed.h deleted file mode 100644 index f1b10bf25e..0000000000 --- a/board/etin/debris/speed.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/*----------------------------------------------------------------------- - * Timer value for timer 2, ICLK = 10 - * - * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1)) - * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1 - * - * SPEED_FCOUNT2 timer 2 counting frequency - * GCLK CPU clock - * SPEED_TMR2_PS prescaler - */ -#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */ - -/*----------------------------------------------------------------------- - * Timer value for PIT - * - * PIT_TIME = SPEED_PITC / PITRTCLK - * PITRTCLK = 8192 - */ -#define SPEED_PITC (82 << 16) /* start counting from 82 */ - -/* - * The new value for PTA is calculated from - * - * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS) - * - * gclk CPU clock (not bus clock !) - * Trefresh Refresh cycle * 4 (four word bursts used) - * DFBRG For normal mode (no clock reduction) always 0 - * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh) - * NCS Number of SDRAM banks (chip selects) on this UPM. - */ diff --git a/board/genietv/genietv.h b/board/genietv/genietv.h deleted file mode 100644 index 7c95b566f9..0000000000 --- a/board/genietv/genietv.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * The GENIETV is using the following physical memorymap (copied from - * the FADS configuration): - * - * ff020000 -> ff02ffff : pcmcia - * ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxROM - * ff000000 -> ff00ffff : IMAP internal in the cpu - * 02800000 -> 0287ffff : flash connected to CS0 - * 00000000 -> nnnnnnnn : sdram setup by U-Boot - * - * CS pins are connected as follows: - * - * CS0 -512Kb boot flash - * CS1 - SDRAM #1 - * CS2 - SDRAM #2 - * CS3 - Flash #1 - * CS4 - Flash #2 - * CS5 - LON (if present) - * CS6 - PCMCIA #1 - * CS7 - PCMCIA #2 - * - * Ports are configured as follows: - * - * PA7 - SDRAM banks enable - */ diff --git a/board/hidden_dragon/speed.h b/board/hidden_dragon/speed.h deleted file mode 100644 index f1b10bf25e..0000000000 --- a/board/hidden_dragon/speed.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/*----------------------------------------------------------------------- - * Timer value for timer 2, ICLK = 10 - * - * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1)) - * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1 - * - * SPEED_FCOUNT2 timer 2 counting frequency - * GCLK CPU clock - * SPEED_TMR2_PS prescaler - */ -#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */ - -/*----------------------------------------------------------------------- - * Timer value for PIT - * - * PIT_TIME = SPEED_PITC / PITRTCLK - * PITRTCLK = 8192 - */ -#define SPEED_PITC (82 << 16) /* start counting from 82 */ - -/* - * The new value for PTA is calculated from - * - * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS) - * - * gclk CPU clock (not bus clock !) - * Trefresh Refresh cycle * 4 (four word bursts used) - * DFBRG For normal mode (no clock reduction) always 0 - * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh) - * NCS Number of SDRAM banks (chip selects) on this UPM. - */ diff --git a/board/inka4x0/hyb25d512160bf-5.h b/board/inka4x0/hyb25d512160bf-5.h deleted file mode 100644 index f16f450d01..0000000000 --- a/board/inka4x0/hyb25d512160bf-5.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Semihalf - * Written by Marian Balakowicz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73711930 -#define SDRAM_CONFIG2 0x46770000 -#define SDRAM_TAPDELAY 0x10000000 diff --git a/board/prodrive/p3mx/ppc_error_no.h b/board/prodrive/p3mx/ppc_error_no.h deleted file mode 100644 index 58a68b5d89..0000000000 --- a/board/prodrive/p3mx/ppc_error_no.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * (C) Copyright 2003 - * Ingo Assmus - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus - */ -#ifndef _MV_PPC_ERRNO_H -#define _MV_PPC_ERRNO_H - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ -#define EDEADLOCK 58 /* File locking deadlock error */ -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ - -/* Should never be seen by user programs */ -#define ERESTARTSYS 512 -#define ERESTARTNOINTR 513 -#define ERESTARTNOHAND 514 /* restart if no handler.. */ -#define ENOIOCTLCMD 515 /* No ioctl command */ - -#define _LAST_ERRNO 515 - -#endif diff --git a/board/sandpoint/speed.h b/board/sandpoint/speed.h deleted file mode 100644 index f1b10bf25e..0000000000 --- a/board/sandpoint/speed.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/*----------------------------------------------------------------------- - * Timer value for timer 2, ICLK = 10 - * - * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1)) - * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1 - * - * SPEED_FCOUNT2 timer 2 counting frequency - * GCLK CPU clock - * SPEED_TMR2_PS prescaler - */ -#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */ - -/*----------------------------------------------------------------------- - * Timer value for PIT - * - * PIT_TIME = SPEED_PITC / PITRTCLK - * PITRTCLK = 8192 - */ -#define SPEED_PITC (82 << 16) /* start counting from 82 */ - -/* - * The new value for PTA is calculated from - * - * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS) - * - * gclk CPU clock (not bus clock !) - * Trefresh Refresh cycle * 4 (four word bursts used) - * DFBRG For normal mode (no clock reduction) always 0 - * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh) - * NCS Number of SDRAM banks (chip selects) on this UPM. - */ -- 2.25.1