From 83a9f0a3d703a37044d2438a3c4223561de503b3 Mon Sep 17 00:00:00 2001 From: Sandeep Sheriker Mallikarjun Date: Fri, 27 Sep 2019 13:08:56 +0000 Subject: [PATCH] configs: Add sam9x60ek_mmc_defconfig add sam9x60ek_mmc_defconfig and for now only supports booting from sdcard. Signed-off-by: Sandeep Sheriker Mallikarjun Signed-off-by: Nicolas Ferre [nicolas.ferre@microchip.com: split patch, add Ethernet controller, phy and tools] [claudiu.beznea@microchip.com: add CONFIG_OF_LIBFDT_OVERLAY] Signed-off-by: Claudiu Beznea [tudor.ambarus@microchip.com: Fix number of DRAM banks: One DDR2-SDRAM (W972GG6KB 2 Gbit = 16 Mbit x 16 x 8 banks] Signed-off-by: Tudor Ambarus --- configs/sam9x60ek_mmc_defconfig | 52 +++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 configs/sam9x60ek_mmc_defconfig diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig new file mode 100644 index 0000000000..6cdc819a67 --- /dev/null +++ b/configs/sam9x60ek_mmc_defconfig @@ -0,0 +1,52 @@ +CONFIG_ARM=y +CONFIG_ARCH_AT91=y +CONFIG_SYS_TEXT_BASE=0x23f00000 +CONFIG_TARGET_SAM9X60EK=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ENV_SIZE=0x4000 +CONFIG_NR_DRAM_BANKS=8 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_BASE=0xfffff200 +CONFIG_DEBUG_UART_CLOCK=200000000 +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_SD_BOOT=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +CONFIG_DM=y +CONFIG_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_GENERIC_CLK=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ATMEL=y +CONFIG_PHY_MICREL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_TIMER=y +CONFIG_ATMEL_PIT_TIMER=y +CONFIG_OF_LIBFDT_OVERLAY=y -- 2.25.1