From 82fadccccfd80c6162639180af85c600b6e41d9e Mon Sep 17 00:00:00 2001 From: Pankaj Bansal Date: Fri, 8 Feb 2019 08:59:24 +0000 Subject: [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled some dpmacs in armv8a based freescale layerscape SOCs can be configured via both serdes(sgmii, xfi, xlaui etc) bits and via EC*_PMUX(rgmii) bits in RCW. e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits Now if a dpmac is enabled by serdes bits then it takes precedence over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII, then the dpmac is SGMII and not RGMII. Therefore, in fsl_rgmii_init function of SOC, we will check if the dpmac is enabled or not? if it is (fsl_serdes_init has already enabled the dpmac), then don't enable it. Signed-off-by: Pankaj Bansal Acked-by: Joe Hershberger Reviewed-by: Prabhakar Kushwaha --- drivers/net/ldpaa_eth/lx2160a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ldpaa_eth/lx2160a.c b/drivers/net/ldpaa_eth/lx2160a.c index 7dd46c04f6..1fbeb0d14b 100644 --- a/drivers/net/ldpaa_eth/lx2160a.c +++ b/drivers/net/ldpaa_eth/lx2160a.c @@ -91,7 +91,7 @@ void fsl_rgmii_init(void) & FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK; ec >>= FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT; - if (!ec) + if (!ec && (wriop_is_enabled_dpmac(17) == -ENODEV)) wriop_init_dpmac_enet_if(17, PHY_INTERFACE_MODE_RGMII_ID); #endif @@ -100,7 +100,7 @@ void fsl_rgmii_init(void) & FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK; ec >>= FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT; - if (!ec) + if (!ec && (wriop_is_enabled_dpmac(18) == -ENODEV)) wriop_init_dpmac_enet_if(18, PHY_INTERFACE_MODE_RGMII_ID); #endif } -- 2.25.1