From 8148b824492e7696a9e72bb5b715720db8fd889e Mon Sep 17 00:00:00 2001 From: Ulises Cardenas Date: Mon, 20 Apr 2015 13:47:58 -0500 Subject: [PATCH] Fix mxc_hab documenation It is necessary to modify the configuration file for the target board. It wasn't well documented that to enable any of the secure boot modes, it is required to add CONFIG_SECURE_BOOT to the board configuration file. Also, fixed a typo in the encrypted boot section. Signed-off-by: Ulises Cardenas --- doc/README.mxc_hab | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab index a1b1d348ed..b688580f75 100644 --- a/doc/README.mxc_hab +++ b/doc/README.mxc_hab @@ -1,7 +1,13 @@ High Assurance Boot (HAB) for i.MX6 CPUs -To authenticate U-Boot only by the CPU there is no code required in -U-Boot itself. However, the U-Boot image to be programmed into the +To enable the authenticated or encrypted boot mode of U-Boot, it is +required to set the proper configuration for the target board. This +is done by adding the following configuration in in the proper config +file (e.g. include/configs/mx6qarm2.h) + +#define CONFIG_SECURE_BOOT + +In addition, the U-Boot image to be programmed into the boot media needs to be properly constructed, i.e. it must contain a proper Command Sequence File (CSF). @@ -69,7 +75,7 @@ CONFIG_SECURE_BOOT CONFIG_SYS_FSL_SEC_COMPAT 4 /* HAB version */ CONFIG_FSL_CAAM CONFIG_CMD_DEKBLOB -CONFIG_SYS_FSL_LE +CONFIG_SYS_FSL_SEC_LE Note: The encrypted boot feature is only supported by HABv4 or greater. -- 2.25.1