From 7f9fd5033cbebc20e18b3b30ff6e821d3cc1c9d7 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Mon, 1 Jun 2009 18:15:30 +0000 Subject: [PATCH] now that the gemini target is working, get rid of the obsolete and buggy storm target SVN-Revision: 16274 --- package/madwifi/Makefile | 3 - target/linux/storm/Makefile | 23 - target/linux/storm/config-default | 221 - target/linux/storm/image/Makefile | 46 - target/linux/storm/patches/001-arch.patch | 8864 -------- target/linux/storm/patches/002-gmac.patch | 18615 ---------------- .../storm/patches/003-gmac_one_phy.patch | 11 - .../storm/patches/004-gmac_enable_napi.patch | 81 - .../patches/005-gmac_napi_mask_intrs.patch | 248 - .../storm/patches/006-gmac_napi_tx.patch | 2094 -- target/linux/storm/patches/007-mtd.patch | 4948 ---- target/linux/storm/patches/008-serial.patch | 2809 --- target/linux/storm/patches/009-watchdog.patch | 398 - target/linux/storm/patches/1100-gpio.patch | 384 - toolchain/gcc/Config.in | 2 +- 15 files changed, 1 insertion(+), 38746 deletions(-) delete mode 100644 target/linux/storm/Makefile delete mode 100644 target/linux/storm/config-default delete mode 100644 target/linux/storm/image/Makefile delete mode 100644 target/linux/storm/patches/001-arch.patch delete mode 100644 target/linux/storm/patches/002-gmac.patch delete mode 100644 target/linux/storm/patches/003-gmac_one_phy.patch delete mode 100644 target/linux/storm/patches/004-gmac_enable_napi.patch delete mode 100644 target/linux/storm/patches/005-gmac_napi_mask_intrs.patch delete mode 100644 target/linux/storm/patches/006-gmac_napi_tx.patch delete mode 100644 target/linux/storm/patches/007-mtd.patch delete mode 100644 target/linux/storm/patches/008-serial.patch delete mode 100644 target/linux/storm/patches/009-watchdog.patch delete mode 100644 target/linux/storm/patches/1100-gpio.patch diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile index 93e610dfd0..b246028224 100644 --- a/package/madwifi/Makefile +++ b/package/madwifi/Makefile @@ -97,9 +97,6 @@ endif ifeq ($(ARCH),powerpc) HAL_TARGET:=powerpc-be-elf endif -ifeq ($(BOARD),storm) - HAL_TARGET:=armv4-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi) -endif ifeq ($(BOARD),gemini) HAL_TARGET:=armv4-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi) endif diff --git a/target/linux/storm/Makefile b/target/linux/storm/Makefile deleted file mode 100644 index 9c5f4adcf3..0000000000 --- a/target/linux/storm/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# -# Copyright (C) 2006-2008 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=arm -BOARD:=storm -BOARDNAME:=Storm SL3512 -FEATURES:=squashfs pci broken -CFLAGS:=-Os -pipe -march=armv4 -mtune=arm9tdmi -funit-at-a-time - -LINUX_VERSION:=2.6.23.17 - -include $(INCLUDE_DIR)/target.mk - -define Target/Description - Build images for boards based on the Storm Semiconductor SL3512, eg. Wiligear WBD-111 -endef - -$(eval $(call BuildTarget)) diff --git a/target/linux/storm/config-default b/target/linux/storm/config-default deleted file mode 100644 index 36f2519346..0000000000 --- a/target/linux/storm/config-default +++ /dev/null @@ -1,221 +0,0 @@ -# CONFIG_AEABI is not set -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SL2312=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARM=y -# CONFIG_ARPD is not set -# CONFIG_ARTHUR is not set -# CONFIG_ATM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_BINFMT_AOUT is not set -CONFIG_BITREVERSE=y -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_BONDING is not set -CONFIG_BOUNCE=y -# CONFIG_BRIDGE_NF_EBTABLES is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_CIFS is not set -# CONFIG_CLS_U32_PERF is not set -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,19200 mem=32M" -CONFIG_CPU_32=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4=y -CONFIG_CPU_CACHE_FA=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_FA=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -CONFIG_CPU_FA526=y -CONFIG_CPU_FA_BTB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_TLB_FA=y -# CONFIG_CRC_ITU_T is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_ERRORS is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_LL is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_DEFAULT_NOOP=y -# CONFIG_DETECT_SOFTLOCKUP is not set -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_ELF_CORE=y -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_EPOLL is not set -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_FAULT_INJECTION is not set -CONFIG_FORCED_INLINING=y -# CONFIG_FPE_FASTFPE is not set -# CONFIG_FPE_NWFPE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FUTEX is not set -# CONFIG_FW_LOADER is not set -CONFIG_GEMINI_GPIO_DEV=y -# CONFIG_GEMINI_IPI is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set -# CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_HAMRADIO is not set -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HFSPLUS_FS is not set -# CONFIG_HFS_FS is not set -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -# CONFIG_IEEE80211 is not set -# CONFIG_IFB is not set -# CONFIG_IKCONFIG is not set -# CONFIG_IMQ is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_DIAG is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IPSEC_NAT_TRAVERSAL is not set -# CONFIG_IPV6 is not set -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_ISDN is not set -# CONFIG_ISO9660_FS is not set -# CONFIG_JFFS2_RTIME is not set -# CONFIG_JFFS2_SUMMARY is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_LLC2 is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_MSDOS_FS is not set -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -CONFIG_MTD_REDBOOT_PARTS=y -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_SERIAL is not set -CONFIG_MTD_SL2312_CFI=y -# CONFIG_MTD_SL2312_SERIAL_ATMEL is not set -# CONFIG_MTD_SL2312_SERIAL_ST is not set -CONFIG_NETDEV_1000=y -# CONFIG_NET_ACT_GACT is not set -# CONFIG_NET_ACT_IPT is not set -# CONFIG_NET_ACT_MIRRED is not set -# CONFIG_NET_ACT_PEDIT is not set -# CONFIG_NET_CLS_RSVP is not set -# CONFIG_NET_CLS_RSVP6 is not set -# CONFIG_NET_EMATCH is not set -CONFIG_NET_GMAC=y -# CONFIG_NET_IPGRE is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_KEY is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_SCH_DSMARK is not set -# CONFIG_NET_SCH_ESFQ is not set -# CONFIG_NET_SCH_GRED is not set -# CONFIG_NET_SCH_HFSC is not set -# CONFIG_NET_SCH_HTB is not set -# CONFIG_NET_SCH_INGRESS is not set -# CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_RED is not set -# CONFIG_NET_SCH_RR is not set -# CONFIG_NET_SCH_SFQ is not set -# CONFIG_NET_SCH_TBF is not set -# CONFIG_NET_SCH_TEQL is not set -# CONFIG_NET_SL2312 is not set -CONFIG_NET_SL351X=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_NFSD is not set -# CONFIG_NFS_FS is not set -CONFIG_NF_CONNTRACK=y -# CONFIG_NLS is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_NVRAM is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_PACKET=m -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_PCI=y -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_SYSCALL=y -# CONFIG_PPP_MPPE is not set -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_SL2312=y -CONFIG_SERIAL_SL2312_CONSOLE=y -# CONFIG_SL2312_LPC is not set -# CONFIG_SL2312_MPAGE is not set -# CONFIG_SL2312_RECVFILE is not set -# CONFIG_SL2312_SHARE_PIN is not set -# CONFIG_SL2312_TSO is not set -# CONFIG_SL2312_USB is not set -CONFIG_SL3516_ASIC=y -# CONFIG_SMC91X is not set -# CONFIG_SOUND is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_STANDALONE is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_SYSVIPC is not set -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_TICK_ONESHOT is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_UDF_FS is not set -CONFIG_UID16=y -# CONFIG_USB_SUPPORT is not set -# CONFIG_USER_NS is not set -CONFIG_VECTORS_BASE=0xffff0000 -# CONFIG_VFAT_FS is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_DEV is not set -CONFIG_VLAN_8021Q=m -# CONFIG_W1 is not set -CONFIG_WATCHDOG_SL351X=y -# CONFIG_WLAN_80211 is not set -# CONFIG_XFRM_USER is not set -# CONFIG_XFS_FS is not set -# CONFIG_XIP_KERNEL is not set -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/target/linux/storm/image/Makefile b/target/linux/storm/image/Makefile deleted file mode 100644 index e94c463ec5..0000000000 --- a/target/linux/storm/image/Makefile +++ /dev/null @@ -1,46 +0,0 @@ -# -# Copyright (C) 2007-2008 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Image/Prepare - cp $(LINUX_DIR)/arch/arm/boot/zImage $(KDIR)/zImage -endef - -define Image/BuildKernel - cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage -# -# XXX - FIXME -# -# BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh -endef - -define Image/Build/jffs2-64k - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=64k conv=sync -endef - -define Image/Build/jffs2-128k - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=128k conv=sync -endef - -define Image/Build/squashfs - $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) -endef - -define Image/Build - $(call Image/Build/$(1),$(1)) - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync - - -$(STAGING_DIR_HOST)/bin/mkfwimage2 \ - -m GEOS -f 0x30000000 -z \ - -v WILI-S.WILIBOARD.v5.00.SL3512.OpenWrt.00000.000000.000000 \ - -o $(BIN_DIR)/openwrt-$(BOARD)-wbd-111-$(1).bin \ - -p Kernel:0x020000:0x100000:0:0:$(BIN_DIR)/openwrt-$(BOARD)-zImage \ - -p Ramdisk:0x120000:0x500000:0:0:$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/storm/patches/001-arch.patch b/target/linux/storm/patches/001-arch.patch deleted file mode 100644 index 699b9ba6d7..0000000000 --- a/target/linux/storm/patches/001-arch.patch +++ /dev/null @@ -1,8864 +0,0 @@ ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -220,6 +220,9 @@ config ARCH_EP93XX - help - This enables support for the Cirrus EP93xx series of CPUs. - -+config ARCH_SL2312 -+ bool "SL2312" -+ - config ARCH_FOOTBRIDGE - bool "FootBridge" - select FOOTBRIDGE -@@ -414,6 +417,8 @@ source "arch/arm/mach-ep93xx/Kconfig" - - source "arch/arm/mach-footbridge/Kconfig" - -+source "arch/arm/mach-sl2312/Kconfig" -+ - source "arch/arm/mach-integrator/Kconfig" - - source "arch/arm/mach-iop32x/Kconfig" -@@ -549,6 +554,16 @@ config PCI - config PCI_SYSCALL - def_bool PCI - -+config SL2312_LPC -+ bool "LPC Host Support" -+ depends on ARCH_SL2312 -+ help -+ -+config SL2312_LPC_IT8712 -+ bool "IT8712 Support" -+ depends on ARCH_SL2312 && SL2312_LPC -+ help -+ - # Select the host bridge type - config PCI_HOST_VIA82C505 - bool -@@ -988,6 +1003,10 @@ if ALIGNMENT_TRAP || !CPU_CP15_MMU - source "drivers/mtd/Kconfig" - endif - -+if ARCH_SL2312 -+source "drivers/telephony/Kconfig" -+endif -+ - source "drivers/parport/Kconfig" - - source "drivers/pnp/Kconfig" -@@ -997,7 +1016,7 @@ source "drivers/block/Kconfig" - if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \ - || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ -- || ARCH_IXP23XX -+ || ARCH_IXP23XX || ARCH_SL2312 - source "drivers/ide/Kconfig" - endif - ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -72,6 +72,7 @@ tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9 - tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi - tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi - tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi -+tune-$(CONFIG_CPU_FA52X) :=-mtune=arm9tdmi - tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 - tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 - tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale -@@ -111,6 +112,7 @@ endif - machine-$(CONFIG_ARCH_PXA) := pxa - machine-$(CONFIG_ARCH_L7200) := l7200 - machine-$(CONFIG_ARCH_INTEGRATOR) := integrator -+ machine-$(CONFIG_ARCH_SL2312) := sl2312 - textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 - machine-$(CONFIG_ARCH_CLPS711X) := clps711x - machine-$(CONFIG_ARCH_IOP32X) := iop32x ---- a/arch/arm/boot/compressed/Makefile -+++ b/arch/arm/boot/compressed/Makefile -@@ -19,6 +19,10 @@ ifeq ($(CONFIG_ARCH_SHARK),y) - OBJS += head-shark.o ofw-shark.o - endif - -+ifeq ($(CONFIG_ARCH_SL2312),y) -+OBJS += head-sl2312.o -+endif -+ - ifeq ($(CONFIG_ARCH_L7200),y) - OBJS += head-l7200.o - endif ---- /dev/null -+++ b/arch/arm/boot/compressed/head-sl2312.S -@@ -0,0 +1,6 @@ -+#include -+#include -+ -+ .section ".start", "ax" -+ mov r7, #MACH_TYPE_SL2312 -+ ---- a/arch/arm/boot/compressed/head.S -+++ b/arch/arm/boot/compressed/head.S -@@ -57,6 +57,17 @@ - mov \rb, #0x50000000 - add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT - .endm -+/***************************************************** -+ * for Storlink SoC -+ *****************************************************/ -+#elif defined(CONFIG_ARCH_SL2312) -+ .macro loadsp, rb -+ mov \rb, #0x16000000 -+ .endm -+ .macro writeb, rb -+ strb \rb, [r3, #0] -+ .endm -+/****************************************************/ - #else - .macro loadsp, rb - addruart \rb -@@ -116,7 +127,28 @@ start: - .rept 8 - mov r0, r0 - .endr -- -+/***************************************************************************** -+ * for Storlink Soc -- on chip UART -+ *****************************************************************************/ -+#ifndef CONFIG_SERIAL_IT8712 // Jason test -+@ mov r3, #0x22000000 -+ mov r3, #0x42000000 -+ mov r11, #0x80 -+ strb r11, [r3, #0xc] -+ mov r11, #0x0 -+ strb r11, [r3, #0x4] -+#ifndef CONFIG_SL3516_ASIC -+ mov r11, #0x9C /*0x9c->19200 0x4E->38400 0x34->57600 */ -+#else -+ mov r11, #0x9C /* 0x61 for 30MHz on GeminiA chip*/ -+#endif -+ strb r11, [r3, #0x0] -+ mov r11, #0x03 -+ strb r11, [r3, #0xc] -+ mov r11, #0xFB -+ strb r11, [r3, #0x18] -+#endif -+/*****************************************************************************/ - b 1f - .word 0x016f2818 @ Magic numbers to help the loader - .word start @ absolute load/run zImage address -@@ -458,6 +490,39 @@ __armv7_mmu_cache_on: - mcr p15, 0, r0, c7, c5, 4 @ ISB - mov pc, r12 - -+/***************************************************************************** -+ * for Storlink Soc -- CPU cache -+ *****************************************************************************/ -+__fa526_cache_on: -+ mov r12, lr -+ bl __setup_mmu -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c6, 0 @ Invalidate D cache -+ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache -+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer -+ mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs -+ mcr p15, 0, r3, c2, c0, 0 @ load page table pointer -+ mov r0, #-1 -+ mcr p15, 0, r0, c3, c0, 0 @ load domain access register -+ mrc p15, 0, r0, c1, c0, 0 -+ mov r0, r0 -+ mov r0, r0 -+#ifndef CONFIG_CPU_DCACHE_DISABLE -+ orr r0, r0, #0x0004 @ .... .... .... .1.. -+#endif -+#ifndef CONFIG_CPU_ICACHE_DISABLE -+ orr r0, r0, #0x1000 @ ...1 .... .... .... -+#endif -+ -+#ifndef DEBUG -+ orr r0, r0, #0x0039 @ Write buffer, mmu -+#endif -+ mcr p15, 0, r0, c1, c0 -+ mov r0, r0 -+ mov r0, r0 -+ mov pc, r12 -+/********************************************************************************/ -+ - __arm6_mmu_cache_on: - mov r12, lr - bl __setup_mmu -@@ -625,6 +690,16 @@ proc_types: - - @ These match on the architecture ID - -+/***************************************************************************** -+ * for Storlink Soc -- CPU architecture ID -+ *****************************************************************************/ -+ .word 0x66015261 @ FA526 -+ .word 0xff01fff1 -+ b __fa526_cache_on -+ b __fa526_cache_off -+ b __fa526_cache_flush -+/*****************************************************************************/ -+ - .word 0x00020000 @ ARMv4T - .word 0x000f0000 - b __armv4_mmu_cache_on -@@ -712,6 +787,23 @@ __armv7_mmu_cache_off: - mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB - mov pc, r12 - -+/***************************************************************************** -+ * for Storlink Soc -- CPU cache -+ *****************************************************************************/ -+__fa526_cache_off: -+ mrc p15, 0, r0, c1, c0 -+ bic r0, r0, #0x000d -+ mov r1, #0 -+ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache -+ mcr p15, 0, r1, c7, c10, 4 @ drain WB -+ mcr p15, 0, r0, c1, c0 @ turn MMU and cache off -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c5, 0 @ invalidate whole cache v4 -+ mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB v4 -+ mov pc, lr -+/*****************************************************************************/ -+ -+ - __arm6_mmu_cache_off: - mov r0, #0x00000030 @ ARM6 control reg. - b __armv3_mmu_cache_off -@@ -759,6 +851,17 @@ __armv4_mpu_cache_flush: - mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr - -+/***************************************************************************** -+ * for Storlink Soc -- CPU cache -+ *****************************************************************************/ -+__fa526_cache_flush: -+ mov r1, #0 -+ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache -+ mcr p15, 0, r1, c7, c5, 0 @ flush I cache -+ mcr p15, 0, r1, c7, c10, 4 @ drain WB -+ mov pc, lr -+/*****************************************************************************/ -+ - - __armv6_mmu_cache_flush: - mov r1, #0 ---- /dev/null -+++ b/arch/arm/boot/compressed/it8712.h -@@ -0,0 +1,25 @@ -+ -+#ifndef __IT8712_H__ -+#define __IT8712_H__ -+ -+#include "asm/arch/sl2312.h" -+ -+#define IT8712_IO_BASE SL2312_LPC_IO_BASE -+//#define IT8712_IO_BASE 0x27000000 -+// Device LDN -+#define LDN_SERIAL1 0x01 -+#define LDN_SERIAL2 0x02 -+#define LDN_PARALLEL 0x03 -+#define LDN_KEYBOARD 0x05 -+#define LDN_MOUSE 0x06 -+#define LDN_GPIO 0x07 -+ -+#define IT8712_UART1_PORT 0x3F8 -+#define IT8712_UART2_PORT 0x2F8 -+ -+#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5 -+ -+void LPCSetConfig(char LdnNumber, char Index, char data); -+char LPCGetConfig(char LdnNumber, char Index); -+ -+#endif ---- a/arch/arm/boot/compressed/misc.c -+++ b/arch/arm/boot/compressed/misc.c -@@ -30,7 +30,7 @@ static void putstr(const char *ptr); - #include - - #ifdef CONFIG_DEBUG_ICEDCC -- -+#include "it8712.h" - #ifdef CONFIG_CPU_V6 - - static void icedcc_putc(int ch) -@@ -69,6 +69,7 @@ static void icedcc_putc(int ch) - #define flush() do { } while (0) - #endif - -+#if 0 - static void putstr(const char *ptr) - { - char c; -@@ -81,11 +82,36 @@ static void putstr(const char *ptr) - - flush(); - } -+#endif - - #endif - - #define __ptr_t void * - -+#ifdef CONFIG_SERIAL_IT8712 -+unsigned int it8712_uart_base; -+#define UART_RX 0 -+#define UART_TX 0 -+#define UART_DLL 0 -+#define UART_TRG 0 -+#define UART_DLM 1 -+#define UART_IER 1 -+#define UART_FCTR 1 -+#define UART_IIR 2 -+#define UART_FCR 2 -+#define UART_EFR 2 -+#define UART_LCR 3 -+#define UART_MCR 4 -+#define UART_LSR 5 -+#define UART_MSR 6 -+#define UART_SCR 7 -+#define UART_EMSR 7 -+void LPCEnterMBPnP(void); -+void LPCExitMBPnP(void); -+int SearchIT8712(void); -+int InitLPCInterface(void); -+#endif -+ - /* - * Optimised C version of memzero for the ARM. - */ -@@ -346,6 +372,9 @@ ulg - decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p, - int arch_id) - { -+#ifdef CONFIG_SERIAL_IT8712 -+ unsigned char *addr; -+#endif - output_data = (uch *)output_start; /* Points to kernel start */ - free_mem_ptr = free_mem_ptr_p; - free_mem_ptr_end = free_mem_ptr_end_p; -@@ -353,6 +382,33 @@ decompress_kernel(ulg output_start, ulg - - arch_decomp_setup(); - -+#ifdef CONFIG_SERIAL_IT8712 -+ -+ InitLPCInterface(); -+ LPCSetConfig(0, 0x02, 0x01); -+ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1); -+ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0); -+ it8712_uart_base = IT8712_IO_BASE; -+ it8712_uart_base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61)); -+ -+ do { -+ addr = (unsigned char *)(it8712_uart_base + UART_LCR) ; -+ *addr = 0x80; -+ // Set Baud Rate -+ addr = (unsigned char *)(it8712_uart_base+UART_DLL); -+ *addr = 0x06 ; -+ addr = (unsigned char *)(it8712_uart_base+UART_DLM); -+ *addr = 0x00 ; -+ -+ addr = (unsigned char *)(it8712_uart_base+UART_LCR); // LCR -+ *addr = 0x07 ; -+ addr = (unsigned char *)(it8712_uart_base+UART_MCR); // MCR -+ *addr = 0x08 ; -+ addr = (unsigned char *)(it8712_uart_base+UART_FCR); // FCR -+ *addr = 0x01 ; -+ } while(0); -+#endif -+ - makecrc(); - putstr("Uncompressing Linux..."); - gunzip(); -@@ -374,4 +430,119 @@ int main() - return 0; - } - #endif -+ -+#ifdef CONFIG_SERIAL_IT8712 -+ -+#define LPC_KEY_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2e) -+#define LPC_DATA_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2f) -+#define LPC_BUS_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 0) -+#define LPC_BUS_STATUS *( unsigned char*) (SL2312_LPC_HOST_BASE + 2) -+#define LPC_SERIAL_IRQ_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 4) -+ -+char LPCGetConfig(char LdnNumber, char Index) -+{ -+ char rtn; -+ unsigned char *addr ; -+ -+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode -+ -+ addr = LPC_KEY_ADDR; -+ *addr = 0x07 ; -+ -+ addr = LPC_DATA_ADDR; -+ *addr = LdnNumber ; -+ -+ addr = LPC_KEY_ADDR; -+ *addr = Index ; -+ -+ addr = LPC_DATA_ADDR ; -+ rtn = *addr ; -+ -+ LPCExitMBPnP(); -+ return rtn; -+ -+} -+ -+void LPCSetConfig(char LdnNumber, char Index, char data) -+{ -+ unsigned char *addr; -+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode -+ addr = LPC_KEY_ADDR; -+ *addr = 0x07; -+ addr = LPC_DATA_ADDR; -+ *addr = LdnNumber; -+ addr = LPC_KEY_ADDR; -+ *addr = Index; -+ addr = LPC_DATA_ADDR; -+ *addr = data; -+ -+ LPCExitMBPnP(); -+} -+ -+//unsigned char key[4] ; -+void LPCEnterMBPnP(void) -+{ -+ unsigned char *addr; -+ addr = LPC_KEY_ADDR; -+ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55}; -+ -+ do { -+ *addr = key[0]; -+ *addr = key[1]; -+ *addr = key[2]; -+ *addr = key[3]; -+ }while(0); -+} -+ -+void LPCExitMBPnP(void) -+{ -+ unsigned char *addr; -+ addr = LPC_KEY_ADDR; -+ *addr = 0x02 ; -+ -+ addr = LPC_DATA_ADDR; -+ *addr = 0x02 ; -+} -+ -+int InitLPCInterface(void) -+{ -+ int i; -+ LPC_BUS_CTRL = 0xc0; -+ LPC_SERIAL_IRQ_CTRL = 0xc0; -+ -+ for(i=0;i<0x2000;i++) ; -+ -+ LPC_SERIAL_IRQ_CTRL = 0x80; -+ if (!SearchIT8712()) ; -+// while(1); -+ return 0; -+} -+ -+int SearchIT8712(void) -+{ -+ unsigned char Id1, Id2; -+ unsigned short Id; -+ unsigned char *addr; -+ -+ LPCEnterMBPnP(); -+ addr = LPC_KEY_ADDR; -+ *addr = 0x20 ; -+ addr = LPC_DATA_ADDR; -+ Id1 = *addr ; -+ -+ addr = LPC_KEY_ADDR; -+ *addr = 0x21 ; -+ addr = LPC_DATA_ADDR; -+ Id2 = *addr ; -+ -+ Id = (Id1 << 8) | Id2; -+ LPCExitMBPnP(); -+ -+ if (Id == 0x8712) -+ return 1; -+ else -+ return 0; -+} -+ -+#endif - ---- a/arch/arm/kernel/entry-armv.S -+++ b/arch/arm/kernel/entry-armv.S -@@ -18,6 +18,8 @@ - #include - #include - #include -+#include -+#include - #include - #include - ---- a/arch/arm/kernel/irq.c -+++ b/arch/arm/kernel/irq.c -@@ -40,6 +40,8 @@ - #include - #include - -+extern int fixup_irq(unsigned int irq); -+ - /* - * No architecture-specific irq_finish function defined in arm/arch/irqs.h. - */ -@@ -111,8 +113,11 @@ static struct irq_desc bad_irq_desc = { - asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) - { - struct pt_regs *old_regs = set_irq_regs(regs); -- struct irq_desc *desc = irq_desc + irq; -+// struct irq_desc *desc = irq_desc + irq; -+ struct irq_desc *desc; - -+ irq = fixup_irq(irq); -+ desc = irq_desc + irq; - /* - * Some hardware gives randomly wrong interrupts. Rather - * than crashing, do something sensible. ---- a/arch/arm/kernel/process.c -+++ b/arch/arm/kernel/process.c -@@ -117,7 +117,7 @@ void arm_machine_restart(char mode) - void (*pm_idle)(void); - EXPORT_SYMBOL(pm_idle); - --void (*pm_power_off)(void); -+//void (*pm_power_off)(void); - EXPORT_SYMBOL(pm_power_off); - - void (*arm_pm_restart)(char str) = arm_machine_restart; -@@ -188,13 +188,37 @@ __setup("reboot=", reboot_setup); - - void machine_halt(void) - { -+ unsigned int reg_v; -+ -+ printk("arch_power_off\n"); -+ -+ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); -+ reg_v &= ~0x00000002; -+ reg_v |= 0x1; -+ mdelay(5); -+ // Power off -+ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); -+ - } - - - void machine_power_off(void) - { -- if (pm_power_off) -+ unsigned int reg_v; -+ -+// if (pm_power_off) -+ if (&pm_power_off!=NULL) - pm_power_off(); -+ -+ printk("arch_power_off\n"); -+ -+ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); -+ reg_v &= ~0x00000002; -+ reg_v |= 0x1; -+ mdelay(5); -+ // Power off -+ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); -+ - } - - void machine_restart(char * __unused) ---- a/arch/arm/kernel/time.c -+++ b/arch/arm/kernel/time.c -@@ -502,8 +502,13 @@ static int __init timer_init_sysfs(void) - - device_initcall(timer_init_sysfs); - -+extern unsigned int rtc_get_time_second(void); -+ - void __init time_init(void) - { -+#ifdef CONFIG_SL2312_RTC -+ xtime.tv_sec = rtc_get_time_second() ; -+#endif - #ifndef CONFIG_GENERIC_TIME - if (system_timer->offset == NULL) - system_timer->offset = dummy_gettimeoffset; ---- /dev/null -+++ b/arch/arm/mach-sl2312/Kconfig -@@ -0,0 +1,33 @@ -+ -+menu "SL2312" -+ -+config SL3516_ASIC -+ bool "SL3516 ASIC version" -+ depends on ARCH_SL2312 -+ help -+ This option to select AISC or FPGA -+config PCI -+ bool "SL2312 PCI" -+ depends on ARCH_SL2312 -+ help -+ This option to enable Storlink PCI controller -+ -+config SL2312_LPC -+ bool "SL2312 LPC" -+ depends on ARCH_SL2312 -+ help -+ This option to enable Low Pin Count controller -+ -+config SL2312_USB -+ bool "SL2312 USB" -+ depends on ARCH_SL2312 -+ help -+ This option to enable USB OTG host controller -+ -+config GEMINI_IPI -+ bool "Gemini IPI test" -+ depends on ARCH_SL2312 -+ help -+ Enable this option to test dual cpu Inter-Processor-Interrupt -+endmenu -+ ---- /dev/null -+++ b/arch/arm/mach-sl2312/Makefile -@@ -0,0 +1,16 @@ -+# -+# Makefile for the linux kernel. -+# -+ -+# Object file lists. -+ -+obj-y := arch.o irq.o mm.o time.o sl3516_device.o -+obj-m := -+obj-n := -+ -+ -+obj-$(CONFIG_PCI) += pci.o -+obj-$(CONFIG_SL2312_LPC) += lpc.o -+obj-$(CONFIG_SL2312_USB) += sl2312-otg.o # sl2312-otg-1.o -+obj-$(CONFIG_GEMINI_XOR_ACCE) += xor.o -+obj-$(CONFIG_GEMINI_IPI) += gemini_ipi.o ---- /dev/null -+++ b/arch/arm/mach-sl2312/Makefile.boot -@@ -0,0 +1,5 @@ -+ zreladdr-y := 0x00008000 -+params_phys-y := 0x00508100 -+#params_phys-y := 0x00008100 -+initrd_phys-y := 0x00800000 -+ ---- /dev/null -+++ b/arch/arm/mach-sl2312/arch.c -@@ -0,0 +1,72 @@ -+/* -+ * linux/arch/arm/mach-epxa10db/arch.c -+ * -+ * Copyright (C) 2000 Deep Blue Solutions Ltd -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+extern void sl2312_map_io(void); -+extern void sl2312_init_irq(void); -+extern unsigned long sl2312_gettimeoffset (void); -+extern void __init sl2312_time_init(void); -+ -+static struct sys_timer sl2312_timer = { -+ .init = sl2312_time_init, -+ .offset = sl2312_gettimeoffset, -+}; -+ -+static void __init -+sl2312_fixup(struct machine_desc *desc, struct tag *tags, -+ char **cmdline, struct meminfo *mi) -+{ -+ mi->nr_banks = 1; -+ mi->bank[0].start = 0; -+#ifdef CONFIG_GEMINI_IPI -+ mi->bank[0].size = (64*1024*1024); // 128M -+#else -+ mi->bank[0].size = (128*1024*1024); // 128M -+#endif -+ mi->bank[0].node = 0; -+} -+ -+/* MACHINE_START(SL2312, "GeminiA") -+ MAINTAINER("Storlink Semi") -+ BOOT_MEM(0x00000000, 0x90000000, 0xf0000000) -+ FIXUP(sl2312_fixup) -+ MAPIO(sl2312_map_io) -+ INITIRQ(sl2312_init_irq) -+ .timer = &sl2312_timer, -+MACHINE_END */ -+ -+MACHINE_START(SL2312, "GeminiA") -+ /* .phys_ram = 0x00000000, */ -+ .phys_io = 0x7fffc000, -+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, -+ .boot_params = 0x100, -+ .fixup = sl2312_fixup, -+ .map_io = sl2312_map_io, -+ .init_irq = sl2312_init_irq, -+ .timer = &sl2312_timer, -+MACHINE_END ---- /dev/null -+++ b/arch/arm/mach-sl2312/gemini_ipi.c -@@ -0,0 +1,593 @@ -+/* -+ * FILE NAME sl_cir.c -+ * -+ * BRIEF MODULE DESCRIPTION -+ * IPI Driver for CPU1. -+ * -+ * Author: StorLink, Corp. -+ * Jason Lee -+ * -+ * Copyright 2002~2006 StorLink, Corp. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMit8712D TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMit8712D TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, writ8712 to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+ -+static int sl_ipi_debug = 1 ; -+#define DEB(x) if(sl_ipi_debug>=1) x -+ -+#define SRAM_PTR IO_ADDRESS(SL2312_SRAM_BASE) -+volatile JSCALE_REQ_T *req=(JSCALE_REQ_T*)SRAM_PTR; -+volatile JSCALE_RSP_T *rsp=(JSCALE_RSP_T*)(SRAM_PTR+0x20); -+ -+unsigned int jscale_status=0; -+ -+#define JSCALE_WAIT 0 -+#define XXXXXX_WAIT 1 -+#define MAX_WAIT_Q 8 -+wait_queue_head_t gemini_ipi_wait[MAX_WAIT_Q]; -+ -+#define DRAMCTL_DMA_CTL 0X20 -+#define DRAMCTL_DMA_SA 0X24 -+#define DRAMCTL_DMA_DA 0X28 -+#define DRAMCTL_DMA_CNT 0X2C -+#define MEMCPY_UNIT 0x40000 -+int hw_memcpy(const void *to, const void *from, unsigned int bytes) -+{ -+ unsigned int reg_a,reg_d; -+ int count = bytes,i=0; -+ -+ consistent_sync((unsigned int *)to, bytes, DMA_BIDIRECTIONAL); -+ consistent_sync((unsigned int *)from,bytes, DMA_TO_DEVICE); -+ -+ DEB(printk("hwmemcpy:count %d\n",count)); -+ while(count>0){ -+ // SA -+ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_SA; -+ reg_d = (unsigned int )__virt_to_phys(from) + i*MEMCPY_UNIT; -+ DEB(printk("hwmemcpy:from 0x%08x\n",reg_d)); -+ writel(reg_d,reg_a); -+ // DA -+ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_DA; -+ reg_d = (unsigned int )__virt_to_phys(to) + i*MEMCPY_UNIT; -+ writel(reg_d,reg_a); -+ DEB(printk("hwmemcpy:to 0x%08x\n",reg_d)); -+ // byte count -+ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CNT; -+ reg_d = (count>=MEMCPY_UNIT)?MEMCPY_UNIT:count; -+ writel(reg_d,reg_a); -+ // start DMA -+ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL; -+ writel(0x80000001,reg_a); -+ -+ do{ -+ cond_resched(); -+// msleep(4); -+ reg_d = readl(IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL); -+ }while(reg_d&0x1); -+ -+ count -= MEMCPY_UNIT; -+ i++; -+ } -+ -+ return bytes; -+} -+ -+static irqreturn_t ipi_interrupt() -+{ -+ unsigned int id=getcpuid(),tmp; -+ -+ //dmac_inv_range(__phys_to_virt(SL2312_SRAM_BASE),__phys_to_virt(SHAREADDR)+0x2000); -+ -+ -+ // Clear Interrupt -+ if(id==CPU0) { -+ tmp = readl(CPU1_STATUS); -+ tmp &= ~CPU_IPI_BIT_MASK; -+ writel(tmp,CPU1_STATUS); -+ } -+ else{ -+ tmp = readl(CPU0_STATUS); -+ tmp &= ~CPU_IPI_BIT_MASK; -+ writel(tmp,CPU0_STATUS); -+ } -+ -+ // -+ DEB(printk("ipi interrupt:0x%x\n",rsp->status)); -+ switch(rsp->status){ -+ case JSCALE_STATUS_OK: -+ -+ break; -+ case JSCALE_UNKNOWN_MSG_TYPE: -+ -+ break; -+ case JSCALE_FAILED_FILE_SIZE: -+ -+ break; -+ case JSCALE_FAILED_MALLOC: -+ -+ break; -+ case JSCALE_FAILED_FORMAT: -+ -+ break; -+ case JSCALE_DECODE_ERROR: -+ -+ break; -+ -+ } -+ jscale_status = rsp->status; -+// wake_up(&gemini_ipi_wait[JSCALE_WAIT]); -+ -+ return IRQ_HANDLED; -+} -+ -+static int gemini_ipi_open(struct inode *inode, struct file *file) -+{ -+ DEB(printk("ipi open\n")); -+ return 0; -+} -+ -+ -+static int gemini_ipi_release(struct inode *inode, struct file *file) -+{ -+ DEB(printk("ipi release\n")); -+ return 0; -+} -+ -+ -+static int gemini_ipi_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ JSCALE_RSP_T tmp; -+ -+ switch(cmd) { -+ case GEMINI_IPI_JSCALE_REQ: -+ DEB(printk("ipi:ioctl jscale request %dX%d Q:%d\n",req->ScaledImageWidth,req->ScaledImageHeight,req->ScaledImageQuality)); -+ if (copy_from_user(req, (JSCALE_REQ_T *)arg, sizeof(JSCALE_REQ_T))) -+ return -EFAULT; -+ req->hdr.type = IPC_JSCALE_REQ_MSG; -+ req->hdr.length = sizeof(JSCALE_REQ_T); -+ req->input_location = CPU_1_DATA_OFFSET; -+ req->output_location = CPU_1_DATA_OFFSET; -+ break; -+ case GEMINI_IPI_JSCALE_STAT: -+ DEB(printk("ipi:ioctl jscale stat \n")); -+ if(jscale_status==JSCALE_BUSY){ // not yet -+ tmp.status = JSCALE_BUSY; -+ if (copy_to_user((JSCALE_RSP_T *)arg,&tmp, sizeof(JSCALE_RSP_T))) -+ return -EFAULT; -+ } -+ else{ // finish or error -+ if (copy_to_user((JSCALE_RSP_T *)arg,rsp, sizeof(JSCALE_RSP_T))) -+ return -EFAULT; -+ } -+ break; -+ default: -+ printk("IPI: Error IOCTL number\n"); -+ return -ENOIOCTLCMD; -+ } -+ -+ return 0; -+} -+ -+#define SRAM_SIZE 0x2000 -+static ssize_t gemini_ipi_write(struct file *file_p, const char *buf, size_t count, loff_t * ppos) -+{ -+ int i=0,tmp=0,j; -+ const char *ptr=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET); -+ DEB(printk("ipi:write 0x%x to 0x%x length:%d\n",&buf,ptr,count)); -+ memcpy(ptr,buf,count); -+ consistent_sync(ptr,count, DMA_TO_DEVICE); -+ //hw_memcpy(ptr,&buf,count); -+ -+/* if(count>SRAM_SIZE){ -+ for(i=0;i<(count/SRAM_SIZE);i++) -+ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,SRAM_SIZE); -+ if(count%SRAM_SIZE) -+ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,count%SRAM_SIZE); -+ } -+ else -+ raid_memcpy(ptr,buf,count); -+*/ -+ -+/* for(i=0;iSRAM_SIZE){ -+ for(i=0;i<(count/SRAM_SIZE);i++) -+ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,SRAM_SIZE); -+ if(count%0xFFFF) -+ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,length%SRAM_SIZE); -+ } -+ else -+ raid_memcpy(buf,p_mbox->message,length); -+*/ -+ return length; -+} -+ -+void do_mapping_read(struct address_space *mapping, -+ struct file_ra_state *_ra, -+ struct file *filp, -+ loff_t *ppos, -+ read_descriptor_t *desc, -+ read_actor_t actor) -+{ -+ struct inode *inode = mapping->host; -+ unsigned long index; -+ unsigned long end_index; -+ unsigned long offset; -+ unsigned long last_index; -+ unsigned long next_index; -+ unsigned long prev_index; -+ loff_t isize; -+ struct page *cached_page; -+ int error; -+ struct file_ra_state ra = *_ra; -+ -+ cached_page = NULL; -+ index = *ppos >> PAGE_CACHE_SHIFT; -+ next_index = index; -+ prev_index = ra.prev_page; -+ last_index = (*ppos + desc->count + PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT; -+ offset = *ppos & ~PAGE_CACHE_MASK; -+ -+ isize = i_size_read(inode); -+ if (!isize) -+ goto out; -+ -+ end_index = (isize - 1) >> PAGE_CACHE_SHIFT; -+ for (;;) { -+ struct page *page; -+ unsigned long nr, ret; -+ -+ /* nr is the maximum number of bytes to copy from this page */ -+ nr = PAGE_CACHE_SIZE; -+ if (index >= end_index) { -+ if (index > end_index) -+ goto out; -+ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1; -+ if (nr <= offset) { -+ goto out; -+ } -+ } -+ nr = nr - offset; -+ -+ cond_resched(); -+ if (index == next_index) -+ next_index = page_cache_readahead(mapping, &ra, filp, -+ index, last_index - index); -+ -+find_page: -+ page = find_get_page(mapping, index); -+ if (unlikely(page == NULL)) { -+ handle_ra_miss(mapping, &ra, index); -+ goto no_cached_page; -+ } -+ if (!PageUptodate(page)) -+ goto page_not_up_to_date; -+page_ok: -+ -+ /* If users can be writing to this page using arbitrary -+ * virtual addresses, take care about potential aliasing -+ * before reading the page on the kernel side. -+ */ -+ if (mapping_writably_mapped(mapping)) -+ flush_dcache_page(page); -+ -+ /* -+ * When (part of) the same page is read multiple times -+ * in succession, only mark it as accessed the first time. -+ */ -+ if (prev_index != index) -+ mark_page_accessed(page); -+ prev_index = index; -+ -+ /* -+ * Ok, we have the page, and it's up-to-date, so -+ * now we can copy it to user space... -+ * -+ * The actor routine returns how many bytes were actually used.. -+ * NOTE! This may not be the same as how much of a user buffer -+ * we filled up (we may be padding etc), so we can only update -+ * "pos" here (the actor routine has to update the user buffer -+ * pointers and the remaining count). -+ */ -+ ret = actor(desc, page, offset, nr); -+ offset += ret; -+ index += offset >> PAGE_CACHE_SHIFT; -+ offset &= ~PAGE_CACHE_MASK; -+ -+ page_cache_release(page); -+ if (ret == nr && desc->count) -+ continue; -+ goto out; -+ -+page_not_up_to_date: -+ /* Get exclusive access to the page ... */ -+ lock_page(page); -+ -+ /* Did it get unhashed before we got the lock? */ -+ if (!page->mapping) { -+ unlock_page(page); -+ page_cache_release(page); -+ continue; -+ } -+ -+ /* Did somebody else fill it already? */ -+ if (PageUptodate(page)) { -+ unlock_page(page); -+ goto page_ok; -+ } -+ -+readpage: -+ /* Start the actual read. The read will unlock the page. */ -+ error = mapping->a_ops->readpage(filp, page); -+ -+ if (unlikely(error)) -+ goto readpage_error; -+ -+ if (!PageUptodate(page)) { -+ lock_page(page); -+ if (!PageUptodate(page)) { -+ if (page->mapping == NULL) { -+ /* -+ * invalidate_inode_pages got it -+ */ -+ unlock_page(page); -+ page_cache_release(page); -+ goto find_page; -+ } -+ unlock_page(page); -+ error = -EIO; -+ goto readpage_error; -+ } -+ unlock_page(page); -+ } -+ -+ /* -+ * i_size must be checked after we have done ->readpage. -+ * -+ * Checking i_size after the readpage allows us to calculate -+ * the correct value for "nr", which means the zero-filled -+ * part of the page is not copied back to userspace (unless -+ * another truncate extends the file - this is desired though). -+ */ -+ isize = i_size_read(inode); -+ end_index = (isize - 1) >> PAGE_CACHE_SHIFT; -+ if (unlikely(!isize || index > end_index)) { -+ page_cache_release(page); -+ goto out; -+ } -+ -+ /* nr is the maximum number of bytes to copy from this page */ -+ nr = PAGE_CACHE_SIZE; -+ if (index == end_index) { -+ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1; -+ if (nr <= offset) { -+ page_cache_release(page); -+ goto out; -+ } -+ } -+ nr = nr - offset; -+ goto page_ok; -+ -+readpage_error: -+ /* UHHUH! A synchronous read error occurred. Report it */ -+ desc->error = error; -+ page_cache_release(page); -+ goto out; -+ -+no_cached_page: -+ /* -+ * Ok, it wasn't cached, so we need to create a new -+ * page.. -+ */ -+ if (!cached_page) { -+ cached_page = page_cache_alloc_cold(mapping); -+ if (!cached_page) { -+ desc->error = -ENOMEM; -+ goto out; -+ } -+ } -+ error = add_to_page_cache_lru(cached_page, mapping, -+ index, GFP_KERNEL); -+ if (error) { -+ if (error == -EEXIST) -+ goto find_page; -+ desc->error = error; -+ goto out; -+ } -+ page = cached_page; -+ cached_page = NULL; -+ goto readpage; -+ } -+ -+out: -+ *_ra = ra; -+ -+ *ppos = ((loff_t) index << PAGE_CACHE_SHIFT) + offset; -+ if (cached_page) -+ page_cache_release(cached_page); -+ if (filp) -+ file_accessed(filp); -+} -+ -+int ipi_send_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size) -+{ -+ ssize_t written; -+ unsigned long count = desc->count; -+ struct file *file = desc->arg.data; -+ unsigned int *ptr_to=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET) + desc->written; -+ void *ptr_from; -+ -+ if (size > count) -+ size = count; -+ -+ ptr_from = page_address(page)+offset; -+ written = memcpy(ptr_to,ptr_from,size); -+ -+ if (written < 0) { -+ desc->error = written; -+ written = 0; -+ } -+ desc->count = count - written; -+ desc->written += written; -+ return written; -+} -+ -+ssize_t gemini_ipi_sendfile(struct file *in_file, loff_t *ppos, -+ size_t count, read_actor_t actor, void *TARGET) -+{ -+ read_descriptor_t desc; -+ -+ if (!count) -+ return 0; -+ -+ desc.written = 0; -+ desc.count = count; -+ desc.arg.data = TARGET; -+ desc.error = 0; -+ -+ do_mapping_read(in_file->f_mapping,&in_file->f_ra,in_file, ppos, &desc, ipi_send_actor); -+ -+ if (desc.written) -+ return desc.written; -+ return desc.error; -+} -+static struct file_operations gemini_ipi_fops = { -+ .owner = THIS_MODULE, -+ .ioctl = gemini_ipi_ioctl, -+ .open = gemini_ipi_open, -+ .release= gemini_ipi_release, -+ .write = gemini_ipi_write, -+ .read = gemini_ipi_read, -+ .sendfile = gemini_ipi_sendfile, -+}; -+ -+#ifndef STORLINK_IPI -+#define STORLINK_IPI 242 // Documents/devices.txt suggest to use 240~255 for local driver!! -+#endif -+ -+static struct miscdevice gemini_ipi_miscdev = -+{ -+ STORLINK_IPI, -+ "slave_ipc", -+ &gemini_ipi_fops -+}; -+ -+int __init sl_ipi_init(void) -+{ -+ -+ printk("Gemini IPI Driver Initialization...\n"); -+ printk("REQ Head :0x%x(phy:0x%x)\n",(unsigned int)req,(unsigned int)SL2312_SRAM_BASE); -+ printk("RSP Head :0x%x(phy:0x%x)\n",(unsigned int)rsp,(unsigned int)SL2312_SRAM_BASE+0x20); -+ printk("Data buff:0x%x(phy:0x%x)\n",__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET),CPU_1_MEM_BASE+CPU_1_DATA_OFFSET); -+ -+ misc_register(&gemini_ipi_miscdev); -+ -+ if (request_irq(IRQ_CPU0_IP_IRQ_OFFSET, ipi_interrupt, SA_INTERRUPT, "ipi", NULL)) -+ printk("Error: Register IRQ for Storlink IPI failed\n"); -+ -+ return 0; -+} -+ -+void __exit sl_ipi_exit(void) -+{ -+ -+} -+ -+module_init(sl_ipi_init); -+module_exit(sl_ipi_exit); -+ -+MODULE_AUTHOR("Jason Lee "); -+MODULE_DESCRIPTION("Storlink IPI driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/arch/arm/mach-sl2312/hw_xor.h -@@ -0,0 +1,573 @@ -+/* -+* linux/include/asm-arm/xor.h -+* -+* Copyright (C) 2001 Storlink Semi. -+* Jason Lee -+* -+*/ -+#include -+#include -+//#include -+ -+#undef BIG_ENDIAN -+#define CPU 0 -+#define DMA 1 -+ -+#define DESC_NO 8 -+#define TX_DESC_NUM DESC_NO -+#define RX_DESC_NUM DESC_NO -+ -+#define RAID_BASE_ADDR IO_ADDRESS(SL2312_RAID_BASE) -+ -+#define SRAM_PAR_0k 0 -+#define SRAM_PAR_4k 1 -+#define SRAM_PAR_8k 2 -+#define SRAM_PAR_16k 3 -+#define SRAM_PAR_SIZE SRAM_PAR_8k -+ -+#define RUNNING 0x1 -+#define COMPLETE 0x2 -+#define ERROR 0x4 -+ -+#define CMD_XOR 0x0 -+#define CMD_FILL 0x1 -+#define CMD_CPY 0x3 -+#define CMD_CHK 0x4 -+ -+enum RAID_DMA_REGISTER { -+ RAID_DMA_DEVICE_ID = 0xff00, -+ RAID_DMA_STATUS = 0xff04, -+ RAID_FCHDMA_CTRL = 0xff08, -+ RAID_FCHDMA_FIRST_DESC = 0xff0C, -+ RAID_FCHDMA_CURR_DESC = 0xff10, -+ RAID_STRDMA_CTRL = 0xff14, -+ RAID_STRDMA_FIRST_DESC = 0xff18, -+ RAID_STRDMA_CURR_DESC = 0xff1C, -+ RAID_TX_FLG_REG = 0xff24, -+ RAID_RX_FLG_REG = 0xff34, -+ RAID_PCR = 0xff50, -+ SMC_CMD_REG = 0xff60, -+ SMC_STATUS_REG = 0xff64 -+ }; -+ -+enum RAID_FUNC_MODE { -+ RAID_XOR = 0, -+ RAID_MIX = 2, -+ RAID_SRAM = 3, -+ RAID_ENDIAN = 4, -+ RAID_MEM_BLK = 5, -+ RAID_MEM2MEM = 7, -+ RAID_BUF_SIZE = 8, -+ RAID_ERR_TEST = 9, -+ RAID_BURST = 10, -+ RAID_BUS = 11 -+ }; -+ -+typedef struct reg_info { -+ int mask; -+ char err[32]; -+ int offset; -+} REG_INFO; -+ -+/********************************************************/ -+/* the definition of RAID DMA Module Register */ -+/********************************************************/ -+typedef union -+{ -+ unsigned int bit32; -+ struct bits_ff00 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int : 8; -+ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/ -+ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */ -+ unsigned int device_id : 12; -+ unsigned int revision_id : 4; -+ #else -+ unsigned int revision_id : 4; -+ unsigned int device_id : 12; -+ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */ -+ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/ -+ unsigned int : 8; -+ #endif -+ } bits; -+} RAID_DMA_DEVICE_ID_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bits_ff04 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int tsFinishI : 1; /* owner bit error interrupt */ -+ unsigned int tsDErrI : 1; /* AHB bus error interrupt */ -+ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */ -+ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */ -+ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */ -+ unsigned int rsFinishI : 1; /* owner bit error interrupt */ -+ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */ -+ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */ -+ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */ -+ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */ -+ unsigned int inter : 8; /* pattern check error interrupt */ -+ unsigned int : 5; -+ unsigned int Loopback : 1; /* loopback */ -+ unsigned int intEnable : 8; /*pattern check error interrupt enable */ -+ #else -+ unsigned int intEnable : 8; /*pattern check error interrupt enable */ -+ unsigned int Loopback : 1; /* loopback */ -+ unsigned int : 5; -+ unsigned int inter : 8; /* pattern check error interrupt */ -+ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */ -+ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */ -+ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */ -+ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */ -+ unsigned int rsFinishI : 1; /* owner bit error interrupt */ -+ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */ -+ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */ -+ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */ -+ unsigned int tsDErrI : 1; /* AHB bus error interrupt */ -+ unsigned int tsFinishI : 1; /* owner bit error interrupt */ -+ #endif -+ } bits; -+} RAID_DMA_STATUS_T; -+ -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bits_ff08 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int td_start : 1; /* Start DMA transfer */ -+ unsigned int td_continue : 1; /* Continue DMA operation */ -+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int : 1; -+ unsigned int td_prot : 4; /* DMA protection control */ -+ unsigned int td_burst_size : 2; /* DMA max burst size for every AHB request */ -+ unsigned int td_bus : 2; /* peripheral bus width */ -+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int : 14; -+ #else -+ unsigned int : 14; -+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ -+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ -+ unsigned int td_prot : 4; /* TxDMA protection control */ -+ unsigned int : 1; -+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int td_continue : 1; /* Continue DMA operation */ -+ unsigned int td_start : 1; /* Start DMA transfer */ -+ #endif -+ } bits; -+} RAID_TXDMA_CTRL_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bits_ff0c -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int td_first_des_ptr : 28;/* first descriptor address */ -+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ -+ unsigned int : 3; -+ #else -+ unsigned int : 3; -+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ -+ unsigned int td_first_des_ptr : 28;/* first descriptor address */ -+ #endif -+ } bits; -+} RAID_TXDMA_FIRST_DESC_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bits_ff10 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int ndar : 28; /* next descriptor address */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int : 1; -+ unsigned int sof_eof : 2; -+ #else -+ unsigned int sof_eof : 2; -+ unsigned int : 1; -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int ndar : 28; /* next descriptor address */ -+ #endif -+ } bits; -+} RAID_TXDMA_CURR_DESC_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bits_ff14 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int rd_start : 1; /* Start DMA transfer */ -+ unsigned int rd_continue : 1; /* Continue DMA operation */ -+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int : 1; -+ unsigned int rd_prot : 4; /* DMA protection control */ -+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ -+ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ -+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int : 14; -+ #else -+ unsigned int : 14; -+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ -+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ -+ unsigned int rd_prot : 4; /* DMA protection control */ -+ unsigned int : 1; -+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int rd_continue : 1; /* Continue DMA operation */ -+ unsigned int rd_start : 1; /* Start DMA transfer */ -+ #endif -+ } bits; -+} RAID_RXDMA_CTRL_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bits_ff18 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ -+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ -+ unsigned int : 3; -+ #else -+ unsigned int : 3; -+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ -+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ -+ #endif -+ } bits; -+} RAID_RXDMA_FIRST_DESC_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bits_ff1c -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int ndar : 28; /* next descriptor address */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ -+ unsigned int sof_eof : 2; -+ #else -+ unsigned int sof_eof : 2; -+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int ndar : 28; /* next descriptor address */ -+ #endif -+ } bits; -+} RAID_RXDMA_CURR_DESC_T; -+ -+typedef union -+{ -+ unsigned int bit32; -+ struct bits_ff50 -+ { -+ unsigned int pat : 32; /* data for pattern check */ -+ } bits; -+} RAID_PACR_T; -+ -+/******************************************************/ -+/* the definition of DMA Descriptor Register */ -+/******************************************************/ -+typedef struct raid_descriptor_t -+{ -+ union func_ctrl_t -+ { -+ unsigned int bit32; -+ struct bits_0000 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int own : 1; /* owner bit */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */ -+ unsigned int desc_cnt : 6; -+ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/ -+ #else -+ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/ -+ unsigned int desc_cnt : 6; -+ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */ -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int own : 1; /* owner bit */ -+ #endif -+ } bits; -+ } func_ctrl; -+ -+ union flg_status_t -+ { -+ unsigned int bits32; -+ struct bit_004 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int bcc : 16; -+ unsigned int : 13 -+ unsigned int mode : 3; -+ #else -+ unsigned int mode : 3; -+ unsigned int : 13; -+ unsigned int bcc : 16; -+ #endif -+ } bits_cmd_status; -+ } flg_status; //Sanders -+ -+ unsigned int buf_addr; -+ -+ union next_desc_addr_t -+ { -+ unsigned int bits32; -+ struct bits_000c -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int ndar : 28; /* next descriptor address */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int : 1; -+ unsigned int sof_eof : 2; /* the position of the descriptor in chain */ -+ #else -+ unsigned int sof_eof : 2; /* the position of the descriptor in chain */ -+ unsigned int : 1; -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int ndar : 28; /* next descriptor address */ -+ #endif -+ } bits; -+ } next_desc_addr; -+} RAID_DESCRIPTOR_T; -+ -+/******************************************************/ -+/* the offset of RAID SMC register */ -+/******************************************************/ -+enum RAID_SMC_REGISTER { -+ RAID_SMC_CMD_REG = 0xff60, -+ RAID_SMC_STATUS_REG = 0xff64 -+ }; -+ -+/******************************************************/ -+/* the definition of RAID SMC module register */ -+/******************************************************/ -+typedef union -+{ -+ unsigned int bits32; -+ struct bits_ff60 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int pat_mode : 2; /* partition mode selection */ -+ unsigned int : 14; -+ unsigned int device_id : 12; -+ unsigned int revision_id : 4; -+ #else -+ unsigned int revision_id : 4; -+ unsigned int device_id : 12; -+ unsigned int : 14; -+ unsigned int pat_mode : 2; /* partition mode selection */ -+ #endif -+ } bits; -+} RAID_SMC_CMD; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bits_ff64 -+ { -+ #ifdef BIG_ENDIAN -+ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */ -+ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */ -+ unsigned int : 14; -+ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */ -+ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */ -+ unsigned int : 14; -+ #else -+ unsigned int : 14; -+ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */ -+ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */ -+ unsigned int : 14; -+ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */ -+ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */ -+ #endif -+ } bits; -+} RAID_SMC_STATUS; -+ -+typedef struct RAID_S -+{ -+ const char *device_name; -+ wait_queue_head_t wait; -+ unsigned int busy; -+ int irq; -+ unsigned int status; -+ RAID_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address */ -+ RAID_DESCRIPTOR_T *rx_desc; /* point ot virtual RX descriptor address */ -+ RAID_DESCRIPTOR_T *tx_cur_desc; /* current TX descriptor */ -+ RAID_DESCRIPTOR_T *rx_cur_desc; /* current RX descriptor */ -+ RAID_DESCRIPTOR_T *tx_finished_desc; -+ RAID_DESCRIPTOR_T *rx_finished_desc; -+ RAID_DESCRIPTOR_T *tx_first_desc; -+ RAID_DESCRIPTOR_T *rx_first_desc; -+ -+// unsigned int *tx_buf[TX_DESC_NUM]; -+ unsigned int *rx_desc_dma; // physical address of rx_descript -+ unsigned int *tx_desc_dma; // physical address of tx_descript -+ unsigned int *rx_bufs_dma; -+ unsigned int *tx_bufs_dma; -+ -+} RAID_T; -+ -+struct reg_ioctl -+{ -+ unsigned int reg_addr; -+ unsigned int val_in; -+ unsigned int val_out; -+}; -+ -+typedef struct dma_ctrl { -+ int sram; -+ int prot; -+ int burst; -+ int bus; -+ int endian; -+ int mode; -+} DMA_CTRL; -+ -+ -+#ifdef XOR_SW_FILL_IN -+ -+#define __XOR(a1, a2) a1 ^= a2 -+ -+#define GET_BLOCK_2(dst) \ -+ __asm__("ldmia %0, {%1, %2}" \ -+ : "=r" (dst), "=r" (a1), "=r" (a2) \ -+ : "0" (dst)) -+ -+#define GET_BLOCK_4(dst) \ -+ __asm__("ldmia %0, {%1, %2, %3, %4}" \ -+ : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \ -+ : "0" (dst)) -+ -+#define XOR_BLOCK_2(src) \ -+ __asm__("ldmia %0!, {%1, %2}" \ -+ : "=r" (src), "=r" (b1), "=r" (b2) \ -+ : "0" (src)); \ -+ __XOR(a1, b1); __XOR(a2, b2); -+ -+#define XOR_BLOCK_4(src) \ -+ __asm__("ldmia %0!, {%1, %2, %3, %4}" \ -+ : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \ -+ : "0" (src)); \ -+ __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4) -+ -+#define PUT_BLOCK_2(dst) \ -+ __asm__ __volatile__("stmia %0!, {%2, %3}" \ -+ : "=r" (dst) \ -+ : "0" (dst), "r" (a1), "r" (a2)) -+ -+#define PUT_BLOCK_4(dst) \ -+ __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \ -+ : "=r" (dst) \ -+ : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4)) -+ -+static void -+xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) -+{ -+ unsigned int lines = bytes / sizeof(unsigned long) / 4; -+ register unsigned int a1 __asm__("r4"); -+ register unsigned int a2 __asm__("r5"); -+ register unsigned int a3 __asm__("r6"); -+ register unsigned int a4 __asm__("r7"); -+ register unsigned int b1 __asm__("r8"); -+ register unsigned int b2 __asm__("r9"); -+ register unsigned int b3 __asm__("ip"); -+ register unsigned int b4 __asm__("lr"); -+ -+ do { -+ GET_BLOCK_4(p1); -+ XOR_BLOCK_4(p2); -+ PUT_BLOCK_4(p1); -+ } while (--lines); -+} -+ -+static void -+xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, -+ unsigned long *p3) -+{ -+ unsigned int lines = bytes / sizeof(unsigned long) / 4; -+ register unsigned int a1 __asm__("r4"); -+ register unsigned int a2 __asm__("r5"); -+ register unsigned int a3 __asm__("r6"); -+ register unsigned int a4 __asm__("r7"); -+ register unsigned int b1 __asm__("r8"); -+ register unsigned int b2 __asm__("r9"); -+ register unsigned int b3 __asm__("ip"); -+ register unsigned int b4 __asm__("lr"); -+ -+ do { -+ GET_BLOCK_4(p1); -+ XOR_BLOCK_4(p2); -+ XOR_BLOCK_4(p3); -+ PUT_BLOCK_4(p1); -+ } while (--lines); -+} -+ -+static void -+xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, -+ unsigned long *p3, unsigned long *p4) -+{ -+ unsigned int lines = bytes / sizeof(unsigned long) / 2; -+ register unsigned int a1 __asm__("r8"); -+ register unsigned int a2 __asm__("r9"); -+ register unsigned int b1 __asm__("ip"); -+ register unsigned int b2 __asm__("lr"); -+ -+ do { -+ GET_BLOCK_2(p1); -+ XOR_BLOCK_2(p2); -+ XOR_BLOCK_2(p3); -+ XOR_BLOCK_2(p4); -+ PUT_BLOCK_2(p1); -+ } while (--lines); -+} -+ -+static void -+xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, -+ unsigned long *p3, unsigned long *p4, unsigned long *p5) -+{ -+ unsigned int lines = bytes / sizeof(unsigned long) / 2; -+ register unsigned int a1 __asm__("r8"); -+ register unsigned int a2 __asm__("r9"); -+ register unsigned int b1 __asm__("ip"); -+ register unsigned int b2 __asm__("lr"); -+ -+ do { -+ GET_BLOCK_2(p1); -+ XOR_BLOCK_2(p2); -+ XOR_BLOCK_2(p3); -+ XOR_BLOCK_2(p4); -+ XOR_BLOCK_2(p5); -+ PUT_BLOCK_2(p1); -+ } while (--lines); -+} -+#endif //XOR_SW_FILL_IN -+ ---- /dev/null -+++ b/arch/arm/mach-sl2312/irq.c -@@ -0,0 +1,202 @@ -+/* -+ * linux/arch/arm/mach-epxa10db/irq.c -+ * -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_PCI -+#include -+#endif -+ -+int fixup_irq(unsigned int irq) -+{ -+#ifdef CONFIG_PCI -+ if (irq == IRQ_PCI) { -+ return sl2312_pci_get_int_src(); -+ } -+#endif -+ return irq; -+} -+ -+static void sl2312_ack_irq(unsigned int irq) -+{ -+ __raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+} -+ -+static void sl2312_mask_irq(unsigned int irq) -+{ -+ unsigned int mask; -+ -+#ifdef CONFIG_PCI -+ if (irq >= PCI_IRQ_OFFSET) -+ { -+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ mask &= ~IRQ_PCI_MASK ; -+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ sl2312_pci_mask_irq(irq - PCI_IRQ_OFFSET); -+ } -+ else -+#endif -+ if(irq >= FIQ_OFFSET) -+ { -+ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ mask &= ~(1 << (irq - FIQ_OFFSET)); -+ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ } -+ else -+ { -+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ mask &= ~(1 << irq); -+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ } -+ -+} -+ -+static void sl2312_unmask_irq(unsigned int irq) -+{ -+ unsigned int mask; -+ -+#ifdef CONFIG_PCI -+ if (irq >= PCI_IRQ_OFFSET) -+ { -+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ mask |= IRQ_PCI_MASK ; -+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ sl2312_pci_unmask_irq(irq - PCI_IRQ_OFFSET); -+ } -+ else -+#endif -+ if(irq >= FIQ_OFFSET) -+ { -+ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ mask |= (1 << (irq - FIQ_OFFSET)); -+ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ } -+ else -+ { -+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ mask |= (1 << irq); -+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ } -+} -+ -+static struct irq_chip sl2312_level_irq = { -+ .ack = sl2312_mask_irq, -+ .mask = sl2312_mask_irq, -+ .unmask = sl2312_unmask_irq, -+// .set_type = ixp4xx_set_irq_type, -+}; -+ -+static struct irq_chip sl2312_edge_irq = { -+ .ack = sl2312_ack_irq, -+ .mask = sl2312_mask_irq, -+ .unmask = sl2312_unmask_irq, -+// .set_type = ixp4xx_set_irq_type, -+}; -+ -+static struct resource irq_resource = { -+ .name = "irq_handler", -+ .start = IO_ADDRESS(SL2312_INTERRUPT_BASE), -+ .end = IO_ADDRESS(FIQ_STATUS(SL2312_INTERRUPT_BASE))+4, -+}; -+ -+void __init sl2312_init_irq(void) -+{ -+ unsigned int i, mode, level; -+ -+ request_resource(&iomem_resource, &irq_resource); -+ -+ for (i = 0; i < NR_IRQS; i++) -+ { -+ if((i>=IRQ_TIMER1 && i<=IRQ_TIMER3)||(i>=IRQ_SERIRQ0 && i<=IRQ_SERIRQ_MAX)) -+ { -+ set_irq_chip(i, &sl2312_edge_irq); -+ set_irq_handler(i, handle_edge_irq); -+ } -+ else -+ { -+ set_irq_chip(i, &sl2312_level_irq); -+ set_irq_handler(i,handle_level_irq); -+ } -+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE); -+ } -+ -+ /* Disable all interrupt */ -+ __raw_writel(0,IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ __raw_writel(0,FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ -+ /* Set interrupt mode */ -+ /* emac & ipsec type is level trigger and high active */ -+ mode = __raw_readl(IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ level = __raw_readl(IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ -+ mode &= ~IRQ_GMAC0_MASK; -+ level &= ~IRQ_GMAC0_MASK; -+ -+ mode &= ~IRQ_GMAC1_MASK; -+ level &= ~IRQ_GMAC1_MASK; -+ -+ mode &= ~IRQ_IPSEC_MASK; -+ level &= ~IRQ_IPSEC_MASK; -+ -+ // for IDE0,1, high active and level trigger -+ mode &= ~IRQ_IDE0_MASK; -+ level &= ~IRQ_IDE0_MASK; -+ mode &= ~IRQ_IDE1_MASK; -+ level &= ~IRQ_IDE1_MASK; -+ -+ -+ // for PCI, high active and level trigger -+ mode &= ~IRQ_PCI_MASK; -+ level &= ~IRQ_PCI_MASK; -+ -+ // for USB, high active and level trigger -+ mode &= ~IRQ_USB0_MASK; -+ level &= ~IRQ_USB0_MASK; -+ -+ mode &= ~IRQ_USB1_MASK; -+ level &= ~IRQ_USB1_MASK; -+ -+ // for LPC, high active and edge trigger -+ mode |= 0xffff0000; -+ level &= 0x0000ffff; -+ -+ // for GPIO, high active and level trigger -+ mode &= ~(IRQ_GPIO_MASK); -+ level &= ~(IRQ_GPIO_MASK); -+ -+ mode &= ~(IRQ_GPIO1_MASK); -+ level &= ~(IRQ_GPIO1_MASK); -+ -+ mode &= ~(IRQ_GPIO2_MASK); -+ level &= ~(IRQ_GPIO2_MASK); -+ -+ __raw_writel(mode,IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ __raw_writel(level,IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); -+ -+} ---- /dev/null -+++ b/arch/arm/mach-sl2312/lpc.c -@@ -0,0 +1,125 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * ITE Semi IT8712 Super I/O functions. -+ * -+ * Copyright 2001 MontaVista Software Inc. -+ * Author: MontaVista Software, Inc. -+ * ppopov@mvista.com or source@mvista.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifndef TRUE -+#define TRUE 1 -+#endif -+ -+#ifndef FALSE -+#define FALSE 0 -+#endif -+ -+ -+// MB PnP configuration register -+#define LPC_KEY_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2e) -+#define LPC_DATA_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2f) -+ -+#define LPC_BUS_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 0) -+#define LPC_BUS_STATUS *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 2) -+#define LPC_SERIAL_IRQ_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 4) -+ -+int it8712_exist; -+ -+static void LPCEnterMBPnP(void) -+{ -+ int i; -+ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55}; -+ -+ for (i = 0; i<4; i++) -+ outb(key[i], LPC_KEY_ADDR); -+ -+} -+ -+static void LPCExitMBPnP(void) -+{ -+ outb(0x02, LPC_KEY_ADDR); -+ outb(0x02, LPC_DATA_ADDR); -+} -+ -+void LPCSetConfig(char LdnNumber, char Index, char data) -+{ -+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode -+ outb(0x07, LPC_KEY_ADDR); -+ outb(LdnNumber, LPC_DATA_ADDR); -+ outb(Index, LPC_KEY_ADDR); -+ outb(data, LPC_DATA_ADDR); -+ LPCExitMBPnP(); -+} -+ -+char LPCGetConfig(char LdnNumber, char Index) -+{ -+ char rtn; -+ -+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode -+ outb(0x07, LPC_KEY_ADDR); -+ outb(LdnNumber, LPC_DATA_ADDR); -+ outb(Index, LPC_KEY_ADDR); -+ rtn = inb(LPC_DATA_ADDR); -+ LPCExitMBPnP(); -+ return rtn; -+} -+ -+static int SearchIT8712(void) -+{ -+ unsigned char Id1, Id2; -+ unsigned short Id; -+ -+ LPCEnterMBPnP(); -+ outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */ -+ Id1 = inb(LPC_DATA_ADDR); -+ outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */ -+ Id2 = inb(LPC_DATA_ADDR); -+ Id = (Id1 << 8) | Id2; -+ LPCExitMBPnP(); -+ if (Id == 0x8712) -+ return TRUE; -+ else -+ return FALSE; -+} -+ -+int InitLPCInterface(void) -+{ -+ LPC_BUS_CTRL = 0xc0; -+ LPC_SERIAL_IRQ_CTRL = 0xc0; -+ mdelay(1); // wait for 1 serial IRQ cycle -+ LPC_SERIAL_IRQ_CTRL = 0x80; -+ it8712_exist = SearchIT8712(); -+ printk("IT8712 %s exist\n", it8712_exist?"":"doesn't"); -+ return 0; -+} -+ -+//__initcall(InitLPCInterface); ---- /dev/null -+++ b/arch/arm/mach-sl2312/mm.c -@@ -0,0 +1,80 @@ -+/* -+ * linux/arch/arm/mach-epxa10db/mm.c -+ * -+ * MM routines for Altera'a Epxa10db board -+ * -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* Page table mapping for I/O region */ -+static struct map_desc sl2312_io_desc[] __initdata = { -+#ifdef CONFIG_GEMINI_IPI -+{__phys_to_virt(CPU_1_MEM_BASE), __phys_to_pfn(CPU_1_MEM_BASE), SZ_64M, MT_MEMORY}, -+#endif -+{IO_ADDRESS(SL2312_SRAM_BASE), __phys_to_pfn(SL2312_SRAM_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_GLOBAL_BASE), __phys_to_pfn(SL2312_GLOBAL_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_WAQTCHDOG_BASE), __phys_to_pfn(SL2312_WAQTCHDOG_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_UART_BASE), __phys_to_pfn(SL2312_UART_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_TIMER_BASE), __phys_to_pfn(SL2312_TIMER_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_LCD_BASE), __phys_to_pfn(SL2312_LCD_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_RTC_BASE), __phys_to_pfn(SL2312_RTC_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_SATA_BASE), __phys_to_pfn(SL2312_SATA_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_LPC_HOST_BASE), __phys_to_pfn(SL2312_LPC_HOST_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_LPC_IO_BASE), __phys_to_pfn(SL2312_LPC_IO_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_INTERRUPT_BASE), __phys_to_pfn(SL2312_INTERRUPT_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_INTERRUPT1_BASE), __phys_to_pfn(SL2312_INTERRUPT1_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_SSP_CTRL_BASE), __phys_to_pfn(SL2312_SSP_CTRL_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_POWER_CTRL_BASE), __phys_to_pfn(SL2312_POWER_CTRL_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_CIR_BASE), __phys_to_pfn(SL2312_CIR_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_GPIO_BASE), __phys_to_pfn(SL2312_GPIO_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_GPIO_BASE1), __phys_to_pfn(SL2312_GPIO_BASE1), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_GPIO_BASE2), __phys_to_pfn(SL2312_GPIO_BASE2), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_PCI_IO_BASE), __phys_to_pfn(SL2312_PCI_IO_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_PCI_MEM_BASE), __phys_to_pfn(SL2312_PCI_MEM_BASE), SZ_512K, MT_DEVICE}, -+#ifdef CONFIG_NET_SL351X -+{IO_ADDRESS(SL2312_TOE_BASE), __phys_to_pfn(SL2312_TOE_BASE) , SZ_512K, MT_DEVICE}, -+#endif -+{IO_ADDRESS(SL2312_GMAC0_BASE), __phys_to_pfn(SL2312_GMAC0_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_GMAC1_BASE), __phys_to_pfn(SL2312_GMAC1_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_SECURITY_BASE), __phys_to_pfn(SL2312_SECURITY_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_IDE0_BASE), __phys_to_pfn(SL2312_IDE0_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_IDE1_BASE), __phys_to_pfn(SL2312_IDE1_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_RAID_BASE), __phys_to_pfn(SL2312_RAID_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_FLASH_CTRL_BASE), __phys_to_pfn(SL2312_FLASH_CTRL_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_GENERAL_DMA_BASE), __phys_to_pfn(SL2312_GENERAL_DMA_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_USB0_BASE), __phys_to_pfn(SL2312_USB_BASE), SZ_512K, MT_DEVICE}, -+{IO_ADDRESS(SL2312_USB1_BASE), __phys_to_pfn(SL2312_USB1_BASE), SZ_512K, MT_DEVICE}, -+{FLASH_VADDR(SL2312_FLASH_BASE), __phys_to_pfn(SL2312_FLASH_BASE), SZ_16M, MT_DEVICE}, -+}; -+ -+void __init sl2312_map_io(void) -+{ -+ iotable_init(sl2312_io_desc, ARRAY_SIZE(sl2312_io_desc)); -+} ---- /dev/null -+++ b/arch/arm/mach-sl2312/pci.c -@@ -0,0 +1,359 @@ -+/* -+ * linux/arch/arm/mach-sl2312/pci_sl2312.c -+ * -+ * PCI functions for sl2312 host PCI bridge -+ * -+ * Copyright (C) 2003 StorLink Corp. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+//#define DEBUG -+ -+// sl2312 PCI bridge access routines -+ -+#define PCI_IOSIZE_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE))) -+#define PCI_PROT_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x04)) -+#define PCI_CTRL_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x08)) -+#define PCI_SOFTRST_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x10)) -+#define PCI_CONFIG_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x28)) -+#define PCI_DATA_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x2C)) -+ -+static spinlock_t sl2312_pci_lock = SPIN_LOCK_UNLOCKED; -+// for initialize PCI devices -+struct resource pci_ioport_resource = { -+ .name = "PCI I/O Space", -+ .start = IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x100, -+ .end = IO_ADDRESS(SL2312_PCI_IO_BASE) + SZ_512K - 1, -+ .flags = IORESOURCE_IO, -+}; -+struct resource pci_iomem_resource = { -+ .name = "PCI Mem Space", -+ .start = SL2312_PCI_MEM_BASE, -+ .end = SL2312_PCI_MEM_BASE + SZ_128M - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static int sl2312_read_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 *val) -+{ -+ unsigned long addr,data; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&sl2312_pci_lock, flags); -+ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3); -+ PCI_CONFIG_REG = addr; -+ data = PCI_DATA_REG; -+ -+ switch (size) { -+ case 1: -+ *val = (u8) (data >> ((where & 0x03) * 8)); -+ break; -+ case 2: -+ *val = (u16) (data >> ((where & 0x02) * 8)); -+ break; -+ case 4: -+ *val = data; -+ if ((where >= 0x10) && (where <= 0x24)) { -+ if ((*val & 0xfff00000) == SL2312_PCI_IO_BASE) { -+ *val &= 0x000fffff; -+ *val |= IO_ADDRESS(SL2312_PCI_IO_BASE); -+ } -+ } -+ break; -+ } -+ spin_unlock_irqrestore(&sl2312_pci_lock, flags); -+// printk("READ==>slot=%d fn=%d where=%d value=%x\n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,*val); -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int sl2312_write_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 val) -+{ -+ unsigned long addr,data; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&sl2312_pci_lock, flags); -+ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3); -+ PCI_CONFIG_REG = addr; -+ data = PCI_DATA_REG; -+ -+ switch (size) { -+ case 1: -+ data &= ~(0xff << ((where & 0x03) * 8)); -+ data |= (val << ((where & 0x03) * 8)); -+ PCI_DATA_REG = data; -+ break; -+ case 2: -+ data &= ~(0xffff << ((where & 0x02) * 8)); -+ data |= (val << ((where & 0x02) * 8)); -+ PCI_DATA_REG = data; -+ break; -+ case 4: -+ if ((where >= 0x10) && (where <= 0x24)) { -+ if ((val & 0xfff00000) == IO_ADDRESS(SL2312_PCI_IO_BASE)) { -+ val &= 0x000fffff; -+ val |= SL2312_PCI_IO_BASE; -+ } -+ } -+ PCI_DATA_REG = val; -+ break; -+ } -+ spin_unlock_irqrestore(&sl2312_pci_lock, flags); -+ -+// printk("WRITE==> slot=%d fn=%d where=%d value=%x \n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,val); -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static struct pci_ops sl2312_pci_ops = { -+ .read = sl2312_read_config, -+ .write = sl2312_write_config, -+}; -+ -+ -+int __init sl2312_pci_setup_resources(struct resource **resource) -+{ -+ PCI_IOSIZE_REG = 0; // 1M IO size -+ PCI_CTRL_REG = 0x06; -+ -+ resource[0] = &pci_ioport_resource; -+ resource[1] = &pci_iomem_resource; -+ resource[2] = NULL; -+ -+ return 1; -+} -+ -+//static int sl2312_pci_fault(unsigned long addr, struct pt_regs *regs) -+//{ -+// return 1; -+//} -+ -+ -+/********************************************************************** -+ * MASK(disable) PCI interrupt -+ * 0: PCI INTA, 1: PCI INTB, ... // for Linux interrupt routing -+ * 16: PERR // for PCI module internal use -+ * 17: SERR,.. respect to PCI CTRL2 REG -+ **********************************************************************/ -+void sl2312_pci_mask_irq(unsigned int irq) -+{ -+ struct pci_bus bus; -+ unsigned int tmp; -+ -+ bus.number = 0; -+ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp); -+ if (irq < 16) { // for linux int routing -+ tmp &= ~(1 << (irq + 16 + 6)); -+ } -+ else { -+ tmp &= ~(1 << irq); -+ } -+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); -+} -+ -+/* UNMASK(enable) PCI interrupt */ -+void sl2312_pci_unmask_irq(unsigned int irq) -+{ -+ struct pci_bus bus; -+ unsigned int tmp; -+ -+ bus.number = 0; -+ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp); -+ if (irq < 16) { // for linux int routing -+ tmp |= (1 << (irq + 16 + 6)); -+ } -+ else { -+ tmp |= (1 << irq); -+ } -+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); -+} -+ -+/* Get PCI interrupt source */ -+int sl2312_pci_get_int_src(void) -+{ -+ struct pci_bus bus; -+ unsigned int tmp=0; -+ -+ bus.number = 0; -+ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp); -+ if (tmp & (1 << 28)) { // PCI INTA -+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); -+ return IRQ_PCI_INTA; -+ } -+ if (tmp & (1 << 29)) { // PCI INTB -+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); -+ return IRQ_PCI_INTB; -+ } -+ if (tmp & (1 << 30)) { // PCI INTC -+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); -+ return IRQ_PCI_INTC; -+ } -+ if (tmp & (1 << 31)) { // PCI INTD -+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); -+ return IRQ_PCI_INTD; -+ } -+ // otherwise, it should be a PCI error -+ return IRQ_PCI; -+} -+ -+static irqreturn_t sl2312_pci_irq(int irq, void *devid) -+{ -+ struct irq_desc *desc; -+ struct irqaction *action; -+ int retval = 0; -+ -+ return 1; -+ -+ irq = sl2312_pci_get_int_src(); -+ desc = &irq_desc[irq]; -+ action = desc->action; -+ do { -+ retval |= action->handler(irq, devid); -+ action = action->next; -+ } while (action); -+ -+ return 1; -+} -+ -+//extern int (*external_fault)(unsigned long addr, struct pt_regs *regs); -+ -+void __init sl2312_pci_preinit(void) -+{ -+ struct pci_bus bus; -+ unsigned long flags; -+ unsigned int temp; -+ int ret; -+ -+ /* -+ * Hook in our fault handler for PCI errors -+ */ -+// external_fault = sl2312_pci_fault; -+ -+ spin_lock_irqsave(&sl2312_pci_lock, flags); -+ -+ /* -+ * Grab the PCI interrupt. -+ */ -+ ret = request_irq(IRQ_PCI, sl2312_pci_irq, 0, "sl2312 pci int", NULL); -+ if (ret) -+ printk(KERN_ERR "PCI: unable to grab PCI error " -+ "interrupt: %d\n", ret); -+ -+ spin_unlock_irqrestore(&sl2312_pci_lock, flags); -+ -+ // setup pci bridge -+ bus.number = 0; /* device 0, function 0 */ -+ temp = (SL2312_PCI_DMA_MEM1_BASE & 0xfff00000) | (SL2312_PCI_DMA_MEM1_SIZE << 16); -+ sl2312_write_config(&bus, 0, SL2312_PCI_MEM1_BASE_SIZE, 4, temp); -+} -+ -+/* -+ * No swizzle on SL2312 -+ */ -+static u8 __init sl2312_pci_swizzle(struct pci_dev *dev, u8 *pinp) -+{ -+ return PCI_SLOT(dev->devfn); -+} -+ -+/* -+ * map the specified device/slot/pin to an IRQ. This works out such -+ * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. -+ */ -+static int __init sl2312_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ int intnr = ((slot + (pin - 1)) & 3) + 4; /* the IRQ number of PCI bridge */ -+ -+ // printk("%s : slot = %d pin = %d \n",__func__,slot,pin); -+ switch (slot) -+ { -+ case 12: -+ if (pin==1) -+ { -+ intnr = 3; -+ } -+ else -+ { -+ intnr = 0; -+ } -+ break; -+ case 11: -+ intnr = (2 + (pin - 1)) & 3; -+ break; -+ case 10: -+ intnr = (1 + (pin - 1)) & 3; -+ break; -+ case 9: -+ intnr = (pin - 1) & 3; -+ break; -+ } -+// if (slot == 10) -+// intnr = (1 + (pin - 1)) & 3; -+// else if (slot == 9) -+// intnr = (pin - 1) & 3; -+ return (IRQ_PCI_INTA + intnr); -+} -+ -+struct pci_bus * __init sl2312_pci_scan_bus(int nr, struct pci_sys_data *sysdata) -+{ -+ return (pci_scan_bus(0, &sl2312_pci_ops, sysdata)); -+ -+} -+ -+int __init sl2312_pci_setup(int nr, struct pci_sys_data *sys) -+{ -+ int ret = 0; -+ -+ if (nr == 0) { -+ ret = sl2312_pci_setup_resources(sys->resource); -+ } -+ -+ return ret; -+} -+ -+ -+struct hw_pci sl2312_pci __initdata = { -+ .setup = sl2312_pci_setup, -+ .preinit = sl2312_pci_preinit, -+ .nr_controllers = 1, -+ .swizzle = sl2312_pci_swizzle, -+ .map_irq = sl2312_pci_map_irq, -+ .scan = sl2312_pci_scan_bus, -+}; -+ -+static int __init sl2312_pci_init(void) -+{ -+ if (machine_is_sl2312()) -+ pci_common_init(&sl2312_pci); -+ return 0; -+} -+ -+subsys_initcall(sl2312_pci_init); ---- /dev/null -+++ b/arch/arm/mach-sl2312/sl2312-otg-1.c -@@ -0,0 +1,64 @@ -+/* -+ * linux/arch/arm/mach-pxa/sl2312.c -+ * -+ * Author: Nicolas Pitre -+ * Created: Nov 05, 2002 -+ * Copyright: MontaVista Software Inc. -+ * -+ * Code specific to sl2312 aka Bulverde. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include "asm/arch/sl2312.h" -+#include "asm/arch/irqs.h" -+#include -+#include -+#include -+ -+/* -+ * device registration specific to sl2312. -+ */ -+ -+static u64 sl2312_dmamask_1 = 0xffffffffUL; -+ -+static struct resource sl2312_otg_resources_1[] = { -+ [0] = { -+ .start = 0x69000000, -+ .end = 0x69000fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_USB1, -+ .end = IRQ_USB1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device ehci_1_device = { -+ .name = "ehci-hcd-FOTG2XX", -+ .id = -1, -+ .dev = { -+ .dma_mask = &sl2312_dmamask_1, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1), -+ .resource = sl2312_otg_resources_1, -+}; -+ -+static struct platform_device *devices[] __initdata = { -+ &ehci_1_device, -+}; -+ -+static int __init sl2312_1_init(void) -+{ -+ return platform_add_devices(devices, ARRAY_SIZE(devices)); -+} -+ -+subsys_initcall(sl2312_1_init); ---- /dev/null -+++ b/arch/arm/mach-sl2312/sl2312-otg.c -@@ -0,0 +1,87 @@ -+/* -+ * linux/arch/arm/mach-pxa/sl2312.c -+ * -+ * Author: Nicolas Pitre -+ * Created: Nov 05, 2002 -+ * Copyright: MontaVista Software Inc. -+ * -+ * Code specific to sl2312 aka Bulverde. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include "asm/arch/sl2312.h" -+#include "asm/arch/irqs.h" -+#include -+#include -+#include -+ -+/* -+ * device registration specific to sl2312. -+ */ -+ -+static u64 sl2312_dmamask = 0xffffffffUL; -+ -+static struct resource sl2312_otg_resources_1[] = { -+ [0] = { -+ .start = 0x68000000, -+ .end = 0x68000fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_USB0, -+ .end = IRQ_USB0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+static struct resource sl2312_otg_resources_2[] = { -+ [2] = { -+ .start = 0x69000000, -+ .end = 0x69000fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ [3] = { -+ .start = IRQ_USB1, -+ .end = IRQ_USB1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device ehci_device_1 = { -+ .name = "ehci-hcd-FOTG2XX", -+ .id = 1, -+ .dev = { -+ .dma_mask = &sl2312_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1), -+ .resource = sl2312_otg_resources_1, -+}; -+ -+static struct platform_device ehci_device_2 = { -+ .name = "ehci-hcd-FOTG2XX", -+ .id = 2, -+ .dev = { -+ .dma_mask = &sl2312_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .num_resources = ARRAY_SIZE(sl2312_otg_resources_2), -+ .resource = sl2312_otg_resources_2, -+}; -+ -+static struct platform_device *devices[] __initdata = { -+ &ehci_device_1, /* &ehci_device_2, */ -+}; -+ -+static int __init sl2312_init(void) -+{ -+ return platform_add_devices(devices, ARRAY_SIZE(devices)); -+} -+ -+subsys_initcall(sl2312_init); ---- /dev/null -+++ b/arch/arm/mach-sl2312/sl3516_device.c -@@ -0,0 +1,89 @@ -+/* -+ * linux/arch/arm/mach-2312/sl3516_device.c -+ * -+ * Author: Nicolas Pitre -+ * Created: Nov 05, 2002 -+ * Copyright: MontaVista Software Inc. -+ * -+ * Code specific to sl2312 aka Bulverde. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include "asm/arch/sl2312.h" -+#include "asm/arch/irqs.h" -+#include -+#include -+ -+/* -+ * device registration specific to sl2312. -+ */ -+ -+static u64 sl3516_dmamask = 0xffffffffUL; -+ -+static struct resource sl3516_sata_resources[] = { -+ [0] = { -+ .start = 0x63400000, -+ .end = 0x63400040, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_IDE1, -+ .end = IRQ_IDE1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device sata_device = { -+ .name = "lepus-sata", -+ .id = -1, -+ .dev = { -+ .dma_mask = &sl3516_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .num_resources = ARRAY_SIZE(sl3516_sata_resources), -+ .resource = sl3516_sata_resources, -+}; -+ -+static struct resource sl3516_sata0_resources[] = { -+ [0] = { -+ .start = 0x63000000, -+ .end = 0x63000040, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_IDE0, -+ .end = IRQ_IDE0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device sata0_device = { -+ .name = "lepus-sata0", -+ .id = -1, -+ .dev = { -+ .dma_mask = &sl3516_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .num_resources = ARRAY_SIZE(sl3516_sata0_resources), -+ .resource = sl3516_sata0_resources, -+}; -+ -+static struct platform_device *sata_devices[] __initdata = { -+ &sata_device, -+ &sata0_device, -+}; -+ -+static int __init sl3516_init(void) -+{ -+ return platform_add_devices(sata_devices, ARRAY_SIZE(sata_devices)); -+} -+ -+subsys_initcall(sl3516_init); ---- /dev/null -+++ b/arch/arm/mach-sl2312/time.c -@@ -0,0 +1,134 @@ -+/* -+ * linux/include/asm-arm/arch-epxa10db/time.h -+ * -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#define TIMER_TYPE (volatile unsigned int*) -+#include -+// #define FIQ_PLUS 1 -+ -+ -+/* -+ * IRQ handler for the timer -+ */ -+static irqreturn_t sl2312_timer_interrupt(int irq, void *dev_id) -+{ -+// unsigned int led; -+ // ...clear the interrupt -+#ifdef FIQ_PLUS -+ *((volatile unsigned int *)FIQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK); -+#else -+ *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK); -+#endif -+ -+#if 0 -+ if(!(jiffies % HZ)) -+ { -+ led = jiffies / HZ; -+// printk("ticks %x \n", led); -+ } -+ do_leds(); -+ do_timer(regs); -+ do_profile(regs); -+#endif -+ timer_tick(); -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction sl2312_timer_irq = { -+ .name = "SL2312 Timer Tick", -+ .flags = IRQF_DISABLED | IRQF_TIMER, -+ .handler = sl2312_timer_interrupt, -+}; -+ -+unsigned long sl2312_gettimeoffset (void) -+{ -+ return 0L; -+} -+ -+/* -+ * Set up timer interrupt, and return the current time in seconds. -+ */ -+void __init sl2312_time_init(void) -+{ -+ // For clock rate adjusting -+ unsigned int tick_rate=0; -+ -+#ifdef CONFIG_SL3516_ASIC -+ unsigned int clock_rate_base = 130000000; -+ unsigned int reg_v=0; -+ -+ //--> Add by jason for clock adjust -+ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_STATUS))); -+ reg_v >>= 15; -+ tick_rate = (clock_rate_base + (reg_v & 0x07)*10000000); -+ -+ // FPGA use AHB bus tick rate -+ printk("Bus: %dMHz",tick_rate/1000000); -+ -+ tick_rate /= 6; // APB bus run AHB*(1/6) -+ -+ switch((reg_v>>3)&3){ -+ case 0: printk("(1/1)\n") ; -+ break; -+ case 1: printk("(3/2)\n") ; -+ break; -+ case 2: printk("(24/13)\n") ; -+ break; -+ case 3: printk("(2/1)\n") ; -+ break; -+ } -+ //<-- -+#else -+ printk("Bus: %dMHz(1/1)\n",CLOCK_TICK_RATE/1000000); // FPGA use 20MHz -+ tick_rate = CLOCK_TICK_RATE; -+#endif -+ -+ -+ /* -+ * Make irqs happen for the system timer -+ */ -+ // initialize timer interrupt -+ // low active and edge trigger -+#ifdef FIQ_PLUS -+ *((volatile unsigned int *)FIQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK); -+ *((volatile unsigned int *)FIQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK); -+ setup_irq(IRQ_TIMER1, &sl2312_timer_irq); -+ /* Start the timer */ -+ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ); -+ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ); -+ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_1_CR_ENABLE_MSK|TIMER_1_CR_INT_MSK); -+#else -+ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK); -+ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK); -+ setup_irq(IRQ_TIMER2, &sl2312_timer_irq); -+ /* Start the timer */ -+ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ); -+ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ); -+ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_2_CR_ENABLE_MSK|TIMER_2_CR_INT_MSK); -+#endif -+ -+} -+ -+ ---- /dev/null -+++ b/arch/arm/mach-sl2312/xor.c -@@ -0,0 +1,1200 @@ -+/* -+ * arch/arm/mach-sl2312/xor.c -+ * -+ * Support functions for the Gemini Soc. This is -+ * a HW XOR unit that is specifically designed for use with RAID5 -+ * applications. This driver provides an interface that is used by -+ * the Linux RAID stack. -+ * -+ * Original Author: Jason Lee -+ * -+ * Contributors:Sanders -+ Jason Lee -+ * -+ * -+ * Maintainer: Jason Lee -+ * -+ * Copyright (C) 2005 Storlink Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * -+ * History: (06/25/2005, DJ) Initial Creation -+ * -+ * Versing 1.0.0 Initial version -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * pick up local definitions -+ */ -+#define XOR_SW_FILL_IN -+#include "hw_xor.h" -+ -+ -+//#define XOR_DEBUG -+//#define XOR_TEST 1 -+#ifdef XOR_TEST -+#define TEST_ITERATION 1000 -+#define SPIN_WAIT 1 -+#endif -+#ifdef XOR_DEBUG -+#define DPRINTK(s, args...) printk("Gemini XOR: " s "\n", ## args) -+#define DENTER() DPRINTK("Entered...\n"); -+#define DEXIT() DPRINTK("Exited...\n"); -+#else -+#define DPRINTK(s, args...) -+#define DENTER() -+#define DEXIT() -+#endif -+ -+//#define SPIN_WAIT -+ -+/* globals */ -+static RAID_T tp; -+static RAID_TXDMA_CTRL_T txdma_ctrl; -+RAID_RXDMA_CTRL_T rxdma_ctrl; -+ -+//#ifndef SPIN_WAIT -+static spinlock_t raid_lock; -+//#endif -+ -+static unsigned int tx_desc_virtual_base; -+static unsigned int rx_desc_virtual_base; -+RAID_DESCRIPTOR_T *tx_desc_ptr; -+RAID_DESCRIPTOR_T *rx_desc_ptr; -+ -+/* static prototypes */ -+#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle) -+#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle) -+ -+static int gemini_xor_init_desc(void); -+ -+static unsigned int raid_read_reg(unsigned int offset) -+{ -+ unsigned int reg_val; -+ -+ reg_val = readl(RAID_BASE_ADDR + offset); -+ return (reg_val); -+} -+ -+static void raid_write_reg(unsigned int offset,unsigned int data,unsigned int bit_mask) -+{ -+ unsigned int reg_val; -+ unsigned int *addr; -+ -+ reg_val = ( raid_read_reg(offset) & (~bit_mask) ) | (data & bit_mask); -+ addr = (unsigned int *)(RAID_BASE_ADDR + offset); -+ writel(reg_val,addr); -+ return; -+} -+ -+#ifndef SPIN_WAIT -+__inline__ void xor_queue_descriptor(void) -+{ -+ unsigned int flags,status=1; -+ -+ DPRINTK("Going to sleep"); -+ -+ while(status){ -+ yield(); -+ //schedule(); -+ spin_lock_irqsave(&raid_lock,flags); -+ status = tp.busy; -+ spin_unlock_irqrestore(&raid_lock, flags); -+ } -+// tp.status = COMPLETE; -+ DPRINTK("woken up!"); -+ -+} -+#endif -+ -+#ifdef SPIN_WAIT -+static void gemini_xor_isr(int d_n) -+#else -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) -+static void gemini_xor_isr(int irq, void *dev_id, struct pt_regs *regs) -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+static irqreturn_t gemini_xor_isr(int irq, void *dev_instance, struct pt_regs *regs) -+#endif -+#endif -+{ -+ -+ unsigned int err; -+ RAID_DMA_STATUS_T dma_status; -+// RAID_DESCRIPTOR_T *rdesc,*tdesc; -+// unsigned int *paddr; -+ -+ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); -+#ifdef SPIN_WAIT -+ while( (dma_status.bits32& (1<<31) ) ==0 ){ -+ udelay(1); -+ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); -+ } -+ -+/* tdesc = tp.tx_first_desc; -+ rdesc = tp.rx_first_desc; -+ for(d_n;d_n>0;d_n--){ -+ if( tdesc->func_ctrl.bits.own == DMA ){ -+ paddr = tdesc; -+ printk("error tx desc:0x%x\n",*paddr++); -+ printk("error tx desc:0x%x\n",*paddr++); -+ printk("error tx desc:0s%x\n",*paddr++); -+ printk("error tx desc:0x%x\n",*paddr); -+ while(1); -+ } -+ tdesc = (RAID_DESCRIPTOR_T *)((tdesc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ } -+ -+ if( rdesc->func_ctrl.bits.own == DMA ){ -+ paddr = rdesc; -+ printk("error rx desc:0x%x\n",*paddr++); -+ printk("error rx desc:0x%x\n",*paddr++); -+ printk("error rx desc:0s%x\n",*paddr++); -+ printk("error rx desc:0x%x\n",*paddr); -+ while(1); -+ } -+*/ -+#endif -+ -+ if(dma_status.bits32 & ((1<<31)|(1<<26))){ -+ // if no bug , we can turn off rx finish interrupt -+ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); -+ err = raid_read_reg(RAID_DMA_DEVICE_ID); -+ tp.busy = 0; -+ -+ if(err&0x00FF0000){ -+ tp.status = ERROR; -+ printk("XOR:%s error code %x\n",(err&0x00F00000)?"tx":"rx",err); -+ -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) -+ return ; -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+#ifndef SPIN_WAIT -+ return IRQ_RETVAL(IRQ_HANDLED); -+#endif -+#endif -+ } -+ // 16~19 rx error code -+ // 20~23 tx error codd -+ -+ dma_status.bits.tsFinishI = 1; -+ dma_status.bits.rsFinishI = 1; -+ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0x84000000); // clear INT -+ -+// printk("xor %d\n",d_n); -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) -+ return ; -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+#ifndef SPIN_WAIT -+ return IRQ_RETVAL(IRQ_HANDLED); -+#endif -+#endif -+ } -+ -+ #if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) -+ return ; -+ #elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ #ifndef SPIN_WAIT -+ printk("XOR: DMA status register(0x%8x)\n",dma_status.bits32); -+ return IRQ_RETVAL(IRQ_HANDLED); -+ #endif -+ #endif -+} -+ -+void -+xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) -+{ -+ int status=0; -+ unsigned int flags; -+ -+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ -+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); -+ } -+ -+ spin_lock_irqsave(&raid_lock,flags); -+ while(tp.status != COMPLETE){ -+ spin_unlock_irqrestore(&raid_lock, flags); -+ //printk("XOR yield2\n"); -+#ifdef XOR_SW_FILL_IN -+ xor_arm4regs_2(bytes,p1,p2); -+ return ; -+#else -+ yield(); -+#endif -+ } -+ spin_unlock_irqrestore(&raid_lock, flags); -+ tp.status = RUNNING; -+ -+ // flush the cache to memory before H/W XOR touches them -+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); -+ consistent_sync(p2, bytes, DMA_TO_DEVICE); -+ -+ -+ tp.tx_desc = tp.tx_first_desc; -+ tp.rx_desc = tp.rx_first_desc; -+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ -+ // prepare tx descript -+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00020000; -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ wmb(); -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00010000; -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript -+ -+ wmb(); -+ // prepare rx descript -+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf); -+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); -+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR -+// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ -+ } -+ else{ -+ /* no free tx descriptor */ -+ printk("XOR:no free tx descript"); -+ return ; -+ } -+ -+ // change status -+// tp.status = RUNNING; -+ status = tp.busy = 1; -+ -+ // start tx DMA -+ rxdma_ctrl.bits.rd_start = 1; -+ // start rx DMA -+ txdma_ctrl.bits.td_start = 1; -+ -+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); -+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); -+ -+#ifdef SPIN_WAIT -+ gemini_xor_isr(2); -+#else -+ xor_queue_descriptor(); -+#endif -+ -+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*2) ; -+ tp.status = COMPLETE; -+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; -+// tp.rx_desc = tp.rx_first_desc ; -+// tp.rx_desc->func_ctrl.bits.own = DMA; -+ -+} -+ -+void -+xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, -+ unsigned long *p3) -+{ -+ int status=0; -+ unsigned int flags; -+ -+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ -+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); -+ } -+ -+ spin_lock_irqsave(&raid_lock,flags); -+ if(tp.status != COMPLETE){ -+ spin_unlock_irqrestore(&raid_lock, flags); -+ //printk("XOR yield3\n"); -+#ifdef XOR_SW_FILL_IN -+ xor_arm4regs_3(bytes,p1,p2,p3); -+ return; -+#else -+ yield(); -+#endif -+ } -+ spin_unlock_irqrestore(&raid_lock, flags); -+ tp.status = RUNNING; -+ -+ // flush the cache to memory before H/W XOR touches them -+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); -+ consistent_sync(p2, bytes, DMA_TO_DEVICE); -+ consistent_sync(p3, bytes, DMA_TO_DEVICE); -+ -+ tp.tx_desc = tp.tx_first_desc; -+ tp.rx_desc = tp.rx_first_desc; -+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ -+ // prepare tx descript -+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00020000; -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x0000000; -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00010000; -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript -+ -+ // prepare rx descript -+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf); -+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); -+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR -+// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ -+ } -+ else{ -+ /* no free tx descriptor */ -+ printk("XOR:no free tx descript \n"); -+ return ; -+ } -+ -+ // change status -+// tp.status = RUNNING; -+ status = tp.busy = 1; -+ -+ // start tx DMA -+ rxdma_ctrl.bits.rd_start = 1; -+ // start rx DMA -+ txdma_ctrl.bits.td_start = 1; -+ wmb(); -+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); -+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); -+ -+#ifdef SPIN_WAIT -+ gemini_xor_isr(3); -+#else -+ xor_queue_descriptor(); -+#endif -+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*3) | 0x0B; -+ tp.status = COMPLETE; -+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B; -+ //tp.rx_desc = tp.rx_first_desc ; -+// tp.rx_desc->func_ctrl.bits.own = DMA; -+ -+} -+ -+void -+xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, -+ unsigned long *p3, unsigned long *p4) -+{ -+ int status=0; -+ unsigned int flags; -+ -+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ -+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); -+ } -+ -+ spin_lock_irqsave(&raid_lock,flags); -+ if(tp.status != COMPLETE){ -+ spin_unlock_irqrestore(&raid_lock, flags); -+ //printk("S\n"); -+#ifdef XOR_SW_FILL_IN -+ xor_arm4regs_4(bytes,p1,p2,p3,p4); -+ return; -+#else -+ msleep(1); -+ yield(); -+#endif -+ } -+ spin_unlock_irqrestore(&raid_lock, flags); -+ -+ tp.status = RUNNING; -+ -+ // flush the cache to memory before H/W XOR touches them -+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); -+ consistent_sync(p2, bytes, DMA_TO_DEVICE); -+ consistent_sync(p3, bytes, DMA_TO_DEVICE); -+ consistent_sync(p4, bytes, DMA_TO_DEVICE); -+ -+ tp.tx_desc = tp.tx_first_desc; -+ tp.rx_desc = tp.rx_first_desc; -+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ -+ // prepare tx descript -+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00020000; -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_cur_desc->buf_addr = (unsigned int)__pa(p2); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00000000; -+ tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00000000; -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ -+ -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00010000; -+// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript -+ -+ // prepare rx descript -+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); -+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); -+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR -+// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ -+ } -+ else{ -+ /* no free tx descriptor */ -+ printk("XOR:no free tx descript"); -+ return ; -+ } -+ -+ // change status -+// tp.status = RUNNING; -+ status = tp.busy = 1; -+ -+ // start tx DMA -+ rxdma_ctrl.bits.rd_start = 1; -+ // start rx DMA -+ txdma_ctrl.bits.td_start = 1; -+ wmb(); -+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); -+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); -+ -+#ifdef SPIN_WAIT -+ gemini_xor_isr(4); -+#else -+ xor_queue_descriptor(); -+#endif -+ -+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*4) | 0x0B; -+ tp.status = COMPLETE; -+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B; -+ //tp.rx_desc = tp.rx_first_desc ; -+// tp.rx_desc->func_ctrl.bits.own = DMA; -+ -+} -+ -+void -+xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, -+ unsigned long *p3, unsigned long *p4, unsigned long *p5) -+{ -+ -+ int status=0; -+ unsigned int flags; -+ -+ -+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ -+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); -+ } -+ -+ spin_lock_irqsave(&raid_lock,flags); -+ while(tp.status != COMPLETE){ -+ spin_unlock_irqrestore(&raid_lock, flags); -+ //printk("XOR yield5\n"); -+#ifdef XOR_SW_FILL_IN -+ xor_arm4regs_5(bytes,p1,p2,p3,p4,p5); -+ return; -+#else -+ msleep(1); -+ yield(); -+#endif -+ } -+ spin_unlock_irqrestore(&raid_lock, flags); -+ tp.status = RUNNING; -+ -+ // flush the cache to memory before H/W XOR touches them -+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); -+ consistent_sync(p2, bytes, DMA_TO_DEVICE); -+ consistent_sync(p3, bytes, DMA_TO_DEVICE); -+ consistent_sync(p4, bytes, DMA_TO_DEVICE); -+ consistent_sync(p5, bytes, DMA_TO_DEVICE); -+ -+ tp.tx_desc = tp.tx_first_desc; -+ tp.rx_desc = tp.rx_first_desc; -+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ -+ // prepare tx descript -+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00020000; -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ wmb(); -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00000000; -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ wmb(); -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00000000; -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ wmb(); -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+ tp.tx_desc->flg_status.bits32 = 0x00000000; -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ wmb(); -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ -+ -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p5); // pysical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript -+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command -+// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->flg_status.bits32 = 0x00010000; -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); -+ tp.tx_finished_desc = tp.tx_desc; // keep last descript -+ -+ // prepare rx descript -+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); -+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); -+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR -+// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ -+ } -+ else{ -+ /* no free tx descriptor */ -+ printk("XOR:no free tx descript"); -+ return ; -+ } -+ -+ // change status -+// tp.status = RUNNING; -+ status = tp.busy = 1; -+ -+ // start tx DMA -+ rxdma_ctrl.bits.rd_start = 1; -+ // start rx DMA -+ txdma_ctrl.bits.td_start = 1; -+ wmb(); -+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); -+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); -+ -+#ifdef SPIN_WAIT -+ gemini_xor_isr(5); -+#else -+ xor_queue_descriptor(); -+#endif -+ -+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*5) | 0x0B; -+ tp.status = COMPLETE; -+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B; -+ //tp.rx_desc = tp.rx_first_desc ; -+// tp.rx_desc->func_ctrl.bits.own = DMA; -+ -+} -+ -+#ifdef XOR_TEST -+void -+raid_memset(unsigned int *p1, unsigned int pattern, unsigned int bytes) -+{ -+ int status=0,i; -+ -+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ -+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); -+ } -+ -+ *p1 = pattern; -+ -+ // flush the cache to memory before H/W XOR touches them -+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); -+ -+ while(tp.status != COMPLETE){ -+ DPRINTK("XOR yield\n"); -+ //schedule(); -+ yield(); -+ } -+ tp.status = RUNNING; -+ -+ tp.tx_desc = tp.tx_first_desc; -+ tp.rx_desc = tp.rx_first_desc; -+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ -+ // prepare tx descript -+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF); -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = 4; /* total frame byte count */ -+ tp.tx_desc->flg_status.bits_cmd_status.bcc = bytes; // bytes to fill -+ tp.tx_desc->flg_status.bits_cmd_status.mode = CMD_FILL; // only support memory FILL command -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b; -+// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base); -+ -+ // prepare rx descript -+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); -+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); -+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR -+ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base); -+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ tp.rx_finished_desc = tp.rx_desc; -+ -+ } -+ else{ -+ /* no free tx descriptor */ -+ printk("XOR:no free tx descript"); -+ return ; -+ } -+ -+ // change status -+ //tp.status = RUNNING; -+ status = tp.busy = 1; -+ -+ // start tx DMA -+ rxdma_ctrl.bits.rd_start = 1; -+ // start rx DMA -+ txdma_ctrl.bits.td_start = 1; -+ -+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); -+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); -+ -+#ifdef SPIN_WAIT -+ gemini_xor_isr(2); -+#else -+ xor_queue_descriptor(); -+#endif -+ -+ for(i=1; i<(bytes/sizeof(int)); i++) { -+ if(p1[0]!=p1[i]){ -+ printk("pattern set error!\n"); -+ while(1); -+ } -+ } -+ -+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; -+ tp.status = COMPLETE; -+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; -+ //tp.rx_desc = tp.rx_first_desc ; -+// tp.rx_desc->func_ctrl.bits.own = DMA; -+ -+} -+#endif -+ -+void -+raid_memcpy(unsigned int *to, unsigned int *from, unsigned int bytes) -+{ -+ int status=0,i; -+ -+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ -+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); -+ } -+ -+ // flush the cache to memory before H/W XOR touches them -+ consistent_sync(to, bytes, DMA_BIDIRECTIONAL); -+ consistent_sync(from,bytes, DMA_TO_DEVICE); -+ -+ while(tp.status != COMPLETE){ -+ DPRINTK("XOR yield\n"); -+ //schedule(); -+ yield(); -+ } -+ tp.status = RUNNING; -+ -+ tp.tx_desc = tp.tx_first_desc; -+ tp.rx_desc = tp.rx_first_desc; -+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ -+ // prepare tx descript -+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF); -+ tp.tx_desc->buf_addr = (unsigned int)__pa(from); // physical address -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+ tp.tx_desc->flg_status.bits32 = CMD_CPY; // only support memory FILL command -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b; -+// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base); -+ -+ // prepare rx descript -+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); -+ tp.rx_desc->buf_addr = (unsigned int)__pa(to); -+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ -+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR -+ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base); -+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript -+ -+ } -+ else{ -+ /* no free tx descriptor */ -+ printk("XOR:no free tx descript"); -+ return ; -+ } -+ -+ // change status -+ //tp.status = RUNNING; -+ status = tp.busy = 1; -+ -+ // start tx DMA -+ rxdma_ctrl.bits.rd_start = 1; -+ // start rx DMA -+ txdma_ctrl.bits.td_start = 1; -+ -+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); -+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); -+ -+#ifdef SPIN_WAIT -+ gemini_xor_isr(2); -+#else -+ xor_queue_descriptor(); -+#endif -+ -+#ifdef XOR_TEST -+ for(i=1; i<(bytes/sizeof(int)); i++) { -+ if(to[i]!=from[i]){ -+ printk("pattern check error!\n"); -+ printk("offset=0x%x p1=%x p2=%x\n",i*4,to[i],from[i]); -+ while(1); -+ } -+ } -+#endif -+ -+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; -+ tp.status = COMPLETE; -+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; -+ //tp.rx_desc = tp.rx_first_desc ; -+// tp.rx_desc->func_ctrl.bits.own = DMA; -+ -+} -+EXPORT_SYMBOL(raid_memcpy); -+ -+#ifdef XOR_TEST -+int -+raid_memchk(unsigned int *p1, unsigned int pattern, unsigned int bytes) -+{ -+ int status=0; -+ RAID_DMA_STATUS_T dma_status; -+ -+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ -+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); -+ } -+ -+ status = ((pattern&0xFFFF)%bytes )/4; -+ p1[status] = pattern; -+ -+ while(tp.status != COMPLETE){ -+ DPRINTK("XOR yield\n"); -+ //schedule(); -+ yield(); -+ } -+ tp.status = RUNNING; -+ -+ // flush the cache to memory before H/W XOR touches them -+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); -+ -+ tp.tx_desc = tp.tx_first_desc; -+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ -+ // prepare tx descript -+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF); -+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address -+ tp.tx_desc->func_ctrl.bits.raid_ctrl_status = 0; -+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes ; /* total frame byte count */ -+ tp.tx_desc->flg_status.bits32 = CMD_CHK; // only support memory FILL command -+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ -+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b; -+// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base); -+ -+ } -+ else{ -+ /* no free tx descriptor */ -+ printk("XOR:no free tx descript"); -+ return -1; -+ } -+ -+ // change status -+ //tp.status = RUNNING; -+ status = tp.busy = 1; -+ -+ // start tx DMA -+ txdma_ctrl.bits.td_start = 1; -+ -+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); -+// raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); -+ -+#ifdef SPIN_WAIT -+ gemini_xor_isr(2); -+#else -+ xor_queue_descriptor(); -+#endif -+ -+// dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); -+// if (dma_status.bits32 & (1<<15)) { -+ -+ if((tp.tx_first_desc->func_ctrl.bits.raid_ctrl_status & 0x2)) { -+ status = 1; -+// raid_write_reg(RAID_DMA_STATUS,0x00008000,0x00080000); -+ } -+ else{ -+ status = 0; -+ } -+ -+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; -+ tp.status = COMPLETE; -+// tp.rx_desc->func_ctrl.bits.own = DMA; -+ return status ; -+} -+#endif -+ -+int __init gemini_xor_init(void) -+{ -+ unsigned int res; -+ unsigned int *paddr1,*paddr2,*paddr3,i; -+ unsigned volatile char *charact; -+ unsigned volatile short *two_char; -+ unsigned volatile int *four_char; -+ -+ // init descript -+ res = gemini_xor_init_desc(); -+ if(res) { -+ printk("Init RAID Descript Fail!!\n"); -+ return -res; -+ } -+ -+ tp.device_name = "Gemini XOR Acceleration"; -+ -+ // request irq -+#ifndef SPIN_WAIT -+ res = request_irq(IRQ_RAID, gemini_xor_isr, SA_INTERRUPT, tp.device_name, NULL); -+#endif -+ if(res){ -+ printk(KERN_ERR "%s: unable to request IRQ %d for " -+ "HW XOR %d\n", tp.device_name, IRQ_RAID, res); -+ return -EBUSY; -+ } -+ -+#ifdef XOR_TEST -+ -+RETEST: -+ paddr1 = kmalloc(0x1000,GFP_KERNEL); -+ paddr2 = kmalloc(0x1000,GFP_KERNEL); -+ paddr3 = kmalloc(0x1000,GFP_KERNEL); -+ for(i=0;ifunc_ctrl.bits.own = CPU; -+ tp.tx_desc->func_ctrl.bits.buffer_size = 0; -+ tp.tx_desc_dma = tp.tx_desc_dma + sizeof(RAID_DESCRIPTOR_T); -+// tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tp.tx_desc_dma | 0x0B; -+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned int)tx_first_desc_dma | 0x0B) + i*0x10; -+ tp.tx_desc = &tp.tx_desc[1]; -+ } -+ tp.tx_desc->func_ctrl.bits.own = DMA; -+ tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tx_first_desc_dma|0x0b; -+ tp.tx_desc = tp.tx_cur_desc; -+ tp.tx_desc_dma = (unsigned int*)tx_first_desc_dma; -+ tp.tx_first_desc = tp.tx_desc ; -+ -+ tp.rx_cur_desc = tp.rx_desc; /* virtual address */ -+ tp.rx_finished_desc = tp.rx_desc; /* virtual address */ -+ rx_first_desc_dma = (dma_addr_t)tp.rx_desc_dma; /* physical address */ -+ for (i = 1; i < RX_DESC_NUM; i++) { -+ tp.rx_desc->func_ctrl.bits.own = DMA; -+ tp.rx_desc->func_ctrl.bits.buffer_size = 0; -+ tp.rx_desc_dma = tp.rx_desc_dma + sizeof(RAID_DESCRIPTOR_T); -+// tp.rx_desc->next_desc_addr.bits32 = (unsigned int)tp.rx_desc_dma | 0x0B; -+ tp.rx_desc->next_desc_addr.bits32 = ((unsigned int)rx_first_desc_dma | 0x0B) + i*0x10; -+ tp.rx_desc = &tp.rx_desc[1]; -+ } -+ tp.rx_desc->func_ctrl.bits.own = DMA; -+ tp.rx_desc->next_desc_addr.bits32 = rx_first_desc_dma|0x0b; -+ tp.rx_desc = tp.rx_cur_desc; -+ tp.rx_desc_dma = (unsigned int*)rx_first_desc_dma; -+ tp.rx_first_desc = tp.rx_desc ; -+ tp.busy = 0; -+ tp.status = COMPLETE; -+ -+ // Partition SRAM size -+ raid_write_reg(RAID_PCR, SRAM_PAR_SIZE,0x00000003); -+ -+ // config tx DMA controler -+ txdma_ctrl.bits32 = 0; -+ txdma_ctrl.bits.td_start = 0; -+ txdma_ctrl.bits.td_continue = 1; -+ txdma_ctrl.bits.td_chain_mode = 1; -+ txdma_ctrl.bits.td_prot = 0; -+ txdma_ctrl.bits.td_burst_size = 1; -+ txdma_ctrl.bits.td_bus = 3; -+ txdma_ctrl.bits.td_endian = 0; -+ txdma_ctrl.bits.td_finish_en = 1; -+ txdma_ctrl.bits.td_fail_en = 1; -+ txdma_ctrl.bits.td_perr_en = 1; -+ txdma_ctrl.bits.td_eod_en = 0; // enable tx descript -+ txdma_ctrl.bits.td_eof_en = 0; -+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0xFFFFFFFF); -+ -+ // config rx DMA controler -+ rxdma_ctrl.bits32 = 0; -+ rxdma_ctrl.bits.rd_start = 0; -+ rxdma_ctrl.bits.rd_continue = 1; -+ rxdma_ctrl.bits.rd_chain_mode = 1; -+ rxdma_ctrl.bits.rd_prot = 0; -+ rxdma_ctrl.bits.rd_burst_size = 1; -+ rxdma_ctrl.bits.rd_bus = 3; -+ rxdma_ctrl.bits.rd_endian = 0; -+ rxdma_ctrl.bits.rd_finish_en = 0; -+ rxdma_ctrl.bits.rd_fail_en = 1; -+ rxdma_ctrl.bits.rd_perr_en = 1; -+ rxdma_ctrl.bits.rd_eod_en = 0; -+ rxdma_ctrl.bits.rd_eof_en = 0; -+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0xFFFFFFFF); -+ -+ // enable interrupt -+ dma_status.bits32 = 3; // enable RpInt -+ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0xFFFFFFFF); -+ -+ return 0; -+} -+ -+module_init(gemini_xor_init); -+module_exit(gemini_xor_exit); -+ ---- a/arch/arm/mm/Kconfig -+++ b/arch/arm/mm/Kconfig -@@ -187,6 +187,26 @@ config CPU_ARM926T - Say Y if you want support for the ARM926T processor. - Otherwise, say N. - -+###### for Storlink SoC ###### -+config CPU_FA526 -+ bool "FA526 processor" -+ depends on ARCH_SL2312 -+ default y -+ select CPU_32v4 -+ select CPU_ABRT_EV4 -+ select CPU_CACHE_FA -+ select CPU_CACHE_VIVT -+ select CPU_CP15_MMU -+ select CPU_COPY_FA -+ select CPU_TLB_FA -+ select CPU_FA_BTB -+ help -+ The FA526 is a version of the ARM9 compatible processor, but with smaller -+ instruction and data caches. It is used in Storlink Sword device family. -+ -+ Say Y if you want support for the FA526 processor. -+ Otherwise, say N. -+ - # ARM940T - config CPU_ARM940T - bool "Support ARM940T processor" if ARCH_INTEGRATOR -@@ -461,6 +481,9 @@ config CPU_CACHE_VIVT - config CPU_CACHE_VIPT - bool - -+config CPU_CACHE_FA -+ bool -+ - if MMU - # The copy-page model - config CPU_COPY_V3 -@@ -475,6 +498,12 @@ config CPU_COPY_V4WB - config CPU_COPY_V6 - bool - -+config CPU_COPY_FA -+ bool -+ -+config CPU_FA_BTB -+ bool -+ - # This selects the TLB model - config CPU_TLB_V3 - bool -@@ -534,6 +563,14 @@ config CPU_CP15_MPU - config IO_36 - bool - -+config CPU_TLB_FA -+ bool -+ help -+ //TODO -+ Faraday ARM FA526 architecture, unified TLB with writeback cache -+ and invalidate instruction cache entry. Branch target buffer is also -+ supported. -+ - comment "Processor Features" - - config ARM_THUMB -@@ -600,7 +637,7 @@ config CPU_DCACHE_SIZE - - config CPU_DCACHE_WRITETHROUGH - bool "Force write through D-cache" -- depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE -+ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE - default y if CPU_ARM925T - help - Say Y here to use the data cache in writethrough mode. Unless you ---- a/arch/arm/mm/Makefile -+++ b/arch/arm/mm/Makefile -@@ -32,6 +32,7 @@ obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4 - obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o - obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o - obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o -+obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o - - obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o - obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o -@@ -40,6 +41,7 @@ obj-$(CONFIG_CPU_COPY_V6) += copypage-v6 - obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o - obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o - obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o -+obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o - - obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o - obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o -@@ -47,6 +49,7 @@ obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o - obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o - obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o - obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o -+obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o - - obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o - obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o -@@ -60,6 +63,7 @@ obj-$(CONFIG_CPU_ARM925T) += proc-arm925 - obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o - obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o - obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o -+obj-$(CONFIG_CPU_FA526) += proc-fa526.o - obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o - obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o - obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o ---- /dev/null -+++ b/arch/arm/mm/cache-fa.S -@@ -0,0 +1,400 @@ -+/* -+ * linux/arch/arm/mm/cache-fa.S -+ * -+ * Copyright (C) 2005 Faraday Corp. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Processors: FA520 FA526 FA626 -+ * 03/31/2005 : Luke Lee created, modified from cache-v4wb.S -+ * 04/06/2005 : 1. Read CR0-1 and determine the cache size dynamically, -+ * to suit all Faraday CPU series -+ * 2. Fixed all functions -+ * 04/08/2005 : insert CONFIG_CPU_ICACHE_DISABLE and CONFIG_CPU_DCACHE_DISABLE -+ * 04/12/2005 : TODO: make this processor dependent or a self-modifying code to -+ * inline cache len/size info into the instructions, as reading cache -+ * size and len info in memory could cause another cache miss. -+ * 05/05/2005 : Modify fa_flush_user_cache_range to comply APCS. -+ * 05/19/2005 : Adjust for boundary conditions. -+ */ -+#include -+#include -+#include -+#include -+#include "proc-macros.S" -+ -+#define CACHE_DLINESIZE 16 -+#ifdef CONFIG_SL3516_ASIC -+#define CACHE_DSIZE 8192 -+#else -+#define CACHE_DSIZE 16384 -+#endif -+#define CACHE_ILINESIZE 16 -+#define CACHE_ISIZE 16384 -+ -+/* Luke Lee 04/06/2005 ins begin */ -+/* -+ * initialize_cache_info() -+ * -+ * Automatic detection of DSIZE, DLEN, ISIZE, ILEN variables according to -+ * system register CR0-1 -+ * Destroyed register: r0, r1, r2, r3, ip -+ */ -+ .align -+ENTRY(fa_initialize_cache_info) -+ mov r3, #1 @ r3 always = 1 -+ adr ip, __fa_cache_ilen -+ -+ mrc p15, 0, r0, c0, c0, 1 -+ /* ILEN */ -+ and r1, r0, #3 @ bits [1:0] -+ add r1, r1, #3 @ cache line size is at least 8 bytes (2^3) -+ mov r2, r3, lsl r1 @ r2 = 1<= limit? -+ bhs __flush_whole_cache @ flush whole D cache -+ -+ //debug_Aaron -+ bic r0, r0, #CACHE_DLINESIZE-1 -+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry -+ bic r1, r1, #CACHE_DLINESIZE-1 -+ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry -+ -+ -+1: /* Luke Lee 04/06/2005 del 2 ins 5 */ -+ -+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH -+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry -+#else -+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry -+#endif -+ /* Luke Lee 04/06/2005 mod 1 */ -+ add r0, r0, #CACHE_DLINESIZE -+ cmp r0, r1 -+ bls 1b @ Luke Lee 05/19/2005 -+#endif /* CONFIG_CPU_DCACHE_DISABLE */ -+ -+#ifndef CONFIG_CPU_FA_WB_DISABLE -+ tst r2, #VM_EXEC -+ /* Luke Lee 04/06/2005 mod 1 tofix todo : ne->eq */ -+ mcreq p15, 0, r4, c7, c10, 4 @ drain write buffer -+#endif -+ -+ /* Luke Lee 04/06/2005 ins block */ -+#ifdef CONFIG_CPU_FA_BTB -+ tst r2, #VM_EXEC -+ mov ip, #0 -+ mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB -+ nop -+ nop -+#endif -+ mov pc, lr -+ -+/* -+ * flush_kern_dcache_page(void *page) -+ * -+ * Ensure no D cache aliasing occurs, either with itself or -+ * the I cache -+ * -+ * - addr - page aligned address -+ */ -+ENTRY(fa_flush_kern_dcache_page) -+ add r1, r0, #PAGE_SZ -+ /* fall through */ -+ -+/* -+ * coherent_kern_range(start, end) -+ * -+ * Ensure coherency between the Icache and the Dcache in the -+ * region described by start. If you have non-snooping -+ * Harvard caches, you need to implement this function. -+ * -+ * - start - virtual start address -+ * - end - virtual end address -+ */ -+ENTRY(fa_coherent_kern_range) -+ /* fall through */ -+ -+/* -+ * coherent_user_range(start, end) -+ * -+ * Ensure coherency between the Icache and the Dcache in the -+ * region described by start. If you have non-snooping -+ * Harvard caches, you need to implement this function. -+ * -+ * - start - virtual start address -+ * - end - virtual end address -+ */ -+ENTRY(fa_coherent_user_range) -+ -+/* Luke Lee 04/06/2005 mod ok */ -+ /* Luke Lee 04/06/2005 ins 3 mod 1 */ -+ bic r0, r0, #CACHE_DLINESIZE-1 -+ -+ //debug_Aaron -+ bic r0, r0, #CACHE_DLINESIZE-1 -+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry -+ bic r1, r1, #CACHE_DLINESIZE-1 -+ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry -+ -+#if !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE)) -+1: /* Luke Lee 04/06/2005 del 2 ins 5 mod 1 */ -+#ifndef CONFIG_CPU_DCACHE_DISABLE -+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH -+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry -+#else -+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry -+#endif -+#endif /* CONFIG_CPU_DCACHE_DISABLE */ -+ -+#ifndef CONFIG_CPU_ICACHE_DISABLE -+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry -+#endif -+ add r0, r0, #CACHE_DLINESIZE -+ cmp r0, r1 -+ bls 1b @ Luke Lee 05/19/2005 blo->bls -+#endif /* !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE)) */ -+ -+ mov ip, #0 -+#ifdef CONFIG_CPU_FA_BTB -+ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB -+ nop -+ nop -+#endif -+ -+/* Luke Lee 04/08/2005 ins 1 skp 1 ins 1 */ -+#ifndef CONFIG_CPU_FA_WB_DISABLE -+ mcr p15, 0, ip, c7, c10, 4 @ drain WB -+#endif -+ -+ mov pc, lr -+ -+/* -+ * dma_inv_range(start, end) -+ * -+ * Invalidate (discard) the specified virtual address range. -+ * May not write back any entries. If 'start' or 'end' -+ * are not cache line aligned, those lines must be written -+ * back. -+ * -+ * - start - virtual start address -+ * - end - virtual end address -+ */ -+ENTRY(fa_dma_inv_range) -+ -+/* Luke Lee 04/06/2005 mod ok */ -+ -+#ifndef CONFIG_CPU_DCACHE_DISABLE -+ -+ //debug_Aaron -+ bic r0, r0, #CACHE_DLINESIZE-1 -+ mcr p15, 0, r0, c7, c6, 1 @ invalidate boundary D entry -+ bic r1, r1, #CACHE_DLINESIZE-1 -+ mcr p15, 0, r1, c7, c6, 1 @ invalidate boundary D entry -+ -+ /* Luke Lee 04/06/2005 ins 4 mod 2 */ -+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH -+ tst r0, #CACHE_DLINESIZE -1 -+ bic r0, r0, #CACHE_DLINESIZE -1 -+ -+//debug_Aaron -+ //mcrne p15, 0, r0, c7, c10, 1 @ clean boundary D entry -+ -+ /* Luke Lee 04/06/2005 mod 1 */ -+ /* Luke Lee 05/19/2005 always clean the end-point boundary mcrne->mcr */ -+ ////tst r1, #CACHE_DLINESIZE -1 -+ //mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry -+ /* Luke Lee 04/06/2005 ins 1 */ -+#else -+ bic r0, r0, #CACHE_DLINESIZE -1 -+#endif -+ -+//debug_Aaron -+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry -+//1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry -+ -+ /* Luke Lee 04/06/2005 mod 1 */ -+ add r0, r0, #CACHE_DLINESIZE -+ cmp r0, r1 -+ bls 1b @ Luke Lee 05/19/2005 blo->bls -+#endif /* CONFIG_CPU_DCACHE_DISABLE */ -+ -+ /* Luke Lee 04/06/2005 ins 1 */ -+#ifndef CONFIG_CPU_FA_WB_DISABLE -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer -+#endif -+ -+ mov pc, lr -+ -+/* -+ * dma_clean_range(start, end) -+ * -+ * Clean (write back) the specified virtual address range. -+ * -+ * - start - virtual start address -+ * - end - virtual end address -+ */ -+ENTRY(fa_dma_clean_range) -+ -+/* Luke Lee 04/06/2005 mod ok */ -+#ifndef CONFIG_CPU_DCACHE_DISABLE -+ -+ //debug_Aaron -+ bic r0, r0, #CACHE_DLINESIZE-1 -+ mcr p15, 0, r0, c7, c10, 1 @ clean boundary D entry -+ bic r1, r1, #CACHE_DLINESIZE-1 -+ mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry -+ -+ /* Luke Lee 04/06/2005 ins 4 mod 2 */ -+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH -+ bic r0, r0, #CACHE_DLINESIZE - 1 -+ -+//debug_Aaron -+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry -+//1: mcr p15, 0, r0, c7, c14, 1 @ clean D entry -+ add r0, r0, #CACHE_DLINESIZE -+ cmp r0, r1 -+ bls 1b @ Luke Lee 05/19/2005 blo->bls -+ /* Luke Lee 04/06/2005 ins 2 */ -+#endif -+#endif /* CONFIG_CPU_DCACHE_DISABLE */ -+ -+#ifndef CONFIG_CPU_FA_WB_DISABLE -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer -+#endif -+ -+ mov pc, lr -+ -+/* -+ * dma_flush_range(start, end) -+ * -+ * Clean and invalidate the specified virtual address range. -+ * -+ * - start - virtual start address -+ * - end - virtual end address -+ * -+ * This is actually the same as fa_coherent_kern_range() -+ */ -+ .globl fa_dma_flush_range -+ .set fa_dma_flush_range, fa_coherent_kern_range -+ -+ __INITDATA -+ -+ .type fa_cache_fns, #object -+ENTRY(fa_cache_fns) -+ .long fa_flush_kern_cache_all -+ .long fa_flush_user_cache_all -+ .long fa_flush_user_cache_range -+ .long fa_coherent_kern_range -+ .long fa_coherent_user_range -+ .long fa_flush_kern_dcache_page -+ .long fa_dma_inv_range -+ .long fa_dma_clean_range -+ .long fa_dma_flush_range -+ .size fa_cache_fns, . - fa_cache_fns ---- /dev/null -+++ b/arch/arm/mm/copypage-fa.S -@@ -0,0 +1,106 @@ -+/* -+ * linux/arch/arm/lib/copypage-fa.S -+ * -+ * Copyright (C) 2005 Faraday Corp. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * ASM optimised string functions -+ * 05/18/2005 : Luke Lee created, modified from copypage-v4wb.S -+ */ -+#include -+#include -+#include -+ -+ .text -+/* -+ * ARMv4 optimised copy_user_page for Faraday processors -+ * -+ * We flush the destination cache lines just before we write the data into the -+ * corresponding address. Since the Dcache is read-allocate, this removes the -+ * Dcache aliasing issue. The writes will be forwarded to the write buffer, -+ * and merged as appropriate. -+ * -+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line" -+ * instruction. If your processor does not supply this, you have to write your -+ * own copy_user_page that does the right thing. -+ * -+ * copy_user_page(to,from,vaddr) -+ */ -+ .align 4 -+ENTRY(fa_copy_user_page) -+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH -+ /* Write through */ -+ stmfd sp!, {r4, lr} @ 2 -+ mov r2, #PAGE_SZ/32 @ 1 -+ -+ ldmia r1!, {r3, r4, ip, lr} @ 4 -+1: stmia r0!, {r3, r4, ip, lr} @ 4 -+ ldmia r1!, {r3, r4, ip, lr} @ 4+1 -+ subs r2, r2, #1 @ 1 -+ stmia r0!, {r3, r4, ip, lr} @ 4 -+ ldmneia r1!, {r3, r4, ip, lr} @ 4 -+ bne 1b @ 1 -+ -+ mcr p15, 0, r2, c7, c7, 0 @ flush ID cache -+ ldmfd sp!, {r4, pc} @ 3 -+#else -+ /* Write back */ -+ stmfd sp!, {r4, lr} @ 2 -+ mov r2, #PAGE_SZ/32 @ 1 -+ -+1: ldmia r1!, {r3, r4, ip, lr} @ 4 -+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line -+ stmia r0!, {r3, r4, ip, lr} @ 4 -+ ldmia r1!, {r3, r4, ip, lr} @ 4 -+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line -+ stmia r0!, {r3, r4, ip, lr} @ 4 -+ subs r2, r2, #1 @ 1 -+ bne 1b -+ mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB -+ ldmfd sp!, {r4, pc} @ 3 -+#endif -+ -+/* -+ * ARMv4 optimised clear_user_page -+ * -+ * Same story as above. -+ */ -+ .align 4 -+ENTRY(fa_clear_user_page) -+ str lr, [sp, #-4]! -+ mov r1, #PAGE_SZ/32 @ 1 -+ mov r2, #0 @ 1 -+ mov r3, #0 @ 1 -+ mov ip, #0 @ 1 -+ mov lr, #0 @ 1 -+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH -+ /* Write through */ -+1: stmia r0!, {r2, r3, ip, lr} @ 4 -+ stmia r0!, {r2, r3, ip, lr} @ 4 -+ subs r1, r1, #1 @ 1 -+ bne 1b @ 1 -+ -+ mcr p15, 0, r1, c7, c7, 0 @ flush ID cache -+ ldr pc, [sp], #4 -+#else -+ /* Write back */ -+1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line -+ stmia r0!, {r2, r3, ip, lr} @ 4 -+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line -+ stmia r0!, {r2, r3, ip, lr} @ 4 -+ subs r1, r1, #1 @ 1 -+ bne 1b @ 1 -+ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB -+ ldr pc, [sp], #4 -+#endif -+ -+ __INITDATA -+ -+ .type fa_user_fns, #object -+ENTRY(fa_user_fns) -+ .long fa_clear_user_page -+ .long fa_copy_user_page -+ .size fa_user_fns, . - fa_user_fns ---- a/arch/arm/mm/init.c -+++ b/arch/arm/mm/init.c -@@ -23,6 +23,7 @@ - - #include - #include -+#include - - #include "mm.h" - -@@ -252,6 +253,11 @@ bootmem_init_node(int node, int initrd_n - initrd_end = initrd_start + phys_initrd_size; - } - #endif -+#ifdef CONFIG_GEMINI_IPI -+ printk("CPU ID:%d\n",getcpuid()); -+// reserve_bootmem_node(NODE_DATA(0), 0x400000, 0x400000); //CPU0 space -+// reserve_bootmem_node(NODE_DATA(0), SHAREADDR, SHARE_MEM_SIZE); //share memory -+#endif - - /* - * Finally, reserve any node zero regions. ---- /dev/null -+++ b/arch/arm/mm/proc-fa526.S -@@ -0,0 +1,407 @@ -+/* -+ * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526 -+ * -+ * Copyright (C) 2005 Faraday Corp. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ * -+ * These are the low level assembler for performing cache and TLB -+ * functions on the fa526. -+ * -+ * Written by : Luke Lee -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "proc-macros.S" -+ -+#define CACHE_DLINESIZE 16 -+ -+ .text -+/* -+ * cpu_fa526_proc_init() -+ */ -+ENTRY(cpu_fa526_proc_init) -+ /* MMU is already ON here, ICACHE, DCACHE conditionally disabled */ -+ -+ mov r0, #1 -+ nop -+ nop -+ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR -+ nop -+ nop -+ -+ mrc p15, 0, r0, c1, c0, 0 @ read ctrl register -+ -+#ifdef CONFIG_CPU_FA_BTB -+ orr r0, r0, #CR_Z -+#else -+ bic r0, r0, #CR_Z -+#endif -+#ifdef CONFIG_CPU_FA_WB_DISABLE -+ mov r1, #0 -+ mcr p15, 0, r1, c7, c10, 4 @ drain write buffer -+ nop -+ nop -+ bic r0, r0, #CR_W -+#else -+ orr r0, r0, #CR_W -+#endif -+#ifdef CONFIG_CPU_DCACHE_DISABLE -+ bic r0, r0, #CR_C -+#else -+ orr r0, r0, #CR_C -+#endif -+#ifdef CONFIG_CPU_ICACHE_DISABLE -+ bic r0, r0, #CR_I -+#else -+ orr r0, r0, #CR_I -+#endif -+ -+ nop -+ nop -+ mcr p15, 0, r0, c1, c0, 0 -+ nop -+ nop -+ -+ mov r5, lr -+ bl fa_initialize_cache_info @ destroy r0~r4 -+ mov pc, r5 @ return -+ -+ -+/* -+ * cpu_fa526_proc_fin() -+ */ -+ENTRY(cpu_fa526_proc_fin) -+ stmfd sp!, {lr} -+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE -+ msr cpsr_c, ip -+ -+ bl fa_flush_kern_cache_all -+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register -+ bic r0, r0, #0x1000 @ ...i............ -+ bic r0, r0, #0x000e @ ............wca. -+ mcr p15, 0, r0, c1, c0, 0 @ disable caches -+ -+ nop -+ nop -+ ldmfd sp!, {pc} -+ -+/* -+ * cpu_fa526_reset(loc) -+ * -+ * Perform a soft reset of the system. Put the CPU into the -+ * same state as it would be if it had been reset, and branch -+ * to what would be the reset vector. -+ * -+ * loc: location to jump to for soft reset -+ */ -+ .align 4 -+ENTRY(cpu_fa526_reset) -+ mov ip, #0 -+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches -+#ifndef CONFIG_CPU_FA_WB_DISABLE -+ mcr p15, 0, ip, c7, c10, 4 @ drain WB -+#endif -+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs -+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register -+ bic ip, ip, #0x000f @ ............wcam -+ bic ip, ip, #0x1100 @ ...i...s........ -+ -+ bic ip, ip, #0x0800 @ BTB off -+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register -+ nop -+ nop -+ mov pc, r0 -+ -+/* -+ * cpu_fa526_do_idle() -+ */ -+ .align 4 -+ENTRY(cpu_fa526_do_idle) -+ -+#ifdef CONFIG_CPU_FA_IDLE -+ nop -+ nop -+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt (IDLE mode) -+#endif -+ mov pc, lr -+ -+ -+ENTRY(cpu_fa526_dcache_clean_area) -+ -+#ifndef CONFIG_CPU_DCACHE_DISABLE -+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH -+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry -+ add r0, r0, #CACHE_DLINESIZE -+ subs r1, r1, #CACHE_DLINESIZE -+ bhi 1b -+#endif -+#endif -+ mov pc, lr -+ -+ -+/* =============================== PageTable ============================== */ -+ -+/* -+ * cpu_fa526_switch_mm(pgd) -+ * -+ * Set the translation base pointer to be as described by pgd. -+ * -+ * pgd: new page tables -+ */ -+ .align 4 -+ -+ .globl fault_address -+fault_address: -+ .long 0 -+ -+ENTRY(cpu_fa526_switch_mm) -+ -+ mov ip, #0 -+#ifndef CONFIG_CPU_DCACHE_DISABLE -+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH -+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache -+#else -+ mcr p15, 0, ip, c7, c14, 0 @ Clean and invalidate whole DCache -+#endif -+#endif /*CONFIG_CPU_DCACHE_DISABLE*/ -+ -+#ifndef CONFIG_CPU_ICACHE_DISABLE -+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache -+#endif -+ -+#ifndef CONFIG_CPU_FA_WB_DISABLE -+ mcr p15, 0, ip, c7, c10, 4 @ drain WB -+#endif -+ -+#ifdef CONFIG_CPU_FA_BTB -+ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed -+ nop -+ nop -+#endif -+ bic r0, r0, #0xff @ clear bits [7:0] -+ bic r0, r0, #0x3f00 @ clear bits [13:8] -+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer -+ mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB -+ nop -+ nop -+ mov pc, lr -+ -+/* -+ * cpu_fa526_set_pte_ext(ptep, pte, ext) -+ * -+ * Set a PTE and flush it out -+ */ -+ .align 4 -+ENTRY(cpu_fa526_set_pte_ext) -+ str r1, [r0], #-2048 @ linux version -+ -+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY -+ -+ bic r2, r1, #PTE_SMALL_AP_MASK -+ bic r2, r2, #PTE_TYPE_MASK -+ orr r2, r2, #PTE_TYPE_SMALL -+ -+ tst r1, #L_PTE_USER @ User? -+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW -+ -+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? -+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW -+ -+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? -+ movne r2, #0 -+ -+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH -+ eor r3, r2, #0x0a @ C & small page? 1010 -+ tst r3, #0x0b @ 1011 -+ biceq r2, r2, #4 -+#endif -+ str r2, [r0] @ hardware version -+ -+ mov r2, #0 -+ mcr p15, 0, r2, c7, c10, 0 @ clean D cache all -+ -+#ifndef CONFIG_CPU_FA_WB_DISABLE -+ mcr p15, 0, r2, c7, c10, 4 @ drain WB -+#endif -+#ifdef CONFIG_CPU_FA_BTB -+ mcr p15, 0, r2, c7, c5, 6 @ invalidate BTB -+ nop -+ nop -+#endif -+ mov pc, lr -+ -+ __INIT -+ -+ .type __fa526_setup, #function -+__fa526_setup: -+ /* On return of this routine, r0 must carry correct flags for CFG register */ -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 -+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 -+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 -+ -+ mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM -+ -+ mov r0, #1 -+ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR -+ -+ mrc p15, 0, r0, c9, c1, 0 @ DScratchpad -+ bic r0, r0, #1 -+ mcr p15, 0, r0, c9, c1, 0 -+ mrc p15, 0, r0, c9, c1, 1 @ IScratchpad -+ bic r0, r0, #1 -+ mcr p15, 0, r0, c9, c1, 1 -+ -+ mov r0, #0 -+ mcr p15, 0, r0, c1, c1, 0 @ turn-off ECR -+ -+#ifdef CONFIG_CPU_FA_BTB -+ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All -+ nop -+ nop -+#endif -+ -+ mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client -+ mcr p15, 0, r0, c3, c0 @ load domain access register -+ -+ mrc p15, 0, r0, c1, c0 @ get control register v4 -+ ldr r5, fa526_cr1_clear -+ bic r0, r0, r5 -+ ldr r5, fa526_cr1_set -+ orr r0, r0, r5 -+ -+#ifdef CONFIG_CPU_FA_BTB -+ orr r0, r0, #CR_Z -+#else -+ bic r0, r0, #CR_Z -+#endif -+#ifdef CONFIG_CPU_FA_WB_DISABLE -+ mov r12, #0 -+ mcr p15, 0, r12, c7, c10, 4 @ drain write buffer -+ nop -+ nop -+ bic r0, r0, #CR_W @ .... .... .... 1... -+#else -+ orr r0, r0, #CR_W -+#endif -+ -+ mov pc, lr -+ .size __fa526_setup, . - __fa526_setup -+ -+ /* -+ * .RVI ZFRS BLDP WCAM -+ * ..11 0001 .111 1101 -+ * -+ */ -+ .type fa526_cr1_clear, #object -+ .type fa526_cr1_set, #object -+fa526_cr1_clear: -+ .word 0x3f3f -+fa526_cr1_set: -+ .word 0x317D -+ -+ __INITDATA -+ -+/* -+ * Purpose : Function pointers used to access above functions - all calls -+ * come through these -+ */ -+ .type fa526_processor_functions, #object -+fa526_processor_functions: -+ .word v4_early_abort -+ .word cpu_fa526_proc_init -+ .word cpu_fa526_proc_fin -+ .word cpu_fa526_reset -+ .word cpu_fa526_do_idle -+ .word cpu_fa526_dcache_clean_area -+ .word cpu_fa526_switch_mm -+ .word cpu_fa526_set_pte_ext -+ .size fa526_processor_functions, . - fa526_processor_functions -+ -+ .section ".rodata" -+ -+ .type cpu_arch_name, #object -+cpu_arch_name: -+ .asciz "armv4" -+ .size cpu_arch_name, . - cpu_arch_name -+ -+ .type cpu_elf_name, #object -+cpu_elf_name: -+ .asciz "v4" -+ .size cpu_elf_name, . - cpu_elf_name -+ -+ .type cpu_fa526_name, #object -+cpu_fa526_name: -+ .ascii "FA526" -+#ifndef CONFIG_CPU_ICACHE_DISABLE -+ .ascii "i" -+#endif -+#ifndef CONFIG_CPU_DCACHE_DISABLE -+ .ascii "d" -+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH -+ .ascii "(wt)" -+#else -+ .ascii "(wb)" -+#endif -+#endif -+ .ascii "\0" -+ .size cpu_fa526_name, . - cpu_fa526_name -+ -+ .align -+ -+ .section ".proc.info.init", #alloc, #execinstr -+ -+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH -+#define __PMD_SECT_BUFFERABLE 0 -+#else -+#define __PMD_SECT_BUFFERABLE PMD_SECT_BUFFERABLE -+#endif -+ -+ .type __fa526_proc_info,#object -+__fa526_proc_info: -+ .long 0x66015261 -+ .long 0xff01fff1 -+ .long PMD_TYPE_SECT | \ -+ __PMD_SECT_BUFFERABLE | \ -+ PMD_SECT_CACHEABLE | \ -+ PMD_BIT4 | \ -+ PMD_SECT_AP_WRITE | \ -+ PMD_SECT_AP_READ -+ .long PMD_TYPE_SECT | \ -+ PMD_BIT4 | \ -+ PMD_SECT_AP_WRITE | \ -+ PMD_SECT_AP_READ -+ b __fa526_setup -+ .long cpu_arch_name -+ .long cpu_elf_name -+ .long HWCAP_SWP | HWCAP_HALF -+ .long cpu_fa526_name -+ .long fa526_processor_functions -+ .long fa_tlb_fns -+ .long fa_user_fns -+ .long fa_cache_fns -+ .size __fa526_proc_info, . - __fa526_proc_info -+ -+ ---- /dev/null -+++ b/arch/arm/mm/tlb-fa.S -@@ -0,0 +1,96 @@ -+/* -+ * linux/arch/arm/mm/tlb-fa.S -+ * -+ * Copyright (C) 2005 Faraday Corp. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * ARM architecture version 4, Faraday variation. -+ * This assume an unified TLBs, with a write buffer, and branch target buffer (BTB) -+ * -+ * Processors: FA520 FA526 FA626 -+ * 03/31/2005 : Created by Luke Lee, modified from tlb-v4wbi.S -+ * 05/06/2005 : Fixed buggy CPU versions that did not invalidate the associated -+ * data cache entries when invalidating TLB entries. -+ */ -+#include -+#include -+#include -+#include -+#include "proc-macros.S" -+ -+ -+/* -+ * flush_user_tlb_range(start, end, mm) -+ * -+ * Invalidate a range of TLB entries in the specified address space. -+ * -+ * - start - range start address -+ * - end - range end address -+ * - mm - mm_struct describing address space -+ */ -+ .align 4 -+ENTRY(fa_flush_user_tlb_range) -+ -+ vma_vm_mm ip, r2 -+ act_mm r3 @ get current->active_mm -+ eors r3, ip, r3 @ == mm ? -+ movne pc, lr @ no, we dont do anything -+ mov r3, #0 -+ -+#ifndef CONFIG_CPU_FA_WB_DISABLE -+ mcr p15, 0, r3, c7, c10, 4 @ drain WB -+#endif -+ -+ vma_vm_flags r2, r2 -+ bic r0, r0, #0x0ff -+ bic r0, r0, #0xf00 -+ -+1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry -+ add r0, r0, #PAGE_SZ -+ cmp r0, r1 -+ bls 1b @ Luke Lee 05/19/2005 blo -> bls -+ -+#ifdef CONFIG_CPU_FA_BTB -+ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB -+ nop -+ nop -+#endif -+ mov pc, lr -+ -+ -+ENTRY(fa_flush_kern_tlb_range) -+ mov r3, #0 -+ -+ mcr p15, 0, r3, c7, c10, 0 @ clean Dcache all 06/03/2005 -+ -+#ifndef CONFIG_CPU_FA_WB_DISABLE -+ mcr p15, 0, r3, c7, c10, 4 @ drain WB -+#endif -+ -+ bic r0, r0, #0x0ff -+ bic r0, r0, #0xf00 -+1: -+ mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry -+ add r0, r0, #PAGE_SZ -+ cmp r0, r1 -+ bls 1b @ Luke Lee 05/19/2005 blo -> bls -+ -+#ifdef CONFIG_CPU_FA_BTB -+ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB -+ nop -+ nop -+#endif -+ mov pc, lr -+ -+ -+ __INITDATA -+ -+ .type fa_tlb_fns, #object -+ENTRY(fa_tlb_fns) -+ .long fa_flush_user_tlb_range -+ .long fa_flush_kern_tlb_range -+ .long fa_tlb_flags -+ .size fa_tlb_fns, . - fa_tlb_fns ---- a/arch/arm/tools/mach-types -+++ b/arch/arm/tools/mach-types -@@ -208,7 +208,8 @@ karo ARCH_KARO KARO 190 - fester SA1100_FESTER FESTER 191 - gpi ARCH_GPI GPI 192 - smdk2410 ARCH_SMDK2410 SMDK2410 193 --i519 ARCH_I519 I519 194 -+#i519 ARCH_I519 I519 194 -+sl2312 ARCH_SL2312 SL2312 194 - nexio SA1100_NEXIO NEXIO 195 - bitbox SA1100_BITBOX BITBOX 196 - g200 SA1100_G200 G200 197 ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/SL_gpio.h -@@ -0,0 +1,59 @@ -+#define GPIO_MINOR_LAST 31 -+#define GPIO_MAJOR 120 // Experiemental -+ -+#define GPIO_IRQ_NBR 12 -+ -+#define GPIOBASEADDR (IO_ADDRESS(0x021000000)) -+ -+#define GPIODATAOUTOFF 0x00 -+#define GPIODATAINOFF 0x04 -+#define GPIOPINDIROFF 0x08 -+#define GPIOPINBYPASSOFF 0x0C -+#define GPIODATASETOFF 0x10 -+#define GPIODATACLEAROFF 0x14 -+#define GPIOPINPULLENBOFF 0x18 -+#define GPIOPINPULLTPOFF 0x1C -+#define GPIOINTRENBOFF 0x20 -+#define GPIOINTRRAWSOFF 0x24 -+#define GPIOINTRMASKEDSTATEOFF 0x28 -+#define GPIOINTRMASKOFF 0x2C -+#define GPIOINTRCLEAROFF 0x30 -+#define GPIOINTRTRIGGEROFF 0x34 -+#define GPIOINTRBOTHOFF 0x38 -+#define GPIOINTRRISENEGOFF 0x3C -+#define GPIOBNCEENBOFF 0x40 -+#define GPIOBNCEPRESOFF 0x44 -+ -+#define GPIO_IOCTRL_SETDIR 0x20 -+#define GPIO_IOCTRL_SET 0x40 -+#define GPIO_IOCTRL_CLEAR 0x50 -+#define GPIO_IOCTRL_ENBINT 0x60 -+#define GPIO_IOCTRL_MASKINT 0x70 -+#define GPIO_IOCTRL_LVLTRIG 0x75 -+#define GPIO_IOCTRL_EDGINT 0x77 -+#define GPIO_IOCTRL_EDGPOLINT 0x78 -+#define GPIO_IOCTRL_BYPASS 0x30 -+#define GPIO_IOCTRL_PRESCLK 0x80 -+#define GPIO_IOCTRL_CLKVAL 0x90 -+#define GPIO_IOCTRL_PULLENB 0xA0 -+#define GPIO_IOCTRL_PULLTYPE 0xA8 -+ -+ -+#define GPIO_MAJOR 120 /* experimental MAJOR number */ -+ // Minor - 0 : 31 gpio pins -+ -+#define GPIO_SET 0x01 -+#define GPIO_CLEAR 0x01 -+ -+#define GPIO_INPUT 0 -+#define GPIO_OUTPUT 1 -+#define GPIO_EDGEINTR 0 -+#define GPIO_EDGESINGL 0 -+#define GPIO_EDGEBOTH 1 -+#define GPIO_POSITIVE 0 -+#define GPIO_ENBINT 1 -+#define GPIO_DISABLEMASK 1 -+#define GPIO_PULLDOWN 0 -+#define GPIO_PULLUP 1 -+#define GPIO_ENABLEPULL 1 -+#define GPIO_DISABLEPULL 0 ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/debug-macro.S -@@ -0,0 +1,20 @@ -+/* linux/include/asm-arm/arch-ebsa110/debug-macro.S -+ * -+ * Debugging macro include header -+ * -+ * Copyright (C) 1994-1999 Russell King -+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+**/ -+ -+ .macro addruart,rx -+ mov \rx, #0x42000000 -+ .endm -+ -+#define UART_SHIFT 2 -+#define FLOW_CONTROL -+#include ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/dma.h -@@ -0,0 +1,28 @@ -+/* -+ * linux/include/asm-arm/arch-camelot/dma.h -+ * -+ * Copyright (C) 1997,1998 Russell King -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_DMA_H -+#define __ASM_ARCH_DMA_H -+ -+#define MAX_DMA_ADDRESS 0xffffffff -+ -+#define MAX_DMA_CHANNELS 0 -+ -+#endif /* _ASM_ARCH_DMA_H */ -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/entry-macro.S -@@ -0,0 +1,42 @@ -+/* -+ * include/asm-arm/arch-arm/entry-macro.S -+ * -+ * Low-level IRQ helper macros for ebsa110 platform. -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+#include -+#include -+ -+ -+ .macro disable_fiq -+ .endm -+ -+ .macro get_irqnr_preamble, base, tmp -+ .endm -+ -+ .macro arch_ret_to_user, tmp1, tmp2 -+ .endm -+ -+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -+ ldr \irqstat, =IRQ_STATUS(IO_ADDRESS(SL2312_INTERRUPT_BASE)) -+ ldr \irqnr,[\irqstat] -+ cmp \irqnr,#0 -+ beq 2313f -+ mov \tmp,\irqnr -+ mov \irqnr,#0 -+2312: -+ tst \tmp, #1 -+ bne 2313f -+ add \irqnr, \irqnr, #1 -+ mov \tmp, \tmp, lsr #1 -+ cmp \irqnr, #31 -+ bcc 2312b -+2313: -+ .endm -+ -+ .macro irq_prio_table -+ .endm -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/flash.h -@@ -0,0 +1,83 @@ -+#ifndef __ASM_ARM_ARCH_FLASH_H -+#define __ASM_ARM_ARCH_FLASH_H -+ -+#define FLASH_START SL2312_FLASH_BASE -+#define SFLASH_SIZE 0x00400000 -+#define SPAGE_SIZE 0x200 -+#define BLOCK_ERASE 0x50 -+#define BUFFER1_READ 0x54 -+#define BUFFER2_READ 0x56 -+#define PAGE_ERASE 0x81 -+#define MAIN_MEMORY_PAGE_READ 0x52 -+#define MAIN_MEMORY_PROGRAM_BUFFER1 0x82 -+#define MAIN_MEMORY_PROGRAM_BUFFER2 0x85 -+#define BUFFER1_TO_MAIN_MEMORY 0x83 -+#define BUFFER2_TO_MAIN_MEMORY 0x86 -+#define MAIN_MEMORY_TO_BUFFER1 0x53 -+#define MAIN_MEMORY_TO_BUFFER2 0x55 -+#define BUFFER1_WRITE 0x84 -+#define BUFFER2_WRITE 0x87 -+#define AUTO_PAGE_REWRITE_BUFFER1 0x58 -+#define AUTO_PAGE_REWRITE_BUFFER2 0x59 -+#define READ_STATUS 0x57 -+ -+#define MAIN_MEMORY_PAGE_READ_SPI 0xD2 -+#define BUFFER1_READ_SPI 0xD4 -+#define BUFFER2_READ_SPI 0xD6 -+#define READ_STATUS_SPI 0xD7 -+ -+#define FLASH_ACCESS_OFFSET 0x00000010 -+#define FLASH_ADDRESS_OFFSET 0x00000014 -+#define FLASH_WRITE_DATA_OFFSET 0x00000018 -+#define FLASH_READ_DATA_OFFSET 0x00000018 -+#define SERIAL_FLASH_CHIP1_EN 0x00010000 // 16th bit = 1 -+#define SERIAL_FLASH_CHIP0_EN 0x00000000 // 16th bit = 0 -+#define AT45DB321_PAGE_SHIFT 0xa -+#define AT45DB642_PAGE_SHIFT 0xb -+#define CONTINUOUS_MODE 0x00008000 -+ -+#define FLASH_ACCESS_ACTION_OPCODE 0x0000 -+#define FLASH_ACCESS_ACTION_OPCODE_DATA 0x0100 -+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS 0x0200 -+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA 0x0300 -+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0400 -+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_2X_DATA 0x0500 -+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_3X_DATA 0x0600 -+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700 -+//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0600 -+//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700 -+ -+#define M25P80_PAGE_SIZE 0x100 -+#define M25P80_SECTOR_SIZE 0x10000 -+ -+ -+//#define M25P80_BULK_ERASE 1 -+//#define M25P80_SECTOR_ERASE 2 -+//#define M25P80_SECTOR_SIZE 0x10000 -+ -+#define M25P80_WRITE_ENABLE 0x06 -+#define M25P80_WRITE_DISABLE 0x04 -+#define M25P80_READ_STATUS 0x05 -+#define M25P80_WRITE_STATUS 0x01 -+#define M25P80_READ 0x03 -+#define M25P80_FAST_READ 0x0B -+#define M25P80_PAGE_PROGRAM 0x02 -+#define M25P80_SECTOR_ERASE 0xD8 -+#define M25P80_BULK_ERASE 0xC7 -+#define FLASH_ERR_OK 0x0 -+ -+extern void address_to_page(__u32, __u16 *, __u16 *); -+extern void main_memory_page_read(__u8, __u16, __u16, __u8 *); -+extern void buffer_to_main_memory(__u8, __u16); -+extern void main_memory_to_buffer(__u8, __u16); -+extern void main_memory_page_program(__u8, __u16, __u16, __u8); -+extern void atmel_flash_read_page(__u32, __u8 *, __u32); -+extern void atmel_erase_page(__u8, __u16); -+extern void atmel_read_status(__u8, __u8 *); -+extern void atmel_flash_program_page(__u32, __u8 *, __u32); -+extern void atmel_buffer_write(__u8, __u16, __u8); -+extern void flash_delay(void); -+ -+extern int m25p80_sector_erase(__u32 address, __u32 schip_en); -+ -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/gemini_cir.h -@@ -0,0 +1,102 @@ -+#ifndef _ASM_ARCH_CIR_H -+#define _ASM_ARCH_CIR_H -+#include -+ -+#define VCR_KEY_POWER 0x613E609F -+#define TV1_KEY_POWER 0x40040100 -+#define TV1_KEY_POWER_EXT 0xBCBD -+#define RC5_KER_POWER 0x0CF3 -+ -+#define VCC_H_ACT_PER (16-1) -+#define VCC_L_ACT_PER (8-1) -+#define VCC_DATA_LEN (32-1) -+#define TV1_H_ACT_PER (8-1) -+#define TV1_L_ACT_PER (4-1) -+#define TV1_DATA_LEN (48-1) -+ -+#define VCC_BAUD 540 -+#define TV1_BAUD 430 -+#ifdef CONFIG_SL3516_ASIC -+#define EXT_CLK 60 -+#else -+#define EXT_CLK 20 -+#endif -+ -+#define NEC_PROTOCOL 0x0 -+#define RC5_PROTOCOL 0x1 -+#define VCC_PROTOCOL 0x0 -+#define TV1_PROTOCOL 0x01 -+ -+#ifndef SL2312_CIR_BASE -+#define SL2312_CIR_BASE 0x4C000000 -+#endif -+#define CIR_BASE_ADDR IO_ADDRESS(SL2312_CIR_BASE) -+#define STORLINK_CIR_ID 0x00010400 -+ -+#define CIR_IP_ID *(volatile unsigned int *)(CIR_BASE_ADDR + 0x00) -+#define CIR_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x04) -+#define CIR_STATUS_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x08) -+#define CIR_RX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x0C) -+#define CIR_RX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x10) -+#define CIR_PWR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x14) -+#define CIR_PWR_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x18) -+#define CIR_TX_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x1C) -+#define CIR_TX_FEQ_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x20) -+#define CIR_TX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x24) -+#define CIR_TX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x28) -+ -+ -+#ifndef SL2312_POWER_CTRL_BASE -+#define SL2312_POWER_CTRL_BASE 0x4B000000 -+#endif -+ -+#ifndef PWR_BASE_ADDR -+#define PWR_BASE_ADDR IO_ADDRESS(SL2312_POWER_CTRL_BASE) -+#endif -+#define PWR_CTRL_ID *(unsigned int*)(PWR_BASE_ADDR+0x00) -+#define PWR_CTRL_REG *(unsigned int*)(PWR_BASE_ADDR+0x04) -+#define PWR_STATUS_REG *(unsigned int*)(PWR_BASE_ADDR+0x08) -+ -+ -+#define BIT(x) (1< -+ * -+ * Copyright 2005 Storlink Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#ifndef __GEMINI_GPIO_H -+#define __GEMINI_GPIO_H -+ -+#include -+ -+#define STATUS_HIGH 1 -+#define STATUS_LOW 0 -+#define DIRECT_OUT 1 -+#define DIRECT_IN 0 -+ -+#define EDGE_TRIG 0 -+#define RISING_EDGE 0 -+#define FALL_EDGE 1 -+#define SINGLE_EDGE 0 -+#define BOTH_EDGE 1 -+ -+#define LEVEL_TRIG 1 -+#define HIGH_ACTIVE 0 -+#define LOW_ACTIVE 1 -+ -+struct gemini_gpio_ioctl_data { -+ __u32 pin; -+ __u8 status; // status or pin direction -+ // 0: status low or Input -+ // 1: status high or Output -+ -+ /* these member are used to config GPIO interrupt parameter */ -+ __u8 use_default; // if not sure ,set this argument 1 -+ __u8 trig_type; // 0/1:edge/level triger ? -+ __u8 trig_polar; // 0/1:rising/falling high/low active ? -+ __u8 trig_both; // 0/1:single/both detect both ? -+}; -+ -+#define GEMINI_GPIO_IOCTL_BASE 'Z' -+ -+#define GEMINI_SET_GPIO_PIN_DIR _IOW (GEMINI_GPIO_IOCTL_BASE,16, struct gemini_gpio_ioctl_data) -+#define GEMINI_SET_GPIO_PIN_STATUS _IOW (GEMINI_GPIO_IOCTL_BASE,17, struct gemini_gpio_ioctl_data) -+#define GEMINI_GET_GPIO_PIN_STATUS _IOWR(GEMINI_GPIO_IOCTL_BASE,18, struct gemini_gpio_ioctl_data) -+#define GEMINI_WAIT_GPIO_PIN_INT _IOWR(GEMINI_GPIO_IOCTL_BASE,19, struct gemini_gpio_ioctl_data) -+ -+ -+extern void init_gpio_int(__u32 pin,__u8 trig_type,__u8 trig_polar,__u8 trig_both); -+extern int request_gpio_irq(int bit,void (*handler)(int),char level,char high,char both); -+extern int free_gpio_irq(int bit); -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/gemini_i2s.h -@@ -0,0 +1,169 @@ -+#ifndef __GEMINI_I2S_H__ -+#define __GEMINI_I2S_H__ -+#include -+#include -+#include -+ -+typedef __u16 UINT16; -+typedef __u32 UINT32; -+typedef __u8 UINT8; -+typedef __u8 BOOL; -+ -+/***************************************/ -+/* define GPIO module base address */ -+/***************************************/ -+#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE)) -+#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE)) -+#define SSP_INT IRQ_SSP -+#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) -+#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1)) -+#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE)) -+ -+/* define read/write register utility */ -+#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE)) -+#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE)) -+ -+#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR)) -+#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR)) -+ -+#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1)) -+#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1)) -+ -+#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE)) -+#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE)) -+ -+#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE)) -+#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE)) -+ -+#define SSP_GPIO_INT IRQ_GPIO -+ -+#ifndef CONFIG_SL3516_ASIC -+#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin -+ -+#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */ -+#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */ -+#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/ -+#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/ -+#define GPIO_MISO_BIT 9 -+#else -+#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin -+ -+//#if 0 -+//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */ -+//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */ -+//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/ -+//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/ -+//#define GPIO_MISO_BIT 29 -+//#else -+//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */ -+//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */ -+//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/ -+//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/ -+//#define GPIO_MISO_BIT 7 -+//#endif -+#endif -+ -+ -+enum GPIO_REG -+{ -+ GPIO_DATA_OUT = 0x00, -+ GPIO_DATA_IN = 0x04, -+ GPIO_PIN_DIR = 0x08, -+ GPIO_BY_PASS = 0x0c, -+ GPIO_DATA_SET = 0x10, -+ GPIO_DATA_CLEAR = 0x14, -+ GPIO_INT_ENABLE = 0x20, -+ GPIO_INT_RAWSTATE = 0x24, -+ GPIO_INT_MASKSTATE = 0x28, -+ GPIO_INT_MASK = 0x2C, -+ GPIO_INT_CLEAR = 0x30, -+ GPIO_INT_TRIGGER = 0x34, -+ GPIO_INT_BOTH = 0x38, -+ GPIO_INT_POLARITY = 0x3C -+}; -+ -+typedef struct -+{ -+ UINT32 src_addr; -+ UINT32 dst_addr; -+ UINT32 llp; -+ UINT32 ctrl_size; -+ UINT32 owner; -+}DMA_LLP_t; -+ -+typedef struct -+{ -+ UINT32 owner; -+ UINT32 src_addr; -+ UINT32 ctrl_size; -+}IOCTL_LLP_t; -+ -+typedef unsigned char byte; -+typedef unsigned short word; -+typedef unsigned long dword; -+ -+/* DMA Registers */ -+#define DMA_INT 0x00000000 -+#define DMA_INT_TC 0x00000004 -+#define DMA_CFG 0x00000024 -+#define DMA_INT_TC_CLR 0x00000008 -+#define DMA_TC 0x00000014 -+#define DMA_CSR 0x00000024 -+#define DMA_SYNC 0x00000028 -+ -+#define DMA_CH2_CSR 0x00000140 -+#define DMA_CH2_CFG 0x00000144 -+#define DMA_CH2_SRC_ADDR 0x00000148 -+#define DMA_CH2_DST_ADDR 0x0000014c -+#define DMA_CH2_LLP 0x00000150 -+#define DMA_CH2_SIZE 0x00000154 -+ -+#define DMA_CH3_CSR 0x00000160 -+#define DMA_CH3_CFG 0x00000164 -+#define DMA_CH3_SRC_ADDR 0x00000168 -+#define DMA_CH3_DST_ADDR 0x0000016c -+#define DMA_CH3_LLP 0x00000170 -+#define DMA_CH3_SIZE 0x00000174 -+ -+#define SSP_DEVICE_ID 0x00 -+#define SSP_CTRL_STATUS 0x04 -+#define SSP_FRAME_CTRL 0x08 -+#define SSP_BAUD_RATE 0x0c -+#define SSP_FRAME_CTRL2 0x10 -+#define SSP_FIFO_CTRL 0x14 -+#define SSP_TX_SLOT_VALID0 0x18 -+#define SSP_TX_SLOT_VALID1 0x1c -+#define SSP_TX_SLOT_VALID2 0x20 -+#define SSP_TX_SLOT_VALID3 0x24 -+#define SSP_RX_SLOT_VALID0 0x28 -+#define SSP_RX_SLOT_VALID1 0x2c -+#define SSP_RX_SLOT_VALID2 0x30 -+#define SSP_RX_SLOT_VALID3 0x34 -+#define SSP_SLOT_SIZE0 0x38 -+#define SSP_SLOT_SIZE1 0x3c -+#define SSP_SLOT_SIZE2 0x40 -+#define SSP_SLOT_SIZE3 0x44 -+#define SSP_READ_PORT 0x48 -+#define SSP_WRITE_PORT 0x4c -+ -+ -+ -+#define SSP_I2S_INIT_BUF _IO ('q', 0x00) -+#define SSP_I2S_STOP_DMA _IO ('q', 0x01) -+#define SSP_I2S_FILE_LEN _IOW ('q', 0x2, int) -+/* -+#define SSP_GET_HOOK_STATUS _IOR ('q', 0xC0, int) -+#define SSP_GET_LINEFEED _IOR ('q', 0xC1, int) -+#define SSP_SET_LINEFEED _IOW ('q', 0xC2, int) -+#define SSP_GET_REG _IOWR ('q', 0xC3, struct Ssp_reg *) -+#define SSP_SET_REG _IOWR ('q', 0xC4, struct Ssp_reg *) -+#define SSP_GEN_OFFHOOK_TONE _IO ('q', 0xC5) -+#define SSP_GEN_BUSY_TONE _IO ('q', 0xC6) -+#define SSP_GEN_RINGBACK_TONE _IO ('q', 0xC7) -+#define SSP_GEN_CONGESTION_TONE _IO ('q', 0xC8) -+#define SSP_DISABLE_DIALTONE _IO ('q', 0xC9) -+#define SSP_PHONE_RING_START _IO ('q', 0xCA) -+*/ -+ -+ -+#endif //__GEMINI_I2S_H__ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/gemini_ssp.h -@@ -0,0 +1,263 @@ -+/****************************************************************************** -+ * gemini_ssp.h -+ * -+ * -+ *****************************************************************************/ -+ -+#include -+#include -+#include -+#include -+//#include "proslic.h" -+ -+typedef __u16 UINT16; -+typedef __u32 UINT32; -+typedef __u8 UINT8; -+typedef __u8 BOOL; -+ -+#define TRUE 1 -+#define FALSE 0 -+ -+/***************************************/ -+/* define GPIO module base address */ -+/***************************************/ -+#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE)) -+#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE)) -+#define SSP_INT IRQ_SSP -+#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) -+#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1)) -+#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE)) -+ -+/* define read/write register utility */ -+#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE)) -+#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE)) -+ -+#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR)) -+#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR)) -+ -+#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1)) -+#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1)) -+ -+#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE)) -+#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE)) -+ -+#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE)) -+#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE)) -+ -+ -+#define SSP_GPIO_INT IRQ_GPIO -+ -+#ifndef CONFIG_SL3516_ASIC -+#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin -+ -+#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */ -+#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */ -+#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/ -+#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/ -+#define GPIO_MISO_BIT 9 -+#else -+#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin -+ -+//#if 0 -+//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */ -+//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */ -+//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/ -+//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/ -+//#define GPIO_MISO_BIT 29 -+//#else -+//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */ -+//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */ -+//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/ -+//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/ -+//#define GPIO_MISO_BIT 7 -+//#endif -+#endif -+ -+ -+enum GPIO_REG -+{ -+ GPIO_DATA_OUT = 0x00, -+ GPIO_DATA_IN = 0x04, -+ GPIO_PIN_DIR = 0x08, -+ GPIO_BY_PASS = 0x0c, -+ GPIO_DATA_SET = 0x10, -+ GPIO_DATA_CLEAR = 0x14, -+ GPIO_INT_ENABLE = 0x20, -+ GPIO_INT_RAWSTATE = 0x24, -+ GPIO_INT_MASKSTATE = 0x28, -+ GPIO_INT_MASK = 0x2C, -+ GPIO_INT_CLEAR = 0x30, -+ GPIO_INT_TRIGGER = 0x34, -+ GPIO_INT_BOTH = 0x38, -+ GPIO_INT_POLARITY = 0x3C -+}; -+ -+ -+#define SPI_ADD_LEN 7 // bits of Address -+#define SPI_DAT_LEN 8 // bits of Data -+ -+ -+ -+//#ifdef MIDWAY_DIAG -+#define DAISY_MODE 1 -+#if (DAISY_MODE==1) -+#define NUMBER_OF_CHAN 2 -+#else -+#define NUMBER_OF_CHAN 1 -+#endif -+#define LLP_SIZE 8 -+#define SBUF_SIZE 512 //0xff0 //2560 -+#define DBUF_SIZE SBUF_SIZE*NUMBER_OF_CHAN //0xff0 //2560 -+#define TBUF_SIZE (LLP_SIZE)*DBUF_SIZE -+#define DESC_NUM 1 -+#define DTMF_NUM 20 -+ -+/* define owner bit of SSP */ -+//data into SSP and transfer to AP==> SSP_Rx -+//data out of SSP and transfer to SLIC==> SSP_Tx -+#define CPU 0 -+#define DMA 1 -+ -+#define DMA_DEMO 0 -+#define DMA_NDEMO 1 -+//#define DMA_NONE 2 -+ -+enum exceptions { -+ PROSLICiNSANE, -+ TIMEoUTpOWERuP, -+ TIMEoUTpOWERdOWN, -+ POWERlEAK, -+ TIPoRrINGgROUNDsHORT, -+ POWERaLARMQ1, -+ POWERaLARMQ2, -+ POWERaLARMQ3, -+ POWERaLARMQ4, -+ POWERaLARMQ5, -+ OWERaLARMQ6, -+ CM_CAL_ERR -+}; -+ -+typedef struct -+{ -+ UINT32 src_addr; -+ UINT32 dst_addr; -+ UINT32 llp; -+ UINT32 ctrl_size; -+}DMA_LLP_t; -+ -+typedef struct { -+ unsigned int own ; -+ char *tbuf; -+ //UINT32 *LinkAddrT; -+ DMA_LLP_t LLPT[LLP_SIZE]; -+}DMA_Tx_t; -+ -+typedef struct { -+ unsigned int own ; -+ char *rbuf; -+ //UINT32 *LinkAddrR; -+ DMA_LLP_t LLPR[LLP_SIZE]; -+}DMA_Rx_t; -+ -+//typedef struct { -+// //UINT32 init_stat; -+// struct chipStruct chipData ; /* Represents a proslics state, cached information, and timers */ -+// struct phone_device p; -+// -+// -+//}SSP_SLIC; -+ -+ -+ -+/* DMA Registers */ -+#define DMA_INT 0x00000000 -+#define DMA_INT_TC 0x00000004 -+#define DMA_CFG 0x00000024 -+#define DMA_INT_TC_CLR 0x00000008 -+#define DMA_TC 0x00000014 -+#define DMA_CSR 0x00000024 -+#define DMA_SYNC 0x00000028 -+ -+#define DMA_CH2_CSR 0x00000140 -+#define DMA_CH2_CFG 0x00000144 -+#define DMA_CH2_SRC_ADDR 0x00000148 -+#define DMA_CH2_DST_ADDR 0x0000014c -+#define DMA_CH2_LLP 0x00000150 -+#define DMA_CH2_SIZE 0x00000154 -+ -+#define DMA_CH3_CSR 0x00000160 -+#define DMA_CH3_CFG 0x00000164 -+#define DMA_CH3_SRC_ADDR 0x00000168 -+#define DMA_CH3_DST_ADDR 0x0000016c -+#define DMA_CH3_LLP 0x00000170 -+#define DMA_CH3_SIZE 0x00000174 -+ -+#define SSP_DEVICE_ID 0x00 -+#define SSP_CTRL_STATUS 0x04 -+#define SSP_FRAME_CTRL 0x08 -+#define SSP_BAUD_RATE 0x0c -+#define SSP_FRAME_CTRL2 0x10 -+#define SSP_FIFO_CTRL 0x14 -+#define SSP_TX_SLOT_VALID0 0x18 -+#define SSP_TX_SLOT_VALID1 0x1c -+#define SSP_TX_SLOT_VALID2 0x20 -+#define SSP_TX_SLOT_VALID3 0x24 -+#define SSP_RX_SLOT_VALID0 0x28 -+#define SSP_RX_SLOT_VALID1 0x2c -+#define SSP_RX_SLOT_VALID2 0x30 -+#define SSP_RX_SLOT_VALID3 0x34 -+#define SSP_SLOT_SIZE0 0x38 -+#define SSP_SLOT_SIZE1 0x3c -+#define SSP_SLOT_SIZE2 0x40 -+#define SSP_SLOT_SIZE3 0x44 -+#define SSP_READ_PORT 0x48 -+#define SSP_WRITE_PORT 0x4c -+ -+ -+void printFreq_Revision(int num); -+void SLIC_SPI_write(int num, UINT8 ,UINT8); -+UINT8 SLIC_SPI_read(int num, UINT8); -+void SLIC_SPI_write_bit(char); -+void SLIC_SPI_ind_write(int num, UINT8, UINT16); -+UINT16 SLIC_SPI_ind_read(int num, UINT8); -+void SLIC_SPI_CS_enable(UINT8); -+unsigned int SLIC_SPI_read_bit(void); -+void SLIC_SPI_pre_st(void); -+UINT32 ssp_init(void); -+UINT16 SLIC_SPI_get_identifier(int num); -+int selfTest(int num); -+void exception (int num, enum exceptions e); -+int SLIC_init(int num); -+UINT8 version(int num); -+UINT8 chipType (int num); -+void SLIC_init_ind_reg_set(int num); -+UINT8 powerUp(int num); -+UINT8 powerLeakTest(int num); -+void SLIC_init_reg_set(int num); -+int calibrate(int num); -+void goActive(int num); -+void clearInterrupts(int num); -+void setState(int num, int); -+UINT8 loopStatus(int num); -+int verifyIndirectRegisters(int num); -+int verifyIndirectReg(int num, UINT8 , UINT16); -+void sendProSLICID(int num); -+void disableOscillators(int num); -+UINT8 checkSum(int num, char * string ); -+void fskInitialization (int num); -+void fskByte(int num, UINT8 c); -+void waitForInterrupt (int num); -+//void findNumber(void); -+UINT8 dtmfAction(int num); -+UINT8 digit(int num); -+void interrupt_init(void); -+//void gemini_slic_isr (int ); -+int groundShort(int num); -+void clearAlarmBits(int num); -+void stopRinging(int num); -+void activateRinging(int num); -+void initializeLoopDebounceReg(int num); -+void busyJapan(int num) ; -+void ringBackJapan(int num) ; -+void stateMachine(int num); -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/hardware.h -@@ -0,0 +1,47 @@ -+/* -+ * linux/include/asm-arm/arch-epxa10/hardware.h -+ * -+ * This file contains the hardware definitions of the Integrator. -+ * -+ * Copyright (C) 1999 ARM Limited. -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_HARDWARE_H -+#define __ASM_ARCH_HARDWARE_H -+ -+#include -+ -+#define pcibios_assign_all_busses() 1 -+ -+/* -+ * Where in virtual memory the IO devices (timers, system controllers -+ * and so on) -+ * -+ * macro to get at IO space when running virtually -+*/ -+ -+#define IO_ADDRESS(x) (((x&0xfff00000)>>4)|(x & 0x000fffff)|0xF0000000) -+#define FLASH_VBASE 0xFE000000 -+#define FLASH_SIZE 0x1000000// 8M -+#define FLASH_START SL2312_FLASH_BASE -+#define FLASH_VADDR(x) ((x & 0x00ffffff)|0xFE000000) // flash virtual address -+ -+#define PCIBIOS_MIN_IO 0x100 // 0x000-0x100 AHB reg and PCI config, data -+#define PCIBIOS_MIN_MEM 0 -+ -+#endif -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/int_ctrl.h -@@ -0,0 +1,171 @@ -+/* -+ * -+ * This file contains the register definitions for the Excalibur -+ * Timer TIMER00. -+ * -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __INT_CTRL_H -+#define __INT_CTRL_H -+ -+#define PCI_IRQ_OFFSET 64 /* PCI start IRQ number */ -+#define FIQ_OFFSET 32 -+ -+#define IRQ_SOURCE(base_addr) (INT_CTRL_TYPE(base_addr + 0x00)) -+#define IRQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x04 )) -+#define IRQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x08 )) -+#define IRQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x0C )) -+#define IRQ_TLEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x10 )) -+#define IRQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x14 )) -+#define FIQ_SOURCE(base_addr) (INT_CTRL_TYPE (base_addr + 0x20 )) -+#define FIQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x24 )) -+#define FIQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x28 )) -+#define FIQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x2C )) -+#define FIQ_LEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x30 )) -+#define FIQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x34 )) -+ -+#ifdef CONFIG_SL3516_ASIC -+#define IRQ_SERIRQ0_OFFSET 30 -+#define IRQ_PCID_OFFSET 29 -+#define IRQ_PCIC_OFFSET 28 -+#define IRQ_PCIB_OFFSET 27 -+#define IRQ_PWR_OFFSET 26 -+#define IRQ_CIR_OFFSET 25 -+#define IRQ_GPIO2_OFFSET 24 -+#define IRQ_GPIO1_OFFSET 23 -+#define IRQ_GPIO_OFFSET 22 -+#define IRQ_SSP_OFFSET 21 -+#define IRQ_LPC_OFFSET 20 -+#define IRQ_LCD_OFFSET 19 -+#define IRQ_UART_OFFSET 18 -+#define IRQ_RTC_OFFSET 17 -+#define IRQ_TIMER3_OFFSET 16 -+#define IRQ_TIMER2_OFFSET 15 -+#define IRQ_TIMER1_OFFSET 14 -+#define IRQ_FLASH_OFFSET 12 -+#define IRQ_USB1_OFFSET 11 -+#define IRQ_USB0_OFFSET 10 -+#define IRQ_DMA_OFFSET 9 -+#define IRQ_PCI_OFFSET 8 -+#define IRQ_IPSEC_OFFSET 7 -+#define IRQ_RAID_OFFSET 6 -+#define IRQ_IDE1_OFFSET 5 -+#define IRQ_IDE0_OFFSET 4 -+#define IRQ_WATCHDOG_OFFSET 3 -+#define IRQ_GMAC1_OFFSET 2 -+#define IRQ_GMAC0_OFFSET 1 -+#define IRQ_CPU0_IP_IRQ_OFFSET 0 -+ -+#define IRQ_SERIRQ0_MASK (1<<30) -+#define IRQ_PCID_MASK (1<<29) -+#define IRQ_PCIC_MASK (1<<28) -+#define IRQ_PCIB_MASK (1<<27) -+#define IRQ_PWR_MASK (1<<26) -+#define IRQ_CIR_MASK (1<<25) -+#define IRQ_GPIO2_MASK (1<<24) -+#define IRQ_GPIO1_MASK (1<<23) -+#define IRQ_GPIO_MASK (1<<22) -+#define IRQ_SSP_MASK (1<<21) -+#define IRQ_LPC_MASK (1<<20) -+#define IRQ_LCD_MASK (1<<19) -+#define IRQ_UART_MASK (1<<18) -+#define IRQ_RTC_MASK (1<<17) -+#define IRQ_TIMER3_MASK (1<<16) -+#define IRQ_TIMER2_MASK (1<<15) -+#define IRQ_TIMER1_MASK (1<<14) -+#define IRQ_FLASH_MASK (1<<12) -+#define IRQ_USB1_MASK (1<<11) -+#define IRQ_USB0_MASK (1<<10) -+#define IRQ_DMA_MASK (1<< 9) -+#define IRQ_PCI_MASK (1<< 8) -+#define IRQ_IPSEC_MASK (1<< 7) -+#define IRQ_RAID_MASK (1<< 6) -+#define IRQ_IDE1_MASK (1<< 5) -+#define IRQ_IDE0_MASK (1<< 4) -+#define IRQ_WATCHDOG_MASK (1<< 3) -+#define IRQ_GMAC1_MASK (1<< 2) -+#define IRQ_GMAC0_MASK (1<< 1) -+#define IRQ_CPU0_IP_IRQ_MASK (1<< 0) -+#else -+#define IRQ_SERIRQ0_OFFSET 30 -+#define IRQ_PCID_OFFSET 29 -+#define IRQ_PCIC_OFFSET 28 -+#define IRQ_PCIB_OFFSET 27 -+#define IRQ_PWR_OFFSET 26 -+#define IRQ_CIR_OFFSET 25 -+#define IRQ_GPIO2_OFFSET 24 -+#define IRQ_GPIO1_OFFSET 23 -+#define IRQ_GPIO_OFFSET 22 -+#define IRQ_SSP_OFFSET 21 -+#define IRQ_LPC_OFFSET 20 -+#define IRQ_LCD_OFFSET 19 -+#define IRQ_UART_OFFSET 18 -+#define IRQ_RTC_OFFSET 17 -+#define IRQ_TIMER3_OFFSET 16 -+#define IRQ_TIMER2_OFFSET 15 -+#define IRQ_TIMER1_OFFSET 14 -+#define IRQ_FLASH_OFFSET 12 -+#define IRQ_USB1_OFFSET 11 -+#define IRQ_USB0_OFFSET 10 -+#define IRQ_DMA_OFFSET 9 -+#define IRQ_PCI_OFFSET 8 -+#define IRQ_IPSEC_OFFSET 7 -+#define IRQ_RAID_OFFSET 6 -+#define IRQ_IDE1_OFFSET 5 -+#define IRQ_IDE0_OFFSET 4 -+#define IRQ_WATCHDOG_OFFSET 3 -+#define IRQ_GMAC1_OFFSET 2 -+#define IRQ_GMAC0_OFFSET 1 -+#define IRQ_CPU0_IP_IRQ_OFFSET 0 -+ -+#define IRQ_SERIRQ0_MASK (1<<30) -+#define IRQ_PCID_MASK (1<<29) -+#define IRQ_PCIC_MASK (1<<28) -+#define IRQ_PCIB_MASK (1<<27) -+#define IRQ_PWR_MASK (1<<26) -+#define IRQ_CIR_MASK (1<<25) -+#define IRQ_GPIO2_MASK (1<<24) -+#define IRQ_GPIO1_MASK (1<<23) -+#define IRQ_GPIO_MASK (1<<22) -+#define IRQ_SSP_MASK (1<<21) -+#define IRQ_LPC_MASK (1<<20) -+#define IRQ_LCD_MASK (1<<19) -+#define IRQ_UART_MASK (1<<18) -+#define IRQ_RTC_MASK (1<<17) -+#define IRQ_TIMER3_MASK (1<<16) -+#define IRQ_TIMER2_MASK (1<<15) -+#define IRQ_TIMER1_MASK (1<<14) -+#define IRQ_FLASH_MASK (1<<12) -+#define IRQ_USB1_MASK (1<<11) -+#define IRQ_USB0_MASK (1<<10) -+#define IRQ_DMA_MASK (1<< 9) -+#define IRQ_PCI_MASK (1<< 8) -+#define IRQ_IPSEC_MASK (1<< 7) -+#define IRQ_RAID_MASK (1<< 6) -+#define IRQ_IDE1_MASK (1<< 5) -+#define IRQ_IDE0_MASK (1<< 4) -+#define IRQ_WATCHDOG_MASK (1<< 3) -+#define IRQ_GMAC1_MASK (1<< 2) -+#define IRQ_GMAC0_MASK (1<< 1) -+#define IRQ_CPU0_IP_IRQ_MASK (1<< 0) -+#endif -+ -+ -+#endif /* __INT_CTRL_H */ -+ -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/io.h -@@ -0,0 +1,50 @@ -+/* -+ * linux/include/asm-arm/arch-epxa10db/io.h -+ * -+ * Copyright (C) 1999 ARM Limited -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARM_ARCH_IO_H -+#define __ASM_ARM_ARCH_IO_H -+ -+#define IO_SPACE_LIMIT 0xffffffff -+ -+ -+/* -+ * Generic virtual read/write -+ */ -+/* -+#define __arch_getw(a) (*(volatile unsigned short *)(a)) -+#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) -+*/ -+/*#define outsw __arch_writesw -+#define outsl __arch_writesl -+#define outsb __arch_writesb -+#define insb __arch_readsb -+#define insw __arch_readsw -+#define insl __arch_readsl*/ -+ -+#define __io(a) (a) -+#define __mem_pci(a) (a) -+/* -+#define __arch_getw(a) (*(volatile unsigned short *)(a)) -+#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) -+*/ -+#define iomem_valid_addr(off,size) (1) -+#define iomem_to_phys(off) (off) -+ -+ -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/ipi.h -@@ -0,0 +1,189 @@ -+/* -+ * linux/include/asm-arm/arch-sl2312/system.h -+ * -+ * Copyright (C) 1999 ARM Limited -+ * Copyright (C) 2000 Deep Blue Solutions Ltd -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_IPI_H -+#define __ASM_ARCH_IPI_H -+#include -+ -+//#define spin_lock(x) spin_lock_dt(x) -+//#define spin_unlock(x) spin_unlock_dt(x) -+ -+#define SWAP_OFFSET 0x400000 -+#define SWAP_SIZE 0x400000 -+ -+#define SHARE_MEM_ADDR 0x2000000 -+#define SHARE_MEM_SIZE 1024*1024 -+ -+ -+//--> Add by jason for IPI testing -+// memory layout for maste & slave bin -+#define MASTERTEXT 0x8000 -+#define SLAVETEXT 0x108000 -+#define SHARESIZE 0x4000 -+#define SHAREADDR SHARE_MEM_ADDR // starting 8M -+ -+// CPU1 reset release -+#define GLOBAL_BASE IO_ADDRESS(0x40000000) -+#define GLOBAL_SOFTRESET (GLOBAL_BASE + 0x0C) -+#define CPU1_RESET_BIT_MASK 0x40000000 -+ -+// IPI , need to redefine the folliwing, bug -+#define CPU0_STATUS (GLOBAL_BASE + 0x0038) -+#define CPU1_STATUS (GLOBAL_BASE + 0x003C) -+#define CPU_IPI_BIT_MASK 0x80000000 -+ -+/* Your basic SMP spinlocks, allowing only a single CPU anywhere -+*/ -+typedef struct { -+ volatile unsigned int lock; -+} spinlock_dt; -+ -+ -+#define MASTER_BIT 0x01 -+#define SLAVE_BIT 0x02 -+#define HEART_BIT 0x04 -+#define IPI0_IRQ_BIT 0x08 -+#define IPI0_FIQ_BIT 0x10 -+#define IPI1_IRQ_BIT 0x20 -+#define IPI1_FIQ_BIT 0x40 -+ -+#define IRQ 0 -+#define FIQ 1 -+#define DONE 0xff -+ -+#define CPU0 0x0 -+#define CPU1 0x1 -+ -+#define MAXCHAR 128*1024 -+typedef struct { -+ int flag; -+ int uart_flag; -+ int cnt; -+ spinlock_dt lk; -+ char message[MAXCHAR]; -+}s_mailbox; -+ -+// JScale proj definition -+typedef struct { -+ u16 type; // message Type -+ u16 length; // message length, including message header -+} IPC_MSG_HDR_T; -+ -+typedef struct{ -+ IPC_MSG_HDR_T hdr; -+ u32 input_location; -+ u32 input_size; -+ u32 output_location; -+ u16 ScaledImageWidth; -+ u16 ScaledImageHeight; -+ u8 ScaledImageQuality; -+ u8 MaintainResultionRatio; -+ u8 TwoStepScaling; -+ u8 InputFormat; -+ u8 verbose; -+ u8 reserved[3]; -+} JSCALE_REQ_T; -+ -+typedef struct{ -+ IPC_MSG_HDR_T hdr; -+ u32 status; -+ u32 code; -+ u32 output_size; -+} JSCALE_RSP_T; -+ -+#define IPC_JSCALE_REQ_MSG 0 // JScale request from CPU-0 to CPU-1 -+#define IPC_JSCALE_RSP_MSG 1 // JScale response from CPU-1 to CPU-0 -+ -+enum { -+ JSCALE_STATUS_OK = 0, -+ JSCALE_UNKNOWN_MSG_TYPE, -+ JSCALE_FAILED_FILE_SIZE, -+ JSCALE_FAILED_MALLOC, -+ JSCALE_FAILED_FORMAT, -+ JSCALE_DECODE_ERROR, -+ JSCALE_BUSY, -+}; -+// <-- JScale -+ -+#define GEMINI_IPI_IOCTL_BASE 'Z' -+#define GEMINI_IPI_JSCALE_REQ _IOW (GEMINI_IPI_IOCTL_BASE,0,JSCALE_REQ_T) -+#define GEMINI_IPI_JSCALE_STAT _IOR (GEMINI_IPI_IOCTL_BASE,1,JSCALE_RSP_T) -+ -+ -+/* -+* Simple spin lock operations. -+* -+*/ -+ -+#define spin_is_locked_dt(x)((x)->lock != 0) -+ -+static inline int test_and_set_dt(spinlock_dt *lock) -+{ -+unsigned long tmp; -+__asm__ __volatile__( -+"swp %0, %2, [%1]\n" -+: "=&r" (tmp) -+: "r" (&lock->lock), "r" (1) -+: "cc", "memory"); -+ -+return tmp; -+} -+ -+static inline void spin_lock_dt(spinlock_dt *lock) -+{ -+ -+unsigned long tmp; -+__asm__ __volatile__( -+"1: ldr %0, [%1]\n" -+"teq %0, #0\n" -+"swpeq %0, %2, [%1]\n" -+" teqeq %0, #0\n" -+" bne 1b" -+ : "=&r" (tmp) -+ : "r" (&lock->lock), "r" (1) -+ : "cc", "memory"); -+} -+ -+static inline void spin_unlock_dt(spinlock_dt *lock) -+{ -+ __asm__ __volatile__( -+" str %1, [%0]" -+ : -+ : "r" (&lock->lock), "r" (0) -+ : "cc", "memory"); -+} -+ -+static inline int getcpuid(void) -+{ -+ int cpuid; -+ -+ __asm__( -+"mrc p8, 0, r0, c0, c0, 0\n" -+"mov %0, r0" -+ :"=r"(cpuid) -+ : -+ :"r0"); -+ return (cpuid & 0x07); -+} -+ -+ -+ -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/irq.h -@@ -0,0 +1,23 @@ -+/* -+ * linux/include/asm-arm/arch-sl2312/irq.h -+ * -+ * Copyright (C) 1999 ARM Limited -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+ // Since we have PCI interrupt which the interrupt line is pseudo -+ // we need do some fixup -+int fixup_irq(int irq); ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/irqs.h -@@ -0,0 +1,102 @@ -+/* -+ * linux/include/asm-arm/arch-camelot/irqs.h -+ * -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+/* Use the Excalibur chip definitions */ -+#define INT_CTRL_TYPE -+#include "asm/arch/int_ctrl.h" -+ -+#ifdef CONFIG_SL3516_ASIC -+#define IRQ_SERIRQ_MAX 31 -+#define IRQ_SERIRQ1 31 -+#define IRQ_SERIRQ0 30 -+#define IRQ_PCID 29 -+#define IRQ_PCIC 28 -+#define IRQ_PCIB 27 -+#define IRQ_PWR 26 -+#define IRQ_CIR 25 -+#define IRQ_GPIO2 24 -+#define IRQ_GPIO1 23 -+#define IRQ_GPIO 22 -+#define IRQ_SSP 21 -+#define IRQ_LPC 20 -+#define IRQ_LCD 19 -+#define IRQ_UART 18 -+#define IRQ_RTC 17 -+#define IRQ_TIMER3 16 -+#define IRQ_TIMER2 15 -+#define IRQ_TIMER1 14 -+#define IRQ_FLASH 12 -+#define IRQ_USB1 11 -+#define IRQ_USB0 10 -+#define IRQ_DMA 9 -+#define IRQ_PCI 8 -+#define IRQ_IPSEC 7 -+#define IRQ_RAID 6 -+#define IRQ_IDE1 5 -+#define IRQ_IDE0 4 -+#define IRQ_WATCHDOG 3 -+#define IRQ_GMAC1 2 -+#define IRQ_GMAC0 1 -+#define IRQ_CPU0_IP_IRQ 0 -+#else -+#define IRQ_SERIRQ_MAX 31 -+#define IRQ_SERIRQ1 31 -+#define IRQ_SERIRQ0 30 -+#define IRQ_PCID 29 -+#define IRQ_PCIC 28 -+#define IRQ_PCIB 27 -+#define IRQ_PWR 26 -+#define IRQ_CIR 25 -+#define IRQ_GPIO2 24 -+#define IRQ_GPIO1 23 -+#define IRQ_GPIO 22 -+#define IRQ_SSP 21 -+#define IRQ_LPC 20 -+#define IRQ_LCD 19 -+#define IRQ_UART 18 -+#define IRQ_RTC 17 -+#define IRQ_TIMER3 16 -+#define IRQ_TIMER2 15 -+#define IRQ_TIMER1 14 -+#define IRQ_FLASH 12 -+#define IRQ_USB1 11 -+#define IRQ_USB0 10 -+#define IRQ_DMA 9 -+#define IRQ_PCI 8 -+#define IRQ_IPSEC 7 -+#define IRQ_RAID 6 -+#define IRQ_IDE1 5 -+#define IRQ_IDE0 4 -+#define IRQ_WATCHDOG 3 -+#define IRQ_GMAC1 2 -+#define IRQ_GMAC0 1 -+#endif -+ -+#define ARCH_TIMER_IRQ IRQ_TIMER2 /* for MV 4.0 */ -+ -+#define IRQ_PCI_INTA PCI_IRQ_OFFSET + 0 -+#define IRQ_PCI_INTB PCI_IRQ_OFFSET + 1 -+#define IRQ_PCI_INTC PCI_IRQ_OFFSET + 2 -+#define IRQ_PCI_INTD PCI_IRQ_OFFSET + 3 -+ -+#define NR_IRQS (IRQ_PCI_INTD + 4) -+ -+ -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/it8712.h -@@ -0,0 +1,24 @@ -+ -+#ifndef __IT8712_H__ -+#define __IT8712_H__ -+ -+#include "asm/arch/sl2312.h" -+ -+#define IT8712_IO_BASE SL2312_LPC_IO_BASE -+// Device LDN -+#define LDN_SERIAL1 0x01 -+#define LDN_SERIAL2 0x02 -+#define LDN_PARALLEL 0x03 -+#define LDN_KEYBOARD 0x05 -+#define LDN_MOUSE 0x06 -+#define LDN_GPIO 0x07 -+ -+#define IT8712_UART1_PORT 0x3F8 -+#define IT8712_UART2_PORT 0x2F8 -+ -+#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5 -+ -+void LPCSetConfig(char LdnNumber, char Index, char data); -+char LPCGetConfig(char LdnNumber, char Index); -+ -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/memory.h -@@ -0,0 +1,38 @@ -+/* -+ * linux/include/asm-arm/arch-sl2312/memory.h -+ * -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_MMU_H -+#define __ASM_ARCH_MMU_H -+ -+/* -+ * Physical DRAM offset. -+ */ -+#define PHYS_OFFSET UL(0x00000000) -+ -+/* -+ * Virtual view <-> DMA view memory address translations -+ * virt_to_bus: Used to translate the virtual address to an -+ * address suitable to be passed to set_dma_addr -+ * bus_to_virt: Used to convert an address for DMA operations -+ * to an address that the kernel can use. -+ */ -+#define __virt_to_bus(x) (x - PAGE_OFFSET + /*SDRAM_BASE*/0) -+#define __bus_to_virt(x) (x - /*SDRAM_BASE*/0 + PAGE_OFFSET) -+ -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/param.h -@@ -0,0 +1,20 @@ -+/* -+ * linux/include/asm-arm/arch-epxa10db/param.h -+ * -+ * Copyright (C) 1999 ARM Limited -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/pci.h -@@ -0,0 +1,18 @@ -+ -+#ifndef __SL2312_PCI_H__ -+#define __SL2312_PCI_H__ -+ -+#define SL2312_PCI_PMC 0x40 -+#define SL2312_PCI_PMCSR 0x44 -+#define SL2312_PCI_CTRL1 0x48 -+#define SL2312_PCI_CTRL2 0x4c -+#define SL2312_PCI_MEM1_BASE_SIZE 0x50 -+#define SL2312_PCI_MEM2_BASE_SIZE 0x54 -+#define SL2312_PCI_MEM3_BASE_SIZE 0x58 -+ -+ -+void sl2312_pci_mask_irq(unsigned int irq); -+void sl2312_pci_unmask_irq(unsigned int irq); -+int sl2312_pci_get_int_src(void); -+ -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/platform.h -@@ -0,0 +1,7 @@ -+#ifndef PLATFORM_H -+#define PLATFORM_H -+#include "sl2312.h" -+ -+#define MAXIRQNUM 68 -+#endif -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/preempt.h -@@ -0,0 +1,63 @@ -+/* -+ * include/asm-arm/arch-sl2312/preempt.h -+ * -+ * Timing support for preempt-stats, kfi, ilatency patches -+ * -+ * Author: dsingleton -+ * -+ * 2001-2004 (c) MontaVista Software, Inc. This file is licensed under -+ * the terms of the GNU General Public License version 2. This program -+ * is licensed "as is" without any warranty of any kind, whether express -+ * or implied. -+ */ -+ -+#ifndef _ASM_ARCH_PREEMT_H -+#define _ASM_ARCH_PREEMT_H -+ -+#include -+#include -+ -+static inline unsigned long clock_diff(unsigned long start, unsigned long stop) -+{ -+ return (start - stop); -+} -+ -+static inline unsigned int readclock(void) -+{ -+ unsigned int x; -+ -+ x = readl(IO_ADDRESS(SL2312_TIMER2_BASE)); -+ return x; -+} -+ -+static inline unsigned __ticks_per_usec(void) -+{ -+#ifdef CONFIG_SL3516_ASIC -+ unsigned int ahb_clock_rate_base=130; /* unit = MHz*/ -+ unsigned int reg_v=0; -+ unsigned int ticks_usec; -+ -+ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+4))); -+ reg_v >>=15; -+ ticks_usec = (ahb_clock_rate_base + (reg_v & 0x07)*10)>>2; -+ -+#else -+ unsigned int ticks_usec=20; -+#endif -+ -+ return ticks_usec; -+} -+ -+/* -+ * timer 1 runs @ 6Mhz 6 ticks = 1 microsecond -+ * and is configed as a count down timer. -+ */ -+#define TICKS_PER_USEC __ticks_per_usec() -+#define ARCH_PREDEFINES_TICKS_PER_USEC -+ -+#define clock_to_usecs(x) ((x) / TICKS_PER_USEC) -+ -+#define INTERRUPTS_ENABLED(x) (!(x & PSR_I_BIT)) -+ -+#endif -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/sl2312.h -@@ -0,0 +1,254 @@ -+#ifndef __sl2312_h -+#define __sl2312_h -+ -+/**************************************************************************** -+ * Copyright Storlink Corp 2002-2003. All rights reserved. * -+ *--------------------------------------------------------------------------* -+ * Name:board.s * -+ * Description: SL231x specfic define * -+ * Author: Plus Chen * -+ * Version: 0.9 Create -+ ****************************************************************************/ -+ -+/* -+ CPE address map; -+ -+ +==================================================== -+ 0x00000000 | FLASH -+ 0x0FFFFFFF | -+ |==================================================== -+ 0x10000000 | SDRAM -+ 0x1FFFFFFF | -+ |==================================================== -+ 0x20000000 | Global Registers 0x20000000-0x20FFFFFF -+ | EMAC and DMA 0x21000000-0x21FFFFFF -+ | UART Module 0x22000000-0x22FFFFFF -+ | Timer Module 0x23000000-0x23FFFFFF -+ | Interrupt Module 0x24000000-0x24FFFFFF -+ | RTC Module 0x25000000-0x25FFFFFF -+ | LPC Host Controller 0x26000000-0x26FFFFFF -+ | LPC Peripherial IO 0x27000000-0x27FFFFFF -+ | WatchDog Timer 0x28000000-0x28FFFFFF -+ 0x2FFFFFFF | Reserved 0x29000000-0x29FFFFFF -+ |===================================================== -+ 0x30000000 | PCI IO, Configuration Registers -+ 0x3FFFFFFF | -+ |===================================================== -+ 0x40000000 | PCI Memory -+ 0x4FFFFFFF | -+ |===================================================== -+ 0x50000000 | Ethernet MAC and DMA 0x50000000-0x50FFFFFF -+ | Security and DMA 0x51000000-0x51FFFFFF -+ | IDE Channel 0 Register 0x52000000-0x527FFFFF -+ | IDE Channel 1 Register 0x52800000-0x52FFFFFF -+ | USB Register 0x53000000-0x53FFFFFF -+ | Flash Controller 0x54000000-0x54FFFFFF -+ | DRAM Controller 0x55000000-0x55FFFFFF -+ 0x5FFFFFFF | Reserved 0x56000000-0x5FFFFFFF -+ |===================================================== -+ 0x60000000 | Reserved -+ 0x6FFFFFFF | -+ |===================================================== -+ 0x70000000 | FLASH shadow Memory -+ 0x7FFFFFFF | -+ |===================================================== -+ 0x80000000 | Big Endian of memory 0x00000000-0x7FFFFFFF -+ 0xFFFFFFFF | -+ +===================================================== -+*/ -+ -+ -+ -+/*------------------------------------------------------------------------------- -+ Memory Map definitions -+-------------------------------------------------------------------------------- */ -+#define TEST 1 -+#if 0 -+ -+static inline int GETCPUID() -+{ -+ int cpuid; -+ __asm__( -+"mrc p8, 0, r0, c0, c0, 0\n" -+"mov %0, r0" -+ :"=r"(cpuid) -+ : -+ :"r0"); -+ return (cpuid & 0x07); -+} -+#endif -+#define SL2312_SRAM_BASE 0x70000000 // SRAM base after remap -+#define SL2312_DRAM_BASE 0x00000000 // DRAM base after remap -+#define SL2312_RAM_BASE 0x10000000 // RAM code base before remap -+#define SL2312_FLASH_BASE 0x30000000 -+#define SL2312_ROM_BASE 0x30000000 -+#define SL2312_GLOBAL_BASE 0x40000000 -+#define SL2312_WAQTCHDOG_BASE 0x41000000 -+#define SL2312_UART_BASE 0x42000000 -+#define SL2312_TIMER_BASE 0x43000000 -+#define SL2312_LCD_BASE 0x44000000 -+#define SL2312_RTC_BASE 0x45000000 -+#define SL2312_SATA_BASE 0x46000000 -+#define SL2312_LPC_HOST_BASE 0x47000000 -+#define SL2312_LPC_IO_BASE 0x47800000 -+// #define SL2312_INTERRUPT_BASE 0x48000000 -+#define SL2312_INTERRUPT0_BASE 0x48000000 -+#define SL2312_INTERRUPT1_BASE 0x49000000 -+//#define SL2312_INTERRUPT_BASE ((getcpuid()==0)?SL2312_INTERRUPT0_BASE:SL2312_INTERRUPT1_BASE) -+#define SL2312_INTERRUPT_BASE 0x48000000 -+#define SL2312_SSP_CTRL_BASE 0x4A000000 -+#define SL2312_POWER_CTRL_BASE 0x4B000000 -+#define SL2312_CIR_BASE 0x4C000000 -+#define SL2312_GPIO_BASE 0x4D000000 -+#define SL2312_GPIO_BASE1 0x4E000000 -+#define SL2312_GPIO_BASE2 0x4F000000 -+#define SL2312_PCI_IO_BASE 0x50000000 -+#define SL2312_PCI_MEM_BASE 0x58000000 -+#ifdef CONFIG_NET_SL351X -+#define SL2312_TOE_BASE 0x60000000 -+#define SL2312_GMAC0_BASE 0x6000A000 -+#define SL2312_GMAC1_BASE 0x6000E000 -+#else -+#define SL2312_GMAC0_BASE 0x60000000 -+#define SL2312_GMAC1_BASE 0x61000000 -+#endif -+#define SL2312_SECURITY_BASE 0x62000000 -+#define SL2312_IDE0_BASE 0x63000000 -+#define SL2312_IDE1_BASE 0x63400000 -+#define SL2312_RAID_BASE 0x64000000 -+#define SL2312_FLASH_CTRL_BASE 0x65000000 -+#define SL2312_DRAM_CTRL_BASE 0x66000000 -+#define SL2312_GENERAL_DMA_BASE 0x67000000 -+#define SL2312_USB_BASE 0x68000000 -+#define SL2312_USB0_BASE 0x68000000 -+#define SL2312_USB1_BASE 0x69000000 -+#define SL2312_FLASH_SHADOW 0x30000000 -+#define SL2312_BIG_ENDIAN_BASE 0x80000000 -+ -+#ifdef CONFIG_GEMINI_IPI -+#define CPU_1_MEM_BASE 0x4000000 // 64 MB -+#define CPU_1_DATA_OFFSET 0x4000000-0x300000 // Offset 61 MB -+#endif -+ -+#define SL2312_TIMER1_BASE SL2312_TIMER_BASE -+#define SL2312_TIMER2_BASE (SL2312_TIMER_BASE + 0x10) -+#define SL2312_TIMER3_BASE (SL2312_TIMER_BASE + 0x20) -+ -+#define SL2312_PCI_DMA_MEM1_BASE 0x00000000 -+#define SL2312_PCI_DMA_MEM2_BASE 0x00000000 -+#define SL2312_PCI_DMA_MEM3_BASE 0x00000000 -+#define SL2312_PCI_DMA_MEM1_SIZE 7 -+#define SL2312_PCI_DMA_MEM2_SIZE 6 -+#define SL2312_PCI_DMA_MEM3_SIZE 6 -+ -+/*------------------------------------------------------------------------------- -+ Global Module -+---------------------------------------------------------------------------------*/ -+#define GLOBAL_ID 0x00 -+#define GLOBAL_CHIP_ID 0x002311 -+#define GLOBAL_CHIP_REV 0xA0 -+#define GLOBAL_STATUS 0x04 -+#define GLOBAL_CONTROL 0x1C -+#define GLOBAL_REMAP_BIT 0x01 -+#define GLOBAL_RESET_REG 0x0C -+#define GLOBAL_MISC_REG 0x30 -+#define PFLASH_SHARE_BIT 0x02 -+ -+#define GLOBAL_RESET (1<<31) -+#define RESET_CPU1 (1<<30) -+#define RESET_SATA1 (1<<27) -+#define RESET_SATA0 (1<<26) -+#define RESET_CIR (1<<25) -+#define RESET_EXT_DEV (1<<24) -+#define RESET_WD (1<<23) -+#define RESET_GPIO2 (1<<22) -+#define RESET_GPIO1 (1<<21) -+#define RESET_GPIO0 (1<<20) -+#define RESET_SSP (1<<19) -+#define RESET_UART (1<<18) -+#define RESET_TIMER (1<<17) -+#define RESET_RTC (1<<16) -+#define RESET_INT0 (1<<15) -+#define RESET_INT1 (1<<14) -+#define RESET_LCD (1<<13) -+#define RESET_LPC (1<<12) -+#define RESET_APB (1<<11) -+#define RESET_DMA (1<<10) -+#define RESET_USB1 (1<<9 ) -+#define RESET_USB0 (1<<8 ) -+#define RESET_PCI (1<<7 ) -+#define RESET_GMAC1 (1<<6 ) -+#define RESET_GMAC0 (1<<5 ) -+#define RESET_IPSEC (1<<4 ) -+#define RESET_RAID (1<<3 ) -+#define RESET_IDE (1<<2 ) -+#define RESET_FLASH (1<<1 ) -+#define RESET_DRAM (1<<0 ) -+ -+ -+ -+ -+ -+ -+ -+ -+/*------------------------------------------------------------------------------- -+ DRAM Module -+---------------------------------------------------------------------------------*/ -+#define DRAM_SIZE_32M 0x2000000 -+#define DRAM_SIZE_64M 0x4000000 -+#define DRAM_SIZE_128M 0x8000000 -+ -+#define DRAM_SIZE DRAM_SIZE_128M -+ -+#define DRAM_SDRMR 0x00 -+#define SDRMR_DISABLE_DLL 0x80010000 -+ -+/*------------------------------------------------------------------------------ -+ Share Pin Flag -+--------------------------------------------------------------------------------*/ -+#ifdef CONFIG_SL2312_SHARE_PIN -+#define FLASH_SHARE_BIT 0 -+#define UART_SHARE_BIT 1 -+#define EMAC_SHARE_BIT 2 -+#define IDE_RW_SHARE_BIT 3 -+#define IDE_CMD_SHARE_BIT 4 -+#endif -+/*------------------------------------------------------------------------------- -+ System Clock -+---------------------------------------------------------------------------------*/ -+ -+#ifndef SYS_CLK -+#ifdef CONFIG_SL3516_ASIC -+#define SYS_CLK 150000000 -+#else -+#define SYS_CLK 20000000 -+#endif -+#endif -+ -+#define AHB_CLK SYS_CLK -+#define MAX_TIMER 3 -+#ifndef APB_CLK -+#ifdef CONFIG_SL3516_ASIC -+#define APB_CLK (SYS_CLK / 6) -+#else -+#define APB_CLK SYS_CLK -+#endif -+#endif -+ -+#ifdef CONFIG_SL3516_ASIC -+#define UART_CLK 48000000 // 30000000 for GeminiA chip, else 48000000 -+#else -+#define UART_CLK 48000000 -+#endif -+ -+#define SL2312_BAUD_115200 (UART_CLK / 1843200) -+#define SL2312_BAUD_57600 (UART_CLK / 921600) -+#define SL2312_BAUD_38400 (UART_CLK / 614400) -+#define SL2312_BAUD_19200 (UART_CLK / 307200) -+#define SL2312_BAUD_14400 (UART_CLK / 230400) -+#define SL2312_BAUD_9600 (UART_CLK / 153600) -+ -+#endif -+ -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/sl2312_ipsec.h -@@ -0,0 +1,684 @@ -+#ifndef _IPSEC_DIAG_H -+#define _IPSEC_DIAG_H -+ -+#include -+ -+#define BIG_ENDIAN 0 -+ -+#define IPSEC_TEST 0 -+#define ZERO_COPY 1 -+ -+#define UINT unsigned int -+#define BYTE unsigned char -+ -+/* define cipher algorithm */ -+enum CIPHER { -+ DES_ECB_E =20, -+ TDES_ECB_E =21, -+ AES_ECB_E =22, -+ DES_CBC_E =24, -+ TDES_CBC_E =25, -+ AES_CBC_E =26, -+ -+ DES_ECB_D =27, -+ TDES_ECB_D =28, -+ AES_ECB_D =29, -+ DES_CBC_D =31, -+ TDES_CBC_D =32, -+ AES_CBC_D =33, -+ A_SHA1 =12, -+ A_HMAC_SHA1 =13, -+ A_MD5 =14, -+ A_HMAC_MD5 =15, -+}; -+ -+// opMode -+#define CIPHER_ENC 0x1 -+#define CIPHER_DEC 0x3 -+#define AUTH 0x4 -+#define ENC_AUTH 0x5 -+#define AUTH_DEC 0x7 -+ -+// cipherAlgorithm -+#define CBC_DES 0x4 -+#define CBC_3DES 0x5 -+#define CBC_AES 0x6 -+#define ECB_DES 0x0 -+#define ECB_3DES 0x1 -+#define ECB_AES 0x2 -+ -+// authAlgorithm -+#define SHA1 0 -+#define MD5 1 -+#define HMAC_SHA1 2 -+#define HMAC_MD5 3 -+#define FCS 4 -+ -+//cipher mode -+#define ECB 0 -+#define CBC 1 -+ -+// authMode -+#define AUTH_APPEND 0 -+#define AUTH_CHKVAL 1 -+ -+/******************************************************/ -+/* the offset of IPSEC DMA register */ -+/******************************************************/ -+enum IPSEC_DMA_REGISTER { -+ IPSEC_DMA_DEVICE_ID = 0xff00, -+ IPSEC_DMA_STATUS = 0xff04, -+ IPSEC_TXDMA_CTRL = 0xff08, -+ IPSEC_TXDMA_FIRST_DESC = 0xff0c, -+ IPSEC_TXDMA_CURR_DESC = 0xff10, -+ IPSEC_RXDMA_CTRL = 0xff14, -+ IPSEC_RXDMA_FIRST_DESC = 0xff18, -+ IPSEC_RXDMA_CURR_DESC = 0xff1c, -+ IPSEC_TXDMA_BUF_ADDR = 0xff28, -+ IPSEC_RXDMA_BUF_ADDR = 0xff38, -+ IPSEC_RXDMA_BUF_SIZE = 0xff30, -+}; -+ -+#define IPSEC_STATUS_REG 0x00a8 -+#define IPSEC_RAND_NUM_REG 0x00ac -+ -+/******************************************************/ -+/* the field definition of IPSEC DMA Module Register */ -+/******************************************************/ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff00 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int p_wclk : 4; /* DMA_APB write clock period */ -+ unsigned int p_rclk : 4; /* DMA_APB read clock period */ -+ unsigned int : 8; -+ unsigned int device_id : 12; -+ unsigned int revision_id : 4; -+#else -+ unsigned int revision_id : 4; -+ unsigned int device_id : 12; -+ unsigned int : 8; -+ unsigned int p_rclk : 4; /* DMA_APB read clock period */ -+ unsigned int p_wclk : 4; /* DMA_APB write clock period */ -+#endif -+ } bits; -+} IPSEC_DMA_DEVICE_ID_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff04 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int ts_finish : 1; /* finished tx interrupt */ -+ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ -+ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ -+ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ -+ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ -+ unsigned int rs_finish : 1; /* finished rx interrupt */ -+ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ -+ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ -+ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ -+ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ -+ unsigned int intr : 8; /* Peripheral interrupt */ -+ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */ -+ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */ -+ unsigned int : 3; -+ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ -+ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */ -+#else -+ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */ -+ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ -+ unsigned int : 3; -+ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */ -+ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */ -+ unsigned int intr : 8; /* Peripheral interrupt */ -+ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ -+ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ -+ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ -+ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ -+ unsigned int rs_finish : 1; /* finished rx interrupt */ -+ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ -+ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ -+ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ -+ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ -+ unsigned int ts_finish : 1; /* finished tx interrupt */ -+#endif -+ } bits; -+} IPSEC_DMA_STATUS_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff08 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int td_start : 1; /* Start DMA transfer */ -+ unsigned int td_continue : 1; /* Continue DMA operation */ -+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int : 1; -+ unsigned int td_prot : 4; /* TxDMA protection control */ -+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ -+ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ -+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int : 14; -+#else -+ unsigned int : 14; -+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ -+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ -+ unsigned int td_prot : 4; /* TxDMA protection control */ -+ unsigned int : 1; -+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int td_continue : 1; /* Continue DMA operation */ -+ unsigned int td_start : 1; /* Start DMA transfer */ -+#endif -+ } bits; -+} IPSEC_TXDMA_CTRL_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff0c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int td_first_des_ptr : 28;/* first descriptor address */ -+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ -+ unsigned int : 3; -+#else -+ unsigned int : 3; -+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ -+ unsigned int td_first_des_ptr : 28;/* first descriptor address */ -+#endif -+ } bits; -+} IPSEC_TXDMA_FIRST_DESC_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff10 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int ndar : 28; /* next descriptor address */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ -+ unsigned int sof_eof : 2; -+#else -+ unsigned int sof_eof : 2; -+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int ndar : 28; /* next descriptor address */ -+#endif -+ } bits; -+} IPSEC_TXDMA_CURR_DESC_T; -+ -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff14 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int rd_start : 1; /* Start DMA transfer */ -+ unsigned int rd_continue : 1; /* Continue DMA operation */ -+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int : 1; -+ unsigned int rd_prot : 4; /* DMA protection control */ -+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ -+ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ -+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int : 14; -+#else -+ unsigned int : 14; -+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ -+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ -+ unsigned int rd_prot : 4; /* DMA protection control */ -+ unsigned int : 1; -+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int rd_continue : 1; /* Continue DMA operation */ -+ unsigned int rd_start : 1; /* Start DMA transfer */ -+#endif -+ } bits; -+} IPSEC_RXDMA_CTRL_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff18 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ -+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ -+ unsigned int : 3; -+#else -+ unsigned int : 3; -+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ -+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ -+#endif -+ } bits; -+} IPSEC_RXDMA_FIRST_DESC_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff1c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int ndar : 28; /* next descriptor address */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ -+ unsigned int sof_eof : 2; -+#else -+ unsigned int sof_eof : 2; -+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int ndar : 28; /* next descriptor address */ -+#endif -+ } bits; -+} IPSEC_RXDMA_CURR_DESC_T; -+ -+ -+ -+/******************************************************/ -+/* the field definition of IPSEC module Register */ -+/******************************************************/ -+typedef union -+{ -+ unsigned int id; -+ struct bit_0000 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int device_id : 28; -+ unsigned int revision_id : 4; -+#else -+ unsigned int revision_id : 4; -+ unsigned int device_id : 28; -+#endif -+ } bits; -+} IPSEC_ID_T; -+ -+typedef union -+{ -+ unsigned int control; -+ struct bit_0004 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */ -+ unsigned int : 1; -+ unsigned int cipher_algorithm : 3; -+ unsigned int aesnk : 4; /* AES Key Size */ -+ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */ -+ unsigned int : 2; -+ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */ -+ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */ -+ unsigned int auth_algorithm : 3; -+ unsigned int : 1; -+ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */ -+ /* by the authentication module */ -+ unsigned int process_id : 8; /* Used to identify process.This number will be */ -+ /* copied to the descriptor status of received packet*/ -+#else -+ unsigned int process_id : 8; /* Used to identify process.This number will be */ -+ /* copied to the descriptor status of received packet*/ -+ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */ -+ /* by the authentication module */ -+ unsigned int : 1; -+ unsigned int auth_algorithm : 3; -+ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */ -+ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */ -+ unsigned int : 2; -+ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */ -+ unsigned int aesnk : 4; /* AES Key Size */ -+ unsigned int cipher_algorithm : 3; -+ unsigned int : 1; -+ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */ -+#endif -+ } bits; -+} IPSEC_CONTROL_T; -+ -+ -+typedef union -+{ -+ unsigned int cipher_packet; -+ struct bit_0008 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */ -+ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */ -+#else -+ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */ -+ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */ -+#endif -+ } bits; -+} IPSEC_CIPHER_PACKET_T; -+ -+typedef union -+{ -+ unsigned int auth_packet; -+ struct bit_000c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */ -+ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */ -+#else -+ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */ -+ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */ -+#endif -+ } bits; -+} IPSEC_AUTH_PACKET_T; -+ -+typedef union -+{ -+ unsigned int status; -+ struct bit_00a8 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */ -+ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */ -+ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */ -+ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */ -+ unsigned int : 16; -+ unsigned int parser_err_code: 4; /* Authentication Compare result */ -+ unsigned int auth_err_code : 4; /* Authentication module error code */ -+ unsigned int cipher_err_code: 4; /* Cipher module erroe code */ -+#else -+ unsigned int cipher_err_code: 4; /* Cipher module erroe code */ -+ unsigned int auth_err_code : 4; /* Authentication module error code */ -+ unsigned int parser_err_code: 4; /* Authentication Compare result */ -+ unsigned int : 16; -+ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */ -+ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */ -+ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */ -+ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */ -+#endif -+ } bits; -+} IPSEC_STATUS_T; -+ -+ -+ -+/************************************************************************/ -+/* IPSec Descriptor Format */ -+/************************************************************************/ -+typedef struct descriptor_t -+{ -+ union frame_control_t -+ { -+ unsigned int bits32; -+ struct bits_0000 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int : 1; /* authentication compare result */ -+ unsigned int : 6; /* checksum[15:8] */ -+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ -+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ -+#else -+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ -+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ -+ unsigned int : 6; /* checksum[15:8] */ -+ unsigned int : 1; /* authentication compare result */ -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ -+#endif -+ } bits; -+ } frame_ctrl; -+ -+ union flag_status_t -+ { -+ unsigned int bits32; -+ struct bits_0004 -+ { -+#if (BIG_ENDIAN==1) -+// unsigned int checksum : 8; /* checksum[7:0] */ -+ unsigned int : 4; -+ unsigned int auth_result: 1; -+ unsigned int wep_crc_ok : 1; -+ unsigned int tkip_mic_ok: 1; -+ unsigned int ccmp_mic_ok: 1; -+ unsigned int process_id : 8; -+ unsigned int frame_count:16; -+#else -+ unsigned int frame_count:16; -+ unsigned int process_id : 8; -+ unsigned int ccmp_mic_ok: 1; -+ unsigned int tkip_mic_ok: 1; -+ unsigned int wep_crc_ok : 1; -+ unsigned int auth_result: 1; -+ unsigned int : 4; -+// unsigned int checksum : 8; /* checksum[7:0] */ -+#endif -+ } bits_rx_status; -+ -+ struct bits_0005 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int : 8; -+ unsigned int process_id : 8; -+ unsigned int frame_count:16; -+#else -+ unsigned int frame_count:16; -+ unsigned int process_id : 8; -+ unsigned int : 8; -+#endif -+ } bits_tx_status; -+ -+ struct bits_0006 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int :22; -+ unsigned int tqflag :10; -+#else -+ unsigned int tqflag :10; -+ unsigned int :22; -+#endif -+ } bits_tx_flag; -+ } flag_status; -+ -+ unsigned int buf_adr; /* data buffer address */ -+ -+ union next_desc_t -+ { -+ unsigned int next_descriptor; -+ struct bits_000c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int ndar :28; /* next descriptor address */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */ -+ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ -+ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ -+#else -+ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ -+ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ -+ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int ndar :28; /* next descriptor address */ -+#endif -+ } bits; -+ } next_desc; -+} IPSEC_DESCRIPTOR_T; -+ -+ -+typedef struct IPSEC_S -+{ -+ unsigned char *tx_bufs; -+ unsigned char *rx_bufs; -+ IPSEC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/ -+ IPSEC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/ -+ IPSEC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */ -+ IPSEC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */ -+ IPSEC_DESCRIPTOR_T *tx_finished_desc; -+ IPSEC_DESCRIPTOR_T *rx_finished_desc; -+ dma_addr_t rx_desc_dma; /* physical RX descriptor address */ -+ dma_addr_t tx_desc_dma; /* physical TX descriptor address */ -+ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */ -+ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */ -+} IPSEC_T; -+ -+ -+/*=====================================================================================================*/ -+/* Data Structure of IPSEC Control Packet */ -+/*=====================================================================================================*/ -+typedef struct IPSEC_ECB_AUTH_S -+{ -+ IPSEC_CONTROL_T control; /* control parameter */ -+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ -+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ -+ unsigned char cipher_key[8*4]; -+ unsigned char auth_check_val[5*4]; -+} IPSEC_ECB_AUTH_T; -+ -+typedef struct IPSEC_CBC_AUTH_S -+{ -+ IPSEC_CONTROL_T control; /* control parameter */ -+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ -+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ -+ unsigned char cipher_iv[4*4]; -+ unsigned char cipher_key[8*4]; -+ unsigned char auth_check_val[5*4]; -+} IPSEC_CBC_AUTH_T; -+ -+typedef struct IPSEC_ECB_HMAC_AUTH_S -+{ -+ IPSEC_CONTROL_T control; /* control parameter */ -+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ -+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ -+ unsigned char cipher_key[8*4]; -+ unsigned char auth_key[16*4]; -+ unsigned char auth_check_val[5*4]; -+} IPSEC_ECB_AUTH_HMAC_T; -+ -+typedef struct IPSEC_CBC_HMAC_AUTH_S -+{ -+ IPSEC_CONTROL_T control; /* control parameter */ -+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ -+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ -+ unsigned char cipher_iv[4*4]; -+ unsigned char cipher_key[8*4]; -+ unsigned char auth_key[16*4]; -+ unsigned char auth_check_val[5*4]; -+} IPSEC_CBC_AUTH_HMAC_T; -+ -+typedef struct IPSEC_HMAC_AUTH_S -+{ -+ IPSEC_CONTROL_T control; /* control parameter */ -+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ -+ unsigned char auth_key[16*4]; -+ unsigned char auth_check_val[5*4]; -+} IPSEC_HMAC_AUTH_T; -+ -+typedef union -+{ -+ unsigned char auth_pkt[28]; -+ -+ struct IPSEC_AUTH_S -+ { -+ IPSEC_CONTROL_T control; /* control parameter(4-byte) */ -+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter(4-byte) */ -+ unsigned char auth_check_val[5*4]; -+ } var; -+} IPSEC_AUTH_T; -+ -+typedef struct IPSEC_CIPHER_CBC_S -+{ -+ IPSEC_CONTROL_T control; /* control parameter */ -+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ -+ unsigned char cipher_iv[4*4]; -+ unsigned char cipher_key[8*4]; -+} IPSEC_CIPHER_CBC_T; -+ -+typedef struct IPSEC_CIPHER_ECB_S -+{ -+ IPSEC_CONTROL_T control; /* control parameter */ -+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ -+ unsigned char cipher_key[8*4]; -+} IPSEC_CIPHER_ECB_T; -+ -+ -+/**************************************************************************** -+ * Structure Definition * -+ ****************************************************************************/ -+struct IPSEC_PACKET_S -+{ -+ unsigned int op_mode; /* CIPHER_ENC(1),CIPHER_DEC(3),AUTH(4),ENC_AUTH(5),AUTH_DEC(7) */ -+ unsigned int cipher_algorithm; /* ECB_DES(0),ECB_3DES(1),ECB_AES(2),CBC_DES(4),CBC_3DES(5),CBC_AES(6) */ -+ unsigned int auth_algorithm; /* SHA1(0),MD5(1),HMAC_SHA1(2),HMAC_MD5(3),FCS(4) */ -+ unsigned int auth_result_mode; /* AUTH_APPEND(0),AUTH_CHKVAL(1) */ -+ unsigned int process_id; /* Used to identify the process */ -+ unsigned int auth_header_len; /* Header length to be skipped by the authenticator */ -+ unsigned int auth_algorithm_len; /* Length of message body that is to be authenticated */ -+ unsigned int cipher_header_len; /* Header length to be skipped by the cipher */ -+ unsigned int cipher_algorithm_len; /* Length of message body to be encrypted or decrypted */ -+ unsigned char iv[16]; /* Initial vector used for DES,3DES,AES */ -+ unsigned int iv_size; /* Initial vector size */ -+ unsigned char auth_key[64]; /* authentication key */ -+ unsigned int auth_key_size; /* authentication key size */ -+ unsigned char cipher_key[32]; /* cipher key */ -+ unsigned int cipher_key_size; /* cipher key size */ -+ struct scatterlist *in_packet; /* input_packet buffer pointer */ -+ //unsigned char *in_packet; /* input_packet buffer pointer */ -+ unsigned int pkt_len; /* input total packet length */ -+ unsigned char auth_checkval[20]; /* Authentication check value/FCS check value */ -+ struct IPSEC_PACKET_S *next,*prev; /* pointer to next/previous operation to perform on buffer */ -+ void (*callback)(struct IPSEC_PACKET_S *); /* function to call when done authentication/cipher */ -+ unsigned char *out_packet; /* output_packet buffer pointer */ -+ //struct scatterlist *out_packet; /* output_packet buffer pointer */ -+ unsigned int out_pkt_len; /* output total packet length */ -+ unsigned int auth_cmp_result; /* authentication compare result */ -+ unsigned int checksum; /* checksum value */ -+ unsigned int status; /* ipsec return status. 0:success, others:fail */ -+#if (IPSEC_TEST == 1) -+ unsigned char *sw_packet; /* for test only */ -+ unsigned int sw_pkt_len; /* for test only */ -+#endif -+} ; -+ -+/***************************************************************************** -+ * Function : ipsec_crypto_hw_process -+ * Description : This function processes H/W authentication and cipher. -+ * Input : op_info - the authentication and cipher information for IPSec module. -+ * Output : none. -+ * Return : 0 - success, others - failure. -+ *****************************************************************************/ -+int ipsec_crypto_hw_process(struct IPSEC_PACKET_S *op_info); -+ -+int ipsec_get_cipher_algorithm(unsigned char *alg_name,unsigned int alg_mode); -+int ipsec_get_auth_algorithm(unsigned char *alg_name,unsigned int alg_mode); -+#if 0 -+void ipsec_sw_authentication(char *data,unsigned int data_len,char *authkey,char authAlgorithm,char *auth_result); -+void ipsec_sw_cipher(unsigned char *pt,unsigned int pt_len, unsigned char *cipher_key, unsigned int key_size, -+ unsigned char *iv,unsigned int cipherAlgorithm,unsigned char *ct); -+void ipsec_sw_auth_cipher(unsigned int op_mode,char *data,unsigned int data_len, -+ BYTE *auth_key,char authAlgorithm,char *auth_result, -+ char *pt, unsigned int pt_len,char *cipher_key, int key_size, -+ char *iv, char cipherAlgorithm,char *ct); -+#endif -+ -+ -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/sl_random.h -@@ -0,0 +1,2 @@ -+#define RANDOM_ADD (IO_ADDRESS (0x051000000) + 0x0AC) -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/system.h -@@ -0,0 +1,54 @@ -+/* -+ * linux/include/asm-arm/arch-sl2312/system.h -+ * -+ * Copyright (C) 1999 ARM Limited -+ * Copyright (C) 2000 Deep Blue Solutions Ltd -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_SYSTEM_H -+#define __ASM_ARCH_SYSTEM_H -+ -+#include -+#include -+#include -+#include -+ -+static void arch_idle(void) -+{ -+ /* -+ * This should do all the clock switching -+ * and wait for interrupt tricks -+ */ -+ cpu_do_idle(); -+} -+ -+extern __inline__ void arch_reset(char mode) -+{ -+ __raw_writel( (int) GLOBAL_RESET|RESET_CPU1, IO_ADDRESS(SL2312_GLOBAL_BASE) + GLOBAL_RESET_REG); -+} -+ -+ -+void (*pm_power_off)(void); -+//{ -+// printk("arch_power_off\n"); -+ -+ // Power off -+// __raw_writel( (int) 0x00000001, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); -+ -+//} -+ -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/timer.h -@@ -0,0 +1,53 @@ -+/* -+ * -+ * This file contains the register definitions for the Excalibur -+ * Timer TIMER00. -+ * -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __TIMER_H -+#define __TIMER_H -+ -+/* -+ * Register definitions for the timers -+ */ -+ -+#define TIMER_COUNT(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x00 )) -+#define TIMER_LOAD(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x04 )) -+#define TIMER_MATCH1(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x08 )) -+#define TIMER_MATCH2(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x0C )) -+#define TIMER_CR(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x30 )) -+#define TIMER_1_CR_ENABLE_MSK (0x00000001) -+#define TIMER_1_CR_ENABLE_OFST (0) -+#define TIMER_1_CR_CLOCK_MSK (0x00000002) -+#define TIMER_1_CR_CLOCK_OFST (1) -+#define TIMER_1_CR_INT_MSK (0x00000004) -+#define TIMER_1_CR_INT_OFST (2) -+#define TIMER_2_CR_ENABLE_MSK (0x00000008) -+#define TIMER_2_CR_ENABLE_OFST (3) -+#define TIMER_2_CR_CLOCK_MSK (0x00000010) -+#define TIMER_2_CR_CLOCK_OFST (4) -+#define TIMER_2_CR_INT_MSK (0x00000020) -+#define TIMER_2_CR_INT_OFST (5) -+#define TIMER_3_CR_ENABLE_MSK (0x00000040) -+#define TIMER_3_CR_ENABLE_OFST (6) -+#define TIMER_3_CR_CLOCK_MSK (0x00000080) -+#define TIMER_3_CR_CLOCK_OFST (7) -+#define TIMER_3_CR_INT_MSK (0x00000100) -+#define TIMER_3_CR_INT_OFST (8) -+ -+#endif /* __TIMER00_H */ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/timex.h -@@ -0,0 +1,29 @@ -+/* -+ * linux/include/asm-arm/arch-epxa10db/timex.h -+ * -+ * Excalibur timex specifications -+ * -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+/* -+ * ?? -+ */ -+#include -+ -+#define CLOCK_TICK_RATE APB_CLK -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/uart.h -@@ -0,0 +1,100 @@ -+/* * -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __UART_H -+#define __UART_H -+ -+/* -+ * Register definitions for the UART -+ */ -+ -+#define UART_TX_FIFO_SIZE (15) -+ -+#define UART_RBR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // read -+#define UART_THR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // write -+#define UART_IER(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x04)) -+#define UART_IER_MS (0x08) -+#define UART_IER_RLS (0x04) -+#define UART_IER_TE (0x02) -+#define UART_IER_DR (0x01) -+#define UART_IIR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // read -+#define UART_IIR_NONE (0x01) /* No interrupt pending */ -+#define UART_IIR_RLS (0x06) /* Receive Line Status */ -+#define UART_IIR_DR (0x04) /* Receive Data Ready */ -+#define UART_IIR_TIMEOUT (0x0c) /* Receive Time Out */ -+#define UART_IIR_TE (0x02) /* THR Empty */ -+#define UART_IIR_MODEM (0x00) /* Modem Status */ -+#define UART_FCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // write -+#define UART_FCR_FE (0x01) /* FIFO Enable */ -+#define UART_FCR_RXFR (0x02) /* Rx FIFO Reset */ -+#define UART_FCR_TXFR (0x04) /* Tx FIFO Reset */ -+#define UART_FCR_FIFO_1C (0x00) -+#define UART_FCR_FIFO_4C (0x40) -+#define UART_FCR_FIFO_8C (0x80) -+#define UART_FCR_FIFO_14C (0xC0) -+#define UART_LCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0C)) -+#define UART_LCR_MSK (0x03) -+#define UART_LCR_LEN5 (0x00) -+#define UART_LCR_LEN6 (0x01) -+#define UART_LCR_LEN7 (0x02) -+#define UART_LCR_LEN8 (0x03) -+#define UART_LCR_STOP (0x04) -+#define UART_LCR_EVEN (0x18) /* Even Parity */ -+#define UART_LCR_ODD (0x08) /* Odd Parity */ -+#define UART_LCR_PE (0x08) /* Parity Enable */ -+#define UART_LCR_SETBREAK (0x40) /* Set Break condition */ -+#define UART_LCR_STICKPARITY (0x20) /* Stick Parity Enable */ -+#define UART_LCR_DLAB (0x80) /* Divisor Latch Access Bit */ -+#define UART_MCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x10)) -+#define UART_MCR_DTR (0x1) /* Data Terminal Ready */ -+#define UART_MCR_RTS (0x2) /* Request to Send */ -+#define UART_MCR_OUT1 (0x4) /* output 1 */ -+#define UART_MCR_OUT2 (0x8) /* output2 or global interrupt enable */ -+#define UART_MCR_LPBK (0x10) /* loopback mode */ -+#define UART_MCR_MASK (0xE3) -+#define UART_LSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x14)) -+#define UART_LSR_DR (0x01) /* Data Ready */ -+#define UART_LSR_OE (0x02) /* Overrun Error */ -+#define UART_LSR_PE (0x04) /* Parity Error */ -+#define UART_LSR_FE (0x08) /* Framing Error */ -+#define UART_LSR_BI (0x10) /* Break Interrupt */ -+#define UART_LSR_THRE (0x20) /* THR Empty */ -+#define UART_LSR_TE (0x40) /* Transmitte Empty */ -+#define UART_LSR_DE (0x80) /* FIFO Data Error */ -+#define UART_MSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x18)) -+#define UART_MSR_DELTACTS (0x01) /* Delta CTS */ -+#define UART_MSR_DELTADSR (0x02) /* Delta DSR */ -+#define UART_MSR_TERI (0x04) /* Trailing Edge RI */ -+#define UART_MSR_DELTACD (0x08) /* Delta CD */ -+#define UART_MSR_CTS (0x10) /* Clear To Send */ -+#define UART_MSR_DSR (0x20) /* Data Set Ready */ -+#define UART_MSR_RI (0x40) /* Ring Indicator */ -+#define UART_MSR_DCD (0x80) /* Data Carrier Detect */ -+#define UART_SPR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x1C)) -+#define UART_DIV_LO(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0)) -+#define UART_DIV_HI(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x4)) -+#define UART_PSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x8)) -+#define UART_MDR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x20)) -+#define UART_MDR_SERIAL (0x0) -+ -+#define UART_MSR_DDCD 0x08 /* Delta DCD */ -+#define UART_MSR_DDSR 0x02 /* Delta DSR */ -+#define UART_MSR_DCTS 0x01 /* Delta CTS */ -+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ -+ -+ -+#endif /* __UART_H */ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/uncompress.h -@@ -0,0 +1,94 @@ -+/* -+ * linux/include/asm-arm/arch-epxa10db/uncompress.h -+ * -+ * Copyright (C) 1999 ARM Limited -+ * Copyright (C) 2001 Altera Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include "asm/arch/platform.h" -+#include "asm/arch/hardware.h" -+#define UART_TYPE (volatile unsigned int*) -+#ifndef CONFIG_SERIAL_IT8712 -+#include "asm/arch/uart.h" -+#endif -+extern unsigned int it8712_uart_base; -+ -+/* -+ * This does not append a newline -+ */ -+static void putstr(const char *s) -+{ -+ -+#ifdef CONFIG_SERIAL_IT8712 -+ -+ unsigned char *base,*status,stat; -+ int i ; -+ -+ status = (unsigned char*)it8712_uart_base + 5; -+ base = (unsigned char*)it8712_uart_base ; -+ -+ while (*s) { -+ -+ stat = *status; -+ while (!(stat&0x20)) { // check status -+ for(i=0;i<0x10;i++) ; -+ status = (unsigned char*)it8712_uart_base + 5; -+ stat = *status ; -+ } -+ -+ *base = *s; -+ barrier(); -+ -+ if (*s == '\n') { -+ stat = *status; -+ while (!(stat&0x20)) { // check status -+ for(i=0;i<0x10;i++) ; -+ status = (unsigned char*)it8712_uart_base + 5; -+ stat = *status ; -+ } -+ -+ barrier(); -+ *base = '\r'; -+ } -+ s++; -+ } -+ -+#else -+ while (*s) { -+ while (!(*UART_LSR(SL2312_UART_BASE) & -+ UART_LSR_THRE)); -+ barrier(); -+ -+ *UART_THR(SL2312_UART_BASE) = *s; -+ -+ if (*s == '\n') { -+ while (!(*UART_LSR(SL2312_UART_BASE) & -+ UART_LSR_THRE)); -+ barrier(); -+ -+ *UART_THR(SL2312_UART_BASE) = '\r'; -+ } -+ s++; -+ } -+#endif -+} -+ -+/* -+ * nothing to do -+ */ -+#define arch_decomp_setup() -+ -+#define arch_decomp_wdog() ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/vmalloc.h -@@ -0,0 +1,36 @@ -+/* -+ * linux/include/asm-arm/arch-epxa10db/vmalloc.h -+ * -+ * Copyright (C) 2000 Russell King. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+/* -+ * Just any arbitrary offset to the start of the vmalloc VM area: the -+ * current 8MB value just means that there will be a 8MB "hole" after the -+ * physical memory until the kernel virtual memory starts. That means that -+ * any out-of-bounds memory accesses will hopefully be caught. -+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced -+ * area for the same reason. ;) -+ */ -+#define VMALLOC_OFFSET (8*1024*1024) -+#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) -+#define VMALLOC_VMADDR(x) ((unsigned long)(x)) -+#define VMALLOC_END (PAGE_OFFSET + 0x10000000) -+ -+//#define MODULE_START (PAGE_OFFSET - 16*1048576) -+//#define MODULE_END (PAGE_OFFSET) -+ ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/watchdog.h -@@ -0,0 +1,58 @@ -+#ifndef __WATCHDOG_H -+#define __WATCHDOG_H -+ -+#define WATCHDOG_BASE (IO_ADDRESS (SL2312_WAQTCHDOG_BASE)) -+#define WATCHDOG_COUNTER (WATCHDOG_BASE + 0x00) -+#define WATCHDOG_LOAD (WATCHDOG_BASE + 0x04) -+#define WATCHDOG_RESTART (WATCHDOG_BASE + 0x08) -+#define WATCHDOG_CR (WATCHDOG_BASE + 0x0C) -+#define WATCHDOG_STATUS (WATCHDOG_BASE + 0x10) -+#define WATCHDOG_CLEAR (WATCHDOG_BASE + 0x14) -+#define WATCHDOG_INTRLEN (WATCHDOG_BASE + 0x18) -+ -+#define WATCHDOG_WDENABLE_MSK (0x00000001) -+#define WATCHDOG_WDENABLE_OFST (0) -+#define WATCHDOG_WDRST_MSK (0x00000002) -+#define WATCHDOG_WDRST_OFST (1) -+#define WATCHDOG_WDINTR_MSK (0x00000004) -+#define WATCHDOG_WDINTR_OFST (2) -+#define WATCHDOG_WDEXT_MSK (0x00000008) -+#define WATCHDOG_WDEXT_OFST (3) -+#define WATCHDOG_WDCLOCK_MSK (0x00000010) -+#define WATCHDOG_WDCLOCK_OFST (4) -+#define WATCHDOG_CR_MASK (0x0000001F) -+ -+#define WATCHDOG_CLEAR_STATUS 0x1 -+#define WATCHDOG_ENABLE 1 -+#define WATCHDOG_DISABLE 0 -+#define WATCHDOG_RESTART_VALUE 0x5AB9 -+ -+#define WATCHDOG_MINOR 130 -+ -+#define WATCHDOG_IOCTRL_DISABLE 0x01 -+#define WATCHDOG_IOCTRL_SETTIME 0x02 -+#define WATCHDOG_IOCTRL_ENABLE 0x03 -+#define WATCHDOG_IOCTRL_RESTART 0x04 -+ -+#define WATCHDOG_TIMEOUT_SCALE APB_CLK -+#define WATCHDOG_TIMEOUT_MARGIN 30 -+#define WATCHDOG_DRIVER_OPEN 1 -+#define WATCHDOG_DRIVER_CLOSE 0 -+ -+ -+static void watchdog_disable(void); -+static void watchdog_enable(void); -+static int watchdog_open(struct inode *, struct file *); -+static int watchdog_release(struct inode *, struct file *); -+static ssize_t watchdog_read(struct file *, char *, size_t, loff_t *); -+static ssize_t watchdog_write(struct file *, const char *, size_t, loff_t *); -+static int watchdog_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -+#ifdef WATCHDOG_TEST -+static void watchdog_fire(int, void *, struct pt_regs *); -+#endif -+ -+ -+ -+ -+ -+#endif ---- /dev/null -+++ b/include/asm-arm/arch-sl2312/xor.h -@@ -0,0 +1,29 @@ -+/* -+ * include/asm-arm/arch-sl2312/xor.h -+ * -+ * Copyright (C) 2005 Storlink Corp. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef _ASM_ARCH_XOR_H -+#define _ASM_ARCH_XOR_H -+ -+/* -+ * Function prototypes -+ */ -+void xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2); -+ -+void xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, -+ unsigned long *p3); -+ -+void xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, -+ unsigned long *p3, unsigned long *p4); -+ -+void xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, -+ unsigned long *p3, unsigned long *p4, unsigned long *p5); -+ -+#endif /* _ASM_ARCH_XOR_H */ -+ ---- a/include/asm-arm/cacheflush.h -+++ b/include/asm-arm/cacheflush.h -@@ -46,6 +46,18 @@ - # define MULTI_CACHE 1 - #endif - -+/*********************************************************************** -+ * Storlink SoC -- Cache -+ ***********************************************************************/ -+#if defined(CONFIG_CPU_FA526) -+# ifdef _CACHE -+# define MULTI_CACHE 1 -+# else -+# define _CACHE fa -+# endif -+#endif -+/***********************************************************************/ -+ - #if defined(CONFIG_CPU_ARM926T) - # ifdef _CACHE - # define MULTI_CACHE 1 ---- a/include/asm-arm/page.h -+++ b/include/asm-arm/page.h -@@ -74,6 +74,18 @@ - # endif - #endif - -+/*********************************************************************** -+ * Storlink SoC -- flash -+ ***********************************************************************/ -+#ifdef CONFIG_CPU_COPY_FA -+# ifdef _USER -+# define MULTI_USER 1 -+# else -+# define _USER fa -+# endif -+#endif -+/***********************************************************************/ -+ - #ifdef CONFIG_CPU_SA1100 - # ifdef _USER - # define MULTI_USER 1 ---- a/include/asm-arm/proc-fns.h -+++ b/include/asm-arm/proc-fns.h -@@ -89,6 +89,14 @@ - # define CPU_NAME cpu_arm922 - # endif - # endif -+# ifdef CONFIG_CPU_FA526 -+# ifdef CPU_NAME -+# undef MULTI_CPU -+# define MULTI_CPU -+# else -+# define CPU_NAME cpu_fa526 -+# endif -+# endif - # ifdef CONFIG_CPU_ARM925T - # ifdef CPU_NAME - # undef MULTI_CPU ---- a/include/asm-arm/tlbflush.h -+++ b/include/asm-arm/tlbflush.h -@@ -39,6 +39,8 @@ - #define TLB_V6_D_ASID (1 << 17) - #define TLB_V6_I_ASID (1 << 18) - -+#define TLB_DINVAL (1 << 28) -+#define TLB_BTB (1 << 29) - #define TLB_DCLEAN (1 << 30) - #define TLB_WB (1 << 31) - -@@ -52,6 +54,7 @@ - * v4wb - ARMv4 with write buffer without I TLB flush entry instruction - * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction - * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction -+ * fa - ARMv4 with write buffer with UTLB and branch target buffer (BTB) - */ - #undef _TLB - #undef MULTI_TLB -@@ -86,6 +89,44 @@ - # define v4_always_flags (-1UL) - #endif - -+#ifdef CONFIG_CPU_FA_BTB -+#define __TLB_BTB TLB_BTB -+#else -+#define __TLB_BTB 0 -+#endif -+ -+#ifdef CONFIG_CPU_FA_WB_DISABLE -+#define __TLB_WB 0 -+#else -+#define __TLB_WB TLB_WB -+#endif -+ -+/* Fix buggy CPU which doesn't invalidate Dcache properly */ -+#ifdef CONFIG_CPU_FA520 -+#define __TLB_DINVAL TLB_DINVAL -+#elif defined(CONFIG_CPU_FA526) -+//#define __TLB_DINVAL TLB_DINVAL -+#define __TLB_DINVAL 0 -+#else -+#define __TLB_DINVAL 0 -+#endif -+ -+#define fa_tlb_flags (__TLB_WB | __TLB_BTB | __TLB_DINVAL | TLB_DCLEAN | \ -+ TLB_V4_U_FULL | TLB_V4_U_PAGE) -+ -+#ifdef CONFIG_CPU_TLB_FA -+# define fa_possible_flags fa_tlb_flags -+# define fa_always_flags fa_tlb_flags -+# ifdef _TLB -+# define MULTI_TLB 1 -+# else -+# define _TLB fa -+# endif -+#else -+# define fa_possible_flags 0 -+# define fa_always_flags (-1UL) -+#endif -+ - #define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ - TLB_V4_I_FULL | TLB_V4_D_FULL | \ - TLB_V4_I_PAGE | TLB_V4_D_PAGE) -@@ -246,12 +287,14 @@ extern struct cpu_tlb_fns cpu_tlb; - v4_possible_flags | \ - v4wbi_possible_flags | \ - v4wb_possible_flags | \ -+ fa_possible_flags | \ - v6wbi_possible_flags) - - #define always_tlb_flags (v3_always_flags & \ - v4_always_flags & \ - v4wbi_always_flags & \ - v4wb_always_flags & \ -+ fa_always_flags & \ - v6wbi_always_flags) - - #define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) -@@ -261,6 +304,9 @@ static inline void local_flush_tlb_all(v - const int zero = 0; - const unsigned int __tlb_flag = __cpu_tlb_flags; - -+ if (tlb_flag(TLB_DINVAL)) -+ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); -+ - if (tlb_flag(TLB_WB)) - dsb(); - -@@ -281,6 +327,13 @@ static inline void local_flush_tlb_all(v - dsb(); - isb(); - } -+ -+ if (tlb_flag(TLB_BTB)) -+ { -+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); -+ asm("mov r0, r0" : : ); -+ asm("mov r0, r0" : : ); -+ } - } - - static inline void local_flush_tlb_mm(struct mm_struct *mm) -@@ -289,6 +342,9 @@ static inline void local_flush_tlb_mm(st - const int asid = ASID(mm); - const unsigned int __tlb_flag = __cpu_tlb_flags; - -+ if (tlb_flag(TLB_DINVAL)) -+ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); -+ - if (tlb_flag(TLB_WB)) - dsb(); - -@@ -317,6 +373,14 @@ static inline void local_flush_tlb_mm(st - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } -+ -+ if (tlb_flag(TLB_BTB)) -+ { -+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); -+ asm("mov r0, r0" : : ); -+ asm("mov r0, r0" : : ); -+ } -+ - } - - static inline void -@@ -327,6 +391,9 @@ local_flush_tlb_page(struct vm_area_stru - - uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); - -+ if (tlb_flag(TLB_DINVAL)) -+ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); // clean & invalidate data cache all -+ - if (tlb_flag(TLB_WB)) - dsb(); - -@@ -357,6 +424,13 @@ local_flush_tlb_page(struct vm_area_stru - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } -+ -+ if (tlb_flag(TLB_BTB)) -+ { -+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); -+ asm("mov r0, r0" : : ); -+ asm("mov r0, r0" : : ); -+ } - } - - static inline void local_flush_tlb_kernel_page(unsigned long kaddr) -@@ -366,6 +440,9 @@ static inline void local_flush_tlb_kerne - - kaddr &= PAGE_MASK; - -+ if (tlb_flag(TLB_DINVAL)) -+ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); -+ - if (tlb_flag(TLB_WB)) - dsb(); - -@@ -386,6 +463,12 @@ static inline void local_flush_tlb_kerne - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V6_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); -+ if (tlb_flag(TLB_BTB)) -+ { -+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); -+ asm("mov r0, r0" : : ); -+ asm("mov r0, r0" : : ); -+ } - - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | -@@ -412,6 +495,7 @@ static inline void local_flush_tlb_kerne - */ - static inline void flush_pmd_entry(pmd_t *pmd) - { -+ const unsigned int zero = 0; - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_DCLEAN)) -@@ -419,15 +503,30 @@ static inline void flush_pmd_entry(pmd_t - : : "r" (pmd) : "cc"); - if (tlb_flag(TLB_WB)) - dsb(); -+ -+ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005 -+ { -+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); -+ asm("mov r0, r0" : : ); -+ asm("mov r0, r0" : : ); -+ } - } - - static inline void clean_pmd_entry(pmd_t *pmd) - { -+ const unsigned int zero = 0; // Luke Lee 05/16/2005 ins 1 - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_DCLEAN)) - asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" - : : "r" (pmd) : "cc"); -+ -+ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005 -+ { -+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); -+ asm("mov r0, r0" : : ); -+ asm("mov r0, r0" : : ); -+ } - } - - #undef tlb_flag ---- a/include/asm-arm/xor.h -+++ b/include/asm-arm/xor.h -@@ -139,3 +139,18 @@ static struct xor_block_template xor_blo - xor_speed(&xor_block_8regs); \ - xor_speed(&xor_block_32regs); \ - } while (0) -+ -+#ifdef CONFIG_GEMINI_XOR_ACCE -+#include -+static struct xor_block_template xor_block_gemini = { -+ .name = "gemini xor acceleration", -+ .do_2 = xor_gemini_2, -+ .do_3 = xor_gemini_3, -+ .do_4 = xor_gemini_4, -+ .do_5 = xor_gemini_5,}; -+#undef XOR_TRY_TEMPLATES -+#define XOR_TRY_TEMPLATES \ -+ do { \ -+ xor_speed(&xor_block_gemini); \ -+ } while (0) -+#endif ---- a/include/linux/apm_bios.h -+++ b/include/linux/apm_bios.h -@@ -217,4 +217,24 @@ extern struct apm_info apm_info; - #define APM_IOC_STANDBY _IO('A', 1) - #define APM_IOC_SUSPEND _IO('A', 2) - -+// add by jason for power control -+struct pwc_ioctl_data { -+ unsigned int action; // sword struct -+ unsigned int data; // stand shutdown time for PWC_SET_SHUT_TIME -+ // stand shutdown source for PWC_WAIT_BTN -+}; -+ -+#define POWEROFF 0x01 -+#define RESTORE_DEFAULT 0x02 -+#define SYSTEM_REBOOT 0x04 -+ -+#define PWR_SRC_CIR 0x10 -+#define PWR_SRC_RTC 0x20 -+#define PWR_SRC_BTN 0x40 -+ -+#define PWC_IOCTL_BASE 'A' // use linux APM ioctl -+#define PWC_SET_SHUT_TIME _IOW('A', 16, struct pwc_ioctl_data) -+#define PWC_WAIT_BTN _IOR('A', 17, struct pwc_ioctl_data) -+#define PWC_SHUTDOWN _IO ('A', 18) -+ - #endif /* LINUX_APM_H */ ---- a/kernel/time.c -+++ b/kernel/time.c -@@ -76,6 +76,7 @@ asmlinkage long sys_time(time_t __user * - * why not move it into the appropriate arch directory (for those - * architectures that need it). - */ -+extern void rtc_set_time_second(unsigned int second); - - asmlinkage long sys_stime(time_t __user *tptr) - { -@@ -87,6 +88,10 @@ asmlinkage long sys_stime(time_t __user - - tv.tv_nsec = 0; - -+#ifdef CONFIG_SL2312_RTC -+ rtc_set_time_second(tv.tv_sec); -+#endif -+ - err = security_settime(&tv, NULL); - if (err) - return err; diff --git a/target/linux/storm/patches/002-gmac.patch b/target/linux/storm/patches/002-gmac.patch deleted file mode 100644 index 986a628ac6..0000000000 --- a/target/linux/storm/patches/002-gmac.patch +++ /dev/null @@ -1,18615 +0,0 @@ ---- /dev/null -+++ b/drivers/net/sl2312_emac.c -@@ -0,0 +1,4604 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define BIG_ENDIAN 0 -+ -+#define GMAC_DEBUG 0 -+ -+#define GMAC_PHY_IF 2 -+ -+/* define PHY address */ -+#define HPHY_ADDR 0x01 -+#define GPHY_ADDR 0x02 -+ -+#define CONFIG_ADM_6999 1 -+/* define chip information */ -+#define DRV_NAME "SL2312" -+#define DRV_VERSION "0.1.1" -+#define SL2312_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION -+ -+/* define TX/RX descriptor parameter */ -+#define MAX_ETH_FRAME_SIZE 1920 -+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE -+#define TX_DESC_NUM 128 -+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * TX_DESC_NUM) -+#define RX_BUF_SIZE MAX_ETH_FRAME_SIZE -+#define RX_DESC_NUM 256 -+#define RX_BUF_TOT_LEN (RX_BUF_SIZE * RX_DESC_NUM) -+#define MAX_ISR_WORK 20 -+ -+unsigned int int_status = 0; -+ -+/* define GMAC base address */ -+#define GMAC_PHYSICAL_BASE_ADDR (SL2312_GMAC_BASE) -+#define GMAC_BASE_ADDR (IO_ADDRESS(GMAC_PHYSICAL_BASE_ADDR)) -+#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE)) -+ -+#define GMAC0_BASE (IO_ADDRESS(SL2312_GMAC0_BASE)) -+#define GMAC1_BASE (IO_ADDRESS(SL2312_GMAC1_BASE)) -+ -+/* memory management utility */ -+#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle) -+#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle) -+ -+//#define gmac_read_reg(offset) (readl(GMAC_BASE_ADDR + offset)) -+//#define gmac_write_reg(offset,data,mask) writel( (gmac_read_reg(offset)&~mask) |(data&mask),(GMAC_BASE_ADDR+offset)) -+ -+/* define owner bit */ -+#define CPU 0 -+#define DMA 1 -+ -+#define ACTIVE 1 -+#define NONACTIVE 0 -+ -+#define CONFIG_SL_NAPI -+ -+#ifndef CONFIG_SL2312_MPAGE -+#define CONFIG_SL2312_MPAGE -+#endif -+ -+#ifdef CONFIG_SL2312_MPAGE -+#include -+#include -+#include -+#endif -+ -+#ifndef CONFIG_TXINT_DISABLE -+//#define CONFIG_TXINT_DISABLE -+#endif -+ -+enum phy_state -+{ -+ LINK_DOWN = 0, -+ LINK_UP = 1 -+}; -+ -+ -+/* transmit timeout value */ -+#define TX_TIMEOUT (6*HZ) -+ -+/***************************************/ -+/* the offset address of GMAC register */ -+/***************************************/ -+enum GMAC_REGISTER { -+ GMAC_STA_ADD0 = 0x0000, -+ GMAC_STA_ADD1 = 0x0004, -+ GMAC_STA_ADD2 = 0x0008, -+ GMAC_RX_FLTR = 0x000c, -+ GMAC_MCAST_FIL0 = 0x0010, -+ GMAC_MCAST_FIL1 = 0x0014, -+ GMAC_CONFIG0 = 0x0018, -+ GMAC_CONFIG1 = 0x001c, -+ GMAC_CONFIG2 = 0x0020, -+ GMAC_BNCR = 0x0024, -+ GMAC_RBNR = 0x0028, -+ GMAC_STATUS = 0x002c, -+ GMAC_IN_DISCARDS= 0x0030, -+ GMAC_IN_ERRORS = 0x0034, -+ GMAC_IN_MCAST = 0x0038, -+ GMAC_IN_BCAST = 0x003c, -+ GMAC_IN_MAC1 = 0x0040, -+ GMAC_IN_MAC2 = 0x0044 -+}; -+ -+/*******************************************/ -+/* the offset address of GMAC DMA register */ -+/*******************************************/ -+enum GMAC_DMA_REGISTER { -+ GMAC_DMA_DEVICE_ID = 0xff00, -+ GMAC_DMA_STATUS = 0xff04, -+ GMAC_TXDMA_CTRL = 0xff08, -+ GMAC_TXDMA_FIRST_DESC = 0xff0c, -+ GMAC_TXDMA_CURR_DESC = 0xff10, -+ GMAC_RXDMA_CTRL = 0xff14, -+ GMAC_RXDMA_FIRST_DESC = 0xff18, -+ GMAC_RXDMA_CURR_DESC = 0xff1c, -+}; -+ -+/*******************************************/ -+/* the register structure of GMAC */ -+/*******************************************/ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit1_0004 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */ -+ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */ -+#else -+ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */ -+ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */ -+#endif -+ } bits; -+} GMAC_STA_ADD1_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit1_000c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int : 27; -+ unsigned int error : 1; /* enable receive of all error frames */ -+ unsigned int promiscuous : 1; /* enable receive of all frames */ -+ unsigned int broadcast : 1; /* enable receive of broadcast frames */ -+ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */ -+ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */ -+#else -+ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */ -+ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */ -+ unsigned int broadcast : 1; /* enable receive of broadcast frames */ -+ unsigned int promiscuous : 1; /* enable receive of all frames */ -+ unsigned int error : 1; /* enable receive of all error frames */ -+ unsigned int : 27; -+#endif -+ } bits; -+} GMAC_RX_FLTR_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit1_0018 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int : 10; -+ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */ -+ unsigned int rising_latch : 1; -+ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */ -+ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */ -+ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */ -+ unsigned int rgmii_en : 1; /* RGMII in-band status enable */ -+ unsigned int tx_fc_en : 1; /* TX flow control enable */ -+ unsigned int rx_fc_en : 1; /* RX flow control enable */ -+ unsigned int sim_test : 1; /* speed up timers in simulation */ -+ unsigned int dis_col : 1; /* disable 16 collisions abort function */ -+ unsigned int dis_bkoff : 1; /* disable back-off function */ -+ unsigned int max_len : 3; /* maximum receive frame length allowed */ -+ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */ -+ unsigned int : 1; /* reserved */ -+ unsigned int loop_back : 1; /* transmit data loopback enable */ -+ unsigned int dis_rx : 1; /* disable receive */ -+ unsigned int dis_tx : 1; /* disable transmit */ -+#else -+ unsigned int dis_tx : 1; /* disable transmit */ -+ unsigned int dis_rx : 1; /* disable receive */ -+ unsigned int loop_back : 1; /* transmit data loopback enable */ -+ unsigned int : 1; /* reserved */ -+ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */ -+ unsigned int max_len : 3; /* maximum receive frame length allowed */ -+ unsigned int dis_bkoff : 1; /* disable back-off function */ -+ unsigned int dis_col : 1; /* disable 16 collisions abort function */ -+ unsigned int sim_test : 1; /* speed up timers in simulation */ -+ unsigned int rx_fc_en : 1; /* RX flow control enable */ -+ unsigned int tx_fc_en : 1; /* TX flow control enable */ -+ unsigned int rgmii_en : 1; /* RGMII in-band status enable */ -+ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */ -+ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */ -+ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */ -+ unsigned int rising_latch : 1; -+ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */ -+ unsigned int : 10; -+#endif -+ } bits; -+} GMAC_CONFIG0_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit1_001c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int : 28; -+ unsigned int buf_size : 4; /* per packet buffer size */ -+#else -+ unsigned int buf_size : 4; /* per packet buffer size */ -+ unsigned int : 28; -+#endif -+ } bits; -+} GMAC_CONFIG1_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit1_0020 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int rel_threshold : 16; /* flow control release threshold */ -+ unsigned int set_threshold : 16; /* flow control set threshold */ -+#else -+ unsigned int set_threshold : 16; /* flow control set threshold */ -+ unsigned int rel_threshold : 16; /* flow control release threshold */ -+#endif -+ } bits; -+} GMAC_CONFIG2_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit1_0024 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int : 16; -+ unsigned int buf_num : 16; /* return buffer number from software */ -+#else -+ unsigned int buf_num : 16; /* return buffer number from software */ -+ unsigned int : 16; -+#endif -+ } bits; -+} GMAC_BNCR_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit1_0028 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int : 16; -+ unsigned int buf_remain : 16; /* remaining buffer number */ -+#else -+ unsigned int buf_remain : 16; /* remaining buffer number */ -+ unsigned int : 16; -+#endif -+ } bits; -+} GMAC_RBNR_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit1_002c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int : 25; -+ unsigned int mii_rmii : 2; /* PHY interface type */ -+ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */ -+ unsigned int duplex : 1; /* duplex mode */ -+ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */ -+ unsigned int link : 1; /* link status */ -+#else -+ unsigned int link : 1; /* link status */ -+ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */ -+ unsigned int duplex : 1; /* duplex mode */ -+ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */ -+ unsigned int mii_rmii : 2; /* PHY interface type */ -+ unsigned int : 25; -+#endif -+ } bits; -+} GMAC_STATUS_T; -+ -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit1_009 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int : 10; -+ unsigned int tx_fail : 1; /* Tx fail interrupt */ -+ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ -+ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ -+ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ -+ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ -+ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ -+ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ -+ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */ -+ unsigned int : 6; -+ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */ -+ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ -+ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ -+ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ -+ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ -+ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ -+ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ -+ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */ -+#else -+ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */ -+ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ -+ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ -+ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ -+ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ -+ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ -+ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ -+ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */ -+ unsigned int : 6; -+ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */ -+ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ -+ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ -+ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ -+ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ -+ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ -+ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ -+ unsigned int tx_fail : 1; /* Tx fail interrupt */ -+ unsigned int : 10; -+#endif -+ } bits; -+} GMAC_INT_MASK_T; -+ -+ -+/*******************************************/ -+/* the register structure of GMAC DMA */ -+/*******************************************/ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff00 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int : 7; /* reserved */ -+ unsigned int s_ahb_err : 1; /* Slave AHB bus error */ -+ unsigned int tx_err_code : 4; /* TxDMA error code */ -+ unsigned int rx_err_code : 4; /* RxDMA error code */ -+ unsigned int device_id : 12; -+ unsigned int revision_id : 4; -+#else -+ unsigned int revision_id : 4; -+ unsigned int device_id : 12; -+ unsigned int rx_err_code : 4; /* RxDMA error code */ -+ unsigned int tx_err_code : 4; /* TxDMA error code */ -+ unsigned int s_ahb_err : 1; /* Slave AHB bus error */ -+ unsigned int : 7; /* reserved */ -+#endif -+ } bits; -+} GMAC_DMA_DEVICE_ID_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff04 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int ts_finish : 1; /* finished tx interrupt */ -+ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ -+ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ -+ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ -+ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ -+ unsigned int rs_finish : 1; /* finished rx interrupt */ -+ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ -+ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ -+ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ -+ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ -+ unsigned int : 1; /* Tx fail interrupt */ -+ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ -+ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ -+ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ -+ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ -+ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ -+ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ -+ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */ -+ unsigned int : 1; -+ unsigned int : 1; -+ unsigned int : 3; -+ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ -+ unsigned int : 1; /* Tx fail interrupt mask */ -+ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ -+ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ -+ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ -+ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ -+ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ -+ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ -+ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */ -+#else -+ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */ -+ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ -+ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ -+ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ -+ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ -+ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ -+ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ -+ unsigned int : 1; /* Tx fail interrupt mask */ -+ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ -+ unsigned int : 3; -+ unsigned int : 1; -+ unsigned int : 1; -+ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */ -+ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ -+ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ -+ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ -+ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ -+ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ -+ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ -+ unsigned int : 1; /* Tx fail interrupt */ -+ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ -+ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ -+ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ -+ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ -+ unsigned int rs_finish : 1; /* finished rx interrupt */ -+ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ -+ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ -+ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ -+ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ -+ unsigned int ts_finish : 1; /* finished tx interrupt */ -+#endif -+ } bits; -+} GMAC_DMA_STATUS_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff08 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int td_start : 1; /* Start DMA transfer */ -+ unsigned int td_continue : 1; /* Continue DMA operation */ -+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int : 1; -+ unsigned int td_prot : 4; /* TxDMA protection control */ -+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ -+ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ -+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int : 14; -+#else -+ unsigned int : 14; -+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ -+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ -+ unsigned int td_prot : 4; /* TxDMA protection control */ -+ unsigned int : 1; -+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int td_continue : 1; /* Continue DMA operation */ -+ unsigned int td_start : 1; /* Start DMA transfer */ -+#endif -+ } bits; -+} GMAC_TXDMA_CTRL_T; -+ -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff0c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int td_first_des_ptr : 28;/* first descriptor address */ -+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ -+ unsigned int : 3; -+#else -+ unsigned int : 3; -+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ -+ unsigned int td_first_des_ptr : 28;/* first descriptor address */ -+#endif -+ } bits; -+} GMAC_TXDMA_FIRST_DESC_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff10 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int ndar : 28; /* next descriptor address */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int : 1; -+ unsigned int sof_eof : 2; -+#else -+ unsigned int sof_eof : 2; -+ unsigned int : 1; -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int ndar : 28; /* next descriptor address */ -+#endif -+ } bits; -+} GMAC_TXDMA_CURR_DESC_T; -+ -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff14 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int rd_start : 1; /* Start DMA transfer */ -+ unsigned int rd_continue : 1; /* Continue DMA operation */ -+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int : 1; -+ unsigned int rd_prot : 4; /* DMA protection control */ -+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ -+ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ -+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int : 14; -+#else -+ unsigned int : 14; -+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ -+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ -+ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ -+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ -+ unsigned int rd_prot : 4; /* DMA protection control */ -+ unsigned int : 1; -+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ -+ unsigned int rd_continue : 1; /* Continue DMA operation */ -+ unsigned int rd_start : 1; /* Start DMA transfer */ -+#endif -+ } bits; -+} GMAC_RXDMA_CTRL_T; -+ -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff18 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ -+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ -+ unsigned int : 3; -+#else -+ unsigned int : 3; -+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ -+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ -+#endif -+ } bits; -+} GMAC_RXDMA_FIRST_DESC_T; -+ -+typedef union -+{ -+ unsigned int bits32; -+ struct bit2_ff1c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int ndar : 28; /* next descriptor address */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int : 1; -+ unsigned int sof_eof : 2; -+#else -+ unsigned int sof_eof : 2; -+ unsigned int : 1; -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int ndar : 28; /* next descriptor address */ -+#endif -+ } bits; -+} GMAC_RXDMA_CURR_DESC_T; -+ -+ -+/********************************************/ -+/* Descriptor Format */ -+/********************************************/ -+ -+typedef struct descriptor_t -+{ -+ union frame_control_t -+ { -+ unsigned int bits32; -+ struct bits_0000 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int csum_state : 3; /* checksum error status */ -+ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */ -+ unsigned int frame_state: 3; /* reference Rx Status1 */ -+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ -+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ -+#else -+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ -+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ -+ unsigned int frame_state: 3; /* reference Rx Status1 */ -+ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */ -+ unsigned int csum_state : 3; /* checksum error status */ -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ -+#endif -+ } bits_rx; -+ -+ struct bits_0001 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int : 6; -+ unsigned int success_tx : 1; /* successful transmitted */ -+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ -+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ -+#else -+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ -+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ -+ unsigned int success_tx : 1; /* successful transmitted */ -+ unsigned int : 6; -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ -+#endif -+ } bits_tx_in; -+ -+ struct bits_0002 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int : 2; -+ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */ -+ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */ -+ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */ -+ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */ -+ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */ -+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ -+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ -+#else -+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ -+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ -+ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */ -+ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */ -+ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */ -+ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */ -+ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */ -+ unsigned int : 2; -+ unsigned int perr : 1; /* protocol error during processing this descriptor */ -+ unsigned int derr : 1; /* data error during processing this descriptor */ -+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ -+#endif -+ } bits_tx_out; -+ -+ } frame_ctrl; -+ -+ union flag_status_t -+ { -+ unsigned int bits32; -+ struct bits_0004 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int priority : 3; /* user priority extracted from receiving frame*/ -+ unsigned int cfi : 1; /* cfi extracted from receiving frame*/ -+ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */ -+ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */ -+#else -+ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */ -+ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */ -+ unsigned int cfi : 1; /* cfi extracted from receiving frame*/ -+ unsigned int priority : 3; /* user priority extracted from receiving frame*/ -+#endif -+ } bits_rx_status; -+ -+ struct bits_0005 -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int priority : 3; /* user priority to transmit*/ -+ unsigned int cfi : 1; /* cfi to transmit*/ -+ unsigned int vlan_id :12; /* VLAN ID to transmit */ -+ unsigned int frame_count:16; /* total tx frame byte count */ -+#else -+ unsigned int frame_count:16; /* total tx frame byte count */ -+ unsigned int vlan_id :12; /* VLAN ID to transmit */ -+ unsigned int cfi : 1; /* cfi to transmit*/ -+ unsigned int priority : 3; /* user priority to transmit*/ -+#endif -+ } bits_tx_flag; -+ } flag_status; -+ -+ unsigned int buf_adr; /* data buffer address */ -+ -+ union next_desc_t -+ { -+ unsigned int next_descriptor; -+ struct bits_000c -+ { -+#if (BIG_ENDIAN==1) -+ unsigned int ndar :28; /* next descriptor address */ -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int : 1; -+ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ -+ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ -+#else -+ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ -+ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ -+ unsigned int : 1; -+ unsigned int eofie : 1; /* end of frame interrupt enable */ -+ unsigned int ndar :28; /* next descriptor address */ -+#endif -+ } bits; -+ } next_desc; -+} GMAC_DESCRIPTOR_T; -+ -+typedef struct gmac_conf { -+ struct net_device *dev; -+ int portmap; -+ int vid; -+ int flag; /* 1: active 0: non-active */ -+} sys_gmac_conf; -+ -+struct gmac_private { -+ unsigned char *tx_bufs; /* Tx bounce buffer region. */ -+ unsigned char *rx_bufs; -+ GMAC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/ -+ GMAC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/ -+ GMAC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */ -+ GMAC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */ -+ GMAC_DESCRIPTOR_T *tx_finished_desc; -+ GMAC_DESCRIPTOR_T *rx_finished_desc; -+ unsigned long cur_tx; -+ unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */ -+ unsigned int tx_flag; -+ unsigned long dirty_tx; -+ unsigned char *tx_buf[TX_DESC_NUM]; /* Tx bounce buffers */ -+ dma_addr_t tx_desc_dma; /* physical TX descriptor address */ -+ dma_addr_t rx_desc_dma; /* physical RX descriptor address */ -+ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */ -+ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */ -+ struct net_device_stats stats; -+ pid_t thr_pid; -+ wait_queue_head_t thr_wait; -+ struct completion thr_exited; -+ spinlock_t lock; -+ int time_to_die; -+ unsigned int tx_desc_hdr[GMAC_PHY_IF]; /* the descriptor which sw can fill */ -+ unsigned int tx_desc_tail[GMAC_PHY_IF]; /* the descriptor which is not cleaned yet */ -+}; -+ -+ -+struct reg_ioctl_data { -+ unsigned int reg_addr; /* the register address */ -+ unsigned int val_in; /* data write to the register */ -+ unsigned int val_out; /* data read from the register */ -+}; -+ -+#ifdef CONFIG_SL2312_MPAGE -+typedef struct tx_data_t { -+ int freeable; // 1 when it's skb. it can be freed in tx interrupt handler -+ struct sk_buff* skb; // skb -+ int desc_in_use; // 1 when the desc is in use. 0 when desc is available. -+ long end_seq; // to find out packets are in seq. -+ // so this value is the seq of next packet. -+} tx_data; -+#endif -+ -+/************************************************************* -+ * Global Variable -+ *************************************************************/ -+struct semaphore sem_gmac; /* semaphore for share pins issue */ -+ -+/************************************************************* -+ * Static Global Variable -+ *************************************************************/ -+// static unsigned int MAC_BASE_ADDR = GMAC0_BASE; -+static unsigned int gmac_base_addr[GMAC_PHY_IF] = {GMAC0_BASE,GMAC1_BASE}; -+static unsigned int gmac_irq[GMAC_PHY_IF] = {IRQ_GMAC0,IRQ_GMAC1}; -+static struct net_device *gmac_dev[GMAC_PHY_IF]; -+ -+static unsigned int FLAG_SWITCH=0; /* if 1-->switch chip presented. if 0-->switch chip unpresented */ -+static unsigned int flow_control_enable[GMAC_PHY_IF] = {1,1}; -+static unsigned int pre_phy_status[GMAC_PHY_IF] = {LINK_DOWN,LINK_DOWN}; -+static unsigned int tx_desc_virtual_base[GMAC_PHY_IF]; -+static unsigned int rx_desc_virtual_base[GMAC_PHY_IF]; -+static unsigned int full_duplex = 1; -+static unsigned int speed = 1; -+#ifdef CONFIG_SL2312_MPAGE -+static tx_data tx_skb[GMAC_PHY_IF][TX_DESC_NUM]; -+#else -+static struct sk_buff *tx_skb[GMAC_PHY_IF][TX_DESC_NUM]; -+#endif -+static struct sk_buff *rx_skb[GMAC_PHY_IF][RX_DESC_NUM]; -+static unsigned int tx_desc_start_adr[GMAC_PHY_IF]; -+static unsigned int rx_desc_start_adr[GMAC_PHY_IF]; -+static unsigned char eth0_mac[6]= {0x00,0x50,0xc2,0x2b,0xd3,0x25}; -+static unsigned char eth1_mac[6]= {0x00,0x50,0xc2,0x2b,0xdf,0xfe}; -+static unsigned int next_tick = 3 * HZ; -+ -+static unsigned int phy_addr[GMAC_PHY_IF] = {0x01,0x02}; /* define PHY address */ -+ -+DECLARE_WAIT_QUEUE_HEAD(gmac_queue); -+//static wait_queue_t wait; -+ -+struct gmac_conf VLAN_conf[] = { -+#ifdef CONFIG_ADM_6999 -+ { (struct net_device *)0,0x7F,1 }, -+ { (struct net_device *)0,0x80,2 } -+#endif -+#ifdef CONFIG_ADM_6996 -+ { (struct net_device *)0,0x0F,1 }, -+ { (struct net_device *)0,0x10,2 } -+#endif -+}; -+ -+#define NUM_VLAN_IF (sizeof(VLAN_conf)/sizeof(struct gmac_conf)) -+ -+ -+/************************************************/ -+/* GMAC function declare */ -+/************************************************/ -+ -+unsigned int mii_read(unsigned char phyad,unsigned char regad); -+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value); -+static void gmac_set_phy_status(struct net_device *dev); -+static void gmac_get_phy_status(struct net_device *dev); -+static int gmac_phy_thread (void *data); -+static int gmac_set_mac_address(struct net_device *dev, void *addr); -+static void gmac_tx_timeout(struct net_device *dev); -+static void gmac_tx_packet_complete(struct net_device *dev); -+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev); -+static void gmac_set_rx_mode(struct net_device *dev); -+static void gmac_rx_packet(struct net_device *dev); -+static int gmac_open (struct net_device *dev); -+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -+ -+static unsigned int gmac_get_dev_index(struct net_device *dev); -+static unsigned int gmac_select_interface(struct net_device *dev); -+ -+#ifdef CONFIG_SL2312_MPAGE -+int printk_all(int dev_index, struct gmac_private* tp); -+#endif -+ -+/****************************************/ -+/* SPI Function Declare */ -+/****************************************/ -+void SPI_write(unsigned char addr,unsigned int value); -+unsigned int SPI_read(unsigned char table,unsigned char addr); -+void SPI_write_bit(char bit_EEDO); -+unsigned int SPI_read_bit(void); -+void SPI_default(void); -+void SPI_reset(unsigned char rstype,unsigned char port_cnt); -+void SPI_pre_st(void); -+void SPI_CS_enable(unsigned char enable); -+void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask); -+void SPI_Set_tag(unsigned int port,unsigned tag); -+void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask); -+unsigned int SPI_Get_PVID(unsigned int port); -+void SPI_mac_lock(unsigned int port, unsigned char lock); -+void SPI_get_port_state(unsigned int port); -+void SPI_port_enable(unsigned int port,unsigned char enable); -+unsigned int SPI_get_identifier(void); -+void SPI_get_status(unsigned int port); -+ -+/****************************************/ -+/* VLAN Function Declare */ -+/****************************************/ -+int getVLANfromdev (struct net_device *dev ); -+struct net_device * getdevfromVLAN( int VID); -+ -+ -+ -+/************************************************/ -+/* function body */ -+/************************************************/ -+#if 0 -+void hw_memcpy(void *to,const void *from,unsigned long n) -+{ -+ writel(from,SL2312_DRAM_CTRL_BASE+0x20); /* set source address */ -+ writel(to,SL2312_DRAM_CTRL_BASE+0x24); /* set destination address */ -+ writel(n,SL2312_DRAM_CTRL_BASE+0x28); /* set byte count */ -+ writel(0x00000001,SL2312_DRAM_CTRL_BASE+0x2c); -+ while (readl(SL2312_DRAM_CTRL_BASE+0x2c)); -+} -+#endif -+ -+static unsigned int gmac_read_reg(unsigned int addr) -+{ -+ unsigned int reg_val; -+// unsigned int flags; -+// spinlock_t lock; -+ -+// spin_lock_irqsave(&lock, flags); -+ reg_val = readl(addr); // Gary Chen -+// spin_unlock_irqrestore(&lock, flags); -+ return (reg_val); -+} -+ -+static void gmac_write_reg(unsigned int addr,unsigned int data,unsigned int bit_mask) -+{ -+ unsigned int reg_val; -+ //unsigned int *addr; -+// unsigned int flags; -+// spinlock_t lock; -+ -+// spin_lock_irqsave(&lock, flags); -+ reg_val = ( gmac_read_reg(addr) & (~bit_mask) ) | (data & bit_mask); -+ writel(reg_val,addr); -+// spin_unlock_irqrestore(&lock, flags); -+ return; -+} -+ -+ -+static void gmac_sw_reset(struct net_device *dev) -+{ -+ unsigned int index; -+ unsigned int reg_val; -+ -+ index = gmac_get_dev_index(dev); -+ if (index==0) -+ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000020; /* GMAC0 S/W reset */ -+ else -+ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000040; /* GMAC1 S/W reset */ -+ -+ writel(reg_val,GMAC_GLOBAL_BASE_ADDR+0x0c); -+ return; -+} -+ -+static void gmac_get_mac_address(void) -+{ -+#ifdef CONFIG_MTD -+ extern int get_vlaninfo(vlaninfo* vlan); -+ static vlaninfo vlan[2]; -+ -+ if (get_vlaninfo(&vlan[0])) -+ { -+ memcpy(eth0_mac,vlan[0].mac,6); -+ VLAN_conf[0].vid = vlan[0].vlanid; -+ VLAN_conf[0].portmap = vlan[0].vlanmap; -+ memcpy(eth1_mac,vlan[1].mac,6); -+ VLAN_conf[1].vid = vlan[1].vlanid; -+ VLAN_conf[1].portmap = vlan[1].vlanmap; -+ } -+#else -+ unsigned int reg_val; -+ -+ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac); -+ eth0_mac[4] = (reg_val & 0xff00) >> 8; -+ eth0_mac[5] = reg_val & 0x00ff; -+ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac); -+ eth1_mac[4] = (reg_val & 0xff00) >> 8; -+ eth1_mac[5] = reg_val & 0x00ff; -+#endif -+ return; -+} -+ -+static unsigned int gmac_get_dev_index(struct net_device *dev) -+{ -+ unsigned int i; -+ -+ /* get device index number */ -+ for (i=0;iMII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */ -+ else -+ phy_mode = 2; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */ -+ -+ /* set PHY operation mode */ -+ status = (phy_mode<<5) | 0x11 | (full_duplex<<3) | (speed<<1); -+ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status ,0x0000007f); -+ -+ /* set station MAC address1 and address2 */ -+ if (index==0) -+ memcpy(&sock.sa_data[0],ð0_mac[0],6); -+ else -+ memcpy(&sock.sa_data[0],ð1_mac[0],6); -+ gmac_set_mac_address(dev,(void *)&sock); -+ -+ /* set RX_FLTR register to receive all multicast packet */ -+ gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x0000001F,0x0000001f); -+ //gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x00000007,0x0000001f); -+ -+ /* set per packet buffer size */ -+ config1.bits32 = 0; -+ config1.bits.buf_size = 11; /* buffer size = 2048-byte */ -+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG1,config1.bits32,0x0000000f); -+ -+ /* set flow control threshold */ -+ config2_val.bits32 = 0; -+ config2_val.bits.set_threshold = RX_DESC_NUM/4; -+ config2_val.bits.rel_threshold = RX_DESC_NUM*3/4; -+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG2,config2_val.bits32,0xffffffff); -+ -+ /* init remaining buffer number register */ -+ rbnr_val.bits32 = 0; -+ rbnr_val.bits.buf_remain = RX_DESC_NUM; -+ rbnr_mask.bits32 = 0; -+ rbnr_mask.bits.buf_remain = 0xffff; -+ gmac_write_reg(gmac_base_addr[index] + GMAC_RBNR,rbnr_val.bits32,rbnr_mask.bits32); -+ -+ /* disable TX/RX and disable internal loop back */ -+ config0.bits32 = 0; -+ config0_mask.bits32 = 0; -+ config0.bits.max_len = 2; -+ if (flow_control_enable[index]==1) -+ { -+ config0.bits.tx_fc_en = 1; /* enable tx flow control */ -+ config0.bits.rx_fc_en = 1; /* enable rx flow control */ -+ printk("Enable MAC Flow Control...\n"); -+ } -+ else -+ { -+ config0.bits.tx_fc_en = 0; /* disable tx flow control */ -+ config0.bits.rx_fc_en = 0; /* disable rx flow control */ -+ printk("Disable MAC Flow Control...\n"); -+ } -+ config0.bits.dis_rx = 1; /* disable rx */ -+ config0.bits.dis_tx = 1; /* disable tx */ -+ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */ -+ config0.bits.inv_rx_clk = 0; -+ config0.bits.rising_latch = 1; -+ config0.bits.ipv4_tss_rx_en = 1; /* enable H/W to check ip checksum */ -+ config0.bits.ipv6_tss_rx_en = 1; /* enable H/W to check ip checksum */ -+ -+ config0_mask.bits.max_len = 7; -+ config0_mask.bits.tx_fc_en = 1; -+ config0_mask.bits.rx_fc_en = 1; -+ config0_mask.bits.dis_rx = 1; -+ config0_mask.bits.dis_tx = 1; -+ config0_mask.bits.loop_back = 1; -+ config0_mask.bits.inv_rx_clk = 1; -+ config0_mask.bits.rising_latch = 1; -+ config0_mask.bits.ipv4_tss_rx_en = 1; -+ config0_mask.bits.ipv6_tss_rx_en = 1; -+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); -+ -+ return (0); -+} -+ -+static void gmac_enable_tx_rx(struct net_device *dev) -+{ -+ GMAC_CONFIG0_T config0,config0_mask; -+ int dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ /* enable TX/RX */ -+ config0.bits32 = 0; -+ config0_mask.bits32 = 0; -+ config0.bits.dis_rx = 0; /* enable rx */ -+ config0.bits.dis_tx = 0; /* enable tx */ -+ config0_mask.bits.dis_rx = 1; -+ config0_mask.bits.dis_tx = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); -+} -+ -+static void gmac_disable_tx_rx(struct net_device *dev) -+{ -+ GMAC_CONFIG0_T config0,config0_mask; -+ int dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ /* enable TX/RX */ -+ config0.bits32 = 0; -+ config0_mask.bits32 = 0; -+ config0.bits.dis_rx = 1; /* disable rx */ -+ config0.bits.dis_tx = 1; /* disable tx */ -+ config0_mask.bits.dis_rx = 1; -+ config0_mask.bits.dis_tx = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); -+} -+ -+#ifdef CONFIG_SL_NAPI -+static int gmac_rx_poll_ga(struct net_device *dev, int *budget) -+{ -+ struct gmac_private *tp = dev->priv; -+ struct sk_buff *skb; -+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; -+ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; -+ GMAC_DESCRIPTOR_T *rx_desc; -+ unsigned int pkt_size; -+ unsigned int desc_count; -+ unsigned int vid; -+// unsigned int priority; -+ unsigned int own; -+ unsigned int good_frame = 0; -+ unsigned int index; -+ unsigned int dev_index; -+ int work = 0; -+ int work_done = 0; -+ int quota = min(dev->quota, *budget); -+ -+ dev_index = gmac_select_interface(dev); -+ -+ for (;;) -+ { -+ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31; -+ if (own == CPU) /* check owner bit */ -+ { -+ rx_desc = tp->rx_cur_desc; -+#if (GMAC_DEBUG==1) -+ /* check error interrupt */ -+ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) ) -+ { -+ printk("%s::Rx Descriptor Processing Error !!!\n",__func__); -+ } -+#endif -+ /* get frame information from the first descriptor of the frame */ -+ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/ -+#if (GMAC_DEBUG==1) -+ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */ -+#endif -+ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */ -+ if (vid == 0) -+ { -+ vid = 1; /* default vlan */ -+ } -+ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */ -+ -+ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */ -+ { -+ tp->stats.rx_bytes += pkt_size; -+ tp->stats.rx_packets++; -+ good_frame = 1; -+ } -+ else -+ { -+ tp->stats.rx_errors++; -+ good_frame = 0; -+ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state); -+ } -+ } -+ else -+ { -+ work_done = 1; -+ break; /* Rx process is completed */ -+ } -+ -+ if (good_frame == 1) -+ { -+ /* get rx skb buffer index */ -+ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ if (rx_skb[dev_index][index]) -+ { -+ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */ -+ rx_skb[dev_index][index]->dev = dev; -+ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY; -+ skb_put(rx_skb[dev_index][index],pkt_size); -+ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */ -+ netif_rx(rx_skb[dev_index][index]); /* socket rx */ -+ dev->last_rx = jiffies; -+ -+ /* allocate rx skb buffer */ -+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ -+ { -+ printk("%s::skb buffer allocation fail !\n",__func__); -+ } -+ rx_skb[dev_index][index] = skb; -+ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ -+ } -+ else -+ { -+ printk("%s::rx skb index error !\n",__func__); -+ } -+ } -+ -+ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */ -+ /* point to next rx descriptor */ -+ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]); -+ -+ /* release buffer to Remaining Buffer Number Register */ -+ if (flow_control_enable[dev_index] ==1) -+ { -+// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff); -+ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR)); -+ } -+ -+ if (work++ >= quota ) -+ { -+ break; -+ } -+ } -+ -+ /* if RX DMA process is stoped , restart it */ -+ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC); -+ if (rxdma_busy.bits.rd_busy == 0) -+ { -+ rxdma_ctrl.bits32 = 0; -+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ -+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ -+ rxdma_ctrl_mask.bits32 = 0; -+ rxdma_ctrl_mask.bits.rd_start = 1; -+ rxdma_ctrl_mask.bits.rd_continue = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); -+ } -+ -+ dev->quota -= work; -+ *budget -= work; -+ if (work_done==1) -+ { -+ /* Receive descriptor is empty now */ -+ netif_rx_complete(dev); -+ /* enable receive interrupt */ -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */ -+ return 0; -+ } -+ else -+ { -+ return -1; -+ } -+} -+ -+static int gmac_rx_poll_gb(struct net_device *dev, int *budget) -+{ -+ struct gmac_private *tp = dev->priv; -+ struct sk_buff *skb; -+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; -+ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; -+ GMAC_DESCRIPTOR_T *rx_desc; -+ unsigned int pkt_size; -+ unsigned int desc_count; -+ unsigned int vid; -+// unsigned int priority; -+ unsigned int own; -+ unsigned int good_frame = 0; -+ unsigned int index; -+ unsigned int dev_index; -+ int work = 0; -+ int work_done = 0; -+ int quota = min(dev->quota, *budget); -+ -+ dev_index = gmac_select_interface(dev); -+ -+ for (;;) -+ { -+ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31; -+ if (own == CPU) /* check owner bit */ -+ { -+ rx_desc = tp->rx_cur_desc; -+#if (GMAC_DEBUG==1) -+ /* check error interrupt */ -+ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) ) -+ { -+ printk("%s::Rx Descriptor Processing Error !!!\n",__func__); -+ } -+#endif -+ /* get frame information from the first descriptor of the frame */ -+ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/ -+#if (GMAC_DEBUG==1) -+ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */ -+#endif -+ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */ -+ if (vid == 0) -+ { -+ vid = 1; /* default vlan */ -+ } -+ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */ -+ -+ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */ -+ { -+ tp->stats.rx_bytes += pkt_size; -+ tp->stats.rx_packets++; -+ good_frame = 1; -+ } -+ else -+ { -+ tp->stats.rx_errors++; -+ good_frame = 0; -+ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state); -+ } -+ } -+ else -+ { -+ work_done = 1; -+ break; /* Rx process is completed */ -+ } -+ -+ if (good_frame == 1) -+ { -+ /* get rx skb buffer index */ -+ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ if (rx_skb[dev_index][index]) -+ { -+ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */ -+ rx_skb[dev_index][index]->dev = dev; -+ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY; -+ skb_put(rx_skb[dev_index][index],pkt_size); -+ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */ -+ netif_rx(rx_skb[dev_index][index]); /* socket rx */ -+ dev->last_rx = jiffies; -+ -+ /* allocate rx skb buffer */ -+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ -+ { -+ printk("%s::skb buffer allocation fail !\n",__func__); -+ } -+ rx_skb[dev_index][index] = skb; -+ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ -+ } -+ else -+ { -+ printk("%s::rx skb index error !\n",__func__); -+ } -+ } -+ -+ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */ -+ /* point to next rx descriptor */ -+ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]); -+ -+ /* release buffer to Remaining Buffer Number Register */ -+ if (flow_control_enable[dev_index] ==1) -+ { -+// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff); -+ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR)); -+ } -+ -+ if (work++ >= quota ) -+ { -+ break; -+ } -+ } -+ -+ /* if RX DMA process is stoped , restart it */ -+ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC); -+ if (rxdma_busy.bits.rd_busy == 0) -+ { -+ rxdma_ctrl.bits32 = 0; -+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ -+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ -+ rxdma_ctrl_mask.bits32 = 0; -+ rxdma_ctrl_mask.bits.rd_start = 1; -+ rxdma_ctrl_mask.bits.rd_continue = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); -+ } -+ -+ dev->quota -= work; -+ *budget -= work; -+ if (work_done==1) -+ { -+ /* Receive descriptor is empty now */ -+ netif_rx_complete(dev); -+ /* enable receive interrupt */ -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */ -+ return 0; -+ } -+ else -+ { -+ return -1; -+ } -+} -+ -+#endif -+ -+static void gmac_rx_packet(struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ struct sk_buff *skb; -+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; -+ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; -+ GMAC_DESCRIPTOR_T *rx_desc; -+ unsigned int pkt_size; -+ unsigned int desc_count; -+ unsigned int vid; -+// unsigned int priority; -+ unsigned int own; -+ unsigned int good_frame = 0; -+ unsigned int i,index; -+ unsigned int dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ for (i=0;i<256;i++) -+ { -+ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31; -+ if (own == CPU) /* check owner bit */ -+ { -+ rx_desc = tp->rx_cur_desc; -+#if (GMAC_DEBUG==1) -+ /* check error interrupt */ -+ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) ) -+ { -+ printk("%s::Rx Descriptor Processing Error !!!\n",__func__); -+ } -+#endif -+ /* get frame information from the first descriptor of the frame */ -+ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/ -+#if (GMAC_DEBUG==1) -+ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */ -+#endif -+ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */ -+ if (vid == 0) -+ { -+ vid = 1; /* default vlan */ -+ } -+ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */ -+ -+ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */ -+ { -+ tp->stats.rx_bytes += pkt_size; -+ tp->stats.rx_packets++; -+ good_frame = 1; -+ } -+ else -+ { -+ tp->stats.rx_errors++; -+ good_frame = 0; -+ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state); -+ } -+ } -+ else -+ { -+ break; /* Rx process is completed */ -+ } -+ -+ if (good_frame == 1) -+ { -+ /* get rx skb buffer index */ -+ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ if (rx_skb[dev_index][index]) -+ { -+ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */ -+ rx_skb[dev_index][index]->dev = dev; -+ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY; -+ skb_put(rx_skb[dev_index][index],pkt_size); -+ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */ -+ netif_rx(rx_skb[dev_index][index]); /* socket rx */ -+ dev->last_rx = jiffies; -+ -+ /* allocate rx skb buffer */ -+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ -+ { -+ printk("%s::skb buffer allocation fail !\n",__func__); -+ } -+ rx_skb[dev_index][index] = skb; -+ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ -+ } -+ else -+ { -+ printk("%s::rx skb index error !\n",__func__); -+ } -+ } -+ -+ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */ -+ /* point to next rx descriptor */ -+ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]); -+ -+ /* release buffer to Remaining Buffer Number Register */ -+ if (flow_control_enable[dev_index] ==1) -+ { -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff); -+ } -+ } -+ -+ /* if RX DMA process is stoped , restart it */ -+ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC); -+ if (rxdma_busy.bits.rd_busy == 0) -+ { -+ rxdma_ctrl.bits32 = 0; -+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ -+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ -+ rxdma_ctrl_mask.bits32 = 0; -+ rxdma_ctrl_mask.bits.rd_start = 1; -+ rxdma_ctrl_mask.bits.rd_continue = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); -+ } -+} -+ -+#ifdef CONFIG_SL2312_MPAGE -+static inline void free_tx_buf(int dev_index, int desc_index) -+{ -+ if (tx_skb[dev_index][desc_index].freeable && -+ tx_skb[dev_index][desc_index].skb) { -+ struct sk_buff* skb = tx_skb[dev_index][desc_index].skb; -+ //printk("free_skb %x, len %d\n", skb, skb->len); -+#ifdef CONFIG_TXINT_DISABLE -+ dev_kfree_skb(skb); -+#else -+ dev_kfree_skb_irq(skb); -+#endif -+ tx_skb[dev_index][desc_index].skb = 0; -+ } -+} -+ -+#ifdef CONFIG_TXINT_DISABLE -+static void gmac_tx_packet_complete(struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ GMAC_DESCRIPTOR_T *tx_hw_complete_desc, *next_desc; -+ unsigned int desc_cnt=0; -+ unsigned int i,index,dev_index; -+ unsigned int tx_current_descriptor = 0; -+ // int own_dma = 0; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ if (tx_skb[dev_index][index].desc_in_use && tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) { -+ free_tx_buf(dev_index, index); -+ tx_skb[dev_index][index].desc_in_use = 0; -+ } -+ next_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); -+ -+ for (;;) { -+ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); -+ if (next_desc == tx_hw_complete_desc) -+ break; -+ if (next_desc->frame_ctrl.bits_tx_in.own == CPU) { -+ if (next_desc->frame_ctrl.bits_tx_in.success_tx == 1) { -+ tp->stats.tx_bytes += next_desc->flag_status.bits_tx_flag.frame_count; -+ tp->stats.tx_packets ++; -+ } else { -+ tp->stats.tx_errors++; -+ } -+ desc_cnt = next_desc->frame_ctrl.bits_tx_in.desc_count; -+ for (i=1; iframe_ctrl.bits_tx_in.own = CPU; -+ free_tx_buf(dev_index, index); -+ tx_skb[dev_index][index].desc_in_use = 0; -+ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1); -+ /* release Tx descriptor to CPU */ -+ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); -+ } -+ /* get tx skb buffer index */ -+ index = ((unsigned int)next_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ /* free skb buffer */ -+ next_desc->frame_ctrl.bits_tx_in.own = CPU; -+ free_tx_buf(dev_index, index); -+ tx_skb[dev_index][index].desc_in_use = 0; -+ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1); -+ tp->tx_finished_desc = next_desc; -+// printk("finish tx_desc index %d\n", index); -+ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); -+ } -+ else -+ break; -+ } -+ if (netif_queue_stopped(dev)) -+ { -+ netif_wake_queue(dev); -+ } -+ -+} -+#else -+static void gmac_tx_packet_complete(struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ GMAC_DESCRIPTOR_T *tx_hw_complete_desc; -+ unsigned int desc_cnt=0; -+ unsigned int i,index,dev_index; -+ unsigned int tx_current_descriptor = 0; -+ // int own_dma = 0; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ -+ /* check tx status and accumulate tx statistics */ -+ for (;;) -+ { -+ -+ for (i=0;i<1000;i++) -+ { -+ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC); -+ if ( ((tx_current_descriptor & 0x00000003)==0x00000003) || /* only one descriptor */ -+ ((tx_current_descriptor & 0x00000003)==0x00000001) ) /* the last descriptor */ -+ { -+ break; -+ } -+ udelay(1); -+ } -+ if (i==1000) -+ { -+// gmac_dump_register(dev); -+// printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor); -+// printk_all(dev_index, tp); -+ continue; -+ } -+ -+ /* get tx H/W completed descriptor virtual address */ -+ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((tx_current_descriptor & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); -+// tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); -+ if (tp->tx_finished_desc == tx_hw_complete_desc ) // || -+ //tx_skb[dev_index][index].desc_in_use ) /* complete tx processing */ -+ { -+ break; -+ } -+ -+ for (;;) -+ { -+ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) -+ { -+ #if (GMAC_DEBUG==1) -+ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) || -+ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) ) -+ { -+ printk("%s::Descriptor Processing Error !!!\n",__func__); -+ } -+ #endif -+ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1) -+ { -+ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count; -+ tp->stats.tx_packets ++; -+ } -+ else -+ { -+ tp->stats.tx_errors++; -+ } -+ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count; -+ for (i=1; itx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU; -+ free_tx_buf(dev_index, index); -+ tx_skb[dev_index][index].desc_in_use = 0; -+ /* release Tx descriptor to CPU */ -+ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); -+ } -+ /* get tx skb buffer index */ -+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ /* free skb buffer */ -+ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU; -+ free_tx_buf(dev_index, index); -+ tx_skb[dev_index][index].desc_in_use = 0; -+ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); -+ -+ if (tp->tx_finished_desc == tx_hw_complete_desc ) -+ { -+ break; -+ } -+ } -+ else -+ { -+ break; -+ } -+ } -+ } -+ -+ if (netif_queue_stopped(dev)) -+ { -+ netif_wake_queue(dev); -+ } -+ -+} -+#endif -+#else -+ -+static void gmac_tx_packet_complete(struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ GMAC_DESCRIPTOR_T *tx_hw_complete_desc; -+ unsigned int desc_cnt=0; -+ unsigned int i,index,dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ /* get tx H/W completed descriptor virtual address */ -+ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); -+ /* check tx status and accumulate tx statistics */ -+ for (;;) -+ { -+ if (tp->tx_finished_desc == tx_hw_complete_desc) /* complete tx processing */ -+ { -+ break; -+ } -+ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) -+ { -+#if (GMAC_DEBUG==1) -+ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) || -+ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) ) -+ { -+ printk("%s::Descriptor Processing Error !!!\n",__func__); -+ } -+#endif -+ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1) -+ { -+ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count; -+ tp->stats.tx_packets ++; -+ } -+ else -+ { -+ tp->stats.tx_errors++; -+ } -+ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count; -+ for (i=1; itx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ /* free skb buffer */ -+ if (tx_skb[dev_index][index]) -+ { -+ dev_kfree_skb_irq(tx_skb[dev_index][index]); -+ } -+ /* release Tx descriptor to CPU */ -+ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); -+ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU; -+ } -+ /* get tx skb buffer index */ -+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ /* free skb buffer */ -+ if (tx_skb[dev_index][index]) -+ { -+ dev_kfree_skb_irq(tx_skb[dev_index][index]); -+ } -+ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); -+ } -+ } -+ -+ if (netif_queue_stopped(dev)) -+ { -+ netif_wake_queue(dev); -+ } -+ -+} -+ -+ -+#endif -+ -+#if 0 -+static void gmac_weird_interrupt(struct net_device *dev) -+{ -+ gmac_dump_register(dev); -+} -+#endif -+ -+/* The interrupt handler does all of the Rx thread work and cleans up -+ after the Tx thread. */ -+static irqreturn_t gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -+{ -+ struct net_device *dev = (struct net_device *)dev_instance; -+ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; -+// GMAC_TXDMA_FIRST_DESC_T txdma_busy; -+// GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask; -+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; -+ GMAC_DMA_STATUS_T status; -+ unsigned int i,dev_index; -+ int handled = 0; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ handled = 1; -+ -+#ifdef CONFIG_SL_NAPI -+ disable_irq(gmac_irq[dev_index]); /* disable GMAC interrupt */ -+ -+ status.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS); /* read DMA status */ -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,status.bits32,status.bits32); /* clear DMA status */ -+ -+ if (status.bits.rx_overrun == 1) -+ { -+ printk("%s::RX Overrun !!!%d\n",__func__,gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RBNR)); -+ gmac_dump_register(dev); -+ /* if RX DMA process is stoped , restart it */ -+ rxdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC) ; -+ if (rxdma_busy.bits.rd_busy == 0) -+ { -+ /* restart Rx DMA process */ -+ rxdma_ctrl.bits32 = 0; -+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ -+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ -+ rxdma_ctrl_mask.bits32 = 0; -+ rxdma_ctrl_mask.bits.rd_start = 1; -+ rxdma_ctrl_mask.bits.rd_continue = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); -+ } -+ } -+ -+ /* process rx packet */ -+ if (netif_running(dev) && ((status.bits.rs_eofi==1)||(status.bits.rs_finish==1))) -+ { -+ if (likely(netif_rx_schedule_prep(dev))) -+ { -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0,0x0007c000); /* disable rx interrupt */ -+ __netif_rx_schedule(dev); -+ } -+ } -+#ifndef CONFIG_TXINT_DISABLE -+ /* process tx packet */ -+ if (netif_running(dev) && ((status.bits.ts_eofi==1)||(status.bits.ts_finish==1))) -+ { -+ gmac_tx_packet_complete(dev); -+ } -+#endif -+ -+ enable_irq(gmac_irq[dev_index]); /* enable GMAC interrupt */ -+ return IRQ_RETVAL(handled); -+#endif -+ -+ /* disable GMAC interrupt */ -+ disable_irq(gmac_irq[dev_index]); -+ for (i=0;ipriv; -+ GMAC_TXDMA_CURR_DESC_T tx_desc; -+ GMAC_RXDMA_CURR_DESC_T rx_desc; -+ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask; -+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; -+ GMAC_DMA_STATUS_T dma_status,dma_status_mask; -+ int dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ /* program TxDMA Current Descriptor Address register for first descriptor */ -+ tx_desc.bits32 = (unsigned int)(tp->tx_desc_dma); -+ tx_desc.bits.eofie = 1; -+ tx_desc.bits.sof_eof = 0x03; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC,tx_desc.bits32,0xffffffff); -+ gmac_write_reg(gmac_base_addr[dev_index] + 0xff2c,tx_desc.bits32,0xffffffff); /* tx next descriptor address */ -+ -+ /* program RxDMA Current Descriptor Address register for first descriptor */ -+ rx_desc.bits32 = (unsigned int)(tp->rx_desc_dma); -+ rx_desc.bits.eofie = 1; -+ rx_desc.bits.sof_eof = 0x03; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CURR_DESC,rx_desc.bits32,0xffffffff); -+ gmac_write_reg(gmac_base_addr[dev_index] + 0xff3c,rx_desc.bits32,0xffffffff); /* rx next descriptor address */ -+ -+ /* enable GMAC interrupt & disable loopback */ -+ dma_status.bits32 = 0; -+ dma_status.bits.loop_back = 0; /* disable DMA loop-back mode */ -+// dma_status.bits.m_tx_fail = 1; -+ dma_status.bits.m_cnt_full = 1; -+ dma_status.bits.m_rx_pause_on = 1; -+ dma_status.bits.m_tx_pause_on = 1; -+ dma_status.bits.m_rx_pause_off = 1; -+ dma_status.bits.m_tx_pause_off = 1; -+ dma_status.bits.m_rx_overrun = 1; -+ dma_status.bits.m_link_change = 1; -+ dma_status_mask.bits32 = 0; -+ dma_status_mask.bits.loop_back = 1; -+// dma_status_mask.bits.m_tx_fail = 1; -+ dma_status_mask.bits.m_cnt_full = 1; -+ dma_status_mask.bits.m_rx_pause_on = 1; -+ dma_status_mask.bits.m_tx_pause_on = 1; -+ dma_status_mask.bits.m_rx_pause_off = 1; -+ dma_status_mask.bits.m_tx_pause_off = 1; -+ dma_status_mask.bits.m_rx_overrun = 1; -+ dma_status_mask.bits.m_link_change = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,dma_status.bits32,dma_status_mask.bits32); -+ -+ /* program tx dma control register */ -+ txdma_ctrl.bits32 = 0; -+ txdma_ctrl.bits.td_start = 0; /* start TX DMA transfer */ -+ txdma_ctrl.bits.td_continue = 0; /* continue Tx DMA operation */ -+ txdma_ctrl.bits.td_chain_mode = 1; /* chain mode */ -+ txdma_ctrl.bits.td_prot = 0; -+ txdma_ctrl.bits.td_burst_size = 2; /* DMA burst size for every AHB request */ -+ txdma_ctrl.bits.td_bus = 2; /* peripheral bus width */ -+ txdma_ctrl.bits.td_endian = 0; /* little endian */ -+#ifdef CONFIG_TXINT_DISABLE -+ txdma_ctrl.bits.td_finish_en = 0; /* DMA finish event interrupt disable */ -+#else -+ txdma_ctrl.bits.td_finish_en = 1; /* DMA finish event interrupt enable */ -+#endif -+ txdma_ctrl.bits.td_fail_en = 1; /* DMA fail interrupt enable */ -+ txdma_ctrl.bits.td_perr_en = 1; /* protocol failure interrupt enable */ -+ txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */ -+ //txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */ -+#ifdef CONFIG_TXINT_DISABLE -+ txdma_ctrl.bits.td_eof_en = 0; /* end of frame interrupt disable */ -+#else -+ txdma_ctrl.bits.td_eof_en = 1; /* end of frame interrupt enable */ -+#endif -+ txdma_ctrl_mask.bits32 = 0; -+ txdma_ctrl_mask.bits.td_start = 1; -+ txdma_ctrl_mask.bits.td_continue = 1; -+ txdma_ctrl_mask.bits.td_chain_mode = 1; -+ txdma_ctrl_mask.bits.td_prot = 15; -+ txdma_ctrl_mask.bits.td_burst_size = 3; -+ txdma_ctrl_mask.bits.td_bus = 3; -+ txdma_ctrl_mask.bits.td_endian = 1; -+ txdma_ctrl_mask.bits.td_finish_en = 1; -+ txdma_ctrl_mask.bits.td_fail_en = 1; -+ txdma_ctrl_mask.bits.td_perr_en = 1; -+ txdma_ctrl_mask.bits.td_eod_en = 1; -+ //txdma_ctrl_mask.bits.td_eod_en = 1; -+ txdma_ctrl_mask.bits.td_eof_en = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32); -+ -+ /* program rx dma control register */ -+ rxdma_ctrl.bits32 = 0; -+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ -+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ -+ rxdma_ctrl.bits.rd_chain_mode = 1; /* chain mode */ -+ rxdma_ctrl.bits.rd_prot = 0; -+ rxdma_ctrl.bits.rd_burst_size = 2; /* DMA burst size for every AHB request */ -+ rxdma_ctrl.bits.rd_bus = 2; /* peripheral bus width */ -+ rxdma_ctrl.bits.rd_endian = 0; /* little endian */ -+ rxdma_ctrl.bits.rd_finish_en = 1; /* DMA finish event interrupt enable */ -+ rxdma_ctrl.bits.rd_fail_en = 1; /* DMA fail interrupt enable */ -+ rxdma_ctrl.bits.rd_perr_en = 1; /* protocol failure interrupt enable */ -+ rxdma_ctrl.bits.rd_eod_en = 0; /* disable Rx End of Descriptor Interrupt */ -+ rxdma_ctrl.bits.rd_eof_en = 1; /* end of frame interrupt enable */ -+ rxdma_ctrl_mask.bits32 = 0; -+ rxdma_ctrl_mask.bits.rd_start = 1; -+ rxdma_ctrl_mask.bits.rd_continue = 1; -+ rxdma_ctrl_mask.bits.rd_chain_mode = 1; -+ rxdma_ctrl_mask.bits.rd_prot = 15; -+ rxdma_ctrl_mask.bits.rd_burst_size = 3; -+ rxdma_ctrl_mask.bits.rd_bus = 3; -+ rxdma_ctrl_mask.bits.rd_endian = 1; -+ rxdma_ctrl_mask.bits.rd_finish_en = 1; -+ rxdma_ctrl_mask.bits.rd_fail_en = 1; -+ rxdma_ctrl_mask.bits.rd_perr_en = 1; -+ rxdma_ctrl_mask.bits.rd_eod_en = 1; -+ rxdma_ctrl_mask.bits.rd_eof_en = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); -+ return; -+} -+ -+static void gmac_hw_stop(struct net_device *dev) -+{ -+ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask; -+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; -+ int dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ /* program tx dma control register */ -+ txdma_ctrl.bits32 = 0; -+ txdma_ctrl.bits.td_start = 0; -+ txdma_ctrl.bits.td_continue = 0; -+ txdma_ctrl_mask.bits32 = 0; -+ txdma_ctrl_mask.bits.td_start = 1; -+ txdma_ctrl_mask.bits.td_continue = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32); -+ /* program rx dma control register */ -+ rxdma_ctrl.bits32 = 0; -+ rxdma_ctrl.bits.rd_start = 0; /* stop RX DMA transfer */ -+ rxdma_ctrl.bits.rd_continue = 0; /* stop continue RX DMA operation */ -+ rxdma_ctrl_mask.bits32 = 0; -+ rxdma_ctrl_mask.bits.rd_start = 1; -+ rxdma_ctrl_mask.bits.rd_continue = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); -+} -+ -+static int gmac_init_desc_buf(struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ struct sk_buff *skb; -+ dma_addr_t tx_first_desc_dma=0; -+ dma_addr_t rx_first_desc_dma=0; -+ dma_addr_t rx_first_buf_dma=0; -+ unsigned int i,index; -+ -+ printk("Descriptor buffer init......\n"); -+ -+ /* get device index number */ -+ index = gmac_get_dev_index(dev); -+#ifdef CONFIG_SL2312_MPAGE -+ for (i=0; itx_desc = DMA_MALLOC(TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->tx_desc_dma); -+ tx_desc_virtual_base[index] = (unsigned int)tp->tx_desc - (unsigned int)tp->tx_desc_dma; -+ memset(tp->tx_desc,0x00,TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T)); -+ tp->rx_desc = DMA_MALLOC(RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->rx_desc_dma); -+ rx_desc_virtual_base[index] = (unsigned int)tp->rx_desc - (unsigned int)tp->rx_desc_dma; -+ memset(tp->rx_desc,0x00,RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T)); -+ tx_desc_start_adr[index] = (unsigned int)tp->tx_desc; /* for tx skb index calculation */ -+ rx_desc_start_adr[index] = (unsigned int)tp->rx_desc; /* for rx skb index calculation */ -+ printk("tx_desc = %08x\n",(unsigned int)tp->tx_desc); -+ printk("rx_desc = %08x\n",(unsigned int)tp->rx_desc); -+ printk("tx_desc_dma = %08x\n",tp->tx_desc_dma); -+ printk("rx_desc_dma = %08x\n",tp->rx_desc_dma); -+ -+ if (tp->tx_desc==0x00 || tp->rx_desc==0x00) -+ { -+ free_irq(dev->irq, dev); -+ -+ if (tp->tx_desc) -+ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->tx_desc_dma); -+ if (tp->rx_desc) -+ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->rx_desc_dma); -+ return -ENOMEM; -+ } -+ -+ /* TX descriptors initial */ -+ tp->tx_cur_desc = tp->tx_desc; /* virtual address */ -+ tp->tx_finished_desc = tp->tx_desc; /* virtual address */ -+ tx_first_desc_dma = tp->tx_desc_dma; /* physical address */ -+ for (i = 1; i < TX_DESC_NUM; i++) -+ { -+ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU; /* set owner to CPU */ -+ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; /* set tx buffer size for descriptor */ -+ tp->tx_desc_dma = tp->tx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next tx descriptor DMA address */ -+ tp->tx_desc->next_desc.next_descriptor = tp->tx_desc_dma | 0x0000000b; -+ tp->tx_desc = &tp->tx_desc[1] ; /* next tx descriptor virtual address */ -+ } -+ /* the last descriptor will point back to first descriptor */ -+ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU; -+ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; -+ tp->tx_desc->next_desc.next_descriptor = tx_first_desc_dma | 0x0000000b; -+ tp->tx_desc = tp->tx_cur_desc; -+ tp->tx_desc_dma = tx_first_desc_dma; -+ -+ /* RX descriptors initial */ -+ tp->rx_cur_desc = tp->rx_desc; /* virtual address */ -+ rx_first_desc_dma = tp->rx_desc_dma; /* physical address */ -+ for (i = 1; i < RX_DESC_NUM; i++) -+ { -+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ -+ { -+ printk("%s::skb buffer allocation fail !\n",__func__); -+ } -+ rx_skb[index][i-1] = skb; -+ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ -+ tp->rx_desc->frame_ctrl.bits_rx.own = DMA; /* set owner bit to DMA */ -+ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE; /* set rx buffer size for descriptor */ -+ tp->rx_bufs_dma = tp->rx_bufs_dma + RX_BUF_SIZE; /* point to next buffer address */ -+ tp->rx_desc_dma = tp->rx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next rx descriptor DMA address */ -+ tp->rx_desc->next_desc.next_descriptor = tp->rx_desc_dma | 0x0000000b; -+ tp->rx_desc = &tp->rx_desc[1]; /* next rx descriptor virtual address */ -+ } -+ /* the last descriptor will point back to first descriptor */ -+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ -+ { -+ printk("%s::skb buffer allocation fail !\n",__func__); -+ } -+ rx_skb[index][i-1] = skb; -+ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ -+ tp->rx_desc->frame_ctrl.bits_rx.own = DMA; -+ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE; -+ tp->rx_desc->next_desc.next_descriptor = rx_first_desc_dma | 0x0000000b; -+ tp->rx_desc = tp->rx_cur_desc; -+ tp->rx_desc_dma = rx_first_desc_dma; -+ tp->rx_bufs_dma = rx_first_buf_dma; -+ -+ for (i=0; itx_desc_hdr[i] = 0; -+ tp->tx_desc_tail[i] = 0; -+ } -+ return (0); -+} -+ -+static int gmac_clear_counter (struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ unsigned int dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+// tp = gmac_dev[index]->priv; -+ /* clear counter */ -+ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS); -+ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS); -+ tp->stats.tx_bytes = 0; -+ tp->stats.tx_packets = 0; -+ tp->stats.tx_errors = 0; -+ tp->stats.rx_bytes = 0; -+ tp->stats.rx_packets = 0; -+ tp->stats.rx_errors = 0; -+ tp->stats.rx_dropped = 0; -+ return (0); -+} -+ -+static int gmac_open (struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ int retval; -+ -+ gmac_select_interface(dev); -+ -+ /* chip reset */ -+ gmac_sw_reset(dev); -+ -+ /* allocates tx/rx descriptor and buffer memory */ -+ gmac_init_desc_buf(dev); -+ -+ /* get mac address from FLASH */ -+ gmac_get_mac_address(); -+ -+ /* set PHY register to start autonegition process */ -+ gmac_set_phy_status(dev); -+ -+ /* GMAC initialization */ -+ if (gmac_init_chip(dev)) -+ { -+ printk (KERN_ERR "GMAC init fail\n"); -+ } -+ -+ /* start DMA process */ -+ gmac_hw_start(dev); -+ -+ /* enable tx/rx register */ -+ gmac_enable_tx_rx(dev); -+ -+ /* clear statistic counter */ -+ gmac_clear_counter(dev); -+ -+ netif_start_queue (dev); -+ -+ /* hook ISR */ -+ retval = request_irq (dev->irq, gmac_interrupt, SA_INTERRUPT, dev->name, dev); -+ if (retval) -+ return retval; -+ -+ if(!FLAG_SWITCH) -+ { -+ init_waitqueue_head (&tp->thr_wait); -+ init_completion(&tp->thr_exited); -+ -+ tp->time_to_die = 0; -+ tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES); -+ if (tp->thr_pid < 0) -+ { -+ printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name); -+ } -+ } -+ return (0); -+} -+ -+static int gmac_close(struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ unsigned int i,dev_index; -+ unsigned int ret; -+ -+ dev_index = gmac_get_dev_index(dev); -+ -+ /* stop tx/rx packet */ -+ gmac_disable_tx_rx(dev); -+ -+ /* stop the chip's Tx and Rx DMA processes */ -+ gmac_hw_stop(dev); -+ -+ netif_stop_queue(dev); -+ -+ /* disable interrupts by clearing the interrupt mask */ -+ synchronize_irq(); -+ free_irq(dev->irq,dev); -+ -+ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->tx_desc_dma); -+ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->rx_desc_dma); -+ -+#ifdef CONFIG_SL2312_MPAGE -+// kfree(tx_skb); -+#endif -+ -+ for (i=0;ithr_pid >= 0) -+ { -+ tp->time_to_die = 1; -+ wmb(); -+ ret = kill_proc (tp->thr_pid, SIGTERM, 1); -+ if (ret) -+ { -+ printk (KERN_ERR "%s: unable to signal thread\n", dev->name); -+ return ret; -+ } -+// wait_for_completion (&tp->thr_exited); -+ } -+ } -+ -+ return (0); -+} -+ -+#ifdef CONFIG_SL2312_MPAGE -+int printk_all(int dev_index, struct gmac_private* tp) -+{ -+ int i=0; -+ unsigned int tx_current_descriptor = 0; -+ int hw_index; -+ int fi; -+ GMAC_DESCRIPTOR_T* tmp_desc; -+ -+ GMAC_DESCRIPTOR_T* cur_desc=tp->tx_cur_desc; -+ fi = ((unsigned int)cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ printk("tmp_desc %x, id %d\n", (int)cur_desc, fi); -+ -+ tmp_desc = (GMAC_DESCRIPTOR_T*)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0) + tx_desc_virtual_base[dev_index]); -+ hw_index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/ sizeof(GMAC_DESCRIPTOR_T); -+ printk("hd_desc %x, ind %d, fin desc %x\n",(int)tmp_desc, hw_index, (int)tp->tx_finished_desc); -+ -+ for (i=0; i ", fi, hw_index); -+ printk("fc %8x ", tmp_desc->frame_ctrl.bits32); -+ printk("fs %8x ", tmp_desc->flag_status.bits32); -+ printk("fb %8x ", tmp_desc->buf_adr); -+ printk("fd %8x\n", tmp_desc->next_desc.next_descriptor); -+ tmp_desc = (GMAC_DESCRIPTOR_T*)((tmp_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); -+ fi = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ } -+ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC); -+ printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor); -+ printk("%s: interrupt status = %x \n",__func__,int_status); -+ return 0; -+} -+ -+int cleanup_desc(int dev_index, struct gmac_private* tp) -+{ -+ int i=0; -+ int index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T); -+ GMAC_DESCRIPTOR_T* fill_desc = tp->tx_cur_desc; -+ -+ for (i=0; i< TX_DESC_NUM; i++) -+ { -+ fill_desc->frame_ctrl.bits_tx_out.own = CPU; -+ fill_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; -+ tx_skb[dev_index][index].desc_in_use = 0; -+ free_tx_buf(dev_index, index); -+ printk("cleanup di %d\n", index); -+ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); -+ index++; -+ if (index > TX_DESC_NUM) -+ index = 0; -+ } -+ return 1; -+} -+ -+size_t get_available_tx_desc(struct net_device* dev, int dev_index) -+{ -+ struct gmac_private *tp = dev->priv; -+ unsigned int desc_hdr = tp->tx_desc_hdr[dev_index]; -+ unsigned int desc_tail = tp->tx_desc_tail[dev_index]; -+ int available_desc_num = (TX_DESC_NUM - desc_hdr + desc_tail) & (TX_DESC_NUM-1); -+ if (!available_desc_num) { -+ if (tx_skb[dev_index][desc_hdr].desc_in_use) -+ return 0; -+ else -+ return TX_DESC_NUM; -+ } -+ return available_desc_num; -+} -+ -+int check_free_tx_desc(int dev_index, int n, GMAC_DESCRIPTOR_T* desc) -+{ -+ int i,index; -+ GMAC_DESCRIPTOR_T* tmp_desc = desc; -+ -+ if (n > TX_DESC_NUM) -+ return 0; -+ -+ index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T); -+ for (i=0; i> 12) & 0x000F) -+ -+inline int fill_in_desc(int dev_index, GMAC_DESCRIPTOR_T *desc, char* data, int len, int total_len, int sof, int freeable, int ownership, struct sk_buff* skb) -+{ -+ int index = ((unsigned int)desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ -+ if (desc->frame_ctrl.bits_tx_in.own == CPU) -+ { -+ tx_skb[dev_index][index].freeable = freeable; -+ if ((sof & 0x01) && skb) { -+ tx_skb[dev_index][index].skb = skb; -+ } -+ else -+ tx_skb[dev_index][index].skb = 0; -+ -+ if (sof != 2) -+ tx_skb[dev_index][index].desc_in_use = 1; -+ else -+ tx_skb[dev_index][index].desc_in_use = 0; -+ -+ consistent_sync(data, len, PCI_DMA_TODEVICE); -+ desc->buf_adr = (unsigned int)__pa(data); -+ desc->frame_ctrl.bits_tx_out.buffer_size = len; -+ desc->flag_status.bits_tx_flag.frame_count = total_len; -+ desc->next_desc.bits.eofie = 1; -+ desc->next_desc.bits.sof_eof = sof; -+ desc->frame_ctrl.bits_tx_out.vlan_enable = 0; -+ desc->frame_ctrl.bits_tx_out.ip_csum_en = 1; /* TSS IPv4 IP header checksum enable */ -+ desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 1; /* TSS IPv6 tx enable */ -+ desc->frame_ctrl.bits_tx_out.tcp_csum_en = 1; /* TSS TCP checksum enable */ -+ desc->frame_ctrl.bits_tx_out.udp_csum_en = 1; /* TSS UDP checksum enable */ -+ wmb(); -+ desc->frame_ctrl.bits_tx_out.own = ownership; -+// consistent_sync(desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE); -+ } -+ return 0; -+} -+#endif -+ -+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask; -+ GMAC_TXDMA_FIRST_DESC_T txdma_busy; -+ unsigned int len = skb->len; -+ unsigned int dev_index; -+ static unsigned int pcount = 0; -+#ifdef CONFIG_SL2312_MPAGE -+ GMAC_DESCRIPTOR_T *fill_desc; -+ int snd_pages = skb_shinfo(skb)->nr_frags; /* get number of descriptor */ -+ int desc_needed = 1; // for jumbo packet, one descriptor is enough. -+ int header_len = skb->len; -+ struct iphdr *ip_hdr; -+ struct tcphdr *tcp_hdr; -+ int tcp_hdr_len; -+ int data_len; -+ int prv_index; -+ long seq_num; -+ int first_desc_index; -+ int ownership, freeable; -+ int eof; -+ int i=0; -+#endif -+#ifdef CONFIG_TXINT_DISABLE -+ int available_desc_cnt = 0; -+#endif -+ -+ dev_index = gmac_select_interface(dev); -+ -+#ifdef CONFIG_TXINT_DISABLE -+ available_desc_cnt = get_available_tx_desc(dev, dev_index); -+ -+ if (available_desc_cnt < (TX_DESC_NUM >> 2)) { -+ gmac_tx_packet_complete(dev); -+ } -+#endif -+ -+#ifdef CONFIG_SL2312_MPAGE -+ -+ fill_desc = tp->tx_cur_desc; -+ if(!fill_desc) { -+ printk("cur_desc is NULL!\n"); -+ return -1; -+ } -+ -+ if (storlink_ctl.recvfile==2) -+ { -+ printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len); -+ } -+ -+ if (snd_pages) -+ desc_needed += snd_pages; /* decriptors needed for this large packet */ -+ -+ if (!check_free_tx_desc(dev_index, desc_needed, fill_desc)) { -+ printk("no available desc!\n"); -+ gmac_dump_register(dev); -+ printk_all(dev_index, tp); -+ tp->stats.tx_dropped++; -+ if (pcount++ > 10) -+ { -+ for (;;); -+ } -+ return -1; -+ } -+ -+ first_desc_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ -+ /* check if the tcp packet is in order*/ -+ ip_hdr = (struct iphdr*) &(skb->data[14]); -+ tcp_hdr = (struct tcphdr*) &(skb->data[14+ip_hdr->ihl * 4]); -+ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4; -+ data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len; -+ -+ prv_index = first_desc_index-1; -+ if (prv_index <0) -+ prv_index += TX_DESC_NUM; -+ seq_num = ntohl(tcp_hdr->seq); -+ -+ if (snd_pages) -+ { -+ // calculate header length -+ // check fragment total length and header len = skb len - frag len -+ // or parse the header. -+ for (i=0; ifrags[i]; -+ header_len -= frag->size; -+ } -+ ownership = CPU; -+ freeable = 0; -+ /* fill header into first descriptor */ -+ fill_in_desc(dev_index, fill_desc, skb->data, header_len, len, 2, freeable, ownership, 0); -+ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); -+ tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len; -+ -+ eof = 0; -+ ownership = DMA; -+ for (i=0; ifrags[i]; -+ int start_pos = frag->page_offset; -+ char* data_buf = page_address(frag->page); -+ int data_size = frag->size; -+ int cur_index; -+ -+ if (i == snd_pages-1) -+ { -+ eof=1; -+ freeable = 1; -+ } -+ fill_in_desc(dev_index, fill_desc, data_buf+(start_pos), data_size, -+ len, eof, freeable, ownership, skb); -+ cur_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ -+ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); -+ } -+ /* pass the ownership of the first descriptor to hardware */ -+// disable_irq(gmac_irq[dev_index]); -+ tx_skb[dev_index][first_desc_index].desc_in_use = 1; -+ wmb(); -+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA; -+// consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE); -+ tp->tx_cur_desc = fill_desc; -+ dev->trans_start = jiffies; -+// enable_irq(gmac_irq[dev_index]); -+ } -+ else if ( tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU ) -+ { -+// tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len; -+// disable_irq(gmac_irq[dev_index]); -+ fill_in_desc(dev_index, tp->tx_cur_desc, skb->data, skb->len, skb->len, 3, 1, DMA, skb); -+// enable_irq(gmac_irq[dev_index]); -+ //consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE); -+ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); -+ dev->trans_start = jiffies; -+ } -+ else -+ { -+ printk("gmac tx drop!\n"); -+ tp->stats.tx_dropped++; -+ return -1; -+ } -+ -+#ifdef CONFIG_TXINT_DISABLE -+ tp->tx_desc_hdr[dev_index] = (tp->tx_desc_hdr[dev_index] + desc_needed) & (TX_DESC_NUM-1); -+#endif -+ -+#else -+ if ((tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU) && (len < TX_BUF_SIZE)) -+ { -+ index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); -+ tx_skb[dev_index][index] = skb; -+ consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE); -+ tp->tx_cur_desc->buf_adr = (unsigned int)__pa(skb->data); -+ tp->tx_cur_desc->flag_status.bits_tx_flag.frame_count = len; /* total frame byte count */ -+ tp->tx_cur_desc->next_desc.bits.sof_eof = 0x03; /*only one descriptor*/ -+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.buffer_size = len; /* descriptor byte count */ -+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.vlan_enable = 0; -+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ip_csum_en = 0; /* TSS IPv4 IP header checksum enable */ -+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 0 ; /* TSS IPv6 tx enable */ -+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.tcp_csum_en = 0; /* TSS TCP checksum enable */ -+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.udp_csum_en = 0; /* TSS UDP checksum enable */ -+ wmb(); -+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA; /* set owner bit */ -+ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); -+ dev->trans_start = jiffies; -+ } -+ else -+ { -+ /* no free tx descriptor */ -+ dev_kfree_skb(skb); -+ netif_stop_queue(dev); -+ tp->stats.tx_dropped++; -+ return (-1); -+ } -+#endif -+ /* if TX DMA process is stoped , restart it */ -+ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC); -+ if (txdma_busy.bits.td_busy == 0) -+ { -+ /* restart DMA process */ -+ tx_ctrl.bits32 = 0; -+ tx_ctrl.bits.td_start = 1; -+ tx_ctrl.bits.td_continue = 1; -+ tx_ctrl_mask.bits32 = 0; -+ tx_ctrl_mask.bits.td_start = 1; -+ tx_ctrl_mask.bits.td_continue = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32); -+ } -+ return (0); -+} -+ -+ -+struct net_device_stats * gmac_get_stats(struct net_device *dev) -+{ -+ struct gmac_private *tp = dev->priv; -+ unsigned long flags; -+ unsigned int pkt_drop; -+ unsigned int pkt_error; -+ unsigned int dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+ -+// if (storlink_ctl.recvfile==3) -+// { -+// printk("GMAC_GLOBAL_BASE_ADDR=%x\n", readl(GMAC_GLOBAL_BASE_ADDR+0x30)); -+// gmac_dump_register(dev); -+// printk_all(0, dev); -+// } -+ -+ if (netif_running(dev)) -+ { -+ /* read H/W counter */ -+ spin_lock_irqsave(&tp->lock,flags); -+ pkt_drop = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS); -+ pkt_error = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS); -+ tp->stats.rx_dropped = tp->stats.rx_dropped + pkt_drop; -+ tp->stats.rx_errors = tp->stats.rx_errors + pkt_error; -+ spin_unlock_irqrestore(&tp->lock,flags); -+ } -+ return &tp->stats; -+} -+ -+static unsigned const ethernet_polynomial = 0x04c11db7U; -+static inline u32 ether_crc (int length, unsigned char *data) -+{ -+ int crc = -1; -+ unsigned int i; -+ unsigned int crc_val=0; -+ -+ while (--length >= 0) { -+ unsigned char current_octet = *data++; -+ int bit; -+ for (bit = 0; bit < 8; bit++, current_octet >>= 1) -+ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ? -+ ethernet_polynomial : 0); -+ } -+ crc = ~crc; -+ for (i=0;i<32;i++) -+ { -+ crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i)); -+ } -+ return crc_val; -+} -+ -+static void gmac_set_rx_mode(struct net_device *dev) -+{ -+ GMAC_RX_FLTR_T filter; -+ unsigned int mc_filter[2]; /* Multicast hash filter */ -+ int bit_nr; -+ unsigned int i, dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+ -+// printk("%s : dev->flags = %x \n",__func__,dev->flags); -+// dev->flags |= IFF_ALLMULTI; /* temp */ -+ filter.bits32 = 0; -+ filter.bits.error = 0; -+ if (dev->flags & IFF_PROMISC) -+ { -+ filter.bits.error = 1; -+ filter.bits.promiscuous = 1; -+ filter.bits.broadcast = 1; -+ filter.bits.multicast = 1; -+ filter.bits.unicast = 1; -+ mc_filter[1] = mc_filter[0] = 0xffffffff; -+ } -+ else if (dev->flags & IFF_ALLMULTI) -+ { -+ filter.bits.promiscuous = 1; -+ filter.bits.broadcast = 1; -+ filter.bits.multicast = 1; -+ filter.bits.unicast = 1; -+ mc_filter[1] = mc_filter[0] = 0xffffffff; -+ } -+ else -+ { -+ struct dev_mc_list *mclist; -+ -+ filter.bits.promiscuous = 1; -+ filter.bits.broadcast = 1; -+ filter.bits.multicast = 1; -+ filter.bits.unicast = 1; -+ mc_filter[1] = mc_filter[0] = 0; -+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next) -+ { -+ bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f; -+ if (bit_nr < 32) -+ { -+ mc_filter[0] = mc_filter[0] | (1<dev_addr[i] = sock->sa_data[i]; -+ } -+ -+ reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24); -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD0,reg_val,0xffffffff); -+ reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8) ; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD1,reg_val,0x0000ffff); -+ memcpy(ð0_mac[0],&dev->dev_addr[0],6); -+ printk("Storlink %s address = ",dev->name); -+ printk("%02x",dev->dev_addr[0]); -+ printk("%02x",dev->dev_addr[1]); -+ printk("%02x",dev->dev_addr[2]); -+ printk("%02x",dev->dev_addr[3]); -+ printk("%02x",dev->dev_addr[4]); -+ printk("%02x\n",dev->dev_addr[5]); -+ -+ return (0); -+} -+ -+static void gmac_tx_timeout(struct net_device *dev) -+{ -+ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask; -+ GMAC_TXDMA_FIRST_DESC_T txdma_busy; -+ int dev_index; -+ -+ dev_index = gmac_select_interface(dev); -+ -+ /* if TX DMA process is stoped , restart it */ -+ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC); -+ if (txdma_busy.bits.td_busy == 0) -+ { -+ /* restart DMA process */ -+ tx_ctrl.bits32 = 0; -+ tx_ctrl.bits.td_start = 1; -+ tx_ctrl.bits.td_continue = 1; -+ tx_ctrl_mask.bits32 = 0; -+ tx_ctrl_mask.bits.td_start = 1; -+ tx_ctrl_mask.bits.td_continue = 1; -+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32); -+ } -+ netif_wake_queue(dev); -+ return; -+} -+ -+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -+{ -+ int rc = 0; -+ unsigned char *hwa = rq->ifr_ifru.ifru_hwaddr.sa_data; -+ -+ if (!netif_running(dev)) -+ { -+ printk("Before changing the H/W address,please down the device.\n"); -+ return -EINVAL; -+ } -+ -+ switch (cmd) { -+ case SIOCETHTOOL: -+ break; -+ -+ case SIOCSIFHWADDR: -+ gmac_set_mac_address(dev,hwa); -+ break; -+ -+ case SIOCGMIIPHY: /* Get the address of the PHY in use. */ -+ case SIOCDEVPRIVATE: /* binary compat, remove in 2.5 */ -+ break; -+ -+ case SIOCGMIIREG: /* Read the specified MII register. */ -+ case SIOCDEVPRIVATE+1: -+ break; -+ -+ case SIOCSMIIREG: /* Write the specified MII register */ -+ case SIOCDEVPRIVATE+2: -+ break; -+ -+ default: -+ rc = -EOPNOTSUPP; -+ break; -+ } -+ -+ return rc; -+} -+ -+static void gmac_cleanup_module(void) -+{ -+ int i; -+ -+ for (i=0;ipriv; -+ -+ dev[i]->base_addr = gmac_base_addr[i]; -+ dev[i]->irq = gmac_irq[i]; -+ dev[i]->open = gmac_open; -+ dev[i]->stop = gmac_close; -+ dev[i]->hard_start_xmit = gmac_start_xmit; -+ dev[i]->get_stats = gmac_get_stats; -+ dev[i]->set_multicast_list = gmac_set_rx_mode; -+ dev[i]->set_mac_address = gmac_set_mac_address; -+ dev[i]->do_ioctl = gmac_netdev_ioctl; -+ dev[i]->tx_timeout = gmac_tx_timeout; -+ dev[i]->watchdog_timeo = TX_TIMEOUT; -+ dev[i]->features |= NETIF_F_SG|NETIF_F_HW_CSUM|NETIF_F_TSO; -+#ifdef CONFIG_SL_NAPI -+ printk("NAPI driver is enabled.\n"); -+ if (i==0) -+ { -+ dev[i]->poll = gmac_rx_poll_ga; -+ dev[i]->weight = 64; -+ } -+ else -+ { -+ dev[i]->poll = gmac_rx_poll_gb; -+ dev[i]->weight = 64; -+ } -+#endif -+ -+ if (register_netdev(dev[i])) -+ { -+ gmac_cleanup_module(); -+ return(-1); -+ } -+ } -+ -+#ifdef CONFIG_SL3516_ASIC -+{ -+ unsigned int val; -+ -+ /* set GMAC global register */ -+ val = readl(GMAC_GLOBAL_BASE_ADDR+0x10); -+ val = val | 0x005a0000; -+ writel(val,GMAC_GLOBAL_BASE_ADDR+0x10); -+ writel(0x07f007f0,GMAC_GLOBAL_BASE_ADDR+0x1c); -+ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x20); -+ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x24); -+ val = readl(GMAC_GLOBAL_BASE_ADDR+0x04); -+ if((val&(1<<20))==0){ // GMAC1 enable -+ val = readl(GMAC_GLOBAL_BASE_ADDR+0x30); -+ val = (val & 0xe7ffffff) | 0x08000000; -+ writel(val,GMAC_GLOBAL_BASE_ADDR+0x30); -+ } -+ -+} -+#endif -+ -+// printk("%s: dev0=%x dev1=%x \n",__func__,dev[0],dev[1]); -+// FLAG_SWITCH = 0 ; -+// FLAG_SWITCH = SPI_get_identifier(); -+// if(FLAG_SWITCH) -+// { -+// printk("Configure ADM699X...\n"); -+// SPI_default(); //Add by jason for ADM699X configuration -+// } -+ return (0); -+} -+ -+ -+module_init(gmac_init_module); -+module_exit(gmac_cleanup_module); -+ -+static int gmac_phy_thread (void *data) -+{ -+ struct net_device *dev = data; -+ struct gmac_private *tp = dev->priv; -+ unsigned long timeout; -+ -+ daemonize("%s", dev->name); -+ allow_signal(SIGTERM); -+// reparent_to_init(); -+// spin_lock_irq(¤t->sigmask_lock); -+// sigemptyset(¤t->blocked); -+// recalc_sigpending(current); -+// spin_unlock_irq(¤t->sigmask_lock); -+// strncpy (current->comm, dev->name, sizeof(current->comm) - 1); -+// current->comm[sizeof(current->comm) - 1] = '\0'; -+ -+ while (1) -+ { -+ timeout = next_tick; -+ do -+ { -+ timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout); -+ } while (!signal_pending (current) && (timeout > 0)); -+ -+ if (signal_pending (current)) -+ { -+// spin_lock_irq(¤t->sigmask_lock); -+ flush_signals(current); -+// spin_unlock_irq(¤t->sigmask_lock); -+ } -+ -+ if (tp->time_to_die) -+ break; -+ -+// printk("%s : Polling PHY Status...%x\n",__func__,dev); -+ rtnl_lock (); -+ gmac_get_phy_status(dev); -+ rtnl_unlock (); -+ } -+ complete_and_exit (&tp->thr_exited, 0); -+} -+ -+static void gmac_set_phy_status(struct net_device *dev) -+{ -+ GMAC_STATUS_T status; -+ unsigned int reg_val; -+ unsigned int i = 0; -+ unsigned int index; -+ -+ if (FLAG_SWITCH==1) -+ { -+ return; /* GMAC connects to a switch chip, not PHY */ -+ } -+ -+ index = gmac_get_dev_index(dev); -+ -+ if (index == 0) -+ { -+// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */ -+// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */ -+ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ -+// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */ -+#ifdef CONFIG_SL3516_ASIC -+ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */ -+// mii_write(phy_addr[index],0x09,0x0000); /* advertisement 1000M full duplex, pause capable on */ -+#endif -+ } -+ else -+ { -+// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */ -+// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */ -+ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ -+// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */ -+#ifdef CONFIG_SL3516_ASIC -+// mii_write(phy_addr[index],0x09,0x0000); /* advertisement no 1000M */ -+ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */ -+#endif -+ } -+ -+ mii_write(phy_addr[index],0x00,0x1200); /* Enable and Restart Auto-Negotiation */ -+ mii_write(phy_addr[index],0x18,0x0041); /* Enable Active led */ -+ while (((reg_val=mii_read(phy_addr[index],0x01)) & 0x00000004)!=0x04) -+ { -+ i++; -+ if (i > 30) -+ { -+ break; -+ } -+ msleep(100); -+ } -+ if (i>30) -+ { -+ pre_phy_status[index] = LINK_DOWN; -+ clear_bit(__LINK_STATE_START, &dev->state); -+ netif_stop_queue(dev); -+ storlink_ctl.link = 0; -+ printk("Link Down (%04x) ",reg_val); -+ } -+ else -+ { -+ pre_phy_status[index] = LINK_UP; -+ set_bit(__LINK_STATE_START, &dev->state); -+ netif_wake_queue(dev); -+ storlink_ctl.link = 1; -+ printk("Link Up (%04x) ",reg_val); -+ } -+ -+ status.bits32 = 0; -+ reg_val = mii_read(phy_addr[index],10); -+ printk("reg_val0 = %x \n",reg_val); -+ if ((reg_val & 0x0800) == 0x0800) -+ { -+ status.bits.duplex = 1; -+ status.bits.speed = 2; -+ printk(" 1000M/Full \n"); -+ } -+ else if ((reg_val & 0x0400) == 0x0400) -+ { -+ status.bits.duplex = 0; -+ status.bits.speed = 2; -+ printk(" 1000M/Half \n"); -+ } -+ else -+ { -+ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; -+ printk("reg_val1 = %x \n",reg_val); -+ if ((reg_val & 0x08)==0x08) /* 100M full duplex */ -+ { -+ status.bits.duplex = 1; -+ status.bits.speed = 1; -+ printk(" 100M/Full \n"); -+ } -+ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */ -+ { -+ status.bits.duplex = 0; -+ status.bits.speed = 1; -+ printk(" 100M/Half \n"); -+ } -+ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */ -+ { -+ status.bits.duplex = 1; -+ status.bits.speed = 0; -+ printk(" 10M/Full \n"); -+ } -+ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */ -+ { -+ status.bits.duplex = 0; -+ status.bits.speed = 0; -+ printk(" 100M/Half \n"); -+ } -+ } -+ -+ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; -+ if ((reg_val & 0x20)==0x20) -+ { -+ flow_control_enable[index] = 1; -+ printk("Flow Control Enable. \n"); -+ } -+ else -+ { -+ flow_control_enable[index] = 0; -+ printk("Flow Control Disable. \n"); -+ } -+ full_duplex = status.bits.duplex; -+ speed = status.bits.speed; -+} -+ -+static void gmac_get_phy_status(struct net_device *dev) -+{ -+ GMAC_CONFIG0_T config0,config0_mask; -+ GMAC_STATUS_T status; -+ unsigned int reg_val; -+ unsigned int index; -+ -+ index = gmac_select_interface(dev); -+ -+ status.bits32 = 0; -+ status.bits.phy_mode = 1; -+ -+#ifdef CONFIG_SL3516_ASIC -+ status.bits.mii_rmii = 2; /* default value for ASIC version */ -+// status.bits.speed = 1; -+#else -+ if (index==0) -+ status.bits.mii_rmii = 0; -+ else -+ status.bits.mii_rmii = 2; -+#endif -+ -+ /* read PHY status register */ -+ reg_val = mii_read(phy_addr[index],0x01); -+ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */ -+ { -+ /* read PHY Auto-Negotiation Link Partner Ability Register */ -+ reg_val = mii_read(phy_addr[index],10); -+ if ((reg_val & 0x0800) == 0x0800) -+ { -+ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */ -+ status.bits.duplex = 1; -+ status.bits.speed = 2; -+ } -+ else if ((reg_val & 0x0400) == 0x0400) -+ { -+ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */ -+ status.bits.duplex = 0; -+ status.bits.speed = 2; -+ } -+ else -+ { -+ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; -+ if ((reg_val & 0x08)==0x08) /* 100M full duplex */ -+ { -+ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ -+ status.bits.duplex = 1; -+ status.bits.speed = 1; -+ } -+ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */ -+ { -+ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ -+ status.bits.duplex = 0; -+ status.bits.speed = 1; -+ } -+ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */ -+ { -+ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ -+ status.bits.duplex = 1; -+ status.bits.speed = 0; -+ } -+ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */ -+ { -+ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ -+ status.bits.duplex = 0; -+ status.bits.speed = 0; -+ } -+ } -+ status.bits.link = LINK_UP; /* link up */ -+ netif_wake_queue(dev); -+ -+ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; -+ if ((reg_val & 0x20)==0x20) -+ { -+ if (flow_control_enable[index] == 0) -+ { -+ config0.bits32 = 0; -+ config0_mask.bits32 = 0; -+ config0.bits.tx_fc_en = 1; /* enable tx flow control */ -+ config0.bits.rx_fc_en = 1; /* enable rx flow control */ -+ config0_mask.bits.tx_fc_en = 1; -+ config0_mask.bits.rx_fc_en = 1; -+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); -+// printk("eth%d Flow Control Enable. \n",index); -+ } -+ flow_control_enable[index] = 1; -+ } -+ else -+ { -+ if (flow_control_enable[index] == 1) -+ { -+ config0.bits32 = 0; -+ config0_mask.bits32 = 0; -+ config0.bits.tx_fc_en = 0; /* disable tx flow control */ -+ config0.bits.rx_fc_en = 0; /* disable rx flow control */ -+ config0_mask.bits.tx_fc_en = 1; -+ config0_mask.bits.rx_fc_en = 1; -+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); -+// printk("eth%d Flow Control Disable. \n",index); -+ } -+ flow_control_enable[index] = 0; -+ } -+ -+ if (pre_phy_status[index] == LINK_DOWN) -+ { -+ gmac_enable_tx_rx(dev); -+ pre_phy_status[index] = LINK_UP; -+ set_bit(__LINK_STATE_START, &dev->state); -+ storlink_ctl.link = 1; -+// printk("eth%d Link Up ...\n",index); -+ } -+ } -+ else -+ { -+ status.bits.link = LINK_DOWN; /* link down */ -+ netif_stop_queue(dev); -+ flow_control_enable[index] = 0; -+ storlink_ctl.link = 0; -+ if (pre_phy_status[index] == LINK_UP) -+ { -+ gmac_disable_tx_rx(dev); -+ pre_phy_status[index] = LINK_DOWN; -+ clear_bit(__LINK_STATE_START, &dev->state); -+// printk("eth%d Link Down ...\n",index); -+ } -+ -+ } -+ -+ reg_val = gmac_read_reg(gmac_base_addr[index] + GMAC_STATUS); -+ if (reg_val != status.bits32) -+ { -+ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status.bits32,0x0000007f); -+ } -+} -+ -+/***************************************/ -+/* define GPIO module base address */ -+/***************************************/ -+#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) -+ -+/* define GPIO pin for MDC/MDIO */ -+ -+// for gemini ASIC -+#ifdef CONFIG_SL3516_ASIC -+#define H_MDC_PIN 22 -+#define H_MDIO_PIN 21 -+#define G_MDC_PIN 22 -+#define G_MDIO_PIN 21 -+#else -+#define H_MDC_PIN 3 -+#define H_MDIO_PIN 2 -+#define G_MDC_PIN 0 -+#define G_MDIO_PIN 1 -+#endif -+ -+//#define GPIO_MDC 0x80000000 -+//#define GPIO_MDIO 0x00400000 -+ -+static unsigned int GPIO_MDC = 0; -+static unsigned int GPIO_MDIO = 0; -+static unsigned int GPIO_MDC_PIN = 0; -+static unsigned int GPIO_MDIO_PIN = 0; -+ -+// For PHY test definition!! -+#define LPC_EECK 0x02 -+#define LPC_EDIO 0x04 -+#define LPC_GPIO_SET 3 -+#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE) -+#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x) -+#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x) -+ -+enum GPIO_REG -+{ -+ GPIO_DATA_OUT = 0x00, -+ GPIO_DATA_IN = 0x04, -+ GPIO_PIN_DIR = 0x08, -+ GPIO_BY_PASS = 0x0c, -+ GPIO_DATA_SET = 0x10, -+ GPIO_DATA_CLEAR = 0x14, -+}; -+/***********************/ -+/* MDC : GPIO[31] */ -+/* MDIO: GPIO[22] */ -+/***********************/ -+ -+/*************************************************** -+* All the commands should have the frame structure: -+*

-+****************************************************/
-+
-+/*****************************************************************
-+* Inject a bit to NWay register through CSR9_MDC,MDIO
-+*******************************************************************/
-+void mii_serial_write(char bit_MDO) // write data into mii PHY
-+{
-+#if 0 //def CONFIG_SL2312_LPC_IT8712
-+	unsigned char iomode,status;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode |= (LPC_EECK|LPC_EDIO) ;				// Set EECK,EDIO,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	if(bit_MDO)
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status |= LPC_EDIO ;		//EDIO high
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+	else
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status &= ~(LPC_EDIO) ;		//EDIO low
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+
-+	status |= LPC_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(LPC_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+    unsigned int addr;
-+    unsigned int value;
-+
-+    addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
-+    value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
-+    writel(value,addr);
-+    if(bit_MDO)
-+    {
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDIO,addr); /* set MDIO to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDC,addr); /* set MDC to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDC,addr); /* set MDC to 0 */
-+    }
-+    else
-+    {
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDIO,addr); /* set MDIO to 0 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDC,addr); /* set MDC to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDC,addr); /* set MDC to 0 */
-+    }
-+
-+#endif
-+}
-+
-+/**********************************************************************
-+* read a bit from NWay register through CSR9_MDC,MDIO
-+***********************************************************************/
-+unsigned int mii_serial_read(void) // read data from mii PHY
-+{
-+#if 0 //def CONFIG_SL2312_LPC_IT8712
-+  	unsigned char iomode,status;
-+	unsigned int value ;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode &= ~(LPC_EDIO) ;		// Set EDIO input
-+	iomode |= (LPC_EECK) ;		// Set EECK,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	status = inb_gpio( LPC_GPIO_SET);
-+	status |= LPC_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(LPC_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	value = inb_gpio( LPC_GPIO_SET);
-+
-+	value = value>>2 ;
-+	value &= 0x01;
-+
-+	return value ;
-+
-+#else
-+    unsigned int *addr;
-+    unsigned int value;
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+    value = readl(addr) & ~GPIO_MDIO; //0xffbfffff;   /* set MDC to output and MDIO to input */
-+    writel(value,addr);
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
-+    writel(GPIO_MDC,addr); /* set MDC to 1 */
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+    writel(GPIO_MDC,addr); /* set MDC to 0 */
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
-+    value = readl(addr);
-+    value = (value & (1<> GPIO_MDIO_PIN;
-+    return(value);
-+
-+#endif
-+}
-+
-+/***************************************
-+* preamble + ST
-+***************************************/
-+void mii_pre_st(void)
-+{
-+    unsigned char i;
-+
-+    for(i=0;i<32;i++) // PREAMBLE
-+        mii_serial_write(1);
-+    mii_serial_write(0); // ST
-+    mii_serial_write(1);
-+}
-+
-+
-+/******************************************
-+* Read MII register
-+* phyad -> physical address
-+* regad -> register address
-+***************************************** */
-+unsigned int mii_read(unsigned char phyad,unsigned char regad)
-+{
-+    unsigned int i,value;
-+    unsigned int bit;
-+
-+    if (phyad == GPHY_ADDR)
-+    {
-+        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
-+        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+    }
-+    else
-+    {
-+        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
-+        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+    }
-+    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    for (i=0;i<5;i++) { // REGAD
-+        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    mii_serial_read(); // TA_Z
-+//    if((bit=mii_serial_read()) !=0 ) // TA_0
-+//    {
-+//        return(0);
-+//    }
-+    value=0;
-+    for (i=0;i<16;i++) { // READ DATA
-+        bit=mii_serial_read();
-+        value += (bit<<(15-i)) ;
-+    }
-+
-+    mii_serial_write(0); // dumy clock
-+    mii_serial_write(0); // dumy clock
-+//printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
-+    return(value);
-+}
-+
-+/******************************************
-+* Write MII register
-+* phyad -> physical address
-+* regad -> register address
-+* value -> value to be write
-+***************************************** */
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
-+{
-+    unsigned int i;
-+    char bit;
-+
-+printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
-+    if (phyad == GPHY_ADDR)
-+    {
-+        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
-+        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+    }
-+    else
-+    {
-+        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
-+        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+    }
-+    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    for (i=0;i<5;i++) { // REGAD
-+        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+    mii_serial_write(1); // TA_1
-+    mii_serial_write(0); // TA_0
-+
-+    for (i=0;i<16;i++) { // OUT DATA
-+        bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
-+        mii_serial_write(bit);
-+    }
-+    mii_serial_write(0); // dumy clock
-+    mii_serial_write(0); // dumy clock
-+}
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+/*				NOTES
-+ *   The instruction set of the 93C66/56/46/26/06 chips are as follows:
-+ *
-+ *               Start  OP	    *
-+ *     Function   Bit  Code  Address**  Data     Description
-+ *     -------------------------------------------------------------------
-+ *     READ        1    10   A7 - A0             Reads data stored in memory,
-+ *                                               starting at specified address
-+ *     EWEN        1    00   11XXXXXX            Write enable must precede
-+ *                                               all programming modes
-+ *     ERASE       1    11   A7 - A0             Erase register A7A6A5A4A3A2A1A0
-+ *     WRITE       1    01   A7 - A0   D15 - D0  Writes register
-+ *     ERAL        1    00   10XXXXXX            Erase all registers
-+ *     WRAL        1    00   01XXXXXX  D15 - D0  Writes to all registers
-+ *     EWDS        1    00   00XXXXXX            Disables all programming
-+ *                                               instructions
-+ *    *Note: A value of X for address is a don't care condition.
-+ *    **Note: There are 8 address bits for the 93C56/66 chips unlike
-+ *	      the 93C46/26/06 chips which have 6 address bits.
-+ *
-+ *   The 93Cx6 has a four wire interface: clock, chip select, data in, and
-+ *   data out.While the ADM6996 uning three interface: clock, chip select,and data line.
-+ *   The input and output are the same pin. ADM6996 can only recognize the write cmd.
-+ *   In order to perform above functions, you need
-+ *   1. to enable the chip select .
-+ *   2. send one clock of dummy clock
-+ *   3. send start bit and opcode
-+ *   4. send 8 bits address and 16 bits data
-+ *   5. to disable the chip select.
-+ *							Jason Lee 2003/07/30
-+ */
-+
-+/***************************************/
-+/* define GPIO module base address     */
-+/***************************************/
-+#define GPIO_EECS	     0x00400000		/*   EECS: GPIO[22]   */
-+//#define GPIO_MOSI	     0x20000000         /*   EEDO: GPIO[29]   send to 6996*/
-+#define GPIO_MISO	     0x40000000         /*   EEDI: GPIO[30]   receive from 6996*/
-+#define GPIO_EECK	     0x80000000         /*   EECK: GPIO[31]   */
-+
-+#define ADM_EECS		0x01
-+#define ADM_EECK		0x02
-+#define ADM_EDIO		0x04
-+/*************************************************************
-+* SPI protocol for ADM6996 control
-+**************************************************************/
-+#define SPI_OP_LEN	     0x03		// the length of start bit and opcode
-+#define SPI_OPWRITE	     0X05		// write
-+#define SPI_OPREAD	     0X06		// read
-+#define SPI_OPERASE	     0X07		// erase
-+#define SPI_OPWTEN	     0X04		// write enable
-+#define SPI_OPWTDIS	     0X04		// write disable
-+#define SPI_OPERSALL	     0X04		// erase all
-+#define SPI_OPWTALL	     0X04		// write all
-+
-+#define SPI_ADD_LEN	     8			// bits of Address
-+#define SPI_DAT_LEN	     16			// bits of Data
-+#define ADM6996_PORT_NO	     6			// the port number of ADM6996
-+#define ADM6999_PORT_NO	     9			// the port number of ADM6999
-+#ifdef CONFIG_ADM_6996
-+	#define ADM699X_PORT_NO		ADM6996_PORT_NO
-+#endif
-+#ifdef CONFIG_ADM_6999
-+	#define ADM699X_PORT_NO		ADM6999_PORT_NO
-+#endif
-+#define LPC_GPIO_SET		3
-+#define LPC_BASE_ADDR			IO_ADDRESS(IT8712_IO_BASE)
-+
-+extern int it8712_exist;
-+
-+#define inb_gpio(x)			inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+#define outb_gpio(x, y)		outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+
-+/****************************************/
-+/*	Function Declare		*/
-+/****************************************/
-+/*
-+void SPI_write(unsigned char addr,unsigned int value);
-+unsigned int SPI_read(unsigned char table,unsigned char addr);
-+void SPI_write_bit(char bit_EEDO);
-+unsigned int SPI_read_bit(void);
-+void SPI_default(void);
-+void SPI_reset(unsigned char rstype,unsigned char port_cnt);
-+void SPI_pre_st(void);
-+void SPI_CS_enable(unsigned char enable);
-+void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask);
-+void SPI_Set_tag(unsigned int port,unsigned tag);
-+void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask);
-+void SPI_mac_lock(unsigned int port, unsigned char lock);
-+void SPI_get_port_state(unsigned int port);
-+void SPI_port_enable(unsigned int port,unsigned char enable);
-+
-+void SPI_get_status(unsigned int port);
-+*/
-+
-+struct PORT_CONFIG
-+{
-+	unsigned char auto_negotiation;	// 0:Disable	1:Enable
-+	unsigned char speed;		// 0:10M	1:100M
-+	unsigned char duplex;		// 0:Half	1:Full duplex
-+	unsigned char Tag;		// 0:Untag	1:Tag
-+	unsigned char port_disable;	// 0:port enable	1:disable
-+	unsigned char pvid;		// port VLAN ID 0001
-+	unsigned char mdix;		// Crossover judgement. 0:Disable 1:Enable
-+	unsigned char mac_lock;		// MAC address Lock 0:Disable 1:Enable
-+};
-+
-+struct PORT_STATUS
-+{
-+	unsigned char link;		// 0:not link	1:link established
-+	unsigned char speed;		// 0:10M	1:100M
-+	unsigned char duplex;		// 0:Half	1:Full duplex
-+	unsigned char flow_ctl;		// 0:flow control disable 1:enable
-+	unsigned char mac_lock;		// MAC address Lock 0:Disable 1:Enable
-+	unsigned char port_disable;	// 0:port enable	1:disable
-+
-+	// Serial Management
-+	unsigned long rx_pac_count;		//receive packet count
-+	unsigned long rx_pac_byte;		//receive packet byte count
-+	unsigned long tx_pac_count;		//transmit packet count
-+	unsigned long tx_pac_byte;		//transmit packet byte count
-+	unsigned long collision_count;		//error count
-+	unsigned long error_count ;
-+
-+	unsigned long rx_pac_count_overflow;		//overflow flag
-+	unsigned long rx_pac_byte_overflow;
-+	unsigned long tx_pac_count_overflow;
-+	unsigned long tx_pac_byte_overflow;
-+	unsigned long collision_count_overflow;
-+	unsigned long error_count_overflow;
-+};
-+
-+struct PORT_CONFIG port_config[ADM699X_PORT_NO];	// 0~3:LAN , 4:WAN , 5:MII
-+static struct PORT_STATUS port_state[ADM699X_PORT_NO];
-+
-+/******************************************
-+* SPI_write
-+* addr -> Write Address
-+* value -> value to be write
-+***************************************** */
-+void SPI_write(unsigned char addr,unsigned int value)
-+{
-+	int     i;
-+	char    bit;
-+#ifdef CONFIG_IT8712_GPIO
-+	char    status;
-+#else
-+    int     ad1;
-+#endif
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+	SPI_CS_enable(1);
-+
-+	SPI_write_bit(0);       //dummy clock
-+
-+	//send write command (0x05)
-+	for(i=SPI_OP_LEN-1;i>=0;i--)
-+	{
-+		bit = (SPI_OPWRITE>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+	// send 8 bits address (MSB first, LSB last)
-+	for(i=SPI_ADD_LEN-1;i>=0;i--)
-+	{
-+		bit = (addr>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+	// send 16 bits data (MSB first, LSB last)
-+	for(i=SPI_DAT_LEN-1;i>=0;i--)
-+	{
-+		bit = (value>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	SPI_CS_enable(0);	// CS low
-+
-+	for(i=0;i<0xFFF;i++) ;
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+}
-+
-+
-+/************************************
-+* SPI_write_bit
-+* bit_EEDO -> 1 or 0 to be written
-+************************************/
-+void SPI_write_bit(char bit_EEDO)
-+{
-+#ifdef CONFIG_IT8712_GPIO
-+	unsigned char iomode,status;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ;				// Set EECK,EDIO,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	if(bit_EEDO)
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status |= ADM_EDIO ;		//EDIO high
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+	else
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status &= ~(ADM_EDIO) ;		//EDIO low
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+
-+	status |= ADM_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(ADM_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+	unsigned int addr;
-+	unsigned int value;
-+
-+	addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+	value = readl(addr) |GPIO_EECK |GPIO_MISO ;   /* set EECK/MISO Pin to output */
-+	writel(value,addr);
-+	if(bit_EEDO)
-+	{
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+		writel(GPIO_MISO,addr); /* set MISO to 1 */
-+		writel(GPIO_EECK,addr); /* set EECK to 1 */
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_EECK,addr); /* set EECK to 0 */
-+	}
-+	else
-+	{
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_MISO,addr); /* set MISO to 0 */
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+		writel(GPIO_EECK,addr); /* set EECK to 1 */
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_EECK,addr); /* set EECK to 0 */
-+	}
-+
-+	return ;
-+#endif
-+}
-+
-+/**********************************************************************
-+* read a bit from ADM6996 register
-+***********************************************************************/
-+unsigned int SPI_read_bit(void) // read data from
-+{
-+#ifdef CONFIG_IT8712_GPIO
-+	unsigned char iomode,status;
-+	unsigned int value ;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode &= ~(ADM_EDIO) ;		// Set EDIO input
-+	iomode |= (ADM_EECS|ADM_EECK) ;		// Set EECK,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	status = inb_gpio( LPC_GPIO_SET);
-+	status |= ADM_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(ADM_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	value = inb_gpio( LPC_GPIO_SET);
-+
-+	value = value>>2 ;
-+	value &= 0x01;
-+
-+	return value ;
-+#else
-+	unsigned int addr;
-+	unsigned int value;
-+
-+	addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+	value = readl(addr) & (~GPIO_MISO);   // set EECK to output and MISO to input
-+	writel(value,addr);
-+
-+	addr =(GPIO_BASE_ADDR + GPIO_DATA_SET);
-+	writel(GPIO_EECK,addr); // set EECK to 1
-+	addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_EECK,addr); // set EECK to 0
-+
-+	addr = (GPIO_BASE_ADDR + GPIO_DATA_IN);
-+	value = readl(addr) ;
-+	value = value >> 30;
-+	return value ;
-+#endif
-+}
-+
-+/******************************************
-+* SPI_default
-+* EEPROM content default value
-+*******************************************/
-+void SPI_default(void)
-+{
-+	int i;
-+#ifdef CONFIG_ADM_6999
-+	SPI_write(0x11,0xFF30);
-+	for(i=1;i<8;i++)
-+		SPI_write(i,0x840F);
-+
-+	SPI_write(0x08,0x880F);			//port 8 Untag, PVID=2
-+	SPI_write(0x09,0x881D);			//port 9 Tag, PVID=2 ,10M
-+	SPI_write(0x14,0x017F);			//Group 0~6,8 as VLAN 1
-+	SPI_write(0x15,0x0180);			//Group 7,8 as VLAN 2
-+#endif
-+
-+#ifdef CONFIG_ADM_6996
-+	SPI_write(0x11,0xFF30);
-+	SPI_write(0x01,0x840F);			//port 0~3 Untag ,PVID=1 ,100M ,duplex
-+	SPI_write(0x03,0x840F);
-+	SPI_write(0x05,0x840F);
-+	SPI_write(0x07,0x840F);
-+	SPI_write(0x08,0x880F);			//port 4 Untag, PVID=2
-+	SPI_write(0x09,0x881D);			//port 5 Tag, PVID=2 ,10M
-+	SPI_write(0x14,0x0155);			//Group 0~3,5 as VLAN 1
-+	SPI_write(0x15,0x0180);			//Group 4,5 as VLAN 2
-+
-+#endif
-+
-+	for(i=0x16;i<=0x22;i++)
-+		SPI_write((unsigned char)i,0x0000);		// clean VLAN¡@map 3~15
-+
-+	for (i=0;i reset type
-+*	    0:reset all count for 'port_cnt' port
-+*	    1:reset specified count 'port_cnt'
-+* port_cnt   ->  port number or counter index
-+***************************************************/
-+void SPI_reset(unsigned char rstype,unsigned char port_cnt)
-+{
-+
-+	int i;
-+#ifdef CONFIG_IT8712_GPIO
-+    char status;
-+#else
-+	int ad1;
-+#endif
-+	char bit;
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+
-+	SPI_CS_enable(0);	// CS low
-+
-+	SPI_pre_st(); // PRE+ST
-+	SPI_write_bit(0); // OP
-+	SPI_write_bit(1);
-+
-+	SPI_write_bit(1);		// Table select, must be 1 -> reset Counter
-+
-+	SPI_write_bit(0);		// Device Address
-+	SPI_write_bit(0);
-+
-+	rstype &= 0x01;
-+	SPI_write_bit(rstype);		// Reset type 0:clear dedicate port's all counters 1:clear dedicate counter
-+
-+	for (i=5;i>=0;i--) 		// port or cnt index
-+	{
-+		bit = port_cnt >> i ;
-+		bit &= 0x01 ;
-+		SPI_write_bit(bit);
-+	}
-+
-+	SPI_write_bit(0); 		// dumy clock
-+	SPI_write_bit(0); 		// dumy clock
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+}
-+
-+/*****************************************************
-+* SPI_pre_st
-+* preambler: 32 bits '1'   start bit: '01'
-+*****************************************************/
-+void SPI_pre_st(void)
-+{
-+	int i;
-+
-+	for(i=0;i<32;i++) // PREAMBLE
-+		SPI_write_bit(1);
-+	SPI_write_bit(0); // ST
-+	SPI_write_bit(1);
-+}
-+
-+
-+/***********************************************************
-+* SPI_CS_enable
-+* before access ,you have to enable Chip Select. (pull high)
-+* When fisish, you should pull low !!
-+*************************************************************/
-+void SPI_CS_enable(unsigned char enable)
-+{
-+#ifdef CONFIG_IT8712_GPIO
-+
-+	unsigned char iomode,status;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ;				// Set EECK,EDIO,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+
-+	status = inb_gpio( LPC_GPIO_SET);
-+	if(enable)
-+		status |= ADM_EECS ;		//EECS high
-+	else
-+		status &= ~(ADM_EECS) ;	//EECS low
-+
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+
-+	status |= ADM_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(ADM_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+	unsigned int addr,value;
-+
-+	addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+	value = readl(addr) |GPIO_EECS |GPIO_EECK;   /* set EECS/EECK Pin to output */
-+	writel(value,addr);
-+
-+	if(enable)
-+	{
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+		writel(GPIO_EECS,addr); /* set EECS to 1 */
-+
-+	}
-+	else
-+	{
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_EECS,addr); /* set EECS to 0 */
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+		writel(GPIO_EECK,addr); /* set EECK to 1 */	// at least one clock after CS low
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_EECK,addr); /* set EECK to 0 */
-+	}
-+#endif
-+}
-+
-+/*********************************************************
-+* SPI_Set_VLAN: group ports as VLAN
-+* LAN  -> VLAN number : 0~16
-+* port_mask -> ports which would group as LAN
-+* 	       ex. 0x03 = 0000 0011
-+*			port 0 and port 1
-+*********************************************************/
-+void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask)
-+{
-+	unsigned int i,value=0;
-+	unsigned reg_add = 0x13 + LAN ;
-+
-+	for(i=0;i>= 1;
-+	}
-+
-+	SPI_write(reg_add,value);
-+}
-+
-+
-+/*******************************************
-+* SPI_Set_tag
-+* port -> port number to set tag or untag
-+* tag  -> 0/set untag,  1/set tag
-+* In general, tag is for MII port. LAN and
-+* WAN port is configed as untag!!
-+********************************************/
-+void SPI_Set_tag(unsigned int port,unsigned tag)
-+{
-+	unsigned int regadd,value;
-+
-+	// mapping port's register !! (0,1,2,3,4,5) ==> (1,3,5,7,8,9)
-+	if(port<=3)
-+		regadd=2*port+1;
-+	else if(port==4) regadd = 8 ;
-+	else regadd = 9 ;
-+
-+
-+	value = SPI_read(0,regadd);		//read original setting
-+
-+	if(tag)
-+		value |= 0x0010 ;		// set tag
-+	else
-+		value &= 0xFFEF ;		// set untag
-+
-+	SPI_write(regadd,value);		// write back!!
-+}
-+
-+/************************************************
-+* SPI_Set_PVID
-+* PVID -> PVID number :
-+* port_mask -> ports which would group as LAN
-+* 	       ex. 0x0F = 0000 1111 ==> port 0~3
-+************************************************/
-+void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask)
-+{
-+	unsigned int i,value=0;
-+
-+	PVID &= 0x000F ;
-+
-+	for(i=0;i>= 1;
-+	}
-+}
-+
-+
-+/************************************************
-+* SPI_get_PVID
-+* port -> which ports to VID
-+************************************************/
-+unsigned int SPI_Get_PVID(unsigned int port)
-+{
-+	unsigned int value=0;
-+
-+	if (port>=ADM6996_PORT_NO)
-+		return 0;
-+
-+	switch(port)
-+	{
-+		case 0:
-+			value = SPI_read(0,0x01);	// read original value
-+			value &= 0x3C00 ;		// get VID
-+			value = value >> 10 ;		// Shift
-+			break;
-+		case 1:
-+			value = SPI_read(0,0x03);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+		case 2:
-+			value = SPI_read(0,0x05);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+		case 3:
-+			value = SPI_read(0,0x07);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+		case 4:
-+			value = SPI_read(0,0x08);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+		case 5:
-+			value = SPI_read(0,0x09);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+	}
-+	return value ;
-+}
-+
-+
-+/**********************************************
-+* SPI_mac_clone
-+* port -> the port which will lock or unlock
-+* lock -> 0/the port will be unlock
-+*	  1/the port will be locked
-+**********************************************/
-+void SPI_mac_lock(unsigned int port, unsigned char lock)
-+{
-+	unsigned int i,value=0;
-+
-+	value = SPI_read(0,0x12);		// read original
-+
-+	for(i=0;i 0: if DA == pause then drop and stop mac learning
-+*	     1: if DA == pause ,then forward it
-+***************************************************/
-+void SPI_pause_cmd_forward(unsigned char forward)
-+{
-+	unsigned int value=0;
-+
-+	value = SPI_read(0,0x2C);		// read original setting
-+	if(forward)
-+		value |= 0x2000;		// set bit[13] '1'
-+	else
-+		value &= 0xDFFF;		// set bit[13] '0'
-+
-+	SPI_write(0x2C,value);
-+
-+}
-+
-+
-+/************************************************
-+* SPI_read
-+* table -> which table to be read: 1/count  0/EEPROM
-+* addr  -> Address to be read
-+* return : Value of the register
-+*************************************************/
-+unsigned int SPI_read(unsigned char table,unsigned char addr)
-+{
-+	int i ;
-+	unsigned int value=0;
-+	unsigned int bit;
-+#ifdef CONFIG_IT8712_GPIO
-+	unsigned char status;
-+#else
-+    unsigned int ad1;
-+#endif
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+
-+	SPI_CS_enable(0);
-+
-+	SPI_pre_st(); // PRE+ST
-+	SPI_write_bit(1); // OPCODE '10' for read
-+	SPI_write_bit(0);
-+
-+	(table==1) ? SPI_write_bit(1) : SPI_write_bit(0) ;	// table select
-+
-+	SPI_write_bit(0);		// Device Address
-+	SPI_write_bit(0);
-+
-+
-+	// send 7 bits address to be read
-+	for (i=6;i>=0;i--) {
-+		bit= ((addr>>i) & 0x01) ? 1 :0 ;
-+		SPI_write_bit(bit);
-+	}
-+
-+
-+	// turn around
-+	SPI_read_bit(); // TA_Z
-+
-+	value=0;
-+	for (i=31;i>=0;i--) { // READ DATA
-+		bit=SPI_read_bit();
-+		value |= bit << i ;
-+	}
-+
-+	SPI_read_bit(); // dumy clock
-+	SPI_read_bit(); // dumy clock
-+
-+	if(!table)					// EEPROM, only fetch 16 bits data
-+	{
-+	    if(addr&0x01)				// odd number content (register,register-1)
-+		    value >>= 16 ;			// so we remove the rear 16bits
-+	    else					// even number content (register+1,register),
-+		    value &= 0x0000FFFF ;		// so we keep the rear 16 bits
-+	}
-+
-+
-+	SPI_CS_enable(0);
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+
-+	return(value);
-+
-+}
-+
-+
-+
-+/**************************************************
-+* SPI_port_en
-+* port -> Number of port to config
-+* enable -> 1/ enable this port
-+*	    0/ disable this port
-+**************************************************/
-+void SPI_port_enable(unsigned int port,unsigned char enable)
-+{
-+	unsigned int reg_val ;
-+	unsigned char reg_add ;
-+
-+	if(port<=3)
-+		reg_add=2*port+1;
-+	else if(port==4) reg_add = 8 ;
-+	else reg_add = 9 ;
-+
-+	reg_val = SPI_read(0,reg_add);
-+	if(enable)
-+	{
-+		reg_val &= 0xFFDF ;
-+		SPI_write(reg_add,reg_val);
-+	}
-+	else
-+	{
-+		reg_val |= 0x0020 ;
-+		SPI_write(reg_add,reg_val);
-+	}
-+}
-+
-+/********************************************************
-+* get port status
-+* port -> specify the port number to get configuration
-+*********************************************************/
-+void SPI_get_status(unsigned int port)
-+{
-+/*	unsigned int reg_val,add_offset[6];
-+	struct PORT_STATUS *status;
-+	status = &port_state[port];
-+
-+	if(port>(ADM6996_PORT_NO-1))
-+		return ;
-+
-+	// Link estabilish , speed, deplex, flow control ?
-+	if(port < 5 )
-+	{
-+		reg_val = SPI_read(1, 1) ;
-+		if(port < 4)
-+			reg_val >>= port*8 ;
-+		else
-+			reg_val >>=28 ;
-+		status->link = reg_val & 0x00000001 ;
-+		status->speed = reg_val  & 0x00000002 ;
-+		status->duplex = reg_val & 0x00000004 ;
-+		status->flow_ctl = reg_val & 0x00000008 ;
-+	}
-+	else if(port ==5 )
-+	{
-+		reg_val = SPI_read(1, 2) ;
-+		status->link = reg_val & 0x00000001 ;
-+		status->speed = reg_val  & 0x00000002 ;
-+		status->duplex = reg_val & 0x00000008 ;
-+		status->flow_ctl = reg_val & 0x00000010 ;
-+	}
-+
-+	//   Mac Lock ?
-+	reg_val = SPI_read(0,0x12);
-+	switch(port)
-+	{
-+		case 0:	status->mac_lock = reg_val & 0x00000001;
-+		case 1:	status->mac_lock = reg_val & 0x00000004;
-+		case 2:	status->mac_lock = reg_val & 0x00000010;
-+		case 3:	status->mac_lock = reg_val & 0x00000040;
-+		case 4:	status->mac_lock = reg_val & 0x00000080;
-+		case 5:	status->mac_lock = reg_val & 0x00000100;
-+	}
-+
-+	// port enable ?
-+	add_offset[0] = 0x01 ;		add_offset[1] = 0x03 ;
-+	add_offset[2] = 0x05 ;		add_offset[3] = 0x07 ;
-+	add_offset[4] = 0x08 ;		add_offset[5] = 0x09 ;
-+	reg_val = SPI_read(0,add_offset[port]);
-+	status->port_disable = reg_val & 0x0020;
-+
-+
-+	//  Packet Count ...
-+	add_offset[0] = 0x04 ;		add_offset[1] = 0x06 ;
-+	add_offset[2] = 0x08 ;		add_offset[3] = 0x0a ;
-+	add_offset[4] = 0x0b ;		add_offset[5] = 0x0c ;
-+
-+	reg_val = SPI_read(1,add_offset[port]);
-+	status->rx_pac_count = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+9);
-+	status->rx_pac_byte = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+18);
-+	status->tx_pac_count = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+27);
-+	status->tx_pac_byte = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+36);
-+	status->collision_count = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+45);
-+	status->error_count = reg_val ;
-+	reg_val = SPI_read(1, 0x3A);
-+	switch(port)
-+	{
-+		case 0:	status->rx_pac_count_overflow = reg_val & 0x00000001;
-+			status->rx_pac_byte_overflow = reg_val & 0x00000200 ;
-+		case 1:	status->rx_pac_count_overflow = reg_val & 0x00000004;
-+			status->rx_pac_byte_overflow = reg_val & 0x00000800 ;
-+		case 2:	status->rx_pac_count_overflow = reg_val & 0x00000010;
-+			status->rx_pac_byte_overflow = reg_val & 0x00002000 ;
-+		case 3:	status->rx_pac_count_overflow = reg_val & 0x00000040;;
-+			status->rx_pac_byte_overflow = reg_val & 0x00008000 ;
-+		case 4:	status->rx_pac_count_overflow = reg_val & 0x00000080;
-+			status->rx_pac_byte_overflow = reg_val & 0x00010000 ;
-+		case 5:	status->rx_pac_count_overflow = reg_val & 0x00000100;
-+			status->rx_pac_byte_overflow = reg_val & 0x00020000 ;
-+	}
-+
-+	reg_val = SPI_read(1, 0x3B);
-+	switch(port)
-+	{
-+		case 0:	status->tx_pac_count_overflow = reg_val & 0x00000001;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00000200 ;
-+		case 1:	status->tx_pac_count_overflow  = reg_val & 0x00000004;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00000800 ;
-+		case 2:	status->tx_pac_count_overflow  = reg_val & 0x00000010;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00002000 ;
-+		case 3:	status->tx_pac_count_overflow  = reg_val & 0x00000040;;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00008000 ;
-+		case 4:	status->tx_pac_count_overflow  = reg_val & 0x00000080;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00010000 ;
-+		case 5:	status->tx_pac_count_overflow  = reg_val & 0x00000100;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00020000 ;
-+	}
-+*/
-+
-+	unsigned int reg_val;
-+	struct PORT_STATUS *status;
-+	status = &port_state[port];
-+
-+	if(port>=ADM6999_PORT_NO)
-+		return ;
-+
-+	// Link estabilish , speed, deplex, flow control ?
-+	if(port < ADM6999_PORT_NO-1 )
-+	{
-+		reg_val = SPI_read(1, 0x01) ;
-+		reg_val = reg_val >> port*4 ;
-+		status->link = reg_val & 0x00000001 ;
-+		status->speed = reg_val  & 0x00000002 ;
-+		status->duplex = reg_val & 0x00000004 ;
-+		status->flow_ctl = reg_val & 0x00000008 ;
-+	}
-+	else if(port == (ADM6999_PORT_NO-1) )
-+	{
-+		reg_val = SPI_read(1, 0x02) ;
-+		status->link = reg_val & 0x00000001 ;
-+		status->speed = reg_val  & 0x00000002 ;
-+		status->duplex = reg_val & 0x00000008 ;
-+		status->flow_ctl = reg_val & 0x00000010 ;
-+	}
-+
-+	// Mac Lock ?
-+	reg_val = SPI_read(0,0x12);
-+	reg_val = reg_val >> port ;
-+	reg_val = reg_val & 0x01 ;
-+	status->mac_lock = reg_val ? 0x01:0x00 ;
-+
-+	// port enable ?
-+	reg_val = SPI_read(0,(unsigned char)port+1);
-+	status->port_disable = reg_val & 0x0020;
-+
-+	//  Packet Count ...
-+	reg_val = SPI_read(1,(unsigned char)port+0x04);
-+	status->rx_pac_count = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x0D);
-+	status->rx_pac_byte = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x16);
-+	status->tx_pac_count = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x1F);
-+	status->tx_pac_byte = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x28);
-+	status->collision_count = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x31);
-+	status->error_count = reg_val ;
-+	reg_val = SPI_read(1, 0x3A);
-+	reg_val = reg_val >> port ;
-+	status->rx_pac_count_overflow = reg_val & 0x00000001;
-+	reg_val = reg_val >> 0x09 ;
-+	status->rx_pac_byte_overflow = reg_val & 0x00000001 ;
-+
-+	reg_val = SPI_read(1, 0x3B);
-+	reg_val = reg_val >> port ;
-+	status->tx_pac_count_overflow = reg_val & 0x00000001;
-+	reg_val = reg_val >> 0x09 ;
-+	status->tx_pac_byte_overflow  = reg_val & 0x00000001 ;
-+
-+	reg_val = SPI_read(1, 0x3C);
-+	reg_val = reg_val >> port ;
-+	status->collision_count_overflow = reg_val & 0x00000001;
-+	reg_val = reg_val >> 0x09 ;
-+	status->error_count_overflow  = reg_val & 0x00000001 ;
-+
-+}
-+
-+unsigned int SPI_get_identifier(void)
-+{
-+	unsigned int flag=0;
-+
-+#ifdef CONFIG_IT8712_GPIO
-+
-+	if (!it8712_exist) {
-+		return -ENODEV;
-+	}
-+	printk("it8712_gpio init\n");
-+
-+	/* initialize registers */
-+	// switch all multi-function pins to GPIO
-+	LPCSetConfig(LDN_GPIO, 0x28, 0xff);
-+
-+	// set simple I/O base address
-+	LPCSetConfig(LDN_GPIO, 0x62, IT8712_GPIO_BASE >> 8);
-+	LPCSetConfig(LDN_GPIO, 0x63, (unsigned char) IT8712_GPIO_BASE >> 8);
-+
-+	// select GPIO to simple I/O
-+	LPCSetConfig(LDN_GPIO, 0xc3, 0xff);
-+
-+	// enable internal pull-up
-+	LPCSetConfig(LDN_GPIO, 0xbb, 0xff);
-+
-+#endif
-+
-+	flag = SPI_read(1,0x00);
-+	printk("Get ADM identifier %6x\n",flag);
-+	if ((flag & 0xFFFF0) == 0x21120) {
-+		printk("ADM699X Found\n");
-+		return 1;
-+	}
-+	else {
-+		printk("ADM699X not Found\n");
-+		return 0;
-+	}
-+}
-+
---- /dev/null
-+++ b/drivers/net/sl351x_crc16.c
-@@ -0,0 +1,93 @@
-+/****************************************************************************
-+* Name			: sl351x_crc16.c
-+* Description	:
-+*		Implement CRC16
-+*		refer to RFC1662
-+* History
-+*
-+*	Date		Writer		Description
-+*	-----------	-----------	-------------------------------------------------
-+*	09/14/2005	Gary Chen	Create
-+*
-+****************************************************************************/
-+
-+#define INITFCS16		0xffff  /* Initial FCS value */
-+#define GOODFCS16		0xf0b8  /* Good final FCS value */
-+#define SWAP_WORD(x)	(unsigned short)((((unsigned short)x & 0x00FF) << 8) |	\
-+										 (((unsigned short)x & 0xFF00) >> 8))
-+
-+/*----------------------------------------------------------------------
-+* 	x**0 + x**5 + x**12 + x**16
-+*----------------------------------------------------------------------*/
-+static const unsigned short crc16_tbl[256] = {
-+      0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-+      0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-+      0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-+      0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
-+      0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
-+      0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
-+      0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
-+      0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
-+      0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
-+      0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
-+      0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
-+      0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
-+      0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
-+      0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
-+      0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
-+      0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
-+      0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
-+      0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
-+      0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
-+      0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
-+      0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
-+      0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
-+      0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
-+      0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
-+      0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
-+      0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
-+      0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
-+      0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
-+      0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
-+      0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
-+      0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
-+      0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-+};
-+
-+/*----------------------------------------------------------------------
-+* hash_crc16
-+*----------------------------------------------------------------------*/
-+unsigned short hash_crc16(unsigned short crc, unsigned char *datap, unsigned long len)
-+{
-+    while (len--)
-+    {
-+        crc = (crc >> 8) ^ crc16_tbl[(crc ^ (*datap++)) & 0xff];
-+    }
-+
-+    return (crc);
-+
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_check_crc16
-+*----------------------------------------------------------------------*/
-+unsigned long hash_check_crc16(unsigned char *datap, unsigned long len)
-+{
-+    unsigned short crc;
-+
-+    crc = hash_crc16(INITFCS16, datap, len );
-+    return (crc == GOODFCS16) ?  0 : 1;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_gen_crc16
-+*----------------------------------------------------------------------*/
-+unsigned short hash_gen_crc16(unsigned char *datap, unsigned long len)
-+{
-+    unsigned short crc;
-+
-+    crc = hash_crc16(INITFCS16, datap, len);
-+    crc ^= 0xffff;
-+
-+    return(SWAP_WORD(crc));
-+}
---- /dev/null
-+++ b/drivers/net/sl351x_gmac.c
-@@ -0,0 +1,5622 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl351x_gmac.c
-+* Description	:
-+*		Ethernet device driver for Storlink SL351x FPGA
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*	-----------	-----------	-------------------------------------------------
-+*	08/22/2005	Gary Chen	Create and implement
-+*   27/10/2005  CH Hsu      Porting to Linux
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+#define VITESSE_G5SWITCH	1
-+
-+#ifndef CONFIG_SL351x_RXTOE
-+//#define CONFIG_SL351x_RXTOE	1
-+#endif
-+#undef CONFIG_SL351x_RXTOE
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#ifdef CONFIG_SL351x_SYSCTL
-+#include 
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+#include 
-+#include 
-+#include 
-+#include 
-+#endif
-+
-+// #define SL351x_TEST_WORKAROUND
-+#ifdef CONFIG_SL351x_NAT
-+#define CONFIG_SL_NAPI					1
-+#endif
-+#define GMAX_TX_INTR_DISABLED			1
-+#define DO_HW_CHKSUM					1
-+#define ENABLE_TSO						1
-+#define GMAC_USE_TXQ0					1
-+// #define NAT_WORKAROUND_BY_RESET_GMAC	1
-+// #define HW_RXBUF_BY_KMALLOC			1
-+//#define _DUMP_TX_TCP_CONTENT	1
-+#define	br_if_ioctl						1
-+#define GMAC_LEN_1_2_ISSUE				1
-+
-+#define GMAC_EXISTED_FLAG			0x5566abcd
-+#define CONFIG_MAC_NUM				GMAC_NUM
-+#define GMAC0_BASE					TOE_GMAC0_BASE
-+#define GMAC1_BASE					TOE_GMAC1_BASE
-+#define PAUSE_SET_HW_FREEQ			(TOE_HW_FREEQ_DESC_NUM / 2)
-+#define PAUSE_REL_HW_FREEQ			((TOE_HW_FREEQ_DESC_NUM / 2) + 10)
-+#define DEFAULT_RXQ_MAX_CNT			256
-+#ifdef	L2_jumbo_frame
-+#define TCPHDRLEN(tcp_hdr)  ((ntohs(*((__u16 *)tcp_hdr + 6)) >> 12) & 0x000F)
-+#endif
-+
-+/* define chip information */
-+#define DRV_NAME					"SL351x"
-+#define DRV_VERSION					"0.1.4"
-+#define SL351x_DRIVER_NAME  		DRV_NAME " Giga Ethernet driver " DRV_VERSION
-+
-+#define toe_gmac_enable_interrupt(irq)	enable_irq(irq)
-+#define toe_gmac_disable_interrupt(irq)	disable_irq(irq)
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+#define GMAC_SHORT_FRAME_THRESHOLD		10
-+static struct timer_list gmac_workround_timer_obj;
-+void sl351x_poll_gmac_hanged_status(u32 data);
-+#ifdef CONFIG_SL351x_NAT
-+//#define IxscriptMate_1518				1
-+	void sl351x_nat_workaround_init(void);
-+	#ifndef NAT_WORKAROUND_BY_RESET_GMAC
-+		static void sl351x_nat_workaround_handler(void);
-+	#endif
-+#endif
-+#endif
-+
-+#ifdef GMAC_LEN_1_2_ISSUE
-+	#define _DEBUG_PREFETCH_NUM	256
-+static	int	_debug_prefetch_cnt;
-+static	char _debug_prefetch_buf[_DEBUG_PREFETCH_NUM][4] __attribute__((aligned(4)));
-+#endif
-+/*************************************************************
-+ *         Global Variable
-+ *************************************************************/
-+static int	gmac_initialized = 0;
-+TOE_INFO_T toe_private_data;
-+//static int		do_again = 0;
-+spinlock_t gmac_fq_lock;
-+unsigned int FLAG_SWITCH;
-+
-+static unsigned int     	next_tick = 3 * HZ;
-+static unsigned char    	eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
-+
-+#undef CONFIG_SL351x_RXTOE
-+extern NAT_CFG_T nat_cfg;
-+
-+/************************************************/
-+/*                 function declare             */
-+/************************************************/
-+static int gmac_set_mac_address(struct net_device *dev, void *addr);
-+static unsigned int gmac_get_phy_vendor(int phy_addr);
-+static void gmac_set_phy_status(struct net_device *dev);
-+void gmac_get_phy_status(struct net_device *dev);
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-+static void gmac_tx_timeout(struct net_device *dev);
-+static int gmac_phy_thread (void *data);
-+struct net_device_stats * gmac_get_stats(struct net_device *dev);
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static void gmac_set_rx_mode(struct net_device *dev);
-+static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance);
-+static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp);
-+unsigned int mii_read(unsigned char phyad,unsigned char regad);
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value);
-+void mac_init_drv(void);
-+
-+static void toe_init_free_queue(void);
-+static void toe_init_swtx_queue(void);
-+static void toe_init_default_queue(void);
-+#ifdef CONFIG_SL351x_RXTOE
-+static void toe_init_interrupt_queue(void);
-+#endif
-+static void toe_init_interrupt_config(void);
-+static void toe_gmac_sw_reset(void);
-+static int toe_gmac_init_chip(struct net_device *dev);
-+static void toe_gmac_enable_tx_rx(struct net_device* dev);
-+static void toe_gmac_disable_tx_rx(struct net_device *dev);
-+static void toe_gmac_hw_start(struct net_device *dev);
-+static void toe_gmac_hw_stop(struct net_device *dev);
-+static int toe_gmac_clear_counter(struct net_device *dev);
-+static void toe_init_gmac(struct net_device *dev);
-+static  void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid, struct net_device *dev, int interrupt);
-+#ifdef CONFIG_SL_NAPI
-+static int gmac_rx_poll(struct net_device *dev, int *budget);
-+// static void toe_gmac_disable_rx(struct net_device *dev);
-+// static void toe_gmac_enable_rx(struct net_device *dev);
-+#endif
-+
-+u32 mac_read_dma_reg(int mac, unsigned int offset);
-+void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
-+void mac_stop_txdma(struct net_device *dev);
-+void mac_get_sw_tx_weight(struct net_device *dev, char *weight);
-+void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
-+void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
-+void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
-+static inline void toe_gmac_fill_free_q(void);
-+
-+#ifdef VITESSE_G5SWITCH
-+extern int Get_Set_port_status(void);
-+extern int SPI_default(void);
-+extern unsigned int SPI_get_identifier(void);
-+void gmac_get_switch_status(struct net_device *dev);
-+unsigned int Giga_switch=0;
-+unsigned int switch_port_no=0;
-+unsigned int ever_dwon=0;
-+#endif
-+
-+/************************************************/
-+/*            GMAC function declare             */
-+/************************************************/
-+static int gmac_open (struct net_device *dev);
-+static int gmac_close (struct net_device *dev);
-+static void gmac_cleanup_module(void);
-+static void gmac_get_mac_address(void);
-+
-+#ifdef CONFIG_SL351x_NAT
-+static void toe_init_hwtx_queue(void);
-+extern void sl351x_nat_init(void);
-+extern void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off);
-+extern int sl351x_nat_output(struct sk_buff *skb, int port);
-+extern int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+extern void set_toeq_hdr(struct toe_conn* connection, TOE_INFO_T* toe, struct net_device *dev);
-+extern void sl351x_toe_init(void);
-+extern void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status);
-+extern struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr, TOE_INFO_T* toe, unsigned char* l2hdr);
-+#endif
-+
-+int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
-+void mac_set_rule_enable_bit(int mac, int rule, int data);
-+int mac_set_rule_action(int mac, int rule, int data);
-+int mac_get_MRxCRx(int mac, int rule, int ctrlreg);
-+void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data);
-+
-+/*----------------------------------------------------------------------
-+*	Ethernet Driver init
-+*----------------------------------------------------------------------*/
-+
-+static int __init gmac_init_module(void)
-+{
-+	GMAC_INFO_T 		*tp;
-+	struct net_device	*dev;
-+	int 		i,j;
-+	unsigned int	chip_id;
-+//	unsigned int chip_version;
-+
-+#ifdef CONFIG_SL3516_ASIC
-+{
-+    unsigned int    val;
-+    /* set GMAC global register */
-+    val = readl(GMAC_GLOBAL_BASE_ADDR+0x10);
-+    val = val | 0x005f0000;
-+    writel(val,GMAC_GLOBAL_BASE_ADDR+0x10);
-+//    writel(0xb737b737,GMAC_GLOBAL_BASE_ADDR+0x1c); //For Socket Board
-+    writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x20);
-+//    writel(0xa737b747,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
-+
-+	//debug_Aaron
-+    //writel(0xa7f0a7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
-+    writel(0xa7f0b7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
-+
-+    writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x24);
-+	writel(0x09200030,GMAC_GLOBAL_BASE_ADDR+0x2C);
-+	val = readl(GMAC_GLOBAL_BASE_ADDR+0x04);
-+	if((val&(1<<20))==0){           // GMAC1 enable
-+ 		val = readl(GMAC_GLOBAL_BASE_ADDR+0x30);
-+		val = (val & 0xe7ffffff) | 0x08000000;
-+		writel(val,GMAC_GLOBAL_BASE_ADDR+0x30);
-+	}
-+}
-+#endif
-+
-+#ifdef VITESSE_G5SWITCH
-+	Giga_switch = SPI_get_identifier();
-+	if(Giga_switch)
-+		switch_port_no = SPI_default();
-+#endif
-+
-+	chip_id = readl(GMAC_GLOBAL_BASE_ADDR+0x0);
-+	if (chip_id == 0x3512C1)
-+	{
-+		writel(0x5787a5f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For 3512 Switch Board
-+		writel(0x55557777,GMAC_GLOBAL_BASE_ADDR+0x20);//For 3512 Switch Board
-+	}
-+//#endif
-+
-+	mac_init_drv();
-+
-+	printk (KERN_INFO SL351x_DRIVER_NAME " built at %s %s\n", __DATE__, __TIME__);
-+
-+//	init_waitqueue_entry(&wait, current);
-+
-+	// printk("GMAC Init......\n");
-+
-+	i = 0;
-+	for(j = 0; idev = NULL;
-+		if (tp->existed != GMAC_EXISTED_FLAG) continue;
-+
-+		dev = alloc_etherdev(0);
-+		if (dev == NULL)
-+		{
-+			printk (KERN_ERR "Can't allocate ethernet device #%d .\n",i);
-+			return -ENOMEM;
-+		}
-+
-+		dev->priv=tp;
-+		tp->dev = dev;
-+
-+		SET_MODULE_OWNER(dev);
-+
-+		// spin_lock_init(&tp->lock);
-+		spin_lock_init(&gmac_fq_lock);
-+		dev->base_addr = tp->base_addr;
-+		dev->irq = tp->irq;
-+	    dev->open = gmac_open;
-+	    dev->stop = gmac_close;
-+		dev->hard_start_xmit = gmac_start_xmit;
-+		dev->get_stats = gmac_get_stats;
-+		dev->set_multicast_list = gmac_set_rx_mode;
-+		dev->set_mac_address = gmac_set_mac_address;
-+		dev->do_ioctl = gmac_netdev_ioctl;
-+		dev->tx_timeout = gmac_tx_timeout;
-+		dev->watchdog_timeo = GMAC_DEV_TX_TIMEOUT;
-+#ifdef	L2_jumbo_frame
-+		dev->mtu = 2018; //2002  ,2018
-+#endif
-+		if (tp->port_id == 0)
-+			dev->tx_queue_len = TOE_GMAC0_SWTXQ_DESC_NUM;
-+		else
-+			dev->tx_queue_len = TOE_GMAC1_SWTXQ_DESC_NUM;
-+
-+#ifdef DO_HW_CHKSUM
-+		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
-+#ifdef ENABLE_TSO
-+		dev->features |= NETIF_F_TSO;
-+#endif
-+#endif
-+#ifdef CONFIG_SL_NAPI
-+        dev->poll = gmac_rx_poll;
-+        dev->weight = 64;
-+#endif
-+
-+		if (register_netdev(dev))
-+		{
-+			gmac_cleanup_module();
-+			return(-1);
-+		}
-+	}
-+
-+
-+//	FLAG_SWITCH = 0 ;
-+//	FLAG_SWITCH = SPI_get_identifier();
-+//	if(FLAG_SWITCH)
-+//	{
-+//		printk("Configure ADM699X...\n");
-+//		SPI_default();	//Add by jason for ADM699X configuration
-+//	}
-+	return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	gmac_cleanup_module
-+*----------------------------------------------------------------------*/
-+
-+static void gmac_cleanup_module(void)
-+{
-+    int i;
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+	del_timer(&gmac_workround_timer_obj);
-+#endif
-+
-+    for (i=0;igmac[0].base_addr = GMAC0_BASE;
-+		toe->gmac[1].base_addr = GMAC1_BASE;
-+		toe->gmac[0].dma_base_addr = TOE_GMAC0_DMA_BASE;
-+		toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
-+        toe->gmac[0].auto_nego_cfg = 1;
-+        toe->gmac[1].auto_nego_cfg = 1;
-+#ifdef CONFIG_SL3516_ASIC
-+        toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
-+        toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
-+#else
-+		toe->gmac[0].speed_cfg = GMAC_SPEED_100;
-+        toe->gmac[1].speed_cfg = GMAC_SPEED_100;
-+#endif
-+        toe->gmac[0].full_duplex_cfg = 1;
-+        toe->gmac[1].full_duplex_cfg = 1;
-+#ifdef CONFIG_SL3516_ASIC
-+        toe->gmac[0].phy_mode = GMAC_PHY_RGMII_1000;
-+        toe->gmac[1].phy_mode = GMAC_PHY_RGMII_1000;
-+#else
-+		toe->gmac[0].phy_mode = GMAC_PHY_RGMII_100;
-+        toe->gmac[1].phy_mode = GMAC_PHY_RGMII_100;
-+#endif
-+        toe->gmac[0].port_id = GMAC_PORT0;
-+        toe->gmac[1].port_id = GMAC_PORT1;
-+        toe->gmac[0].phy_addr = 0x1;
-+        toe->gmac[1].phy_addr = 2;
-+//      toe->gmac[0].irq = SL2312_INTERRUPT_GMAC0;
-+		toe->gmac[0].irq =1;
-+//      toe->gmac[1].irq = SL2312_INTERRUPT_GMAC1;
-+		toe->gmac[1].irq =2;
-+        toe->gmac[0].mac_addr1 = ð_mac[0][0];
-+        toe->gmac[1].mac_addr1 = ð_mac[1][0];
-+
-+		for (i=0; igmac[i].base_addr, GMAC_STA_ADD2, 0x55aa55aa, 0xffffffff);
-+			data = gmac_read_reg(toe->gmac[i].base_addr, GMAC_STA_ADD2);
-+			if (data == 0x55aa55aa)
-+			{
-+#ifdef VITESSE_G5SWITCH
-+				if(Giga_switch && (i==1)){
-+					toe->gmac[i].existed = GMAC_EXISTED_FLAG;
-+					break;
-+				}
-+#endif
-+				phy_vendor = gmac_get_phy_vendor(toe->gmac[i].phy_addr);
-+				if (phy_vendor != 0 && phy_vendor != 0xffffffff)
-+					toe->gmac[i].existed = GMAC_EXISTED_FLAG;
-+			}
-+		}
-+
-+		// Write GLOBAL_QUEUE_THRESHOLD_REG
-+		threshold.bits32 = 0;
-+		threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
-+		                                        TOE_SW_FREEQ_DESC_NUM/2;
-+		threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
-+		                                        TOE_HW_FREEQ_DESC_NUM/4;
-+		threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
-+		                                        TOE_TOE_DESC_NUM/4;
-+		threshold.bits.intrq = (TOE_INTR_DESC_NUM > 256) ? 256/4 :
-+		                                        TOE_INTR_DESC_NUM/4;
-+		writel(threshold.bits32, TOE_GLOBAL_BASE + GLOBAL_QUEUE_THRESHOLD_REG);
-+
-+		FLAG_SWITCH = 0;
-+		toe_gmac_sw_reset();
-+		toe_init_free_queue();
-+		toe_init_swtx_queue();
-+#ifdef CONFIG_SL351x_NAT
-+		toe_init_hwtx_queue();
-+#endif
-+		toe_init_default_queue();
-+#ifdef CONFIG_SL351x_RXTOE
-+		toe_init_interrupt_queue();
-+#endif
-+		toe_init_interrupt_config();
-+
-+#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
-+		sl351x_hash_init();
-+#else
-+	{
-+		volatile u32 *dp1, *dp2, dword;
-+
-+		dp1 = (volatile u32 *) TOE_V_BIT_BASE;
-+		dp2 = (volatile u32 *) TOE_A_BIT_BASE;
-+
-+		for (i=0; isw_freeq_desc_base_dma) ;
-+	sw_desc_ptr = (GMAC_RXDESC_T *)desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return;
-+	}
-+	memset((void *)desc_buf, 0, TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+
-+	// DMA Queue Base & Size
-+	writel((toe->sw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_SW_FREEQ_DESC_POWER,
-+			TOE_GLOBAL_BASE + GLOBAL_SW_FREEQ_BASE_SIZE_REG);
-+
-+	// init descriptor base
-+	toe->swfq_desc_base = desc_buf;
-+
-+	// SW Free Queue Read/Write Pointer
-+	rwptr_reg.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
-+	rwptr_reg.bits.rptr = 0;
-+	toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
-+	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+
-+	// SW Free Queue Descriptors
-+	for (i=0; iword0.bits.buffer_size = SW_RX_BUF_SIZE;
-+		sw_desc_ptr->word1.bits.sw_id = i;	// used to locate skb
-+		if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
-+		{
-+			printk("%s::skb buffer allocation fail !\n",__func__); while(1);
-+		}
-+		REG32(skb->data) = (unsigned int)skb;
-+		skb_reserve(skb, SKB_RESERVE_BYTES);
-+		// toe->rx_skb[i] = skb;
-+		sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
-+//   		consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
-+   		sw_desc_ptr++;
-+	}
-+
-+#ifdef CONFIG_SL351x_NAT
-+	if (sizeof(skb->cb) < 64)
-+	{
-+			printk("==> %s:: sk structure is incorrect -->Change to cb[64] !\n",__func__); while(1);
-+	}
-+	// init hardware free queues
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+						(dma_addr_t *)&toe->hw_freeq_desc_base_dma) ;
-+	desc_ptr = (GMAC_RXDESC_T *)desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return;
-+	}
-+	memset((void *)desc_buf, 0, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+
-+	// DMA Queue Base & Size
-+	writel((toe->hw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_HW_FREEQ_DESC_POWER,
-+			TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
-+
-+	// init descriptor base
-+	toe->hwfq_desc_base = desc_buf;
-+
-+	// HW Free Queue Read/Write Pointer
-+	rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
-+	rwptr_reg.bits.rptr = 0;
-+	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+#ifndef HW_RXBUF_BY_KMALLOC
-+	buf_ptr = (unsigned int)DMA_MALLOC(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE,
-+						(dma_addr_t *)&toe->hwfq_buf_base_dma);
-+#else
-+	buf_ptr = (unsigned int)kmalloc(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE, GFP_KERNEL);
-+	toe->hwfq_buf_base_dma = __pa(buf_ptr);
-+#endif
-+	if (!buf_ptr)
-+	{
-+		printk("===> %s::Failed to allocate HW TxQ Buffers!\n",__func__);
-+		while(1);	// could not be happened, if happened, adjust the buffer descriptor number
-+		return;
-+	}
-+
-+	toe->hwfq_buf_base = buf_ptr;
-+	toe->hwfq_buf_end_dma = toe->hwfq_buf_base_dma + (TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE);
-+	buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
-+	for (i=0; iword0.bits.buffer_size = HW_RX_BUF_SIZE;
-+		desc_ptr->word1.bits.sw_id = i;
-+		desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
-+//   		consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
-+   		// consistent_sync((unsigned int)buf_ptr, HW_RX_BUF_SIZE, PCI_DMA_TODEVICE);
-+   		desc_ptr++;
-+   		buf_ptr += HW_RX_BUF_SIZE;
-+	}
-+#else
-+	// DMA Queue Base & Size
-+	writel((0) | TOE_SW_FREEQ_DESC_POWER,
-+			TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
-+	rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
-+	rwptr_reg.bits.rptr = 0;
-+	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+
-+#endif
-+}
-+/*----------------------------------------------------------------------
-+*	toe_init_swtx_queue
-+*	(2) Initialize the GMAC 0/1 SW TXQ Queue Descriptor Base Address & sizeup
-+*		GMAC_SW_TX_QUEUE_BASE_REG(0x0050)
-+*	(2) Initialize DMA Read/Write pointer for
-+*		GMAC 0/1 SW TX Q0-5
-+*----------------------------------------------------------------------*/
-+static void toe_init_swtx_queue(void)
-+{
-+	int 				i;
-+	TOE_INFO_T			*toe;
-+	DMA_RWPTR_T			rwptr_reg;
-+	unsigned int 		rwptr_addr;
-+	unsigned int		desc_buf;
-+
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+	// GMAC-0, SW-TXQ
-+	// The GMAC-0 and GMAC-0 maybe have different descriptor number
-+	// so, not use for instruction
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+						(dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma) ;
-+	toe->gmac[0].swtxq_desc_base = desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_buf, 0,	TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+	writel((toe->gmac[0].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_SWTXQ_DESC_POWER,
-+			TOE_GMAC0_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
-+
-+	// GMAC0 SW TX Q0-Q5
-+	rwptr_reg.bits.wptr = 0;
-+	rwptr_reg.bits.rptr = 0;
-+	rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
-+	for (i=0; igmac[0].swtxq[i].rwptr_reg = rwptr_addr;
-+		toe->gmac[0].swtxq[i].desc_base = desc_buf;
-+		toe->gmac[0].swtxq[i].total_desc_num = TOE_GMAC0_SWTXQ_DESC_NUM;
-+		desc_buf += TOE_GMAC0_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+		writel(rwptr_reg.bits32, rwptr_addr);
-+		rwptr_addr+=4;
-+	}
-+
-+	// GMAC-1, SW-TXQ
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+						(dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma) ;
-+	toe->gmac[1].swtxq_desc_base = desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_buf, 0,	TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+	writel((toe->gmac[1].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_SWTXQ_DESC_POWER,
-+			TOE_GMAC1_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
-+
-+
-+	// GMAC1 SW TX Q0-Q5
-+	rwptr_reg.bits.wptr = 0;
-+	rwptr_reg.bits.rptr = 0;
-+	rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
-+	for (i=0; igmac[1].swtxq[i].rwptr_reg = rwptr_addr;
-+		toe->gmac[1].swtxq[i].desc_base = desc_buf;
-+		toe->gmac[1].swtxq[i].total_desc_num = TOE_GMAC1_SWTXQ_DESC_NUM;
-+		desc_buf += TOE_GMAC1_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+		writel(rwptr_reg.bits32, rwptr_addr);
-+		rwptr_addr+=4;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_hwtx_queue
-+*	(2) Initialize the GMAC 0/1 HW TXQ Queue Descriptor Base Address & size
-+*		GMAC_HW_TX_QUEUE_BASE_REG(0x0054)
-+*	(2) Initialize DMA Read/Write pointer for
-+*		GMAC 0/1 HW TX Q0-5
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void toe_init_hwtx_queue(void)
-+{
-+	int 				i;
-+	TOE_INFO_T			*toe;
-+	DMA_RWPTR_T			rwptr_reg;
-+	unsigned int 		rwptr_addr;
-+	unsigned int		desc_buf;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	// GMAC-0, HW-TXQ
-+	// The GMAC-0 and GMAC-0 maybe have different descriptor number
-+	// so, not use for instruction
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+						(dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma) ;
-+	toe->gmac[0].hwtxq_desc_base = desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_buf, 0,	TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+	writel((toe->gmac[0].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_HWTXQ_DESC_POWER,
-+			TOE_GMAC0_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
-+
-+	// GMAC0 HW TX Q0-Q5
-+	rwptr_reg.bits.wptr = 0;
-+	rwptr_reg.bits.rptr = 0;
-+	rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+	for (i=0; igmac[0].hwtxq[i].desc_base = desc_buf;
-+		desc_buf += TOE_GMAC0_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+		writel(rwptr_reg.bits32, rwptr_addr);
-+		rwptr_addr+=4;
-+	}
-+
-+	// GMAC-1, HW-TXQ
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+						(dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma) ;
-+	toe->gmac[1].hwtxq_desc_base = desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_buf, 0,	TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+	writel((toe->gmac[1].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_HWTXQ_DESC_POWER,
-+			TOE_GMAC1_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
-+
-+	// GMAC1 HW TX Q0-Q5
-+	rwptr_reg.bits.wptr = 0;
-+	rwptr_reg.bits.rptr = 0;
-+	rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+	for (i=0; igmac[1].hwtxq[i].desc_base = desc_buf;
-+		desc_buf += TOE_GMAC1_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+		writel(rwptr_reg.bits32, rwptr_addr);
-+		rwptr_addr+=4;
-+	}
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_default_queue
-+*	(1) Initialize the default 0/1 Queue Header
-+*		Register: TOE_DEFAULT_Q0_HDR_BASE (0x60002000)
-+*				  TOE_DEFAULT_Q1_HDR_BASE (0x60002008)
-+*	(2)	Initialize Descriptors of Default Queue 0/1
-+*----------------------------------------------------------------------*/
-+static void toe_init_default_queue(void)
-+{
-+	TOE_INFO_T				*toe;
-+	volatile NONTOE_QHDR_T	*qhdr;
-+	GMAC_RXDESC_T			*desc_ptr;
-+	DMA_SKB_SIZE_T			skb_size;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+											(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
-+	if (!desc_ptr)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+	toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
-+	toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
-+	qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
-+	qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
-+	qhdr->word1.bits32 = 0;
-+	toe->gmac[0].rx_rwptr.bits32 = 0;
-+	toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
-+	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+											(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
-+	if (!desc_ptr)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_ptr, 0, TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+	toe->gmac[1].default_desc_base = (unsigned int)desc_ptr;
-+	toe->gmac[1].default_desc_num = TOE_DEFAULT_Q1_DESC_NUM;
-+	qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q1_HDR_BASE;
-+	qhdr->word0.base_size = ((unsigned int)toe->gmac[1].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q1_DESC_POWER;
-+	qhdr->word1.bits32 = 0;
-+	toe->gmac[1].rx_rwptr.bits32 = 0;
-+	toe->gmac[1].default_qhdr = (NONTOE_QHDR_T *)qhdr;
-+
-+	skb_size.bits.hw_skb_size = HW_RX_BUF_SIZE;
-+	skb_size.bits.sw_skb_size = SW_RX_BUF_SIZE;
-+	writel(skb_size.bits32, TOE_GLOBAL_BASE + GLOBAL_DMA_SKB_SIZE_REG);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_interrupt_queue
-+*	(1) Initialize the Interrupt Queue Header
-+*		Register: TOE_INTR_Q_HDR_BASE (0x60002080)
-+*	(2)	Initialize Descriptors of Interrupt Queues
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static void toe_init_interrupt_queue(void)
-+{
-+	TOE_INFO_T				*toe;
-+	volatile NONTOE_QHDR_T	*qhdr;
-+	INTR_QHDR_T				*desc_ptr;
-+	// unsigned int			desc_buf_addr;
-+	int						i;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	desc_ptr = (INTR_QHDR_T *)DMA_MALLOC((TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T)),
-+											(dma_addr_t *)&toe->intr_desc_base_dma);
-+	if (!desc_ptr)
-+	{
-+		printk("%s::DMA_MALLOC interrupt queue fail !\n",__func__);
-+		return	;
-+	}
-+	/*
-+	desc_buf_addr = (unsigned int)DMA_MALLOC((TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T)),
-+												(dma_addr_t *)&toe->intr_buf_base_dma);
-+	if (!desc_buf_addr)
-+	{
-+		printk("%s::DMA_MALLOC interrupt desc fail !\n",__func__);
-+		return	;
-+	}*/
-+	printk("#### %s::Intr Q desc %x\n", __func__, (u32)desc_ptr);
-+
-+	memset((void *)desc_ptr, 0, TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T));
-+//	memset((void *)desc_buf_addr, 0, TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T));
-+	toe->intr_desc_base = (unsigned int)desc_ptr;
-+	toe->intr_desc_num = TOE_INTR_DESC_NUM;
-+
-+	qhdr = (volatile NONTOE_QHDR_T *)TOE_INTR_Q_HDR_BASE;
-+//	intrq = (INTRQ_INFO_T*) &toe->intrq[0];
-+	for (i=0; iword0.base_size = ((unsigned int)toe->intr_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_INTR_DESC_POWER;
-+		qhdr->word1.bits32 = 0;
-+		desc_ptr += TOE_INTR_DESC_NUM;
-+	}
-+}
-+
-+#endif
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_interrupt_config
-+*	Interrupt Select Registers are used to map interrupt to int0 or int1
-+*	Int0 and int1 are wired to CPU 0/1 GMAC 0/1
-+* 	Interrupt Device Inteface data are used to pass device info to
-+*		upper device deiver or store status/statistics
-+*	ISR handler
-+*		(1) If status bit ON but masked, the prinf error message (bug issue)
-+*		(2) If select bits are for me, handle it, else skip to let
-+*			the other ISR handles it.
-+*  Notes:
-+*		GMACx init routine (for eCOS) or open routine (for Linux)
-+*       enable the interrupt bits only which are selected for him.
-+*
-+*	Default Setting:
-+*		GMAC0 intr bits ------>	int0 ----> eth0
-+*		GMAC1 intr bits ------> int1 ----> eth1
-+*		TOE intr -------------> int0 ----> eth0
-+*		Classification Intr --> int0 ----> eth0
-+*		Default Q0 -----------> int0 ----> eth0
-+*		Default Q1 -----------> int1 ----> eth1
-+*----------------------------------------------------------------------*/
-+static void toe_init_interrupt_config(void)
-+{
-+	// clear all status bits
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+	// Init select registers
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
-+	// disable all interrupt
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_gmac
-+*----------------------------------------------------------------------*/
-+static void toe_init_gmac(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	TOE_INFO_T		*toe;
-+	u32 			data;
-+
-+	if (!gmac_initialized)
-+		return ;
-+
-+	if (!tp->existed)
-+		return;
-+
-+	tp->dev = dev;
-+	tp->flow_control_enable = 1;
-+	tp->pre_phy_status = LINK_DOWN;
-+	tp->full_duplex_status = tp->full_duplex_cfg;
-+	tp->speed_status = tp->speed_status;
-+
-+#if 0
-+   /* get mac address from FLASH */
-+    gmac_get_mac_address();
-+#endif
-+
-+    /* set PHY register to start autonegition process */
-+    gmac_set_phy_status(dev);
-+
-+	/* GMAC initialization */
-+	if ( toe_gmac_init_chip(dev) )
-+	{
-+		printk ("GMAC %d init fail\n", tp->port_id);
-+	}
-+
-+    /* clear statistic counter */
-+    toe_gmac_clear_counter(dev);
-+
-+	memset((void *)&tp->ifStatics, 0, sizeof(struct net_device_stats));
-+
-+	/* -----------------------------------------------------------
-+	Enable GMAC interrupt & disable loopback
-+	Notes:
-+		GMACx init routine (for eCOS) or open routine (for Linux)
-+		enable the interrupt bits only which are selected for him.
-+	--------------------------------------------------------------*/
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+	// Enable Interrupt Bits
-+	if (tp->port_id == 0)
-+	{
-+		tp->intr0_selected =	GMAC0_TXDERR_INT_BIT	 | GMAC0_TXPERR_INT_BIT		|
-+	                         	GMAC0_RXDERR_INT_BIT	 | GMAC0_RXPERR_INT_BIT		|
-+	                            GMAC0_SWTQ05_FIN_INT_BIT | GMAC0_SWTQ05_EOF_INT_BIT |
-+	                            GMAC0_SWTQ04_FIN_INT_BIT | GMAC0_SWTQ04_EOF_INT_BIT |
-+	                            GMAC0_SWTQ03_FIN_INT_BIT | GMAC0_SWTQ03_EOF_INT_BIT |
-+	                            GMAC0_SWTQ02_FIN_INT_BIT | GMAC0_SWTQ02_EOF_INT_BIT |
-+	                            GMAC0_SWTQ01_FIN_INT_BIT | GMAC0_SWTQ01_EOF_INT_BIT |
-+	                            GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
-+
-+#ifdef GMAX_TX_INTR_DISABLED
-+	    tp->intr0_enabled =		0;
-+#else
-+	    tp->intr0_enabled =		GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
-+#endif
-+
-+	    tp->intr1_selected =	TOE_IQ_ALL_BITS			 | TOE_CLASS_RX_INT_BITS	|
-+	    						GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
-+	    						GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT |
-+	    						DEFAULT_Q0_INT_BIT;
-+	    tp->intr1_enabled = 	DEFAULT_Q0_INT_BIT | TOE_IQ_ALL_BITS;
-+	    tp->intr2_selected = 	0xffffffff;	 // TOE Queue 32-63 FUUL Intr
-+	    tp->intr2_enabled = 	0xffffffff;
-+	    tp->intr3_selected = 	0xffffffff;	 // TOE Queue 0-31 FUUL Intr
-+	    tp->intr3_enabled = 	0xffffffff;
-+	    tp->intr4_selected = 	GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
-+	    						HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
-+	    tp->intr4_enabled = 	GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
-+
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+	}
-+	else
-+	{
-+		tp->intr0_selected =	GMAC1_TXDERR_INT_BIT	 | GMAC1_TXPERR_INT_BIT		|
-+	                         	GMAC1_RXDERR_INT_BIT	 | GMAC1_RXPERR_INT_BIT		|
-+	                            GMAC1_SWTQ15_FIN_INT_BIT | GMAC1_SWTQ15_EOF_INT_BIT |
-+	                            GMAC1_SWTQ14_FIN_INT_BIT | GMAC1_SWTQ14_EOF_INT_BIT |
-+	                            GMAC1_SWTQ13_FIN_INT_BIT | GMAC1_SWTQ13_EOF_INT_BIT |
-+	                            GMAC1_SWTQ12_FIN_INT_BIT | GMAC1_SWTQ12_EOF_INT_BIT |
-+	                            GMAC1_SWTQ11_FIN_INT_BIT | GMAC1_SWTQ11_EOF_INT_BIT |
-+	                            GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
-+#ifdef GMAX_TX_INTR_DISABLED
-+	    tp->intr0_enabled =		0;
-+#else
-+	    tp->intr0_enabled =		GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
-+#endif
-+
-+	    tp->intr1_selected =	DEFAULT_Q1_INT_BIT;
-+	    tp->intr1_enabled = 	DEFAULT_Q1_INT_BIT | TOE_IQ_ALL_BITS;
-+	    tp->intr2_selected = 	0;	 // TOE Queue 32-63 FUUL Intr
-+	    tp->intr2_enabled = 	0;
-+	    tp->intr3_selected = 	0;	 // TOE Queue 0-31 FUUL Intr
-+	    tp->intr3_enabled = 	0;
-+	    tp->intr4_selected = 	GMAC1_INT_BITS;
-+	    tp->intr4_enabled = 	GMAC1_INT_BITS;
-+
-+	    if (toe->gmac[0].existed != GMAC_EXISTED_FLAG)
-+	    {
-+	    	tp->intr1_selected	|= 	TOE_IQ_ALL_BITS | TOE_CLASS_RX_INT_BITS	|
-+	    						  	GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
-+	    						  	GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT;
-+	    	tp->intr1_enabled	|= 	TOE_IQ_ALL_BITS;
-+	    	tp->intr2_selected	|= 	0xffffffff;	 // TOE Queue 32-63 FUUL Intr
-+	    	tp->intr2_enabled	|= 	0xffffffff;
-+	    	tp->intr3_selected	|= 	0xffffffff;	 // TOE Queue 0-31 FUUL Intr
-+	    	tp->intr3_enabled	|= 	0xffffffff;
-+	    	tp->intr4_selected 	|= 	CLASS_RX_FULL_INT_BITS |
-+	    							HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
-+	    	tp->intr4_enabled	|= 	SWFQ_EMPTY_INT_BIT;
-+		}
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) | tp->intr1_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) | tp->intr2_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) | tp->intr3_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) | tp->intr4_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+	}
-+
-+	// enable only selected bits
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_0_REG,
-+					tp->intr0_enabled, tp->intr0_selected);
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_1_REG,
-+					tp->intr1_enabled, tp->intr1_selected);
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_2_REG,
-+					tp->intr2_enabled, tp->intr2_selected);
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_3_REG,
-+					tp->intr3_enabled, tp->intr3_selected);
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+					tp->intr4_enabled, tp->intr4_selected);
-+
-+    /* start DMA process */
-+	toe_gmac_hw_start(dev);
-+
-+    /* enable tx/rx register */
-+    toe_gmac_enable_tx_rx(dev);
-+
-+//	toe_gmac_enable_interrupt(tp->irq);
-+
-+    return ;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_sw_reset
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_sw_reset(void)
-+{
-+	unsigned int	reg_val;
-+	reg_val = readl(GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG) | 0x00000060;   /* GMAC0 S/W reset */
-+    writel(reg_val,GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG);
-+    udelay(100);
-+    return;
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_init_chip
-+*----------------------------------------------------------------------*/
-+static int toe_gmac_init_chip(struct net_device *dev)
-+{
-+	GMAC_INFO_T 	*tp = dev->priv;
-+	GMAC_CONFIG2_T	config2_val;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+	GMAC_CONFIG1_T	config1;
-+	#ifdef CONFIG_SL351x_NAT
-+	GMAC_CONFIG3_T	config3_val;
-+	#endif
-+	GMAC_TX_WCR0_T	hw_weigh;
-+	GMAC_TX_WCR1_T	sw_weigh;
-+//	GMAC_HASH_ENABLE_REG0_T hash_ctrl;
-+//
-+#if 0 /* mac address will be set in late_initcall */
-+	struct sockaddr sock;
-+	// GMAC_AHB_WEIGHT_T	ahb_weight, ahb_weight_mask;
-+
-+
-+	/* set station MAC address1 and address2 */
-+	memcpy(&sock.sa_data[0],ð_mac[tp->port_id][0],6);
-+	gmac_set_mac_address(dev,(void *)&sock);
-+#endif
-+
-+	/* set RX_FLTR register to receive all multicast packet */
-+	gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
-+	//    gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
-+	//gmac_write_reg(tp->base_addr, GMAC_RX_FLTR,0x00000007,0x0000001f);
-+
-+	/* set per packet buffer size */
-+	//	config1.bits32 = 0x002004;	//next version
-+	/* set flow control threshold */
-+	config1.bits32 = 0;
-+	config1.bits.set_threshold = 32 / 2;
-+	config1.bits.rel_threshold = 32 / 4 * 3;
-+	gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
-+
-+	/* set flow control threshold */
-+	config2_val.bits32 = 0;
-+	config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
-+	config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
-+	gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
-+
-+	#ifdef CONFIG_SL351x_NAT
-+	/* set HW free queue flow control threshold */
-+	config3_val.bits32 = 0;
-+	config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
-+	config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
-+	gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
-+	#endif
-+	/* set_mcast_filter mask*/
-+	//	gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
-+	//  gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
-+
-+	/* disable TX/RX and disable internal loop back */
-+	config0.bits32 = 0;
-+	config0_mask.bits32 = 0;
-+
-+	//debug_Aaron
-+#ifdef	L2_jumbo_frame
-+	config0.bits.max_len = 5;
-+#else
-+	config0.bits.max_len = 2;
-+#endif
-+
-+	if (tp->flow_control_enable==1)
-+	{
-+		config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+		config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+		printk("Enable MAC Flow Control...\n");
-+	}
-+	else
-+	{
-+		config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+		config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+		printk("Disable MAC Flow Control...\n");
-+	}
-+	config0.bits.dis_rx = 1;  /* disable rx */
-+	config0.bits.dis_tx = 1;  /* disable tx */
-+	config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
-+	config0.bits.rx_err_detect = 1;
-+	config0.bits.rgmii_en = 0;
-+	config0.bits.rgmm_edge = 1;
-+	config0.bits.rxc_inv = 0;
-+	config0.bits.ipv4_rx_chksum = 1;  /* enable H/W to check ip checksum */
-+	config0.bits.ipv6_rx_chksum = 1;  /* enable H/W to check ip checksum */
-+	config0.bits.port0_chk_hwq = 1;	// GaryChen 3/24/2006 2:26PM
-+	config0.bits.port1_chk_hwq = 1;	// GaryChen 3/24/2006 2:26PM
-+	config0.bits.port0_chk_toeq = 1;
-+	config0.bits.port1_chk_toeq = 1;
-+	config0.bits.port0_chk_classq = 1;
-+	config0.bits.port1_chk_classq = 1;
-+
-+	config0_mask.bits.max_len = 7;
-+	config0_mask.bits.tx_fc_en = 1;
-+	config0_mask.bits.rx_fc_en = 1;
-+	config0_mask.bits.dis_rx = 1;
-+	config0_mask.bits.dis_tx = 1;
-+	config0_mask.bits.loop_back = 1;
-+	config0_mask.bits.rgmii_en = 1;
-+	config0_mask.bits.rgmm_edge = 1;
-+	config0_mask.bits.rxc_inv = 1;
-+	config0_mask.bits.ipv4_rx_chksum = 1;
-+	config0_mask.bits.ipv6_rx_chksum = 1;
-+	config0_mask.bits.port0_chk_hwq = 1;
-+	config0_mask.bits.port1_chk_hwq = 1;
-+	config0_mask.bits.port0_chk_toeq = 1;
-+	config0_mask.bits.port1_chk_toeq = 1;
-+	config0_mask.bits.port0_chk_classq = 1;
-+	config0_mask.bits.port1_chk_classq = 1;
-+	config0_mask.bits.rx_err_detect = 1;
-+
-+	#if 0
-+	config0.bits.dis_rx = 1;  /* disable rx */
-+	config0.bits.dis_tx = 1;  /* disable tx */
-+	config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
-+	config0.bits.txc_inv = 0;
-+	config0.bits.rgmii_en = 0;
-+	config0.bits.rgmm_edge = 1;
-+	config0.bits.rxc_inv = 1;
-+	config0.bits.ipv4_tss_rx_en = 1;  /* enable H/W to check ip checksum */
-+	config0.bits.ipv6_tss_rx_en = 1;  /* enable H/W to check ip checksum */
-+
-+	config0_mask.bits.max_len = 3;
-+	config0_mask.bits.tx_fc_en = 1;
-+	config0_mask.bits.rx_fc_en = 1;
-+	config0_mask.bits.dis_rx = 1;
-+	config0_mask.bits.dis_tx = 1;
-+	config0_mask.bits.loop_back = 1;
-+	config0_mask.bits.rgmii_en = 1;
-+	config0_mask.bits.rgmm_edge = 1;
-+	config0_mask.bits.txc_inv = 1;
-+	config0_mask.bits.rxc_inv = 1;
-+	config0_mask.bits.ipv4_tss_rx_en = 1;
-+	config0_mask.bits.ipv6_tss_rx_en = 1;
-+	#endif
-+
-+	gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+
-+	#if 1
-+	hw_weigh.bits32 = 0;
-+	hw_weigh.bits.hw_tq3 = 1;
-+	hw_weigh.bits.hw_tq2 = 1;
-+	hw_weigh.bits.hw_tq1 = 1;
-+	hw_weigh.bits.hw_tq0 = 1;
-+	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
-+
-+	sw_weigh.bits32 = 0;
-+	sw_weigh.bits.sw_tq5 = 1;
-+	sw_weigh.bits.sw_tq4 = 1;
-+	sw_weigh.bits.sw_tq3 = 1;
-+	sw_weigh.bits.sw_tq2 = 1;
-+	sw_weigh.bits.sw_tq1 = 1;
-+	sw_weigh.bits.sw_tq0 = 1;
-+	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
-+	#endif
-+
-+	#if 0
-+	ahb_weight.bits32 = 0;
-+	ahb_weight_mask.bits32 = 0;
-+	ahb_weight.bits.rx_weight = 1;
-+	ahb_weight.bits.tx_weight = 1;
-+	ahb_weight.bits.hash_weight = 1;
-+	ahb_weight.bits.pre_req = 0x1f;
-+	ahb_weight.bits.tqDV_threshold = 0;
-+	ahb_weight_mask.bits.rx_weight = 0x1f;
-+	ahb_weight_mask.bits.tx_weight = 0x1f;
-+	ahb_weight_mask.bits.hash_weight = 0x1f;
-+	ahb_weight_mask.bits.pre_req = 0x1f;
-+	ahb_weight_mask.bits.tqDV_threshold = 0x1f;
-+	gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
-+	#endif
-+
-+	#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
-+	#endif
-+	#ifdef CONFIG_SL351x_NAT
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR1, IPPROTO_UDP, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR2, IPPROTO_GRE, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR3, 0xff, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR4, 0xff, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR5, 0xff, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR6, 0xff, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR7, 0xff, 0xffffffff);
-+
-+	sl351x_nat_init();
-+	#endif
-+
-+	#ifdef CONFIG_SL351x_RXTOE
-+	/* setup matching rule to TOE */
-+	sl351x_toe_init();
-+	#endif
-+
-+	// for A1 ASIC version
-+//	hash_ctrl.bits32 = 0;
-+//	hash_ctrl.bits.timing = 6;
-+//	gmac_write_reg(tp->dma_base_addr, GMAC_HASH_ENGINE_REG0, hash_ctrl.bits32, 0xffffffff);
-+
-+	return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_enable_tx_rx
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_enable_tx_rx(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 0;  /* enable rx */
-+    config0.bits.dis_tx = 0;  /* enable tx */
-+    config0_mask.bits.dis_rx = 1;
-+    config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+/*----------------------------------------------------------------------
-+*	toe_gmac_disable_rx
-+*----------------------------------------------------------------------*/
-+#if 0
-+static void toe_gmac_disable_rx(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 1;  /* disable rx */
-+//    config0.bits.dis_tx = 1;  /* disable tx */
-+    config0_mask.bits.dis_rx = 1;
-+//     config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+*	toe_gmac_enable_rx
-+*----------------------------------------------------------------------*/
-+#if 0
-+static void toe_gmac_enable_rx(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 0;  /* enable rx */
-+//    config0.bits.dis_tx = 0;  /* enable tx */
-+    config0_mask.bits.dis_rx = 1;
-+//    config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+*	toe_gmac_disable_tx_rx
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_disable_tx_rx(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 1;  /* disable rx */
-+    config0.bits.dis_tx = 1;  /* disable tx */
-+    config0_mask.bits.dis_rx = 1;
-+    config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_hw_start
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_hw_start(struct net_device *dev)
-+{
-+	GMAC_INFO_T				*tp = (GMAC_INFO_T *)dev->priv;
-+	GMAC_DMA_CTRL_T			dma_ctrl, dma_ctrl_mask;
-+
-+
-+    /* program dma control register */
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.rd_enable = 1;
-+	dma_ctrl.bits.td_enable = 1;
-+	dma_ctrl.bits.loopback = 0;
-+	dma_ctrl.bits.drop_small_ack = 0;
-+	dma_ctrl.bits.rd_prot = 0;
-+	dma_ctrl.bits.rd_burst_size = 3;
-+	dma_ctrl.bits.rd_insert_bytes = RX_INSERT_BYTES;
-+	dma_ctrl.bits.rd_bus = 3;
-+	dma_ctrl.bits.td_prot = 0;
-+	dma_ctrl.bits.td_burst_size = 3;
-+	dma_ctrl.bits.td_bus = 3;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.rd_enable = 1;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+	dma_ctrl_mask.bits.loopback = 1;
-+	dma_ctrl_mask.bits.drop_small_ack = 1;
-+	dma_ctrl_mask.bits.rd_prot = 3;
-+	dma_ctrl_mask.bits.rd_burst_size = 3;
-+	dma_ctrl_mask.bits.rd_insert_bytes = 3;
-+	dma_ctrl_mask.bits.rd_bus = 3;
-+	dma_ctrl_mask.bits.td_prot = 0x0f;
-+	dma_ctrl_mask.bits.td_burst_size = 3;
-+	dma_ctrl_mask.bits.td_bus = 3;
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+
-+    return;
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_hw_stop
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_hw_stop(struct net_device *dev)
-+{
-+	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
-+	GMAC_DMA_CTRL_T		dma_ctrl, dma_ctrl_mask;
-+
-+    /* program dma control register */
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.rd_enable = 0;
-+	dma_ctrl.bits.td_enable = 0;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.rd_enable = 1;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_clear_counter
-+*----------------------------------------------------------------------*/
-+static int toe_gmac_clear_counter (struct net_device *dev)
-+{
-+	GMAC_INFO_T	*tp = (GMAC_INFO_T *)dev->priv;
-+
-+    /* clear counter */
-+    gmac_read_reg(tp->base_addr, GMAC_IN_DISCARDS);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_ERRORS);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_MCAST);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_BCAST);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_MAC1);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_MAC2);
-+		tp->ifStatics.tx_bytes = 0;
-+		tp->ifStatics.tx_packets = 0;
-+		tp->ifStatics.tx_errors = 0;
-+		tp->ifStatics.rx_bytes = 0;
-+		tp->ifStatics.rx_packets = 0;
-+		tp->ifStatics.rx_errors = 0;
-+		tp->ifStatics.rx_dropped = 0;
-+	return (0);
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_tx_complete
-+*----------------------------------------------------------------------*/
-+static  void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid,
-+   										struct net_device *dev, int interrupt)
-+{
-+	volatile GMAC_TXDESC_T	*curr_desc;
-+	GMAC_TXDESC_0_T			word0;
-+	GMAC_TXDESC_1_T			word1;
-+	unsigned int			desc_count;
-+//	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+	GMAC_SWTXQ_T			*swtxq;
-+	DMA_RWPTR_T				rwptr;
-+
-+	/* get tx H/W completed descriptor virtual address */
-+	/* check tx status and accumulate tx statistics */
-+	swtxq = &tp->swtxq[tx_qid];
-+	swtxq->intr_cnt++;
-+	for (;;)
-+	{
-+		rwptr.bits32 = readl(swtxq->rwptr_reg);
-+		if (rwptr.bits.rptr == swtxq->finished_idx)
-+			break;
-+    	curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+//   		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
-+		word0.bits32 = curr_desc->word0.bits32;
-+		word1.bits32 = curr_desc->word1.bits32;
-+
-+		if (word0.bits.status_tx_ok)
-+		{
-+			tp->ifStatics.tx_bytes += word1.bits.byte_count;
-+			desc_count = word0.bits.desc_count;
-+			if (desc_count==0)
-+			{
-+				printk("%s::Desc 0x%x = 0x%x, desc_count=%d\n",__func__, (u32)curr_desc, word0.bits32, desc_count);
-+				while(1);
-+			}
-+			while (--desc_count)
-+			{
-+				word0.bits.status_tx_ok = 0;
-+				curr_desc->word0.bits32 = word0.bits32;
-+				swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+				curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+				word0.bits32 = curr_desc->word0.bits32;
-+#ifdef _DUMP_TX_TCP_CONTENT
-+				if (curr_desc->word0.bits.buffer_size < 16)
-+				{
-+					int a;
-+					char *datap;
-+					printk("\t Tx Finished Desc 0x%x Len %d Addr 0x%08x: ", (u32)curr_desc, curr_desc->word0.bits.buffer_size, curr_desc->word2.buf_adr);
-+					datap = (char *)__va(curr_desc->word2.buf_adr);
-+					for (a=0; a<8 && aword0.bits.buffer_size; a++, datap++)
-+					{
-+						printk("0x%02x ", *datap);
-+					}
-+					printk("\n");
-+				}
-+#endif
-+			}
-+
-+			word0.bits.status_tx_ok = 0;
-+			if (swtxq->tx_skb[swtxq->finished_idx])
-+			{
-+				if (interrupt)
-+					dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
-+				else
-+					dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
-+				swtxq->tx_skb[swtxq->finished_idx] = NULL;
-+			}
-+			curr_desc->word0.bits32 = word0.bits32;
-+  			swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
-+ 			swtxq->total_finished++;
-+  			tp->ifStatics.tx_packets++;
-+			swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+		}
-+		else
-+		{
-+			// tp->ifStatics.tx_errors++;
-+			// printk("%s::Tx Descriptor is !!!\n",__func__);
-+			// wait ready by breaking
-+			break;
-+		}
-+	}
-+
-+	if (netif_queue_stopped(dev))
-+	{
-+		netif_wake_queue(dev);
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+*	gmac_start_xmit
-+*----------------------------------------------------------------------*/
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	GMAC_INFO_T 			*tp= dev->priv;
-+//	static unsigned int     pcount = 0;
-+//	unsigned int			tx_qid;
-+    DMA_RWPTR_T				rwptr;
-+	volatile GMAC_TXDESC_T	*curr_desc;
-+	int 					snd_pages = skb_shinfo(skb)->nr_frags + 1;  /* get number of descriptor */
-+	int 					frag_id = 0;
-+	int 					len, total_len = skb->len;
-+	struct net_device_stats *isPtr;
-+	unsigned int			free_desc;
-+	GMAC_SWTXQ_T			*swtxq;
-+	register unsigned long	word0, word1, word2, word3;
-+	unsigned short			wptr, rptr;
-+#ifdef	L2_jumbo_frame
-+	int header_len = skb->len;
-+	struct iphdr	*ip_hdr;
-+    struct tcphdr	*tcp_hdr;
-+    int             tcp_hdr_len;
-+    unsigned char 	*ptr;
-+    int             data_len,a;
-+    unsigned int    val;
-+#endif
-+
-+#ifdef GMAC_LEN_1_2_ISSUE
-+	int						total_pages;
-+	total_pages = snd_pages;
-+#endif
-+
-+	isPtr = (struct net_device_stats *)&tp->ifStatics;
-+#if 1
-+	if (skb->len >= 0x10000)
-+	{
-+//		spin_unlock(&tp->tx_mutex);
-+		isPtr->tx_dropped++;
-+		printk("%s::[GMAC %d] skb->len %d >= 64K\n", __func__, tp->port_id, skb->len);
-+		netif_stop_queue(dev);
-+		return 1;
-+    }
-+#endif
-+
-+#if 0
-+	if (storlink_ctl.recvfile==2)
-+	{
-+	    printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
-+	}
-+#endif
-+
-+#ifdef GMAC_USE_TXQ0
-+	#define tx_qid 	0
-+#endif
-+
-+	swtxq = &tp->swtxq[tx_qid];
-+
-+//	spin_lock(&tp->tx_mutex);
-+    rwptr.bits32 = readl(swtxq->rwptr_reg);
-+	wptr = rwptr.bits.wptr;
-+	rptr = rwptr.bits.rptr;
-+
-+	// check finished desc or empty BD
-+	// cannot check by read ptr of RW PTR register,
-+	// because the HW complete to send but the SW may NOT handle it
-+#ifndef	GMAX_TX_INTR_DISABLED
-+	if (wptr >= swtxq->finished_idx)
-+		free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
-+	else
-+		free_desc = swtxq->finished_idx - wptr - 1;
-+
-+	if (free_desc < snd_pages)
-+	{
-+//		spin_unlock(&tp->tx_mutex);
-+		isPtr->tx_dropped++;
-+//		printk("GMAC %d No available descriptor!\n", tp->port_id);
-+		netif_stop_queue(dev);
-+		return 1;
-+    }
-+#else
-+	toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-+
-+	if (wptr >= swtxq->finished_idx)
-+		free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
-+	else
-+		free_desc = swtxq->finished_idx - wptr - 1;
-+	if (free_desc < snd_pages)
-+	{
-+//		spin_unlock(&tp->tx_mutex);
-+		isPtr->tx_dropped++;
-+//		printk("GMAC %d No available descriptor!\n", tp->port_id);
-+		netif_stop_queue(dev);
-+		return 1;
-+    }
-+
-+#if 0
-+	printk("1: free_desc=%d, wptr=%d, finished_idx=%d\n", free_desc, wptr, swtxq->finished_idx);
-+	if ((free_desc < (snd_pages << 2)) ||
-+	    (free_desc < (swtxq->total_desc_num >> 2)))
-+	{
-+		printk("2: free_desc = %d\n", free_desc);
-+		toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-+		rwptr.bits32 = readl(swtxq->rwptr_reg);
-+		wptr = rwptr.bits.wptr;
-+		if (wptr>= swtxq->finished_idx)
-+			free_desc = swtxq->total_desc_num - wptr -1 + swtxq->finished_idx;
-+		else
-+			free_desc = swtxq->finished_idx - wptr - 1;
-+	}
-+#endif
-+#endif
-+
-+#ifdef	L2_jumbo_frame
-+//		data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len;
-+//		if ((skb->nh.iph->protocol == __constant_htons(ETH_P_IP)) && ((skb->nh.iph->protocol & 0x00ff)  == IPPROTO_TCP))
-+//		if (skb->nh.iph->protocol == 0x006 && (skb->nh.iph->protocol == __constant_htons(ETH_P_IP)))
-+		if (((skb->nh.iph->protocol & 0x00ff)  == IPPROTO_TCP))
-+		{
-+				ip_hdr = (struct iphdr*)(skb->nh.iph);
-+				tcp_hdr = (struct tcphdr*)(skb->h.th);
-+				tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
-+				tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
-+
-+				if ((skb->h.th->syn) && (tcp_hdr_len > 20))
-+				{
-+					ptr = (unsigned char *)(tcp_hdr+1);
-+					if ((ptr[0] == 0x02) && (ptr[1] == 0x04) && (ptr[2] == 0x07) && (ptr[3] == 0xba)) // 0x07 aa=2016-54=1962  ,0x07ba=2032-54=1978
-+					{
-+						ptr[2]=0x20;	//23
-+						ptr[3]=0x00;   	//00
-+						printk("-----> Change MSS to 8K \n" );
-+					}
-+				}
-+		}
-+//		if ((ip_hdr->protocol & 0x00ff) != IPPROTO_TCP)
-+//		if ((tcp_hdr_len > 20) && (skb->h.th->syn))
-+#endif
-+
-+
-+#if 0
-+	if (snd_pages > 1)
-+		printk("-----> snd_pages=%d\n", snd_pages);
-+	if (total_len > 1514)
-+	{
-+		printk("-----> total_len=%d\n", total_len);
-+	}
-+#endif
-+
-+    while (snd_pages)
-+    {
-+    	char *pkt_datap;
-+
-+    	curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + wptr;
-+//		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
-+#if 0
-+//#if (GMAC_DEBUG==1)
-+    	// if curr_desc->word2.buf_adr !=0 means that the ISR does NOT handle it
-+    	// if (curr_desc->word2.buf_adr)
-+    	if (swtxq->tx_skb[wptr])
-+    	{
-+    		printk("Error! Stop due to TX descriptor's buffer is not freed!\n");
-+    		while(1);
-+    		dev_kfree_skb(swtxq->tx_skb[wptr]);
-+    		swtxq->tx_skb[wptr] = NULL;
-+		}
-+#endif
-+
-+		if (frag_id == 0)
-+		{
-+#if 0
-+			int i;
-+			pkt_datap = skb->data;
-+			len = total_len;
-+			for (i=0; inr_frags; i++)
-+			{
-+				skb_frag_t* frag = &skb_shinfo(skb)->frags[i];
-+				len -= frag->size;
-+			}
-+#else
-+			pkt_datap = skb->data;
-+			len = total_len - skb->data_len;
-+#endif
-+		}
-+		else
-+		{
-+			skb_frag_t* frag = &skb_shinfo(skb)->frags[frag_id-1];
-+			pkt_datap = page_address(frag->page) + frag->page_offset;
-+			len = frag->size;
-+			if (len > total_len)
-+			{
-+				printk("===> Fatal Error! Send Frag size %d > Total Size %d!!!!!\n",
-+					len, total_len);
-+			}
-+		}
-+
-+		/* set TX descriptor */
-+		/* copy packet to descriptor buffer address */
-+		// curr_desc->word0.bits32 = len;    /* total frame byte count */
-+		word0 = len;
-+#ifdef	L2_jumbo_frame
-+		word3 = (dev->mtu+14) | EOFIE_BIT;  //2016 ,2032
-+#else
-+		word3 = 1514 | EOFIE_BIT;
-+#endif
-+
-+#ifdef DO_HW_CHKSUM
-+#ifdef	L2_jumbo_frame
-+		if (total_len >= (dev->mtu+14) && (skb->nh.iph->protocol == 0x011) && skb->nh.iph && (skb->nh.iph->frag_off & __constant_htons(0x3fff)))
-+#else
-+		if (total_len <= 1514 && ip_hdr(skb) && (ip_hdr(skb)->frag_off & __constant_htons(0x3fff)))
-+#endif
-+			word1  = total_len |
-+					TSS_IP_CHKSUM_BIT  |
-+					TSS_IPV6_ENABLE_BIT |
-+					TSS_MTU_ENABLE_BIT;
-+		else
-+			word1 = total_len |
-+					TSS_UDP_CHKSUM_BIT |
-+					TSS_TCP_CHKSUM_BIT |
-+					TSS_IP_CHKSUM_BIT  |
-+					TSS_IPV6_ENABLE_BIT |
-+					TSS_MTU_ENABLE_BIT;
-+#else
-+		word1 = total_len | TSS_MTU_ENABLE_BIT;
-+#endif
-+		word2 = (unsigned long)__pa(pkt_datap);
-+
-+		if (frag_id == 0)
-+		{
-+			word3 |= SOF_BIT;	// SOF
-+		}
-+
-+		if (snd_pages == 1)
-+		{
-+			word3 |= EOF_BIT;	// EOF
-+			swtxq->tx_skb[wptr] = skb;
-+#ifdef CONFIG_SL351x_NAT
-+			if (nat_cfg.enabled && sl351x_nat_output(skb, tp->port_id))
-+				word1 |= TSS_IP_FIXED_LEN_BIT;
-+#endif
-+		}
-+		else
-+			swtxq->tx_skb[wptr] = NULL;
-+		// word1 |= TSS_IP_FIXED_LEN_BIT;
-+#if 1
-+#ifdef CONFIG_SL351x_RXTOE
-+		// check if this frame has the mission to enable toe hash entry..
-+		// if rx_max_pktsize ==0, do not enable RXTOE
-+		if (TCP_SKB_CB(skb)->connection && storlink_ctl.rx_max_pktsize) {
-+			set_toeq_hdr(TCP_SKB_CB(skb)->connection, &toe_private_data, dev);
-+		}
-+#endif
-+#endif
-+#ifdef _DUMP_TX_TCP_CONTENT
-+		if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
-+		{
-+			int a;
-+			char *datap;
-+			printk("Tx Desc 0x%x Frag %d Len %d [IP-ID 0x%x] 0x%08x: ", (u32)curr_desc, frag_id, len, htons(skb->nh.iph->id), (u32)pkt_datap);
-+			datap = (char *)pkt_datap;
-+			for (a=0; a<8 && a= _DEBUG_PREFETCH_NUM)
-+				_debug_prefetch_cnt = 0;
-+		}
-+#endif
-+
-+		consistent_sync((void *)pkt_datap, len, PCI_DMA_TODEVICE);
-+		wmb();
-+		curr_desc->word0.bits32 = word0;
-+		curr_desc->word1.bits32 = word1;
-+		curr_desc->word2.bits32 = word2;
-+		curr_desc->word3.bits32 = word3;
-+		swtxq->curr_tx_desc = (GMAC_TXDESC_T *)curr_desc;
-+//		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_TODEVICE);
-+#ifdef _DUMP_TX_TCP_CONTENT
-+		if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
-+		{
-+			int a;
-+			char *datap;
-+			printk("\t 0x%08x: ", (u32)pkt_datap);
-+			datap = (char *)pkt_datap;
-+			for (a=0; a<8 && atotal_desc_num);
-+		frag_id++;
-+		snd_pages--;
-+	}
-+
-+    swtxq->total_sent++;
-+	SET_WPTR(swtxq->rwptr_reg, wptr);
-+	dev->trans_start = jiffies;
-+
-+
-+	// printk("MAC %d Qid %d rwptr = 0x%x, curr_desc=0x%x\n", skb->tx_port_id, tx_qid, rwptr.bits32, curr_desc);
-+//#ifdef	GMAX_TX_INTR_DISABLED
-+//		toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-+//#endif
-+	return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_set_mac_address
-+*----------------------------------------------------------------------*/
-+
-+static int gmac_set_mac_address(struct net_device *dev, void *addr)
-+{
-+	GMAC_INFO_T		*tp= dev->priv;
-+	struct sockaddr *sock;
-+	unsigned int    reg_val;
-+    unsigned int    i;
-+
-+	sock = (struct sockaddr *) addr;
-+	for (i = 0; i < 6; i++)
-+	{
-+		dev->dev_addr[i] = sock->sa_data[i];
-+	}
-+
-+    reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24);
-+    gmac_write_reg(tp->base_addr,GMAC_STA_ADD0,reg_val,0xffffffff);
-+    reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8);
-+    gmac_write_reg(tp->base_addr,GMAC_STA_ADD1,reg_val,0x0000ffff);
-+	memcpy(ð_mac[tp->port_id][0],&dev->dev_addr[0],6);
-+
-+    printk("Storlink %s address = ",dev->name);
-+    printk("%02x",dev->dev_addr[0]);
-+    printk("%02x",dev->dev_addr[1]);
-+    printk("%02x",dev->dev_addr[2]);
-+    printk("%02x",dev->dev_addr[3]);
-+    printk("%02x",dev->dev_addr[4]);
-+    printk("%02x\n",dev->dev_addr[5]);
-+
-+    return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_mac_address
-+*	get mac address from FLASH
-+*----------------------------------------------------------------------*/
-+static void gmac_get_mac_address(void)
-+{
-+#ifdef CONFIG_MTD
-+	extern int get_vlaninfo(vlaninfo* vlan);
-+    static vlaninfo    vlan[2];
-+
-+    if (get_vlaninfo(&vlan[0]))
-+    {
-+        memcpy((void *)ð_mac[0][0],vlan[0].mac,6);
-+        // VLAN_conf[0].vid = vlan[0].vlanid;
-+        // VLAN_conf[0].portmap = vlan[0].vlanmap;
-+        memcpy((void *)ð_mac[1][0],vlan[1].mac,6);
-+        // VLAN_conf[1].vid = vlan[1].vlanid;
-+        // VLAN_conf[1].portmap = vlan[1].vlanmap;
-+    }
-+#else
-+    unsigned int reg_val;
-+
-+    reg_val = readl(IO_ADDRESS(TOE_GMAC0_BASE)+0xac);
-+    eth_mac[0][4] = (reg_val & 0xff00) >> 8;
-+    eth_mac[0][5] = reg_val & 0x00ff;
-+    reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
-+    eth_mac[1][4] = (reg_val & 0xff00) >> 8;
-+    eth_mac[1][5] = reg_val & 0x00ff;
-+#endif
-+    return;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_stop_txdma
-+*----------------------------------------------------------------------*/
-+void mac_stop_txdma(struct net_device *dev)
-+{
-+	GMAC_INFO_T				*tp = (GMAC_INFO_T *)dev->priv;
-+	GMAC_DMA_CTRL_T			dma_ctrl, dma_ctrl_mask;
-+	GMAC_TXDMA_FIRST_DESC_T	txdma_busy;
-+
-+	// wait idle
-+	do
-+	{
-+		txdma_busy.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_DMA_TX_FIRST_DESC_REG);
-+	} while (txdma_busy.bits.td_busy);
-+
-+    /* program dma control register */
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.rd_enable = 0;
-+	dma_ctrl.bits.td_enable = 0;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.rd_enable = 1;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_start_txdma
-+*----------------------------------------------------------------------*/
-+void mac_start_txdma(struct net_device *dev)
-+{
-+	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
-+	GMAC_DMA_CTRL_T		dma_ctrl, dma_ctrl_mask;
-+
-+    /* program dma control register */
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.rd_enable = 1;
-+	dma_ctrl.bits.td_enable = 1;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.rd_enable = 1;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_stats
-+*----------------------------------------------------------------------*/
-+
-+struct net_device_stats * gmac_get_stats(struct net_device *dev)
-+{
-+    GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+    // unsigned int        flags;
-+    unsigned int        pkt_drop;
-+    unsigned int        pkt_error;
-+
-+    if (netif_running(dev))
-+    {
-+        /* read H/W counter */
-+        // spin_lock_irqsave(&tp->lock,flags);
-+        pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
-+        pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
-+        tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
-+        tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
-+        // spin_unlock_irqrestore(&tp->lock,flags);
-+    }
-+    return &tp->ifStatics;
-+}
-+
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_get_sw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_get_sw_tx_weight(struct net_device *dev, char *weight)
-+{
-+	GMAC_TX_WCR1_T	sw_weigh;
-+    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
-+
-+	sw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG);
-+
-+	weight[0] = sw_weigh.bits.sw_tq0;
-+   	weight[1] = sw_weigh.bits.sw_tq1;
-+   	weight[2] = sw_weigh.bits.sw_tq2;
-+   	weight[3] = sw_weigh.bits.sw_tq3;
-+   	weight[4] = sw_weigh.bits.sw_tq4;
-+   	weight[5] = sw_weigh.bits.sw_tq5;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_sw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_set_sw_tx_weight(struct net_device *dev, char *weight)
-+{
-+	GMAC_TX_WCR1_T	sw_weigh;
-+    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
-+
-+	sw_weigh.bits32 = 0;
-+	sw_weigh.bits.sw_tq0 = weight[0];
-+   	sw_weigh.bits.sw_tq1 = weight[1];
-+   	sw_weigh.bits.sw_tq2 = weight[2];
-+   	sw_weigh.bits.sw_tq3 = weight[3];
-+   	sw_weigh.bits.sw_tq4 = weight[4];
-+   	sw_weigh.bits.sw_tq5 = weight[5];
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_get_hw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_get_hw_tx_weight(struct net_device *dev, char *weight)
-+{
-+	GMAC_TX_WCR0_T	hw_weigh;
-+    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
-+
-+	hw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG);
-+
-+	weight[0] = hw_weigh.bits.hw_tq0;
-+   	weight[1] = hw_weigh.bits.hw_tq1;
-+   	weight[2] = hw_weigh.bits.hw_tq2;
-+   	weight[3] = hw_weigh.bits.hw_tq3;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_hw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_set_hw_tx_weight(struct net_device *dev, char *weight)
-+{
-+	GMAC_TX_WCR0_T	hw_weigh;
-+    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
-+
-+	hw_weigh.bits32 = 0;
-+	hw_weigh.bits.hw_tq0 = weight[0];
-+   	hw_weigh.bits.hw_tq1 = weight[1];
-+   	hw_weigh.bits.hw_tq2 = weight[2];
-+   	hw_weigh.bits.hw_tq3 = weight[3];
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_start_tx_dma
-+*----------------------------------------------------------------------*/
-+int mac_start_tx_dma(int mac)
-+{
-+	GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.td_enable = 1;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	if (mac == 0)
-+    	gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+	else
-+    	gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+	return	1;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_stop_tx_dma
-+*----------------------------------------------------------------------*/
-+int mac_stop_tx_dma(int mac)
-+{
-+	GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.td_enable = 0;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	if (mac == 0)
-+    	gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+	else
-+    	gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+	return	1;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_read_reg(int mac, unsigned int offset)
-+*----------------------------------------------------------------------*/
-+unsigned int mac_read_reg(int mac, unsigned int offset)
-+{
-+	switch (mac)
-+	{
-+		case 0:
-+			return gmac_read_reg(TOE_GMAC0_BASE, offset);
-+		case 1:
-+			return gmac_read_reg(TOE_GMAC1_BASE, offset);
-+		default:
-+			return 0;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_write_reg
-+*----------------------------------------------------------------------*/
-+void mac_write_reg(int mac, unsigned int offset, unsigned data)
-+{
-+	switch (mac)
-+	{
-+		case 0:
-+			gmac_write_reg(GMAC0_BASE, offset, data, 0xffffffff);
-+			break;
-+		case 1:
-+			gmac_write_reg(GMAC1_BASE, offset, data, 0xffffffff);
-+			break;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_read_dma_reg(int mac, unsigned int offset)
-+*----------------------------------------------------------------------*/
-+u32 mac_read_dma_reg(int mac, unsigned int offset)
-+{
-+	switch (mac)
-+	{
-+		case 0:
-+			return gmac_read_reg(TOE_GMAC0_DMA_BASE, offset);
-+		case 1:
-+			return gmac_read_reg(TOE_GMAC1_DMA_BASE, offset);
-+		default:
-+			return 0;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_write_dma_reg
-+*----------------------------------------------------------------------*/
-+void mac_write_dma_reg(int mac, unsigned int offset, u32 data)
-+{
-+	switch (mac)
-+	{
-+		case 0:
-+			gmac_write_reg(TOE_GMAC0_DMA_BASE, offset, data, 0xffffffff);
-+			break;
-+		case 1:
-+			gmac_write_reg(TOE_GMAC1_DMA_BASE, offset, data, 0xffffffff);
-+			break;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* ether_crc
-+*----------------------------------------------------------------------*/
-+static unsigned const ethernet_polynomial = 0x04c11db7U;
-+static unsigned int ether_crc (int length, unsigned char *data)
-+{
-+	int crc = -1;
-+	unsigned int i;
-+	unsigned int crc_val=0;
-+
-+	while (--length >= 0) {
-+		unsigned char current_octet = *data++;
-+		int bit;
-+		for (bit = 0; bit < 8; bit++, current_octet >>= 1)
-+			crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ?
-+			     ethernet_polynomial : 0);
-+	}
-+	crc = ~crc;
-+	for (i=0;i<32;i++)
-+	{
-+		crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i));
-+	}
-+	return crc_val;
-+}
-+
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rx_mode
-+*----------------------------------------------------------------------*/
-+void mac_set_rx_mode(int pid, unsigned int data)
-+{
-+	unsigned int	base;
-+
-+	base = (pid == 0) ? GMAC0_BASE : GMAC1_BASE;
-+
-+    gmac_write_reg(base, GMAC_RX_FLTR, data, 0x0000001f);
-+    return;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* gmac_open
-+*----------------------------------------------------------------------*/
-+
-+static int gmac_open (struct net_device *dev)
-+{
-+	GMAC_INFO_T  *tp = (GMAC_INFO_T *)dev->priv;
-+	int    					retval;
-+	TOE_INFO_T				*toe;
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+    /* hook ISR */
-+	retval = request_irq (dev->irq, toe_gmac_interrupt, IRQF_DISABLED, dev->name, dev);
-+	if (retval)
-+		return retval;
-+
-+	toe_init_gmac(dev);
-+
-+	if(!FLAG_SWITCH)
-+	{
-+    	init_waitqueue_head (&tp->thr_wait);
-+    	init_completion(&tp->thr_exited);
-+
-+    	tp->time_to_die = 0;
-+    	tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES);
-+    	if (tp->thr_pid < 0)
-+    	{
-+    		printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name);
-+    	}
-+    }
-+
-+	tp->operation = 1;
-+
-+   	netif_start_queue (dev);
-+
-+	return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_close
-+*----------------------------------------------------------------------*/
-+static int gmac_close(struct net_device *dev)
-+{
-+    TOE_INFO_T			*toe;
-+// 	GMAC_RXDESC_T		*sw_desc_ptr,*desc_ptr;
-+// 	unsigned int		buf_ptr;
-+	GMAC_INFO_T 	*tp = dev->priv;
-+	unsigned int		ret;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+	tp->operation = 0;
-+
-+    netif_stop_queue(dev);
-+    mdelay(20);
-+
-+    /* stop tx/rx packet */
-+    toe_gmac_disable_tx_rx(dev);
-+    mdelay(20);
-+
-+    /* stop the chip's Tx and Rx DMA processes */
-+	toe_gmac_hw_stop(dev);
-+
-+	toe_gmac_disable_interrupt(tp->irq);
-+
-+    /* disable interrupts by clearing the interrupt mask */
-+    synchronize_irq();
-+    free_irq(dev->irq,dev);
-+
-+//	DMA_MFREE(sw_desc_ptr, (TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->sw_freeq_desc_base_dma);
-+//	DMA_MFREE(desc_ptr, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->hw_freeq_desc_base_dma);
-+//	DMA_MFREE(buf_ptr, TOE_HW_FREEQ_DESC_NUM) * HW_RX_BUF_SIZE),(dma_addr_t *)&toe->hwfq_buf_base_dma);
-+//	DMA_MFREE(toe->gmac[0].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[1].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[0].hwtxq_desc_base_dma , TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[1].hwtxq_desc_base_dma , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[0].default_desc_base_dma ,TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[1].default_desc_base_dma , TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
-+//	DMA_MFREE(toe->intr_desc_base_dma , TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->intr_desc_base_dma);
-+//	DMA_MFREE(toe->intr_buf_base_dma , TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T),(dma_addr_t *)&toe->intr_buf_base_dma);
-+
-+	if(!FLAG_SWITCH)
-+	{
-+    	if (tp->thr_pid >= 0)
-+    	{
-+		    tp->time_to_die = 1;
-+    		wmb();
-+    		ret = kill_proc (tp->thr_pid, SIGTERM, 1);
-+    		if (ret)
-+    		{
-+    			printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
-+    			return ret;
-+    		}
-+//    		wait_for_completion (&tp->thr_exited);
-+    	}
-+    }
-+
-+    return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_fill_free_q
-+* allocate buffers for free queue.
-+*----------------------------------------------------------------------*/
-+static inline void toe_gmac_fill_free_q(void)
-+{
-+	struct sk_buff	*skb;
-+	volatile DMA_RWPTR_T	fq_rwptr;
-+	volatile GMAC_RXDESC_T	*fq_desc;
-+	unsigned long	flags;
-+	// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
-+
-+	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	spin_lock_irqsave(&gmac_fq_lock, flags);
-+	//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-+	//				TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-+	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-+					TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-+		if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
-+			printk("%s::skb allocation fail!\n", __func__);
-+			//while(1);
-+			break;
-+		}
-+		REG32(skb->data) = (unsigned int)skb;
-+		skb_reserve(skb, SKB_RESERVE_BYTES);
-+		// fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+		fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-+			TOE_SW_FREEQ_DESC_NUM);
-+		fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
-+		fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+		toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+	}
-+	spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+}
-+// EXPORT_SYMBOL(toe_gmac_fill_free_q);
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_interrupt
-+*----------------------------------------------------------------------*/
-+static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance)
-+{
-+	struct net_device   *dev = (struct net_device *)dev_instance;
-+	TOE_INFO_T			*toe;
-+	GMAC_INFO_T 		*tp = (GMAC_INFO_T *)dev->priv;
-+	unsigned int		status0;
-+	unsigned int		status1;
-+	unsigned int		status2;
-+	unsigned int		status3;
-+	unsigned int		status4;
-+
-+//	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+//	handle NAPI
-+#ifdef CONFIG_SL_NAPI
-+if (storlink_ctl.pauseoff == 1)
-+{
-+/* disable GMAC interrupt */
-+    //toe_gmac_disable_interrupt(tp->irq);
-+
-+//	isPtr->interrupts++;
-+	/* read Interrupt status */
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+	// prompt warning if status bit ON but not enabled
-+#if 0
-+	if (status0 & ~tp->intr0_enabled)
-+		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
-+				status0, tp->intr0_enabled);
-+	if (status1 & ~tp->intr1_enabled)
-+		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
-+				status1, tp->intr1_enabled);
-+	if (status2 & ~tp->intr2_enabled)
-+		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
-+				status2, tp->intr2_enabled);
-+	if (status3 & ~tp->intr3_enabled)
-+		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
-+				status3, tp->intr3_enabled);
-+	if (status4 & ~tp->intr4_enabled)
-+		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
-+				status4, tp->intr4_enabled);
-+#endif
-+
-+	if (status0)
-+		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
-+	if (status1)
-+		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
-+	if (status2)
-+		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
-+	if (status3)
-+		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
-+	if (status4)
-+		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+#if 0
-+	/* handle freeq interrupt first */
-+	if (status4 & tp->intr4_enabled) {
-+		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-+		{
-+			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+
-+			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
-+				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
-+			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
-+				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
-+			printk("\nfreeq int\n");
-+			toe_gmac_fill_free_q();
-+			tp->sw_fq_empty_cnt++;
-+
-+		}
-+	}
-+#endif
-+	// Interrupt Status 1
-+	if (status1 & tp->intr1_enabled)
-+	{
-+		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
-+		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-+		// Handle GMAC 0/1 HW Tx queue 0-3 EOF events
-+		// Only count
-+		// TOE, Classification, and default queues interrupts are handled by ISR
-+		// because they should pass packets to upper layer
-+		if (tp->port_id == 0)
-+		{
-+			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-+			{
-+				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
-+					tp->hwtxq[3].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
-+					tp->hwtxq[2].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
-+					tp->hwtxq[1].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
-+					tp->hwtxq[0].eof_cnt++;
-+			}
-+				if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-+				{
-+					if (likely(netif_rx_schedule_prep(dev)))
-+        			{
-+        				unsigned int data32;
-+        				// disable GMAC-0 rx interrupt
-+        				// class-Q & TOE-Q are implemented in future
-+        				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+        				//data32 &= ~DEFAULT_Q0_INT_BIT;
-+						//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+						//printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
-+						writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-+						//tp->total_q_cnt_napi=0;
-+						//rx_time = jiffies;
-+						//rx_old_bytes = isPtr->rx_bytes;
-+            			__netif_rx_schedule(dev);
-+        			}
-+			}
-+		}
-+		else if (tp->port_id == 1)
-+		{
-+			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-+			{
-+				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
-+					tp->hwtxq[3].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
-+					tp->hwtxq[2].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
-+					tp->hwtxq[1].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
-+					tp->hwtxq[0].eof_cnt++;
-+			}
-+
-+			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-+			{
-+				if (likely(netif_rx_schedule_prep(dev)))
-+        		{
-+        			unsigned int data32;
-+         			// disable GMAC-0 rx interrupt
-+        			// class-Q & TOE-Q are implemented in future
-+        			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+        			//data32 &= ~DEFAULT_Q1_INT_BIT;
-+					//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					//printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
-+					writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					//tp->total_q_cnt_napi=0;
-+					//rx_time = jiffies;
-+					//rx_old_bytes = isPtr->rx_bytes;
-+           			__netif_rx_schedule(dev);
-+        		}
-+			}
-+		}
-+	}
-+
-+	// Interrupt Status 0
-+	if (status0 & tp->intr0_enabled)
-+	{
-+		#define ERR_INTR_BITS	(GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |	\
-+								 GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |	\
-+								 GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |	\
-+								 GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
-+
-+		if (status0 &  ERR_INTR_BITS)
-+		{
-+			if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
-+			{
-+				tp->txDerr_cnt[0]++;
-+				printk("GMAC0 TX AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
-+			{
-+				tp->txPerr_cnt[0]++;
-+				printk("GMAC0 Tx Descriptor Protocol Error!\n");
-+			}
-+			if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
-+			{
-+				tp->txDerr_cnt[1]++;
-+				printk("GMAC1 Tx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
-+			{
-+				tp->txPerr_cnt[1]++;
-+				printk("GMAC1 Tx Descriptor Protocol Error!\n");
-+			}
-+
-+			if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
-+			{
-+				tp->RxDerr_cnt[0]++;
-+				printk("GMAC0 Rx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
-+			{
-+				tp->RxPerr_cnt[0]++;
-+				printk("GMAC0 Rx Descriptor Protocol Error!\n");
-+			}
-+			if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
-+			{
-+				tp->RxDerr_cnt[1]++;
-+				printk("GMAC1 Rx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
-+			{
-+				tp->RxPerr_cnt[1]++;
-+				printk("GMAC1 Rx Descriptor Protocol Error!\n");
-+			}
-+		}
-+
-+#ifndef	GMAX_TX_INTR_DISABLED
-+		if (tp->port_id == 1 &&	netif_running(dev) &&
-+			(((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
-+			||
-+			((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
-+		{
-+			toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
-+		}
-+
-+		if (tp->port_id == 0 &&	netif_running(dev) &&
-+			(((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
-+			||
-+			((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
-+		{
-+			toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-+		}
-+#endif
-+	}
-+	// Interrupt Status 4
-+	if (status4 & tp->intr4_enabled)
-+	{
-+		#define G1_INTR4_BITS		(0xff000000)
-+		#define G0_INTR4_BITS		(0x00ff0000)
-+
-+		if (tp->port_id == 0)
-+		{
-+			if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
-+			{
-+				if (status4 & GMAC0_RESERVED_INT_BIT)
-+					printk("GMAC0_RESERVED_INT_BIT is ON\n");
-+				if (status4 & GMAC0_MIB_INT_BIT)
-+					tp->mib_full_cnt++;
-+				if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
-+					tp->rx_pause_on_cnt++;
-+				if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
-+					tp->tx_pause_on_cnt++;
-+				if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
-+					tp->rx_pause_off_cnt++;
-+				if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
-+					tp->rx_pause_off_cnt++;
-+				if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-+					tp->rx_overrun_cnt++;
-+				if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
-+					tp->status_changed_cnt++;
-+			}
-+		}
-+		else if (tp->port_id == 1)
-+		{
-+			if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
-+			{
-+				if (status4 & GMAC1_RESERVED_INT_BIT)
-+					printk("GMAC1_RESERVED_INT_BIT is ON\n");
-+				if (status4 & GMAC1_MIB_INT_BIT)
-+					tp->mib_full_cnt++;
-+				if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
-+				{
-+					printk("Gmac pause on\n");
-+					tp->rx_pause_on_cnt++;
-+				}
-+				if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
-+				{
-+					printk("Gmac pause on\n");
-+					tp->tx_pause_on_cnt++;
-+				}
-+				if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
-+				{
-+					printk("Gmac pause off\n");
-+					tp->rx_pause_off_cnt++;
-+				}
-+				if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
-+				{
-+					printk("Gmac pause off\n");
-+					tp->rx_pause_off_cnt++;
-+				}
-+				if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
-+				{
-+					//printk("Gmac Rx Overrun \n");
-+					tp->rx_overrun_cnt++;
-+				}
-+				if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
-+					tp->status_changed_cnt++;
-+			}
-+		}
-+	}
-+
-+	//toe_gmac_enable_interrupt(tp->irq);
-+#ifdef IxscriptMate_1518
-+	if (storlink_ctl.pauseoff == 1)
-+	{
-+		GMAC_CONFIG0_T config0;
-+		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 0;
-+		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 0;
-+		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+	}
-+#endif
-+//	 enable_irq(gmac_irq[dev_index]);
-+	//printk("gmac_interrupt complete!\n\n");
-+//	return IRQ_RETVAL(handled);
-+	return	IRQ_RETVAL(1);
-+}
-+else
-+{
-+#endif	//endif NAPI
-+
-+
-+	/* disable GMAC interrupt */
-+    toe_gmac_disable_interrupt(tp->irq);
-+
-+//	isPtr->interrupts++;
-+	/* read Interrupt status */
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+	// prompt warning if status bit ON but not enabled
-+#if 0
-+	if (status0 & ~tp->intr0_enabled)
-+		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
-+				status0, tp->intr0_enabled);
-+	if (status1 & ~tp->intr1_enabled)
-+		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
-+				status1, tp->intr1_enabled);
-+	if (status2 & ~tp->intr2_enabled)
-+		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
-+				status2, tp->intr2_enabled);
-+	if (status3 & ~tp->intr3_enabled)
-+		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
-+				status3, tp->intr3_enabled);
-+	if (status4 & ~tp->intr4_enabled)
-+		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
-+				status4, tp->intr4_enabled);
-+#endif
-+#define	INTERRUPT_SELECT			1
-+	if (status0)
-+		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
-+	if (status1)
-+		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
-+	if (status2)
-+		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
-+	if (status3)
-+		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
-+	if (status4)
-+		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+	/* handle freeq interrupt first */
-+	if (status4 & tp->intr4_enabled) {
-+		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-+		{
-+			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+
-+			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
-+			//	SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
-+				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
-+			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
-+				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
-+			printk("\nfreeq int\n");
-+			toe_gmac_fill_free_q();
-+			tp->sw_fq_empty_cnt++;
-+
-+			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-+				SWFQ_EMPTY_INT_BIT);
-+		}
-+	}
-+
-+	// Interrupt Status 1
-+	if (status1 & tp->intr1_enabled)
-+	{
-+		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
-+		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-+		// Handle GMAC 0/1 HW Tx queue 0-3 EOF events
-+		// Only count
-+		// TOE, Classification, and default queues interrupts are handled by ISR
-+		// because they should pass packets to upper layer
-+		if (tp->port_id == 0)
-+		{
-+#ifndef	INTERRUPT_SELECT
-+			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-+			{
-+				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
-+					tp->hwtxq[3].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
-+					tp->hwtxq[2].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
-+					tp->hwtxq[1].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
-+					tp->hwtxq[0].eof_cnt++;
-+#endif	//INTERRUPT_SELECT
-+#ifndef	INTERRUPT_SELECT
-+			}
-+#endif	//INTERRUPT_SELECT
-+			if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-+			{
-+				tp->default_q_intr_cnt++;
-+				toe_gmac_handle_default_rxq(dev, tp);
-+			}
-+#ifdef CONFIG_SL351x_RXTOE
-+			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
-+			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
-+				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
-+				toe_gmac_handle_toeq(dev, tp, status1);
-+				//toe_gmac_handle_toeq(dev, toe, tp, status1);
-+			}
-+#endif
-+		}
-+		else if (tp->port_id == 1)
-+		{
-+#ifndef	INTERRUPT_SELECT
-+			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-+			{
-+				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
-+					tp->hwtxq[3].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
-+					tp->hwtxq[2].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
-+					tp->hwtxq[1].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
-+					tp->hwtxq[0].eof_cnt++;
-+#endif	//INTERRUPT_SELECT
-+#ifndef	INTERRUPT_SELECT
-+			}
-+#endif	//INTERRUPT_SELECT
-+			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-+			{
-+				tp->default_q_intr_cnt++;
-+				toe_gmac_handle_default_rxq(dev, tp);
-+			}
-+#ifdef CONFIG_SL351x_RXTOE
-+			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
-+			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
-+				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
-+				toe_gmac_handle_toeq(dev, tp, status1);
-+				//toe_gmac_handle_toeq(dev, toe, tp, status1);
-+			}
-+#endif
-+		}
-+	}
-+
-+
-+	// Interrupt Status 0
-+	if (status0 & tp->intr0_enabled)
-+	{
-+
-+		#define ERR_INTR_BITS	(GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |	\
-+								 GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |	\
-+								 GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |	\
-+								 GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
-+#ifndef	INTERRUPT_SELECT
-+		if (status0 &  ERR_INTR_BITS)
-+		{
-+			if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
-+			{
-+				tp->txDerr_cnt[0]++;
-+				printk("GMAC0 TX AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
-+			{
-+				tp->txPerr_cnt[0]++;
-+				printk("GMAC0 Tx Descriptor Protocol Error!\n");
-+			}
-+			if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
-+			{
-+				tp->txDerr_cnt[1]++;
-+				printk("GMAC1 Tx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
-+			{
-+				tp->txPerr_cnt[1]++;
-+				printk("GMAC1 Tx Descriptor Protocol Error!\n");
-+			}
-+
-+			if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
-+			{
-+				tp->RxDerr_cnt[0]++;
-+				printk("GMAC0 Rx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
-+			{
-+				tp->RxPerr_cnt[0]++;
-+				printk("GMAC0 Rx Descriptor Protocol Error!\n");
-+			}
-+			if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
-+			{
-+				tp->RxDerr_cnt[1]++;
-+				printk("GMAC1 Rx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
-+			{
-+				tp->RxPerr_cnt[1]++;
-+				printk("GMAC1 Rx Descriptor Protocol Error!\n");
-+			}
-+		}
-+#endif	//INTERRUPT_SELECT
-+#ifndef	GMAX_TX_INTR_DISABLED
-+		if (tp->port_id == 1 &&	netif_running(dev) &&
-+			(((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
-+			||
-+			((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
-+		{
-+			toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
-+		}
-+
-+		if (tp->port_id == 0 &&	netif_running(dev) &&
-+			(((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
-+			||
-+			((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
-+		{
-+			toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-+		}
-+#endif
-+		// clear enabled status bits
-+	}
-+	// Interrupt Status 4
-+#ifndef	INTERRUPT_SELECT
-+	if (status4 & tp->intr4_enabled)
-+	{
-+		#define G1_INTR4_BITS		(0xff000000)
-+		#define G0_INTR4_BITS		(0x00ff0000)
-+
-+		if (tp->port_id == 0)
-+		{
-+			if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
-+			{
-+				if (status4 & GMAC0_RESERVED_INT_BIT)
-+					printk("GMAC0_RESERVED_INT_BIT is ON\n");
-+				if (status4 & GMAC0_MIB_INT_BIT)
-+					tp->mib_full_cnt++;
-+				if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
-+					tp->rx_pause_on_cnt++;
-+				if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
-+					tp->tx_pause_on_cnt++;
-+				if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
-+					tp->rx_pause_off_cnt++;
-+				if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
-+					tp->rx_pause_off_cnt++;
-+				if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-+					tp->rx_overrun_cnt++;
-+				if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
-+					tp->status_changed_cnt++;
-+			}
-+		}
-+		else if (tp->port_id == 1)
-+		{
-+			if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
-+			{
-+				if (status4 & GMAC1_RESERVED_INT_BIT)
-+					printk("GMAC1_RESERVED_INT_BIT is ON\n");
-+				if (status4 & GMAC1_MIB_INT_BIT)
-+					tp->mib_full_cnt++;
-+				if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
-+				{
-+					//printk("Gmac pause on\n");
-+					tp->rx_pause_on_cnt++;
-+				}
-+				if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
-+				{
-+					//printk("Gmac pause on\n");
-+					tp->tx_pause_on_cnt++;
-+				}
-+				if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
-+				{
-+					//printk("Gmac pause off\n");
-+					tp->rx_pause_off_cnt++;
-+				}
-+				if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
-+				{
-+					//printk("Gmac pause off\n");
-+					tp->rx_pause_off_cnt++;
-+				}
-+				if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
-+				{
-+					//printk("Gmac Rx Overrun \n");
-+					tp->rx_overrun_cnt++;
-+				}
-+				if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
-+					tp->status_changed_cnt++;
-+			}
-+		}
-+#if 0
-+		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-+		{
-+			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+//			mac_stop_rxdma(tp->sc);
-+			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+				tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+
-+			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
-+				SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+			toe_gmac_fill_free_q();
-+			tp->sw_fq_empty_cnt++;
-+
-+			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-+				SWFQ_EMPTY_INT_BIT);
-+//#if 0
-+/*			if (netif_running(dev))
-+				toe_gmac_handle_default_rxq(dev, tp);
-+			printk("SWFQ_EMPTY_INT_BIT is ON!\n");	// should not be happened */
-+//#endif
-+		}
-+#endif
-+	}
-+#endif	//INTERRUPT_SELECT
-+	toe_gmac_enable_interrupt(tp->irq);
-+//enable gmac rx function when do RFC 2544
-+#ifdef IxscriptMate_1518
-+	if (storlink_ctl.pauseoff == 1)
-+	{
-+		GMAC_CONFIG0_T config0;
-+		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 0;
-+		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 0;
-+		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+	}
-+#endif
-+	//printk("gmac_interrupt complete!\n\n");
-+//	return IRQ_RETVAL(handled);
-+	return	IRQ_RETVAL(1);
-+#ifdef CONFIG_SL_NAPI
-+}
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_handle_default_rxq
-+*	(1) Get rx Buffer for default Rx queue
-+*	(2) notify or call upper-routine to handle it
-+*	(3) get a new buffer and insert it into SW free queue
-+*	(4) Note: The SW free queue Read-Write Pointer should be locked when accessing
-+*----------------------------------------------------------------------*/
-+//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
-+static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
-+{
-+	TOE_INFO_T			*toe;
-+    GMAC_RXDESC_T   	*curr_desc;
-+	struct sk_buff 		*skb;
-+    DMA_RWPTR_T			rwptr;
-+	unsigned int 		pkt_size;
-+	int					max_cnt;
-+	unsigned int        desc_count;
-+	unsigned int        good_frame, chksum_status, rx_status;
-+	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+
-+//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
-+#ifdef IxscriptMate_1518
-+	if (storlink_ctl.pauseoff == 1)
-+	{
-+		GMAC_CONFIG0_T config0;
-+		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 1;
-+		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 1;
-+		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+	}
-+#endif
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+#if 0
-+	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
-+	{
-+		mac_stop_txdma((struct net_device *)tp->dev);
-+		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
-+				rwptr.bits32, tp->rx_rwptr.bits.rptr);
-+		while(1);
-+	}
-+#endif
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	max_cnt = DEFAULT_RXQ_MAX_CNT;
-+	while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
-+//	while (rwptr.bits.rptr != rwptr.bits.wptr)
-+	{
-+//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
-+#ifdef IxscriptMate_1518
-+    	if (storlink_ctl.pauseoff == 1)
-+		{
-+			if (pkt_size != 1514)
-+			{
-+						GMAC_CONFIG0_T config0;
-+						config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+						config0.bits.dis_rx = 0;
-+						writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+						config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+						config0.bits.dis_rx = 0;
-+						writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+			}
-+		}
-+#endif
-+    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+//		consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
-+		tp->default_q_cnt++;
-+    	tp->rx_curr_desc = (unsigned int)curr_desc;
-+    	rx_status = curr_desc->word0.bits.status;
-+    	chksum_status = curr_desc->word0.bits.chksum_status;
-+    	tp->rx_status_cnt[rx_status]++;
-+    	tp->rx_chksum_cnt[chksum_status]++;
-+        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
-+		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
-+		good_frame=1;
-+		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
-+			|| (pkt_size < 60)
-+		    || (chksum_status & 0x4)
-+			|| rx_status)
-+		{
-+			good_frame = 0;
-+			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-+				printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
-+				printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+			if (rx_status)
-+			{
-+				if (rx_status == 4 || rx_status == 7)
-+					isPtr->rx_crc_errors++;
-+//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
-+			}
-+#ifdef SL351x_GMAC_WORKAROUND
-+			else if (pkt_size < 60)
-+			{
-+				if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
-+					tp->short_frames_cnt++;
-+				if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+				{
-+					GMAC_CONFIG0_T config0;
-+					config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+					config0.bits.dis_rx = 1;
-+					writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+					config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+					config0.bits.dis_rx = 1;
-+					writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+				}
-+			}
-+#endif
-+//			if (chksum_status)
-+//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+		}
-+		if (good_frame)
-+		{
-+			if (curr_desc->word0.bits.drop)
-+				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
-+//			if (chksum_status)
-+//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+
-+	    	/* get frame information from the first descriptor of the frame */
-+#ifdef SL351x_GMAC_WORKAROUND
-+			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+			{
-+				GMAC_CONFIG0_T config0;
-+				config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				config0.bits.dis_rx = 0;
-+				writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+				config0.bits.dis_rx = 0;
-+				writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+			}
-+			tp->short_frames_cnt = 0;
-+#endif
-+			isPtr->rx_packets++;
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
-+			if (!skb)
-+			{
-+				printk("Fatal Error!!skb==NULL\n");
-+				goto next_rx;
-+			}
-+			tp->curr_rx_skb = skb;
-+			// consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
-+
-+	//		curr_desc->word2.buf_adr = 0;
-+
-+			skb_reserve (skb, RX_INSERT_BYTES);	/* 16 byte align the IP fields. */
-+			skb_put(skb, pkt_size);
-+			skb->dev = dev;
-+			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
-+			{
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+				{
-+					struct iphdr	*ip_hdr;
-+					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+					sl351x_nat_input(skb,
-+									tp->port_id,
-+									(void *)curr_desc->word3.bits.l3_offset,
-+								  	(void *)curr_desc->word3.bits.l4_offset);
-+				}
-+#endif
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+#if 0
-+#ifdef CONFIG_SL351x_RXTOE
-+				if (storlink_ctl.rx_max_pktsize) {
-+					struct iphdr	*ip_hdr;
-+					struct tcphdr	*tcp_hdr;
-+					int ip_hdrlen;
-+
-+ 					ip_hdr = (struct iphdr*)&(skb->data[0]);
-+					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
-+					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
-+						ip_hdrlen = ip_hdr->ihl << 2;
-+						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-+						if (tcp_hdr->syn) {
-+							struct toe_conn* connection = init_toeq(ip_hdr->version,
-+									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
-+							TCP_SKB_CB(skb)->connection = connection;
-+							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
-+							//		printk("%s::skb data %x, conn %x, mode %x\n",
-+							//			__func__, skb->data, connection, connection->mode);
-+						}
-+					}
-+				}
-+#endif
-+#endif
-+			}
-+			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
-+			{
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+				{
-+					struct iphdr		*ip_hdr;
-+					//struct tcphdr		*tcp_hdr;
-+					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+					//tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
-+					if (ip_hdr->protocol == IPPROTO_UDP)
-+					{
-+						sl351x_nat_input(skb,
-+										tp->port_id,
-+										(void *)curr_desc->word3.bits.l3_offset,
-+								  		(void *)curr_desc->word3.bits.l4_offset);
-+					}
-+					else if (ip_hdr->protocol == IPPROTO_GRE)
-+					{
-+						sl351x_nat_input(skb,
-+									tp->port_id,
-+									(void *)curr_desc->word3.bits.l3_offset,
-+								  	(void *)curr_desc->word3.bits.l4_offset);
-+					}
-+				}
-+#endif
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+			}
-+			else
-+			{
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+			}
-+
-+			netif_rx(skb);  /* socket rx */
-+			dev->last_rx = jiffies;
-+
-+			isPtr->rx_bytes += pkt_size;
-+
-+        }
-+
-+next_rx:
-+		// advance one for Rx default Q 0/1
-+		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+     	tp->rx_rwptr.bits32 = rwptr.bits32;
-+
-+		toe_gmac_fill_free_q();
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_phy_vendor
-+*----------------------------------------------------------------------*/
-+static unsigned int gmac_get_phy_vendor(int phy_addr)
-+{
-+    unsigned int	reg_val;
-+    reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
-+    return reg_val;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_set_phy_status
-+*----------------------------------------------------------------------*/
-+void gmac_set_phy_status(struct net_device *dev)
-+{
-+	GMAC_INFO_T *tp = dev->priv;
-+	GMAC_STATUS_T   status;
-+	unsigned int    reg_val, ability,wan_port_id;
-+	unsigned int    i = 0;
-+
-+#ifdef VITESSE_G5SWITCH
-+	if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
-+#if 0
-+		rcv_mask = SPI_read(2,0,0x10);			// Receive mask
-+		rcv_mask |= 0x4F;
-+		for(i=0;i<4;i++){
-+			reg_val = BIT(26)|(i<<21)|(10<<16);
-+			SPI_write(3,0,1,reg_val);
-+			msleep(10);
-+			reg_val = SPI_read(3,0,2);
-+			if(reg_val & 0x0c00){
-+				printk("Port%d:Giga mode\n",i);
-+				SPI_write(1,i,0x00,0x300701B1);
-+				SPI_write(1,i,0x00,0x10070181);
-+				switch_pre_link[i]=LINK_UP;
-+				switch_pre_speed[i]=GMAC_SPEED_1000;
-+			}
-+			else{
-+				reg_val = BIT(26)|(i<<21)|(5<<16);
-+				SPI_write(3,0,1,reg_val);
-+				msleep(10);
-+				ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
-+				if ((ability & 0x0C)) /* 100M full duplex */
-+				{
-+					SPI_write(1,i,0x00,0x30050472);
-+					SPI_write(1,i,0x00,0x10050442);
-+					printk("Port%d:100M\n",i);
-+					switch_pre_link[i]=LINK_UP;
-+				switch_pre_speed[i]=GMAC_SPEED_100;
-+				}
-+				else if((ability & 0x03)) /* 10M full duplex */
-+				{
-+					SPI_write(1,i,0x00,0x30050473);
-+					SPI_write(1,i,0x00,0x10050443);
-+					printk("Port%d:10M\n",i);
-+					switch_pre_link[i]=LINK_UP;
-+					switch_pre_speed[i]=GMAC_SPEED_10;
-+				}
-+				else{
-+					SPI_write(1,i,0x00,BIT(16));			// disable RX
-+					SPI_write(5,0,0x0E,BIT(i));			// dicard packet
-+					while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
-+						msleep(1);
-+
-+					SPI_write(1,i,0x00,0x20000030);			// PORT_RST
-+					switch_pre_link[i]=LINK_DOWN;
-+					switch_pre_speed[i]=GMAC_SPEED_10;
-+					rcv_mask &= ~BIT(i);
-+					SPI_write(2,0,0x10,rcv_mask);			// Disable Receive
-+				}
-+			}
-+		}
-+#endif
-+		gmac_get_switch_status(dev);
-+		gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
-+//		SPI_write(2,0,0x10,rcv_mask);			// Enable Receive
-+		return ;
-+	}
-+#endif
-+
-+	reg_val = gmac_get_phy_vendor(tp->phy_addr);
-+	printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
-+
-+	switch (tp->phy_mode)
-+	{
-+		case GMAC_PHY_GMII:
-+		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+		#ifdef CONFIG_SL3516_ASIC
-+		mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
-+		#else
-+		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
-+		#endif
-+		break;
-+		case GMAC_PHY_RGMII_100:
-+		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
-+		break;
-+		case GMAC_PHY_RGMII_1000:
-+		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+		#ifdef CONFIG_SL3516_ASIC
-+		mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
-+		#else
-+		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
-+		#endif
-+		break;
-+		case GMAC_PHY_MII:
-+		default:
-+		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
-+		break;
-+	}
-+
-+	mii_write(tp->phy_addr,0x18,0x0041);	// Phy active led
-+	if (tp->auto_nego_cfg)
-+	{
-+		reg_val = 0x1200 | (1 << 15);
-+		mii_write(tp->phy_addr,0x00,reg_val); /* Enable and Restart Auto-Negotiation */
-+		mdelay(500);
-+		reg_val &= ~(1 << 15);
-+		mii_write(tp->phy_addr, 0x00, reg_val);
-+	}
-+	else
-+	{
-+		reg_val = 0;
-+		reg_val |= (tp->full_duplex_cfg) ? (1 << 8) : 0;
-+		reg_val |= (tp->speed_cfg == GMAC_SPEED_1000) ? (1 << 6) : 0;
-+		reg_val |= (tp->speed_cfg == GMAC_SPEED_100) ? (1 << 13) : 0;
-+		mii_write(tp->phy_addr, 0x00, reg_val);
-+		mdelay(100);
-+
-+		reg_val |= (1 << 15);	// Reset PHY;
-+		mii_write(tp->phy_addr, 0x00, reg_val);
-+	}
-+
-+	status.bits32 = 0;
-+	/* set PHY operation mode */
-+	status.bits.mii_rmii = tp->phy_mode;
-+	status.bits.reserved = 1;
-+	mdelay(100);
-+	while (((reg_val=mii_read(tp->phy_addr,0x01)) & 0x00000004)!=0x04)
-+	{
-+		msleep(100);
-+		i++;
-+		if (i > 30)
-+		break;
-+	}
-+	if (i>30)
-+	{
-+		tp->pre_phy_status = LINK_DOWN;
-+		status.bits.link = LINK_DOWN;
-+		//		clear_bit(__LINK_STATE_START, &dev->state);
-+		printk("Link Down (0x%04x) ", reg_val);
-+		if(Giga_switch == 1)
-+		{
-+				wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ wan_port_id] = 0;
-+#endif
-+		}
-+		else
-+		{
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ tp->port_id] = 0;
-+#endif
-+		}
-+	}
-+	else
-+	{
-+		tp->pre_phy_status = LINK_UP;
-+		status.bits.link = LINK_UP;
-+		//		set_bit(__LINK_STATE_START, &dev->state);
-+		printk("Link Up (0x%04x) ",reg_val);
-+		if(Giga_switch == 1)
-+		{
-+				wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ wan_port_id] = 1;
-+#endif
-+		}
-+		else
-+		{
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ tp->port_id] = 1;
-+#endif
-+		}
-+	}
-+	//    value = mii_read(PHY_ADDR,0x05);
-+
-+	ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
-+
-+	//#ifdef CONFIG_SL3516_ASIC
-+	reg_val = mii_read(tp->phy_addr,10);
-+	printk("MII REG 10 = 0x%x\n",reg_val);
-+
-+	if ((reg_val & 0x0800) == 0x0800)
-+	{
-+		status.bits.duplex = 1;
-+		status.bits.speed = 2;
-+		if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+		status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+
-+		printk(" 1000M/Full \n");
-+	}
-+	else if ((reg_val & 0x0400) == 0x0400)
-+	{
-+		status.bits.duplex = 0;
-+		status.bits.speed = 2;
-+		if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+		status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+
-+		printk(" 1000M/Half \n");
-+	}
-+	//#endif
-+	else
-+	{
-+		#ifdef CONFIG_SL3516_ASIC
-+		if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
-+		status.bits.mii_rmii = GMAC_PHY_RGMII_100;
-+		#endif
-+		printk("MII REG 5 (bit 5:15) = 0x%x\n", ability);
-+		if ((ability & 0x08)==0x08) /* 100M full duplex */
-+		{
-+			status.bits.duplex = 1;
-+			status.bits.speed = 1;
-+			printk(" 100M/Full\n");
-+
-+		}
-+		else if ((ability & 0x04)==0x04) /* 100M half duplex */
-+		{
-+			status.bits.duplex = 0;
-+			status.bits.speed = 1;
-+			printk(" 100M/Half\n");
-+
-+		}
-+		else if ((ability & 0x02)==0x02) /* 10M full duplex */
-+		{
-+			status.bits.duplex = 1;
-+			status.bits.speed = 0;
-+			printk(" 10M/Full\n");
-+
-+		}
-+		else if ((ability & 0x01)==0x01) /* 10M half duplex */
-+		{
-+			status.bits.duplex = 0;
-+			status.bits.speed = 0;
-+			printk(" 10M/Half\n");
-+
-+		}
-+	}
-+	if ((ability & 0x20)==0x20)
-+	{
-+		tp->flow_control_enable = 1;
-+		printk("Flow Control Enable.\n");
-+	}
-+	else
-+	{
-+		tp->flow_control_enable = 0;
-+		printk("Flow Control Disable.\n");
-+	}
-+	tp->full_duplex_status = status.bits.duplex;
-+	tp->speed_status = status.bits.speed;
-+	if (!tp->auto_nego_cfg)
-+	{
-+		status.bits.duplex = tp->full_duplex_cfg;
-+		status.bits.speed = tp->speed_cfg;
-+	}
-+	toe_gmac_disable_tx_rx(dev);
-+	mdelay(10);
-+	gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
-+	toe_gmac_enable_tx_rx(dev);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_phy_thread
-+*----------------------------------------------------------------------*/
-+static int gmac_phy_thread (void *data)
-+{
-+	struct net_device   *dev = data;
-+	GMAC_INFO_T *tp = dev->priv;
-+	unsigned long       timeout;
-+
-+    daemonize("%s", dev->name);
-+	allow_signal(SIGTERM);
-+//	reparent_to_init();
-+//	spin_lock_irq(¤t->sigmask_lock);
-+//	sigemptyset(¤t->blocked);
-+//	recalc_sigpending(current);
-+//	spin_unlock_irq(¤t->sigmask_lock);
-+//	strncpy (current->comm, dev->name, sizeof(current->comm) - 1);
-+//	current->comm[sizeof(current->comm) - 1] = '\0';
-+
-+	while (1)
-+	{
-+	    timeout = next_tick;
-+		do
-+		{
-+			timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
-+		} while (!signal_pending (current) && (timeout > 0));
-+
-+		if (signal_pending (current))
-+		{
-+//			spin_lock_irq(¤t->sigmask_lock);
-+			flush_signals(current);
-+//			spin_unlock_irq(¤t->sigmask_lock);
-+		}
-+
-+		if (tp->time_to_die)
-+			break;
-+
-+		// printk("%s : Polling MAC %d PHY Status...\n",__func__, tp->port_id);
-+		rtnl_lock ();
-+		if (tp->auto_nego_cfg){
-+#ifdef VITESSE_G5SWITCH
-+        		if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1))
-+	        		gmac_get_switch_status(dev);
-+        		else
-+#endif
-+        			gmac_get_phy_status(dev); //temp remove
-+        	}
-+		rtnl_unlock ();
-+	}
-+	complete_and_exit (&tp->thr_exited, 0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_switch_status
-+*----------------------------------------------------------------------*/
-+#ifdef VITESSE_G5SWITCH
-+void gmac_get_switch_status(struct net_device *dev)
-+{
-+	GMAC_INFO_T *tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+	unsigned int	switch_port_id;
-+	int get_link=0;
-+
-+	get_link = Get_Set_port_status();
-+	if(get_link){				// link
-+		if(ever_dwon){
-+			ever_dwon = 0;
-+			toe_gmac_enable_tx_rx(dev);
-+			netif_wake_queue(dev);
-+			set_bit(__LINK_STATE_START, &dev->state);
-+		}
-+	}
-+	else{					// all down
-+		//printk("All link down\n");
-+		ever_dwon=1;
-+		netif_stop_queue(dev);
-+		toe_gmac_disable_tx_rx(dev);
-+		clear_bit(__LINK_STATE_START, &dev->state);
-+	}
-+
-+	if ( tp->port_id == 1 )
-+		switch_port_id = 0;
-+#ifdef CONFIG_SL351x_SYSCTL
-+	if (get_link)
-+	{
-+		storlink_ctl.link[switch_port_id] = 1;
-+	}
-+	else
-+	{
-+		storlink_ctl.link[switch_port_id] = 0;
-+	}
-+	if (storlink_ctl.pauseoff == 1)
-+		{
-+			if (tp->flow_control_enable == 1)
-+			{
-+				config0.bits32 = 0;
-+				config0_mask.bits32 = 0;
-+				config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+				config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+				config0_mask.bits.tx_fc_en = 1;
-+				config0_mask.bits.rx_fc_en = 1;
-+				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+				printk("Disable SWITCH Flow Control...\n");
-+			}
-+				tp->flow_control_enable = 0;
-+		}
-+		else
-+#endif
-+		{
-+			if (tp->flow_control_enable == 0)
-+			{
-+				config0.bits32 = 0;
-+				config0_mask.bits32 = 0;
-+				config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+				config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+				config0_mask.bits.tx_fc_en = 1;
-+				config0_mask.bits.rx_fc_en = 1;
-+				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+				printk("Enable SWITCH Flow Control...\n");
-+			}
-+			tp->flow_control_enable = 1;
-+		}
-+	return ;
-+
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_phy_status
-+*----------------------------------------------------------------------*/
-+void gmac_get_phy_status(struct net_device *dev)
-+{
-+	GMAC_INFO_T *tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+	GMAC_STATUS_T   status, old_status;
-+	unsigned int    reg_val,ability,wan_port_id;
-+
-+	old_status.bits32 = status.bits32 = gmac_read_reg(tp->base_addr, GMAC_STATUS);
-+
-+
-+	/* read PHY status register */
-+	reg_val = mii_read(tp->phy_addr,0x01);
-+	if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
-+	{
-+		ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
-+		/* read PHY Auto-Negotiation Link Partner Ability Register */
-+		#ifdef CONFIG_SL3516_ASIC
-+		reg_val = mii_read(tp->phy_addr,10);
-+		if ((reg_val & 0x0800) == 0x0800)
-+		{
-+			status.bits.duplex = 1;
-+			status.bits.speed = 2;
-+			if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+		}
-+		else if ((reg_val & 0x0400) == 0x0400)
-+		{
-+			status.bits.duplex = 0;
-+			status.bits.speed = 2;
-+			if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+		}
-+		else
-+		#endif
-+		{
-+			#ifdef CONFIG_SL3516_ASIC
-+			if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
-+			status.bits.mii_rmii = GMAC_PHY_RGMII_100;
-+			#endif
-+			if ((ability & 0x08)==0x08) /* 100M full duplex */
-+			{
-+				status.bits.duplex = 1;
-+				status.bits.speed = 1;
-+			}
-+			else if ((ability & 0x04)==0x04) /* 100M half duplex */
-+			{
-+				status.bits.duplex = 0;
-+				status.bits.speed = 1;
-+			}
-+			else if ((ability & 0x02)==0x02) /* 10M full duplex */
-+			{
-+				status.bits.duplex = 1;
-+				status.bits.speed = 0;
-+			}
-+			else if ((ability & 0x01)==0x01) /* 10M half duplex */
-+			{
-+				status.bits.duplex = 0;
-+				status.bits.speed = 0;
-+			}
-+		}
-+		status.bits.link = LINK_UP; /* link up */
-+		if(Giga_switch==1)
-+		{
-+				wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ wan_port_id] = 1;
-+		}
-+		else
-+		{
-+				storlink_ctl.link[ tp->port_id] = 1;
-+#endif
-+		}
-+		if ((ability & 0x20)==0x20)
-+		{
-+			if (tp->flow_control_enable == 0)
-+			{
-+				config0.bits32 = 0;
-+				config0_mask.bits32 = 0;
-+				config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+				config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+				config0_mask.bits.tx_fc_en = 1;
-+				config0_mask.bits.rx_fc_en = 1;
-+				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+				printk("GMAC-%d Flow Control Enable.\n", tp->port_id);
-+			}
-+			tp->flow_control_enable = 1;
-+		}
-+		else
-+		{
-+			if (tp->flow_control_enable == 1)
-+			{
-+				config0.bits32 = 0;
-+				config0_mask.bits32 = 0;
-+				config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+				config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+				config0_mask.bits.tx_fc_en = 1;
-+				config0_mask.bits.rx_fc_en = 1;
-+				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+				printk("GMAC-%d Flow Control Disable.\n", tp->port_id);
-+			}
-+			tp->flow_control_enable = 0;
-+		}
-+
-+		if (tp->pre_phy_status == LINK_DOWN)
-+		{
-+			printk("GMAC-%d LINK_UP......\n",tp->port_id);
-+			tp->pre_phy_status = LINK_UP;
-+		}
-+	}
-+	else
-+	{
-+		status.bits.link = LINK_DOWN; /* link down */
-+		if(Giga_switch == 1)
-+		{
-+				wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ wan_port_id] = 0;
-+		}
-+		else
-+		{
-+				storlink_ctl.link[ tp->port_id] = 0;
-+#endif
-+		}
-+		if (tp->pre_phy_status == LINK_UP)
-+		{
-+			printk("GMAC-%d LINK_Down......\n",tp->port_id);
-+			tp->pre_phy_status = LINK_DOWN;
-+		}
-+	}
-+
-+	tp->full_duplex_status = status.bits.duplex;
-+	tp->speed_status = status.bits.speed;
-+	if (!tp->auto_nego_cfg)
-+	{
-+		status.bits.duplex = tp->full_duplex_cfg;
-+		status.bits.speed = tp->speed_cfg;
-+	}
-+
-+	if (old_status.bits32 != status.bits32)
-+	{
-+		netif_stop_queue(dev);
-+		toe_gmac_disable_tx_rx(dev);
-+		clear_bit(__LINK_STATE_START, &dev->state);
-+		printk("GMAC-%d Change Status Bits 0x%x-->0x%x\n",tp->port_id, old_status.bits32, status.bits32);
-+		mdelay(10); // let GMAC consume packet
-+		gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
-+		if (status.bits.link == LINK_UP)
-+		{
-+			toe_gmac_enable_tx_rx(dev);
-+			netif_wake_queue(dev);
-+			set_bit(__LINK_STATE_START, &dev->state);
-+		}
-+	}
-+}
-+
-+/***************************************/
-+/* define GPIO module base address     */
-+/***************************************/
-+#define GPIO_BASE_ADDR  (IO_ADDRESS(SL2312_GPIO_BASE))
-+#define GPIO_BASE_ADDR1  (IO_ADDRESS(SL2312_GPIO_BASE1))
-+
-+/* define GPIO pin for MDC/MDIO */
-+#ifdef CONFIG_SL3516_ASIC
-+#define H_MDC_PIN           22
-+#define H_MDIO_PIN          21
-+#define G_MDC_PIN           22
-+#define G_MDIO_PIN          21
-+#else
-+#define H_MDC_PIN           3
-+#define H_MDIO_PIN          2
-+#define G_MDC_PIN           0
-+#define G_MDIO_PIN          1
-+#endif
-+
-+//#define GPIO_MDC             0x80000000
-+//#define GPIO_MDIO            0x00400000
-+
-+static unsigned int GPIO_MDC = 0;
-+static unsigned int GPIO_MDIO = 0;
-+static unsigned int GPIO_MDC_PIN = 0;
-+static unsigned int GPIO_MDIO_PIN = 0;
-+
-+// For PHY test definition!!
-+#define LPC_EECK		0x02
-+#define LPC_EDIO		0x04
-+#define LPC_GPIO_SET		3
-+#define LPC_BASE_ADDR		IO_ADDRESS(IT8712_IO_BASE)
-+#define inb_gpio(x)		inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+#define outb_gpio(x, y)		outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+
-+enum GPIO_REG
-+{
-+    GPIO_DATA_OUT   = 0x00,
-+    GPIO_DATA_IN    = 0x04,
-+    GPIO_PIN_DIR    = 0x08,
-+    GPIO_BY_PASS    = 0x0c,
-+    GPIO_DATA_SET   = 0x10,
-+    GPIO_DATA_CLEAR = 0x14,
-+};
-+/***********************/
-+/*    MDC : GPIO[31]   */
-+/*    MDIO: GPIO[22]   */
-+/***********************/
-+
-+/***************************************************
-+* All the commands should have the frame structure:
-+*

-+****************************************************/
-+
-+/*****************************************************************
-+* Inject a bit to NWay register through CSR9_MDC,MDIO
-+*******************************************************************/
-+void mii_serial_write(char bit_MDO) // write data into mii PHY
-+{
-+#ifdef CONFIG_SL2312_LPC_IT8712
-+	unsigned char iomode,status;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode |= (LPC_EECK|LPC_EDIO) ;				// Set EECK,EDIO,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	if(bit_MDO)
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status |= LPC_EDIO ;		//EDIO high
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+	else
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status &= ~(LPC_EDIO) ;		//EDIO low
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+
-+	status |= LPC_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(LPC_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+    unsigned int addr;
-+    unsigned int value;
-+
-+    addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
-+    value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
-+    writel(value,addr);
-+    if(bit_MDO)
-+    {
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDIO,addr); /* set MDIO to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDC,addr); /* set MDC to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDC,addr); /* set MDC to 0 */
-+    }
-+    else
-+    {
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDIO,addr); /* set MDIO to 0 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDC,addr); /* set MDC to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDC,addr); /* set MDC to 0 */
-+    }
-+
-+#endif
-+}
-+
-+/**********************************************************************
-+* read a bit from NWay register through CSR9_MDC,MDIO
-+***********************************************************************/
-+unsigned int mii_serial_read(void) // read data from mii PHY
-+{
-+#ifdef CONFIG_SL2312_LPC_IT8712
-+  	unsigned char iomode,status;
-+	unsigned int value ;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode &= ~(LPC_EDIO) ;		// Set EDIO input
-+	iomode |= (LPC_EECK) ;		// Set EECK,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	status = inb_gpio( LPC_GPIO_SET);
-+	status |= LPC_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(LPC_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	value = inb_gpio( LPC_GPIO_SET);
-+
-+	value = value>>2 ;
-+	value &= 0x01;
-+
-+	return value ;
-+
-+#else
-+    unsigned int *addr;
-+    unsigned int value;
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+    value = readl(addr) & ~GPIO_MDIO; //0xffbfffff;   /* set MDC to output and MDIO to input */
-+    writel(value,addr);
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
-+    writel(GPIO_MDC,addr); /* set MDC to 1 */
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+    writel(GPIO_MDC,addr); /* set MDC to 0 */
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
-+    value = readl(addr);
-+    value = (value & (1<> GPIO_MDIO_PIN;
-+    return(value);
-+
-+#endif
-+}
-+
-+/***************************************
-+* preamble + ST
-+***************************************/
-+void mii_pre_st(void)
-+{
-+    unsigned char i;
-+
-+    for(i=0;i<32;i++) // PREAMBLE
-+        mii_serial_write(1);
-+    mii_serial_write(0); // ST
-+    mii_serial_write(1);
-+}
-+
-+
-+/******************************************
-+* Read MII register
-+* phyad -> physical address
-+* regad -> register address
-+***************************************** */
-+unsigned int mii_read(unsigned char phyad,unsigned char regad)
-+{
-+    unsigned int i,value;
-+    unsigned int bit;
-+
-+    if (phyad == GPHY_ADDR)
-+    {
-+        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
-+        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+    }
-+    else
-+    {
-+        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
-+        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+    }
-+    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    for (i=0;i<5;i++) { // REGAD
-+        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    mii_serial_read(); // TA_Z
-+//    if((bit=mii_serial_read()) !=0 ) // TA_0
-+//    {
-+//        return(0);
-+//    }
-+    value=0;
-+    for (i=0;i<16;i++) { // READ DATA
-+        bit=mii_serial_read();
-+        value += (bit<<(15-i)) ;
-+    }
-+
-+    mii_serial_write(0); // dumy clock
-+    mii_serial_write(0); // dumy clock
-+
-+	//printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
-+    return(value);
-+}
-+
-+/******************************************
-+* Write MII register
-+* phyad -> physical address
-+* regad -> register address
-+* value -> value to be write
-+***************************************** */
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
-+{
-+    unsigned int i;
-+    char bit;
-+
-+	printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
-+    if (phyad == GPHY_ADDR)
-+    {
-+        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
-+        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+    }
-+    else
-+    {
-+        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
-+        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+    }
-+    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    for (i=0;i<5;i++) { // REGAD
-+        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+    mii_serial_write(1); // TA_1
-+    mii_serial_write(0); // TA_0
-+
-+    for (i=0;i<16;i++) { // OUT DATA
-+        bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
-+        mii_serial_write(bit);
-+    }
-+    mii_serial_write(0); // dumy clock
-+    mii_serial_write(0); // dumy clock
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_set_rx_mode
-+*----------------------------------------------------------------------*/
-+static void gmac_set_rx_mode(struct net_device *dev)
-+{
-+    GMAC_RX_FLTR_T      filter;
-+	unsigned int        mc_filter[2];	/* Multicast hash filter */
-+    int                 bit_nr;
-+	unsigned int        i;
-+	GMAC_INFO_T 		*tp = dev->priv;
-+
-+//    printk("%s : dev->flags = %x \n",__func__,dev->flags);
-+//    dev->flags |= IFF_ALLMULTI;  /* temp */
-+    filter.bits32 = 0;
-+    filter.bits.error = 0;
-+	if (dev->flags & IFF_PROMISC)
-+	{
-+	    filter.bits.error = 1;
-+        filter.bits.promiscuous = 1;
-+        filter.bits.broadcast = 1;
-+        filter.bits.multicast = 1;
-+        filter.bits.unicast = 1;
-+		mc_filter[1] = mc_filter[0] = 0xffffffff;
-+	}
-+	else if (dev->flags & IFF_ALLMULTI)
-+	{
-+//        filter.bits.promiscuous = 1;
-+        filter.bits.broadcast = 1;
-+        filter.bits.multicast = 1;
-+        filter.bits.unicast = 1;
-+		mc_filter[1] = mc_filter[0] = 0xffffffff;
-+	}
-+	else
-+	{
-+		struct dev_mc_list *mclist;
-+
-+//        filter.bits.promiscuous = 1;
-+        filter.bits.broadcast = 1;
-+        filter.bits.multicast = 1;
-+        filter.bits.unicast = 1;
-+		mc_filter[1] = mc_filter[0] = 0;
-+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next)
-+		{
-+            bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f;
-+            if (bit_nr < 32)
-+            {
-+                mc_filter[0] = mc_filter[0] | (1<base_addr,GMAC_RX_FLTR,filter.bits32,0xffffffff);  //chech base address!!!
-+    gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,mc_filter[0],0xffffffff);
-+    gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,mc_filter[1],0xffffffff);
-+    return;
-+}
-+
-+#ifdef CONFIG_SL_NAPI
-+/*----------------------------------------------------------------------
-+* gmac_rx_poll
-+*----------------------------------------------------------------------*/
-+static int gmac_rx_poll(struct net_device *dev, int *budget)
-+{
-+	TOE_INFO_T			*toe;
-+    GMAC_RXDESC_T   	*curr_desc;
-+	struct sk_buff 		*skb;
-+    DMA_RWPTR_T			rwptr;
-+	unsigned int 		pkt_size;
-+	unsigned int        desc_count;
-+	unsigned int        good_frame, chksum_status, rx_status;
-+	int                 rx_pkts_num = 0;
-+	int                 quota = min(dev->quota, *budget);
-+	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
-+	unsigned int		status4;
-+	volatile DMA_RWPTR_T	fq_rwptr;
-+	int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
-+	//unsigned long		rx_old_bytes;
-+	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+	//unsigned long long	rx_time;
-+
-+
-+
-+#if 1
-+	if (do_again)
-+	{
-+			toe_gmac_fill_free_q();
-+			status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+			fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+			//printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
-+			if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
-+			{
-+						//status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+						do_again =0;
-+						//netif_rx_complete(dev);
-+						gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,	0x1);
-+						fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+						rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+			}
-+			else
-+				return 1;
-+	}
-+#endif
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+#if 0
-+	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
-+	{
-+		mac_stop_txdma((struct net_device *)tp->dev);
-+		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
-+				rwptr.bits32, tp->rx_rwptr.bits.rptr);
-+		while(1);
-+	}
-+#endif
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	//printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x),   fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
-+	//printk("%s:---Before while   rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+//	while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
-+
-+	while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
-+	{
-+
-+    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+		tp->default_q_cnt++;
-+    	tp->rx_curr_desc = (unsigned int)curr_desc;
-+    	rx_status = curr_desc->word0.bits.status;
-+    	chksum_status = curr_desc->word0.bits.chksum_status;
-+    	tp->rx_status_cnt[rx_status]++;
-+    	tp->rx_chksum_cnt[chksum_status]++;
-+        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
-+		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
-+		good_frame=1;
-+		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
-+			|| (pkt_size < 60)
-+		    || (chksum_status & 0x4)
-+		    || rx_status )
-+//			|| rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
-+		{
-+			good_frame = 0;
-+			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-+				printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
-+				printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+			if (rx_status)
-+			{
-+				if (rx_status == 4 || rx_status == 7)
-+					isPtr->rx_crc_errors++;
-+//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
-+			}
-+#ifdef SL351x_GMAC_WORKAROUND
-+			else if (pkt_size < 60)
-+			{
-+				if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
-+					tp->short_frames_cnt++;
-+				if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+				{
-+					GMAC_CONFIG0_T config0;
-+					config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+					config0.bits.dis_rx = 1;
-+					writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+					config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+					config0.bits.dis_rx = 1;
-+					writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+				}
-+			}
-+#endif
-+//			if (chksum_status)
-+//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+		}
-+		if (good_frame)
-+		{
-+			if (curr_desc->word0.bits.drop)
-+				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
-+//			if (chksum_status)
-+//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+			{
-+				GMAC_CONFIG0_T config0;
-+				config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				config0.bits.dis_rx = 0;
-+				writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+				config0.bits.dis_rx = 0;
-+				writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+			}
-+			tp->short_frames_cnt = 0;
-+#endif
-+	    	/* get frame information from the first descriptor of the frame */
-+			isPtr->rx_packets++;
-+			//consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			tp->curr_rx_skb = skb;
-+	//		curr_desc->word2.buf_adr = 0;
-+
-+		    //skb_reserve (skb, SKB_RESERVE_BYTES);
-+			skb_reserve (skb, RX_INSERT_BYTES);	/* 2 byte align the IP fields. */
-+			//if ((skb->tail+pkt_size) > skb->end )
-+			//printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
-+			skb_put(skb, pkt_size);
-+
-+
-+			skb->dev = dev;
-+			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
-+			{
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+				{
-+					struct iphdr	*ip_hdr;
-+					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+					sl351x_nat_input(skb,
-+									tp->port_id,
-+									(void *)curr_desc->word3.bits.l3_offset,
-+								  	(void *)curr_desc->word3.bits.l4_offset);
-+				}
-+#endif
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+#if 0
-+#ifdef CONFIG_SL351x_RXTOE
-+				if (storlink_ctl.rx_max_pktsize) {
-+					struct iphdr	*ip_hdr;
-+					struct tcphdr	*tcp_hdr;
-+					int ip_hdrlen;
-+
-+ 					ip_hdr = (struct iphdr*)&(skb->data[0]);
-+					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
-+					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
-+						ip_hdrlen = ip_hdr->ihl << 2;
-+						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-+						if (tcp_hdr->syn) {
-+							struct toe_conn* connection = init_toeq(ip_hdr->version,
-+									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
-+							TCP_SKB_CB(skb)->connection = connection;
-+							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
-+							//		printk("%s::skb data %x, conn %x, mode %x\n",
-+							//			__func__, skb->data, connection, connection->mode);
-+						}
-+					}
-+				}
-+#endif
-+#endif
-+			}
-+			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
-+			{
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+				{
-+					struct iphdr	*ip_hdr;
-+					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+					if (ip_hdr->protocol == IPPROTO_UDP)
-+					{
-+						sl351x_nat_input(skb,
-+										tp->port_id,
-+										(void *)curr_desc->word3.bits.l3_offset,
-+								  		(void *)curr_desc->word3.bits.l4_offset);
-+					}
-+					else if (ip_hdr->protocol == IPPROTO_GRE)
-+					{
-+						sl351x_nat_input(skb,
-+									tp->port_id,
-+									(void *)curr_desc->word3.bits.l3_offset,
-+								  	(void *)curr_desc->word3.bits.l4_offset);
-+					}
-+				}
-+#endif
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+			}
-+			else
-+			{
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+			}
-+			//netif_rx(skb);  /* socket rx */
-+			netif_receive_skb(skb); //For NAPI
-+			dev->last_rx = jiffies;
-+
-+			isPtr->rx_bytes += pkt_size;
-+			//printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
-+
-+
-+        }
-+		// advance one for Rx default Q 0/1
-+		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+     	tp->rx_rwptr.bits32 = rwptr.bits32;
-+		rx_pkts_num++;
-+		//rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
-+		//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+		//printk("%s:---Loop  -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
-+#if 0
-+		if ((status4 & 0x1) == 0)
-+		{
-+			//if (!((dev->last_rx <= (rx_time + 2)) &&  (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
-+			if (tp->total_q_cnt_napi < 1024)
-+			{
-+				tp->total_q_cnt_napi++;
-+				toe_gmac_fill_free_q();  //for iperf test disable
-+			}
-+			//else
-+				//printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
-+
-+		}
-+#endif
-+		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+		//printk("%s:---Loop  -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
-+		//printk("%s:---Loop  rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+	}
-+	// advance one for Rx default Q 0/1
-+
-+		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+		//SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+     	//tp->rx_rwptr.bits32 = rwptr.bits32;
-+     	//rwptr.bits.rptr = rwptr.bits.rptr;
-+
-+	dev->quota -= rx_pkts_num;
-+	*budget -= rx_pkts_num;
-+
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
-+	//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
-+	//printk("%s:---After    rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+//	if (rwptr.bits.rptr > rwptr.bits.wptr )
-+//			{
-+				//toe_gmac_disable_rx(dev);
-+				//wait_event_interruptible_timeout(freeq_wait,
-+					//(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
-+				//printk("\n%s:: return 22222=======> rx_pkts_num =%d,   rwptr.bits.rptr=%d,   rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
-+					//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-+//				return 1;
-+//			}
-+
-+	if (rwptr.bits.rptr == rwptr.bits.wptr)
-+	{
-+		unsigned int data32;
-+			//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr]   rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+
-+	    /* Receive descriptor is empty now */
-+#if 1
-+     if (status4 & 0x1)
-+   			{
-+   				do_again =1;
-+   				//writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
-+   				//toe_gmac_disable_interrupt(tp->irq);
-+   				tp->sw_fq_empty_cnt++;
-+   				//toe_gmac_disable_rx(dev);
-+   				writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+   				//printk("\n%s ::  freeq int-----tp->sw_fq_empty_cnt  =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
-+   				//while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
-+   				//{
-+   					//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-+					//0x1);
-+				//printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
-+				//if ((status4 & 0x1) == 0)
-+					//break;
-+				 return 1;
-+				//}
-+
-+			}
-+#endif
-+        //toe_gmac_fill_free_q();
-+        netif_rx_complete(dev);
-+        // enable GMAC-0 rx interrupt
-+        // class-Q & TOE-Q are implemented in future
-+        //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+        //if (tp->port_id == 0)
-+        	//data32 |= DEFAULT_Q0_INT_BIT;
-+        //else
-+        	//data32 |= DEFAULT_Q1_INT_BIT;
-+        //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+		writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-+		//printk("\n%s::netif_rx_complete-->  rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
-+		//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-+        writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+        return 0;
-+    }
-+    else
-+    {
-+        //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x  ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-+        return 1;
-+    }
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* gmac_tx_timeout
-+*----------------------------------------------------------------------*/
-+void gmac_tx_timeout(struct net_device *dev)
-+{
-+	GMAC_INFO_T				*tp = (GMAC_INFO_T *)dev->priv;
-+
-+#ifdef CONFIG_SL351x_SYSCTL
-+	if (tp->operation && storlink_ctl.link[tp->port_id])
-+#else
-+	if (tp->operation)
-+#endif
-+	{
-+		netif_wake_queue(dev);
-+	}
-+}
-+
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_reg
-+*----------------------------------------------------------------------*/
-+int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2)
-+{
-+	int		total_key_dwords;
-+
-+	total_key_dwords = 1;
-+
-+	if (reg0 & MR_L2_BIT)
-+	{
-+		if (reg0 & MR_DA_BIT) total_key_dwords += 2;
-+		if (reg0 & MR_SA_BIT) total_key_dwords += 2;
-+		if ((reg0 & MR_DA_BIT) && ( reg0 & MR_SA_BIT)) total_key_dwords--;
-+		if (reg0 & (MR_PPPOE_BIT | MR_VLAN_BIT)) total_key_dwords++;
-+	}
-+	if (reg0 & MR_L3_BIT)
-+	{
-+		if (reg0 & (MR_IP_HDR_LEN_BIT | MR_TOS_TRAFFIC_BIT | MR_SPR_BITS))
-+			total_key_dwords++;
-+		if (reg0 & MR_FLOW_LABLE_BIT) total_key_dwords++;
-+		if ((reg0 & MR_IP_VER_BIT) == 0) // IPv4
-+		{
-+			if (reg1 & 0xff000000) total_key_dwords += 1;
-+			if (reg1 & 0x00ff0000) total_key_dwords += 1;
-+		}
-+		else
-+		{
-+			if (reg1 & 0xff000000) total_key_dwords += 4;
-+			if (reg1 & 0x00ff0000) total_key_dwords += 4;
-+		}
-+	}
-+	if (reg0 & MR_L4_BIT)
-+	{
-+		if (reg1 & 0x0000f000) total_key_dwords += 1;
-+		if (reg1 & 0x00000f00) total_key_dwords += 1;
-+		if (reg1 & 0x000000f0) total_key_dwords += 1;
-+		if (reg1 & 0x0000000f) total_key_dwords += 1;
-+		if (reg2 & 0xf0000000) total_key_dwords += 1;
-+		if (reg2 & 0x0f000000) total_key_dwords += 1;
-+	}
-+	if (reg0 & MR_L7_BIT)
-+	{
-+		if (reg2 & 0x00f00000) total_key_dwords += 1;
-+		if (reg2 & 0x000f0000) total_key_dwords += 1;
-+		if (reg2 & 0x0000f000) total_key_dwords += 1;
-+		if (reg2 & 0x00000f00) total_key_dwords += 1;
-+		if (reg2 & 0x000000f0) total_key_dwords += 1;
-+		if (reg2 & 0x0000000f) total_key_dwords += 1;
-+	}
-+
-+	if (total_key_dwords > HASH_MAX_KEY_DWORD)
-+		return -1;
-+
-+	if (total_key_dwords == 0 && enabled)
-+		return -2;
-+
-+	mac_set_rule_enable_bit(mac, rule, 0);
-+	if (enabled)
-+	{
-+		mac_set_MRxCRx(mac, rule, 0, reg0);
-+		mac_set_MRxCRx(mac, rule, 1, reg1);
-+		mac_set_MRxCRx(mac, rule, 2, reg2);
-+		mac_set_rule_action(mac, rule, total_key_dwords);
-+		mac_set_rule_enable_bit(mac, rule, enabled);
-+	}
-+	else
-+	{
-+		mac_set_rule_action(mac, rule, 0);
-+	}
-+	return total_key_dwords;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_get_rule_enable_bit
-+*----------------------------------------------------------------------*/
-+int mac_get_rule_enable_bit(int mac, int rule)
-+{
-+	switch (rule)
-+	{
-+		case 0: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 15) & 1);
-+		case 1: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 31) & 1);
-+		case 2: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 15) & 1);
-+		case 3: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 31) & 1);
-+		default: return 0;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_enable_bit
-+*----------------------------------------------------------------------*/
-+void mac_set_rule_enable_bit(int mac, int rule, int data)
-+{
-+	u32 reg;
-+
-+	if (data & ~1)
-+		return;
-+
-+	switch (rule)
-+	{
-+		case 0:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<15)) | (data << 15);
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
-+			break;
-+		case 1:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<31)) | (data << 31);
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
-+			break;
-+		case 2:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<15)) | (data << 15);
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
-+			break;
-+		case 3:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<31)) | (data << 31);
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_action
-+*----------------------------------------------------------------------*/
-+int mac_set_rule_action(int mac, int rule, int data)
-+{
-+	u32 reg;
-+
-+	if (data > 32)
-+		return -1;
-+
-+	if (data)
-+		data = (data << 6) | (data + HASH_ACTION_DWORDS);
-+	switch (rule)
-+	{
-+		case 0:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff));
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | data);
-+			break;
-+		case 1:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff<<16));
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | (data << 16));
-+			break;
-+		case 2:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff));
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1,  reg | data);
-+			break;
-+		case 3:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff<<16));
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg | (data << 16));
-+			break;
-+		default:
-+			return -1;
-+	}
-+
-+	return 0;
-+}
-+/*----------------------------------------------------------------------
-+* mac_get_MRxCRx
-+*----------------------------------------------------------------------*/
-+int mac_get_MRxCRx(int mac, int rule, int ctrlreg)
-+{
-+	int reg;
-+
-+	switch (rule)
-+	{
-+		case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
-+		case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
-+		case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
-+		case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
-+		default: return 0;
-+	}
-+	return mac_read_dma_reg(mac, reg);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_MRxCRx
-+*----------------------------------------------------------------------*/
-+void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data)
-+{
-+	int reg;
-+
-+	switch (rule)
-+	{
-+		case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
-+		case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
-+		case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
-+		case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
-+		default: return;
-+	}
-+	mac_write_dma_reg(mac, reg, data);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_priority
-+*----------------------------------------------------------------------*/
-+void mac_set_rule_priority(int mac, int p0, int p1, int p2, int p3)
-+{
-+	int 			i;
-+	GMAC_MRxCR0_T	reg[4];
-+
-+	for (i=0; i<4; i++)
-+		reg[i].bits32 = mac_get_MRxCRx(mac, i, 0);
-+
-+	reg[0].bits.priority = p0;
-+	reg[1].bits.priority = p1;
-+	reg[2].bits.priority = p2;
-+	reg[3].bits.priority = p3;
-+
-+	for (i=0; i<4; i++)
-+		mac_set_MRxCRx(mac, i, 0, reg[i].bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_netdev_ioctl
-+*----------------------------------------------------------------------*/
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+	int 				rc = 0;
-+    unsigned char		*hwa = rq->ifr_ifru.ifru_hwaddr.sa_data;
-+
-+#ifdef br_if_ioctl
-+    struct 				ethtool_cmd ecmd; 	//br_if.c will call this ioctl
-+	GMAC_INFO_T 		*tp = dev->priv;
-+#endif
-+
-+#ifdef 	CONFIG_SL351x_NAT
-+	if (cmd == SIOCDEVPRIVATE)
-+		return sl351x_nat_ioctl(dev, rq, cmd);
-+#endif
-+
-+	switch (cmd) {
-+	case SIOCETHTOOL:
-+#ifdef br_if_ioctl  	//br_if.c will call this ioctl
-+		if (!netif_running(dev))
-+		{
-+			printk("Before changing the H/W address,please down the device.\n");
-+			return -EINVAL;
-+		}
-+		memset((void *) &ecmd, 0, sizeof (ecmd));
-+           	    ecmd.supported =
-+                	SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
-+                    SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-+                    SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
-+         		    ecmd.port = PORT_TP;
-+            	    ecmd.transceiver = XCVR_EXTERNAL;
-+            	    ecmd.phy_address = tp->phy_addr;
-+            	    switch (tp->speed_status)
-+            	    {
-+            	    case GMAC_SPEED_10: ecmd.speed = SPEED_10; break;
-+             	    case GMAC_SPEED_100: ecmd.speed = SPEED_100; break;
-+            	    case GMAC_SPEED_1000: ecmd.speed = SPEED_1000; break;
-+            	    default: ecmd.speed = SPEED_10; break;
-+            	   }
-+            	    ecmd.duplex = tp->full_duplex_status ? DUPLEX_FULL : DUPLEX_HALF;
-+            	    ecmd.advertising = ADVERTISED_TP;
-+            	    ecmd.advertising |= ADVERTISED_Autoneg;
-+           	    ecmd.autoneg = AUTONEG_ENABLE;
-+                    if (copy_to_user(rq->ifr_data, &ecmd, sizeof (ecmd)))
-+                  	return -EFAULT;
-+#endif
-+
-+        break;
-+
-+    case SIOCSIFHWADDR:
-+		if (!netif_running(dev))
-+		{
-+			printk("Before changing the H/W address,please down the device.\n");
-+			return -EINVAL;
-+		}
-+        gmac_set_mac_address(dev,hwa);
-+        break;
-+
-+	case SIOCGMIIPHY:	/* Get the address of the PHY in use. */
-+        break;
-+
-+	case SIOCGMIIREG:	/* Read the specified MII register. */
-+		break;
-+
-+	case SIOCSMIIREG:	/* Write the specified MII register */
-+		break;
-+
-+	default:
-+		rc = -EOPNOTSUPP;
-+		break;
-+	}
-+
-+	return rc;
-+}
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+
-+#define GMAC_TX_STATE_OFFSET	0x60
-+#define GMAC_RX_STATE_OFFSET	0x64
-+#define GMAC_POLL_HANGED_NUM	200
-+#define GMAC_RX_HANGED_STATE	0x4b2000
-+#define GMAC_RX_HANGED_MASK		0xdff000
-+#define GMAC_TX_HANGED_STATE	0x34012
-+#define GMAC_TX_HANGED_MASK		0xfffff
-+#define TOE_GLOBAL_REG_SIZE		(0x78/sizeof(u32))
-+#define TOE_DMA_REG_SIZE		(0xd0/sizeof(u32))
-+#define TOE_GMAC_REG_SIZE		(0x30/sizeof(u32))
-+#define GMAC0_RX_HANG_BIT		(1 << 0)
-+#define GMAC0_TX_HANG_BIT		(1 << 1)
-+#define GMAC1_RX_HANG_BIT		(1 << 2)
-+#define GMAC1_TX_HANG_BIT		(1 << 3)
-+
-+int		gmac_in_do_workaround;
-+#if 0
-+int		debug_cnt, poll_max_cnt;
-+#endif
-+u32		gmac_workaround_cnt[4];
-+u32		toe_global_reg[TOE_GLOBAL_REG_SIZE];
-+u32		toe_dma_reg[GMAC_NUM][TOE_DMA_REG_SIZE];
-+u32		toe_gmac_reg[GMAC_NUM][TOE_GMAC_REG_SIZE];
-+u32		gmac_short_frame_workaround_cnt[2];
-+
-+static void sl351x_gmac_release_buffers(void);
-+static void sl351x_gmac_release_swtx_q(void);
-+static void sl351x_gmac_release_rx_q(void);
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_class_q(void);
-+static void sl351x_gmac_release_toe_q(void);
-+static void sl351x_gmac_release_intr_q(void);
-+#endif
-+static void sl351x_gmac_release_sw_free_q(void);
-+static void sl351x_gmac_release_hw_free_q(void);
-+#ifdef CONFIG_SL351x_NAT
-+static int get_free_desc_cnt(unsigned long rwptr, int total);
-+static void sl351x_gmac_release_hwtx_q(void);
-+u32     sl351x_nat_workaround_cnt;
-+#endif
-+void sl351x_gmac_save_reg(void);
-+void sl351x_gmac_restore_reg(void);
-+
-+
-+/*----------------------------------------------------------------------
-+* 	sl351x_poll_gmac_hanged_status
-+* 	- Called by timer routine, period 10ms
-+*	- If (state != 0 && state == prev state && )
-+*----------------------------------------------------------------------*/
-+void sl351x_poll_gmac_hanged_status(u32 data)
-+{
-+	int 			i;
-+	u32 			state;
-+	TOE_INFO_T		*toe;
-+	GMAC_INFO_T		*tp;
-+	u32				hanged_state;
-+	// int				old_operation[GMAC_NUM];
-+#ifdef CONFIG_SL351x_NAT
-+	u32				hw_free_cnt;
-+#endif
-+
-+	if (gmac_in_do_workaround)
-+		return;
-+
-+	gmac_in_do_workaround = 1;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	hanged_state = 0;
-+
-+#ifdef SL351x_TEST_WORKAROUND
-+	if (toe->gmac[0].operation || toe->gmac[1].operation)
-+	{
-+		debug_cnt++;
-+		if (debug_cnt == (30 * HZ))
-+		{
-+			debug_cnt = 0;
-+			hanged_state = GMAC0_RX_HANG_BIT;
-+			goto do_workaround;
-+		}
-+	}
-+#endif
-+	if (toe->gmac[0].operation)
-+		hanged_state |= GMAC0_RX_HANG_BIT | GMAC0_TX_HANG_BIT;
-+
-+#if (GMAC_NUM > 1)
-+	if (toe->gmac[1].operation)
-+		hanged_state |= GMAC1_RX_HANG_BIT | GMAC1_TX_HANG_BIT;
-+#endif
-+
-+	for (i=0; i 1)
-+		if (hanged_state & GMAC1_RX_HANG_BIT)
-+		{
-+			state = readl(TOE_GMAC1_BASE + GMAC_RX_STATE_OFFSET) & GMAC_RX_HANGED_MASK;
-+			if (state != GMAC_RX_HANGED_STATE)
-+				hanged_state &= ~GMAC1_RX_HANG_BIT;
-+		}
-+		if (hanged_state & GMAC1_TX_HANG_BIT)
-+		{
-+			state = readl(TOE_GMAC1_BASE + GMAC_TX_STATE_OFFSET) & GMAC_TX_HANGED_MASK;
-+			if (state != GMAC_TX_HANGED_STATE)
-+				hanged_state &= ~GMAC1_TX_HANG_BIT;
-+		}
-+#endif
-+		if (!hanged_state)
-+		{
-+#if 0
-+			if (i < poll_max_cnt)
-+				poll_max_cnt = i;
-+#endif
-+			if (toe->gmac[0].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+			{
-+				gmac_short_frame_workaround_cnt[0]++;
-+				toe->gmac[0].short_frames_cnt = 0;
-+				goto do_workaround;
-+			}
-+#if (GMAC_NUM > 1)
-+			if (toe->gmac[1].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+			{
-+				gmac_short_frame_workaround_cnt[1]++;
-+				toe->gmac[1].short_frames_cnt = 0;
-+				goto do_workaround;
-+			}
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT
-+			hw_free_cnt = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+			hw_free_cnt = get_free_desc_cnt(hw_free_cnt, TOE_HW_FREEQ_DESC_NUM);
-+#ifdef NAT_WORKAROUND_BY_RESET_GMAC
-+			if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= PAUSE_SET_HW_FREEQ))
-+			{
-+				sl351x_nat_workaround_cnt++;
-+				goto do_workaround;
-+			}
-+#else
-+			if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= (PAUSE_SET_HW_FREEQ*2)))
-+			{
-+				sl351x_nat_workaround_cnt++;
-+				sl351x_nat_workaround_handler();
-+			}
-+#endif
-+#endif
-+			gmac_in_do_workaround = 0;
-+			add_timer(&gmac_workround_timer_obj);
-+			return;
-+		}
-+	}
-+
-+do_workaround:
-+
-+	gmac_initialized = 0;
-+	if (hanged_state)
-+	{
-+		if (hanged_state & GMAC0_RX_HANG_BIT) gmac_workaround_cnt[0]++;
-+		if (hanged_state & GMAC0_TX_HANG_BIT) gmac_workaround_cnt[1]++;
-+		if (hanged_state & GMAC1_RX_HANG_BIT) gmac_workaround_cnt[2]++;
-+		if (hanged_state & GMAC1_TX_HANG_BIT) gmac_workaround_cnt[3]++;
-+	}
-+
-+	for (i=0; igmac[i];
-+		// old_operation[i] = tp->operation;
-+		if (tp->operation)
-+		{
-+			netif_stop_queue(tp->dev);
-+			clear_bit(__LINK_STATE_START, &tp->dev->state);
-+			toe_gmac_disable_interrupt(tp->irq);
-+			toe_gmac_disable_tx_rx(tp->dev);
-+			toe_gmac_hw_stop(tp->dev);
-+		}
-+	}
-+
-+	// clear all status bits
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+#if 0
-+	if ((hanged_state & GMAC0_RX_HANG_BIT) &&
-+		(readl(TOE_GMAC0_DMA_BASE + 0xdc) & 0xf0))
-+	{
-+		struct sk_buff *skb;
-+		unsigned int buf;
-+		buf = readl(TOE_GMAC0_DMA_BASE + 0x68) & ~3;
-+#ifdef CONFIG_SL351x_NAT
-+		if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
-+#endif
-+		{
-+			skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
-+			printk("GMAC-0 free a loss SKB 0x%x\n", (u32)skb);
-+			dev_kfree_skb(skb);
-+		}
-+	}
-+	if ((hanged_state & GMAC1_RX_HANG_BIT)  &&
-+		(readl(TOE_GMAC1_DMA_BASE + 0xdc) & 0xf0))
-+	{
-+		struct sk_buff *skb;
-+		unsigned int buf;
-+		buf = readl(TOE_GMAC1_DMA_BASE + 0x68) & ~3;
-+#ifdef CONFIG_SL351x_NAT
-+		if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
-+#endif
-+		{
-+			skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
-+			printk("GMAC-1 free a loss SKB 0x%x\n", (u32)skb);
-+			dev_kfree_skb(skb);
-+		}
-+	}
-+#endif
-+
-+	sl351x_gmac_release_buffers();
-+	sl351x_gmac_save_reg();
-+	toe_gmac_sw_reset();
-+	sl351x_gmac_restore_reg();
-+
-+	if (toe->gmac[0].default_qhdr->word1.bits32)
-+	{
-+		// printk("===> toe->gmac[0].default_qhdr->word1 = 0x%x\n", toe->gmac[0].default_qhdr->word1);
-+		sl351x_gmac_release_rx_q();
-+		writel(0, &toe->gmac[0].default_qhdr->word1);
-+	}
-+	if (toe->gmac[1].default_qhdr->word1.bits32)
-+	{
-+		// printk("===> toe->gmac[1].default_qhdr->word1 = 0x%x\n", toe->gmac[1].default_qhdr->word1);
-+		sl351x_gmac_release_rx_q();
-+		writel(0, &toe->gmac[1].default_qhdr->word1);
-+	}
-+
-+	gmac_initialized = 1;
-+
-+#ifdef 	CONFIG_SL351x_NAT
-+	writel(0, TOE_GLOBAL_BASE + 0x4084);
-+#endif
-+
-+	for (i=0; igmac[i];
-+ 		if (tp->operation)
-+ 		{
-+			toe_gmac_enable_interrupt(tp->irq);
-+			toe_gmac_hw_start(tp->dev);
-+			toe_gmac_enable_tx_rx(tp->dev);
-+			netif_wake_queue(tp->dev);
-+			set_bit(__LINK_STATE_START, &tp->dev->state);
-+		}
-+	}
-+
-+	gmac_in_do_workaround = 0;
-+	add_timer(&gmac_workround_timer_obj);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	get_free_desc_cnt
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int get_free_desc_cnt(unsigned long rwptr, int total)
-+{
-+	unsigned short wptr = rwptr & 0xffff;
-+	unsigned short rptr = rwptr >> 16;
-+
-+	if (wptr >= rptr)
-+		return (total - wptr + rptr);
-+	else
-+		return (rptr - wptr);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_buffers
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_buffers(void)
-+{
-+	// Free buffers & Descriptors in all SW Tx Queues
-+	sl351x_gmac_release_swtx_q();
-+
-+	// Free buffers in Default Rx Queues
-+	sl351x_gmac_release_rx_q();
-+
-+#ifdef _TOEQ_CLASSQ_READY_
-+	// Free buffers in Classification Queues
-+	sl351x_gmac_release_class_q();
-+
-+	// Free buffers in TOE Queues
-+	sl351x_gmac_release_toe_q();
-+
-+	// Free buffers in Interrupt Queues
-+	sl351x_gmac_release_intr_q();
-+#endif
-+
-+	// Free buffers & descriptors in SW free queue
-+	sl351x_gmac_release_sw_free_q();
-+
-+	// Free buffers & descriptors in HW free queue
-+	sl351x_gmac_release_hw_free_q();
-+
-+#ifdef CONFIG_SL351x_NAT
-+	// Free buffers & descriptors in HW free queue
-+	sl351x_gmac_release_hwtx_q();
-+#endif
-+}
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_swtx_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_swtx_q(void)
-+{
-+	int				i, j;
-+	GMAC_TXDESC_T	*curr_desc;
-+	unsigned int	desc_count;
-+	TOE_INFO_T		*toe;
-+	GMAC_INFO_T		*tp;
-+	GMAC_SWTXQ_T	*swtxq;
-+	DMA_RWPTR_T		rwptr;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	tp = (GMAC_INFO_T *)&toe->gmac[0];
-+	for (i=0; iexisted) continue;
-+		swtxq = (GMAC_SWTXQ_T *)&tp->swtxq[0];
-+		for (j=0; jrwptr_reg);
-+				if (rwptr.bits.rptr == swtxq->finished_idx)
-+				break;
-+				curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+				// if (curr_desc->word0.bits.status_tx_ok)
-+				{
-+					desc_count = curr_desc->word0.bits.desc_count;
-+					while (--desc_count)
-+					{
-+						curr_desc->word0.bits.status_tx_ok = 0;
-+						swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+						curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+					}
-+
-+					curr_desc->word0.bits.status_tx_ok = 0;
-+					if (swtxq->tx_skb[swtxq->finished_idx])
-+					{
-+						dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
-+						swtxq->tx_skb[swtxq->finished_idx] = NULL;
-+					}
-+				}
-+				swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+			}
-+			writel(0, swtxq->rwptr_reg);
-+			swtxq->finished_idx = 0;
-+		}
-+	}
-+
-+}
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_rx_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_rx_q(void)
-+{
-+	int				i;
-+	TOE_INFO_T		*toe;
-+	GMAC_INFO_T		*tp;
-+	DMA_RWPTR_T		rwptr;
-+	volatile GMAC_RXDESC_T	*curr_desc;
-+	struct sk_buff			*skb;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	tp = (GMAC_INFO_T *)&toe->gmac[0];
-+	for (i=0; iexisted) continue;
-+		rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+		while (rwptr.bits.rptr != rwptr.bits.wptr)
-+		{
-+			curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+			rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+			SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+			rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+		}  // while
-+		writel(0, &tp->default_qhdr->word1);
-+		tp->rx_rwptr.bits32 = 0;
-+	} // for
-+
-+}
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_class_q
-+*----------------------------------------------------------------------*/
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_class_q(void)
-+{
-+	int				i;
-+	TOE_INFO_T		*toe;
-+	CLASSQ_INFO_T	*classq;
-+	DMA_RWPTR_T		rwptr;
-+	volatile GMAC_RXDESC_T	*curr_desc;
-+	struct sk_buff			*skb;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	classq = (CLASSQ_INFO_T *)&toe->classq[0];
-+	for (i=0; iqhdr->word1);
-+		while (rwptr.bits.rptr != rwptr.bits.wptr)
-+		{
-+			curr_desc = (GMAC_RXDESC_T *)classq->desc_base + rwptr.bits.rptr;
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+			rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, classq->desc_num);
-+			SET_RPTR(&classq->qhdr->word1, rwptr.bits.rptr);
-+			rwptr.bits32 = readl(&classq->qhdr->word1);
-+		}  // while
-+		writel(0, &classq->qhdr->word1);
-+		classq->rwptr.bits32 = 0;
-+	} // for
-+
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_toe_q
-+*----------------------------------------------------------------------*/
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_toe_q(void)
-+{
-+	int				i;
-+	TOE_INFO_T		*toe;
-+	TOEQ_INFO_T		*toeq_info;
-+	TOE_QHDR_T		*toe_qhdr;
-+	DMA_RWPTR_T		rwptr;
-+	volatile GMAC_RXDESC_T	*curr_desc;
-+	unsigned int	rptr, wptr;
-+	GMAC_RXDESC_T	*toe_curr_desc;
-+	struct sk_buff			*skb;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	toe_qhdr = (TOE_QHDR_T *)TOE_TOE_QUE_HDR_BASE;
-+	for (i=0; itoeq[i];
-+		wptr = toe_qhdr->word1.bits.wptr;
-+		rptr = toe_qhdr->word1.bits.rptr;
-+		while (rptr != wptr)
-+		{
-+			toe_curr_desc = (GMAC_RXDESC_T *)toeq_info->desc_base + rptr;
-+			skb = (struct sk_buff *)(REG32(__va(toe_curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+			rptr = RWPTR_ADVANCE_ONE(rptr, toeq_info->desc_num);
-+			SET_RPTR(&toe_qhdr->word1.bits32, rptr);
-+			wptr = toe_qhdr->word1.bits.wptr;
-+			rptr = toe_qhdr->word1.bits.rptr;
-+		}
-+		toe_qhdr->word1.bits32 = 0;
-+		toeq_info->rwptr.bits32 = 0;
-+	}
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_intr_q
-+*----------------------------------------------------------------------*/
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_intr_q(void)
-+{
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_sw_free_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_sw_free_q(void)
-+{
-+	TOE_INFO_T				*toe;
-+	volatile DMA_RWPTR_T	fq_rwptr;
-+	volatile GMAC_RXDESC_T	*fq_desc;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+
-+	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr)
-+	{
-+		struct sk_buff *skb;
-+		if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
-+		{
-+			printk("%s::skb buffer allocation fail !\n",__func__); while(1);
-+		}
-+		// *(unsigned int *)(skb->data) = (unsigned int)skb;
-+		REG32(skb->data) = (unsigned long)skb;
-+		skb_reserve(skb, SKB_RESERVE_BYTES);
-+
-+		fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+		fq_desc = (volatile GMAC_RXDESC_T *)toe->swfq_desc_base + fq_rwptr.bits.wptr;
-+		fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+		SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+		fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	}
-+
-+	toe->fq_rx_rwptr.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
-+	toe->fq_rx_rwptr.bits.rptr = 0;
-+	writel(toe->fq_rx_rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+
-+}
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_hw_free_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_hw_free_q(void)
-+{
-+	DMA_RWPTR_T			rwptr_reg;
-+
-+#ifdef CONFIG_SL351x_NAT
-+	int					i;
-+	TOE_INFO_T			*toe;
-+	GMAC_RXDESC_T		*desc_ptr;
-+	unsigned int		buf_ptr;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	desc_ptr = (GMAC_RXDESC_T *)toe->hwfq_desc_base;
-+	buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
-+	for (i=0; iword0.bits.buffer_size = HW_RX_BUF_SIZE;
-+		desc_ptr->word1.bits.sw_id = i;
-+		desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
-+   		desc_ptr++;
-+   		buf_ptr += HW_RX_BUF_SIZE;
-+	}
-+#endif
-+	rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
-+	rwptr_reg.bits.rptr = 0;
-+	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+}
-+
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_hw_free_q
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void sl351x_gmac_release_hwtx_q(void)
-+{
-+	int				i;
-+	unsigned int	rwptr_addr;
-+
-+	rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+	for (i=0; ihwfq_desc_base;
-+	buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
-+	for (i=0; iword0.bits.buffer_size = HW_RX_BUF_SIZE;
-+		desc_ptr->word1.bits.sw_id = i;
-+		desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
-+		desc_ptr++;
-+		buf_ptr += HW_RX_BUF_SIZE;
-+	}
-+	rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+	rwptr.bits.wptr = RWPTR_RECEDE_ONE(rwptr.bits.rptr, TOE_HW_FREEQ_DESC_NUM);
-+	writel(rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+	writel(0, TOE_GLOBAL_BASE + 0x4084);
-+
-+	// Enable Rx of GMAC-0 & 1
-+	config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+	config0.bits.dis_rx = 0;
-+	writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+	config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+	config0.bits.dis_rx = 0;
-+	writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+}
-+#endif
-+#endif // CONFIG_SL351x_NAT
-+
-+#endif // SL351x_GMAC_WORKAROUND
-+
-+/* get the mac addresses from flash
-+ *can't do this in module_init because mtd driver is initialized after ethernet
-+ */
-+static __init int sl351x_mac_address_init(void)
-+{
-+	GMAC_INFO_T		*tp;
-+	struct sockaddr sock;
-+	int i;
-+
-+	/* get mac address from FLASH */
-+	gmac_get_mac_address();
-+
-+	for (i = 0; i < GMAC_NUM; i++) {
-+		tp = (GMAC_INFO_T *)&toe_private_data.gmac[i];
-+		memcpy(&sock.sa_data[0],ð_mac[tp->port_id][0],6);
-+		gmac_set_mac_address(tp->dev,(void *)&sock);
-+	}
-+
-+        return 0;
-+}
-+late_initcall(sl351x_mac_address_init);
-+
-+
---- /dev/null
-+++ b/drivers/net/sl351x_hash.c
-@@ -0,0 +1,713 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl351x_hash.c
-+* Description	:
-+*		Handle Storlink SL351x Hash Functions
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*	03/13/2006	Gary Chen	Create and implement
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+
-+#include 
-+#include 
-+#include 
-+
-+#ifndef RXTOE_DEBUG
-+#define RXTOE_DEBUG
-+#endif
-+#undef RXTOE_DEBUG
-+
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#define	hash_printf				printk
-+
-+#define HASH_TIMER_PERIOD		(30)	// seconds
-+#define HASH_ILLEGAL_INDEX		0xffff
-+
-+/*----------------------------------------------------------------------
-+* Variables
-+*----------------------------------------------------------------------*/
-+u32					hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
-+char 				hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
-+static struct timer_list hash_timer_obj;
-+LIST_HEAD(hash_timeout_list);
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length);
-+static void hash_timer_func(u32 data);
-+
-+/*----------------------------------------------------------------------
-+* hash_init
-+*----------------------------------------------------------------------*/
-+void sl351x_hash_init(void)
-+{
-+	int i;
-+	volatile u32 *dp1, *dp2, dword;
-+
-+	dp1 = (volatile u32 *) TOE_V_BIT_BASE;
-+	dp2 = (volatile u32 *) TOE_A_BIT_BASE;
-+
-+	for (i=0; iindex, 1);
-+//	printk("Dump hash key!\n");
-+//	dump_hash_key(entry);
-+	return entry->index;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_valid_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_valid_flag(int index, int valid)
-+{
-+	register u32 reg32;
-+
-+	reg32 = TOE_V_BIT_BASE + (index/32) * 4;
-+
-+	if (valid)
-+	{
-+		writel(readl(reg32) | (1 << (index%32)), reg32);
-+	}
-+	else
-+	{
-+		writel(readl(reg32) & ~(1 << (index%32)), reg32);
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_nat_owner_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_nat_owner_flag(int index, int valid)
-+{
-+	if (valid)
-+	{
-+		hash_nat_owner_bits[index/32] |= (1 << (index % 32));
-+	}
-+	else
-+	{
-+		hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
-+	}
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_build_keys
-+*----------------------------------------------------------------------*/
-+int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	u32 	data;
-+	unsigned char 	*cp;
-+	int				i, j;
-+	unsigned short 	index;
-+	int 			total;
-+
-+	memset((void *)destp, 0, HASH_MAX_BYTES);
-+	cp = (unsigned char *)destp;
-+
-+	if (entry->key_present.port || entry->key_present.Ethertype)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.Ethertype);		// word 0
-+		HASH_PUSH_BYTE(cp, entry->key.port);			// Byte 2
-+		HASH_PUSH_BYTE(cp, 0);							// Byte 3
-+	}
-+	else
-+	{
-+		HASH_PUSH_DWORD(cp, 0);
-+	}
-+
-+	if (entry->key_present.da || entry->key_present.sa)
-+	{
-+		unsigned char mac[4];
-+		if (entry->key_present.da)
-+		{
-+			for (i=0; i<4; i++)
-+				HASH_PUSH_BYTE(cp, entry->key.da[i]);
-+		}
-+		mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
-+		mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
-+		mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
-+		mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
-+		data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
-+		HASH_PUSH_DWORD(cp, data);
-+		if (entry->key_present.sa)
-+		{
-+			for (i=2; i<6; i++)
-+				HASH_PUSH_BYTE(cp, entry->key.sa[i]);
-+		}
-+	}
-+
-+	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
-+		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
-+	}
-+	if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.ip_protocol);		// Byte 0
-+		HASH_PUSH_BYTE(cp, entry->key.ip_tos);			// Byte 1
-+		HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen);		// Byte 2
-+		HASH_PUSH_BYTE(cp, 0);							// Byte 3
-+	}
-+
-+	if (entry->key_present.ipv6_flow_label)
-+	{
-+		HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label);	// low word
-+	}
-+	if (entry->key_present.sip)
-+	{
-+		// input (entry->key.sip[i]) is network-oriented
-+		// output (hash key) is host-oriented
-+		for (i=3; i>=0; i--)
-+			HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+		if (entry->key.ipv6)
-+		{
-+			for (i=4; i<16; i+=4)
-+			{
-+				for (j=i+3; j>=i; j--)
-+					HASH_PUSH_BYTE(cp, entry->key.sip[j]);
-+			}
-+		}
-+	}
-+	if (entry->key_present.dip)
-+	{
-+		// input (entry->key.sip[i]) is network-oriented
-+		// output (hash key) is host-oriented
-+		for (i=3; i>=0; i--)
-+			HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+		if (entry->key.ipv6)
-+		{
-+			for (i=4; i<16; i+=4)
-+			{
-+				for (j=i+3; j>=i; j--)
-+					HASH_PUSH_BYTE(cp, entry->key.dip[j]);
-+			}
-+		}
-+	}
-+
-+	if (entry->key_present.l4_bytes_0_3)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+	}
-+	if (entry->key_present.l4_bytes_4_7)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
-+	}
-+	if (entry->key_present.l4_bytes_8_11)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
-+	}
-+	if (entry->key_present.l4_bytes_12_15)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
-+	}
-+	if (entry->key_present.l4_bytes_16_19)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
-+	}
-+	if (entry->key_present.l4_bytes_20_23)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
-+	}
-+	if (entry->key_present.l7_bytes_0_3)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
-+	}
-+	if (entry->key_present.l7_bytes_4_7)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
-+	}
-+	if (entry->key_present.l7_bytes_8_11)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
-+	}
-+	if (entry->key_present.l7_bytes_12_15)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
-+	}
-+	if (entry->key_present.l7_bytes_16_19)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
-+	}
-+	if (entry->key_present.l7_bytes_20_23)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
-+	}
-+
-+	// get hash index
-+	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+	if (total > HASH_MAX_KEY_DWORD)
-+	{
-+		//hash_printf("Total key words (%d) is too large (> %d)!\n",
-+		//				total, HASH_MAX_KEY_DWORD);
-+		return -1;
-+	}
-+
-+	if (entry->key_present.port || entry->key_present.Ethertype)
-+		index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+	else
-+	{
-+		if (total == 1)
-+		{
-+			hash_printf("No key is assigned!\n");
-+			return -1;
-+		}
-+
-+		index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
-+	}
-+
-+	entry->index = index & HASH_BITS_MASK;
-+
-+	//hash_printf("Total key words = %d, Hash Index= %d\n",
-+	//				total, entry->index);
-+
-+	cp = (unsigned char *)destp;
-+	cp+=3;
-+	HASH_PUSH_BYTE(cp, entry->rule);	// rule
-+
-+	entry->total_dwords = total;
-+
-+	return total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_build_nat_keys
-+*----------------------------------------------------------------------*/
-+void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	unsigned char 	*cp;
-+	int				i;
-+	unsigned short 	index;
-+	int 			total;
-+
-+	memset((void *)destp, 0, HASH_MAX_BYTES);
-+
-+	cp = (unsigned char *)destp + 2;
-+	HASH_PUSH_BYTE(cp, entry->key.port);
-+	cp++;
-+
-+	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
-+		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
-+	}
-+
-+	HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
-+	cp+=3;
-+
-+	// input (entry->key.sip[i]) is network-oriented
-+	// output (hash key) is host-oriented
-+	for (i=3; i>=0; i--)
-+		HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+
-+	// input (entry->key.sip[i]) is network-oriented
-+	// output (hash key) is host-oriented
-+	for (i=3; i>=0; i--)
-+		HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+
-+	// get hash index
-+	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+	index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+	entry->index = index & ((1 << HASH_BITS) - 1);
-+
-+	cp = (unsigned char *)destp;
-+	cp+=3;
-+	HASH_PUSH_BYTE(cp, entry->rule);	// rule
-+
-+	entry->total_dwords = total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_build_toe_keys
-+*----------------------------------------------------------------------*/
-+int hash_build_toe_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	unsigned long	data;
-+	unsigned char	*cp;
-+	unsigned short	index;
-+	int	i;
-+	int total;
-+	//printk("%s\n", __func__);
-+	memset((void*)destp, 0, HASH_MAX_BYTES);
-+	cp = (unsigned char*)destp;
-+
-+	if(entry->key_present.port || entry->key_present.Ethertype) {
-+		data = (entry->key.port << 16) + entry->key.Ethertype;
-+		HASH_PUSH_DWORD(cp, data);
-+	} else
-+		HASH_PUSH_DWORD(cp, 0);
-+
-+	if (entry->key_present.da || entry->key_present.sa) {
-+		unsigned char	mac[4];
-+		if (entry->key_present.da) {
-+			data = (entry->key.da[0]) + (entry->key.da[1] << 8) +
-+				   (entry->key.da[2] << 16) + (entry->key.da[3] <<24);
-+			HASH_PUSH_DWORD(cp, data);
-+		}
-+		mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
-+		mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
-+		mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
-+		mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
-+		data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
-+		HASH_PUSH_DWORD(cp, data);
-+		if (entry->key_present.sa) {
-+			data = (entry->key.sa[2]) + (entry->key.sa[3] << 8) +
-+				   (entry->key.sa[4] << 16) + (entry->key.sa[5] <<24);
-+			HASH_PUSH_DWORD(cp, data);
-+		}
-+	}
-+
-+	if (entry->key_present.ip_protocol) {
-+		unsigned char ip_protocol;
-+		ip_protocol = entry->key.ip_protocol;
-+		data = ip_protocol;
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+
-+	if (entry->key_present.ipv6_flow_label) {
-+		unsigned long flow_label;
-+		flow_label  = entry->key.ipv6_flow_label;
-+		data = flow_label & 0xfffff;
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+
-+	if (entry->key_present.sip)	{
-+		{
-+			data = IPIV(entry->key.sip[0], entry->key.sip[1],
-+					entry->key.sip[2], entry->key.sip[3]);
-+			HASH_PUSH_DWORD(cp, data);
-+			if (entry->key.ipv6) {
-+				for (i=4; i<16; i+=4) {
-+					data = IPIV(entry->key.sip[i+0], entry->key.sip[i+1],
-+							entry->key.sip[i+2], entry->key.sip[i+3]);
-+					HASH_PUSH_DWORD(cp, data);
-+				}
-+			}
-+		}
-+	}
-+
-+	if (entry->key_present.dip)	{
-+		{
-+			data = IPIV(entry->key.dip[0], entry->key.dip[1],
-+						entry->key.dip[2], entry->key.dip[3]);
-+			HASH_PUSH_DWORD(cp, data);
-+			if (entry->key.ipv6) {
-+				for (i=4; i<16; i+=4) {
-+					data = IPIV(entry->key.dip[i+0], entry->key.dip[i+1],
-+								entry->key.dip[i+2], entry->key.dip[i+3]);
-+					HASH_PUSH_DWORD(cp, data);
-+				}
-+			}
-+		}
-+	}
-+	if (entry->key_present.l4_bytes_0_3)
-+	{
-+		unsigned char *datap;
-+		datap = &entry->key.l4_bytes[0];
-+		data = 	datap[0] + 	(datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+	if (entry->key_present.l7_bytes_0_3)
-+	{
-+		unsigned char *datap;
-+		datap = &entry->key.l7_bytes[0];
-+		data = 	datap[0] + 	(datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+	if (entry->key_present.l7_bytes_4_7)
-+	{
-+		unsigned char *datap;
-+		datap = &entry->key.l7_bytes[4];
-+		data = 	datap[0] + 	(datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+
-+	total = (unsigned long)((unsigned long)cp - (unsigned long)destp) / (sizeof(u32));
-+	if (total > HASH_MAX_KEY_DWORD) {
-+		//printf("Total key words (%d) is too large (> %d)!\n",
-+		//		total, HASH_MAX_KEY_DWORD);
-+		return -1;
-+	}
-+	index = hash_gen_crc16((unsigned char*)(destp + 1), (total-1)*4);
-+	entry->index = index & ((1 << HASH_BITS)-1);
-+
-+	cp = (unsigned char*) destp;
-+	cp += 3;
-+	HASH_PUSH_BYTE(cp, entry->rule);
-+	entry->total_dwords = total;
-+	return total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_add_toe_entry
-+*----------------------------------------------------------------------*/
-+int hash_add_toe_entry(HASH_ENTRY_T *entry)
-+{
-+	int	rc;
-+	u32	key[HASH_MAX_DWORDS];
-+
-+	rc = hash_build_toe_keys((u32 *)&key, entry);
-+	if (rc < 0)
-+		return -1;
-+	hash_write_entry(entry, (unsigned char*) &key[0]);
-+	//hash_dump_entry(entry->index);
-+//	hash_set_valid_flag(entry->index, 1);
-+//	printk("Dump hash key!\n");
-+//	dump_hash_key(entry);
-+	return entry->index;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_write_entry
-+*----------------------------------------------------------------------*/
-+int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
-+{
-+	int		i;
-+	u32		*srcep, *destp, *destp2;
-+
-+	srcep = (u32 *)key;
-+	destp2 = destp = (u32 *)&hash_tables[entry->index][0];
-+
-+	for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
-+		*destp = *srcep;
-+
-+	srcep = (u32 *)&entry->action;
-+	*destp++ = *srcep;
-+
-+	srcep = (u32 *)&entry->param;
-+	for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
-+		*destp = *srcep;
-+
-+	memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
-+
-+	consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_timer_func
-+*----------------------------------------------------------------------*/
-+static void hash_timer_func(u32 data)
-+{
-+	int					i, j, idx;
-+	volatile u32		*own_p, *valid_p;
-+	u32					own_bits, a_bits;
-+	int					period = HASH_TIMER_PERIOD;
-+
-+	valid_p = (volatile u32 *)TOE_V_BIT_BASE;
-+	own_p = (volatile u32 *)hash_nat_owner_bits;
-+	for (i=0, idx=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, valid_p++, idx+=32)
-+	{
-+		a_bits = readl(TOE_A_BIT_BASE + (i*4));
-+		own_bits = *own_p;
-+		if (own_bits)
-+		{
-+			for (j=0; own_bits && j<32; j++)
-+			{
-+				if (own_bits & 1)
-+				{
-+					short *counter_p, *interval_p;
-+					NAT_HASH_ENTRY_T	*nat_entry;
-+					GRE_HASH_ENTRY_T	*gre_entry;
-+					nat_entry = (NAT_HASH_ENTRY_T *)hash_get_entry(idx+j);
-+					gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
-+					if (nat_entry->key.ip_protocol == IPPROTO_GRE)
-+					{
-+						counter_p = (short *)&gre_entry->tmo.counter;
-+						interval_p = (short *)&gre_entry->tmo.interval;
-+					}
-+					else
-+					{
-+						counter_p = (short *)&nat_entry->tmo.counter;
-+						interval_p = (short *)&nat_entry->tmo.interval;
-+					}
-+					if (a_bits & 1)
-+					{
-+						*counter_p = *interval_p;
-+					}
-+					else
-+					{
-+						*counter_p -= HASH_TIMER_PERIOD;
-+						if (*counter_p <= 0)
-+						{
-+							*valid_p &= ~(1 << j);		// invalidate it
-+							*own_p &= ~(1 << j);		// release ownership for NAT
-+							*counter_p = 0;
-+							// hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
-+						}
-+						else if (period > *counter_p)
-+						{
-+							period = *counter_p;
-+						}
-+					}
-+				}
-+				a_bits >>= 1;
-+				own_bits >>=1;
-+			}
-+		}
-+	}
-+
-+	hash_timer_obj.expires = jiffies + (period * HZ);
-+	add_timer((struct timer_list *)data);
-+}
-+
-+/*----------------------------------------------------------------------
-+* dm_long
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length)
-+{
-+	u32		*start_p, *curr_p, *end_p;
-+	u32		*datap, data;
-+	int		i;
-+
-+	//if (length > 1024)
-+	//	length = 1024;
-+
-+	start_p = (u32 *)location;
-+	end_p = (u32 *)location + length;
-+	curr_p = (u32 *)((u32)location & 0xfffffff0);
-+	datap = (u32 *)location;
-+	while (curr_p < end_p)
-+	{
-+		hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
-+		for (i=0; i<4; i++)
-+		{
-+			if (curr_p < start_p || curr_p >= end_p)
-+               hash_printf("         ");
-+			else
-+			{
-+				data = *datap;
-+				hash_printf("%08X ", data);
-+			}
-+			if (i==1)
-+              hash_printf("- ");
-+
-+			curr_p++;
-+			datap++;
-+		}
-+        hash_printf("\n");
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_dump_entry
-+*----------------------------------------------------------------------*/
-+void hash_dump_entry(int index)
-+{
-+	hash_printf("Hash Index %d:\n", index);
-+	dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/sl351x_nat.c
-@@ -0,0 +1,1736 @@
-+/****************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*----------------------------------------------------------------------------
-+* Name			: sl351x_nat.c
-+* Description	:
-+*		Handle Storlink SL351x NAT Functions
-+*
-+*
-+* Packet Flow:
-+*
-+*            (xmit)+<--- SW NAT -->+(xmit)
-+*                  |       ^^      |
-+*                  |       ||      |
-+*                  |       ||      |
-+*   Client <---> GMAC-x  HW-NAT  GMAC-y  <---> Server
-+*
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*	03/13/2006	Gary Chen	Create and implement
-+*
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#ifdef CONFIG_NETFILTER
-+// #include 
-+#include 
-+#endif
-+
-+//#define NAT_DEBUG_MSG		1
-+#define _NOT_CHECK_SIP_DIP
-+//#define	SL351x_NAT_TEST_BY_SMARTBITS		1	// Initialize 32 hash entries and test by SmartBITS
-+#define VITESSE_G5SWITCH	1
-+
-+#ifdef CONFIG_SL351x_NAT
-+
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL3516_ASIC
-+#define CONFIG_SL351x_NAT_TCP_UDP
-+#define CONFIG_SL351x_NAT_GRE
-+#define CONFIG_SL351x_TCP_UDP_RULE_ID	0
-+#define CONFIG_SL351x_GRE_RULE_ID		1
-+#else
-+#define CONFIG_SL351x_NAT_TCP_UDP
-+//#define CONFIG_SL351x_NAT_GRE
-+#define CONFIG_SL351x_TCP_UDP_RULE_ID	0
-+#define CONFIG_SL351x_GRE_RULE_ID		0
-+#endif
-+
-+#define	nat_printf					printk
-+#define NAT_FTP_CTRL_PORT 			(21)	// TCP
-+#define NAT_H323_PORT				(1720)	// TCP
-+#define NAT_T120_PORT				(1503)	// TCP
-+#define NAT_PPTP_PORT				(1723)	// TCP
-+#define NAT_TFTP_PORT 				(69)	// UDP
-+#define NAT_DNS_PORT 				(53)	// UDP
-+#define NAT_NTP_PORT				(123)	// UDP
-+#define NAT_RAS_PORT				(1719)	// UDP
-+#define NAT_BOOTP67_PORT			(67)	// UDP
-+#define NAT_BOOTP68_PORT			(68)	// UDP
-+
-+#define NAT_TCP_PORT_MAX			64
-+#define NAT_UDP_PORT_MAX			64
-+
-+#define GRE_PROTOCOL				(0x880b)
-+#define GRE_PROTOCOL_SWAP			__constant_htons(0x880b)
-+
-+#ifdef VITESSE_G5SWITCH
-+extern int Giga_switch;
-+#endif
-+
-+typedef struct
-+{
-+	u16		flags_ver;
-+	u16		protocol;
-+	u16		payload_length;
-+	u16		call_id;
-+	u32		seq;
-+	u32		ack;
-+} GRE_PKTHDR_T;
-+
-+/*----------------------------------------------------------------------
-+* NAT Configuration
-+*
-+* Note: Any change for network setting, the NAT configuration should
-+*       be changed also.
-+*	cfg->lan_port	0 if GMAC-0, 1: if GMAC-1
-+*	cfg->wan_port	0 if GMAC-0, 1: if GMAC-1
-+*	cfg->lan_ipaddr, cfg->lan_gateway, cfg->lan_netmask
-+*	cfg->wan_ipaddr, cfg->wan_gateway, cfg->wan_netmask
-+*
-+*----------------------------------------------------------------------*/
-+NAT_CFG_T 		nat_cfg;
-+static int		nat_initialized;
-+u32 			nat_collision;
-+
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+static u16		fixed_tcp_port_list[]={NAT_FTP_CTRL_PORT,
-+							   			NAT_H323_PORT,
-+							   			// NAT_T120_PORT,
-+							   			NAT_PPTP_PORT,
-+										0};
-+static u16		fixed_udp_port_list[]={NAT_DNS_PORT,
-+									  	NAT_NTP_PORT,
-+									  	NAT_TFTP_PORT,
-+										NAT_RAS_PORT,
-+									  	NAT_BOOTP67_PORT,
-+									  	NAT_BOOTP68_PORT,
-+									   	0};
-+#endif
-+
-+// #define _HAVE_DYNAMIC_PORT_LIST
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+static u16		dynamic_tcp_port_list[NAT_TCP_PORT_MAX+1];
-+static u16		dynamic_udp_port_list[NAT_UDP_PORT_MAX+1]};
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port);
-+int sl351x_nat_udp_output(struct sk_buff *skb, int port);
-+int sl351x_nat_gre_output(struct sk_buff *skb, int port);
-+
-+extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
-+extern void hash_dump_entry(int index);
-+extern void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
-+extern void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
-+
-+#ifdef SL351x_NAT_TEST_BY_SMARTBITS
-+static void nat_init_test_entry(void);
-+#endif
-+/*----------------------------------------------------------------------
-+* sl351x_nat_init
-+*	initialize a NAT matching rule
-+*	Called by SL351x Driver
-+*		key		: port, protocol, Sip, Dip, Sport, Dport
-+*		Action	: Srce Q: HW Free Queue,
-+*				  Dest Q: HW TxQ
-+*				  Change DA
-+*				  Change SA
-+*                 Change Sip or Dip
-+*    			  Change Sport or Dport
-+*----------------------------------------------------------------------*/
-+void sl351x_nat_init(void)
-+{
-+	int					rc;
-+	GMAC_MRxCR0_T		mrxcr0;
-+	GMAC_MRxCR1_T		mrxcr1;
-+	GMAC_MRxCR2_T		mrxcr2;
-+	NAT_CFG_T			*cfg;
-+
-+	if (nat_initialized)
-+		return;
-+
-+	nat_initialized = 1;
-+
-+	if ((sizeof(NAT_HASH_ENTRY_T) > HASH_MAX_BYTES) ||
-+		(sizeof(GRE_HASH_ENTRY_T) > HASH_MAX_BYTES))
-+	{
-+		nat_printf("NAT_HASH_ENTRY_T structure Size is too larger!\n");
-+		while(1);
-+	}
-+
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+	memset((void *)cfg, 0, sizeof(NAT_CFG_T));
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+	memset((void *)dynamic_tcp_port_list, 0, sizeof(dynamic_tcp_port_list));
-+	memset((void *)dynamic_udp_port_list, 0, sizeof(dynamic_udp_port_list));
-+#endif
-+
-+#ifdef VITESSE_G5SWITCH
-+	if(Giga_switch)
-+	{
-+		cfg->enabled			= 1;
-+		cfg->tcp_udp_rule_id 	= CONFIG_SL351x_TCP_UDP_RULE_ID;
-+		cfg->gre_rule_id 		= CONFIG_SL351x_GRE_RULE_ID;
-+		cfg->lan_port			= 1;
-+		cfg->wan_port			= 0;
-+		cfg->default_hw_txq 	= 3;
-+		cfg->tcp_tmo_interval 	= 60;
-+		cfg->udp_tmo_interval 	= 180;
-+		cfg->gre_tmo_interval 	= 60;
-+	}
-+	else
-+	{
-+		cfg->enabled			= 1;
-+		cfg->tcp_udp_rule_id 	= CONFIG_SL351x_TCP_UDP_RULE_ID;
-+		cfg->gre_rule_id 		= CONFIG_SL351x_GRE_RULE_ID;
-+		cfg->lan_port			= 0;
-+		cfg->wan_port			= 1;
-+		cfg->default_hw_txq 	= 3;
-+		cfg->tcp_tmo_interval 	= 60;
-+		cfg->udp_tmo_interval 	= 180;
-+		cfg->gre_tmo_interval 	= 60;
-+
-+	}
-+#endif
-+
-+#if 1	//	debug purpose
-+	cfg->ipcfg[0].total				= 1;
-+	cfg->ipcfg[0].entry[0].ipaddr	= IPIV(192,168,2,92);
-+	cfg->ipcfg[0].entry[0].netmask	= IPIV(255,255,255,0);
-+	cfg->ipcfg[1].total				= 1;
-+	cfg->ipcfg[1].entry[0].ipaddr	= IPIV(192,168,1,200);
-+	cfg->ipcfg[1].entry[0].netmask	= IPIV(255,255,255,0);
-+#endif
-+
-+#if 1
-+	cfg->xport.total = 0;
-+#else
-+	cfg->xport.total = 4;
-+
-+	// H.323/H.225 Call setup
-+	cfg->xport.entry[0].protocol = IPPROTO_TCP;
-+	cfg->xport.entry[0].sport_start = 0;
-+	cfg->xport.entry[0].sport_end = 0;
-+	cfg->xport.entry[0].dport_start = 1720;
-+	cfg->xport.entry[0].dport_end = 1720;
-+	cfg->xport.entry[1].protocol = IPPROTO_TCP;
-+	cfg->xport.entry[1].sport_start = 1720;
-+	cfg->xport.entry[1].sport_end = 1720;
-+	cfg->xport.entry[1].dport_start = 0;
-+	cfg->xport.entry[1].dport_end = 0;
-+
-+	// RAS Setup
-+	cfg->xport.entry[2].protocol = IPPROTO_UDP;
-+	cfg->xport.entry[2].sport_start = 0;
-+	cfg->xport.entry[2].sport_end = 0;
-+	cfg->xport.entry[2].dport_start = 1719;
-+	cfg->xport.entry[2].dport_end = 1719;
-+	cfg->xport.entry[3].protocol = IPPROTO_UDP;
-+	cfg->xport.entry[3].sport_start = 1719;
-+	cfg->xport.entry[3].sport_end = 1719;
-+	cfg->xport.entry[3].dport_start = 0;
-+	cfg->xport.entry[3].dport_end = 0;
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+	mrxcr0.bits32 = 0;
-+	mrxcr1.bits32 = 0;
-+	mrxcr2.bits32 = 0;
-+	mrxcr0.bits.port = 1;
-+	mrxcr0.bits.l3 = 1;
-+	mrxcr0.bits.l4 = 1;
-+	mrxcr1.bits.sip = 1;
-+	mrxcr1.bits.dip = 1;
-+	mrxcr1.bits.l4_byte0_15 = 0x0f;	// Byte 0-3
-+	mrxcr0.bits.sprx = 3;
-+
-+	rc = mac_set_rule_reg(cfg->lan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+	if (rc < 0)
-+	{
-+		nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->tcp_udp_rule_id);
-+	}
-+
-+	if (cfg->lan_port != cfg->wan_port)
-+	{
-+		rc = mac_set_rule_reg(cfg->wan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+		if (rc < 0)
-+		{
-+			nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->tcp_udp_rule_id);
-+		}
-+	}
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT_GRE
-+	mrxcr0.bits32 = 0;
-+	mrxcr1.bits32 = 0;
-+	mrxcr2.bits32 = 0;
-+	mrxcr0.bits.port = 1;
-+	mrxcr0.bits.l3 = 1;
-+	mrxcr0.bits.l4 = 1;
-+	mrxcr1.bits.sip = 1;
-+	mrxcr1.bits.dip = 1;
-+	mrxcr1.bits.l4_byte0_15 = 0xcc;	// Byte 2, 3, 6, 7
-+	mrxcr0.bits.sprx = 4;			// see GMAC driver about SPR
-+
-+	rc = mac_set_rule_reg(cfg->lan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+	if (rc < 0)
-+	{
-+		nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->gre_rule_id);
-+	}
-+
-+	if (cfg->lan_port != cfg->wan_port)
-+	{
-+		rc = mac_set_rule_reg(cfg->wan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+		if (rc < 0)
-+		{
-+			nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->gre_rule_id);
-+		}
-+	}
-+#endif
-+
-+#ifdef SL351x_NAT_TEST_BY_SMARTBITS
-+	nat_init_test_entry();
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+* nat_build_keys
-+*	Note: To call this routine, the key->rule_id MUST be zero
-+*----------------------------------------------------------------------*/
-+static inline int nat_build_keys(NAT_KEY_T *key)
-+{
-+	return hash_gen_crc16((unsigned char *)key, NAT_KEY_SIZE) & HASH_BITS_MASK;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gre_build_keys
-+*	Note: To call this routine, the key->rule_id MUST be zero
-+*----------------------------------------------------------------------*/
-+static inline int gre_build_keys(GRE_KEY_T *key)
-+{
-+	return hash_gen_crc16((unsigned char *)key, GRE_KEY_SIZE) & HASH_BITS_MASK;
-+}
-+
-+/*----------------------------------------------------------------------
-+* nat_write_hash_entry
-+*----------------------------------------------------------------------*/
-+static inline int nat_write_hash_entry(int index, void *hash_entry)
-+{
-+	int		i;
-+	u32		*srcep, *destp, *destp2;
-+
-+	srcep = (u32 *)hash_entry;
-+	destp = destp2 = (u32 *)&hash_tables[index][0];
-+
-+	for (i=0; i<(NAT_HASH_ENTRY_SIZE/sizeof(u32)); i++)
-+		*destp++ = *srcep++;
-+
-+	consistent_sync(destp2, NAT_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gre_write_hash_entry
-+*----------------------------------------------------------------------*/
-+static inline int gre_write_hash_entry(int index, void *hash_entry)
-+{
-+	int		i;
-+	u32		*srcep, *destp, *destp2;
-+
-+	srcep = (u32 *)hash_entry;
-+	destp = destp2 = (u32 *)&hash_tables[index][0];
-+
-+	for (i=0; i<(GRE_HASH_ENTRY_SIZE/sizeof(u32)); i++)
-+		*destp++ = *srcep++;
-+
-+	consistent_sync(destp2, GRE_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_find_ipcfg
-+*	return NULL if not found
-+*----------------------------------------------------------------------*/
-+static NAT_IP_ENTRY_T *sl351x_nat_find_ipcfg(u32 ipaddr, int port)
-+{
-+	int				i;
-+	NAT_IP_ENTRY_T	*ipcfg;
-+
-+	ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port].entry[0];
-+	for (i=0; iipaddr)
-+		{
-+			return ipcfg;
-+		}
-+	}
-+	return NULL;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_assign_qid
-+*----------------------------------------------------------------------*/
-+static int sl351x_nat_assign_qid(u8 proto, u32 sip, u32 dip, u16 sport, u16 dport)
-+{
-+	int 				i, total, qid;
-+	NAT_WRULE_ENTRY_T	*entry;
-+
-+	for (qid = 0; qidprotocol || entry->protocol==proto)
-+			{
-+				//if (!entry->sip_start && !entry->dip_start && !entry->sport_start && !entry->dport_start)
-+				//	continue; // UI take care
-+				if (entry->sip_start && !((sip >= entry->sip_start) &&
-+									   (sip <= entry->sip_end)))
-+					continue;
-+				if (entry->dip_start && !((dip >= entry->dip_start) &&
-+									   (dip <= entry->dip_end)))
-+					continue;
-+				if (entry->sport_start && !((sport >= entry->sport_start) &&
-+									   (sport <= entry->sport_end)))
-+					continue;
-+				if (entry->dport_start && !((dport >= entry->dport_start)
-+					 			       && (dport <= entry->dport_end)))
-+					continue;
-+				return qid;
-+			}
-+		}
-+	}
-+	return nat_cfg.default_hw_txq;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_input
-+*	Handle NAT input frames
-+*	Called by SL351x Driver - Handle Default Rx Queue
-+*	Notes: The caller must make sure that the l3off & l4offset should not be zero.
-+*	SL351x NAT Frames should meet the following conditions:
-+*	1. TCP or UDP frame
-+*	2. Cannot be special ALGs ports which TCP/UDP data is updated
-+*	3. LAN-IN Frames:
-+*		Source IP is in the LAN subnet and Destination is not in the LAN subnet
-+*	4. WAN-IN Frames
-+*		Destination IP is in the WAN port IP
-+*
-+*	Example Ports
-+*	1. TCP/UDP data is updated
-+*		(a) FTP Control Packet
-+*		(b) VoIP Packets
-+*		(c) etc. (add in future)
-+*	2. UDP Low packet rate, not worth
-+*		(b) TFTP Destination Port is 69
-+*		(b) DNS  53
-+*		(c) NTP  123
-+*		(d) etc. (add in future)
-+*----------------------------------------------------------------------*/
-+void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off)
-+{
-+	int 				i, found;
-+	u32					sip, dip;
-+	u16					sport, dport;
-+	struct ethhdr		*ether_hdr;
-+	struct iphdr		*ip_hdr;
-+	struct tcphdr		*tcp_hdr;
-+	struct pppoe_hdr	*pppoe_hdr;
-+	NAT_CB_T			*nat_cb;
-+	u8					proto, pppoe_frame=0;
-+	NAT_CFG_T			*cfg;
-+	u16					ppp_proto;
-+	NAT_IP_ENTRY_T		*ipcfg;
-+	NAT_XPORT_ENTRY_T	*xentry;
-+	GRE_PKTHDR_T		*gre_hdr;
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+	u16 				*port_ptr;
-+#endif
-+
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+	if (!cfg->enabled || !cfg->ipcfg[port].total)
-+		return;
-+
-+	ip_hdr = (struct iphdr *)&(skb->data[(u32)l3off]);
-+	proto = ip_hdr->protocol;
-+
-+	tcp_hdr = (struct tcphdr *)&(skb->data[(u32)l4off]);
-+	gre_hdr = (GRE_PKTHDR_T *)tcp_hdr;
-+	sport = ntohs(tcp_hdr->source);
-+	dport = ntohs(tcp_hdr->dest);
-+
-+	sip = ntohl(ip_hdr->saddr);
-+	dip = ntohl(ip_hdr->daddr);
-+
-+	if (dip == IPIV(255,255,255,255))
-+		return;
-+
-+	if (port == cfg->lan_port)
-+	{
-+		ipcfg = (NAT_IP_ENTRY_T *)&cfg->ipcfg[port].entry[0];
-+		for (i=0, found=0; iipcfg[port].total; i++, ipcfg++)
-+		{
-+			u32 subnet = ipcfg->ipaddr & ipcfg->netmask;
-+			if (((sip & ipcfg->netmask) == subnet) &&
-+				((dip & ipcfg->netmask) != subnet))
-+			{
-+				found = 1;
-+				break;
-+			}
-+		}
-+		if (!found)
-+			return;
-+	}
-+	else
-+	{
-+#ifndef _NOT_CHECK_SIP_DIP	// enable it if know and get the wan ip address
-+		if (!sl351x_nat_find_ipcfg(dip, port))
-+		{
-+			printk("WAN->LAN Incorrect Dip %d.%d.%d.%d\n", HIPQUAD(dip));
-+			return;
-+		}
-+#endif
-+		ether_hdr = (struct ethhdr *)skb->data;
-+		pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
-+		ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
-+		if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES)	// 0x8864
-+			&& ppp_proto == __constant_htons(PPP_IP) )				// 0x21
-+		{
-+			pppoe_frame = 1;
-+		}
-+	}
-+
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+	if (proto == IPPROTO_TCP)
-+	{
-+#ifdef	NAT_DEBUG_MSG
-+		nat_printf("From   GMAC-%d: 0x%-4X TCP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
-+				port, ntohs(ip_hdr->id),
-+				NIPQUAD(ip_hdr->saddr), sport,
-+				NIPQUAD(ip_hdr->daddr), dport);
-+		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
-+		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
-+		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
-+		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
-+		nat_printf("\n");
-+#endif
-+		// if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST))
-+		if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN))
-+		{
-+			return;
-+		}
-+		port_ptr = fixed_tcp_port_list;
-+		for (i=0; *port_ptr; i++, port_ptr++)
-+		{
-+			if (sport == *port_ptr || dport == *port_ptr)
-+				return;
-+		}
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+		port_ptr = dynamic_tcp_port_list;
-+		for (i=0; *port_ptr; i++, port_ptr++)
-+		{
-+			if (sport == *port_ptr || dport == *port_ptr)
-+				return;
-+		}
-+#endif
-+	}
-+	else if (proto == IPPROTO_UDP)
-+	{
-+#ifdef	NAT_DEBUG_MSG
-+		nat_printf("From   GMAC-%d: 0x%-4X UDP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
-+				port, ntohs(ip_hdr->id),
-+				NIPQUAD(ip_hdr->saddr), sport,
-+				NIPQUAD(ip_hdr->daddr), dport);
-+		nat_printf("\n");
-+#endif
-+		port_ptr = fixed_udp_port_list;
-+		for (i=0; *port_ptr; i++, port_ptr++)
-+		{
-+			if (sport == *port_ptr || dport == *port_ptr)
-+				return;
-+		}
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+		port_ptr = dynamic_udp_port_list;
-+		for (i=0; *port_ptr; i++, port_ptr++)
-+		{
-+			if (sport == *port_ptr || dport == *port_ptr)
-+				return;
-+		}
-+#endif
-+	}
-+	else
-+#endif	// CONFIG_SL351x_NAT_TCP_UDP
-+#ifdef CONFIG_SL351x_NAT_GRE
-+	if (proto == IPPROTO_GRE)
-+	{
-+		if (gre_hdr->protocol != GRE_PROTOCOL_SWAP)
-+			return;
-+#ifdef	NAT_DEBUG_MSG
-+		nat_printf("From   GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
-+				port, ntohs(ip_hdr->id),
-+				NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
-+				NIPQUAD(ip_hdr->daddr));
-+		nat_printf("\n");
-+#endif
-+	}
-+	else
-+#endif
-+		return;
-+
-+
-+	// check xport list
-+	xentry = (NAT_XPORT_ENTRY_T *)&cfg->xport.entry[0];
-+	for (i=0; ixport.total; i++, xentry++)
-+	{
-+		if (!xentry->protocol || xentry->protocol == proto)
-+		{
-+			//if (!xentry->sport_start && !xentry->dport_start) // UI take care
-+			//	continue;
-+			if (xentry->sport_start && !((sport >= xentry->sport_start) &&
-+									   (sport <= xentry->sport_end)))
-+				continue;
-+			if (xentry->dport_start && !((dport >= xentry->dport_start)
-+					 			       && (dport <= xentry->dport_end)))
-+				continue;
-+			return;
-+		}
-+	}
-+
-+	nat_cb = NAT_SKB_CB(skb);
-+	if (((u32)nat_cb & 3))
-+	{
-+		nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
-+		return;
-+	}
-+	nat_cb->tag = NAT_CB_TAG;
-+	memcpy(nat_cb->sa, skb->data+6, 6);
-+	nat_cb->sip = ip_hdr->saddr;
-+	nat_cb->dip = ip_hdr->daddr;
-+	if (proto == IPPROTO_GRE)
-+	{
-+		nat_cb->sport = gre_hdr->protocol;
-+		nat_cb->dport = gre_hdr->call_id;
-+	}
-+	else
-+	{
-+		nat_cb->sport = tcp_hdr->source;
-+		nat_cb->dport = tcp_hdr->dest;
-+	}
-+	nat_cb->pppoe_frame = pppoe_frame;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_output
-+*	Handle NAT output frames
-+*	Called by SL351x Driver - Transmit
-+*
-+*	1. If not SL351x NAT frames, return FALSE
-+*	2. LAN-to-WAN frames
-+*		(1) Sip must be WAN IP
-+*	3. If TCP SY/RST/FIN frame, return
-+*	4. Build the hash key and get the hash index
-+*	5. If V-Bit is ON, return.
-+*	6. Write hash entry and validate it
-+*
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_output(struct sk_buff *skb, int port)
-+{
-+	struct iphdr		*ip_hdr;
-+	u8					proto;
-+	NAT_CB_T			*nat_cb;
-+
-+	nat_cb = NAT_SKB_CB(skb);
-+	if (nat_cb->tag != NAT_CB_TAG)
-+		return 0;
-+
-+	if (((u32)nat_cb & 3))
-+	{
-+		nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
-+		return 0;
-+	}
-+	ip_hdr = (struct iphdr *)skb->h.ipiph;
-+	proto = ip_hdr->protocol;
-+
-+	switch (proto)
-+	{
-+		case IPPROTO_TCP:
-+		case IPPROTO_UDP:
-+			return sl351x_nat_tcp_udp_output(skb, port);
-+		case IPPROTO_GRE:
-+			return sl351x_nat_gre_output(skb, port);
-+	}
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_tcp_udp_output
-+*	Handle NAT TCP/UDP output frames
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port)
-+{
-+	u32					sip, dip;
-+	struct ethhdr		*ether_hdr;
-+	struct iphdr		*ip_hdr;
-+	struct tcphdr		*tcp_hdr;
-+	struct pppoe_hdr	*pppoe_hdr;
-+	NAT_CB_T			*nat_cb;
-+	NAT_CFG_T			*cfg;
-+	u8					proto;
-+	u16					sport, dport, ppp_proto;
-+	u32					hash_data[HASH_MAX_DWORDS];
-+	NAT_HASH_ENTRY_T	*hash_entry;
-+	int					hash_index;
-+	struct ip_conntrack *nat_ip_conntrack;
-+	enum ip_conntrack_info ctinfo;
-+
-+	nat_cb = NAT_SKB_CB(skb);
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+
-+	ether_hdr = (struct ethhdr *)skb->data;
-+	ip_hdr = (struct iphdr *)skb->h.ipiph;
-+	tcp_hdr = (struct tcphdr *)((u32)ip_hdr + (ip_hdr->ihl<<2));
-+	sip = ntohl(ip_hdr->saddr);
-+	dip = ntohl(ip_hdr->daddr);
-+	proto = ip_hdr->protocol;
-+	sport = ntohs(tcp_hdr->source);
-+	dport = ntohs(tcp_hdr->dest);
-+
-+#ifdef	NAT_DEBUG_MSG
-+	{
-+		nat_printf("To   GMAC-%d: 0x%-4X [%d] %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
-+				port, ntohs(ip_hdr->id), proto,
-+				NIPQUAD(ip_hdr->saddr), sport,
-+				NIPQUAD(ip_hdr->daddr), dport);
-+		if (proto == IPPROTO_TCP)
-+		{
-+			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
-+			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
-+			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
-+			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
-+		}
-+		nat_printf("\n");
-+	}
-+#endif
-+	nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
-+	if (!nat_ip_conntrack)
-+	{
-+		nat_printf("IP conntrack info is not found!\n");
-+		return 0;
-+	}
-+	// nat_printf("nat_ip_conntrack = 0x%x, status=0x%lx, ctinfo=%d\n", (u32)nat_ip_conntrack, nat_ip_conntrack->status, ctinfo);
-+	// if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
-+	if (nat_ip_conntrack->helper)
-+	{
-+		nat_printf("Sport=%d Dport=%d master=0x%x, helper=0x%x\n", sport, dport, (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
-+		return 0;
-+	}
-+
-+	//if (proto == IPPROTO_TCP && !(nat_ip_conntrack->status & IPS_ASSURED))
-+	//	return 0;
-+
-+#ifdef	NAT_DEBUG_MSG
-+	nat_printf("nat_ip_conntrack=0x%x, nat_cb->state=%d\n", (u32)nat_ip_conntrack, nat_cb->state);
-+	nat_printf("lan2wan_hash_index=%d,  wan2lan_hash_index=%d\n", nat_ip_conntrack->lan2wan_hash_index, nat_ip_conntrack->wan2lan_hash_index);
-+	nat_printf("lan2wan_collision=%d, wan2lan_collision=%d\n", nat_ip_conntrack->lan2wan_collision, nat_ip_conntrack->wan2lan_collision);
-+#endif
-+	if (proto == IPPROTO_TCP)
-+	{
-+		if (nat_cb->state >= TCP_CONNTRACK_FIN_WAIT && nat_cb->state <= TCP_CONNTRACK_CLOSE)
-+		{
-+			if 	(nat_ip_conntrack->lan2wan_hash_index)
-+			{
-+#ifdef	NAT_DEBUG_MSG
-+				nat_printf("Invalidate LAN->WAN hash entry %d\n", nat_ip_conntrack->lan2wan_hash_index - 1);
-+#endif
-+				hash_nat_disable_owner(nat_ip_conntrack->lan2wan_hash_index - 1);
-+				hash_invalidate_entry(nat_ip_conntrack->lan2wan_hash_index - 1);
-+				nat_ip_conntrack->lan2wan_hash_index = 0;
-+			}
-+			if 	(nat_ip_conntrack->wan2lan_hash_index)
-+			{
-+#ifdef	NAT_DEBUG_MSG
-+				nat_printf("Invalidate WAN->LAN hash entry %d\n", nat_ip_conntrack->wan2lan_hash_index - 1);
-+#endif
-+				hash_nat_disable_owner(nat_ip_conntrack->wan2lan_hash_index - 1);
-+				hash_invalidate_entry(nat_ip_conntrack->wan2lan_hash_index - 1);
-+				nat_ip_conntrack->wan2lan_hash_index = 0;
-+			}
-+			return 0;
-+
-+		}
-+		else if (nat_cb->state != TCP_CONNTRACK_ESTABLISHED)
-+		{
-+			return 0;
-+		}
-+	}
-+	if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST)))
-+	// if (proto == IPPROTO_TCP &&  (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN)))
-+		return 0;
-+
-+	hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
-+	if (port == cfg->wan_port)	// LAN-to-WAN
-+	{
-+		if (nat_ip_conntrack->lan2wan_hash_index || nat_ip_conntrack->lan2wan_collision)
-+			return 0;
-+#ifndef _NOT_CHECK_SIP_DIP	// enable it if know and get the wan ip address
-+		if (!sl351x_nat_find_ipcfg(sip, port))
-+		{
-+			printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
-+			return 0;
-+		}
-+#endif
-+		// Note: unused fields (including rule_id) MUST be zero
-+		hash_entry->key.Ethertype 	= 0;
-+		hash_entry->key.port_id 	= cfg->lan_port;
-+		hash_entry->key.rule_id 	= 0;
-+		hash_entry->key.ip_protocol = proto;
-+		hash_entry->key.reserved1 	= 0;
-+		hash_entry->key.reserved2 	= 0;
-+		hash_entry->key.sip 		= ntohl(nat_cb->sip);
-+		hash_entry->key.dip 		= ntohl(nat_cb->dip);
-+		hash_entry->key.sport 		= nat_cb->sport;
-+		hash_entry->key.dport 		= nat_cb->dport;
-+
-+		hash_index = nat_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
-+		if (hash_get_nat_owner_flag(hash_index))
-+			return 0;
-+#endif
-+		if (hash_get_valid_flag(hash_index))
-+		{
-+			nat_ip_conntrack->lan2wan_collision = 1;
-+			nat_collision++;
-+#if 0
-+			if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
-+			{
-+				if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
-+				{
-+   					hash_nat_disable_owner(hash_index);
-+ 					hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
-+ 					// nat_printf("Invalidate nat hash entry %d\n", hash_index);
-+ 				}
-+			}
-+#endif
-+			return 0;
-+		}
-+
-+		// write hash entry
-+		hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+		memcpy(hash_entry->param.da, skb->data, 6);
-+		memcpy(hash_entry->param.sa, skb->data+6, 6);
-+		hash_entry->param.Sip = sip;
-+		hash_entry->param.Dip = dip;
-+		hash_entry->param.Sport = sport;
-+		hash_entry->param.Dport = dport;
-+		hash_entry->param.vlan = 0;
-+		hash_entry->param.sw_id = 0;
-+		hash_entry->param.mtu = 0;
-+		// check PPPoE
-+		pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
-+		ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
-+		if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES)	// 0x8864
-+			&& ppp_proto == __constant_htons(PPP_IP) )				// 0x21
-+		{
-+			hash_entry->action.dword = NAT_PPPOE_LAN2WAN_ACTIONS;
-+			hash_entry->param.pppoe = htons(pppoe_hdr->sid);
-+		}
-+		else
-+		{
-+			hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
-+			hash_entry->param.pppoe = 0;
-+		}
-+		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
-+		hash_entry->action.bits.dest_qid +=	(cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+		hash_entry->tmo.counter = hash_entry->tmo.interval =
-+						(proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
-+		nat_write_hash_entry(hash_index, hash_entry);
-+		// nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
-+		// hash_dump_entry(hash_index);
-+		hash_nat_enable_owner(hash_index);
-+		hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+ 		nat_ip_conntrack->lan2wan_hash_index = hash_index + 1;
-+ 		nat_ip_conntrack->hw_nat |= 1;
-+		return 0;
-+	}
-+	else // WAN-to-LAN
-+	{
-+		if (nat_ip_conntrack->wan2lan_hash_index || nat_ip_conntrack->wan2lan_collision)
-+			return 0;
-+
-+		// Note: unused fields (including rule_id) MUST be zero
-+		hash_entry->key.Ethertype 	= 0;
-+		hash_entry->key.port_id 	= cfg->wan_port;
-+		hash_entry->key.rule_id 	= 0;
-+		hash_entry->key.ip_protocol = proto;
-+		hash_entry->key.reserved1 	= 0;
-+		hash_entry->key.reserved2 	= 0;
-+		hash_entry->key.sip 		= ntohl(nat_cb->sip);
-+		hash_entry->key.dip 		= ntohl(nat_cb->dip);
-+		hash_entry->key.sport 		= nat_cb->sport;
-+		hash_entry->key.dport 		= nat_cb->dport;
-+
-+		hash_index = nat_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
-+		if (hash_get_nat_owner_flag(hash_index))
-+			return 0;
-+#endif
-+		if (hash_get_valid_flag(hash_index))
-+		{
-+			nat_ip_conntrack->wan2lan_collision = 1;
-+			nat_collision++;
-+#if 0
-+			if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
-+			{
-+				if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
-+				{
-+   					hash_nat_disable_owner(hash_index);
-+ 					hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
-+  					// nat_printf("Invalidate nat hash entry %d\n", hash_index);
-+				}
-+			}
-+#endif
-+			return 0;
-+		}
-+
-+		// write hash entry
-+		hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+		memcpy(hash_entry->param.da, skb->data, 6);
-+		memcpy(hash_entry->param.sa, skb->data+6, 6);
-+		hash_entry->param.Sip = sip;
-+		hash_entry->param.Dip = dip;
-+		hash_entry->param.Sport = sport;
-+		hash_entry->param.Dport = dport;
-+		hash_entry->param.vlan = 0;
-+		hash_entry->param.pppoe = 0;
-+		hash_entry->param.sw_id = 0;
-+		hash_entry->param.mtu = 0;
-+		hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_WAN2LAN_ACTIONS : NAT_WAN2LAN_ACTIONS;
-+		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
-+		hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
-+		hash_entry->tmo.counter = hash_entry->tmo.interval =
-+						(proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
-+		nat_write_hash_entry(hash_index, hash_entry);
-+
-+		// nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
-+		// hash_dump_entry(hash_index);
-+   		hash_nat_enable_owner(hash_index);
-+ 		hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
-+ 		nat_ip_conntrack->wan2lan_hash_index = hash_index + 1;
-+ 		nat_ip_conntrack->hw_nat |= 2;
-+		return 0;
-+	}
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_gre_output
-+*	Handle NAT GRE output frames
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_gre_output(struct sk_buff *skb, int port)
-+{
-+	u32					sip, dip;
-+	struct ethhdr		*ether_hdr;
-+	struct iphdr		*ip_hdr;
-+	struct pppoe_hdr	*pppoe_hdr;
-+	GRE_PKTHDR_T		*gre_hdr;
-+	NAT_CB_T			*nat_cb;
-+	NAT_CFG_T			*cfg;
-+	u16					ppp_proto;
-+	u32					hash_data[HASH_MAX_DWORDS];
-+	GRE_HASH_ENTRY_T	*hash_entry;
-+	int					hash_index;
-+	struct ip_conntrack *nat_ip_conntrack;
-+	enum ip_conntrack_info ctinfo;
-+
-+	nat_cb = NAT_SKB_CB(skb);
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+
-+	ether_hdr = (struct ethhdr *)skb->data;
-+	ip_hdr = (struct iphdr *)skb->h.ipiph;
-+	gre_hdr = (GRE_PKTHDR_T *)((u32)ip_hdr + (ip_hdr->ihl<<2));
-+	sip = ntohl(ip_hdr->saddr);
-+	dip = ntohl(ip_hdr->daddr);
-+
-+#ifdef	NAT_DEBUG_MSG
-+	{
-+		nat_printf("To   GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
-+				port, ntohs(ip_hdr->id),
-+				NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
-+				NIPQUAD(ip_hdr->daddr));
-+		nat_printf("\n");
-+	}
-+#endif
-+	nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
-+	if (nat_ip_conntrack)
-+	{
-+		// if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
-+		if (nat_ip_conntrack->helper)
-+		{
-+			nat_printf("GRE Call-ID=%d, master=0x%x, helper=0x%x\n", ntohs(gre_hdr->call_id), (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
-+			return 0;
-+		}
-+		if (!(nat_ip_conntrack->status & IPS_ASSURED))
-+			return 0;
-+	}
-+
-+	hash_entry = (GRE_HASH_ENTRY_T *)&hash_data;
-+	if (port == cfg->wan_port)	// LAN-to-WAN
-+	{
-+#ifdef _NOT_CHECK_SIP_DIP	// enable it if know and get the wan ip address
-+		if (!sl351x_nat_find_ipcfg(sip, port))
-+		{
-+			printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
-+			return 0;
-+		}
-+#endif
-+		// Note: unused fields (including rule_id) MUST be zero
-+		hash_entry->key.Ethertype 	= 0;
-+		hash_entry->key.port_id 	= cfg->lan_port;
-+		hash_entry->key.rule_id 	= 0;
-+		hash_entry->key.ip_protocol = IPPROTO_GRE;
-+		hash_entry->key.reserved1 	= 0;
-+		hash_entry->key.reserved2 	= 0;
-+		hash_entry->key.reserved3 	= 0;
-+		hash_entry->key.reserved4 	= 0;
-+		hash_entry->key.sip 		= ntohl(nat_cb->sip);
-+		hash_entry->key.dip 		= ntohl(nat_cb->dip);
-+		hash_entry->key.protocol	= nat_cb->sport;
-+		hash_entry->key.call_id 	= nat_cb->dport;
-+
-+		hash_index = gre_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
-+		if (hash_get_nat_owner_flag(hash_index))
-+			return 0;
-+#endif
-+		if (hash_get_valid_flag(hash_index))
-+		{
-+			return 0;
-+		}
-+
-+		// write hash entry
-+		hash_entry->key.rule_id = cfg->gre_rule_id;
-+		memcpy(hash_entry->param.da, skb->data, 6);
-+		memcpy(hash_entry->param.sa, skb->data+6, 6);
-+		hash_entry->param.Sip = sip;
-+		hash_entry->param.Dip = dip;
-+		hash_entry->param.Sport = 0;
-+		hash_entry->param.Dport = ntohs(gre_hdr->call_id);
-+		hash_entry->param.vlan = 0;
-+		hash_entry->param.sw_id = 0;
-+		hash_entry->param.mtu = 0;
-+		// check PPPoE
-+		pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
-+		ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
-+		if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES)	// 0x8864
-+			&& ppp_proto == __constant_htons(PPP_IP) )				// 0x21
-+		{
-+			hash_entry->action.dword = NAT_PPPOE_PPTP_LAN2WAN_ACTIONS;
-+			hash_entry->param.pppoe = htons(pppoe_hdr->sid);
-+		}
-+		else
-+		{
-+			hash_entry->action.dword = NAT_PPTP_LAN2WAN_ACTIONS;
-+			hash_entry->param.pppoe = 0;
-+		}
-+		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
-+		hash_entry->action.bits.dest_qid +=	(cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+		hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
-+		gre_write_hash_entry(hash_index, hash_entry);
-+		// nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
-+		// hash_dump_entry(hash_index);
-+		hash_nat_enable_owner(hash_index);
-+		hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+		return 0;
-+	}
-+	else // WAN-to-LAN
-+	{
-+		// Note: unused fields (including rule_id) MUST be zero
-+		hash_entry->key.Ethertype 	= 0;
-+		hash_entry->key.port_id 	= cfg->wan_port;
-+		hash_entry->key.rule_id 	= 0;
-+		hash_entry->key.ip_protocol = IPPROTO_GRE;
-+		hash_entry->key.reserved1 	= 0;
-+		hash_entry->key.reserved2 	= 0;
-+		hash_entry->key.reserved3 	= 0;
-+		hash_entry->key.reserved4 	= 0;
-+		hash_entry->key.sip 		= ntohl(nat_cb->sip);
-+		hash_entry->key.dip 		= ntohl(nat_cb->dip);
-+		hash_entry->key.protocol	= nat_cb->sport;
-+		hash_entry->key.call_id		= nat_cb->dport;
-+
-+		hash_index = gre_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
-+		if (hash_get_nat_owner_flag(hash_index))
-+			return 0;
-+#endif
-+		if (hash_get_valid_flag(hash_index))
-+		{
-+			return 0;
-+		}
-+
-+		// write hash entry
-+		hash_entry->key.rule_id = cfg->gre_rule_id;
-+		memcpy(hash_entry->param.da, skb->data, 6);
-+		memcpy(hash_entry->param.sa, skb->data+6, 6);
-+		hash_entry->param.Sip = sip;
-+		hash_entry->param.Dip = dip;
-+		hash_entry->param.Sport = 0;
-+		hash_entry->param.Dport = ntohs(gre_hdr->call_id);
-+		hash_entry->param.vlan = 0;
-+		hash_entry->param.pppoe = 0;
-+		hash_entry->param.sw_id = 0;
-+		hash_entry->param.mtu = 0;
-+		hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_PPTP_WAN2LAN_ACTIONS : NAT_PPTP_WAN2LAN_ACTIONS;
-+		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
-+		hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
-+		hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
-+		gre_write_hash_entry(hash_index, hash_entry);
-+
-+		// nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
-+		// hash_dump_entry(hash_index);
-+   		hash_nat_enable_owner(hash_index);
-+ 		hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
-+		return 0;
-+	}
-+	return 0;
-+}
-+
-+
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+/*----------------------------------------------------------------------
-+* sl_nat_add_port
-+*----------------------------------------------------------------------*/
-+void sl_nat_add_port(u8 protocol, u16 port)
-+{
-+	int 	i;
-+	u16		*port_ptr;
-+
-+	if (protocol == IPPROTO_TCP)
-+		port_ptr = dynamic_tcp_port_list;
-+	else if (protocol == IPPROTO_UDP)
-+		port_ptr = dynamic_udp_port_list;
-+	else
-+		return;
-+
-+	for (i=0; *port_ptr; i++)
-+	{
-+		if (port == *port_ptr)
-+			return;
-+		port_ptr++;
-+	}
-+	port_ptr++;
-+	*port_ptr = port;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl_nat_remove_port
-+*----------------------------------------------------------------------*/
-+void sl_nat_remove_port(u8 protocol, u16 port)
-+{
-+	int 	i, j;
-+	u16		*port_ptr, *next;
-+
-+	if (protocol == IPPROTO_TCP)
-+		port_ptr = dynamic_tcp_port_list;
-+	else if (protocol == IPPROTO_UDP)
-+		port_ptr = dynamic_udp_port_list;
-+	else
-+		return;
-+
-+	for (i=0; *port_ptr; i++, port_ptr++)
-+	{
-+		if (port == *port_ptr)
-+		{
-+			port_next = port_ptr + 1;
-+			for (j=i+1; *port_next; i++, j++)
-+				*port_ptr++ = *port_next++;
-+			*port_ptr = 0;
-+			return;
-+		}
-+	}
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_ioctl
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+	GMAC_INFO_T 		*tp = (GMAC_INFO_T *)dev->priv;
-+	int 				i, j, port_id;
-+    NATCMD_HDR_T		nat_hdr;
-+    NAT_REQ_E			ctrl;
-+	unsigned char		*req_datap;
-+	NAT_IP_ENTRY_T		*ipcfg;
-+	NAT_XPORT_ENTRY_T	*xport_entry;
-+	NAT_WRULE_ENTRY_T	*wrule_entry;
-+	unsigned int		qid;
-+
-+	if (copy_from_user((void *)&nat_hdr, rq->ifr_data, sizeof(nat_hdr)))
-+		return -EFAULT;
-+	req_datap = (unsigned char *)rq->ifr_data + sizeof(nat_hdr);
-+	port_id = tp->port_id;
-+	switch (nat_hdr.cmd) {
-+	case NATSSTATUS:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_STATUS_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.status, req_datap, sizeof(ctrl.status)))
-+			return -EFAULT;
-+		if (ctrl.status.enable != 0 && ctrl.status.enable != 1)
-+			return -EPERM;
-+		// sl351x_nat_set_enabled_flag(ctrl.status.enable);
-+		if (nat_cfg.enabled && (ctrl.status.enable == 0))
-+		{
-+			for (i=0; i= CONFIG_NAT_MAX_IP_NUM)
-+			return -E2BIG;
-+		if (copy_from_user((void *)&nat_cfg.ipcfg[port_id].entry[i], req_datap, sizeof(NAT_IPCFG_T)))
-+			return -EFAULT;
-+		nat_cfg.ipcfg[port_id].total++;
-+		break;
-+	case NATDELIP:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_IPCFG_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.ipcfg, req_datap, sizeof(ctrl.ipcfg)))
-+			return -EFAULT;
-+		ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port_id].entry[0];
-+		for (i=0; iipaddr == ctrl.ipcfg.entry.ipaddr)
-+			{
-+				NAT_IP_ENTRY_T *ipcfg_next;
-+				ipcfg_next = ipcfg + 1;
-+				for (j=i+1; j < nat_cfg.ipcfg[port_id].total; i++, j++)
-+				{
-+					memcpy((void *)ipcfg, (void *)ipcfg_next, sizeof(NAT_IP_ENTRY_T));
-+					ipcfg++;
-+					ipcfg_next++;
-+				}
-+				ipcfg->ipaddr = 0;
-+				ipcfg->netmask = 0;
-+				nat_cfg.ipcfg[port_id].total--;
-+				return 0;
-+			}
-+		}
-+		return -ENOENT;
-+	case NATGETIP:
-+		if (nat_hdr.len != sizeof(NAT_IPCFG_ALL_T))
-+			return -EPERM;
-+		if (copy_to_user(req_datap, (void *)&nat_cfg.ipcfg[port_id], sizeof(NAT_IPCFG_ALL_T)))
-+			return -EFAULT;
-+		break;
-+	case NATAXPORT:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_XPORT_T))
-+			return -EPERM;
-+		i = nat_cfg.xport.total;
-+		if (i >= CONFIG_NAT_MAX_XPORT)
-+			return -E2BIG;
-+		if (copy_from_user((void *)&nat_cfg.xport.entry[i], req_datap, sizeof(NAT_XPORT_T)))
-+			return -EFAULT;
-+		nat_cfg.xport.total++;
-+		break;
-+	case NATDXPORT:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_XPORT_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.xport, req_datap, sizeof(NAT_XPORT_T)))
-+			return -EFAULT;
-+		xport_entry = (NAT_XPORT_ENTRY_T *)&nat_cfg.xport.entry[0];
-+		for (i=0; i CONFIG_NAT_TXQ_NUM)
-+			return -EPERM;
-+		i = nat_cfg.wrule[qid].total;
-+		if (i >= CONFIG_NAT_MAX_WRULE)
-+			return -E2BIG;
-+		if (copy_from_user((void *)&nat_cfg.wrule[qid].entry[i], req_datap+sizeof(qid), sizeof(NAT_WRULE_T)))
-+			return -EFAULT;
-+		nat_cfg.wrule[qid].total++;
-+		break;
-+	case NATDWRULE:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_WRULE_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.wrule, req_datap, sizeof(NAT_WRULE_T)))
-+			return -EFAULT;
-+		qid = ctrl.wrule.qid;
-+		if (qid >= CONFIG_NAT_TXQ_NUM)
-+			return -EPERM;
-+		wrule_entry = (NAT_WRULE_ENTRY_T *)&nat_cfg.wrule[qid].entry[0];
-+		for (i=0; i= CONFIG_NAT_TXQ_NUM)
-+			return -EPERM;
-+		if (copy_to_user(req_datap, (void *)&nat_cfg.wrule[qid], sizeof(NAT_WRULE_ALL_T)))
-+			return -EFAULT;
-+		break;
-+	case NATSDEFQ:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_QUEUE_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&nat_cfg.default_hw_txq, req_datap, sizeof(u32)))
-+			return -EFAULT;
-+		break;
-+	case NATGDEFQ:
-+		if (nat_hdr.len != sizeof(NAT_QUEUE_T))
-+			return -EPERM;
-+		if (copy_to_user(req_datap, (void *)&nat_cfg.default_hw_txq, sizeof(u32)))
-+			return -EFAULT;
-+	case NATRMIPCFG:
-+		nat_cfg.ipcfg[port_id].total = 0;
-+		break;
-+	case NATTESTENTRY:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_TESTENTRY_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.init_entry, req_datap, sizeof(ctrl.init_entry)))
-+			return -EFAULT;
-+		if (ctrl.init_entry.init_enable != 0 && ctrl.init_entry.init_enable != 1)
-+			return -EPERM;
-+		nat_cfg.init_enabled = ctrl.init_entry.init_enable;
-+		break;
-+
-+	default:
-+		return -EPERM;
-+	}
-+
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* 	nat_init_test_entry
-+*	Initialize NAT test hash entries
-+*
-+*	SmartBits P1  -----> Lepus GMAC 0 --------------+
-+*													|
-+*													|
-+*             P3  <----- Lepus GMAC 1 -- HW TxQ0 <--+
-+*									  -- HW TxQ1 <--+
-+*									  -- HW TxQ2 <--+
-+*									  -- HW TxQ3 <--+
-+*
-+*	SmartBits P1  <----- Lepus GMAC 0 -- HW TxQ0 <--+
-+*									  -- HW TxQ1 <--+
-+*                                     -- HW TxQ2 <--+
-+*									  -- HW TxQ3 <--+
-+*													|
-+*													|
-+*             P3  -----> Lepus GMAC 1 --------------+
-+*
-+*   LAN GMAC0 <--------------------------------------------> GMAC1 WAN
-+*	192.168.[x].[y]:50 --> 168.95.[x].[y]:80 ---TXQ[y-1]---> 192.168.2.254:200[y] --> 168.95.[x].[y]:80
-+*	192.168.[x].[y]:50 <-- 168.95.[x].[y]:80 <--TXQ[y-1]---- 192.168.2.254:200[y] <-- 168.95.[x].[y]:80
-+*   where:
-+*		[x] : Packet Type
-+*		[y] : Tx Queue, 1 for TxQ0, 2 for TxQ1, 3 for TxQ2, 4 for TxQ3,
-+*
-+*
-+* Packet Type:
-+* 1. TCP Frames <---> TCP Frames
-+*   LAN GMAC0 <--------------------------------> GMAC1 WAN
-+*	192.168.1.1:50 --> 168.95.1.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.1.1:80
-+*	192.168.1.1:50 <-- 168.95.1.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.1.1:80
-+*
-+*	192.168.1.2:50 --> 168.95.1.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.1.2:80
-+*	192.168.1.2:50 <-- 168.95.1.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.1.2:80
-+*
-+*	192.168.1.3:50 --> 168.95.1.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.1.3:80
-+*	192.168.1.3:50 <-- 168.95.1.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.1.3:80
-+*
-+*	192.168.1.4:50 --> 168.95.1.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.1.4:80
-+*	192.168.1.4:50 <-- 168.95.1.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.1.4:80
-+*
-+* 2 TCP Frames <----> PPPoE + TCP Frames
-+*   LAN GMAC0 <--------------------------------> GMAC1 WAN
-+*	192.168.2.1:50 --> 168.95.2.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.2.1:80
-+*	192.168.2.1:50 <-- 168.95.2.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.2.1:80
-+*
-+*	192.168.2.2:50 --> 168.95.2.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.2.2:80
-+*	192.168.2.2:50 <-- 168.95.2.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.2.2:80
-+*
-+*	192.168.2.3:50 --> 168.95.2.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.2.3:80
-+*	192.168.2.3:50 <-- 168.95.2.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.2.3:80
-+*
-+*	192.168.2.4:50 --> 168.95.2.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.2.4:80
-+*	192.168.2.4:50 <-- 168.95.2.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.2.4:80
-+*
-+* 3 TCP Frames <----> VLAN + PPPoE + TCP Frames
-+*   LAN GMAC0 <--------------------------------> GMAC1 WAN
-+*	192.168.3.1:50 --> 168.95.3.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.3.1:80
-+*	192.168.3.1:50 <-- 168.95.3.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.3.1:80
-+*
-+*	192.168.3.2:50 --> 168.95.3.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.3.2:80
-+*	192.168.3.2:50 <-- 168.95.3.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.3.2:80
-+*
-+*	192.168.3.3:50 --> 168.95.3.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.3.3:80
-+*	192.168.3.3:50 <-- 168.95.3.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.3.3:80
-+*
-+*	192.168.3.4:50 --> 168.95.3.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.3.4:80
-+*	192.168.3.4:50 <-- 168.95.3.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.3.4:80
-+*
-+* 4 VLAN-A + TCP Frames <----> VLAN-B + PPPoE + TCP Frames
-+*   LAN GMAC0 <--------------------------------> GMAC1 WAN
-+*	192.168.4.1:50 --> 168.95.4.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.4.1:80
-+*	192.168.4.1:50 <-- 168.95.4.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.4.1:80
-+*
-+*	192.168.4.2:50 --> 168.95.4.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.4.2:80
-+*	192.168.4.2:50 <-- 168.95.4.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.4.2:80
-+*
-+*	192.168.4.3:50 --> 168.95.4.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.4.3:80
-+*	192.168.4.3:50 <-- 168.95.4.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.4.3:80
-+*
-+*	192.168.4.4:50 --> 168.95.4.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.4.4:80
-+*	192.168.4.4:50 <-- 168.95.4.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.4.4:80
-+*
-+*
-+*
-+*----------------------------------------------------------------------*/
-+#ifdef SL351x_NAT_TEST_BY_SMARTBITS
-+#define 	NAT_IPIV(a,b,c,d)			((a<<24)+(b<<16)+(c<<8)+d)
-+#define     NAT_TEST_CLIENT_IP 			NAT_IPIV(192,168,1,1)
-+#define     NAT_TEST_SERVER_IP 			NAT_IPIV(168,95,1,1)
-+#define		NAT_TEST_LAN_IP				NAT_IPIV(192,168,1,254)
-+#define		NAT_TEST_WAN_IP				NAT_IPIV(192,168,2,254)
-+#define     NAT_TEST_MAP_PORT_BASE		2001
-+#define     NAT_TEST_SPORT				50
-+#define     NAT_TEST_DPORT				80
-+#define     NAT_TEST_PROTOCOL			6
-+u8			nat_test_lan_target_da[6]={0x00,0x11,0x22,0x33,0x44,0x55};
-+u8			nat_test_wan_target_da[6]={0x00,0xaa,0xbb,0xcc,0xdd,0xee};
-+u8			nat_test_lan_my_da[6]={0x00,0x11,0x11,0x11,0x11,0x11};
-+u8			nat_test_wan_my_da[6]={0x00,0x22,0x22,0x22,0x22,0x22};
-+static void nat_init_test_entry(void)
-+{
-+	int 				i, j ;
-+	NAT_HASH_ENTRY_T	*hash_entry;
-+	u32					sip, dip;
-+	u32					hash_data[HASH_MAX_DWORDS];
-+	NAT_CFG_T			*cfg;
-+	int					hash_index;
-+
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+	hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
-+	hash_entry->key.Ethertype 	= 0;
-+	hash_entry->key.rule_id 	= 0;
-+	hash_entry->key.ip_protocol = IPPROTO_TCP;
-+	hash_entry->key.reserved1 	= 0;
-+	hash_entry->key.reserved2 	= 0;
-+	// hash_entry->key.sip 		= NAT_TEST_CLIENT_IP;
-+	// hash_entry->key.dip 		= NAT_TEST_SERVER_IP;
-+	hash_entry->key.sport 		= htons(NAT_TEST_SPORT);
-+	hash_entry->key.dport 		= htons(NAT_TEST_DPORT);
-+	hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+	hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
-+
-+	sip = NAT_TEST_CLIENT_IP;
-+	dip = NAT_TEST_SERVER_IP;
-+
-+	// Init TCP <------> TCP hash entries
-+	// LAN --> WAN
-+	// (1) TCP --> TCP
-+	// (2) TCP --> PPPoE + TCP
-+	// (3) TCP --> VLAN-B + PPPoE + TCP
-+	// (4) TCP + VLAN-A --> VLAN-B + PPPoE + TCP
-+	memcpy(hash_entry->param.da, nat_test_wan_target_da, 6);
-+	memcpy(hash_entry->param.sa, nat_test_wan_my_da, 6);
-+	hash_entry->key.port_id = cfg->lan_port;
-+	for (i=0; iaction.bits.dest_qid = i+2;
-+		}
-+		else
-+		{
-+			hash_entry->action.bits.dest_qid = i;
-+		}
-+		hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+		hash_entry->param.Sport = NAT_TEST_MAP_PORT_BASE+i;
-+		hash_entry->param.Dport = NAT_TEST_DPORT;
-+		for (j=0; j<4; j++)
-+		{
-+			hash_entry->key.sip = sip + i + j*0x100;
-+			hash_entry->key.dip = dip + i + j*0x100;
-+			hash_entry->param.Dip = hash_entry->key.dip;
-+			hash_entry->param.Sip = NAT_TEST_WAN_IP;
-+			switch (j)
-+			{
-+			case 0:
-+				hash_entry->action.bits.pppoe = 0;
-+				hash_entry->param.pppoe = 0;
-+				hash_entry->action.bits.vlan = 0;
-+				hash_entry->param.vlan = 0;
-+				break;
-+			case 1:
-+				hash_entry->action.bits.pppoe = 1;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 0;
-+				hash_entry->param.vlan = 0;
-+				break;
-+			case 2:
-+				hash_entry->action.bits.pppoe = 1;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 1;
-+				hash_entry->param.vlan = i+10;
-+				break;
-+			case 3:
-+				hash_entry->action.bits.pppoe = 1;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 1;
-+				hash_entry->param.vlan = i+10;
-+				break;
-+			}
-+			hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
-+			hash_index = nat_build_keys(&hash_entry->key);
-+			nat_write_hash_entry(hash_index, hash_entry);
-+			hash_nat_enable_owner(hash_index);
-+			hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+		}
-+	}
-+
-+
-+	// WAN --> LAN
-+	hash_entry->key.port_id 	= cfg->wan_port;
-+	hash_entry->key.sport 		= htons(NAT_TEST_DPORT);
-+	hash_entry->key.dport 		= htons(NAT_TEST_DPORT);
-+	hash_entry->key.rule_id		= cfg->tcp_udp_rule_id;
-+	hash_entry->action.dword	= NAT_WAN2LAN_ACTIONS;
-+	hash_entry->key.sport		= htons(NAT_TEST_DPORT);
-+	memcpy(hash_entry->param.da, nat_test_lan_target_da, 6);
-+	memcpy(hash_entry->param.sa, nat_test_lan_my_da, 6);
-+	for (i=0; ikey.dport = htons(NAT_TEST_MAP_PORT_BASE + i);
-+		if (i < 2)
-+		{
-+			hash_entry->action.bits.dest_qid = i+2;
-+		}
-+		else
-+		{
-+			hash_entry->action.bits.dest_qid = i;
-+		}
-+		hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+		hash_entry->param.Dport = NAT_TEST_SPORT;
-+		hash_entry->param.Sport = NAT_TEST_DPORT;
-+		hash_entry->param.da[5] = i;
-+		for (j=0; j<4; j++)
-+		{
-+			hash_entry->key.sip = (dip + i + j*0x100);
-+			hash_entry->key.dip = (NAT_TEST_WAN_IP);
-+			hash_entry->param.Sip = hash_entry->key.sip;
-+			hash_entry->param.Dip = sip + i + j*0x100;
-+			switch (j)
-+			{
-+			case 0:
-+				hash_entry->action.bits.pppoe = 0;
-+				hash_entry->param.pppoe = 0;
-+				hash_entry->action.bits.vlan = 0;
-+				hash_entry->param.vlan = 0;
-+				break;
-+			case 1:
-+				hash_entry->action.bits.pppoe = 2;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 0;
-+				hash_entry->param.vlan = 0;
-+				break;
-+			case 2:
-+				hash_entry->action.bits.pppoe = 2;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 2;
-+				hash_entry->param.vlan = i+5;
-+				break;
-+			case 3:
-+				hash_entry->action.bits.pppoe = 1;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 1;
-+				hash_entry->param.vlan = i+5;
-+				break;
-+			}
-+			hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
-+			hash_index = nat_build_keys(&hash_entry->key);
-+			nat_write_hash_entry(hash_index, hash_entry);
-+			hash_nat_enable_owner(hash_index);
-+			hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+		}
-+	}
-+}
-+#endif	// SL351x_NAT_TEST_BY_SMARTBITS
-+
-+#endif // CONFIG_SL351x_NAT
-+
---- /dev/null
-+++ b/drivers/net/sl351x_proc.c
-@@ -0,0 +1,578 @@
-+/****************************************************************************
-+* Copyright 2006 Storlink Corp.  All rights reserved.
-+*----------------------------------------------------------------------------
-+* Name			: sl351x_proc.c
-+* Description	:
-+*		Handle Proc Routines for Storlink SL351x Platform
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*	04/13/2006	Gary Chen	Create and implement
-+*
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#ifdef CONFIG_NETFILTER
-+// #include 
-+#endif
-+#include 
-+#include 
-+#include 
-+#ifdef CONFIG_SYSCTL
-+#include 
-+#endif
-+
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+
-+// #define PROC_DEBUG_MSG	1
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#ifdef CONFIG_PROC_FS
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#define	proc_printf					printk
-+#define SL351x_GMAC_PROC_NAME		"sl351x_gmac"
-+#define SL351x_NAT_PROC_NAME		"sl351x_nat"
-+#define SL351x_TOE_PROC_NAME		"sl351x_toe"
-+
-+/*----------------------------------------------------------------------
-+* Function Definition
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int nat_ct_open(struct inode *inode, struct file *file);
-+static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos);
-+static void nat_ct_seq_stop(struct seq_file *s, void *v);
-+static void *nat_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
-+static int nat_ct_seq_show(struct seq_file *s, void *v);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+static int toe_ct_open(struct inode *inode, struct file *file);
-+static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos);
-+static void toe_ct_seq_stop(struct seq_file *s, void *v);
-+static void *toe_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
-+static int toe_ct_seq_show(struct seq_file *s, void *v);
-+extern int sl351x_get_toe_conn_flag(int index);
-+extern struct toe_conn * sl351x_get_toe_conn_info(int index);
-+#endif
-+
-+static int gmac_ct_open(struct inode *inode, struct file *file);
-+static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos);
-+static void gmac_ct_seq_stop(struct seq_file *s, void *v);
-+static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
-+static int gmac_ct_seq_show(struct seq_file *s, void *v);
-+
-+
-+/*----------------------------------------------------------------------
-+* Data
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SYSCTL
-+// static struct ctl_table_header *nat_ct_sysctl_header;
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT
-+static struct seq_operations nat_ct_seq_ops = {
-+	.start = nat_ct_seq_start,
-+	.next  = nat_ct_seq_next,
-+	.stop  = nat_ct_seq_stop,
-+	.show  = nat_ct_seq_show
-+};
-+
-+static struct file_operations nat_file_ops= {
-+	.owner   = THIS_MODULE,
-+	.open    = nat_ct_open,
-+	.read    = seq_read,
-+	.llseek  = seq_lseek,
-+	.release = seq_release
-+};
-+#endif // CONFIG_SL351x_NAT
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+static struct seq_operations toe_ct_seq_ops = {
-+	.start = toe_ct_seq_start,
-+	.next  = toe_ct_seq_next,
-+	.stop  = toe_ct_seq_stop,
-+	.show  = toe_ct_seq_show
-+};
-+
-+static struct file_operations toe_file_ops= {
-+	.owner   = THIS_MODULE,
-+	.open    = toe_ct_open,
-+	.read    = seq_read,
-+	.llseek  = seq_lseek,
-+	.release = seq_release
-+};
-+#endif
-+
-+static struct seq_operations gmac_ct_seq_ops = {
-+	.start = gmac_ct_seq_start,
-+	.next  = gmac_ct_seq_next,
-+	.stop  = gmac_ct_seq_stop,
-+	.show  = gmac_ct_seq_show
-+};
-+
-+static struct file_operations gmac_file_ops= {
-+	.owner   = THIS_MODULE,
-+	.open    = gmac_ct_open,
-+	.read    = seq_read,
-+	.llseek  = seq_lseek,
-+	.release = seq_release
-+};
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+extern u32 gmac_workaround_cnt[4];
-+extern u32 gmac_short_frame_workaround_cnt[2];
-+#ifdef CONFIG_SL351x_NAT
-+	extern u32 sl351x_nat_workaround_cnt;
-+#endif
-+#endif
-+/*----------------------------------------------------------------------
-+* nat_ct_open
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int nat_ct_open(struct inode *inode, struct file *file)
-+{
-+	return seq_open(file, &nat_ct_seq_ops);
-+}
-+#endif // CONFIG_SL351x_NAT
-+/*----------------------------------------------------------------------
-+* nat_ct_seq_start
-+* find the first
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos)
-+{
-+	int i;
-+
-+	// proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+	for (i=*pos; iHASH_TOTAL_ENTRIES)
-+		return -ENOSPC;
-+
-+	idx--;
-+	nat_entry = (NAT_HASH_ENTRY_T *)&hash_tables[idx];
-+	gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
-+	if (nat_entry->key.ip_protocol == IPPROTO_GRE)
-+	{
-+		if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u\n",
-+					idx, gre_entry->key.port_id, gre_entry->key.ip_protocol,
-+					HIPQUAD(gre_entry->key.sip), ntohs(gre_entry->key.call_id),
-+					HIPQUAD(gre_entry->key.dip)))
-+			return -ENOSPC;
-+		if (seq_printf(s, "      PARAMETER: %u.%u.%u.%u -->%u.%u.%u.%u [%u] Timeout:%ds\n",
-+					HIPQUAD(gre_entry->param.Sip),
-+					HIPQUAD(gre_entry->param.Dip), gre_entry->param.Dport,
-+					gre_entry->tmo.counter))
-+			return -ENOSPC;
-+	}
-+	else
-+	{
-+		if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
-+					idx, nat_entry->key.port_id, nat_entry->key.ip_protocol,
-+					HIPQUAD(nat_entry->key.sip), ntohs(nat_entry->key.sport),
-+					HIPQUAD(nat_entry->key.dip), ntohs(nat_entry->key.dport)))
-+			return -ENOSPC;
-+		if (seq_printf(s, "      PARAMETER: %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u] Timeout:%ds\n",
-+					HIPQUAD(nat_entry->param.Sip), nat_entry->param.Sport,
-+					HIPQUAD(nat_entry->param.Dip), nat_entry->param.Dport,
-+					nat_entry->tmo.counter))
-+			return -ENOSPC;
-+	}
-+	return 0;
-+}
-+#endif // CONFIG_SL351x_NAT
-+
-+/*----------------------------------------------------------------------
-+* toe_ct_open
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static int toe_ct_open(struct inode *inode, struct file *file)
-+{
-+	return seq_open(file, &toe_ct_seq_ops);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* toe_ct_seq_start
-+* find the first
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos)
-+{
-+	int i;
-+
-+	// proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+	for (i=*pos; iTOE_TOE_QUEUE_NUM)
-+		return -ENOSPC;
-+
-+	idx--;
-+	toe_entry = (struct toe_conn *)sl351x_get_toe_conn_info(idx);
-+	if (!toe_entry)
-+		return -ENOSPC;
-+
-+	if (seq_printf(s, "%4d: Qid %d MAC-%d TCP %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
-+				idx, toe_entry->qid, toe_entry->gmac->port_id,
-+				NIPQUAD(toe_entry->saddr[0]), ntohs(toe_entry->source),
-+				NIPQUAD(toe_entry->daddr[0]), ntohs(toe_entry->dest)))
-+			return -ENOSPC;
-+	return 0;
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* gmac_ct_open
-+*----------------------------------------------------------------------*/
-+static int gmac_ct_open(struct inode *inode, struct file *file)
-+{
-+	return seq_open(file, &gmac_ct_seq_ops);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_start
-+* find the first
-+*----------------------------------------------------------------------*/
-+static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos)
-+{
-+	int i;
-+	i = (int)*pos + 1;;
-+
-+	if (i > 9)
-+		return NULL;
-+	else
-+		return (void *)i;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_stop
-+*----------------------------------------------------------------------*/
-+static void gmac_ct_seq_stop(struct seq_file *s, void *v)
-+{
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_next
-+*----------------------------------------------------------------------*/
-+static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
-+{
-+	int i;
-+
-+	// proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+
-+	(*pos)++;
-+	i = (int)*pos + 1;;
-+
-+	if (i > 9)
-+		return NULL;
-+	else
-+		return (void *)i;
-+}
-+
-+/*----------------------------------------------------------------------
-+* seq_dm_long
-+*----------------------------------------------------------------------*/
-+static void seq_dm_long(struct seq_file *s, u32 location, int length)
-+{
-+	u32		*start_p, *curr_p, *end_p;
-+	u32		*datap, data;
-+	int		i;
-+
-+	//if (length > 1024)
-+	//	length = 1024;
-+
-+	start_p = (u32 *)location;
-+	end_p = (u32 *)location + length;
-+	curr_p = (u32 *)((u32)location & 0xfffffff0);
-+	datap = (u32 *)location;
-+	while (curr_p < end_p)
-+	{
-+		cond_resched();
-+		seq_printf(s, "0x%08x: ",(u32)curr_p & 0xfffffff0);
-+		for (i=0; i<4; i++)
-+		{
-+			if (curr_p < start_p || curr_p >= end_p)
-+               seq_printf(s, "         ");
-+			else
-+			{
-+				data = *datap;
-+				seq_printf(s, "%08X ", data);
-+			}
-+			if (i==1)
-+              seq_printf(s, "- ");
-+
-+			curr_p++;
-+			datap++;
-+		}
-+        seq_printf(s, "\n");
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_show
-+*----------------------------------------------------------------------*/
-+static int gmac_ct_seq_show(struct seq_file *s, void *v)
-+{
-+	switch ((int)v)
-+	{
-+		case 1:
-+			seq_printf(s, "\nGMAC Global Registers\n");
-+			seq_dm_long(s, TOE_GLOBAL_BASE, 32);
-+			break;
-+		case 2:
-+			seq_printf(s, "\nGMAC Non-TOE Queue Header\n");
-+			seq_dm_long(s, TOE_NONTOE_QUE_HDR_BASE, 12);
-+			break;
-+		case 3:
-+			seq_printf(s, "\nGMAC TOE Queue Header\n");
-+			seq_dm_long(s, TOE_TOE_QUE_HDR_BASE, 12);
-+			break;
-+		case 4:
-+			seq_printf(s, "\nGMAC-0 DMA Registers\n");
-+			seq_dm_long(s, TOE_GMAC0_DMA_BASE, 52);
-+			break;
-+		case 5:
-+			seq_printf(s, "\nGMAC-0 Registers\n");
-+			seq_dm_long(s, TOE_GMAC0_BASE, 32);
-+			break;
-+		case 6:
-+			seq_printf(s, "\nGMAC-1 DMA Registers\n");
-+			seq_dm_long(s, TOE_GMAC1_DMA_BASE, 52);
-+			break;
-+		case 7:
-+			seq_printf(s, "\nGMAC-1 Registers\n");
-+			seq_dm_long(s, TOE_GMAC1_BASE, 32);
-+			break;
-+		case 8:
-+			seq_printf(s, "\nGLOBAL Registers\n");
-+			seq_dm_long(s, GMAC_GLOBAL_BASE_ADDR, 16);
-+			break;
-+		case 9:
-+#ifdef SL351x_GMAC_WORKAROUND
-+			seq_printf(s, "\nGMAC-0 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[0], gmac_workaround_cnt[1], gmac_short_frame_workaround_cnt[0]);
-+			seq_printf(s, "GMAC-1 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[2], gmac_workaround_cnt[3], gmac_short_frame_workaround_cnt[1]);
-+#ifdef CONFIG_SL351x_NAT
-+			seq_printf(s, "NAT Workaround: %u\n", sl351x_nat_workaround_cnt);
-+#endif
-+#endif
-+			break;
-+		default:
-+			return -ENOSPC;
-+	}
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* init
-+*----------------------------------------------------------------------*/
-+static int __init init(void)
-+{
-+	struct proc_dir_entry *proc_gmac=NULL;
-+
-+#ifdef CONFIG_SL351x_NAT
-+	struct proc_dir_entry *proc_nat=NULL;
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+	struct proc_dir_entry *proc_toe=NULL;
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+	// nat_ct_sysctl_header = NULL;
-+#endif
-+	proc_gmac = proc_net_fops_create(SL351x_GMAC_PROC_NAME, 0440, &gmac_file_ops);
-+	if (!proc_gmac) goto init_bad;
-+
-+#ifdef CONFIG_SL351x_NAT
-+	proc_nat = proc_net_fops_create(SL351x_NAT_PROC_NAME, 0440, &nat_file_ops);
-+	if (!proc_nat) goto init_bad;
-+#endif // CONFIG_SL351x_NAT
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+	proc_toe = proc_net_fops_create(SL351x_TOE_PROC_NAME, 0440, &toe_file_ops);
-+	if (!proc_toe) goto init_bad;
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+	// nat_ct_sysctl_header = register_sysctl_table(nat_ct_net_table, 0);
-+	// if (!nat_ct_sysctl_header) goto init_bad;
-+#endif
-+
-+	return 0;
-+
-+init_bad:
-+	if (proc_gmac) proc_net_remove(SL351x_GMAC_PROC_NAME);
-+
-+#ifdef CONFIG_SL351x_NAT
-+	if (proc_nat) proc_net_remove(SL351x_NAT_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+	if (proc_toe) proc_net_remove(SL351x_NAT_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+	// if (nat_ct_sysctl_header) unregister_sysctl_table(nat_ct_sysctl_header);
-+#endif
-+	proc_printf("SL351x NAT Proc: can't create proc or register sysctl.\n");
-+	return -ENOMEM;
-+}
-+
-+/*----------------------------------------------------------------------
-+* fini
-+*----------------------------------------------------------------------*/
-+static void __exit fini(void)
-+{
-+	proc_net_remove(SL351x_GMAC_PROC_NAME);
-+
-+#ifdef CONFIG_SL351x_NAT
-+	proc_net_remove(SL351x_NAT_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+	proc_net_remove(SL351x_TOE_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+	// unregister_sysctl_table(nat_ct_sysctl_header);
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+* module
-+*----------------------------------------------------------------------*/
-+module_init(init);
-+module_exit(fini);
-+
-+#endif	// CONFIG_PROC_FS
---- /dev/null
-+++ b/drivers/net/sl351x_toe.c
-@@ -0,0 +1,1083 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl351x_toe.c
-+* Description	:
-+*		Provide TOE routines for SL351x
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*				Xiaochong
-+*
-+****************************************************************************/
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+static int in_toe_isr;
-+static int toe_initialized=0;
-+
-+static struct toe_conn	toe_connections[TOE_TOE_QUEUE_NUM];
-+EXPORT_SYMBOL(toe_connections);
-+static __u32 toe_connection_bits[TOE_TOE_QUEUE_NUM/32] __attribute__ ((aligned(16)));
-+struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr, INTR_QHDR_T *intr_curr_desc);
-+
-+extern struct storlink_sysctl	storlink_ctl;
-+extern TOE_INFO_T toe_private_data;
-+extern spinlock_t gmac_fq_lock;
-+extern void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
-+extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
-+extern int hash_add_toe_entry(HASH_ENTRY_T *entry);
-+extern void toe_gmac_fill_free_q(void);
-+
-+#define _DEBUG_SKB_		1
-+#ifdef _DEBUG_SKB_
-+/*---------------------------------------------------------------------------
-+ * _debug_skb
-+ *-------------------------------------------------------------------------*/
-+static inline void _debug_skb(struct sk_buff *skb, GMAC_RXDESC_T *toe_curr_desc, u32 data)
-+{
-+	if ((u32)skb < 0x1000)
-+	{
-+		printk("%s skb=%x\n", __func__, (u32)skb);
-+		while(1);
-+	}
-+	REG32(__va(toe_curr_desc->word2.buf_adr)-SKB_RESERVE_BYTES) = data;
-+}
-+#else
-+#define _debug_skb(x, y, z)
-+#endif
-+
-+/*---------------------------------------------------------------------------
-+ * get_connection_seq_num
-+ *-------------------------------------------------------------------------*/
-+u32 get_connection_seq_num(unsigned short qid)
-+{
-+	TOE_QHDR_T	*toe_qhdr;
-+
-+	toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
-+	toe_qhdr += qid;
-+	return (u32)toe_qhdr->word3.seq_num;
-+}
-+EXPORT_SYMBOL(get_connection_seq_num);
-+
-+/*---------------------------------------------------------------------------
-+ * get_connection_ack_num
-+ *-------------------------------------------------------------------------*/
-+u32 get_connection_ack_num(unsigned short qid)
-+{
-+	TOE_QHDR_T	*toe_qhdr;
-+
-+	toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
-+	toe_qhdr += qid;
-+	return (u32)toe_qhdr->word4.ack_num;
-+}
-+EXPORT_SYMBOL(get_connection_ack_num);
-+
-+/*---------------------------------------------------------------------------
-+ * dump_toe_qhdr
-+ *-------------------------------------------------------------------------*/
-+void dump_toe_qhdr(TOE_QHDR_T *toe_qhdr)
-+{
-+	printk("TOE w1 %x, w2 %x, w3 %x\n", toe_qhdr->word1.bits32,
-+		toe_qhdr->word2.bits32, toe_qhdr->word3.bits32);
-+	printk("w4 %x, w5 %x, w6 %x\n", toe_qhdr->word4.bits32,
-+		toe_qhdr->word5.bits32, toe_qhdr->word6.bits32);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * dump_intrq_desc
-+ *-------------------------------------------------------------------------*/
-+void dump_intrq_desc(INTR_QHDR_T *intr_curr_desc)
-+{
-+	printk("INTR w0 %x, w1 %x, seq %x\n", intr_curr_desc->word0.bits32,
-+		intr_curr_desc->word1.bits32, intr_curr_desc->word2.bits32);
-+	printk("ack %x, w4 %x\n", intr_curr_desc->word3.bits32,
-+		intr_curr_desc->word4.bits32);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * This routine will initialize a TOE matching rule
-+ * called by SL351x GMAC driver.
-+ *-------------------------------------------------------------------------*/
-+void sl351x_toe_init(void)
-+{
-+	GMAC_MRxCR0_T	mrxcr0;
-+	GMAC_MRxCR1_T	mrxcr1;
-+	GMAC_MRxCR2_T	mrxcr2;
-+	int	rule, rc;
-+
-+	if (toe_initialized)
-+		return;
-+
-+	toe_initialized = 1;
-+
-+#ifndef CONFIG_SL351x_NAT
-+	mrxcr0.bits32 = 0;
-+	mrxcr1.bits32 = 0;
-+	mrxcr2.bits32 = 0;
-+	mrxcr0.bits.l3 = 1;
-+	mrxcr0.bits.l4 = 1;
-+	mrxcr1.bits.sip = 1;
-+	mrxcr1.bits.dip = 1;
-+	mrxcr1.bits.l4_byte0_15 = 0x0f;
-+	mrxcr0.bits.sprx = 1;
-+	rule = 0;
-+	rc = mac_set_rule_reg(0, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
-+						mrxcr2.bits32);
-+	if (rc<0) {
-+		printk("%s::Set MAC 0 rule fail!\n", __func__);
-+	}
-+	rc = mac_set_rule_reg(1, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
-+	     					mrxcr2.bits32);
-+	if (rc<0) {
-+		printk("%s::Set MAC 1 rule fail!\n", __func__);
-+	}
-+#endif // CONFIG_SL351x_NAT
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * dump_intrq_desc
-+ * assign an interrupt queue number to a give tcp queue
-+ *-------------------------------------------------------------------------*/
-+int get_interrupt_queue_id(int tcp_qid)
-+{
-+	return (int)(tcp_qid & 0x0003);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * reset_connection_index
-+ * reset the connection bit by given index
-+ *-------------------------------------------------------------------------*/
-+void reset_connection_index(__u8 index)
-+{
-+	__u32 mask = ~(0xffffffff & (1<< (index&0x1f)));
-+	toe_connection_bits[index>>5] = toe_connection_bits[index>>5] & mask;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * update_timer
-+ *-------------------------------------------------------------------------*/
-+void update_timer(struct toe_conn* connection)
-+{
-+//	if (time_before(jiffies, connection->last_rx_jiffies+3))
-+//	if ((jiffies + 0xffffffff - connection->last_rx_jiffies) & 0x3)
-+//	if (connection->last_rx_jiffies > jiffies)
-+//		printk("%s::jif %g, last_rx_jif %g\n", __func__, jiffies, connection->last_rx_jiffies);
-+/*	if ((long)(jiffies + 2)< 3) { // overflow...
-+		printk("%s::jiffies %x\n", __func__, jiffies);
-+	} */
-+//	if ((long)(jiffies - connection->last_rx_jiffies)< 2)
-+//		return;
-+	connection->last_rx_jiffies = jiffies;
-+	// gary chen mod_timer(&connection->rx_timer, jiffies+2);
-+	connection->rx_timer.expires = jiffies + 2;
-+	add_timer(&connection->rx_timer);
-+//	printk("%s::nt %x, lj %x\n", __func__, (jiffies+2), connection->last_rx_jiffies);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * gen_pure_ack
-+ *-------------------------------------------------------------------------*/
-+struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr,
-+INTR_QHDR_T *intr_curr_desc)
-+{
-+	struct sk_buff	*skb;
-+	struct iphdr	*ip_hdr;
-+	struct tcphdr	*tcp_hdr;
-+	struct ethhdr	*eth_hdr;
-+
-+	if ((skb= dev_alloc_skb(RX_BUF_SIZE))==NULL) {
-+		printk("%s::alloc pure ack fail!\n", __func__);
-+		return NULL;
-+	}
-+	skb_reserve(skb, RX_INSERT_BYTES);
-+	memset(skb->data, 0, 60);
-+
-+	eth_hdr = (struct ethhdr*)&(skb->data[0]);
-+	memcpy(eth_hdr, &connection->l2_hdr, sizeof(struct ethhdr));
-+
-+	ip_hdr = (struct iphdr*)&(skb->data[14]);
-+	ip_hdr->version = connection->ip_ver;
-+	ip_hdr->ihl = 20>>2;
-+	ip_hdr->tot_len = ntohs(40);
-+	ip_hdr->frag_off = htons(IP_DF);
-+	ip_hdr->ttl = 128;
-+	ip_hdr->protocol = 0x06;
-+	ip_hdr->saddr = connection->saddr[0];
-+	ip_hdr->daddr = connection->daddr[0];
-+//	printk("%s ip sa %x, da %x\n",
-+//		__func__, ntohl(ip_hdr->saddr), ntohl(ip_hdr->daddr));
-+
-+	tcp_hdr = (struct tcphdr*)&(skb->data[34]);
-+	tcp_hdr->source = connection->source;
-+	tcp_hdr->dest = connection->dest;
-+	if (intr_curr_desc) {
-+		tcp_hdr->seq = htonl(intr_curr_desc->word2.seq_num);
-+		tcp_hdr->ack_seq = htonl(intr_curr_desc->word3.ack_num);
-+		tcp_hdr->window = htons(intr_curr_desc->word0.bits.win_size);
-+	} else {
-+		tcp_hdr->seq = htonl(toe_qhdr->word3.seq_num);
-+		tcp_hdr->ack_seq = htonl(toe_qhdr->word4.ack_num);
-+		tcp_hdr->window = htons(toe_qhdr->word6.bits.WinSize);
-+	}
-+	tcp_hdr->ack = 1;
-+	tcp_hdr->doff = 20 >> 2;
-+#if 0
-+	if (!intr_curr_desc) {
-+		unsigned char byte;
-+		for (i=0; i<20; i++) {
-+			byte = skb->data[34+i];
-+			printk("%x ", byte);
-+		}
-+		printk("\n");
-+	}
-+#endif
-+	TCP_SKB_CB(skb)->connection = connection;
-+	return skb;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * connection_rx_timer
-+ *-------------------------------------------------------------------------*/
-+void connection_rx_timer(unsigned long *data)
-+{
-+	struct toe_conn	*connection = (struct toe_conn*)data;
-+	unsigned int	tcp_qid, toeq_wptr;
-+	unsigned int	pkt_size, desc_count;
-+	struct sk_buff	*skb;
-+	GMAC_RXDESC_T	*toe_curr_desc;
-+	TOE_QHDR_T	*toe_qhdr;
-+	struct net_device	*dev;
-+	unsigned long	conn_flags;
-+	DMA_RWPTR_T		toeq_rwptr;
-+	unsigned short	timeout_descs;
-+
-+	if (in_toe_isr)
-+		printk("%s::in_toe_isr=%d!\n", __func__, in_toe_isr);
-+
-+	if (connection) {
-+		/* should we disable gmac interrupt first? */
-+		if (!connection->gmac)
-+			printk("%s::conn gmac %x!\n", __func__, (u32)connection->gmac);
-+		local_irq_save(conn_flags);
-+		if (!spin_trylock(&connection->conn_lock)) {
-+			local_irq_restore(conn_flags);
-+			// timer should be updated by the toeq isr. So no need to update here.
-+			printk("%s::conn_lock is held by ISR!\n", __func__);
-+			return;
-+		}
-+		disable_irq(connection->gmac->irq);
-+
-+		/* disable hash entry and get toeq desc. */
-+		hash_set_valid_flag(connection->hash_entry_index, 0);
-+		do{} while(0);	/* wait until HW finish */
-+
-+		dev = connection->dev;
-+		if (!dev)
-+			printk("%s::conn dev NULL!\n", __func__);
-+		tcp_qid = connection->qid;
-+		toe_qhdr = (TOE_QHDR_T *)(TOE_TOE_QUE_HDR_BASE +
-+		              tcp_qid * sizeof(TOE_QHDR_T));
-+		toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+		toeq_wptr = toe_qhdr->word1.bits.wptr;
-+		timeout_descs = toeq_wptr - toeq_rwptr.bits.rptr;
-+
-+		if (toeq_rwptr.bits.rptr == toeq_wptr) {
-+			if (toe_qhdr->word5.bits32) {
-+				// shall we check toe_qhdr->word2.bits?
-+				skb = gen_pure_ack(connection, toe_qhdr, (INTR_QHDR_T *)NULL);
-+				skb_put(skb, 54);
-+				skb->dev = connection->dev;
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+				skb->protocol = eth_type_trans(skb, connection->dev);
-+				netif_rx(skb);
-+				connection->dev->last_rx = jiffies;
-+			}
-+		} else {
-+			while (toeq_rwptr.bits.rptr != toeq_rwptr.bits.wptr) {
-+				/* we just simply send those packets to tcp? */
-+				toe_curr_desc = (GMAC_RXDESC_T*)(toe_private_data.toe_desc_base[tcp_qid]
-+					+ toeq_rwptr.bits.rptr * sizeof(GMAC_RXDESC_T));
-+				connection->curr_desc = toe_curr_desc;
-+				if (toe_curr_desc->word3.bits.ctrl_flag) {
-+					printk("%s::ctrl flag! %x, conn rptr %d, to %d, jif %x, conn_jif %x\n",
-+						__func__, toe_curr_desc->word3.bits32,
-+						connection->toeq_rwptr.bits.rptr, timeout_descs,
-+						(u32)jiffies, (u32)connection->last_rx_jiffies);
-+				}
-+				desc_count = toe_curr_desc->word0.bits.desc_count;
-+				pkt_size = toe_curr_desc->word1.bits.byte_count;
-+				consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+					PCI_DMA_FROMDEVICE);
-+				skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
-+					SKB_RESERVE_BYTES));
-+				_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x02);
-+				connection->curr_rx_skb = skb;
-+				skb_reserve(skb, RX_INSERT_BYTES);
-+				skb_put(skb, pkt_size);
-+				skb->dev = dev;
-+				skb->protocol = eth_type_trans(skb, dev);
-+				{
-+					struct iphdr* ip_hdr = (struct iphdr*)&(skb->data[0]);
-+					if (toe_curr_desc->word3.bits.ctrl_flag)
-+						printk("%s::ip id %x\n", __func__, ntohs(ip_hdr->id));
-+				}
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+				netif_rx(skb);
-+				dev->last_rx = jiffies;
-+#if 0
-+				if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
-+					printk("%s::alloc buf fail!\n", __func__);
-+				}
-+				*(unsigned int*)(skb->data) = (unsigned int)skb;
-+				connection->curr_rx_skb = skb;
-+				skb_reserve(skb, SKB_RESERVE_BYTES);
-+				spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
-+				fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+				if (toe_private_data.fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
-+					mac_stop_txdma((struct net_device*)connection->dev);
-+					spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
-+					while(1);
-+				}
-+				fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + fq_rwptr.bits.wptr;
-+				fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+				fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+				SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+				toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+				spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
-+#endif
-+//				spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
-+				toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+				SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+//				spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
-+				connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
-+			}
-+			toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+//			toe_gmac_fill_free_q();
-+		}
-+		connection->last_rx_jiffies = jiffies;
-+		if (connection->status != TCP_CONN_CLOSED)
-+			mod_timer(&connection->rx_timer, jiffies+2);
-+		if (connection->status != TCP_CONN_ESTABLISHED)
-+			printk("%s::conn status %x\n", __func__, connection->status);
-+		hash_set_valid_flag(connection->hash_entry_index, 1);
-+		enable_irq(connection->gmac->irq);
-+		// Gary Chen spin_unlock_irqrestore(&connection->conn_lock, conn_flags);
-+	}
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * free_toeq_descs
-+ *-------------------------------------------------------------------------*/
-+void free_toeq_descs(int qid, TOE_INFO_T *toe)
-+{
-+	void	*desc_ptr;
-+
-+	desc_ptr = (void*)toe->toe_desc_base[qid];
-+	pci_free_consistent(NULL, TOE_TOE_DESC_NUM*sizeof(GMAC_RXDESC_T), desc_ptr,
-+	   (dma_addr_t)toe->toe_desc_base_dma[qid]);
-+	toe->toe_desc_base[qid] = 0;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * set_toeq_hdr
-+ *-------------------------------------------------------------------------*/
-+void set_toeq_hdr(struct toe_conn*	connection, TOE_INFO_T* toe, struct net_device *dev)
-+{
-+	volatile TOE_QHDR_T	*toe_qhdr;
-+	volatile unsigned int	toeq_wptr; // toeq_rptr
-+	volatile GMAC_RXDESC_T	*toe_curr_desc;
-+	struct sk_buff	*skb;
-+	unsigned int	pkt_size;
-+	DMA_RWPTR_T	toeq_rwptr;
-+
-+	if (connection->status == TCP_CONN_CLOSING) {
-+		connection->status = TCP_CONN_CLOSED;
-+		hash_set_valid_flag(connection->hash_entry_index, 0);
-+		// remove timer first.
-+		// del_timer_sync(&(connection->rx_timer));
-+		// check if any queued frames last time.
-+		toe_qhdr = (volatile TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
-+		toe_qhdr += connection->qid;
-+		toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+
-+		//toeq_rptr = toe_qhdr->word1.bits.rptr;
-+		toeq_wptr = toe_qhdr->word1.bits.wptr;
-+		while (toeq_rwptr.bits.rptr != toeq_wptr) {
-+			printk("%s::pending frames in TOE Queue before closing!\n", __func__);
-+			toe_curr_desc = (GMAC_RXDESC_T*)(toe->toe_desc_base[connection->qid] +
-+				toe_qhdr->word1.bits.rptr*sizeof(GMAC_RXDESC_T));
-+			connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
-+			pkt_size = toe_curr_desc->word1.bits.byte_count;
-+			consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+				PCI_DMA_FROMDEVICE);
-+			skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
-+				SKB_RESERVE_BYTES));
-+			_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x03);
-+			connection->curr_rx_skb = skb;
-+			skb_reserve(skb, RX_INSERT_BYTES);
-+			skb_put(skb, pkt_size);
-+			skb->dev = connection->dev;
-+			skb->protocol = eth_type_trans(skb, connection->dev);
-+			skb->ip_summed = CHECKSUM_UNNECESSARY;
-+			netif_rx(skb);
-+			connection->dev->last_rx = jiffies;
-+
-+			toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+			SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+		}
-+		free_toeq_descs(connection->qid, toe);
-+		// shall we re-fill free queue?
-+
-+		reset_connection_index(connection->qid);
-+		//memset(connection, 0, sizeof(struct toe_conn));
-+		printk(" del timer and close connection %x, qid %d\n", (u32)connection, connection->qid);
-+		return;
-+	}
-+	/* enable or setup toe queue header */
-+	if (connection->status == TCP_CONN_CONNECTING && storlink_ctl.rx_max_pktsize) {
-+		volatile TOE_QHDR_T	*qhdr;
-+		int iq_id;
-+		connection->status = TCP_CONN_ESTABLISHED;
-+		qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
-+		               connection->qid * sizeof(TOE_QHDR_T));
-+
-+		iq_id = get_interrupt_queue_id(connection->qid);
-+		connection->dev = dev;
-+		connection->gmac = dev->priv;
-+		connection->toeq_rwptr.bits32 = 0;
-+
-+//		qhdr->word6.bits.iq_num = iq_id;
-+		qhdr->word6.bits.MaxPktSize = (connection->max_pktsize)>>2; // in word.
-+		qhdr->word7.bits.AckThreshold = connection->ack_threshold;
-+		qhdr->word7.bits.SeqThreshold = connection->seq_threshold;
-+
-+		// init timer.
-+#if 1
-+		init_timer(&connection->rx_timer);
-+		connection->rx_timer.expires = jiffies + 5;
-+		connection->rx_timer.data = (unsigned long)connection;
-+		connection->rx_timer.function = (void *)&connection_rx_timer;
-+		add_timer(&connection->rx_timer);
-+		connection->last_rx_jiffies = jiffies;
-+		printk("init_timer %x\n", (u32)jiffies);
-+#endif
-+		hash_set_valid_flag(connection->hash_entry_index, 1);
-+		return;
-+	} else {
-+		printk("%s::conn status %x, rx_pktsize %d\n",
-+			__func__, connection->status, storlink_ctl.rx_max_pktsize);
-+	}
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * get_connection_index
-+ * get_connection_index will find an available index for the connection,
-+ * when allocate a new connection is needed.
-+ * we find available Qid from AV bits and write to hash_table, so that when RxTOE
-+ * packet is received, sw_id from ToeQ descriptor is also the Qid of conneciton Q.
-+ *-------------------------------------------------------------------------*/
-+int get_connection_index(void)
-+{
-+	int i=0, j=0, index=-1;
-+	__u32	connection_bits;
-+
-+	for (i = 0; i< TOE_TOE_QUEUE_NUM/32; i++) {
-+		connection_bits = ~(toe_connection_bits[i]);
-+		if (connection_bits == 0)
-+			// all 32 bits are used.
-+			continue;
-+
-+		for (j=0; j<32; j++) {
-+			if (connection_bits & 0x01) {
-+				index = i*32 + j;
-+				return index;
-+			}
-+			connection_bits = connection_bits >> 1;
-+		}
-+	}
-+	return index;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * set_toe_connection
-+ *-------------------------------------------------------------------------*/
-+void set_toe_connection(int index, int val)
-+{
-+	if (val) {
-+		toe_connection_bits[index/32] |= (1<<(index%32));
-+	} else {
-+		toe_connection_bits[index/32] &= (~(1<<(index%32)));
-+	}
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * sl351x_get_toe_conn_flag
-+ *-------------------------------------------------------------------------*/
-+int sl351x_get_toe_conn_flag(int index)
-+{
-+	if (index < TOE_TOE_QUEUE_NUM)
-+		return (toe_connection_bits[index/32] & (1 << (index %32)));
-+	else
-+		return 0;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * sl351x_get_toe_conn_info
-+ *-------------------------------------------------------------------------*/
-+struct toe_conn * sl351x_get_toe_conn_info(int index)
-+{
-+	if (index < TOE_TOE_QUEUE_NUM)
-+		return (struct toe_conn *)&toe_connections[index];
-+	else
-+		return NULL;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * create_sw_toe_connection
-+ *-------------------------------------------------------------------------*/
-+struct toe_conn* create_sw_toe_connection(int qid, int ip_ver, void* ip_hdr,
-+	struct tcphdr* tcp_hdr)
-+{
-+	struct toe_conn*	connection =  &(toe_connections[qid]);
-+
-+	connection->ip_ver = (__u8)ip_ver;
-+	connection->qid = (__u8)qid;
-+	connection->source = (__u16)tcp_hdr->source;
-+	connection->dest = (__u16)tcp_hdr->dest;
-+	if (ip_ver == 4) {
-+		struct iphdr* iph = (struct iphdr*) ip_hdr;
-+		connection->saddr[0] = (__u32)iph->saddr;
-+		connection->daddr[0] = (__u32)iph->daddr;
-+//		printk("%s::saddr %x, daddr %x\n", __func__,
-+//			ntohl(connection->saddr[0]), ntohl(connection->daddr[0]));
-+	} else if (ip_ver == 6) {
-+		struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
-+		int i=0;
-+		for (i=0; i<4; i++) {
-+			connection->saddr[i] = (__u32)iph->saddr.in6_u.u6_addr32[i];
-+			connection->daddr[i] = (__u32)iph->daddr.in6_u.u6_addr32[i];
-+		}
-+	}
-+	connection->status = TCP_CONN_CREATION;
-+	return connection;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * fill_toeq_buf
-+ *-------------------------------------------------------------------------*/
-+int fill_toeq_buf(int index, TOE_INFO_T* toe)
-+{
-+	volatile TOE_QHDR_T	*qhdr;
-+	//struct toe_conn* connection;
-+	GMAC_RXDESC_T	*desc_ptr;
-+
-+	if (!toe->toe_desc_base[index]) {
-+		// first time. init.
-+		desc_ptr = (GMAC_RXDESC_T*)(pci_alloc_consistent(NULL, TOE_TOE_DESC_NUM
-+		            *sizeof(GMAC_RXDESC_T), (dma_addr_t*)&toe->toe_desc_base_dma[index]));
-+
-+		toe->toe_desc_num = TOE_TOE_DESC_NUM;
-+		toe->toe_desc_base[index] = (unsigned int)desc_ptr;
-+	}
-+	qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
-+									index*sizeof(TOE_QHDR_T));
-+	//connection = (struct toe_conn*)&(toe_connections[index]);
-+
-+	qhdr->word0.base_size = ((unsigned int)toe->toe_desc_base_dma[index]&TOE_QHDR0_BASE_MASK)
-+					| TOE_TOE_DESC_POWER;
-+	qhdr->word1.bits32 = 0;
-+	qhdr->word2.bits32 = 0;
-+	qhdr->word3.bits32 = 0;
-+	qhdr->word4.bits32 = 0;
-+	qhdr->word5.bits32 = 0;
-+	return 1;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * create_toe_hash_entry_smb
-+ * add SMB header in hash entry.
-+ *-------------------------------------------------------------------------*/
-+int create_toe_hash_entry_smb(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr,
-+	int sw_id)
-+{
-+	HASH_ENTRY_T	hash_entry, *entry;
-+	int	hash_entry_index;
-+	int i;
-+
-+	entry = (HASH_ENTRY_T*)&hash_entry;
-+	memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
-+	entry->rule = 0;
-+
-+	/* enable fields of hash key */
-+	entry->key_present.ip_protocol = 1;
-+	entry->key_present.sip = 1;
-+	entry->key_present.dip = 1;
-+	entry->key_present.l4_bytes_0_3 = 1;	// src port and dest port
-+	entry->key_present.l7_bytes_0_3 = 0;	// do we need to enable NETBIOS? how?
-+	entry->key_present.l7_bytes_4_7 = 1;	// "SMB" header
-+
-+	/* hash key */
-+	entry->key.ip_protocol = IPPROTO_TCP;
-+	if (ip_ver == 4) {
-+		struct iphdr *iph = (struct iphdr*)ip_hdr;
-+		memcpy(entry->key.sip, &iph->saddr, 4);
-+		memcpy(entry->key.dip, &iph->daddr, 4);
-+	} else if (ip_ver == 6) {
-+		struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
-+		for (i=0; i<4; i++) {
-+			memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
-+			memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
-+		}
-+	}
-+	*(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
-+	*(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
-+
-+	entry->key.l7_bytes[4] = 0xff;
-+	entry->key.l7_bytes[5] = 0x53;
-+	entry->key.l7_bytes[6] = 0x4d;
-+	entry->key.l7_bytes[7] = 0x42;
-+
-+	/* action of hash entry match */
-+	entry->action.sw_id = 1;
-+	entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
-+	entry->action.srce_qid = 0;
-+	hash_entry_index = hash_add_toe_entry(entry);
-+
-+	return hash_entry_index;
-+}
-+
-+// best performance of tcp streaming.
-+/*---------------------------------------------------------------------------
-+ * create_toe_hash_entry_smb
-+ * add SMB header in hash entry.
-+ *-------------------------------------------------------------------------*/
-+int create_toe_hash_entry_ftp(int ip_ver, void* ip_hdr, struct tcphdr* tcphdr)
-+{
-+	return 0;
-+}
-+
-+// is hash entry for nfs needed?
-+
-+/*
-+ * Create a TOE hash entry by given ip addresses and tcp port numbers.
-+ * hash entry index will be saved in sw connection.
-+ */
-+/*---------------------------------------------------------------------------
-+ * create_toe_hash_entry
-+ *-------------------------------------------------------------------------*/
-+int create_toe_hash_entry(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr, int sw_id)
-+{
-+	HASH_ENTRY_T	hash_entry, *entry;
-+//	unsigned long	hash_key[HASH_MAX_DWORDS];
-+	int	hash_entry_index;
-+
-+	entry = (HASH_ENTRY_T*) &hash_entry;
-+	memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
-+	entry->rule = 0;
-+	/* enable fields of hash key */
-+	entry->key_present.ip_protocol = 1;
-+	entry->key_present.sip = 1;
-+	entry->key_present.dip = 1;
-+	entry->key_present.l4_bytes_0_3 = 1;	// src port and dest port
-+
-+	/* hash key */
-+	entry->key.ip_protocol = IPPROTO_TCP;
-+	if (ip_ver == 4) {
-+		// key of ipv4
-+		struct iphdr* iph = (struct iphdr*)ip_hdr;
-+		memcpy(entry->key.sip, &iph->saddr, 4);
-+		memcpy(entry->key.dip, &iph->daddr, 4);
-+	} else if (ip_ver == 6) {
-+		// key of ipv6
-+		int i=0;
-+		struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
-+		for (i=0; i<4; i++) {
-+			memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
-+			memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
-+		}
-+	}
-+	*(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
-+	*(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
-+	// is it necessary to write ip version to hash key?
-+
-+	/* action of hash entry match */
-+	entry->action.sw_id = 1;
-+	entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
-+	entry->action.srce_qid = 0;	// 0 for SW FreeQ. 1 for HW FreeQ.
-+	hash_entry_index = hash_add_toe_entry(entry);
-+//	printk("\n%s. sw_id %d, hash_entry index %x\n",
-+//		__func__, TOE_TOE_QID(sw_id), hash_entry_index);
-+	return hash_entry_index;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * init_toeq
-+ * 1. Reserve a TOE Queue id first, to get the sw toe_connection.
-+ * 2. Setup the hash entry with given iphdr and tcphdr, save hash entry index
-+ *    in sw toe_connection.
-+ * 3. Prepare sw toe_connection and allocate buffers.
-+ * 4. Validate hash entry.
-+ *-------------------------------------------------------------------------*/
-+struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr,
-+	TOE_INFO_T* toe, unsigned char* l2hdr)
-+{
-+//	printk("\t*** %s, ipver %d\n", __func__, ipver);
-+	int qid=-1;
-+	struct toe_conn* connection;
-+	int hash_entry_index;
-+	// int i=0;
-+	unsigned short	dest_port = ntohs(tcp_hdr->dest);
-+
-+	if (dest_port == 445) {
-+		printk("%s::SMB/CIFS connection\n", __func__);
-+	} else if (dest_port == 20) {
-+		printk("%s::ftp-data connection\n", __func__);
-+	} else if (dest_port == 2049) {
-+		printk("%s::nfs daemon connection\n", __func__);
-+	}
-+	qid = get_connection_index();
-+	if (qid<0)
-+		return 0;	// setup toeq failure
-+	set_toe_connection(qid, 1); // reserve this sw toeq.
-+
-+	//connection = (struct toe_conn*)&(toe_connections[qid]);
-+	hash_entry_index = create_toe_hash_entry(ipver, iph, tcp_hdr, qid);
-+	if (hash_entry_index <0) {
-+		printk("%s::release toe hash entry!\n", __func__);
-+		set_toe_connection(qid, 0); // release this sw toeq.
-+		return 0;
-+	}
-+	connection = create_sw_toe_connection(qid, ipver, iph, tcp_hdr);
-+	connection->hash_entry_index = (__u16) hash_entry_index;
-+
-+	fill_toeq_buf(qid, toe);
-+	memcpy(&connection->l2_hdr, l2hdr, sizeof(struct ethhdr));
-+	spin_lock_init(&connection->conn_lock);
-+
-+	return connection;
-+}
-+
-+#if 0
-+/*----------------------------------------------------------------------
-+*   toe_init_toe_queue
-+*   (1) Initialize the TOE Queue Header
-+*       Register: TOE_TOE_QUE_HDR_BASE (0x60003000)
-+*   (2) Initialize Descriptors of TOE Queues
-+*----------------------------------------------------------------------*/
-+void toe_init_toe_queue(TOE_INFO_T* toe)
-+{
-+}
-+EXPORT_SYMBOL(toe_init_toe_queue);
-+#endif
-+
-+/*---------------------------------------------------------------------------
-+ * dump_jumbo_skb
-+ *-------------------------------------------------------------------------*/
-+void dump_jumbo_skb(struct jumbo_frame *jumbo_skb)
-+{
-+	if (jumbo_skb->skb0) {
-+//		printk("%s. jumbo skb %x, len %d\n",
-+//			__func__, jumbo_skb->skb0->data, jumbo_skb->skb0->len);
-+		netif_rx(jumbo_skb->skb0);
-+	}
-+	jumbo_skb->skb0 = 0;
-+	jumbo_skb->tail = 0;
-+	jumbo_skb->iphdr0 = 0;
-+	jumbo_skb->tcphdr0 = 0;
-+}
-+
-+/* ---------------------------------------------------------------------
-+ * Append skb to skb0. skb0 is the jumbo frame that will be passed to
-+ * kernel tcp.
-+ * --------------------------------------------------------------------*/
-+void rx_append_skb(struct jumbo_frame *jumbo_skb, struct sk_buff* skb, int payload_len)
-+{
-+	struct iphdr* iphdr0 = (struct iphdr*)&(skb->data[0]);
-+	int ip_hdrlen = iphdr0->ihl << 2;
-+	struct tcphdr* tcphdr0 = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-+
-+	if (!jumbo_skb->skb0) {
-+		// head of the jumbo frame.
-+		jumbo_skb->skb0 = skb;
-+		jumbo_skb->tail = 0;
-+		jumbo_skb->iphdr0 = iphdr0;
-+		jumbo_skb->tcphdr0 = tcphdr0;
-+	} else {
-+		if (!jumbo_skb->tail)
-+			skb_shinfo(jumbo_skb->skb0)->frag_list = skb;
-+		else
-+			(jumbo_skb->tail)->next = skb;
-+		jumbo_skb->tail = skb;
-+
-+		// do we need to change truesize as well?
-+		jumbo_skb->skb0->len += payload_len;
-+		jumbo_skb->skb0->data_len += payload_len;
-+
-+		jumbo_skb->iphdr0->tot_len = htons(ntohs(jumbo_skb->iphdr0->tot_len)+payload_len);
-+		jumbo_skb->tcphdr0->ack_seq = tcphdr0->ack_seq;
-+		jumbo_skb->tcphdr0->window = tcphdr0->window;
-+
-+		skb->len += payload_len;
-+		skb->data_len = 0;
-+		skb->data += ntohs(iphdr0->tot_len) - payload_len;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_handle_toeq
-+* (1) read interrupt Queue to get TOE Q.
-+* (2) get packet fro TOE Q and send to upper layer handler.
-+* (3) allocate new buffers and put to TOE Q. Intr Q buffer is recycled.
-+*----------------------------------------------------------------------*/
-+void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status)
-+{
-+	//volatile INTRQ_INFO_T	*intrq_info;
-+	//TOEQ_INFO_T		*toeq_info;
-+	volatile NONTOE_QHDR_T	*intr_qhdr;
-+	volatile TOE_QHDR_T		*toe_qhdr;
-+	volatile INTR_QHDR_T	*intr_curr_desc;
-+	TOE_INFO_T	*toe = &toe_private_data;
-+
-+	volatile GMAC_RXDESC_T	*toe_curr_desc; // , *fq_desc;// *tmp_desc;
-+	volatile DMA_RWPTR_T	intr_rwptr, toeq_rwptr;  // fq_rwptr;
-+
-+	unsigned int 	pkt_size, desc_count, tcp_qid;
-+	volatile unsigned int	toeq_wptr;
-+	struct toe_conn*		connection;
-+	int		i, frag_id = 0;
-+	// unsigned long	toeq_flags;
-+	struct jumbo_frame	jumbo_skb;
-+	struct sk_buff	*skb;
-+	__u32	interrupt_status;
-+
-+	in_toe_isr++;
-+
-+	interrupt_status = status >> 24;
-+	// get interrupt queue header
-+	intr_qhdr = (volatile NONTOE_QHDR_T*)TOE_INTR_Q_HDR_BASE;
-+	memset(&jumbo_skb, 0, sizeof(struct jumbo_frame));
-+
-+	for (i=0; i> 1;
-+			continue;
-+		}
-+		interrupt_status = interrupt_status >> 1;
-+		intr_rwptr.bits32 = readl(&intr_qhdr->word1);
-+
-+		while ( intr_rwptr.bits.rptr != intr_rwptr.bits.wptr) {
-+			int max_pktsize = 1;
-+			// get interrupt queue descriptor.
-+			intr_curr_desc = (INTR_QHDR_T*)toe->intr_desc_base +
-+				i* TOE_INTR_DESC_NUM + intr_rwptr.bits.rptr;
-+//			printk("%s::int %x\n", __func__, intr_curr_desc->word1.bits32);
-+			// get toeq id
-+			tcp_qid = (u8)intr_curr_desc->word1.bits.tcp_qid - (u8)TOE_TOE_QID(0);
-+			// get toeq queue header
-+			toe_qhdr = (volatile TOE_QHDR_T*) TOE_TOE_QUE_HDR_BASE;
-+			toe_qhdr += tcp_qid;
-+			connection = &toe_connections[tcp_qid];
-+			del_timer(&connection->rx_timer);
-+			// Gary Chen spin_lock_irqsave(&connection->conn_lock, toeq_flags);
-+			// handling interrupts of this TOE Q.
-+			if (intr_curr_desc->word1.bits.ctl || intr_curr_desc->word1.bits.osq ||
-+				intr_curr_desc->word1.bits.abn)
-+				max_pktsize = 0;
-+			if (!max_pktsize || intr_curr_desc->word1.bits.TotalPktSize) {
-+				desc_count=0;
-+				// wptr in intl queue is where this TOE interrupt should stop.
-+				toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+				toeq_wptr = intr_curr_desc->word0.bits.wptr;
-+				if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
-+					printk("conn rptr %d, hw rptr %d\n",
-+						connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
-+
-+				if (intr_curr_desc->word1.bits.ctl &&
-+					(toeq_rwptr.bits.rptr == toeq_wptr)) {
-+					printk("\nctrl frame, but not in TOE queue! conn rptr %d, hw wptr %d\n",
-+						connection->toeq_rwptr.bits.rptr, toeq_wptr);
-+//					dump_toe_qhdr(toe_qhdr);
-+//					dump_intrq_desc(intr_curr_desc);
-+				}
-+				// while (toeq_rwptr.bits.rptr != intr_curr_desc->word0.bits.wptr) {
-+				while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
-+					frag_id++;
-+					toe_curr_desc = (volatile GMAC_RXDESC_T *)(toe->toe_desc_base[tcp_qid]
-+						+ toe_qhdr->word1.bits.rptr *sizeof(GMAC_RXDESC_T));
-+					connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
-+					desc_count = toe_curr_desc->word0.bits.desc_count;
-+					pkt_size = toe_curr_desc->word1.bits.byte_count;
-+					consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+						PCI_DMA_FROMDEVICE);
-+					skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
-+						SKB_RESERVE_BYTES));
-+					_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x01);
-+					connection->curr_rx_skb = skb;
-+					skb_reserve(skb, RX_INSERT_BYTES);
-+					if ((skb->len + pkt_size) > (1514+16))
-+					{
-+						printk("skb->len=%d, pkt_size=%d\n",skb->len, pkt_size);
-+						while(1);
-+					}
-+
-+					skb_put(skb, pkt_size);
-+					skb->dev = dev;
-+					skb->protocol = eth_type_trans(skb, dev);
-+					skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+					if (toe_curr_desc->word3.bits32 & 0x1b000000)
-+						dump_jumbo_skb(&jumbo_skb);
-+
-+					rx_append_skb(&jumbo_skb, skb, pkt_size-toe_curr_desc->word3.bits.l7_offset);
-+//					spin_lock_irqsave(&gmac_fq_lock, flags);
-+					toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+					SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+//					spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+					if (storlink_ctl.fqint_threshold)
-+						continue;
-+#if 0
-+//#if (HANDLE_FREEQ_METHOD == HANDLE_FREEQ_INDIVIDUAL)
-+					if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
-+						printk("%s::toe queue alloc buffer ", __func__);
-+					}
-+					*(unsigned int*)(skb->data) = (unsigned int)skb;
-+					connection->curr_rx_skb = skb;
-+					skb_reserve(skb, SKB_RESERVE_BYTES);
-+
-+					spin_lock_irqsave(&gmac_fq_lock, flags);
-+					fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+					if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
-+						printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
-+						mac_stop_txdma((struct net_device*) tp->dev);
-+						spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+						while(1);
-+					}
-+					fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
-+					fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+
-+					fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+					SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+					toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+					spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+#endif
-+				} // end of this multi-desc.
-+				dump_jumbo_skb(&jumbo_skb);
-+				dev->last_rx = jiffies;
-+				connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
-+			} else if (intr_curr_desc->word1.bits.sat) {
-+				toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+				toeq_wptr = intr_curr_desc->word0.bits.wptr;
-+				if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
-+					printk("SAT. conn rptr %d, hw rptr %d\n",
-+						connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
-+/*
-+					printk("%s::SAT int!, ackcnt %x, seqcnt %x, rptr %d, wptr %d, ack %x, qhack %x\n",
-+ 						__func__, intr_curr_desc->word4.bits.AckCnt, intr_curr_desc->word4.bits.SeqCnt,
-+						toeq_rptr, toeq_wptr, intr_curr_desc->word3.ack_num, toe_qhdr->word4.ack_num);*/
-+				/* pure ack */
-+				if (toeq_rwptr.bits.rptr == toeq_wptr) {
-+					if (intr_curr_desc->word4.bits32) {
-+						skb = gen_pure_ack(connection, (TOE_QHDR_T *)toe_qhdr, (INTR_QHDR_T *)intr_curr_desc);
-+						skb_put(skb, 60);
-+						skb->dev = connection->dev;
-+						skb->ip_summed = CHECKSUM_UNNECESSARY;
-+						skb->protocol = eth_type_trans(skb, connection->dev);
-+						netif_rx(skb);
-+					} else
-+						printk("%s::SAT Interrupt!. But cnt is 0!\n", __func__);
-+				} else {
-+					// while (toeq_rwptr.bits.rptr != toeq_wptr) {
-+					while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
-+						toe_curr_desc = (volatile GMAC_RXDESC_T*)(toe->toe_desc_base[tcp_qid]
-+							+ toe_qhdr->word1.bits.rptr * sizeof(GMAC_RXDESC_T));
-+						connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
-+						desc_count = toe_curr_desc->word0.bits.desc_count;
-+						pkt_size = toe_curr_desc->word1.bits.byte_count;
-+						consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+							PCI_DMA_FROMDEVICE);
-+						// if ( ((toeq_rwptr.bits.rptr +1)&(TOE_TOE_DESC_NUM-1)) == toeq_wptr) {
-+						if ( RWPTR_ADVANCE_ONE(toe_qhdr->word1.bits.rptr, TOE_TOE_DESC_NUM) == toeq_wptr) {
-+							skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
-+								SKB_RESERVE_BYTES));
-+							_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x04);
-+							connection->curr_rx_skb = skb;
-+							skb_reserve(skb, RX_INSERT_BYTES);
-+							skb_put(skb, pkt_size);
-+							skb->dev = dev;
-+							skb->protocol = eth_type_trans(skb, dev);
-+							skb->ip_summed = CHECKSUM_UNNECESSARY;
-+							// printk("toeq_rptr %d, wptr %d\n", toeq_rptr, toeq_wptr);
-+							netif_rx(skb);
-+							dev->last_rx = jiffies;
-+/*
-+							if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
-+
-+							}
-+							*(unsigned int*)(skb->data) = (unsigned int) skb;
-+							skb_reserve(skb, SKB_RESERVE_BYTES); */
-+						} else {
-+							// reuse this skb, append to free queue..
-+							skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
-+								SKB_RESERVE_BYTES));
-+							_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x05);
-+							connection->curr_rx_skb = skb;
-+							dev_kfree_skb_irq(skb);
-+						}
-+#if 0
-+						spin_lock_irqsave(&gmac_fq_lock, flags);
-+						fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+/*						if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
-+							printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
-+							mac_stop_txdma((struct net_device*) tp->dev);
-+							spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+							while(1);
-+						} */
-+						fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
-+						fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+
-+						fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+						SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+						toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+	//					spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+#endif
-+//						spin_lock_irqsave(&gmac_fq_lock, flags);
-+						toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+						SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+//						spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+					}
-+				} // end of ACK with options.
-+				connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
-+				// Gary Chen spin_unlock_irqrestore(&connection->conn_lock, toeq_flags);
-+//				}
-+			};
-+			update_timer(connection);
-+			// any protection against interrupt queue header?
-+			intr_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(intr_rwptr.bits.rptr, TOE_INTR_DESC_NUM);
-+			SET_RPTR(&intr_qhdr->word1, intr_rwptr.bits.rptr);
-+			intr_rwptr.bits32 = readl(&intr_qhdr->word1);
-+			toe_gmac_fill_free_q();
-+		} // end of this interrupt Queue processing.
-+	} // end of all interrupt Queues.
-+
-+	in_toe_isr = 0;
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/sl_lepus_hash.c
-@@ -0,0 +1,553 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl_lepus_hash.c
-+* Description	:
-+*		Handle Storlink Lepus Hash Functions
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*	03/13/2006	Gary Chen	Create and implement
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+
-+#include 
-+#include 
-+#include 
-+
-+#ifndef RXTOE_DEBUG
-+#define RXTOE_DEBUG
-+#endif
-+#undef RXTOE_DEBUG
-+
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#define	hash_printf				printk
-+
-+#define HASH_TIMER_PERIOD		(60*HZ)	// seconds
-+#define HASH_ILLEGAL_INDEX		0xffff
-+
-+/*----------------------------------------------------------------------
-+* Variables
-+*----------------------------------------------------------------------*/
-+u32					hash_activate_bits[HASH_TOTAL_ENTRIES/32];
-+u32					hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
-+char 				hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
-+static struct timer_list hash_timer_obj;
-+LIST_HEAD(hash_timeout_list);
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length);
-+static void hash_timer_func(u32 data);
-+
-+/*----------------------------------------------------------------------
-+* hash_init
-+*----------------------------------------------------------------------*/
-+void hash_init(void)
-+{
-+	int i;
-+	volatile u32 *dp1, *dp2, dword;
-+
-+	dp1 = (volatile u32 *) TOE_V_BIT_BASE;
-+	dp2 = (volatile u32 *) TOE_A_BIT_BASE;
-+
-+	for (i=0; iindex, 1);
-+//	printk("Dump hash key!\n");
-+//	dump_hash_key(entry);
-+	return entry->index;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_valid_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_valid_flag(int index, int valid)
-+{
-+	register u32 reg32;
-+
-+	reg32 = TOE_V_BIT_BASE + (index/32) * 4;
-+
-+	if (valid)
-+	{
-+		writel(readl(reg32) | (1 << (index%32)), reg32);
-+	}
-+	else
-+	{
-+		writel(readl(reg32) & ~(1 << (index%32)), reg32);
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_nat_owner_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_nat_owner_flag(int index, int valid)
-+{
-+	if (valid)
-+	{
-+		hash_nat_owner_bits[index/32] |= (1 << (index % 32));
-+	}
-+	else
-+	{
-+		hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
-+	}
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_build_keys
-+*----------------------------------------------------------------------*/
-+int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	u32 	data;
-+	unsigned char 	*cp;
-+	int				i, j;
-+	unsigned short 	index;
-+	int 			total;
-+
-+	memset((void *)destp, 0, HASH_MAX_BYTES);
-+	cp = (unsigned char *)destp;
-+
-+	if (entry->key_present.port || entry->key_present.Ethertype)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.Ethertype);		// word 0
-+		HASH_PUSH_BYTE(cp, entry->key.port);			// Byte 2
-+		HASH_PUSH_BYTE(cp, 0);							// Byte 3
-+	}
-+	else
-+	{
-+		HASH_PUSH_DWORD(cp, 0);
-+	}
-+
-+	if (entry->key_present.da || entry->key_present.sa)
-+	{
-+		unsigned char mac[4];
-+		if (entry->key_present.da)
-+		{
-+			for (i=0; i<4; i++)
-+				HASH_PUSH_BYTE(cp, entry->key.da[i]);
-+		}
-+		mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
-+		mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
-+		mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
-+		mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
-+		data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
-+		HASH_PUSH_DWORD(cp, data);
-+		if (entry->key_present.sa)
-+		{
-+			for (i=2; i<6; i++)
-+				HASH_PUSH_BYTE(cp, entry->key.sa[i]);
-+		}
-+	}
-+
-+	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
-+		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
-+	}
-+	if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.ip_protocol);		// Byte 0
-+		HASH_PUSH_BYTE(cp, entry->key.ip_tos);			// Byte 1
-+		HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen);		// Byte 2
-+		HASH_PUSH_BYTE(cp, 0);							// Byte 3
-+	}
-+
-+	if (entry->key_present.ipv6_flow_label)
-+	{
-+		HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label);	// low word
-+	}
-+	if (entry->key_present.sip)
-+	{
-+		// input (entry->key.sip[i]) is network-oriented
-+		// output (hash key) is host-oriented
-+		for (i=3; i>=0; i--)
-+			HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+		if (entry->key.ipv6)
-+		{
-+			for (i=4; i<16; i+=4)
-+			{
-+				for (j=i+3; j>=i; j--)
-+					HASH_PUSH_BYTE(cp, entry->key.sip[j]);
-+			}
-+		}
-+	}
-+	if (entry->key_present.dip)
-+	{
-+		// input (entry->key.sip[i]) is network-oriented
-+		// output (hash key) is host-oriented
-+		for (i=3; i>=0; i--)
-+			HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+		if (entry->key.ipv6)
-+		{
-+			for (i=4; i<16; i+=4)
-+			{
-+				for (j=i+3; j>=i; j--)
-+					HASH_PUSH_BYTE(cp, entry->key.dip[j]);
-+			}
-+		}
-+	}
-+
-+	if (entry->key_present.l4_bytes_0_3)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+	}
-+	if (entry->key_present.l4_bytes_4_7)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
-+	}
-+	if (entry->key_present.l4_bytes_8_11)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
-+	}
-+	if (entry->key_present.l4_bytes_12_15)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
-+	}
-+	if (entry->key_present.l4_bytes_16_19)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
-+	}
-+	if (entry->key_present.l4_bytes_20_23)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
-+	}
-+	if (entry->key_present.l7_bytes_0_3)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
-+	}
-+	if (entry->key_present.l7_bytes_4_7)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
-+	}
-+	if (entry->key_present.l7_bytes_8_11)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
-+	}
-+	if (entry->key_present.l7_bytes_12_15)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
-+	}
-+	if (entry->key_present.l7_bytes_16_19)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
-+	}
-+	if (entry->key_present.l7_bytes_20_23)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
-+	}
-+
-+	// get hash index
-+	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+	if (total > HASH_MAX_KEY_DWORD)
-+	{
-+		//hash_printf("Total key words (%d) is too large (> %d)!\n",
-+		//				total, HASH_MAX_KEY_DWORD);
-+		return -1;
-+	}
-+
-+	if (entry->key_present.port || entry->key_present.Ethertype)
-+		index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+	else
-+	{
-+		if (total == 1)
-+		{
-+			hash_printf("No key is assigned!\n");
-+			return -1;
-+		}
-+
-+		index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
-+	}
-+
-+	entry->index = index & HASH_BITS_MASK;
-+
-+	//hash_printf("Total key words = %d, Hash Index= %d\n",
-+	//				total, entry->index);
-+
-+	cp = (unsigned char *)destp;
-+	cp+=3;
-+	HASH_PUSH_BYTE(cp, entry->rule);	// rule
-+
-+	entry->total_dwords = total;
-+
-+	return total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_build_nat_keys
-+*----------------------------------------------------------------------*/
-+void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	unsigned char 	*cp;
-+	int				i;
-+	unsigned short 	index;
-+	int 			total;
-+
-+	memset((void *)destp, 0, HASH_MAX_BYTES);
-+
-+	cp = (unsigned char *)destp + 2;
-+	HASH_PUSH_BYTE(cp, entry->key.port);
-+	cp++;
-+
-+	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
-+		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
-+	}
-+
-+	HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
-+	cp+=3;
-+
-+	// input (entry->key.sip[i]) is network-oriented
-+	// output (hash key) is host-oriented
-+	for (i=3; i>=0; i--)
-+		HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+
-+	// input (entry->key.sip[i]) is network-oriented
-+	// output (hash key) is host-oriented
-+	for (i=3; i>=0; i--)
-+		HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+
-+	// get hash index
-+	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+	index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+	entry->index = index & ((1 << HASH_BITS) - 1);
-+
-+	cp = (unsigned char *)destp;
-+	cp+=3;
-+	HASH_PUSH_BYTE(cp, entry->rule);	// rule
-+
-+	entry->total_dwords = total;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_write_entry
-+*----------------------------------------------------------------------*/
-+int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
-+{
-+	int		i;
-+	u32		*srcep, *destp, *destp2;
-+
-+	srcep = (u32 *)key;
-+	destp2 = destp = (u32 *)&hash_tables[entry->index][0];
-+
-+	for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
-+		*destp = *srcep;
-+
-+	srcep = (u32 *)&entry->action;
-+	*destp++ = *srcep;
-+
-+	srcep = (u32 *)&entry->param;
-+	for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
-+		*destp = *srcep;
-+
-+	memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
-+
-+	consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_timer_func
-+*----------------------------------------------------------------------*/
-+static void hash_timer_func(u32 data)
-+{
-+	int				i, j;
-+	volatile u32	*active_p, *own_p, *valid_p;
-+	u32				a_bits, own_bits;
-+
-+	valid_p = (volatile u32 *)TOE_V_BIT_BASE;
-+	active_p = (volatile u32 *)hash_activate_bits;
-+	own_p = (volatile u32 *)hash_nat_owner_bits;
-+	for (i=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, active_p++, valid_p++)
-+	{
-+		*active_p |= readl(TOE_A_BIT_BASE + (i*4));
-+		a_bits = *active_p;
-+		own_bits = *own_p;
-+		if (own_bits)
-+		{
-+#ifndef DEBUG_NAT_MIXED_HW_SW_TX
-+			a_bits = own_bits & ~a_bits;
-+#else
-+			a_bits = own_bits & a_bits;
-+#endif
-+			for (j=0; a_bits && j<32; j++)
-+			{
-+				if (a_bits & 1)
-+				{
-+					*valid_p &= ~(1 << j);		// invalidate it
-+#if !(defined(NAT_DEBUG_LAN_HASH_TIMEOUT) || defined(NAT_DEBUG_WAN_HASH_TIMEOUT))
-+					*own_p &= ~(1 << j);		// release ownership for NAT
-+#endif
-+// #ifdef DEBUG_NAT_MIXED_HW_SW_TX
-+#if 0
-+					hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
-+#endif
-+				}
-+				a_bits >>= 1;
-+			}
-+			*active_p &= ~own_bits;		// deactivate it for next polling
-+		}
-+	}
-+
-+	hash_timer_obj.expires = jiffies + HASH_TIMER_PERIOD;
-+	add_timer((struct timer_list *)data);
-+}
-+
-+/*----------------------------------------------------------------------
-+* dm_long
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length)
-+{
-+	u32		*start_p, *curr_p, *end_p;
-+	u32		*datap, data;
-+	int		i;
-+
-+	//if (length > 1024)
-+	//	length = 1024;
-+
-+	start_p = (u32 *)location;
-+	end_p = (u32 *)location + length;
-+	curr_p = (u32 *)((u32)location & 0xfffffff0);
-+	datap = (u32 *)location;
-+	while (curr_p < end_p)
-+	{
-+		hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
-+		for (i=0; i<4; i++)
-+		{
-+			if (curr_p < start_p || curr_p >= end_p)
-+               hash_printf("         ");
-+			else
-+			{
-+				data = *datap;
-+				hash_printf("%08X ", data);
-+			}
-+			if (i==1)
-+              hash_printf("- ");
-+
-+			curr_p++;
-+			datap++;
-+		}
-+        hash_printf("\n");
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_dump_entry
-+*----------------------------------------------------------------------*/
-+void hash_dump_entry(int index)
-+{
-+	hash_printf("Hash Index %d:\n", index);
-+	dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/sl_switch.c
-@@ -0,0 +1,650 @@
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#define GMAC_GLOBAL_BASE_ADDR       (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+#define GPIO_BASE_ADDR1  (IO_ADDRESS(SL2312_GPIO_BASE1))
-+enum GPIO_REG
-+{
-+    GPIO_DATA_OUT   = 0x00,
-+    GPIO_DATA_IN    = 0x04,
-+    GPIO_PIN_DIR    = 0x08,
-+    GPIO_BY_PASS    = 0x0c,
-+    GPIO_DATA_SET   = 0x10,
-+    GPIO_DATA_CLEAR = 0x14,
-+};
-+
-+#define GMAC_SPEED_10			0
-+#define GMAC_SPEED_100			1
-+#define GMAC_SPEED_1000			2
-+
-+enum phy_state
-+{
-+    LINK_DOWN   = 0,
-+    LINK_UP     = 1
-+};
-+
-+#ifndef BIT
-+#define BIT(x)						(1 << (x))
-+#endif
-+
-+//int Get_Set_port_status();
-+unsigned int SPI_read_bit(void);
-+void SPI_write_bit(char bit_EEDO);
-+void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value);
-+unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr);
-+int SPI_default(void);
-+void SPI_CS_enable(unsigned char enable);
-+unsigned int SPI_get_identifier(void);
-+void phy_write(unsigned char port_no,unsigned char reg,unsigned int val);
-+unsigned int phy_read(unsigned char port_no,unsigned char reg);
-+void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask);
-+void init_seq_7385(unsigned char port_no) ;
-+void phy_receiver_init (unsigned char port_no);
-+
-+#define PORT_NO		4
-+int switch_pre_speed[PORT_NO]={0,0,0,0};
-+int switch_pre_link[PORT_NO]={0,0,0,0};
-+
-+
-+
-+
-+
-+/*				NOTES
-+ *   The Protocol of the SPI are as follows:
-+ *
-+ *     		   Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
-+ *	byte0     |   Block id  | r/w | sub-block        |
-+ *	byte1     |		Address			 |
-+ *	byte2	  |		Data			 |
-+ *	byte3	  |		Data			 |
-+ *	byte4	  |		Data			 |
-+ *	byte5	  |		Data			 |
-+ */
-+
-+
-+
-+
-+/***************************************/
-+/* define GPIO module base address     */
-+/***************************************/
-+#define GPIO_EECS	     0x80000000		/*   EECS: GPIO[22]   */
-+#define GPIO_MOSI	     0x20000000         /*   EEDO: GPIO[29]   send to 6996*/
-+#define GPIO_MISO	     0x40000000         /*   EEDI: GPIO[30]   receive from 6996*/
-+#define GPIO_EECK	     0x10000000         /*   EECK: GPIO[31]   */
-+
-+/*************************************************************
-+* SPI protocol for ADM6996 control
-+**************************************************************/
-+#define SPI_OP_LEN	     0x08		// the length of start bit and opcode
-+#define SPI_OPWRITE	     0X05		// write
-+#define SPI_OPREAD	     0X06		// read
-+#define SPI_OPERASE	     0X07		// erase
-+#define SPI_OPWTEN	     0X04		// write enable
-+#define SPI_OPWTDIS	     0X04		// write disable
-+#define SPI_OPERSALL	     0X04		// erase all
-+#define SPI_OPWTALL	     0X04		// write all
-+
-+#define SPI_ADD_LEN	     8			// bits of Address
-+#define SPI_DAT_LEN	     32			// bits of Data
-+
-+
-+/****************************************/
-+/*	Function Declare		*/
-+/****************************************/
-+
-+//unsigned int SPI_read_bit(void);
-+//void SPI_write_bit(char bit_EEDO);
-+//unsigned int SPI_read_bit(void);
-+/******************************************
-+* SPI_write
-+* addr -> Write Address
-+* value -> value to be write
-+***************************************** */
-+void phy_receiver_init (unsigned char port_no)
-+{
-+    phy_write(port_no,31,0x2a30);
-+    phy_write_masked(port_no, 12, 0x0200, 0x0300);
-+    phy_write(port_no,31,0);
-+}
-+
-+void phy_write(unsigned char port_no,unsigned char reg,unsigned int val)
-+{
-+	unsigned int cmd;
-+
-+	cmd = (port_no<<21)|(reg<<16)|val;
-+	SPI_write(3,0,1,cmd);
-+}
-+
-+unsigned int phy_read(unsigned char port_no,unsigned char reg)
-+{
-+	unsigned int cmd,reg_val;
-+
-+	cmd = BIT(26)|(port_no<<21)|(reg<<16);
-+	SPI_write(3,0,1,cmd);
-+	msleep(2);
-+	reg_val = SPI_read(3,0,2);
-+	return reg_val;
-+}
-+
-+void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask)
-+{
-+	unsigned int cmd,reg_val;
-+
-+	cmd = BIT(26)|(port_no<<21)|(reg<<16);	// Read reg_val
-+	SPI_write(3,0,1,cmd);
-+	mdelay(2);
-+	reg_val = SPI_read(3,0,2);
-+	reg_val &= ~mask;			// Clear masked bit
-+	reg_val |= (val&mask) ;			// set masked bit ,if true
-+	cmd = (port_no<<21)|(reg<<16)|reg_val;
-+	SPI_write(3,0,1,cmd);
-+}
-+
-+void init_seq_7385(unsigned char port_no)
-+{
-+	unsigned char rev;
-+
-+	phy_write(port_no, 31, 0x2a30);
-+	phy_write_masked(port_no, 8, 0x0200, 0x0200);
-+	phy_write(port_no, 31, 0x52b5);
-+	phy_write(port_no, 16, 0xb68a);
-+	phy_write_masked(port_no, 18, 0x0003, 0xff07);
-+	phy_write_masked(port_no, 17, 0x00a2, 0x00ff);
-+	phy_write(port_no, 16, 0x968a);
-+	phy_write(port_no, 31, 0x2a30);
-+	phy_write_masked(port_no, 8, 0x0000, 0x0200);
-+	phy_write(port_no, 31, 0x0000); /* Read revision */
-+	rev = phy_read(port_no, 3) & 0x000f;
-+	if (rev == 0)
-+	{
-+		phy_write(port_no, 31, 0x2a30);
-+		phy_write_masked(port_no, 8, 0x0200, 0x0200);
-+		phy_write(port_no, 31, 0x52b5);
-+		phy_write(port_no, 18, 0x0000);
-+		phy_write(port_no, 17, 0x0689);
-+		phy_write(port_no, 16, 0x8f92);
-+		phy_write(port_no, 31, 0x52B5);
-+		phy_write(port_no, 18, 0x0000);
-+		phy_write(port_no, 17, 0x0E35);
-+		phy_write(port_no, 16, 0x9786);
-+		phy_write(port_no, 31, 0x2a30);
-+		phy_write_masked(port_no, 8, 0x0000, 0x0200);
-+		phy_write(port_no, 23, 0xFF80);
-+		phy_write(port_no, 23, 0x0000);
-+	}
-+	phy_write(port_no, 31, 0x0000);
-+	phy_write(port_no, 18, 0x0048);
-+	if (rev == 0)
-+	{
-+		phy_write(port_no, 31, 0x2a30);
-+		phy_write(port_no, 20, 0x6600);
-+		phy_write(port_no, 31, 0x0000);
-+		phy_write(port_no, 24, 0xa24e);
-+	}
-+	else
-+	{
-+		phy_write(port_no, 31, 0x2a30);
-+		phy_write_masked(port_no, 22, 0x0240, 0x0fc0);
-+		phy_write_masked(port_no, 20, 0x4000, 0x6000);
-+		phy_write(port_no, 31, 1);
-+		phy_write_masked(port_no, 20, 0x6000, 0xe000);
-+		phy_write(port_no, 31, 0x0000);
-+	}
-+}
-+
-+int Get_Set_port_status()
-+{
-+	unsigned int    reg_val,ability,rcv_mask,mac_config;
-+	int is_link=0;
-+	int i;
-+
-+ 	rcv_mask = SPI_read(2,0,0x10);			// Receive mask
-+
-+	for(i=0;i<4;i++){
-+		reg_val = phy_read(i,1);
-+		if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
-+		{
-+			is_link=1;
-+			if(switch_pre_link[i]==LINK_DOWN){		// Link Down ==> Link up
-+
-+				rcv_mask |= BIT(i);			// Enable receive
-+
-+				reg_val = phy_read(i,10);
-+				if(reg_val & 0x0c00){
-+					printk("Port%d:Giga mode\n",i);
-+//					SPI_write(1,i,0x00,0x300701B1);
-+					mac_config = 0x00060004|(6<<6);
-+
-+					SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030);	// reset port
-+					mac_config |= (( BIT(i) << 19) | 0x08000000);
-+					SPI_write(1,i,0x00,mac_config);
-+					SPI_write(1,i,0x04,0x000300ff);		// flow control
-+
-+					reg_val = SPI_read(5,0,0x12);
-+					reg_val &= ~BIT(i);
-+					SPI_write(5,0,0x12,reg_val);
-+
-+					reg_val = SPI_read(1,i,0x00);
-+					reg_val |= 0x10010000;
-+					SPI_write(1,i,0x00,reg_val);
-+//					SPI_write(1,i,0x00,0x10070181);
-+					switch_pre_link[i]=LINK_UP;
-+					switch_pre_speed[i]=GMAC_SPEED_1000;
-+				}
-+				else{
-+					reg_val = phy_read(i,5);
-+					ability = (reg_val&0x5e0) >>5;
-+					if ((ability & 0x0C)) /* 100M */
-+					{
-+//						SPI_write(1,i,0x00,0x30050472);
-+						if((ability&0x08)==0) 		// Half
-+							mac_config = 0x00040004 |(17<<6);
-+						else				// Full
-+							mac_config = 0x00040004 |(17<<6);
-+
-+						SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030);	// reset port
-+						mac_config |= (( BIT(i) << 19) | 0x08000000);
-+						SPI_write(1,i,0x00,mac_config);
-+						SPI_write(1,i,0x04,0x000300ff);		// flow control
-+
-+						reg_val = SPI_read(5,0,0x12);
-+						reg_val &= ~BIT(i);
-+						SPI_write(5,0,0x12,reg_val);
-+
-+						reg_val = SPI_read(1,i,0x00);
-+						reg_val &= ~0x08000000;
-+						reg_val |= 0x10010000;
-+						SPI_write(1,i,0x00,reg_val);
-+//						SPI_write(1,i,0x00,0x10050442);
-+						printk("Port%d:100M\n",i);
-+						switch_pre_link[i]=LINK_UP;
-+						switch_pre_speed[i]=GMAC_SPEED_100;
-+					}
-+					else if((ability & 0x03)) /* 10M */
-+					{
-+//						SPI_write(1,i,0x00,0x30050473);
-+						if((ability&0x2)==0)		// Half
-+							mac_config = 0x00040004 |(17<<6);
-+						else				// Full
-+							mac_config = 0x00040004 |(17<<6);
-+
-+						SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030);	// reset port
-+						mac_config |= (( BIT(i) << 19) | 0x08000000);
-+						SPI_write(1,i,0x00,mac_config);
-+						SPI_write(1,i,0x04,0x000300ff);		// flow control
-+
-+						reg_val = SPI_read(5,0,0x12);
-+						reg_val &= ~BIT(i);
-+						SPI_write(5,0,0x12,reg_val);
-+
-+						reg_val = SPI_read(1,i,0x00);
-+						reg_val &= ~0x08000000;
-+						reg_val |= 0x10010000;
-+						SPI_write(1,i,0x00,reg_val);
-+//						SPI_write(1,i,0x00,0x10050443);
-+						printk("Port%d:10M\n",i);
-+						switch_pre_link[i]=LINK_UP;
-+						switch_pre_speed[i]=GMAC_SPEED_10;
-+					}
-+					else{
-+						SPI_write(1,i,0x00,0x20000030);
-+						printk("Port%d:Unknown mode\n",i);
-+						switch_pre_link[i]=LINK_DOWN;
-+						switch_pre_speed[i]=GMAC_SPEED_10;
-+					}
-+				}
-+			}
-+			else{						// Link up ==> Link UP
-+
-+			}
-+		}
-+		else{							// Link Down
-+			if(switch_pre_link[i]==LINK_UP){
-+				printk("Port%d:Link Down\n",i);
-+				//phy_receiver_init(i);
-+				reg_val = SPI_read(1,i,0);
-+				reg_val &= ~BIT(16);
-+				SPI_write(1,i,0x00,reg_val);			// disable RX
-+				SPI_write(5,0,0x0E,BIT(i));			// dicard packet
-+				while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
-+					msleep(1);
-+				SPI_write(1,i,0x00,0x20000030);			// PORT_RST
-+				SPI_write(5,0,0x0E,SPI_read(5,0,0x0E) & ~BIT(i));// accept packet
-+
-+				reg_val = SPI_read(5,0,0x12);
-+				reg_val |= BIT(i);
-+				SPI_write(5,0,0x12,reg_val);
-+			}
-+			switch_pre_link[i]=LINK_DOWN;
-+			rcv_mask &= ~BIT(i);			// disable receive
-+		}
-+	}
-+
-+	SPI_write(2,0,0x10,rcv_mask);			// Receive mask
-+	return is_link;
-+
-+}
-+EXPORT_SYMBOL(Get_Set_port_status);
-+
-+void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value)
-+{
-+	int     i;
-+	char    bit;
-+	unsigned int data;
-+
-+	SPI_CS_enable(1);
-+
-+	data = (block<<5) | 0x10 | subblock;
-+
-+	//send write command
-+	for(i=SPI_OP_LEN-1;i>=0;i--)
-+	{
-+		bit = (data>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	// send 8 bits address (MSB first, LSB last)
-+	for(i=SPI_ADD_LEN-1;i>=0;i--)
-+	{
-+		bit = (addr>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+	// send 32 bits data (MSB first, LSB last)
-+	for(i=SPI_DAT_LEN-1;i>=0;i--)
-+	{
-+		bit = (value>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	SPI_CS_enable(0);	// CS low
-+
-+}
-+
-+
-+/************************************
-+* SPI_write_bit
-+* bit_EEDO -> 1 or 0 to be written
-+************************************/
-+void SPI_write_bit(char bit_EEDO)
-+{
-+	unsigned int addr;
-+	unsigned int value;
-+
-+	addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
-+	value = readl(addr) |GPIO_EECK |GPIO_MOSI ;   /* set EECK/MISO Pin to output */
-+	writel(value,addr);
-+	if(bit_EEDO)
-+	{
-+		addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+		writel(GPIO_MOSI,addr); /* set MISO to 1 */
-+
-+	}
-+	else
-+	{
-+		addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+		writel(GPIO_MOSI,addr); /* set MISO to 0 */
-+	}
-+	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+	writel(GPIO_EECK,addr); /* set EECK to 1 */
-+	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+	writel(GPIO_EECK,addr); /* set EECK to 0 */
-+
-+	//return ;
-+}
-+
-+/**********************************************************************
-+* read a bit from ADM6996 register
-+***********************************************************************/
-+unsigned int SPI_read_bit(void) // read data from
-+{
-+	unsigned int addr;
-+	unsigned int value;
-+
-+	addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
-+	value = readl(addr) & (~GPIO_MISO);   // set EECK to output and MISO to input
-+	writel(value,addr);
-+
-+	addr =(GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+	writel(GPIO_EECK,addr); // set EECK to 1
-+
-+
-+	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_IN);
-+	value = readl(addr) ;
-+
-+	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+	writel(GPIO_EECK,addr); // set EECK to 0
-+
-+
-+	value = value >> 30;
-+	return value ;
-+}
-+
-+/******************************************
-+* SPI_default
-+* EEPROM content default value
-+*******************************************/
-+int SPI_default(void)
-+{
-+	int i;
-+	unsigned reg_val,cmd;
-+
-+#if 0
-+	SPI_write(7,0,0x1C,0x01);				// map code space to 0
-+
-+	reg_val = SPI_read(7,0,0x10);
-+	reg_val |= 0x0146;
-+	reg_val &= ~0x0001;
-+	SPI_write(7,0,0x10,reg_val);				// reset iCPU and enable ext_access
-+	SPI_write(7,0,0x11,0x0000);				// start address
-+	for(i=0;i which table to be read: 1/count  0/EEPROM
-+* addr  -> Address to be read
-+* return : Value of the register
-+*************************************************/
-+unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr)
-+{
-+	int     i;
-+	char    bit;
-+	unsigned int data,value=0;
-+
-+	SPI_CS_enable(1);
-+
-+	data = (block<<5) | subblock;
-+
-+	//send write command
-+	for(i=SPI_OP_LEN-1;i>=0;i--)
-+	{
-+		bit = (data>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	// send 8 bits address (MSB first, LSB last)
-+	for(i=SPI_ADD_LEN-1;i>=0;i--)
-+	{
-+		bit = (addr>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	// dummy read for chip ready
-+	for(i=0;i<8;i++)
-+		SPI_read_bit();
-+
-+
-+	// read 32 bits data (MSB first, LSB last)
-+	for(i=SPI_DAT_LEN-1;i>=0;i--)
-+	{
-+		bit = SPI_read_bit();
-+		value |= bit<
-+
-+#define SL351x_GMAC_WORKAROUND		1
-+
-+#undef BIG_ENDIAN
-+#define BIG_ENDIAN  				0
-+#define GMAC_DEBUG      			1
-+#define GMAC_NUM					2
-+//#define	L2_jumbo_frame				1
-+
-+#define _PACKED_					__attribute__ ((aligned(1), packed))
-+
-+#ifndef BIT
-+#define BIT(x)						(1 << (x))
-+#endif
-+
-+#define REG32(addr)     			(*(volatile unsigned long  * const)(addr))
-+
-+#define DMA_MALLOC(size,handle)		pci_alloc_consistent(NULL,size,handle)
-+#define DMA_MFREE(mem,size,handle)	pci_free_consistent(NULL,size,mem,handle)
-+
-+// Define frame size
-+#define ETHER_ADDR_LEN				6
-+#define GMAC_MAX_ETH_FRAME_SIZE		1514
-+#define GMAC_TX_BUF_SIZE			((GMAC_MAX_ETH_FRAME_SIZE + 31) & (~31))
-+#define MAX_ISR_WORK        		20
-+
-+#ifdef	L2_jumbo_frame
-+#define SW_RX_BUF_SIZE				9234	// 2048 ,9234
-+#else
-+#define SW_RX_BUF_SIZE				1536	// 2048
-+#endif
-+
-+#define HW_RX_BUF_SIZE				1536	// 2048
-+
-+#define GMAC_DEV_TX_TIMEOUT  		(10*HZ)			//add by CH
-+#define	SKB_RESERVE_BYTES			16
-+
-+/**********************************************************************
-+ * Base Register
-+ **********************************************************************/
-+#define TOE_BASE					(IO_ADDRESS(SL2312_TOE_BASE))
-+#define GMAC_GLOBAL_BASE_ADDR       (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+#define TOE_GLOBAL_BASE				(TOE_BASE + 0x0000)
-+#define TOE_NONTOE_QUE_HDR_BASE		(TOE_BASE + 0x2000)
-+#define TOE_TOE_QUE_HDR_BASE		(TOE_BASE + 0x3000)
-+#define TOE_V_BIT_BASE				(TOE_BASE + 0x4000)
-+#define TOE_A_BIT_BASE				(TOE_BASE + 0x6000)
-+#define TOE_GMAC0_DMA_BASE			(TOE_BASE + 0x8000)
-+#define TOE_GMAC0_BASE				(TOE_BASE + 0xA000)
-+#define TOE_GMAC1_DMA_BASE			(TOE_BASE + 0xC000)
-+#define TOE_GMAC1_BASE				(TOE_BASE + 0xE000)
-+
-+/**********************************************************************
-+ * Queue ID
-+ **********************************************************************/
-+#define TOE_SW_FREE_QID				0x00
-+#define TOE_HW_FREE_QID				0x01
-+#define TOE_GMAC0_SW_TXQ0_QID		0x02
-+#define TOE_GMAC0_SW_TXQ1_QID		0x03
-+#define TOE_GMAC0_SW_TXQ2_QID		0x04
-+#define TOE_GMAC0_SW_TXQ3_QID		0x05
-+#define TOE_GMAC0_SW_TXQ4_QID		0x06
-+#define TOE_GMAC0_SW_TXQ5_QID		0x07
-+#define TOE_GMAC0_HW_TXQ0_QID		0x08
-+#define TOE_GMAC0_HW_TXQ1_QID		0x09
-+#define TOE_GMAC0_HW_TXQ2_QID		0x0A
-+#define TOE_GMAC0_HW_TXQ3_QID		0x0B
-+#define TOE_GMAC1_SW_TXQ0_QID		0x12
-+#define TOE_GMAC1_SW_TXQ1_QID		0x13
-+#define TOE_GMAC1_SW_TXQ2_QID		0x14
-+#define TOE_GMAC1_SW_TXQ3_QID		0x15
-+#define TOE_GMAC1_SW_TXQ4_QID		0x16
-+#define TOE_GMAC1_SW_TXQ5_QID		0x17
-+#define TOE_GMAC1_HW_TXQ0_QID		0x18
-+#define TOE_GMAC1_HW_TXQ1_QID		0x19
-+#define TOE_GMAC1_HW_TXQ2_QID		0x1A
-+#define TOE_GMAC1_HW_TXQ3_QID		0x1B
-+#define TOE_GMAC0_DEFAULT_QID		0x20
-+#define TOE_GMAC1_DEFAULT_QID		0x21
-+#define TOE_CLASSIFICATION_QID(x)	(0x22 + x)	// 0x22 ~ 0x2F
-+#define TOE_TOE_QID(x)				(0x40 + x)	// 0x40 ~ 0x7F
-+
-+/**********************************************************************
-+ * TOE DMA Queue Number should be 2^n, n = 6...12
-+ * TOE DMA Queues are the following queue types:
-+ *		SW Free Queue, HW Free Queue,
-+ *		GMAC 0/1 SW TX Q0-5, and GMAC 0/1 HW TX Q0-5
-+ * They have same descriptor numbers.
-+ * The base address and descriptor number are configured at
-+ * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004)
-+ **********************************************************************/
-+#define TOE_SW_FREEQ_DESC_POWER		10
-+#define TOE_SW_FREEQ_DESC_NUM		(1<y) ? x :y)
-+#define TX_DESC_NUM					_max(TOE_GMAC0_SWTXQ_DESC_NUM, TOE_GMAC1_SWTXQ_DESC_NUM)
-+
-+#define RWPTR_ADVANCE_ONE(x, max)	((x == (max -1)) ? 0 : x+1)
-+#define RWPTR_RECEDE_ONE(x, max)	((x == 0) ? (max -1) : x-1)
-+#define SET_WPTR(addr, data)		(*(volatile u16 * const)((u32)(addr)+2) = (u16)data)
-+#define SET_RPTR(addr, data)		(*(volatile u16 * const)((u32)(addr)) = (u16)data)
-+
-+/**********************************************************************
-+ * Global registers
-+ * #define TOE_GLOBAL_BASE			(TOE_BASE + 0x0000)
-+ * Base 0x60000000
-+ **********************************************************************/
-+#define GLOBAL_TOE_VERSION_REG			0x0000
-+#define GLOBAL_SW_FREEQ_BASE_SIZE_REG	0x0004
-+#define GLOBAL_HW_FREEQ_BASE_SIZE_REG	0x0008
-+#define GLOBAL_DMA_SKB_SIZE_REG			0x0010
-+#define GLOBAL_SWFQ_RWPTR_REG			0x0014
-+#define GLOBAL_HWFQ_RWPTR_REG			0x0018
-+#define GLOBAL_INTERRUPT_STATUS_0_REG	0x0020
-+#define GLOBAL_INTERRUPT_ENABLE_0_REG	0x0024
-+#define GLOBAL_INTERRUPT_SELECT_0_REG	0x0028
-+#define GLOBAL_INTERRUPT_STATUS_1_REG	0x0030
-+#define GLOBAL_INTERRUPT_ENABLE_1_REG	0x0034
-+#define GLOBAL_INTERRUPT_SELECT_1_REG	0x0038
-+#define GLOBAL_INTERRUPT_STATUS_2_REG	0x0040
-+#define GLOBAL_INTERRUPT_ENABLE_2_REG	0x0044
-+#define GLOBAL_INTERRUPT_SELECT_2_REG	0x0048
-+#define GLOBAL_INTERRUPT_STATUS_3_REG	0x0050
-+#define GLOBAL_INTERRUPT_ENABLE_3_REG	0x0054
-+#define GLOBAL_INTERRUPT_SELECT_3_REG	0x0058
-+#define GLOBAL_INTERRUPT_STATUS_4_REG	0x0060
-+#define GLOBAL_INTERRUPT_ENABLE_4_REG	0x0064
-+#define GLOBAL_INTERRUPT_SELECT_4_REG	0x0068
-+#define GLOBAL_HASH_TABLE_BASE_REG		0x006C
-+#define GLOBAL_QUEUE_THRESHOLD_REG		0x0070
-+
-+/**********************************************************************
-+ * GMAC 0/1 DMA/TOE register
-+ * #define TOE_GMAC0_DMA_BASE		(TOE_BASE + 0x8000)
-+ * #define TOE_GMAC1_DMA_BASE		(TOE_BASE + 0xC000)
-+ * Base 0x60008000 or 0x6000C000
-+ **********************************************************************/
-+#define GMAC_DMA_CTRL_REG				0x0000
-+#define GMAC_TX_WEIGHTING_CTRL_0_REG	0x0004
-+#define GMAC_TX_WEIGHTING_CTRL_1_REG	0x0008
-+#define GMAC_SW_TX_QUEUE0_PTR_REG		0x000C
-+#define GMAC_SW_TX_QUEUE1_PTR_REG		0x0010
-+#define GMAC_SW_TX_QUEUE2_PTR_REG		0x0014
-+#define GMAC_SW_TX_QUEUE3_PTR_REG		0x0018
-+#define GMAC_SW_TX_QUEUE4_PTR_REG		0x001C
-+#define GMAC_SW_TX_QUEUE5_PTR_REG		0x0020
-+#define GMAC_HW_TX_QUEUE0_PTR_REG		0x0024
-+#define GMAC_HW_TX_QUEUE1_PTR_REG		0x0028
-+#define GMAC_HW_TX_QUEUE2_PTR_REG		0x002C
-+#define GMAC_HW_TX_QUEUE3_PTR_REG		0x0030
-+#define GMAC_DMA_TX_FIRST_DESC_REG		0x0038
-+#define GMAC_DMA_TX_CURR_DESC_REG		0x003C
-+#define GMAC_DMA_TX_DESC_WORD0_REG		0x0040
-+#define GMAC_DMA_TX_DESC_WORD1_REG		0x0044
-+#define GMAC_DMA_TX_DESC_WORD2_REG		0x0048
-+#define GMAC_DMA_TX_DESC_WORD3_REG		0x004C
-+#define GMAC_SW_TX_QUEUE_BASE_REG		0x0050
-+#define GMAC_HW_TX_QUEUE_BASE_REG		0x0054
-+#define GMAC_DMA_RX_FIRST_DESC_REG		0x0058
-+#define GMAC_DMA_RX_CURR_DESC_REG		0x005C
-+#define GMAC_DMA_RX_DESC_WORD0_REG		0x0060
-+#define GMAC_DMA_RX_DESC_WORD1_REG		0x0064
-+#define GMAC_DMA_RX_DESC_WORD2_REG		0x0068
-+#define GMAC_DMA_RX_DESC_WORD3_REG		0x006C
-+#define GMAC_HASH_ENGINE_REG0			0x0070
-+#define GMAC_HASH_ENGINE_REG1			0x0074
-+#define GMAC_MR0CR0						0x0078 	// matching rule 0 Control register 0
-+#define GMAC_MR0CR1						0x007C	// matching rule 0 Control register 1
-+#define GMAC_MR0CR2						0x0080	// matching rule 0 Control register 2
-+#define GMAC_MR1CR0						0x0084	// matching rule 1 Control register 0
-+#define GMAC_MR1CR1						0x0088	// matching rule 1 Control register 1
-+#define GMAC_MR1CR2						0x008C	// matching rule 1 Control register 2
-+#define GMAC_MR2CR0						0x0090	// matching rule 2 Control register 0
-+#define GMAC_MR2CR1						0x0094	// matching rule 2 Control register 1
-+#define GMAC_MR2CR2						0x0098	// matching rule 2 Control register 2
-+#define GMAC_MR3CR0						0x009C	// matching rule 3 Control register 0
-+#define GMAC_MR3CR1						0x00A0	// matching rule 3 Control register 1
-+#define GMAC_MR3CR2						0x00A4	// matching rule 3 Control register 2
-+#define GMAC_SPR0						0x00A8	// Support Protocol Regsister 0
-+#define GMAC_SPR1						0x00AC	// Support Protocol Regsister 1
-+#define GMAC_SPR2						0x00B0	// Support Protocol Regsister 2
-+#define GMAC_SPR3						0x00B4	// Support Protocol Regsister 3
-+#define GMAC_SPR4						0x00B8	// Support Protocol Regsister 4
-+#define GMAC_SPR5						0x00BC	// Support Protocol Regsister 5
-+#define GMAC_SPR6						0x00C0	// Support Protocol Regsister 6
-+#define GMAC_SPR7						0x00C4	// Support Protocol Regsister 7
-+#define GMAC_AHB_WEIGHT_REG				0x00C8	// GMAC Hash/Rx/Tx AHB Weighting register
-+
-+/**********************************************************************
-+ * TOE GMAC 0/1 register
-+ * #define TOE_GMAC0_BASE				(TOE_BASE + 0xA000)
-+ * #define TOE_GMAC1_BASE				(TOE_BASE + 0xE000)
-+ * Base 0x6000A000 or 0x6000E000
-+ **********************************************************************/
-+enum GMAC_REGISTER {
-+	GMAC_STA_ADD0 	= 0x0000,
-+	GMAC_STA_ADD1	= 0x0004,
-+	GMAC_STA_ADD2	= 0x0008,
-+	GMAC_RX_FLTR	= 0x000c,
-+	GMAC_MCAST_FIL0 = 0x0010,
-+	GMAC_MCAST_FIL1 = 0x0014,
-+	GMAC_CONFIG0	= 0x0018,
-+	GMAC_CONFIG1	= 0x001c,
-+	GMAC_CONFIG2	= 0x0020,
-+	GMAC_CONFIG3	= 0x0024,
-+	GMAC_RESERVED	= 0x0028,
-+	GMAC_STATUS		= 0x002c,
-+	GMAC_IN_DISCARDS= 0x0030,
-+	GMAC_IN_ERRORS  = 0x0034,
-+	GMAC_IN_MCAST   = 0x0038,
-+	GMAC_IN_BCAST   = 0x003c,
-+	GMAC_IN_MAC1    = 0x0040,	// for STA 1 MAC Address
-+	GMAC_IN_MAC2    = 0x0044	// for STA 2 MAC Address
-+};
-+/**********************************************************************
-+ * TOE version Register (offset 0x0000)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int reserved		: 15;	// bit 31:17
-+		unsigned int v_bit_mode		: 1;	// bit 16		1: 128-entry
-+		unsigned int device_id		: 12;	// bit 15:4 	Device ID
-+		unsigned int revision_id	: 4;	// bit  3:0 	Revision ID
-+#else
-+		unsigned int revision_id	: 4;	// bit  3:0 	Revision ID
-+		unsigned int device_id		: 12;	// bit 15:4 	Device ID
-+		unsigned int v_bit_mode		: 1;	// bit 16		1: 128-entry
-+		unsigned int reserved		: 15;	// bit 31:17
-+#endif
-+	} bits;
-+} TOE_VERSION_T;
-+
-+
-+/**********************************************************************
-+ * DMA Queues description Ring Base Address/Size Register (offset 0x0004)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int base_size;
-+} DMA_Q_BASE_SIZE_T;
-+#define DMA_Q_BASE_MASK 	(~0x0f)
-+
-+/**********************************************************************
-+ * DMA SKB Buffer register (offset 0x0008)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0008
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int hw_skb_size	: 16;	// bit 31:16	HW Free poll SKB Size
-+		unsigned int sw_skb_size	: 16;	// bit 15:0 	SW Free poll SKB Size
-+#else
-+		unsigned int sw_skb_size	: 16;	// bit 15:0 	SW Free poll SKB Size
-+		unsigned int hw_skb_size	: 16;	// bit 31:16	HW Free poll SKB Size
-+#endif
-+	} bits;
-+} DMA_SKB_SIZE_T;
-+
-+/**********************************************************************
-+ * DMA SW Free Queue Read/Write Pointer Register (offset 0x000C)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_000c
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int wptr			: 16;	// bit 31:16 	Write Ptr, RW
-+		unsigned int rptr			: 16;	// bit 15:0		Read Ptr, RO
-+#else
-+		unsigned int rptr			: 16;	// bit 15:0		Read Ptr, RO
-+		unsigned int wptr			: 16;	// bit 31:16 	Write Ptr, RW
-+#endif
-+	} bits;
-+} DMA_RWPTR_T;
-+
-+/**********************************************************************
-+ * DMA HW Free Queue Read/Write Pointer Register (offset 0x0010)
-+ **********************************************************************/
-+// see DMA_RWPTR_T structure
-+
-+/**********************************************************************
-+ * Interrupt Status Register 0 	(offset 0x0020)
-+ * Interrupt Mask Register 0 	(offset 0x0024)
-+ * Interrupt Select Register 0 	(offset 0x0028)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0020
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int txDerr1		: 1;	// bit 31	GMAC1 AHB Bus Error while Tx
-+		unsigned int txPerr1		: 1;	// bit 30	GMAC1 Tx Descriptor Protocol Error
-+		unsigned int txDerr0		: 1;	// bit 29	GMAC0 AHB Bus Error while Tx
-+		unsigned int txPerr0		: 1;	// bit 28	GMAC0 Tx Descriptor Protocol Error
-+		unsigned int rxDerr1		: 1;	// bit 27	GMAC1 AHB Bus Error while Rx
-+		unsigned int rxPerr1		: 1;	// bit 26	GMAC1 Rx Descriptor Protocol Error
-+		unsigned int rxDerr0		: 1;	// bit 25	GMAC0 AHB Bus Error while Rx
-+		unsigned int rxPerr0		: 1;	// bit 24	GMAC0 Rx Descriptor Protocol Error
-+		unsigned int swtq15_fin		: 1;	// bit 23	GMAC1 SW Tx Queue 5 Finish Interrupt
-+		unsigned int swtq14_fin		: 1;	// bit 22	GMAC1 SW Tx Queue 4 Finish Interrupt
-+		unsigned int swtq13_fin		: 1;	// bit 21	GMAC1 SW Tx Queue 3 Finish Interrupt
-+		unsigned int swtq12_fin		: 1;	// bit 20	GMAC1 SW Tx Queue 2 Finish Interrupt
-+		unsigned int swtq11_fin		: 1;	// bit 19	GMAC1 SW Tx Queue 1 Finish Interrupt
-+		unsigned int swtq10_fin		: 1;	// bit 18	GMAC1 SW Tx Queue 0 Finish Interrupt
-+		unsigned int swtq05_fin		: 1;	// bit 17	GMAC0 SW Tx Queue 5 Finish Interrupt
-+		unsigned int swtq04_fin		: 1;	// bit 16	GMAC0 SW Tx Queue 4 Finish Interrupt
-+		unsigned int swtq03_fin		: 1;	// bit 15	GMAC0 SW Tx Queue 3 Finish Interrupt
-+		unsigned int swtq02_fin		: 1;	// bit 14	GMAC0 SW Tx Queue 2 Finish Interrupt
-+		unsigned int swtq01_fin		: 1;	// bit 13	GMAC0 SW Tx Queue 1 Finish Interrupt
-+		unsigned int swtq00_fin		: 1;	// bit 12	GMAC0 SW Tx Queue 0 Finish Interrupt
-+		unsigned int swtq15_eof		: 1;	// bit 11	GMAC1 SW Tx Queue 5 EOF Interrupt
-+		unsigned int swtq14_eof		: 1;	// bit 10	GMAC1 SW Tx Queue 4 EOF Interrupt
-+		unsigned int swtq13_eof		: 1;	// bit 9	GMAC1 SW Tx Queue 3 EOF Interrupt
-+		unsigned int swtq12_eof		: 1;	// bit 8	GMAC1 SW Tx Queue 2 EOF Interrupt
-+		unsigned int swtq11_eof		: 1;	// bit 7	GMAC1 SW Tx Queue 1 EOF Interrupt
-+		unsigned int swtq10_eof		: 1;	// bit 6	GMAC1 SW Tx Queue 0 EOF Interrupt
-+		unsigned int swtq05_eof		: 1;	// bit 5	GMAC0 SW Tx Queue 5 EOF Interrupt
-+		unsigned int swtq04_eof		: 1;	// bit 4	GMAC0 SW Tx Queue 4 EOF Interrupt
-+		unsigned int swtq03_eof		: 1;	// bit 3	GMAC0 SW Tx Queue 3 EOF Interrupt
-+		unsigned int swtq02_eof		: 1;	// bit 2	GMAC0 SW Tx Queue 2 EOF Interrupt
-+		unsigned int swtq01_eof		: 1;	// bit 1	GMAC0 SW Tx Queue 1 EOF Interrupt
-+		unsigned int swtq00_eof		: 1;	// bit 0	GMAC0 SW Tx Queue 0 EOF Interrupt
-+#else
-+		unsigned int swtq00_eof		: 1;	// bit 0	GMAC0 SW Tx Queue 0 EOF Interrupt
-+		unsigned int swtq01_eof		: 1;	// bit 1	GMAC0 SW Tx Queue 1 EOF Interrupt
-+		unsigned int swtq02_eof		: 1;	// bit 2	GMAC0 SW Tx Queue 2 EOF Interrupt
-+		unsigned int swtq03_eof		: 1;	// bit 3	GMAC0 SW Tx Queue 3 EOF Interrupt
-+		unsigned int swtq04_eof		: 1;	// bit 4	GMAC0 SW Tx Queue 4 EOF Interrupt
-+		unsigned int swtq05_eof		: 1;	// bit 5	GMAC0 SW Tx Queue 5 EOF Interrupt
-+		unsigned int swtq10_eof		: 1;	// bit 6	GMAC1 SW Tx Queue 0 EOF Interrupt
-+		unsigned int swtq11_eof		: 1;	// bit 7	GMAC1 SW Tx Queue 1 EOF Interrupt
-+		unsigned int swtq12_eof		: 1;	// bit 8	GMAC1 SW Tx Queue 2 EOF Interrupt
-+		unsigned int swtq13_eof		: 1;	// bit 9	GMAC1 SW Tx Queue 3 EOF Interrupt
-+		unsigned int swtq14_eof		: 1;	// bit 10	GMAC1 SW Tx Queue 4 EOF Interrupt
-+		unsigned int swtq15_eof		: 1;	// bit 11	GMAC1 SW Tx Queue 5 EOF Interrupt
-+		unsigned int swtq00_fin		: 1;	// bit 12	GMAC0 SW Tx Queue 0 Finish Interrupt
-+		unsigned int swtq01_fin		: 1;	// bit 13	GMAC0 SW Tx Queue 1 Finish Interrupt
-+		unsigned int swtq02_fin		: 1;	// bit 14	GMAC0 SW Tx Queue 2 Finish Interrupt
-+		unsigned int swtq03_fin		: 1;	// bit 15	GMAC0 SW Tx Queue 3 Finish Interrupt
-+		unsigned int swtq04_fin		: 1;	// bit 16	GMAC0 SW Tx Queue 4 Finish Interrupt
-+		unsigned int swtq05_fin		: 1;	// bit 17	GMAC0 SW Tx Queue 5 Finish Interrupt
-+		unsigned int swtq10_fin		: 1;	// bit 18	GMAC1 SW Tx Queue 0 Finish Interrupt
-+		unsigned int swtq11_fin		: 1;	// bit 19	GMAC1 SW Tx Queue 1 Finish Interrupt
-+		unsigned int swtq12_fin		: 1;	// bit 20	GMAC1 SW Tx Queue 2 Finish Interrupt
-+		unsigned int swtq13_fin		: 1;	// bit 21	GMAC1 SW Tx Queue 3 Finish Interrupt
-+		unsigned int swtq14_fin		: 1;	// bit 22	GMAC1 SW Tx Queue 4 Finish Interrupt
-+		unsigned int swtq15_fin		: 1;	// bit 23	GMAC1 SW Tx Queue 5 Finish Interrupt
-+		unsigned int rxPerr0		: 1;	// bit 24	GMAC0 Rx Descriptor Protocol Error
-+		unsigned int rxDerr0		: 1;	// bit 25	GMAC0 AHB Bus Error while Rx
-+		unsigned int rxPerr1		: 1;	// bit 26	GMAC1 Rx Descriptor Protocol Error
-+		unsigned int rxDerr1		: 1;	// bit 27	GMAC1 AHB Bus Error while Rx
-+		unsigned int txPerr0		: 1;	// bit 28	GMAC0 Tx Descriptor Protocol Error
-+		unsigned int txDerr0		: 1;	// bit 29	GMAC0 AHB Bus Error while Tx
-+		unsigned int txPerr1		: 1;	// bit 30	GMAC1 Tx Descriptor Protocol Error
-+		unsigned int txDerr1		: 1;	// bit 31	GMAC1 AHB Bus Error while Tx
-+#endif
-+	} bits;
-+} INTR_REG0_T;
-+
-+#define GMAC1_TXDERR_INT_BIT		BIT(31)
-+#define GMAC1_TXPERR_INT_BIT		BIT(30)
-+#define GMAC0_TXDERR_INT_BIT		BIT(29)
-+#define GMAC0_TXPERR_INT_BIT		BIT(28)
-+#define GMAC1_RXDERR_INT_BIT		BIT(27)
-+#define GMAC1_RXPERR_INT_BIT		BIT(26)
-+#define GMAC0_RXDERR_INT_BIT		BIT(25)
-+#define GMAC0_RXPERR_INT_BIT		BIT(24)
-+#define GMAC1_SWTQ15_FIN_INT_BIT	BIT(23)
-+#define GMAC1_SWTQ14_FIN_INT_BIT	BIT(22)
-+#define GMAC1_SWTQ13_FIN_INT_BIT	BIT(21)
-+#define GMAC1_SWTQ12_FIN_INT_BIT	BIT(20)
-+#define GMAC1_SWTQ11_FIN_INT_BIT	BIT(19)
-+#define GMAC1_SWTQ10_FIN_INT_BIT	BIT(18)
-+#define GMAC0_SWTQ05_FIN_INT_BIT	BIT(17)
-+#define GMAC0_SWTQ04_FIN_INT_BIT	BIT(16)
-+#define GMAC0_SWTQ03_FIN_INT_BIT	BIT(15)
-+#define GMAC0_SWTQ02_FIN_INT_BIT	BIT(14)
-+#define GMAC0_SWTQ01_FIN_INT_BIT	BIT(13)
-+#define GMAC0_SWTQ00_FIN_INT_BIT	BIT(12)
-+#define GMAC1_SWTQ15_EOF_INT_BIT	BIT(11)
-+#define GMAC1_SWTQ14_EOF_INT_BIT	BIT(10)
-+#define GMAC1_SWTQ13_EOF_INT_BIT	BIT(9)
-+#define GMAC1_SWTQ12_EOF_INT_BIT	BIT(8)
-+#define GMAC1_SWTQ11_EOF_INT_BIT	BIT(7)
-+#define GMAC1_SWTQ10_EOF_INT_BIT	BIT(6)
-+#define GMAC0_SWTQ05_EOF_INT_BIT	BIT(5)
-+#define GMAC0_SWTQ04_EOF_INT_BIT	BIT(4)
-+#define GMAC0_SWTQ03_EOF_INT_BIT	BIT(3)
-+#define GMAC0_SWTQ02_EOF_INT_BIT	BIT(2)
-+#define GMAC0_SWTQ01_EOF_INT_BIT	BIT(1)
-+#define GMAC0_SWTQ00_EOF_INT_BIT	BIT(0)
-+
-+
-+/**********************************************************************
-+ * Interrupt Status Register 1 	(offset 0x0030)
-+ * Interrupt Mask Register 1 	(offset 0x0034)
-+ * Interrupt Select Register 1 	(offset 0x0038)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0030
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int toe_iq3_full	: 1;	// bit 31	TOE Interrupt Queue 3 Full Interrupt
-+		unsigned int toe_iq2_full	: 1;	// bit 30	TOE Interrupt Queue 2 Full Interrupt
-+		unsigned int toe_iq1_full	: 1;	// bit 29	TOE Interrupt Queue 1 Full Interrupt
-+		unsigned int toe_iq0_full	: 1;	// bit 28	TOE Interrupt Queue 0 Full Interrupt
-+		unsigned int toe_iq3_intr	: 1;	// bit 27	TOE Interrupt Queue 3 with Interrupts
-+		unsigned int toe_iq2_intr	: 1;	// bit 26	TOE Interrupt Queue 2 with Interrupts
-+		unsigned int toe_iq1_intr	: 1;	// bit 25	TOE Interrupt Queue 1 with Interrupts
-+		unsigned int toe_iq0_intr	: 1;	// bit 24	TOE Interrupt Queue 0 with Interrupts
-+		unsigned int hwtq13_eof		: 1;	// bit 23	GMAC1 HW Tx Queue3 EOF Interrupt
-+		unsigned int hwtq12_eof		: 1;	// bit 22	GMAC1 HW Tx Queue2 EOF Interrupt
-+		unsigned int hwtq11_eof		: 1;	// bit 21	GMAC1 HW Tx Queue1 EOF Interrupt
-+		unsigned int hwtq10_eof		: 1;	// bit 20	GMAC1 HW Tx Queue0 EOF Interrupt
-+		unsigned int hwtq03_eof		: 1;	// bit 19	GMAC0 HW Tx Queue3 EOF Interrupt
-+		unsigned int hwtq02_eof		: 1;	// bit 18	GMAC0 HW Tx Queue2 EOF Interrupt
-+		unsigned int hwtq01_eof		: 1;	// bit 17	GMAC0 HW Tx Queue1 EOF Interrupt
-+		unsigned int hwtq00_eof		: 1;	// bit 16	GMAC0 HW Tx Queue0 EOF Interrupt
-+		unsigned int class_rx		: 14;	// bit 15:2	Classification Queue Rx Interrupt
-+		unsigned int default_q1_eof	: 1;	// bit 1	Default Queue 1 EOF Interrupt
-+		unsigned int default_q0_eof	: 1;	// bit 0	Default Queue 0 EOF Interrupt
-+#else
-+		unsigned int default_q0_eof	: 1;	// bit 0	Default Queue 0 EOF Interrupt
-+		unsigned int default_q1_eof	: 1;	// bit 1	Default Queue 1 EOF Interrupt
-+		unsigned int class_rx		: 14;	// bit 15:2	Classification Queue Rx Interrupt
-+		unsigned int hwtq00_eof		: 1;	// bit 16	GMAC0 HW Tx Queue0 EOF Interrupt
-+		unsigned int hwtq01_eof		: 1;	// bit 17	GMAC0 HW Tx Queue1 EOF Interrupt
-+		unsigned int hwtq02_eof		: 1;	// bit 18	GMAC0 HW Tx Queue2 EOF Interrupt
-+		unsigned int hwtq03_eof		: 1;	// bit 19	GMAC0 HW Tx Queue3 EOF Interrupt
-+		unsigned int hwtq10_eof		: 1;	// bit 20	GMAC1 HW Tx Queue0 EOF Interrupt
-+		unsigned int hwtq11_eof		: 1;	// bit 21	GMAC1 HW Tx Queue1 EOF Interrupt
-+		unsigned int hwtq12_eof		: 1;	// bit 22	GMAC1 HW Tx Queue2 EOF Interrupt
-+		unsigned int hwtq13_eof		: 1;	// bit 23	GMAC1 HW Tx Queue3 EOF Interrupt
-+		unsigned int toe_iq0_intr	: 1;	// bit 24	TOE Interrupt Queue 0 with Interrupts
-+		unsigned int toe_iq1_intr	: 1;	// bit 25	TOE Interrupt Queue 1 with Interrupts
-+		unsigned int toe_iq2_intr	: 1;	// bit 26	TOE Interrupt Queue 2 with Interrupts
-+		unsigned int toe_iq3_intr	: 1;	// bit 27	TOE Interrupt Queue 3 with Interrupts
-+		unsigned int toe_iq0_full	: 1;	// bit 28	TOE Interrupt Queue 0 Full Interrupt
-+		unsigned int toe_iq1_full	: 1;	// bit 29	TOE Interrupt Queue 1 Full Interrupt
-+		unsigned int toe_iq2_full	: 1;	// bit 30	TOE Interrupt Queue 2 Full Interrupt
-+		unsigned int toe_iq3_full	: 1;	// bit 31	TOE Interrupt Queue 3 Full Interrupt
-+#endif
-+	} bits;
-+} INTR_REG1_T;
-+
-+#define TOE_IQ3_FULL_INT_BIT		BIT(31)
-+#define TOE_IQ2_FULL_INT_BIT		BIT(30)
-+#define TOE_IQ1_FULL_INT_BIT		BIT(29)
-+#define TOE_IQ0_FULL_INT_BIT		BIT(28)
-+#define TOE_IQ3_INT_BIT				BIT(27)
-+#define TOE_IQ2_INT_BIT				BIT(26)
-+#define TOE_IQ1_INT_BIT				BIT(25)
-+#define TOE_IQ0_INT_BIT				BIT(24)
-+#define GMAC1_HWTQ13_EOF_INT_BIT	BIT(23)
-+#define GMAC1_HWTQ12_EOF_INT_BIT	BIT(22)
-+#define GMAC1_HWTQ11_EOF_INT_BIT	BIT(21)
-+#define GMAC1_HWTQ10_EOF_INT_BIT	BIT(20)
-+#define GMAC0_HWTQ03_EOF_INT_BIT	BIT(19)
-+#define GMAC0_HWTQ02_EOF_INT_BIT	BIT(18)
-+#define GMAC0_HWTQ01_EOF_INT_BIT	BIT(17)
-+#define GMAC0_HWTQ00_EOF_INT_BIT	BIT(16)
-+#define CLASS_RX_INT_BIT(x)			BIT((x+2))
-+#define DEFAULT_Q1_INT_BIT			BIT(1)
-+#define DEFAULT_Q0_INT_BIT			BIT(0)
-+
-+#define TOE_IQ_INT_BITS				(TOE_IQ0_INT_BIT | TOE_IQ1_INT_BIT | \
-+		               	 			TOE_IQ2_INT_BIT | TOE_IQ3_INT_BIT)
-+#define	TOE_IQ_FULL_BITS			(TOE_IQ0_FULL_INT_BIT | TOE_IQ1_FULL_INT_BIT | \
-+		                	 		TOE_IQ2_FULL_INT_BIT | TOE_IQ3_FULL_INT_BIT)
-+#define	TOE_IQ_ALL_BITS				(TOE_IQ_INT_BITS | TOE_IQ_FULL_BITS)
-+#define TOE_CLASS_RX_INT_BITS		0xfffc
-+
-+/**********************************************************************
-+ * Interrupt Status Register 2 	(offset 0x0040)
-+ * Interrupt Mask Register 2 	(offset 0x0044)
-+ * Interrupt Select Register 2 	(offset 0x0048)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0040
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int toe_q31_full	: 1;	// bit 31	TOE Queue 31 Full Interrupt
-+		unsigned int toe_q30_full	: 1;	// bit 30	TOE Queue 30 Full Interrupt
-+		unsigned int toe_q29_full	: 1;	// bit 29	TOE Queue 29 Full Interrupt
-+		unsigned int toe_q28_full	: 1;	// bit 28	TOE Queue 28 Full Interrupt
-+		unsigned int toe_q27_full	: 1;	// bit 27	TOE Queue 27 Full Interrupt
-+		unsigned int toe_q26_full	: 1;	// bit 26	TOE Queue 26 Full Interrupt
-+		unsigned int toe_q25_full	: 1;	// bit 25	TOE Queue 25 Full Interrupt
-+		unsigned int toe_q24_full	: 1;	// bit 24	TOE Queue 24 Full Interrupt
-+		unsigned int toe_q23_full	: 1;	// bit 23	TOE Queue 23 Full Interrupt
-+		unsigned int toe_q22_full	: 1;	// bit 22	TOE Queue 22 Full Interrupt
-+		unsigned int toe_q21_full	: 1;	// bit 21	TOE Queue 21 Full Interrupt
-+		unsigned int toe_q20_full	: 1;	// bit 20	TOE Queue 20 Full Interrupt
-+		unsigned int toe_q19_full	: 1;	// bit 19	TOE Queue 19 Full Interrupt
-+		unsigned int toe_q18_full	: 1;	// bit 18	TOE Queue 18 Full Interrupt
-+		unsigned int toe_q17_full	: 1;	// bit 17	TOE Queue 17 Full Interrupt
-+		unsigned int toe_q16_full	: 1;	// bit 16	TOE Queue 16 Full Interrupt
-+		unsigned int toe_q15_full	: 1;	// bit 15	TOE Queue 15 Full Interrupt
-+		unsigned int toe_q14_full	: 1;	// bit 14	TOE Queue 14 Full Interrupt
-+		unsigned int toe_q13_full	: 1;	// bit 13	TOE Queue 13 Full Interrupt
-+		unsigned int toe_q12_full	: 1;	// bit 12	TOE Queue 12 Full Interrupt
-+		unsigned int toe_q11_full	: 1;	// bit 11	TOE Queue 11 Full Interrupt
-+		unsigned int toe_q10_full	: 1;	// bit 10	TOE Queue 10 Full Interrupt
-+		unsigned int toe_q9_full	: 1;	// bit 9	TOE Queue 9 Full Interrupt
-+		unsigned int toe_q8_full	: 1;	// bit 8	TOE Queue 8 Full Interrupt
-+		unsigned int toe_q7_full	: 1;	// bit 7	TOE Queue 7 Full Interrupt
-+		unsigned int toe_q6_full	: 1;	// bit 6	TOE Queue 6 Full Interrupt
-+		unsigned int toe_q5_full	: 1;	// bit 5	TOE Queue 5 Full Interrupt
-+		unsigned int toe_q4_full	: 1;	// bit 4	TOE Queue 4 Full Interrupt
-+		unsigned int toe_q3_full	: 1;	// bit 3	TOE Queue 3 Full Interrupt
-+		unsigned int toe_q2_full	: 1;	// bit 2	TOE Queue 2 Full Interrupt
-+		unsigned int toe_q1_full	: 1;	// bit 1	TOE Queue 1 Full Interrupt
-+		unsigned int toe_q0_full	: 1;	// bit 0	TOE Queue 0 Full Interrupt
-+#else
-+		unsigned int toe_q0_full	: 1;	// bit 0	TOE Queue 0 Full Interrupt
-+		unsigned int toe_q1_full	: 1;	// bit 1	TOE Queue 1 Full Interrupt
-+		unsigned int toe_q2_full	: 1;	// bit 2	TOE Queue 2 Full Interrupt
-+		unsigned int toe_q3_full	: 1;	// bit 3	TOE Queue 3 Full Interrupt
-+		unsigned int toe_q4_full	: 1;	// bit 4	TOE Queue 4 Full Interrupt
-+		unsigned int toe_q5_full	: 1;	// bit 5	TOE Queue 5 Full Interrupt
-+		unsigned int toe_q6_full	: 1;	// bit 6	TOE Queue 6 Full Interrupt
-+		unsigned int toe_q7_full	: 1;	// bit 7	TOE Queue 7 Full Interrupt
-+		unsigned int toe_q8_full	: 1;	// bit 8	TOE Queue 8 Full Interrupt
-+		unsigned int toe_q9_full	: 1;	// bit 9	TOE Queue 9 Full Interrupt
-+		unsigned int toe_q10_full	: 1;	// bit 10	TOE Queue 10 Full Interrupt
-+		unsigned int toe_q11_full	: 1;	// bit 11	TOE Queue 11 Full Interrupt
-+		unsigned int toe_q12_full	: 1;	// bit 12	TOE Queue 12 Full Interrupt
-+		unsigned int toe_q13_full	: 1;	// bit 13	TOE Queue 13 Full Interrupt
-+		unsigned int toe_q14_full	: 1;	// bit 14	TOE Queue 14 Full Interrupt
-+		unsigned int toe_q15_full	: 1;	// bit 15	TOE Queue 15 Full Interrupt
-+		unsigned int toe_q16_full	: 1;	// bit 16	TOE Queue 16 Full Interrupt
-+		unsigned int toe_q17_full	: 1;	// bit 17	TOE Queue 17 Full Interrupt
-+		unsigned int toe_q18_full	: 1;	// bit 18	TOE Queue 18 Full Interrupt
-+		unsigned int toe_q19_full	: 1;	// bit 19	TOE Queue 19 Full Interrupt
-+		unsigned int toe_q20_full	: 1;	// bit 20	TOE Queue 20 Full Interrupt
-+		unsigned int toe_q21_full	: 1;	// bit 21	TOE Queue 21 Full Interrupt
-+		unsigned int toe_q22_full	: 1;	// bit 22	TOE Queue 22 Full Interrupt
-+		unsigned int toe_q23_full	: 1;	// bit 23	TOE Queue 23 Full Interrupt
-+		unsigned int toe_q24_full	: 1;	// bit 24	TOE Queue 24 Full Interrupt
-+		unsigned int toe_q25_full	: 1;	// bit 25	TOE Queue 25 Full Interrupt
-+		unsigned int toe_q26_full	: 1;	// bit 26	TOE Queue 26 Full Interrupt
-+		unsigned int toe_q27_full	: 1;	// bit 27	TOE Queue 27 Full Interrupt
-+		unsigned int toe_q28_full	: 1;	// bit 28	TOE Queue 28 Full Interrupt
-+		unsigned int toe_q29_full	: 1;	// bit 29	TOE Queue 29 Full Interrupt
-+		unsigned int toe_q30_full	: 1;	// bit 30	TOE Queue 30 Full Interrupt
-+		unsigned int toe_q31_full	: 1;	// bit 31	TOE Queue 31 Full Interrupt
-+#endif
-+	} bits;
-+} INTR_REG2_T;
-+
-+#define TOE_QL_FULL_INT_BIT(x)		BIT(x)
-+
-+/**********************************************************************
-+ * Interrupt Status Register 3 	(offset 0x0050)
-+ * Interrupt Mask Register 3 	(offset 0x0054)
-+ * Interrupt Select Register 3 	(offset 0x0058)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0050
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int toe_q63_full	: 1;	// bit 63	TOE Queue 63 Full Interrupt
-+		unsigned int toe_q62_full	: 1;	// bit 62	TOE Queue 62 Full Interrupt
-+		unsigned int toe_q61_full	: 1;	// bit 61	TOE Queue 61 Full Interrupt
-+		unsigned int toe_q60_full	: 1;	// bit 60	TOE Queue 60 Full Interrupt
-+		unsigned int toe_q59_full	: 1;	// bit 59	TOE Queue 59 Full Interrupt
-+		unsigned int toe_q58_full	: 1;	// bit 58	TOE Queue 58 Full Interrupt
-+		unsigned int toe_q57_full	: 1;	// bit 57	TOE Queue 57 Full Interrupt
-+		unsigned int toe_q56_full	: 1;	// bit 56	TOE Queue 56 Full Interrupt
-+		unsigned int toe_q55_full	: 1;	// bit 55	TOE Queue 55 Full Interrupt
-+		unsigned int toe_q54_full	: 1;	// bit 54	TOE Queue 54 Full Interrupt
-+		unsigned int toe_q53_full	: 1;	// bit 53	TOE Queue 53 Full Interrupt
-+		unsigned int toe_q52_full	: 1;	// bit 52	TOE Queue 52 Full Interrupt
-+		unsigned int toe_q51_full	: 1;	// bit 51	TOE Queue 51 Full Interrupt
-+		unsigned int toe_q50_full	: 1;	// bit 50	TOE Queue 50 Full Interrupt
-+		unsigned int toe_q49_full	: 1;	// bit 49	TOE Queue 49 Full Interrupt
-+		unsigned int toe_q48_full	: 1;	// bit 48	TOE Queue 48 Full Interrupt
-+		unsigned int toe_q47_full	: 1;	// bit 47	TOE Queue 47 Full Interrupt
-+		unsigned int toe_q46_full	: 1;	// bit 46	TOE Queue 46 Full Interrupt
-+		unsigned int toe_q45_full	: 1;	// bit 45	TOE Queue 45 Full Interrupt
-+		unsigned int toe_q44_full	: 1;	// bit 44	TOE Queue 44 Full Interrupt
-+		unsigned int toe_q43_full	: 1;	// bit 43	TOE Queue 43 Full Interrupt
-+		unsigned int toe_q42_full	: 1;	// bit 42	TOE Queue 42 Full Interrupt
-+		unsigned int toe_q41_full	: 1;	// bit 41	TOE Queue 41 Full Interrupt
-+		unsigned int toe_q40_full	: 1;	// bit 40	TOE Queue 40 Full Interrupt
-+		unsigned int toe_q39_full	: 1;	// bit 39 	TOE Queue 39 Full Interrupt
-+		unsigned int toe_q38_full	: 1;	// bit 38	TOE Queue 38 Full Interrupt
-+		unsigned int toe_q37_full	: 1;	// bit 37	TOE Queue 37 Full Interrupt
-+		unsigned int toe_q36_full	: 1;	// bit 36	TOE Queue 36 Full Interrupt
-+		unsigned int toe_q35_full	: 1;	// bit 35	TOE Queue 35 Full Interrupt
-+		unsigned int toe_q34_full	: 1;	// bit 34	TOE Queue 34 Full Interrupt
-+		unsigned int toe_q33_full	: 1;	// bit 33	TOE Queue 33 Full Interrupt
-+		unsigned int toe_q32_full	: 1;	// bit 32	TOE Queue 32 Full Interrupt
-+#else
-+		unsigned int toe_q32_full	: 1;	// bit 32	TOE Queue 32 Full Interrupt
-+		unsigned int toe_q33_full	: 1;	// bit 33	TOE Queue 33 Full Interrupt
-+		unsigned int toe_q34_full	: 1;	// bit 34	TOE Queue 34 Full Interrupt
-+		unsigned int toe_q35_full	: 1;	// bit 35	TOE Queue 35 Full Interrupt
-+		unsigned int toe_q36_full	: 1;	// bit 36	TOE Queue 36 Full Interrupt
-+		unsigned int toe_q37_full	: 1;	// bit 37	TOE Queue 37 Full Interrupt
-+		unsigned int toe_q38_full	: 1;	// bit 38	TOE Queue 38 Full Interrupt
-+		unsigned int toe_q39_full	: 1;	// bit 39	TOE Queue 39 Full Interrupt
-+		unsigned int toe_q40_full	: 1;	// bit 40	TOE Queue 40 Full Interrupt
-+		unsigned int toe_q41_full	: 1;	// bit 41	TOE Queue 41 Full Interrupt
-+		unsigned int toe_q42_full	: 1;	// bit 42	TOE Queue 42 Full Interrupt
-+		unsigned int toe_q43_full	: 1;	// bit 43	TOE Queue 43 Full Interrupt
-+		unsigned int toe_q44_full	: 1;	// bit 44	TOE Queue 44 Full Interrupt
-+		unsigned int toe_q45_full	: 1;	// bit 45	TOE Queue 45 Full Interrupt
-+		unsigned int toe_q46_full	: 1;	// bit 46	TOE Queue 46 Full Interrupt
-+		unsigned int toe_q47_full	: 1;	// bit 47	TOE Queue 47 Full Interrupt
-+		unsigned int toe_q48_full	: 1;	// bit 48	TOE Queue 48 Full Interrupt
-+		unsigned int toe_q49_full	: 1;	// bit 49	TOE Queue 49 Full Interrupt
-+		unsigned int toe_q50_full	: 1;	// bit 50	TOE Queue 50 Full Interrupt
-+		unsigned int toe_q51_full	: 1;	// bit 51	TOE Queue 51 Full Interrupt
-+		unsigned int toe_q52_full	: 1;	// bit 52	TOE Queue 52 Full Interrupt
-+		unsigned int toe_q53_full	: 1;	// bit 53	TOE Queue 53 Full Interrupt
-+		unsigned int toe_q54_full	: 1;	// bit 54	TOE Queue 54 Full Interrupt
-+		unsigned int toe_q55_full	: 1;	// bit 55	TOE Queue 55 Full Interrupt
-+		unsigned int toe_q56_full	: 1;	// bit 56	TOE Queue 56 Full Interrupt
-+		unsigned int toe_q57_full	: 1;	// bit 57	TOE Queue 57 Full Interrupt
-+		unsigned int toe_q58_full	: 1;	// bit 58	TOE Queue 58 Full Interrupt
-+		unsigned int toe_q59_full	: 1;	// bit 59	TOE Queue 59 Full Interrupt
-+		unsigned int toe_q60_full	: 1;	// bit 60	TOE Queue 60 Full Interrupt
-+		unsigned int toe_q61_full	: 1;	// bit 61	TOE Queue 61 Full Interrupt
-+		unsigned int toe_q62_full	: 1;	// bit 62	TOE Queue 62 Full Interrupt
-+		unsigned int toe_q63_full	: 1;	// bit 63	TOE Queue 63 Full Interrupt
-+#endif
-+	} bits;
-+} INTR_REG3_T;
-+
-+#define TOE_QH_FULL_INT_BIT(x)		BIT(x-32)
-+
-+/**********************************************************************
-+ * Interrupt Status Register 4 	(offset 0x0060)
-+ * Interrupt Mask Register 4 	(offset 0x0064)
-+ * Interrupt Select Register 4 	(offset 0x0068)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned char byte;
-+	struct bit_0060
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned char reserved		: 1;	//
-+		unsigned char cnt_full 		: 1;	// MIB counters half full interrupt
-+		unsigned char rx_pause_on	: 1;	// received pause on frame interrupt
-+		unsigned char tx_pause_on	: 1;	// transmit pause on frame interrupt
-+		unsigned char rx_pause_off  : 1;	// received pause off frame interrupt
-+		unsigned char tx_pause_off	: 1;	// received pause off frame interrupt
-+		unsigned char rx_overrun	: 1;    // GMAC Rx FIFO overrun interrupt
-+		unsigned char status_changed: 1;	// Status Changed Intr for RGMII Mode
-+#else
-+		unsigned char status_changed: 1;	// Status Changed Intr for RGMII Mode
-+		unsigned char rx_overrun	: 1;   // GMAC Rx FIFO overrun interrupt
-+		unsigned char tx_pause_off	: 1;	// received pause off frame interrupt
-+		unsigned char rx_pause_off  : 1;	// received pause off frame interrupt
-+		unsigned char tx_pause_on	: 1;	// transmit pause on frame interrupt
-+		unsigned char rx_pause_on	: 1;	// received pause on frame interrupt
-+		unsigned char cnt_full 		: 1;	// MIB counters half full interrupt
-+		unsigned char reserved		: 1;	//
-+#endif
-+	} _PACKED_ bits;
-+} _PACKED_ GMAC_INTR_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0060_2
-+	{
-+#if (BIG_ENDIAN==1)
-+		GMAC_INTR_T		gmac1;
-+		GMAC_INTR_T		gmac0;
-+		unsigned int	class_qf_int: 14;	// bit 15:2 Classification Rx Queue13-0 Full Intr.
-+		unsigned int    hwfq_empty	: 1;	// bit 1	Hardware Free Queue Empty Intr.
-+		unsigned int    swfq_empty	: 1;	// bit 0	Software Free Queue Empty Intr.
-+#else
-+#endif
-+		unsigned int    swfq_empty	: 1;	// bit 0	Software Free Queue Empty Intr.
-+		unsigned int    hwfq_empty	: 1;	// bit 1	Hardware Free Queue Empty Intr.
-+		unsigned int	class_qf_int: 14;	// bit 15:2 Classification Rx Queue13-0 Full Intr.
-+		GMAC_INTR_T		gmac0;
-+		GMAC_INTR_T		gmac1;
-+	} bits;
-+} INTR_REG4_T;
-+
-+#define GMAC1_RESERVED_INT_BIT		BIT(31)
-+#define GMAC1_MIB_INT_BIT			BIT(30)
-+#define GMAC1_RX_PAUSE_ON_INT_BIT	BIT(29)
-+#define GMAC1_TX_PAUSE_ON_INT_BIT	BIT(28)
-+#define GMAC1_RX_PAUSE_OFF_INT_BIT	BIT(27)
-+#define GMAC1_TX_PAUSE_OFF_INT_BIT	BIT(26)
-+#define GMAC1_RX_OVERRUN_INT_BIT	BIT(25)
-+#define GMAC1_STATUS_CHANGE_INT_BIT	BIT(24)
-+#define GMAC0_RESERVED_INT_BIT		BIT(23)
-+#define GMAC0_MIB_INT_BIT			BIT(22)
-+#define GMAC0_RX_PAUSE_ON_INT_BIT	BIT(21)
-+#define GMAC0_TX_PAUSE_ON_INT_BIT	BIT(20)
-+#define GMAC0_RX_PAUSE_OFF_INT_BIT	BIT(19)
-+#define GMAC0_TX_PAUSE_OFF_INT_BIT	BIT(18)
-+#define GMAC0_RX_OVERRUN_INT_BIT	BIT(17)
-+#define GMAC0_STATUS_CHANGE_INT_BIT	BIT(16)
-+#define CLASS_RX_FULL_INT_BIT(x)	BIT((x+2))
-+#define HWFQ_EMPTY_INT_BIT			BIT(1)
-+#define SWFQ_EMPTY_INT_BIT			BIT(0)
-+
-+#if 1
-+#define GMAC0_INT_BITS				(GMAC0_MIB_INT_BIT)
-+#define GMAC1_INT_BITS				(GMAC1_MIB_INT_BIT)
-+#else
-+#define GMAC0_INT_BITS				(GMAC0_RESERVED_INT_BIT | GMAC0_MIB_INT_BIT | \
-+									 GMAC0_RX_PAUSE_ON_INT_BIT | GMAC0_TX_PAUSE_ON_INT_BIT |	\
-+									 GMAC0_RX_PAUSE_OFF_INT_BIT | GMAC0_TX_PAUSE_OFF_INT_BIT | 	\
-+									 GMAC0_RX_OVERRUN_INT_BIT | GMAC0_STATUS_CHANGE_INT_BIT)
-+#define GMAC1_INT_BITS				(GMAC1_RESERVED_INT_BIT | GMAC1_MIB_INT_BIT | \
-+									 GMAC1_RX_PAUSE_ON_INT_BIT | GMAC1_TX_PAUSE_ON_INT_BIT |	\
-+									 GMAC1_RX_PAUSE_OFF_INT_BIT | GMAC1_TX_PAUSE_OFF_INT_BIT | 	\
-+									 GMAC1_RX_OVERRUN_INT_BIT | GMAC1_STATUS_CHANGE_INT_BIT)
-+#endif
-+
-+#define CLASS_RX_FULL_INT_BITS		0xfffc
-+
-+/**********************************************************************
-+ * GLOBAL_QUEUE_THRESHOLD_REG 	(offset 0x0070)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0070_2
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	toe_class	: 8;	// 31:24
-+		unsigned int	intrq		: 8;	// 23:16
-+		unsigned int    hwfq_empty	: 8;	// 15:8		Hardware Free Queue Empty Threshold
-+		unsigned int    swfq_empty	: 8;	//  7:0  	Software Free Queue Empty Threshold
-+#else
-+#endif
-+		unsigned int    swfq_empty	: 8;	//  7:0  	Software Free Queue Empty Threshold
-+		unsigned int    hwfq_empty	: 8;	// 15:8		Hardware Free Queue Empty Threshold
-+		unsigned int	intrq		: 8;	// 23:16
-+		unsigned int	toe_class	: 8;	// 31:24
-+	} bits;
-+} QUEUE_THRESHOLD_T;
-+
-+
-+/**********************************************************************
-+ * GMAC DMA Control Register
-+ * GMAC0 offset 0x8000
-+ * GMAC1 offset 0xC000
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8000
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    rd_enable		: 1;	// bit 31	Rx DMA Enable
-+		unsigned int    td_enable		: 1;	// bit 30	Tx DMA Enable
-+		unsigned int    loopback		: 1;	// bit 29	Loopback TxDMA to RxDMA
-+		unsigned int    drop_small_ack	: 1;	// bit 28	1: Drop, 0: Accept
-+		unsigned int	reserved		: 10;	// bit 27:18
-+		unsigned int	rd_insert_bytes	: 2;	// bit 17:16
-+		unsigned int	rd_prot			: 4;	// bit 15:12 DMA Protection Control
-+		unsigned int	rd_burst_size	: 2;	// bit 11:10 DMA max burst size for every AHB request
-+		unsigned int	rd_bus		    : 2;	// bit 9:8 	Peripheral Bus Width
-+		unsigned int	td_prot			: 4;	// bit 7:4  TxDMA protection control
-+		unsigned int	td_burst_size	: 2;	// bit 3:2	TxDMA max burst size for every AHB request
-+		unsigned int	td_bus		    : 2;	// bit 1:0  Peripheral Bus Width
-+#else
-+		unsigned int	td_bus		    : 2;	// bit 1:0  Peripheral Bus Width
-+		unsigned int	td_burst_size	: 2;	// bit 3:2	TxDMA max burst size for every AHB request
-+		unsigned int	td_prot			: 4;	// bit 7:4  TxDMA protection control
-+		unsigned int	rd_bus		    : 2;	// bit 9:8 	Peripheral Bus Width
-+		unsigned int	rd_burst_size	: 2;	// bit 11:10 DMA max burst size for every AHB request
-+		unsigned int	rd_prot			: 4;	// bit 15:12 DMA Protection Control
-+		unsigned int	rd_insert_bytes	: 2;	// bit 17:16
-+		unsigned int	reserved		: 10;	// bit 27:18
-+		unsigned int    drop_small_ack	: 1;	// bit 28	1: Drop, 0: Accept
-+		unsigned int    loopback		: 1;	// bit 29	Loopback TxDMA to RxDMA
-+		unsigned int    td_enable		: 1;	// bit 30	Tx DMA Enable
-+		unsigned int    rd_enable		: 1;	// bit 31	Rx DMA Enable
-+#endif
-+	} bits;
-+} GMAC_DMA_CTRL_T;
-+
-+/**********************************************************************
-+ * GMAC Tx Weighting Control Register 0
-+ * GMAC0 offset 0x8004
-+ * GMAC1 offset 0xC004
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8004
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    reserved		: 8;	// bit 31:24
-+		unsigned int    hw_tq3			: 6;	// bit 23:18	HW TX Queue 0
-+		unsigned int    hw_tq2			: 6;	// bit 17:12	HW TX Queue 1
-+		unsigned int    hw_tq1			: 6;	// bit 11:6		HW TX Queue 2
-+		unsigned int    hw_tq0			: 6;	// bit 5:0		HW TX Queue 3
-+#else
-+		unsigned int    hw_tq0			: 6;	// bit 5:0		HW TX Queue 3
-+		unsigned int    hw_tq1			: 6;	// bit 11:6		HW TX Queue 2
-+		unsigned int    hw_tq2			: 6;	// bit 17:12	HW TX Queue 1
-+		unsigned int    hw_tq3			: 6;	// bit 23:18	HW TX Queue 0
-+		unsigned int    reserved		: 8;	// bit 31:24
-+#endif
-+	} bits;
-+} GMAC_TX_WCR0_T;	// Weighting Control Register 0
-+
-+/**********************************************************************
-+ * GMAC Tx Weighting Control Register 1
-+ * GMAC0 offset 0x8008
-+ * GMAC1 offset 0xC008
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8008
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    reserved		: 2;	// bit 31:30
-+		unsigned int    sw_tq5			: 5;	// bit 29:25	SW TX Queue 5
-+		unsigned int    sw_tq4			: 5;	// bit 24:20	SW TX Queue 4
-+		unsigned int    sw_tq3			: 5;	// bit 19:15	SW TX Queue 3
-+		unsigned int    sw_tq2			: 5;	// bit 14:10	SW TX Queue 2
-+		unsigned int    sw_tq1			: 5;	// bit 9:5		SW TX Queue 1
-+		unsigned int    sw_tq0			: 5;	// bit 4:0		SW TX Queue 0
-+#else
-+		unsigned int    sw_tq0			: 5;	// bit 4:0		SW TX Queue 0
-+		unsigned int    sw_tq1			: 5;	// bit 9:5		SW TX Queue 1
-+		unsigned int    sw_tq2			: 5;	// bit 14:10	SW TX Queue 2
-+		unsigned int    sw_tq3			: 5;	// bit 19:15	SW TX Queue 3
-+		unsigned int    sw_tq4			: 5;	// bit 24:20	SW TX Queue 4
-+		unsigned int    sw_tq5			: 5;	// bit 29:25	SW TX Queue 5
-+		unsigned int    reserved		: 2;	// bit 31:30
-+#endif
-+	} bits;
-+} GMAC_TX_WCR1_T;	// Weighting Control Register 1
-+
-+/**********************************************************************
-+ * Queue Read/Write Pointer
-+ * GMAC SW TX Queue 0~5 Read/Write Pointer register
-+ * GMAC0 offset 0x800C ~ 0x8020
-+ * GMAC1 offset 0xC00C ~ 0xC020
-+ * GMAC HW TX Queue 0~3 Read/Write Pointer register
-+ * GMAC0 offset 0x8024 ~ 0x8030
-+ * GMAC1 offset 0xC024 ~ 0xC030
-+ **********************************************************************/
-+// see DMA_RWPTR_T structure
-+
-+/**********************************************************************
-+ * GMAC DMA Tx First Description Address Register
-+ * GMAC0 offset 0x8038
-+ * GMAC1 offset 0xC038
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8038
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int td_first_des_ptr	: 28;	// bit 31:4	first descriptor address
-+		unsigned int td_busy			:  1;	// bit 3	1: TxDMA busy; 0: TxDMA idle
-+		unsigned int reserved			:  3;
-+#else
-+		unsigned int reserved			:  3;
-+		unsigned int td_busy			:  1;	// bit 3	1: TxDMA busy; 0: TxDMA idle
-+		unsigned int td_first_des_ptr	: 28;	// bit 31:4	first descriptor address
-+#endif
-+	} bits;
-+} GMAC_TXDMA_FIRST_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Current Description Address Register
-+ * GMAC0 offset 0x803C
-+ * GMAC1 offset 0xC03C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_803C
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int td_curr_desc_ptr	: 28;	// bit 31:4	current descriptor address
-+		unsigned int reserved			:  4;
-+#else
-+		unsigned int reserved			:  4;
-+		unsigned int td_curr_desc_ptr	: 28;	// bit 31:4	current descriptor address
-+#endif
-+	} bits;
-+} GMAC_TXDMA_CURR_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 0 Register
-+ * GMAC0 offset 0x8040
-+ * GMAC1 offset 0xC040
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8040
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int reserved		: 1;	// bit 31
-+		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
-+		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
-+		unsigned int status_rvd		: 6;	// bit 28:23 Tx Status, Reserved bits
-+		unsigned int status_tx_ok	: 1;	// bit 22    Tx Status, 1: Successful 0: Failed
-+		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
-+		unsigned int buffer_size 	: 16;	// bit 15:0  Transfer size
-+#else
-+		unsigned int buffer_size 	: 16;	// bit 15:0  Transfer size
-+		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
-+		unsigned int status_tx_ok	: 1;	// bit 22    Tx Status, 1: Successful 0: Failed
-+		unsigned int status_rvd		: 6;	// bit 28:23 Tx Status, Reserved bits
-+		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
-+		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
-+		unsigned int reserved		: 1;	// bit 31
-+#endif
-+	} bits;
-+} GMAC_TXDESC_0_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 1 Register
-+ * GMAC0 offset 0x8044
-+ * GMAC1 offset 0xC044
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct txdesc_word1
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	reserved	: 9;	// bit 31:23 	Tx Flag, Reserved
-+		unsigned int	ip_fixed_len: 1;	// bit 22
-+		unsigned int	bypass_tss	: 1;	// bit 21
-+		unsigned int	udp_chksum	: 1;	// bit 20		UDP Checksum Enable
-+		unsigned int	tcp_chksum	: 1;	// bit 19		TCP Checksum Enable
-+		unsigned int	ipv6_enable	: 1;	// bit 18		IPV6 Tx Enable
-+		unsigned int	ip_chksum	: 1;	// bit 17		IPV4 Header Checksum Enable
-+		unsigned int	mtu_enable	: 1;	// bit 16		TSS segmentation use MTU setting
-+		unsigned int	byte_count	: 16;	// bit 15: 0	Tx Frame Byte Count
-+#else
-+		unsigned int	byte_count	: 16;	// bit 15: 0	Tx Frame Byte Count
-+		unsigned int	mtu_enable	: 1;	// bit 16		TSS segmentation use MTU setting
-+		unsigned int	ip_chksum	: 1;	// bit 17		IPV4 Header Checksum Enable
-+		unsigned int	ipv6_enable	: 1;	// bit 18		IPV6 Tx Enable
-+		unsigned int	tcp_chksum	: 1;	// bit 19		TCP Checksum Enable
-+		unsigned int	udp_chksum	: 1;	// bit 20		UDP Checksum Enable
-+		unsigned int	bypass_tss	: 1;	// bit 21
-+		unsigned int	ip_fixed_len: 1;	// bit 22
-+		unsigned int	reserved	: 9;	// bit 31:23 	Tx Flag, Reserved
-+#endif
-+	} bits;
-+} GMAC_TXDESC_1_T;
-+
-+#define TSS_IP_FIXED_LEN_BIT	BIT(22)
-+#define TSS_UDP_CHKSUM_BIT		BIT(20)
-+#define TSS_TCP_CHKSUM_BIT		BIT(19)
-+#define TSS_IPV6_ENABLE_BIT		BIT(18)
-+#define TSS_IP_CHKSUM_BIT		BIT(17)
-+#define TSS_MTU_ENABLE_BIT		BIT(16)
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 2 Register
-+ * GMAC0 offset 0x8048
-+ * GMAC1 offset 0xC048
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int	bits32;
-+	unsigned int 	buf_adr;
-+} GMAC_TXDESC_2_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 3 Register
-+ * GMAC0 offset 0x804C
-+ * GMAC1 offset 0xC04C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct txdesc_word3
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
-+		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
-+		unsigned int	reserved	: 18;	// bit 28:11
-+		unsigned int	mtu_size	: 11;	// bit 10: 0	Tx Frame Byte Count
-+#else
-+		unsigned int	mtu_size	: 11;	// bit 10: 0	Tx Frame Byte Count
-+		unsigned int	reserved	: 18;	// bit 28:11
-+		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
-+		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
-+#endif
-+	} bits;
-+} GMAC_TXDESC_3_T;
-+#define SOF_EOF_BIT_MASK	0x3fffffff
-+#define SOF_BIT				0x80000000
-+#define EOF_BIT				0x40000000
-+#define EOFIE_BIT			BIT(29)
-+#define MTU_SIZE_BIT_MASK	0x7ff
-+
-+/**********************************************************************
-+ * GMAC Tx Descriptor
-+ **********************************************************************/
-+typedef struct
-+{
-+	GMAC_TXDESC_0_T	word0;
-+	GMAC_TXDESC_1_T	word1;
-+	GMAC_TXDESC_2_T	word2;
-+	GMAC_TXDESC_3_T	word3;
-+} GMAC_TXDESC_T;
-+
-+
-+/**********************************************************************
-+ * GMAC DMA Rx First Description Address Register
-+ * GMAC0 offset 0x8058
-+ * GMAC1 offset 0xC058
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8058
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rd_first_des_ptr	: 28;	// bit 31:4 first descriptor address
-+		unsigned int rd_busy			:  1;	// bit 3	1-RxDMA busy; 0-RxDMA idle
-+		unsigned int reserved			:  3;	// bit 2:0
-+#else
-+		unsigned int reserved			:  3;	// bit 2:0
-+		unsigned int rd_busy			:  1;	// bit 3	1-RxDMA busy; 0-RxDMA idle
-+		unsigned int rd_first_des_ptr	: 28;	// bit 31:4 first descriptor address
-+#endif
-+	} bits;
-+} GMAC_RXDMA_FIRST_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Current Description Address Register
-+ * GMAC0 offset 0x805C
-+ * GMAC1 offset 0xC05C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_805C
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rd_curr_des_ptr	: 28;	// bit 31:4 current descriptor address
-+		unsigned int reserved			:  4;	// bit 3:0
-+#else
-+		unsigned int reserved			:  4;	// bit 3:0
-+		unsigned int rd_curr_des_ptr	: 28;	// bit 31:4 current descriptor address
-+#endif
-+	} bits;
-+} GMAC_RXDMA_CURR_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 0 Register
-+ * GMAC0 offset 0x8060
-+ * GMAC1 offset 0xC060
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8060
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int drop			: 1;	// bit 31	 TOE/CIS Queue Full dropped packet to default queue
-+		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
-+		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
-+		unsigned int chksum_status	: 3;	// bit 28:26 Check Sum Status
-+		unsigned int status			: 4;	// bit 24:22 Status of rx frame
-+		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
-+		unsigned int buffer_size 	: 16;	// bit 15:0  number of descriptors used for the current frame
-+#else
-+		unsigned int buffer_size 	: 16;	// bit 15:0  number of descriptors used for the current frame
-+		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
-+		unsigned int status			: 4;	// bit 24:22 Status of rx frame
-+		unsigned int chksum_status	: 3;	// bit 28:26 Check Sum Status
-+		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
-+		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
-+		unsigned int drop			: 1;	// bit 31	 TOE/CIS Queue Full dropped packet to default queue
-+#endif
-+	} bits;
-+} GMAC_RXDESC_0_T;
-+
-+#define		GMAC_RXDESC_0_T_derr				BIT(30)
-+#define		GMAC_RXDESC_0_T_perr				BIT(29)
-+#define		GMAC_RXDESC_0_T_chksum_status(x)	BIT((x+26))
-+#define		GMAC_RXDESC_0_T_status(x)			BIT((x+22))
-+#define		GMAC_RXDESC_0_T_desc_count(x)		BIT((x+16))
-+
-+#define	RX_CHKSUM_IP_UDP_TCP_OK			0
-+#define	RX_CHKSUM_IP_OK_ONLY			1
-+#define	RX_CHKSUM_NONE					2
-+#define	RX_CHKSUM_IP_ERR_UNKNOWN		4
-+#define	RX_CHKSUM_IP_ERR				5
-+#define	RX_CHKSUM_TCP_UDP_ERR			6
-+#define RX_CHKSUM_NUM					8
-+
-+#define RX_STATUS_GOOD_FRAME			0
-+#define RX_STATUS_TOO_LONG_GOOD_CRC		1
-+#define RX_STATUS_RUNT_FRAME			2
-+#define RX_STATUS_SFD_NOT_FOUND			3
-+#define RX_STATUS_CRC_ERROR				4
-+#define RX_STATUS_TOO_LONG_BAD_CRC		5
-+#define RX_STATUS_ALIGNMENT_ERROR		6
-+#define RX_STATUS_TOO_LONG_BAD_ALIGN	7
-+#define RX_STATUS_RX_ERR				8
-+#define RX_STATUS_DA_FILTERED			9
-+#define RX_STATUS_BUFFER_FULL			10
-+#define RX_STATUS_NUM					16
-+
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 1 Register
-+ * GMAC0 offset 0x8064
-+ * GMAC1 offset 0xC064
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct rxdesc_word1
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	sw_id		: 16;	// bit 31:16	Software ID
-+		unsigned int	byte_count	: 16;	// bit 15: 0	Rx Frame Byte Count
-+#else
-+		unsigned int	byte_count	: 16;	// bit 15: 0	Rx Frame Byte Count
-+		unsigned int	sw_id		: 16;	// bit 31:16	Software ID
-+#endif
-+	} bits;
-+} GMAC_RXDESC_1_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 2 Register
-+ * GMAC0 offset 0x8068
-+ * GMAC1 offset 0xC068
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int	bits32;
-+	unsigned int	buf_adr;
-+} GMAC_RXDESC_2_T;
-+
-+#define RX_INSERT_NONE		0
-+#define RX_INSERT_1_BYTE	1
-+#define RX_INSERT_2_BYTE	2
-+#define RX_INSERT_3_BYTE	3
-+
-+#define RX_INSERT_BYTES		RX_INSERT_2_BYTE
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 3 Register
-+ * GMAC0 offset 0x806C
-+ * GMAC1 offset 0xC06C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct rxdesc_word3
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
-+		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
-+		unsigned int	ctrl_flag	: 1;	// bit 28 		Control Flag is present
-+		unsigned int	out_of_seq	: 1;	// bit 27		Out of Sequence packet
-+		unsigned int	option		: 1;	// bit 26		IPV4 option or IPV6 extension header
-+		unsigned int	abnormal	: 1;	// bit 25		abnormal case found
-+		unsigned int	dup_ack		: 1;	// bit 24		Duplicated ACK detected
-+		unsigned int	l7_offset	: 8;	// bit 23: 16	L7 data offset
-+		unsigned int	l4_offset	: 8;	// bit 15: 8	L4 data offset
-+		unsigned int	l3_offset	: 8;	// bit 7: 0		L3 data offset
-+#else
-+		unsigned int	l3_offset	: 8;	// bit 7: 0		L3 data offset
-+		unsigned int	l4_offset	: 8;	// bit 15: 8	L4 data offset
-+		unsigned int	l7_offset	: 8;	// bit 23: 16	L7 data offset
-+		unsigned int	dup_ack		: 1;	// bit 24		Duplicated ACK detected
-+		unsigned int	abnormal	: 1;	// bit 25		abnormal case found
-+		unsigned int	option		: 1;	// bit 26		IPV4 option or IPV6 extension header
-+		unsigned int	out_of_seq	: 1;	// bit 27		Out of Sequence packet
-+		unsigned int	ctrl_flag	: 1;	// bit 28 		Control Flag is present
-+		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
-+		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
-+#endif
-+	} bits;
-+} GMAC_RXDESC_3_T;
-+
-+/**********************************************************************
-+ * GMAC Rx Descriptor
-+ **********************************************************************/
-+typedef struct
-+{
-+	GMAC_RXDESC_0_T	word0;
-+	GMAC_RXDESC_1_T	word1;
-+	GMAC_RXDESC_2_T	word2;
-+	GMAC_RXDESC_3_T	word3;
-+} GMAC_RXDESC_T;
-+
-+/**********************************************************************
-+ * GMAC Hash Engine Enable/Action Register 0 Offset Register
-+ * GMAC0 offset 0x8070
-+ * GMAC1 offset 0xC070
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8070
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	mr1en		: 1;	// bit 31		Enable Matching Rule 1
-+		unsigned int	reserved1	: 1;	// bit 30
-+		unsigned int	timing		: 3;	// bit 29:27
-+		unsigned int	mr1_action	: 5;	// bit 26:22	Matching Rule 1 action offset
-+		unsigned int	mr1hel		: 6;	// bit 21:16	match rule 1 hash entry size
-+		unsigned int	mr0en		: 1;	// bit 15		Enable Matching Rule 0
-+		unsigned int	reserved0	: 4;	// bit 14:11
-+		unsigned int	mr0_action	: 5;	// bit 10:6		Matching Rule 0 action offset
-+		unsigned int	mr0hel		: 6;	// bit 5:0		match rule 0 hash entry size
-+#else
-+		unsigned int	mr0hel		: 6;	// bit 5:0		match rule 0 hash entry size
-+		unsigned int	mr0_action	: 5;	// bit 10:6		Matching Rule 0 action offset
-+		unsigned int	reserved0	: 4;	// bit 14:11
-+		unsigned int	mr0en		: 1;	// bit 15		Enable Matching Rule 0
-+		unsigned int	mr1hel		: 6;	// bit 21:16	match rule 1 hash entry size
-+		unsigned int	mr1_action	: 5;	// bit 26:22	Matching Rule 1 action offset
-+		unsigned int	timing		: 3;	// bit 29:27
-+		unsigned int	reserved1	: 1;	// bit 30
-+		unsigned int	mr1en		: 1;	// bit 31		Enable Matching Rule 1
-+#endif
-+	} bits;
-+} GMAC_HASH_ENABLE_REG0_T;
-+
-+/**********************************************************************
-+ * GMAC Hash Engine Enable/Action Register 1 Offset Register
-+ * GMAC0 offset 0x8074
-+ * GMAC1 offset 0xC074
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8074
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	mr3en		: 1;	// bit 31		Enable Matching Rule 3
-+		unsigned int	reserved3	: 4;	// bit 30:27
-+		unsigned int	mr3_action	: 5;	// bit 26:22	Matching Rule 3 action offset
-+		unsigned int	mr3hel		: 6;	// bit 21:16	match rule 3 hash entry size
-+		unsigned int	mr2en		: 1;	// bit 15		Enable Matching Rule 2
-+		unsigned int	reserved2	: 4;	// bit 14:11
-+		unsigned int	mr2_action	: 5;	// bit 10:6		Matching Rule 2 action offset
-+		unsigned int	mr2hel		: 6;	// bit 5:0		match rule 2 hash entry size
-+#else
-+		unsigned int	mr2hel		: 6;	// bit 5:0		match rule 2 hash entry size
-+		unsigned int	mr2_action	: 5;	// bit 10:6		Matching Rule 2 action offset
-+		unsigned int	reserved2	: 4;	// bit 14:11
-+		unsigned int	mr2en		: 1;	// bit 15		Enable Matching Rule 2
-+		unsigned int	mr3hel		: 6;	// bit 21:16	match rule 3 hash entry size
-+		unsigned int	mr3_action	: 5;	// bit 26:22	Matching Rule 3 action offset
-+		unsigned int	reserved1	: 4;	// bit 30:27
-+		unsigned int	mr3en		: 1;	// bit 31		Enable Matching Rule 3
-+#endif
-+	} bits;
-+} GMAC_HASH_ENABLE_REG1_T;
-+
-+
-+/**********************************************************************
-+ * GMAC Matching Rule Control Register 0
-+ * GMAC0 offset 0x8078
-+ * GMAC1 offset 0xC078
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8078
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	l2			: 1;	// bit 31		L2 matching enable
-+		unsigned int	l3			: 1;	// bit 30		L3 matching enable
-+		unsigned int	l4			: 1;	// bit 29		L4 matching enable
-+		unsigned int	l7			: 1;	// bit 28		L7 matching enable
-+		unsigned int	port		: 1;	// bit 27		PORT ID matching enable
-+		unsigned int	priority	: 3;	// bit 26:24	priority if multi-rules matched
-+		unsigned int	da			: 1;	// bit 23		MAC DA enable
-+		unsigned int	sa			: 1;	// bit 22		MAC SA enable
-+		unsigned int	ether_type	: 1;	// bit 21		Ethernet type enable
-+		unsigned int	vlan		: 1;	// bit 20		VLAN ID enable
-+		unsigned int	pppoe		: 1;	// bit 19		PPPoE Session ID enable
-+		unsigned int	reserved1	: 3;	// bit 18:16
-+		unsigned int	ip_version	: 1;	// bit 15		0: IPV4, 1: IPV6
-+		unsigned int	ip_hdr_len	: 1;	// bit 14		IPV4 Header length
-+		unsigned int	flow_lable	: 1;	// bit 13		IPV6 Flow label
-+		unsigned int	tos_traffic	: 1;	// bit 12		IPV4 TOS or IPV6 Traffice Class
-+		unsigned int	reserved2	: 4;	// bit 11:8
-+		unsigned int	sprx		: 8;	// bit 7:0		Support Protocol Register 7:0
-+#else
-+		unsigned int	sprx		: 8;	// bit 7:0		Support Protocol Register 7:0
-+		unsigned int	reserved2	: 4;	// bit 11:8
-+		unsigned int	tos_traffic	: 1;	// bit 12		IPV4 TOS or IPV6 Traffice Class
-+		unsigned int	flow_lable	: 1;	// bit 13		IPV6 Flow label
-+		unsigned int	ip_hdr_len	: 1;	// bit 14		IPV4 Header length
-+		unsigned int	ip_version	: 1;	// bit 15		0: IPV4, 1: IPV6
-+		unsigned int	reserved1	: 3;	// bit 18:16
-+		unsigned int	pppoe		: 1;	// bit 19		PPPoE Session ID enable
-+		unsigned int	vlan		: 1;	// bit 20		VLAN ID enable
-+		unsigned int	ether_type	: 1;	// bit 21		Ethernet type enable
-+		unsigned int	sa			: 1;	// bit 22		MAC SA enable
-+		unsigned int	da			: 1;	// bit 23		MAC DA enable
-+		unsigned int	priority	: 3;	// bit 26:24	priority if multi-rules matched
-+		unsigned int	port		: 1;	// bit 27		PORT ID matching enable
-+		unsigned int	l7			: 1;	// bit 28		L7 matching enable
-+		unsigned int	l4			: 1;	// bit 29		L4 matching enable
-+		unsigned int	l3			: 1;	// bit 30		L3 matching enable
-+		unsigned int	l2			: 1;	// bit 31		L2 matching enable
-+#endif
-+	} bits;
-+} GMAC_MRxCR0_T;
-+
-+#define MR_L2_BIT			BIT(31)
-+#define MR_L3_BIT			BIT(30)
-+#define MR_L4_BIT			BIT(29)
-+#define MR_L7_BIT			BIT(28)
-+#define MR_PORT_BIT			BIT(27)
-+#define MR_PRIORITY_BIT		BIT(26)
-+#define MR_DA_BIT			BIT(23)
-+#define MR_SA_BIT			BIT(22)
-+#define MR_ETHER_TYPE_BIT	BIT(21)
-+#define MR_VLAN_BIT			BIT(20)
-+#define MR_PPPOE_BIT		BIT(19)
-+#define MR_IP_VER_BIT		BIT(15)
-+#define MR_IP_HDR_LEN_BIT	BIT(14)
-+#define MR_FLOW_LABLE_BIT	BIT(13)
-+#define MR_TOS_TRAFFIC_BIT	BIT(12)
-+#define MR_SPR_BIT(x)		BIT(x)
-+#define MR_SPR_BITS		0xff
-+
-+/**********************************************************************
-+ * GMAC Matching Rule Control Register 1
-+ * GMAC0 offset 0x807C
-+ * GMAC1 offset 0xC07C
-+ **********************************************************************/
-+ typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_807C
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	sip			: 1;	// bit 31		Srce IP
-+		unsigned int	sip_netmask	: 7;	// bit 30:24	Srce IP net mask, number of mask bits
-+		unsigned int	dip			: 1;	// bit 23		Dest IP
-+		unsigned int	dip_netmask	: 7;	// bit 22:16	Dest IP net mask, number of mask bits
-+		unsigned int    l4_byte0_15	: 16;	// bit 15: 0
-+#else
-+		unsigned int    l4_byte0_15	: 16;	// bit 15: 0
-+		unsigned int	dip_netmask	: 7;	// bit 22:16	Dest IP net mask, number of mask bits
-+		unsigned int	dip			: 1;	// bit 23		Dest IP
-+		unsigned int	sip_netmask	: 7;	// bit 30:24	Srce IP net mask, number of mask bits
-+		unsigned int	sip			: 1;	// bit 31		Srce IP
-+#endif
-+	} bits;
-+} GMAC_MRxCR1_T;
-+
-+/**********************************************************************
-+ * GMAC Matching Rule Control Register 2
-+ * GMAC0 offset 0x8080
-+ * GMAC1 offset 0xC080
-+ **********************************************************************/
-+ typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8080
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    l4_byte16_24: 8;	// bit 31: 24
-+		unsigned int    l7_byte0_23	: 24;	// bit 23:0
-+#else
-+		unsigned int    l7_byte0_23	: 24;	// bit 23:0
-+		unsigned int    l4_byte16_24: 8;	// bit 31: 24
-+#endif
-+	} bits;
-+} GMAC_MRxCR2_T;
-+
-+
-+/**********************************************************************
-+ * GMAC Support registers
-+ * GMAC0 offset 0x80A8
-+ * GMAC1 offset 0xC0A8
-+ **********************************************************************/
-+ typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_80A8
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    reserved: 21;	// bit 31:11
-+		unsigned int    swap	: 3;	// bit 10:8		Swap
-+		unsigned int    protocol: 8;	// bit 7:0		Supported protocol
-+#else
-+		unsigned int    protocol: 8;	// bit 7:0		Supported protocol
-+		unsigned int    swap	: 3;	// bit 10:8		Swap
-+		unsigned int    reserved: 21;	// bit 31:11
-+#endif
-+	} bits;
-+} GMAC_SPR_T;
-+
-+/**********************************************************************
-+ * GMAC_AHB_WEIGHT registers
-+ * GMAC0 offset 0x80C8
-+ * GMAC1 offset 0xC0C8
-+ **********************************************************************/
-+ typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_80C8
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    reserved		: 7;	// 31:25
-+		unsigned int    tqDV_threshold	: 5;	// 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
-+		unsigned int    pre_req			: 5;	// 19:15 Rx Data Pre Request FIFO Threshold
-+		unsigned int    tx_weight		: 5;	// 14:10
-+		unsigned int    rx_weight		: 5;	// 9:5
-+		unsigned int    hash_weight		: 5;	// 4:0
-+#else
-+		unsigned int    hash_weight		: 5;	// 4:0
-+		unsigned int    rx_weight		: 5;	// 9:5
-+		unsigned int    tx_weight		: 5;	// 14:10
-+		unsigned int    pre_req			: 5;	// 19:15 Rx Data Pre Request FIFO Threshold
-+		unsigned int    tqDV_threshold	: 5;	// 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
-+		unsigned int    reserved		: 7;	// 31:25
-+#endif
-+	} bits;
-+} GMAC_AHB_WEIGHT_T;
-+/**********************************************************************
-+ * the register structure of GMAC
-+ **********************************************************************/
-+
-+/**********************************************************************
-+ * GMAC RX FLTR
-+ * GMAC0 Offset 0xA00C
-+ * GMAC1 Offset 0xE00C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_000c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int 				: 27;
-+		unsigned int error			:  1;	/* enable receive of all error frames */
-+		unsigned int promiscuous	:  1;   /* enable receive of all frames */
-+		unsigned int broadcast		:  1;	/* enable receive of broadcast frames */
-+		unsigned int multicast		:  1;	/* enable receive of multicast frames that pass multicast filter */
-+		unsigned int unicast		:  1;	/* enable receive of unicast frames that are sent to STA address */
-+#else
-+		unsigned int unicast		:  1;	/* enable receive of unicast frames that are sent to STA address */
-+		unsigned int multicast		:  1;	/* enable receive of multicast frames that pass multicast filter */
-+		unsigned int broadcast		:  1;	/* enable receive of broadcast frames */
-+		unsigned int promiscuous	:  1;   /* enable receive of all frames */
-+		unsigned int error			:  1;	/* enable receive of all error frames */
-+		unsigned int 				: 27;
-+#endif
-+	} bits;
-+} GMAC_RX_FLTR_T;
-+
-+/**********************************************************************
-+ * GMAC Configuration 0
-+ * GMAC0 Offset 0xA018
-+ * GMAC1 Offset 0xE018
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0018
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int reserved		:  2;	// 31
-+		unsigned int port1_chk_classq :  1;	// 29
-+		unsigned int port0_chk_classq :  1;	// 28
-+		unsigned int port1_chk_toeq	:  1;	// 27
-+		unsigned int port0_chk_toeq	:  1;	// 26
-+		unsigned int port1_chk_hwq	:  1;	// 25
-+		unsigned int port0_chk_hwq	:  1;	// 24
-+		unsigned int rx_err_detect  :  1;	// 23
-+		unsigned int ipv6_exthdr_order: 1;	// 22
-+		unsigned int rxc_inv		:  1;	// 21
-+		unsigned int rgmm_edge		:  1;	// 20
-+        unsigned int rx_tag_remove  :  1;   /* 19: Remove Rx VLAN tag */
-+        unsigned int ipv6_rx_chksum :  1;   /* 18: IPv6 RX Checksum enable */
-+        unsigned int ipv4_rx_chksum :  1;   /* 17: IPv4 RX Checksum enable */
-+        unsigned int rgmii_en       :  1;   /* 16: RGMII in-band status enable */
-+		unsigned int tx_fc_en		:  1;	/* 15: TX flow control enable */
-+		unsigned int rx_fc_en		:  1;	/* 14: RX flow control enable */
-+		unsigned int sim_test		:  1;	/* 13: speed up timers in simulation */
-+		unsigned int dis_col		:  1;	/* 12: disable 16 collisions abort function */
-+		unsigned int dis_bkoff		:  1;	/* 11: disable back-off function */
-+		unsigned int max_len		:  3;	/* 8-10 maximum receive frame length allowed */
-+		unsigned int adj_ifg		:  4;	/* 4-7: adjust IFG from 96+/-56 */
-+        unsigned int flow_ctrl      :  1;   /* 3: flow control also trigged by Rx queues */
-+		unsigned int loop_back		:  1;	/* 2: transmit data loopback enable */
-+		unsigned int dis_rx			:  1;	/* 1: disable receive */
-+		unsigned int dis_tx			:  1;	/* 0: disable transmit */
-+#else
-+		unsigned int dis_tx			:  1;	/* 0: disable transmit */
-+		unsigned int dis_rx			:  1;	/* 1: disable receive */
-+		unsigned int loop_back		:  1;	/* 2: transmit data loopback enable */
-+        unsigned int flow_ctrl      :  1;   /* 3: flow control also trigged by Rx queues */
-+		unsigned int adj_ifg		:  4;	/* 4-7: adjust IFG from 96+/-56 */
-+		unsigned int max_len		:  3;	/* 8-10 maximum receive frame length allowed */
-+		unsigned int dis_bkoff		:  1;	/* 11: disable back-off function */
-+		unsigned int dis_col		:  1;	/* 12: disable 16 collisions abort function */
-+		unsigned int sim_test		:  1;	/* 13: speed up timers in simulation */
-+		unsigned int rx_fc_en		:  1;	/* 14: RX flow control enable */
-+		unsigned int tx_fc_en		:  1;	/* 15: TX flow control enable */
-+        unsigned int rgmii_en       :  1;   /* 16: RGMII in-band status enable */
-+        unsigned int ipv4_rx_chksum :  1;   /* 17: IPv4 RX Checksum enable */
-+        unsigned int ipv6_rx_chksum :  1;   /* 18: IPv6 RX Checksum enable */
-+        unsigned int rx_tag_remove  :  1;   /* 19: Remove Rx VLAN tag */
-+		unsigned int rgmm_edge		:  1;	// 20
-+		unsigned int rxc_inv		:  1;	// 21
-+		unsigned int ipv6_exthdr_order: 1;	// 22
-+		unsigned int rx_err_detect  :  1;	// 23
-+		unsigned int port0_chk_hwq	:  1;	// 24
-+		unsigned int port1_chk_hwq	:  1;	// 25
-+		unsigned int port0_chk_toeq	:  1;	// 26
-+		unsigned int port1_chk_toeq	:  1;	// 27
-+		unsigned int port0_chk_classq :  1;	// 28
-+		unsigned int port1_chk_classq :  1;	// 29
-+		unsigned int reserved		:  2;	// 31
-+#endif
-+	} bits;
-+} GMAC_CONFIG0_T;
-+
-+/**********************************************************************
-+ * GMAC Configuration 1
-+ * GMAC0 Offset 0xA01C
-+ * GMAC1 Offset 0xE01C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_001c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int reserved		: 16;
-+		unsigned int rel_threshold	: 8;	/* flow control release threshold */
-+		unsigned int set_threshold	: 8; 	/* flow control set threshold */
-+#else
-+		unsigned int set_threshold	: 8; 	/* flow control set threshold */
-+		unsigned int rel_threshold	: 8;	/* flow control release threshold */
-+		unsigned int reserved		: 16;
-+#endif
-+	} bits;
-+} GMAC_CONFIG1_T;
-+
-+#define GMAC_FLOWCTRL_SET_MAX		32
-+#define GMAC_FLOWCTRL_SET_MIN		0
-+#define GMAC_FLOWCTRL_RELEASE_MAX	32
-+#define GMAC_FLOWCTRL_RELEASE_MIN	0
-+
-+/**********************************************************************
-+ * GMAC Configuration 2
-+ * GMAC0 Offset 0xA020
-+ * GMAC1 Offset 0xE020
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0020
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+#else
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+#endif
-+	} bits;
-+} GMAC_CONFIG2_T;
-+
-+/**********************************************************************
-+ * GMAC Configuration 3
-+ * GMAC0 Offset 0xA024
-+ * GMAC1 Offset 0xE024
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0024
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+#else
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+#endif
-+	} bits;
-+} GMAC_CONFIG3_T;
-+
-+
-+/**********************************************************************
-+ * GMAC STATUS
-+ * GMAC0 Offset 0xA02C
-+ * GMAC1 Offset 0xE02C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_002c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int 				: 25;
-+		unsigned int mii_rmii		:  2;   /* PHY interface type */
-+		unsigned int reserved		:  1;
-+		unsigned int duplex			:  1;	/* duplex mode */
-+		unsigned int speed			:  2;	/* link speed(00->2.5M 01->25M 10->125M) */
-+		unsigned int link			:  1;	/* link status */
-+#else
-+		unsigned int link			:  1;	/* link status */
-+		unsigned int speed			:  2;	/* link speed(00->2.5M 01->25M 10->125M) */
-+		unsigned int duplex			:  1;	/* duplex mode */
-+		unsigned int reserved		:  1;
-+		unsigned int mii_rmii		:  2;   /* PHY interface type */
-+		unsigned int 				: 25;
-+#endif
-+	} bits;
-+} GMAC_STATUS_T;
-+
-+#define GMAC_SPEED_10			0
-+#define GMAC_SPEED_100			1
-+#define GMAC_SPEED_1000			2
-+
-+#define GMAC_PHY_MII			0
-+#define GMAC_PHY_GMII			1
-+#define GMAC_PHY_RGMII_100		2
-+#define GMAC_PHY_RGMII_1000		3
-+
-+/**********************************************************************
-+ * Queue Header
-+ *	(1) TOE Queue Header
-+ *	(2) Non-TOE Queue Header
-+ *	(3) Interrupt Queue Header
-+ *
-+ * memory Layout
-+ *	TOE Queue Header
-+ *	 0x60003000 +---------------------------+ 0x0000
-+ *				|     TOE Queue 0 Header	|
-+ *				|         8 * 4 Bytes	    |
-+ *				+---------------------------+ 0x0020
-+ *				|     TOE Queue 1 Header  	|
-+ *				|         8 * 4 Bytes		|
-+ *				+---------------------------+ 0x0040
-+ *				|   	......  			|
-+ *				|      						|
-+ *				+---------------------------+
-+ *
-+ *	Non TOE Queue Header
-+ *	 0x60002000 +---------------------------+ 0x0000
-+ *				|   Default Queue 0 Header  |
-+ *				|         2 * 4 Bytes		|
-+ *				+---------------------------+ 0x0008
-+ *				|   Default Queue 1 Header	|
-+ *				|         2 * 4 Bytes		|
-+ *				+---------------------------+ 0x0010
-+ *				|   Classification Queue 0	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ *				|   Classification Queue 1	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+ (n * 8 + 0x10)
-+ *				|   		...				|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+ (13 * 8 + 0x10)
-+ *				|   Classification Queue 13	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+ 0x80
-+ * 				|      Interrupt Queue 0	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ * 				|      Interrupt Queue 1	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ * 				|      Interrupt Queue 2	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ * 				|      Interrupt Queue 3	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ *
-+ **********************************************************************/
-+#define TOE_QUEUE_HDR_ADDR(n)		(TOE_TOE_QUE_HDR_BASE + n * 32)
-+#define TOE_Q_HDR_AREA_END			(TOE_QUEUE_HDR_ADDR(TOE_TOE_QUEUE_MAX+1))
-+#define TOE_DEFAULT_Q0_HDR_BASE		(TOE_NONTOE_QUE_HDR_BASE + 0x00)
-+#define TOE_DEFAULT_Q1_HDR_BASE		(TOE_NONTOE_QUE_HDR_BASE + 0x08)
-+#define TOE_CLASS_Q_HDR_BASE		(TOE_NONTOE_QUE_HDR_BASE + 0x10)
-+#define TOE_INTR_Q_HDR_BASE			(TOE_NONTOE_QUE_HDR_BASE + 0x80)
-+#define INTERRUPT_QUEUE_HDR_ADDR(n)	(TOE_INTR_Q_HDR_BASE + n * 8)
-+#define NONTOE_Q_HDR_AREA_END		(INTERRUPT_QUEUE_HDR_ADDR(TOE_INTR_QUEUE_MAX+1))
-+/**********************************************************************
-+ * TOE Queue Header Word 0
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int base_size;
-+} TOE_QHDR0_T;
-+
-+#define TOE_QHDR0_BASE_MASK 	(~0x0f)
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 1
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr1
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int wptr			: 16;	// bit 31:16
-+		unsigned int rptr			: 16;	// bit 15:0
-+#else
-+		unsigned int rptr			: 16;	// bit 15:0
-+		unsigned int wptr			: 16;	// bit 31:16
-+#endif
-+	} bits;
-+} TOE_QHDR1_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 2
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr2
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int usd			: 1;	// bit 31		0: if no data assembled yet
-+		unsigned int ctl			: 1;	// bit 30		1: have control flag bits (except ack)
-+		unsigned int osq			: 1;	// bit 29		1: out of sequence
-+		unsigned int sat			: 1;	// bit 28		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+		unsigned int ip_opt			: 1;	// bit 27		1: have IPV4 option or IPV6 Extension header
-+		unsigned int tcp_opt		: 1;	// bit 26		1: Have TCP option
-+		unsigned int abn			: 1;	// bit 25		1: Abnormal case Found
-+		unsigned int dack			: 1;	// bit 24		1: Duplicated ACK
-+		unsigned int reserved		: 7;	// bit 23:17
-+		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
-+#else
-+		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
-+		unsigned int reserved		: 7;	// bit 23:17
-+		unsigned int dack			: 1;	// bit 24		1: Duplicated ACK
-+		unsigned int abn			: 1;	// bit 25		1: Abnormal case Found
-+		unsigned int tcp_opt		: 1;	// bit 26		1: Have TCP option
-+		unsigned int ip_opt			: 1;	// bit 27		1: have IPV4 option or IPV6 Extension header
-+		unsigned int sat			: 1;	// bit 28		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+		unsigned int osq			: 1;	// bit 29		1: out of sequence
-+		unsigned int ctl			: 1;	// bit 30		1: have control flag bits (except ack)
-+		unsigned int usd			: 1;	// bit 31		0: if no data assembled yet
-+#endif
-+	} bits;
-+} TOE_QHDR2_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 3
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int seq_num;
-+} TOE_QHDR3_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 4
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int ack_num;
-+} TOE_QHDR4_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 5
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr5
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int SeqCnt		: 16;	// bit 31:16
-+		unsigned int AckCnt		: 16;	// bit 15:0
-+#else
-+		unsigned int AckCnt		: 16;	// bit 15:0
-+		unsigned int SeqCnt		: 16;	// bit 31:16
-+#endif
-+	} bits;
-+} TOE_QHDR5_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 6
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr6
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int MaxPktSize	: 14;	// bit 31:18
-+		unsigned int iq_num		: 2;	// bit 17:16
-+		unsigned int WinSize	: 16;	// bit 15:0
-+#else
-+		unsigned int WinSize	: 16;	// bit 15:0
-+		unsigned int iq_num		: 2;	// bit 17:16
-+		unsigned int MaxPktSize	: 14;	// bit 31:18
-+#endif
-+	} bits;
-+} TOE_QHDR6_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 7
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr7
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int SeqThreshold	: 16;	// bit 31:16
-+		unsigned int AckThreshold	: 16;	// bit 15:0
-+#else
-+		unsigned int AckThreshold	: 16;	// bit 15:0
-+		unsigned int SeqThreshold	: 16;	// bit 31:16
-+#endif
-+	} bits;
-+} TOE_QHDR7_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header
-+ **********************************************************************/
-+typedef struct
-+{
-+	TOE_QHDR0_T		word0;
-+	TOE_QHDR1_T		word1;
-+	TOE_QHDR2_T		word2;
-+	TOE_QHDR3_T		word3;
-+	TOE_QHDR4_T		word4;
-+	TOE_QHDR5_T		word5;
-+	TOE_QHDR6_T		word6;
-+	TOE_QHDR7_T		word7;
-+} TOE_QHDR_T;
-+
-+/**********************************************************************
-+ * NONTOE Queue Header Word 0
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int base_size;
-+} NONTOE_QHDR0_T;
-+
-+#define NONTOE_QHDR0_BASE_MASK 	(~0x0f)
-+
-+/**********************************************************************
-+ * NONTOE Queue Header Word 1
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_nonqhdr1
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int wptr			: 16;	// bit 31:16
-+		unsigned int rptr			: 16;	// bit 15:0
-+#else
-+		unsigned int rptr			: 16;	// bit 15:0
-+		unsigned int wptr			: 16;	// bit 31:16
-+#endif
-+	} bits;
-+} NONTOE_QHDR1_T;
-+
-+/**********************************************************************
-+ * Non-TOE Queue Header
-+ **********************************************************************/
-+typedef struct
-+{
-+	NONTOE_QHDR0_T		word0;
-+	NONTOE_QHDR1_T		word1;
-+} NONTOE_QHDR_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 0
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_intrqhdr0
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int wptr		: 16;	// bit 31:16	Write Pointer where hw stopped
-+		unsigned int win_size	: 16;	// bit 15:0 	Descriptor Ring Size
-+#else
-+		unsigned int win_size	: 16;	// bit 15:0 	Descriptor Ring Size
-+		unsigned int wptr		: 16;	// bit 31:16	Write Pointer where hw stopped
-+#endif
-+	} bits;
-+} INTR_QHDR0_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 1
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_intrqhdr1
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int ctl			: 1;	// bit 31		1: have control flag bits (except ack)
-+		unsigned int osq			: 1;	// bit 30		1: out of sequence
-+		unsigned int sat			: 1;	// bit 29		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+		unsigned int ip_opt			: 1;	// bit 28		1: have IPV4 option or IPV6 Extension header
-+		unsigned int tcp_opt		: 1;	// bit 27		1: Have TCP option
-+		unsigned int abn			: 1;	// bit 26		1: Abnormal case Found
-+		unsigned int dack			: 1;	// bit 25		1: Duplicated ACK
-+		unsigned int tcp_qid		: 8;	// bit 24:17	TCP Queue ID
-+		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
-+#else
-+		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
-+		unsigned int tcp_qid		: 8;	// bit 24:17	TCP Queue ID
-+		unsigned int dack			: 1;	// bit 25		1: Duplicated ACK
-+		unsigned int abn			: 1;	// bit 26		1: Abnormal case Found
-+		unsigned int tcp_opt		: 1;	// bit 27		1: Have TCP option
-+		unsigned int ip_opt			: 1;	// bit 28		1: have IPV4 option or IPV6 Extension header
-+		unsigned int sat			: 1;	// bit 29		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+		unsigned int osq			: 1;	// bit 30		1: out of sequence
-+		unsigned int ctl			: 1;	// bit 31		1: have control flag bits (except ack)
-+#endif
-+	} bits;
-+} INTR_QHDR1_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 2
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int seq_num;
-+} INTR_QHDR2_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 3
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int ack_num;
-+} INTR_QHDR3_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 4
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_intrqhdr4
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int SeqCnt		: 16;	// bit 31:16	Seq# change since last seq# intr.
-+		unsigned int AckCnt		: 16;	// bit 15:0     Ack# change since last ack# intr.
-+#else
-+		unsigned int AckCnt		: 16;	// bit 15:0		Ack# change since last ack# intr.
-+		unsigned int SeqCnt		: 16;	// bit 31:16	Seq# change since last seq# intr.
-+#endif
-+	} bits;
-+} INTR_QHDR4_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header
-+ **********************************************************************/
-+typedef struct
-+{
-+	INTR_QHDR0_T		word0;
-+	INTR_QHDR1_T		word1;
-+	INTR_QHDR2_T		word2;
-+	INTR_QHDR3_T		word3;
-+	INTR_QHDR4_T		word4;
-+	unsigned int		word5;
-+	unsigned int		word6;
-+	unsigned int		word7;
-+} INTR_QHDR_T;
-+
-+/**********************************************************************
-+ * GMAC Conf
-+ **********************************************************************/
-+typedef struct gmac_conf {
-+	struct net_device *dev;
-+	int portmap;
-+	int vid;
-+	int flag;     /* 1: active  0: non-active */
-+} sys_gmac_conf;
-+
-+/**********************************************************************
-+ * GMAC private data
-+ **********************************************************************/
-+typedef struct {
-+	unsigned int		rwptr_reg;
-+	unsigned int		desc_base;
-+	unsigned int		total_desc_num;
-+	unsigned short		finished_idx;
-+	GMAC_TXDESC_T		*curr_tx_desc;
-+	GMAC_TXDESC_T		*curr_finished_desc;
-+	struct sk_buff		*tx_skb[TX_DESC_NUM];
-+	unsigned long		total_sent;
-+	unsigned long		total_finished;
-+	unsigned long		intr_cnt;
-+} GMAC_SWTXQ_T;
-+
-+typedef struct {
-+	unsigned int		desc_base;
-+	unsigned long 		eof_cnt;
-+} GMAC_HWTXQ_T;
-+
-+typedef struct gmac_private{
-+	struct net_device	*dev;
-+	unsigned int		existed;
-+	unsigned int		port_id;	// 0 or 1
-+	unsigned int		base_addr;
-+	unsigned int		dma_base_addr;
-+	unsigned char		*mac_addr1;
-+	unsigned char		*mac_addr2;
-+	unsigned int		swtxq_desc_base;
-+	unsigned int		hwtxq_desc_base;
-+	GMAC_SWTXQ_T		swtxq[TOE_SW_TXQ_NUM];
-+	GMAC_HWTXQ_T		hwtxq[TOE_HW_TXQ_NUM];
-+	NONTOE_QHDR_T		*default_qhdr;
-+	unsigned int		default_desc_base;
-+	unsigned int		default_desc_num;
-+	unsigned int		rx_curr_desc;
-+	DMA_RWPTR_T			rx_rwptr;
-+	struct sk_buff		*curr_rx_skb;
-+	dma_addr_t			default_desc_base_dma;
-+	dma_addr_t			swtxq_desc_base_dma;
-+	dma_addr_t			hwtxq_desc_base_dma;
-+	unsigned int		irq;
-+	unsigned int		flow_control_enable	;
-+	unsigned int		pre_phy_status;
-+	unsigned int		full_duplex_cfg;
-+	unsigned int		speed_cfg;
-+	unsigned int		auto_nego_cfg;
-+	unsigned int		full_duplex_status;
-+	unsigned int		speed_status;
-+	unsigned int		phy_mode;	/* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
-+	unsigned int		phy_addr;
-+	unsigned int		intr0_enabled;	// 1: enabled
-+	unsigned int		intr1_enabled;	// 1: enabled
-+	unsigned int		intr2_enabled;	// 1: enabled
-+	unsigned int		intr3_enabled;	// 1: enabled
-+	unsigned int		intr4_enabled;	// 1: enabled
-+//	unsigned int		intr4_enabled_1;	// 1: enabled
-+	unsigned int		intr0_selected;	// 1: selected
-+	unsigned int		intr1_selected;	// 1: selected
-+	unsigned int		intr2_selected;	// 1: selected
-+	unsigned int		intr3_selected;	// 1: selected
-+	unsigned int		intr4_selected;	// 1: selected
-+	// void 				(*gmac_rcv_handler)(struct sk_buff *, int);
-+	struct net_device_stats ifStatics;
-+	unsigned long		txDerr_cnt[GMAC_NUM];
-+	unsigned long		txPerr_cnt[GMAC_NUM];
-+	unsigned long		RxDerr_cnt[GMAC_NUM];
-+	unsigned long		RxPerr_cnt[GMAC_NUM];
-+	unsigned int		isr_rx_cnt;
-+	unsigned int		isr_tx_cnt;
-+	unsigned long		rx_discard;
-+	unsigned long		rx_error;
-+	unsigned long		rx_mcast;
-+	unsigned long		rx_bcast;
-+	unsigned long		rx_status_cnt[8];
-+	unsigned long		rx_chksum_cnt[8];
-+	unsigned long		rx_sta1_ucast;	// for STA 1 MAC Address
-+	unsigned long		rx_sta2_ucast;	// for STA 2 MAC Address
-+	unsigned long		mib_full_cnt;
-+	unsigned long		rx_pause_on_cnt;
-+	unsigned long		tx_pause_on_cnt;
-+	unsigned long		rx_pause_off_cnt;
-+	unsigned long		tx_pause_off_cnt;
-+	unsigned long		rx_overrun_cnt;
-+	unsigned long		status_changed_cnt;
-+	unsigned long		default_q_cnt;
-+	unsigned long		hw_fq_empty_cnt;
-+	unsigned long		sw_fq_empty_cnt;
-+	unsigned long		default_q_intr_cnt;
-+	pid_t               thr_pid;
-+	wait_queue_head_t   thr_wait;
-+	struct completion   thr_exited;
-+    spinlock_t          lock;
-+    int                 time_to_die;
-+    int					operation;
-+#ifdef SL351x_GMAC_WORKAROUND
-+    unsigned long		short_frames_cnt;
-+#endif
-+}GMAC_INFO_T ;
-+
-+typedef struct toe_private {
-+	unsigned int	swfq_desc_base;
-+	unsigned int	hwfq_desc_base;
-+	unsigned int	hwfq_buf_base;
-+//	unsigned int	toe_desc_base[TOE_TOE_QUEUE_NUM];
-+//	unsigned int	toe_desc_num;
-+//	unsigned int	class_desc_base;
-+//	unsigned int	class_desc_num;
-+//	unsigned int	intr_desc_base;
-+//	unsigned int	intr_desc_num;
-+//	unsigned int	intr_buf_base;
-+	DMA_RWPTR_T		fq_rx_rwptr;
-+	GMAC_INFO_T		gmac[GMAC_NUM];
-+	dma_addr_t		sw_freeq_desc_base_dma;
-+	dma_addr_t		hw_freeq_desc_base_dma;
-+	dma_addr_t		hwfq_buf_base_dma;
-+	dma_addr_t		hwfq_buf_end_dma;
-+//	dma_addr_t		toe_desc_base_dma[TOE_TOE_QUEUE_NUM];
-+//	dma_addr_t		class_desc_base_dma;
-+//	dma_addr_t		intr_desc_base_dma;
-+//	dma_addr_t		intr_buf_base_dma;
-+//	unsigned long	toe_iq_intr_full_cnt[TOE_INTR_QUEUE_NUM];
-+//	unsigned long	toe_iq_intr_cnt[TOE_INTR_QUEUE_NUM];
-+//	unsigned long	toe_q_intr_full_cnt[TOE_TOE_QUEUE_NUM];
-+//	unsigned long	class_q_intr_full_cnt[TOE_CLASS_QUEUE_NUM];
-+//	unsigned long	class_q_intr_cnt[TOE_CLASS_QUEUE_NUM];
-+} TOE_INFO_T;
-+
-+extern TOE_INFO_T toe_private_data;
-+
-+#define GMAC_PORT0	0
-+#define GMAC_PORT1	1
-+/**********************************************************************
-+ * PHY Definition
-+ **********************************************************************/
-+#define HPHY_ADDR   			0x01
-+#define GPHY_ADDR   			0x02
-+
-+enum phy_state
-+{
-+    LINK_DOWN   = 0,
-+    LINK_UP     = 1
-+};
-+
-+/* transmit timeout value */
-+
-+#endif //_GMAC_SL351x_H
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_hash_cfg.h
-@@ -0,0 +1,365 @@
-+/*-----------------------------------------------------------------------------------
-+*	sl351x_hash_cfg.h
-+*
-+*	Description:
-+*	
-+*	History:
-+*
-+*	9/14/2005	Gary Chen	Create
-+*
-+*-------------------------------------------------------------------------------------*/
-+#ifndef _SL351x_HASH_CFG_H_
-+#define _SL351x_HASH_CFG_H_	1
-+
-+// #define NAT_DEBUG_MSG	1
-+// #define DEBUG_NAT_MIXED_HW_SW_TX	1
-+#ifdef DEBUG_NAT_MIXED_HW_SW_TX
-+	// #define NAT_DEBUG_LAN_HASH_TIMEOUT	1
-+	// #define NAT_DEBUG_WAN_HASH_TIMEOUT	1
-+#endif
-+
-+#define IPIV(a,b,c,d)		((a<<24)+(b<<16)+(c<<8)+d)
-+#define	IPIV1(a)			((a>>24)&0xff)
-+#define	IPIV2(a)			((a>>16)&0xff)
-+#define IPIV3(a)			((a>>8)&0xff)
-+#define IPIV4(a)			((a)&0xff)
-+
-+#define HASH_MAX_BYTES			64	// 128
-+#define HASH_ACTION_DWORDS		9
-+#define HASH_MAX_DWORDS			(HASH_MAX_BYTES / sizeof(u32))
-+#define HASH_MAX_KEY_DWORD		(HASH_MAX_DWORDS - HASH_ACTION_DWORDS)
-+#define HASH_INIT_KEY			0x534C4F52
-+#define HASH_BITS				12	// 12 : Normal, 7: Simulation
-+#define HASH_TOTAL_ENTRIES		(1 << HASH_BITS)
-+#define HASH_MAX_ENTRIES		(1 << 12)
-+#define HASH_TOE_ENTRIES		(HASH_TOTAL_ENTRIES >> 5)
-+#define HASH_BITS_MASK			((1 << HASH_BITS) - 1)
-+
-+#define hash_lock(lock)			// spin_lock_bh(lock)
-+#define hash_unlock(lock)		// spin_unlock_bh(lock)
-+
-+/*----------------------------------------------------------------------
-+ *  special macro
-+ ----------------------------------------------------------------------*/
-+#define HASH_PUSH_WORD(cp, data)	{*cp++ = (((u16)(data))     ) & 0xff; 	\
-+							 		*cp++ = (((u16)(data)) >> 8) & 0xff;} 
-+#define HASH_PUSH_DWORD(cp, data)	{*cp++ = (u8)(((u32)(data))      ) & 0xff;	\
-+							  		*cp++ = (u8)(((u32)(data)) >>  8) & 0xff;	\
-+							  		*cp++ = (u8)(((u32)(data)) >> 16) & 0xff;	\
-+							  		*cp++ = (u8)(((u32)(data)) >> 24) & 0xff;}
-+#define HASH_PUSH_BYTE(cp, data)	{*cp++ = ((u8)(data)) & 0xff;}
-+
-+/*----------------------------------------------------------------------
-+ *  key
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u8		port;
-+	u16		Ethertype;
-+	u8		da[6];
-+	u8		sa[6];
-+	u16		pppoe_sid;	
-+	u16		vlan_id;	
-+	u8		ipv4_hdrlen;	
-+	u8		ip_tos;	
-+	u8		ip_protocol;	
-+	u32		ipv6_flow_label;
-+	u8		sip[16];
-+	u8		dip[16];
-+	//__u32			sip[4];
-+	//__u32			dip[4];
-+	u8		l4_bytes[24];
-+	u8		l7_bytes[24];
-+	u8		ipv6;	// 1: IPv6, 0: IPV4
-+} ENTRY_KEY_T;
-+
-+/*----------------------------------------------------------------------
-+ *  key for NAT
-+ *	Note: packed
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u16		Ethertype;		// not used
-+	u8		port_id;
-+	u8		rule_id;
-+	u8		ip_protocol;
-+	u8		reserved1;		// ip_tos, not used
-+	u16		reserved2;		// not used
-+	u32		sip;
-+	u32		dip;
-+	u16		sport;
-+	u16		dport;
-+} NAT_KEY_T;
-+
-+#define NAT_KEY_DWORD_SIZE	(sizeof(NAT_KEY_T)/sizeof(u32))
-+#define NAT_KEY_SIZE		(sizeof(NAT_KEY_T))
-+
-+/*----------------------------------------------------------------------
-+ *  key for NAT
-+ *	Note: packed
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u16		Ethertype;		// not used
-+	u8		port_id;
-+	u8		rule_id;
-+	u8		ip_protocol;
-+	u8		reserved1;		// ip_tos, not used
-+	u16		reserved2;		// not used
-+	u32		sip;
-+	u32		dip;
-+	u16		reserved3;
-+	u16		protocol;
-+	u16		reserved4;
-+	u16		call_id;
-+} GRE_KEY_T;
-+
-+#define GRE_KEY_DWORD_SIZE	(sizeof(GRE_KEY_T)/sizeof(u32))
-+#define GRE_KEY_SIZE		(sizeof(GRE_KEY_T))
-+/*----------------------------------------------------------------------
-+ *  key present or not
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u32		port			: 1;
-+	u32		Ethertype		: 1;
-+	u32		da				: 1;
-+	u32		sa				: 1;
-+	u32		pppoe_sid		: 1;	
-+	u32		vlan_id			: 1;	
-+	u32		ipv4_hdrlen		: 1;	
-+	u32		ip_tos			: 1;
-+	u32		ip_protocol		: 1;	
-+	u32		ipv6_flow_label	: 1;
-+	u32		sip				: 1;
-+	u32		dip				: 1;
-+	u32		l4_bytes_0_3	: 1;
-+	u32		l4_bytes_4_7	: 1;
-+	u32		l4_bytes_8_11	: 1;
-+	u32		l4_bytes_12_15	: 1;
-+	u32		l4_bytes_16_19	: 1;
-+	u32		l4_bytes_20_23	: 1;
-+	u32		l7_bytes_0_3	: 1;
-+	u32		l7_bytes_4_7	: 1;
-+	u32		l7_bytes_8_11	: 1;
-+	u32		l7_bytes_12_15	: 1;
-+	u32		l7_bytes_16_19	: 1;
-+	u32		l7_bytes_20_23	: 1;
-+	u32		reserved		: 8;
-+} KEY_FIELD_T;
-+
-+/*----------------------------------------------------------------------
-+ *  action
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u32		reserved0	: 5;	// bit 0:4
-+	u32		pppoe		: 2;	// bit 5:6
-+	u32		vlan		: 2;	// bit 7:8
-+	u32		sa			: 1;	// bit 9
-+	u32		da			: 1;	// bit 10
-+	u32		Dport		: 1;	// bit 11
-+	u32		Sport		: 1;	// bit 12
-+	u32		Dip			: 1;	// bit 13
-+	u32		Sip			: 1;	// bit 14
-+	u32		sw_id		: 1;	// bit 15
-+	u32		frag		: 1;	// bit 16
-+	u32		option		: 1;	// bit 17
-+	u32		ttl_0		: 1;	// bit 18
-+	u32		ttl_1		: 1;	// bit 19
-+	u32		mtu			: 1;	// bit 20
-+	u32		exception	: 1;	// bit 21
-+	u32		srce_qid	: 1;	// bit 22
-+	u32		discard		: 1;	// bit 23
-+	u32		dest_qid	: 8;	// bit 24:31
-+} ENTRY_ACTION_T;
-+
-+#define ACTION_DISCARD_BIT		BIT(23)
-+#define ACTION_SRCE_QID_BIT		BIT(22)
-+#define ACTION_EXCEPTION_BIT	BIT(21)
-+#define ACTION_MTU_BIT			BIT(20)
-+#define ACTION_TTL_1_BIT		BIT(19)
-+#define ACTION_TTL_0_BIT		BIT(18)
-+#define ACTION_IP_OPTION		BIT(17)
-+#define ACTION_FRAG_BIT			BIT(16)
-+#define ACTION_SWID_BIT			BIT(15)
-+#define ACTION_SIP_BIT			BIT(14)
-+#define ACTION_DIP_BIT			BIT(13)
-+#define ACTION_SPORT_BIT		BIT(12)
-+#define ACTION_DPORT_BIT		BIT(11)
-+#define ACTION_DA_BIT			BIT(10)
-+#define ACTION_SA_BIT			BIT(9)
-+#define ACTION_VLAN_DEL_BIT		BIT(8)
-+#define ACTION_VLAN_INS_BIT		BIT(7)
-+#define ACTION_PPPOE_DEL_BIT	BIT(6)
-+#define ACTION_PPPOE_INS_BIT	BIT(5)
-+#define ACTION_L4_THIRD_BIT		BIT(4)
-+#define ACTION_L4_FOURTH_BIT	BIT(3)
-+
-+#define NAT_ACTION_BITS			(ACTION_SRCE_QID_BIT  | ACTION_EXCEPTION_BIT |	\
-+								ACTION_TTL_1_BIT | ACTION_TTL_0_BIT | 			\
-+								ACTION_IP_OPTION | ACTION_FRAG_BIT |			\
-+								ACTION_DA_BIT | ACTION_SA_BIT)
-+#define NAT_LAN2WAN_ACTIONS		(NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_SPORT_BIT)
-+#define NAT_WAN2LAN_ACTIONS		(NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_DPORT_BIT)
-+#define NAT_PPPOE_LAN2WAN_ACTIONS	(NAT_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
-+#define NAT_PPPOE_WAN2LAN_ACTIONS	(NAT_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
-+#define NAT_PPTP_LAN2WAN_ACTIONS	(NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_L4_FOURTH_BIT)
-+#define NAT_PPTP_WAN2LAN_ACTIONS	(NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_L4_FOURTH_BIT)
-+#define NAT_PPPOE_PPTP_LAN2WAN_ACTIONS	(NAT_PPTP_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
-+#define NAT_PPPOE_PPTP_WAN2LAN_ACTIONS	(NAT_PPTP_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
-+								
-+/*----------------------------------------------------------------------
-+ *  parameter
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u8		da[6];
-+	u8		sa[6];
-+	u16		vlan;	
-+	u16  	pppoe;	
-+	u32		Sip;
-+	u32		Dip;
-+	u16  	Sport;	
-+	u16  	Dport;	
-+	u16  	sw_id;	
-+	u16  	mtu;	
-+} ENTRY_PARAM_T;
-+
-+/*----------------------------------------------------------------------
-+ *  Hash Entry
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	char			rule;
-+	ENTRY_KEY_T		key;
-+	KEY_FIELD_T		key_present;
-+	ENTRY_ACTION_T	action;
-+	ENTRY_PARAM_T	param;
-+	int				index;
-+	int				total_dwords;
-+} HASH_ENTRY_T;
-+
-+/*----------------------------------------------------------------------
-+ *  NAT Hash Entry
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	short	counter;
-+	short	interval;
-+} HASH_TIMEOUT_T;
-+
-+/*----------------------------------------------------------------------
-+ *  NAT Hash Entry for TCP/UDP protocol
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	NAT_KEY_T			key;
-+	union {
-+		u32				dword;
-+		ENTRY_ACTION_T	bits;
-+	} action;
-+	ENTRY_PARAM_T		param;
-+	HASH_TIMEOUT_T		tmo;	// used by software only, to use memory space efficiently
-+} NAT_HASH_ENTRY_T;
-+
-+#define NAT_HASH_ENTRY_SIZE		(sizeof(NAT_HASH_ENTRY_T))
-+
-+/*----------------------------------------------------------------------
-+ *  GRE Hash Entry for PPTP/GRE protocol
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	GRE_KEY_T			key;
-+	union {
-+		u32				dword;
-+		ENTRY_ACTION_T	bits;
-+	} action;
-+	ENTRY_PARAM_T		param;
-+	HASH_TIMEOUT_T		tmo;	// used by software only, to use memory space efficiently
-+} GRE_HASH_ENTRY_T;
-+
-+#define GRE_HASH_ENTRY_SIZE		(sizeof(GRE_HASH_ENTRY_T))
-+
-+/*----------------------------------------------------------------------
-+ *  External Variables
-+ ----------------------------------------------------------------------*/
-+extern char				hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
-+extern u32				hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
-+/*----------------------------------------------------------------------
-+* hash_get_valid_flag
-+*----------------------------------------------------------------------*/
-+static inline int hash_get_valid_flag(int index)
-+{
-+	volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+	if (index >= (0x80 * 8) && index < (0x8c * 8))
-+		return 1;
-+#endif	
-+	return (hash_valid_bits_ptr[index/32] & (1 << (index %32)));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_get_nat_owner_flag
-+*----------------------------------------------------------------------*/
-+static inline int hash_get_nat_owner_flag(int index)
-+{
-+	return (hash_nat_owner_bits[index/32] & (1 << (index %32)));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_validate_entry
-+*----------------------------------------------------------------------*/
-+static inline void hash_validate_entry(int index)
-+{
-+	volatile u32	*hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
-+	register int	ptr = index/32, bits = 1 << (index %32);
-+	
-+	hash_valid_bits_ptr[ptr] |= bits;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_invalidate_entry
-+*----------------------------------------------------------------------*/
-+static inline void hash_invalidate_entry(int index)
-+{
-+	volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
-+	register int	ptr = index/32, bits = 1 << (index %32);
-+	
-+	hash_valid_bits_ptr[ptr] &= ~(bits);
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_nat_enable_owner
-+*----------------------------------------------------------------------*/
-+static inline void hash_nat_enable_owner(int index)
-+{
-+	hash_nat_owner_bits[index/32] |= (1 << (index % 32));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_nat_disable_owner
-+*----------------------------------------------------------------------*/
-+static inline void hash_nat_disable_owner(int index)
-+{
-+	hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_get_entry
-+*----------------------------------------------------------------------*/
-+static inline void *hash_get_entry(int index)
-+{
-+	return (void*) &hash_tables[index][0];
-+}
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+extern int hash_add_entry(HASH_ENTRY_T *entry);
-+extern void sl351x_hash_init(void);
-+extern void hash_set_valid_flag(int index, int valid);
-+extern void hash_set_nat_owner_flag(int index, int valid);
-+extern void *hash_get_entry(int index);
-+extern int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry);
-+extern void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry);
-+extern int hash_write_entry(HASH_ENTRY_T *entry, u8 *key);
-+extern int hash_add_entry(HASH_ENTRY_T *entry);
-+extern	u16 hash_crc16(u16 crc, u8 *datap, u32 len);
-+extern	u16 hash_gen_crc16(u8 *datap, u32 len);
-+
-+#endif // _SL351x_HASH_CFG_H_
-+
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_nat_cfg.h
-@@ -0,0 +1,211 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.                
-+*--------------------------------------------------------------------------
-+*	sl_nat_cfg.h
-+*
-+*	Description:
-+*		- Define the Device Control Commands for NAT Configuration
-+*	
-+*	History:
-+*
-+*	4/28/2006	Gary Chen	Create
-+*
-+*-----------------------------------------------------------------------------*/
-+#ifndef _SL351x_NAT_CFG_H_
-+#define _SL351x_NAT_CFG_H_	1
-+
-+/*----------------------------------------------------------------------
-+* Confiuration
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_NETFILTER
-+#define CONFIG_SL351x_NAT			1
-+#undef CONFIG_SL351x_NAT
-+#undef CONFIG_SL351x_SYSCTL
-+#endif
-+#define CONFIG_NAT_MAX_IP_NUM		4	// per device (eth0 or eth1)
-+#define CONFIG_NAT_MAX_XPORT		64
-+#define CONFIG_NAT_MAX_WRULE		16	// per Queue
-+#define CONFIG_NAT_TXQ_NUM			4
-+/*----------------------------------------------------------------------
-+* Command set
-+*----------------------------------------------------------------------*/
-+#define SIOCDEVSL351x	SIOCDEVPRIVATE	// 0x89F0
-+#define NATSSTATUS		0
-+#define NATGSTATUS		1
-+#define NATSETPORT		2
-+#define NATGETPORT		3
-+#define NATADDIP		4
-+#define NATDELIP		5
-+#define NATGETIP		6
-+#define NATAXPORT		7
-+#define NATDXPORT		8
-+#define NATGXPORT		9
-+#define NATSWEIGHT		10
-+#define NATGWEIGHT		11
-+#define NATAWRULE		12
-+#define NATDWRULE		13
-+#define NATGWRULE		14
-+#define NATSDEFQ		15
-+#define NATGDEFQ		16
-+#define NATRMIPCFG		17		// remove IP config
-+#define NATTESTENTRY	18
-+#define NATSETMEM		19
-+#define NATSHOWMEM		20
-+/*----------------------------------------------------------------------
-+* Command Structure
-+*----------------------------------------------------------------------*/
-+// Common Header
-+typedef struct {
-+	unsigned short		cmd;	// command ID
-+	unsigned short		len;	// data length, excluding this header
-+} NATCMD_HDR_T;
-+
-+// NATSSTATUS & NATGSTATUS commands
-+typedef struct {
-+	unsigned char		enable;
-+} NAT_STATUS_T;	
-+
-+// NATSETPORT & NATGETPORT commands
-+typedef struct {
-+	unsigned char		portmap;
-+} NAT_PORTCFG_T;
-+
-+typedef struct {
-+	unsigned int		ipaddr;
-+	unsigned int		netmask;
-+} NAT_IP_ENTRY_T;
-+
-+// NATADDIP & NATDELIP commands
-+typedef struct {
-+	NAT_IP_ENTRY_T	entry;
-+} NAT_IPCFG_T;
-+
-+// NATGETIP command
-+typedef struct {
-+	unsigned int	total;
-+	NAT_IP_ENTRY_T	entry[CONFIG_NAT_MAX_IP_NUM];
-+} NAT_IPCFG_ALL_T;
-+
-+typedef struct {
-+	unsigned int		protocol;
-+	unsigned short		sport_start;
-+	unsigned short		sport_end;
-+	unsigned short		dport_start;
-+	unsigned short		dport_end;
-+} NAT_XPORT_ENTRY_T;
-+
-+// NATAXPORT & NATDXPORT Commands
-+typedef struct {
-+	NAT_XPORT_ENTRY_T	entry;
-+} NAT_XPORT_T;
-+
-+// NATGXPORT Command
-+typedef struct {
-+	unsigned int		total;
-+	NAT_XPORT_ENTRY_T	entry[CONFIG_NAT_MAX_XPORT];
-+} NAT_XPORT_ALL_T;
-+
-+// NATSWEIGHT & NATGWEIGHT Commands
-+typedef struct {
-+	unsigned char		weight[CONFIG_NAT_TXQ_NUM];
-+} NAT_WEIGHT_T;
-+
-+typedef struct {
-+	unsigned int		protocol;
-+	unsigned int		sip_start;
-+	unsigned int		sip_end;
-+	unsigned int		dip_start;
-+	unsigned int		dip_end;
-+	unsigned short		sport_start;
-+	unsigned short		sport_end;
-+	unsigned short		dport_start;
-+	unsigned short		dport_end;
-+} NAT_WRULE_ENTRY_T;	
-+
-+// NATAWRULE & NATDWRULE Commands
-+typedef struct {
-+	unsigned int		qid;
-+	NAT_WRULE_ENTRY_T	entry;
-+} NAT_WRULE_T;
-+
-+// NATGWRULE Command
-+typedef struct {
-+	unsigned int		total;
-+	NAT_WRULE_ENTRY_T	entry[CONFIG_NAT_MAX_WRULE];
-+} NAT_WRULE_ALL_T;
-+
-+// NATSDEFQ & NATGDEFQ commands
-+typedef struct {
-+	unsigned int		qid;
-+} NAT_QUEUE_T;	
-+
-+// NATTESTENTRY 
-+typedef struct {
-+	u_int16_t		cmd;	// command ID
-+	u_int16_t		len;	// data length, excluding this header
-+	u_int8_t		init_enable;
-+} NAT_TESTENTRY_T;	
-+	
-+typedef union
-+{
-+	NAT_STATUS_T		status;
-+	NAT_PORTCFG_T		portcfg;
-+	NAT_IPCFG_T			ipcfg;
-+	NAT_XPORT_T			xport;
-+	NAT_WEIGHT_T		weight;
-+	NAT_WRULE_T			wrule;
-+	NAT_QUEUE_T			queue;
-+	NAT_TESTENTRY_T init_entry;
-+} NAT_REQ_E;
-+	
-+/*----------------------------------------------------------------------
-+* NAT Configuration
-+*	- Used by driver only
-+*----------------------------------------------------------------------*/
-+typedef struct {
-+	unsigned int		enabled;
-+	unsigned int		init_enabled;
-+	unsigned int		tcp_udp_rule_id;
-+	unsigned int		gre_rule_id;
-+	unsigned int		lan_port;
-+	unsigned int		wan_port;
-+	unsigned int		default_hw_txq;
-+	short				tcp_tmo_interval;
-+	short				udp_tmo_interval;
-+	short				gre_tmo_interval;
-+	NAT_IPCFG_ALL_T		ipcfg[2];	// LAN/WAN port
-+	NAT_XPORT_ALL_T		xport;
-+	NAT_WEIGHT_T		weight;
-+	NAT_WRULE_ALL_T		wrule[CONFIG_NAT_TXQ_NUM];
-+} NAT_CFG_T;
-+
-+/*----------------------------------------------------------------------
-+* NAT Control Block
-+*	- Used by driver only
-+*	- Stores LAN-IN or WAN-IN information
-+*	- WAN-OUT and LAN-OUT driver use them to build up a hash entry
-+*	- NOTES: To update this data structure, MUST take care of alignment issue
-+*   -		 MUST make sure that the size of skbuff structure must 
-+*            be larger than (40 + sizof(NAT_CB_T))
-+*----------------------------------------------------------------------*/
-+typedef struct {
-+	unsigned short		tag;
-+	unsigned char		sa[6];
-+	unsigned int		sip;
-+	unsigned int		dip;
-+	unsigned short		sport;
-+	unsigned short		dport;
-+	unsigned char		pppoe_frame;
-+	unsigned char		state;			// same to enum tcp_conntrack
-+	unsigned char		reserved[2];
-+} NAT_CB_T;
-+
-+#define NAT_CB_TAG		0x4C53	// "SL"
-+#define NAT_CB_SIZE		sizeof(NAT_CB_T)
-+// #define NAT_SKB_CB(skb)	(NAT_CB_T *)(((unsigned int)&((skb)->cb[40]) + 3) & ~3)  // for align 4
-+#define NAT_SKB_CB(skb)	(NAT_CB_T *)&((skb)->cb[40])  // for align 4
-+
-+#endif // _SL351x_NAT_CFG_H_
-+
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_toe.h
-@@ -0,0 +1,88 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl351x_toe.h
-+* Description	:
-+*		Define for TOE driver of Storlink SL351x
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*				Xiaochong	Create
-+*
-+****************************************************************************/
-+#ifndef __SL351x_TOE_H
-+#define __SL351x_TOE_H	1
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+/*
-+ * TOE_CONN_T is data structure of tcp connection info, used at both
-+ * device layer and kernel tcp layer
-+ * skb is the jumbo frame
-+ */
-+
-+struct toe_conn{
-+	__u8	qid;		// connection qid 0~63.
-+	__u8	ip_ver;		// 0: not used; 4: ipv4; 6: ipv6.
-+	/* hash key of the connection */
-+	__u16	source;
-+	__u16	dest;
-+	__u32	saddr[4];
-+	__u32	daddr[4];
-+
-+	__u32	seq;
-+	__u32	ack_seq;
-+
-+	/* these fields are used to set TOE QHDR */
-+	__u32	ack_threshold;
-+	__u32	seq_threshold;
-+	__u16	max_pktsize;
-+
-+	/* used by sw toe, accumulated ack_seq of ack frames */
-+	__u16	ack_cnt;
-+	/* used by sw toe, accumulated data frames held at driver */
-+	__u16	cur_pktsize;
-+
-+	__u8	status;
-+#define	TCP_CONN_UNDEFINE		0X00
-+#define	TCP_CONN_CREATION		0X01
-+#define	TCP_CONN_CONNECTING		0X02
-+#define	TCP_CONN_ESTABLISHED	0X04
-+#define	TCP_CONN_RESET			0X08	// this is used for out-of-order
-+                      			    	// or congestion window is small
-+#define	TCP_CONN_CLOSING		0X10
-+#define	TCP_CONN_CLOSED			0x11
-+
-+	__u16	hash_entry_index;	/* associated hash entry */
-+
-+	// one timer per connection. Otherwise all connections should be scanned
-+	// in a timeout interrupt, and timeout interrupt is triggered no matter
-+	// a connection is actually timeout or not.
-+	struct timer_list	rx_timer;
-+	unsigned long		last_rx_jiffies;
-+	GMAC_INFO_T			*gmac;
-+	struct net_device	*dev;
-+
-+	//	for generating pure ack frame.
-+	struct ethhdr		l2_hdr;
-+	struct iphdr		l3_hdr;
-+
-+	spinlock_t			conn_lock;
-+	DMA_RWPTR_T			toeq_rwptr;
-+	GMAC_RXDESC_T		*curr_desc;
-+	struct sk_buff		*curr_rx_skb;
-+};
-+
-+struct jumbo_frame {
-+	struct sk_buff	*skb0;		// the head of jumbo frame
-+	struct sk_buff	*tail;		// the tail of jumbo frame
-+	struct iphdr	*iphdr0;	// the ip hdr of skb0.
-+	struct tcphdr	*tcphdr0;	// the tcp hdr of skb0.
-+};
-+
-+#endif // __SL351x_TOE_H
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2131,6 +2131,42 @@ config ACENIC_OMIT_TIGON_I
- 
- 	  The safe and default value for this is N.
- 
-+config NET_GMAC
-+	tristate "Storlink Gigabit Ethernet support"
-+	depends on ARCH_SL2312
-+	help
-+	  This driver supports Storlink dual Gigabit Ethernet.
-+
-+config NET_SL2312
-+	tristate "Storlink Gigabit Ethernet support"
-+	depends on NET_GMAC
-+	help
-+	  This driver supports Storlink dual Gigabit Ethernet.
-+
-+config NET_SL351X
-+	tristate "Storlink Lepus Gigabit Ethernet support"
-+	depends on NET_GMAC
-+	help
-+	  This driver supports Storlink TOE and NAT dual Gigabit Ethernet.
-+
-+config SL2312_TSO
-+	bool "Tx Segmentation Enable"
-+	depends on NET_GMAC
-+	help
-+	  TBD
-+
-+config SL2312_MPAGE
-+	bool "Tx Multipage Enable"
-+	depends on NET_GMAC
-+	help
-+	  TBD
-+
-+config SL2312_RECVFILE
-+	bool "Rx Multipage Enable"
-+	depends on NET_GMAC
-+	help
-+	  TBD
-+
- config DL2K
- 	tristate "D-Link DL2000-based Gigabit Ethernet support"
- 	depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -236,4 +236,8 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o
- 
- obj-$(CONFIG_FS_ENET) += fs_enet/
- 
--obj-$(CONFIG_NETXEN_NIC) += netxen/
-+
-+obj-$(CONFIG_NET_SL351X)+= sl351x_gmac.o sl351x_nat.o sl351x_hash.o sl351x_crc16.o sl351x_proc.o sl_switch.o
-+obj-$(CONFIG_NET_SL2312)+= sl2312_emac.o
-+
-+
diff --git a/target/linux/storm/patches/003-gmac_one_phy.patch b/target/linux/storm/patches/003-gmac_one_phy.patch
deleted file mode 100644
index 15a69c905e..0000000000
--- a/target/linux/storm/patches/003-gmac_one_phy.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/include/asm-arm/arch-sl2312/sl351x_gmac.h
-+++ b/include/asm-arm/arch-sl2312/sl351x_gmac.h
-@@ -21,7 +21,7 @@
- #undef BIG_ENDIAN
- #define BIG_ENDIAN  				0
- #define GMAC_DEBUG      			1
--#define GMAC_NUM					2
-+#define GMAC_NUM					1
- //#define	L2_jumbo_frame				1
- 
- #define _PACKED_					__attribute__ ((aligned(1), packed))
diff --git a/target/linux/storm/patches/004-gmac_enable_napi.patch b/target/linux/storm/patches/004-gmac_enable_napi.patch
deleted file mode 100644
index dd87e88fcc..0000000000
--- a/target/linux/storm/patches/004-gmac_enable_napi.patch
+++ /dev/null
@@ -1,81 +0,0 @@
---- a/drivers/net/sl351x_gmac.c
-+++ b/drivers/net/sl351x_gmac.c
-@@ -68,9 +68,11 @@
- #include 
- #endif
- 
-+/* Enables NAPI unconditionally */
-+#define CONFIG_SL_NAPI					1
-+
- // #define SL351x_TEST_WORKAROUND
- #ifdef CONFIG_SL351x_NAT
--#define CONFIG_SL_NAPI					1
- #endif
- #define GMAX_TX_INTR_DISABLED			1
- #define DO_HW_CHKSUM					1
-@@ -124,12 +126,17 @@ static	char _debug_prefetch_buf[_DEBUG_P
-  *************************************************************/
- static int	gmac_initialized = 0;
- TOE_INFO_T toe_private_data;
--//static int		do_again = 0;
-+static int		do_again = 0;
- spinlock_t gmac_fq_lock;
- unsigned int FLAG_SWITCH;
- 
- static unsigned int     	next_tick = 3 * HZ;
--static unsigned char    	eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
-+static unsigned char    	eth_mac[CONFIG_MAC_NUM][6]= {
-+		{0x00,0x11,0x11,0x87,0x87,0x87},
-+#if GMAC_NUM != 1
-+		{0x00,0x22,0x22,0xab,0xab,0xab}
-+#endif
-+};
- 
- #undef CONFIG_SL351x_RXTOE
- extern NAT_CFG_T nat_cfg;
-@@ -2443,7 +2450,8 @@ static irqreturn_t toe_gmac_interrupt (i
- 	toe = (TOE_INFO_T *)&toe_private_data;
- //	handle NAPI
- #ifdef CONFIG_SL_NAPI
--if (storlink_ctl.pauseoff == 1)
-+	/* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
-+if (1)
- {
- /* disable GMAC interrupt */
-     //toe_gmac_disable_interrupt(tp->irq);
-@@ -2530,7 +2538,7 @@ if (storlink_ctl.pauseoff == 1)
- 				{
- 					if (likely(netif_rx_schedule_prep(dev)))
-         			{
--        				unsigned int data32;
-+        				// unsigned int data32;
-         				// disable GMAC-0 rx interrupt
-         				// class-Q & TOE-Q are implemented in future
-         				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-@@ -2563,7 +2571,7 @@ if (storlink_ctl.pauseoff == 1)
- 			{
- 				if (likely(netif_rx_schedule_prep(dev)))
-         		{
--        			unsigned int data32;
-+        			// unsigned int data32;
-          			// disable GMAC-0 rx interrupt
-         			// class-Q & TOE-Q are implemented in future
-         			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-@@ -4217,7 +4225,7 @@ static int gmac_rx_poll(struct net_devic
- 	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
- 	unsigned int		status4;
- 	volatile DMA_RWPTR_T	fq_rwptr;
--	int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
-+	// int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
- 	//unsigned long		rx_old_bytes;
- 	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
- 	//unsigned long long	rx_time;
-@@ -4479,7 +4487,7 @@ static int gmac_rx_poll(struct net_devic
- 
- 	if (rwptr.bits.rptr == rwptr.bits.wptr)
- 	{
--		unsigned int data32;
-+		// unsigned int data32;
- 			//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr]   rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
- 
- 	    /* Receive descriptor is empty now */
diff --git a/target/linux/storm/patches/005-gmac_napi_mask_intrs.patch b/target/linux/storm/patches/005-gmac_napi_mask_intrs.patch
deleted file mode 100644
index ba4caad203..0000000000
--- a/target/linux/storm/patches/005-gmac_napi_mask_intrs.patch
+++ /dev/null
@@ -1,248 +0,0 @@
---- a/drivers/net/sl351x_gmac.c
-+++ b/drivers/net/sl351x_gmac.c
-@@ -127,6 +127,7 @@ static	char _debug_prefetch_buf[_DEBUG_P
- static int	gmac_initialized = 0;
- TOE_INFO_T toe_private_data;
- static int		do_again = 0;
-+static int rx_poll_enabled;
- spinlock_t gmac_fq_lock;
- unsigned int FLAG_SWITCH;
- 
-@@ -1065,7 +1066,8 @@ static void toe_init_gmac(struct net_dev
- 	    tp->intr3_enabled = 	0xffffffff;
- 	    tp->intr4_selected = 	GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
- 	    						HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
--	    tp->intr4_enabled = 	GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
-+	    tp->intr4_enabled = 	GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT| GMAC0_RX_OVERRUN_INT_BIT;
-+	    // GMAC0_TX_PAUSE_OFF_INT_BIT| GMAC0_MIB_INT_BIT;
- 
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-@@ -1115,7 +1117,7 @@ static void toe_init_gmac(struct net_dev
- 	    	tp->intr3_enabled	|= 	0xffffffff;
- 	    	tp->intr4_selected 	|= 	CLASS_RX_FULL_INT_BITS |
- 	    							HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
--	    	tp->intr4_enabled	|= 	SWFQ_EMPTY_INT_BIT;
-+	    	tp->intr4_enabled	|= 	SWFQ_EMPTY_INT_BIT | GMAC1_RX_OVERRUN_INT_BIT;
- 		}
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-@@ -2408,7 +2410,7 @@ static inline void toe_gmac_fill_free_q(
- 	// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
- 
- 	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--	spin_lock_irqsave(&gmac_fq_lock, flags);
-+	// spin_lock_irqsave(&gmac_fq_lock, flags);
- 	//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
- 	//				TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
- 	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-@@ -2428,10 +2430,47 @@ static inline void toe_gmac_fill_free_q(
- 		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
- 		toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
- 	}
--	spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+	// spin_unlock_irqrestore(&gmac_fq_lock, flags);
- }
- // EXPORT_SYMBOL(toe_gmac_fill_free_q);
- 
-+static void gmac_registers(const char *message)
-+{
-+	unsigned int		status0;
-+	unsigned int		status1;
-+	unsigned int		status2;
-+	unsigned int		status3;
-+	unsigned int		status4;
-+
-+	printk("%s\n", message);
-+
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+	printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+		   status0, status1, status2, status3, status4);
-+
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+	printk("mask  : s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+		   status0, status1, status2, status3, status4);
-+
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
-+	printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+		   status0, status1, status2, status3, status4);
-+}
- /*----------------------------------------------------------------------
- * toe_gmac_interrupt
- *----------------------------------------------------------------------*/
-@@ -2492,6 +2531,7 @@ if (1)
- 		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
- 	if (status4)
- 		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
- #if 0
- 	/* handle freeq interrupt first */
- 	if (status4 & tp->intr4_enabled) {
-@@ -2536,10 +2576,31 @@ if (1)
- 			}
- 				if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
- 				{
--					if (likely(netif_rx_schedule_prep(dev)))
-+					if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
-         			{
--        				// unsigned int data32;
--        				// disable GMAC-0 rx interrupt
-+        				unsigned int data32;
-+
-+						if (rx_poll_enabled)
-+								gmac_registers("check #1");
-+
-+						BUG_ON(rx_poll_enabled == 1);
-+
-+#if 0
-+        				/* Masks GMAC-0 rx interrupt */
-+						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+						data32 &= ~(DEFAULT_Q0_INT_BIT);
-+						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+        				/* Masks GMAC-0 queue empty interrupt */
-+						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+						data32 &= ~DEFAULT_Q0_INT_BIT;
-+						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+						data32 &= ~DEFAULT_Q0_INT_BIT;
-+						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+#endif
-+
-         				// class-Q & TOE-Q are implemented in future
-         				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-         				//data32 &= ~DEFAULT_Q0_INT_BIT;
-@@ -2549,7 +2610,8 @@ if (1)
- 						//tp->total_q_cnt_napi=0;
- 						//rx_time = jiffies;
- 						//rx_old_bytes = isPtr->rx_bytes;
--            			__netif_rx_schedule(dev);
-+						__netif_rx_schedule(dev);
-+						rx_poll_enabled = 1;
-         			}
- 			}
- 		}
-@@ -2569,9 +2631,31 @@ if (1)
- 
- 			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
- 			{
--				if (likely(netif_rx_schedule_prep(dev)))
-+				if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
-         		{
--        			// unsigned int data32;
-+        			unsigned int data32;
-+
-+					if (rx_poll_enabled)
-+							gmac_registers("check #2");
-+
-+					BUG_ON(rx_poll_enabled == 1);
-+
-+#if 0
-+					/* Masks GMAC-1 rx interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					data32 &= ~(DEFAULT_Q1_INT_BIT);
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+        			/* Masks GMAC-1 queue empty interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+					data32 &= ~DEFAULT_Q1_INT_BIT;
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+					data32 &= ~DEFAULT_Q1_INT_BIT;
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+#endif
-+
-          			// disable GMAC-0 rx interrupt
-         			// class-Q & TOE-Q are implemented in future
-         			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-@@ -2583,9 +2667,13 @@ if (1)
- 					//rx_time = jiffies;
- 					//rx_old_bytes = isPtr->rx_bytes;
-            			__netif_rx_schedule(dev);
-+				rx_poll_enabled = 1;
-         		}
- 			}
- 		}
-+	} else {
-+
-+		gmac_registers("check #3");
- 	}
- 
- 	// Interrupt Status 0
-@@ -3306,8 +3394,10 @@ next_rx:
- 		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-      	tp->rx_rwptr.bits32 = rwptr.bits32;
- 
--		toe_gmac_fill_free_q();
- 	}
-+
-+	/* Handles first available packets only then refill the queue. */
-+	toe_gmac_fill_free_q();
- }
- 
- /*----------------------------------------------------------------------
-@@ -4217,6 +4307,7 @@ static int gmac_rx_poll(struct net_devic
-     GMAC_RXDESC_T   	*curr_desc;
- 	struct sk_buff 		*skb;
-     DMA_RWPTR_T			rwptr;
-+    unsigned int data32;
- 	unsigned int 		pkt_size;
- 	unsigned int        desc_count;
- 	unsigned int        good_frame, chksum_status, rx_status;
-@@ -4231,7 +4322,7 @@ static int gmac_rx_poll(struct net_devic
- 	//unsigned long long	rx_time;
- 
- 
--
-+	BUG_ON(rx_poll_enabled == 0);
- #if 1
- 	if (do_again)
- 	{
-@@ -4516,6 +4607,30 @@ static int gmac_rx_poll(struct net_devic
- #endif
-         //toe_gmac_fill_free_q();
-         netif_rx_complete(dev);
-+
-+		rx_poll_enabled = 0;
-+
-+		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+		if (tp->port_id == 0)
-+				data32 |= DEFAULT_Q0_INT_BIT;
-+		else
-+				data32 |= DEFAULT_Q1_INT_BIT;
-+		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+		if (tp->port_id == 0)
-+				data32 |= DEFAULT_Q0_INT_BIT;
-+		else
-+				data32 |= DEFAULT_Q1_INT_BIT;
-+		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+		if (tp->port_id == 0)
-+				data32 |= DEFAULT_Q0_INT_BIT;
-+		else
-+				data32 |= DEFAULT_Q1_INT_BIT;
-+		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
-         // enable GMAC-0 rx interrupt
-         // class-Q & TOE-Q are implemented in future
-         //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
diff --git a/target/linux/storm/patches/006-gmac_napi_tx.patch b/target/linux/storm/patches/006-gmac_napi_tx.patch
deleted file mode 100644
index 744109201e..0000000000
--- a/target/linux/storm/patches/006-gmac_napi_tx.patch
+++ /dev/null
@@ -1,2094 +0,0 @@
---- a/drivers/net/sl351x_gmac.c
-+++ b/drivers/net/sl351x_gmac.c
-@@ -43,9 +43,13 @@
- 
- #include 
- 
-+#define GET_RPTR(x) ((x) & 0xFFFF)
-+#define GET_WPTR(x) ((x) >> 16)
-+
- #define	 MIDWAY
- #define	 SL_LEPUS
--#define VITESSE_G5SWITCH	1
-+// #define VITESSE_G5SWITCH	1
-+#undef VITESSE_G5SWITCH
- 
- #ifndef CONFIG_SL351x_RXTOE
- //#define CONFIG_SL351x_RXTOE	1
-@@ -126,7 +130,6 @@ static	char _debug_prefetch_buf[_DEBUG_P
-  *************************************************************/
- static int	gmac_initialized = 0;
- TOE_INFO_T toe_private_data;
--static int		do_again = 0;
- static int rx_poll_enabled;
- spinlock_t gmac_fq_lock;
- unsigned int FLAG_SWITCH;
-@@ -190,7 +193,7 @@ void mac_get_sw_tx_weight(struct net_dev
- void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
- void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
- void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
--static inline void toe_gmac_fill_free_q(void);
-+static inline void toe_gmac_fill_free_q(int count);
- 
- #ifdef VITESSE_G5SWITCH
- extern int Get_Set_port_status(void);
-@@ -295,12 +298,14 @@ static int __init gmac_init_module(void)
- 	for(j = 0; idev = NULL;
-@@ -459,7 +464,7 @@ void mac_init_drv(void)
- 		toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
-         toe->gmac[0].auto_nego_cfg = 1;
-         toe->gmac[1].auto_nego_cfg = 1;
--#ifdef CONFIG_SL3516_ASIC
-+#ifndef CONFIG_SL3516_ASIC
-         toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
-         toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
- #else
-@@ -508,7 +513,7 @@ void mac_init_drv(void)
- 		// Write GLOBAL_QUEUE_THRESHOLD_REG
- 		threshold.bits32 = 0;
- 		threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
--		                                        TOE_SW_FREEQ_DESC_NUM/2;
-+		                                        TOE_SW_FREEQ_DESC_NUM/16;
- 		threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
- 		                                        TOE_HW_FREEQ_DESC_NUM/4;
- 		threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
-@@ -613,18 +618,25 @@ static void toe_init_free_queue(void)
- 	rwptr_reg.bits.rptr = 0;
- 	toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
- 	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	printk("SWFQ: %08X\n", readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG));
- 
- 	// SW Free Queue Descriptors
- 	for (i=0; iword0.bits.buffer_size = SW_RX_BUF_SIZE;
--		sw_desc_ptr->word1.bits.sw_id = i;	// used to locate skb
-+		sw_desc_ptr->word1.bits.sw_id = 0;	// used to locate skb
- 		if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
- 		{
- 			printk("%s::skb buffer allocation fail !\n",__func__); while(1);
- 		}
--		REG32(skb->data) = (unsigned int)skb;
-+
-+		data = skb->data;
- 		skb_reserve(skb, SKB_RESERVE_BYTES);
-+
-+		REG32(data + 0) = (unsigned int)skb;
-+		REG32(data + 4) = (unsigned short)i;
-+
- 		// toe->rx_skb[i] = skb;
- 		sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
- //   		consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
-@@ -851,14 +863,14 @@ static void toe_init_hwtx_queue(void)
- *----------------------------------------------------------------------*/
- static void toe_init_default_queue(void)
- {
--	TOE_INFO_T				*toe;
-+	TOE_INFO_T		*toe;
- 	volatile NONTOE_QHDR_T	*qhdr;
--	GMAC_RXDESC_T			*desc_ptr;
--	DMA_SKB_SIZE_T			skb_size;
-+	GMAC_RXDESC_T		*desc_ptr;
-+	DMA_SKB_SIZE_T		skb_size;
- 
- 	toe = (TOE_INFO_T *)&toe_private_data;
- 	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
--											(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
-+					       (dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
- 	if (!desc_ptr)
- 	{
- 		printk("%s::DMA_MALLOC fail !\n",__func__);
-@@ -866,14 +878,17 @@ static void toe_init_default_queue(void)
- 	}
- 	memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
- 	toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
-+	printk("toe->gmac[0].default_desc_base_dma: %08X\n", toe->gmac[0].default_desc_base_dma);
-+
- 	toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
- 	qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
- 	qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
- 	qhdr->word1.bits32 = 0;
- 	toe->gmac[0].rx_rwptr.bits32 = 0;
- 	toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
-+
- 	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
--											(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
-+					       (dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
- 	if (!desc_ptr)
- 	{
- 		printk("%s::DMA_MALLOC fail !\n",__func__);
-@@ -1071,12 +1086,16 @@ static void toe_init_gmac(struct net_dev
- 
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
- 	}
-@@ -1176,11 +1195,11 @@ static int toe_gmac_init_chip(struct net
- 	GMAC_CONFIG2_T	config2_val;
- 	GMAC_CONFIG0_T	config0,config0_mask;
- 	GMAC_CONFIG1_T	config1;
--	#ifdef CONFIG_SL351x_NAT
- 	GMAC_CONFIG3_T	config3_val;
--	#endif
- 	GMAC_TX_WCR0_T	hw_weigh;
- 	GMAC_TX_WCR1_T	sw_weigh;
-+
-+	uint32_t weight = 0;
- //	GMAC_HASH_ENABLE_REG0_T hash_ctrl;
- //
- #if 0 /* mac address will be set in late_initcall */
-@@ -1202,24 +1221,23 @@ static int toe_gmac_init_chip(struct net
- 	//	config1.bits32 = 0x002004;	//next version
- 	/* set flow control threshold */
- 	config1.bits32 = 0;
--	config1.bits.set_threshold = 32 / 2;
--	config1.bits.rel_threshold = 32 / 4 * 3;
-+	config1.bits.set_threshold = (32 / 2);
-+	config1.bits.rel_threshold = (32 / 4) * 3;
- 	gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
- 
--	/* set flow control threshold */
-+	/* TODO: set flow control threshold */
- 	config2_val.bits32 = 0;
--	config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
--	config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
-+	config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/4;
-+	config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM/2;
- 	gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
- 
--	#ifdef CONFIG_SL351x_NAT
--	/* set HW free queue flow control threshold */
-+	/* TODO: set HW free queue flow control threshold */
- 	config3_val.bits32 = 0;
- 	config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
- 	config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
- 	gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
--	#endif
--	/* set_mcast_filter mask*/
-+
-+	/* TODO: set_mcast_filter mask*/
- 	//	gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
- 	//  gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
- 
-@@ -1249,7 +1267,7 @@ static int toe_gmac_init_chip(struct net
- 	config0.bits.dis_rx = 1;  /* disable rx */
- 	config0.bits.dis_tx = 1;  /* disable tx */
- 	config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
--	config0.bits.rx_err_detect = 1;
-+	config0.bits.rx_err_detect = 1;	/* TODO: was 1, means disabled, 0 enabled ! */
- 	config0.bits.rgmii_en = 0;
- 	config0.bits.rgmm_edge = 1;
- 	config0.bits.rxc_inv = 0;
-@@ -1342,6 +1360,9 @@ static int toe_gmac_init_chip(struct net
- 	gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
- 	#endif
- 
-+	weight = gmac_read_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG);
-+	printk("====> %08X\n", weight);
-+
- 	#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
- 	gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
- 	#endif
-@@ -1552,7 +1573,7 @@ static  void toe_gmac_tx_complete(GMAC_I
- 		rwptr.bits32 = readl(swtxq->rwptr_reg);
- 		if (rwptr.bits.rptr == swtxq->finished_idx)
- 			break;
--    	curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+		curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
- //   		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
- 		word0.bits32 = curr_desc->word0.bits32;
- 		word1.bits32 = curr_desc->word1.bits32;
-@@ -1573,6 +1594,7 @@ static  void toe_gmac_tx_complete(GMAC_I
- 				swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
- 				curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
- 				word0.bits32 = curr_desc->word0.bits32;
-+
- #ifdef _DUMP_TX_TCP_CONTENT
- 				if (curr_desc->word0.bits.buffer_size < 16)
- 				{
-@@ -1592,12 +1614,12 @@ static  void toe_gmac_tx_complete(GMAC_I
- 			word0.bits.status_tx_ok = 0;
- 			if (swtxq->tx_skb[swtxq->finished_idx])
- 			{
--				if (interrupt)
--					dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
--				else
--					dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
-+				dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
- 				swtxq->tx_skb[swtxq->finished_idx] = NULL;
-+			} else {
-+				BUG();
- 			}
-+
- 			curr_desc->word0.bits32 = word0.bits32;
-   			swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
-  			swtxq->total_finished++;
-@@ -1624,31 +1646,29 @@ static  void toe_gmac_tx_complete(GMAC_I
- *----------------------------------------------------------------------*/
- static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
- {
--	GMAC_INFO_T 			*tp= dev->priv;
--//	static unsigned int     pcount = 0;
--//	unsigned int			tx_qid;
--    DMA_RWPTR_T				rwptr;
--	volatile GMAC_TXDESC_T	*curr_desc;
--	int 					snd_pages = skb_shinfo(skb)->nr_frags + 1;  /* get number of descriptor */
--	int 					frag_id = 0;
--	int 					len, total_len = skb->len;
-+	GMAC_INFO_T *tp= dev->priv;
-+	DMA_RWPTR_T rwptr;
-+	GMAC_TXDESC_T *curr_desc;
-+	int snd_pages = skb_shinfo(skb)->nr_frags + 1;  /* get number of descriptor */
-+	int frag_id = 0;
-+	int len, total_len = skb->len;
- 	struct net_device_stats *isPtr;
--	unsigned int			free_desc;
--	GMAC_SWTXQ_T			*swtxq;
-+	unsigned int free_desc;
-+	GMAC_SWTXQ_T *swtxq;
- 	register unsigned long	word0, word1, word2, word3;
- 	unsigned short			wptr, rptr;
- #ifdef	L2_jumbo_frame
- 	int header_len = skb->len;
- 	struct iphdr	*ip_hdr;
--    struct tcphdr	*tcp_hdr;
--    int             tcp_hdr_len;
--    unsigned char 	*ptr;
--    int             data_len,a;
--    unsigned int    val;
-+	struct tcphdr	*tcp_hdr;
-+	int             tcp_hdr_len;
-+	unsigned char 	*ptr;
-+	int             data_len,a;
-+	unsigned int    val;
- #endif
- 
- #ifdef GMAC_LEN_1_2_ISSUE
--	int						total_pages;
-+	int total_pages;
- 	total_pages = snd_pages;
- #endif
- 
-@@ -1664,13 +1684,6 @@ static int gmac_start_xmit(struct sk_buf
-     }
- #endif
- 
--#if 0
--	if (storlink_ctl.recvfile==2)
--	{
--	    printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
--	}
--#endif
--
- #ifdef GMAC_USE_TXQ0
- 	#define tx_qid 	0
- #endif
-@@ -1703,9 +1716,9 @@ static int gmac_start_xmit(struct sk_buf
- 	toe_gmac_tx_complete(tp, tx_qid, dev, 0);
- 
- 	if (wptr >= swtxq->finished_idx)
--		free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
-+		free_desc = swtxq->total_desc_num - wptr + swtxq->finished_idx;
- 	else
--		free_desc = swtxq->finished_idx - wptr - 1;
-+		free_desc = swtxq->finished_idx - wptr;
- 	if (free_desc < snd_pages)
- 	{
- //		spin_unlock(&tp->tx_mutex);
-@@ -2063,9 +2076,10 @@ void mac_start_txdma(struct net_device *
- struct net_device_stats * gmac_get_stats(struct net_device *dev)
- {
-     GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+#if 0	/* don't read stats from hardware, scary numbers. */
-     // unsigned int        flags;
--    unsigned int        pkt_drop;
--    unsigned int        pkt_error;
-+    unsigned int        pkt_drop = 0;
-+    unsigned int        pkt_error = 0;
- 
-     if (netif_running(dev))
-     {
-@@ -2073,10 +2087,14 @@ struct net_device_stats * gmac_get_stats
-         // spin_lock_irqsave(&tp->lock,flags);
-         pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
-         pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
-+	printk("**** stack: %lu, hw: %lu\n", tp->ifStatics.rx_dropped, pkt_drop);
-+
-         tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
-         tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
-         // spin_unlock_irqrestore(&tp->lock,flags);
-     }
-+#endif
-+
-     return &tp->ifStatics;
- }
- 
-@@ -2401,36 +2419,63 @@ static int gmac_close(struct net_device 
- * toe_gmac_fill_free_q
- * allocate buffers for free queue.
- *----------------------------------------------------------------------*/
--static inline void toe_gmac_fill_free_q(void)
-+static inline void toe_gmac_fill_free_q(int count)
- {
- 	struct sk_buff	*skb;
- 	volatile DMA_RWPTR_T	fq_rwptr;
- 	volatile GMAC_RXDESC_T	*fq_desc;
--	unsigned long	flags;
-+	unsigned long flags;
-+	unsigned short index;
-+	int filled = 0;
-+	static int entered;
- 	// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
- 
-+	BUG_ON(entered == 1);
-+
-+	entered = 1;
-+
-+
- 	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
- 	// spin_lock_irqsave(&gmac_fq_lock, flags);
- 	//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
- 	//				TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
--	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
--					TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-+	index = fq_rwptr.bits.wptr;
-+#if 0
-+	printk("wptr: %hu, rptr: %hu, refill idx: %hu\n",
-+	       GET_RPTR(fq_rwptr.bits32),
-+	       GET_WPTR(fq_rwptr.bits32),
-+	       index);
-+#endif
-+
-+	index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
-+	fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + index;
-+	while (fq_desc->word2.buf_adr == 0) {
-+		void *data = NULL;
-+
- 		if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
- 			printk("%s::skb allocation fail!\n", __func__);
--			//while(1);
--			break;
-+			goto out;
- 		}
--		REG32(skb->data) = (unsigned int)skb;
-+		++ filled;
-+		data = skb->data;
- 		skb_reserve(skb, SKB_RESERVE_BYTES);
--		// fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--		fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
--			TOE_SW_FREEQ_DESC_NUM);
--		fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
-+
-+		REG32(data + 0) = (unsigned int)skb;
-+		REG32(data + 4) = (unsigned short)index;
-+
-+		// printk("refill skb: %p, idx: %hu\n", skb, index);
- 		fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
--		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
--		toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+	writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, index);
-+	writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+
-+		index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
-+		fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+index;
- 	}
-+out:
- 	// spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+
-+	entered = 0;
- }
- // EXPORT_SYMBOL(toe_gmac_fill_free_q);
- 
-@@ -2442,14 +2487,14 @@ static void gmac_registers(const char *m
- 	unsigned int		status3;
- 	unsigned int		status4;
- 
--	printk("%s\n", message);
--
- 	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
- 	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
- 	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
- 	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
- 	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
- 
-+	printk("%s\n", message);
-+
- 	printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
- 		   status0, status1, status2, status3, status4);
- 
-@@ -2468,8 +2513,9 @@ static void gmac_registers(const char *m
- 	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
- 	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
- 
--	printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
--		   status0, status1, status2, status3, status4);
-+	if (status0 || status1 || status2 || status3 || status4)
-+			printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+				   status0, status1, status2, status3, status4);
- }
- /*----------------------------------------------------------------------
- * toe_gmac_interrupt
-@@ -2485,75 +2531,44 @@ static irqreturn_t toe_gmac_interrupt (i
- 	unsigned int		status3;
- 	unsigned int		status4;
- 
--//	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
- 	toe = (TOE_INFO_T *)&toe_private_data;
--//	handle NAPI
--#ifdef CONFIG_SL_NAPI
--	/* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
--if (1)
--{
--/* disable GMAC interrupt */
--    //toe_gmac_disable_interrupt(tp->irq);
- 
--//	isPtr->interrupts++;
-+	if (0 && rx_poll_enabled) {
-+		gmac_registers("interrupt handler");
-+	}
-+
- 	/* read Interrupt status */
- 	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
- 	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
- 	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
- 	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
- 	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
--	// prompt warning if status bit ON but not enabled
-+
- #if 0
--	if (status0 & ~tp->intr0_enabled)
--		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
--				status0, tp->intr0_enabled);
--	if (status1 & ~tp->intr1_enabled)
--		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
--				status1, tp->intr1_enabled);
--	if (status2 & ~tp->intr2_enabled)
--		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
--				status2, tp->intr2_enabled);
--	if (status3 & ~tp->intr3_enabled)
--		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
--				status3, tp->intr3_enabled);
--	if (status4 & ~tp->intr4_enabled)
--		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
--				status4, tp->intr4_enabled);
-+	/* handle freeq interrupt first */
-+	if (status4 & SWFQ_EMPTY_INT_BIT)
-+	{
-+		toe_gmac_fill_free_q();
-+		writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+		tp->sw_fq_empty_cnt++;
-+	}
- #endif
- 
-+	if (status4 & GMAC0_MIB_INT_BIT)
-+		writel(GMAC0_MIB_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+	if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-+		writel(GMAC0_RX_OVERRUN_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
- 	if (status0)
- 		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
--	if (status1)
--		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
- 	if (status2)
- 		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
- 	if (status3)
- 		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
--	if (status4)
--		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
--
--#if 0
--	/* handle freeq interrupt first */
--	if (status4 & tp->intr4_enabled) {
--		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
--		{
--			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
--			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--
--			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
--				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
--			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
--				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
--			printk("\nfreeq int\n");
--			toe_gmac_fill_free_q();
--			tp->sw_fq_empty_cnt++;
- 
--		}
--	}
--#endif
- 	// Interrupt Status 1
--	if (status1 & tp->intr1_enabled)
-+	if ((status1 & 3) || (status4 & 1))
- 	{
- 		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
- 		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-@@ -2563,7 +2578,7 @@ if (1)
- 		// because they should pass packets to upper layer
- 		if (tp->port_id == 0)
- 		{
--			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-+			if (((status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) || (status4 & 1))
- 			{
- 				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
- 					tp->hwtxq[3].eof_cnt++;
-@@ -2574,50 +2589,51 @@ if (1)
- 				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
- 					tp->hwtxq[0].eof_cnt++;
- 			}
--				if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-+			if (status1 & DEFAULT_Q0_INT_BIT || status4 & 1)
-+			{
-+				if (likely(netif_rx_schedule_prep(dev)))
- 				{
--					if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
--        			{
--        				unsigned int data32;
-+					unsigned int data32;
-+
-+					BUG_ON(rx_poll_enabled == 1);
- 
--						if (rx_poll_enabled)
--								gmac_registers("check #1");
-+					/* Masks GMAC-0 rx interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					data32 &= ~(DEFAULT_Q0_INT_BIT);
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 
--						BUG_ON(rx_poll_enabled == 1);
-+					/* Masks GMAC-0 queue empty interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+					data32 &= ~DEFAULT_Q0_INT_BIT;
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- 
-+					__netif_rx_schedule(dev);
-+					rx_poll_enabled = 1;
-+				} else {
- #if 0
--        				/* Masks GMAC-0 rx interrupt */
--						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--						data32 &= ~(DEFAULT_Q0_INT_BIT);
--						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--
--        				/* Masks GMAC-0 queue empty interrupt */
--						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
--						data32 &= ~DEFAULT_Q0_INT_BIT;
--						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
--
--						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
--						data32 &= ~DEFAULT_Q0_INT_BIT;
--						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
--#endif
--
--        				// class-Q & TOE-Q are implemented in future
--        				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--        				//data32 &= ~DEFAULT_Q0_INT_BIT;
--						//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--						//printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
--						writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
--						//tp->total_q_cnt_napi=0;
--						//rx_time = jiffies;
--						//rx_old_bytes = isPtr->rx_bytes;
--						__netif_rx_schedule(dev);
--						rx_poll_enabled = 1;
--        			}
-+					unsigned int data32;
-+
-+					if (rx_poll_enabled)
-+						gmac_registers("->poll() running.");
-+					/* Masks GMAC-0 rx interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					data32 &= ~(DEFAULT_Q0_INT_BIT);
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+					/* Masks GMAC-0 queue empty interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+					data32 &= ~DEFAULT_Q0_INT_BIT;
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+#endif
-+				}
-+			} else {
-+				if (0)
-+					gmac_registers("status1 & DEFAULT_Q0_INT_BIT || status4 & 1");
- 			}
- 		}
--		else if (tp->port_id == 1)
-+		else if (tp->port_id == 1 && netif_running(dev))
- 		{
--			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-+			if ((status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
- 			{
- 				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
- 					tp->hwtxq[3].eof_cnt++;
-@@ -2629,14 +2645,14 @@ if (1)
- 					tp->hwtxq[0].eof_cnt++;
- 			}
- 
--			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-+			if ((status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
- 			{
- 				if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
--        		{
--        			unsigned int data32;
-+				{
-+					unsigned int data32;
- 
- 					if (rx_poll_enabled)
--							gmac_registers("check #2");
-+						gmac_registers("check #2");
- 
- 					BUG_ON(rx_poll_enabled == 1);
- 
-@@ -2646,7 +2662,7 @@ if (1)
- 					data32 &= ~(DEFAULT_Q1_INT_BIT);
- 					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 
--        			/* Masks GMAC-1 queue empty interrupt */
-+					/* Masks GMAC-1 queue empty interrupt */
- 					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- 					data32 &= ~DEFAULT_Q1_INT_BIT;
- 					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-@@ -2656,24 +2672,21 @@ if (1)
- 					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
- #endif
- 
--         			// disable GMAC-0 rx interrupt
--        			// class-Q & TOE-Q are implemented in future
--        			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--        			//data32 &= ~DEFAULT_Q1_INT_BIT;
-+					// disable GMAC-0 rx interrupt
-+					// class-Q & TOE-Q are implemented in future
-+					//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					//data32 &= ~DEFAULT_Q1_INT_BIT;
- 					//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 					//printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
- 					writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
- 					//tp->total_q_cnt_napi=0;
- 					//rx_time = jiffies;
- 					//rx_old_bytes = isPtr->rx_bytes;
--           			__netif_rx_schedule(dev);
--				rx_poll_enabled = 1;
--        		}
-+					__netif_rx_schedule(dev);
-+					rx_poll_enabled = 1;
-+				}
- 			}
- 		}
--	} else {
--
--		gmac_registers("check #3");
- 	}
- 
- 	// Interrupt Status 0
-@@ -2814,676 +2827,93 @@ if (1)
- 		}
- 	}
- 
--	//toe_gmac_enable_interrupt(tp->irq);
--#ifdef IxscriptMate_1518
--	if (storlink_ctl.pauseoff == 1)
--	{
--		GMAC_CONFIG0_T config0;
--		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 0;
--		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 0;
--		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--	}
--#endif
--//	 enable_irq(gmac_irq[dev_index]);
--	//printk("gmac_interrupt complete!\n\n");
--//	return IRQ_RETVAL(handled);
- 	return	IRQ_RETVAL(1);
- }
--else
--{
--#endif	//endif NAPI
- 
-+/*----------------------------------------------------------------------
-+* gmac_get_phy_vendor
-+*----------------------------------------------------------------------*/
-+static unsigned int gmac_get_phy_vendor(int phy_addr)
-+{
-+    unsigned int	reg_val;
-+    reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
-+    return reg_val;
-+}
- 
--	/* disable GMAC interrupt */
--    toe_gmac_disable_interrupt(tp->irq);
-+/*----------------------------------------------------------------------
-+* gmac_set_phy_status
-+*----------------------------------------------------------------------*/
-+void gmac_set_phy_status(struct net_device *dev)
-+{
-+	GMAC_INFO_T *tp = dev->priv;
-+	GMAC_STATUS_T   status;
-+	unsigned int    reg_val, ability,wan_port_id;
-+	unsigned int    i = 0;
- 
--//	isPtr->interrupts++;
--	/* read Interrupt status */
--	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
--	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
--	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
--	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
--	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
--	// prompt warning if status bit ON but not enabled
-+#ifdef VITESSE_G5SWITCH
-+	if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
- #if 0
--	if (status0 & ~tp->intr0_enabled)
--		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
--				status0, tp->intr0_enabled);
--	if (status1 & ~tp->intr1_enabled)
--		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
--				status1, tp->intr1_enabled);
--	if (status2 & ~tp->intr2_enabled)
--		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
--				status2, tp->intr2_enabled);
--	if (status3 & ~tp->intr3_enabled)
--		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
--				status3, tp->intr3_enabled);
--	if (status4 & ~tp->intr4_enabled)
--		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
--				status4, tp->intr4_enabled);
--#endif
--#define	INTERRUPT_SELECT			1
--	if (status0)
--		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
--	if (status1)
--		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
--	if (status2)
--		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
--	if (status3)
--		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
--	if (status4)
--		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
--
--	/* handle freeq interrupt first */
--	if (status4 & tp->intr4_enabled) {
--		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
--		{
--			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
--			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--
--			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
--			//	SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
--				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
--			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
--				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
--			printk("\nfreeq int\n");
--			toe_gmac_fill_free_q();
--			tp->sw_fq_empty_cnt++;
--
--			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
--				SWFQ_EMPTY_INT_BIT);
--		}
--	}
--
--	// Interrupt Status 1
--	if (status1 & tp->intr1_enabled)
--	{
--		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
--		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
--		// Handle GMAC 0/1 HW Tx queue 0-3 EOF events
--		// Only count
--		// TOE, Classification, and default queues interrupts are handled by ISR
--		// because they should pass packets to upper layer
--		if (tp->port_id == 0)
--		{
--#ifndef	INTERRUPT_SELECT
--			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
--			{
--				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
--					tp->hwtxq[3].eof_cnt++;
--				if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
--					tp->hwtxq[2].eof_cnt++;
--				if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
--					tp->hwtxq[1].eof_cnt++;
--				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
--					tp->hwtxq[0].eof_cnt++;
--#endif	//INTERRUPT_SELECT
--#ifndef	INTERRUPT_SELECT
--			}
--#endif	//INTERRUPT_SELECT
--			if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
--			{
--				tp->default_q_intr_cnt++;
--				toe_gmac_handle_default_rxq(dev, tp);
-+		rcv_mask = SPI_read(2,0,0x10);			// Receive mask
-+		rcv_mask |= 0x4F;
-+		for(i=0;i<4;i++){
-+			reg_val = BIT(26)|(i<<21)|(10<<16);
-+			SPI_write(3,0,1,reg_val);
-+			msleep(10);
-+			reg_val = SPI_read(3,0,2);
-+			if(reg_val & 0x0c00){
-+				printk("Port%d:Giga mode\n",i);
-+				SPI_write(1,i,0x00,0x300701B1);
-+				SPI_write(1,i,0x00,0x10070181);
-+				switch_pre_link[i]=LINK_UP;
-+				switch_pre_speed[i]=GMAC_SPEED_1000;
- 			}
--#ifdef CONFIG_SL351x_RXTOE
--			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
--			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
--				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
--				toe_gmac_handle_toeq(dev, tp, status1);
--				//toe_gmac_handle_toeq(dev, toe, tp, status1);
-+			else{
-+				reg_val = BIT(26)|(i<<21)|(5<<16);
-+				SPI_write(3,0,1,reg_val);
-+				msleep(10);
-+				ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
-+				if ((ability & 0x0C)) /* 100M full duplex */
-+				{
-+					SPI_write(1,i,0x00,0x30050472);
-+					SPI_write(1,i,0x00,0x10050442);
-+					printk("Port%d:100M\n",i);
-+					switch_pre_link[i]=LINK_UP;
-+				switch_pre_speed[i]=GMAC_SPEED_100;
-+				}
-+				else if((ability & 0x03)) /* 10M full duplex */
-+				{
-+					SPI_write(1,i,0x00,0x30050473);
-+					SPI_write(1,i,0x00,0x10050443);
-+					printk("Port%d:10M\n",i);
-+					switch_pre_link[i]=LINK_UP;
-+					switch_pre_speed[i]=GMAC_SPEED_10;
-+				}
-+				else{
-+					SPI_write(1,i,0x00,BIT(16));			// disable RX
-+					SPI_write(5,0,0x0E,BIT(i));			// dicard packet
-+					while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
-+						msleep(1);
-+
-+					SPI_write(1,i,0x00,0x20000030);			// PORT_RST
-+					switch_pre_link[i]=LINK_DOWN;
-+					switch_pre_speed[i]=GMAC_SPEED_10;
-+					rcv_mask &= ~BIT(i);
-+					SPI_write(2,0,0x10,rcv_mask);			// Disable Receive
-+				}
- 			}
--#endif
- 		}
--		else if (tp->port_id == 1)
--		{
--#ifndef	INTERRUPT_SELECT
--			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
--			{
--				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
--					tp->hwtxq[3].eof_cnt++;
--				if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
--					tp->hwtxq[2].eof_cnt++;
--				if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
--					tp->hwtxq[1].eof_cnt++;
--				if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
--					tp->hwtxq[0].eof_cnt++;
--#endif	//INTERRUPT_SELECT
--#ifndef	INTERRUPT_SELECT
--			}
--#endif	//INTERRUPT_SELECT
--			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
--			{
--				tp->default_q_intr_cnt++;
--				toe_gmac_handle_default_rxq(dev, tp);
--			}
--#ifdef CONFIG_SL351x_RXTOE
--			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
--			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
--				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
--				toe_gmac_handle_toeq(dev, tp, status1);
--				//toe_gmac_handle_toeq(dev, toe, tp, status1);
--			}
- #endif
--		}
-+		gmac_get_switch_status(dev);
-+		gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
-+//		SPI_write(2,0,0x10,rcv_mask);			// Enable Receive
-+		return ;
- 	}
-+#endif
- 
-+	reg_val = gmac_get_phy_vendor(tp->phy_addr);
-+	printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
- 
--	// Interrupt Status 0
--	if (status0 & tp->intr0_enabled)
--	{
--
--		#define ERR_INTR_BITS	(GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |	\
--								 GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |	\
--								 GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |	\
--								 GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
--#ifndef	INTERRUPT_SELECT
--		if (status0 &  ERR_INTR_BITS)
--		{
--			if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
--			{
--				tp->txDerr_cnt[0]++;
--				printk("GMAC0 TX AHB Bus Error!\n");
--			}
--			if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
--			{
--				tp->txPerr_cnt[0]++;
--				printk("GMAC0 Tx Descriptor Protocol Error!\n");
--			}
--			if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
--			{
--				tp->txDerr_cnt[1]++;
--				printk("GMAC1 Tx AHB Bus Error!\n");
--			}
--			if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
--			{
--				tp->txPerr_cnt[1]++;
--				printk("GMAC1 Tx Descriptor Protocol Error!\n");
--			}
--
--			if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
--			{
--				tp->RxDerr_cnt[0]++;
--				printk("GMAC0 Rx AHB Bus Error!\n");
--			}
--			if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
--			{
--				tp->RxPerr_cnt[0]++;
--				printk("GMAC0 Rx Descriptor Protocol Error!\n");
--			}
--			if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
--			{
--				tp->RxDerr_cnt[1]++;
--				printk("GMAC1 Rx AHB Bus Error!\n");
--			}
--			if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
--			{
--				tp->RxPerr_cnt[1]++;
--				printk("GMAC1 Rx Descriptor Protocol Error!\n");
--			}
--		}
--#endif	//INTERRUPT_SELECT
--#ifndef	GMAX_TX_INTR_DISABLED
--		if (tp->port_id == 1 &&	netif_running(dev) &&
--			(((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
--			||
--			((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
--		{
--			toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
--		}
--
--		if (tp->port_id == 0 &&	netif_running(dev) &&
--			(((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
--			||
--			((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
--		{
--			toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
--		}
--#endif
--		// clear enabled status bits
--	}
--	// Interrupt Status 4
--#ifndef	INTERRUPT_SELECT
--	if (status4 & tp->intr4_enabled)
--	{
--		#define G1_INTR4_BITS		(0xff000000)
--		#define G0_INTR4_BITS		(0x00ff0000)
--
--		if (tp->port_id == 0)
--		{
--			if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
--			{
--				if (status4 & GMAC0_RESERVED_INT_BIT)
--					printk("GMAC0_RESERVED_INT_BIT is ON\n");
--				if (status4 & GMAC0_MIB_INT_BIT)
--					tp->mib_full_cnt++;
--				if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
--					tp->rx_pause_on_cnt++;
--				if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
--					tp->tx_pause_on_cnt++;
--				if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
--					tp->rx_pause_off_cnt++;
--				if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
--					tp->rx_pause_off_cnt++;
--				if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
--					tp->rx_overrun_cnt++;
--				if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
--					tp->status_changed_cnt++;
--			}
--		}
--		else if (tp->port_id == 1)
--		{
--			if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
--			{
--				if (status4 & GMAC1_RESERVED_INT_BIT)
--					printk("GMAC1_RESERVED_INT_BIT is ON\n");
--				if (status4 & GMAC1_MIB_INT_BIT)
--					tp->mib_full_cnt++;
--				if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
--				{
--					//printk("Gmac pause on\n");
--					tp->rx_pause_on_cnt++;
--				}
--				if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
--				{
--					//printk("Gmac pause on\n");
--					tp->tx_pause_on_cnt++;
--				}
--				if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
--				{
--					//printk("Gmac pause off\n");
--					tp->rx_pause_off_cnt++;
--				}
--				if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
--				{
--					//printk("Gmac pause off\n");
--					tp->rx_pause_off_cnt++;
--				}
--				if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
--				{
--					//printk("Gmac Rx Overrun \n");
--					tp->rx_overrun_cnt++;
--				}
--				if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
--					tp->status_changed_cnt++;
--			}
--		}
--#if 0
--		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
--		{
--			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--//			mac_stop_rxdma(tp->sc);
--			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
--				tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--
--			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
--				SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--			toe_gmac_fill_free_q();
--			tp->sw_fq_empty_cnt++;
--
--			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
--				SWFQ_EMPTY_INT_BIT);
--//#if 0
--/*			if (netif_running(dev))
--				toe_gmac_handle_default_rxq(dev, tp);
--			printk("SWFQ_EMPTY_INT_BIT is ON!\n");	// should not be happened */
--//#endif
--		}
--#endif
--	}
--#endif	//INTERRUPT_SELECT
--	toe_gmac_enable_interrupt(tp->irq);
--//enable gmac rx function when do RFC 2544
--#ifdef IxscriptMate_1518
--	if (storlink_ctl.pauseoff == 1)
--	{
--		GMAC_CONFIG0_T config0;
--		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 0;
--		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 0;
--		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--	}
--#endif
--	//printk("gmac_interrupt complete!\n\n");
--//	return IRQ_RETVAL(handled);
--	return	IRQ_RETVAL(1);
--#ifdef CONFIG_SL_NAPI
--}
--#endif
--}
--
--/*----------------------------------------------------------------------
--*	toe_gmac_handle_default_rxq
--*	(1) Get rx Buffer for default Rx queue
--*	(2) notify or call upper-routine to handle it
--*	(3) get a new buffer and insert it into SW free queue
--*	(4) Note: The SW free queue Read-Write Pointer should be locked when accessing
--*----------------------------------------------------------------------*/
--//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
--static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
--{
--	TOE_INFO_T			*toe;
--    GMAC_RXDESC_T   	*curr_desc;
--	struct sk_buff 		*skb;
--    DMA_RWPTR_T			rwptr;
--	unsigned int 		pkt_size;
--	int					max_cnt;
--	unsigned int        desc_count;
--	unsigned int        good_frame, chksum_status, rx_status;
--	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
--
--//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
--#ifdef IxscriptMate_1518
--	if (storlink_ctl.pauseoff == 1)
--	{
--		GMAC_CONFIG0_T config0;
--		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 1;
--		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 1;
--		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--	}
--#endif
--	rwptr.bits32 = readl(&tp->default_qhdr->word1);
--#if 0
--	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
--	{
--		mac_stop_txdma((struct net_device *)tp->dev);
--		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
--				rwptr.bits32, tp->rx_rwptr.bits.rptr);
--		while(1);
--	}
--#endif
--	toe = (TOE_INFO_T *)&toe_private_data;
--	max_cnt = DEFAULT_RXQ_MAX_CNT;
--	while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
--//	while (rwptr.bits.rptr != rwptr.bits.wptr)
--	{
--//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
--#ifdef IxscriptMate_1518
--    	if (storlink_ctl.pauseoff == 1)
--		{
--			if (pkt_size != 1514)
--			{
--						GMAC_CONFIG0_T config0;
--						config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--						config0.bits.dis_rx = 0;
--						writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--						config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--						config0.bits.dis_rx = 0;
--						writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--			}
--		}
--#endif
--    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
--//		consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
--		tp->default_q_cnt++;
--    	tp->rx_curr_desc = (unsigned int)curr_desc;
--    	rx_status = curr_desc->word0.bits.status;
--    	chksum_status = curr_desc->word0.bits.chksum_status;
--    	tp->rx_status_cnt[rx_status]++;
--    	tp->rx_chksum_cnt[chksum_status]++;
--        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
--		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
--		good_frame=1;
--		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
--			|| (pkt_size < 60)
--		    || (chksum_status & 0x4)
--			|| rx_status)
--		{
--			good_frame = 0;
--			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
--				printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
--			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
--				printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
--			if (rx_status)
--			{
--				if (rx_status == 4 || rx_status == 7)
--					isPtr->rx_crc_errors++;
--//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
--			}
--#ifdef SL351x_GMAC_WORKAROUND
--			else if (pkt_size < 60)
--			{
--				if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
--					tp->short_frames_cnt++;
--				if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
--				{
--					GMAC_CONFIG0_T config0;
--					config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--					config0.bits.dis_rx = 1;
--					writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--					config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--					config0.bits.dis_rx = 1;
--					writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--				}
--			}
--#endif
--//			if (chksum_status)
--//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
--			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
--			dev_kfree_skb_irq(skb);
--		}
--		if (good_frame)
--		{
--			if (curr_desc->word0.bits.drop)
--				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
--//			if (chksum_status)
--//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
--
--	    	/* get frame information from the first descriptor of the frame */
--#ifdef SL351x_GMAC_WORKAROUND
--			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
--			{
--				GMAC_CONFIG0_T config0;
--				config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--				config0.bits.dis_rx = 0;
--				writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--				config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--				config0.bits.dis_rx = 0;
--				writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--			}
--			tp->short_frames_cnt = 0;
--#endif
--			isPtr->rx_packets++;
--			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
--			if (!skb)
--			{
--				printk("Fatal Error!!skb==NULL\n");
--				goto next_rx;
--			}
--			tp->curr_rx_skb = skb;
--			// consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
--
--	//		curr_desc->word2.buf_adr = 0;
--
--			skb_reserve (skb, RX_INSERT_BYTES);	/* 16 byte align the IP fields. */
--			skb_put(skb, pkt_size);
--			skb->dev = dev;
--			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
--			{
--				skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
--				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
--				{
--					struct iphdr	*ip_hdr;
--					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
--					sl351x_nat_input(skb,
--									tp->port_id,
--									(void *)curr_desc->word3.bits.l3_offset,
--								  	(void *)curr_desc->word3.bits.l4_offset);
--				}
--#endif
--				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--#if 0
--#ifdef CONFIG_SL351x_RXTOE
--				if (storlink_ctl.rx_max_pktsize) {
--					struct iphdr	*ip_hdr;
--					struct tcphdr	*tcp_hdr;
--					int ip_hdrlen;
--
-- 					ip_hdr = (struct iphdr*)&(skb->data[0]);
--					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
--					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
--						ip_hdrlen = ip_hdr->ihl << 2;
--						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
--						if (tcp_hdr->syn) {
--							struct toe_conn* connection = init_toeq(ip_hdr->version,
--									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
--							TCP_SKB_CB(skb)->connection = connection;
--							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
--							//		printk("%s::skb data %x, conn %x, mode %x\n",
--							//			__func__, skb->data, connection, connection->mode);
--						}
--					}
--				}
--#endif
--#endif
--			}
--			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
--			{
--				skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
--				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
--				{
--					struct iphdr		*ip_hdr;
--					//struct tcphdr		*tcp_hdr;
--					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
--					//tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
--					if (ip_hdr->protocol == IPPROTO_UDP)
--					{
--						sl351x_nat_input(skb,
--										tp->port_id,
--										(void *)curr_desc->word3.bits.l3_offset,
--								  		(void *)curr_desc->word3.bits.l4_offset);
--					}
--					else if (ip_hdr->protocol == IPPROTO_GRE)
--					{
--						sl351x_nat_input(skb,
--									tp->port_id,
--									(void *)curr_desc->word3.bits.l3_offset,
--								  	(void *)curr_desc->word3.bits.l4_offset);
--					}
--				}
--#endif
--				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--			}
--			else
--			{
--				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--			}
--
--			netif_rx(skb);  /* socket rx */
--			dev->last_rx = jiffies;
--
--			isPtr->rx_bytes += pkt_size;
--
--        }
--
--next_rx:
--		// advance one for Rx default Q 0/1
--		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
--		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
--     	tp->rx_rwptr.bits32 = rwptr.bits32;
--
--	}
--
--	/* Handles first available packets only then refill the queue. */
--	toe_gmac_fill_free_q();
--}
--
--/*----------------------------------------------------------------------
--* gmac_get_phy_vendor
--*----------------------------------------------------------------------*/
--static unsigned int gmac_get_phy_vendor(int phy_addr)
--{
--    unsigned int	reg_val;
--    reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
--    return reg_val;
--}
--
--/*----------------------------------------------------------------------
--* gmac_set_phy_status
--*----------------------------------------------------------------------*/
--void gmac_set_phy_status(struct net_device *dev)
--{
--	GMAC_INFO_T *tp = dev->priv;
--	GMAC_STATUS_T   status;
--	unsigned int    reg_val, ability,wan_port_id;
--	unsigned int    i = 0;
--
--#ifdef VITESSE_G5SWITCH
--	if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
--#if 0
--		rcv_mask = SPI_read(2,0,0x10);			// Receive mask
--		rcv_mask |= 0x4F;
--		for(i=0;i<4;i++){
--			reg_val = BIT(26)|(i<<21)|(10<<16);
--			SPI_write(3,0,1,reg_val);
--			msleep(10);
--			reg_val = SPI_read(3,0,2);
--			if(reg_val & 0x0c00){
--				printk("Port%d:Giga mode\n",i);
--				SPI_write(1,i,0x00,0x300701B1);
--				SPI_write(1,i,0x00,0x10070181);
--				switch_pre_link[i]=LINK_UP;
--				switch_pre_speed[i]=GMAC_SPEED_1000;
--			}
--			else{
--				reg_val = BIT(26)|(i<<21)|(5<<16);
--				SPI_write(3,0,1,reg_val);
--				msleep(10);
--				ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
--				if ((ability & 0x0C)) /* 100M full duplex */
--				{
--					SPI_write(1,i,0x00,0x30050472);
--					SPI_write(1,i,0x00,0x10050442);
--					printk("Port%d:100M\n",i);
--					switch_pre_link[i]=LINK_UP;
--				switch_pre_speed[i]=GMAC_SPEED_100;
--				}
--				else if((ability & 0x03)) /* 10M full duplex */
--				{
--					SPI_write(1,i,0x00,0x30050473);
--					SPI_write(1,i,0x00,0x10050443);
--					printk("Port%d:10M\n",i);
--					switch_pre_link[i]=LINK_UP;
--					switch_pre_speed[i]=GMAC_SPEED_10;
--				}
--				else{
--					SPI_write(1,i,0x00,BIT(16));			// disable RX
--					SPI_write(5,0,0x0E,BIT(i));			// dicard packet
--					while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
--						msleep(1);
--
--					SPI_write(1,i,0x00,0x20000030);			// PORT_RST
--					switch_pre_link[i]=LINK_DOWN;
--					switch_pre_speed[i]=GMAC_SPEED_10;
--					rcv_mask &= ~BIT(i);
--					SPI_write(2,0,0x10,rcv_mask);			// Disable Receive
--				}
--			}
--		}
--#endif
--		gmac_get_switch_status(dev);
--		gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
--//		SPI_write(2,0,0x10,rcv_mask);			// Enable Receive
--		return ;
--	}
--#endif
--
--	reg_val = gmac_get_phy_vendor(tp->phy_addr);
--	printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
--
--	switch (tp->phy_mode)
-+	switch (tp->phy_mode)
- 	{
- 		case GMAC_PHY_GMII:
- 		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-@@ -3552,6 +2982,7 @@ void gmac_set_phy_status(struct net_devi
- 		status.bits.link = LINK_DOWN;
- 		//		clear_bit(__LINK_STATE_START, &dev->state);
- 		printk("Link Down (0x%04x) ", reg_val);
-+#ifdef VITESSE_G5SWITCH
- 		if(Giga_switch == 1)
- 		{
- 				wan_port_id = 1;
-@@ -3565,6 +2996,7 @@ void gmac_set_phy_status(struct net_devi
- 				storlink_ctl.link[ tp->port_id] = 0;
- #endif
- 		}
-+#endif
- 	}
- 	else
- 	{
-@@ -3572,6 +3004,7 @@ void gmac_set_phy_status(struct net_devi
- 		status.bits.link = LINK_UP;
- 		//		set_bit(__LINK_STATE_START, &dev->state);
- 		printk("Link Up (0x%04x) ",reg_val);
-+#ifdef VITESSE_G5SWITCH
- 		if(Giga_switch == 1)
- 		{
- 				wan_port_id = 1;
-@@ -3585,6 +3018,7 @@ void gmac_set_phy_status(struct net_devi
- 				storlink_ctl.link[ tp->port_id] = 1;
- #endif
- 		}
-+#endif
- 	}
- 	//    value = mii_read(PHY_ADDR,0x05);
- 
-@@ -3863,6 +3297,7 @@ void gmac_get_phy_status(struct net_devi
- 			}
- 		}
- 		status.bits.link = LINK_UP; /* link up */
-+#ifdef VITESSE_G5SWITCH
- 		if(Giga_switch==1)
- 		{
- 				wan_port_id = 1;
-@@ -3874,6 +3309,7 @@ void gmac_get_phy_status(struct net_devi
- 				storlink_ctl.link[ tp->port_id] = 1;
- #endif
- 		}
-+#endif
- 		if ((ability & 0x20)==0x20)
- 		{
- 			if (tp->flow_control_enable == 0)
-@@ -3914,6 +3350,7 @@ void gmac_get_phy_status(struct net_devi
- 	else
- 	{
- 		status.bits.link = LINK_DOWN; /* link down */
-+#ifdef VITESSE_G5SWITCH
- 		if(Giga_switch == 1)
- 		{
- 				wan_port_id = 1;
-@@ -3925,6 +3362,7 @@ void gmac_get_phy_status(struct net_devi
- 				storlink_ctl.link[ tp->port_id] = 0;
- #endif
- 		}
-+#endif
- 		if (tp->pre_phy_status == LINK_UP)
- 		{
- 			printk("GMAC-%d LINK_Down......\n",tp->port_id);
-@@ -4298,86 +3736,102 @@ static void gmac_set_rx_mode(struct net_
- }
- 
- #ifdef CONFIG_SL_NAPI
-+
-+static int gmax_rx(struct net_device *dev, int *budget)
-+{
-+	return 0;
-+}
-+
-+static int gmac_tx(struct net_device *dev, int *budget)
-+{
-+	return 0;
-+}
-+
- /*----------------------------------------------------------------------
- * gmac_rx_poll
- *----------------------------------------------------------------------*/
- static int gmac_rx_poll(struct net_device *dev, int *budget)
- {
--	TOE_INFO_T			*toe;
--    GMAC_RXDESC_T   	*curr_desc;
--	struct sk_buff 		*skb;
--    DMA_RWPTR_T			rwptr;
--    unsigned int data32;
--	unsigned int 		pkt_size;
--	unsigned int        desc_count;
--	unsigned int        good_frame, chksum_status, rx_status;
--	int                 rx_pkts_num = 0;
--	int                 quota = min(dev->quota, *budget);
--	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
--	unsigned int		status4;
--	volatile DMA_RWPTR_T	fq_rwptr;
--	// int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
--	//unsigned long		rx_old_bytes;
-+	TOE_INFO_T	*toe;
-+	GMAC_RXDESC_T	*curr_desc;
-+	struct sk_buff	*skb;
-+	DMA_RWPTR_T	rwptr;
-+	unsigned int	data32;
-+	unsigned int	pkt_size;
-+	unsigned int	desc_count;
-+	unsigned int	good_frame, chksum_status, rx_status;
-+	int		rx_pkts_num = 0;
-+	int		quota = min(dev->quota, *budget);
-+	GMAC_INFO_T	*tp = (GMAC_INFO_T *)dev->priv;
-+	unsigned int	status1;
-+	unsigned int	status4;
- 	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
--	//unsigned long long	rx_time;
--
- 
- 	BUG_ON(rx_poll_enabled == 0);
--#if 1
--	if (do_again)
--	{
--			toe_gmac_fill_free_q();
--			status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
--			fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--			//printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
--			if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
--			{
--						//status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
--						do_again =0;
--						//netif_rx_complete(dev);
--						gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,	0x1);
--						fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--						rwptr.bits32 = readl(&tp->default_qhdr->word1);
--			}
--			else
--				return 1;
--	}
--#endif
--	rwptr.bits32 = readl(&tp->default_qhdr->word1);
--#if 0
--	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
--	{
--		mac_stop_txdma((struct net_device *)tp->dev);
--		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
--				rwptr.bits32, tp->rx_rwptr.bits.rptr);
--		while(1);
--	}
--#endif
-+
- 	toe = (TOE_INFO_T *)&toe_private_data;
- 
--	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--	//printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x),   fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
--	//printk("%s:---Before while   rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
--//	while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
-+rx_poll_retry:
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	if (status1 & 1) {
-+		writel(1, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	}
- 
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1);
- 	while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
- 	{
--
--    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+		curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
- 		tp->default_q_cnt++;
--    	tp->rx_curr_desc = (unsigned int)curr_desc;
--    	rx_status = curr_desc->word0.bits.status;
--    	chksum_status = curr_desc->word0.bits.chksum_status;
--    	tp->rx_status_cnt[rx_status]++;
--    	tp->rx_chksum_cnt[chksum_status]++;
--        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
-+		tp->rx_curr_desc = (unsigned int)curr_desc;
-+		rx_status = curr_desc->word0.bits.status;
-+		chksum_status = curr_desc->word0.bits.chksum_status;
-+		tp->rx_status_cnt[rx_status]++;
-+		tp->rx_chksum_cnt[chksum_status]++;
-+		pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
- 		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
- 		good_frame=1;
-+
-+		if (0) {
-+
-+				int free, busy;
-+				uint32_t rwptr1;
-+				uint32_t rwptr2;
-+
-+				rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+				free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
-+
-+				rwptr2 = readl(&tp->default_qhdr->word1);
-+				busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
-+
-+				if (GET_WPTR(rwptr1) == GET_RPTR(rwptr1)) {
-+					printk("frame  status: %d\n"
-+					       "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
-+					       "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
-+					       rx_status,
-+					       GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
-+					       GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
-+				}
-+		}
-+
-+		{
-+			GMAC_RXDESC_T	*fq_desc;
-+			void *data;
-+			struct sk_buff *skb;
-+			unsigned short idx;
-+
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			idx = (unsigned short)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES + 4));
-+
-+			BUG_ON(idx > TOE_SW_FREEQ_DESC_NUM);
-+			BUG_ON(skb == NULL);
-+			fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + idx;
-+			fq_desc->word2.buf_adr = 0;
-+		}
-+
- 		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
--			|| (pkt_size < 60)
-+		    || (pkt_size < 60)
- 		    || (chksum_status & 0x4)
- 		    || rx_status )
--//			|| rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
- 		{
- 			good_frame = 0;
- 			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-@@ -4388,7 +3842,6 @@ static int gmac_rx_poll(struct net_devic
- 			{
- 				if (rx_status == 4 || rx_status == 7)
- 					isPtr->rx_crc_errors++;
--//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
- 			}
- #ifdef SL351x_GMAC_WORKAROUND
- 			else if (pkt_size < 60)
-@@ -4407,17 +3860,32 @@ static int gmac_rx_poll(struct net_devic
- 				}
- 			}
- #endif
--//			if (chksum_status)
--//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
- 			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
--			dev_kfree_skb_irq(skb);
-+			dev_kfree_skb(skb);
-+
-+			if (0) {
-+				int free, busy;
-+				uint32_t rwptr1;
-+				uint32_t rwptr2;
-+
-+				rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+				free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
-+
-+				rwptr2 = readl(&tp->default_qhdr->word1);
-+				busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
-+
-+				printk("frame  status: %d\n"
-+				       "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
-+				       "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
-+				       rx_status,
-+				       GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
-+				       GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
-+			}
- 		}
- 		if (good_frame)
- 		{
- 			if (curr_desc->word0.bits.drop)
- 				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
--//			if (chksum_status)
--//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
- 
- #ifdef SL351x_GMAC_WORKAROUND
- 			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-@@ -4432,225 +3900,118 @@ static int gmac_rx_poll(struct net_devic
- 			}
- 			tp->short_frames_cnt = 0;
- #endif
--	    	/* get frame information from the first descriptor of the frame */
-+			/* get frame information from the first descriptor of the frame */
- 			isPtr->rx_packets++;
--			//consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
-+			consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
- 			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
- 			tp->curr_rx_skb = skb;
--	//		curr_desc->word2.buf_adr = 0;
- 
--		    //skb_reserve (skb, SKB_RESERVE_BYTES);
- 			skb_reserve (skb, RX_INSERT_BYTES);	/* 2 byte align the IP fields. */
--			//if ((skb->tail+pkt_size) > skb->end )
--			//printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
- 			skb_put(skb, pkt_size);
- 
--
- 			skb->dev = dev;
- 			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
- 			{
- 				skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
--				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
--				{
--					struct iphdr	*ip_hdr;
--					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
--					sl351x_nat_input(skb,
--									tp->port_id,
--									(void *)curr_desc->word3.bits.l3_offset,
--								  	(void *)curr_desc->word3.bits.l4_offset);
--				}
--#endif
- 				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--#if 0
--#ifdef CONFIG_SL351x_RXTOE
--				if (storlink_ctl.rx_max_pktsize) {
--					struct iphdr	*ip_hdr;
--					struct tcphdr	*tcp_hdr;
--					int ip_hdrlen;
--
-- 					ip_hdr = (struct iphdr*)&(skb->data[0]);
--					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
--					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
--						ip_hdrlen = ip_hdr->ihl << 2;
--						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
--						if (tcp_hdr->syn) {
--							struct toe_conn* connection = init_toeq(ip_hdr->version,
--									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
--							TCP_SKB_CB(skb)->connection = connection;
--							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
--							//		printk("%s::skb data %x, conn %x, mode %x\n",
--							//			__func__, skb->data, connection, connection->mode);
--						}
--					}
--				}
--#endif
--#endif
- 			}
- 			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
- 			{
- 				skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
--				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
--				{
--					struct iphdr	*ip_hdr;
--					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
--					if (ip_hdr->protocol == IPPROTO_UDP)
--					{
--						sl351x_nat_input(skb,
--										tp->port_id,
--										(void *)curr_desc->word3.bits.l3_offset,
--								  		(void *)curr_desc->word3.bits.l4_offset);
--					}
--					else if (ip_hdr->protocol == IPPROTO_GRE)
--					{
--						sl351x_nat_input(skb,
--									tp->port_id,
--									(void *)curr_desc->word3.bits.l3_offset,
--								  	(void *)curr_desc->word3.bits.l4_offset);
--					}
--				}
--#endif
- 				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
- 			}
- 			else
- 			{
- 				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
- 			}
--			//netif_rx(skb);  /* socket rx */
-+
- 			netif_receive_skb(skb); //For NAPI
- 			dev->last_rx = jiffies;
- 
- 			isPtr->rx_bytes += pkt_size;
--			//printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
--
-+		}
- 
--        }
- 		// advance one for Rx default Q 0/1
- 		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
- 		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
--     	tp->rx_rwptr.bits32 = rwptr.bits32;
-+		tp->rx_rwptr.bits32 = rwptr.bits32;
- 		rx_pkts_num++;
--		//rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
--		//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--		//printk("%s:---Loop  -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
--#if 0
--		if ((status4 & 0x1) == 0)
--		{
--			//if (!((dev->last_rx <= (rx_time + 2)) &&  (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
--			if (tp->total_q_cnt_napi < 1024)
--			{
--				tp->total_q_cnt_napi++;
--				toe_gmac_fill_free_q();  //for iperf test disable
--			}
--			//else
--				//printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
-+		// rwptr.bits32 = readl(&tp->default_qhdr->word1);
- 
-+		status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+		if (status4 & 1) {
-+			writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
- 		}
-+
-+		toe_gmac_fill_free_q(5);
-+	}
-+
-+#if 0
-+	/* avoid races with hard_start_xmit() */
-+
-+	spin_lock(&gmac_fq_lock);
-+	toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-+	spin_unlock(&gmac_fq_lock);
- #endif
--		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
--		//printk("%s:---Loop  -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
--		//printk("%s:---Loop  rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+	if (status4 & 1)
-+	{
-+		writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+		status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+		toe_gmac_fill_free_q(rx_pkts_num);
- 	}
--	// advance one for Rx default Q 0/1
- 
--		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
--		//SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
--     	//tp->rx_rwptr.bits32 = rwptr.bits32;
--     	//rwptr.bits.rptr = rwptr.bits.rptr;
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+	if (rwptr.bits.rptr != rwptr.bits.wptr &&
-+	    quota > rx_pkts_num)
-+		goto rx_poll_retry;
- 
- 	dev->quota -= rx_pkts_num;
- 	*budget -= rx_pkts_num;
- 
--	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
--	//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--	rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
--	//printk("%s:---After    rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
--//	if (rwptr.bits.rptr > rwptr.bits.wptr )
--//			{
--				//toe_gmac_disable_rx(dev);
--				//wait_event_interruptible_timeout(freeq_wait,
--					//(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
--				//printk("\n%s:: return 22222=======> rx_pkts_num =%d,   rwptr.bits.rptr=%d,   rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
--					//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
--//				return 1;
--//			}
--
--	if (rwptr.bits.rptr == rwptr.bits.wptr)
-+	/* Receive queue is empty now */
-+	if (quota >= rx_pkts_num)
- 	{
--		// unsigned int data32;
--			//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr]   rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
--
--	    /* Receive descriptor is empty now */
--#if 1
--     if (status4 & 0x1)
--   			{
--   				do_again =1;
--   				//writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
--   				//toe_gmac_disable_interrupt(tp->irq);
--   				tp->sw_fq_empty_cnt++;
--   				//toe_gmac_disable_rx(dev);
--   				writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
--				writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
--   				//printk("\n%s ::  freeq int-----tp->sw_fq_empty_cnt  =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
--   				//while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
--   				//{
--   					//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
--					//0x1);
--				//printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
--				//if ((status4 & 0x1) == 0)
--					//break;
--				 return 1;
--				//}
-+		unsigned long flags;
- 
-+		netif_rx_complete(dev);
-+		rx_poll_enabled = 0;
-+#if 0
-+		status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+		if (status1 & 1) {
-+			if (netif_rx_reschedule(dev, rx_pkts_num)) {
-+				rx_poll_enabled = 1;
-+				return 1;
- 			}
-+		}
- #endif
--        //toe_gmac_fill_free_q();
--        netif_rx_complete(dev);
--
--		rx_poll_enabled = 0;
- 
--		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--		if (tp->port_id == 0)
--				data32 |= DEFAULT_Q0_INT_BIT;
--		else
--				data32 |= DEFAULT_Q1_INT_BIT;
--		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+		spin_lock_irqsave(&gmac_fq_lock, flags);
- 
- 		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- 		if (tp->port_id == 0)
--				data32 |= DEFAULT_Q0_INT_BIT;
-+			data32 |= DEFAULT_Q0_INT_BIT;
- 		else
--				data32 |= DEFAULT_Q1_INT_BIT;
-+			data32 |= DEFAULT_Q1_INT_BIT;
- 		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- 
--		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 		if (tp->port_id == 0)
--				data32 |= DEFAULT_Q0_INT_BIT;
-+			data32 |= DEFAULT_Q0_INT_BIT;
- 		else
--				data32 |= DEFAULT_Q1_INT_BIT;
--		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+			data32 |= DEFAULT_Q1_INT_BIT;
-+		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 
--        // enable GMAC-0 rx interrupt
--        // class-Q & TOE-Q are implemented in future
--        //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--        //if (tp->port_id == 0)
--        	//data32 |= DEFAULT_Q0_INT_BIT;
--        //else
--        	//data32 |= DEFAULT_Q1_INT_BIT;
--        //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--		writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
--		//printk("\n%s::netif_rx_complete-->  rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
--		//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
--        writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
--		writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
--        return 0;
--    }
--    else
--    {
--        //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x  ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
--        return 1;
--    }
-+		spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+
-+		return 0;
-+	}
-+	else
-+	{
-+		/* not done, will call ->poll() later. */
-+		return 1;
-+	}
- }
- #endif
- 
-@@ -5114,6 +4475,7 @@ void sl351x_poll_gmac_hanged_status(u32 
- 			{
- 				sl351x_nat_workaround_cnt++;
- 				sl351x_nat_workaround_handler();
-+				printk("%():%d - workaround\n", __func__, __LINE__);
- 			}
- #endif
- #endif
-@@ -5124,6 +4486,7 @@ void sl351x_poll_gmac_hanged_status(u32 
- 	}
- 
- do_workaround:
-+	printk("doing workaround ?!\n");
- 
- 	gmac_initialized = 0;
- 	if (hanged_state)
-@@ -5290,6 +4653,7 @@ static void sl351x_gmac_release_swtx_q(v
- 	GMAC_SWTXQ_T	*swtxq;
- 	DMA_RWPTR_T		rwptr;
- 
-+	printk("**** %s():%d\n", __func__, __LINE__);
- 	toe = (TOE_INFO_T *)&toe_private_data;
- 	tp = (GMAC_INFO_T *)&toe->gmac[0];
- 	for (i=0; igmac[0];
- 	for (i=0; iclassq[0];
- 	for (i=0; i
- #include 
- 
-+//****** Storlink SoC ******
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
--
--#define MAX_WORD_RETRIES 3
-+//#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-+#define FORCE_FAST_PROG 0
-+
-+//#define MAX_WORD_RETRIES 3
-+#define MAX_WORD_RETRIES 3 // CONFIG_MTD_CFI_AMDSTD_RETRY
-+//**************************
- 
- #define MANUFACTURER_AMD	0x0001
- #define MANUFACTURER_ATMEL	0x001F
-@@ -322,6 +327,13 @@ struct mtd_info *cfi_cmdset_0002(struct 
- #endif
- 
- 		bootloc = extp->TopBottom;
-+//****** Storlink SoC ******
-+		if(bootloc == 5)
-+		{
-+			bootloc = 3;
-+			extp->TopBottom = 3;
-+		}
-+//**************************
- 		if ((bootloc != 2) && (bootloc != 3)) {
- 			printk(KERN_WARNING "%s: CFI does not contain boot "
- 			       "bank location. Assuming top.\n", map->name);
-@@ -340,6 +352,9 @@ struct mtd_info *cfi_cmdset_0002(struct 
- 				cfi->cfiq->EraseRegionInfo[j] = swap;
- 			}
- 		}
-+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
-+		cfi->device_type = CFI_DEVICETYPE_X8;
-+#endif
- 		/* Set the default CFI lock/unlock addresses */
- 		cfi->addr_unlock1 = 0x555;
- 		cfi->addr_unlock2 = 0x2aa;
-@@ -461,6 +476,7 @@ static int __xipram chip_ready(struct ma
- 	map_word d, t;
- 
- 	d = map_read(map, addr);
-+	udelay(20);	//Storlink SoC
- 	t = map_read(map, addr);
- 
- 	return map_word_equal(map, d, t);
-@@ -626,7 +642,9 @@ static void put_chip(struct map_info *ma
- 	default:
- 		printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
- 	}
-+//****** Storlink SoC ******
- 	wake_up(&chip->wq);
-+//**************************
- }
- 
- #ifdef CONFIG_MTD_XIP
-@@ -940,7 +958,9 @@ static inline int do_read_secsi_onechip(
- 	cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- 
-+//****** Storlink SoC ******
- 	wake_up(&chip->wq);
-+//**************************
- 	spin_unlock(chip->mutex);
- 
- 	return 0;
-@@ -1005,7 +1025,10 @@ static int __xipram do_write_oneword(str
- 	 */
- 	unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
- 	int ret = 0;
--	map_word oldd;
-+//****** Storlink SoC ******
-+//	map_word oldd;
-+	map_word oldd, tmp;
-+//**************************
- 	int retry_cnt = 0;
- 
- 	adr += chip->start;
-@@ -1037,9 +1060,15 @@ static int __xipram do_write_oneword(str
- 	ENABLE_VPP(map);
- 	xip_disable(map, chip, adr);
-  retry:
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG  /* Unlock bypass */
-+	cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+#else
- 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+#endif
-+//**************************
- 	map_write(map, datum, adr);
- 	chip->state = FL_WRITING;
- 
-@@ -1072,7 +1101,13 @@ static int __xipram do_write_oneword(str
- 		}
- 
- 		if (chip_ready(map, adr))
--			break;
-+		{
-+			tmp = map_read(map, adr);
-+			if(map_word_equal(map, tmp, datum))
-+//				goto op_done;
-+                break;
-+
-+		}
- 
- 		/* Latency issues. Drop the lock, wait a while and retry */
- 		UDELAY(map, chip, adr, 1);
-@@ -1084,8 +1119,17 @@ static int __xipram do_write_oneword(str
- 		/* FIXME - should have reset delay before continuing */
- 
- 		if (++retry_cnt <= MAX_WORD_RETRIES)
-+		{
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+			cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+		//udelay(1);
-+#endif
-+			udelay(1);
- 			goto retry;
--
-+		}
- 		ret = -EIO;
- 	}
- 	xip_enable(map, chip, adr);
-@@ -1171,7 +1215,14 @@ static int cfi_amdstd_write_words(struct
- 				return 0;
- 		}
- 	}
--
-+//****** Storlink SoC ******
-+	map_write( map, CMD(0xF0), chipstart );
-+#if FORCE_FAST_PROG
-+		cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
-+//**************************
- 	/* We are now aligned, write as much as possible */
- 	while(len >= map_bankwidth(map)) {
- 		map_word datum;
-@@ -1181,7 +1232,15 @@ static int cfi_amdstd_write_words(struct
- 		ret = do_write_oneword(map, &cfi->chips[chipnum],
- 				       ofs, datum);
- 		if (ret)
-+		{
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+			/* Get out of unlock bypass mode */
-+			cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 			return ret;
-+		}
- 
- 		ofs += map_bankwidth(map);
- 		buf += map_bankwidth(map);
-@@ -1189,19 +1248,38 @@ static int cfi_amdstd_write_words(struct
- 		len -= map_bankwidth(map);
- 
- 		if (ofs >> cfi->chipshift) {
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+			/* Get out of unlock bypass mode */
-+			cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 			chipnum ++;
- 			ofs = 0;
- 			if (chipnum == cfi->numchips)
- 				return 0;
- 			chipstart = cfi->chips[chipnum].start;
-+#if FORCE_FAST_PROG
-+			/* Go into unlock bypass mode for next set of chips */
-+			cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 		}
- 	}
- 
-+#if FORCE_FAST_PROG
-+	/* Get out of unlock bypass mode */
-+	cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+	cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
-+
- 	/* Write the trailing bytes if any */
- 	if (len & (map_bankwidth(map)-1)) {
- 		map_word tmp_buf;
- 
-  retry1:
-+
- 		spin_lock(cfi->chips[chipnum].mutex);
- 
- 		if (cfi->chips[chipnum].state != FL_READY) {
-@@ -1221,7 +1299,11 @@ static int cfi_amdstd_write_words(struct
- #endif
- 			goto retry1;
- 		}
--
-+#if FORCE_FAST_PROG
-+		cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 		tmp_buf = map_read(map, ofs + chipstart);
- 
- 		spin_unlock(cfi->chips[chipnum].mutex);
-@@ -1231,11 +1313,23 @@ static int cfi_amdstd_write_words(struct
- 		ret = do_write_oneword(map, &cfi->chips[chipnum],
- 				ofs, tmp_buf);
- 		if (ret)
-+		{
-+#if FORCE_FAST_PROG
-+	/* Get out of unlock bypass mode */
-+	cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+	cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 			return ret;
--
-+		}
-+#if FORCE_FAST_PROG
-+	/* Get out of unlock bypass mode */
-+	cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+	cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 		(*retlen) += len;
- 	}
- 
-+	map_write( map, CMD(0xF0), chipstart );
- 	return 0;
- }
- 
-@@ -1275,6 +1369,7 @@ static int __xipram do_write_buffer(stru
- 	ENABLE_VPP(map);
- 	xip_disable(map, chip, cmd_adr);
- 
-+	map_write( map, CMD(0xF0), chip->start );	//Storlink
- 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- 	//cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-@@ -1535,6 +1630,9 @@ static int __xipram do_erase_oneblock(st
- 	DECLARE_WAITQUEUE(wait, current);
- 	int ret = 0;
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_lock();				// sl2312 share pin lock
-+#endif
- 	adr += chip->start;
- 
- 	spin_lock(chip->mutex);
-@@ -1613,6 +1711,9 @@ static int __xipram do_erase_oneblock(st
- 	chip->state = FL_READY;
- 	put_chip(map, chip, adr);
- 	spin_unlock(chip->mutex);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 	return ret;
- }
- 
---- /dev/null
-+++ b/drivers/mtd/chips/map_serial.c
-@@ -0,0 +1,188 @@
-+/*
-+ * Common code to handle map devices which are simple ROM
-+ * (C) 2000 Red Hat. GPL'd.
-+ * $Id: map_serial.c,v 1.3 2006/06/05 02:34:54 middle Exp $
-+ */
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include  //add
-+#include 
-+#include 
-+
-+static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr);
-+static int mapserial_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
-+static int mapserial_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+static void mapserial_nop (struct mtd_info *);
-+struct mtd_info *map_serial_probe(struct map_info *map);
-+
-+extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
-+
-+static struct mtd_chip_driver mapserial_chipdrv = {
-+	probe: map_serial_probe,
-+	name: "map_serial",
-+	module: THIS_MODULE
-+};
-+
-+struct mtd_info *map_serial_probe(struct map_info *map)
-+{
-+	struct mtd_info *mtd;
-+
-+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
-+	if (!mtd)
-+		return NULL;
-+
-+	memset(mtd, 0, sizeof(*mtd));
-+
-+	map->fldrv = &mapserial_chipdrv;
-+	mtd->priv = map;
-+	mtd->name = map->name;
-+	mtd->type = MTD_OTHER;
-+	mtd->erase = mapserial_erase;
-+	mtd->size = map->size;
-+	mtd->read = mapserial_read;
-+	mtd->write = mapserial_write;
-+	mtd->sync = mapserial_nop;
-+	mtd->flags = (MTD_WRITEABLE|MTD_ERASEABLE);
-+//	mtd->erasesize = 512; // page size;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+	mtd->erasesize = M25P80_SECTOR_SIZE; // block size;
-+#else
-+	mtd->erasesize = 0x1000; // block size;
-+#endif
-+
-+	__module_get(THIS_MODULE);
-+	//MOD_INC_USE_COUNT;
-+	return mtd;
-+}
-+
-+#define	FLASH_ACCESS_OFFSET	        		0x00000010
-+#define	FLASH_ADDRESS_OFFSET            		0x00000014
-+#define	FLASH_WRITE_DATA_OFFSET         		0x00000018
-+#define	FLASH_READ_DATA_OFFSET          		0x00000018
-+
-+static __u32 readflash_ctrl_reg(__u32 ofs)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    return __raw_readl(base);
-+}
-+
-+static void writeflash_ctrl_reg(__u32 data, __u32 ofs)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    __raw_writel(data, base);
-+}
-+
-+static int mapserial_erase_block(struct map_info *map,unsigned int block)
-+{
-+
-+	__u32 address;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+
-+	if(!m25p80_sector_erase(block, 0))
-+		return (MTD_ERASE_DONE);
-+#else
-+      __u32 opcode;
-+      __u32 count=0;
-+//      __u8  status;
-+
-+ //     printk("mapserial_erase_block : erase block %d \n",block);
-+//      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd;
-+      opcode = 0x80000000 | 0x0200 | 0x50;
-+      address = (block << 13);
-+      writeflash_ctrl_reg(address,FLASH_ADDRESS_OFFSET);
-+      writeflash_ctrl_reg(opcode,FLASH_ACCESS_OFFSET);
-+      opcode=readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(opcode&0x80000000)
-+      {
-+          opcode = readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          count++;
-+          if (count > 10000)
-+          {
-+            return (MTD_ERASE_FAILED);
-+          }
-+      }
-+      return (MTD_ERASE_DONE);
-+#endif
-+}
-+
-+static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct map_info *map = (struct map_info *)mtd->priv;
-+    unsigned int    addr;
-+    int             len;
-+    unsigned int    block;
-+    unsigned int    ret=0;
-+
-+	addr = instr->addr;
-+	len = instr->len;
-+    while (len > 0)
-+    {
-+        block = addr / mtd->erasesize;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+        ret = mapserial_erase_block(map,addr);
-+#else
-+		ret = mapserial_erase_block(map,block);
-+#endif
-+        addr = addr + mtd->erasesize;
-+        len = len - mtd->erasesize;
-+    }
-+    return (ret);
-+}
-+
-+static int mapserial_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+	struct map_info *map = (struct map_info *)mtd->priv;
-+//        printk("mapserial_read : \n");
-+	map->copy_from(map, buf, from, len);
-+	*retlen = len;
-+	return 0;
-+}
-+
-+static void mapserial_nop(struct mtd_info *mtd)
-+{
-+	/* Nothing to see here */
-+}
-+
-+static int mapserial_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+	struct map_info *map = (struct map_info *)mtd->priv;
-+//	printk("mapserial_write : buf %x to %x len %x \n",(int)buf, (int)to, (int)len);
-+	//map->copy_to(map, buf, to, len);
-+	map->copy_to(map, to, buf, len);
-+	*retlen = len;
-+	return 0;
-+}
-+
-+int __init map_serial_init(void)
-+{
-+	register_mtd_chip_driver(&mapserial_chipdrv);
-+	return 0;
-+}
-+
-+static void __exit map_serial_exit(void)
-+{
-+	unregister_mtd_chip_driver(&mapserial_chipdrv);
-+}
-+
-+module_init(map_serial_init);
-+module_exit(map_serial_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("David Woodhouse ");
-+MODULE_DESCRIPTION("MTD chip driver for ROM chips");
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -614,5 +614,30 @@ config MTD_PLATRAM
- 
- 	  This selection automatically selects the map_ram driver.
- 
-+#***************************************************************************************
-+# Storlink parallel/Serial Flash configuration
-+#***************************************************************************************
-+config MTD_SL2312_CFI
-+        tristate "CFI Flash device mapped on SL2312"
-+        depends on MTD_CFI
-+        help
-+          Map driver for SL2312 demo board.
-+
-+config MTD_SL2312_SERIAL_ATMEL
-+        tristate "ATMEL Serial Flash device mapped on SL2312"
-+        depends on MTD_PARTITIONS && ARCH_SL2312
-+        help
-+          Map driver for SL2312 demo board.
-+
-+config MTD_SL2312_SERIAL_ST
-+        tristate "ST Serial Flash device mapped on SL2312"
-+        depends on MTD_PARTITIONS && ARCH_SL2312
-+        help
-+          Map driver for SL2312 demo board.
-+
-+config SL2312_SHARE_PIN
-+        tristate "Parallel Flash share pin on SL2312 ASIC"
-+        depends on SL3516_ASIC
-+
- endmenu
- 
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-atmel.c
-@@ -0,0 +1,554 @@
-+/*
-+ * $Id: sl2312-flash-atmel.c,v 1.2 2006/06/05 02:35:57 middle Exp $
-+ *
-+ * Flash and EPROM on Hitachi Solution Engine and similar boards.
-+ *
-+ * (C) 2001 Red Hat, Inc.
-+ *
-+ * GPL'd
-+ */
-+
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include  //add
-+
-+
-+#define  g_page_addr  AT45DB321_PAGE_SHIFT    //321 : shift 10  ; 642 : shift 11
-+#define  g_chipen     SERIAL_FLASH_CHIP0_EN   //atmel
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+void address_to_page(__u32 address, __u16 *page, __u16 *offset)
-+{
-+    *page = address / SPAGE_SIZE;
-+    *offset = address % SPAGE_SIZE;
-+}
-+
-+static __u32 read_flash_ctrl_reg(__u32 ofs)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    return __raw_readl(base);
-+}
-+
-+static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    __raw_writel(data, base);
-+}
-+
-+void atmel_read_status(__u8 cmd, __u8 *data)
-+{
-+      __u32 opcode;
-+      __u32 value;
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | cmd | g_chipen;
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(opcode&0x80000000)
-+      {
-+          opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+
-+      value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      *data = value & 0xff;
-+}
-+
-+void main_memory_page_read(__u8 cmd, __u16 page, __u16 offset, __u8 *data)
-+{
-+      __u32 opcode;
-+      __u32 address;
-+      __u32 value;
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA | cmd | g_chipen;
-+      address = (page << g_page_addr) + offset;
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(opcode&0x80000000)
-+      {
-+          opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+
-+      value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      *data = value & 0xff;
-+}
-+
-+void buffer_to_main_memory(__u8 cmd, __u16 page)
-+{
-+      __u32 opcode;
-+      __u32 address;
-+      __u8  status;
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+      address = (page << g_page_addr);
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(opcode&0x80000000)
-+      {
-+          opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+      atmel_read_status(READ_STATUS_SPI, &status);
-+      while(!(status&0x80))
-+      {
-+          atmel_read_status(READ_STATUS_SPI, &status);
-+          flash_delay();
-+          schedule();
-+      }
-+
-+}
-+
-+
-+void atmel_flash_read_page(__u32 address, __u8 *buffer, __u32 len)
-+{
-+    __u8  byte;
-+    __u16 page, offset;
-+    __u16 i;
-+
-+    address_to_page(address, &page, &offset);
-+
-+     for(i=0; i> 8;
-+//printk("sl2312_write32:: address = %08x  data = %c \n",ofs,byte);
-+    }
-+#else
-+      write_flash_ctrl_reg(ofs, d);
-+#endif
-+}
-+
-+void sl2312_write8(struct map_info *map, __u8 d, unsigned long ofs)
-+{
-+     __u16 page, offset;
-+
-+     address_to_page(ofs, &page, &offset);
-+     main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, d);
-+//printk("sl2312_write8:: address = %08x  data = %c \n",ofs,d);
-+
-+}
-+
-+void sl2312_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
-+{
-+     __u32 size;
-+     __u8  *buffer;
-+     __u32 length;//i, j,
-+
-+     //printk("sl2312_copy_from:: address = %08x  datalen = %d \n",ofs,len);
-+
-+     length = len;
-+     buffer = (__u8 *)buf;
-+     while(len)
-+     {
-+        size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
-+        if(size > len)
-+            size = len;
-+        atmel_flash_read_page(ofs, buffer, size);
-+        buffer+=size;
-+        ofs+=size;
-+        len -= size;
-+     }
-+
-+#if 0
-+        buffer = (__u8 *)buf;
-+        for(i=0; i len)
-+            size = len;
-+        atmel_flash_program_page(ofs, buffer, size);
-+        buffer+=size;
-+        ofs+=size;
-+	len-=size;
-+    }
-+
-+
-+}
-+
-+
-+static struct mtd_info *serial_mtd;
-+
-+static struct mtd_partition *parsed_parts;
-+
-+static struct map_info sl2312_serial_map = {
-+//	name: "SL2312 serial flash",
-+//	size: 4194304, //0x400000,
-+//		//buswidth: 4,
-+//	bankwidth: 4,
-+//	phys:		 SL2312_FLASH_BASE,
-+//#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+//	//read32: sl2312_read32,
-+//	//read8: sl2312_read8,
-+//	copy_from: sl2312_copy_from,
-+//	//write8: sl2312_write8,
-+//	//write32: sl2312_write32,
-+//	read: sl2312_read32,
-+//	write: sl2312_write32,
-+//	copy_to: sl2312_copy_to
-+//#endif
-+	.name = "SL2312 serial flash",
-+	.size = 4194304, //0x400000,
-+		//buswidth: 4,
-+	.bankwidth = 4,
-+	.phys =		 SL2312_FLASH_BASE,
-+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+	//read32: sl2312_read32,
-+	//read8: sl2312_read8,
-+	.copy_from = sl2312_copy_from,
-+	//write8: sl2312_write8,
-+	//write32: sl2312_write32,
-+	.read = sl2312_read32,
-+	.write = sl2312_write32,
-+	.copy_to = sl2312_copy_to
-+#endif
-+};
-+
-+
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+
-+
-+	///* boot code */
-+	//{ name: "bootloader", offset: 0x00000000, size: 0x20000, },
-+	///* kernel image */
-+	//{ name: "kerel image", offset: 0x000020000, size: 0x2E0000 },
-+	///* All else is writable (e.g. JFFS) */
-+	//{ name: "user data", offset: 0x00300000, size: 0x00100000, },
-+	/* boot code */
-+	{ .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
-+	/* kernel image */
-+	{ .name = "kerel image", .offset = 0x000020000, .size = 0xE0000 },
-+	/* All else is writable (e.g. JFFS) */
-+	{ .name = "user data", .offset = 0x00100000, .size = 0x00300000, },
-+
-+
-+};
-+
-+
-+
-+static int __init init_sl2312_maps(void)
-+{
-+	int nr_parts = 0;
-+	struct mtd_partition *parts;
-+
-+	serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+	if (!serial_mtd)
-+		return NULL;
-+
-+	memset(serial_mtd, 0, sizeof(struct mtd_info));
-+	//sl2312flash_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+    //sl2312_serial_map.map_priv_1 = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)FLASH_VBASE;
-+    sl2312_serial_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
-+    if (!sl2312_serial_map.virt) {
-+		printk(" failed to ioremap \n");
-+		return -EIO;
-+	}
-+	serial_mtd = do_map_probe("map_serial", &sl2312_serial_map);
-+	if (serial_mtd) {
-+		//serial_mtd->module = THIS_MODULE;
-+		serial_mtd->owner = THIS_MODULE;
-+
-+	}
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+	nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
-+	if (nr_parts > 0)
-+		printk(KERN_NOTICE "Found RedBoot partition table.\n");
-+	else if (nr_parts < 0)
-+		printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
-+#else
-+	parsed_parts = sl2312_partitions;
-+	parts = sl2312_partitions;
-+	nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+	nr_parts = sizeof(sl2312_partitions)/sizeof(*parsed_parts);
-+#endif /* CONFIG_MTD_REDBOOT_PARTS */
-+
-+	if (nr_parts > 0)
-+	    add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
-+	else
-+	    add_mtd_device(serial_mtd);
-+
-+	return 0;
-+}
-+
-+static void __exit cleanup_sl2312_maps(void)
-+{
-+	if (parsed_parts)
-+	    del_mtd_partitions(serial_mtd);
-+	else
-+	    del_mtd_device(serial_mtd);
-+
-+	map_destroy(serial_mtd);
-+
-+
-+}
-+
-+module_init(init_sl2312_maps);
-+module_exit(cleanup_sl2312_maps);
-+
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Plus Chen ");
-+MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
-+
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-cfi.c
-@@ -0,0 +1,370 @@
-+/*======================================================================
-+
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+======================================================================*/
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "sl2312_flashmap.h"
-+
-+
-+//extern int parse_afs_partitions(struct mtd_info *, struct mtd_partition **);
-+
-+/* the base address of FLASH control register */
-+#define FLASH_CONTROL_BASE_ADDR	    (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
-+#define SL2312_GLOBAL_BASE_ADDR     (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+/* define read/write register utility */
-+#define FLASH_READ_REG(offset)			(__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
-+#define FLASH_WRITE_REG(offset,val) 	(__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
-+
-+/* the offset of FLASH control register */
-+enum EMAC_REGISTER {
-+	FLASH_ID     	= 0x0000,
-+	FLASH_STATUS 	= 0x0008,
-+	FLASH_TYPE   	= 0x000c,
-+	FLASH_ACCESS	= 0x0020,
-+	FLASH_ADDRESS   = 0x0024,
-+	FLASH_DATA		= 0x0028,
-+	FLASH_TIMING    = 0x002c,
-+};
-+
-+//#define FLASH_BASE	FLASH_CONTROL_BASE_ADDR
-+//#define FLASH_SIZE	0x00800000 //INTEGRATOR_FLASH_SIZE
-+
-+//#define FLASH_PART_SIZE 8388608
-+
-+static unsigned int flash_indirect_access = 0;
-+
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+static unsigned int chip_en = 0x00000000;
-+
-+void sl2312flash_enable_parallel_flash(void)
-+{
-+    unsigned int    reg_val;
-+
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val & 0xfffffffd;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    return;
-+}
-+
-+void sl2312flash_disable_parallel_flash(void)
-+{
-+    unsigned int    reg_val;
-+
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val | 0x00000002;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    return;
-+}
-+#endif
-+
-+
-+static struct map_info sl2312flash_map =
-+{
-+	name:		"SL2312 CFI Flash",
-+	size:       FLASH_SIZE,
-+	bankwidth:   2,
-+	//bankwidth:   1, //for 8 bits width
-+    phys:       SL2312_FLASH_BASE,
-+};
-+
-+static struct mtd_info *mtd;
-+#if 0
-+static struct mtd_partition sl2312_partitions[] = {
-+	/* boot code */
-+	{
-+		name: "bootloader",
-+		offset: 0x00000000,
-+		size: 0x20000,
-+//		mask_flags: MTD_WRITEABLE,
-+	},
-+	/* kernel image */
-+	{
-+		name: "kerel image",
-+		offset: 0x00020000,
-+		size: 0x2E0000
-+	},
-+	/* All else is writable (e.g. JFFS) */
-+	{
-+		name: "user data",
-+		offset: 0x00300000,
-+		size: 0x00100000,
-+	}
-+};
-+#endif
-+
-+
-+
-+static int __init sl2312flash_init(void)
-+{
-+	struct mtd_partition *parts;
-+	int nr_parts = 0;
-+	int ret;
-+#ifndef CONFIG_SL2312_SHARE_PIN
-+    unsigned int    reg_val;
-+#endif
-+
-+    printk("SL2312 MTD Driver Init.......\n");
-+
-+#ifndef CONFIG_SL2312_SHARE_PIN
-+	/* enable flash */
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val & 0xfffffffd;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+#else
-+    sl2312flash_enable_parallel_flash();      /* enable Parallel FLASH */
-+#endif
-+    FLASH_WRITE_REG(FLASH_ACCESS,0x00004000); /* parallel flash direct access mode */
-+    ret = FLASH_READ_REG(FLASH_ACCESS);
-+    if (ret == 0x00004000)
-+    {
-+        flash_indirect_access = 0;  /* parallel flash direct access */
-+    }
-+    else
-+    {
-+        flash_indirect_access = 1;  /* parallel flash indirect access */
-+    }
-+
-+	/*
-+	 * Also, the CFI layer automatically works out what size
-+	 * of chips we have, and does the necessary identification
-+	 * for us automatically.
-+	 */
-+#ifdef CONFIG_GEMINI_IPI
-+	sl2312flash_map.virt = FLASH_VBASE;//(unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+#else
-+	sl2312flash_map.virt = (unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+#endif
-+	//printk("sl2312flash_map.virt  = %08x\n",(unsigned int)sl2312flash_map.virt);
-+
-+//	simple_map_init(&sl2312flash_map);
-+
-+	mtd = do_map_probe("cfi_probe", &sl2312flash_map);
-+	if (!mtd)
-+	{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+        sl2312flash_disable_parallel_flash();      /* disable Parallel FLASH */
-+#endif
-+		return -ENXIO;
-+	}
-+	mtd->owner = THIS_MODULE;
-+//    mtd->erase = flash_erase;
-+//    mtd->read = flash_read;
-+//    mtd->write = flash_write;
-+
-+    parts = sl2312_partitions;
-+	nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+	ret = add_mtd_partitions(mtd, parts, nr_parts);
-+	/*If we got an error, free all resources.*/
-+	if (ret < 0) {
-+		del_mtd_partitions(mtd);
-+		map_destroy(mtd);
-+	}
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+    sl2312flash_disable_parallel_flash();      /* disable Parallel FLASH */
-+#endif
-+    printk("SL2312 MTD Driver Init Success ......\n");
-+	return ret;
-+}
-+
-+static void __exit sl2312flash_exit(void)
-+{
-+	if (mtd) {
-+		del_mtd_partitions(mtd);
-+		map_destroy(mtd);
-+	}
-+
-+	if (sl2312flash_map.virt) {
-+	    iounmap((void *)sl2312flash_map.virt);
-+	    sl2312flash_map.virt = 0;
-+	}
-+}
-+
-+char chrtohex(char c)
-+{
-+  char val;
-+  if ((c >= '0') && (c <= '9'))
-+  {
-+    val = c - '0';
-+    return val;
-+  }
-+  else if ((c >= 'a') && (c <= 'f'))
-+  {
-+    val = 10 + (c - 'a');
-+    return val;
-+  }
-+  else if ((c >= 'A') && (c <= 'F'))
-+  {
-+    val = 10 + (c - 'A');
-+    return val;
-+  }
-+  printk("<1>Error number\n");
-+  return 0;
-+}
-+
-+
-+int get_vlaninfo(vlaninfo* vlan)
-+{
-+	vctl_mheader head;
-+	vctl_entry entry;
-+	struct mtd_info *mymtd=NULL;
-+	int i, j, loc = 0;
-+	char *payload=0, *tmp1, *tmp2, tmp3[9];
-+	size_t retlen;
-+
-+	#ifdef CONFIG_SL2312_SHARE_PIN
-+	sl2312flash_enable_parallel_flash();
-+	#endif
-+	for(i=0;iname: %s\n", mymtd->name);
-+		if(mymtd && !strcmp(mymtd->name,"VCTL"))
-+		{
-+			//      printk("%s\n", mymtd->name);
-+			break;
-+		}
-+	}
-+	if( i >= MAX_MTD_DEVICES)
-+	{
-+		printk("Can't find version control\n");
-+		#ifdef CONFIG_SL2312_SHARE_PIN
-+		sl2312flash_disable_parallel_flash();
-+		#endif
-+		return 0;
-+	}
-+
-+	if (!mymtd | !mymtd->read)
-+	{
-+		printk("<1>Can't read Version Configuration\n");
-+		#ifdef CONFIG_SL2312_SHARE_PIN
-+		sl2312flash_disable_parallel_flash();
-+		#endif
-+		return 0;
-+	}
-+
-+	mymtd->read(mymtd, 0, VCTL_HEAD_SIZE, &retlen, (u_char*)&head);
-+	//  printk("entry header: %c%c%c%c\n", head.header[0], head.header[1], head.header[2], head.header[3]);
-+	//  printk("entry number: %x\n", head.entry_num);
-+	if ( strncmp(head.header, "FLFM", 4) )
-+	{
-+		printk("VCTL is a erase block\n");
-+		#ifdef CONFIG_SL2312_SHARE_PIN
-+		sl2312flash_disable_parallel_flash();
-+		#endif
-+		return 0;
-+	}
-+	loc += retlen;
-+	for (i = 0; i < head.entry_num; i++)
-+	{
-+		mymtd->read(mymtd, loc, VCTL_ENTRY_LEN, &retlen, (u_char*)&entry);
-+		//    printk("type: %x\n", entry.type);
-+		//    printk("size: %x\n", entry.size);
-+		strncpy(tmp3, entry.header, 4);
-+		if (entry.type == VCT_VLAN)
-+		{
-+			for (j = 0; j < 6 ; j++)
-+			{
-+				vlan[0].mac[j] = 0;
-+				vlan[1].mac[j] = 0;
-+			}
-+			vlan[0].vlanid = 1;
-+			vlan[1].vlanid = 2;
-+			vlan[0].vlanmap = 0x7F;
-+			vlan[1].vlanmap = 0x80;
-+
-+			payload = (char *)kmalloc(entry.size - VCTL_ENTRY_LEN, GFP_KERNEL);
-+			loc += VCTL_ENTRY_LEN;
-+			mymtd->read(mymtd, loc, entry.size - VCTL_ENTRY_LEN, &retlen, payload);
-+			//      printk("%s\n", payload);
-+			tmp1 = strstr(payload, "MAC1:");
-+			tmp2 = strstr(payload, "MAC2:");
-+			if(!tmp1||!tmp2){
-+				kfree(payload);
-+				#ifdef CONFIG_SL2312_SHARE_PIN
-+				sl2312flash_disable_parallel_flash();
-+				#endif
-+				printk("Error VCTL format!!\n");
-+				return 0;
-+			}
-+			tmp1 += 7;
-+			tmp2 += 7;
-+
-+
-+			for (j = 0; j < 6; j++)
-+			{
-+				vlan[0].mac[j] = chrtohex(tmp1[2*j])*16 + chrtohex(tmp1[(2*j)+1]);
-+				vlan[1].mac[j] = chrtohex(tmp2[2*j])*16 + chrtohex(tmp2[(2*j)+1]);
-+			}
-+			tmp1 = strstr(payload, "ID1:");
-+			tmp2 = strstr(payload, "ID2:");
-+			tmp1 += 4;
-+			tmp2 += 4;
-+			vlan[0].vlanid = tmp1[0] - '0';
-+			vlan[1].vlanid = tmp2[0] - '0';
-+			tmp1 = strstr(payload, "MAP1:");
-+			tmp2 = strstr(payload, "MAP2:");
-+			tmp1 += 7;
-+			tmp2 += 7;
-+			vlan[0].vlanmap = chrtohex(tmp1[0]) * 16 + chrtohex(tmp1[1]);
-+			vlan[1].vlanmap = chrtohex(tmp2[0]) * 16 + chrtohex(tmp2[1]);
-+			//  printk("Vlan1 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[0].vlanid, vlan[0].vlanmap, vlan[0].mac[0], vlan[0].mac[1], vlan[0].mac[2], vlan[0].mac[3], vlan[0].mac[4], vlan[0].mac[5]);
-+			//  printk("Vlan2 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[1].vlanid, vlan[1].vlanmap, vlan[1].mac[0], vlan[1].mac[1], vlan[1].mac[2], vlan[1].mac[3], vlan[1].mac[4], vlan[1].mac[5]);
-+			break;
-+		}
-+		loc += entry.size;
-+	}
-+	if ( entry.type == VCT_VLAN )
-+	{
-+		#ifdef CONFIG_SL2312_SHARE_PIN
-+		sl2312flash_disable_parallel_flash();
-+		#endif
-+		kfree(payload);
-+		return 1;
-+	}
-+	if (i >= head.entry_num)
-+	printk("Can't find vlan information\n");
-+	#ifdef CONFIG_SL2312_SHARE_PIN
-+	sl2312flash_disable_parallel_flash();
-+	#endif
-+	return 0;
-+}
-+
-+EXPORT_SYMBOL(get_vlaninfo);
-+
-+
-+module_init(sl2312flash_init);
-+module_exit(sl2312flash_exit);
-+
-+MODULE_AUTHOR("Storlink Ltd");
-+MODULE_DESCRIPTION("CFI map driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-m25p80.c
-@@ -0,0 +1,498 @@
-+/*
-+ * $Id: sl2312-flash-m25p80.c,v 1.2 2006/06/02 08:46:02 middle Exp $
-+ *
-+ * Flash and EPROM on Hitachi Solution Engine and similar boards.
-+ *
-+ * (C) 2001 Red Hat, Inc.
-+ *
-+ * GPL'd
-+ */
-+
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include  //add
-+#define  g_chipen     SERIAL_FLASH_CHIP0_EN   //ST
-+
-+//static int m25p80_page_program(__u32 address, __u8 data, __u32 schip_en);
-+static void m25p80_write_cmd(__u8 cmd, __u32 schip_en);
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+
-+static __u32 read_flash_ctrl_reg(__u32 ofs)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    return __raw_readl(base);
-+}
-+
-+static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    __raw_writel(data, base);
-+}
-+
-+static void m25p80_read(__u32 address, __u8 *data, __u32 schip_en)
-+{
-+      __u32 opcode,status;
-+      __u32 value;
-+
-+      //opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ;
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_READ;
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+
-+      	opcode|=g_chipen;
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(status&0x80000000)
-+      {
-+          status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+
-+      value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      *data = value & 0xff;
-+}
-+
-+static int m25p80_page_program(__u32 address, __u8 *data, __u32 schip_en)
-+{
-+      __u32 opcode;
-+      __u32  status;
-+	  __u32 tmp;
-+	  int res = FLASH_ERR_OK;
-+	  //volatile FLASH_DATA_T* data_ptr = (volatile FLASH_DATA_T*) data;
-+	  opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+      	      opcode|=g_chipen;
-+
-+          write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+          tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+          //middle delay_ms(130);
-+          status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+          if((status&0x02)==0x02)
-+      	  {
-+      	       //middle delay_ms(100);
-+               m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+          }
-+
-+
-+      m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
-+      ////middle delay_ms(10);
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_PAGE_PROGRAM;
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+      write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, *data);
-+
-+      //status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //while(status!=data)
-+      //{
-+      //    status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //    //middle delay_ms(10);
-+      //}
-+
-+      	opcode|=g_chipen;
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+      //opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+      	opcode|=g_chipen;
-+
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+      status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //while(status&0xfd)
-+      while(status&0x01)
-+      {
-+      	  //if((status&0x9c)!=0)
-+      	  //	printf("  m25p80_page_program	Protect Status = %x\n",status);
-+      	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+          status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+          flash_delay();
-+          schedule();
-+          //middle delay_ms(50);
-+      }
-+      //printf("status = %x, data = %x\n",status,data);
-+      if((status&0x02)==0x02)
-+      {
-+	  //middle delay_ms(100);
-+          m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+      }
-+    //};//while (len > 0)
-+    return res;
-+}
-+
-+void m25p80_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
-+{
-+//     __u32 size;
-+     __u8  *buffer;
-+     __u32 length;//i, j,
-+
-+	length = len;
-+     buffer = (__u8 *)buf;
-+     while(len)
-+     {
-+        m25p80_read(ofs, buffer, g_chipen);
-+        buffer++;
-+        ofs++;
-+        len --;
-+     }	;
-+
-+}
-+
-+__u32 m25p80_read32(struct map_info *map, unsigned long ofs)
-+{
-+
-+      return read_flash_ctrl_reg(ofs);
-+
-+
-+}
-+
-+void m25p80_write32(struct map_info *map, __u32 d, unsigned long ofs)
-+{
-+
-+      write_flash_ctrl_reg(ofs, d);
-+
-+}
-+
-+void m25p80_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
-+{
-+     __u32 size, i, ret;
-+
-+     while(len > 0)
-+     {
-+        if(len >= M25P80_PAGE_SIZE)
-+			size = M25P80_PAGE_SIZE;
-+		else
-+			size = len;
-+
-+        for(i=0;im25p80_sector_erase");
-+	if(address >= FLASH_START)
-+		address-=FLASH_START;
-+
-+      m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
-+      //printf("\n     m25p80_sector_erase : after we-en");
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | M25P80_SECTOR_ERASE;
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+      #ifdef MIDWAY_DIAG
-+      	opcode|=schip_en;
-+      #endif
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+      #ifdef MIDWAY_DIAG
-+      	opcode|=schip_en;
-+      #endif
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+      status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //while(status&0xfd)
-+      while(status&0x01)
-+      {
-+      	  //if((status&0x9c)!=0)
-+      	  //	printf("  m25p80_sector_erase	Protect Status = %x\n",status);
-+      	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+          status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+          flash_delay();
-+          schedule();
-+          //middle delay_ms(50);
-+      }
-+      if((status&0x02)==0x02)
-+      {
-+      	  //middle delay_ms(100);
-+          m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+      }
-+      //printf("\n<--m25p80_sector_erase");
-+      return res;
-+}
-+
-+static void m25p80_write_cmd(__u8 cmd, __u32 schip_en)
-+{
-+      __u32 opcode,tmp;
-+      __u32  status;
-+
-+
-+
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE | cmd;
-+
-+      	opcode|=g_chipen;
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(tmp&0x80000000)
-+      {
-+          tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+      //////
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+      	opcode|=g_chipen;
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(tmp&0x80000000)
-+      {
-+          tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+      //middle delay_ms(130);
-+      status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //printf("\ncmd =%x  status = %x",cmd,status);
-+      if(cmd==M25P80_WRITE_ENABLE)
-+      {
-+      	//printf("\n**-->enable**  status = %x",status);
-+      	//middle delay_ms(100);
-+      	   while((status&0x03) != 2)
-+      	   {
-+      	   	//if((status&0x9c)!=0)
-+      	  	//    printf("	M25P80_WRITE_ENABLE   Protect Status = %x\n",status);
-+
-+      	   	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	   	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    //flash_delay();
-+      			}
-+      	       status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      	       //printf("\n**enable**  status = %x",status);
-+      	       flash_delay();
-+      	       schedule();
-+      	       //middle delay_ms(100);
-+      	   }
-+      }
-+      else if(cmd==M25P80_WRITE_DISABLE)
-+      {
-+      	   //while((status&0x03) == 2)
-+      	   //   printf("\n**disable**  status = %x",status);
-+      	   //middle delay_ms(100);
-+      	   while((status&0x03) != 0)
-+      	   {
-+	       //m25p80_write_status((status&0xfd),schip_en);
-+      	       write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	       tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      		while(tmp&0x80000000)
-+      		{
-+      		    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      		    flash_delay();
-+      		    schedule();
-+      		}
-+      	       status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      	       //printf("\n**disable**  status = %x",status);
-+      	       flash_delay();
-+      	       schedule();
-+      	       //middle delay_ms(50);
-+      	   }
-+      }
-+      else
-+      {
-+      	   //while((status&0x01) !=0)
-+      	   while((status&0x01) !=0)
-+      	   {
-+      	   	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	   	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+      	       status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      	       flash_delay();
-+      	       schedule();
-+      	       //middle delay_ms(50);
-+      	   }
-+      }
-+      //////
-+
-+      //printf("\n<--  status = %x",status);
-+}
-+
-+static int __init init_sl2312_m25p80(void)
-+{
-+	int nr_parts = 0;
-+	struct mtd_partition *parts;
-+
-+	serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+	if (!serial_mtd)
-+		return NULL;
-+
-+	memset(serial_mtd, 0, sizeof(struct mtd_info));
-+	m25p80_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
-+    if (!m25p80_map.virt) {
-+		printk(" failed to ioremap \n");
-+		return -EIO;
-+	}
-+	serial_mtd = do_map_probe("map_serial", &m25p80_map);
-+	if (serial_mtd) {
-+		serial_mtd->owner = THIS_MODULE;
-+
-+	}
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+	nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
-+	if (nr_parts > 0)
-+		printk(KERN_NOTICE "Found RedBoot partition table.\n");
-+	else if (nr_parts < 0)
-+		printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
-+#else
-+	parsed_parts = m25p80_partitions;
-+	parts = m25p80_partitions;
-+	nr_parts = sizeof(m25p80_partitions)/sizeof(*parts);
-+	nr_parts = sizeof(m25p80_partitions)/sizeof(*parsed_parts);
-+#endif /* CONFIG_MTD_REDBOOT_PARTS */
-+
-+	if (nr_parts > 0)
-+	    add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
-+	else
-+	    add_mtd_device(serial_mtd);
-+
-+	return 0;
-+}
-+
-+static void __exit cleanup_sl2312_m25p80(void)
-+{
-+	if (parsed_parts)
-+	    del_mtd_partitions(serial_mtd);
-+	else
-+	    del_mtd_device(serial_mtd);
-+
-+	map_destroy(serial_mtd);
-+
-+
-+}
-+
-+module_init(init_sl2312_m25p80);
-+module_exit(cleanup_sl2312_m25p80);
-+
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Plus Chen ");
-+MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
-+
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h
-@@ -0,0 +1,20 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them.  If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ *  - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+	{ name: "RedBoot", 	 offset: 0x00000000, size: 0x00020000, },
-+	{ name: "kernel", 	 offset: 0x00020000, size: 0x00100000, },
-+	{ name: "rootfs", 	 offset: 0x00120000, size: 0x006A0000, },
-+	{ name: "VCTL", 	 offset: 0x007C0000, size: 0x00010000, },
-+	{ name: "cfg", 	 	 offset: 0x007D0000, size: 0x00020000, },
-+	{ name: "FIS directory", offset: 0x007F0000, size: 0x00010000, }
-+};
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h.16MB
-@@ -0,0 +1,21 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them.  If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ *  - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+	{ name: "RedBoot",     	 offset: 0x00000000, size: 0x00020000, },
-+	{ name: "Kernel",      	 offset: 0x00020000, size: 0x00300000, },
-+	{ name: "Ramdisk",     	 offset: 0x00320000, size: 0x00600000, },
-+	{ name: "Application", 	 offset: 0x00920000, size: 0x00600000, },
-+	{ name: "VCTL", 	 offset: 0x00F20000, size: 0x00020000, },
-+	{ name: "CurConf", 	 offset: 0x00F40000, size: 0x000A0000, },
-+	{ name: "FIS directory", offset: 0x00FE0000, size: 0x00020000, }
-+};
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h.8MB
-@@ -0,0 +1,21 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them.  If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ *  - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+	{ name: "RedBoot", 	 offset: 0x00000000, size: 0x00020000, },
-+	{ name: "Kernel", 	 offset: 0x00020000, size: 0x00200000, },
-+	{ name: "Ramdisk", 	 offset: 0x00220000, size: 0x00280000, },
-+	{ name: "Application", 	 offset: 0x004A0000, size: 0x00300000, },
-+	{ name: "VCTL", 	 offset: 0x007A0000, size: 0x00020000, },
-+	{ name: "CurConf", 	 offset: 0x007C0000, size: 0x00020000, },
-+	{ name: "FIS directory", offset: 0x007E0000, size: 0x00020000, }
-+};
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -59,6 +59,77 @@ struct mtd_file_info {
- 	enum mtd_file_modes mode;
- };
- 
-+/***********************************************************************
-+/*             Storlink SoC -- flash
-+/***********************************************************************/
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+unsigned int share_pin_flag=0;		// bit0:FLASH, bit1:UART, bit2:EMAC, bit3-4:IDE
-+unsigned int check_sleep_flag=0;	// bit0:FLASH, bit1:IDE
-+static spinlock_t sl2312_flash_lock = SPIN_LOCK_UNLOCKED;
-+EXPORT_SYMBOL(share_pin_flag);
-+int dbg=0;
-+DECLARE_WAIT_QUEUE_HEAD(wq);
-+extern struct wait_queue_head_t *flash_wait;
-+unsigned int flash_req=0;
-+void mtd_lock()
-+{
-+	struct task_struct *tsk = current;
-+	unsigned int value ;
-+	unsigned long flags;
-+	flash_req = 1;
-+	DECLARE_WAITQUEUE(wait, tsk);
-+	add_wait_queue(&wq, &wait);
-+	for(;;)
-+	{
-+		set_task_state(tsk, TASK_INTERRUPTIBLE);
-+		spin_lock_irqsave(&sl2312_flash_lock,flags);
-+		if((share_pin_flag&0x1E)){//||(check_sleep_flag&0x00000002)) {
-+			spin_unlock_irqrestore(&sl2312_flash_lock, flags);
-+			check_sleep_flag |= 0x00000001;
-+			if(dbg)
-+				printk("mtd yield %x %x\n",share_pin_flag,check_sleep_flag);
-+			wake_up_interruptible(&flash_wait);
-+			schedule();
-+		}
-+		else {
-+			check_sleep_flag &= ~0x01;
-+			share_pin_flag |= 0x00000001 ;			// set share pin flag
-+			spin_unlock_irqrestore(&sl2312_flash_lock, flags);
-+			value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+			value = value & (~PFLASH_SHARE_BIT) ;
-+			writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+			if(dbg)
-+				printk("mtd Go %x %x\n",share_pin_flag,check_sleep_flag);
-+			tsk->state = TASK_RUNNING;
-+			remove_wait_queue(&wq, &wait);
-+			return ;
-+		}
-+	}
-+}
-+
-+void mtd_unlock()
-+{
-+	unsigned int value ;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&sl2312_flash_lock,flags);		// Disable IRQ
-+	value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+	value = value | PFLASH_SHARE_BIT ;				// Disable Flash PADs
-+	writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+	share_pin_flag &= ~(0x00000001);			// clear share pin flag
-+	check_sleep_flag &= ~0x00000001;
-+	spin_unlock_irqrestore(&sl2312_flash_lock, flags);	// Restore IRQ
-+	if (check_sleep_flag & 0x00000002)
-+	{
-+		check_sleep_flag &= ~(0x00000002);
-+		wake_up_interruptible(&flash_wait);
-+	}
-+	DEBUG(MTD_DEBUG_LEVEL0, "Flash Unlock...\n");
-+	flash_req = 0;
-+}
-+#endif
-+/***********************************************************************/
-+
- static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
- {
- 	struct mtd_file_info *mfi = file->private_data;
-@@ -162,13 +233,21 @@ static ssize_t mtd_read(struct file *fil
- 	int len;
- 	char *kbuf;
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_lock();				// sl2312 share pin lock
-+#endif
-+
- 	DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
- 
- 	if (*ppos + count > mtd->size)
- 		count = mtd->size - *ppos;
- 
--	if (!count)
-+	if (!count){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return 0;
-+	}
- 
- 	/* FIXME: Use kiovec in 2.5 to lock down the user's buffers
- 	   and pass them directly to the MTD functions */
-@@ -178,8 +257,12 @@ static ssize_t mtd_read(struct file *fil
- 	else
- 		kbuf=kmalloc(count, GFP_KERNEL);
- 
--	if (!kbuf)
-+	if (!kbuf) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return -ENOMEM;
-+	}
- 
- 	while (count) {
- 
-@@ -224,6 +307,9 @@ static ssize_t mtd_read(struct file *fil
- 			*ppos += retlen;
- 			if (copy_to_user(buf, kbuf, retlen)) {
- 				kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+				mtd_unlock();				// sl2312 share pin lock
-+#endif
- 				return -EFAULT;
- 			}
- 			else
-@@ -235,13 +321,19 @@ static ssize_t mtd_read(struct file *fil
- 				count = 0;
- 		}
- 		else {
--			kfree(kbuf);
-+	 		kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return ret;
- 		}
- 
- 	}
- 
- 	kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 	return total_retlen;
- } /* mtd_read */
- 
-@@ -255,24 +347,40 @@ static ssize_t mtd_write(struct file *fi
- 	int ret=0;
- 	int len;
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_lock();				// sl2312 share pin lock
-+#endif
-+
- 	DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
- 
--	if (*ppos == mtd->size)
-+	if (*ppos == mtd->size){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return -ENOSPC;
-+	}
- 
- 	if (*ppos + count > mtd->size)
- 		count = mtd->size - *ppos;
- 
--	if (!count)
-+	if (!count){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return 0;
-+	}
- 
- 	if (count > MAX_KMALLOC_SIZE)
- 		kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
- 	else
- 		kbuf=kmalloc(count, GFP_KERNEL);
- 
--	if (!kbuf)
-+	if (!kbuf) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+		mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return -ENOMEM;
-+	}
- 
- 	while (count) {
- 
-@@ -283,6 +391,9 @@ static ssize_t mtd_write(struct file *fi
- 
- 		if (copy_from_user(kbuf, buf, len)) {
- 			kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
- 		}
- 
-@@ -323,11 +434,17 @@ static ssize_t mtd_write(struct file *fi
- 		}
- 		else {
- 			kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return ret;
- 		}
- 	}
- 
- 	kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 	return total_retlen;
- } /* mtd_write */
- 
-@@ -381,36 +498,67 @@ static int mtd_ioctl(struct inode *inode
- 	u_long size;
- 	struct mtd_info_user info;
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_lock();				// sl2312 share pin lock
-+#endif
-+
- 	DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
- 
- 	size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
- 	if (cmd & IOC_IN) {
- 		if (!access_ok(VERIFY_READ, argp, size))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 	}
- 	if (cmd & IOC_OUT) {
- 		if (!access_ok(VERIFY_WRITE, argp, size))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 	}
- 
- 	switch (cmd) {
- 	case MEMGETREGIONCOUNT:
- 		if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 		break;
- 
- 	case MEMGETREGIONINFO:
- 	{
- 		struct region_info_user ur;
- 
--		if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
-+		if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
--		if (ur.regionindex >= mtd->numeraseregions)
-+		if (ur.regionindex >= mtd->numeraseregions) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EINVAL;
-+		}
- 		if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
--				sizeof(struct mtd_erase_region_info)))
-+				sizeof(struct mtd_erase_region_info))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 		break;
- 	}
- 
-@@ -433,7 +581,12 @@ static int mtd_ioctl(struct inode *inode
- 		struct erase_info *erase;
- 
- 		if(!(file->f_mode & 2))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EPERM;
-+		}
- 
- 		erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
- 		if (!erase)
-@@ -447,6 +600,9 @@ static int mtd_ioctl(struct inode *inode
- 			if (copy_from_user(&erase->addr, argp,
- 				    sizeof(struct erase_info_user))) {
- 				kfree(erase);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+				mtd_unlock();				// sl2312 share pin lock
-+#endif
- 				return -EFAULT;
- 			}
- 			erase->mtd = mtd;
-@@ -484,14 +640,26 @@ static int mtd_ioctl(struct inode *inode
- 		struct mtd_oob_buf buf;
- 		struct mtd_oob_ops ops;
- 
--		if(!(file->f_mode & 2))
-+		if(!(file->f_mode & 2)) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EPERM;
-+		}
- 
--		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-+		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
--		if (buf.length > 4096)
-+		if (buf.length > 4096) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EINVAL;
-+		}
- 
- 		if (!mtd->write_oob)
- 			ret = -EOPNOTSUPP;
-@@ -499,8 +667,12 @@ static int mtd_ioctl(struct inode *inode
- 			ret = access_ok(VERIFY_READ, buf.ptr,
- 					buf.length) ? 0 : EFAULT;
- 
--		if (ret)
-+		if (ret) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return ret;
-+		}
- 
- 		ops.ooblen = buf.length;
- 		ops.ooboffs = buf.start & (mtd->oobsize - 1);
-@@ -536,19 +708,35 @@ static int mtd_ioctl(struct inode *inode
- 		struct mtd_oob_buf buf;
- 		struct mtd_oob_ops ops;
- 
--		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-+		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
--		if (buf.length > 4096)
-+		if (buf.length > 4096) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EINVAL;
-+		}
- 
--		if (!mtd->read_oob)
-+		if (!mtd->read_oob) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			ret = -EOPNOTSUPP;
-+		}
- 		else
- 			ret = access_ok(VERIFY_WRITE, buf.ptr,
- 					buf.length) ? 0 : -EFAULT;
--		if (ret)
-+		if (ret) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return ret;
-+		}
- 
- 		ops.ooblen = buf.length;
- 		ops.ooboffs = buf.start & (mtd->oobsize - 1);
-@@ -580,7 +768,12 @@ static int mtd_ioctl(struct inode *inode
- 		struct erase_info_user info;
- 
- 		if (copy_from_user(&info, argp, sizeof(info)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
- 		if (!mtd->lock)
- 			ret = -EOPNOTSUPP;
-@@ -594,7 +787,12 @@ static int mtd_ioctl(struct inode *inode
- 		struct erase_info_user info;
- 
- 		if (copy_from_user(&info, argp, sizeof(info)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
- 		if (!mtd->unlock)
- 			ret = -EOPNOTSUPP;
-@@ -629,11 +827,21 @@ static int mtd_ioctl(struct inode *inode
- 		loff_t offs;
- 
- 		if (copy_from_user(&offs, argp, sizeof(loff_t)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 		if (!mtd->block_isbad)
- 			ret = -EOPNOTSUPP;
- 		else
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return mtd->block_isbad(mtd, offs);
-+		}
- 		break;
- 	}
- 
-@@ -642,11 +850,21 @@ static int mtd_ioctl(struct inode *inode
- 		loff_t offs;
- 
- 		if (copy_from_user(&offs, argp, sizeof(loff_t)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 		if (!mtd->block_markbad)
- 			ret = -EOPNOTSUPP;
- 		else
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return mtd->block_markbad(mtd, offs);
-+		}
- 		break;
- 	}
- 
-@@ -654,8 +872,12 @@ static int mtd_ioctl(struct inode *inode
- 	case OTPSELECT:
- 	{
- 		int mode;
--		if (copy_from_user(&mode, argp, sizeof(int)))
-+		if (copy_from_user(&mode, argp, sizeof(int))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
- 		mfi->mode = MTD_MODE_NORMAL;
- 
-@@ -670,7 +892,12 @@ static int mtd_ioctl(struct inode *inode
- 	{
- 		struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
- 		if (!buf)
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -ENOMEM;
-+		}
- 		ret = -EOPNOTSUPP;
- 		switch (mfi->mode) {
- 		case MTD_MODE_OTP_FACTORY:
-@@ -701,12 +928,24 @@ static int mtd_ioctl(struct inode *inode
- 	{
- 		struct otp_info info;
- 
--		if (mfi->mode != MTD_MODE_OTP_USER)
-+		if (mfi->mode != MTD_MODE_OTP_USER) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EINVAL;
--		if (copy_from_user(&info, argp, sizeof(info)))
-+		}
-+		if (copy_from_user(&info, argp, sizeof(info))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
--		if (!mtd->lock_user_prot_reg)
-+		}
-+		if (!mtd->lock_user_prot_reg) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EOPNOTSUPP;
-+		}
- 		ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
- 		break;
- 	}
-@@ -742,8 +981,12 @@ static int mtd_ioctl(struct inode *inode
- 			break;
- 
- 		case MTD_MODE_RAW:
--			if (!mtd->read_oob || !mtd->write_oob)
-+			if (!mtd->read_oob || !mtd->write_oob) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+				mtd_unlock();				// sl2312 share pin lock
-+#endif
- 				return -EOPNOTSUPP;
-+			}
- 			mfi->mode = arg;
- 
- 		case MTD_MODE_NORMAL:
-@@ -766,6 +1009,10 @@ static int mtd_ioctl(struct inode *inode
- 		ret = -ENOTTY;
- 	}
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
-+
- 	return ret;
- } /* memory_ioctl */
- 
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -44,6 +44,13 @@ config MTD_NAND_AUTCPU12
- 	  This enables the driver for the autronix autcpu12 board to
- 	  access the SmartMediaCard.
- 
-+config MTD_NAND_SL2312
-+	tristate "NAND Flash device on Storlink board"
-+	depends on ARM && MTD_NAND && ARCH_SL2312
-+	help
-+	  This enables the driver for the Storlink board to
-+	  access the nand device.
-+
- config MTD_NAND_EDB7312
- 	tristate "Support for Cirrus Logic EBD7312 evaluation board"
- 	depends on ARCH_EDB7312
---- /dev/null
-+++ b/drivers/mtd/nand/sl2312-flash-nand.c
-@@ -0,0 +1,2287 @@
-+/*
-+ *  drivers/mtd/sl2312.c
-+ *
-+ * $Id: sl2312-flash-nand.c,v 1.5 2006/06/15 07:02:29 middle Exp $
-+ *
-+ * Copyright (C) 2001 Toshiba Corporation
-+ *
-+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
-+ * the terms of the GNU General Public License version 2. This program
-+ * is licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ *
-+ */
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "sl2312-flash-nand.h"
-+
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+
-+/*
-+ * NAND low-level MTD interface functions
-+ */
-+static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
-+static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+
-+static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
-+static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
-+static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
-+			unsigned long count, loff_t to, size_t * retlen);
-+static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
-+			unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
-+static void sl2312_nand_sync (struct mtd_info *mtd);
-+static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,  struct nand_oobinfo *oobsel);
-+static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt);
-+static int sl2312_nand_erase_block(struct mtd_info *mtd, int page);
-+
-+/*
-+ * MTD structure for sl2312 NDFMC
-+ */
-+static struct mtd_info *sl2312_mtd = NULL;
-+static int nand_page=0,nand_col=0;
-+
-+/* Define default oob placement schemes for large and small page devices */
-+static struct nand_oobinfo nand_oob_8 = {
-+	.useecc = MTD_NANDECC_AUTOPLACE,
-+	.eccbytes = 3,
-+	.eccpos = {0, 1, 2},
-+	.oobfree = { {3, 2}, {6, 2} }
-+};
-+
-+static struct nand_oobinfo nand_oob_16 = {
-+	.useecc = MTD_NANDECC_AUTOPLACE,
-+	.eccbytes = 6,
-+	.eccpos = {0, 1, 2, 3, 6, 7},
-+	.oobfree = { {8, 8} }
-+};
-+
-+static struct nand_oobinfo nand_oob_64 = {
-+	.useecc = MTD_NANDECC_AUTOPLACE,
-+	.eccbytes = 24,
-+	.eccpos = {
-+		40, 41, 42, 43, 44, 45, 46, 47,
-+		48, 49, 50, 51, 52, 53, 54, 55,
-+		56, 57, 58, 59, 60, 61, 62, 63},
-+	.oobfree = { {2, 38} }
-+};
-+
-+
-+/*
-+ * Define partitions for flash device
-+ */
-+/* the base address of FLASH control register */
-+#define FLASH_CONTROL_BASE_ADDR	    (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
-+#define SL2312_GLOBAL_BASE_ADDR     (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+//#define SL2312_FLASH_BASE_ADDR      (IO_ADDRESS(SL2312_FLASH_BASE))
-+#define SL2312_FLASH_BASE_ADDR       FLASH_VADDR(SL2312_FLASH_BASE)
-+static unsigned int CHIP_EN;
-+/* define read/write register utility */
-+//#define FLASH_READ_REG(offset)			(__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
-+//#define FLASH_WRITE_REG(offset,val) 	(__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
-+//#define FLASH_READ_DATA(offset)			(__raw_readb(offset+SL2312_FLASH_BASE_ADDR))
-+//#define FLASH_WRITE_DATA(offset,val) 	(__raw_writeb(val,offset+SL2312_FLASH_BASE_ADDR))
-+
-+unsigned int FLASH_READ_REG(unsigned int addr)
-+{
-+    unsigned int *base;
-+    unsigned int data;
-+
-+    base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
-+    data = *base;
-+    return (data);
-+}
-+
-+void FLASH_WRITE_REG(unsigned int addr,unsigned int data)
-+{
-+    unsigned int *base;
-+
-+    base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
-+    *base = data;
-+    return;
-+}
-+
-+unsigned int FLASH_READ_DATA(unsigned int addr)
-+{
-+    unsigned char *base;
-+    unsigned int data;
-+
-+    base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
-+    data = *base;
-+    return (data);
-+}
-+
-+void FLASH_WRITE_DATA(unsigned int addr,unsigned int data)
-+{
-+    unsigned char *base;
-+
-+    base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
-+    *base = data;
-+    return;
-+}
-+
-+/* the offset of FLASH control register */
-+enum NFLASH_REGISTER {
-+	NFLASH_ID     			= 0x0000,
-+	NFLASH_STATUS 			= 0x0008,
-+	NFLASH_TYPE   			= 0x000c,
-+	NFLASH_ACCESS			= 0x0030,
-+	NFLASH_COUNT			= 0x0034,
-+	NFLASH_CMD_ADDR 		= 0x0038,
-+	NFLASH_ADDRESS			= 0x003C,
-+	NFLASH_DATA				= 0x0040,
-+	NFLASH_TIMING   		= 0x004C,
-+	NFLASH_ECC_STATUS		= 0x0050,
-+	NFLASH_ECC_CONTROL		= 0x0054,
-+	NFLASH_ECC_OOB			= 0x005c,
-+	NFLASH_ECC_CODE_GEN0	= 0x0060,
-+	NFLASH_ECC_CODE_GEN1	= 0x0064,
-+	NFLASH_ECC_CODE_GEN2	= 0x0068,
-+	NFLASH_ECC_CODE_GEN3	= 0x006C,
-+	NFLASH_FIFO_CONTROL		= 0x0070,
-+	NFLASH_FIFO_STATUS		= 0x0074,
-+	NFLASH_FIFO_ADDRESS		= 0x0078,
-+	NFLASH_FIFO_DATA		= 0x007c,
-+};
-+
-+
-+
-+//#define FLASH_BASE	FLASH_CONTROL_BASE_ADDR
-+//#define FLASH_SIZE	0x00800000 //INTEGRATOR_FLASH_SIZE
-+
-+//#define FLASH_PART_SIZE 8388608
-+
-+//static unsigned int flash_indirect_access = 0;
-+
-+
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+void sl2312flash_enable_nand_flash(void)
-+{
-+    unsigned int    reg_val;
-+
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val & 0xfffffffb;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    return;
-+}
-+
-+void sl2312flash_disable_nand_flash(void)
-+{
-+    unsigned int    reg_val;
-+
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val | 0x00000004;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    return;
-+}
-+#endif
-+
-+extern struct nand_oobinfo jffs2_oobinfo;
-+/*
-+ * Define partitions for flash devices
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+	{ name: "RedBoot", offset: 0x00000000, size: 0x0020000, },
-+	{ name: "Kernel", offset: 0x00020000, size: 0x00200000, },
-+	{ name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
-+	{ name: "Application", offset: 0x004A0000, size: 0x00320000, },
-+	{ name: "VCTL", offset: 0x007C0000, size: 0x20000, },
-+	{ name: "CurConf", offset: 0x007E0000, size: 0x20000, },
-+	{ name: "FIS directory", offset: 0x007e0000, size: 0x00020000, }
-+
-+};
-+
-+
-+/*
-+ *	hardware specific access to control-lines
-+*/
-+static void sl2312_hwcontrol(struct mtd_info *mtd, int cmd)
-+{
-+
-+	return ;
-+}
-+
-+static int sl2312_nand_scan_bbt(struct mtd_info *mtd)
-+{
-+	return 0;
-+}
-+
-+/**
-+ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
-+ * @mtd:	MTD device structure
-+ * @ofs:	offset relative to mtd start
-+ */
-+static int sl2312_nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+	/* Check for invalid offset */
-+	if (ofs > mtd->size)
-+		return -EINVAL;
-+
-+	return sl2312_nand_block_checkbad (mtd, ofs, 1, 0);
-+}
-+
-+/**
-+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
-+ * @mtd:	MTD device structure
-+ * @ofs:	offset from device start
-+ * @getchip:	0, if the chip is already selected
-+ * @allowbbt:	1, if its allowed to access the bbt area
-+ *
-+ * Check, if the block is bad. Either by reading the bad block table or
-+ * calling of the scan function.
-+ */
-+
-+static int sl2312_nand_erase_block(struct mtd_info *mtd, int page)
-+{
-+	int opcode;
-+	/* Send commands to erase a page */
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+
-+		if(mtd->oobblock > 528)
-+		    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21);  // 3 address & 2 command
-+		else
-+		    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11);  // 2 address & 2 command
-+
-+		FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
-+		FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
-+
-+
-+
-+		/* read maker code */
-+		opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
-+		FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+		while(opcode&0x80000000) //polling flash access 31b
-+      	{
-+           opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+           //sl2312_flash_delay();
-+           schedule();
-+           //cond_resched();
-+      	}
-+}
-+
-+void sl2312_flash_delay(void)
-+{
-+      int i;
-+
-+      for(i=0; i<50; i++)
-+           i=i;
-+}
-+
-+static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (!this->bbt)
-+		return this->block_bad(mtd, ofs, getchip);
-+
-+	/* Return info from the table */
-+	return nand_isbad_bbt (mtd, ofs, allowbbt);
-+}
-+
-+/**
-+ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
-+ * @mtd:	MTD device structure
-+ * @ofs:	offset relative to mtd start
-+ */
-+static int sl2312_nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	int ret;
-+
-+        if ((ret = sl2312_nand_block_isbad(mtd, ofs))) {
-+        	/* If it was bad already, return success and do nothing. */
-+		if (ret > 0)
-+			return 0;
-+        	return ret;
-+        }
-+
-+	return this->block_markbad(mtd, ofs);
-+}
-+
-+/*
-+ *	Get chip for selected access
-+ */
-+static inline void sl2312_nand_get_chip (struct nand_chip *this, struct mtd_info *mtd, int new_state, int *erase_state)
-+{
-+
-+	DECLARE_WAITQUEUE (wait, current);
-+
-+	/*
-+	 * Grab the lock and see if the device is available
-+	 * For erasing, we keep the spinlock until the
-+	 * erase command is written.
-+	*/
-+retry:
-+	spin_lock_bh (&this->chip_lock);
-+
-+	if (this->state == FL_READY) {
-+		this->state = new_state;
-+		if (new_state != FL_ERASING)
-+			spin_unlock_bh (&this->chip_lock);
-+		return;
-+	}
-+
-+	if (this->state == FL_ERASING) {
-+		if (new_state != FL_ERASING) {
-+			this->state = new_state;
-+			spin_unlock_bh (&this->chip_lock);
-+			this->select_chip(mtd, 0);	/* select in any case */
-+			this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+			return;
-+		}
-+	}
-+
-+	set_current_state (TASK_UNINTERRUPTIBLE);
-+	add_wait_queue (&this->wq, &wait);
-+	spin_unlock_bh (&this->chip_lock);
-+	schedule ();
-+	remove_wait_queue (&this->wq, &wait);
-+	goto retry;
-+}
-+
-+/*
-+*	read device ready pin
-+*/
-+static int sl2312_device_ready(struct mtd_info *mtd)
-+{
-+	int ready;
-+
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+	FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000070); //set only command no address and two data
-+
-+	FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
-+
-+
-+	ready = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+	FLASH_WRITE_REG(NFLASH_ACCESS, ready);
-+
-+	while(ready&0x80000000) //polling flash access 31b
-+    {
-+        ready=FLASH_READ_REG(NFLASH_ACCESS);
-+        //sl2312_flash_delay();
-+		schedule();
-+    }
-+    FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+      	ready=FLASH_READ_REG(NFLASH_DATA)&0xff;
-+	return ready;
-+}
-+void sl2312_enable_hwecc(struct mtd_info *mtd, int mode)
-+{
-+	/* reset first */
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+
-+}
-+
-+
-+void sl2312_device_setup(void)
-+{
-+
-+}
-+static u_char sl2312_nand_read_byte(struct mtd_info *mtd)
-+{
-+
-+        unsigned int    data=0, page=0, col=0, tmp, i;
-+
-+        printk ("**************************sl2312_nand_read_byte !! \n");
-+        //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+        //col  = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+        page = nand_page;
-+        col  = nand_col;
-+        for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
-+        {
-+        	if(i==col)
-+				data = FLASH_READ_DATA(page*mtd->oobblock +i);
-+			else
-+				tmp = FLASH_READ_DATA(page*mtd->oobblock +i);
-+        }
-+        return data&0xff;
-+}
-+
-+static void sl2312_nand_write_byte(struct mtd_info *mtd, u_char byte)
-+{
-+        //struct nand_chip *this = mtd->priv;
-+        unsigned int    page=0, col=0, i;
-+        u_char *databuf,oobbuf[mtd->oobsize];
-+        size_t  retlen;
-+        retlen=0;
-+		printk ("********************sl2312_nand_write_byte !! \n");
-+		page = nand_page;
-+        col  = nand_col;
-+		databuf = kmalloc (mtd->oobsize+mtd->oobblock,GFP_KERNEL);
-+
-+		if (!databuf) {
-+			printk ("sl2312_nand_write_byte : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+		}
-+
-+		 for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
-+           	databuf[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
-+
-+        databuf[col] = byte;
-+        sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
-+
-+}
-+
-+static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+	int i, page=0,col=0;
-+	struct nand_chip *this = mtd->priv;
-+	u_char *databuf, *oobbuf;
-+        size_t  retlen;
-+        retlen=0;
-+
-+
-+		printk ("***********************sl2312_nand_write_buf !! \n");
-+		databuf = &(this->data_buf[0]);
-+		oobbuf = &(this->data_buf[mtd->oobblock]);
-+		for (i = 0; i < mtd->oobsize; i++)
-+			oobbuf[i] = 0xff;
-+
-+	if(len < mtd->oobblock)
-+	{
-+		//addr = FLASH_READ_REG(NFLASH_ADDRESS);
-+		//page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+		//col  = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+		page = nand_page;
-+        col  = nand_col;
-+
-+		sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, databuf, oobbuf, NULL);
-+
-+        for(i=col;ioobblock, &retlen, databuf, oobbuf, NULL);
-+
-+	}
-+
-+}
-+
-+static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+	int i, page=0,col=0,addr=0,tmp=0;
-+	//struct nand_chip *this = mtd->priv;
-+	printk ("********************sl2312_nand_read_buf !! \n");
-+	if(len < mtd->oobblock)
-+	{
-+		//addr = FLASH_READ_REG(NFLASH_ADDRESS);
-+		//page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+		//col  = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+		page = nand_page;
-+        col  = nand_col;
-+		for (i=col; i<((mtd->oobblock+mtd->oobsize)-col); i++)
-+		{
-+			if(ipriv;
-+	u_char *datatmp, *oobtmp;
-+	size_t  retlen;
-+	retlen=0;
-+
-+	datatmp = kmalloc (mtd->oobblock,GFP_KERNEL);
-+	oobtmp = kmalloc (mtd->oobsize,GFP_KERNEL);
-+
-+	if ((!datatmp)||(!oobtmp)) {
-+		printk ("sl2312_nand_verify_buf : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+	}
-+	//page = nand_page;
-+	for(i=0;ioobblock;i++)
-+		datatmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock +i);
-+	/* read oobdata */
-+	for (i = 0; i <  mtd->oobsize; i++)
-+		oobtmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock + mtd->oobblock + i);
-+
-+	if(len==mtd->oobblock)
-+	{
-+		for (i=0; i page: %x, byte: %x \n",nand_page,i);
-+				return i;
-+			}
-+		}
-+	}
-+	else if(len == mtd->oobsize)
-+	{
-+		for (i=0; i page: %x, byte: %x \n",nand_page,i);
-+				return i;
-+			}
-+		}
-+	}
-+	else
-+	{
-+		printk (KERN_WARNING "sl2312_nand_verify_buf : verify length not match 0x%08x\n", len);
-+		kfree(datatmp);
-+		kfree(oobtmp);
-+		return -1;
-+	}
-+
-+	kfree(datatmp);
-+	kfree(oobtmp);
-+	return 0;
-+}
-+
-+/*
-+ * Send command to NAND device
-+ */
-+static void sl2312_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
-+{
-+	register struct nand_chip *this = mtd->priv;
-+	int opcode;
-+
-+
-+	/*
-+	 * program and erase have their own busy handlers
-+	 * status and sequential in needs no delay
-+	*/
-+	switch (command) {
-+
-+	case NAND_CMD_PAGEPROG:
-+	case NAND_CMD_ERASE1:
-+	case NAND_CMD_ERASE2:
-+	case NAND_CMD_SEQIN:
-+	case NAND_CMD_STATUS:
-+	case NAND_CMD_READ0:
-+
-+		/*
-+		 * Write out the command to the device.
-+		 */
-+		if (column != -1 || page_addr != -1) {
-+
-+			/* Serially input address */
-+			if (column != -1)
-+				//FLASH_WRITE_REG(NFLASH_ADDRESS,column);
-+				nand_col=column;
-+
-+			opcode = FLASH_READ_REG(NFLASH_ADDRESS);
-+
-+			if (page_addr != -1)
-+				//FLASH_WRITE_REG(NFLASH_ADDRESS,opcode|(page_addr<<8));
-+				nand_page = page_addr;
-+
-+		}
-+		return;
-+
-+	case NAND_CMD_RESET:
-+		if (this->dev_ready)
-+			break;
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+		FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff70); //set only command and no other data
-+		FLASH_WRITE_REG(NFLASH_CMD_ADDR, NAND_CMD_RESET); //write reset command
-+
-+		opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+		FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+		while(opcode&0x80000000) //polling flash access 31b
-+      	{
-+           opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+           //sl2312_flash_delay();
-+           schedule();
-+      	}
-+		while ( !(sl2312_device_ready(mtd) & 0x40));
-+		{
-+			FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+			//sl2312_flash_delay();
-+			schedule();
-+			return;
-+		}
-+	/* This applies to read commands */
-+	default:
-+		/*
-+		 * If we don't have access to the busy pin, we apply the given
-+		 * command delay
-+		*/
-+		if (!this->dev_ready) {
-+			udelay (this->chip_delay);
-+			FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+			return;
-+		}
-+	}
-+
-+	/* wait until command is processed */
-+	while (!this->dev_ready(mtd));
-+
-+}
-+/*Add function*/
-+static void nand_read_id(int chip_no, unsigned char *id)
-+{
-+	unsigned int opcode, i;
-+
-+	if(chip_no==0)
-+		CHIP_EN = NFLASH_CHIP0_EN;
-+	else
-+		CHIP_EN = NFLASH_CHIP1_EN;
-+
-+	opcode = FLASH_READ_REG(NFLASH_TYPE);
-+
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+	if((opcode&0x00000300)<=0x00000100)
-+	    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000100); //set only command & address and two data
-+	else
-+	    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000300); //set only command & address and 4 data
-+
-+	FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000090); //write read id command
-+	FLASH_WRITE_REG(NFLASH_ADDRESS, 0x00000000); //write address 0x00
-+
-+	/* read maker code */
-+	opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
-+	FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+	opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+		while(opcode&0x80000000) //polling flash access 31b
-+      	{
-+           opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+           //sl2312_flash_delay();
-+           schedule();
-+      	}
-+
-+    opcode = FLASH_READ_REG(NFLASH_DATA);
-+    if(DWIDTH==NFLASH_WiDTH16)
-+    {
-+      		id[0] = opcode&0xff;
-+      		id[1] = (opcode&0xff00)>>8;
-+    }
-+    else
-+    {
-+    	    id[0] = opcode&0xff;
-+    	    opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
-+			FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+			opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+			while(opcode&0x80000000) //polling flash access 31b
-+    	  	{
-+    	       opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+    	       //sl2312_flash_delay();
-+    	       schedule();
-+    	  	}
-+    		opcode = FLASH_READ_REG(NFLASH_DATA);
-+      		id[1] = (opcode&0xff00)>>8;
-+
-+      		opcode=FLASH_READ_REG(NFLASH_TYPE);
-+      		if((opcode&0x300)>0x100)
-+      		{
-+      		    for(i=0;i<2;i++)
-+      		    {
-+      				//data cycle 3 & 4 ->not use
-+      				opcode = 0x80002000|DWIDTH|CHIP_EN;//set start bit & 8bits read command
-+					FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+					opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+      				while(opcode&0x80000000) //polling flash access 31b
-+      				{
-+        			   opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+        			   //sl2312_flash_delay();
-+        			   schedule();
-+      				}
-+
-+      				opcode=FLASH_READ_REG(NFLASH_DATA);
-+      				id[2+i] = (opcode&(0xff0000<>(8*(2+i));
-+      		    }
-+      		}
-+    }
-+    FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+}
-+
-+/*
-+ * NAND erase a block
-+ */
-+static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
-+{
-+	int page, len, status, pages_per_block, ret, chipnr;
-+	struct nand_chip *this = mtd->priv;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3,
-+	       "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
-+
-+	/* Start address must align on block boundary */
-+	if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Length must align on block boundary */
-+	if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Do not allow erase past end of device */
-+	if ((instr->len + instr->addr) > mtd->size) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
-+		return -EINVAL;
-+	}
-+
-+	instr->fail_addr = 0xffffffff;
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd, FL_ERASING, NULL);
-+
-+	/* Shift to get first page */
-+	page = (int) (instr->addr >> this->page_shift);
-+	chipnr = (int) (instr->addr >> this->chip_shift);
-+
-+	/* Calculate pages in each block */
-+	pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
-+
-+	/* Select the NAND device */
-+	//this->select_chip(mtd, chipnr);
-+	this->select_chip(mtd, 0);
-+
-+	/* Check the WP bit */
-+	/* Check, if it is write protected */
-+	status = sl2312_device_ready(mtd);
-+	if (!(status & 0x80)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
-+		instr->state = MTD_ERASE_FAILED;
-+		goto erase_exit;
-+	}
-+
-+	/* Loop through the pages */
-+	len = instr->len;
-+
-+	instr->state = MTD_ERASING;
-+
-+	while (len) {
-+		/* Check if we have a bad block, we do not erase bad blocks ! */
-+		if (this->block_bad(mtd, ((loff_t) page) << this->page_shift, 0)) {
-+			printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
-+			//instr->state = MTD_ERASE_FAILED;
-+			//goto erase_exit;
-+		}
-+
-+		/* Invalidate the page cache, if we erase the block which contains
-+		   the current cached page */
-+		if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
-+			this->pagebuf = -1;
-+		/////////
-+
-+		///* Send commands to erase a page */
-+		//FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+	    //
-+		//if(mtd->oobblock > 528)
-+		//    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21);  // 3 address & 2 command
-+		//else
-+		//    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11);  // 2 address & 2 command
-+		//
-+		//FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
-+		//FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
-+		//
-+		//
-+		//
-+		///* read maker code */
-+		//opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
-+		//FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+		//
-+		//while(opcode&0x80000000) //polling flash access 31b
-+      	//{
-+        //   opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+        //   //sl2312_flash_delay();
-+        //   schedule();
-+        //   //cond_resched();
-+      	//}
-+      	sl2312_nand_erase_block(mtd, page);
-+      	//////////////
-+		status = this->waitfunc (mtd, this, FL_ERASING);
-+		/* See if block erase succeeded */
-+		if (status & 0x01) {
-+			DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
-+			instr->state = MTD_ERASE_FAILED;
-+			instr->fail_addr = (page << this->page_shift);
-+			goto erase_exit;
-+		}
-+
-+		/* Increment page address and decrement length */
-+		len -= (1 << this->phys_erase_shift);
-+		page += pages_per_block;
-+
-+		/* Check, if we cross a chip boundary */
-+		if (len && !(page & this->pagemask)) {
-+			chipnr++;
-+			this->select_chip(mtd, 0);
-+			this->select_chip(mtd, 0);
-+		}
-+		//sl2312_flash_delay();
-+           schedule();
-+           //cond_resched();
-+	}
-+	instr->state = MTD_ERASE_DONE;
-+
-+erase_exit:
-+	/* De-select the NAND device */
-+	this->select_chip(mtd, 0);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;;
-+	/* Do call back function */
-+	if (!ret && instr->callback)
-+		instr->callback (instr);
-+
-+	/* The device is ready */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	spin_unlock_bh (&this->chip_lock);
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+	/* Return more or less happy */
-+	return ret;
-+}
-+
-+static void sl2312_nand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+	//struct nand_chip *this = mtd->priv;
-+
-+	switch(chip) {
-+	case -1:
-+		CHIP_EN = NFLASH_CHIP0_EN;
-+		break;
-+	case 0:
-+		CHIP_EN = NFLASH_CHIP0_EN;
-+		break;
-+	case 1:
-+		CHIP_EN = NFLASH_CHIP1_EN;
-+		break;
-+	default:
-+			CHIP_EN = NFLASH_CHIP0_EN;
-+			break;
-+	}
-+}
-+
-+/**
-+ * nand_default_block_markbad - [DEFAULT] mark a block bad
-+ * @mtd:	MTD device structure
-+ * @ofs:	offset from device start
-+ *
-+ * This is the default implementation, which can be overridden by
-+ * a hardware specific driver.
-+*/
-+static int sl2312_nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	u_char buf[2] = {0, 0};
-+	size_t	retlen;
-+	int block;
-+
-+	/* Get block number */
-+	block = ((int) ofs) >> this->bbt_erase_shift;
-+	this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
-+
-+	/* Do we have a flash based bad block table ? */
-+	if (this->options & NAND_USE_FLASH_BBT)
-+		return nand_update_bbt (mtd, ofs);
-+
-+	/* We write two bytes, so we dont have to mess with 16 bit access */
-+	ofs += mtd->oobsize + (this->badblockpos & ~0x01);
-+	return sl2312_nand_write_oob (mtd, ofs , 2, &retlen, buf);
-+}
-+
-+/* Appropriate chip should already be selected */
-+static int sl2312_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)//(struct mtd_info *mtd, unsigned long page, )
-+{
-+	u_char *buf, *oobbuf;
-+	size_t  retlen;
-+	unsigned long page, chipnr;
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (getchip) {
-+		page = (int)(ofs >> this->page_shift);
-+		chipnr = (int)(ofs >> this->chip_shift);
-+
-+		/* Grab the lock and see if the device is available */
-+		sl2312_nand_get_chip (this, mtd, FL_READING, NULL);
-+		/* Select the NAND device */
-+		this->select_chip(mtd, chipnr);
-+	} else
-+		page = (int) ofs;
-+
-+	buf = kmalloc (mtd->oobblock,GFP_KERNEL);
-+	oobbuf = kmalloc (mtd->oobsize,GFP_KERNEL);
-+
-+	if ((!buf)||(!oobbuf)) {
-+		printk ("sl2312_nand_block_bad : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+	}
-+
-+	sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, buf, oobbuf, NULL);
-+
-+
-+	if(((mtd->oobblock < 528)&&(oobbuf[5] != 0xff))||((mtd->oobblock > 528)&&(oobbuf[0] != 0xff)))
-+	{
-+		kfree(buf);
-+		kfree(oobbuf);
-+		return 1;
-+	}
-+
-+	kfree(buf);
-+	kfree(oobbuf);
-+	return 0;
-+}
-+
-+/*
-+*	Use NAND read ECC
-+*/
-+static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+	return sl2312_nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
-+}
-+
-+/*
-+ * NAND read with ECC
-+ */
-+static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-+			  size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
-+{
-+	int j, col, page, opcode, i;
-+	int end=0;//, ecc=0;//, end_page=0;
-+	int erase_state = 0;
-+	int read = 0, oob = 0, ecc_failed = 0;//, ecc_status = 0
-+	struct nand_chip *this = mtd->priv;
-+	u_char *data_poi, *oob_data = oob_buf;
-+	//u_char ecc_calc[6];
-+	//u_char ecc_code[6];
-+	int 	eccmode;
-+	int	*oob_config;
-+
-+
-+
-+	// use chip default if zero
-+	if (oobsel == NULL)
-+		oobsel = &mtd->oobinfo;
-+
-+	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+	oob_config = oobsel->eccpos;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+
-+	/* Do not allow reads past end of device */
-+	if ((from + len) > mtd->size) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
-+		*retlen = 0;
-+		return -EINVAL;
-+	}
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd ,FL_READING, &erase_state);
-+
-+	/* Select the NAND device */
-+	this->select_chip(mtd, 0);
-+
-+	/* First we calculate the starting page */
-+	page = from >> this->page_shift;
-+
-+	//end_page = mtd->oobblock + mtd->oobsize;
-+	end = mtd->oobblock;
-+	//ecc = mtd->eccsize;
-+	/* Get raw starting column */
-+	col = (from & (mtd->oobblock - 1));
-+
-+
-+	/* Send the read command */
-+	//this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
-+
-+	/* Loop until all data read */
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+	while (read < len) {
-+
-+		//udelay(1200);
-+		/* If we have consequent page reads, apply delay or wait for ready/busy pin */
-+		if (read) {
-+			if (!this->dev_ready)
-+				udelay (this->chip_delay);
-+			else
-+				while (!this->dev_ready(mtd));
-+		}
-+
-+		/*
-+		 * If the read is not page aligned, we have to read into data buffer
-+		 * due to ecc, else we read into return buffer direct
-+		 */
-+		if (!col && (len - read) >= end)
-+			data_poi = &buf[read];
-+		else
-+			data_poi = this->data_buf;
-+
-+		/* get oob area, if we have no oob buffer from fs-driver */
-+		if (!oob_buf) {
-+			oob_data = &this->data_buf[end];
-+			oob = 0;
-+		}
-+
-+		j = 0;
-+		switch (eccmode) {
-+			case NAND_ECC_NONE: {	/* No ECC, Read in a page */
-+				FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+				break;
-+			}
-+
-+			case NAND_ECC_SOFT:	/* Software ECC 3/256: Read in a page + oob data */
-+				break;
-+
-+			case NAND_ECC_HW3_256: /* Hardware ECC 3 byte /256 byte data: Read in first 256 byte, get ecc, */
-+				break;
-+
-+			case NAND_ECC_HW3_512:
-+			case NAND_ECC_HW6_512: /* Hardware ECC 3/6 byte / 512 byte data : Read in a page  */
-+				FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+				break;
-+
-+			default:
-+				printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+				FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0);
-+				//BUG();
-+		}//end switch
-+
-+			for(i=0;ioobblock +i);
-+			}
-+			/* read oobdata */
-+			for (i = 0; i <  mtd->oobsize; i++)
-+			{
-+				//udelay(7);
-+				oob_data[oob + i] = FLASH_READ_DATA(page*mtd->oobblock +end+i);
-+			}
-+
-+		/* Skip ECC, if not active */
-+			if (eccmode == NAND_ECC_NONE)
-+				goto readdata;
-+
-+			// compare ecc and correct data
-+
-+				opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+				while(!(opcode&0x80000000)) //polling flash access 31b
-+      			{
-+        			   opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+        			   //sl2312_flash_delay();
-+        			   schedule();
-+      			}
-+      			for(j=0;j<(end/512);j++)
-+      			{//for 2k page
-+
-+					opcode = 0x00000000|oob_data[mtd->oobsize-3-4*j]<<16|oob_data[mtd->oobsize-2-4*j]<<8|oob_data[mtd->oobsize-1-4*j];
-+
-+					//opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(j*4));
-+
-+					FLASH_WRITE_REG(NFLASH_ECC_OOB, opcode);
-+					opcode = 0x00000000|(j<<8); //select ECC code generation 0
-+					FLASH_WRITE_REG(NFLASH_ECC_CONTROL, opcode); //???
-+
-+					opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+					if((opcode&0x00000003)==0x03)
-+					{
-+						printk (KERN_WARNING "\nPageRead Uncorrectable error !!\n");
-+						ecc_failed++;
-+					}
-+					else if((opcode&0x00000003)==0x01)
-+					{
-+						printk (KERN_WARNING "\nPageRead One bit data error !!");
-+						// correct data
-+						if((data_poi[(opcode&0xff80)>>7]>>((opcode&0x38)>>3))%1)
-+							data_poi[(opcode&0xff80)>>7] &= ~(1<<((opcode&0x38)>>3));
-+						else
-+							data_poi[(opcode&0xff80)>>7] |= (1<<((opcode&0x38)>>3));
-+
-+					}
-+					else if((opcode&0x00000003)==0x02)
-+					{
-+						printk (KERN_WARNING "\nPageRead One bit ECC error !!\n");
-+					}
-+					else if((opcode&0x00000003)==0x00)
-+					{
-+
-+					}
-+
-+				}//for 2k page
-+readdata:
-+		if (col || (len - read) < end) {
-+			for (j = col; j < end && read < len; j++)
-+				buf[read++] = data_poi[j];
-+		} else
-+			read += mtd->oobblock;
-+		/* For subsequent reads align to page boundary. */
-+		col = 0;
-+		/* Increment page address */
-+		page++;
-+		schedule();
-+	}
-+	/* De-select the NAND device */
-+	//this->select_chip(mtd, -1);
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_INDIRECT);
-+	/* Wake up anyone waiting on the device */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	wake_up (&this->wq);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	/*
-+	 * Return success, if no ECC failures, else -EIO
-+	 * fs driver will take care of that, because
-+	 * retlen == desired len and result == -EIO
-+	 */
-+	*retlen = read;
-+	return ecc_failed ? -EIO : 0;
-+}
-+
-+/*
-+ * Wait for command done. This applies to erase and program only
-+ * Erase can take up to 400ms and program up to 20ms according to
-+ * general NAND and SmartMedia specs
-+ *
-+*/
-+static int sl2312_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
-+{
-+	unsigned long	timeo = jiffies;
-+	int	status, opcode;
-+
-+	if (state == FL_ERASING)
-+		 timeo += (HZ * 400) / 1000;
-+	else
-+		 timeo += (HZ * 20) / 1000;
-+
-+	spin_lock_bh (&this->chip_lock);
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+	FLASH_WRITE_REG(NFLASH_COUNT, 0x007f000070); //set only command no address and two data
-+
-+	FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
-+
-+
-+	opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+	FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+	while(opcode&0x80000000) //polling flash access 31b
-+    {
-+        opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+        //sl2312_flash_delay();
-+        schedule();
-+    }
-+
-+	while (time_before(jiffies, timeo)) {
-+		/* Check, if we were interrupted */
-+		if (this->state != state) {
-+			spin_unlock_bh (&this->chip_lock);
-+			FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+			return 0;
-+		}
-+		if (this->dev_ready) {
-+			if (this->dev_ready(mtd))
-+				break;
-+		}
-+		if (FLASH_READ_REG(NFLASH_DATA) & 0x40)
-+			break;
-+
-+		spin_unlock_bh (&this->chip_lock);
-+		yield ();
-+		spin_lock_bh (&this->chip_lock);
-+	}
-+	status = FLASH_READ_REG(NFLASH_DATA)&0xff;
-+	spin_unlock_bh (&this->chip_lock);
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+	return status;
-+}
-+
-+static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+	int i, col, page, j=0;
-+	//int erase_state = 0;
-+	struct nand_chip *this = mtd->priv;
-+	u_char *databuf, *oobbuf;
-+
-+	databuf = &this->data_buf[0];
-+	oobbuf = &this->data_buf[mtd->oobblock];
-+		for (i = 0; i < mtd->oobsize; i++)
-+			oobbuf[i] = 0xff;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+
-+	/* Shift to get page */
-+	page = ((int) from) >> this->page_shift;
-+
-+	/* Mask to get column */
-+	col = from & (mtd->oobsize-1);  //0x0f;
-+
-+	/* Initialize return length value */
-+	*retlen = 0;
-+	sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
-+	for(i=col,j=0;ioobsize||i<(col+len);i++,j++)
-+		buf[j] = oobbuf[i];
-+
-+	*retlen = j ;
-+	return 0;
-+}
-+
-+#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
-+/*
-+*	Use NAND write ECC
-+*/
-+static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+	return (sl2312_nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
-+}
-+
-+/*
-+ * NAND write with ECC
-+ */
-+static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
-+{
-+	int page, ret = 0, oob = 0, written = 0;
-+	struct nand_chip *this = mtd->priv;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+
-+	/* Do not allow write past end of device */
-+	if ((to + len) > mtd->size) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
-+		return -EINVAL;
-+	}
-+
-+	/* reject writes, which are not page aligned */
-+	if (NOTALIGNED (to) || NOTALIGNED(len)) {
-+		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
-+		return -EINVAL;
-+	}
-+
-+	// if oobsel is NULL, use chip defaults
-+	if (oobsel == NULL)
-+		oobsel = &mtd->oobinfo;
-+
-+	/* Shift to get page */
-+	page = ((int) to) >> this->page_shift;
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+	/* Select the NAND device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Check the WP bit */
-+	if (!(sl2312_device_ready(mtd) & 0x80)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Device is write protected!!!\n");
-+		ret = -EIO;
-+		goto out;
-+	}
-+
-+	/* Loop until all data is written */
-+	while (written < len) {
-+		//udelay(100);
-+		int cnt = mtd->oobblock;
-+		this->data_poi = (u_char*) &buf[written];
-+		/* We use the same function for write and writev */
-+		if (eccbuf) {
-+			ret = sl2312_nand_write_page (mtd, this, page, &eccbuf[oob], oobsel);
-+			oob += mtd->oobsize;
-+		} else
-+			ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
-+
-+		if (ret)
-+			goto out;
-+
-+		/* Update written bytes count */
-+		written += cnt;
-+		/* Increment page address */
-+		page++;
-+	}
-+
-+out:
-+	/* De-select the NAND device */
-+	//this->select_chip(mtd, -1);
-+
-+	/* Wake up anyone waiting on the device */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	wake_up (&this->wq);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	*retlen = written;
-+	return ret;
-+}
-+
-+/*
-+ *	Nand_page_program function is used for write and writev !
-+ *	This function will always program a full page of data
-+ *	If you call it with a non page aligned buffer, you're lost :)
-+ */
-+static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,  struct nand_oobinfo *oobsel)
-+{
-+	int 	i, j, status, opcode;
-+	u_char	ecc_code[16], *oob_data;
-+	int	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+	//int  	*oob_config = oobsel->eccpos;
-+
-+	/* pad oob area, if we have no oob buffer from fs-driver */
-+	if (!oob_buf) {
-+		oob_data = &this->data_buf[mtd->oobblock];
-+		for (i = 0; i < mtd->oobsize; i++)
-+			oob_data[i] = 0xff;
-+	} else
-+		oob_data = oob_buf;
-+
-+	/* Send command to begin auto page programming */
-+
-+	memset(oob_data,0xff,mtd->oobsize);
-+	/* Write out complete page of data, take care of eccmode */
-+	switch (eccmode) {
-+	/* No ecc and software ecc 3/256, write all */
-+	case NAND_ECC_NONE:
-+		printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+		break;
-+	case NAND_ECC_SOFT:
-+		break;
-+
-+	/* Hardware ecc 3 byte / 256 data, write first half, get ecc, then second, if 512 byte pagesize */
-+	case NAND_ECC_HW3_256:
-+		break;
-+
-+	/* Hardware ecc 3 byte / 512 byte data, write full page */
-+	case NAND_ECC_HW3_512:
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+
-+	/* Hardware ecc 6 byte / 512 byte data, write full page */
-+	case NAND_ECC_HW6_512:
-+		break;
-+
-+	default:
-+		printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+		//BUG();
-+	}
-+
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+
-+	for(i=0;ioobblock;i++)
-+	{
-+		//udelay(5);
-+		FLASH_WRITE_DATA((page*mtd->oobblock)+i,this->data_poi[i]);
-+	}
-+	///////////////
-+	if(eccmode!=NAND_ECC_NONE)
-+	{
-+		opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+		while(!(opcode&0x80000000)) //polling flash access 31b
-+    	{
-+    	 	   opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+    	 	   //sl2312_flash_delay();
-+    	 	   schedule();
-+    	}
-+
-+
-+    	for(i=0;i<(mtd->oobblock/512);i++)
-+    	{
-+    		opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(i*4));
-+
-+    		for(j=3;j>0;j--)
-+    		      oob_data[(mtd->oobsize-j-(i*4))] = (opcode<<((4-j)*8)) >>24;
-+
-+    		for(j=0;j<4;j++)
-+    		{
-+    			ecc_code[15-i*4] = opcode;
-+    			ecc_code[15-i*4-1] = opcode>>8;
-+    			ecc_code[15-i*4-2] = opcode>>16;
-+    		}
-+    	}
-+
-+    	//disable ecc
-+    	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000);
-+
-+    	/* Write out OOB data */
-+    	for(i=0;ioobsize;i++)
-+    	{
-+    		//udelay(5);
-+			FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,oob_data[i]);
-+		}
-+    }
-+    else
-+    {
-+    	for(i=0;ioobsize;i++)
-+    	{
-+    		//udelay(5);
-+			FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,0xff);
-+		}
-+    }
-+
-+
-+	/* call wait ready function */
-+	status = this->waitfunc (mtd, this, FL_WRITING);
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+	/* See if device thinks it succeeded */
-+	if (status & 0x01) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+		return -EIO;
-+	}
-+
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+	/*
-+	 * The NAND device assumes that it is always writing to
-+	 * a cleanly erased page. Hence, it performs its internal
-+	 * write verification only on bits that transitioned from
-+	 * 1 to 0. The device does NOT verify the whole page on a
-+	 * byte by byte basis. It is possible that the page was
-+	 * not completely erased or the page is becoming unusable
-+	 * due to wear. The read with ECC would catch the error
-+	 * later when the ECC page check fails, but we would rather
-+	 * catch it early in the page write stage. Better to write
-+	 * no data than invalid data.
-+	 */
-+
-+	/* Send command to read back the page */
-+	this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
-+	/* Loop through and verify the data */
-+	if (this->verify_buf(mtd, this->data_poi, mtd->oobblock)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+		return -EIO;
-+	}
-+
-+	/* check, if we have a fs-supplied oob-buffer */
-+	if (oob_buf) {
-+		if (this->verify_buf(mtd, oob_data, mtd->oobsize)) {
-+			DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+			return -EIO;
-+		}
-+	} else {
-+		if (eccmode != NAND_ECC_NONE) {
-+			int ecc_bytes = 0;
-+
-+			switch (this->eccmode) {
-+			case NAND_ECC_SOFT:
-+			case NAND_ECC_HW3_256: ecc_bytes = (mtd->oobblock == 512) ? 6 : 3; break;
-+			case NAND_ECC_HW3_512: ecc_bytes = 3; break;
-+			case NAND_ECC_HW6_512: ecc_bytes = 6; break;
-+			}
-+
-+
-+
-+			for(i=0;i < (mtd->oobblock+mtd->oobsize);i++)
-+			{
-+				if(i>=mtd->oobblock)
-+					oob_data[i-mtd->oobblock] = FLASH_READ_DATA((page*mtd->oobblock) +i);
-+				else
-+					oob_data[0] = FLASH_READ_DATA((page*mtd->oobblock) +i);
-+			}
-+
-+			if(this->eccmode == NAND_ECC_HW3_512)
-+			{
-+				for(i=0;i<(mtd->oobblock/512);i++)
-+    			{
-+    				for(j=0;j<3;j++)
-+    				{
-+    				    if (oob_data[mtd->oobsize-1-j-4*i] != ecc_code[15-j-4*i]) {
-+							DEBUG (MTD_DEBUG_LEVEL0,
-+							       "%s: Failed ECC write "
-+						       "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
-+							return -EIO;
-+						}
-+    				}
-+    			}
-+			}
-+		}//eccmode != NAND_ECC_NONE
-+	}
-+	/*
-+	 * Terminate the read command. This is faster than sending a reset command or
-+	 * applying a 20us delay before issuing the next programm sequence.
-+	 * This is not a problem for all chips, but I have found a bunch of them.
-+	 */
-+	//this->select_chip(mtd, -1);
-+	//this->select_chip(mtd, 0);
-+#endif
-+
-+	return 0;
-+}
-+
-+/*
-+ * NAND write with iovec
-+ */
-+static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+		loff_t to, size_t * retlen)
-+{
-+	return (sl2312_nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, 0));
-+}
-+
-+static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+		loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
-+{
-+	int i, page, len, total_len, ret = 0, written = 0;
-+	struct nand_chip *this = mtd->priv;
-+
-+	/* Calculate total length of data */
-+	total_len = 0;
-+	for (i = 0; i < count; i++)
-+		total_len += (int) vecs[i].iov_len;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3,
-+	       "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
-+
-+	/* Do not allow write past end of page */
-+	if ((to + total_len) > mtd->size) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
-+		return -EINVAL;
-+	}
-+
-+	/* reject writes, which are not page aligned */
-+	if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
-+		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
-+		return -EINVAL;
-+	}
-+
-+	// if oobsel is NULL, use chip defaults
-+	if (oobsel == NULL)
-+		oobsel = &mtd->oobinfo;
-+
-+	/* Shift to get page */
-+	page = ((int) to) >> this->page_shift;
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+	/* Select the NAND device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Check the WP bit */
-+	if (!(sl2312_device_ready(mtd) & 0x80)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "sl2312_nand_writev_ecc: Device is write protected!!!\n");
-+		ret = -EIO;
-+		goto out;
-+	}
-+
-+	/* Loop until all iovecs' data has been written */
-+	len = 0;
-+	while (count) {
-+		/*
-+		 *  Check, if the tuple gives us not enough data for a
-+		 *  full page write. Then we can use the iov direct,
-+		 *  else we have to copy into data_buf.
-+		 */
-+		if ((vecs->iov_len - len) >= mtd->oobblock) {
-+			this->data_poi = (u_char *) vecs->iov_base;
-+			this->data_poi += len;
-+			len += mtd->oobblock;
-+			/* Check, if we have to switch to the next tuple */
-+			if (len >= (int) vecs->iov_len) {
-+				vecs++;
-+				len = 0;
-+				count--;
-+			}
-+		} else {
-+			/*
-+			 * Read data out of each tuple until we have a full page
-+			 * to write or we've read all the tuples.
-+		 	*/
-+			int cnt = 0;
-+			while ((cnt < mtd->oobblock) && count) {
-+				if (vecs->iov_base != NULL && vecs->iov_len) {
-+					this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
-+				}
-+				/* Check, if we have to switch to the next tuple */
-+				if (len >= (int) vecs->iov_len) {
-+					vecs++;
-+					len = 0;
-+					count--;
-+				}
-+			}
-+			this->data_poi = this->data_buf;
-+		}
-+
-+		/* We use the same function for write and writev !) */
-+		ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
-+		if (ret)
-+			goto out;
-+
-+		/* Update written bytes count */
-+		written += mtd->oobblock;;
-+
-+		/* Increment page address */
-+		page++;
-+	}
-+
-+out:
-+	/* De-select the NAND device */
-+	//this->select_chip(mtd, -1);
-+
-+	/* Wake up anyone waiting on the device */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	wake_up (&this->wq);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	*retlen = written;
-+	return ret;
-+}
-+
-+/*
-+static u_char ffchars[] = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+*/
-+/*
-+ * NAND write out-of-band
-+ */
-+static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+	int column, page, status, ret = 0, j=0;
-+	struct nand_chip *this = mtd->priv;
-+	u_char *databuf, *oobbuf;
-+
-+
-+		databuf = &this->data_buf[0];
-+		oobbuf = &this->data_buf[mtd->oobblock];
-+		for (j = 0; j < mtd->oobsize; j++)
-+			oobbuf[j] = 0xff;
-+//#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+//	int 	i;
-+//#endif
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+	/* Shift to get page */
-+	page = ((int) to) >> this->page_shift;
-+
-+	/* Mask to get column */
-+	column = to & 0x1f;
-+
-+	/* Initialize return length value */
-+	*retlen = 0;
-+
-+	/* Do not allow write past end of page */
-+	if ((column + len) > mtd->oobsize) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+	/* Select the NAND device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Reset the chip. Some chips (like the Toshiba TC5832DC found
-+	   in one of my DiskOnChip 2000 test units) will clear the whole
-+	   data page too if we don't do this. I have no clue why, but
-+	   I seem to have 'fixed' it in the doc2000 driver in
-+	   August 1999.  dwmw2. */
-+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+
-+	/* Check the WP bit */
-+	if (!(sl2312_device_ready(mtd) & 0x80)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Device is write protected!!!\n");
-+		ret = -EIO;
-+		goto out;
-+	}
-+	/* Write out desired data */
-+	this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page);
-+
-+	sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
-+
-+    for(j=column;j<(column+len);j++)
-+    	oobbuf[j] = buf[j-column];
-+    sl2312_nand_write_ecc (mtd, page, mtd->oobblock, retlen, databuf, oobbuf, NULL);
-+
-+	status = this->waitfunc (mtd, this, FL_WRITING);
-+
-+	/* See if device thinks it succeeded */
-+	if (status & 0x01) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
-+		ret = -EIO;
-+		goto out;
-+	}
-+	/* Return happy */
-+	*retlen = len;
-+
-+
-+out:
-+	/* De-select the NAND device */
-+	//this->select_chip(mtd, -1);
-+
-+	/* Wake up anyone waiting on the device */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	wake_up (&this->wq);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	return ret;
-+}
-+
-+/*
-+ * NAND sync
-+ */
-+static void sl2312_nand_sync (struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	DECLARE_WAITQUEUE (wait, current);
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
-+
-+retry:
-+	/* Grab the spinlock */
-+	spin_lock_bh (&this->chip_lock);
-+
-+	/* See what's going on */
-+	switch (this->state) {
-+	case FL_READY:
-+	case FL_SYNCING:
-+		this->state = FL_SYNCING;
-+		spin_unlock_bh (&this->chip_lock);
-+		break;
-+
-+	default:
-+		/* Not an idle state */
-+		add_wait_queue (&this->wq, &wait);
-+		spin_unlock_bh (&this->chip_lock);
-+		schedule ();
-+
-+		remove_wait_queue (&this->wq, &wait);
-+		goto retry;
-+	}
-+
-+	/* Lock the device */
-+	spin_lock_bh (&this->chip_lock);
-+
-+	/* Set the device to be ready again */
-+	if (this->state == FL_SYNCING) {
-+		this->state = FL_READY;
-+		wake_up (&this->wq);
-+	}
-+
-+	/* Unlock the device */
-+	spin_unlock_bh (&this->chip_lock);
-+}
-+
-+
-+/*
-+ * Scan for the NAND device
-+ */
-+int sl2312_nand_scan (struct mtd_info *mtd, int maxchips)
-+{
-+	int i, j, nand_maf_id, nand_dev_id, busw;
-+	struct nand_chip *this = mtd->priv;
-+	unsigned char id[4];
-+
-+	/* Get buswidth to select the correct functions*/
-+	busw = this->options & NAND_BUSWIDTH_16;
-+
-+	/* check for proper chip_delay setup, set 20us if not */
-+	if (!this->chip_delay)
-+		this->chip_delay = 20;
-+
-+	/* check, if a user supplied command function given */
-+	if (this->cmdfunc == NULL)
-+		this->cmdfunc = sl2312_nand_command;
-+
-+	/* check, if a user supplied wait function given */
-+	if (this->waitfunc == NULL)
-+		this->waitfunc = sl2312_nand_waitfunc;
-+
-+	if (!this->select_chip)
-+		this->select_chip = sl2312_nand_select_chip;
-+	if (!this->write_byte)
-+		this->write_byte = sl2312_nand_write_byte; //busw ? nand_write_byte16 : nand_write_byte;
-+	if (!this->read_byte)
-+		this->read_byte = sl2312_nand_read_byte; //busw ? nand_read_byte16 : nand_read_byte;
-+//	if (!this->write_word)
-+//		this->write_word = nand_write_word;
-+//	if (!this->read_word)
-+//		this->read_word = nand_read_word;
-+//	if (!this->block_bad)
-+		this->block_bad = sl2312_nand_block_bad; //nand_block_bad;
-+	if (!this->block_markbad)
-+		this->block_markbad = sl2312_nand_default_block_markbad;
-+	if (!this->write_buf)
-+		this->write_buf = sl2312_nand_write_buf; //busw ? nand_write_buf16 : nand_write_buf;
-+	if (!this->read_buf)
-+		this->read_buf = sl2312_nand_read_buf; //busw ? nand_read_buf16 : nand_read_buf;
-+	if (!this->verify_buf)
-+		this->verify_buf = sl2312_nand_verify_buf; //busw ? nand_verify_buf16 : nand_verify_buf;
-+	if (!this->scan_bbt)
-+		this->scan_bbt = sl2312_nand_scan_bbt;
-+
-+	/* Select the device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Read manufacturer and device IDs */
-+	nand_read_id(0,id);
-+
-+	nand_maf_id = id[0];
-+	nand_dev_id = id[1];
-+
-+	/* Print and store flash device information */
-+	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-+
-+		if (nand_dev_id != nand_flash_ids[i].id)
-+			continue;
-+
-+		if (!mtd->name) mtd->name = nand_flash_ids[i].name;
-+		this->chipsize = nand_flash_ids[i].chipsize << 20;
-+
-+		/* New devices have all the information in additional id bytes */
-+		if (!nand_flash_ids[i].pagesize) {
-+			int extid;
-+
-+			/* The 4th id byte is the important one */
-+			extid = id[3];
-+			/* Calc pagesize */
-+			mtd->oobblock = 1024 << (extid & 0x3);
-+			extid >>= 2;
-+			/* Calc oobsize */
-+			mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
-+			extid >>= 2;
-+			/* Calc blocksize. Blocksize is multiples of 64KiB */
-+			mtd->erasesize = (64 * 1024)  << (extid & 0x03);
-+			extid >>= 2;
-+			/* Get buswidth information */
-+			busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-+
-+		} else {
-+			/* Old devices have this data hardcoded in the
-+			 * device id table */
-+			mtd->erasesize = nand_flash_ids[i].erasesize;
-+			mtd->oobblock = nand_flash_ids[i].pagesize;
-+			mtd->oobsize = mtd->oobblock / 32;
-+			busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
-+		}
-+
-+		/* Check, if buswidth is correct. Hardware drivers should set
-+		 * this correct ! */
-+		if (busw != (this->options & NAND_BUSWIDTH_16)) {
-+			printk (KERN_INFO "NAND device: Manufacturer ID:"
-+				" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
-+				nand_manuf_ids[i].name , mtd->name);
-+			printk (KERN_WARNING
-+				"NAND bus width %d instead %d bit\n",
-+					(this->options & NAND_BUSWIDTH_16) ? 16 : 8,
-+					busw ? 16 : 8);
-+			this->select_chip(mtd, -1);
-+			return 1;
-+		}
-+
-+		/* Calculate the address shift from the page size */
-+		this->page_shift = ffs(mtd->oobblock) - 1;
-+		this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
-+		this->chip_shift = ffs(this->chipsize) - 1;
-+
-+		/* Set the bad block position */
-+		this->badblockpos = mtd->oobblock > 512 ?
-+			NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
-+
-+		/* Get chip options, preserve non chip based options */
-+		this->options &= ~NAND_CHIPOPTIONS_MSK;
-+		this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
-+		/* Set this as a default. Board drivers can override it, if neccecary */
-+		this->options |= NAND_NO_AUTOINCR;
-+		/* Check if this is a not a samsung device. Do not clear the options
-+		 * for chips which are not having an extended id.
-+		 */
-+		if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
-+			this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-+
-+		/* Check for AND chips with 4 page planes */
-+	//	if (this->options & NAND_4PAGE_ARRAY)
-+	//		this->erase_cmd = multi_erase_cmd;
-+	//	else
-+	//		this->erase_cmd = single_erase_cmd;
-+
-+		/* Do not replace user supplied command function ! */
-+	//	if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
-+	//		this->cmdfunc = nand_command_lp;
-+
-+		/* Try to identify manufacturer */
-+		for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
-+			if (nand_manuf_ids[j].id == nand_maf_id)
-+				break;
-+		}
-+		printk (KERN_INFO "NAND device: Manufacturer ID:"
-+			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
-+			nand_manuf_ids[j].name , nand_flash_ids[i].name);
-+		break;
-+	}
-+	/////////////////////////////
-+
-+	for (i=1; i < maxchips; i++) {
-+		this->select_chip(mtd, i);
-+
-+		/* Send the command for reading device ID */
-+		nand_read_id(1,id);
-+
-+		/* Read manufacturer and device IDs */
-+		if (nand_maf_id != id[0] ||
-+		    nand_dev_id != id[1])
-+			break;
-+	}
-+	if (i > 1)
-+		printk(KERN_INFO "%d NAND chips detected\n", i);
-+
-+	/* Allocate buffers, if neccecary */
-+	if (!this->oob_buf) {
-+		size_t len;
-+		len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
-+		this->oob_buf = kmalloc (len, GFP_KERNEL);
-+		if (!this->oob_buf) {
-+			printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
-+			return -ENOMEM;
-+		}
-+		this->options |= NAND_OOBBUF_ALLOC;
-+	}
-+
-+	if (!this->data_buf) {
-+		size_t len;
-+		len = mtd->oobblock + mtd->oobsize;
-+		this->data_buf = kmalloc (len, GFP_KERNEL);
-+		if (!this->data_buf) {
-+			if (this->options & NAND_OOBBUF_ALLOC)
-+				kfree (this->oob_buf);
-+			printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
-+			return -ENOMEM;
-+		}
-+		this->options |= NAND_DATABUF_ALLOC;
-+	}
-+
-+	/* Store the number of chips and calc total size for mtd */
-+	this->numchips = i;
-+	mtd->size = i * this->chipsize;
-+	/* Convert chipsize to number of pages per chip -1. */
-+	this->pagemask = (this->chipsize >> this->page_shift) - 1;
-+	/* Preset the internal oob buffer */
-+	memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
-+
-+	/* If no default placement scheme is given, select an
-+	 * appropriate one */
-+	if (!this->autooob) {
-+		/* Select the appropriate default oob placement scheme for
-+		 * placement agnostic filesystems */
-+		switch (mtd->oobsize) {
-+		case 8:
-+			this->autooob = &nand_oob_8;
-+			break;
-+		case 16:
-+			this->autooob = &nand_oob_16;
-+			break;
-+		case 64:
-+			this->autooob = &nand_oob_64;
-+			break;
-+		default:
-+			printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
-+				mtd->oobsize);
-+			BUG();
-+		}
-+	}
-+
-+	/* The number of bytes available for the filesystem to place fs dependend
-+	 * oob data */
-+	if (this->options & NAND_BUSWIDTH_16) {
-+		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
-+		if (this->autooob->eccbytes & 0x01)
-+			mtd->oobavail--;
-+	} else
-+		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
-+
-+
-+	/*
-+	 * check ECC mode, default to software
-+	 * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
-+	 * fallback to software ECC
-+	*/
-+	this->eccsize = 256;	/* set default eccsize */
-+	this->eccbytes = 3;
-+
-+	switch (this->eccmode) {
-+	case NAND_ECC_HW12_2048:
-+		if (mtd->oobblock < 2048) {
-+			printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
-+			       mtd->oobblock);
-+			this->eccmode = NAND_ECC_SOFT;
-+			this->calculate_ecc = nand_calculate_ecc;
-+			this->correct_data = nand_correct_data;
-+		} else
-+			this->eccsize = 2048;
-+		break;
-+
-+	case NAND_ECC_HW3_512:
-+	case NAND_ECC_HW6_512:
-+	case NAND_ECC_HW8_512:
-+		if (mtd->oobblock == 256) {
-+			printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
-+			this->eccmode = NAND_ECC_SOFT;
-+			this->calculate_ecc = nand_calculate_ecc;
-+			this->correct_data = nand_correct_data;
-+		} else
-+			this->eccsize = 512; /* set eccsize to 512 */
-+		break;
-+
-+	case NAND_ECC_HW3_256:
-+		break;
-+
-+	case NAND_ECC_NONE:
-+		printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
-+		this->eccmode = NAND_ECC_NONE;
-+		break;
-+
-+	case NAND_ECC_SOFT:
-+		this->calculate_ecc = nand_calculate_ecc;
-+		this->correct_data = nand_correct_data;
-+		break;
-+
-+	default:
-+		printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+		BUG();
-+	}
-+
-+	/* Check hardware ecc function availability and adjust number of ecc bytes per
-+	 * calculation step
-+	*/
-+	switch (this->eccmode) {
-+	case NAND_ECC_HW12_2048:
-+		this->eccbytes += 4;
-+	case NAND_ECC_HW8_512:
-+		this->eccbytes += 2;
-+	case NAND_ECC_HW6_512:
-+		this->eccbytes += 3;
-+//	case NAND_ECC_HW3_512:
-+	case NAND_ECC_HW3_256:
-+		if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
-+			break;
-+		printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
-+		BUG();
-+	}
-+
-+	mtd->eccsize = this->eccsize;
-+
-+	/* Set the number of read / write steps for one page to ensure ECC generation */
-+	switch (this->eccmode) {
-+	case NAND_ECC_HW12_2048:
-+		this->eccsteps = mtd->oobblock / 2048;
-+		break;
-+	case NAND_ECC_HW3_512:
-+	case NAND_ECC_HW6_512:
-+	case NAND_ECC_HW8_512:
-+		this->eccsteps = mtd->oobblock / 512;
-+		break;
-+	case NAND_ECC_HW3_256:
-+	case NAND_ECC_SOFT:
-+		this->eccsteps = mtd->oobblock / 256;
-+		break;
-+
-+	case NAND_ECC_NONE:
-+		this->eccsteps = 1;
-+		break;
-+	}
-+
-+	/* Initialize state, waitqueue and spinlock */
-+	this->state = FL_READY;
-+	init_waitqueue_head (&this->wq);
-+	spin_lock_init (&this->chip_lock);
-+
-+	/* De-select the device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Print warning message for no device */
-+	if (!mtd->size) {
-+		printk (KERN_WARNING "No NAND device found!!!\n");
-+		return 1;
-+	}
-+
-+	/* Fill in remaining MTD driver data */
-+	mtd->type = MTD_NANDFLASH;
-+	mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
-+	mtd->ecctype = MTD_ECC_SW;
-+	mtd->erase = sl2312_nand_erase;
-+	mtd->point = NULL;
-+	mtd->unpoint = NULL;
-+	mtd->read = sl2312_nand_read;
-+	mtd->write = sl2312_nand_write;
-+	mtd->read_ecc = sl2312_nand_read_ecc;
-+	mtd->write_ecc = sl2312_nand_write_ecc;
-+	mtd->read_oob = sl2312_nand_read_oob;
-+	mtd->write_oob = sl2312_nand_write_oob;
-+	mtd->readv = NULL;
-+	mtd->writev = sl2312_nand_writev;
-+	mtd->writev_ecc = sl2312_nand_writev_ecc;
-+	mtd->sync = sl2312_nand_sync;
-+	mtd->lock = NULL;
-+	mtd->unlock = NULL;
-+	mtd->suspend = NULL;
-+	mtd->resume = NULL;
-+	mtd->block_isbad = sl2312_nand_block_isbad;
-+	mtd->block_markbad = sl2312_nand_block_markbad;
-+
-+	/* and make the autooob the default one */
-+	memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
-+
-+	mtd->owner = THIS_MODULE;
-+
-+	/* Build bad block table */
-+	return this->scan_bbt (mtd);
-+}
-+
-+/*End Add function*/
-+
-+/*
-+ * Main initialization routine
-+ */
-+extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-+
-+int __init sl2312_mtd_init (void)
-+{
-+	struct nand_chip *this;
-+	int err = 0;
-+	struct mtd_partition *parts;
-+	int nr_parts = 0;
-+	int ret, data, *base;
-+
-+	printk("NAND MTD Driver Start Init ......\n");
-+
-+    	base = (unsigned int *)(IO_ADDRESS(SL2312_GLOBAL_BASE) + 0x30);
-+    	data = *base;
-+    	data&=0xffffffeb;
-+    	data|=0x3; //disable p & s flash
-+        *base = data;
-+
-+	/* Allocate memory for MTD device structure and private data */
-+	sl2312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-+	if (!sl2312_mtd) {
-+		printk ("Unable to allocate SL2312 NAND MTD device structure.\n");
-+		err = -ENOMEM;
-+		goto out;
-+	}
-+
-+      //  sl2312_device_setup();
-+
-+	/* io is indirect via a register so don't need to ioremap address */
-+
-+	/* Get pointer to private data */
-+	this = (struct nand_chip *) (&sl2312_mtd[1]);
-+
-+	/* Initialize structures */
-+	memset((char *) sl2312_mtd, 0, sizeof(struct mtd_info));
-+	memset((char *) this, 0, sizeof(struct nand_chip));
-+
-+	/* Link the private data with the MTD structure */
-+	sl2312_mtd->priv = this;
-+	sl2312_mtd->name = "sl2312-nand";
-+
-+	/* Set address of NAND IO lines */
-+	this->IO_ADDR_R = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
-+	this->IO_ADDR_W = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
-+	this->read_byte = sl2312_nand_read_byte;
-+    this->write_byte = sl2312_nand_write_byte;
-+    this->write_buf = sl2312_nand_write_buf;
-+	this->read_buf = sl2312_nand_read_buf;
-+	this->verify_buf = sl2312_nand_verify_buf;
-+	this->select_chip = sl2312_nand_select_chip;
-+	this->block_bad = sl2312_nand_block_bad;
-+	this->hwcontrol = sl2312_hwcontrol;
-+	this->dev_ready = sl2312_device_ready;
-+	this->cmdfunc = sl2312_nand_command;
-+	this->waitfunc = sl2312_nand_waitfunc;
-+	//this->calculate_ecc = sl2312_readecc;
-+	this->enable_hwecc = sl2312_enable_hwecc;
-+	this->eccmode = NAND_ECC_HW3_512;
-+	/*this->eccsize = 512;	*/
-+	/* 20 us command delay time */
-+	this->chip_delay = 20;
-+
-+	this->correct_data = nand_correct_data;
-+//	this->scan_bbt = sl2312_nand_scan_bbt;
-+
-+	/* Allocate memory for internal data buffer */
-+	this->data_buf = kmalloc (sizeof(u_char) * (sl2312_mtd->oobblock + sl2312_mtd->oobsize), GFP_KERNEL);
-+	if (!this->data_buf) {
-+		printk ("Unable to allocate NAND data buffer.\n");
-+		err = -ENOMEM;
-+		goto out_ior;
-+	}
-+
-+	/* Scan to find existance of the device */
-+	if (sl2312_nand_scan(sl2312_mtd, 1)) {
-+		err = -ENXIO;
-+		goto out_ior;
-+	}
-+
-+	/* Register the partitions */
-+	parts = sl2312_partitions;
-+	nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+
-+	ret = add_mtd_partitions(sl2312_mtd, sl2312_partitions, nr_parts);
-+	/*If we got an error, free all resources.*/
-+	if (ret < 0) {
-+		del_mtd_partitions(sl2312_mtd);
-+		map_destroy(sl2312_mtd);
-+	}
-+	goto out;
-+
-+//out_buf:
-+//	kfree (this->data_buf);
-+out_ior:
-+out:
-+	printk("NAND MTD Driver Init Success ......\n");
-+	return err;
-+}
-+
-+module_init(sl2312_mtd_init);
-+
-+/*
-+ * Clean up routine
-+ */
-+#ifdef MODULE
-+static void __exit sl2312_cleanup (void)
-+{
-+	struct nand_chip *this = (struct nand_chip *) &sl2312_mtd[1];
-+
-+	/* Unregister partitions */
-+	del_mtd_partitions(sl2312_mtd);
-+
-+	/* Unregister the device */
-+	del_mtd_device (sl2312_mtd);
-+
-+	/* Free internal data buffers */
-+	kfree (this->data_buf);
-+
-+	/* Free the MTD device structure */
-+	kfree (sl2312_mtd);
-+}
-+module_exit(sl2312_cleanup);
-+#endif
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Alice Hennessy ");
-+MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBsl2312");
---- /dev/null
-+++ b/drivers/mtd/nand/sl2312-flash-nand.h
-@@ -0,0 +1,24 @@
-+#ifndef SL2312_FLASH_NAND_H
-+#define SL2312_FLASH_NAND_H
-+
-+#include 
-+#include 
-+
-+/*Add function*/
-+static void nand_read_id(int chip_no,unsigned char *id);
-+
-+
-+
-+#define	NFLASH_WiDTH8              0x00000000
-+#define	NFLASH_WiDTH16             0x00000400
-+#define	NFLASH_WiDTH32             0x00000800
-+#define NFLASH_CHIP0_EN            0x00000000  // 16th bit = 0
-+#define NFLASH_CHIP1_EN            0x00010000  // 16th bit = 1
-+#define	NFLASH_DIRECT              0x00004000
-+#define	NFLASH_INDIRECT            0x00000000
-+
-+
-+#define	DWIDTH             NFLASH_WiDTH8
-+
-+
-+#endif /* SL2312_FLASH_NAND_H */
---- /dev/null
-+++ b/include/linux/mtd/kvctl.h
-@@ -0,0 +1,40 @@
-+#ifndef KVCTL_H
-+#define KVCTL_H
-+
-+#define VCTL_HEAD_SIZE	8
-+#define VCTL_ENTRY_LEN	20
-+
-+typedef struct
-+{
-+  char header[4];
-+  unsigned int entry_num;
-+} vctl_mheader;
-+
-+typedef struct
-+{
-+  char header[4];
-+  unsigned int size;
-+  unsigned int type;
-+  char majorver[4];
-+  char minorver[4];
-+  unsigned char *payload;
-+} vctl_entry;
-+
-+typedef struct
-+{
-+  unsigned char mac[6];
-+  unsigned char vlanid;
-+  unsigned char vlanmap;
-+} vlaninfo;
-+
-+#define VCT_VENDORSPEC		0
-+#define VCT_BOOTLOADER		1
-+#define VCT_KERNEL		2
-+#define VCT_VERCTL		3
-+#define VCT_CURRCONF		4
-+#define VCT_DEFAULTCONF		5
-+#define VCT_ROOTFS		6
-+#define VCT_APP			7
-+#define VCT_VLAN		8
-+
-+#endif
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -71,3 +71,7 @@ obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
- obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
- obj-$(CONFIG_MTD_MTX1)		+= mtx-1_flash.o
- obj-$(CONFIG_MTD_TQM834x)	+= tqm834x.o
-+###### for Storlink Soc #######
-+obj-$(CONFIG_MTD_SL2312_CFI) += sl2312-flash-cfi.o
-+obj-$(CONFIG_MTD_SL2312_SERIAL_ATMEL) += sl2312-flash-atmel.o
-+obj-$(CONFIG_MTD_SL2312_SERIAL_ST) += sl2312-flash-m25p80.o
diff --git a/target/linux/storm/patches/008-serial.patch b/target/linux/storm/patches/008-serial.patch
deleted file mode 100644
index a5c5e8de3f..0000000000
--- a/target/linux/storm/patches/008-serial.patch
+++ /dev/null
@@ -1,2809 +0,0 @@
---- /dev/null
-+++ b/drivers/serial/it8712.c
-@@ -0,0 +1,858 @@
-+/*
-+ *  linux/drivers/char/serial_uart00.c
-+ *
-+ *  Driver for UART00 serial ports
-+ *
-+ *  Based on drivers/char/serial_amba.c, by ARM Limited &
-+ *                                          Deep Blue Solutions Ltd.
-+ *  Copyright 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *  $Id: it8712.c,v 1.2 2006/06/06 06:36:04 middle Exp $
-+ *
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "it8712.h"
-+
-+//#define DEBUG           1
-+#define UART_NR		1
-+
-+#define SERIAL_IT8712_NAME	"ttySI"
-+#define SERIAL_IT8712_MAJOR	204
-+#define SERIAL_IT8712_MINOR	41      /* Temporary - will change in future */
-+#define SERIAL_IT8712_NR	UART_NR
-+#define UART_PORT_SIZE 0x50
-+#define LPC_HOST_CONTINUE_MODE	0x00000040
-+
-+#define IT8712_NO_PORTS         UART_NR
-+#define IT8712_ISR_PASS_LIMIT	256
-+
-+#define LPC_BUS_CTRL	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
-+#define LPC_BUS_STATUS	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
-+#define LPC_SERIAL_IRQ_CTRL	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 8))
-+#define LPC_SERIAL_IRQ_STATUS	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x0c))
-+#define LPC_SERIAL_IRQ_TRITYPE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x10))
-+#define LPC_SERIAL_IRQ_POLARITY	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x14))
-+#define LPC_SERIAL_IRQ_ENABLE	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x18))
-+
-+
-+
-+
-+/*
-+ * Access macros for the SL2312 UARTs
-+ */
-+#define UART_GET_INT_STATUS(p)	(inb(((p)->membase+UART_IIR)) & 0x0F)  // interrupt identification
-+#define UART_PUT_IER(p, c)      outb(c,((p)->membase+UART_IER))         // interrupt enable
-+#define UART_GET_IER(p)         inb(((p)->membase+UART_IER))
-+#define UART_PUT_CHAR(p, c)     outb(c,((p)->membase+UART_TX))         // transmitter holding
-+#define UART_GET_CHAR(p)        inb(((p)->membase+UART_RX))            // receive buffer
-+#define UART_GET_LSR(p)         inb(((p)->membase+UART_LSR))            // line status
-+#define UART_GET_MSR(p)         inb(((p)->membase+UART_MSR))            // modem status
-+#define UART_GET_MCR(p)         inb(((p)->membase+UART_MCR))            // modem control
-+#define UART_PUT_MCR(p, c)      outb(c,((p)->membase+UART_MCR))
-+#define UART_GET_LCR(p)         inb(((p)->membase+UART_LCR))       // mode control
-+#define UART_PUT_LCR(p, c)      outb(c,((p)->membase+UART_LCR))
-+#define UART_PUT_FCR(p, c)      outb(c,((p)->membase+UART_FCR))       // fifo control
-+#define UART_GET_DIV_HI(p)	inb(((p)->membase+UART_DLM))
-+#define UART_PUT_DIV_HI(p, c)	outb(c,((p)->membase+UART_DLM))
-+#define UART_GET_DIV_LO(p)	inb(((p)->membase+UART_DLL))
-+#define UART_PUT_DIV_LO(p, c)	outb(c,((p)->membase+UART_DLL))
-+#define UART_PUT_MDR(p, c)      outb(c,UART_MDR((p)->membase))
-+#define UART_RX_DATA(s)		((s) & UART_LSR_DR)
-+#define UART_TX_READY(s)	((s) & UART_LSR_THRE)
-+
-+static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
-+{
-+        unsigned int reg;
-+
-+        //printk("it8712 stop tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_THRI);
-+	UART_PUT_IER(port, reg);
-+}
-+
-+static void it8712_stop_rx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+        //printk("it8712 stop rx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_RDI);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void it8712_enable_ms(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+        //printk("it8712 enable ms : \n");
-+
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_MSI);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void it8712_rx_chars(struct uart_port *port, struct pt_regs *regs)
-+{
-+	struct tty_struct *tty = port->info->tty;
-+	unsigned int status, mask, ch, flg, ignored = 0;
-+
-+ //       printk("it8712_rx_chars : \n");
-+	status = UART_GET_LSR(port);
-+	while (UART_RX_DATA(status)) {
-+
-+		/*
-+		 * We need to read rds before reading the
-+		 * character from the fifo
-+		 */
-+		ch = UART_GET_CHAR(port);
-+		port->icount.rx++;
-+
-+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+			goto ignore_char;
-+
-+		flg = TTY_NORMAL;
-+
-+		/*
-+		 * Note that the error handling code is
-+		 * out of the main execution path
-+		 */
-+
-+		if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
-+			goto handle_error;
-+		if (uart_handle_sysrq_char(port, ch, regs))
-+			goto ignore_char;
-+
-+	error_return:
-+		*tty->flip.flag_buf_ptr++ = flg;
-+		*tty->flip.char_buf_ptr++ = ch;
-+		tty->flip.count++;
-+	ignore_char:
-+		status = UART_GET_LSR(port);
-+	} // end of while
-+out:
-+	tty_flip_buffer_push(tty);
-+	return;
-+
-+handle_error:
-+	if (status & UART_LSR_BI) {
-+		status &= ~(UART_LSR_FE);
-+		port->icount.brk++;
-+
-+#ifdef SUPPORT_SYSRQ
-+		if (uart_handle_break(port))
-+			goto ignore_char;
-+#endif
-+	} else if (status & UART_LSR_PE)
-+		port->icount.parity++;
-+	else if (status & UART_LSR_FE)
-+		port->icount.frame++;
-+
-+	if (status & UART_LSR_OE)
-+		port->icount.overrun++;
-+
-+	if (status & port->ignore_status_mask) {
-+		if (++ignored > 100)
-+			goto out;
-+		goto ignore_char;
-+	}
-+
-+	mask = status & port->read_status_mask;
-+
-+	if (mask & UART_LSR_BI)
-+		flg = TTY_BREAK;
-+	else if (mask & UART_LSR_PE)
-+		flg = TTY_PARITY;
-+	else if (mask & UART_LSR_FE)
-+		flg = TTY_FRAME;
-+
-+	if (status & UART_LSR_OE) {
-+		/*
-+		 * CHECK: does overrun affect the current character?
-+		 * ASSUMPTION: it does not.
-+		 */
-+		*tty->flip.flag_buf_ptr++ = flg;
-+		*tty->flip.char_buf_ptr++ = ch;
-+		tty->flip.count++;
-+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+			goto ignore_char;
-+		ch = 0;
-+		flg = TTY_OVERRUN;
-+	}
-+#ifdef SUPPORT_SYSRQ
-+	port->sysrq = 0;
-+#endif
-+	goto error_return;
-+}
-+
-+static void it8712_tx_chars(struct uart_port *port)
-+{
-+        struct circ_buf *xmit = &port->info->xmit;
-+	int count;
-+
-+	if (port->x_char) {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, port->x_char);
-+		port->icount.tx++;
-+		port->x_char = 0;
-+
-+		return;
-+	}
-+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-+		it8712_stop_tx(port, 0);
-+		return;
-+	}
-+
-+	count = port->fifosize >> 1;
-+	do {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
-+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-+		port->icount.tx++;
-+		if (uart_circ_empty(xmit))
-+			break;
-+	} while (--count > 0);
-+
-+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+		uart_write_wakeup(port);
-+
-+	if (uart_circ_empty(xmit))
-+		it8712_stop_tx(port, 0);
-+}
-+
-+static void it8712_start_tx(struct uart_port *port, unsigned int tty_start)
-+{
-+        unsigned int reg;
-+
-+        //printk("it8712 start tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_THRI);
-+	UART_PUT_IER(port, reg);
-+	it8712_tx_chars(port);
-+}
-+
-+static void it8712_modem_status(struct uart_port *port)
-+{
-+	unsigned int status;
-+
-+//        printk("it8712 modem status : \n");
-+
-+	status = UART_GET_MSR(port);
-+
-+	if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
-+		       UART_MSR_TERI | UART_MSR_DDCD)))
-+		return;
-+
-+        if (status & UART_MSR_DDCD)
-+                uart_handle_dcd_change(port, status & UART_MSR_DCD);
-+
-+        if (status & UART_MSR_DDSR)
-+                port->icount.dsr++;
-+
-+        if (status & UART_MSR_DCTS)
-+                uart_handle_cts_change(port, status & UART_MSR_CTS);
-+
-+	wake_up_interruptible(&port->info->delta_msr_wait);
-+
-+}
-+
-+static irqreturn_t  it8712_int(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct uart_port *port = dev_id;
-+	unsigned int status, pass_counter = 0, data;
-+
-+
-+		data = LPC_SERIAL_IRQ_STATUS;
-+	if((data&0x10)==0x10)
-+	{
-+		status = UART_GET_INT_STATUS(port);
-+		do {
-+//			     printk("it8712_int: status %x \n", status);
-+			switch(status)
-+			{
-+			   case UART_IIR_RDI:
-+			   case UART_IIR_RLSI:
-+			   case UART_IIR_RCTO:
-+				it8712_rx_chars(port, regs);
-+			   break;
-+			   case UART_IIR_THRI:
-+				it8712_tx_chars(port);
-+			   break;
-+			   case UART_IIR_MSI:
-+				it8712_modem_status(port);
-+			   break;
-+			   default:
-+			   break;
-+			}
-+			if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
-+				break;
-+
-+			status = UART_GET_INT_STATUS(port);
-+		} while (status);
-+	}
-+
-+		status = 0;
-+        status |= (IRQ_LPC_MASK);
-+        *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = status;
-+
-+	//cnt=0;
-+	//do{
-+	//	data = LPC_SERIAL_IRQ_STATUS;
-+		LPC_SERIAL_IRQ_STATUS = data;
-+	//	cnt++;
-+	//}while(data);
-+	//if(cnt>2)
-+	//	printf("it8712_uart_Isr clear LPC_SERIAL_IRQ_STATUS %x \n", cnt);
-+        return IRQ_HANDLED;
-+}
-+
-+static u_int it8712_tx_empty(struct uart_port *port)
-+{
-+//        printk("it8712 tx empty : \n");
-+
-+	return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
-+}
-+
-+static u_int it8712_get_mctrl(struct uart_port *port)
-+{
-+	unsigned int result = 0;
-+	unsigned int status;
-+
-+//        printk("it8712 get mctrl : \n");
-+
-+	status = UART_GET_MSR(port);
-+	if (status & UART_MSR_DCD)
-+		result |= TIOCM_CAR;
-+	if (status & UART_MSR_DSR)
-+		result |= TIOCM_DSR;
-+	if (status & UART_MSR_CTS)
-+		result |= TIOCM_CTS;
-+	if (status & UART_MSR_RI)
-+		result |= TIOCM_RI;
-+
-+	return result;
-+}
-+
-+static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
-+{
-+}
-+
-+static void it8712_break_ctl(struct uart_port *port, int break_state)
-+{
-+	unsigned int lcr;
-+
-+//        printk("it8712 break ctl : \n");
-+
-+	lcr = UART_GET_LCR(port);
-+	if (break_state == -1)
-+		lcr |= UART_LCR_SBC;
-+	else
-+		lcr &= ~UART_LCR_SBC;
-+	UART_PUT_LCR(port, lcr);
-+}
-+
-+static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
-+{
-+	u_int quot;
-+
-+	/* Special case: B0 rate */
-+	if (!baud)
-+		baud = 9600;
-+
-+	quot = (port->uartclk/(16 * baud)) ;
-+
-+	return quot;
-+}
-+static void it8712_set_termios(struct uart_port *port, struct termios *termios,
-+                               struct termios *old)
-+{
-+	unsigned int  uart_mc, old_ier, baud, quot;
-+	unsigned long flags;
-+
-+        termios->c_cflag |= CREAD;
-+        termios->c_cflag |= CLOCAL;
-+#ifdef DEBUG
-+	printk("it8712_set_cflag(0x%x) called\n", cflag);
-+#endif
-+        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+        quot = uart_get_divisor(port, baud);
-+
-+	/* byte size and parity */
-+	switch (termios->c_cflag & CSIZE) {
-+	case CS5:
-+              uart_mc = UART_LCR_WLEN5;
-+              break;
-+	case CS6:
-+              uart_mc = UART_LCR_WLEN6;
-+              break;
-+	case CS7:
-+              uart_mc = UART_LCR_WLEN7;
-+              break;
-+	default: // CS8
-+              uart_mc = UART_LCR_WLEN8;
-+              break;
-+	}
-+
-+	if (termios->c_cflag & CSTOPB)
-+		uart_mc|= UART_LCR_STOP;
-+	if (termios->c_cflag & PARENB) {
-+		uart_mc |= UART_LCR_EVEN;
-+		if (!(termios->c_cflag & PARODD))
-+			uart_mc |= UART_LCR_ODD;
-+	}
-+
-+        spin_lock_irqsave(&port->lock, flags);
-+        /*
-+         * Update the per-port timeout
-+         */
-+        uart_update_timeout(port, termios->c_cflag, baud);
-+	port->read_status_mask = UART_LSR_OE;
-+	if (termios->c_iflag & INPCK)
-+		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (termios->c_iflag & (BRKINT | PARMRK))
-+		port->read_status_mask |= UART_LSR_BI;
-+
-+	/*
-+	 * Characters to ignore
-+	 */
-+	port->ignore_status_mask = 0;
-+	if (termios->c_iflag & IGNPAR)
-+		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (termios->c_iflag & IGNBRK) {
-+		port->ignore_status_mask |= UART_LSR_BI;
-+		/*
-+		 * If we're ignoring parity and break indicators,
-+		 * ignore overruns to (for real raw support).
-+		 */
-+		if (termios->c_iflag & IGNPAR)
-+			port->ignore_status_mask |= UART_LSR_OE;
-+	}
-+
-+	old_ier = UART_GET_IER(port);
-+
-+        if(UART_ENABLE_MS(port, termios->c_cflag))
-+             old_ier |= UART_IER_MSI;
-+
-+	/* Set baud rate */
-+	quot = quot / 13;
-+	UART_PUT_LCR(port, UART_LCR_DLAB);
-+	UART_PUT_DIV_LO(port, (quot & 0xff));
-+	UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
-+
-+	UART_PUT_LCR(port, uart_mc);
-+//	UART_PUT_LCR(port, 0x07); // ???? it is wired
-+        UART_PUT_MCR(port, 0x08);
-+        UART_PUT_FCR(port, 0x01);
-+	UART_PUT_IER(port, 0x07);
-+
-+	spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+static int it8712_startup(struct uart_port *port)
-+{
-+	int retval, i;
-+	unsigned int regs;
-+
-+        //printk("it8712 startup : \n");
-+
-+	/*
-+	 * Use iobase to store a pointer to info. We need this to start a
-+	 * transmission as the tranmittr interrupt is only generated on
-+	 * the transition to the idle state
-+	 */
-+
-+	//	regs = 0;
-+    //    regs |= (IRQ_LPC_MASK);
-+    //    *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+
-+	/*
-+	 * Allocate the IRQ
-+	 */
-+	retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", port);
-+	if (retval)
-+		return retval;
-+
-+	//printk("Init LPC int...........\n");
-+        /* setup interrupt controller  */
-+        regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_LPC_MASK);
-+        *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_LPC_MASK);
-+        *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_LPC_MASK);
-+
-+	LPC_SERIAL_IRQ_POLARITY = 0x10; //0x10; //0x02;
-+	LPC_SERIAL_IRQ_TRITYPE = 0x10; //0x10;//
-+	LPC_SERIAL_IRQ_ENABLE = 0x10;
-+
-+	LPC_BUS_CTRL = 0xc0;
-+	LPC_SERIAL_IRQ_CTRL = 0xc0;
-+	for(i=0;i<1000;i++) ;
-+	LPC_SERIAL_IRQ_CTRL = 0x80;
-+	/*
-+	 * Finally, enable interrupts. Use the TII interrupt to minimise
-+	 * the number of interrupts generated. If higher performance is
-+	 * needed, consider using the TI interrupt with a suitable FIFO
-+	 * threshold
-+	 */
-+	//UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
-+	UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI|UART_IER_RLSI));//middle
-+
-+	return 0;
-+}
-+
-+static void it8712_shutdown(struct uart_port *port)
-+{
-+        //printk("it8712 shutdown : \n");
-+
-+	/*
-+	 * disable all interrupts, disable the port
-+	 */
-+	UART_PUT_IER(port, 0x0);
-+
-+	/* disable break condition and fifos */
-+//	UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
-+
-+	/*
-+	 * Free the interrupt
-+	 */
-+	free_irq(port->irq, port);
-+}
-+
-+static const char *it8712_type(struct uart_port *port)
-+{
-+	return port->type == PORT_IT8712 ? "IT8712" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'
-+ */
-+static void it8712_release_port(struct uart_port *port)
-+{
-+//        printk("it8712 release port : \n");
-+
-+	release_mem_region(port->mapbase, UART_PORT_SIZE);
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'
-+ */
-+static int it8712_request_port(struct uart_port *port)
-+{
-+	return request_mem_region(port->mapbase, UART_PORT_SIZE,
-+				    "serial_it8712") != NULL ? 0 : -EBUSY;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void it8712_config_port(struct uart_port *port, int flags)
-+{
-+
-+	if (flags & UART_CONFIG_TYPE) {
-+		if (it8712_request_port(port) == 0)
-+			port->type = PORT_IT8712;
-+	}
-+}
-+
-+/*
-+ * verify the new serial_struct (for TIOCSSERIAL).
-+ */
-+static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+	int ret = 0;
-+
-+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
-+		ret = -EINVAL;
-+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
-+		ret = -EINVAL;
-+	if (ser->baud_base < 9600)
-+		ret = -EINVAL;
-+	return ret;
-+}
-+
-+static struct uart_ops it8712_pops = {
-+	.tx_empty	= it8712_tx_empty,
-+	.set_mctrl	= it8712_set_mctrl_null,
-+	.get_mctrl	= it8712_get_mctrl,
-+	.stop_tx	= it8712_stop_tx,
-+	.start_tx	= it8712_start_tx,
-+	.stop_rx	= it8712_stop_rx,
-+	.enable_ms	= it8712_enable_ms,
-+	.break_ctl	= it8712_break_ctl,
-+	.startup	= it8712_startup,
-+	.shutdown	= it8712_shutdown,
-+	.set_termios	= it8712_set_termios,
-+	.type		= it8712_type,
-+	.release_port	= it8712_release_port,
-+	.request_port	= it8712_request_port,
-+	.config_port	= it8712_config_port,
-+	.verify_port	= it8712_verify_port,
-+};
-+
-+#ifdef CONFIG_ARCH_SL2312
-+
-+static struct uart_port it8712_ports[UART_NR] = {
-+	{
-+		membase:	(void *)0,
-+		mapbase:	0,
-+		iotype:		SERIAL_IO_MEM,
-+		irq:		0,
-+		uartclk:	UART_CLK/2,
-+		fifosize:	16,
-+		ops:		&it8712_pops,
-+		flags:		ASYNC_BOOT_AUTOCONF,
-+	}
-+};
-+
-+#endif
-+
-+#ifdef CONFIG_SERIAL_IT8712_CONSOLE
-+#ifdef used_and_not_const_char_pointer
-+static int it8712_console_read(struct uart_port *port, char *s, u_int count)
-+{
-+	unsigned int status;
-+	int c;
-+#ifdef DEBUG
-+	printk("it8712_console_read() called\n");
-+#endif
-+
-+	c = 0;
-+	while (c < count) {
-+		status = UART_GET_LSR(port);
-+ 		if (UART_RX_DATA(status)) {
-+			*s++ = UART_GET_CHAR(port);
-+			c++;
-+		} else {
-+			// nothing more to get, return
-+			return c;
-+		}
-+	}
-+	// return the count
-+	return c;
-+}
-+#endif
-+static void it8712_console_write(struct console *co, const char *s, unsigned count)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+	struct uart_port *port = it8712_ports + co->index;
-+	unsigned int status, old_ies;
-+	int i;
-+
-+	/*
-+	 *	First save the CR then disable the interrupts
-+	 */
-+	old_ies = UART_GET_IER(port);
-+	//if(old_ies!=7)
-+	//{
-+	//
-+	//	printk("old_ies = %x\n",old_ies);
-+	//	old_ies = 7;
-+	//}
-+	UART_PUT_IER(port,0x0);
-+
-+	/*
-+	 *	Now, do each character
-+	 */
-+	for (i = 0; i < count; i++) {
-+		do {
-+			status = UART_GET_LSR(port);
-+		} while (!UART_TX_READY(status));
-+		UART_PUT_CHAR(port, s[i]);
-+		if (s[i] == '\n') {
-+			do {
-+				status = UART_GET_LSR(port);
-+			} while (!UART_TX_READY(status));
-+			UART_PUT_CHAR(port, '\r');
-+		}
-+	}
-+
-+	/*
-+	 *	Finally, wait for transmitter to become empty
-+	 *	and restore the IES
-+	 */
-+	do {
-+		status = UART_GET_LSR(port);
-+	} while (!(status&UART_LSR_THRE));
-+	UART_PUT_IER(port, old_ies);
-+#endif
-+}
-+
-+static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-+{
-+	//printk("it8712 console get options : \n");
-+
-+	u_int uart_mc, quot;
-+	uart_mc= UART_GET_MCR(port);
-+
-+	*parity = 'n';
-+	if (uart_mc & UART_LCR_PARITY) {
-+		if (uart_mc & UART_LCR_EVEN)
-+			*parity = 'e';
-+		else
-+			*parity = 'o';
-+	}
-+
-+	switch (uart_mc & UART_LCR_MSK){
-+
-+	case UART_LCR_WLEN5:
-+		*bits = 5;
-+		break;
-+	case UART_LCR_WLEN6:
-+		*bits = 6;
-+		break;
-+	case UART_LCR_WLEN7:
-+		*bits = 7;
-+		break;
-+	case UART_LCR_WLEN8:
-+		*bits = 8;
-+		break;
-+	}
-+	UART_PUT_MCR(port,UART_LCR_DLAB);
-+	quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
-+	UART_PUT_MCR(port,uart_mc);
-+	*baud = (port->uartclk / (16 *quot));
-+}
-+
-+static int __init it8712_console_setup(struct console *co, char *options)
-+{
-+	struct uart_port *port;
-+	int baud = 38400;
-+	int bits = 8;
-+	int parity = 'n';
-+	int flow= 'n';
-+	int base;//, irq;
-+	int i ;
-+
-+	printk("it8712 console setup : \n");
-+
-+	LPCSetConfig(0, 0x02, 0x01);
-+        LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
-+        LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
-+	base = IT8712_IO_BASE;
-+	base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
-+	it8712_ports[0].mapbase = base;
-+	it8712_ports[0].membase = (void *)IO_ADDRESS(base);
-+	it8712_ports[0].irq = IRQ_LPC_OFFSET;
-+    //   	irq = LPCGetConfig(LDN_SERIAL1, 0x70);
-+	//it8712_ports[0].irq += irq;
-+
-+	//printk("it8712 irq is %x \n", it8712_ports[0].irq);
-+
-+	// setup LPC Host 'quiet mode'
-+	//*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
-+	//for(i=0;i<1000;i++) ;						// delay
-+	//*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
-+	LPC_BUS_CTRL = 0xc0;
-+	LPC_SERIAL_IRQ_CTRL = 0xc0;
-+	for(i=0;i<1000;i++) ;
-+	LPC_SERIAL_IRQ_CTRL = 0x80;
-+
-+#ifdef CONFIG_ARCH_SL2312
-+	/*
-+	 * Check whether an invalid uart number has been specified, and
-+	 * if so, search for the first available port that does have
-+	 * console support.
-+	 */
-+	port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
-+#else
-+	return -ENODEV;
-+#endif
-+
-+	if (options)
-+		uart_parse_options(options, &baud, &parity, &bits, &flow);
-+	else
-+		it8712_console_get_options(port, &baud, &parity, &bits);
-+
-+	return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+extern struct uart_driver it8712_reg;
-+static struct console it8712_console = {
-+	.name           = SERIAL_IT8712_NAME,
-+	.write		= it8712_console_write,
-+	.device		= uart_console_device,
-+        .setup          = it8712_console_setup,
-+	.flags		= CON_PRINTBUFFER,
-+	.index		= 0,
-+        .data           = &it8712_reg,
-+};
-+
-+static int __init it8712_console_init(void)
-+{
-+	register_console(&it8712_console);
-+        return 0;
-+}
-+
-+console_initcall(it8712_console_init);
-+
-+#define IT8712_CONSOLE	&it8712_console
-+#else
-+#define IT8712_CONSOLE	NULL
-+#endif
-+
-+static struct uart_driver it8712_reg = {
-+	.owner                  = NULL,
-+	.driver_name		= SERIAL_IT8712_NAME,
-+	.dev_name		= SERIAL_IT8712_NAME,
-+        .major                  = SERIAL_IT8712_MAJOR,
-+	.minor			= SERIAL_IT8712_MINOR,
-+	.nr			= UART_NR,
-+	.cons			= IT8712_CONSOLE,
-+};
-+
-+static int __init it8712_init(void)
-+{
-+        int result;
-+	//printk("serial_it8712: it871212_init \n");
-+
-+
-+        result = uart_register_driver(&it8712_reg);
-+        if(result)
-+             return result;
-+	result = uart_add_one_port(&it8712_reg, &it8712_ports[0]);
-+
-+        return result;
-+
-+}
-+
-+
-+__initcall(it8712_init);
---- /dev/null
-+++ b/drivers/serial/it8712.h
-@@ -0,0 +1,135 @@
-+#define UART_RX		0	/* In:  Receive buffer (DLAB=0) */
-+#define UART_TX		0	/* Out: Transmit buffer (DLAB=0) */
-+#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
-+#define UART_TRG	0	/* (LCR=BF) FCTR bit 7 selects Rx or Tx
-+				 * In: Fifo count
-+				 * Out: Fifo custom trigger levels
-+				 * XR16C85x only */
-+
-+#define UART_DLM	1	/* Out: Divisor Latch High (DLAB=1) */
-+#define UART_IER	1	/* Out: Interrupt Enable Register */
-+#define UART_FCTR	1	/* (LCR=BF) Feature Control Register
-+				 * XR16C85x only */
-+
-+#define UART_IIR	2	/* In:  Interrupt ID Register */
-+#define UART_FCR	2	/* Out: FIFO Control Register */
-+#define UART_EFR	2	/* I/O: Extended Features Register */
-+				/* (DLAB=1, 16C660 only) */
-+
-+#define UART_LCR	3	/* Out: Line Control Register */
-+#define UART_MCR	4	/* Out: Modem Control Register */
-+#define UART_LSR	5	/* In:  Line Status Register */
-+#define UART_MSR	6	/* In:  Modem Status Register */
-+#define UART_SCR	7	/* I/O: Scratch Register */
-+#define UART_EMSR	7	/* (LCR=BF) Extended Mode Select Register
-+				 * FCTR bit 6 selects SCR or EMSR
-+				 * XR16c85x only */
-+
-+/*
-+ * These are the definitions for the FIFO Control Register
-+ * (16650 only)
-+ */
-+#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
-+#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
-+#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
-+#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
-+#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
-+#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
-+#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
-+#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
-+#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
-+/* 16650 redefinitions */
-+#define UART_FCR6_R_TRIGGER_8	0x00 /* Mask for receive trigger set at 1 */
-+#define UART_FCR6_R_TRIGGER_16	0x40 /* Mask for receive trigger set at 4 */
-+#define UART_FCR6_R_TRIGGER_24  0x80 /* Mask for receive trigger set at 8 */
-+#define UART_FCR6_R_TRIGGER_28	0xC0 /* Mask for receive trigger set at 14 */
-+#define UART_FCR6_T_TRIGGER_16	0x00 /* Mask for transmit trigger set at 16 */
-+#define UART_FCR6_T_TRIGGER_8	0x10 /* Mask for transmit trigger set at 8 */
-+#define UART_FCR6_T_TRIGGER_24  0x20 /* Mask for transmit trigger set at 24 */
-+#define UART_FCR6_T_TRIGGER_30	0x30 /* Mask for transmit trigger set at 30 */
-+/* TI 16750 definitions */
-+#define UART_FCR7_64BYTE	0x20 /* Go into 64 byte mode */
-+
-+/*
-+ * These are the definitions for the Line Control Register
-+ *
-+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
-+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
-+ */
-+#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
-+#define UART_LCR_SBC	0x40	/* Set break control */
-+#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
-+#define UART_LCR_EPAR	0x10	/* Even parity select */
-+#define UART_LCR_PARITY	0x08	/* Parity Enable */
-+#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-+#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
-+#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
-+#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
-+#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
-+#define UART_LCR_EVEN   0x18    /* Even parity */
-+#define UART_LCR_ODD    0x08    /* Odd parity */
-+#define UART_LCR_MSK    0x03
-+/*
-+ * These are the definitions for the Line Status Register
-+ */
-+#define UART_LSR_DE     0x80    /* FIFO Data Error */
-+#define UART_LSR_TEMT	0x40	/* Transmitter empty */
-+#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
-+#define UART_LSR_BI	0x10	/* Break interrupt indicator */
-+#define UART_LSR_FE	0x08	/* Frame error indicator */
-+#define UART_LSR_PE	0x04	/* Parity error indicator */
-+#define UART_LSR_OE	0x02	/* Overrun error indicator */
-+#define UART_LSR_DR	0x01	/* Receiver data ready */
-+
-+/*
-+ * These are the definitions for the Interrupt Identification Register
-+ */
-+#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
-+#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
-+
-+#define UART_IIR_MSI	0x00	/* Modem status interrupt */
-+#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
-+#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
-+#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
-+#define UART_IIR_RCTO	0x0c	/* Receiver character timeout interrupt */
-+/*
-+ * These are the definitions for the Interrupt Enable Register
-+ */
-+#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
-+#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
-+#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
-+#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
-+/*
-+ * Sleep mode for ST16650 and TI16750.
-+ * Note that for 16650, EFR-bit 4 must be selected as well.
-+ */
-+#define UART_IERX_SLEEP  0x10	/* Enable sleep mode */
-+
-+/*
-+ * These are the definitions for the Modem Control Register
-+ */
-+#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
-+#define UART_MCR_OUT2	0x08	/* Out2 complement */
-+#define UART_MCR_OUT1	0x04	/* Out1 complement */
-+#define UART_MCR_RTS	0x02	/* RTS complement */
-+#define UART_MCR_DTR	0x01	/* DTR complement */
-+
-+/*
-+ * These are the definitions for the Modem Status Register
-+ */
-+#define UART_MSR_DCD	0x80	/* Data Carrier Detect */
-+#define UART_MSR_RI	0x40	/* Ring Indicator */
-+#define UART_MSR_DSR	0x20	/* Data Set Ready */
-+#define UART_MSR_CTS	0x10	/* Clear to Send */
-+#define UART_MSR_DDCD	0x08	/* Delta DCD */
-+#define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
-+#define UART_MSR_DDSR	0x02	/* Delta DSR */
-+#define UART_MSR_DCTS	0x01	/* Delta CTS */
-+#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
-+
-+#define UART_PARITY_NONE	0x00
-+#define UART_PARITY_ODD		0x01
-+#define UART_PARITY_EVEN	0x02
-+
-+
-+
---- /dev/null
-+++ b/drivers/serial/serial_it8712.c
-@@ -0,0 +1,876 @@
-+/*
-+ *  linux/drivers/char/serial_uart00.c
-+ *
-+ *  Driver for UART00 serial ports
-+ *
-+ *  Based on drivers/char/serial_amba.c, by ARM Limited &
-+ *                                          Deep Blue Solutions Ltd.
-+ *  Copyright 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *  $Id: serial_it8712.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
-+ *
-+ */
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "serial_it8712.h"
-+
-+//#define DEBUG           1
-+#define UART_NR		1
-+
-+#define SERIAL_IT8712_NAME	"ttySI"
-+#define SERIAL_IT8712_MAJOR	204
-+#define SERIAL_IT8712_MINOR	41      /* Temporary - will change in future */
-+#define SERIAL_IT8712_NR	UART_NR
-+#define UART_PORT_SIZE 0x50
-+
-+#define CALLOUT_IT8712_NAME	"cuaslI"
-+#define CALLOUT_IT8712_MAJOR	205
-+#define CALLOUT_IT8712_MINOR	41      /* Temporary - will change in future */
-+#define CALLOUT_IT8712_NR	UART_NR
-+#define LPC_HOST_CONTINUE_MODE	0x00000040
-+
-+#define IT8712_NO_PORTS         UART_NR
-+
-+static struct tty_driver normal, callout;
-+static struct tty_struct *it8712_table[UART_NR];
-+static struct termios *it8712_termios[UART_NR], *it8712_termios_locked[UART_NR];
-+static struct console it8712_console;
-+
-+#define IT8712_ISR_PASS_LIMIT	256
-+
-+/*
-+ * Access macros for the SL2312 UARTs
-+ */
-+#define UART_GET_INT_STATUS(p)	(inb(((p)->membase+UART_IIR)) & 0x0F)  // interrupt identification
-+#define UART_PUT_IER(p, c)      outb(c,((p)->membase+UART_IER))         // interrupt enable
-+#define UART_GET_IER(p)         inb(((p)->membase+UART_IER))
-+#define UART_PUT_CHAR(p, c)     outb(c,((p)->membase+UART_TX))         // transmitter holding
-+#define UART_GET_CHAR(p)        inb(((p)->membase+UART_RX))            // receive buffer
-+#define UART_GET_LSR(p)         inb(((p)->membase+UART_LSR))            // line status
-+#define UART_GET_MSR(p)         inb(((p)->membase+UART_MSR))            // modem status
-+#define UART_GET_MCR(p)         inb(((p)->membase+UART_MCR))            // modem control
-+#define UART_PUT_MCR(p, c)      outb(c,((p)->membase+UART_MCR))
-+#define UART_GET_LCR(p)         inb(((p)->membase+UART_LCR))       // mode control
-+#define UART_PUT_LCR(p, c)      outb(c,((p)->membase+UART_LCR))
-+#define UART_PUT_FCR(p, c)      outb(c,((p)->membase+UART_FCR))       // fifo control
-+#define UART_GET_DIV_HI(p)	inb(((p)->membase+UART_DLM))
-+#define UART_PUT_DIV_HI(p, c)	outb(c,((p)->membase+UART_DLM))
-+#define UART_GET_DIV_LO(p)	inb(((p)->membase+UART_DLL))
-+#define UART_PUT_DIV_LO(p, c)	outb(c,((p)->membase+UART_DLL))
-+#define UART_PUT_MDR(p, c)      outb(c,UART_MDR((p)->membase))
-+#define UART_RX_DATA(s)		((s) & UART_LSR_DR)
-+#define UART_TX_READY(s)	((s) & UART_LSR_THRE)
-+
-+static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
-+{
-+        unsigned int reg;
-+
-+//        printk("it8712 stop tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_THRI);
-+	UART_PUT_IER(port, reg);
-+}
-+
-+static void it8712_stop_rx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("it8712 stop rx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_RDI);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void it8712_enable_ms(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("it8712 enable ms : \n");
-+
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_MSI);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void
-+it8712_rx_chars(struct uart_info *info, struct pt_regs *regs)
-+{
-+	struct tty_struct *tty = info->tty;
-+	unsigned int status, mask, ch, flg, ignored = 0;
-+	struct uart_port *port = info->port;
-+
-+ //       printk("it8712_rx_chars : \n");
-+	status = UART_GET_LSR(port);
-+	while (UART_RX_DATA(status)) {
-+
-+		/*
-+		 * We need to read rds before reading the
-+		 * character from the fifo
-+		 */
-+		ch = UART_GET_CHAR(port);
-+		port->icount.rx++;
-+
-+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+			goto ignore_char;
-+
-+		flg = TTY_NORMAL;
-+
-+		/*
-+		 * Note that the error handling code is
-+		 * out of the main execution path
-+		 */
-+
-+		if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
-+			goto handle_error;
-+		if (uart_handle_sysrq_char(info, ch, regs))
-+			goto ignore_char;
-+
-+	error_return:
-+		*tty->flip.flag_buf_ptr++ = flg;
-+		*tty->flip.char_buf_ptr++ = ch;
-+		tty->flip.count++;
-+	ignore_char:
-+		status = UART_GET_LSR(port);
-+	} // end of while
-+out:
-+	tty_flip_buffer_push(tty);
-+	return;
-+
-+handle_error:
-+	if (status & UART_LSR_BI) {
-+		status &= ~(UART_LSR_FE);
-+		port->icount.brk++;
-+
-+#ifdef SUPPORT_SYSRQ
-+		if (uart_handle_break(info, &it8712_console))
-+			goto ignore_char;
-+#endif
-+	} else if (status & UART_LSR_PE)
-+		port->icount.parity++;
-+	else if (status & UART_LSR_FE)
-+		port->icount.frame++;
-+
-+	if (status & UART_LSR_OE)
-+		port->icount.overrun++;
-+
-+	if (status & port->ignore_status_mask) {
-+		if (++ignored > 100)
-+			goto out;
-+		goto ignore_char;
-+	}
-+
-+	mask = status & port->read_status_mask;
-+
-+	if (mask & UART_LSR_BI)
-+		flg = TTY_BREAK;
-+	else if (mask & UART_LSR_PE)
-+		flg = TTY_PARITY;
-+	else if (mask & UART_LSR_FE)
-+		flg = TTY_FRAME;
-+
-+	if (status & UART_LSR_OE) {
-+		/*
-+		 * CHECK: does overrun affect the current character?
-+		 * ASSUMPTION: it does not.
-+		 */
-+		*tty->flip.flag_buf_ptr++ = flg;
-+		*tty->flip.char_buf_ptr++ = ch;
-+		tty->flip.count++;
-+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+			goto ignore_char;
-+		ch = 0;
-+		flg = TTY_OVERRUN;
-+	}
-+#ifdef SUPPORT_SYSRQ
-+	info->sysrq = 0;
-+#endif
-+	goto error_return;
-+}
-+
-+static void it8712_tx_chars(struct uart_info *info)
-+{
-+	int count;
-+	struct uart_port *port=info->port;
-+
-+	if (port->x_char) {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, port->x_char);
-+		port->icount.tx++;
-+		port->x_char = 0;
-+
-+		return;
-+	}
-+	if (info->xmit.head == info->xmit.tail
-+	    || info->tty->stopped
-+	    || info->tty->hw_stopped) {
-+		it8712_stop_tx(info->port, 0);
-+		return;
-+	}
-+
-+	count = port->fifosize >> 1;
-+	do {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, info->xmit.buf[info->xmit.tail]);
-+		info->xmit.tail = (info->xmit.tail + 1) & (UART_XMIT_SIZE - 1);
-+		port->icount.tx++;
-+		if (info->xmit.head == info->xmit.tail)
-+			break;
-+	} while (--count > 0);
-+
-+	if (CIRC_CNT(info->xmit.head,
-+		     info->xmit.tail,
-+		     UART_XMIT_SIZE) < WAKEUP_CHARS)
-+		uart_event(info, EVT_WRITE_WAKEUP);
-+
-+	if (info->xmit.head == info->xmit.tail)
-+		it8712_stop_tx(info->port, 0);
-+}
-+
-+static void it8712_start_tx(struct uart_port *port, u_int nonempty, u_int from_tty)
-+{
-+        unsigned int reg;
-+	struct uart_info *info=(struct uart_info*)(port->iobase);
-+
-+//        printk("it8712 start tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_THRI);
-+	UART_PUT_IER(port, reg);
-+	it8712_tx_chars(info);
-+}
-+
-+static void it8712_modem_status(struct uart_info *info)
-+{
-+	unsigned int status;
-+	struct uart_icount *icount = &info->port->icount;
-+
-+//        printk("it8712 modem status : \n");
-+
-+	status = UART_GET_MSR(info->port);
-+
-+	if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
-+		       UART_MSR_TERI | UART_MSR_DDCD)))
-+		return;
-+
-+	if (status & UART_MSR_DCD) {
-+		icount->dcd++;
-+#ifdef CONFIG_HARD_PPS
-+		if ((info->flags & ASYNC_HARDPPS_CD) &&
-+		    (status & UART_MSR_DCD_MSK))
-+			hardpps();
-+#endif
-+		if (info->flags & ASYNC_CHECK_CD) {
-+			if (status & UART_MSR_DCD)
-+				wake_up_interruptible(&info->open_wait);
-+			else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-+				   (info->flags & ASYNC_CALLOUT_NOHUP))) {
-+				if (info->tty)
-+					tty_hangup(info->tty);
-+			}
-+		}
-+	}
-+
-+	if (status & UART_MSR_DDSR)
-+		icount->dsr++;
-+
-+	if (status & UART_MSR_DCTS) {
-+		icount->cts++;
-+
-+		if (info->flags & ASYNC_CTS_FLOW) {
-+			status &= UART_MSR_CTS;
-+
-+			if (info->tty->hw_stopped) {
-+				if (status) {
-+					info->tty->hw_stopped = 0;
-+					info->ops->start_tx(info->port, 1, 0);
-+					uart_event(info, EVT_WRITE_WAKEUP);
-+				}
-+			} else {
-+				if (!status) {
-+					info->tty->hw_stopped = 1;
-+					info->ops->stop_tx(info->port, 0);
-+				}
-+			}
-+		}
-+	}
-+	wake_up_interruptible(&info->delta_msr_wait);
-+
-+}
-+
-+static void it8712_int(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct uart_info *info = dev_id;
-+	unsigned int status, pass_counter = 0;
-+
-+	status = UART_GET_INT_STATUS(info->port);
-+	do {
-+//		     printk("it8712_int: status %x \n", status);
-+		switch(status)
-+		{
-+		   case UART_IIR_RDI:
-+		   case UART_IIR_RLSI:
-+		   case UART_IIR_RCTO:
-+			it8712_rx_chars(info, regs);
-+		   break;
-+		   case UART_IIR_THRI:
-+			it8712_tx_chars(info);
-+		   break;
-+		   case UART_IIR_MSI:
-+			it8712_modem_status(info);
-+		   break;
-+		   default:
-+		   break;
-+		}
-+		if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
-+			break;
-+
-+		status = UART_GET_INT_STATUS(info->port);
-+	} while (status);
-+}
-+
-+static u_int it8712_tx_empty(struct uart_port *port)
-+{
-+//        printk("it8712 tx empty : \n");
-+
-+	return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
-+}
-+
-+static u_int it8712_get_mctrl(struct uart_port *port)
-+{
-+	unsigned int result = 0;
-+	unsigned int status;
-+
-+//        printk("it8712 get mctrl : \n");
-+
-+	status = UART_GET_MSR(port);
-+	if (status & UART_MSR_DCD)
-+		result |= TIOCM_CAR;
-+	if (status & UART_MSR_DSR)
-+		result |= TIOCM_DSR;
-+	if (status & UART_MSR_CTS)
-+		result |= TIOCM_CTS;
-+	if (status & UART_MSR_RI)
-+		result |= TIOCM_RI;
-+
-+	return result;
-+}
-+
-+static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
-+{
-+}
-+
-+static void it8712_break_ctl(struct uart_port *port, int break_state)
-+{
-+	unsigned int lcr;
-+
-+//        printk("it8712 break ctl : \n");
-+
-+	lcr = UART_GET_LCR(port);
-+	if (break_state == -1)
-+		lcr |= UART_LCR_SBC;
-+	else
-+		lcr &= ~UART_LCR_SBC;
-+	UART_PUT_LCR(port, lcr);
-+}
-+
-+static inline u_int uart_calculate_quot(struct uart_info *info, u_int baud)
-+{
-+	u_int quot;
-+
-+	/* Special case: B0 rate */
-+	if (!baud)
-+		baud = 9600;
-+
-+	quot = (info->port->uartclk/(16 * baud)) ;
-+
-+	return quot;
-+}
-+static void it8712_change_speed(struct uart_port *port, u_int cflag, u_int iflag, u_int quot)
-+{
-+	u_int uart_mc=0, old_ier;
-+	unsigned long flags;
-+
-+#ifdef DEBUG
-+	printk("it8712_set_cflag(0x%x) called\n", cflag);
-+#endif
-+
-+
-+	/* byte size and parity */
-+	switch (cflag & CSIZE) {
-+	case CS5: uart_mc = UART_LCR_WLEN5; break;
-+	case CS6: uart_mc = UART_LCR_WLEN6; break;
-+	case CS7: uart_mc = UART_LCR_WLEN7; break;
-+	default:  uart_mc = UART_LCR_WLEN8; break; // CS8
-+	}
-+	if (cflag & CSTOPB)
-+		uart_mc|= UART_LCR_STOP;
-+	if (cflag & PARENB) {
-+		uart_mc |= UART_LCR_EVEN;
-+		if (!(cflag & PARODD))
-+			uart_mc |= UART_LCR_ODD;
-+	}
-+
-+	port->read_status_mask = UART_LSR_OE;
-+	if (iflag & INPCK)
-+		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (iflag & (BRKINT | PARMRK))
-+		port->read_status_mask |= UART_LSR_BI;
-+
-+	/*
-+	 * Characters to ignore
-+	 */
-+	port->ignore_status_mask = 0;
-+	if (iflag & IGNPAR)
-+		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (iflag & IGNBRK) {
-+		port->ignore_status_mask |= UART_LSR_BI;
-+		/*
-+		 * If we're ignoring parity and break indicators,
-+		 * ignore overruns to (for real raw support).
-+		 */
-+		if (iflag & IGNPAR)
-+			port->ignore_status_mask |= UART_LSR_OE;
-+	}
-+
-+	/* first, disable everything */
-+	save_flags(flags); cli();
-+	old_ier = UART_GET_IER(port);
-+
-+	if ((port->flags & ASYNC_HARDPPS_CD) ||
-+	    (cflag & CRTSCTS) || !(cflag & CLOCAL))
-+		old_ier |= UART_IER_MSI;
-+
-+	/* Set baud rate */
-+	quot = quot / 13;
-+	UART_PUT_LCR(port, UART_LCR_DLAB);
-+	UART_PUT_DIV_LO(port, (quot & 0xff));
-+	UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
-+
-+	UART_PUT_LCR(port, uart_mc);
-+//	UART_PUT_LCR(port, 0x07); // ???? it is wired
-+        UART_PUT_MCR(port, 0x08);
-+        UART_PUT_FCR(port, 0x01);
-+	UART_PUT_IER(port, 0x05);
-+
-+	restore_flags(flags);
-+}
-+
-+static int it8712_startup(struct uart_port *port, struct uart_info *info)
-+{
-+	int retval;
-+	unsigned int regs;
-+
-+//        printk("it8712 startup : \n");
-+
-+	/*
-+	 * Use iobase to store a pointer to info. We need this to start a
-+	 * transmission as the tranmittr interrupt is only generated on
-+	 * the transition to the idle state
-+	 */
-+
-+	port->iobase=(u_int)info;
-+
-+	/*
-+	 * Allocate the IRQ
-+	 */
-+	retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", info);
-+	if (retval)
-+		return retval;
-+
-+        /* setup interrupt controller  */
-+        regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs |= (IRQ_SERIRQ0_MASK);
-+        *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        regs = *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_SERIRQ0_MASK);
-+        *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_SERIRQ0_MASK);
-+
-+	/*
-+	 * Finally, enable interrupts. Use the TII interrupt to minimise
-+	 * the number of interrupts generated. If higher performance is
-+	 * needed, consider using the TI interrupt with a suitable FIFO
-+	 * threshold
-+	 */
-+	UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
-+
-+	return 0;
-+}
-+
-+static void it8712_shutdown(struct uart_port *port, struct uart_info *info)
-+{
-+//        printk("it8712 shutdown : \n");
-+
-+	/*
-+	 * disable all interrupts, disable the port
-+	 */
-+	UART_PUT_IER(port, 0x0);
-+
-+	/* disable break condition and fifos */
-+//	UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
-+
-+	/*
-+	 * Free the interrupt
-+	 */
-+	free_irq(port->irq, info);
-+}
-+
-+static const char *it8712_type(struct uart_port *port)
-+{
-+	return port->type == PORT_IT8712 ? "IT8712" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'
-+ */
-+static void it8712_release_port(struct uart_port *port)
-+{
-+//        printk("it8712 release port : \n");
-+
-+	release_mem_region(port->mapbase, UART_PORT_SIZE);
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'
-+ */
-+static int it8712_request_port(struct uart_port *port)
-+{
-+	return request_mem_region(port->mapbase, UART_PORT_SIZE,
-+				    "serial_it8712") != NULL ? 0 : -EBUSY;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void it8712_config_port(struct uart_port *port, int flags)
-+{
-+
-+	if (flags & UART_CONFIG_TYPE) {
-+		if (it8712_request_port(port) == 0)
-+			port->type = PORT_IT8712;
-+	}
-+}
-+
-+/*
-+ * verify the new serial_struct (for TIOCSSERIAL).
-+ */
-+static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+	int ret = 0;
-+
-+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
-+		ret = -EINVAL;
-+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
-+		ret = -EINVAL;
-+	if (ser->baud_base < 9600)
-+		ret = -EINVAL;
-+	return ret;
-+}
-+
-+static struct uart_ops it8712_pops = {
-+	tx_empty:	it8712_tx_empty,
-+	set_mctrl:	it8712_set_mctrl_null,
-+	get_mctrl:	it8712_get_mctrl,
-+	stop_tx:	it8712_stop_tx,
-+	start_tx:	it8712_start_tx,
-+	stop_rx:	it8712_stop_rx,
-+	enable_ms:	it8712_enable_ms,
-+	break_ctl:	it8712_break_ctl,
-+	startup:	it8712_startup,
-+	shutdown:	it8712_shutdown,
-+	change_speed:	it8712_change_speed,
-+	type:		it8712_type,
-+	release_port:	it8712_release_port,
-+	request_port:	it8712_request_port,
-+	config_port:	it8712_config_port,
-+	verify_port:	it8712_verify_port,
-+};
-+
-+#ifdef CONFIG_ARCH_SL2312
-+
-+static struct uart_port it8712_ports[UART_NR] = {
-+	{
-+		membase:	(void *)0,
-+		mapbase:	0,
-+		iotype:		SERIAL_IO_MEM,
-+		irq:		0,
-+		uartclk:	UART_CLK/2,
-+		fifosize:	16,
-+		ops:		&it8712_pops,
-+		flags:		ASYNC_BOOT_AUTOCONF,
-+	}
-+};
-+
-+#endif
-+
-+#ifdef CONFIG_SERIAL_IT8712_CONSOLE
-+#ifdef used_and_not_const_char_pointer
-+static int it8712_console_read(struct uart_port *port, char *s, u_int count)
-+{
-+	unsigned int status;
-+	int c;
-+#ifdef DEBUG
-+	printk("it8712_console_read() called\n");
-+#endif
-+
-+	c = 0;
-+	while (c < count) {
-+		status = UART_GET_LSR(port);
-+ 		if (UART_RX_DATA(status)) {
-+			*s++ = UART_GET_CHAR(port);
-+			c++;
-+		} else {
-+			// nothing more to get, return
-+			return c;
-+		}
-+	}
-+	// return the count
-+	return c;
-+}
-+#endif
-+static void it8712_console_write(struct console *co, const char *s, unsigned count)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+	struct uart_port *port = it8712_ports + co->index;
-+	unsigned int status, old_ies;
-+	int i;
-+
-+	/*
-+	 *	First save the CR then disable the interrupts
-+	 */
-+	old_ies = UART_GET_IER(port);
-+	UART_PUT_IER(port,0x0);
-+
-+	/*
-+	 *	Now, do each character
-+	 */
-+	for (i = 0; i < count; i++) {
-+		do {
-+			status = UART_GET_LSR(port);
-+		} while (!UART_TX_READY(status));
-+		UART_PUT_CHAR(port, s[i]);
-+		if (s[i] == '\n') {
-+			do {
-+				status = UART_GET_LSR(port);
-+			} while (!UART_TX_READY(status));
-+			UART_PUT_CHAR(port, '\r');
-+		}
-+	}
-+
-+	/*
-+	 *	Finally, wait for transmitter to become empty
-+	 *	and restore the IES
-+	 */
-+	do {
-+		status = UART_GET_LSR(port);
-+	} while (!(status&UART_LSR_THRE));
-+	UART_PUT_IER(port, old_ies);
-+#endif
-+}
-+
-+static kdev_t it8712_console_device(struct console *co)
-+{
-+	return MKDEV(SERIAL_IT8712_MAJOR, SERIAL_IT8712_MINOR + co->index);
-+}
-+
-+static int it8712_console_wait_key(struct console *co)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+	struct uart_port *port = (it8712_ports + co->index);
-+	unsigned int status;
-+
-+	do {
-+		status = UART_GET_LSR(port);
-+	} while (!UART_RX_DATA(status));
-+	return UART_GET_CHAR(port);
-+#else
-+	return 0;
-+#endif
-+}
-+
-+static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-+{
-+	printk("it8712 console get options : \n");
-+
-+	u_int uart_mc, quot;
-+	uart_mc= UART_GET_MCR(port);
-+
-+	*parity = 'n';
-+	if (uart_mc & UART_LCR_PARITY) {
-+		if (uart_mc & UART_LCR_EVEN)
-+			*parity = 'e';
-+		else
-+			*parity = 'o';
-+	}
-+
-+	switch (uart_mc & UART_LCR_MSK){
-+
-+	case UART_LCR_WLEN5:
-+		*bits = 5;
-+		break;
-+	case UART_LCR_WLEN6:
-+		*bits = 6;
-+		break;
-+	case UART_LCR_WLEN7:
-+		*bits = 7;
-+		break;
-+	case UART_LCR_WLEN8:
-+		*bits = 8;
-+		break;
-+	}
-+	UART_PUT_MCR(port,UART_LCR_DLAB);
-+	quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
-+	UART_PUT_MCR(port,uart_mc);
-+	*baud = (port->uartclk / (16 *quot));
-+}
-+
-+static int __init it8712_console_setup(struct console *co, char *options)
-+{
-+	struct uart_port *port;
-+	int baud = 38400;
-+	int bits = 8;
-+	int parity = 'n';
-+	int flow= 'n';
-+	int base, irq;
-+	int i ;
-+
-+//	printk("it8712 console setup : \n");
-+
-+	LPCSetConfig(0, 0x02, 0x01);
-+        LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
-+        LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
-+	base = IT8712_IO_BASE;
-+	base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
-+	it8712_ports[0].mapbase = base;
-+	it8712_ports[0].membase = IO_ADDRESS(base);
-+	it8712_ports[0].irq = IRQ_SERIRQ0_OFFSET;
-+       	irq = LPCGetConfig(LDN_SERIAL1, 0x70);
-+	it8712_ports[0].irq += irq;
-+
-+	printk("it8712 irq is %x %x \n", it8712_ports[0].irq, irq);
-+
-+	// setup LPC Host 'quiet mode'
-+	*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
-+	for(i=0;i<1000;i++) ;						// delay
-+	*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
-+
-+#ifdef CONFIG_ARCH_SL2312
-+	/*
-+	 * Check whether an invalid uart number has been specified, and
-+	 * if so, search for the first available port that does have
-+	 * console support.
-+	 */
-+	port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
-+#else
-+	return -ENODEV;
-+#endif
-+
-+	if (options)
-+		uart_parse_options(options, &baud, &parity, &bits, &flow);
-+	else
-+		it8712_console_get_options(port, &baud, &parity, &bits);
-+
-+	return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+static struct console it8712_console = {
-+	name:           SERIAL_IT8712_NAME,
-+	write:		it8712_console_write,
-+#ifdef used_and_not_const_char_pointer
-+	read:		it8712_console_read,
-+#endif
-+	device:		it8712_console_device,
-+//	wait_key:	it8712_console_wait_key,
-+	setup:		it8712_console_setup,
-+	flags:		(CON_PRINTBUFFER|CON_ENABLED),
-+	index:		-1,
-+};
-+
-+void __init it8712_console_init(void)
-+{
-+	register_console(&it8712_console);
-+}
-+
-+#define IT8712_CONSOLE	&it8712_console
-+#else
-+#define IT8712_CONSOLE	NULL
-+#endif
-+
-+static struct uart_driver it8712_reg = {
-+	owner:                  NULL,
-+	normal_major:		SERIAL_IT8712_MAJOR,
-+	normal_name:		SERIAL_IT8712_NAME,
-+	normal_driver:		&normal,
-+	callout_major:		CALLOUT_IT8712_MAJOR,
-+	callout_name:		CALLOUT_IT8712_NAME,
-+	callout_driver:		&callout,
-+	table:			it8712_table,
-+	termios:		it8712_termios,
-+	termios_locked:		it8712_termios_locked,
-+	minor:			SERIAL_IT8712_MINOR,
-+	nr:			UART_NR,
-+#ifdef CONFIG_ARCH_SL2312
-+	port:			it8712_ports,
-+#endif
-+	state:			NULL,
-+	cons:			IT8712_CONSOLE,
-+};
-+
-+static int __init it8712_init(void)
-+{
-+//	printk("serial_it8712: it871212_init \n");
-+
-+	return uart_register_driver(&it8712_reg);
-+}
-+
-+
-+__initcall(it8712_init);
---- /dev/null
-+++ b/drivers/serial/serial_sl2312.c
-@@ -0,0 +1,827 @@
-+/*
-+ *  linux/drivers/char/serial_uart00.c
-+ *
-+ *  Driver for UART00 serial ports
-+ *
-+ *  Based on drivers/char/serial_amba.c, by ARM Limited &
-+ *                                          Deep Blue Solutions Ltd.
-+ *  Copyright 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *  $Id: serial_sl2312.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
-+ *
-+ */
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+
-+#if defined(CONFIG_SERIAL_SL2312_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include 
-+#define UART_TYPE (volatile unsigned int*)
-+#include 
-+#include 
-+
-+// #define DEBUG           1
-+#define UART_NR		1
-+
-+
-+#define SERIAL_SL2312_NAME	"ttyS"
-+#define SERIAL_SL2312_MAJOR	204
-+#define SERIAL_SL2312_MINOR	40      /* Temporary - will change in future */
-+#define SERIAL_SL2312_NR	UART_NR
-+#define UART_PORT_SIZE 0x50
-+
-+#define SL2312_NO_PORTS         UART_NR
-+#define SL2312_ISR_PASS_LIMIT	256
-+
-+/*
-+ * Access macros for the SL2312 UARTs
-+ */
-+#define UART_GET_INT_STATUS(p)	(inl(UART_IIR((p)->membase)) & 0x0F)      // interrupt identification
-+#define UART_PUT_IER(p, c)      outl(c,UART_IER((p)->membase))    // interrupt enable
-+#define UART_GET_IER(p)         inl(UART_IER((p)->membase))
-+#define UART_PUT_CHAR(p, c)     outl(c,UART_THR((p)->membase))    // transmitter holding
-+#define UART_GET_CHAR(p)        inl(UART_RBR((p)->membase))       // receive buffer
-+#define UART_GET_LSR(p)         inl(UART_LSR((p)->membase))       // line status
-+#define UART_GET_MSR(p)         inl(UART_MSR((p)->membase))       // modem status
-+#define UART_GET_MCR(p)         inl(UART_MCR((p)->membase))       // modem control
-+#define UART_PUT_MCR(p, c)      outl(c,UART_MCR((p)->membase))
-+#define UART_GET_LCR(p)         inl(UART_LCR((p)->membase))       // mode control
-+#define UART_PUT_LCR(p, c)      outl(c,UART_LCR((p)->membase))
-+#define UART_GET_DIV_HI(p)	inl(UART_DIV_HI((p)->membase))
-+#define UART_PUT_DIV_HI(p, c)	outl(c,UART_DIV_HI((p)->membase))
-+#define UART_GET_DIV_LO(p)	inl(UART_DIV_LO((p)->membase))
-+#define UART_PUT_DIV_LO(p, c)	outl(c,UART_DIV_LO((p)->membase))
-+#define UART_PUT_MDR(p, c)      outl(c,UART_MDR((p)->membase))
-+#define UART_RX_DATA(s)		((s) & UART_LSR_DR)
-+#define UART_TX_READY(s)	((s) & UART_LSR_THRE)
-+
-+
-+static void sl2312_stop_tx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("sl2312 stop tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_TE);
-+	UART_PUT_IER(port, reg);
-+}
-+
-+static void sl2312_stop_rx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("sl2312 stop rx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_DR);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void sl2312_enable_ms(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("sl2312 enable ms : \n");
-+
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_MS);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void
-+sl2312_rx_chars(struct uart_port *port)
-+{
-+	struct tty_struct *tty = port->info->tty;
-+	unsigned int status, mask, ch, flg, ignored = 0;
-+
-+
-+ //       printk("sl2312_rx_chars : \n");
-+	status = UART_GET_LSR(port);
-+	while (UART_RX_DATA(status)) {
-+
-+		/*
-+		 * We need to read rds before reading the
-+		 * character from the fifo
-+		 */
-+		ch = UART_GET_CHAR(port);
-+		port->icount.rx++;
-+
-+		//if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+		if (tty && !tty_buffer_request_room(tty, 1))
-+			goto ignore_char;
-+
-+		flg = TTY_NORMAL;
-+
-+		/*
-+		 * Note that the error handling code is
-+		 * out of the main execution path
-+		 */
-+
-+		if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
-+			goto handle_error;
-+		if (uart_handle_sysrq_char(port, ch))
-+			goto ignore_char;
-+
-+	error_return:
-+		//*tty->flip.flag_buf_ptr++ = flg;
-+		//*tty->flip.char_buf_ptr++ = ch;
-+		//tty->flip.count++;
-+		tty_insert_flip_char(tty, ch, flg);
-+	ignore_char:
-+		status = UART_GET_LSR(port);
-+	} // end of while
-+out:
-+	tty_flip_buffer_push(tty);
-+	return;
-+
-+handle_error:
-+	if (status & UART_LSR_BI) {
-+		status &= ~(UART_LSR_FE);
-+		port->icount.brk++;
-+
-+#ifdef SUPPORT_SYSRQ
-+		if (uart_handle_break(port))
-+			goto ignore_char;
-+#endif
-+	} else if (status & UART_LSR_PE)
-+		port->icount.parity++;
-+	else if (status & UART_LSR_FE)
-+		port->icount.frame++;
-+
-+	if (status & UART_LSR_OE)
-+		port->icount.overrun++;
-+
-+	if (status & port->ignore_status_mask) {
-+		if (++ignored > 100)
-+			goto out;
-+		goto ignore_char;
-+	}
-+
-+	mask = status & port->read_status_mask;
-+
-+	if (mask & UART_LSR_BI)
-+		flg = TTY_BREAK;
-+	else if (mask & UART_LSR_PE)
-+		flg = TTY_PARITY;
-+	else if (mask & UART_LSR_FE)
-+		flg = TTY_FRAME;
-+
-+	if (status & UART_LSR_OE) {
-+		/*
-+		 * CHECK: does overrun affect the current character?
-+		 * ASSUMPTION: it does not.
-+		 */
-+		//*tty->flip.flag_buf_ptr++ = flg;
-+		//*tty->flip.char_buf_ptr++ = ch;
-+		//tty->flip.count++;
-+
-+		tty_insert_flip_char(tty, 0, TTY_BREAK);
-+
-+		// if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+		if (tty_buffer_request_room(tty, 1))
-+			goto ignore_char;
-+		ch = 0;
-+		flg = TTY_OVERRUN;
-+	}
-+#ifdef SUPPORT_SYSRQ
-+	port->sysrq = 0;
-+#endif
-+	goto error_return;
-+}
-+
-+static void sl2312_tx_chars(struct uart_port *port)
-+{
-+	struct circ_buf *xmit = &port->info->xmit;
-+	int count;
-+
-+
-+	if (port->x_char) {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, port->x_char);
-+		port->icount.tx++;
-+		port->x_char = 0;
-+
-+		return;
-+	}
-+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-+		sl2312_stop_tx(port);
-+
-+		return;
-+	}
-+
-+	count = port->fifosize >> 1;
-+	do {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
-+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-+		port->icount.tx++;
-+		if (uart_circ_empty(xmit))
-+			break;
-+	} while (--count > 0);
-+
-+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+		uart_write_wakeup(port);
-+
-+	if (uart_circ_empty(xmit))
-+		sl2312_stop_tx(port);
-+
-+}
-+
-+static void sl2312_start_tx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("sl2312 start tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_TE);
-+	UART_PUT_IER(port, reg);
-+
-+	sl2312_tx_chars(port);
-+}
-+
-+static void sl2312_modem_status(struct uart_port *port)
-+{
-+	unsigned int status;
-+
-+//        printk("it8712 modem status : \n");
-+
-+	status = UART_GET_MSR(port);
-+
-+	if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
-+		       UART_MSR_TERI | UART_MSR_DDCD)))
-+		return;
-+
-+        if (status & UART_MSR_DDCD)
-+                uart_handle_dcd_change(port, status & UART_MSR_DCD);
-+
-+        if (status & UART_MSR_DDSR)
-+                port->icount.dsr++;
-+
-+        if (status & UART_MSR_DCTS)
-+                uart_handle_cts_change(port, status & UART_MSR_CTS);
-+
-+	wake_up_interruptible(&port->info->delta_msr_wait);
-+
-+}
-+
-+static irqreturn_t sl2312_int(int irq, void *dev_id)
-+{
-+	struct uart_port *port = dev_id;
-+	unsigned int status, pass_counter = 0;
-+
-+	status = UART_GET_INT_STATUS(port);
-+	do {
-+		switch(status)
-+		{
-+		   case UART_IIR_DR:
-+		   case UART_IIR_RLS:
-+			sl2312_rx_chars(port);
-+		   break;
-+		   case UART_IIR_TE:
-+			sl2312_tx_chars(port);
-+		   break;
-+		   case UART_IIR_MODEM:
-+			sl2312_modem_status(port);
-+		   break;
-+		   default:
-+		   break;
-+		}
-+		if (pass_counter++ > SL2312_ISR_PASS_LIMIT)
-+			break;
-+
-+		status = UART_GET_INT_STATUS(port);
-+	} while (status);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static u_int sl2312_tx_empty(struct uart_port *port)
-+{
-+//        printk("sl2312 tx empty : \n");
-+
-+	return ((UART_GET_LSR(port) & UART_LSR_TE)? TIOCSER_TEMT : 0);
-+}
-+
-+static u_int sl2312_get_mctrl(struct uart_port *port)
-+{
-+	unsigned int result = 0;
-+	unsigned int status;
-+
-+//        printk("sl2312 get mctrl : \n");
-+
-+	status = UART_GET_MSR(port);
-+	if (status & UART_MSR_DCD)
-+		result |= TIOCM_CAR;
-+	if (status & UART_MSR_DSR)
-+		result |= TIOCM_DSR;
-+	if (status & UART_MSR_CTS)
-+		result |= TIOCM_CTS;
-+	if (status & UART_MSR_RI)
-+		result |= TIOCM_RI;
-+
-+	return result;
-+}
-+
-+static void sl2312_set_mctrl_null(struct uart_port *port, u_int mctrl)
-+{
-+}
-+
-+static void sl2312_break_ctl(struct uart_port *port, int break_state)
-+{
-+	unsigned int lcr;
-+
-+//        printk("sl2312 break ctl : \n");
-+
-+	lcr = UART_GET_LCR(port);
-+	if (break_state == -1)
-+		lcr |= UART_LCR_SETBREAK;
-+	else
-+		lcr &= ~UART_LCR_SETBREAK;
-+	UART_PUT_LCR(port, lcr);
-+}
-+
-+static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
-+{
-+	u_int quot;
-+
-+	/* Special case: B0 rate */
-+	if (!baud)
-+		baud = 9600;
-+
-+	quot = (port->uartclk / (16 * baud)-1)  ;
-+
-+	return quot;
-+}
-+
-+static void sl2312_set_termios(struct uart_port *port, struct ktermios *termios,
-+                               struct ktermios *old)
-+{
-+	unsigned int  uart_mc, old_ier, baud, quot;
-+	unsigned long flags;
-+
-+        termios->c_cflag |= CREAD;
-+#ifdef DEBUG
-+	printk("it8712_set_cflag(0x%x) called\n", cflag);
-+#endif
-+        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+        quot = (port->uartclk / (16 * baud))  ;
-+        //uart_get_divisor(port, baud);
-+
-+	/* byte size and parity */
-+	switch (termios->c_cflag & CSIZE) {
-+	case CS5:
-+              uart_mc = UART_LCR_LEN5;
-+              break;
-+	case CS6:
-+              uart_mc = UART_LCR_LEN6;
-+              break;
-+	case CS7:
-+              uart_mc = UART_LCR_LEN7;
-+              break;
-+	default: // CS8
-+              uart_mc = UART_LCR_LEN8;
-+              break;
-+	}
-+
-+	if (termios->c_cflag & CSTOPB)
-+		uart_mc|= UART_LCR_STOP;
-+	if (termios->c_cflag & PARENB) {
-+		uart_mc |= UART_LCR_EVEN;
-+		if (!(termios->c_cflag & PARODD))
-+			uart_mc |= UART_LCR_ODD;
-+	}
-+
-+    spin_lock_irqsave(&port->lock, flags);
-+        /*
-+         * Update the per-port timeout
-+         */
-+        uart_update_timeout(port, termios->c_cflag, baud);
-+	port->read_status_mask = UART_LSR_OE;
-+	if (termios->c_iflag & INPCK)
-+		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (termios->c_iflag & (BRKINT | PARMRK))
-+		port->read_status_mask |= UART_LSR_BI;
-+
-+	/*
-+	 * Characters to ignore
-+	 */
-+	port->ignore_status_mask = 0;
-+	if (termios->c_iflag & IGNPAR)
-+		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (termios->c_iflag & IGNBRK) {
-+		port->ignore_status_mask |= UART_LSR_BI;
-+		/*
-+		 * If we're ignoring parity and break indicators,
-+		 * ignore overruns to (for real raw support).
-+		 */
-+		if (termios->c_iflag & IGNPAR)
-+			port->ignore_status_mask |= UART_LSR_OE;
-+	}
-+
-+	//save_flags(flags); cli();
-+	old_ier = UART_GET_IER(port);
-+
-+        if(UART_ENABLE_MS(port, termios->c_cflag))
-+             old_ier |= UART_IER_MS;
-+
-+	/* Set baud rate */
-+	UART_PUT_LCR(port, UART_LCR_DLAB);
-+	UART_PUT_DIV_LO(port, (quot & 0xff));
-+	UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
-+
-+	UART_PUT_LCR(port, uart_mc);
-+	UART_PUT_IER(port, old_ier);
-+
-+	//restore_flags(flags);
-+	spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+
-+
-+static int sl2312_startup(struct uart_port *port)
-+{
-+	int retval;
-+	unsigned int regs;
-+
-+//        printk("sl2312 startup : \n");
-+
-+	/*
-+	 * Use iobase to store a pointer to info. We need this to start a
-+	 * transmission as the tranmittr interrupt is only generated on
-+	 * the transition to the idle state
-+	 */
-+
-+	/*
-+	 * Allocate the IRQ
-+	 */
-+	retval = request_irq(port->irq, sl2312_int, IRQF_DISABLED, "sl2312", port);
-+	if (retval)
-+		return retval;
-+
-+        /* setup interrupt controller  */
-+        regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_UART_MASK);
-+        *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_UART_MASK);
-+        *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_UART_MASK);
-+
-+	/*
-+	 * Finally, enable interrupts. Use the TII interrupt to minimise
-+	 * the number of interrupts generated. If higher performance is
-+	 * needed, consider using the TI interrupt with a suitable FIFO
-+	 * threshold
-+	 */
-+	UART_PUT_IER(port, (UART_IER_DR|UART_IER_TE));
-+
-+	return 0;
-+}
-+
-+static void sl2312_shutdown(struct uart_port *port)
-+{
-+//        printk("sl2312 shutdown : \n");
-+
-+	/*
-+	 * disable all interrupts, disable the port
-+	 */
-+	UART_PUT_IER(port, 0x0);
-+
-+	/* disable break condition and fifos */
-+//	UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
-+
-+	/*
-+	 * Free the interrupt
-+	 */
-+	free_irq(port->irq, port);
-+}
-+
-+static const char *sl2312_type(struct uart_port *port)
-+{
-+	return port->type == PORT_SL2312 ? "SL2312" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'
-+ */
-+static void sl2312_release_port(struct uart_port *port)
-+{
-+//        printk("sl2312 release port : \n");
-+
-+	release_mem_region(port->mapbase, UART_PORT_SIZE);
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'
-+ */
-+static int sl2312_request_port(struct uart_port *port)
-+{
-+	return request_mem_region(port->mapbase, UART_PORT_SIZE,
-+				    "serial_sl2312") != NULL ? 0 : -EBUSY;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void sl2312_config_port(struct uart_port *port, int flags)
-+{
-+
-+	if (flags & UART_CONFIG_TYPE) {
-+		if (sl2312_request_port(port) == 0)
-+			port->type = PORT_SL2312;
-+	}
-+}
-+
-+/*
-+ * verify the new serial_struct (for TIOCSSERIAL).
-+ */
-+static int sl2312_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+	int ret = 0;
-+
-+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
-+		ret = -EINVAL;
-+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
-+		ret = -EINVAL;
-+	if (ser->baud_base < 9600)
-+		ret = -EINVAL;
-+	return ret;
-+}
-+
-+static struct uart_ops sl2312_pops = {
-+	.tx_empty		=sl2312_tx_empty,
-+	.set_mctrl		=sl2312_set_mctrl_null,
-+	.get_mctrl		=sl2312_get_mctrl,
-+	.stop_tx		=sl2312_stop_tx,
-+	.start_tx		=sl2312_start_tx,
-+	.stop_rx		=sl2312_stop_rx,
-+	.enable_ms		=sl2312_enable_ms,
-+	.break_ctl		=sl2312_break_ctl,
-+	.startup		=sl2312_startup,
-+	.shutdown		=sl2312_shutdown,
-+	.set_termios	=sl2312_set_termios,
-+	.type			=sl2312_type,
-+	.release_port	=sl2312_release_port,
-+	.request_port	=sl2312_request_port,
-+	.config_port	=sl2312_config_port,
-+	.verify_port	=sl2312_verify_port,
-+};
-+
-+#ifdef CONFIG_ARCH_SL2312
-+
-+static struct uart_port sl2312_ports[UART_NR] = {
-+	{
-+		membase:	(void *)IO_ADDRESS(SL2312_UART_BASE),
-+		mapbase:	SL2312_UART_BASE,
-+		iotype:		SERIAL_IO_MEM,
-+		irq:		IRQ_UART,
-+		uartclk:	UART_CLK,
-+		fifosize:	16,
-+		ops:		&sl2312_pops,
-+		flags:		ASYNC_BOOT_AUTOCONF,
-+	}
-+};
-+
-+#endif
-+
-+#ifdef CONFIG_SERIAL_SL2312_CONSOLE
-+#ifdef used_and_not_const_char_pointer
-+static int sl2312_console_read(struct uart_port *port, char *s, u_int count)
-+{
-+	unsigned int status;
-+	int c;
-+#ifdef DEBUG
-+	printk("sl2312_console_read() called\n");
-+#endif
-+
-+	c = 0;
-+	while (c < count) {
-+		status = UART_GET_LSR(port);
-+ 		if (UART_RX_DATA(status)) {
-+			*s++ = UART_GET_CHAR(port);
-+			c++;
-+		} else {
-+			// nothing more to get, return
-+			return c;
-+		}
-+	}
-+	// return the count
-+	return c;
-+}
-+#endif
-+static void sl2312_console_write(struct console *co, const char *s, unsigned count)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+	struct uart_port *port = sl2312_ports + co->index;
-+	unsigned int status, old_ies;
-+	int i;
-+
-+	/*
-+	 *	First save the CR then disable the interrupts
-+	 */
-+	old_ies = UART_GET_IER(port);
-+	UART_PUT_IER(port,0x0);
-+
-+	/*
-+	 *	Now, do each character
-+	 */
-+	for (i = 0; i < count; i++) {
-+		do {
-+			status = UART_GET_LSR(port);
-+		} while (!UART_TX_READY(status));
-+		UART_PUT_CHAR(port, s[i]);
-+		if (s[i] == '\n') {
-+			do {
-+				status = UART_GET_LSR(port);
-+			} while (!UART_TX_READY(status));
-+			UART_PUT_CHAR(port, '\r');
-+		}
-+	}
-+
-+	/*
-+	 *	Finally, wait for transmitter to become empty
-+	 *	and restore the IES
-+	 */
-+	do {
-+		status = UART_GET_LSR(port);
-+	} while (!(status&UART_LSR_TE));
-+	UART_PUT_IER(port, old_ies);
-+#endif
-+}
-+
-+#if 0
-+static void sl2312_console_device(struct console *co,int *index)
-+{
-+
-+	struct uart_driver *p = co->data;
-+    *index = co->index;
-+    return p->tty_driver;
-+
-+}
-+#endif
-+
-+static void /*__init*/ sl2312_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-+{
-+//	printk("sl2312 console get options : \n");
-+
-+	u_int uart_mc, quot;
-+	uart_mc= UART_GET_MCR(port);
-+
-+	*parity = 'n';
-+	if (uart_mc & UART_LCR_PE) {
-+		if (uart_mc & UART_LCR_EVEN)
-+			*parity = 'e';
-+		else
-+			*parity = 'o';
-+	}
-+
-+	switch (uart_mc & UART_LCR_MSK){
-+
-+	case UART_LCR_LEN5:
-+		*bits = 5;
-+		break;
-+	case UART_LCR_LEN6:
-+		*bits = 6;
-+		break;
-+	case UART_LCR_LEN7:
-+		*bits = 7;
-+		break;
-+	case UART_LCR_LEN8:
-+		*bits = 8;
-+		break;
-+	}
-+	UART_PUT_MCR(port,UART_LCR_DLAB);
-+	quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
-+	UART_PUT_MCR(port,uart_mc);
-+	*baud = port->uartclk / (16 *quot );
-+}
-+
-+static int __init sl2312_console_setup(struct console *co, char *options)
-+{
-+	struct uart_port *port;
-+	int baud = 19200;
-+	int bits = 8;
-+	int parity = 'n';
-+	int flow= 'n';
-+
-+	printk("sl2312 console setup : \n");
-+
-+#ifdef CONFIG_ARCH_SL2312
-+	/*
-+	 * Check whether an invalid uart number has been specified, and
-+	 * if so, search for the first available port that does have
-+	 * console support.
-+	 */
-+	port = uart_get_console(sl2312_ports,SL2312_NO_PORTS,co);
-+#else
-+	return -ENODEV;
-+#endif
-+
-+	if (options)
-+		uart_parse_options(options, &baud, &parity, &bits, &flow);
-+	else
-+		sl2312_console_get_options(port, &baud, &parity, &bits);
-+
-+	return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+extern struct uart_driver sl2312_reg;
-+static struct console sl2312_console = {
-+	.name      = SERIAL_SL2312_NAME,
-+	.write		= sl2312_console_write,
-+	.device		= uart_console_device,
-+//	.device		= sl2312_console_device,
-+	.setup		= sl2312_console_setup,
-+//	.flags		= (CON_PRINTBUFFER|CON_ENABLED),
-+	.flags		= CON_PRINTBUFFER,
-+	.index		= -1,
-+	.data       = &sl2312_reg,
-+};
-+
-+static int __init sl2312_console_init(void)
-+{
-+	register_console(&sl2312_console);
-+	return 0;
-+
-+}
-+
-+console_initcall(sl2312_console_init);
-+
-+#define SL2312_CONSOLE	&sl2312_console
-+#else
-+#define SL2312_CONSOLE	NULL
-+#endif
-+
-+// static
-+struct uart_driver sl2312_reg = {
-+	.owner         = NULL,
-+	.driver_name	= SERIAL_SL2312_NAME,
-+	.dev_name		= SERIAL_SL2312_NAME,
-+	.major          = SERIAL_SL2312_MAJOR,
-+	.minor			= SERIAL_SL2312_MINOR,
-+	.nr				= UART_NR,
-+	.cons			= SL2312_CONSOLE,
-+};
-+
-+static int __init sl2312_init(void)
-+{
-+       int result;
-+	//printk("serial_it8712: it871212_init \n");
-+
-+        result = uart_register_driver(&sl2312_reg);
-+        if(result)
-+             return result;
-+	result = uart_add_one_port(&sl2312_reg, &sl2312_ports[0]);
-+
-+        return result;
-+}
-+
-+
-+__initcall(sl2312_init);
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -147,6 +147,10 @@
- #define PORT_SB1250_DUART	77
- 
- 
-+/* Storlink Soc */
-+#define PORT_SL2312     72
-+#define PORT_IT8712     73
-+
- #ifdef __KERNEL__
- 
- #include 
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -70,6 +70,16 @@ obj-$(CONFIG_R3964)		+= n_r3964.o
- obj-$(CONFIG_APPLICOM)		+= applicom.o
- obj-$(CONFIG_SONYPI)		+= sonypi.o
- obj-$(CONFIG_RTC)		+= rtc.o
-+
-+###  for Storlink SoC ###
-+obj-$(CONFIG_SL2312_RTC) += sl2312_rtc.o
-+obj-$(CONFIG_IT8712_GPIO)   += it8712_gpio.o
-+obj-$(CONFIG_GEMINI_GPIO)   += gemini_gpio.o
-+obj-$(CONFIG_GEMINI_PWC) += gemini_pwr.o
-+obj-$(CONFIG_GEMINI_CIR)    += gemini_cir.o
-+obj-$(CONFIG_GEMINI_I2S)    += gemini_i2s.o
-+obj-$(CONFIG_SL2312_WATCHDOG) += sl2312_wd.o
-+
- obj-$(CONFIG_HPET)		+= hpet.o
- obj-$(CONFIG_GEN_RTC)		+= genrtc.o
- obj-$(CONFIG_EFI_RTC)		+= efirtc.o
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -280,6 +280,56 @@ config SERIAL_8250_RM9K
- 
- comment "Non-8250 serial port support"
- 
-+config SERIAL_SL2312
-+	bool "SL2312  serial port (sl2312) support"
-+	depends on ARCH_SL2312
-+	select SERIAL_CORE
-+	select SERIAL_SL2312_CONSOLE
-+	help
-+         Say Y here if you want to use the hard logic uart on SWORD. This
-+         driver also supports soft logic implentations of this uart core.
-+
-+config SERIAL_SL2312_CONSOLE
-+	bool "Support for console on SL2312 serial port"
-+	depends on SERIAL_SL2312
-+	select SERIAL_CORE_CONSOLE
-+	help
-+        Say Y here if you want to support a serial console on an SWORD
-+        hard logic uart or uart00 IP core.
-+
-+        Even if you say Y here, the currently visible virtual console
-+        (/dev/tty0) will still be used as the system console by default, but
-+        you can alter that using a kernel command line option such as
-+        "console=ttyS0". (Try "man bootparam" or see the documentation of
-+        your boot loader (lilo or loadlin) about how to pass options to the
-+        kernel at boot time.)
-+
-+
-+config SERIAL_IT8712
-+	bool "Sl2312 serial port(IT8712) support"
-+	depends on ARM && ARCH_SL2312 && SL2312_LPC
-+	select SERIAL_CORE
-+	select SERIAL_IT8712_CONSOLE
-+	help
-+	  Say Y here if you want to use the hard logic uart on Excalibur. This
-+	  driver also supports soft logic implentations of this uart core.
-+
-+config SERIAL_IT8712_CONSOLE
-+	bool "Support for console on Sword serial port(IT8712)"
-+	depends on SERIAL_IT8712
-+	select SERIAL_CORE_CONSOLE
-+	help
-+	  Say Y here if you want to support a serial console on an Excalibur
-+	  hard logic uart or uart00 IP core.
-+
-+	  Even if you say Y here, the currently visible virtual console
-+	  (/dev/tty0) will still be used as the system console by default, but
-+	  you can alter that using a kernel command line option such as
-+	  "console=ttySI0". (Try "man bootparam" or see the documentation of
-+	  your boot loader (lilo or loadlin) about how to pass options to the
-+	  kernel at boot time.)
-+
-+
- config SERIAL_AMBA_PL010
- 	tristate "ARM AMBA PL010 serial port support"
- 	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -62,5 +62,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_se
- obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
- obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
- obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-+obj-$(CONFIG_SERIAL_IT8712) += it8712.o
-+obj-$(CONFIG_SERIAL_SL2312) += serial_sl2312.o
- obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
diff --git a/target/linux/storm/patches/009-watchdog.patch b/target/linux/storm/patches/009-watchdog.patch
deleted file mode 100644
index a76ce7f49c..0000000000
--- a/target/linux/storm/patches/009-watchdog.patch
+++ /dev/null
@@ -1,398 +0,0 @@
---- a/arch/arm/mach-sl2312/sl3516_device.c
-+++ b/arch/arm/mach-sl2312/sl3516_device.c
-@@ -76,9 +76,30 @@ static struct platform_device sata0_devi
- 	.resource       = sl3516_sata0_resources,
- };
- 
-+static struct resource sl351x_wdt_resources[] = {
-+	[0] = {
-+		.start  = SL2312_WAQTCHDOG_BASE + 0x00,
-+		.end    = SL2312_WAQTCHDOG_BASE + 0x1C,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start  = IRQ_WATCHDOG,
-+		.end    = IRQ_WATCHDOG,
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device sl351x_wdt = {
-+	.name		= "sl351x-wdt",
-+	.id		= -1,
-+	.resource	= sl351x_wdt_resources,
-+	.num_resources	= ARRAY_SIZE(sl351x_wdt_resources),
-+};
-+
- static struct platform_device *sata_devices[] __initdata = {
- 	&sata_device,
- 	&sata0_device,
-+	&sl351x_wdt,
- };
- 
- static int __init sl3516_init(void)
---- a/drivers/char/watchdog/Kconfig
-+++ b/drivers/char/watchdog/Kconfig
-@@ -171,6 +171,17 @@ config EP93XX_WATCHDOG
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called ep93xx_wdt.
- 
-+config WATCHDOG_SL351X
-+	tristate "SL351x Watchdog"
-+	depends on WATCHDOG && ARCH_SL2312
-+	help
-+	  This driver adds watchdog support for the integrated watchdog in the
-+	  SL351x processors (Farraday core). If you have one of these processors
-+	  and wish to have watchdog support enabled, say Y, otherwise say N.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called sl351x_wdt.
-+
- config OMAP_WATCHDOG
- 	tristate "OMAP Watchdog"
- 	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
---- a/drivers/char/watchdog/Makefile
-+++ b/drivers/char/watchdog/Makefile
-@@ -36,6 +36,7 @@ obj-$(CONFIG_S3C2410_WATCHDOG) += s3c241
- obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
- obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
-+obj-$(CONFIG_WATCHDOG_SL351X) += sl351x_wdt.o
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
- obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
- obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
---- /dev/null
-+++ b/drivers/char/watchdog/sl351x_wdt.c
-@@ -0,0 +1,332 @@
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#define WATCHDOG_TEST 1
-+#define PFX "sl351x-wdt: "
-+
-+#define _WATCHDOG_COUNTER  0x00
-+#define _WATCHDOG_LOAD     0x04
-+#define _WATCHDOG_RESTART  0x08
-+#define _WATCHDOG_CR       0x0C
-+#define _WATCHDOG_STATUS   0x10
-+#define _WATCHDOG_CLEAR    0x14
-+#define _WATCHDOG_INTRLEN  0x18
-+
-+static struct resource  *wdt_mem;
-+static struct resource  *wdt_irq;
-+static void __iomem     *wdt_base;
-+static int 		wdt_margin = WATCHDOG_TIMEOUT_MARGIN;	/* in range of 0 .. 60s */
-+
-+static int open_state = WATCHDOG_DRIVER_CLOSE;
-+static int wd_expire = 0;
-+
-+static void watchdog_enable(void)
-+{
-+	unsigned long wdcr;
-+
-+	wdcr = readl(wdt_base + _WATCHDOG_CR);
-+	wdcr |= (WATCHDOG_WDENABLE_MSK|WATCHDOG_WDRST_MSK);
-+#ifdef WATCHDOG_TEST
-+	wdcr |= WATCHDOG_WDINTR_MSK;
-+//	wdcr &= ~WATCHDOG_WDRST_MSK;
-+#endif
-+	wdcr &= ~WATCHDOG_WDCLOCK_MSK;
-+	writel(wdcr, wdt_base + _WATCHDOG_CR);
-+}
-+
-+static void watchdog_set_timeout(unsigned long timeout)
-+{
-+	timeout = WATCHDOG_TIMEOUT_SCALE * timeout;
-+	writel(timeout, wdt_base + _WATCHDOG_LOAD);
-+	writel(WATCHDOG_RESTART_VALUE, wdt_base + _WATCHDOG_RESTART);
-+}
-+
-+static void watchdog_keepalive(void)
-+{
-+	writel(WATCHDOG_RESTART_VALUE, wdt_base + _WATCHDOG_RESTART);
-+}
-+
-+static void watchdog_disable(void)
-+{
-+	unsigned long wdcr;
-+
-+	wdcr = readl(wdt_base + _WATCHDOG_CR);
-+	wdcr &= ~WATCHDOG_WDENABLE_MSK;
-+	writel(wdcr, wdt_base + _WATCHDOG_CR);
-+}
-+
-+
-+#ifdef WATCHDOG_TEST
-+static irqreturn_t watchdog_irq(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	unsigned int clear;
-+
-+	writel(WATCHDOG_CLEAR_STATUS, wdt_base + _WATCHDOG_CLEAR);
-+	printk(KERN_INFO PFX "Watchdog timeout, resetting system...\n");
-+
-+	clear = __raw_readl(IO_ADDRESS(SL2312_INTERRUPT_BASE)+0x0C);
-+	clear &= 0x01;
-+	__raw_writel(clear,IO_ADDRESS(SL2312_INTERRUPT_BASE)+0x08);
-+	wd_expire = 1;
-+	return IRQ_HANDLED;
-+}
-+
-+#endif
-+
-+#define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
-+static struct watchdog_info sl351x_wdt_ident = {
-+	.options          =     OPTIONS,
-+	.firmware_version =     0,
-+	.identity         =     "sl351x Watchdog",
-+};
-+
-+struct file_operations watchdog_fops = {
-+	.write		= watchdog_write,
-+	.read		= watchdog_read,
-+	.open		= watchdog_open,
-+	.release	= watchdog_release,
-+	.ioctl		= watchdog_ioctl,
-+};
-+
-+static int watchdog_open(struct inode *inode, struct file *filp)
-+{
-+	if (open_state == WATCHDOG_DRIVER_OPEN)
-+		return -EBUSY;
-+
-+	wd_expire = 0;
-+
-+	watchdog_disable();
-+	watchdog_set_timeout(wdt_margin);
-+	watchdog_enable();
-+
-+	printk(KERN_INFO PFX "watchog timer enabled, margin: %ds.\n", wdt_margin);
-+	open_state = WATCHDOG_DRIVER_OPEN;
-+
-+	return nonseekable_open(inode, filp);
-+}
-+
-+static int watchdog_release(struct inode *inode, struct file *filp)
-+{
-+	watchdog_disable();
-+
-+	open_state = WATCHDOG_DRIVER_CLOSE;
-+	wd_expire = 0;
-+	printk(KERN_INFO PFX "watchog timer disabled, margin: %ds.\n", wdt_margin);
-+
-+	return 0;
-+}
-+
-+static ssize_t watchdog_read(struct file *filp, char *buf, size_t count, loff_t *off)
-+{
-+	int i;
-+	unsigned long val;
-+
-+
-+	for(i=0;i< count;i++)
-+	{
-+		if ((i%4)==0)
-+			val = *((unsigned long *)WATCHDOG_COUNTER);
-+		buf[i] = (val & 0xFF);
-+		val >>= 8;
-+	}
-+	return count;
-+}
-+
-+static ssize_t watchdog_write(struct file *filp, const char *buf, size_t len, loff_t *off)
-+{
-+	/*  Refresh the timer. */
-+	if (len) {
-+		watchdog_keepalive();
-+	}
-+	return len;
-+
-+}
-+
-+static int watchdog_ioctl(struct inode *inode, struct file *filp,
-+			  unsigned int cmd, unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int margin;
-+
-+	switch(cmd)
-+	{
-+	case WDIOC_GETSUPPORT:
-+		return copy_to_user(argp, &sl351x_wdt_ident,
-+				    sizeof(sl351x_wdt_ident)) ? -EFAULT : 0;
-+
-+	case WDIOC_GETSTATUS:
-+	case WDIOC_GETBOOTSTATUS:
-+		return put_user(0, (int __user*)argp);
-+
-+	case WDIOC_KEEPALIVE:
-+		watchdog_keepalive();
-+		return 0;
-+
-+	case WDIOC_SETTIMEOUT:
-+		if (get_user(margin, (int __user*)argp))
-+			return -EFAULT;
-+
-+		/* Arbitrary, can't find the card's limits */
-+		if ((margin < 0) || (margin > 60))
-+			return -EINVAL;
-+
-+		// watchdog_disable();
-+		wdt_margin = margin;
-+		watchdog_set_timeout(margin);
-+		watchdog_keepalive();
-+		// watchdog_enable();
-+
-+		/* Fall through */
-+
-+	case WDIOC_GETTIMEOUT:
-+		return put_user(wdt_margin, (int *)arg);
-+
-+	default:
-+		return -ENOIOCTLCMD;
-+	}
-+}
-+
-+static struct miscdevice wd_dev= {
-+	WATCHDOG_MINOR,
-+	"watchdog",
-+	&watchdog_fops
-+};
-+
-+static char banner[] __initdata = KERN_INFO "SL351x Watchdog Timer, (c) 2007 WILIBOX\n";
-+
-+static int sl351x_wdt_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	int ret, size;
-+	unsigned long wdcr;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (res == NULL) {
-+		printk(KERN_INFO PFX "failed to get memory region resouce\n");
-+		return -ENOMEM;
-+	}
-+
-+	size = (res->end-res->start)+1;
-+
-+	wdt_mem = request_mem_region(res->start, size, pdev->name);
-+	if (wdt_mem == NULL) {
-+		printk(KERN_INFO PFX "failed to get memory region\n");
-+		return -ENOENT;
-+	}
-+
-+	wdt_base = ioremap(res->start, size);
-+	if (wdt_base == NULL) {
-+		printk(KERN_INFO PFX "failed to ioremap() region\n");
-+		return -EINVAL;
-+	}
-+
-+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+	if (res == NULL) {
-+		 printk(KERN_INFO PFX "failed to get irq resource\n");
-+		 return -ENOENT;
-+	}
-+
-+	wdt_irq = res;
-+
-+	ret = request_irq(res->start, watchdog_irq, 0, pdev->name, pdev);
-+	if (ret != 0) {
-+		printk(KERN_INFO PFX "failed to install irq (%d)\n", ret);
-+		return ret;
-+	}
-+
-+	wdcr = readl(wdt_base + _WATCHDOG_CR);
-+	if (wdcr & WATCHDOG_WDENABLE_MSK) {
-+		printk(KERN_INFO PFX "Found watchdog in enabled state, reseting ...\n");
-+		wdcr &= ~WATCHDOG_WDENABLE_MSK;
-+		writel(wdcr, wdt_base + _WATCHDOG_CR);
-+	}
-+
-+	ret = misc_register(&wd_dev);
-+
-+	return ret;
-+}
-+
-+static int sl351x_wdt_remove(struct platform_device *pdev)
-+{
-+	if (wdt_base != NULL) {
-+		iounmap(wdt_base);
-+		wdt_base = NULL;
-+	}
-+
-+	if (wdt_irq != NULL) {
-+		free_irq(wdt_irq->start, pdev);
-+		release_resource(wdt_irq);
-+		wdt_irq = NULL;
-+	}
-+
-+	if (wdt_mem != NULL) {
-+		release_resource(wdt_mem);
-+		wdt_mem = NULL;
-+	}
-+
-+	misc_deregister(&wd_dev);
-+
-+	return 0;
-+}
-+
-+static void sl351x_wdt_shutdown(struct platform_device *dev)
-+{
-+	watchdog_disable();
-+}
-+
-+#ifdef CONFIG_PM
-+static int sl351x_wdt_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	watchdog_disable();
-+}
-+
-+static int sl351x_wdt_resume(struct platform_device *dev)
-+{
-+	watchdog_set_timeout(wdt_margin);
-+	watchdog_enable();
-+}
-+
-+#else
-+#define sl351x_wdt_suspend	NULL
-+#define sl351x_wdt_resume	NULL
-+#endif
-+
-+static struct platform_driver sl351x_wdt_driver = {
-+	.probe          = sl351x_wdt_probe,
-+	.remove         = sl351x_wdt_remove,
-+	.shutdown       = sl351x_wdt_shutdown,
-+	.suspend        = sl351x_wdt_suspend,
-+	.resume         = sl351x_wdt_resume,
-+	.driver         = {
-+		.owner  = THIS_MODULE,
-+		.name   = "sl351x-wdt",
-+	},
-+};
-+
-+static int __init watchdog_init(void)
-+{
-+	printk(banner);
-+	return platform_driver_register(&sl351x_wdt_driver);
-+}
-+
-+static void __exit watchdog_exit(void)
-+{
-+	platform_driver_unregister(&sl351x_wdt_driver);
-+}
-+
-+module_init(watchdog_init);
-+module_exit(watchdog_exit);
diff --git a/target/linux/storm/patches/1100-gpio.patch b/target/linux/storm/patches/1100-gpio.patch
deleted file mode 100644
index 5717d75235..0000000000
--- a/target/linux/storm/patches/1100-gpio.patch
+++ /dev/null
@@ -1,384 +0,0 @@
---- /dev/null
-+++ b/drivers/char/gemini_gpio_dev.c
-@@ -0,0 +1,356 @@
-+/*
-+ * 	GPIO driver for Gemini board
-+ * 	Provides /dev/gpio
-+ */
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 	/* copy_to_user, copy_from_user */
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#define GEMINI_GPIO_BASE1		IO_ADDRESS(SL2312_GPIO_BASE)
-+#define GEMINI_GPIO_BASE2		IO_ADDRESS(SL2312_GPIO_BASE1)
-+
-+#define GPIO_SET	2
-+#define MAX_GPIO_LINE	32*GPIO_SET
-+
-+wait_queue_head_t gemini_gpio_wait[MAX_GPIO_LINE];
-+
-+enum GPIO_REG
-+{
-+    GPIO_DATA_OUT   		= 0x00,
-+    GPIO_DATA_IN    		= 0x04,
-+    GPIO_PIN_DIR    		= 0x08,
-+    GPIO_BY_PASS    		= 0x0C,
-+    GPIO_DATA_SET   		= 0x10,
-+    GPIO_DATA_CLEAR 		= 0x14,
-+    GPIO_PULL_ENABLE 		= 0x18,
-+    GPIO_PULL_TYPE 			= 0x1C,
-+    GPIO_INT_ENABLE 		= 0x20,
-+    GPIO_INT_RAW_STATUS 	= 0x24,
-+    GPIO_INT_MASK_STATUS 	= 0x28,
-+    GPIO_INT_MASK 			= 0x2C,
-+    GPIO_INT_CLEAR 			= 0x30,
-+    GPIO_INT_TRIG 			= 0x34,
-+    GPIO_INT_BOTH 			= 0x38,
-+    GPIO_INT_POLAR 			= 0x3C
-+};
-+
-+unsigned int regist_gpio_int0=0,regist_gpio_int1=0;
-+
-+/* defines a specific GPIO bit number and state */
-+struct gpio_bit {
-+	unsigned char bit;
-+	unsigned char state;
-+};
-+
-+#define GPIO_MAJOR    10
-+#define GPIO_MINOR    127
-+
-+/*
-+ * ioctl calls that are permitted to the /dev/gpio interface
-+ */
-+#define GPIO_GET_BIT	0x0000001
-+#define GPIO_SET_BIT	0x0000002
-+#define GPIO_GET_CONFIG	0x0000003
-+#define GPIO_SET_CONFIG 0x0000004
-+
-+//#define GPIO_CONFIG_OUT  1
-+//#define GPIO_CONFIG_IN   2
-+
-+
-+
-+#define DEVICE_NAME "gpio"
-+
-+//#define DEBUG
-+
-+/*
-+ * GPIO interface
-+ */
-+
-+/* /dev/gpio */
-+static int gpio_ioctl(struct inode *inode, struct file *file,
-+                     unsigned int cmd, unsigned long arg);
-+
-+/* /proc/driver/gpio */
-+static int gpio_read_proc(char *page, char **start, off_t off,
-+                         int count, int *eof, void *data);
-+
-+static unsigned char gpio_status;        /* bitmapped status byte.       */
-+
-+/* functions for set/get gpio lines on storlink cpu */
-+
-+void gpio_line_get(unsigned char pin, u32 * data)
-+{
-+	unsigned int set = pin >>5;		// each GPIO set has 32 pins
-+	unsigned int status,addr;
-+
-+	addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1) + GPIO_DATA_IN;
-+	status = readl(addr);
-+#ifdef DEBUG
-+	printk("status = %08X, pin = %d, set = %d\n", status, pin, set);
-+#endif
-+	if (set)
-+			*data = (status&(1<<(pin-32)))?1:0;
-+	else
-+			*data = (status&(1<>5;		// each GPIO set has 32 pins
-+	unsigned int status=0,addr;
-+
-+	addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+(high?GPIO_DATA_SET:GPIO_DATA_CLEAR);
-+
-+	status &= ~(1 << (pin %32));
-+	status |= (1 << (pin % 32));
-+	writel(status,addr);
-+}
-+
-+/*
-+ * pin = [0..63]
-+ * mode =
-+ * 			1 -- OUT
-+ * 			2 -- IN
-+ */
-+void gpio_line_config(unsigned char pin, unsigned char mode)
-+{
-+	unsigned char set = pin >>5;		// each GPIO set has 32 pins
-+	unsigned int status,addr;
-+
-+	addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PIN_DIR;
-+	status = readl(addr);
-+
-+	status &= ~(1 << (pin %32));
-+	if (mode == 1)
-+			status |= (1 << (pin % 32)); /* PinDir: 0 - input, 1 - output */
-+
-+	writel(status,addr);
-+#if 0
-+	/* enable pullup-high if mode is input */
-+
-+	addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_ENABLE;
-+	status = readl(addr);
-+
-+	status &= ~(1 << (pin %32));
-+	if (mode == 2) /* input */
-+			status |= (1 << (pin % 32)); /* PullEnable: 0 - disable, 1 - enable */
-+
-+	writel(status,addr);
-+
-+	addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_TYPE;
-+	status = readl(addr);
-+
-+	status &= ~(1 << (pin %32));
-+	if (mode == 2) /* input */
-+			status |= (1 << (pin % 32)); /* PullType: 0 - low, 1 - high */
-+
-+	writel(status,addr);
-+#endif
-+}
-+
-+#define GPIO_IS_OPEN             0x01    /* means /dev/gpio is in use     */
-+
-+/*
-+ *      Now all the various file operations that we export.
-+ */
-+static int gpio_ioctl(struct inode *inode, struct file *file,
-+                         unsigned int cmd, unsigned long arg)
-+{
-+		struct gpio_bit bit;
-+		u32 val;
-+
-+		if (copy_from_user(&bit, (struct gpio_bit *)arg,
-+								sizeof(bit)))
-+				return -EFAULT;
-+
-+		switch (cmd) {
-+
-+				case GPIO_GET_BIT:
-+						gpio_line_get(bit.bit, &val);
-+						bit.state = val;
-+						return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0;
-+				case GPIO_SET_BIT:
-+						val = bit.state;
-+						gpio_line_set(bit.bit, val);
-+						return 0;
-+				case GPIO_GET_CONFIG:
-+						// gpio_line_config(bit.bit, bit.state);
-+						return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0;
-+				case GPIO_SET_CONFIG:
-+						val = bit.state;
-+						gpio_line_config(bit.bit, bit.state);
-+						return 0;
-+		}
-+		return -EINVAL;
-+}
-+
-+
-+static int gpio_open(struct inode *inode, struct file *file)
-+{
-+        if (gpio_status & GPIO_IS_OPEN)
-+                return -EBUSY;
-+
-+        gpio_status |= GPIO_IS_OPEN;
-+        return 0;
-+}
-+
-+
-+static int gpio_release(struct inode *inode, struct file *file)
-+{
-+        /*
-+         * Turn off all interrupts once the device is no longer
-+         * in use and clear the data.
-+         */
-+
-+        gpio_status &= ~GPIO_IS_OPEN;
-+        return 0;
-+}
-+
-+
-+/*
-+ *      The various file operations we support.
-+ */
-+
-+static struct file_operations gpio_fops = {
-+        .owner          = THIS_MODULE,
-+        .ioctl          = gpio_ioctl,
-+        .open           = gpio_open,
-+        .release        = gpio_release,
-+};
-+
-+static struct miscdevice gpio_dev =
-+{
-+        .minor          = GPIO_MINOR,
-+        .name           = "gpio",
-+        .fops           = &gpio_fops,
-+};
-+
-+
-+
-+
-+#ifdef CONFIG_PROC_FS
-+static struct proc_dir_entry *dir;
-+
-+/*
-+ *      Info exported via "/proc/driver/gpio".
-+ */
-+static int gpio_get_status(char *buf)
-+{
-+    char *p = buf;
-+	u32 val = 0;
-+	int i;
-+	int bit;
-+#ifdef DEBUG
-+	u32 addr;
-+
-+	for (i = 0; i < 0x20; i+=4 ) {
-+			addr = IO_ADDRESS(SL2312_GPIO_BASE) + i;
-+			val = readl(addr);
-+			p+=sprintf(p, "GPIO0: 0x%02X: %08X\n", i, val );
-+	}
-+	for (i = 0; i < 0x20; i+=4 ) {
-+			addr = IO_ADDRESS(SL2312_GPIO_BASE1) + i;
-+			val = readl(addr);
-+			p+=sprintf(p, "GPIO1: 0x%02X: %08X\n", i, val );
-+	}
-+#endif
-+
-+	for (i = 0; i < 32; i++) {
-+			gpio_line_get(i, &bit);
-+			if (bit)
-+					val |= (1 << i);
-+	}
-+	p += sprintf(p, "gpio0\t: 0x%08x\n", val);
-+
-+	val = 0;
-+	for (i = 32; i < 64; i++) {
-+			gpio_line_get(i, &bit);
-+			if (bit)
-+					val |= (1 << i);
-+	}
-+	p += sprintf(p, "gpio1\t: 0x%08x\n", val);
-+
-+	return p - buf;
-+}
-+
-+
-+/* /proc/driver/gpio read op
-+ */
-+static int gpio_read_proc(char *page, char **start, off_t off,
-+                             int count, int *eof, void *data)
-+{
-+        int len = gpio_get_status (page);
-+
-+        if (len <= off+count)
-+			*eof = 1;
-+        *start = page + off;
-+        len -= off;
-+        if ( len > count )
-+			len = count;
-+        if ( len < 0 )
-+			len = 0;
-+        return len;
-+}
-+#endif /* CONFIG_PROC_FS */
-+
-+
-+static int __init gpio_init_module(void)
-+{
-+        int retval;
-+#ifdef CONFIG_PROC_FS
-+	struct proc_dir_entry *res;
-+#endif
-+
-+        /* register /dev/gpio file ops */
-+	//retval = register_chrdev(GPIO_MAJOR, DEVICE_NAME, &gpio_fops);
-+	retval = misc_register(&gpio_dev);
-+        if(retval < 0)
-+                return retval;
-+
-+#ifdef CONFIG_PROC_FS
-+	dir = proc_mkdir("driver/gpio", NULL);
-+	if (!dir) {
-+		misc_deregister(&gpio_dev);
-+		return -ENOMEM;
-+	}
-+        /* register /proc/driver/gpio */
-+	res = create_proc_entry("info", 0644, dir);
-+	if (res) {
-+		res->read_proc= gpio_read_proc;
-+	} else {
-+		misc_deregister(&gpio_dev);
-+		return -ENOMEM;
-+	}
-+#endif
-+
-+	printk("%s: GPIO driver loaded\n", __FILE__);
-+
-+	return 0;
-+}
-+
-+static void __exit gpio_cleanup_module(void)
-+{
-+	remove_proc_entry ("info", dir);
-+        misc_deregister(&gpio_dev);
-+
-+	printk("%s: GPIO driver unloaded\n", __FILE__);
-+}
-+
-+module_init(gpio_init_module);
-+module_exit(gpio_cleanup_module);
-+
-+MODULE_AUTHOR("Jonas Majauskas");
-+MODULE_LICENSE("GPL");
-+
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -1071,5 +1071,12 @@ config DEVPORT
- 
- source "drivers/s390/char/Kconfig"
- 
-+config GEMINI_GPIO_DEV
-+	tristate "GPIO driver for Gemini board (provides /dev/gpio)"
-+	depends on ARCH_SL2312
-+	default n
-+	help
-+	  GPIO driver for Gemini boards - SL3512, SL3516.
-+
- endmenu
- 
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -116,6 +116,7 @@ obj-$(CONFIG_IPMI_HANDLER)	+= ipmi/
- 
- obj-$(CONFIG_HANGCHECK_TIMER)	+= hangcheck-timer.o
- obj-$(CONFIG_TCG_TPM)		+= tpm/
-+obj-$(CONFIG_GEMINI_GPIO_DEV)		+= gemini_gpio_dev.o
- 
- obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
- 
diff --git a/toolchain/gcc/Config.in b/toolchain/gcc/Config.in
index b5642ec595..6c141e3072 100644
--- a/toolchain/gcc/Config.in
+++ b/toolchain/gcc/Config.in
@@ -35,7 +35,7 @@ config EABI_SUPPORT
 	bool
 	depends arm||armeb
 	prompt "Enable EABI support" if TOOLCHAINOPTS
-	default n if (TARGET_gemini || TARGET_storm)
+	default n if TARGET_gemini
 	default y
 	help
 	  Enable ARM EABI support
-- 
2.25.1