From 7f1913938984ef6c6a46cb53e003719196d9c5de Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Fri, 7 Sep 2007 18:20:23 +0200 Subject: [PATCH] [PPC440SPe] Improve PCIe configuration space access - correct configuration space mapping - correct bus numbering - better access to config space Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the first device on the first bus. We now allow to configure up to 16 buses; also, scanning for devices behind the PCIe-PCIe bridge is supported, so peripheral devices farther in hierarchy can be identified. Signed-off-by: Grzegorz Bernacki --- board/amcc/katmai/init.S | 12 ++-- board/amcc/katmai/katmai.c | 9 +-- board/amcc/yucca/init.S | 12 ++-- board/amcc/yucca/yucca.c | 9 +-- cpu/ppc4xx/405gp_pci.c | 17 +++--- cpu/ppc4xx/440spe_pcie.c | 111 +++++++++++++++++++++++++++++-------- include/common.h | 2 +- include/configs/katmai.h | 10 ++-- include/configs/yucca.h | 10 ++-- 9 files changed, 130 insertions(+), 62 deletions(-) diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S index 5202ae694c..e3f3da6bd8 100644 --- a/board/amcc/katmai/init.S +++ b/board/amcc/katmai/init.S @@ -67,9 +67,9 @@ tlbtabA: tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I) @@ -109,9 +109,9 @@ tlbtabB: tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I) diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index b804d55f2e..a9ae4a3739 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -392,7 +392,7 @@ int katmai_pcie_card_present(int port) static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; -void pcie_setup_hoses(void) +void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; @@ -401,7 +401,7 @@ void pcie_setup_hoses(void) * assume we're called after the PCIX hose is initialized, which takes * bus ID 0 and therefore start numbering PCIe's from 1. */ - bus = 1; + bus = busno; for (i = 0; i <= 2; i++) { /* Check for katmai card presence */ if (!katmai_pcie_card_present(i)) @@ -418,8 +418,8 @@ void pcie_setup_hoses(void) hose = &pcie_hose[i]; hose->first_busno = bus; - hose->last_busno = bus; - bus++; + hose->last_busno = bus; + hose->current_busno = bus; /* setup mem resource */ pci_set_region(hose->regions + 0, @@ -443,6 +443,7 @@ void pcie_setup_hoses(void) * Config access can only go down stream */ hose->last_busno = pci_hose_scan(hose); + bus = hose->last_busno + 1; #endif } } diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S index c92dcf7a51..67e8f8f3a2 100644 --- a/board/amcc/yucca/init.S +++ b/board/amcc/yucca/init.S @@ -70,9 +70,9 @@ tlbtabA: tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I) @@ -112,9 +112,9 @@ tlbtabB: tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I) diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index d08fcf3565..252e4fe07a 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -846,7 +846,7 @@ void yucca_setup_pcie_fpga_endpoint(int port) static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; -void pcie_setup_hoses(void) +void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; @@ -855,7 +855,7 @@ void pcie_setup_hoses(void) * assume we're called after the PCIX hose is initialized, which takes * bus ID 0 and therefore start numbering PCIe's from 1. */ - bus = 1; + bus = busno; for (i = 0; i <= 2; i++) { /* Check for yucca card presence */ if (!yucca_pcie_card_present(i)) @@ -874,8 +874,8 @@ void pcie_setup_hoses(void) hose = &pcie_hose[i]; hose->first_busno = bus; - hose->last_busno = bus; - bus++; + hose->last_busno = bus; + hose->current_busno = bus; /* setup mem resource */ pci_set_region(hose->regions + 0, @@ -899,6 +899,7 @@ void pcie_setup_hoses(void) * Config access can only go down stream */ hose->last_busno = pci_hose_scan(hose); + bus = hose->last_busno + 1; #endif } } diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 28379298b7..282e7a1ba4 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -443,7 +443,7 @@ void pci_init_board(void) static struct pci_controller ppc440_hose = {0}; -void pci_440_init (struct pci_controller *hose) +int pci_440_init (struct pci_controller *hose) { int reg_num = 0; @@ -459,7 +459,7 @@ void pci_440_init (struct pci_controller *hose) if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) { printf("PCI: SDR0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); - return; + return -1; } #elif defined(CONFIG_440GP) unsigned long strap; @@ -468,7 +468,7 @@ void pci_440_init (struct pci_controller *hose) if ((strap & CPC0_STRP1_PISE_MASK) == 0) { printf("PCI: CPC0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); - return; + return -1; } #endif #endif /* CONFIG_DISABLE_PISE_TEST */ @@ -477,7 +477,7 @@ void pci_440_init (struct pci_controller *hose) * PCI controller init *--------------------------------------------------------------------------*/ hose->first_busno = 0; - hose->last_busno = 0xff; + hose->last_busno = 0; /* PCI I/O space */ pci_set_region(hose->regions + reg_num++, @@ -515,7 +515,7 @@ void pci_440_init (struct pci_controller *hose) if (pci_pre_init (hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); - return; + return -1; } pci_register_hose( hose ); @@ -578,13 +578,16 @@ void pci_440_init (struct pci_controller *hose) #endif hose->last_busno = pci_hose_scan(hose); } + return hose->last_busno; } void pci_init_board(void) { - pci_440_init (&ppc440_hose); + int busno; + + busno = pci_440_init (&ppc440_hose); #if defined(CONFIG_440SPE) - pcie_setup_hoses(); + pcie_setup_hoses(busno + 1); #endif } diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c index 2d0b4067af..158f1c5595 100644 --- a/cpu/ppc4xx/440spe_pcie.c +++ b/cpu/ppc4xx/440spe_pcie.c @@ -40,6 +40,23 @@ enum { LNKW_X8 = 0x8 }; +static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn) +{ + u8 *base = (u8*)hose->cfg_data; + + /* use local configuration space for the first bus */ + if (PCI_BUS(devfn) == 0) { + if (hose->cfg_data == (u8*)CFG_PCIE0_CFGBASE) + base = (u8*)CFG_PCIE0_XCFGBASE; + if (hose->cfg_data == (u8*)CFG_PCIE1_CFGBASE) + base = (u8*)CFG_PCIE1_XCFGBASE; + if (hose->cfg_data == (u8*)CFG_PCIE2_CFGBASE) + base = (u8*)CFG_PCIE2_XCFGBASE; + } + + return base; +} + static void pcie_dmer_disable(void) { mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE), @@ -60,18 +77,35 @@ static void pcie_dmer_enable(void) mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA); } - static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, int offset, int len, u32 *val) { + u8 *address; *val = 0; + + /* + * Bus numbers are relative to hose->first_busno + */ + devfn -= PCI_BDF(hose->first_busno, 0, 0); + /* - * 440SPE implements only one function per port + * NOTICE: configuration space ranges are currenlty mapped only for + * the first 16 buses, so such limit must be imposed. In case more + * buses are required the TLB settings in board/amcc//init.S + * need to be altered accordingly (one bus takes 1 MB of memory space). */ - if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1))) + if (PCI_BUS(devfn) >= 16) return 0; - devfn = PCI_BDF(0,0,0); + /* + * Only single device/single function is supported for the primary and + * secondary buses of the 440SPe host bridge. + */ + if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) && + ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) + return 0; + + address = pcie_get_base(hose, devfn); offset += devfn << 4; /* @@ -101,13 +135,24 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, static int pcie_write_config(struct pci_controller *hose, unsigned int devfn, int offset, int len, u32 val) { + u8 *address; + /* - * 440SPE implements only one function per port + * Bus numbers are relative to hose->first_busno */ - if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1))) + devfn -= PCI_BDF(hose->first_busno, 0, 0); + + /* + * Same constraints as in pcie_read_config(). + */ + if (PCI_BUS(devfn) >= 16) return 0; - devfn = PCI_BDF(0,0,0); + if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) && + ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) + return 0; + + address = pcie_get_base(hose, devfn); offset += devfn << 4; /* @@ -137,7 +182,7 @@ int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u u32 v; int rv; - rv = pcie_read_config(hose, dev, offset, 1, &v); + rv = pcie_read_config(hose, dev, offset, 1, &v); *val = (u8)v; return rv; } @@ -794,12 +839,12 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) volatile void *rmbase = NULL; pci_set_ops(hose, - pcie_read_config_byte, - pcie_read_config_word, - pcie_read_config_dword, - pcie_write_config_byte, - pcie_write_config_word, - pcie_write_config_dword); + pcie_read_config_byte, + pcie_read_config_word, + pcie_read_config_dword, + pcie_write_config_byte, + pcie_write_config_word, + pcie_write_config_dword); switch (port) { case 0: @@ -822,14 +867,9 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) /* * Set bus numbers on our root port */ - if (ppc440spe_revB()) { - out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); - out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1); - out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1); - } else { - out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); - out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0); - } + out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); + out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1); + out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1); /* * Set up outbound translation to hose->mem_space from PLB @@ -886,6 +926,29 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) in_le16((u16 *)(mbase + PCI_COMMAND)) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); printf("PCIE:%d successfully set as rootpoint\n",port); + + /* Set Device and Vendor Id */ + switch (port) { + case 0: + out_le16(mbase + 0x200, 0xaaa0); + out_le16(mbase + 0x202, 0xbed0); + break; + case 1: + out_le16(mbase + 0x200, 0xaaa1); + out_le16(mbase + 0x202, 0xbed1); + break; + case 2: + out_le16(mbase + 0x200, 0xaaa2); + out_le16(mbase + 0x202, 0xbed2); + break; + default: + out_le16(mbase + 0x200, 0xaaa3); + out_le16(mbase + 0x202, 0xbed3); + } + + /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */ + out_le32(mbase + 0x208, 0x06040001); + } int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port) @@ -963,8 +1026,8 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port) /* Enable I/O, Mem, and Busmaster cycles */ out_le16((u16 *)(mbase + PCI_COMMAND), - in_le16((u16 *)(mbase + PCI_COMMAND)) | - PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + in_le16((u16 *)(mbase + PCI_COMMAND)) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); out_le16(mbase + 0x200,0xcaad); /* Setting vendor ID */ out_le16(mbase + 0x202,0xfeed); /* Setting device ID */ attempts = 10; diff --git a/include/common.h b/include/common.h index 9a5a0ab798..aca281bdad 100644 --- a/include/common.h +++ b/include/common.h @@ -275,7 +275,7 @@ void pciinfo (int, int); # endif int is_pci_host (struct pci_controller *); #if defined(CONFIG_440SPE) - void pcie_setup_hoses(void); + void pcie_setup_hoses(int busno); #endif #endif diff --git a/include/configs/katmai.h b/include/configs/katmai.h index b6d0f519a8..7834e39084 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -66,11 +66,11 @@ #define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ #define CFG_PCIE0_CFGBASE 0xc0000000 -#define CFG_PCIE0_XCFGBASE 0xc0000400 -#define CFG_PCIE1_CFGBASE 0xc0001000 -#define CFG_PCIE1_XCFGBASE 0xc0001400 -#define CFG_PCIE2_CFGBASE 0xc0002000 -#define CFG_PCIE2_XCFGBASE 0xc0002400 +#define CFG_PCIE1_CFGBASE 0xc1000000 +#define CFG_PCIE2_CFGBASE 0xc2000000 +#define CFG_PCIE0_XCFGBASE 0xc3000000 +#define CFG_PCIE1_XCFGBASE 0xc3001000 +#define CFG_PCIE2_XCFGBASE 0xc3002000 /* System RAM mapped to PCI space */ #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 906f046fa7..323535aa9f 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -68,11 +68,11 @@ #define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ #define CFG_PCIE0_CFGBASE 0xc0000000 -#define CFG_PCIE0_XCFGBASE 0xc0000400 -#define CFG_PCIE1_CFGBASE 0xc0001000 -#define CFG_PCIE1_XCFGBASE 0xc0001400 -#define CFG_PCIE2_CFGBASE 0xc0002000 -#define CFG_PCIE2_XCFGBASE 0xc0002400 +#define CFG_PCIE1_CFGBASE 0xc1000000 +#define CFG_PCIE2_CFGBASE 0xc2000000 +#define CFG_PCIE0_XCFGBASE 0xc3000000 +#define CFG_PCIE1_XCFGBASE 0xc3001000 +#define CFG_PCIE2_XCFGBASE 0xc3002000 /* System RAM mapped to PCI space */ #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -- 2.25.1