From 7dde50d70787eb2faeced82d0c025762b12363ea Mon Sep 17 00:00:00 2001 From: Alex Deymo Date: Sun, 2 Apr 2017 01:24:34 -0700 Subject: [PATCH] mmc: sdhci: Wait for SDHCI_INT_DATA_END when transferring. sdhci_transfer_data() function transfers the blocks passed up to the number of blocks defined in mmc_data, but returns immediately once all the blocks are transferred, even if the loop exit condition is not met (bit SDHCI_INT_DATA_END set in the STATUS word). When doing multiple writes to mmc, returning right after the last block is transferred can cause the write to fail when sending the MMC_CMD_STOP_TRANSMISSION command right after the MMC_CMD_WRITE_MULTIPLE_BLOCK command, leaving the mmc driver in an unconsistent state until reboot. This error was observed in the rpi3 board. This patch waits for the SDHCI_INT_DATA_END bit to be set even after sending all the blocks. Test: Reliably wrote 2GiB of data to mmc in a rpi3. Signed-off-by: Alex Deymo Reviewed-by: Simon Glass --- drivers/mmc/sdhci.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index c94d58db65..b745977b3f 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -72,6 +72,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, unsigned int start_addr) { unsigned int stat, rdy, mask, timeout, block = 0; + bool transfer_done = false; #ifdef CONFIG_MMC_SDHCI_SDMA unsigned char ctrl; ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); @@ -89,17 +90,23 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, __func__, stat); return -EIO; } - if (stat & rdy) { + if (!transfer_done && (stat & rdy)) { if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & mask)) continue; sdhci_writel(host, rdy, SDHCI_INT_STATUS); sdhci_transfer_pio(host, data); data->dest += data->blocksize; - if (++block >= data->blocks) - break; + if (++block >= data->blocks) { + /* Keep looping until the SDHCI_INT_DATA_END is + * cleared, even if we finished sending all the + * blocks. + */ + transfer_done = true; + continue; + } } #ifdef CONFIG_MMC_SDHCI_SDMA - if (stat & SDHCI_INT_DMA_END) { + if (!transfer_done && (stat & SDHCI_INT_DMA_END)) { sdhci_writel(host, SDHCI_INT_DMA_END, SDHCI_INT_STATUS); start_addr &= ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1); start_addr += SDHCI_DEFAULT_BOUNDARY_SIZE; -- 2.25.1