From 7dd8738f08144b01d91185f250af9ce2648cb25f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 9 Dec 2014 22:25:14 -0700 Subject: [PATCH] ARM: tegra: Enable PCIe on TrimSlice The TrimSlice has an ethernet NIC connected to the PCIe bus. Enable the PCIe controller and the network driver so that the device can boot over the network. Signed-off-by: Thierry Reding Signed-off-by: Simon Glass Signed-off-by: Tom Warren --- arch/arm/dts/tegra20-trimslice.dts | 69 ++++++++++++++++++++++++++++ board/compulab/trimslice/trimslice.c | 8 ++++ include/configs/trimslice.h | 10 ++++ 3 files changed, 87 insertions(+) diff --git a/arch/arm/dts/tegra20-trimslice.dts b/arch/arm/dts/tegra20-trimslice.dts index 74e8a16280..1637cbd58e 100644 --- a/arch/arm/dts/tegra20-trimslice.dts +++ b/arch/arm/dts/tegra20-trimslice.dts @@ -47,6 +47,20 @@ status = "disabled"; }; + pcie-controller@80003000 { + status = "okay"; + + avdd-pex-supply = <&pci_vdd_reg>; + vdd-pex-supply = <&pci_vdd_reg>; + avdd-pex-pll-supply = <&pci_vdd_reg>; + avdd-plle-supply = <&pci_vdd_reg>; + vddio-pex-clk-supply = <&pci_clk_reg>; + + pci@1,0 { + status = "okay"; + }; + }; + usb@c5000000 { nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */ }; @@ -66,4 +80,59 @@ wp-gpios = <&gpio 122 0>; /* gpio PP2 */ bus-width = <4>; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + hdmi_vdd_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + hdmi_pll_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(V, 2) 0>; + regulator-always-on; + regulator-boot-on; + }; + + pci_clk_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "pci_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pci_vdd_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "pci_vdd"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + }; + }; diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 723293fef3..c9da80d5eb 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -13,6 +13,7 @@ #include #include #include +#include void pin_mux_usb(void) { @@ -40,3 +41,10 @@ void pin_mux_mmc(void) /* For CD GPIO PP1 */ pinmux_tristate_disable(PMUX_PINGRP_DAP3); } + +#ifdef CONFIG_PCI +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} +#endif diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index a254f86409..59f4f6767b 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -60,6 +60,16 @@ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX +/* PCI host support */ +#define CONFIG_PCI +#define CONFIG_PCI_TEGRA +#define CONFIG_PCI_PNP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM + +/* PCI networking support */ +#define CONFIG_RTL8169 + /* General networking support */ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -- 2.25.1