From 79b079f35c31bab26e45a526bd128891ab6c5c1d Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Thu, 3 Apr 2014 07:52:56 -0400 Subject: [PATCH] dra7xx_evm: Add QSPI_4 support, qspiboot build target We previously only supported QSPI_1 (single) support. Add QSPI_4 (quad) read support as well. This means we can be given one of two boot device values, but don't care which it is, so perform a fixup on the QSPI_4 value. We add a qspiboot build target to better show how you would use QSPI as a boot device in deployment. When we boot from QSPI, we can check the environment for 'boot_os' to control Falcon Mode. Signed-off-by: Sourav Poddar Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/omap-common/boot-common.c | 11 ++++++ board/ti/dra7xx/evm.c | 19 ++++++++++ boards.cfg | 1 + include/configs/dra7xx_evm.h | 37 +++++++++++++++++++- 4 files changed, 67 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 52e0f4a6cf..3033564760 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -56,6 +56,17 @@ void save_omap_boot_params(void) *((u32 *)(dev_data + BOOT_MODE_OFFSET)); } } + +#ifdef CONFIG_DRA7XX + /* + * We get different values for QSPI_1 and QSPI_4 being used, but + * don't actually care about this difference. Rather than + * mangle the later code, if we're coming in as QSPI_4 just + * change to the QSPI_1 value. + */ + if (gd->arch.omap_boot_params.omap_bootdevice == 11) + gd->arch.omap_boot_params.omap_bootdevice = BOOT_DEVICE_SPI; +#endif } #ifdef CONFIG_SPL_BUILD diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index c6c4fd1743..073d15127c 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "mux_data.h" @@ -124,6 +125,24 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + +#ifdef CONFIG_SPL_ENV_SUPPORT + env_init(); + env_relocate_spec(); + if (getenv_yesno("boot_os") != 1) + return 1; +#endif + + return 0; +} +#endif + #ifdef CONFIG_DRIVER_TI_CPSW /* Delay value to add to calibrated value */ diff --git a/boards.cfg b/boards.cfg index b4203f1b57..23687c8bec 100644 --- a/boards.cfg +++ b/boards.cfg @@ -361,6 +361,7 @@ Active arm armv7 omap4 ti panda Active arm armv7 omap4 ti sdp4430 omap4_sdp4430 - Sricharan R Active arm armv7 omap5 ti dra7xx dra7xx_evm dra7xx_evm:CONS_INDEX=1 Lokesh Vutla Active arm armv7 omap5 ti dra7xx dra7xx_evm_uart3 dra7xx_evm:CONS_INDEX=3,SPL_YMODEM_SUPPORT Lokesh Vutla +Active arm armv7 omap5 ti dra7xx dra7xx_evm_qspiboot dra7xx_evm:CONS_INDEX=1,QSPI_BOOT Lokesh Vutla Active arm armv7 omap5 ti omap5_uevm omap5_uevm - - Active arm armv7 rmobile atmark-techno armadillo-800eva armadillo-800eva - Nobuhiro Iwamatsu Active arm armv7 rmobile kmc kzm9g kzm9g - Nobuhiro Iwamatsu :Tetsuyuki Kobayashi diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 99be52b287..8d0a0eb8bc 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -14,6 +14,7 @@ #define CONFIG_DRA7XX +#ifndef CONFIG_QSPI_BOOT /* MMC ENV related defines */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ @@ -21,6 +22,7 @@ #define CONFIG_ENV_OFFSET 0xE0000 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#endif #define CONFIG_CMD_SAVEENV #if (CONFIG_CONS_INDEX == 1) @@ -76,13 +78,46 @@ #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 +/* + * Default to using SPI for environment, etc. + * 0x000000 - 0x010000 : QSPI.SPL (64KiB) + * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB) + * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB) + * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB) + * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) + * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) + * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) + * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) + * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) + * 0x9E0000 - 0x2000000 : USERLAND + */ +#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 +#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 +#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 +#if defined(CONFIG_QSPI_BOOT) +/* In SPL, use the environment and discard MMC support for space. */ +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_SPL_MMC_SUPPORT +#undef CONFIG_SPL_MAX_SIZE +#define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */ +#endif +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_ENV_SIZE (64 << 10) +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ +#define CONFIG_ENV_OFFSET 0x1C0000 +#define CONFIG_ENV_OFFSET_REDUND 0x1D0000 +#endif + /* SPI SPL */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #define CONFIG_SUPPORT_EMMC_BOOT -- 2.25.1