From 7527feef06b13e9fd5b6d10a4bfc81b59ee56f27 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 9 Nov 2009 19:38:23 -0500 Subject: [PATCH] Blackfin: support boards with no external memory Signed-off-by: Mike Frysinger --- cpu/blackfin/initcode.c | 16 +++++++++++++++- cpu/blackfin/start.S | 6 ++++++ include/asm-blackfin/config.h | 9 +++++++-- lib_blackfin/board.c | 29 +++++++++++++++++++---------- lib_blackfin/u-boot.lds.S | 21 ++++++++++++++------- 5 files changed, 61 insertions(+), 20 deletions(-) diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c index bb588988bc..ed43f850de 100644 --- a/cpu/blackfin/initcode.c +++ b/cpu/blackfin/initcode.c @@ -538,10 +538,18 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs) * self-refresh. So we have to pull it out before programming. */ #ifdef EBIU_RSTCTL +# ifdef CONFIG_EBIU_RSTCTL_VAL bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL); +# endif +# ifdef CONFIG_EBIU_DDRCTL0_VAL bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL); +# endif +# ifdef CONFIG_EBIU_DDRCTL1_VAL bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL); +# endif +# ifdef CONFIG_EBIU_DDRCTL2_VAL bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL); +# endif # ifdef CONFIG_EBIU_DDRCTL3_VAL /* default is disable, so don't need to force this */ bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL); @@ -611,11 +619,17 @@ program_async_controller(ADI_BOOT_DATA *bs) serial_putc('b'); -#ifdef EBIU_MODE /* Not all parts have these additional MMRs. */ +#ifdef EBIU_MODE +# ifdef CONFIG_EBIU_MBSCTL_VAL bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); +# endif +# ifdef CONFIG_EBIU_MODE_VAL bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); +# endif +# ifdef CONFIG_EBIU_FCTL_VAL bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); +# endif #endif serial_putc('c'); diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S index 44e2725608..7a3abba21c 100644 --- a/cpu/blackfin/start.S +++ b/cpu/blackfin/start.S @@ -95,6 +95,7 @@ ENTRY(_start) /* Save RETX so we can pass it while booting Linux */ r7 = RETX; +#if CONFIG_MEM_SIZE /* Figure out where we are currently executing so that we can decide * how to best reprogram and relocate things. We'll pass below: * R4: load address of _start @@ -131,6 +132,9 @@ ENTRY(_start) r3.h = 0x2000; cc = r5 < r3 (iu); if cc jump .Ldma_and_reprogram; +#else + r6 = 1 (x); /* fake loaded_from_ldr = 1 */ +#endif r0 = 0 (x); /* set bootstruct to NULL */ call _initcode; jump .Lprogrammed; @@ -154,6 +158,7 @@ ENTRY(_start) .Lprogrammed: serial_early_set_baud +#if CONFIG_MEM_SIZE /* Relocate from wherever we are (FLASH/RAM/etc...) to the hardcoded * monitor location in the end of RAM. We know that memcpy() only * uses registers, so it is safe to call here. Note that this only @@ -166,6 +171,7 @@ ENTRY(_start) r2.l = LO(CONFIG_SYS_MONITOR_LEN); r2.h = HI(CONFIG_SYS_MONITOR_LEN); call _memcpy_ASM; +#endif /* Initialize BSS section ... we know that memset() does not * use the BSS, so it is safe to call here. The bootrom LDR diff --git a/include/asm-blackfin/config.h b/include/asm-blackfin/config.h index fbfd59882e..0ae838abea 100644 --- a/include/asm-blackfin/config.h +++ b/include/asm-blackfin/config.h @@ -92,7 +92,11 @@ # define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) #endif #ifndef CONFIG_SYS_MONITOR_BASE -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN) +# if CONFIG_SYS_MAX_RAM_SIZE +# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN) +# else +# define CONFIG_SYS_MONITOR_BASE 0 +# endif #endif #ifndef CONFIG_SYS_MALLOC_BASE # define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) @@ -114,7 +118,8 @@ #endif /* Check to make sure everything fits in external RAM */ -#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE) +#if CONFIG_SYS_MAX_RAM_SIZE && \ + ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE) # error Memory Map does not fit into configuration #endif diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c index b414b2a0f3..ed4e77b4bc 100644 --- a/lib_blackfin/board.c +++ b/lib_blackfin/board.c @@ -130,17 +130,26 @@ void init_cplbtables(void) dcplb_add(0xFF800000, L1_DMEMORY); ++i; - icplb_add(CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_IKERNEL); - dcplb_add(CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_DKERNEL); - ++i; - - /* If the monitor crosses a 4 meg boundary, we'll need - * to lock two entries for it. - */ - if ((CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK) != ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK)) { - icplb_add((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_IKERNEL); - dcplb_add((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_DKERNEL); + if (CONFIG_MEM_SIZE) { + uint32_t mbase = CONFIG_SYS_MONITOR_BASE; + uint32_t mend = mbase + CONFIG_SYS_MONITOR_LEN; + mbase &= CPLB_PAGE_MASK; + mend &= CPLB_PAGE_MASK; + + icplb_add(mbase, SDRAM_IKERNEL); + dcplb_add(mbase, SDRAM_DKERNEL); ++i; + + /* + * If the monitor crosses a 4 meg boundary, we'll need + * to lock two entries for it. We assume it doesn't + * cross two 4 meg boundaries ... + */ + if (mbase != mend) { + icplb_add(mend, SDRAM_IKERNEL); + dcplb_add(mend, SDRAM_DKERNEL); + ++i; + } } icplb_add(0x20000000, SDRAM_INON_CHBL); diff --git a/lib_blackfin/u-boot.lds.S b/lib_blackfin/u-boot.lds.S index 8a9e8b1c2b..deb94c9762 100644 --- a/lib_blackfin/u-boot.lds.S +++ b/lib_blackfin/u-boot.lds.S @@ -57,7 +57,14 @@ OUTPUT_ARCH(bfin) MEMORY { +#if CONFIG_MEM_SIZE ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN +# define ram_code ram +# define ram_data ram +#else +# define ram_code l1_code +# define ram_data l1_data +#endif l1_code : ORIGIN = L1_CODE_ORIGIN, LENGTH = L1_INST_SRAM_SIZE l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE } @@ -82,7 +89,7 @@ SECTIONS .text : { *(.text .text.*) - } >ram + } >ram_code .rodata : { @@ -91,7 +98,7 @@ SECTIONS *(.rodata1) *(.eh_frame) . = ALIGN(4); - } >ram + } >ram_data .data : { @@ -102,14 +109,14 @@ SECTIONS *(.sdata2) *(.dynamic) CONSTRUCTORS - } >ram + } >ram_data .u_boot_cmd : { ___u_boot_cmd_start = .; *(.u_boot_cmd) ___u_boot_cmd_end = .; - } >ram + } >ram_data .text_l1 : { @@ -118,7 +125,7 @@ SECTIONS *(.l1.text) . = ALIGN(4); __etext_l1 = .; - } >l1_code AT>ram + } >l1_code AT>ram_code __text_l1_lma = LOADADDR(.text_l1); __text_l1_len = SIZEOF(.text_l1); ASSERT (__text_l1_len <= L1_INST_SRAM_SIZE, "L1 text overflow!") @@ -131,7 +138,7 @@ SECTIONS *(.l1.bss) . = ALIGN(4); __edata_l1 = .; - } >l1_data AT>ram + } >l1_data AT>ram_data __data_l1_lma = LOADADDR(.data_l1); __data_l1_len = SIZEOF(.data_l1); ASSERT (__data_l1_len <= L1_DATA_B_SRAM_SIZE, "L1 data B overflow!") @@ -143,7 +150,7 @@ SECTIONS *(.dynbss) *(.bss .bss.*) *(COMMON) - } >ram + } >ram_data __bss_vma = ADDR(.bss); __bss_len = SIZEOF(.bss); } -- 2.25.1