From 74b1687be31f3682c411e7f0ea6c7de6cff57cb3 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Sat, 21 May 2016 12:13:35 +0200 Subject: [PATCH] uboot-lantiq: drop unused board patches None of the boards is supported by lede. No need to keep the patches in the lede tree. Signed-off-by: Mathias Kresin --- ...add-board-support-for-ZTE-ZXHN-H367N.patch | 307 ------------------ ...dd-board-support-for-ZTE-ZXV10-H201L.patch | 251 -------------- ...-board-support-for-ZyXEL-P-661HNU-Fx.patch | 304 ----------------- ...-board-support-for-ZyXEL-P-2601HN-Fx.patch | 242 -------------- ...board-support-for-ZyXEL-P-2812HNU-Fx.patch | 8 +- ...ard-support-for-Arcadyan-Easybox-904.patch | 277 ---------------- ...ard-support-for-Arcadyan-VGV7510KW22.patch | 4 +- 7 files changed, 6 insertions(+), 1387 deletions(-) delete mode 100644 package/boot/uboot-lantiq/patches/0031-MIPS-add-board-support-for-ZTE-ZXHN-H367N.patch delete mode 100644 package/boot/uboot-lantiq/patches/0032-MIPS-add-board-support-for-ZTE-ZXV10-H201L.patch delete mode 100644 package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch delete mode 100644 package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch delete mode 100644 package/boot/uboot-lantiq/patches/0036-MIPS-add-board-support-for-Arcadyan-Easybox-904.patch diff --git a/package/boot/uboot-lantiq/patches/0031-MIPS-add-board-support-for-ZTE-ZXHN-H367N.patch b/package/boot/uboot-lantiq/patches/0031-MIPS-add-board-support-for-ZTE-ZXHN-H367N.patch deleted file mode 100644 index ba63b2c690..0000000000 --- a/package/boot/uboot-lantiq/patches/0031-MIPS-add-board-support-for-ZTE-ZXHN-H367N.patch +++ /dev/null @@ -1,307 +0,0 @@ -From 0597056e2ba19ea783ef5c3d14c75c4722740e48 Mon Sep 17 00:00:00 2001 -From: Luka Perkov -Date: Sun, 10 Mar 2013 17:59:56 +0100 -Subject: MIPS: add board support for ZTE ZXHN H367N - -Signed-off-by: Luka Perkov - ---- /dev/null -+++ b/board/zte/zxhnh367n/Makefile -@@ -0,0 +1,27 @@ -+# -+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).o -+ -+COBJS = $(BOARD).o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### ---- /dev/null -+++ b/board/zte/zxhnh367n/config.mk -@@ -0,0 +1,7 @@ -+# -+# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR) ---- /dev/null -+++ b/board/zte/zxhnh367n/ddr_settings.h -@@ -0,0 +1,70 @@ -+/* -+ * Copyright (C) 2013 Luka Perkov -+ * -+ * The values have been extracted from original ZTE U-Boot. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#define MC_CCR00_VALUE 0x101 -+#define MC_CCR01_VALUE 0x1000101 -+#define MC_CCR02_VALUE 0x1010000 -+#define MC_CCR03_VALUE 0x100 -+#define MC_CCR04_VALUE 0x1000000 -+#define MC_CCR05_VALUE 0x1000101 -+#define MC_CCR06_VALUE 0x1000100 -+#define MC_CCR07_VALUE 0x1010000 -+#define MC_CCR08_VALUE 0x1000101 -+#define MC_CCR09_VALUE 0x0 -+#define MC_CCR10_VALUE 0x2000100 -+#define MC_CCR11_VALUE 0x2000401 -+#define MC_CCR12_VALUE 0x30000 -+#define MC_CCR13_VALUE 0x202 -+#define MC_CCR14_VALUE 0x7080A0F -+#define MC_CCR15_VALUE 0x2040F -+#define MC_CCR16_VALUE 0x40000 -+#define MC_CCR17_VALUE 0x70102 -+#define MC_CCR18_VALUE 0x4020002 -+#define MC_CCR19_VALUE 0x30302 -+#define MC_CCR20_VALUE 0x8000700 -+#define MC_CCR21_VALUE 0x40F020A -+#define MC_CCR22_VALUE 0x0 -+#define MC_CCR23_VALUE 0xC020000 -+#define MC_CCR24_VALUE 0x4401B04 -+#define MC_CCR25_VALUE 0x0 -+#define MC_CCR26_VALUE 0x0 -+#define MC_CCR27_VALUE 0x6420000 -+#define MC_CCR28_VALUE 0x0 -+#define MC_CCR29_VALUE 0x0 -+#define MC_CCR30_VALUE 0x798 -+#define MC_CCR31_VALUE 0x0 -+#define MC_CCR32_VALUE 0x0 -+#define MC_CCR33_VALUE 0x650000 -+#define MC_CCR34_VALUE 0x200C8 -+#define MC_CCR35_VALUE 0x1D445D -+#define MC_CCR36_VALUE 0xC8 -+#define MC_CCR37_VALUE 0xC351 -+#define MC_CCR38_VALUE 0x0 -+#define MC_CCR39_VALUE 0x141F04 -+#define MC_CCR40_VALUE 0x142704 -+#define MC_CCR41_VALUE 0x141B42 -+#define MC_CCR42_VALUE 0x141B42 -+#define MC_CCR43_VALUE 0x566504 -+#define MC_CCR44_VALUE 0x566504 -+#define MC_CCR45_VALUE 0x565F17 -+#define MC_CCR46_VALUE 0x565F17 -+#define MC_CCR47_VALUE 0x0 -+#define MC_CCR48_VALUE 0x0 -+#define MC_CCR49_VALUE 0x0 -+#define MC_CCR50_VALUE 0x0 -+#define MC_CCR51_VALUE 0x0 -+#define MC_CCR52_VALUE 0x133 -+#define MC_CCR53_VALUE 0xF3014B27 -+#define MC_CCR54_VALUE 0xF3014B27 -+#define MC_CCR55_VALUE 0xF3014B27 -+#define MC_CCR56_VALUE 0xF3014B27 -+#define MC_CCR57_VALUE 0x7800301 -+#define MC_CCR58_VALUE 0x7800301 -+#define MC_CCR59_VALUE 0x7800301 -+#define MC_CCR60_VALUE 0x7800301 -+#define MC_CCR61_VALUE 0x4 ---- /dev/null -+++ b/board/zte/zxhnh367n/zxhnh367n.c -@@ -0,0 +1,97 @@ -+/* -+ * Copyright (C) 2013 Luka Perkov -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if defined(CONFIG_SPL_BUILD) -+#define do_gpio_init 1 -+#define do_pll_init 1 -+#define do_dcdc_init 0 -+#elif defined(CONFIG_SYS_BOOT_RAM) -+#define do_gpio_init 1 -+#define do_pll_init 0 -+#define do_dcdc_init 1 -+#else -+#define do_gpio_init 0 -+#define do_pll_init 0 -+#define do_dcdc_init 1 -+#endif -+ -+static void gpio_init(void) -+{ -+ /* EBU.FL_CS1 as output for NAND CE */ -+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); -+ /* EBU.FL_A23 as output for NAND CLE */ -+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); -+ /* EBU.FL_A24 as output for NAND ALE */ -+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); -+ /* GPIO 3.0 as input for NAND Ready Busy */ -+ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN); -+ /* GPIO 3.1 as output for NAND Read */ -+ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); -+} -+ -+int board_early_init_f(void) -+{ -+ if (do_gpio_init) -+ gpio_init(); -+ -+ if (do_pll_init) -+ ltq_pll_init(); -+ -+ if (do_dcdc_init) -+ ltq_dcdc_init(0x7F); -+ -+ return 0; -+} -+ -+int checkboard(void) -+{ -+ puts("Board: " CONFIG_BOARD_NAME "\n"); -+ ltq_chip_print_info(); -+ -+ return 0; -+} -+ -+static const struct ltq_eth_port_config eth_port_config[] = { -+ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */ -+ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII }, -+ /* GMAC1: unused */ -+ { 1, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE }, -+ /* GMAC2: internal GPHY0 with 10/100 firmware for LAN port 1 */ -+ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII }, -+ /* GMAC3: internal GPHY0 with 10/100 firmware for LAN port 2 */ -+ { 3, 0x12, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII }, -+ /* GMAC4: internal GPHY1 with 10/100 firmware for LAN port 3 */ -+ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII }, -+ /* GMAC5: internal GPHY1 with 10/100 firmware for LAN port 4 */ -+ { 5, 0x14, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII }, -+}; -+ -+static const struct ltq_eth_board_config eth_board_config = { -+ .ports = eth_port_config, -+ .num_ports = ARRAY_SIZE(eth_port_config), -+}; -+ -+int board_eth_init(bd_t * bis) -+{ -+ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0; -+ const ulong fw_addr = 0x80FF0000; -+ -+ ltq_gphy_phy22f_a2x_load(fw_addr); -+ -+ ltq_cgu_gphy_clk_src(clk); -+ -+ ltq_rcu_gphy_boot(0, fw_addr); -+ ltq_rcu_gphy_boot(1, fw_addr); -+ -+ return ltq_eth_initialize(ð_board_config); -+} ---- a/boards.cfg -+++ b/boards.cfg -@@ -527,6 +527,9 @@ Active mips mips32 vrx20 - Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck - Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck - Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck -+Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_nandspl zxhnh367n:SYS_BOOT_NANDSPL Luka Perkov -+Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_ram zxhnh367n:SYS_BOOT_RAM Luka Perkov -+Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_zte zxhnh367n:SYS_BOOT_ZTE Luka Perkov - Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN - - Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN - - Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes ---- /dev/null -+++ b/include/configs/zxhnh367n.h -@@ -0,0 +1,72 @@ -+/* -+ * Copyright (C) 2013 Luka Perkov -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#define CONFIG_MACH_TYPE "ZXHN H367N" -+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE -+#define CONFIG_BOARD_NAME "ZTE ZXHN H367N" -+ -+/* Configure SoC */ -+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ -+ -+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */ -+ -+#define CONFIG_LTQ_SUPPORT_NAND_FLASH /* Have a NAND flash */ -+ -+#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */ -+#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */ -+#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */ -+ -+#define CONFIG_SYS_NAND_PAGE_COUNT 128 -+#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -+#define CONFIG_SYS_NAND_OOBSIZE 64 -+#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) -+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000 -+ -+#define CONFIG_SYS_DRAM_PROBE -+ -+/* Environment */ -+#if defined(CONFIG_SYS_BOOT_NANDSPL) -+#define CONFIG_ENV_IS_IN_NAND -+#define CONFIG_ENV_OVERWRITE -+#define CONFIG_ENV_OFFSET (256 * 1024) -+#define CONFIG_ENV_SECT_SIZE (256 * 1024) -+#else -+#define CONFIG_ENV_IS_NOWHERE -+#endif -+ -+#define CONFIG_ENV_SIZE (8 * 1024) -+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR -+ -+#if defined(CONFIG_SYS_BOOT_ZTE) -+#define CONFIG_SYS_TEXT_BASE 0x80800000 -+#define CONFIG_SKIP_LOWLEVEL_INIT -+#endif -+ -+/* Console */ -+#define CONFIG_LTQ_ADVANCED_CONSOLE -+#define CONFIG_BAUDRATE 115200 -+#define CONFIG_CONSOLE_ASC 1 -+#define CONFIG_CONSOLE_DEV "ttyLTQ1" -+ -+/* Pull in default board configs for Lantiq XWAY VRX200 */ -+#include -+#include -+ -+/* Pull in default OpenWrt configs for Lantiq SoC */ -+#include "openwrt-lantiq-common.h" -+ -+#define CONFIG_ENV_UPDATE_UBOOT_NAND \ -+ "update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0" -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ CONFIG_ENV_LANTIQ_DEFAULTS \ -+ CONFIG_ENV_UPDATE_UBOOT_NAND -+ -+#endif /* __CONFIG_H */ diff --git a/package/boot/uboot-lantiq/patches/0032-MIPS-add-board-support-for-ZTE-ZXV10-H201L.patch b/package/boot/uboot-lantiq/patches/0032-MIPS-add-board-support-for-ZTE-ZXV10-H201L.patch deleted file mode 100644 index eb77f96e4e..0000000000 --- a/package/boot/uboot-lantiq/patches/0032-MIPS-add-board-support-for-ZTE-ZXV10-H201L.patch +++ /dev/null @@ -1,251 +0,0 @@ -From 2473526cf879ead429c6aa1fb7fb77ed3407baaa Mon Sep 17 00:00:00 2001 -From: Daniel Schwierzeck -Date: Sun, 9 Dec 2012 17:35:09 +0100 -Subject: MIPS: add board support for ZTE ZXV10 H201L - -Signed-off-by: Daniel Schwierzeck - ---- /dev/null -+++ b/board/zte/zxv10h201l/Makefile -@@ -0,0 +1,27 @@ -+# -+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).o -+ -+COBJS = $(BOARD).o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### ---- /dev/null -+++ b/board/zte/zxv10h201l/config.mk -@@ -0,0 +1,7 @@ -+# -+# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR) ---- /dev/null -+++ b/board/zte/zxv10h201l/ddr_settings.h -@@ -0,0 +1,55 @@ -+/* -+ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+ * -+ * The values have been extracted from original ZTE U-Boot. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#define MC_DC00_VALUE 0x1B1B -+#define MC_DC01_VALUE 0x0 -+#define MC_DC02_VALUE 0x0 -+#define MC_DC03_VALUE 0x0 -+#define MC_DC04_VALUE 0x0 -+#define MC_DC05_VALUE 0x200 -+#define MC_DC06_VALUE 0x307 -+#define MC_DC07_VALUE 0x303 -+#define MC_DC08_VALUE 0x103 -+#define MC_DC09_VALUE 0x80B -+#define MC_DC10_VALUE 0x203 -+#define MC_DC11_VALUE 0xE02 -+#define MC_DC12_VALUE 0x2C8 -+#define MC_DC13_VALUE 0x1 -+#define MC_DC14_VALUE 0x0 -+#define MC_DC15_VALUE 0x100 -+#define MC_DC16_VALUE 0xC800 -+#define MC_DC17_VALUE 0xF -+#define MC_DC18_VALUE 0x301 -+#define MC_DC19_VALUE 0x200 -+#define MC_DC20_VALUE 0xA04 -+#define MC_DC21_VALUE 0x1600 -+#define MC_DC22_VALUE 0x1616 -+#define MC_DC23_VALUE 0x0 -+#define MC_DC24_VALUE 0x5D -+#define MC_DC25_VALUE 0x0 -+#define MC_DC26_VALUE 0x0 -+#define MC_DC27_VALUE 0x0 -+#define MC_DC28_VALUE 0x5FB -+#define MC_DC29_VALUE 0x35DF -+#define MC_DC30_VALUE 0x99E9 -+#define MC_DC31_VALUE 0x0 -+#define MC_DC32_VALUE 0x0 -+#define MC_DC33_VALUE 0x0 -+#define MC_DC34_VALUE 0x0 -+#define MC_DC35_VALUE 0x0 -+#define MC_DC36_VALUE 0x0 -+#define MC_DC37_VALUE 0x0 -+#define MC_DC38_VALUE 0x0 -+#define MC_DC39_VALUE 0x0 -+#define MC_DC40_VALUE 0x0 -+#define MC_DC41_VALUE 0x0 -+#define MC_DC42_VALUE 0x0 -+#define MC_DC43_VALUE 0x0 -+#define MC_DC44_VALUE 0x0 -+#define MC_DC45_VALUE 0x600 -+#define MC_DC46_VALUE 0x0 ---- /dev/null -+++ b/board/zte/zxv10h201l/zxv10h201l.c -@@ -0,0 +1,51 @@ -+/* -+ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+int board_early_init_f(void) -+{ -+ return 0; -+} -+ -+int checkboard(void) -+{ -+ puts("Board: " CONFIG_BOARD_NAME "\n"); -+ ltq_chip_print_info(); -+ -+ return 0; -+} -+ -+static const struct ltq_eth_port_config eth_port_config[] = { -+ /* MAC0: REALTEK RTL8306 switch */ -+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII }, -+}; -+ -+static const struct ltq_eth_board_config eth_board_config = { -+ .ports = eth_port_config, -+ .num_ports = ARRAY_SIZE(eth_port_config), -+}; -+ -+int board_eth_init(bd_t *bis) -+{ -+ return ltq_eth_initialize(ð_board_config); -+} -+ -+static struct switch_device rtl8306_dev = { -+ .name = "rtl8306", -+ .cpu_port = 5, -+ .port_mask = 0xF, -+}; -+ -+int board_switch_init(void) -+{ -+ return switch_device_register(&rtl8306_dev); -+} ---- a/boards.cfg -+++ b/boards.cfg -@@ -496,6 +496,9 @@ Active mips mips32 - - Active mips mips32 - micronas vct vct_premium_onenand vct:VCT_PREMIUM,VCT_ONENAND - - Active mips mips32 - micronas vct vct_premium_onenand_small vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE - - Active mips mips32 - micronas vct vct_premium_small vct:VCT_PREMIUM,VCT_SMALL_IMAGE - -+Active mips mips32 arx100 zte zxv10h201l zxv10h201l_nor zxv10h201l:SYS_BOOT_NOR Luka Perkov -+Active mips mips32 arx100 zte zxv10h201l zxv10h201l_ram zxv10h201l:SYS_BOOT_RAM Luka Perkov -+Active mips mips32 arx100 zte zxv10h201l zxv10h201l_zte zxv10h201l:SYS_BOOT_ZTE Luka Perkov - Active mips mips32 au1x00 - dbau1x00 dbau1000 dbau1x00:DBAU1000 Thomas Lange - Active mips mips32 au1x00 - dbau1x00 dbau1100 dbau1x00:DBAU1100 Thomas Lange - Active mips mips32 au1x00 - dbau1x00 dbau1500 dbau1x00:DBAU1500 Thomas Lange ---- /dev/null -+++ b/include/configs/zxv10h201l.h -@@ -0,0 +1,77 @@ -+/* -+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#define CONFIG_MACH_TYPE "ZXV10 H201L" -+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE -+#define CONFIG_BOARD_NAME "ZTE ZXV10 H201L" -+ -+/* Configure SoC */ -+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ -+ -+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */ -+ -+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */ -+ -+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */ -+#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */ -+#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */ -+ -+/* Switch devices */ -+#define CONFIG_SWITCH_MULTI -+#define CONFIG_SWITCH_RTL8306 -+ -+/* Environment */ -+#if defined(CONFIG_SYS_BOOT_NOR) -+#define CONFIG_ENV_IS_IN_FLASH -+#define CONFIG_ENV_OVERWRITE -+#define CONFIG_ENV_OFFSET (256 * 1024) -+#define CONFIG_ENV_SECT_SIZE (64 * 1024) -+#elif defined(CONFIG_SYS_BOOT_NORSPL) -+#define CONFIG_ENV_IS_IN_FLASH -+#define CONFIG_ENV_OVERWRITE -+#define CONFIG_ENV_OFFSET (128 * 1024) -+#define CONFIG_ENV_SECT_SIZE (64 * 1024) -+#else -+#define CONFIG_ENV_IS_NOWHERE -+#endif -+ -+#define CONFIG_ENV_SIZE (8 * 1024) -+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR -+ -+#if defined(CONFIG_SYS_BOOT_ZTE) -+#define CONFIG_SYS_TEXT_BASE 0x80800000 -+#define CONFIG_SKIP_LOWLEVEL_INIT -+#endif -+ -+/* Console */ -+#define CONFIG_LTQ_ADVANCED_CONSOLE -+#define CONFIG_BAUDRATE 115200 -+#define CONFIG_CONSOLE_ASC 1 -+#define CONFIG_CONSOLE_DEV "ttyLTQ1" -+ -+/* Pull in default board configs for Lantiq XWAY Danube */ -+#include -+#include -+ -+#if defined(CONFIG_SYS_BOOT_ZTE) -+#define CONFIG_SYS_TEXT_BASE 0x80800000 -+#define CONFIG_SKIP_LOWLEVEL_INIT -+#endif -+ -+/* Pull in default OpenWrt configs for Lantiq SoC */ -+#include "openwrt-lantiq-common.h" -+ -+#define CONFIG_ENV_UPDATE_UBOOT_NOR \ -+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0" -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ CONFIG_ENV_LANTIQ_DEFAULTS \ -+ CONFIG_ENV_UPDATE_UBOOT_NOR -+ -+#endif /* __CONFIG_H */ diff --git a/package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch b/package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch deleted file mode 100644 index 38d7856d32..0000000000 --- a/package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch +++ /dev/null @@ -1,304 +0,0 @@ -From a18f994f373db4467a4680f83ead997c8122908e Mon Sep 17 00:00:00 2001 -From: Daniel Schwierzeck -Date: Wed, 22 May 2013 17:48:08 +0200 -Subject: MIPS: add board support for ZyXEL P-661HNU-Fx - -Signed-off-by: Daniel Schwierzeck - ---- /dev/null -+++ b/board/zyxel/p661hnufx/Makefile -@@ -0,0 +1,27 @@ -+# -+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).o -+ -+COBJS = $(BOARD).o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### ---- /dev/null -+++ b/board/zyxel/p661hnufx/config.mk -@@ -0,0 +1,7 @@ -+# -+# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR) ---- /dev/null -+++ b/board/zyxel/p661hnufx/ddr_settings.h -@@ -0,0 +1,55 @@ -+/* -+ * Copyright (C) 2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+ * -+ * The values have been extracted from original ZyXEL U-Boot. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#define MC_DC00_VALUE 0x1B1B -+#define MC_DC01_VALUE 0x0 -+#define MC_DC02_VALUE 0x0 -+#define MC_DC03_VALUE 0x0 -+#define MC_DC04_VALUE 0x0 -+#define MC_DC05_VALUE 0x200 -+#define MC_DC06_VALUE 0x307 -+#define MC_DC07_VALUE 0x303 -+#define MC_DC08_VALUE 0x103 -+#define MC_DC09_VALUE 0x80B -+#define MC_DC10_VALUE 0x203 -+#define MC_DC11_VALUE 0xE02 -+#define MC_DC12_VALUE 0x2C8 -+#define MC_DC13_VALUE 0x1 -+#define MC_DC14_VALUE 0x0 -+#define MC_DC15_VALUE 0x100 -+#define MC_DC16_VALUE 0xC800 -+#define MC_DC17_VALUE 0xF -+#define MC_DC18_VALUE 0x301 -+#define MC_DC19_VALUE 0x200 -+#define MC_DC20_VALUE 0xA04 -+#define MC_DC21_VALUE 0x1600 -+#define MC_DC22_VALUE 0x1616 -+#define MC_DC23_VALUE 0x0 -+#define MC_DC24_VALUE 0x5D -+#define MC_DC25_VALUE 0x0 -+#define MC_DC26_VALUE 0x0 -+#define MC_DC27_VALUE 0x0 -+#define MC_DC28_VALUE 0x5FB -+#define MC_DC29_VALUE 0x35DF -+#define MC_DC30_VALUE 0x99E9 -+#define MC_DC31_VALUE 0x0 -+#define MC_DC32_VALUE 0x0 -+#define MC_DC33_VALUE 0x0 -+#define MC_DC34_VALUE 0x0 -+#define MC_DC35_VALUE 0x0 -+#define MC_DC36_VALUE 0x0 -+#define MC_DC37_VALUE 0x0 -+#define MC_DC38_VALUE 0x0 -+#define MC_DC39_VALUE 0x0 -+#define MC_DC40_VALUE 0x0 -+#define MC_DC41_VALUE 0x0 -+#define MC_DC42_VALUE 0x0 -+#define MC_DC43_VALUE 0x0 -+#define MC_DC44_VALUE 0x0 -+#define MC_DC45_VALUE 0x600 -+#define MC_DC46_VALUE 0x0 ---- /dev/null -+++ b/board/zyxel/p661hnufx/p661hnufx.c -@@ -0,0 +1,102 @@ -+/* -+ * Copyright (C) 2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static void gpio_init(void) -+{ -+ /* SPI CS 0.4 to serial flash */ -+ gpio_direction_output(10, 1); -+} -+ -+int board_early_init_f(void) -+{ -+ gpio_init(); -+ -+ return 0; -+} -+ -+int checkboard(void) -+{ -+ puts("Board: " CONFIG_BOARD_NAME "\n"); -+ ltq_chip_print_info(); -+ -+ return 0; -+} -+ -+static const struct ltq_eth_port_config eth_port_config[] = { -+ /* MAC0: Lantiq Tantos switch */ -+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII }, -+ /* MAC1: unused */ -+ { 1, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE }, -+}; -+ -+static const struct ltq_eth_board_config eth_board_config = { -+ .ports = eth_port_config, -+ .num_ports = ARRAY_SIZE(eth_port_config), -+}; -+ -+int board_eth_init(bd_t *bis) -+{ -+ return ltq_eth_initialize(ð_board_config); -+} -+ -+static struct switch_device psb697x_dev = { -+ .name = "psb697x", -+ .cpu_port = 5, -+ .port_mask = 0xF, -+}; -+ -+int board_switch_init(void) -+{ -+ printf("%s\n", __func__); -+ -+#if 0 -+ ltq_reset_once(LTQ_RESET_HARD, 200000); -+ __udelay(50000); -+#endif -+ -+ return switch_device_register(&psb697x_dev); -+} -+ -+int spi_cs_is_valid(unsigned int bus, unsigned int cs) -+{ -+ if (bus) -+ return 0; -+ -+ if (cs == 4) -+ return 1; -+ -+ return 0; -+} -+ -+void spi_cs_activate(struct spi_slave *slave) -+{ -+ switch (slave->cs) { -+ case 4: -+ gpio_set_value(10, 0); -+ break; -+ default: -+ break; -+ } -+} -+ -+void spi_cs_deactivate(struct spi_slave *slave) -+{ -+ switch (slave->cs) { -+ case 4: -+ gpio_set_value(10, 1); -+ break; -+ default: -+ break; -+ } -+} ---- a/boards.cfg -+++ b/boards.cfg -@@ -499,6 +499,9 @@ Active mips mips32 - - Active mips mips32 arx100 zte zxv10h201l zxv10h201l_nor zxv10h201l:SYS_BOOT_NOR Luka Perkov - Active mips mips32 arx100 zte zxv10h201l zxv10h201l_ram zxv10h201l:SYS_BOOT_RAM Luka Perkov - Active mips mips32 arx100 zte zxv10h201l zxv10h201l_zte zxv10h201l:SYS_BOOT_ZTE Luka Perkov -+Active mips mips32 arx100 zyxel p661hnufx p661hnufx_ram p661hnufx:SYS_BOOT_RAM Luka Perkov -+Active mips mips32 arx100 zyxel p661hnufx p661hnufx_sfspl p661hnufx:SYS_BOOT_SFSPL Luka Perkov -+Active mips mips32 arx100 zyxel p661hnufx p661hnufx_zyxel p661hnufx:SYS_BOOT_ZYXEL Luka Perkov - Active mips mips32 au1x00 - dbau1x00 dbau1000 dbau1x00:DBAU1000 Thomas Lange - Active mips mips32 au1x00 - dbau1x00 dbau1100 dbau1x00:DBAU1100 Thomas Lange - Active mips mips32 au1x00 - dbau1x00 dbau1500 dbau1x00:DBAU1500 Thomas Lange ---- /dev/null -+++ b/include/configs/p661hnufx.h -@@ -0,0 +1,79 @@ -+/* -+ * Copyright (C) 2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#define CONFIG_MACH_TYPE "P-661HNU-Fx" -+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE -+#define CONFIG_BOARD_NAME "ZyXEL P-661HNU-Fx" -+ -+/* Configure SoC */ -+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ -+ -+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */ -+ -+#define CONFIG_LTQ_SUPPORT_SPI_FLASH -+#define CONFIG_SPI_FLASH_MACRONIX /* Supports Macronix serial flash */ -+#define CONFIG_SPI_FLASH_4BYTE_MODE -+ -+#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */ -+#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */ -+#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */ -+ -+#define CONFIG_SPL_SPI_BUS 0 -+#define CONFIG_SPL_SPI_CS 4 -+#define CONFIG_SPL_SPI_MAX_HZ 25000000 -+#define CONFIG_SPL_SPI_MODE 0 -+ -+/* Switch devices */ -+#define CONFIG_SWITCH_MULTI -+#define CONFIG_SWITCH_PSB697X -+ -+/* Environment */ -+#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS -+#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS -+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ -+#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE -+ -+#if defined(CONFIG_SYS_BOOT_SFSPL) -+#define CONFIG_ENV_IS_IN_SPI_FLASH -+#define CONFIG_ENV_OVERWRITE -+#define CONFIG_ENV_OFFSET (512 * 1024) -+#define CONFIG_ENV_SECT_SIZE (256 * 1024) -+#else -+#define CONFIG_ENV_IS_NOWHERE -+#endif -+ -+#define CONFIG_ENV_SIZE (8 * 1024) -+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR -+ -+#if defined(CONFIG_SYS_BOOT_ZYXEL) -+#define CONFIG_SYS_TEXT_BASE 0x80800000 -+#define CONFIG_SKIP_LOWLEVEL_INIT -+#endif -+ -+/* Console */ -+#define CONFIG_LTQ_ADVANCED_CONSOLE -+#define CONFIG_BAUDRATE 115200 -+#define CONFIG_CONSOLE_ASC 1 -+#define CONFIG_CONSOLE_DEV "ttyLTQ1" -+ -+/* Pull in default board configs for Lantiq XWAY Danube */ -+#include -+#include -+ -+/* Pull in default OpenWrt configs for Lantiq SoC */ -+#include "openwrt-lantiq-common.h" -+ -+#define CONFIG_ENV_UPDATE_UBOOT_SF \ -+ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0" -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ CONFIG_ENV_LANTIQ_DEFAULTS \ -+ CONFIG_ENV_UPDATE_UBOOT_SF -+ -+#endif /* __CONFIG_H */ diff --git a/package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch b/package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch deleted file mode 100644 index 2cf66e49a2..0000000000 --- a/package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch +++ /dev/null @@ -1,242 +0,0 @@ -From 4bfa74583bc938d2da41f255f22baa1845332893 Mon Sep 17 00:00:00 2001 -From: Luka Perkov -Date: Tue, 12 Mar 2013 01:42:46 +0100 -Subject: MIPS: add board support for ZyXEL P-2601HN-Fx - -Signed-off-by: Luka Perkov - ---- /dev/null -+++ b/board/zyxel/p2601hnfx/Makefile -@@ -0,0 +1,27 @@ -+# -+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).o -+ -+COBJS = $(BOARD).o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### ---- /dev/null -+++ b/board/zyxel/p2601hnfx/config.mk -@@ -0,0 +1,7 @@ -+# -+# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR) ---- /dev/null -+++ b/board/zyxel/p2601hnfx/ddr_settings.h -@@ -0,0 +1,55 @@ -+/* -+ * Copyright (C) 2013 Luka Perkov -+ * -+ * The values have been extracted from original ZyXEL U-Boot. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#define MC_DC00_VALUE 0x1B1B -+#define MC_DC01_VALUE 0x0 -+#define MC_DC02_VALUE 0x0 -+#define MC_DC03_VALUE 0x0 -+#define MC_DC04_VALUE 0x0 -+#define MC_DC05_VALUE 0x200 -+#define MC_DC06_VALUE 0x306 -+#define MC_DC07_VALUE 0x303 -+#define MC_DC08_VALUE 0x102 -+#define MC_DC09_VALUE 0x70A -+#define MC_DC10_VALUE 0x203 -+#define MC_DC11_VALUE 0xC02 -+#define MC_DC12_VALUE 0x1C8 -+#define MC_DC13_VALUE 0x1 -+#define MC_DC14_VALUE 0x0 -+#define MC_DC15_VALUE 0x144 -+#define MC_DC16_VALUE 0xC800 -+#define MC_DC17_VALUE 0xD -+#define MC_DC18_VALUE 0x301 -+#define MC_DC19_VALUE 0x200 -+#define MC_DC20_VALUE 0xA03 -+#define MC_DC21_VALUE 0x1900 -+#define MC_DC22_VALUE 0x1919 -+#define MC_DC23_VALUE 0x0 -+#define MC_DC24_VALUE 0x66 -+#define MC_DC25_VALUE 0x0 -+#define MC_DC26_VALUE 0x0 -+#define MC_DC27_VALUE 0x0 -+#define MC_DC28_VALUE 0x50A -+#define MC_DC29_VALUE 0x2D65 -+#define MC_DC30_VALUE 0x81B1 -+#define MC_DC31_VALUE 0x0 -+#define MC_DC32_VALUE 0x0 -+#define MC_DC33_VALUE 0x0 -+#define MC_DC34_VALUE 0x0 -+#define MC_DC35_VALUE 0x0 -+#define MC_DC36_VALUE 0x0 -+#define MC_DC37_VALUE 0x0 -+#define MC_DC38_VALUE 0x0 -+#define MC_DC39_VALUE 0x0 -+#define MC_DC40_VALUE 0x0 -+#define MC_DC41_VALUE 0x0 -+#define MC_DC42_VALUE 0x0 -+#define MC_DC43_VALUE 0x0 -+#define MC_DC44_VALUE 0x0 -+#define MC_DC45_VALUE 0x600 -+#define MC_DC46_VALUE 0x0 ---- /dev/null -+++ b/board/zyxel/p2601hnfx/p2601hnfx.c -@@ -0,0 +1,51 @@ -+/* -+ * Copyright (C) 2013 Luka Perkov -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+int board_early_init_f(void) -+{ -+ return 0; -+} -+ -+int checkboard(void) -+{ -+ puts("Board: " CONFIG_BOARD_NAME "\n"); -+ ltq_chip_print_info(); -+ -+ return 0; -+} -+ -+static const struct ltq_eth_port_config eth_port_config[] = { -+ /* MAC0: REALTEK RTL8306 switch */ -+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII }, -+}; -+ -+static const struct ltq_eth_board_config eth_board_config = { -+ .ports = eth_port_config, -+ .num_ports = ARRAY_SIZE(eth_port_config), -+}; -+ -+int board_eth_init(bd_t *bis) -+{ -+ return ltq_eth_initialize(ð_board_config); -+} -+ -+static struct switch_device rtl8306_dev = { -+ .name = "rtl8306", -+ .cpu_port = 5, -+ .port_mask = 0xF, -+}; -+ -+int board_switch_init(void) -+{ -+ return switch_device_register(&rtl8306_dev); -+} ---- a/boards.cfg -+++ b/boards.cfg -@@ -499,6 +499,10 @@ Active mips mips32 - - Active mips mips32 arx100 zte zxv10h201l zxv10h201l_nor zxv10h201l:SYS_BOOT_NOR Luka Perkov - Active mips mips32 arx100 zte zxv10h201l zxv10h201l_ram zxv10h201l:SYS_BOOT_RAM Luka Perkov - Active mips mips32 arx100 zte zxv10h201l zxv10h201l_zte zxv10h201l:SYS_BOOT_ZTE Luka Perkov -+Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_nor p2601hnfx:SYS_BOOT_NOR Luka Perkov -+Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_norspl p2601hnfx:SYS_BOOT_NORSPL Luka Perkov -+Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_ram p2601hnfx:SYS_BOOT_RAM Luka Perkov -+Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_zyxel p2601hnfx:SYS_BOOT_ZYXEL Luka Perkov - Active mips mips32 arx100 zyxel p661hnufx p661hnufx_ram p661hnufx:SYS_BOOT_RAM Luka Perkov - Active mips mips32 arx100 zyxel p661hnufx p661hnufx_sfspl p661hnufx:SYS_BOOT_SFSPL Luka Perkov - Active mips mips32 arx100 zyxel p661hnufx p661hnufx_zyxel p661hnufx:SYS_BOOT_ZYXEL Luka Perkov ---- /dev/null -+++ b/include/configs/p2601hnfx.h -@@ -0,0 +1,67 @@ -+/* -+ * Copyright (C) 2013 Luka Perkov -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#define CONFIG_MACH_TYPE "P-2601HN-Fx" -+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE -+#define CONFIG_BOARD_NAME "ZyXEL P-2601HN-Fx" -+ -+/* Configure SoC */ -+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ -+ -+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */ -+ -+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */ -+#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */ -+#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */ -+ -+/* Environment */ -+#if defined(CONFIG_SYS_BOOT_NOR) -+#define CONFIG_ENV_IS_IN_FLASH -+#define CONFIG_ENV_OVERWRITE -+#define CONFIG_ENV_OFFSET (256 * 1024) -+#define CONFIG_ENV_SECT_SIZE (128 * 1024) -+#elif defined(CONFIG_SYS_BOOT_NORSPL) -+#define CONFIG_ENV_IS_IN_FLASH -+#define CONFIG_ENV_OVERWRITE -+#define CONFIG_ENV_OFFSET (128 * 1024) -+#define CONFIG_ENV_SECT_SIZE (128 * 1024) -+#else -+#define CONFIG_ENV_IS_NOWHERE -+#endif -+ -+#define CONFIG_ENV_SIZE (8 * 1024) -+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR -+ -+#if defined(CONFIG_SYS_BOOT_ZYXEL) -+#define CONFIG_SYS_TEXT_BASE 0x80800000 -+#define CONFIG_SKIP_LOWLEVEL_INIT -+#endif -+ -+/* Console */ -+#define CONFIG_LTQ_ADVANCED_CONSOLE -+#define CONFIG_BAUDRATE 115200 -+#define CONFIG_CONSOLE_ASC 1 -+#define CONFIG_CONSOLE_DEV "ttyLTQ1" -+ -+/* Pull in default board configs for Lantiq XWAY Danube */ -+#include -+#include -+ -+/* Pull in default OpenWrt configs for Lantiq SoC */ -+#include "openwrt-lantiq-common.h" -+ -+#define CONFIG_ENV_UPDATE_UBOOT_NOR \ -+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0" -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ CONFIG_ENV_LANTIQ_DEFAULTS \ -+ CONFIG_ENV_UPDATE_UBOOT_NOR \ -+ "kernel_addr=0xB0040000\0" -+ -+#endif /* __CONFIG_H */ diff --git a/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch b/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch index 3a0d8a631b..a1c0bdede0 100644 --- a/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch +++ b/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch @@ -220,10 +220,10 @@ Signed-off-by: Luka Perkov +} --- a/boards.cfg +++ b/boards.cfg -@@ -540,6 +540,8 @@ Active mips mips32 vrx20 - Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_nandspl zxhnh367n:SYS_BOOT_NANDSPL Luka Perkov - Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_ram zxhnh367n:SYS_BOOT_RAM Luka Perkov - Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_zte zxhnh367n:SYS_BOOT_ZTE Luka Perkov +@@ -527,6 +527,8 @@ Active mips mips32 vrx20 + Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck + Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck + Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck +Active mips mips32 vrx200 zyxel p2812hnufx p2812hnufx_nandspl p2812hnufx:SYS_BOOT_NANDSPL Luka Perkov +Active mips mips32 vrx200 zyxel p2812hnufx p2812hnufx_ram p2812hnufx:SYS_BOOT_RAM Luka Perkov Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN - diff --git a/package/boot/uboot-lantiq/patches/0036-MIPS-add-board-support-for-Arcadyan-Easybox-904.patch b/package/boot/uboot-lantiq/patches/0036-MIPS-add-board-support-for-Arcadyan-Easybox-904.patch deleted file mode 100644 index a9cc6d9e07..0000000000 --- a/package/boot/uboot-lantiq/patches/0036-MIPS-add-board-support-for-Arcadyan-Easybox-904.patch +++ /dev/null @@ -1,277 +0,0 @@ -From 60856fa8f9866f292df740ea98752a70738eb59a Mon Sep 17 00:00:00 2001 -From: Daniel Schwierzeck -Date: Fri, 9 Aug 2013 18:11:07 +0200 -Subject: MIPS: add board support for Arcadyan Easybox 904 - -Signed-off-by: Daniel Schwierzeck - ---- /dev/null -+++ b/board/arcadyan/easybox904/Makefile -@@ -0,0 +1,27 @@ -+# -+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).o -+ -+COBJS = $(BOARD).o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### ---- /dev/null -+++ b/board/arcadyan/easybox904/config.mk -@@ -0,0 +1,7 @@ -+# -+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR) ---- /dev/null -+++ b/board/arcadyan/easybox904/ddr_settings.h -@@ -0,0 +1,68 @@ -+/* -+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#define MC_CCR00_VALUE 0x101 -+#define MC_CCR01_VALUE 0x1000100 -+#define MC_CCR02_VALUE 0x1010000 -+#define MC_CCR03_VALUE 0x101 -+#define MC_CCR04_VALUE 0x1000000 -+#define MC_CCR05_VALUE 0x1000101 -+#define MC_CCR06_VALUE 0x1000100 -+#define MC_CCR07_VALUE 0x1010000 -+#define MC_CCR08_VALUE 0x1000101 -+#define MC_CCR09_VALUE 0x1000000 -+#define MC_CCR10_VALUE 0x2000100 -+#define MC_CCR11_VALUE 0x2000300 -+#define MC_CCR12_VALUE 0x30000 -+#define MC_CCR13_VALUE 0x202 -+#define MC_CCR14_VALUE 0x7080A0F -+#define MC_CCR15_VALUE 0x2040F -+#define MC_CCR16_VALUE 0x40000 -+#define MC_CCR17_VALUE 0x70102 -+#define MC_CCR18_VALUE 0x4020002 -+#define MC_CCR19_VALUE 0x30302 -+#define MC_CCR20_VALUE 0x8000700 -+#define MC_CCR21_VALUE 0x40F020A -+#define MC_CCR22_VALUE 0x0 -+#define MC_CCR23_VALUE 0xC020000 -+#define MC_CCR24_VALUE 0x4401503 -+#define MC_CCR25_VALUE 0x0 -+#define MC_CCR26_VALUE 0x0 -+#define MC_CCR27_VALUE 0x6420000 -+#define MC_CCR28_VALUE 0x0 -+#define MC_CCR29_VALUE 0x0 -+#define MC_CCR30_VALUE 0x798 -+#define MC_CCR31_VALUE 0x0 -+#define MC_CCR32_VALUE 0x0 -+#define MC_CCR33_VALUE 0x650000 -+#define MC_CCR34_VALUE 0x200C8 -+#define MC_CCR35_VALUE 0x1536B0 -+#define MC_CCR36_VALUE 0xC8 -+#define MC_CCR37_VALUE 0xC351 -+#define MC_CCR38_VALUE 0x0 -+#define MC_CCR39_VALUE 0x142404 -+#define MC_CCR40_VALUE 0x142604 -+#define MC_CCR41_VALUE 0x141B42 -+#define MC_CCR42_VALUE 0x141B42 -+#define MC_CCR43_VALUE 0x566504 -+#define MC_CCR44_VALUE 0x566504 -+#define MC_CCR45_VALUE 0x565F17 -+#define MC_CCR46_VALUE 0x565F17 -+#define MC_CCR47_VALUE 0x0 -+#define MC_CCR48_VALUE 0x0 -+#define MC_CCR49_VALUE 0x0 -+#define MC_CCR50_VALUE 0x0 -+#define MC_CCR51_VALUE 0x0 -+#define MC_CCR52_VALUE 0x133 -+#define MC_CCR53_VALUE 0xF3014B27 -+#define MC_CCR54_VALUE 0xF3014B27 -+#define MC_CCR55_VALUE 0xF3014B27 -+#define MC_CCR56_VALUE 0xF3014B27 -+#define MC_CCR57_VALUE 0x7C00301 -+#define MC_CCR58_VALUE 0x7C00301 -+#define MC_CCR59_VALUE 0x7C00301 -+#define MC_CCR60_VALUE 0x7C00301 -+#define MC_CCR61_VALUE 0x4 ---- /dev/null -+++ b/board/arcadyan/easybox904/easybox904.c -@@ -0,0 +1,98 @@ -+/* -+ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if defined(CONFIG_SPL_BUILD) -+#define do_gpio_init 1 -+#define do_pll_init 1 -+#define do_dcdc_init 0 -+#elif defined(CONFIG_SYS_BOOT_RAM) -+#define do_gpio_init 1 -+#define do_pll_init 0 -+#define do_dcdc_init 1 -+#else -+#define do_gpio_init 0 -+#define do_pll_init 0 -+#define do_dcdc_init 1 -+#endif -+ -+static inline void gpio_init(void) -+{ -+ /* EBU.FL_CS1 as output for NAND CE */ -+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); -+ /* EBU.FL_A23 as output for NAND CLE */ -+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); -+ /* EBU.FL_A24 as output for NAND ALE */ -+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); -+ /* GPIO 3.0 as input for NAND Ready Busy */ -+ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN); -+ /* GPIO 3.1 as output for NAND Read */ -+ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); -+} -+ -+int board_early_init_f(void) -+{ -+ if (do_gpio_init) -+ gpio_init(); -+ -+ if (do_pll_init) -+ ltq_pll_init(); -+ -+ if (do_dcdc_init) -+ ltq_dcdc_init(0x7F); -+ -+ return 0; -+} -+ -+int checkboard(void) -+{ -+ puts("Board: " CONFIG_BOARD_NAME "\n"); -+ ltq_chip_print_info(); -+ -+ return 0; -+} -+ -+static const struct ltq_eth_port_config eth_port_config[] = { -+ /* GMAC0: ??? */ -+ { 0, 0x0, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE }, -+ /* GMAC1: ??? */ -+ { 1, 0x1, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE }, -+ /* GMAC2: ??? */ -+ { 2, 0x11, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE }, -+ /* GMAC3: unused */ -+ { 3, 0x0, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE }, -+ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for WANoE port */ -+ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII }, -+ /* GMAC5: ??? */ -+ { 5, 0x5, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE }, -+}; -+ -+static const struct ltq_eth_board_config eth_board_config = { -+ .ports = eth_port_config, -+ .num_ports = ARRAY_SIZE(eth_port_config), -+}; -+ -+int board_eth_init(bd_t * bis) -+{ -+ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0; -+ const ulong fw_ge_addr = 0x80FE0000; -+ -+ ltq_gphy_phy11g_a2x_load(fw_ge_addr); -+ -+ ltq_cgu_gphy_clk_src(clk); -+ -+ ltq_rcu_gphy_boot(0, fw_ge_addr); -+ ltq_rcu_gphy_boot(1, fw_ge_addr); -+ -+ return ltq_eth_initialize(ð_board_config); -+} ---- a/boards.cfg -+++ b/boards.cfg -@@ -529,6 +529,7 @@ Active mips mips32 incai - Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk - Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk - Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk -+Active mips mips32 vrx200 arcadyan easybox904 easybox904_ram easybox904:SYS_BOOT_RAM Daniel Schwierzeck - Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck - Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck - Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck ---- /dev/null -+++ b/include/configs/easybox904.h -@@ -0,0 +1,45 @@ -+/* -+ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#define CONFIG_MACH_TYPE "EASYBOX904" -+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE -+#define CONFIG_BOARD_NAME "Arcadyan EasyBox 904" -+ -+/* Configure SoC */ -+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ -+ -+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */ -+ -+#define CONFIG_LTQ_SUPPORT_NAND_FLASH -+ -+#define CONFIG_SYS_DRAM_PROBE -+ -+/* Environment */ -+#define CONFIG_ENV_IS_NOWHERE -+ -+#define CONFIG_ENV_SIZE (8 * 1024) -+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR -+ -+/* Console */ -+#define CONFIG_LTQ_ADVANCED_CONSOLE -+#define CONFIG_BAUDRATE 115200 -+#define CONFIG_CONSOLE_ASC 1 -+#define CONFIG_CONSOLE_DEV "ttyLTQ1" -+ -+/* Pull in default board configs for Lantiq XWAY VRX200 */ -+#include -+#include -+ -+/* Pull in default OpenWrt configs for Lantiq SoC */ -+#include "openwrt-lantiq-common.h" -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ CONFIG_ENV_LANTIQ_DEFAULTS -+ -+#endif /* __CONFIG_H */ diff --git a/package/boot/uboot-lantiq/patches/0043-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch b/package/boot/uboot-lantiq/patches/0043-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch index adb894f018..eb688a9caa 100644 --- a/package/boot/uboot-lantiq/patches/0043-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch +++ b/package/boot/uboot-lantiq/patches/0043-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch @@ -253,10 +253,10 @@ +#define MC_CCR61_VALUE 0x4 --- a/boards.cfg +++ b/boards.cfg -@@ -542,6 +542,9 @@ +@@ -531,6 +531,9 @@ Active mips mips32 incai + Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk - Active mips mips32 vrx200 arcadyan easybox904 easybox904_ram easybox904:SYS_BOOT_RAM Daniel Schwierzeck +Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_brn vgv7510kw22:SYS_BOOT_BRN Martin Blumenstingl +Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_nor vgv7510kw22:SYS_BOOT_NOR Martin Blumenstingl +Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_ram vgv7510kw22:SYS_BOOT_RAM Martin Blumenstingl -- 2.25.1