From 741e0fd7a16bf8875ab10d7773bc8aed9b63d1d8 Mon Sep 17 00:00:00 2001 From: Zoltan Herpai Date: Sat, 10 Jan 2015 19:56:30 +0000 Subject: [PATCH] sunxi: change bananapro DTS to use the already published patch, clean up 3.18 config of generic symbols Signed-off-by: Zoltan HERPAI SVN-Revision: 43922 --- target/linux/sunxi/config-3.18 | 42 +----- ....diff => 301-dt-sun7i-add-bananapro.patch} | 121 ++++++++++++------ 2 files changed, 86 insertions(+), 77 deletions(-) rename target/linux/sunxi/patches-3.18/{301-add-bananapro.diff => 301-dt-sun7i-add-bananapro.patch} (63%) diff --git a/target/linux/sunxi/config-3.18 b/target/linux/sunxi/config-3.18 index 44b5d89800..68f15939d7 100644 --- a/target/linux/sunxi/config-3.18 +++ b/target/linux/sunxi/config-3.18 @@ -129,12 +129,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_UART_8250 is not set # CONFIG_DEBUG_UART_PL01X is not set # CONFIG_DEBUG_USER is not set -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_IOSCHED="cfq" @@ -163,7 +157,6 @@ CONFIG_FRAME_WARN=2048 CONFIG_FREEZER=y CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y -CONFIG_GARP=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -250,7 +243,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_I2C_SUN6I_P2WI is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -# CONFIG_IMX_IPUV3_CORE is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_INPUT=y # CONFIG_INPUT_AXP20X_PEK is not set @@ -260,23 +252,15 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_INTEL_SOC_PMIC is not set CONFIG_IOMMU_HELPER=y CONFIG_IOSCHED_CFQ=y CONFIG_IPC_NS=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_BOOTP is not set -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_RARP is not set CONFIG_IRQCHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_WORK=y CONFIG_JBD2=y CONFIG_KALLSYMS=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_XZ is not set CONFIG_KERNFS=y # CONFIG_KEYBOARD_GPIO is not set CONFIG_KEYBOARD_SUN4I_LRADC=y @@ -390,12 +374,6 @@ CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_RCU_BOOST is not set CONFIG_RCU_CPU_STALL_VERBOSE=y CONFIG_RCU_STALL_COMMON=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZ4=y -CONFIG_RD_LZMA=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_IRQ=y @@ -417,6 +395,7 @@ CONFIG_SATA_AHCI_PLATFORM=y CONFIG_SCHED_HRTICK=y CONFIG_SCSI=y CONFIG_SDIO_UART=y +# CONFIG_SECCOMP is not set CONFIG_SECURITYFS=y # CONFIG_SENSORS_PWM_FAN is not set CONFIG_SERIAL_8250_DW=y @@ -456,24 +435,10 @@ CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_TASK_XACCT=y -# CONFIG_TCP_CONG_ADVANCED is not set # CONFIG_THUMB2_KERNEL is not set CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_TOUCHSCREEN_AR1021_I2C is not set -# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set -# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set -# CONFIG_TOUCHSCREEN_BU21013 is not set -# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set -# CONFIG_TOUCHSCREEN_DYNAPRO is not set -# CONFIG_TOUCHSCREEN_EGALAX is not set -# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set -# CONFIG_TOUCHSCREEN_MAX11801 is not set -# CONFIG_TOUCHSCREEN_PIXCIR is not set -# CONFIG_TOUCHSCREEN_ST1232 is not set CONFIG_TOUCHSCREEN_SUN4I=y -# CONFIG_TOUCHSCREEN_TSC2005 is not set -# CONFIG_TOUCHSCREEN_TSC_SERIO is not set CONFIG_TREE_PREEMPT_RCU=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_UID16=y @@ -496,7 +461,6 @@ CONFIG_UTS_NS=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_VFP=y CONFIG_VFPv3=y -CONFIG_VLAN_8021Q_GVRP=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_VT=y CONFIG_VT_CONSOLE=y @@ -509,10 +473,6 @@ CONFIG_XPS=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_X86=y CONFIG_ZBOOT_ROM_BSS=0 CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/sunxi/patches-3.18/301-add-bananapro.diff b/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch similarity index 63% rename from target/linux/sunxi/patches-3.18/301-add-bananapro.diff rename to target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch index 47454e974e..70283a5f7b 100644 --- a/target/linux/sunxi/patches-3.18/301-add-bananapro.diff +++ b/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch @@ -1,38 +1,58 @@ -diff -ruN old/arch/arm/boot/dts/Makefile new/arch/arm/boot/dts/Makefile ---- old/arch/arm/boot/dts/Makefile 2015-01-06 09:29:23.612462619 +0100 -+++ new/arch/arm/boot/dts/Makefile 2015-01-06 09:29:36.316254352 +0100 -@@ -436,6 +436,7 @@ - sun6i-a31-m9.dtb +From 3613d535a77270eaf15a5f988a48434c7d1530f2 Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Wed, 7 Jan 2015 20:44:52 +0100 +Subject: [PATCH] ARM: dts: sun7i: Add dts file for Bananapro board + +Add support for the new Bananapro A20 development board from lemaker.org. +This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for +OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, +3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi. + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/sun7i-a20-bananapro.dts | 261 ++++++++++++++++++++++++++++++ + 2 files changed, 262 insertions(+) + create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapro.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 40d2901..b3dcf3f 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -466,6 +466,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ + sun6i-a31s-cs908.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ + sun7i-a20-bananapro.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ -diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/sun7i-a20-bananapro.dts ---- old/arch/arm/boot/dts/sun7i-a20-bananapro.dts 1970-01-01 01:00:00.000000000 +0100 -+++ new/arch/arm/boot/dts/sun7i-a20-bananapro.dts 2015-01-06 09:31:18.290582574 +0100 -@@ -0,0 +1,232 @@ +diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts +new file mode 100644 +index 0000000..3b4764d +--- /dev/null ++++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts +@@ -0,0 +1,261 @@ +/* -+ * Copyright 2014 Zoltan HERPAI ++ * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * -+ * a) This library is free software; you can redistribute it and/or ++ * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * -+ * This library is distributed in the hope that it will be useful, ++ * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public -+ * License along with this library; if not, write to the Free ++ * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * @@ -77,7 +97,7 @@ diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/su + + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 0>; /* PH10 */ @@ -86,23 +106,12 @@ diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/su + }; + + mmc3: mmc@01c12000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ + pinctrl-names = "default"; -+ pinctrl-0 = <&mmc3_pins_a> ++ pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; -+ -+ brcmf: bcrmf@1 { -+ reg = <1>; -+ ccompatible = "brcm,bcm4329-fmac"; -+ interrupt-parent = <&pio>; -+ interrupts = <10 8>; /* PH10 / EINT10 * taken from https://github.com/Bananian/fex/blob/master/BananaPro/BananaPro.fex.otg-off */ -+ interrupt-names = "host-wake"; -+ }; + }; + + usbphy: phy@01c13400 { @@ -132,22 +141,43 @@ diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/su + }; + + pinctrl@01c20800 { -+ mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { ++ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { ++ allwinner,pins = "PH0"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { ++ allwinner,pins = "PH1"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + -+ gmac_power_pin_bananapro: gmac_power_pin@0 { ++ vmmc3_pin_bananapro: vmmc3_pin@0 { ++ allwinner,pins = "PH22"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ gmac_power_pin_bananapi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + -+ led_pins_bananapro: led_pins@0 { -+ allwinner,pins = "PH24"; ++ led_pins_bananapi: led_pins@0 { ++ allwinner,pins = "PH24", "PG2"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; @@ -166,9 +196,9 @@ diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/su + status = "okay"; + }; + -+ uart3: serial@01c28c00 { ++ uart2: serial@01c28800 { + pinctrl-names = "default"; -+ pinctrl-0 = <&uart3_pins_b>; ++ pinctrl-0 = <&uart2_pins_a>; + status = "okay"; + }; + @@ -217,31 +247,50 @@ diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/su + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_bananapro>; ++ pinctrl-0 = <&led_pins_bananapi>; + + green { -+ label = "bananapro:green:usr"; ++ label = "bananapi:green:usr"; + gpios = <&pio 7 24 0>; + }; ++ blue { ++ label = "bananapi:blue:usr"; ++ gpios = <&pio 6 2 0>; ++ }; + }; + + reg_usb1_vbus: usb1-vbus { ++ pinctrl-0 = <&usb1_vbus_pin_bananapro>; ++ gpio = <&pio 7 0 0>; /* PH0 */ + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { ++ pinctrl-0 = <&usb2_vbus_pin_bananapro>; ++ gpio = <&pio 7 1 0>; /* PH1 */ + status = "okay"; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_bananapro>; ++ pinctrl-0 = <&gmac_power_pin_bananapi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; -+ startup-delay-us = <50000>; ++ startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 0>; + }; ++ ++ reg_vmmc3: vmmc3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vmmc3_pin_bananapro>; ++ regulator-name = "vmmc3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ enable-active-high; ++ gpio = <&pio 7 22 0>; ++ }; +}; -- 2.25.1