From 7191d453489f426942f52c3704575f7b4c6ed1dc Mon Sep 17 00:00:00 2001 From: Bhaskar Upadhaya Date: Wed, 23 May 2018 11:03:29 +0530 Subject: [PATCH] board: Kconfig: Re-Arrangement of PPA firmware and header addresses PPA firmware and header address may vary depending upon different boards, configure ppa firmware and header address in board specific Kconfig. Signed-off-by: Vinitha V Pillai Signed-off-by: Jagdish Gediya Signed-off-by: Bhaskar Upadhaya Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 34 ----------------------- board/freescale/ls1012afrdm/Kconfig | 4 +++ board/freescale/ls1012aqds/Kconfig | 3 ++ board/freescale/ls1012ardb/Kconfig | 14 ++++++++++ board/freescale/ls1043aqds/Kconfig | 16 +++++++++++ board/freescale/ls1043ardb/Kconfig | 14 ++++++++++ board/freescale/ls1046aqds/Kconfig | 16 +++++++++++ board/freescale/ls1046ardb/Kconfig | 15 ++++++++++ board/freescale/ls1088a/Kconfig | 28 +++++++++++++++++++ board/freescale/ls2080aqds/Kconfig | 16 +++++++++++ board/freescale/ls2080ardb/Kconfig | 31 ++++++++++----------- 11 files changed, 141 insertions(+), 50 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 546de33b72..f2111fadc0 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -261,40 +261,6 @@ config SYS_LS_PPA_FW_IN_NAND endchoice -config SYS_LS_PPA_FW_ADDR - hex "Address of PPA firmware loading from" - depends on FSL_LS_PPA - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A - default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A - default 0x60400000 if SYS_LS_PPA_FW_IN_XIP - default 0x400000 if SYS_LS_PPA_FW_IN_MMC - default 0x400000 if SYS_LS_PPA_FW_IN_NAND - - help - If the PPA firmware locate at XIP flash, such as NOR or - QSPI flash, this address is a directly memory-mapped. - If it is in a serial accessed flash, such as NAND and SD - card, it is a byte offset. - -config SYS_LS_PPA_ESBC_ADDR - hex "hdr address of PPA firmware loading from" - depends on FSL_LS_PPA && CHAIN_OF_TRUST - default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A - default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A - default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A - default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A - default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A - default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A - default 0x680000 if SYS_LS_PPA_FW_IN_MMC - default 0x680000 if SYS_LS_PPA_FW_IN_NAND - help - If the PPA header firmware locate at XIP flash, such as NOR or - QSPI flash, this address is a directly memory-mapped. - If it is in a serial accessed flash, such as NAND and SD - card, it is a byte offset. - config LS_PPA_ESBC_HDR_SIZE hex "Length of PPA ESBC header" depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig index 22d521b6cf..fd33807ae3 100644 --- a/board/freescale/ls1012afrdm/Kconfig +++ b/board/freescale/ls1012afrdm/Kconfig @@ -12,6 +12,10 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012afrdm" +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + if FSL_PFE config BOARD_SPECIFIC_OPTIONS # dummy diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig index c0b12ed78f..b702fb2740 100644 --- a/board/freescale/ls1012aqds/Kconfig +++ b/board/freescale/ls1012aqds/Kconfig @@ -12,6 +12,9 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012aqds" +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 if FSL_PFE diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig index 493d4779bc..4cd66bd548 100644 --- a/board/freescale/ls1012ardb/Kconfig +++ b/board/freescale/ls1012ardb/Kconfig @@ -12,6 +12,16 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012ardb" +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA Firmware HDR Addr" + default 0x40680000 +endif + if FSL_PFE config BOARD_SPECIFIC_OPTIONS # dummy @@ -59,6 +69,10 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012a2g5rdb" +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + if FSL_PFE config BOARD_SPECIFIC_OPTIONS # dummy diff --git a/board/freescale/ls1043aqds/Kconfig b/board/freescale/ls1043aqds/Kconfig index 95d288812a..182900efb7 100644 --- a/board/freescale/ls1043aqds/Kconfig +++ b/board/freescale/ls1043aqds/Kconfig @@ -12,6 +12,22 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1043aqds" +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x60400000 if SYS_LS_PPA_FW_IN_XIP + default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND + +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA Firmware HDR Addr" + default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x60680000 if SYS_LS_PPA_FW_IN_XIP + default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND +endif +endif + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig index 1bab7cab61..3d9e295c4e 100644 --- a/board/freescale/ls1043ardb/Kconfig +++ b/board/freescale/ls1043ardb/Kconfig @@ -22,6 +22,20 @@ config SYS_HAS_ARMV8_SECURE_BASE If enabled, please also define the value for ARMV8_SECURE_BASE, for LS1043ARDB, it could be some address in OCRAM. +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x60400000 if SYS_LS_PPA_FW_IN_XIP + default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND + +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA Firmware HDR Addr" + default 0x60680000 if SYS_LS_PPA_FW_IN_XIP + default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND +endif +endif + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls1046aqds/Kconfig b/board/freescale/ls1046aqds/Kconfig index 070827d7b9..1616dcc683 100644 --- a/board/freescale/ls1046aqds/Kconfig +++ b/board/freescale/ls1046aqds/Kconfig @@ -12,6 +12,22 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1046aqds" +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x60400000 if SYS_LS_PPA_FW_IN_XIP + default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND + +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA Firmware HDR Addr" + default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x60680000 if SYS_LS_PPA_FW_IN_XIP + default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND +endif +endif + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls1046ardb/Kconfig b/board/freescale/ls1046ardb/Kconfig index b9f2ed7e4b..4c31e0e885 100644 --- a/board/freescale/ls1046ardb/Kconfig +++ b/board/freescale/ls1046ardb/Kconfig @@ -12,5 +12,20 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1046ardb" + +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND + +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA Firmware HDR Addr" + default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND +endif +endif + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig index 4479dd0758..8bb828e3fd 100644 --- a/board/freescale/ls1088a/Kconfig +++ b/board/freescale/ls1088a/Kconfig @@ -12,6 +12,20 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1088aqds" +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP + default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND + +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA Firmware HDR Addr" + default 0x20680000 if SYS_LS_PPA_FW_IN_XIP + default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND +endif +endif + source "board/freescale/common/Kconfig" endif @@ -29,5 +43,19 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1088ardb" +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP + default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND + +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA Firmware HDR Addr" + default 0x20680000 if SYS_LS_PPA_FW_IN_XIP + default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND +endif +endif + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls2080aqds/Kconfig b/board/freescale/ls2080aqds/Kconfig index e2b2c8d089..6b2b64581d 100644 --- a/board/freescale/ls2080aqds/Kconfig +++ b/board/freescale/ls2080aqds/Kconfig @@ -13,6 +13,22 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls2080aqds" +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x580400000 if SYS_LS_PPA_FW_IN_XIP + default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND + +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA Firmware HDR Addr" + default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x580680000 if SYS_LS_PPA_FW_IN_XIP + default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND +endif +endif + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig index 8f64642593..678d582573 100644 --- a/board/freescale/ls2080ardb/Kconfig +++ b/board/freescale/ls2080ardb/Kconfig @@ -1,5 +1,4 @@ - -if TARGET_LS2080ARDB +if TARGET_LS2080ARDB || TARGET_LS2081ARDB config SYS_BOARD default "ls2080ardb" @@ -15,21 +14,21 @@ config SYS_CONFIG_NAME source "board/freescale/common/Kconfig" +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x580400000 if SYS_LS_PPA_FW_IN_XIP + default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND + +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA Firmware HDR Addr" + default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x580680000 if SYS_LS_PPA_FW_IN_XIP + default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND +endif endif - -if TARGET_LS2081ARDB - -config SYS_BOARD - default "ls2080ardb" - -config SYS_VENDOR - default "freescale" - -config SYS_SOC - default "fsl-layerscape" - -config SYS_CONFIG_NAME - default "ls2080ardb" source "board/freescale/common/Kconfig" -- 2.25.1