From 716897760fe41c350f55564a73d2e58dafd1ee53 Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Thu, 20 Feb 2014 18:00:57 +0800 Subject: [PATCH] esdhc/usdhc: Fix PIO mode bug in fsl_esdhc driver When configure the fsl_esdhc driver to PIO mode by defining "CONFIG_SYS_FSL_ESDHC_USE_PIO", the SD/MMC read and write will fail. Two bugs in the driver to cause the issue: 1. The read buffer was invalidated after reading from DATAPORT register, which should be only applied to DMA mode. The valid data in cache was overwritten by physical memory. 2. The watermarks are not set in PIO mode, will cause according state not be set. Acked-by: Pantelis Antoniou Signed-off-by: Ye.Li --- drivers/mmc/fsl_esdhc.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 50cba64d99..dca28f4495 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -174,7 +174,7 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) int timeout; struct fsl_esdhc_cfg *cfg = mmc->priv; struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; -#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO + uint wml_value; wml_value = data->blocksize/4; @@ -184,12 +184,15 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) wml_value = WML_RD_WML_MAX_VAL; esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value); +#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO esdhc_write32(®s->dsaddr, (u32)data->dest); +#endif } else { +#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO flush_dcache_range((ulong)data->src, (ulong)data->src+data->blocks *data->blocksize); - +#endif if (wml_value > WML_WR_WML_MAX) wml_value = WML_WR_WML_MAX_VAL; if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) { @@ -199,19 +202,10 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK, wml_value << 16); +#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO esdhc_write32(®s->dsaddr, (u32)data->src); +#endif } -#else /* CONFIG_SYS_FSL_ESDHC_USE_PIO */ - if (!(data->flags & MMC_DATA_READ)) { - if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) { - printf("\nThe SD card is locked. " - "Can not write to a locked card.\n\n"); - return TIMEOUT; - } - esdhc_write32(®s->dsaddr, (u32)data->src); - } else - esdhc_write32(®s->dsaddr, (u32)data->dest); -#endif /* CONFIG_SYS_FSL_ESDHC_USE_PIO */ esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize); @@ -388,9 +382,10 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) goto out; } } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE); -#endif + if (data->flags & MMC_DATA_READ) check_and_invalidate_dcache_range(cmd, data); +#endif } out: -- 2.25.1